TIGER BRAND PAINT

Painting Materials

painting-materials

Paints

paints

Primers, Sealers & Undercoats

primers-sealers-undercoats

Tiger Brand 5L/16L Tiger Aluminum Paint (AP-203)

Tiger Brand Aluminum AP-203 is a single component based alkyd finish for both exterior and interior use. 

Tiger Brand Aluminum 203 is a silver-coloured topcoat for use on steel and wood substrates. 

Suitably for use direct on steel or primed steel. 

 Easy to apply with good hiding power. 

 Excellent color retention for both exterior and interior. 

Tiger Brand Aluminum AP-203 could be applied directly to freshly blasted steel. *Could also be used on well prepared steel with existing or aged two-component coatings. The temperature of the substrate should be at least 3oCelcius above the dew point. 

Can be applied by either airless or conventional spray. Tiger Brand Aluminium AP-203 can be applied by roller or brush, however, multiple coats may be needed to achieve the recommended film thickness. 

Recommended Wet film thickness: 110 microns 

Spreading rate: 9 m2/litre (calculated) Aluminum Paint AP-203 

If thinning is required please use Thinner 237 up to 10% part by weight. 

All equipment should be thoroughly cleaned with Thinner 237 after use. 

The product comes in both 1, 3.5, 5 and 20 litres packing. Must be stored in cool well ventilated area away from direct sunlight. 

Do not inhale spray mist. Remove all contaminated clothing and wash skin with suitable proprietary cleaners or soap and water. In case of contact with eyes, flush immediately with water for at least 15 minutes. If persistent discomfort or irritation occurs after application please seek medical advice. 

*It is the responsibility of the clients to ensure that there is no wrinkling or delamination of aged or existing coating by Tiger Brand Aluminum 237 

<h3 class="md-block-header-three">Tiger Brand 5L/16L Tiger Aluminum Paint (AP-203)</h3>TECHNICAL DATA SHEET Tiger Brand Aluminum AP-203 Solvent Based Alkyd Aluminum Paint DESCRIPTION: Tiger Brand Aluminum AP-203 is a single component based alkyd finish for both exterior and interior use. TYPICAL USES: Tiger Brand Aluminum 203 is a silver-coloured topcoat for use on steel and wood substrates. SUBSTRATES/SURFACES: Suitably for use direct on steel or primed steel. ADVANTAGES:  Easy to apply with good hiding power.  Excellent color retention for both exterior and interior.  Excellent weatherability.  Good hiding power. TECHNICAL DATA @ 250C: Colour: Sliver Volume Solids: 32.0% Viscosity 60.5 KU (+/-) 2.0 Specific Gravity 1.00 (+/-) 0.15 Dry to touch: 1 hour Hard Dry 4 hours DIRECTIONS FOR USE: Surface Preparation Tiger Brand Aluminum AP-203 could be applied directly to freshly blasted steel. *Could also be used on well prepared steel with existing or aged two-component coatings. The temperature of the substrate should be at least 3oCelcius above the dew point. Application Can be applied by either airless or conventional spray. Tiger Brand Aluminium AP-203 can be applied by roller or brush, however, multiple coats may be needed to achieve the recommended film thickness. Spreading Information Recommended Wet film thickness: 110 microns Dry film thickness: 40 microns Spreading rate: 9 m2/litre (calculated) Aluminum Paint AP-203 Thinning If thinning is required please use Thinner 237 up to 10% part by weight. Cleaning All equipment should be thoroughly cleaned with Thinner 237 after use. PACKAGING AND STORAGE: The product comes in both 1, 3.5, 5 and 20 litres packing. Must be stored in cool well ventilated area away from direct sunlight. HEALTH AND SAFETY: Do not inhale spray mist. Remove all contaminated clothing and wash skin with suitable proprietary cleaners or soap and water. In case of contact with eyes, flush immediately with water for at least 15 minutes. If persistent discomfort or irritation occurs after application please seek medical advice. *It is the responsibility of the clients to ensure that there is no wrinkling or delamination of aged or existing coating by Tiger Brand Aluminum 237

<h3>Tiger Brand 5L/16L Tiger Aluminum Paint (AP-203)</h3>
TECHNICAL DATA SHEET&nbsp;
Tiger Brand Aluminum AP-203&nbsp;
Solvent Based Alkyd Aluminum Paint&nbsp;
DESCRIPTION:&nbsp;
Tiger Brand Aluminum AP-203 is a single component based alkyd finish for both exterior and interior use.&nbsp;
TYPICAL USES:&nbsp;
Tiger Brand Aluminum 203 is a silver-coloured topcoat for use on steel and wood substrates.&nbsp;
SUBSTRATES/SURFACES:&nbsp;
Suitably for use direct on steel or primed steel.&nbsp;
ADVANTAGES:&nbsp;
 Easy to apply with good hiding power.&nbsp;
 Excellent color retention for both exterior and interior.&nbsp;
 Excellent weatherability.&nbsp;
 Good hiding power.&nbsp;
TECHNICAL DATA @ 250C:&nbsp;
Colour: Sliver&nbsp;
Volume Solids: 32.0%&nbsp;
Viscosity 60.5 KU (+/-) 2.0&nbsp;
Specific Gravity 1.00 (+/-) 0.15&nbsp;
Dry to touch: 1 hour&nbsp;
Hard Dry 4 hours&nbsp;
DIRECTIONS FOR USE:&nbsp;
Surface Preparation&nbsp;
Tiger Brand Aluminum AP-203 could be applied directly to freshly blasted steel. *Could also be used on well prepared steel with existing or aged two-component coatings. The temperature of the substrate should be at least 3oCelcius above the dew point.&nbsp;
Application&nbsp;
Can be applied by either airless or conventional spray. Tiger Brand Aluminium AP-203 can be applied by roller or brush, however, multiple coats may be needed to achieve the recommended film thickness.&nbsp;
Spreading Information&nbsp;
Recommended Wet film thickness: 110 microns&nbsp;
Dry film thickness: 40 microns&nbsp;
Spreading rate: 9 m2/litre (calculated) Aluminum Paint AP-203&nbsp;
Thinning&nbsp;
If thinning is required please use Thinner 237 up to 10% part by weight.&nbsp;
Cleaning&nbsp;
All equipment should be thoroughly cleaned with Thinner 237 after use.&nbsp;
PACKAGING AND STORAGE:&nbsp;
The product comes in both 1, 3.5, 5 and 20 litres packing. Must be stored in cool well ventilated area away from direct sunlight.&nbsp;
HEALTH AND SAFETY:&nbsp;
Do not inhale spray mist. Remove all contaminated clothing and wash skin with suitable proprietary cleaners or soap and water. In case of contact with eyes, flush immediately with water for at least 15 minutes. If persistent discomfort or irritation occurs after application please seek medical advice.&nbsp;
*It is the responsibility of the clients to ensure that there is no wrinkling or delamination of aged or existing coating by Tiger Brand Aluminum 237&nbsp;

Ms Mah

Tiger Brand 5l Tiger Aluminum Paint (AP-203)

tiger brand 5l aluminum paint (ap-203) cat alumunium merk primers, sealers undercoats primer, sealer lapisan bawah aluminium asas, pengedap alas paint/老虎品牌油漆 虎牌5l虎铝漆（ap-203） 底漆，密封剂和底漆 老虎品牌油漆

tiger-brand-5l-tiger-aluminum-paint-ap-203

Weight

Tiger Brand5L Tiger One Pack QD Red / Grey Oxide Primer 

Tiger Brand Quick Dry 6150 is a single component quick dry alkyd primer reinforced with zinc phosphate. 

Recommended for industrial and residential applications where rapid turnaround is required. 

Recommended mainly for ferrous substrates. For other substrates, please check with Seng Fong Paint Representative. 

 Easy to apply coating by brushing, rolling or spraying. 

Colour: Red Oxide, Grey (other colours can be customized) 

Dry To Recoat: 6 Hours (minimum); Indefinite (maximum) 

Surface should be free from water, oil, grit and any other foreign material 

Tiger Brand Quick Dry Primer 6150 can be applied by spraying, brushing or rolling. The application and finishing by rolling, brushing or spraying can be further enhanced by using the proper thinner. 

(Please see section on thinning for further information.) Quick Dry Primer 6150 

Spreading rate: 12.5 m2/litre (calculated) 

Use Thinner 3002 up to 10% by weight for better application and finish. 

Use Thinner 3002 up to 5% by weight for better application and finish. 

All equipment should be thoroughly cleaned with Thinner 3002 after use. 

The product comes in 5 and 20 litres packing. Must be stored in cool well ventilated area away from direct sunlight. 

Disclaimer: The technical information provided is believed to be reliable based on the manufacturer’s tests and experience. However as the product is often applied in varying field conditions beyond the manufacturer’s control, our company cannot guarantee anything but the product itself. And the manufacturer reserves the right to amend the information without any notice. 

<h3 class="md-block-header-three">Tiger Brand5L Tiger One Pack QD Red / Grey Oxide Primer </h3><h3 class="md-block-header-three">(QD-RO/GO-6150)</h3>TECHNICAL DATA SHEET TIGER BRAND QUICK DRY PRIMER 6150 Solvent Based Quick Dry Alkyd Coating DESCRIPTION: Tiger Brand Quick Dry 6150 is a single component quick dry alkyd primer reinforced with zinc phosphate. TYPICAL USES: Recommended for industrial and residential applications where rapid turnaround is required. SUBSTRATES: Recommended mainly for ferrous substrates. For other substrates, please check with Seng Fong Paint Representative. ADVANTAGES:  Good corrosion resistance.  Dries very quickly.  Easy to apply coating by brushing, rolling or spraying.  Exhibits good hardness. TECHNICAL DATA: Colour: Red Oxide, Grey (other colours can be customized) Finish: Matt Volume Solids: 44 ± 3% TYPICAL CURING CONDITIONS: Touch Dry @ 30oC: 10 To 15 minutes Hard Dry @ 30oC: 2 to 4 Hours Dry To Recoat: 6 Hours (minimum); Indefinite (maximum) DIRECTIONS FOR USE: Surface Preparation Surface should be free from water, oil, grit and any other foreign material Application Tiger Brand Quick Dry Primer 6150 can be applied by spraying, brushing or rolling. The application and finishing by rolling, brushing or spraying can be further enhanced by using the proper thinner. (Please see section on thinning for further information.) Quick Dry Primer 6150 Typical Spreading Information Wet film thickness: 89 microns Dry film thickness: 35 microns Spreading rate: 12.5 m2/litre (calculated) Thinning Spraying Use Thinner 3002 up to 10% by weight for better application and finish. Brushing And Spraying Use Thinner 3002 up to 5% by weight for better application and finish. Cleaning All equipment should be thoroughly cleaned with Thinner 3002 after use. PACKAGING AND STORAGE: The product comes in 5 and 20 litres packing. Must be stored in cool well ventilated area away from direct sunlight. HEALTH AND SAFETY: Do not inhale spray mist. Remove all contaminated clothing and wash skin with suitable proprietary cleaners or soap and water. In case of contact with eyes, flush immediately with water for at least 15 minutes. If persistent discomfort or irritation occurs after application please seek medical advice. Disclaimer: The technical information provided is believed to be reliable based on the manufacturer’s tests and experience. However as the product is often applied in varying field conditions beyond the manufacturer’s control, our company cannot guarantee anything but the product itself. And the manufacturer reserves the right to amend the information without any notice.

<h3>Tiger Brand5L Tiger One Pack QD Red / Grey Oxide Primer </h3>
<h3>(QD-RO/GO-6150)</h3>
TECHNICAL DATA SHEET&nbsp;
TIGER BRAND QUICK DRY PRIMER 6150&nbsp;
Solvent Based Quick Dry Alkyd Coating&nbsp;
DESCRIPTION:&nbsp;
Tiger Brand Quick Dry 6150 is a single component quick dry alkyd primer reinforced with zinc phosphate.&nbsp;
TYPICAL USES:&nbsp;
Recommended for industrial and residential applications where rapid turnaround is required.&nbsp;
SUBSTRATES:&nbsp;
Recommended mainly for ferrous substrates. For other substrates, please check with Seng Fong Paint Representative.&nbsp;
ADVANTAGES:&nbsp;
 Good corrosion resistance.&nbsp;
 Dries very quickly.&nbsp;
 Easy to apply coating by brushing, rolling or spraying.&nbsp;
 Exhibits good hardness.&nbsp;
TECHNICAL DATA:&nbsp;
Colour: Red Oxide, Grey (other colours can be customized)&nbsp;
Finish: Matt&nbsp;
Volume Solids: 44 ± 3%&nbsp;
TYPICAL CURING CONDITIONS:&nbsp;
Touch Dry @ 30oC: 10 To 15 minutes&nbsp;
Hard Dry @ 30oC: 2 to 4 Hours&nbsp;
Dry To Recoat: 6 Hours (minimum); Indefinite (maximum)&nbsp;
DIRECTIONS FOR USE:&nbsp;
Surface Preparation&nbsp;
Surface should be free from water, oil, grit and any other foreign material&nbsp;
Application&nbsp;
Tiger Brand Quick Dry Primer 6150 can be applied by spraying, brushing or rolling. The application and finishing by rolling, brushing or spraying can be further enhanced by using the proper thinner.&nbsp;
(Please see section on thinning for further information.) Quick Dry Primer 6150&nbsp;
Typical Spreading Information&nbsp;
Wet film thickness: 89 microns&nbsp;
Dry film thickness: 35 microns&nbsp;
Spreading rate: 12.5 m2/litre (calculated)&nbsp;
Thinning&nbsp;
Spraying&nbsp;
Use Thinner 3002 up to 10% by weight for better application and finish.&nbsp;
Brushing And Spraying&nbsp;
Use Thinner 3002 up to 5% by weight for better application and finish.&nbsp;
Cleaning&nbsp;
All equipment should be thoroughly cleaned with Thinner 3002 after use.&nbsp;
PACKAGING AND STORAGE:&nbsp;
The product comes in 5 and 20 litres packing. Must be stored in cool well ventilated area away from direct sunlight.&nbsp;
HEALTH AND SAFETY:&nbsp;
Do not inhale spray mist. Remove all contaminated clothing and wash skin with suitable proprietary cleaners or soap and water. In case of contact with eyes, flush immediately with water for at least 15 minutes. If persistent discomfort or irritation occurs after application please seek medical advice.&nbsp;
Disclaimer: The technical information provided is believed to be reliable based on the manufacturer’s tests and experience. However as the product is often applied in varying field conditions beyond the manufacturer’s control, our company cannot guarantee anything but the product itself. And the manufacturer reserves the right to amend the information without any notice.&nbsp;

Tiger Brand 5l Tiger One Pack Qd Red / Grey Oxide Primer (qd-ro/go-6150)

tiger brand 5l one pack qd red grey oxide primer (qd-ro/go-6150) (qd-ro go-6150) primers, sealers undercoats primer, sealer lapisan bawah paint gray cat asas, pengedap alas paint/老虎品牌油漆 qd红色/灰色氧化物底漆（qd-ro go-6150） 底漆，密封剂和底漆 老虎品牌油漆

tiger-brand-5l-tiger-one-pack-qd-red-grey-oxide-primer-qd-ro-go-6150

QD-RO

GO-6150

Colour

Tiger Brand 5L Tiger Gloss Finish Enamel GF-300 

A premium high gloss enamel for both interior and exterior to all wood and metal surfaces to privde good durability and good anti-fungus properties with colourful finishing.

Product Name  : Tiger Brand Gloss Finish Paint 300

Color / Name : Colours (See Colour Chart)

Substances presenting a health hazard within the meaning of the Dangerous Substances Directive 67 / 548 / EEC.

3. HAZARDS IDENTIFICATION OF THE PREPARATION

Toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment.

General : In all cases of doubt, or when symptoms persist, seek medical attention. Never give anything by mouth to an unconscious person.

Inhalation : Remove to fresh air, keep patient warm and at rest, if breathing is irregular of stopped, administer artificial respiration. Give nothing by mouth. If unconscious place in recovery position and seek medical advice. 

Eye Contact : Irrigate copiously with clean, fresh water for at least 10 minutes, holding the eyelids apart and seek medical advice.

Skin contact : Remove contaminated clothing. Wash skin thoroughly with soap and water or use recognized skin cleanser. Do NOT use solvents or thinners.

Ingestion : If accidentally swallowed, obtain immediate medical attention. Keep at rest . Do NOT induce vomiting. 

<h3 class="md-block-header-three">Tiger Brand 5L Tiger Gloss Finish Enamel GF-300 </h3><ul class="md-block-unordered-list-item"><li>TIGER GLOSS FINISH PAINT 5 L</li><li>A premium high gloss enamel for both interior and exterior to all wood and metal surfaces to privde good durability and good anti-fungus properties with colourful finishing.</li></ul>39 different colourProduct Name : Tiger Brand Gloss Finish Paint 300Color / Name : Colours (See Colour Chart)COMPOSITION / INFORMATION ON INGREDIENTSSubstances presenting a health hazard within the meaning of the Dangerous Substances Directive 67 / 548 / EEC.Name CAS-No.Conc.RangeSymbol R-Phrases Kerosene8008-20-625 - 50%Xi, XnR10, R38, R65, R51/53Lead Chromate12656-85-810 - 25%N, T, XiCarc. Cat 3; R40Repr.Cat.1, R61Repr.Cat.3, R62R33, R50/53Xylene 1330-20-72.5 - 10%XnR10, R20/21, R38Solvent naptha (petroleum), 64742-82-12.5 - 10%Xn, NR10, R65, R66, R67hydrodesulfurized heavyR51/53See full text of phrases in section 16.3. HAZARDS IDENTIFICATION OF THE PREPARATIONFlammable.Irritating to skin.Danger of cumulative effect.Limited evidence of carcinogenic effect.May cause harm to unborn child.Possible risk of impaired fertility.Toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment.May cause lung damage if swallowed.4. FIRST AID MEASURESGeneral : In all cases of doubt, or when symptoms persist, seek medical attention. Never give anything by mouth to an unconscious person.Inhalation : Remove to fresh air, keep patient warm and at rest, if breathing is irregular of stopped, administer artificial respiration. Give nothing by mouth. If unconscious place in recovery position and seek medical advice. Eye Contact : Irrigate copiously with clean, fresh water for at least 10 minutes, holding the eyelids apart and seek medical advice.Skin contact : Remove contaminated clothing. Wash skin thoroughly with soap and water or use recognized skin cleanser. Do NOT use solvents or thinners.Ingestion : If accidentally swallowed, obtain immediate medical attention. Keep at rest . Do NOT induce vomiting.

<h3>Tiger Brand 5L Tiger Gloss Finish Enamel GF-300 </h3>
<ul>
<li>TIGER GLOSS FINISH PAINT 5 L</li>
<li>A premium high gloss enamel for both interior and exterior to all wood and metal surfaces to privde good durability and good anti-fungus properties with colourful finishing.</li>
</ul>
39 different colour
Product Name : Tiger Brand Gloss Finish Paint 300
Color / Name : Colours (See Colour Chart)
COMPOSITION / INFORMATION ON INGREDIENTS
Substances presenting a health hazard within the meaning of the Dangerous Substances Directive 67 / 548 / EEC.
Name 
CAS-No.
Conc.Range
Symbol&nbsp;
R-Phrases&nbsp;
Kerosene
8008-20-6
25 - 50%
Xi, Xn
R10, R38, R65, R51/53
Lead Chromate
12656-85-8
10 - 25%
N, T, Xi
Carc. Cat 3; R40
Repr.Cat.1, R61
Repr.Cat.3, R62
R33, R50/53
Xylene&nbsp;
1330-20-7
2.5 - 10%
Xn
R10, R20/21, R38
Solvent naptha (petroleum),&nbsp;
64742-82-1
2.5 - 10%
Xn, N
R10, R65, R66, R67
hydrodesulfurized heavy
R51/53
See full text of phrases in section 16.
3. HAZARDS IDENTIFICATION OF THE PREPARATION
Flammable.
Irritating to skin.
Danger of cumulative effect.
Limited evidence of carcinogenic effect.
May cause harm to unborn child.
Possible risk of impaired fertility.
Toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment.
May cause lung damage if swallowed.
4. FIRST AID MEASURES
General : In all cases of doubt, or when symptoms persist, seek medical attention. Never give anything by mouth to an unconscious person.
Inhalation : Remove to fresh air, keep patient warm and at rest, if breathing is irregular of stopped, administer artificial respiration. Give nothing by mouth. If unconscious place in recovery position and seek medical advice.&nbsp;
Eye Contact : Irrigate copiously with clean, fresh water for at least 10 minutes, holding the eyelids apart and seek medical advice.
Skin contact : Remove contaminated clothing. Wash skin thoroughly with soap and water or use recognized skin cleanser. Do NOT use solvents or thinners.
Ingestion : If accidentally swallowed, obtain immediate medical attention. Keep at rest . Do NOT induce vomiting.&nbsp;