ALCHEM

Araldite

Asia Paint

DEVCON

KLENCO

RUST-OLEUM

SEALXPERT

Adhesive

adhesive

Adhesive Glue

adhesive-glue

Maintenance & Care

maintenance-care

Anti Slip Coatings

anti-slip-coatings

Office & School Consumables

office-school-consumables

Art & School Supplies

art-school-supplies

Epoxy

epoxy

Painting Materials

painting-materials

Paints

paints

Polishing Liquids

polishing-liquids

Water Proof Coatings

water-proof-coatings

FRP storage tanks, pipes, vessels, ducts, and on-site maintenance projects, particularly in chemical processing, pulp and paper operations, including chlorine dioxide bleaching towers.

#DHES #hardwarestore #hardware #hardwareshop #diyproject #homerenovation #interiordesign #homedecors #hellosingapore #renotalk #hardwarezone #supportlocalsg #supportlocalbusiness #SealXpert #ACC10 #AntiCorrosiveEpoxyCoating #TwoComponentEpoxyCoating

Features:<ul class="md-block-unordered-list-item"><li>Two-component</li><li>High adhesion strength</li><li>Excellent alkali and acid resistance</li></ul>Applications:<ul class="md-block-unordered-list-item"><li>FRP storage tanks, pipes, vessels, ducts, and on-site maintenance projects, particularly in chemical processing, pulp and paper operations, including chlorine dioxide bleaching towers.</li></ul>Package:<ul class="md-block-unordered-list-item"><li>10.0 litres per set</li></ul>#DHES #hardwarestore #hardware #hardwareshop #diyproject #homerenovation #interiordesign #homedecors #hellosingapore #renotalk #hardwarezone #supportlocalsg #supportlocalbusiness #SealXpert #ACC10 #AntiCorrosiveEpoxyCoating #TwoComponentEpoxyCoating

&nbsp;Features:
<ul>
<li>Two-component</li>
<li>High adhesion strength</li>
<li>Excellent alkali and acid resistance</li>
</ul>
Applications:
<ul>
<li>FRP storage tanks, pipes, vessels, ducts, and on-site maintenance projects, particularly in chemical processing, pulp and paper operations, including chlorine dioxide bleaching towers.</li>
</ul>
Package:
<ul>
<li>10.0 litres per set</li>
</ul>
#DHES #hardwarestore #hardware #hardwareshop #diyproject #homerenovation #interiordesign #homedecors #hellosingapore #renotalk #hardwarezone #supportlocalsg #supportlocalbusiness #SealXpert #ACC10 #AntiCorrosiveEpoxyCoating #TwoComponentEpoxyCoating

Others

BRADY

Cable Ties

Wire Brushes

Cable Carriers

Clearing Drainage Chokes

Painting Tools

Wall Plugs, Anchors, Fixings & Kits

Stationery Tapes

Scrapers

Lubricants

Keith Pey

buyerIntroduction

Sealxpert Anti-Corrosive High Adhesion Two-Component Epoxy Coating ACC10

sealxpert anti-corrosive high adhesion two-component epoxy coating acc10 lapisan epoksi dua komponen adhesi tinggi anti korosif anti-kakisan lekatan salutan sealxpert/密封件 防腐高附着力双组分环氧涂料 环氧胶 密封件

sealxpert-anti-corrosive-high-adhesion-two-component-epoxy-coating-acc10

Two-component epoxy floor and deck coating

Resists gasoline, oil, acids, alkalis and aliphatic solvents

Finish for concrete and steel ramps, walkways, locker rooms, loading docks, marine applications, machine rooms assembly areas and stairs

#DHES #hardwarestore #hardware #hardwareshop #diyproject #homerenovation #interiordesign #homedecors #hellosingapore #renotalk #hardwarezone #supportlocalsg #supportlocalbusiness #SealXpert #EFC38 #EpoxyFloorCoating #TwoComponentEpoxyCoating

Features: <ul class="md-block-unordered-list-item"><li>Two-component epoxy floor and deck coating</li><li>Easy and fast to apply</li><li>Fire retardant in the cured state</li><li>Resists gasoline, oil, acids, alkalis and aliphatic solvents</li></ul>Applications: <ul class="md-block-unordered-list-item"><li>Finish for concrete and steel ramps, walkways, locker rooms, loading docks, marine applications, machine rooms assembly areas and stairs</li></ul>Package:<ul class="md-block-unordered-list-item"><li>3.8 litres per set</li></ul>#DHES #hardwarestore #hardware #hardwareshop #diyproject #homerenovation #interiordesign #homedecors #hellosingapore #renotalk #hardwarezone #supportlocalsg #supportlocalbusiness #SealXpert #EFC38 #EpoxyFloorCoating #TwoComponentEpoxyCoating

&nbsp;Features:&nbsp;
<ul>
<li>Two-component epoxy floor and deck coating</li>
<li>Easy and fast to apply</li>
<li>Fire retardant in the cured state</li>
<li>Resists gasoline, oil, acids, alkalis and aliphatic solvents</li>
</ul>
Applications:&nbsp;
<ul>
<li>Finish for concrete and steel ramps, walkways, locker rooms, loading docks, marine applications, machine rooms assembly areas and stairs</li>
</ul>
Package:
<ul>
<li>3.8 litres per set</li>
</ul>
#DHES #hardwarestore #hardware #hardwareshop #diyproject #homerenovation #interiordesign #homedecors #hellosingapore #renotalk #hardwarezone #supportlocalsg #supportlocalbusiness #SealXpert #EFC38 #EpoxyFloorCoating #TwoComponentEpoxyCoating

Sealxpert Two-Component Epoxy Floor Coating EFC38

sealxpert two-component epoxy floor coating efc38 pelapis lantai epoksi dua komponen salutan sealxpert/密封件 双组分环氧地坪涂料 环氧胶 密封件

sealxpert-two-component-epoxy-floor-coating-efc38

Provides excellent protection against corrosion of metals. erosion and deterioration of concrete or wood

Designed to be applied in underwater and splash zone environments

Repair boat hulls, buoys, seawalls, docks and bridge abutments

#DHES #hardwarestore #hardware #hardwareshop #diyproject #homerenovation #interiordesign #homedecors #hellosingapore #renotalk #hardwarezone #supportlocalsg #supportlocalbusiness #SealXpert #ACU10 #UnderwaterEpoxyCoating #TwoComponentEpoxyCoating

Features:<ul class="md-block-unordered-list-item"><li>Two-component epoxy repair compound</li><li>Provides a rock-hard protective surface</li><li>Provides excellent protection against corrosion of metals. erosion and deterioration of concrete or wood</li></ul>Applications:<ul class="md-block-unordered-list-item"><li>Designed to be applied in underwater and splash zone environments</li><li>Repair boat hulls, buoys, seawalls, docks and bridge abutments</li></ul>Package:<ul class="md-block-unordered-list-item"><li>10.0 litres per set</li></ul>#DHES #hardwarestore #hardware #hardwareshop #diyproject #homerenovation #interiordesign #homedecors #hellosingapore #renotalk #hardwarezone #supportlocalsg #supportlocalbusiness #SealXpert #ACU10 #UnderwaterEpoxyCoating #TwoComponentEpoxyCoating

Features:
<ul>
<li>Two-component epoxy repair compound</li>
<li>Provides a rock-hard protective surface</li>
<li>Provides excellent protection against corrosion of metals. erosion and deterioration of concrete or wood</li>
</ul>
Applications:
<ul>
<li>Designed to be applied in underwater and splash zone environments</li>
<li>Repair boat hulls, buoys, seawalls, docks and bridge abutments</li>
</ul>
Package:
<ul>
<li>10.0 litres per set</li>
</ul>
#DHES #hardwarestore #hardware #hardwareshop #diyproject #homerenovation #interiordesign #homedecors #hellosingapore #renotalk #hardwarezone #supportlocalsg #supportlocalbusiness #SealXpert #ACU10 #UnderwaterEpoxyCoating #TwoComponentEpoxyCoating

Sealxpert Underwater Two-Component Repair Epoxy Coating ACU10

sealxpert underwater two-component repair epoxy coating acu10 perbaikan dua komponen bawah air lapisan epoksi pembaikan salutan sealxpert/密封件 水下二组分修复环氧涂层 环氧胶 密封件

sealxpert-underwater-two-component-repair-epoxy-coating-acu10

Two-component Epoxy Resin Coating designed for application in areas of heavy pedestrian traffic or light rolling traffic under typical dry service temperatures of -29°C to 60°C (-20°F to 140°F)

Easy and fast to apply by paint brush or roller

Reduces accidents (slips and falls) in the workplace

Typical applications include a non-slip finish for concrete and steel ramps, walkways, locker rooms, loading docks, marine applications, machine rooms assembly areas and stairs

#DHES #hardwarestore #hardware #hardwareshop #diyproject #homerenovation #interiordesign #homedecors #hellosingapore #renotalk #hardwarezone #supportlocalsg #supportlocalbusiness #SealXpert #NS38 #AntiSlipFloorCoating #EpoxyCoating

Features:<ul class="md-block-unordered-list-item"><li>Two-component Epoxy Resin Coating designed for application in areas of heavy pedestrian traffic or light rolling traffic under typical dry service temperatures of -29°C to 60°C (-20°F to 140°F)</li><li>Easy and fast to apply by paint brush or roller</li><li>Reduces accidents (slips and falls) in the workplace</li><li>Fire retardant in the cured state</li><li>Resists gasoline, oil, acids, alkalis and aliphatic solvents</li><li>Available in yellow, grey or green</li></ul>Applications: <ul class="md-block-unordered-list-item"><li>Typical applications include a non-slip finish for concrete and steel ramps, walkways, locker rooms, loading docks, marine applications, machine rooms assembly areas and stairs</li></ul>Package:<ul class="md-block-unordered-list-item"><li>3.8 litres per set</li></ul>#DHES #hardwarestore #hardware #hardwareshop #diyproject #homerenovation #interiordesign #homedecors #hellosingapore #renotalk #hardwarezone #supportlocalsg #supportlocalbusiness #SealXpert #NS38 #AntiSlipFloorCoating #EpoxyCoating

&nbsp;Features:
<ul>
<li>Two-component Epoxy Resin Coating designed for application in areas of heavy pedestrian traffic or light rolling traffic under typical dry service temperatures of -29°C to 60°C (-20°F to 140°F)</li>
<li>Easy and fast to apply by paint brush or roller</li>
<li>Reduces accidents (slips and falls) in the workplace</li>
<li>Fire retardant in the cured state</li>
<li>Resists gasoline, oil, acids, alkalis and aliphatic solvents</li>
<li>Available in yellow, grey or green</li>
</ul>
Applications:&nbsp;
<ul>
<li>Typical applications include a non-slip finish for concrete and steel ramps, walkways, locker rooms, loading docks, marine applications, machine rooms assembly areas and stairs</li>
</ul>
Package:
<ul>
<li>3.8 litres per set</li>
</ul>
#DHES #hardwarestore #hardware #hardwareshop #diyproject #homerenovation #interiordesign #homedecors #hellosingapore #renotalk #hardwarezone #supportlocalsg #supportlocalbusiness #SealXpert #NS38 #AntiSlipFloorCoating #EpoxyCoating

Sealxpert NS38 Anti-Slip Floor Two-Component Epoxy Resin Coating

sealxpert ns38 anti-slip floor two-component epoxy resin coating lapisan epoksi dua komponen lantai anti selip salutan sealxpert/密封件 防滑地板二组分环氧树脂涂料 环氧胶 密封件

sealxpert-ns38-anti-slip-floor-two-component-epoxy-resin-coating

Yellow

Grey

Green

Epoxy Resin Color

100% solids epoxy novalac system designed to protect surfaces from severe acid and chemical attack.

Ideal for use around chemical storage tanks, dike walls, and containment areas

Durable, attractive, easy-to-clean surface

Resistant to sulfuric acid in concentrations up to 98%

DEVCON EPOXY COAT™ 7000 AR 12750INDENT ETA 3-4 MONTHS Description100% solids epoxy novalac system designed to protect surfaces from severe acid and chemical attack.Key Features<ul class="md-block-unordered-list-item"><li>Excellent adhesion to concrete surfaces</li><li>Ideal for use around chemical storage tanks, dike walls, and containment areas</li><li>Durable, attractive, easy-to-clean surface</li><li>Resistant to sulfuric acid in concentrations up to 98%</li><li>Open Time: 36 minutes</li><li>Unit Size: 2 gallon</li><li>Cure Time: 24 hours</li></ul>

DEVCON EPOXY COAT™ 7000 AR 12750
INDENT ETA 3-4 MONTHS 
Description
100% solids epoxy novalac system designed to protect surfaces from severe acid and chemical attack.
Key Features
<ul>
<li>Excellent adhesion to concrete surfaces</li>
<li>Ideal for use around chemical storage tanks, dike walls, and containment areas</li>
<li>Durable, attractive, easy-to-clean surface</li>
<li>Resistant to sulfuric acid in concentrations up to 98%</li>
<li>Open Time: 36 minutes</li>
<li>Unit Size: 2 gallon</li>
<li>Cure Time: 24 hours</li>
</ul>

Ian Ong

Devcon 12750 Epoxy Coat 7000 Ar Grey 2 Gal

devcon 12750 epoxy coat 7000 ar grey gal water proof coatings pelapis tahan air lapisan kalis 12750环氧大衣7000 ar灰色2 防水涂料 德维康

devcon-12750-epoxy-coat-7000-ar-grey-2-gal

SealXpert Anti-Corrosive Epoxy Coating is a Bisphenol A resin that has high adhesion strength, high strength and excellent alkali and acid resistance.

SealXpert Anti-Corrosive Epoxy Coating consists of two components, Resin and Activator, each separately packed. Resin container is slack filled to permit addition of activator for mixing in the resin container.

Heat deflection temperature -65°C to 160°C (-85°F to 320°F).

Provides excellent corrosion-resistant protection to organic solvents such as methanol, chlorobenzene, and methyl ethyl ketone to provide long-lasting, reliable equipment for corrosive materials.

Strength properties allowing flexibility in design and application while still meeting safety requirements.

The higher elongation provides FRP equipment with increased toughness and a safety factor for impact damage during process upsets or during shipping and installation.

SealXpert Anti-Corrosive Epoxy Coating is a Bisphenol A resin that has high adhesion strength, high strength and excellent alkali and acid resistance.SealXpert Anti-Corrosive Epoxy Coating consists of two components, Resin and Activator, each separately packed. Resin container is slack filled to permit addition of activator for mixing in the resin container.<h3 class="md-block-header-three">Benefits:</h3><ul class="md-block-unordered-list-item"><li>Heat deflection temperature -65°C to 160°C (-85°F to 320°F).</li><li>Provides excellent corrosion-resistant protection to organic solvents such as methanol, chlorobenzene, and methyl ethyl ketone to provide long-lasting, reliable equipment for corrosive materials.</li><li>Strength properties allowing flexibility in design and application while still meeting safety requirements.</li><li>The higher elongation provides FRP equipment with increased toughness and a safety factor for impact damage during process upsets or during shipping and installation.</li></ul>

SealXpert Anti-Corrosive Epoxy Coating is a Bisphenol A resin that has high adhesion strength, high strength and excellent alkali and acid resistance.
SealXpert Anti-Corrosive Epoxy Coating consists of two components, Resin and Activator, each separately packed. Resin container is slack filled to permit addition of activator for mixing in the resin container.
<h3>Benefits:</h3>
<ul>
<li>Heat deflection temperature -65°C to 160°C (-85°F to 320°F).</li>
<li>Provides excellent corrosion-resistant protection to organic solvents such as methanol, chlorobenzene, and methyl ethyl ketone to provide long-lasting, reliable equipment for corrosive materials.</li>
<li>Strength properties allowing flexibility in design and application while still meeting safety requirements.</li>
<li>The higher elongation provides FRP equipment with increased toughness and a safety factor for impact damage during process upsets or during shipping and installation.</li>
</ul>

BRIGHTMAX

WRAP SEAL

KOLOR KUT

Putty

Clamps

Threadlocker

Leak Repair

Sealants

Hand Cleaners

Grease

Retaining Compound

Sealxpert Anti-Corrosive Epoxy Coating (ACC10) (10 Litres)

sealxpert anti-corrosive epoxy coating (acc10) (10 litres) lapisan epoksi anti korosif liter) salutan anti-hakis sealxpert/密封件 防腐环氧树脂涂层 (acc10)（10 升） 环氧胶 密封件

sealxpert-anti-corrosive-epoxy-coating-acc10-10-litres

Ppg 435 Sigmacover Epoxy Mio Coat (up to Dry Temp 200degC) ( Light Grey) Pack Size 20 Litres

PPG SigmaCover 435 is best suited for use on exterior surfaces such as brick and steel in domestic, commercial and industrial surroundings which are exposed to harsh and extreme weather conditions.

This product cures at temperatures as low as -10°C and is resistant to temperatures as high as 200°C.

PPG SigmaCover 435 can be applied using a brush, roller or airless spray and leaves a touch dry finish in around 2-4 hours. Each litre of this products covers an area of roughly 6.3m2

PPG SigmaCover 435 is designed for exterior surfaces such as brick and steel which are exposed to harsh weather conditions.

Two-component, high-build, micaceous iron oxide (MIO) pigmented, polyamide-cured, recoatable epoxy coating

General-purpose epoxy build coat or finish in protective coating systems

Suitable for steel and concrete structures exposed to atmospheric land or marine conditions

Easy application by airless spray, air atomised spray, brush, or roller

Application Methods: Brush, Roller, Air Atomised Spray, Airless Spray

Theoretical Coverage: 6.3 m²/L at 100 microns

Dry Film Thickness (DFT): 75 – 150 microns

Shelf Life: Minimum 24 months (cool, dry storage)

<h3 class="md-block-header-three">Ppg 435 Sigmacover Epoxy Mio Coat (up to Dry Temp 200degC) ( Light Grey) Pack Size 20 Litres</h3><ul class="md-block-unordered-list-item"><li>Best Uses</li></ul>PPG SigmaCover 435 is best suited for use on exterior surfaces such as brick and steel in domestic, commercial and industrial surroundings which are exposed to harsh and extreme weather conditions.This product cures at temperatures as low as -10°C and is resistant to temperatures as high as 200°C.<ul class="md-block-unordered-list-item"><li>Application</li></ul>PPG SigmaCover 435 can be applied using a brush, roller or airless spray and leaves a touch dry finish in around 2-4 hours. Each litre of this products covers an area of roughly 6.3m2<ul class="md-block-unordered-list-item"><li>Surface and Environment</li></ul>PPG SigmaCover 435 is designed for exterior surfaces such as brick and steel which are exposed to harsh weather conditions.TECHNICALFeatures<ul class="md-block-unordered-list-item"><li>Two-component, high-build, micaceous iron oxide (MIO) pigmented, polyamide-cured, recoatable epoxy coating</li><li>General-purpose epoxy build coat or finish in protective coating systems</li><li>Suitable for steel and concrete structures exposed to atmospheric land or marine conditions</li><li>Easy application by airless spray, air atomised spray, brush, or roller</li><li>Cures at temperatures down to -10°C</li></ul>Systems<ul class="md-block-unordered-list-item"><li>PPG 3102 System – Boot Top and Topside</li><li>PPG 3103 System – Decks</li></ul>Technical Information<ul class="md-block-unordered-list-item"><li>Components: Two part</li><li>Type: MIO</li><li>Finish: Eggshell</li><li>Tintable: No</li><li>VOC Content: 344 g/L</li><li>Volume Solids: 63%</li><li>Suitable Substrates: Steel, concrete</li><li>Application Methods: Brush, Roller, Air Atomised Spray, Airless Spray</li><li>Theoretical Coverage: 6.3 m²/L at 100 microns</li><li>Dry Film Thickness (DFT): 75 – 150 microns</li><li>Wet Film Thickness (WFT): –</li><li>Induction Time: –</li><li>Pot Life: 5 hours at 20°C</li><li>Touch Dry: 2 hours at 20°C</li><li>Overcoatable: After 3 hours at 20°C</li><li>Fully Cured: 4 days at 20°C</li><li>Cleaner / Thinner: PPG Thinner 91-92</li><li>Shelf Life: Minimum 24 months (cool, dry storage)</li><li>Packaging: 4 L and 20 L</li></ul>

<h3>Ppg 435 Sigmacover Epoxy Mio Coat (up to Dry Temp 200degC) ( Light Grey) Pack Size 20 Litres</h3>
<ul>
<li>Best Uses</li>
</ul>
PPG SigmaCover 435 is best suited for use on exterior surfaces such as brick and steel in domestic, commercial and industrial surroundings which are exposed to harsh and extreme weather conditions.
This product cures at temperatures as low as -10°C and is resistant to temperatures as high as 200°C.
<ul>
<li>Application</li>
</ul>
PPG SigmaCover 435 can be applied using a brush, roller or airless spray and leaves a touch dry finish in around 2-4 hours. Each litre of this products covers an area of roughly 6.3m2
<ul>
<li>Surface and Environment</li>
</ul>
PPG SigmaCover 435 is designed for exterior surfaces such as brick and steel which are exposed to harsh weather conditions.
TECHNICAL
Features
<ul>
<li>Two-component, high-build, micaceous iron oxide (MIO) pigmented, polyamide-cured, recoatable epoxy coating</li>
<li>General-purpose epoxy build coat or finish in protective coating systems</li>
<li>Suitable for steel and concrete structures exposed to atmospheric land or marine conditions</li>
<li>Easy application by airless spray, air atomised spray, brush, or roller</li>
<li>Cures at temperatures down to -10°C</li>
</ul>
Systems
<ul>
<li>PPG 3102 System – Boot Top and Topside</li>
<li>PPG 3103 System – Decks</li>
</ul>
Technical Information
<ul>
<li>Components: Two part</li>
<li>Type: MIO</li>
<li>Finish: Eggshell</li>
<li>Tintable: No</li>
<li>VOC Content: 344 g/L</li>
<li>Volume Solids: 63%</li>
<li>Suitable Substrates: Steel, concrete</li>
<li>Application Methods: Brush, Roller, Air Atomised Spray, Airless Spray</li>
<li>Theoretical Coverage: 6.3 m²/L at 100 microns</li>
<li>Dry Film Thickness (DFT): 75 – 150 microns</li>
<li>Wet Film Thickness (WFT): –</li>
<li>Induction Time: –</li>
<li>Pot Life: 5 hours at 20°C</li>
<li>Touch Dry: 2 hours at 20°C</li>
<li>Overcoatable: After 3 hours at 20°C</li>
<li>Fully Cured: 4 days at 20°C</li>
<li>Cleaner / Thinner: PPG Thinner 91-92</li>
<li>Shelf Life: Minimum 24 months (cool, dry storage)</li>
<li>Packaging: 4 L and 20 L</li>
</ul>

Product Datasheet

Safety Datasheet

eezee

ppg 435 sigmacover epoxy mio coat (up dry temp 200degc) light grey) pack size 20 litres pg (hingga suhu kering 200 derajat c) (abu-abu muda) ukuran kemasan liter epoksi (sehingga kelabu saiz pek 环氧 涂层（最高干燥温度 摄氏度）（浅灰色）包装规格 环氧胶

ppg-435-sigmacover-epoxy-mio-coat-up-to-dry-temp-200degc-light-grey-pack-size-20-litres

Ppg SigmaCover 456 Epoxy Finish, All Colours

Two-component, high-build, polyamide-cured recoatable epoxy coating for steel and concrete structures exposed to atmospheric land or marine conditions.
 Key properties: Anticorrosive, water- and mild chemical-resistant, cures even at temperatures down to -10°C (14°F).

General-purpose epoxy buildcoat or finish for protective coating systems
 

Suitable for steel and concrete in atmospheric land or marine conditions
 

Easy application by airless spray and brush
 

Tolerant of high humidity (up to 95%) during application and curing without loss of quality
 

Good adhesion to most aged, sound alkyd, chlorinated rubber, and epoxy coatings
 

Can be recoated with two-component and conventional coatings, even after long weathering periods
 

Resistant to water and mild chemical splash
 

Tough and flexible for long-term durability
 

Colours: Standard and custom colours available
 

Epoxy coatings chalk and fade when exposed to sunlight
 

Substrate temperature during application/curing:
 

Minimum: -10°C (14°F), surface must be dry and free of ice
 

Should be at least 3°C (5°F) above dew point
 

In exceptional cases: application possible down to -15°C (5°F), but requires careful control of film thickness to avoid defects (checking, crazing, solvent entrapment)
 

Additional thinning may be required at lower temperatures to maintain viscosity, but this can reduce sag resistance and increase solvent retention
 

Optimal curing and full product performance achieved only when minimum substrate temperature is reached

<h3 class="md-block-header-three">Ppg SigmaCover 456 Epoxy Finish, All Colours</h3>Two-component, high-build, polyamide-cured recoatable epoxy coating for steel and concrete structures exposed to atmospheric land or marine conditions. Key properties: Anticorrosive, water- and mild chemical-resistant, cures even at temperatures down to -10°C (14°F).<h4 class="md-block-header-four">Product Features &amp; Benefits</h4><ul class="md-block-unordered-list-item"><li>General-purpose epoxy buildcoat or finish for protective coating systems </li><li>Suitable for steel and concrete in atmospheric land or marine conditions </li><li>Easy application by airless spray and brush </li><li>Cures down to -10°C (14°F) </li><li>Tolerant of high humidity (up to 95%) during application and curing without loss of quality </li><li>Good adhesion to most aged, sound alkyd, chlorinated rubber, and epoxy coatings </li><li>Can be recoated with two-component and conventional coatings, even after long weathering periods </li><li>Resistant to water and mild chemical splash </li><li>Excellent corrosion resistance </li><li>Tough and flexible for long-term durability </li><li>Colours: Standard and custom colours available </li><li>Gloss level: Semi-gloss </li></ul><h4 class="md-block-header-four">Method of Application</h4><ul class="md-block-unordered-list-item"><li>Air spray </li><li>Airless spray </li><li>Brush/Roller </li></ul><h4 class="md-block-header-four">Notes</h4><ul class="md-block-unordered-list-item"><li>Epoxy coatings chalk and fade when exposed to sunlight </li><li>Substrate temperature during application/curing: </li><ul class="md-block-unordered-list-item"><li>Minimum: -10°C (14°F), surface must be dry and free of ice </li><li>Should be at least 3°C (5°F) above dew point </li><li>In exceptional cases: application possible down to -15°C (5°F), but requires careful control of film thickness to avoid defects (checking, crazing, solvent entrapment) </li></ul><li>Additional thinning may be required at lower temperatures to maintain viscosity, but this can reduce sag resistance and increase solvent retention </li><li>Optimal curing and full product performance achieved only when minimum substrate temperature is reached</li></ul>

<h3>Ppg SigmaCover 456 Epoxy Finish, All Colours</h3>
Two-component, high-build, polyamide-cured recoatable epoxy coating for steel and concrete structures exposed to atmospheric land or marine conditions. 
 Key properties: Anticorrosive, water- and mild chemical-resistant, cures even at temperatures down to -10°C (14°F).
<h4>Product Features &amp; Benefits</h4>
<ul>
<li>General-purpose epoxy buildcoat or finish for protective coating systems 
&nbsp;</li>
<li>Suitable for steel and concrete in atmospheric land or marine conditions 
&nbsp;</li>
<li>Easy application by airless spray and brush 
&nbsp;</li>
<li>Cures down to -10°C (14°F) 
&nbsp;</li>
<li>Tolerant of high humidity (up to 95%) during application and curing without loss of quality 
&nbsp;</li>
<li>Good adhesion to most aged, sound alkyd, chlorinated rubber, and epoxy coatings 
&nbsp;</li>
<li>Can be recoated with two-component and conventional coatings, even after long weathering periods 
&nbsp;</li>
<li>Resistant to water and mild chemical splash 
&nbsp;</li>
<li>Excellent corrosion resistance 
&nbsp;</li>
<li>Tough and flexible for long-term durability 
&nbsp;</li>
<li>Colours: Standard and custom colours available 
&nbsp;</li>
<li>Gloss level: Semi-gloss 
&nbsp;</li>
</ul>
<h4>Method of Application</h4>
<ul>
<li>Air spray 
&nbsp;</li>
<li>Airless spray 
&nbsp;</li>
<li>Brush/Roller 
&nbsp;</li>
</ul>
<h4>Notes</h4>
<ul>
<li>Epoxy coatings chalk and fade when exposed to sunlight 
&nbsp;</li>
<li>Substrate temperature during application/curing: 
&nbsp;</li>
<ul>
<li>Minimum: -10°C (14°F), surface must be dry and free of ice 
&nbsp;</li>
<li>Should be at least 3°C (5°F) above dew point 
&nbsp;</li>
<li>In exceptional cases: application possible down to -15°C (5°F), but requires careful control of film thickness to avoid defects (checking, crazing, solvent entrapment) 
&nbsp;</li>
</ul>
<li>Additional thinning may be required at lower temperatures to maintain viscosity, but this can reduce sag resistance and increase solvent retention 
&nbsp;</li>
<li>Optimal curing and full product performance achieved only when minimum substrate temperature is reached</li>
</ul>

ppg sigmacover 456 epoxy finish, colours semua warna epoksi kemasan epoksi, 环氧涂层，所有颜色 环氧胶

ppg-sigmacover-456-epoxy-finish-all-colours

Size

00-A-05

10-B-15 Gardenia

Black

Red Brown

White

Color

Coverage - Roller : 4.6 m² per 3.78 l (50 ft²/gal)

Coverage - Trowel : 3.7 m² per 3.78 l (40 ft²/gal) 

<h3 class="md-block-header-three">Features:</h3><ul class="md-block-unordered-list-item"><li>Two-component Epoxy Resin Coating designed for application in areas of heavy pedestrian traffic or light rolling traffic under typical dry service temperatures of -29°C to 60°C (-20°F to 140°F)</li><li>Easy and fast to apply by paint brush or roller</li><li>Reduces accidents (slips and falls) in the workplace</li><li>Fire retardant in the cured state</li><li>Resists gasoline, oil, acids, alkalis and aliphatic solvents</li><li>Available in yellow, grey or green</li></ul><h3 class="md-block-header-three">Applications:</h3><ul class="md-block-unordered-list-item"><li>Typical applications include a non-slip finish for concrete and steel ramps, walkways, locker rooms, loading docks, marine applications, machine rooms assembly areas and stairs</li></ul><h3 class="md-block-header-three">Specification:</h3><ul class="md-block-unordered-list-item"><li>Brand: SealXpert</li><li>Product Type: Anti Slip Floor Coating</li><li>Size: 3.8 Litres</li><li>Volume of solids: 62 %</li><li>Mix ratio - by weight : 7.5:1 </li><li>Mix ratio - by volume: 4.4:1 </li><li>Coverage - Roller : 4.6 m² per 3.78 l (50 ft²/gal)</li><li>Coverage - Trowel : 3.7 m² per 3.78 l (40 ft²/gal) </li><li>Dry time at 21°C : 12 hr</li></ul>

<h3>Features:</h3>
<ul>
<li>Two-component Epoxy Resin Coating designed for application in areas of heavy pedestrian traffic or light rolling traffic under typical dry service temperatures of -29°C to 60°C (-20°F to 140°F)</li>
<li>Easy and fast to apply by paint brush or roller</li>
<li>Reduces accidents (slips and falls) in the workplace</li>
<li>Fire retardant in the cured state</li>
<li>Resists gasoline, oil, acids, alkalis and aliphatic solvents</li>
<li>Available in yellow, grey or green</li>
</ul>
<h3>Applications:</h3>
<ul>
<li>Typical applications include a non-slip finish for concrete and steel ramps, walkways, locker rooms, loading docks, marine applications, machine rooms assembly areas and stairs</li>
</ul>
<h3>Specification:</h3>
<ul>
<li>Brand: SealXpert</li>
<li>Product Type: Anti Slip Floor Coating</li>
<li>Size: 3.8 Litres</li>
<li>Volume of solids: 62 %</li>
<li>Mix ratio - by weight : 7.5:1&nbsp;</li>
<li>Mix ratio - by volume: 4.4:1&nbsp;</li>
<li>Coverage - Roller : 4.6 m² per 3.78 l (50 ft²/gal)</li>
<li>Coverage - Trowel : 3.7 m² per 3.78 l (40 ft²/gal)&nbsp;</li>
<li>Dry time at 21°C : 12 hr</li>
</ul>

Sam Cheok Whai 

Sealxpert Anti-Slip Floor Coating (NS38) (3.8 Litres)

sealxpert anti-slip floor coating (ns38) (3.8 litres) pelapis lantai anti selip (3,8 liter) slip coatings lapisan salutan gelincir sealxpert/密封件 防滑地板涂料 (ns38)（3.8 升） 防滑涂料 密封件

sealxpert-anti-slip-floor-coating-ns38-3-8-litres

Ppg 620 Sigmashield Modified Epoxy ( Black, Grey or Custom Colour) Pack Size 20 Litres

Two component amine cured high solids epoxy coating.

• Specialized coating for use under SIGMAGLIDE fouling release system
• Excellent impact resistance
• Excellent water resistance

<h3 class="md-block-header-three">Ppg 620 Sigmashield Modified Epoxy ( Black, Grey or Custom Colour) Pack Size 20 Litres</h3>DescriptionTwo component amine cured high solids epoxy coating.Principal Characteristics• Specialized coating for use under SIGMAGLIDE fouling release system • Excellent impact resistance • Excellent water resistance

<h3>Ppg 620 Sigmashield Modified Epoxy ( Black, Grey or Custom Colour) Pack Size 20 Litres</h3>
Description
Two component amine cured high solids epoxy coating.
Principal Characteristics
• Specialized coating for use under SIGMAGLIDE fouling release system 
• Excellent impact resistance 
• Excellent water resistance

ppg 620 sigmashield modified epoxy black, grey custom colour) pack size 20 litres (hitam, abu-abu atau warna kustom) ukuran kemasan liter epoksi hitam, kelabu tersuai) saiz pek 改性环氧树脂（黑色、灰色或定制颜色）包装规格 环氧胶

ppg-620-sigmashield-modified-epoxy-black-grey-or-custom-colour-pack-size-20-litres

Custom Colour

Colour

SealXpert Clear Epoxy with Hardener is a strong, solvent-free adhesive suitable for all materials, ideal for durable bonding and repairs.

Strong 2-component epoxy with long working time

Bonds metal, wood, masonry, ceramics, glass, dry concrete, chipboard, leather, cardboard, fabric, rubber and most plastics (except polyethylene, polypropylene, teflon).

SealXpert Clear Epoxy with Hardener is a strong, solvent-free adhesive suitable for all materials, ideal for durable bonding and repairs.<h3 class="md-block-header-three">Features:</h3><ul class="md-block-unordered-list-item"><li>Strong 2-component epoxy with long working time</li><li>Oil, chemical and impact resistant</li><li>High temperature resistance</li><li>Withstands rough handling</li><li>Wide service temperature range</li></ul><h3 class="md-block-header-three">Typical Applications:</h3><ul class="md-block-unordered-list-item"><li>Bonds metal, wood, masonry, ceramics, glass, dry concrete, chipboard, leather, cardboard, fabric, rubber and most plastics (except polyethylene, polypropylene, teflon).</li></ul>

SealXpert Clear Epoxy with Hardener is a strong, solvent-free adhesive suitable for all materials, ideal for durable bonding and repairs.
<h3>Features:</h3>
<ul>
<li>Strong 2-component epoxy with long working time</li>
<li>Oil, chemical and impact resistant</li>
<li>High temperature resistance</li>
<li>Withstands rough handling</li>
<li>Wide service temperature range</li>
</ul>
<h3>Typical Applications:</h3>
<ul>
<li>Bonds metal, wood, masonry, ceramics, glass, dry concrete, chipboard, leather, cardboard, fabric, rubber and most plastics (except polyethylene, polypropylene, teflon).</li>
</ul>

Sealxpert Clear Epoxy With Hardener (CE050) (50ml)

sealxpert clear epoxy hardener (ce050) (50ml) hapus epoksi dengan pengeras jelas sealxpert/密封件 透明环氧树脂，含固化剂 环氧胶 密封件

sealxpert-clear-epoxy-with-hardener-ce050-50ml

Araldite 2011 epoxy structural adhesive is a slow set/slow cure, multipurpose, thinner, low-viscosity, room temperature setting, epoxy adhesive with high strength and toughness. This Araldite 2-hour epoxy is ideal to bond with a wide variety of materials, including most metals, ceramics, plastics, glass, rubber, stone, rock, ceramic, concrete, foams, glass, GRP, carbon fiber, fiberglass, Teflon and wood. It has a good electrical resistance and heat resistance and provides a long 2-hour working life. Once thoroughly mixed, it leaves a translucent pale yellow colored bond.


Araldite 2011 epoxy is a two-part, multipurpose, electrically insulating, structural epoxy adhesive. It cures at temperatures ranging from 20 to 180 degrees Celsius with no release or emissions of unstable or volatile compounds. It boasts a wide variety of users, from DIY & craftsman to Aerospace, Space, Aircraft, Manufacturing, and many other industrial applications.

The strength and the durability of this epoxy formula are exceptional but also practically dependent on what is being bonded together. If it's a weak or poorly-treated or poorly-prepared surface to begin with, the surface will fail before the epoxy. All grease, dirt, oil, paint, finishes, and coatings need to be removed before applying this epoxy formula. It can be applied manually using a spatula or dispensing applicator or mechanically or robotically to dry pretreated joints. For the greatest shear and peel strength, it is recommended to apply a layer of this formula of about .05 to .10 mm thick. As soon as the Araldite 2011 is applied, the joints should be immediately assembled and clamped, allowing proper cure.

Araldite 2011 is also known by its bulk resin names, Araldite AW106 resin & Araldite HV953U hardener. And Araldite 2011 can be ordered in a variety of package sizes: 50ml cartridges as Araldite 2859208, 200ml cartridges as Araldite 2859408, 1-Quart pail kits as Araldite 744908, and 2-gallon pail kits as Araldite 161040

Please Note:  These cartridges are designed to work best with a 50ml or 200ml cartridge Dispenser, respectively.  We advise you use a 50ml or 200ml Dispenser for all respective cartridges.  If you do not have one, please check out our Dispensers, all are excellent products and have our 'it's good' seal of approval.

If you prefer not to use a Dispenser, all 50ml cartridge orders we sell will come with one manual hand plunger, as pictured, that you can use for fast small jobs.  But the 200ml cartridges really need to use a 200ml Dispenser, they're just too big to easily use without the dispenser.

Excellent General Purpose Slow-Set Epoxy for Craftsmen, DIY, and Industrial uses

Electrically Insulating (does not conduct)

Part Numbers : 50ml Cartridges - 2859208

Product Dimensions : 50ml Cartridges: 6 x 2 x 1 inches

Included Components : Quick Connect Fixtures 

Teflon Bonding Using Araldite 2011 as the adhesive has proven successful when the proper procedures are followed. 

Surface Preparation: Virgin PTFE is white in color and will not readily bond unless chemically etched with etchants such as Tetra Etch. Bonding other materials to teflon will also require proper surface preparation.

Adhesive Application: Araldite 2011, aka, Araldite AW106 resin and HV 953U hardener has been proved to work well. The adhesive should be applied both to both surfaces and be spread as uniformly as possible by means of a serrated spatula. 

Araldite 2011 epoxy structural adhesive is a slow set/slow cure, multipurpose, thinner, low-viscosity, room temperature setting, epoxy adhesive with high strength and toughness. This Araldite 2-hour epoxy is ideal to bond with a wide variety of materials, including most metals, ceramics, plastics, glass, rubber, stone, rock, ceramic, concrete, foams, glass, GRP, carbon fiber, fiberglass, Teflon and wood. It has a good electrical resistance and heat resistance and provides a long 2-hour working life. Once thoroughly mixed, it leaves a translucent pale yellow colored bond. Araldite 2011 epoxy is a two-part, multipurpose, electrically insulating, structural epoxy adhesive. It cures at temperatures ranging from 20 to 180 degrees Celsius with no release or emissions of unstable or volatile compounds. It boasts a wide variety of users, from DIY &amp; craftsman to Aerospace, Space, Aircraft, Manufacturing, and many other industrial applications.The strength and the durability of this epoxy formula are exceptional but also practically dependent on what is being bonded together. If it&#x27;s a weak or poorly-treated or poorly-prepared surface to begin with, the surface will fail before the epoxy. All grease, dirt, oil, paint, finishes, and coatings need to be removed before applying this epoxy formula. It can be applied manually using a spatula or dispensing applicator or mechanically or robotically to dry pretreated joints. For the greatest shear and peel strength, it is recommended to apply a layer of this formula of about .05 to .10 mm thick. As soon as the Araldite 2011 is applied, the joints should be immediately assembled and clamped, allowing proper cure.Araldite 2011 is also known by its bulk resin names, Araldite AW106 resin &amp; Araldite HV953U hardener. And Araldite 2011 can be ordered in a variety of package sizes: 50ml cartridges as Araldite 2859208, 200ml cartridges as Araldite 2859408, 1-Quart pail kits as Araldite 744908, and 2-gallon pail kits as Araldite 161040Please Note:  These cartridges are designed to work best with a 50ml or 200ml cartridge Dispenser, respectively.  We advise you use a 50ml or 200ml Dispenser for all respective cartridges.  If you do not have one, please check out our Dispensers, all are excellent products and have our &#x27;it&#x27;s good&#x27; seal of approval.If you prefer not to use a Dispenser, all 50ml cartridge orders we sell will come with one manual hand plunger, as pictured, that you can use for fast small jobs.  But the 200ml cartridges really need to use a 200ml Dispenser, they&#x27;re just too big to easily use without the dispenser.Key Features<ul class="md-block-unordered-list-item"><li>120 Min Working Time</li><li>Excellent General Purpose Slow-Set Epoxy for Craftsmen, DIY, and Industrial uses</li><li>High Shear and Peal Strength</li><li>Bonds to wide variety of materials</li><li>Electrically Insulating (does not conduct)</li></ul>Technical SpecsPart Numbers : 50ml Cartridges - 2859208Product Dimensions : 50ml Cartridges: 6 x 2 x 1 inchesOrigin : Made in USAItem model number : 2011Color : Near-translucent, amber tintMaterial : EpoxyItem Package Quantity : 1Number Of Piece s1Maximum Pressure : 2800 PSIMeasurement System :metricSpecial Features : Impact ReadyIncluded Components : Quick Connect Fixtures Teflon Bonding Using Araldite 2011 as the adhesive has proven successful when the proper procedures are followed. Surface Preparation: Virgin PTFE is white in color and will not readily bond unless chemically etched with etchants such as Tetra Etch. Bonding other materials to teflon will also require proper surface preparation.Adhesive Application: Araldite 2011, aka, Araldite AW106 resin and HV 953U hardener has been proved to work well. The adhesive should be applied both to both surfaces and be spread as uniformly as possible by means of a serrated spatula. Curing: Application of even, light clamping pressure while adhesive is recommended. Clean-up: Squeeze out adhesive, not cleaned prior to hardening can be accomplished using traditional machining or sanding methods.

Araldite 2011 epoxy structural adhesive is a slow set/slow cure, multipurpose, thinner, low-viscosity, room temperature setting, epoxy adhesive with high strength and toughness. This Araldite 2-hour epoxy is ideal to bond with a wide variety of materials, including most metals, ceramics, plastics, glass, rubber, stone, rock, ceramic, concrete, foams, glass, GRP, carbon fiber, fiberglass, Teflon and wood. It has a good electrical resistance and heat resistance and provides a long 2-hour working life. Once thoroughly mixed, it leaves a translucent pale yellow colored bond. 

Araldite 2011 epoxy is a two-part, multipurpose, electrically insulating, structural epoxy adhesive. It cures at temperatures ranging from 20 to 180 degrees Celsius with no release or emissions of unstable or volatile compounds. It boasts a wide variety of users, from DIY &amp; craftsman to Aerospace, Space, Aircraft, Manufacturing, and many other industrial applications.
The strength and the durability of this epoxy formula are exceptional but also practically dependent on what is being bonded together. If it's a weak or poorly-treated or poorly-prepared surface to begin with, the surface will fail before the epoxy. All grease, dirt, oil, paint, finishes, and coatings need to be removed before applying this epoxy formula. It can be applied manually using a spatula or dispensing applicator or mechanically or robotically to dry pretreated joints. For the greatest shear and peel strength, it is recommended to apply a layer of this formula of about .05 to .10 mm thick. As soon as the Araldite 2011 is applied, the joints should be immediately assembled and clamped, allowing proper cure.
Araldite 2011 is also known by its bulk resin names, Araldite AW106 resin &amp; Araldite HV953U hardener. And Araldite 2011 can be ordered in a variety of package sizes: 50ml cartridges as Araldite 2859208, 200ml cartridges as Araldite 2859408, 1-Quart pail kits as Araldite 744908, and 2-gallon pail kits as Araldite 161040
Please Note:  These cartridges are designed to work best with a 50ml or 200ml cartridge Dispenser, respectively.  We advise you use a 50ml or 200ml Dispenser for all respective cartridges.  If you do not have one, please check out our Dispensers, all are excellent products and have our 'it's good' seal of approval.
If you prefer not to use a Dispenser, all 50ml cartridge orders we sell will come with one manual hand plunger, as pictured, that you can use for fast small jobs.  But the 200ml cartridges really need to use a 200ml Dispenser, they're just too big to easily use without the dispenser.
Key Features
<ul>
<li>120 Min Working Time</li>
<li>Excellent General Purpose Slow-Set Epoxy for Craftsmen, DIY, and Industrial uses</li>
<li>High Shear and Peal Strength</li>
<li>Bonds to wide variety of materials</li>
<li>Electrically Insulating (does not conduct)</li>
</ul>
Technical Specs
Part Numbers : 50ml Cartridges - 2859208
Product Dimensions : 50ml Cartridges: 6 x 2 x 1 inches
Origin : Made in USA
Item model number : 2011
Color : Near-translucent, amber tint
Material : Epoxy
Item Package Quantity : 1
Number Of Piece s1
Maximum Pressure : 2800 PSI
Measurement System :metric
Special Features : Impact Ready
Included Components : Quick Connect Fixtures&nbsp;
Teflon Bonding Using Araldite 2011 as the adhesive has proven successful when the proper procedures are followed. 
Surface Preparation: Virgin PTFE is white in color and will not readily bond unless chemically etched with etchants such as Tetra Etch. Bonding other materials to teflon will also require proper surface preparation.
Adhesive Application: Araldite 2011, aka, Araldite AW106 resin and HV 953U hardener has been proved to work well. The adhesive should be applied both to both surfaces and be spread as uniformly as possible by means of a serrated spatula. 
Curing: Application of even, light clamping pressure while adhesive is recommended. 
Clean-up: Squeeze out adhesive, not cleaned prior to hardening can be accomplished using traditional machining or sanding methods.

Araldite 2011 2-part Slow-Setting All-Purpose Epoxy - 5oml Cartridge

araldite 2011 2-part slow-setting all-purpose epoxy 5oml cartridge bagian epoksi serbaguna pengaturan lambat kartrid adhesive glue lem perekat bahagian tetapan perlahan serba guna kartrij gam pelekat araldite/爱牢达 部分慢凝通用环氧树脂 墨盒 胶水 爱牢达