Extech

FLUKE

Test & Measurement

test-measurement

EMF & Frequency Meters

emf-frequency-meters

Flow & PH Meters

flow-ph-meters

Services

services

Traceable Calibration Services

traceable-calibration-services

Matthew Lee

buyerIntroduction

Cetm 350 Traceable Calibration by Cetm for FLUKE-435 Three Phase Power Quality and Energy Analyzer

cetm 350 traceable calibration fluke-435 three phase power quality energy analyzer kalibrasi terlacak oleh untuk penganalisis kualitas daya dan energi tiga fase services fluke penentukuran boleh kesan kualiti kuasa fasa tenaga 可溯源校准，适用于 fluke/福禄克 -435 三相电能质量和能量分析仪 福禄克

cetm-350-traceable-calibration-by-cetm-for-fluke-435-three-phase-power-quality-and-energy-analyzer

Waterproof ExStik® II pH/Conductivity Meter

Note :   SINGPLAS does not do certificates for Ph Meters

Other 3rd Party Singapore only can do normal traceable calibration. Under 3rd party lab (Approximately 10 to 12 working days upon confirmation )

• Measures 5 parameters including Conductivity, TDS, Salinity, pH, and Temperature using one electrode

• 9 units of measure: pH, μS/cm, mS/cm, ppm, ppt, mg/L, g/L, °C, °F

• Memory stores up to 25 labeled readings

• Adjustable Conductivity to TDS ratio from 0.4 to 1.0; 0.5 fixed Salinity ratio

• RENEW feature alerts user when electrode needs replacement

• Auto power off and low battery indicator

• EC500 meter includes electrode, protective sensor cap, sample cup

with cap, four 3V CR-2032 batteries, and 48" (1.2m) neckstrap.

Order Conductivity standards and pH buffers separately

Waterproof ExStik® II pH/Conductivity MeterNote : SINGPLAS does not do certificates for Ph MetersOther 3rd Party Singapore only can do normal traceable calibration. Under 3rd party lab (Approximately 10 to 12 working days upon confirmation )Features:• Measures 5 parameters including Conductivity, TDS, Salinity, pH, and Temperature using one electrode• 9 units of measure: pH, μS/cm, mS/cm, ppm, ppt, mg/L, g/L, °C, °F• Analog bargraph indicates trends• Memory stores up to 25 labeled readings• Adjustable Conductivity to TDS ratio from 0.4 to 1.0; 0.5 fixed Salinity ratio• RENEW feature alerts user when electrode needs replacement• Auto power off and low battery indicator• Waterproof to IP57• EC500 meter includes electrode, protective sensor cap, sample cupwith cap, four 3V CR-2032 batteries, and 48&quot; (1.2m) neckstrap.Order Conductivity standards and pH buffers separately<figure class="md-block-image"><img src="https://storage.googleapis.com/eezee-product-images/qcX2jcIKPJODYgn41aenaf.jpg" alt="" /><figcaption class="md-block-image-caption"></figcaption></figure>

<ins>Waterproof ExStik® II pH/Conductivity Meter</ins>
<ins>Note : </ins> SINGPLAS does not do certificates for Ph Meters
Other 3rd Party Singapore only can do normal traceable calibration. Under 3rd party lab (Approximately 10 to 12 working days upon confirmation )
<ins>Features:</ins>
• Measures 5 parameters including Conductivity, TDS, Salinity, pH, and Temperature using one electrode
• 9 units of measure: pH, μS/cm, mS/cm, ppm, ppt, mg/L, g/L, °C, °F
• Analog bargraph indicates trends
• Memory stores up to 25 labeled readings
• Adjustable Conductivity to TDS ratio from 0.4 to 1.0; 0.5 fixed Salinity ratio
• RENEW feature alerts user when electrode needs replacement
• Auto power off and low battery indicator
• Waterproof to IP57
• <ins>EC500 meter</ins> includes electrode, protective sensor cap, sample cup
with cap, four 3V CR-2032 batteries, and 48" (1.2m) neckstrap.
Order Conductivity standards and pH buffers separately

 <div class="img-ctnr">
 <amp-img 
 on="tap:5m4as"
 tabindex="0"
 role="button"
 class="contain"
 layout="fill"
 src="https://storage.googleapis.com/eezee-product-images/qcX2jcIKPJODYgn41aenaf.jpg"
 ></amp-img>
 </div>
 
 <amp-image-lightbox 
 id="5m4as" 
 layout="nodisplay"></amp-image-lightbox>

Paul Ang

Others

Werner

STANLEY

MAKITA

BOSCH

Hitachi

KING'S

SHOWY

Hikoki

Other Tools

Other Construction

Ladders & Platforms

Grinders

Other Measuring Tools

Drills, Impact Drivers & Wrenches

Plumbing Tools & Equipment

Safety Shoes

Vehicle Accessories

Safety Gloves

PowerFit Industrial Pte Ltd

Exstik® Ii pH/Conductivity Meter - Waterproof

exstik® ii ph/conductivity meter waterproof pengukur ph/konduktivitas tahan air flow ph meters aliran extech kalis extech/艾克泰克 ph/电导率计 防水 流量和ph计 艾克泰克

exstik-ii-ph-conductivity-meter-waterproof

ExStik® II pH/Conductivity Meter - waterproof

ExStik® II pH/Conductivity Meter - waterproof with Calibration Certificate

Options

DC Gaussmeter Model GM1-ST
Manufactured in the USA by AlphaLab, Inc.
For magnets (or DC Solenoids) 0.1 - 20K Gauss

The Gaussmeter Model GM1-ST measures the field of even the strongest static magnet (to 20kG) down to fine resolution (0.1G). Features rapid turn-on and fast update. This model supersedes the MD1-ST, which had no auto-zero.

The Model 1-ST measures strength and polarity of magnetic fields up to 19,999.9 gauss. The sensor can easily fit in a .060 inch (1.5 mm) gap and is at the end of a 100 cm flexible cable. The sensor end can be bent if required for a variety of situations. Place the sensor on a magnet face to measure the field. With a resolution of 0.1 gauss, it can measure any tiny variation from magnet to a magnet or it can detect if a given magnet has lost even a little strength. Bend the sensor into an “L” to measure inside a DC solenoid tube. The 5 ½ digit display requires neither auto nor manual range change, making it easier to use than older style 3 ½ or 4 ½ digit meters. Turn on the meter and immediately begin reading fields (updates 4 times per second). There is no setup required, making this the fastest, easiest gauss meter available.

High dynamic range 5 ½ digit display reads even the strongest magnets with 0.1 gauss resolution, including polarity.

Turns on instantly, updated four times a second, no setup or initial calibration required.

Auto-Zero (subtracts the present field from subsequent readings); also a fine offset control.

Offset range is the full +/- 19,999.99 gauss.

1% accuracy at room temperature, including probe.

With rubber boot and hard carrying case is available.

Measures all permanent magnets. (Maximum field of magnets is about 15,000, which occurs only with rare-earth magnets in a gap configuration.)

High resolution of 0.1 gauss over the entire range of +19,999.9 to -19,999.9 gauss allows detection of any variation in the field from a magnet.

Measures inside DC Solenoids (probe is bent into “L” shape to measure this).

Sufficient resolution to map fields far from magnets.

Range/Resolution: 19,999.9 G/0.1 G; with polarity indicator

Accuracy: +/- 1% of reading (16° to 29°C); +/- 2% (-4° to 65°C)

Offset: Auto-Zero. Also fine offset (0.1 gauss resolution)

Probe (non-detachable): 1.5 (thick) x 4.3 x 24 mm

Meter Size: 5.2 x 3.6 x 1.6 inches; 132 x 91 x 41 mm

Battery: 9 volt alkaline (~ 40 hour life) / "Low Battery" indicator

<h1 class="md-block-header-one">DC Gaussmeter Model GM1-ST Manufactured in the USA by AlphaLab, Inc. For magnets (or DC Solenoids) 0.1 - 20K Gauss</h1>The Gaussmeter Model GM1-ST measures the field of even the strongest static magnet (to 20kG) down to fine resolution (0.1G). Features rapid turn-on and fast update. This model supersedes the MD1-ST, which had no auto-zero.Product Description:The Model 1-ST measures strength and polarity of magnetic fields up to 19,999.9 gauss. The sensor can easily fit in a .060 inch (1.5 mm) gap and is at the end of a 100 cm flexible cable. The sensor end can be bent if required for a variety of situations. Place the sensor on a magnet face to measure the field. With a resolution of 0.1 gauss, it can measure any tiny variation from magnet to a magnet or it can detect if a given magnet has lost even a little strength. Bend the sensor into an “L” to measure inside a DC solenoid tube. The 5 ½ digit display requires neither auto nor manual range change, making it easier to use than older style 3 ½ or 4 ½ digit meters. Turn on the meter and immediately begin reading fields (updates 4 times per second). There is no setup required, making this the fastest, easiest gauss meter available.Available Items:<ul class="md-block-unordered-list-item"><li>Detachable Rubber Boot (include)</li><li>Hard Carrying Case (include) </li><li>NIST Traceable Certificate (include)</li></ul>Features:<ul class="md-block-unordered-list-item"><li>High dynamic range 5 ½ digit display reads even the strongest magnets with 0.1 gauss resolution, including polarity.</li><li>Turns on instantly, updated four times a second, no setup or initial calibration required.</li><li>Auto-Zero (subtracts the present field from subsequent readings); also a fine offset control.</li><li>Offset range is the full +/- 19,999.99 gauss.</li><li>1% accuracy at room temperature, including probe.</li><li>Probe and battery included.</li><li>With rubber boot and hard carrying case is available.</li><li>CE Compliant.</li></ul>Applications:<ul class="md-block-unordered-list-item"><li>Measures all permanent magnets. (Maximum field of magnets is about 15,000, which occurs only with rare-earth magnets in a gap configuration.)</li><li>High resolution of 0.1 gauss over the entire range of +19,999.9 to -19,999.9 gauss allows detection of any variation in the field from a magnet.</li><li>Measures inside DC Solenoids (probe is bent into “L” shape to measure this).</li><li>Sufficient resolution to map fields far from magnets.</li></ul>Specifications:1-axis DC Gaussmeter GM1-ST<ul class="md-block-unordered-list-item"><li>Range/Resolution: 19,999.9 G/0.1 G; with polarity indicator</li><li>Accuracy: +/- 1% of reading (16° to 29°C); +/- 2% (-4° to 65°C)</li><li>Offset: Auto-Zero. Also fine offset (0.1 gauss resolution)</li><li>Probe (non-detachable): 1.5 (thick) x 4.3 x 24 mm</li><li>Meter Size: 5.2 x 3.6 x 1.6 inches; 132 x 91 x 41 mm</li><li>Weight: 8 oz</li><li>Battery: 9 volt alkaline (~ 40 hour life) / &quot;Low Battery&quot; indicator</li></ul>

<h1>DC Gaussmeter Model GM1-ST 
Manufactured in the USA by AlphaLab, Inc. 
For magnets (or DC Solenoids) 0.1 - 20K Gauss</h1>
The Gaussmeter Model GM1-ST measures the field of even the strongest static magnet (to 20kG) down to fine resolution (0.1G). Features rapid turn-on and fast update. This model supersedes the MD1-ST, which had no auto-zero.
Product Description:
The Model 1-ST measures strength and polarity of magnetic fields up to 19,999.9 gauss. The sensor can easily fit in a .060 inch (1.5 mm) gap and is at the end of a 100 cm flexible cable. The sensor end can be bent if required for a variety of situations. Place the sensor on a magnet face to measure the field. With a resolution of 0.1 gauss, it can measure any tiny variation from magnet to a magnet or it can detect if a given magnet has lost even a little strength. Bend the sensor into an “L” to measure inside a DC solenoid tube. The 5 ½ digit display requires neither auto nor manual range change, making it easier to use than older style 3 ½ or 4 ½ digit meters. Turn on the meter and immediately begin reading fields (updates 4 times per second). There is no setup required, making this the fastest, easiest gauss meter available.
Available Items:
<ul>
<li>Detachable Rubber Boot (include)</li>
<li>Hard Carrying Case (include) </li>
<li>NIST Traceable Certificate (include)</li>
</ul>
Features:
<ul>
<li>High dynamic range 5 ½ digit display reads even the strongest magnets with 0.1 gauss resolution, including polarity.</li>
<li>Turns on instantly, updated four times a second, no setup or initial calibration required.</li>
<li>Auto-Zero (subtracts the present field from subsequent readings); also a fine offset control.</li>
<li>Offset range is the full +/- 19,999.99 gauss.</li>
<li>1% accuracy at room temperature, including probe.</li>
<li>Probe and battery included.</li>
<li>With rubber boot and hard carrying case is available.</li>
<li>CE Compliant.</li>
</ul>
Applications:
<ul>
<li>Measures all permanent magnets. (Maximum field of magnets is about 15,000, which occurs only with rare-earth magnets in a gap configuration.)</li>
<li>High resolution of 0.1 gauss over the entire range of +19,999.9 to -19,999.9 gauss allows detection of any variation in the field from a magnet.</li>
<li>Measures inside DC Solenoids (probe is bent into “L” shape to measure this).</li>
<li>Sufficient resolution to map fields far from magnets.</li>
</ul>
Specifications:
1-axis DC Gaussmeter GM1-ST
<ul>
<li>Range/Resolution: 19,999.9 G/0.1 G; with polarity indicator</li>
<li>Accuracy: +/- 1% of reading (16° to 29°C); +/- 2% (-4° to 65°C)</li>
<li>Offset: Auto-Zero. Also fine offset (0.1 gauss resolution)</li>
<li>Probe (non-detachable): 1.5 (thick) x 4.3 x 24 mm</li>
<li>Meter Size: 5.2 x 3.6 x 1.6 inches; 132 x 91 x 41 mm</li>
<li>Weight: 8 oz</li>
<li>Battery: 9 volt alkaline (~ 40 hour life) / "Low Battery" indicator</li>
</ul>

YK Yeo

Trifield GM1-ST Dc Gauss Meter With Boot and Carrying Case

trifield gm1-st dc gauss meter boot carrying case dengan dan tas emf frequency meters pengukur frekuensi oem oem/oem代工 gm1-st直流高斯计，带保护套和手提箱 emf和频率计 oem代工