FLUKE

RS Pro

TRIPLETT

Test & Measurement

test-measurement

Clamp Meters

clamp-meters

Crocodile Clips

crocodile-clips

Electrical Power Testing

electrical-power-testing

Multimeter Leads

multimeter-leads

Pressure Measurement

pressure-measurement

Fluke TL75-1 Test Lead Kit, Cat Iii, Cat Iv, 10A

Safety Category	CAT III 1000 V, CAT IV 600V

• Both test leads and probes available
• Durable connection, which guarantees excellent results
• Single accessories and kits
• Different safety categories to suit the application
• Insulated wires

These leads are connecting cables which are used specifically for Multimeters, attaching a test probe to the end will allow the user to measure the required voltage, current or electrical resistance. As it assists operation with a multimeter, at least two of these types of electrical values are measured.

Connecting to Fluke multimeters, a set of test probes will measure the device or target for an accurate reading, such as voltage or current. Due to the flexibility and quality produced by Fluke, each probe provides much-needed precision.

FLUKE Multimeter Leads, PVC Insulation Type, 1.22m Lead Length - TL75-1

Need to connect a high-precision probe to your multimeter? Count on this test lead kit from FLUKE. With a sturdy 4mm plug on one end and a PVC-insulated probe on the other, it's an all-in-one measurement solution that saves time and effort in the field. Because it's rated for CAT III, it's a safe choice for general-purpose measurements in a heavy-industrial environment. A right-angled connector reduces strain to help keep this hardy gadget running at peak condition for longer. Thanks to its standard banana plug design, it's widely compatible with your existing devices for ease of use.

• PVC insulator is abrasion-resistant for a long service life
• Generous 1.22m cable length gives you plenty of room to manoeuvre
• Comfort-grip probe handle makes it easy to use
• Shrouded plugs minimise the chances of accidental contact for maximum user safety

• Electrical installations
• Industrial circuit breakers
• Distribution wiring 

<h3 class="md-block-header-three">Fluke TL75-1 Test Lead Kit, Cat Iii, Cat Iv, 10A</h3><ul class="md-block-unordered-list-item"><li> Lead Type	Test Lead Kit</li><li>Connector Type	Banana Plug</li><li>Lead Length	1.22m</li><li>Current Rating	10A</li><li>Safety Category Voltage	1000 V, 600V</li><li>Safety Category	CAT III 1000 V, CAT IV 600V</li><li>Safety Category Level	CAT III, CAT IV</li></ul>Features and Benefits• Both test leads and probes available • Durable connection, which guarantees excellent results • Single accessories and kits • Different safety categories to suit the application • Insulated wiresWhat are test leads?These leads are connecting cables which are used specifically for Multimeters, attaching a test probe to the end will allow the user to measure the required voltage, current or electrical resistance. As it assists operation with a multimeter, at least two of these types of electrical values are measured.What are test probes?Connecting to Fluke multimeters, a set of test probes will measure the device or target for an accurate reading, such as voltage or current. Due to the flexibility and quality produced by Fluke, each probe provides much-needed precision.FLUKE Multimeter Leads, PVC Insulation Type, 1.22m Lead Length - TL75-1Need to connect a high-precision probe to your multimeter? Count on this test lead kit from FLUKE. With a sturdy 4mm plug on one end and a PVC-insulated probe on the other, it&#x27;s an all-in-one measurement solution that saves time and effort in the field. Because it&#x27;s rated for CAT III, it&#x27;s a safe choice for general-purpose measurements in a heavy-industrial environment. A right-angled connector reduces strain to help keep this hardy gadget running at peak condition for longer. Thanks to its standard banana plug design, it&#x27;s widely compatible with your existing devices for ease of use.Features &amp; Benefits• PVC insulator is abrasion-resistant for a long service life • Generous 1.22m cable length gives you plenty of room to manoeuvre • Comfort-grip probe handle makes it easy to use • Shrouded plugs minimise the chances of accidental contact for maximum user safetyApplications• Electrical installations • Industrial circuit breakers • Distribution wiring

<h3>Fluke TL75-1 Test Lead Kit, Cat Iii, Cat Iv, 10A</h3>
<ul>
<li>&nbsp;Lead Type	Test Lead Kit</li>
<li>Connector Type	Banana Plug</li>
<li>Lead Length	1.22m</li>
<li>Current Rating	10A</li>
<li>Safety Category Voltage	1000 V, 600V</li>
<li>Safety Category	CAT III 1000 V, CAT IV 600V</li>
<li>Safety Category Level	CAT III, CAT IV</li>
</ul>
Features and Benefits
• Both test leads and probes available 
• Durable connection, which guarantees excellent results 
• Single accessories and kits 
• Different safety categories to suit the application 
• Insulated wires
What are test leads?
These leads are connecting cables which are used specifically for Multimeters, attaching a test probe to the end will allow the user to measure the required voltage, current or electrical resistance. As it assists operation with a multimeter, at least two of these types of electrical values are measured.
What are test probes?
Connecting to Fluke multimeters, a set of test probes will measure the device or target for an accurate reading, such as voltage or current. Due to the flexibility and quality produced by Fluke, each probe provides much-needed precision.
FLUKE Multimeter Leads, PVC Insulation Type, 1.22m Lead Length - TL75-1
Need to connect a high-precision probe to your multimeter? Count on this test lead kit from FLUKE. With a sturdy 4mm plug on one end and a PVC-insulated probe on the other, it's an all-in-one measurement solution that saves time and effort in the field. Because it's rated for CAT III, it's a safe choice for general-purpose measurements in a heavy-industrial environment. A right-angled connector reduces strain to help keep this hardy gadget running at peak condition for longer. Thanks to its standard banana plug design, it's widely compatible with your existing devices for ease of use.
Features &amp; Benefits
• PVC insulator is abrasion-resistant for a long service life 
• Generous 1.22m cable length gives you plenty of room to manoeuvre 
• Comfort-grip probe handle makes it easy to use 
• Shrouded plugs minimise the chances of accidental contact for maximum user safety
Applications
• Electrical installations 
• Industrial circuit breakers 
• Distribution wiring&nbsp;

TL75 PVC insul hard point test lead set

SCHNEIDER ELECTRIC

Fluke Networks

Abus

Screw

O Ring

Surface Mount Resistors

Circular Connectors

Contactors

Bolts

Panel Mount Indicators 

Molded Case Circuit Breakers - MCCBs

Junction & Enclosure Box

Electrical Wire 

RS Components ETH SG

buyerIntroduction

fluke tl75-1 test lead kit, cat iii, iv, 10a kit kabel uji tl75-1, electrical power testing pengujian daya listrik plumbum ujian tenaga elektrik fluke/福禄克 测试引线套件，cat iii、cat iv，10a 电力测试 福禄克

fluke-tl75-1-test-lead-kit-cat-iii-cat-iv-10a

The Fluke TL75 Hard Point™ Test Leads are a set of comfort grip, PVC-insulated probes. TL75s offer the convenience of a test lead and probe together in one unit with a variety of connections. This set of test leads are recommended for all general-purpose measurements and are compatible with a wide range of Fluke meters and tools.  

CAT IV 600 V, CAT III 1000 V rated with protective cap

The Fluke TL75 Hard Point™ Test Lead Set is CAT II 1000 V, 10 A rated. When the protective caps are placed on the leads, the ratings jump up to CAT IV 600 V, CAT III 1000 V.

Expand your measurement capabilities with special adapters to your TL75 set. Add alligator clips or adapters to accomplish even more:

<h3 class="md-block-header-three">Fluke TL75 Hard Point Test Lead Set</h3>The Fluke TL75 Hard Point™ Test Leads are a set of comfort grip, PVC-insulated probes. TL75s offer the convenience of a test lead and probe together in one unit with a variety of connections. This set of test leads are recommended for all general-purpose measurements and are compatible with a wide range of Fluke meters and tools. <ul class="md-block-unordered-list-item"><li>Test lead and probe in one unit</li><li>48 inches (1.22 meter) long</li><li>CAT II 1000 V, 10 A rated</li><li>CAT IV 600 V, CAT III 1000 V rated with protective cap</li><li>CSA Listed</li></ul><h3 class="md-block-header-three">Designed for safety</h3>The Fluke TL75 Hard Point™ Test Lead Set is CAT II 1000 V, 10 A rated. When the protective caps are placed on the leads, the ratings jump up to CAT IV 600 V, CAT III 1000 V.<h3 class="md-block-header-three">Compatible with Fluke alligator clips</h3>Expand your measurement capabilities with special adapters to your TL75 set. Add alligator clips or adapters to accomplish even more:<ul class="md-block-unordered-list-item"><li>Fluke AC175 Alligator Clip Set</li><li>TP920 Test Probe Adapter Set</li></ul>

<h3>Fluke TL75 Hard Point Test Lead Set</h3>
The Fluke TL75 Hard Point™ Test Leads are a set of comfort grip, PVC-insulated probes. TL75s offer the convenience of a test lead and probe together in one unit with a variety of connections. This set of test leads are recommended for all general-purpose measurements and are compatible with a wide range of Fluke meters and tools.&nbsp;&nbsp;
<ul>
<li>Test lead and probe in one unit</li>
<li>48 inches (1.22 meter) long</li>
<li>CAT II 1000 V, 10 A rated</li>
<li>CAT IV 600 V, CAT III 1000 V rated with protective cap</li>
<li>CSA Listed</li>
</ul>
<h3>Designed for safety</h3>
The Fluke TL75 Hard Point™ Test Lead Set is CAT II 1000 V, 10 A rated. When the protective caps are placed on the leads, the ratings jump up to CAT IV 600 V, CAT III 1000 V.
<h3>Compatible with Fluke alligator clips</h3>
Expand your measurement capabilities with special adapters to your TL75 set. Add alligator clips or adapters to accomplish even more:
<ul>
<li>Fluke AC175 Alligator Clip Set</li>
<li>TP920 Test Probe Adapter Set</li>
</ul>

Ratings

Exposed probe tip length

Environmental ratings

Extech

ACISION

Center

PCE Instruments

MEGGER

AMPROBE

Multimeters

Other Measuring Tools

Industrial Thermometer

Sound & Vibration Meters

Thermal Imaging Cameras

Humidity & Temperature

CETM

Fluke TL75 Hard Point Test Lead Set

fluke tl75 hard point test lead set timbal uji titik keras multimeter leads plumbum ujian fluke/福禄克 硬点测试导线组 福禄克

fluke-tl75-hard-point-test-lead-set

RS Pro Datasheet

Siemens

STANLEY

DEUTSCH

Facom

RAPID

ECLIPSE TOOLS

Plugs & Connector 

Button Switch

Aluminium Capacitors

Rs Pro 4233147, Cat Iii, 10A

rs pro 4233147, cat iii, 10a multimeter leads 4233147，cat iii，10a rs专业版

rs-pro-4233147-cat-iii-10a

The Fluke 302+ is a compact, easy-to-use digital clamp meter made to fit the way you work. It is the perfect first-pass troubleshooting tool: small enough to fit in a work bag, tough enough to withstand daily use, and extremely simple to use. All without compromising safety. For everyday applications, where True-RMS accuracy isn’t needed, the Fluke 302+ delivers reliable measurements time after time. 

AC current measurements up to 400 A, handling your everyday electrical maintenance needs

Comes with the TL75 Hard Point™ Test Lead Set offering the convenience of a test lead and probe in one unit with avariety of connections

Rugged, easy-to-use digital clamp meter with CAT IV 300 V/CAT III 600 V safety rating

The Fluke 302+ CAT III Digital Clamp Meter is more compact, making the use of clamp-type ammeter more flexible and simpler

Comes with Fluke TL75 Hard Point™ Test Lead Set One pair (red, black) of comfort grip probes
48 inches (1.22 meter) PVC insulated test leads with right-angle shrouded banana plugs
Recommended for general purpose measurements
CAT II 1000 V, 10 A rating
CAT IV 600 V, CAT III 1000 V only with protective cap

<h3 class="md-block-header-three"> Fluke 302+ CAT III Digital Clamp Meter</h3>The Fluke 302+ is a compact, easy-to-use digital clamp meter made to fit the way you work. It is the perfect first-pass troubleshooting tool: small enough to fit in a work bag, tough enough to withstand daily use, and extremely simple to use. All without compromising safety. For everyday applications, where True-RMS accuracy isn’t needed, the Fluke 302+ delivers reliable measurements time after time. <ul class="md-block-unordered-list-item"><li>AC current measurements up to 400 A, handling your everyday electrical maintenance needs</li><li>Comes with the TL75 Hard Point™ Test Lead Set offering the convenience of a test lead and probe in one unit with avariety of connections</li><li>Rugged, easy-to-use digital clamp meter with CAT IV 300 V/CAT III 600 V safety rating</li></ul>Product Description <ul class="md-block-unordered-list-item"><li>The Fluke 302+ CAT III Digital Clamp Meter is more compact, making the use of clamp-type ammeter more flexible and simpler</li><li>Measure AC current up to 400A</li><li>30 mm large jaw</li><li>High accuracy of 1.8%</li><li>Backlit display</li><li>Two-year warranty</li><li>Comes with Fluke TL75 Hard Point™ Test Lead Set One pair (red, black) of comfort grip probes 48 inches (1.22 meter) PVC insulated test leads with right-angle shrouded banana plugs Recommended for general purpose measurements CAT II 1000 V, 10 A rating CAT IV 600 V, CAT III 1000 V only with protective cap</li></ul>

<h3> Fluke 302+ CAT III Digital Clamp Meter</h3>
The Fluke 302+ is a compact, easy-to-use digital clamp meter made to fit the way you work. It is the perfect first-pass troubleshooting tool: small enough to fit in a work bag, tough enough to withstand daily use, and extremely simple to use. All without compromising safety. For everyday applications, where True-RMS accuracy isn’t needed, the Fluke 302+ delivers reliable measurements time after time.&nbsp;
<ul>
<li>AC current measurements up to 400 A, handling your everyday electrical maintenance needs</li>
<li>Comes with the TL75 Hard Point™ Test Lead Set offering the convenience of a test lead and probe in one unit with avariety of connections</li>
<li>Rugged, easy-to-use digital clamp meter with CAT IV 300 V/CAT III 600 V safety rating</li>
</ul>
Product Description&nbsp;
<ul>
<li>The Fluke 302+ CAT III Digital Clamp Meter is more compact, making the use of clamp-type ammeter more flexible and simpler</li>
<li>Measure AC current up to 400A</li>
<li>30 mm large jaw</li>
<li>High accuracy of 1.8%</li>
<li>Backlit display</li>
<li>Two-year warranty</li>
<li>Comes with Fluke TL75 Hard Point™ Test Lead Set One pair (red, black) of comfort grip probes 
48 inches (1.22 meter) PVC insulated test leads with right-angle shrouded banana plugs 
Recommended for general purpose measurements 
CAT II 1000 V, 10 A rating 
CAT IV 600 V, CAT III 1000 V only with protective cap</li>
</ul>

Fluke 302+ Cat Iii Digital Clamp Meter

fluke 302+ cat iii digital clamp meter alat ukur klem meters pengapit fluke/福禄克 数字钳形表 福禄克

fluke-302-cat-iii-digital-clamp-meter

Triplett TL005 Alligator Clips: Fits Most Major Brand Digital Multimeters

Universal design fits virtually all major brand digital multimeters and test instruments. They include insulated screw-on alligator clips. 

Universal design fits virtually all major brand digital multimeters and test instruments

<h3 class="md-block-header-three">Triplett TL005 Alligator Clips: Fits Most Major Brand Digital Multimeters</h3>Universal design fits virtually all major brand digital multimeters and test instruments. They include insulated screw-on alligator clips. <ul class="md-block-unordered-list-item"><li>Universal design fits virtually all major brand digital multimeters and test instruments</li><li>55” long</li><li>10A max current</li><li>CAT III 1000V safety category</li></ul>

<h3>Triplett TL005 Alligator Clips: Fits Most Major Brand Digital Multimeters</h3>
Universal design fits virtually all major brand digital multimeters and test instruments. They include insulated screw-on alligator clips.&nbsp;
<ul>
<li>Universal design fits virtually all major brand digital multimeters and test instruments</li>
<li>55” long</li>
<li>10A max current</li>
<li>CAT III 1000V safety category</li>
</ul>

triplett tl005 alligator clips: fits major brand digital multimeters klip buaya tl005: cocok untuk sebagian besar multimeter merek utama leads sesuai dengan kebanyakan jenama triplett/三胞胎 鳄鱼夹：适合大多数主流品牌数字万用表 三胞胎

triplett-tl005-alligator-clips-fits-most-major-brand-digital-multimeters

FLUKE 717 300G -850mbar to 20.68bar Pressure Calibrator

For measuring overpressure and vacuum with an internal sensor

Suitable for non-corrosive gases and liquids

Select from numerous technical units for the pressure

Simultaneous measurement of pressure and current for simple P/I or I/P testing

Zero, min. / max., hold and damp functions

Test functions for push button switches: adjusting, resetting, dead zone

CSA C22.2 no. 1010.1: 1992, IEC 61010, CAT I 30V

Fluke 717, holster, TL75 test leads, AC72 crocodile clips, 9 V battery, instruction manual 

<h3 class="md-block-header-three">FLUKE 717 300G -850mbar to 20.68bar Pressure Calibrator</h3><ul class="md-block-unordered-list-item"><li> Maximum Pressure Measurement	20.68bar</li><li>Minimum Pressure Measurement	-850mbar</li><li>Resolution	1 mbar</li><li>Model Number p	717</li><li>Current Loop Measurement	Yes</li><li>Maximum Operating Temperature	+55°C</li><li>Minimum Operating Temperature	-10°C</li><li>Weight	600g</li><li>Dimensions	201 x 98 x 52mm</li><li>Height	52mm</li><li>Length	201mm</li><li>Width	98mm</li></ul>Features and Benefits:For measuring overpressure and vacuum with an internal sensorSuitable for non-corrosive gases and liquidsSelect from numerous technical units for the pressureSimultaneous measurement of pressure and current for simple P/I or I/P testing24 V loop supplyZero, min. / max., hold and damp functionsTest functions for push button switches: adjusting, resetting, dead zoneStandardsCSA C22.2 no. 1010.1: 1992, IEC 61010, CAT I 30VSupplied withFluke 717, holster, TL75 test leads, AC72 crocodile clips, 9 V battery, instruction manual

<h3>FLUKE 717 300G -850mbar to 20.68bar Pressure Calibrator</h3>
<ul>
<li>&nbsp;Maximum Pressure Measurement	20.68bar</li>
<li>Minimum Pressure Measurement	-850mbar</li>
<li>Resolution	1 mbar</li>
<li>Model Number p	717</li>
<li>Current Loop Measurement	Yes</li>
<li>Maximum Operating Temperature	+55°C</li>
<li>Minimum Operating Temperature	-10°C</li>
<li>Weight	600g</li>
<li>Dimensions	201 x 98 x 52mm</li>
<li>Height	52mm</li>
<li>Length	201mm</li>
<li>Width	98mm</li>
</ul>
Features and Benefits:
For measuring overpressure and vacuum with an internal sensor
Suitable for non-corrosive gases and liquids
Select from numerous technical units for the pressure
Simultaneous measurement of pressure and current for simple P/I or I/P testing
24 V loop supply
Zero, min. / max., hold and damp functions
Test functions for push button switches: adjusting, resetting, dead zone
Standards
CSA C22.2 no. 1010.1: 1992, IEC 61010, CAT I 30V
Supplied with
Fluke 717, holster, TL75 test leads, AC72 crocodile clips, 9 V battery, instruction manual&nbsp;

717/718/718Ex/719 Pressure Calibrators Data Sheet

fluke 717 300g -850mbar 20.68bar pressure calibrator kalibrator tekanan 850mbar hingga 20,68bar measurement pengukuran penentukuran pengukur fluke/福禄克 压力校准器 福禄克

fluke-717-300g-850mbar-to-20-68bar-pressure-calibrator

FLUKE 717 30G -850mbar to 2bar Pressure Calibrator

 Fluke 717 Series pressure calibrators offer performance, durability, and reliability. They are compact, lightweight, and easy to carry and use (with well-designed push button interface). They are EMI-tolerant, dust and splash resistant and have a removable battery door for quick battery changes.


717 30G – 623-9822, 12 to 30 psi (-850 mbar to 2 bar, -85 to 207 kPa)

717 300G – 623-9838, 12 to 300 psi, (-850 mbar to 20 bar, -85 to 2068.4 kPa)

717 100G – 757-7386, 12 to 100 psi, (-850 mbar to 7 bar, -85 to 689.48 kPa)

717 10000G – 757-7386, 0 to 1000 psi, (0 mbar to 69 bar, 0 to 6894.8 kPa)


Fluke 717, holster, TL75 test leads, AC72 crocodile clips, 9 V battery, instruction manual

FLUKE Pressure Calibrator, 30V Maximum Voltage, EMI-Tolerant - 717 Series - FLUKE-717 30G

Keep your systems in tip-top shape with this pressure calibrator from FLUKE. It's designed to measure and adjust the overpressure and vacuum of devices such as gauges and transducers. A wide measurement range between -850mbar and 2 bar means this is a suitable option for low-pressure applications such as HVAC systems. A resolution of 0.1mbar allows you to measure very small changes in pressure with pinpoint precision. The calibrator weighs just 600g, so it's a piece of cake to carry around your factory floor.
• Over pressure of 2xFS boosts safety
• 24-volt loop power supply provides power to the measured instrument, simplifying the calibration process
• Supports a wide range of pressure units including psi, kPa and inHg
• Broad operating temperature range between -10°C and +55°C to endure tough conditions


• Heating systems
• Oil and gas processing
• Pharmaceuticals manufacture


What's included with this pressure calibrator?

As it's supplied with a yellow holster, test leads, crocodile clips, a 9V battery and a CD instruction manual, you can get to work straight away.


It has a compact design with dimensions of 201 (L) x 98 (W) x 52mm (H), so it fits comfortably in your hands.
 

<h3 class="md-block-header-three">FLUKE 717 30G -850mbar to 2bar Pressure Calibrator</h3> Fluke 717 Series pressure calibrators offer performance, durability, and reliability. They are compact, lightweight, and easy to carry and use (with well-designed push button interface). They are EMI-tolerant, dust and splash resistant and have a removable battery door for quick battery changes. Fluke 717 series includes:717 30G – 623-9822, 12 to 30 psi (-850 mbar to 2 bar, -85 to 207 kPa)717 300G – 623-9838, 12 to 300 psi, (-850 mbar to 20 bar, -85 to 2068.4 kPa)717 100G – 757-7386, 12 to 100 psi, (-850 mbar to 7 bar, -85 to 689.48 kPa)717 10000G – 757-7386, 0 to 1000 psi, (0 mbar to 69 bar, 0 to 6894.8 kPa) <h3 class="md-block-header-three">Features and Benefits:</h3><ul class="md-block-unordered-list-item"><li>For measuring overpressure and vacuum with an internal sensor</li><li>Suitable for non-corrosive gases and liquids</li><li>Select from numerous technical units for the pressure</li><li>Simultaneous measurement of pressure and current for simple P/I or I/P testing</li><li>24 V loop supply</li><li>Zero, min. / max., hold and damp functions</li><li>Test functions for push button switches: adjusting, resetting, dead zone</li></ul><h3 class="md-block-header-three">Standards</h3>CSA C22.2 no. 1010.1: 1992, IEC 61010, CAT I 30V<h3 class="md-block-header-three">Supplied with</h3>Fluke 717, holster, TL75 test leads, AC72 crocodile clips, 9 V battery, instruction manual<h3 class="md-block-header-three">FLUKE Pressure Calibrator, 30V Maximum Voltage, EMI-Tolerant - 717 Series - FLUKE-717 30G</h3>Keep your systems in tip-top shape with this pressure calibrator from FLUKE. It&#x27;s designed to measure and adjust the overpressure and vacuum of devices such as gauges and transducers. A wide measurement range between -850mbar and 2 bar means this is a suitable option for low-pressure applications such as HVAC systems. A resolution of 0.1mbar allows you to measure very small changes in pressure with pinpoint precision. The calibrator weighs just 600g, so it&#x27;s a piece of cake to carry around your factory floor. • Over pressure of 2xFS boosts safety • 24-volt loop power supply provides power to the measured instrument, simplifying the calibration process • Supports a wide range of pressure units including psi, kPa and inHg • Broad operating temperature range between -10°C and +55°C to endure tough conditions <h3 class="md-block-header-three">Applications</h3>• Heating systems • Oil and gas processing • Pharmaceuticals manufacture <h3 class="md-block-header-three">What&#x27;s included with this pressure calibrator?</h3>As it&#x27;s supplied with a yellow holster, test leads, crocodile clips, a 9V battery and a CD instruction manual, you can get to work straight away. <h3 class="md-block-header-three">How big is this calibrator?</h3>It has a compact design with dimensions of 201 (L) x 98 (W) x 52mm (H), so it fits comfortably in your hands.

<h3>FLUKE 717 30G -850mbar to 2bar Pressure Calibrator</h3>
&nbsp;Fluke 717 Series pressure calibrators offer performance, durability, and reliability. They are compact, lightweight, and easy to carry and use (with well-designed push button interface). They are EMI-tolerant, dust and splash resistant and have a removable battery door for quick battery changes. 

Fluke 717 series includes:
717 30G – 623-9822, 12 to 30 psi (-850 mbar to 2 bar, -85 to 207 kPa)
717 300G – 623-9838, 12 to 300 psi, (-850 mbar to 20 bar, -85 to 2068.4 kPa)
717 100G – 757-7386, 12 to 100 psi, (-850 mbar to 7 bar, -85 to 689.48 kPa)
717 10000G – 757-7386, 0 to 1000 psi, (0 mbar to 69 bar, 0 to 6894.8 kPa) 

<h3>Features and Benefits:</h3>
<ul>
<li>For measuring overpressure and vacuum with an internal sensor</li>
<li>Suitable for non-corrosive gases and liquids</li>
<li>Select from numerous technical units for the pressure</li>
<li>Simultaneous measurement of pressure and current for simple P/I or I/P testing</li>
<li>24 V loop supply</li>
<li>Zero, min. / max., hold and damp functions</li>
<li>Test functions for push button switches: adjusting, resetting, dead zone</li>
</ul>
<h3>Standards</h3>
CSA C22.2 no. 1010.1: 1992, IEC 61010, CAT I 30V
<h3>Supplied with</h3>
Fluke 717, holster, TL75 test leads, AC72 crocodile clips, 9 V battery, instruction manual
<h3>FLUKE Pressure Calibrator, 30V Maximum Voltage, EMI-Tolerant - 717 Series - FLUKE-717 30G</h3>
Keep your systems in tip-top shape with this pressure calibrator from FLUKE. It's designed to measure and adjust the overpressure and vacuum of devices such as gauges and transducers. A wide measurement range between -850mbar and 2 bar means this is a suitable option for low-pressure applications such as HVAC systems. A resolution of 0.1mbar allows you to measure very small changes in pressure with pinpoint precision. The calibrator weighs just 600g, so it's a piece of cake to carry around your factory floor. 
• Over pressure of 2xFS boosts safety 
• 24-volt loop power supply provides power to the measured instrument, simplifying the calibration process 
• Supports a wide range of pressure units including psi, kPa and inHg 
• Broad operating temperature range between -10°C and +55°C to endure tough conditions 

<h3>Applications</h3>
• Heating systems 
• Oil and gas processing 
• Pharmaceuticals manufacture 

<h3>What's included with this pressure calibrator?</h3>
As it's supplied with a yellow holster, test leads, crocodile clips, a 9V battery and a CD instruction manual, you can get to work straight away. 

<h3>How big is this calibrator?</h3>
It has a compact design with dimensions of 201 (L) x 98 (W) x 52mm (H), so it fits comfortably in your hands. 
&nbsp;

fluke 717 30g -850mbar 2bar pressure calibrator kalibrator tekanan 850mbar hingga measurement pengukuran pengukur fluke/福禄克 压力校准器 福禄克

fluke-717-30g-850mbar-to-2bar-pressure-calibrator


 The Fluke precision loop calibrator reduces the time it takes to measure or source voltage or current and power up a loop. It is used for installation, calibration and troubleshooting field transmitters, valves and other control system components. Its primary function is to source and measures mA signals in the range of 0mA to 24mA. This loop calibrator can measure 0V to 30V and produce 24VDC loop power. This device includes HART communication functionality and supports a selected set of HART universal and common practice commands. It can be used as a loop calibrator or basic function communicator. It is supplied with AC72-1 alligator clips (2), TL75 test leads, soft case, 6 AAA batteries (installed), product manual, quick reference guide and a safety information manual. The calibrator offers the ability to store up to twenty HART device configuration files for uploading via 709H/TRACK software via the 709H/TRACK software. Configurations can be stored as .CSV or .TXT files. This allows the end-user to document plant HART easily.


Intuitive interface with a Quick-Set rotary encoder knob for fast setup and ease-of-use
LCD graphic display 128x64 pixels with backlight and contrast adjust (.34 high digits)
Best in class accuracy at 0.01% reading
Simple 2-wire connection for all measurements and protection up to 240VAC
User-selectable 250ohms resistor
Dedicated span and 25% step buttons
24VDC loop power with mA measure mode (-25% to 125%)
Resolution of 1μA on mA ranges and 1mV on voltage ranges
Variable step and ramp time in seconds
Adjustable span selection (0mA to 20mA or 4mA to 20mA)
Small (150mmx90mmx30mm), light (300g) and robust design
Powered by 6 standard AAA batteries (supplied installed)
Auto shutdown to conserve battery life (adjustable up to 30 minutes)
Protective holster (supplied) fits easily into user's hand
Includes built in selectable 250 Ω resistor for HART communication
Provides intuitive user interface with Quick-Set knob for fast setup


Process control automation
Manufacturing
Instrumentation


ANSI/ESD S20.20:2014
BS EN 61340-5-1:2007 

<h3 class="md-block-header-three">Fluke 709H, Loop Calibrator</h3> The Fluke precision loop calibrator reduces the time it takes to measure or source voltage or current and power up a loop. It is used for installation, calibration and troubleshooting field transmitters, valves and other control system components. Its primary function is to source and measures mA signals in the range of 0mA to 24mA. This loop calibrator can measure 0V to 30V and produce 24VDC loop power. This device includes HART communication functionality and supports a selected set of HART universal and common practice commands. It can be used as a loop calibrator or basic function communicator. It is supplied with AC72-1 alligator clips (2), TL75 test leads, soft case, 6 AAA batteries (installed), product manual, quick reference guide and a safety information manual. The calibrator offers the ability to store up to twenty HART device configuration files for uploading via 709H/TRACK software via the 709H/TRACK software. Configurations can be stored as .CSV or .TXT files. This allows the end-user to document plant HART easily. <h3 class="md-block-header-three">Features and Benefits</h3>Intuitive interface with a Quick-Set rotary encoder knob for fast setup and ease-of-use LCD graphic display 128x64 pixels with backlight and contrast adjust (.34 high digits) Best in class accuracy at 0.01% reading Simple 2-wire connection for all measurements and protection up to 240VAC User-selectable 250ohms resistor Dedicated span and 25% step buttons 24VDC loop power with mA measure mode (-25% to 125%) Resolution of 1μA on mA ranges and 1mV on voltage ranges Variable step and ramp time in seconds Adjustable span selection (0mA to 20mA or 4mA to 20mA) Small (150mmx90mmx30mm), light (300g) and robust design Powered by 6 standard AAA batteries (supplied installed) Auto shutdown to conserve battery life (adjustable up to 30 minutes) Protective holster (supplied) fits easily into user&#x27;s hand Includes built in selectable 250 Ω resistor for HART communication Provides intuitive user interface with Quick-Set knob for fast setup <h3 class="md-block-header-three">Applications</h3>Process control automation Manufacturing Instrumentation <h3 class="md-block-header-three">Certifications</h3>ANSI/ESD S20.20:2014 BS EN 61340-5-1:2007

<h3>Fluke 709H, Loop Calibrator</h3>
 
 The Fluke precision loop calibrator reduces the time it takes to measure or source voltage or current and power up a loop. It is used for installation, calibration and troubleshooting field transmitters, valves and other control system components. Its primary function is to source and measures mA signals in the range of 0mA to 24mA. This loop calibrator can measure 0V to 30V and produce 24VDC loop power. This device includes HART communication functionality and supports a selected set of HART universal and common practice commands. It can be used as a loop calibrator or basic function communicator. It is supplied with AC72-1 alligator clips (2), TL75 test leads, soft case, 6 AAA batteries (installed), product manual, quick reference guide and a safety information manual. The calibrator offers the ability to store up to twenty HART device configuration files for uploading via 709H/TRACK software via the 709H/TRACK software. Configurations can be stored as .CSV or .TXT files. This allows the end-user to document plant HART easily. 

<h3>Features and Benefits</h3>
Intuitive interface with a Quick-Set rotary encoder knob for fast setup and ease-of-use 
LCD graphic display 128x64 pixels with backlight and contrast adjust (.34 high digits) 
Best in class accuracy at 0.01% reading 
Simple 2-wire connection for all measurements and protection up to 240VAC 
User-selectable 250ohms resistor 
Dedicated span and 25% step buttons 
24VDC loop power with mA measure mode (-25% to 125%) 
Resolution of 1μA on mA ranges and 1mV on voltage ranges 
Variable step and ramp time in seconds 
Adjustable span selection (0mA to 20mA or 4mA to 20mA) 
Small (150mmx90mmx30mm), light (300g) and robust design 
Powered by 6 standard AAA batteries (supplied installed) 
Auto shutdown to conserve battery life (adjustable up to 30 minutes) 
Protective holster (supplied) fits easily into user's hand 
Includes built in selectable 250 Ω resistor for HART communication 
Provides intuitive user interface with Quick-Set knob for fast setup 

<h3>Applications</h3>
Process control automation 
Manufacturing 
Instrumentation 

<h3>Certifications</h3>
ANSI/ESD S20.20:2014 
BS EN 61340-5-1:2007&nbsp;

Fluke 709H, Loop Calibrator

fluke 709h, loop calibrator kalibrator electrical power testing pengujian daya listrik gelung ujian tenaga elektrik fluke/福禄克 709h 回路校准器 电力测试 福禄克

fluke-709h-loop-calibrator

Fluke AC175 Crocodile Clip Alligator Clip Connection, Nickel-Plated Steel Contact, 10A, Black, Red

FLUKE Crocodile Clip, Insulated, 8mm Jaw Opening - AC175

Get your teeth into reliable and efficient electrical testing with these crocodile clips from FLUKE. You get two colour-coded clips in the package, one red and one black, making them easy to identify. All you need to do is slide them onto the test lead, clip them to the desired electrical device, and you're ready to go. As they're designed for use with Fluke multimeters and leads, including TL71, TL75 and TL175, you're guaranteed a secure fit and a reliable connection every time.

• 8mm jaw opening for a precision fit on smaller devices
• Flexible boots for reliable test connections and safe handling
• 10A current rating for versatile electrical testing

• Electrical installation and maintenance
• Automotive industry
• Electrical engineering
• Component manufacturing 

<h3 class="md-block-header-three">Fluke AC175 Crocodile Clip Alligator Clip Connection, Nickel-Plated Steel Contact, 10A, Black, Red</h3><ul class="md-block-unordered-list-item"><li> Current Rating	10A</li><li>Jaw Opening	8mm</li><li>Contact Material	Nickel-Plated Steel</li><li>Insulated	Yes</li><li>Colour	Black, Red</li><li>Connector Type	Alligator Clip</li></ul>Features and Benefits• Both test leads and probes available • Durable connection, which guarantees excellent results • Single accessories and kits • Different safety categories to suit the application • Insulated wiresWhat are test leads?These leads are connecting cables which are used specifically for Multimeters, attaching a test probe to the end will allow the user to measure the required voltage, current or electrical resistance. As it assists operation with a multimeter, at least two of these types of electrical values are measured.What are test probes?Connecting to Fluke multimeters, a set of test probes will measure the device or target for an accurate reading, such as voltage or current. Due to the flexibility and quality produced by Fluke, each probe provides much-needed precision.FLUKE Crocodile Clip, Insulated, 8mm Jaw Opening - AC175Get your teeth into reliable and efficient electrical testing with these crocodile clips from FLUKE. You get two colour-coded clips in the package, one red and one black, making them easy to identify. All you need to do is slide them onto the test lead, clip them to the desired electrical device, and you&#x27;re ready to go. As they&#x27;re designed for use with Fluke multimeters and leads, including TL71, TL75 and TL175, you&#x27;re guaranteed a secure fit and a reliable connection every time.Features &amp; Benefits• 8mm jaw opening for a precision fit on smaller devices • Flexible boots for reliable test connections and safe handling • 10A current rating for versatile electrical testingApplications• Electrical installation and maintenance • Automotive industry • Electrical engineering • Component manufacturing

<h3>Fluke AC175 Crocodile Clip Alligator Clip Connection, Nickel-Plated Steel Contact, 10A, Black, Red</h3>
<ul>
<li>&nbsp;Current Rating	10A</li>
<li>Jaw Opening	8mm</li>
<li>Contact Material	Nickel-Plated Steel</li>
<li>Insulated	Yes</li>
<li>Colour	Black, Red</li>
<li>Connector Type	Alligator Clip</li>
</ul>
Features and Benefits
• Both test leads and probes available 
• Durable connection, which guarantees excellent results 
• Single accessories and kits 
• Different safety categories to suit the application 
• Insulated wires
What are test leads?
These leads are connecting cables which are used specifically for Multimeters, attaching a test probe to the end will allow the user to measure the required voltage, current or electrical resistance. As it assists operation with a multimeter, at least two of these types of electrical values are measured.
What are test probes?
Connecting to Fluke multimeters, a set of test probes will measure the device or target for an accurate reading, such as voltage or current. Due to the flexibility and quality produced by Fluke, each probe provides much-needed precision.
FLUKE Crocodile Clip, Insulated, 8mm Jaw Opening - AC175
Get your teeth into reliable and efficient electrical testing with these crocodile clips from FLUKE. You get two colour-coded clips in the package, one red and one black, making them easy to identify. All you need to do is slide them onto the test lead, clip them to the desired electrical device, and you're ready to go. As they're designed for use with Fluke multimeters and leads, including TL71, TL75 and TL175, you're guaranteed a secure fit and a reliable connection every time.
Features &amp; Benefits
• 8mm jaw opening for a precision fit on smaller devices 
• Flexible boots for reliable test connections and safe handling 
• 10A current rating for versatile electrical testing
Applications
• Electrical installation and maintenance 
• Automotive industry 
• Electrical engineering 
• Component manufacturing&nbsp;

AC175 Crocodile Clip Set

fluke ac175 crocodile clip alligator connection, nickel-plated steel contact, 10a, black, red sambungan klip buaya ac175, kontak baja berlapis nikel, hitam, merah clips buaya, sentuhan keluli bersalut fluke/福禄克 鳄鱼夹连接器，镀镍钢触点，10a，黑色，红色 福禄克