FLUKE

Test & Measurement

test-measurement

Electrical Power Testing

electrical-power-testing

Pressure Measurement

pressure-measurement

 Fluke's integrated solution for calibration, maintenance of milliamp loops and repair, the 705 current loop calibrator is an ideal cost-effective source and measurement tool.


Delivering a mA accuracy of 0.02% it also provides quick and easy readings due to the simultaneous % and mA display. For 0 to 20 mA or 4 to 20 mA current loop testing and dc voltage from 0 to 28 V, it is supplied with a set of TL75 test leads (726-3624) and alligator clips.


• 0.02% accuracy
• 24 V loop supply with mA measure
• Simultaneous mA and % of span display
• Selectable step/ramp outputs
• mA sourcing, simulation and measurement
• Compact case and protective holster
• Quick battery replacement


Current loop calibrators are specially designed instruments for current loop trouble shooting, testing and calibration. They can source current on unpowered devices in a loop, simulate the operation of loop powered transmitters and also measure current. These calibrators often feature time saving technology, specialist graphics using digital interfaces and micro-processor based electronics.


How much current flows in each loop of a parallel circuit?

Determined by Ohm's law, which states that the current between 2 points through a conductor is directly proportionate to the voltage across those 2 points, divided by the resistance of the conductor. I = V/R. This is also the case for series and parallel circuits, however in parallel circuits the total current can be affected by the way the resistors have been connected, as well as their ohmic value. Current does divide up and there can be more current in one area over another nonetheless when all areas are added up the total amount is the same.


9V installed alkaline battery, AC70A alligator clips, C10 protective yellow holster Flex-Stand™, instruction sheet, TL75 safety-designed test lead set, NIST- traceable calibration report and data

FLUKE Loop Calibrator, -10°C to +55°C Operating Temperature, Shock and Vibration Resistant - 705 Series - 0665091

Troubleshooting circuits is fuss-free with this loop calibrator from FLUKE. Use it to calibrate and test current loops so you can identify and repair faults promptly to keep your system running safely. You can expect precise current readings thanks to the unit's tight mA accuracy of 0.02%. The results are quick and easy to interpret too, as having readouts as both mA and % means you always get the full picture. As it's protected by a handy yellow holster, this gadget withstands knocks for reliable use in demanding industrial settings.


• Helpful for linearity checks thanks to its dedicated push button for 25% increments
• Switchable between stepped or ramped output to meet your application needs
• 9V battery is easy to change without opening the case and affecting the calibration seal
• 'Span check' function gives you speedily calculated results for zero and span measurements


• Test and measurement devices
• Research and development labs
• Electronics servicing


What's the benefit of this product's internal loop supply?

This product's 24V internal loop supply provides advanced functionality, as it lets you power and read a transmitter at the same time. This eliminates the need for a separate digital multimeter and PSU. 

<h3 class="md-block-header-three"><strong class="md-inline-bold">Fluke 705, 24mA Loop Calibrator</strong></h3><p class="md-block-unstyled"> Fluke&#x27;s integrated solution for calibration, maintenance of milliamp loops and repair, the 705 current loop calibrator is an ideal cost-effective source and measurement tool.<br/></p><p class="md-block-unstyled">Delivering a mA accuracy of 0.02% it also provides quick and easy readings due to the simultaneous % and mA display. For 0 to 20 mA or 4 to 20 mA current loop testing and dc voltage from 0 to 28 V, it is supplied with a set of TL75 test leads (726-3624) and alligator clips.<br/></p><h3 class="md-block-header-three"><strong class="md-inline-bold">Features and Benefits:</strong></h3><p class="md-block-unstyled">• 0.02% accuracy<br/>• 24 V loop supply with mA measure<br/>• Simultaneous mA and % of span display<br/>• Selectable step/ramp outputs<br/>• mA sourcing, simulation and measurement<br/>• Compact case and protective holster<br/>• Quick battery replacement<br/></p><h3 class="md-block-header-three"><strong class="md-inline-bold">FAQ&#x27;s</strong></h3><h3 class="md-block-header-three"><strong class="md-inline-bold">What is a current loop calibrator?</strong></h3><p class="md-block-unstyled">Current loop calibrators are specially designed instruments for current loop trouble shooting, testing and calibration. They can source current on unpowered devices in a loop, simulate the operation of loop powered transmitters and also measure current. These calibrators often feature time saving technology, specialist graphics using digital interfaces and micro-processor based electronics.<br/></p><h3 class="md-block-header-three"><strong class="md-inline-bold">How much current flows in each loop of a parallel circuit?</strong></h3><p class="md-block-unstyled">Determined by Ohm&#x27;s law, which states that the current between 2 points through a conductor is directly proportionate to the voltage across those 2 points, divided by the resistance of the conductor. I = V/R. This is also the case for series and parallel circuits, however in parallel circuits the total current can be affected by the way the resistors have been connected, as well as their ohmic value. Current does divide up and there can be more current in one area over another nonetheless when all areas are added up the total amount is the same.<br/></p><h3 class="md-block-header-three"><strong class="md-inline-bold">Supplied with</strong></h3><p class="md-block-unstyled">9V installed alkaline battery, AC70A alligator clips, C10 protective yellow holster Flex-Stand™, instruction sheet, TL75 safety-designed test lead set, NIST- traceable calibration report and data</p><h3 class="md-block-header-three"><strong class="md-inline-bold">FLUKE Loop Calibrator, -10°C to +55°C Operating Temperature, Shock and Vibration Resistant - 705 Series - 0665091</strong></h3><p class="md-block-unstyled">Troubleshooting circuits is fuss-free with this loop calibrator from FLUKE. Use it to calibrate and test current loops so you can identify and repair faults promptly to keep your system running safely. You can expect precise current readings thanks to the unit&#x27;s tight mA accuracy of 0.02%. The results are quick and easy to interpret too, as having readouts as both mA and % means you always get the full picture. As it&#x27;s protected by a handy yellow holster, this gadget withstands knocks for reliable use in demanding industrial settings.<br/></p><h3 class="md-block-header-three"><strong class="md-inline-bold">Features &amp; Benefits</strong></h3><p class="md-block-unstyled">• Helpful for linearity checks thanks to its dedicated push button for 25% increments<br/>• Switchable between stepped or ramped output to meet your application needs<br/>• 9V battery is easy to change without opening the case and affecting the calibration seal<br/>• &#x27;Span check&#x27; function gives you speedily calculated results for zero and span measurements<br/></p><h3 class="md-block-header-three"><strong class="md-inline-bold">Applications</strong></h3><p class="md-block-unstyled">• Test and measurement devices<br/>• Research and development labs<br/>• Electronics servicing<br/></p><h3 class="md-block-header-three"><strong class="md-inline-bold">What&#x27;s the benefit of this product&#x27;s internal loop supply?</strong></h3><p class="md-block-unstyled">This product&#x27;s 24V internal loop supply provides advanced functionality, as it lets you power and read a transmitter at the same time. This eliminates the need for a separate digital multimeter and PSU. </p>

<h3><strong>Fluke 705, 24mA Loop Calibrator</strong></h3>
<p>&nbsp;Fluke's integrated solution for calibration, maintenance of milliamp loops and repair, the 705 current loop calibrator is an ideal cost-effective source and measurement tool.<br>
</p>
<p>Delivering a mA accuracy of 0.02% it also provides quick and easy readings due to the simultaneous % and mA display. For 0 to 20 mA or 4 to 20 mA current loop testing and dc voltage from 0 to 28 V, it is supplied with a set of TL75 test leads (726-3624) and alligator clips.<br>
</p>
<h3><strong>Features and Benefits:</strong></h3>
<p>• 0.02% accuracy<br>
• 24 V loop supply with mA measure<br>
• Simultaneous mA and % of span display<br>
• Selectable step/ramp outputs<br>
• mA sourcing, simulation and measurement<br>
• Compact case and protective holster<br>
• Quick battery replacement<br>
</p>
<h3><strong>FAQ's</strong></h3>
<h3><strong>What is a current loop calibrator?</strong></h3>
<p>Current loop calibrators are specially designed instruments for current loop trouble shooting, testing and calibration. They can source current on unpowered devices in a loop, simulate the operation of loop powered transmitters and also measure current. These calibrators often feature time saving technology, specialist graphics using digital interfaces and micro-processor based electronics.<br>
</p>
<h3><strong>How much current flows in each loop of a parallel circuit?</strong></h3>
<p>Determined by Ohm's law, which states that the current between 2 points through a conductor is directly proportionate to the voltage across those 2 points, divided by the resistance of the conductor. I = V/R. This is also the case for series and parallel circuits, however in parallel circuits the total current can be affected by the way the resistors have been connected, as well as their ohmic value. Current does divide up and there can be more current in one area over another nonetheless when all areas are added up the total amount is the same.<br>
</p>
<h3><strong>Supplied with</strong></h3>
<p>9V installed alkaline battery, AC70A alligator clips, C10 protective yellow holster Flex-Stand™, instruction sheet, TL75 safety-designed test lead set, NIST- traceable calibration report and data</p>
<h3><strong>FLUKE Loop Calibrator, -10°C to +55°C Operating Temperature, Shock and Vibration Resistant - 705 Series - 0665091</strong></h3>
<p>Troubleshooting circuits is fuss-free with this loop calibrator from FLUKE. Use it to calibrate and test current loops so you can identify and repair faults promptly to keep your system running safely. You can expect precise current readings thanks to the unit's tight mA accuracy of 0.02%. The results are quick and easy to interpret too, as having readouts as both mA and % means you always get the full picture. As it's protected by a handy yellow holster, this gadget withstands knocks for reliable use in demanding industrial settings.<br>
</p>
<h3><strong>Features &amp; Benefits</strong></h3>
<p>• Helpful for linearity checks thanks to its dedicated push button for 25% increments<br>
• Switchable between stepped or ramped output to meet your application needs<br>
• 9V battery is easy to change without opening the case and affecting the calibration seal<br>
• 'Span check' function gives you speedily calculated results for zero and span measurements<br>
</p>
<h3><strong>Applications</strong></h3>
<p>• Test and measurement devices<br>
• Research and development labs<br>
• Electronics servicing<br>
</p>
<h3><strong>What's the benefit of this product's internal loop supply?</strong></h3>
<p>This product's 24V internal loop supply provides advanced functionality, as it lets you power and read a transmitter at the same time. This eliminates the need for a separate digital multimeter and PSU.&nbsp;</p>


RS Pro

SCHNEIDER ELECTRIC

Fluke Networks

Abus

Screw

O Ring

Surface Mount Resistors

Circular Connectors

Contactors

Bolts

Panel Mount Indicators 

Molded Case Circuit Breakers - MCCBs

Junction & Enclosure Box

Electrical Wire 

RS Components ETH SG

buyerIntroduction

Fluke 705, 24mA Loop Calibrator

fluke 705, 24ma loop calibrator kalibrator electrical power testing pengujian daya listrik gelung ujian tenaga elektrik fluke/福禄克 705，24ma 回路校准器 电力测试 福禄克

fluke-705-24ma-loop-calibrator

Fluke 717 0psi to 10000psi Pressure Calibrator

Fluke 717 Series pressure calibrators offer performance, durability and reliability. They are compact, lightweight and easy to carry and use (with well-designed push button interface). They are EMI-tolerant, dust and splash resistant and have a removable battery door for quick battery changes.
Compact size 201 x 98 x 52 mm (L x W x D)
Zero, min, max and hold functions
Calibrates P/I instruments with simultaneous pressure and current measurement
Pressure switch test function captures set, reset and Deadband values of pressure switch
Error % calculation of mA measurements for quick pass-fail decisions
Compatible with non-corrosive gases and liquids
Long battery life using single 9V battery ANSI/NEDA 1604A or IEC 6LR61 9V alkaline
Protective yellow holster incorporates test lead storage

Holster, instructions (14 languages), 9V alkaline battery, test leads and alligator clips, NIST-traceable calibration report and data

<h3 class="md-block-header-three"><strong class="md-inline-bold">Fluke 717 0psi to 10000psi Pressure Calibrator</strong></h3><ul class="md-block-unordered-list-item"><li> Maximum Pressure Measurement	10000psi</li><li>Minimum Pressure Measurement	0psi</li><li>Pressure Port Type	Differential</li><li>Model Number p	717</li><li>Current Loop Measurement	Yes</li><li>Leak Testing	Yes</li><li>Maximum Operating Temperature	+55°C</li><li>Minimum Operating Temperature	-10°C</li><li>Weight	600g</li><li>Dimensions	201 x 98 x 52mm</li><li>Height	52mm</li><li>Length	201mm</li><li>Width	98mm</li></ul><p class="md-block-unstyled">Fluke 717 Series pressure calibrators offer performance, durability and reliability. They are compact, lightweight and easy to carry and use (with well-designed push button interface). They are EMI-tolerant, dust and splash resistant and have a removable battery door for quick battery changes.<br/>Compact size 201 x 98 x 52 mm (L x W x D)<br/>Zero, min, max and hold functions<br/>Calibrates P/I instruments with simultaneous pressure and current measurement<br/>Pressure switch test function captures set, reset and Deadband values of pressure switch<br/>Error % calculation of mA measurements for quick pass-fail decisions<br/>Compatible with non-corrosive gases and liquids<br/>Long battery life using single 9V battery ANSI/NEDA 1604A or IEC 6LR61 9V alkaline<br/>Protective yellow holster incorporates test lead storage</p><p class="md-block-unstyled"><strong class="md-inline-bold">Approvals</strong></p><p class="md-block-unstyled">CSA</p><p class="md-block-unstyled"><strong class="md-inline-bold">Supplied with</strong></p><p class="md-block-unstyled">Holster, instructions (14 languages), 9V alkaline battery, test leads and alligator clips, NIST-traceable calibration report and data</p><p class="md-block-unstyled"><strong class="md-inline-bold">Approvals</strong></p><p class="md-block-unstyled">CSA </p>

<h3><strong>Fluke 717 0psi to 10000psi Pressure Calibrator</strong></h3>
<ul>
<li>&nbsp;Maximum Pressure Measurement	10000psi</li>
<li>Minimum Pressure Measurement	0psi</li>
<li>Pressure Port Type	Differential</li>
<li>Model Number p	717</li>
<li>Current Loop Measurement	Yes</li>
<li>Leak Testing	Yes</li>
<li>Maximum Operating Temperature	+55°C</li>
<li>Minimum Operating Temperature	-10°C</li>
<li>Weight	600g</li>
<li>Dimensions	201 x 98 x 52mm</li>
<li>Height	52mm</li>
<li>Length	201mm</li>
<li>Width	98mm</li>
</ul>
<p>Fluke 717 Series pressure calibrators offer performance, durability and reliability. They are compact, lightweight and easy to carry and use (with well-designed push button interface). They are EMI-tolerant, dust and splash resistant and have a removable battery door for quick battery changes.<br>
Compact size 201 x 98 x 52 mm (L x W x D)<br>
Zero, min, max and hold functions<br>
Calibrates P/I instruments with simultaneous pressure and current measurement<br>
Pressure switch test function captures set, reset and Deadband values of pressure switch<br>
Error % calculation of mA measurements for quick pass-fail decisions<br>
Compatible with non-corrosive gases and liquids<br>
Long battery life using single 9V battery ANSI/NEDA 1604A or IEC 6LR61 9V alkaline<br>
Protective yellow holster incorporates test lead storage</p>
<p><strong>Approvals</strong></p>
<p>CSA</p>
<p><strong>Supplied with</strong></p>
<p>Holster, instructions (14 languages), 9V alkaline battery, test leads and alligator clips, NIST-traceable calibration report and data</p>
<p><strong>Approvals</strong></p>
<p>CSA&nbsp;</p>
