ASSURE

Ironclad

Panda Collections

Pureshield

Sumirubber

WORKSAFE

Mechanical Parts

mechanical-parts

O Ring

o-ring

Safety

safety

Safety Gloves

safety-gloves

Sumirubber Un-Line Nitrile Chemical Resist Pebble Grip Glove 33cm

Made from special nitrile (NBR) compound, Summitech nitrile provides excellent protection against abrasions,punctures, cuts and snags and resistance to a broad range of solvents, animal fats and other chemicals.Meets 21 CFR for food contact.

<h3 class="md-block-header-three">Sumirubber Un-Line Nitrile Chemical Resist Pebble Grip Glove 33cm</h3>Made from special nitrile (NBR) compound, Summitech nitrile provides excellent protection against abrasions,punctures, cuts and snags and resistance to a broad range of solvents, animal fats and other chemicals.Meets 21 CFR for food contact.<h3 class="md-block-header-three">Applications:</h3><ul class="md-block-unordered-list-item"><li>Mechanical Work</li><li>Degreasing</li><li>Wood treatment and finishing</li><li>Industrial maintenance</li><li>Handling of greasy and oil parts</li><li>Chemical processing</li><li>Car and motorcycle industries</li><li>Handling of pesticides</li></ul>Standards:<ul class="md-block-unordered-list-item"><li>EN420:2003</li><li>EN388:2003 - 4101X</li><li>EN374:2003</li><li>EN374-1:2003 - AJKLO</li></ul><h3 class="md-block-header-three">Specification:</h3><ul class="md-block-unordered-list-item"><li>Brand: Sumirubber</li><li>Product Type: Chemical Resist Glove</li><li>Non-Slip Grip: Pebble</li><li>Cuff: Straight</li><li>Colour: Green</li><li>Length: 33 cm</li><li>Thickness: 0.38 mm</li><li>No. of Package: 120 Prs/Case</li></ul>

<h3>Sumirubber Un-Line Nitrile Chemical Resist Pebble Grip Glove 33cm</h3>
Made from special nitrile (NBR) compound, Summitech nitrile provides excellent protection against abrasions,punctures, cuts and snags and resistance to a broad range of solvents, animal fats and other chemicals.Meets 21 CFR for food contact.
<h3>Applications:</h3>
<ul>
<li>Mechanical Work</li>
<li>Degreasing</li>
<li>Wood treatment and finishing</li>
<li>Industrial maintenance</li>
<li>Handling of greasy and oil parts</li>
<li>Chemical processing</li>
<li>Car and motorcycle industries</li>
<li>Handling of pesticides</li>
</ul>
Standards:
<ul>
<li>EN420:2003</li>
<li>EN388:2003 - 4101X</li>
<li>EN374:2003</li>
<li>EN374-1:2003 - AJKLO</li>
</ul>
<h3>Specification:</h3>
<ul>
<li>Brand: Sumirubber</li>
<li>Product Type: Chemical Resist Glove</li>
<li>Non-Slip Grip: Pebble</li>
<li>Cuff: Straight</li>
<li>Colour: Green</li>
<li>Length: 33 cm</li>
<li>Thickness: 0.38 mm</li>
<li>No. of Package: 120 Prs/Case</li>
</ul>

brian

NEW PIG

Bata Industrials

MASTER LOCK

Martor

NEUKING

Workgard

Slice

Safety Shoes

Padlocks & Lockout Devices

Respiratory Protection

Hazmat

Protective Suits

Safety Goggles

Body Protection

Cutters

Eileen Soh

buyerIntroduction

Sumirubber Un-line Nitrile Chemical Resist Pebble Grip Glove 33cm Size 10

sumirubber un-line nitrile chemical resist pebble grip glove 33cm size 10 ukuran safety gloves sarung tangan keselamatan saiz sumirubber/苏米橡胶 丁腈化学抗蚀卵石握力手套 33 厘米 尺寸 安全手套 苏米橡胶

sumirubber-un-line-nitrile-chemical-resist-pebble-grip-glove-33cm-size-10

Sumirubber Un-line Nitrile Chemical Resist Pebble Grip Glove 33cm Size 8

sumirubber un-line nitrile chemical resist pebble grip glove 33cm size ukuran safety gloves sarung tangan keselamatan saiz sumirubber/苏米橡胶 丁腈化学抗蚀卵石握力手套 33 厘米 尺寸 安全手套 苏米橡胶

sumirubber-un-line-nitrile-chemical-resist-pebble-grip-glove-33cm-size-8

Sumirubber nitrile 10G Para Aramid Heat resistant Liner,green

10G seamless para aramid liner combining with Nitrile shell, it is an ultimate solution for task that requires chemical, cut and heat resistant simultaneously.

Nitrile formulation for excellent abrasion and resistant to many solvents, grease and oil based chemicals.

Sumirubber creates protective and industrial gloves, backed by technilogical advances in the rubber field, for your safety.

<h2 class="md-block-header-two">Sumirubber nitrile 10G Para Aramid Heat resistant Liner,green</h2><ul class="md-block-unordered-list-item"><li>10G seamless para aramid liner combining with Nitrile shell, it is an ultimate solution for task that requires chemical, cut and heat resistant simultaneously.</li><li>Nitrile formulation for excellent abrasion and resistant to many solvents, grease and oil based chemicals.</li><li>Silicone and DMF Free.</li></ul><h3 class="md-block-header-three">About Summirubber</h3>Sumirubber creates protective and industrial gloves, backed by technilogical advances in the rubber field, for your safety.

<h2>Sumirubber nitrile 10G Para Aramid Heat resistant Liner,green</h2>
<ul>
<li>10G seamless para aramid liner combining with Nitrile shell, it is an ultimate solution for task that requires chemical, cut and heat resistant simultaneously.</li>
<li>Nitrile formulation for excellent abrasion and resistant to many solvents, grease and oil based chemicals.</li>
<li>Silicone and DMF Free.</li>
</ul>
<h3>About Summirubber</h3>
Sumirubber creates protective and industrial gloves, backed by technilogical advances in the rubber field, for your safety.

Sumirubber Nitrile/10G Para Aramid Heat Resistant Liner Chemical Resistant Gloves, Green, Length : 360Mm Size M

sumirubber nitrile/10g para aramid heat resistant liner chemical gloves, green, length 360mm size sarung tangan tahan panas bahan kimia, hijau, panjang ukuran safety gloves keselamatan pelapik haba saiz sumirubber/苏米橡胶 耐热内衬耐化学手套，绿色，长度：360mm 尺寸 安全手套 苏米橡胶

sumirubber-nitrile-10g-para-aramid-heat-resistant-liner-chemical-resistant-gloves-green-length-360mm-size-m

ORING ID 18 x CS 3 Nitrile (NBR) 70 Shore

Nitrile is often referred to Buna (Buna-N) and NBR.

Nitrile elastomer being affordable is a common material widely used in the industry where sealing take place using O-Ring. It is popular in the industry due to it ability to withstand a wide range of temperature ranging from (-30`C to 100`C). 

It has excellent resistance to petroleum application, it is rated good in the Gas impermeability. In addition Nitrile material are one of the best in its compression and abrasion resistance. The only down side of Nitrile have a poor ozone and weather resistance and only moderate resistance to high temperature.

However Nitrile are not a restricting factors in many applications.

Overview on Application Rating for Material Nitrile (NBR) 

Other than the size and material type, there is one final option that you need to take in consideration. And that is the Durometer. Durometer are being classify as an industry standard to measure the elastomer hardness. Durometer is measured and listed in accordance with Shore A scale. Typical standard hardness for the elastomer are 70 shore, 75 shore and 90 shore to choose from depending on the material that you are using. The higher the value of the shore indicates that the material you are using is harder.Durometer is also generally stated and accepted with a “+/- 5” tolerance.

O-Rings and rubber seals are generally used for:

· Applications that require resistance to OIL

· Applications that are required to work in low temperatures (-0°C)

· High performance Fuel systems that requires strictly no leakage

O-rings need to be installed properly for a perfect fit and sealing. It is important that you install the O-ring in a prescribed manner to ensure your application continues to function properly. You will also ensure you increase the life of the application.

The process of installing an O-ring into a male gland is an intricate affair that should be carefully undertaken. Glide it along the shaft so as it reaches the gland. At that point, it should easily snap into place. Simple as it might sound, a number of steps will ensure that the O-ring doesn’t get damaged.

If you want to install an O-ring correctly and within a short time, here are steps to follow:

· Covering and lubricating the threading of the shaft

The threading of the shaft has the potential of tearing the rubber seal. Cover the threads using a masking tape and then lubricate them to allow for easy passage of the O-ring. The aim is to have the O-ring slide through without getting torn.

That’s a tip that will save you the stress of a torn O-ring. In fact, running the O-ring over jagged or sharp objects could get it torn. You may not be able to notice some of these tears. That’s why you should ensure you prevent them from occurring in the first place.

You will have to stretch the O-ring over the shaft. Ensure you do it evenly. Pulling from one side is a no-no. If anything, you should stretch the O-ring as little as possible. You will not just get a tighter grip but added security too.

Instead of rolling the O-ring down the shaft, slide it. If you spiral wind or roll an O-ring, it cannot be properly installed. It will also not function optimally and can even end up being damaged. If you have a lubricant, apply it on the O-ring and you will keep it rolling.

Place the female component in a manner that allows its radius to go around the corner. This should be done when you are finalizing the installation process. Ensure the lead of this component is inside the chamfer. This is how you will be able to guarantee the safety of the O-ring.

For O-rings to perform optimally, they have to be properly installed. It doesn’t just provide secure sealing but also increases the service life of the component together with the application. Don’t compromise on this process.

ORING ID 18 x CS 3 Nitrile (NBR) 70 Shore Nitrile is often referred to Buna (Buna-N) and NBR.Nitrile elastomer being affordable is a common material widely used in the industry where sealing take place using O-Ring. It is popular in the industry due to it ability to withstand a wide range of temperature ranging from (-30&#x60;C to 100&#x60;C). It has excellent resistance to petroleum application, it is rated good in the Gas impermeability. In addition Nitrile material are one of the best in its compression and abrasion resistance. The only down side of Nitrile have a poor ozone and weather resistance and only moderate resistance to high temperature.However Nitrile are not a restricting factors in many applications.Temperature RangeLow : -22&#x60;F / -30&#x60;C High: 212&#x60;F / 100&#x60;COverview on Application Rating for Material Nitrile (NBR) Properties ( Rating )Oils &amp; Grease - GoodTear Strength - GoodFuel Resistance - PoorGas impermeability - GoodCompression - ExcellentAbrasion Resistance - Good Other than the size and material type, there is one final option that you need to take in consideration. And that is the Durometer. Durometer are being classify as an industry standard to measure the elastomer hardness. Durometer is measured and listed in accordance with Shore A scale. Typical standard hardness for the elastomer are 70 shore, 75 shore and 90 shore to choose from depending on the material that you are using. The higher the value of the shore indicates that the material you are using is harder.Durometer is also generally stated and accepted with a “+/- 5” tolerance.Primary UsageO-Rings and rubber seals are generally used for:· Applications that require resistance to OIL· Applications that are required to work in low temperatures (-0°C)· High performance Fuel systems that requires strictly no leakage <ul class="md-block-unordered-list-item"><li>Aircrafts</li><li>Marine Ships</li><li>F1 Cars</li></ul>· General Industrial Use Tips for installation of an O-ringO-rings need to be installed properly for a perfect fit and sealing. It is important that you install the O-ring in a prescribed manner to ensure your application continues to function properly. You will also ensure you increase the life of the application.So how do you install an O-ring?The process of installing an O-ring into a male gland is an intricate affair that should be carefully undertaken. Glide it along the shaft so as it reaches the gland. At that point, it should easily snap into place. Simple as it might sound, a number of steps will ensure that the O-ring doesn’t get damaged.If you want to install an O-ring correctly and within a short time, here are steps to follow:· Covering and lubricating the threading of the shaftThe threading of the shaft has the potential of tearing the rubber seal. Cover the threads using a masking tape and then lubricate them to allow for easy passage of the O-ring. The aim is to have the O-ring slide through without getting torn.· Don’t force it over sharp cornersThat’s a tip that will save you the stress of a torn O-ring. In fact, running the O-ring over jagged or sharp objects could get it torn. You may not be able to notice some of these tears. That’s why you should ensure you prevent them from occurring in the first place.· Even stretchingYou will have to stretch the O-ring over the shaft. Ensure you do it evenly. Pulling from one side is a no-no. If anything, you should stretch the O-ring as little as possible. You will not just get a tighter grip but added security too.· Don’t roll it down the shaftInstead of rolling the O-ring down the shaft, slide it. If you spiral wind or roll an O-ring, it cannot be properly installed. It will also not function optimally and can even end up being damaged. If you have a lubricant, apply it on the O-ring and you will keep it rolling.· Finishing it offPlace the female component in a manner that allows its radius to go around the corner. This should be done when you are finalizing the installation process. Ensure the lead of this component is inside the chamfer. This is how you will be able to guarantee the safety of the O-ring.For O-rings to perform optimally, they have to be properly installed. It doesn’t just provide secure sealing but also increases the service life of the component together with the application. Don’t compromise on this process.Installation Guide<figure class="md-block-image"><img src="https://storage.googleapis.com/eezee-product-images/eC34tytslwBkc71PxlG7tM.png" alt="" /><figcaption class="md-block-image-caption"></figcaption></figure>

ORING ID 18 x CS 3 Nitrile (NBR) 70 Shore
&nbsp;&nbsp;
Nitrile is often referred to Buna (Buna-N) and NBR.
Nitrile elastomer being affordable is a common material widely used in the industry where sealing take place using O-Ring. It is popular in the industry due to it ability to withstand a wide range of temperature ranging from (-30`C to 100`C).&nbsp;
It has excellent resistance to petroleum application, it is rated good in the Gas impermeability. In addition Nitrile material are one of the best in its compression and abrasion resistance. The only down side of Nitrile have a poor ozone and weather resistance and only moderate resistance to high temperature.
However Nitrile are not a restricting factors in many applications.
<ins>Temperature Range</ins>
Low : -22`F / -30`C High: 212`F / 100`C
<ins>Overview on Application Rating for Material Nitrile (NBR) </ins>
Properties ( Rating )
Oils &amp; Grease - Good
Tear Strength - Good
Fuel Resistance - Poor
Gas impermeability - Good
Compression - Excellent
Abrasion Resistance - Good&nbsp;
Other than the size and material type, there is one final option that you need to take in consideration. And that is the Durometer. Durometer are being classify as an industry standard to measure the elastomer hardness. Durometer is measured and listed in accordance with Shore A scale. Typical standard hardness for the elastomer are 70 shore, 75 shore and 90 shore to choose from depending on the material that you are using. The higher the value of the shore indicates that the material you are using is harder.Durometer is also generally stated and accepted with a “+/- 5” tolerance.
<ins>Primary Usage</ins>
O-Rings and rubber seals are generally used for:
· Applications that require resistance to OIL
· Applications that are required to work in low temperatures (-0°C)
· High performance Fuel systems that requires strictly no leakage

<ul>
<li>Aircrafts</li>
<li>Marine Ships</li>
<li>F1 Cars</li>
</ul>
· General Industrial Use&nbsp;
<ins>Tips for installation of an O-ring</ins>
O-rings need to be installed properly for a perfect fit and sealing. It is important that you install the O-ring in a prescribed manner to ensure your application continues to function properly. You will also ensure you increase the life of the application.
<ins>So how do you install an O-ring?</ins>
The process of installing an O-ring into a male gland is an intricate affair that should be carefully undertaken. Glide it along the shaft so as it reaches the gland. At that point, it should easily snap into place. Simple as it might sound, a number of steps will ensure that the O-ring doesn’t get damaged.
If you want to install an O-ring correctly and within a short time, here are steps to follow:
· Covering and lubricating the threading of the shaft
The threading of the shaft has the potential of tearing the rubber seal. Cover the threads using a masking tape and then lubricate them to allow for easy passage of the O-ring. The aim is to have the O-ring slide through without getting torn.
· Don’t force it over sharp corners
That’s a tip that will save you the stress of a torn O-ring. In fact, running the O-ring over jagged or sharp objects could get it torn. You may not be able to notice some of these tears. That’s why you should ensure you prevent them from occurring in the first place.
· Even stretching
You will have to stretch the O-ring over the shaft. Ensure you do it evenly. Pulling from one side is a no-no. If anything, you should stretch the O-ring as little as possible. You will not just get a tighter grip but added security too.
· Don’t roll it down the shaft
Instead of rolling the O-ring down the shaft, slide it. If you spiral wind or roll an O-ring, it cannot be properly installed. It will also not function optimally and can even end up being damaged. If you have a lubricant, apply it on the O-ring and you will keep it rolling.
· Finishing it off
Place the female component in a manner that allows its radius to go around the corner. This should be done when you are finalizing the installation process. Ensure the lead of this component is inside the chamfer. This is how you will be able to guarantee the safety of the O-ring.
For O-rings to perform optimally, they have to be properly installed. It doesn’t just provide secure sealing but also increases the service life of the component together with the application. Don’t compromise on this process.
<ins>Installation Guide</ins>

 <div class="img-ctnr">
 <amp-img 
 on="tap:8ab80"
 tabindex="0"
 role="button"
 class="contain"
 layout="fill"
 src="https://storage.googleapis.com/eezee-product-images/eC34tytslwBkc71PxlG7tM.png"
 ></amp-img>
 </div>
 
 <amp-image-lightbox 
 id="8ab80" 
 layout="nodisplay"></amp-image-lightbox>

John

Others

Optibelt

Gates

SAMTECH

VITON

V Rings

Rubber Seals

Oil Seals

Shaft Couplings

Plumbing Tools & Equipment

Ball Bearings

Hydraulic Seals

Wall Plugs, Anchors, Fixings & Kits

Vee-Belts

oring id 18 cs nitrile (nbr) 70 shore nitril ring o-ring oem gelang oem/oem代工 腈纶 肖氏硬度 o型圈 oem代工

oring-id-18-x-cs-3-nitrile-nbr-70-shore

Suitable for contact with all fatty food stuffs

Super lightweight construction enhances sensitivity, flexibility and yet durable

Comply with European Directives for food contact and 21 CFR (USA)

<h3 class="md-block-header-three">Features:</h3><ul class="md-block-unordered-list-item"><li>Suitable for contact with all fatty food stuffs</li><li>Super lightweight construction enhances sensitivity, flexibility and yet durable</li><li>Unlined, reducing risk of contamination</li><li>Comply with European Directives for food contact and 21 CFR (USA)</li><li>Silicone and DMF Free</li></ul><h3 class="md-block-header-three">Applications:</h3><ul class="md-block-unordered-list-item"><li>Meat and poultry handling</li><li>Fruits and vegetables processing</li><li>Fish processing</li><li>Agrochemical industry</li><li>Janitorial use</li></ul>Standards:<ul class="md-block-unordered-list-item"><li>EN420:2003</li><li>EN388:2003 - 2001X</li><li>EN374:2003</li><li>EN374-1:2003 - JKLOPT</li></ul><h3 class="md-block-header-three">Specification:</h3><ul class="md-block-unordered-list-item"><li>Brand: Sumirubber</li><li>Product Type: Nitrile Unlined Glove</li><li>Coating Material: Nitrile</li><li>Liner Material: Unlined</li><li>Exterior Finishing: Pebble</li><li>Cuff Style: Straight</li><li>Thickness: 0.21 mm</li><li>Length: 30 cm</li><li>Colour: Blue</li></ul>

<h3>Features:</h3>
<ul>
<li>Suitable for contact with all fatty food stuffs</li>
<li>Super lightweight construction enhances sensitivity, flexibility and yet durable</li>
<li>Unlined, reducing risk of contamination</li>
<li>Comply with European Directives for food contact and 21 CFR (USA)</li>
<li>Silicone and DMF Free</li>
</ul>
<h3>Applications:</h3>
<ul>
<li>Meat and poultry handling</li>
<li>Fruits and vegetables processing</li>
<li>Fish processing</li>
<li>Agrochemical industry</li>
<li>Janitorial use</li>
</ul>
Standards:
<ul>
<li>EN420:2003</li>
<li>EN388:2003 - 2001X</li>
<li>EN374:2003</li>
<li>EN374-1:2003 - JKLOPT</li>
</ul>
<h3>Specification:</h3>
<ul>
<li>Brand: Sumirubber</li>
<li>Product Type: Nitrile Unlined Glove</li>
<li>Coating Material: Nitrile</li>
<li>Liner Material: Unlined</li>
<li>Exterior Finishing: Pebble</li>
<li>Cuff Style: Straight</li>
<li>Thickness: 0.21 mm</li>
<li>Length: 30 cm</li>
<li>Colour: Blue</li>
</ul>

Sumirubber Unsupported Nitrile Unlined Chemical Resistant Gloves Size 9

sumirubber unsupported nitrile unlined chemical resistant gloves size sarung tangan tahan bahan kimia nitril tidak bergaris ukuran safety keselamatan saiz sumirubber/苏米橡胶 无支撑丁腈无衬里耐化学手套 安全手套 苏米橡胶

sumirubber-unsupported-nitrile-unlined-chemical-resistant-gloves-size-9

Sumirubber Unsupported Nitrile Unlined Chemical Resistant Gloves Size 7

sumirubber-unsupported-nitrile-unlined-chemical-resistant-gloves-size-7

Sumirubber Unsupported Nitrile Unlined Chemical Resistant Gloves Size 8

sumirubber-unsupported-nitrile-unlined-chemical-resistant-gloves-size-8

Sumirubber Unsupported Nitrile Unlined Chemical Resistant Gloves Size 10

sumirubber unsupported nitrile unlined chemical resistant gloves size 10 sarung tangan tahan bahan kimia nitril tidak bergaris ukuran safety keselamatan saiz sumirubber/苏米橡胶 无支撑丁腈无衬里耐化学手套，尺寸 安全手套 苏米橡胶

sumirubber-unsupported-nitrile-unlined-chemical-resistant-gloves-size-10

Price base on • 100 Pieces/Bag     (10 Bags/Carton)

Ultra Clean Nitrile Glove is developed from 100% Pure Nitrile  material that offers superior tactile, puncture resistant and antistatic  properties. 

Nitrile Gloves are recommended for used in any cleanroom environment for protection against contaminations and static charge.

 Smooth with beaded cuff and textured fingertips. 

 Tacky grip and non-slip performance allowing better hold on components. 

 Non-staining and non-smudging even during prolong donning thereby ease risk of  

contamination to parts or components that are being handled. 

 Generally high permeation resistant properties to a wide variety of solvents, acids and  

 High physical strength and resistant to tear. 

 Textured fingertips with tapered finish for better fit. 

 Without plasticizers, contain no phthalates esters, silicone oil and amide. 

 Laundered with 0.2micron filtered high resistivity DI water. 

 Manufactured and packed in a controlled environment

Ultra Clean Nitrile Gloves are guaranteed to meet 2.5.0 AQL level II sampling plan per MIL-STD- 

150E for the following defects. Graded Nitrile Gloves are guaranteed to meet 2.5.0 AQL level II  

sampling plan per MIL-STD-105E for the following defects. 

Price base on • 100 Pieces/Bag (10 Bags/Carton) Ultra Clean Nitrile Glove is developed from 100% Pure Nitrile material that offers superior tactile, puncture resistant and antistatic properties. Nitrile Gloves are recommended for used in any cleanroom environment for protection against contaminations and static charge.Characteristics Smooth with beaded cuff and textured fingertips.  Tacky grip and non-slip performance allowing better hold on components.  Non-staining and non-smudging even during prolong donning thereby ease risk of contamination to parts or components that are being handled.  Generally high permeation resistant properties to a wide variety of solvents, acids and bases  High physical strength and resistant to tear.  Textured fingertips with tapered finish for better fit.  Without plasticizers, contain no phthalates esters, silicone oil and amide.  Laundered with 0.2micron filtered high resistivity DI water.  Manufactured and packed in a controlled environment Quality AssuranceUltra Clean Nitrile Gloves are guaranteed to meet 2.5.0 AQL level II sampling plan per MIL-STD- 150E for the following defects. Graded Nitrile Gloves are guaranteed to meet 2.5.0 AQL level II sampling plan per MIL-STD-105E for the following defects. 1. Pin holes 2. Tear 3. Stain/Lumps/Dirt/Sticky 5. Physical dimension noncompliance 4. Contamination noncompliance 6. Electrostatic property noncompliance

Price base on • 100 Pieces/Bag (10 Bags/Carton)

Ultra Clean Nitrile Glove is developed from 100% Pure Nitrile material that offers superior tactile, puncture resistant and antistatic properties.&nbsp;
Nitrile Gloves are recommended for used in any cleanroom environment for protection against contaminations and static charge.
Characteristics
 Smooth with beaded cuff and textured fingertips.&nbsp;
 Tacky grip and non-slip performance allowing better hold on components.&nbsp;
 Non-staining and non-smudging even during prolong donning thereby ease risk of&nbsp;&nbsp;
contamination to parts or components that are being handled.&nbsp;
 Generally high permeation resistant properties to a wide variety of solvents, acids and&nbsp;&nbsp;
bases&nbsp;
 High physical strength and resistant to tear.&nbsp;
 Textured fingertips with tapered finish for better fit.&nbsp;
 Without plasticizers, contain no phthalates esters, silicone oil and amide.&nbsp;
 Laundered with 0.2micron filtered high resistivity DI water.&nbsp;
 Manufactured and packed in a controlled environment
&nbsp;&nbsp;

Quality Assurance
Ultra Clean Nitrile Gloves are guaranteed to meet 2.5.0 AQL level II sampling plan per MIL-STD-&nbsp;
150E for the following defects. Graded Nitrile Gloves are guaranteed to meet 2.5.0 AQL level II&nbsp;&nbsp;
sampling plan per MIL-STD-105E for the following defects.&nbsp;
1. Pin holes&nbsp;
2. Tear&nbsp;
3. Stain/Lumps/Dirt/Sticky&nbsp;
5. Physical dimension noncompliance&nbsp;
4. Contamination noncompliance&nbsp;
6. Electrostatic property noncompliance

12" Powder Free Clean Process Nitrile Gloves (4.5g)

12" Powder Free Clean Process Nitrile Gloves (7.0g)

Ultra Clean Nitrile Glove

DAVID

RECO

COCO

WARNOCK

BOEN

BEllA

BONNY

ASTON

LINKEDIN

Office Furniture

Outdoor Furniture

General Furniture

Engine Oil & Fluid

Rapid test kits (COVID)

Other Consumables Products

Rehab, Home Care & Medical Equipment

Storage Boxes & Container 

Packaging & Shipping Supplies

LYU PENGCHONG

12" Powder Free Clean Process Nitrile Gloves

12" powder free clean process nitrile gloves sarung tangan nitril proses bersih bebas bubuk 12". safety keselamatan panda collections serbuk oem/oem代工 12 英寸无粉清洁工艺丁腈手套 安全手套 熊猫收藏

12-powder-free-clean-process-nitrile-gloves

12" Powder Free Clean Process Nitrile Gloves 5.5mil

weight

ASSURE BLUE SOFT NITRILE POWDER-FREE GLOVES
Powder-free nitrile material offers better puncture and abrasion resistance. With 3.5mil thickness, it provides tactile sensitivity and dexterity. Excellent grip in wet and dry conditions. Better than latex and vinyl.

ASSURE BLUE SOFT NITRILE POWDER-FREE GLOVES Powder-free nitrile material offers better puncture and abrasion resistance. With 3.5mil thickness, it provides tactile sensitivity and dexterity. Excellent grip in wet and dry conditions. Better than latex and vinyl.

ASSURE BLUE SOFT NITRILE POWDER-FREE GLOVES 
Powder-free nitrile material offers better puncture and abrasion resistance. With 3.5mil thickness, it provides tactile sensitivity and dexterity. Excellent grip in wet and dry conditions. Better than latex and vinyl.

Nabin Parajuli

DUPONT

ROCHE

Scott

Opto-pharm

Cleaning Wipes

Medical Disposables

Emergency Eyewash and Safety Shower Station

Hooks & Eyes

Face Protection

Disinfectants and Sanitisers

Assure Blue Soft Nitrile POWDER-FREE Gloves

assure blue soft nitrile powder-free gloves safety sarung tangan keselamatan bebas bedak nitril lembut biru assure/保证 柔软丁腈无粉手套 安全手套 保证

assure-blue-soft-nitrile-powder-free-gloves

Small

Medium

Large

Size

100pcs Disposable Nitrile Gloves, Powder-Free

- Very high resistance to puncture and tear

- Single Chlorinated, Ambidextrous and Finger Textured

- Packing Size : 100 Pieces/Box, 10 boxes/Carton  

<h3 class="md-block-header-three">100pcs Disposable Nitrile Gloves, Powder-Free</h3> Features: - High Quality- High Level of touch sensitivity- Tight and form-fitting- Very high resistance to puncture and tear- Standard Cuff and Low Dermatitis- Single Chlorinated, Ambidextrous and Finger Textured- Thickness ~ 4mil- Non-Sterile- Color: Blue Color- Packing Size : 100 Pieces/Box, 10 boxes/Carton - Brand: Pureshield

<h3>100pcs Disposable Nitrile Gloves, Powder-Free</h3>
&nbsp;Features: 
 
- High Quality
- High Level of touch sensitivity
- Tight and form-fitting
- Very high resistance to puncture and tear
- Standard Cuff and Low Dermatitis
- Single Chlorinated, Ambidextrous and Finger Textured
- Thickness ~ 4mil
- Non-Sterile
- Color: Blue Color
- Packing Size : 100 Pieces/Box, 10 boxes/Carton&nbsp;&nbsp;
- Brand: Pureshield

Trade21

Microscope Cover Glasses

Filter pipet tips

Microscope Slides

Yin Ying

100pcs disposable nitrile gloves, powder-free 100 pcs sarung tangan nitril sekali pakai, bebas bubuk safety gloves keselamatan pureshield serbuk 件一次性丁腈手套，无粉 安全手套 纯盾

100pcs-disposable-nitrile-gloves-powder-free

Single Box

One Carton of 10 boxes

Packaging

WORKSAFE NITRILE OIL-PROOF MICROFOAM CUT LEVEL E NYLON LINER GLOVES

Cut Level E + Double Nitrile Coated Oil Proof Grippy Gloves

Nitrile coating gloves that offer oil proof and grippy protection

For use during work that involves handling oily objects

Certified with EN388:2016 (4, 4, 4, 3, E) and EN420:2016+A1:2018

<h3 class="md-block-header-three">WORKSAFE NITRILE OIL-PROOF MICROFOAM CUT LEVEL E NYLON LINER GLOVES</h3>Cut Level E + Double Nitrile Coated Oil Proof Grippy Gloves<ul class="md-block-unordered-list-item"><li>High abrasion resistance</li><li>Nitrile coating gloves that offer oil proof and grippy protection</li><li>For use during work that involves handling oily objects</li><li>Certified with EN388:2016 (4, 4, 4, 3, E) and EN420:2016+A1:2018</li></ul><figure class="md-block-image"><img src="https://storage.googleapis.com/eezee-product-images/pZrMR81b4Lnh83zuLJq1dX.png" alt="" /><figcaption class="md-block-image-caption"></figcaption></figure><figure class="md-block-image"><img src="https://storage.googleapis.com/eezee-product-images/xVXBC01AwzaXqYisvEXxqP.png" alt="" /><figcaption class="md-block-image-caption"></figcaption></figure>

<h3>WORKSAFE NITRILE OIL-PROOF MICROFOAM CUT LEVEL E NYLON LINER GLOVES</h3>
Cut Level E + Double Nitrile Coated Oil Proof Grippy Gloves
<ul>
<li>High abrasion resistance</li>
<li>Nitrile coating gloves that offer oil proof and grippy protection</li>
<li>For use during work that involves handling oily objects</li>
<li>Certified with EN388:2016 (4, 4, 4, 3, E) and EN420:2016+A1:2018</li>
</ul>

 <div class="img-ctnr">
 <amp-img 
 on="tap:9gtb7"
 tabindex="0"
 role="button"
 class="contain"
 layout="fill"
 src="https://storage.googleapis.com/eezee-product-images/pZrMR81b4Lnh83zuLJq1dX.png"
 ></amp-img>
 </div>
 
 <amp-image-lightbox 
 id="9gtb7" 
 layout="nodisplay"></amp-image-lightbox>

 

 <div class="img-ctnr">
 <amp-img 
 on="tap:a7mqd"
 tabindex="0"
 role="button"
 class="contain"
 layout="fill"
 src="https://storage.googleapis.com/eezee-product-images/xVXBC01AwzaXqYisvEXxqP.png"
 ></amp-img>
 </div>
 
 <amp-image-lightbox 
 id="a7mqd" 
 layout="nodisplay"></amp-image-lightbox>

Worksafe Nitrile OIL-PROOF Microfoam Cut Level E Nylon Liner Gloves Size 10

worksafe nitrile oil-proof microfoam cut level nylon liner gloves size 10 sarung tangan nitril tahan minyak yang aman untuk kerja ukuran safety keselamatan paras pelapik nilon saiz worksafe/工作安全 丁腈防油微泡沫切割 级尼龙衬里手套 尺寸 安全手套 工作安全

worksafe-nitrile-oil-proof-microfoam-cut-level-e-nylon-liner-gloves-size-10

IRONCLAD Command Knit Foam Nitrile Safety Gloves

Recommended for logistics and delivery works, suitable for logistics worker and delivery personnel.

Ironclad command knit foam is of cut level A. Gloves are designed to protect against light scratches only. (Does not offer protection from direct blade cuts)

<h2 class="md-block-header-two">IRONCLAD Command Knit Foam Nitrile Safety Gloves</h2><h3 class="md-block-header-three">Application</h3>Recommended for logistics and delivery works, suitable for logistics worker and delivery personnel.<h3 class="md-block-header-three">Cut Resistance</h3><ul class="md-block-unordered-list-item"><li>Ironclad command knit foam is of cut level A. Gloves are designed to protect against light scratches only. (Does not offer protection from direct blade cuts)</li></ul><h3 class="md-block-header-three">Features</h3><ul class="md-block-unordered-list-item"><li>Foam nitrile palm coating </li><li>Infused touchscreen allows palm and fingers to be conductive for handling smart devices</li><li>Nitrile reinforced saddle</li></ul>SpecificationsEN 388:2016 4121XANSI 105 ABR 3<h5 class="md-block-header-five"></h5>

<h2>IRONCLAD Command Knit Foam Nitrile Safety Gloves</h2>
<h3>Application</h3>
Recommended for logistics and delivery works, suitable for logistics worker and delivery personnel.
<h3>Cut Resistance</h3>
<ul>
<li>Ironclad command knit foam is of cut level A. Gloves are designed to protect against light scratches only. (Does not offer protection from direct blade cuts)</li>
</ul>
<h3>Features</h3>
<ul>
<li>Foam nitrile palm coating </li>
<li>Infused touchscreen allows palm and fingers to be conductive for handling smart devices</li>
<li>Nitrile reinforced saddle</li>
</ul>
Specifications
EN 388:2016 4121X
ANSI 105 ABR 3
<h5></h5>