CETM Calibration

Extech

HIOKI

Vogel

Test & Measurement

test-measurement

Electrical Power Testing

electrical-power-testing

EMF & Frequency Meters

emf-frequency-meters

Flow & PH Meters

flow-ph-meters

Multimeters

multimeters

Services

services

Traceable Calibration Services

traceable-calibration-services

Matthew Lee

buyerIntroduction

Cetm 350 Traceable Calibration for TPI 1010A Meter

cetm 350 traceable calibration tpi 1010a meter kalibrasi yang dapat dilacak untuk services penentukuran boleh kesan 可追溯校准，适用于 仪表 校准

cetm-350-traceable-calibration-for-tpi-1010a-meter

Hioki portable battery testers support the maintenance of UPS and storage batteries critical to the life support of all businesses. The BT3554-51 battery internal resistance tester sets the standard for assessing the deterioration and remaining life of UPS and other lead-acid batteries by giving a complete diagnosis via battery resistance testing. The specially designed L2020 Pin Type Lead further improves testing efficiency with an L-shaped tip that lets you reach deep into the battery racks to completely probe the terminals. 

Hioki portable battery testers support the maintenance of UPS and storage batteries critical to the life support of all businesses. The BT3554-51 battery internal resistance tester sets the standard for assessing the deterioration and remaining life of UPS and other lead-acid batteries by giving a complete diagnosis via battery resistance testing. The specially designed L2020 Pin Type Lead further improves testing efficiency with an L-shaped tip that lets you reach deep into the battery racks to completely probe the terminals.

Hioki portable battery testers support the maintenance of UPS and storage batteries critical to the life support of all businesses. The BT3554-51 battery internal resistance tester sets the standard for assessing the deterioration and remaining life of UPS and other lead-acid batteries by giving a complete diagnosis via battery resistance testing. The specially designed L2020 Pin Type Lead further improves testing efficiency with an L-shaped tip that lets you reach deep into the battery racks to completely probe the terminals.&nbsp;

Hioki BT3554-51 Battery Tester (with Cetm Traceable Calibration Report)

hioki bt3554-51 battery tester (with cetm traceable calibration report) penguji baterai (dengan laporan kalibrasi terlacak cetm) electrical power testing pengujian daya listrik bateri penentukuran boleh kesan ujian tenaga elektrik hioki/日木 电池测试仪（附 可追溯校准报告） 电力测试 日木

hioki-bt3554-51-battery-tester-with-cetm-traceable-calibration-report

Waterproof ExStik® II pH/Conductivity Meter

Note :   SINGPLAS does not do certificates for Ph Meters

Other 3rd Party Singapore only can do normal traceable calibration. Under 3rd party lab (Approximately 10 to 12 working days upon confirmation )

• Measures 5 parameters including Conductivity, TDS, Salinity, pH, and Temperature using one electrode

• 9 units of measure: pH, μS/cm, mS/cm, ppm, ppt, mg/L, g/L, °C, °F

• Memory stores up to 25 labeled readings

• Adjustable Conductivity to TDS ratio from 0.4 to 1.0; 0.5 fixed Salinity ratio

• RENEW feature alerts user when electrode needs replacement

• Auto power off and low battery indicator

• EC500 meter includes electrode, protective sensor cap, sample cup

with cap, four 3V CR-2032 batteries, and 48" (1.2m) neckstrap.

Order Conductivity standards and pH buffers separately

Waterproof ExStik® II pH/Conductivity MeterNote : SINGPLAS does not do certificates for Ph MetersOther 3rd Party Singapore only can do normal traceable calibration. Under 3rd party lab (Approximately 10 to 12 working days upon confirmation )Features:• Measures 5 parameters including Conductivity, TDS, Salinity, pH, and Temperature using one electrode• 9 units of measure: pH, μS/cm, mS/cm, ppm, ppt, mg/L, g/L, °C, °F• Analog bargraph indicates trends• Memory stores up to 25 labeled readings• Adjustable Conductivity to TDS ratio from 0.4 to 1.0; 0.5 fixed Salinity ratio• RENEW feature alerts user when electrode needs replacement• Auto power off and low battery indicator• Waterproof to IP57• EC500 meter includes electrode, protective sensor cap, sample cupwith cap, four 3V CR-2032 batteries, and 48&quot; (1.2m) neckstrap.Order Conductivity standards and pH buffers separately<figure class="md-block-image"><img src="https://storage.googleapis.com/eezee-product-images/qcX2jcIKPJODYgn41aenaf.jpg" alt="" /><figcaption class="md-block-image-caption"></figcaption></figure>

<ins>Waterproof ExStik® II pH/Conductivity Meter</ins>
<ins>Note : </ins> SINGPLAS does not do certificates for Ph Meters
Other 3rd Party Singapore only can do normal traceable calibration. Under 3rd party lab (Approximately 10 to 12 working days upon confirmation )
<ins>Features:</ins>
• Measures 5 parameters including Conductivity, TDS, Salinity, pH, and Temperature using one electrode
• 9 units of measure: pH, μS/cm, mS/cm, ppm, ppt, mg/L, g/L, °C, °F
• Analog bargraph indicates trends
• Memory stores up to 25 labeled readings
• Adjustable Conductivity to TDS ratio from 0.4 to 1.0; 0.5 fixed Salinity ratio
• RENEW feature alerts user when electrode needs replacement
• Auto power off and low battery indicator
• Waterproof to IP57
• <ins>EC500 meter</ins> includes electrode, protective sensor cap, sample cup
with cap, four 3V CR-2032 batteries, and 48" (1.2m) neckstrap.
Order Conductivity standards and pH buffers separately

 <div class="img-ctnr">
 <amp-img 
 on="tap:5m4as"
 tabindex="0"
 role="button"
 class="contain"
 layout="fill"
 src="https://storage.googleapis.com/eezee-product-images/qcX2jcIKPJODYgn41aenaf.jpg"
 ></amp-img>
 </div>
 
 <amp-image-lightbox 
 id="5m4as" 
 layout="nodisplay"></amp-image-lightbox>

Paul Ang

Others

Werner

STANLEY

MAKITA

BOSCH

Hitachi

KING'S

SHOWY

Hikoki

Other Tools

Other Construction

Ladders & Platforms

Grinders

Other Measuring Tools

Drills, Impact Drivers & Wrenches

Plumbing Tools & Equipment

Safety Shoes

Vehicle Accessories

Safety Gloves

PowerFit Industrial Pte Ltd

Exstik® Ii pH/Conductivity Meter - Waterproof

exstik® ii ph/conductivity meter waterproof pengukur ph/konduktivitas tahan air flow ph meters aliran extech kalis extech/艾克泰克 ph/电导率计 防水 流量和ph计 艾克泰克

exstik-ii-ph-conductivity-meter-waterproof

ExStik® II pH/Conductivity Meter - waterproof

ExStik® II pH/Conductivity Meter - waterproof with Calibration Certificate

Options

DC Gaussmeter Model GM1-ST
Manufactured in the USA by AlphaLab, Inc.
For magnets (or DC Solenoids) 0.1 - 20K Gauss

The Gaussmeter Model GM1-ST measures the field of even the strongest static magnet (to 20kG) down to fine resolution (0.1G). Features rapid turn-on and fast update. This model supersedes the MD1-ST, which had no auto-zero.

The Model 1-ST measures strength and polarity of magnetic fields up to 19,999.9 gauss. The sensor can easily fit in a .060 inch (1.5 mm) gap and is at the end of a 100 cm flexible cable. The sensor end can be bent if required for a variety of situations. Place the sensor on a magnet face to measure the field. With a resolution of 0.1 gauss, it can measure any tiny variation from magnet to a magnet or it can detect if a given magnet has lost even a little strength. Bend the sensor into an “L” to measure inside a DC solenoid tube. The 5 ½ digit display requires neither auto nor manual range change, making it easier to use than older style 3 ½ or 4 ½ digit meters. Turn on the meter and immediately begin reading fields (updates 4 times per second). There is no setup required, making this the fastest, easiest gauss meter available.

High dynamic range 5 ½ digit display reads even the strongest magnets with 0.1 gauss resolution, including polarity.

Turns on instantly, updated four times a second, no setup or initial calibration required.

Auto-Zero (subtracts the present field from subsequent readings); also a fine offset control.

Offset range is the full +/- 19,999.99 gauss.

1% accuracy at room temperature, including probe.

With rubber boot and hard carrying case is available.

Measures all permanent magnets. (Maximum field of magnets is about 15,000, which occurs only with rare-earth magnets in a gap configuration.)

High resolution of 0.1 gauss over the entire range of +19,999.9 to -19,999.9 gauss allows detection of any variation in the field from a magnet.

Measures inside DC Solenoids (probe is bent into “L” shape to measure this).

Sufficient resolution to map fields far from magnets.

Range/Resolution: 19,999.9 G/0.1 G; with polarity indicator

Accuracy: +/- 1% of reading (16° to 29°C); +/- 2% (-4° to 65°C)

Offset: Auto-Zero. Also fine offset (0.1 gauss resolution)

Probe (non-detachable): 1.5 (thick) x 4.3 x 24 mm

Meter Size: 5.2 x 3.6 x 1.6 inches; 132 x 91 x 41 mm

Battery: 9 volt alkaline (~ 40 hour life) / "Low Battery" indicator

<h1 class="md-block-header-one">DC Gaussmeter Model GM1-ST Manufactured in the USA by AlphaLab, Inc. For magnets (or DC Solenoids) 0.1 - 20K Gauss</h1>The Gaussmeter Model GM1-ST measures the field of even the strongest static magnet (to 20kG) down to fine resolution (0.1G). Features rapid turn-on and fast update. This model supersedes the MD1-ST, which had no auto-zero.Product Description:The Model 1-ST measures strength and polarity of magnetic fields up to 19,999.9 gauss. The sensor can easily fit in a .060 inch (1.5 mm) gap and is at the end of a 100 cm flexible cable. The sensor end can be bent if required for a variety of situations. Place the sensor on a magnet face to measure the field. With a resolution of 0.1 gauss, it can measure any tiny variation from magnet to a magnet or it can detect if a given magnet has lost even a little strength. Bend the sensor into an “L” to measure inside a DC solenoid tube. The 5 ½ digit display requires neither auto nor manual range change, making it easier to use than older style 3 ½ or 4 ½ digit meters. Turn on the meter and immediately begin reading fields (updates 4 times per second). There is no setup required, making this the fastest, easiest gauss meter available.Available Items:<ul class="md-block-unordered-list-item"><li>Detachable Rubber Boot (include)</li><li>Hard Carrying Case (include) </li><li>NIST Traceable Certificate (include)</li></ul>Features:<ul class="md-block-unordered-list-item"><li>High dynamic range 5 ½ digit display reads even the strongest magnets with 0.1 gauss resolution, including polarity.</li><li>Turns on instantly, updated four times a second, no setup or initial calibration required.</li><li>Auto-Zero (subtracts the present field from subsequent readings); also a fine offset control.</li><li>Offset range is the full +/- 19,999.99 gauss.</li><li>1% accuracy at room temperature, including probe.</li><li>Probe and battery included.</li><li>With rubber boot and hard carrying case is available.</li><li>CE Compliant.</li></ul>Applications:<ul class="md-block-unordered-list-item"><li>Measures all permanent magnets. (Maximum field of magnets is about 15,000, which occurs only with rare-earth magnets in a gap configuration.)</li><li>High resolution of 0.1 gauss over the entire range of +19,999.9 to -19,999.9 gauss allows detection of any variation in the field from a magnet.</li><li>Measures inside DC Solenoids (probe is bent into “L” shape to measure this).</li><li>Sufficient resolution to map fields far from magnets.</li></ul>Specifications:1-axis DC Gaussmeter GM1-ST<ul class="md-block-unordered-list-item"><li>Range/Resolution: 19,999.9 G/0.1 G; with polarity indicator</li><li>Accuracy: +/- 1% of reading (16° to 29°C); +/- 2% (-4° to 65°C)</li><li>Offset: Auto-Zero. Also fine offset (0.1 gauss resolution)</li><li>Probe (non-detachable): 1.5 (thick) x 4.3 x 24 mm</li><li>Meter Size: 5.2 x 3.6 x 1.6 inches; 132 x 91 x 41 mm</li><li>Weight: 8 oz</li><li>Battery: 9 volt alkaline (~ 40 hour life) / &quot;Low Battery&quot; indicator</li></ul>

<h1>DC Gaussmeter Model GM1-ST 
Manufactured in the USA by AlphaLab, Inc. 
For magnets (or DC Solenoids) 0.1 - 20K Gauss</h1>
The Gaussmeter Model GM1-ST measures the field of even the strongest static magnet (to 20kG) down to fine resolution (0.1G). Features rapid turn-on and fast update. This model supersedes the MD1-ST, which had no auto-zero.
Product Description:
The Model 1-ST measures strength and polarity of magnetic fields up to 19,999.9 gauss. The sensor can easily fit in a .060 inch (1.5 mm) gap and is at the end of a 100 cm flexible cable. The sensor end can be bent if required for a variety of situations. Place the sensor on a magnet face to measure the field. With a resolution of 0.1 gauss, it can measure any tiny variation from magnet to a magnet or it can detect if a given magnet has lost even a little strength. Bend the sensor into an “L” to measure inside a DC solenoid tube. The 5 ½ digit display requires neither auto nor manual range change, making it easier to use than older style 3 ½ or 4 ½ digit meters. Turn on the meter and immediately begin reading fields (updates 4 times per second). There is no setup required, making this the fastest, easiest gauss meter available.
Available Items:
<ul>
<li>Detachable Rubber Boot (include)</li>
<li>Hard Carrying Case (include) </li>
<li>NIST Traceable Certificate (include)</li>
</ul>
Features:
<ul>
<li>High dynamic range 5 ½ digit display reads even the strongest magnets with 0.1 gauss resolution, including polarity.</li>
<li>Turns on instantly, updated four times a second, no setup or initial calibration required.</li>
<li>Auto-Zero (subtracts the present field from subsequent readings); also a fine offset control.</li>
<li>Offset range is the full +/- 19,999.99 gauss.</li>
<li>1% accuracy at room temperature, including probe.</li>
<li>Probe and battery included.</li>
<li>With rubber boot and hard carrying case is available.</li>
<li>CE Compliant.</li>
</ul>
Applications:
<ul>
<li>Measures all permanent magnets. (Maximum field of magnets is about 15,000, which occurs only with rare-earth magnets in a gap configuration.)</li>
<li>High resolution of 0.1 gauss over the entire range of +19,999.9 to -19,999.9 gauss allows detection of any variation in the field from a magnet.</li>
<li>Measures inside DC Solenoids (probe is bent into “L” shape to measure this).</li>
<li>Sufficient resolution to map fields far from magnets.</li>
</ul>
Specifications:
1-axis DC Gaussmeter GM1-ST
<ul>
<li>Range/Resolution: 19,999.9 G/0.1 G; with polarity indicator</li>
<li>Accuracy: +/- 1% of reading (16° to 29°C); +/- 2% (-4° to 65°C)</li>
<li>Offset: Auto-Zero. Also fine offset (0.1 gauss resolution)</li>
<li>Probe (non-detachable): 1.5 (thick) x 4.3 x 24 mm</li>
<li>Meter Size: 5.2 x 3.6 x 1.6 inches; 132 x 91 x 41 mm</li>
<li>Weight: 8 oz</li>
<li>Battery: 9 volt alkaline (~ 40 hour life) / "Low Battery" indicator</li>
</ul>

YK Yeo

Trifield GM1-ST Dc Gauss Meter With Boot and Carrying Case

trifield gm1-st dc gauss meter boot carrying case dengan dan tas emf frequency meters pengukur frekuensi oem oem/oem代工 gm1-st直流高斯计，带保护套和手提箱 emf和频率计 oem代工

trifield-gm1-st-dc-gauss-meter-with-boot-and-carrying-case

VOGEL Digital Multimeter with durable housing. Backlit LED lamp and non-contact voltage tracing allows for easy use. Comes with inspection certificate, probes and carrying case.

Measuring range AC/DC: 0 - 400 V
Resistance: 2 MΩ
Overload protection: CAT III / 300 V
Dimension: 140 mm x 70 mm x 35 mm

VOGEL Digital Multimeter with durable housing. Backlit LED lamp and non-contact voltage tracing allows for easy use. Comes with inspection certificate, probes and carrying case.Measuring range AC/DC: 0 - 400 V Resistance: 2 MΩ Overload protection: CAT III / 300 V Dimension: 140 mm x 70 mm x 35 mm

VOGEL Digital Multimeter with durable housing. Backlit LED lamp and non-contact voltage tracing allows for easy use. Comes with inspection certificate, probes and carrying case.
Measuring range AC/DC: 0 - 400 V 
Resistance: 2 MΩ 
Overload protection: CAT III / 300 V 
Dimension: 140 mm x 70 mm x 35 mm