AlphaTec®

Ansell

Deli

ELECOM

Murr Elektronik

Office & School Consumables

office-school-consumables

Art & School Supplies

art-school-supplies

IT & Electronics

it-electronics

Ethernet Cable

ethernet-cable

Safety

safety

Hazmat

hazmat

IT Accessories

it-accessories

Protective Suits

protective-suits

Writing Materials

writing-materials

 ANSELL ALPHATEC 2000-WH STD COVERALL HOOD 

Previously known as Microgard 2000 Chemical Protective Coverall

MICROGARD® 2000 STANDARD provides both protection and comfort with exceptional liquid and particulate protection, making it ideal for a wide range of industrial applications.

MICROGARD® 2000 is designed to allow water vapor (perspiration) to escape from the suit while withstanding saturation from liquid chemicals and filtering 100% of particulates down to 0.01 microns in size.*

The use of a high-quality, two-way stretch microporous film provides an effective liquid and particle barrier combined with a high water vapor transmission rate from inside to outside.

Proven protective barrier against low-concentration liquid chemicals and liquid & particulate biological hazards.

Comfortable to wear, featuring moisture vapor permeable fabric ("breathable") to help reduce the risk of heat stress.

Optimized body fit, improving wearer comfort and safety.

Anti-static, tested according to EN 1149-5.

Low linting to help reduce the risk of cross-contamination in critical areas.

Silicone-free, critical in spray painting applications.

Bound Seams Superior strength, liquid, and particle barrier.

MICROGARD® 2000 COMFORT coveralls meet the following European Norms:

Type 6 EN13034 Low level spray-tight suit

EN1073-2 Barrier to radioactive particulates - Class 2

MICROGARD® 2000 is extensively tested in accordance with statutory requirements, including physical performance attributes and barriers to hazardous substances. The following tables outline the results obtained in independent laboratories according to European test methods.

ANSELL ALPHATEC 2000-WH STD COVERALL HOOD Previously known as Microgard 2000 Chemical Protective CoverallMICROGARD® 2000 STANDARD provides both protection and comfort with exceptional liquid and particulate protection, making it ideal for a wide range of industrial applications.MICROGARD® 2000 is designed to allow water vapor (perspiration) to escape from the suit while withstanding saturation from liquid chemicals and filtering 100% of particulates down to 0.01 microns in size.*The use of a high-quality, two-way stretch microporous film provides an effective liquid and particle barrier combined with a high water vapor transmission rate from inside to outside.Features &amp; Benefits<ul class="md-block-unordered-list-item"><li>Proven protective barrier against low-concentration liquid chemicals and liquid &amp; particulate biological hazards.</li><li>Comfortable to wear, featuring moisture vapor permeable fabric (&quot;breathable&quot;) to help reduce the risk of heat stress.</li><li>Optimized body fit, improving wearer comfort and safety.</li><li>Anti-static, tested according to EN 1149-5.</li><li>Low linting to help reduce the risk of cross-contamination in critical areas.</li><li>Silicone-free, critical in spray painting applications.</li></ul>Applications<ul class="md-block-unordered-list-item"><li>Life Sciences</li><li>Automotive</li><li>Metal Fabrication</li><li>Food Processing</li><li>Defense</li></ul>Bound Seams Superior strength, liquid, and particle barrier.MICROGARD® 2000 COMFORT coveralls meet the following European Norms:<ul class="md-block-unordered-list-item"><li>Type 5 EN ISO 13982-1 Dry particle suit</li><li>Type 6 EN13034 Low level spray-tight suit</li><li>EN14126 Barrier to infective agents</li><li>EN1073-2 Barrier to radioactive particulates - Class 2</li><li>EN1149-5 Anti-static</li><li>DIN 32781 Protection against pesticides</li></ul>MICROGARD® 2000 Technical DataMICROGARD® 2000 is extensively tested in accordance with statutory requirements, including physical performance attributes and barriers to hazardous substances. The following tables outline the results obtained in independent laboratories according to European test methods.

&nbsp;ANSELL ALPHATEC 2000-WH STD COVERALL HOOD 
Previously known as Microgard 2000 Chemical Protective Coverall
MICROGARD® 2000 STANDARD provides both protection and comfort with exceptional liquid and particulate protection, making it ideal for a wide range of industrial applications.
MICROGARD® 2000 is designed to allow water vapor (perspiration) to escape from the suit while withstanding saturation from liquid chemicals and filtering 100% of particulates down to 0.01 microns in size.*
The use of a high-quality, two-way stretch microporous film provides an effective liquid and particle barrier combined with a high water vapor transmission rate from inside to outside.
Features &amp; Benefits
<ul>
<li>Proven protective barrier against low-concentration liquid chemicals and liquid &amp; particulate biological hazards.</li>
<li>Comfortable to wear, featuring moisture vapor permeable fabric ("breathable") to help reduce the risk of heat stress.</li>
<li>Optimized body fit, improving wearer comfort and safety.</li>
<li>Anti-static, tested according to EN 1149-5.</li>
<li>Low linting to help reduce the risk of cross-contamination in critical areas.</li>
<li>Silicone-free, critical in spray painting applications.</li>
</ul>
Applications
<ul>
<li>Life Sciences</li>
<li>Automotive</li>
<li>Metal Fabrication</li>
<li>Food Processing</li>
<li>Defense</li>
</ul>
Bound Seams Superior strength, liquid, and particle barrier.
MICROGARD® 2000 COMFORT coveralls meet the following European Norms:
<ul>
<li>Type 5 EN ISO 13982-1 Dry particle suit</li>
<li>Type 6 EN13034 Low level spray-tight suit</li>
<li>EN14126 Barrier to infective agents</li>
<li>EN1073-2 Barrier to radioactive particulates - Class 2</li>
<li>EN1149-5 Anti-static</li>
<li>DIN 32781 Protection against pesticides</li>
</ul>
MICROGARD® 2000 Technical Data
MICROGARD® 2000 is extensively tested in accordance with statutory requirements, including physical performance attributes and barriers to hazardous substances. The following tables outline the results obtained in independent laboratories according to European test methods.

ALPHATEC 2000 spec

Martin

ACCSAFE

SAFETY JOGGER

DELTA PLUS

MASTER LOCK

Uvex

Others

Safety Shoes

Fall Protection

Respiratory Protection

Safety Gloves

Ear Plugs 

Safety Goggles

Padlocks & Lockout Devices

Safety Helmet

Ear Muffs

buyerIntroduction

Ansell Alphatec 2000-WH Std Coverall Hood 111

ansell alphatec 2000-wh std coverall hood 111 protective suits ansell/安塞尔 标准连体防护帽 安塞尔

ansell-alphatec-2000-wh-std-coverall-hood-111

Size

Ansell AlphaTec® 2000-WH STD COVERALL HOOD 111, (PACKING : 40PCS/CSE)

MICROGARD® 2000 STANDARD provides both protection and comfort with exceptional liquid and particulate protection. Ideal for a wide range of industrial applications.

MICROGARD® 2000 is designed to allow water vapour (perspiration) to escape from the suit yet will withstand saturation of liquid chemicals and filter 100% of particulates down to 0.01 microns in size*


The use of a high quality two-way stretch microporous film provides an effective liquid and particle barrier combined with a high water vapour transmission rate from inside to outside.

Proven protective barrier to low concentration liquid chemicals, liquid & particulate biological hazards

Comfortable to wear featuring moisture vapor permeable fabric  (“breathable”) to help reduce the risk of heat stress

Optimized body fit, improving wearer comfort and safety

Anti-static, tested according to EN 1149-5

Low linting to help reduce the risk of cross contamination in critical areas

Silicone free, critical in spray painting applications

Superior strength, liquid and particle barrier.

MICROGARD® 2000 COMFORT coveralls meet the following European Norms

 Type 6 EN13034 Low level spray tight suit

EN1073-2 Barrier to radioactive particulates - Class 2

DIN 32781 - Protection agaisnt Pesticides

MICROGARD® 2000 is extensively tested in accordance with statutory requirements, including physical performance attributes and barrier to hazardous substances. The following tables outline the results obtained in independent laboratories according to European test methods.

<h1 class="md-block-header-one">Ansell AlphaTec® 2000-WH STD COVERALL HOOD 111, (PACKING : 40PCS/CSE)</h1><h2 class="md-block-header-two">Previously known as Microgard 2000 Chemical Protective Coverall</h2>MICROGARD® 2000 STANDARD provides both protection and comfort with exceptional liquid and particulate protection. Ideal for a wide range of industrial applications.MICROGARD® 2000 is designed to allow water vapour (perspiration) to escape from the suit yet will withstand saturation of liquid chemicals and filter 100% of particulates down to 0.01 microns in size* The use of a high quality two-way stretch microporous film provides an effective liquid and particle barrier combined with a high water vapour transmission rate from inside to outside.<h3 class="md-block-header-three">Features &amp; Benefits</h3><ul class="md-block-unordered-list-item"><li>Proven protective barrier to low concentration liquid chemicals, liquid &amp; particulate biological hazards</li><li>Comfortable to wear featuring moisture vapor permeable fabric  (“breathable”) to help reduce the risk of heat stress</li><li>Optimized body fit, improving wearer comfort and safety</li><li>Anti-static, tested according to EN 1149-5</li><li>Low linting to help reduce the risk of cross contamination in critical areas</li><li>Silicone free, critical in spray painting applications</li></ul><h3 class="md-block-header-three">Applications</h3><ul class="md-block-unordered-list-item"><li>Life Sciences</li><li>Automotive</li><li>Metal fabrication</li><li>Food Processing</li><li>Defense</li></ul><h3 class="md-block-header-three">Bound Seams</h3><ul class="md-block-unordered-list-item"><li>Superior strength, liquid and particle barrier.</li></ul><h3 class="md-block-header-three">MICROGARD® 2000 COMFORT coveralls meet the following European Norms</h3><ul class="md-block-unordered-list-item"><li>Type 5 EN ISO 13982-1 Dry particle suit</li><li> Type 6 EN13034 Low level spray tight suit</li><li>EN14126 Barrier to infective agents</li><li>EN1073-2 Barrier to radioactive particulates - Class 2</li><li>EN1149-5 Anti-static and</li><li>DIN 32781 - Protection agaisnt Pesticides</li></ul><h3 class="md-block-header-three">Specifications</h3>MICROGARD® 2000 Technical DataMICROGARD® 2000 is extensively tested in accordance with statutory requirements, including physical performance attributes and barrier to hazardous substances. The following tables outline the results obtained in independent laboratories according to European test methods.<figure class="md-block-image"><img src="https://storage.googleapis.com/eezee-product-images/5MQLYgjv7y5QUnUEU93uxY.png" alt="" /><figcaption class="md-block-image-caption"></figcaption></figure><figure class="md-block-image"><img src="https://storage.googleapis.com/eezee-product-images/YMA~zgW5OO5vOQu0ktX6ng.png" alt="" /><figcaption class="md-block-image-caption"></figcaption></figure><figure class="md-block-image"><img src="https://storage.googleapis.com/eezee-product-images/jQ06be8VxB6S8BxluZ_zJg.png" alt="" /><figcaption class="md-block-image-caption"></figcaption></figure>

<h1>Ansell AlphaTec® 2000-WH STD COVERALL HOOD 111, (PACKING : 40PCS/CSE)</h1>
<h2>Previously known as Microgard 2000 Chemical Protective Coverall</h2>
MICROGARD® 2000 STANDARD provides both protection and comfort with exceptional liquid and particulate protection. Ideal for a wide range of industrial applications.
MICROGARD® 2000 is designed to allow water vapour (perspiration) to escape from the suit yet will withstand saturation of liquid chemicals and filter 100% of particulates down to 0.01 microns in size* 

The use of a high quality two-way stretch microporous film provides an effective liquid and particle barrier combined with a high water vapour transmission rate from inside to outside.
<h3>Features &amp; Benefits</h3>
<ul>
<li>Proven protective barrier to low concentration liquid chemicals, liquid &amp; particulate biological hazards</li>
<li>Comfortable to wear featuring moisture vapor permeable fabric  (“breathable”) to help reduce the risk of heat stress</li>
<li>Optimized body fit, improving wearer comfort and safety</li>
<li>Anti-static, tested according to EN 1149-5</li>
<li>Low linting to help reduce the risk of cross contamination in critical areas</li>
<li>Silicone free, critical in spray painting applications</li>
</ul>
<h3>Applications</h3>
<ul>
<li>Life Sciences</li>
<li>Automotive</li>
<li>Metal fabrication</li>
<li>Food Processing</li>
<li>Defense</li>
</ul>
<h3>Bound Seams</h3>
<ul>
<li>Superior strength, liquid and particle barrier.</li>
</ul>
<h3>MICROGARD® 2000 COMFORT coveralls meet the following European Norms</h3>
<ul>
<li>Type 5 EN ISO 13982-1 Dry particle suit</li>
<li> Type 6 EN13034 Low level spray tight suit</li>
<li>EN14126 Barrier to infective agents</li>
<li>EN1073-2 Barrier to radioactive particulates - Class 2</li>
<li>EN1149-5 Anti-static and</li>
<li>DIN 32781 - Protection agaisnt Pesticides</li>
</ul>
<h3>Specifications</h3>
MICROGARD® 2000 Technical Data
MICROGARD® 2000 is extensively tested in accordance with statutory requirements, including physical performance attributes and barrier to hazardous substances. The following tables outline the results obtained in independent laboratories according to European test methods.

 <div class="img-ctnr">
 <amp-img 
 on="tap:231ch"
 tabindex="0"
 role="button"
 class="contain"
 layout="fill"
 src="https://storage.googleapis.com/eezee-product-images/5MQLYgjv7y5QUnUEU93uxY.png"
 ></amp-img>
 </div>
 
 <amp-image-lightbox 
 id="231ch" 
 layout="nodisplay"></amp-image-lightbox>

 

 <div class="img-ctnr">
 <amp-img 
 on="tap:27lri"
 tabindex="0"
 role="button"
 class="contain"
 layout="fill"
 src="https://storage.googleapis.com/eezee-product-images/YMA~zgW5OO5vOQu0ktX6ng.png"
 ></amp-img>
 </div>
 
 <amp-image-lightbox 
 id="27lri" 
 layout="nodisplay"></amp-image-lightbox>

 

 <div class="img-ctnr">
 <amp-img 
 on="tap:fuamh"
 tabindex="0"
 role="button"
 class="contain"
 layout="fill"
 src="https://storage.googleapis.com/eezee-product-images/jQ06be8VxB6S8BxluZ_zJg.png"
 ></amp-img>
 </div>
 
 <amp-image-lightbox 
 id="fuamh" 
 layout="nodisplay"></amp-image-lightbox>

brian

WORKSAFE

NEW PIG

Bata Industrials

Martor

NEUKING

Workgard

Slice

Body Protection

Cutters

Eileen Soh

Ansell Alphatec 2000-Wh Std Coverall Hood 111 Size Xxxl

ansell alphatec 2000-wh std coverall hood 111 size xxxl ukuran hazmat alphatec® saiz 标准连体衣风帽 尺寸 危险品

ansell-alphatec-2000-wh-std-coverall-hood-111-size-xxxl

Ansell Alphatec 2000-Wh Std Coverall Hood 111 Size M

ansell alphatec 2000-wh std coverall hood 111 size ukuran hazmat alphatec® saiz 标准连体风帽 尺寸 危险品

ansell-alphatec-2000-wh-std-coverall-hood-111-size-m

Ansell Alphatec 2000-Wh Std Coverall Hood 111 Size Xl

ansell alphatec 2000-wh std coverall hood 111 size xl ukuran hazmat alphatec® saiz 标准连体风帽 尺寸 危险品

ansell-alphatec-2000-wh-std-coverall-hood-111-size-xl

Ansell Alphatec 2000-Wh Std Coverall Hood 111 Size L

ansell alphatec 2000-wh std coverall hood 111 size ukuran hazmat alphatec® saiz 标准连体衣风帽 危险品

ansell-alphatec-2000-wh-std-coverall-hood-111-size-l

Ansell Alphatec 2000-Wh Std Coverall Hood 111 Size Xxl

ansell alphatec 2000-wh std coverall hood 111 size xxl ukuran hazmat alphatec® saiz 标准连体风帽 尺寸 危险品

ansell-alphatec-2000-wh-std-coverall-hood-111-size-xxl

Murr 7000-12221-6340500 M12 Female 0° A-cod. With Cable Pur 4x0.34 Bk UL/CSA+drag Ch. 5m 

Suitable for Corrugated Tube (Internal Ø): 10 mm

Degree of Protection (EN IEC 60529): IP65, IP66K, IP67

Additional Condition Protection Degree: Inserted, screwed

Material Screw Connection: Zinc die-casting

Mounting Method: Inserted, screwed, shaking protection

Additional Condition Temperature Range: Depending on cable quality

Strain Relief: Protect connectors from mechanical loads with cable ties.

Bending Radius: Observe permissible bending radii to maintain IP protection class. Excessive bending could compromise protection.

Product Standard: DIN EN 61076-2-101 (M12)

Wire Arrangement: Brown, black, blue, white

Freedom from Ingredients (Jacket): Lead-free, cadmium-free, CFC-free, halogen-free, silicone-free

Tolerance Outer Diameter (Sheath): ± 5 %

Material Wire Insulation: PP (Polypropylene)

Outer Diameter Tolerance Core Insulation: ± 5 %

Shore Hardness Wire Insulation: 70 ± 5 Shore D

Ingredient Freeness Wire Insulation: Lead-free, cadmium-free, CFC-free, halogen-free, silicone-free

Conductor Cross-section (Wire): 0.34 mm²

Material Conductor Wire: Stranded copper wire, bare

Current Load Capacity (Standard): To DIN VDE 0298-4

Electrical Resistance Line Constant Wire: 57 Ω/km @ 20 °C

AC Withstand Voltage (Wire - Wire): 2.5 kV @ 60 s

Power Frequency Withstand Voltage (Wire - Jacket): 2.5 kV @ 60 s

Min. Operating Temperature (Static): -40 °C

Max. Operating Temperature (Fixed): 80 °C / 90 °C @ 10,000 h operation

Operating Temperature Min. (Dynamic): -25 °C

Operating Temperature Max. (Dynamic): 80 °C / 90 °C @ 10,000 h operation

Chemical Resistance: Good, application-related testing

<h3 class="md-block-header-three">Murr 7000-12221-6340500 M12 Female 0° A-cod. With Cable Pur 4x0.34 Bk UL/CSA+drag Ch. 5m </h3><h3 class="md-block-header-three">Cable Details</h3><ul class="md-block-unordered-list-item"><li>Cable Length: 5 m</li></ul><h3 class="md-block-header-three">Side 1 (Connector)</h3><ul class="md-block-unordered-list-item"><li>Tightening Torque: 0.6 Nm</li><li>Mounting Method: Inserted, screwed</li><li>Coating Contact: Gold plated</li><li>Family Construction Form: M12</li><li>Thread: M12 x 1</li><li>Suitable for Corrugated Tube (Internal Ø): 10 mm</li><li>Cable Outlet: Straight</li><li>Coding: A</li><li>Material Contact: Copper alloy</li><li>Material: PUR (Polyurethane)</li><li>No. of Poles: 4</li><li>Width Across Flats: SW13</li><li>Degree of Protection (EN IEC 60529): IP65, IP66K, IP67</li></ul><h3 class="md-block-header-three">Side 2 (Free Cable End)</h3><ul class="md-block-unordered-list-item"><li>Stripping Length (Jacket): 20 mm</li><li>Family Construction Form: Free cable end</li></ul><h3 class="md-block-header-three">Electrical Data | Supply</h3><ul class="md-block-unordered-list-item"><li>Operating Voltage AC Max.: 250 V</li><li>Operating Voltage DC Max.: 250 V</li><li>Operating Voltage AC (UL-Listed): 30 V</li><li>Operating Voltage DC (UL-Listed): 30 V</li><li>Current Operating Per Contact Max.: 4 A</li></ul><h3 class="md-block-header-three">Diagnostics</h3><ul class="md-block-unordered-list-item"><li>Status Indication LED: No</li></ul><h3 class="md-block-header-three">Installation | Connection</h3><ul class="md-block-unordered-list-item"><li>Stripping Length (Jacket): 20 mm</li><li>Mounting Set: M12 x 1</li><li>Gender: Female</li></ul><h3 class="md-block-header-three">Device Protection | Electrical</h3><ul class="md-block-unordered-list-item"><li>Degree of Protection (EN IEC 60529): IP65, IP66K, IP67</li><li>Additional Condition Protection Degree: Inserted, screwed</li><li>Pollution Degree: 3</li><li>Rated Surge Voltage: 2.5 kV</li><li>Material Group (IEC 60664-1): I</li></ul><h3 class="md-block-header-three">Mechanical Data | Material Data</h3><ul class="md-block-unordered-list-item"><li>Coating Locking: Nickeled</li><li>Coating of Fitting: Nickel plated</li><li>Locking Material: Zinc die-casting</li><li>Material Screw Connection: Zinc die-casting</li></ul><h3 class="md-block-header-three">Mechanical Data | Mounting Data</h3><ul class="md-block-unordered-list-item"><li>Mounting Method: Inserted, screwed, shaking protection</li></ul><h3 class="md-block-header-three">Environmental Characteristics | Climatic</h3><ul class="md-block-unordered-list-item"><li>Operating Temperature Min.: -25 °C</li><li>Operating Temperature Max.: 85 °C</li><li>Additional Condition Temperature Range: Depending on cable quality</li></ul><h3 class="md-block-header-three">Important Installation Notes</h3><ul class="md-block-unordered-list-item"><li>Strain Relief: Protect connectors from mechanical loads with cable ties.</li><li>Bending Radius: Observe permissible bending radii to maintain IP protection class. Excessive bending could compromise protection.</li></ul><h3 class="md-block-header-three">Conformity</h3><ul class="md-block-unordered-list-item"><li>Product Standard: DIN EN 61076-2-101 (M12)</li></ul><h3 class="md-block-header-three">Cable Specifications</h3><ul class="md-block-unordered-list-item"><li>Cable Identification: 634</li><li>Cable Type: 3</li><li>Jacket Color: Black</li><li>Type of Certificate: cURus</li></ul><h3 class="md-block-header-three">Cable Structure</h3><ul class="md-block-unordered-list-item"><li>Amount of Stranding: 1</li><li>Stranding: 4 wires twisted</li><li>Wire Arrangement: Brown, black, blue, white</li></ul><h3 class="md-block-header-three">Mechanical Data | Cable</h3><ul class="md-block-unordered-list-item"><li>Cable Weight: 36.3 g/m</li><li>Material Jacket: PUR (Polyurethane)</li><li>Shore Hardness Jacket: 90 ± 5 Shore A</li><li>Freedom from Ingredients (Jacket): Lead-free, cadmium-free, CFC-free, halogen-free, silicone-free</li><li>Outer Diameter (Jacket): 4.5 mm</li><li>Tolerance Outer Diameter (Sheath): ± 5 %</li><li>Material Wire Insulation: PP (Polypropylene)</li><li>Amount Wires: 4</li><li>Outer Diameter Insulation: 1.25 mm</li><li>Outer Diameter Tolerance Core Insulation: ± 5 %</li><li>Shore Hardness Wire Insulation: 70 ± 5 Shore D</li><li>Ingredient Freeness Wire Insulation: Lead-free, cadmium-free, CFC-free, halogen-free, silicone-free</li><li>Amount Strands (Wire): 42</li><li>Diameter of Single Wires: 0.1 mm</li><li>Conductor Cross-section (Wire): 0.34 mm²</li><li>Material Conductor Wire: Stranded copper wire, bare</li><li>Conductor Type (Wire): Strand class 6</li></ul><h3 class="md-block-header-three">Electrical Data | Cable</h3><ul class="md-block-unordered-list-item"><li>Nominal Voltage AC Max.: 300 V</li><li>Current Load Capacity (Standard): To DIN VDE 0298-4</li><li>Current Load Capacity Min. Wire: 4.8 A</li><li>Electrical Resistance Line Constant Wire: 57 Ω/km @ 20 °C</li><li>AC Withstand Voltage (Wire - Wire): 2.5 kV @ 60 s</li><li>Power Frequency Withstand Voltage (Wire - Jacket): 2.5 kV @ 60 s</li></ul><h3 class="md-block-header-three">Temperature Range | Cable</h3><ul class="md-block-unordered-list-item"><li>Min. Operating Temperature (Static): -40 °C</li><li>Max. Operating Temperature (Fixed): 80 °C / 90 °C @ 10,000 h operation</li><li>Operating Temperature Min. (Dynamic): -25 °C</li><li>Operating Temperature Max. (Dynamic): 80 °C / 90 °C @ 10,000 h operation</li></ul><h3 class="md-block-header-three">Resistances | Cable</h3><ul class="md-block-unordered-list-item"><li>UV Resistance: DIN EN ISO 4892-2 A</li><li>Flame Resistance:</li><ul class="md-block-unordered-list-item"><li>UL 1581 § 1090</li><li>IEC 60332-2-2</li><li>UL 1581 § 1100 FT2</li></ul><li>Chemical Resistance: Good, application-related testing</li><li>Gasoline Resistance: Good, application-related testing</li><li>Oil Resistance: Good, application-related testing | DIN EN 60811-404</li></ul><h3 class="md-block-header-three">Installation | Cable</h3><ul class="md-block-unordered-list-item"><li>Bending Radius (Fixed): 5 x Outer diameter</li><li>Bending Radius (Dynamic): 10 x Outer diameter</li><li>No. of Bending Cycles (C-Track): 10 million @ 25 °C</li><li>Traversing Distance (C-Track): 10 m @ 25 °C | Horizontal</li><li>Travel Speed (C-Track): 3 m/s @ 25 °C</li><li>No. of Torsion Cycles: 2 million</li><li>Torsion Stress: ± 180 °/m</li><li>Torsion Speed: 35 cycles/min</li></ul>

<h3>Murr 7000-12221-6340500 M12 Female 0° A-cod. With Cable Pur 4x0.34 Bk UL/CSA+drag Ch. 5m&nbsp;</h3>
<h3>Cable Details</h3>
<ul>
<li>Cable Length: 5 m</li>
</ul>
<h3>Side 1 (Connector)</h3>
<ul>
<li>Tightening Torque: 0.6 Nm</li>
<li>Mounting Method: Inserted, screwed</li>
<li>Coating Contact: Gold plated</li>
<li>Family Construction Form: M12</li>
<li>Thread: M12 x 1</li>
<li>Suitable for Corrugated Tube (Internal Ø): 10 mm</li>
<li>Cable Outlet: Straight</li>
<li>Coding: A</li>
<li>Material Contact: Copper alloy</li>
<li>Material: PUR (Polyurethane)</li>
<li>No. of Poles: 4</li>
<li>Width Across Flats: SW13</li>
<li>Degree of Protection (EN IEC 60529): IP65, IP66K, IP67</li>
</ul>
<h3>Side 2 (Free Cable End)</h3>
<ul>
<li>Stripping Length (Jacket): 20 mm</li>
<li>Family Construction Form: Free cable end</li>
</ul>
<h3>Electrical Data | Supply</h3>
<ul>
<li>Operating Voltage AC Max.: 250 V</li>
<li>Operating Voltage DC Max.: 250 V</li>
<li>Operating Voltage AC (UL-Listed): 30 V</li>
<li>Operating Voltage DC (UL-Listed): 30 V</li>
<li>Current Operating Per Contact Max.: 4 A</li>
</ul>
<h3>Diagnostics</h3>
<ul>
<li>Status Indication LED: No</li>
</ul>
<h3>Installation | Connection</h3>
<ul>
<li>Stripping Length (Jacket): 20 mm</li>
<li>Mounting Set: M12 x 1</li>
<li>Gender: Female</li>
</ul>
<h3>Device Protection | Electrical</h3>
<ul>
<li>Degree of Protection (EN IEC 60529): IP65, IP66K, IP67</li>
<li>Additional Condition Protection Degree: Inserted, screwed</li>
<li>Pollution Degree: 3</li>
<li>Rated Surge Voltage: 2.5 kV</li>
<li>Material Group (IEC 60664-1): I</li>
</ul>
<h3>Mechanical Data | Material Data</h3>
<ul>
<li>Coating Locking: Nickeled</li>
<li>Coating of Fitting: Nickel plated</li>
<li>Locking Material: Zinc die-casting</li>
<li>Material Screw Connection: Zinc die-casting</li>
</ul>
<h3>Mechanical Data | Mounting Data</h3>
<ul>
<li>Mounting Method: Inserted, screwed, shaking protection</li>
</ul>
<h3>Environmental Characteristics | Climatic</h3>
<ul>
<li>Operating Temperature Min.: -25 °C</li>
<li>Operating Temperature Max.: 85 °C</li>
<li>Additional Condition Temperature Range: Depending on cable quality</li>
</ul>
<h3>Important Installation Notes</h3>
<ul>
<li>Strain Relief: Protect connectors from mechanical loads with cable ties.</li>
<li>Bending Radius: Observe permissible bending radii to maintain IP protection class. Excessive bending could compromise protection.</li>
</ul>
<h3>Conformity</h3>
<ul>
<li>Product Standard: DIN EN 61076-2-101 (M12)</li>
</ul>
<h3>Cable Specifications</h3>
<ul>
<li>Cable Identification: 634</li>
<li>Cable Type: 3</li>
<li>Jacket Color: Black</li>
<li>Type of Certificate: cURus</li>
</ul>
<h3>Cable Structure</h3>
<ul>
<li>Amount of Stranding: 1</li>
<li>Stranding: 4 wires twisted</li>
<li>Wire Arrangement: Brown, black, blue, white</li>
</ul>
<h3>Mechanical Data | Cable</h3>
<ul>
<li>Cable Weight: 36.3 g/m</li>
<li>Material Jacket: PUR (Polyurethane)</li>
<li>Shore Hardness Jacket: 90 ± 5 Shore A</li>
<li>Freedom from Ingredients (Jacket): Lead-free, cadmium-free, CFC-free, halogen-free, silicone-free</li>
<li>Outer Diameter (Jacket): 4.5 mm</li>
<li>Tolerance Outer Diameter (Sheath): ± 5 %</li>
<li>Material Wire Insulation: PP (Polypropylene)</li>
<li>Amount Wires: 4</li>
<li>Outer Diameter Insulation: 1.25 mm</li>
<li>Outer Diameter Tolerance Core Insulation: ± 5 %</li>
<li>Shore Hardness Wire Insulation: 70 ± 5 Shore D</li>
<li>Ingredient Freeness Wire Insulation: Lead-free, cadmium-free, CFC-free, halogen-free, silicone-free</li>
<li>Amount Strands (Wire): 42</li>
<li>Diameter of Single Wires: 0.1 mm</li>
<li>Conductor Cross-section (Wire): 0.34 mm²</li>
<li>Material Conductor Wire: Stranded copper wire, bare</li>
<li>Conductor Type (Wire): Strand class 6</li>
</ul>
<h3>Electrical Data | Cable</h3>
<ul>
<li>Nominal Voltage AC Max.: 300 V</li>
<li>Current Load Capacity (Standard): To DIN VDE 0298-4</li>
<li>Current Load Capacity Min. Wire: 4.8 A</li>
<li>Electrical Resistance Line Constant Wire: 57 Ω/km @ 20 °C</li>
<li>AC Withstand Voltage (Wire - Wire): 2.5 kV @ 60 s</li>
<li>Power Frequency Withstand Voltage (Wire - Jacket): 2.5 kV @ 60 s</li>
</ul>
<h3>Temperature Range | Cable</h3>
<ul>
<li>Min. Operating Temperature (Static): -40 °C</li>
<li>Max. Operating Temperature (Fixed): 80 °C / 90 °C @ 10,000 h operation</li>
<li>Operating Temperature Min. (Dynamic): -25 °C</li>
<li>Operating Temperature Max. (Dynamic): 80 °C / 90 °C @ 10,000 h operation</li>
</ul>
<h3>Resistances | Cable</h3>
<ul>
<li>UV Resistance: DIN EN ISO 4892-2 A</li>
<li>Flame Resistance:</li>
<ul>
<li>UL 1581 § 1090</li>
<li>IEC 60332-2-2</li>
<li>UL 1581 § 1100 FT2</li>
</ul>
<li>Chemical Resistance: Good, application-related testing</li>
<li>Gasoline Resistance: Good, application-related testing</li>
<li>Oil Resistance: Good, application-related testing | DIN EN 60811-404</li>
</ul>
<h3>Installation | Cable</h3>
<ul>
<li>Bending Radius (Fixed): 5 x Outer diameter</li>
<li>Bending Radius (Dynamic): 10 x Outer diameter</li>
<li>No. of Bending Cycles (C-Track): 10 million @ 25 °C</li>
<li>Traversing Distance (C-Track): 10 m @ 25 °C | Horizontal</li>
<li>Travel Speed (C-Track): 3 m/s @ 25 °C</li>
<li>No. of Torsion Cycles: 2 million</li>
<li>Torsion Stress: ± 180 °/m</li>
<li>Torsion Speed: 35 cycles/min</li>
</ul>

Murr Asia-Pacific Pte. Ltd

Murr Elektronik 7000-12221-6340500 M12 Female 0° A-cod. With Cable Pur 4x0.34 Bk UL/CSA+drag Ch. 5m

murr elektronik 7000-12221-6340500 m12 female 0° a-cod. cable pur 4x0.34 bk ul/csa+drag ch. 5m dengan kabel ethernet elektronik/穆尔电子 母头 带电缆 以太网电缆 穆尔电子

murr-elektronik-7000-12221-6340500-m12-female-0-a-cod-with-cable-pur-4x0-34-bk-ul-csa-drag-ch-5m

Murr 7000-74301-7960100 RJ45 Male 0° / RJ45 Male 0° Shielded CAT5 (1m)

Product fulfills requirements according to UN/ECE R118

Plastic housings with good resistance against chemicals and oils.

The resistance to aggressive media should be individually tested for your application. Further details on request.

Current operating per contact max.: 1,5 A

Transfer parameters: CAT5e, Class D (ISO/IEC 11801:2002), (EN 50173-1)

Industrial Communication | Ethernet Functionality

Degree of protection (EN IEC 60529): IP20

Additional condition temperature range: depending on cable quality

Note on strain relief: Protect the connectors by suitable measures from mechanical loads, e.g., by using cable ties.

Note on bending radius: Attention: Observe the permissible bending radii when laying cables, as the IP protection class can be endangered by excessive bending forces.

Wire arrangement: white, yellow, blue, orange

Stranding: 4 wires around core filler twisted

Cable shielding (type): copper braid, tinned

Freedom from ingredients (jacket): lead-free, cadmium-free, CFC-free, halogen-free, silicone-free

Tolerance outer diameter (sheath): ± 5 %

Outer diameter tolerance core insulation: ± 5 %

Shore hardness wire insulation: 65 Shore D

Ingredient freeness wire insulation: lead-free, CFC-free, halogen-free

Material conductor wire: Stranded copper wire, bare

Current load capacity (standard): to DIN VDE 0298-4

Characteristic impedance: 100 Ω ± 15 % @ 100 MHz

Electrical resistance line constant wire: 55 Ω/km @ 20 °C

AC withstand voltage (wire - wire): 2 kV @ 60 s

Electrical capacity line constant (wire - wire): 50000 pF/km

Power frequency withstand voltage (wire - jacket): 2 kV @ 60 s

AC withstand voltage (wire - shield): 2 kV @ 60 s

Min. operating temperature (static): -40 °C

Max. operating temperature (fixed): 80 °C

Operating temperature min. (dynamic): -30 °C

Operating temperature max. (dynamic): 70 °C

Flame resistance: IEC 60332-2-2 | UL 1581 § 1090 | UL 1581 § 1100 FT2

Chemical resistance: Good, application-related testing

Gasoline resistance: Good, application-related testing

Oil resistance: DIN EN 60811-404 | Good, application-related testing

Bending radius (fixed): 5 x Outer diameter

Bending radius (dynamic): 12 x Outer diameter

<h3 class="md-block-header-three">Murr 7000-74301-7960100 RJ45 Male 0° / RJ45 Male 0° Shielded CAT5 (1m)</h3>Product fulfills requirements according to UN/ECE R118Ethernet CAT5Male straight – male straightRJ45 – RJ45, 4-poleshieldedFurther cable lengths on request.Plastic housings with good resistance against chemicals and oils.The resistance to aggressive media should be individually tested for your application. Further details on request.<ul class="md-block-unordered-list-item"><li>Cable Length</li><ul class="md-block-unordered-list-item"><li>1 m</li></ul><li>Side 1</li><ul class="md-block-unordered-list-item"><li>Mounting method: inserted</li><li>Family construction form: RJ45</li><li>No. of poles: 4</li></ul><li>Electrical Data | Supply</li><ul class="md-block-unordered-list-item"><li>Operating voltage DC max.: 60 V</li><li>Current operating per contact max.: 1,5 A</li></ul><li>Industrial Communication</li><ul class="md-block-unordered-list-item"><li>Transfer parameters: CAT5e, Class D (ISO/IEC 11801:2002), (EN 50173-1)</li><li>Data transmission rate max.: 100 MBit/s</li></ul><li>Industrial Communication | Ethernet Functionality</li><ul class="md-block-unordered-list-item"><li>Duplex: Full duplex</li></ul><li>Diagnostics</li><ul class="md-block-unordered-list-item"><li>Status indication LED: no</li></ul><li>Device Protection | Electrical</li><ul class="md-block-unordered-list-item"><li>Degree of protection (EN IEC 60529): IP20</li><li>Pollution Degree: 3</li><li>Rated surge voltage: 1 kV</li><li>Material group (IEC 60664-1): I</li></ul><li>Mechanical Data</li><ul class="md-block-unordered-list-item"><li>Contour for corrugated hose: without</li></ul><li>Mechanical Data | Material Data</li><ul class="md-block-unordered-list-item"><li>Material housing: PUR</li><li>Locking material: PA</li></ul><li>Mechanical Data | Mounting Data</li><ul class="md-block-unordered-list-item"><li>Locking techniques: Snap-in connector</li></ul><li>Environmental Characteristics | Climatic</li><ul class="md-block-unordered-list-item"><li>Operating temperature min.: -25 °C</li><li>Operating temperature max.: 85 °C</li><li>Additional condition temperature range: depending on cable quality</li></ul><li>Important Installation Notes</li><ul class="md-block-unordered-list-item"><li>Note on strain relief: Protect the connectors by suitable measures from mechanical loads, e.g., by using cable ties.</li><li>Note on bending radius: Attention: Observe the permissible bending radii when laying cables, as the IP protection class can be endangered by excessive bending forces.</li></ul><li>Cable</li><ul class="md-block-unordered-list-item"><li>Wire arrangement: white, yellow, blue, orange</li></ul><li>General Data | Cable</li><ul class="md-block-unordered-list-item"><li>Cable identification: 796</li><li>Jacket color: green</li><li>Type of certificate: cURus</li></ul><li>Structure | Cable</li><ul class="md-block-unordered-list-item"><li>Amount stranding: 1</li><li>Stranding: 4 wires around core filler twisted</li><li>Cable shielding (type): copper braid, tinned</li><li>Cable shielding (coverage): 85 %</li><li>Banding: Fleece, foil</li><li>Filler: yes</li></ul><li>Mechanical Data | Cable</li><ul class="md-block-unordered-list-item"><li>Cable weight: 69,3 g/m</li><li>Material jacket: PUR</li><li>Shore hardness jacket: 89 Shore A</li><li>Freedom from ingredients (jacket): lead-free, cadmium-free, CFC-free, halogen-free, silicone-free</li><li>Outer diameter (jacket): 6,7 mm</li><li>Tolerance outer diameter (sheath): ± 5 %</li><li>Material inner jacket: FRNC</li><li>Color (inner jacket): natur</li><li>Material wire insulation: PE</li><li>Amount wires: 4</li><li>Outer diameter insulation: 1,4 mm</li><li>Outer diameter tolerance core insulation: ± 5 %</li><li>Shore hardness wire insulation: 65 Shore D</li><li>Ingredient freeness wire insulation: lead-free, CFC-free, halogen-free</li><li>Amount strands (wire): 7</li><li>Diameter of single wires: 22 AWG</li><li>Conductor cross-section (wire): 22 AWG</li><li>Material conductor wire: Stranded copper wire, bare</li></ul><li>Electrical Data | Cable</li><ul class="md-block-unordered-list-item"><li>Nominal voltage AC max.: 300 V</li><li>Current load capacity (standard): to DIN VDE 0298-4</li><li>Current load capacity min. wire: 4,8 A</li><li>Characteristic impedance: 100 Ω ± 15 % @ 100 MHz</li><li>Electrical resistance line constant wire: 55 Ω/km @ 20 °C</li><li>AC withstand voltage (wire - wire): 2 kV @ 60 s</li><li>Electrical capacity line constant (wire - wire): 50000 pF/km</li><li>Power frequency withstand voltage (wire - jacket): 2 kV @ 60 s</li><li>AC withstand voltage (wire - shield): 2 kV @ 60 s</li><li>Isolation resistance: 5000 MΩ × km</li></ul><li>Temperature Range | Cable</li><ul class="md-block-unordered-list-item"><li>Min. operating temperature (static): -40 °C</li><li>Max. operating temperature (fixed): 80 °C</li><li>Operating temperature min. (dynamic): -30 °C</li><li>Operating temperature max. (dynamic): 70 °C</li></ul><li>Resistances | Cable</li><ul class="md-block-unordered-list-item"><li>Flame resistance: IEC 60332-2-2 | UL 1581 § 1090 | UL 1581 § 1100 FT2</li><li>Chemical resistance: Good, application-related testing</li><li>Gasoline resistance: Good, application-related testing</li><li>Oil resistance: DIN EN 60811-404 | Good, application-related testing</li></ul><li>Installation | Cable</li><ul class="md-block-unordered-list-item"><li>Bending radius (fixed): 5 x Outer diameter</li><li>Bending radius (dynamic): 12 x Outer diameter</li><li>No. of bending cycles (C-track): 3 Mio. @ 25 °C</li><li>Traversing distance (C-track): 5 m @ 25 °C</li><li>Travel speed (C-track): 3,3 m/s @ 25 °C</li><li>No. of torsion cycles: 1 Mio. @ 25 °C</li><li>Torsion stress: ± 180 °/m</li></ul></ul>

<h3>Murr 7000-74301-7960100 RJ45 Male 0° / RJ45 Male 0° Shielded CAT5 (1m)</h3>
Product fulfills requirements according to UN/ECE R118
Ethernet CAT5
Male straight – male straight
RJ45 – RJ45, 4-pole
shielded
Further cable lengths on request.
Plastic housings with good resistance against chemicals and oils.
The resistance to aggressive media should be individually tested for your application. Further details on request.
<ul>
<li>Cable Length</li>
<ul>
<li>1 m</li>
</ul>
<li>Side 1</li>
<ul>
<li>Mounting method: inserted</li>
<li>Family construction form: RJ45</li>
<li>No. of poles: 4</li>
</ul>
<li>Electrical Data | Supply</li>
<ul>
<li>Operating voltage DC max.: 60 V</li>
<li>Current operating per contact max.: 1,5 A</li>
</ul>
<li>Industrial Communication</li>
<ul>
<li>Transfer parameters: CAT5e, Class D (ISO/IEC 11801:2002), (EN 50173-1)</li>
<li>Data transmission rate max.: 100 MBit/s</li>
</ul>
<li>Industrial Communication | Ethernet Functionality</li>
<ul>
<li>Duplex: Full duplex</li>
</ul>
<li>Diagnostics</li>
<ul>
<li>Status indication LED: no</li>
</ul>
<li>Device Protection | Electrical</li>
<ul>
<li>Degree of protection (EN IEC 60529): IP20</li>
<li>Pollution Degree: 3</li>
<li>Rated surge voltage: 1 kV</li>
<li>Material group (IEC 60664-1): I</li>
</ul>
<li>Mechanical Data</li>
<ul>
<li>Contour for corrugated hose: without</li>
</ul>
<li>Mechanical Data | Material Data</li>
<ul>
<li>Material housing: PUR</li>
<li>Locking material: PA</li>
</ul>
<li>Mechanical Data | Mounting Data</li>
<ul>
<li>Locking techniques: Snap-in connector</li>
</ul>
<li>Environmental Characteristics | Climatic</li>
<ul>
<li>Operating temperature min.: -25 °C</li>
<li>Operating temperature max.: 85 °C</li>
<li>Additional condition temperature range: depending on cable quality</li>
</ul>
<li>Important Installation Notes</li>
<ul>
<li>Note on strain relief: Protect the connectors by suitable measures from mechanical loads, e.g., by using cable ties.</li>
<li>Note on bending radius: Attention: Observe the permissible bending radii when laying cables, as the IP protection class can be endangered by excessive bending forces.</li>
</ul>
<li>Cable</li>
<ul>
<li>Wire arrangement: white, yellow, blue, orange</li>
</ul>
<li>General Data | Cable</li>
<ul>
<li>Cable identification: 796</li>
<li>Jacket color: green</li>
<li>Type of certificate: cURus</li>
</ul>
<li>Structure | Cable</li>
<ul>
<li>Amount stranding: 1</li>
<li>Stranding: 4 wires around core filler twisted</li>
<li>Cable shielding (type): copper braid, tinned</li>
<li>Cable shielding (coverage): 85 %</li>
<li>Banding: Fleece, foil</li>
<li>Filler: yes</li>
</ul>
<li>Mechanical Data | Cable</li>
<ul>
<li>Cable weight: 69,3 g/m</li>
<li>Material jacket: PUR</li>
<li>Shore hardness jacket: 89 Shore A</li>
<li>Freedom from ingredients (jacket): lead-free, cadmium-free, CFC-free, halogen-free, silicone-free</li>
<li>Outer diameter (jacket): 6,7 mm</li>
<li>Tolerance outer diameter (sheath): ± 5 %</li>
<li>Material inner jacket: FRNC</li>
<li>Color (inner jacket): natur</li>
<li>Material wire insulation: PE</li>
<li>Amount wires: 4</li>
<li>Outer diameter insulation: 1,4 mm</li>
<li>Outer diameter tolerance core insulation: ± 5 %</li>
<li>Shore hardness wire insulation: 65 Shore D</li>
<li>Ingredient freeness wire insulation: lead-free, CFC-free, halogen-free</li>
<li>Amount strands (wire): 7</li>
<li>Diameter of single wires: 22 AWG</li>
<li>Conductor cross-section (wire): 22 AWG</li>
<li>Material conductor wire: Stranded copper wire, bare</li>
</ul>
<li>Electrical Data | Cable</li>
<ul>
<li>Nominal voltage AC max.: 300 V</li>
<li>Current load capacity (standard): to DIN VDE 0298-4</li>
<li>Current load capacity min. wire: 4,8 A</li>
<li>Characteristic impedance: 100 Ω ± 15 % @ 100 MHz</li>
<li>Electrical resistance line constant wire: 55 Ω/km @ 20 °C</li>
<li>AC withstand voltage (wire - wire): 2 kV @ 60 s</li>
<li>Electrical capacity line constant (wire - wire): 50000 pF/km</li>
<li>Power frequency withstand voltage (wire - jacket): 2 kV @ 60 s</li>
<li>AC withstand voltage (wire - shield): 2 kV @ 60 s</li>
<li>Isolation resistance: 5000 MΩ × km</li>
</ul>
<li>Temperature Range | Cable</li>
<ul>
<li>Min. operating temperature (static): -40 °C</li>
<li>Max. operating temperature (fixed): 80 °C</li>
<li>Operating temperature min. (dynamic): -30 °C</li>
<li>Operating temperature max. (dynamic): 70 °C</li>
</ul>
<li>Resistances | Cable</li>
<ul>
<li>Flame resistance: IEC 60332-2-2 | UL 1581 § 1090 | UL 1581 § 1100 FT2</li>
<li>Chemical resistance: Good, application-related testing</li>
<li>Gasoline resistance: Good, application-related testing</li>
<li>Oil resistance: DIN EN 60811-404 | Good, application-related testing</li>
</ul>
<li>Installation | Cable</li>
<ul>
<li>Bending radius (fixed): 5 x Outer diameter</li>
<li>Bending radius (dynamic): 12 x Outer diameter</li>
<li>No. of bending cycles (C-track): 3 Mio. @ 25 °C</li>
<li>Traversing distance (C-track): 5 m @ 25 °C</li>
<li>Travel speed (C-track): 3,3 m/s @ 25 °C</li>
<li>No. of torsion cycles: 1 Mio. @ 25 °C</li>
<li>Torsion stress: ± 180 °/m</li>
</ul>
</ul>

Murr Elektronik 7000-74301-7960100 RJ45 Male 0° / RJ45 Male 0° Shielded CAT5 (1m)

murr elektronik 7000-74301-7960100 rj45 male 0° shielded cat5 (1m) pria terlindung accessories aksesoris berlindung aksesori elektronik/穆尔电子 公头 屏蔽 it配件 穆尔电子

murr-elektronik-7000-74301-7960100-rj45-male-0-rj45-male-0-shielded-cat5-1m

Murr 7000-74301-7960500 RJ45 Male 0° / RJ45 Male 0° Shielded CAT5 (5m)

Plastic housings with good resistance against chemicals and oils. 

Current operating per contact max.: 1.5 A

Note on bending radius: Attention: Observe the permissible bending radii when laying cables, as excessive bending forces could compromise the IP protection class.

Outer diameter tolerance core insulation: ± 5%

Characteristic impedance: 100 Ω ± 15% @ 100 MHz

Electrical capacity line constant (wire - wire): 50,000 pF/km

No. of bending cycles (C-track): 3 Mio. @ 25 °C

<h3 class="md-block-header-three">Murr 7000-74301-7960500 RJ45 Male 0° / RJ45 Male 0° Shielded CAT5 (5m)</h3>Product fulfills requirements according to UN/ECE R118Ethernet CAT5Male straight – male straightRJ45 – RJ45, 4-poleshieldedFurther cable lengths on request.Plastic housings with good resistance against chemicals and oils. Cable Length:<ul class="md-block-unordered-list-item"><li>5 m</li></ul>Side 1<ul class="md-block-unordered-list-item"><li>Mounting method: inserted</li><li>Family construction form: RJ45</li><li>No. of poles: 4</li></ul>Electrical Data | Supply<ul class="md-block-unordered-list-item"><li>Operating voltage DC max.: 60 V</li><li>Current operating per contact max.: 1.5 A</li></ul>Industrial Communication<ul class="md-block-unordered-list-item"><li>Transfer parameters: CAT5e, Class D (ISO/IEC 11801:2002), (EN 50173-1)</li><li>Data transmission rate max.: 100 MBit/s</li></ul>Industrial Communication | Ethernet Functionality<ul class="md-block-unordered-list-item"><li>Duplex: Full duplex</li></ul>Diagnostics<ul class="md-block-unordered-list-item"><li>Status indication LED: no</li></ul>Device Protection | Electrical<ul class="md-block-unordered-list-item"><li>Degree of protection (EN IEC 60529): IP20</li><li>Pollution Degree: 3</li><li>Rated surge voltage: 1 kV</li><li>Material group (IEC 60664-1): I</li></ul>Mechanical Data<ul class="md-block-unordered-list-item"><li>Contour for corrugated hose: without</li></ul>Mechanical Data | Material Data<ul class="md-block-unordered-list-item"><li>Material housing: PUR</li><li>Locking material: PA</li></ul>Mechanical Data | Mounting Data<ul class="md-block-unordered-list-item"><li>Locking techniques: Snap-in connector</li></ul>Environmental Characteristics | Climatic<ul class="md-block-unordered-list-item"><li>Operating temperature min.: -25 °C</li><li>Operating temperature max.: 85 °C</li><li>Additional condition temperature range: depending on cable quality</li></ul>Important Installation Notes<ul class="md-block-unordered-list-item"><li>Note on strain relief: Protect the connectors by suitable measures from mechanical loads, e.g., by using cable ties.</li><li>Note on bending radius: Attention: Observe the permissible bending radii when laying cables, as excessive bending forces could compromise the IP protection class.</li></ul>Cable Data<ul class="md-block-unordered-list-item"><li>Wire arrangement: white, yellow, blue, orange</li></ul>General Data | Cable<ul class="md-block-unordered-list-item"><li>Cable identification: 796</li><li>Jacket color: green</li><li>Type of certificate: cURus</li></ul>Structure | Cable<ul class="md-block-unordered-list-item"><li>Amount stranding: 1</li><li>Stranding: 4 wires around core filler twisted</li><li>Cable shielding (type): copper braid, tinned</li><li>Cable shielding (coverage): 85%</li><li>Banding: Fleece, foil</li><li>Filler: yes</li></ul>Mechanical Data | Cable<ul class="md-block-unordered-list-item"><li>Cable weight: 69.3 g/m</li><li>Material jacket: PUR</li><li>Shore hardness jacket: 89 Shore A</li><li>Freedom from ingredients (jacket): lead-free, cadmium-free, CFC-free, halogen-free, silicone-free</li><li>Outer diameter (jacket): 6.7 mm</li><li>Tolerance outer diameter (sheath): ± 5%</li><li>Material inner jacket: FRNC</li><li>Color (inner jacket): natur</li><li>Material wire insulation: PE</li><li>Amount wires: 4</li><li>Outer diameter insulation: 1.4 mm</li><li>Outer diameter tolerance core insulation: ± 5%</li><li>Shore hardness wire insulation: 65 Shore D</li><li>Ingredient freeness wire insulation: lead-free, CFC-free, halogen-free</li><li>Amount strands (wire): 7</li><li>Diameter of single wires: 22 AWG</li><li>Conductor cross-section (wire): 22 AWG</li><li>Material conductor wire: Stranded copper wire, bare</li></ul>Electrical Data | Cable<ul class="md-block-unordered-list-item"><li>Nominal voltage AC max.: 300 V</li><li>Current load capacity (standard): to DIN VDE 0298-4</li><li>Current load capacity min. wire: 4.8 A</li><li>Characteristic impedance: 100 Ω ± 15% @ 100 MHz</li><li>Electrical resistance line constant wire: 55 Ω/km @ 20 °C</li><li>AC withstand voltage (wire - wire): 2 kV @ 60 s</li><li>Electrical capacity line constant (wire - wire): 50,000 pF/km</li><li>Power frequency withstand voltage (wire - jacket): 2 kV @ 60 s</li><li>AC withstand voltage (wire - shield): 2 kV @ 60 s</li><li>Isolation resistance: 5000 MΩ × km</li></ul>Temperature Range | Cable<ul class="md-block-unordered-list-item"><li>Min. operating temperature (static): -40 °C</li><li>Max. operating temperature (fixed): 80 °C</li><li>Operating temperature min. (dynamic): -30 °C</li><li>Operating temperature max. (dynamic): 70 °C</li></ul>Resistances | Cable<ul class="md-block-unordered-list-item"><li>Flame resistance: IEC 60332-2-2 | UL 1581 § 1090 | UL 1581 § 1100 FT2</li><li>Chemical resistance: Good, application-related testing</li><li>Gasoline resistance: Good, application-related testing</li><li>Oil resistance: DIN EN 60811-404 | Good, application-related testing</li></ul>Installation | Cable<ul class="md-block-unordered-list-item"><li>Bending radius (fixed): 5 x Outer diameter</li><li>Bending radius (dynamic): 12 x Outer diameter</li><li>No. of bending cycles (C-track): 3 Mio. @ 25 °C</li><li>Traversing distance (C-track): 5 m @ 25 °C</li><li>Travel speed (C-track): 3.3 m/s @ 25 °C</li><li>No. of torsion cycles: 1 Mio. @ 25 °C</li><li>Torsion stress: ± 180 °/m</li></ul>

<h3>Murr 7000-74301-7960500 RJ45 Male 0° / RJ45 Male 0° Shielded CAT5 (5m)</h3>
Product fulfills requirements according to UN/ECE R118
Ethernet CAT5
Male straight – male straight
RJ45 – RJ45, 4-pole
shielded
Further cable lengths on request.
Plastic housings with good resistance against chemicals and oils.&nbsp;
Cable Length:
<ul>
<li>5 m</li>
</ul>
Side 1
<ul>
<li>Mounting method: inserted</li>
<li>Family construction form: RJ45</li>
<li>No. of poles: 4</li>
</ul>
Electrical Data | Supply
<ul>
<li>Operating voltage DC max.: 60 V</li>
<li>Current operating per contact max.: 1.5 A</li>
</ul>
Industrial Communication
<ul>
<li>Transfer parameters: CAT5e, Class D (ISO/IEC 11801:2002), (EN 50173-1)</li>
<li>Data transmission rate max.: 100 MBit/s</li>
</ul>
Industrial Communication | Ethernet Functionality
<ul>
<li>Duplex: Full duplex</li>
</ul>
Diagnostics
<ul>
<li>Status indication LED: no</li>
</ul>
Device Protection | Electrical
<ul>
<li>Degree of protection (EN IEC 60529): IP20</li>
<li>Pollution Degree: 3</li>
<li>Rated surge voltage: 1 kV</li>
<li>Material group (IEC 60664-1): I</li>
</ul>
Mechanical Data
<ul>
<li>Contour for corrugated hose: without</li>
</ul>
Mechanical Data | Material Data
<ul>
<li>Material housing: PUR</li>
<li>Locking material: PA</li>
</ul>
Mechanical Data | Mounting Data
<ul>
<li>Locking techniques: Snap-in connector</li>
</ul>
Environmental Characteristics | Climatic
<ul>
<li>Operating temperature min.: -25 °C</li>
<li>Operating temperature max.: 85 °C</li>
<li>Additional condition temperature range: depending on cable quality</li>
</ul>
Important Installation Notes
<ul>
<li>Note on strain relief: Protect the connectors by suitable measures from mechanical loads, e.g., by using cable ties.</li>
<li>Note on bending radius: Attention: Observe the permissible bending radii when laying cables, as excessive bending forces could compromise the IP protection class.</li>
</ul>
Cable Data
<ul>
<li>Wire arrangement: white, yellow, blue, orange</li>
</ul>
General Data | Cable
<ul>
<li>Cable identification: 796</li>
<li>Jacket color: green</li>
<li>Type of certificate: cURus</li>
</ul>
Structure | Cable
<ul>
<li>Amount stranding: 1</li>
<li>Stranding: 4 wires around core filler twisted</li>
<li>Cable shielding (type): copper braid, tinned</li>
<li>Cable shielding (coverage): 85%</li>
<li>Banding: Fleece, foil</li>
<li>Filler: yes</li>
</ul>
Mechanical Data | Cable
<ul>
<li>Cable weight: 69.3 g/m</li>
<li>Material jacket: PUR</li>
<li>Shore hardness jacket: 89 Shore A</li>
<li>Freedom from ingredients (jacket): lead-free, cadmium-free, CFC-free, halogen-free, silicone-free</li>
<li>Outer diameter (jacket): 6.7 mm</li>
<li>Tolerance outer diameter (sheath): ± 5%</li>
<li>Material inner jacket: FRNC</li>
<li>Color (inner jacket): natur</li>
<li>Material wire insulation: PE</li>
<li>Amount wires: 4</li>
<li>Outer diameter insulation: 1.4 mm</li>
<li>Outer diameter tolerance core insulation: ± 5%</li>
<li>Shore hardness wire insulation: 65 Shore D</li>
<li>Ingredient freeness wire insulation: lead-free, CFC-free, halogen-free</li>
<li>Amount strands (wire): 7</li>
<li>Diameter of single wires: 22 AWG</li>
<li>Conductor cross-section (wire): 22 AWG</li>
<li>Material conductor wire: Stranded copper wire, bare</li>
</ul>
Electrical Data | Cable
<ul>
<li>Nominal voltage AC max.: 300 V</li>
<li>Current load capacity (standard): to DIN VDE 0298-4</li>
<li>Current load capacity min. wire: 4.8 A</li>
<li>Characteristic impedance: 100 Ω ± 15% @ 100 MHz</li>
<li>Electrical resistance line constant wire: 55 Ω/km @ 20 °C</li>
<li>AC withstand voltage (wire - wire): 2 kV @ 60 s</li>
<li>Electrical capacity line constant (wire - wire): 50,000 pF/km</li>
<li>Power frequency withstand voltage (wire - jacket): 2 kV @ 60 s</li>
<li>AC withstand voltage (wire - shield): 2 kV @ 60 s</li>
<li>Isolation resistance: 5000 MΩ × km</li>
</ul>
Temperature Range | Cable
<ul>
<li>Min. operating temperature (static): -40 °C</li>
<li>Max. operating temperature (fixed): 80 °C</li>
<li>Operating temperature min. (dynamic): -30 °C</li>
<li>Operating temperature max. (dynamic): 70 °C</li>
</ul>
Resistances | Cable
<ul>
<li>Flame resistance: IEC 60332-2-2 | UL 1581 § 1090 | UL 1581 § 1100 FT2</li>
<li>Chemical resistance: Good, application-related testing</li>
<li>Gasoline resistance: Good, application-related testing</li>
<li>Oil resistance: DIN EN 60811-404 | Good, application-related testing</li>
</ul>
Installation | Cable
<ul>
<li>Bending radius (fixed): 5 x Outer diameter</li>
<li>Bending radius (dynamic): 12 x Outer diameter</li>
<li>No. of bending cycles (C-track): 3 Mio. @ 25 °C</li>
<li>Traversing distance (C-track): 5 m @ 25 °C</li>
<li>Travel speed (C-track): 3.3 m/s @ 25 °C</li>
<li>No. of torsion cycles: 1 Mio. @ 25 °C</li>
<li>Torsion stress: ± 180 °/m</li>
</ul>

Murr Elektronik 7000-74301-7960500 RJ45 Male 0° / RJ45 Male 0° Shielded CAT5 (5m)

murr elektronik 7000-74301-7960500 rj45 male 0° shielded cat5 (5m) pria terlindung accessories aksesoris lelaki aksesori elektronik/穆尔电子 公头 屏蔽 it配件 穆尔电子

murr-elektronik-7000-74301-7960500-rj45-male-0-rj45-male-0-shielded-cat5-5m

Murr 7000-74301-7960200 RJ45 Male 0° / RJ45 Male 0° Shielded CAT5 (2m)

The resistance to aggressive media should be individually tested for your application 

<h3 class="md-block-header-three">Murr 7000-74301-7960200 RJ45 Male 0° / RJ45 Male 0° Shielded CAT5 (2m)</h3>Product fulfills requirements according to UN/ECE R118Ethernet CAT5Male straight – male straightRJ45 – RJ45, 4-poleshieldedFurther cable lengths on request.Plastic housings with good resistance against chemicals and oils.The resistance to aggressive media should be individually tested for your application <ul class="md-block-unordered-list-item"><li>Cable Length</li><ul class="md-block-unordered-list-item"><li>2 m</li></ul><li>Side 1</li><ul class="md-block-unordered-list-item"><li>Mounting method: inserted</li><li>Family construction form: RJ45</li><li>No. of poles: 4</li></ul><li>Electrical Data | Supply</li><ul class="md-block-unordered-list-item"><li>Operating voltage DC max.: 60 V</li><li>Current operating per contact max.: 1,5 A</li></ul><li>Industrial Communication</li><ul class="md-block-unordered-list-item"><li>Transfer parameters: CAT5e, Class D (ISO/IEC 11801:2002), (EN 50173-1)</li><li>Data transmission rate max.: 100 MBit/s</li></ul><li>Industrial Communication | Ethernet Functionality</li><ul class="md-block-unordered-list-item"><li>Duplex: Full duplex</li></ul><li>Diagnostics</li><ul class="md-block-unordered-list-item"><li>Status indication LED: no</li></ul><li>Device Protection | Electrical</li><ul class="md-block-unordered-list-item"><li>Degree of protection (EN IEC 60529): IP20</li><li>Pollution Degree: 3</li><li>Rated surge voltage: 1 kV</li><li>Material group (IEC 60664-1): I</li></ul><li>Mechanical Data</li><ul class="md-block-unordered-list-item"><li>Contour for corrugated hose: without</li></ul><li>Mechanical Data | Material Data</li><ul class="md-block-unordered-list-item"><li>Material housing: PUR</li><li>Locking material: PA</li></ul><li>Mechanical Data | Mounting Data</li><ul class="md-block-unordered-list-item"><li>Locking techniques: Snap-in connector</li></ul><li>Environmental Characteristics | Climatic</li><ul class="md-block-unordered-list-item"><li>Operating temperature min.: -25 °C</li><li>Operating temperature max.: 85 °C</li><li>Additional condition temperature range: depending on cable quality</li></ul><li>Important Installation Notes</li><ul class="md-block-unordered-list-item"><li>Note on strain relief: Protect the connectors by suitable measures from mechanical loads, e.g., by using cable ties.</li><li>Note on bending radius: Attention: Observe the permissible bending radii when laying cables, as the IP protection class can be endangered by excessive bending forces.</li></ul><li>Cable Data</li><ul class="md-block-unordered-list-item"><li>Wire arrangement: white, yellow, blue, orange</li></ul><li>General Data | Cable</li><ul class="md-block-unordered-list-item"><li>Cable identification: 796</li><li>Jacket color: green</li><li>Type of certificate: cURus</li></ul><li>Structure | Cable</li><ul class="md-block-unordered-list-item"><li>Amount stranding: 1</li><li>Stranding: 4 wires around core filler twisted</li><li>Cable shielding (type): copper braid, tinned</li><li>Cable shielding (coverage): 85 %</li><li>Banding: Fleece, foil</li><li>Filler: yes</li></ul><li>Mechanical Data | Cable</li><ul class="md-block-unordered-list-item"><li>Cable weight: 69,3 g/m</li><li>Material jacket: PUR</li><li>Shore hardness jacket: 89 Shore A</li><li>Freedom from ingredients (jacket): lead-free, cadmium-free, CFC-free, halogen-free, silicone-free</li><li>Outer diameter (jacket): 6,7 mm</li><li>Tolerance outer diameter (sheath): ± 5 %</li><li>Material inner jacket: FRNC</li><li>Color (inner jacket): natur</li><li>Material wire insulation: PE</li><li>Amount wires: 4</li><li>Outer diameter insulation: 1,4 mm</li><li>Outer diameter tolerance core insulation: ± 5 %</li><li>Shore hardness wire insulation: 65 Shore D</li><li>Ingredient freeness wire insulation: lead-free, CFC-free, halogen-free</li><li>Amount strands (wire): 7</li><li>Diameter of single wires: 22 AWG</li><li>Conductor cross-section (wire): 22 AWG</li><li>Material conductor wire: Stranded copper wire, bare</li></ul><li>Electrical Data | Cable</li><ul class="md-block-unordered-list-item"><li>Nominal voltage AC max.: 300 V</li><li>Current load capacity (standard): to DIN VDE 0298-4</li><li>Current load capacity min. wire: 4,8 A</li><li>Characteristic impedance: 100 Ω ± 15 % @ 100 MHz</li><li>Electrical resistance line constant wire: 55 Ω/km @ 20 °C</li><li>AC withstand voltage (wire - wire): 2 kV @ 60 s</li><li>Electrical capacity line constant (wire - wire): 50000 pF/km</li><li>Power frequency withstand voltage (wire - jacket): 2 kV @ 60 s</li><li>AC withstand voltage (wire - shield): 2 kV @ 60 s</li><li>Isolation resistance: 5000 MΩ × km</li></ul><li>Temperature Range | Cable</li><ul class="md-block-unordered-list-item"><li>Min. operating temperature (static): -40 °C</li><li>Max. operating temperature (fixed): 80 °C</li><li>Operating temperature min. (dynamic): -30 °C</li><li>Operating temperature max. (dynamic): 70 °C</li></ul><li>Resistances | Cable</li><ul class="md-block-unordered-list-item"><li>Flame resistance: IEC 60332-2-2 | UL 1581 § 1090 | UL 1581 § 1100 FT2</li><li>Chemical resistance: Good, application-related testing</li><li>Gasoline resistance: Good, application-related testing</li><li>Oil resistance: DIN EN 60811-404 | Good, application-related testing</li></ul><li>Installation | Cable</li><ul class="md-block-unordered-list-item"><li>Bending radius (fixed): 5 x Outer diameter</li><li>Bending radius (dynamic): 12 x Outer diameter</li><li>No. of bending cycles (C-track): 3 Mio. @ 25 °C</li><li>Traversing distance (C-track): 5 m @ 25 °C</li><li>Travel speed (C-track): 3,3 m/s @ 25 °C</li><li>No. of torsion cycles: 1 Mio. @ 25 °C</li><li>Torsion stress: ± 180 °/m</li></ul></ul>

<h3>Murr 7000-74301-7960200 RJ45 Male 0° / RJ45 Male 0° Shielded CAT5 (2m)</h3>
Product fulfills requirements according to UN/ECE R118
Ethernet CAT5
Male straight – male straight
RJ45 – RJ45, 4-pole
shielded
Further cable lengths on request.
Plastic housings with good resistance against chemicals and oils.
The resistance to aggressive media should be individually tested for your application&nbsp;
<ul>
<li>Cable Length</li>
<ul>
<li>2 m</li>
</ul>
<li>Side 1</li>
<ul>
<li>Mounting method: inserted</li>
<li>Family construction form: RJ45</li>
<li>No. of poles: 4</li>
</ul>
<li>Electrical Data | Supply</li>
<ul>
<li>Operating voltage DC max.: 60 V</li>
<li>Current operating per contact max.: 1,5 A</li>
</ul>
<li>Industrial Communication</li>
<ul>
<li>Transfer parameters: CAT5e, Class D (ISO/IEC 11801:2002), (EN 50173-1)</li>
<li>Data transmission rate max.: 100 MBit/s</li>
</ul>
<li>Industrial Communication | Ethernet Functionality</li>
<ul>
<li>Duplex: Full duplex</li>
</ul>
<li>Diagnostics</li>
<ul>
<li>Status indication LED: no</li>
</ul>
<li>Device Protection | Electrical</li>
<ul>
<li>Degree of protection (EN IEC 60529): IP20</li>
<li>Pollution Degree: 3</li>
<li>Rated surge voltage: 1 kV</li>
<li>Material group (IEC 60664-1): I</li>
</ul>
<li>Mechanical Data</li>
<ul>
<li>Contour for corrugated hose: without</li>
</ul>
<li>Mechanical Data | Material Data</li>
<ul>
<li>Material housing: PUR</li>
<li>Locking material: PA</li>
</ul>
<li>Mechanical Data | Mounting Data</li>
<ul>
<li>Locking techniques: Snap-in connector</li>
</ul>
<li>Environmental Characteristics | Climatic</li>
<ul>
<li>Operating temperature min.: -25 °C</li>
<li>Operating temperature max.: 85 °C</li>
<li>Additional condition temperature range: depending on cable quality</li>
</ul>
<li>Important Installation Notes</li>
<ul>
<li>Note on strain relief: Protect the connectors by suitable measures from mechanical loads, e.g., by using cable ties.</li>
<li>Note on bending radius: Attention: Observe the permissible bending radii when laying cables, as the IP protection class can be endangered by excessive bending forces.</li>
</ul>
<li>Cable Data</li>
<ul>
<li>Wire arrangement: white, yellow, blue, orange</li>
</ul>
<li>General Data | Cable</li>
<ul>
<li>Cable identification: 796</li>
<li>Jacket color: green</li>
<li>Type of certificate: cURus</li>
</ul>
<li>Structure | Cable</li>
<ul>
<li>Amount stranding: 1</li>
<li>Stranding: 4 wires around core filler twisted</li>
<li>Cable shielding (type): copper braid, tinned</li>
<li>Cable shielding (coverage): 85 %</li>
<li>Banding: Fleece, foil</li>
<li>Filler: yes</li>
</ul>
<li>Mechanical Data | Cable</li>
<ul>
<li>Cable weight: 69,3 g/m</li>
<li>Material jacket: PUR</li>
<li>Shore hardness jacket: 89 Shore A</li>
<li>Freedom from ingredients (jacket): lead-free, cadmium-free, CFC-free, halogen-free, silicone-free</li>
<li>Outer diameter (jacket): 6,7 mm</li>
<li>Tolerance outer diameter (sheath): ± 5 %</li>
<li>Material inner jacket: FRNC</li>
<li>Color (inner jacket): natur</li>
<li>Material wire insulation: PE</li>
<li>Amount wires: 4</li>
<li>Outer diameter insulation: 1,4 mm</li>
<li>Outer diameter tolerance core insulation: ± 5 %</li>
<li>Shore hardness wire insulation: 65 Shore D</li>
<li>Ingredient freeness wire insulation: lead-free, CFC-free, halogen-free</li>
<li>Amount strands (wire): 7</li>
<li>Diameter of single wires: 22 AWG</li>
<li>Conductor cross-section (wire): 22 AWG</li>
<li>Material conductor wire: Stranded copper wire, bare</li>
</ul>
<li>Electrical Data | Cable</li>
<ul>
<li>Nominal voltage AC max.: 300 V</li>
<li>Current load capacity (standard): to DIN VDE 0298-4</li>
<li>Current load capacity min. wire: 4,8 A</li>
<li>Characteristic impedance: 100 Ω ± 15 % @ 100 MHz</li>
<li>Electrical resistance line constant wire: 55 Ω/km @ 20 °C</li>
<li>AC withstand voltage (wire - wire): 2 kV @ 60 s</li>
<li>Electrical capacity line constant (wire - wire): 50000 pF/km</li>
<li>Power frequency withstand voltage (wire - jacket): 2 kV @ 60 s</li>
<li>AC withstand voltage (wire - shield): 2 kV @ 60 s</li>
<li>Isolation resistance: 5000 MΩ × km</li>
</ul>
<li>Temperature Range | Cable</li>
<ul>
<li>Min. operating temperature (static): -40 °C</li>
<li>Max. operating temperature (fixed): 80 °C</li>
<li>Operating temperature min. (dynamic): -30 °C</li>
<li>Operating temperature max. (dynamic): 70 °C</li>
</ul>
<li>Resistances | Cable</li>
<ul>
<li>Flame resistance: IEC 60332-2-2 | UL 1581 § 1090 | UL 1581 § 1100 FT2</li>
<li>Chemical resistance: Good, application-related testing</li>
<li>Gasoline resistance: Good, application-related testing</li>
<li>Oil resistance: DIN EN 60811-404 | Good, application-related testing</li>
</ul>
<li>Installation | Cable</li>
<ul>
<li>Bending radius (fixed): 5 x Outer diameter</li>
<li>Bending radius (dynamic): 12 x Outer diameter</li>
<li>No. of bending cycles (C-track): 3 Mio. @ 25 °C</li>
<li>Traversing distance (C-track): 5 m @ 25 °C</li>
<li>Travel speed (C-track): 3,3 m/s @ 25 °C</li>
<li>No. of torsion cycles: 1 Mio. @ 25 °C</li>
<li>Torsion stress: ± 180 °/m</li>
</ul>
</ul>

Murr Elektronik 7000-74301-7960200 RJ45 Male 0° / RJ45 Male 0° Shielded CAT5 (2m)

murr elektronik 7000-74301-7960200 rj45 male 0° shielded cat5 (2m) pria terlindung accessories aksesoris berlindung aksesori elektronik/穆尔电子 公头 屏蔽 it配件 穆尔电子