Iwata

MISUMI

Precision Brand

RS Pro

Mechanical Parts

mechanical-parts

Ball Bearings

ball-bearings

Machinery Parts

machinery-parts

Metal Rods 

metal-rods

Construction

construction

Shim

shim

Precision Brand® precut slotted shims are made from a 300 series stainless steel that resists rust and corrosion. Precut shims have tabs that makes shim placement easier and safer, while eliminating the need to place hands under the machinery during installation or removal of shim. Each 2 Inch x 2 Inch motor shim has a slot size of 16mm and can be used for bolt sizes up to a maximum of 5/8 Inch. Each shim is marked with thickness in metric. Precision Brand® slotted shim is the best way to solve alignment and leveling problems on motors, pumps, generators, and other plant machinery. Precut slotted shims are economical, safe, and accurate. Reduce labor costs by eliminating hand cutting and reduce downtime by eliminating shim preparation. 

Precut slotted shims save money. Precuts decrease time and labor costs and ultimately reduce machine downtime. Precuts also eliminate the work involved in the hand cutting, flattening and deburring of shim stock. Precision Brand Slotted Shim is made of a corrosive resistant, stainless steel. These shims are made with a tab which allows for safe and easy installation and removal. 

Any manufacturing plant that has numerous pumps and motors, which are maintained on a routine schedule, will benefit from them. Paper mills, refineries, utilities, food processors and large OEMs have experienced cost savings by using precut slotted shims. Industries that have developed predictive maintenance programs (using laser alignment and/or vibration analysis equipment) have found both time and cost savings with precut slotted shims. 

What competitive advantage does Precision Brand® Slotted Shim offer?

Precision Brand realizes that quality and thickness tolerances are the two most important considerations when manufacturing shims. PBP publishes and guarantees thickness tolerances that are tighter than any other shim on the market and that are superior to the industry standards. Our material is produced using special gauge charts that require special millruns. This assures your customers of the tightest tolerances and the highest quality when using Precision Brand®. 

Why are thickness tolerances so important?

Think about it. If you are using precision alignment equipment to determine the soft foot (gap) under a motor foot, you will want to install shims that are as close as possible to that gap’s thickness. With our guaranteed thickness they will be “right-on” when you do that final check. This will save time of having to do another measurement rotation.

Aren’t all precut slotted shims marked with an “actual” thickness?

No, the thickness marked on most shims is just nominally close. Nominally close can be defined as whatever thickness tolerance is acceptable to that manufacturer. This means that the thickness can vary considerably from what is marked on the shim. Using Precision Brand® shims gives your customers the advantage. Remember that PBP is the only shim manufacturer to publish and guarantee slotted shim tolerances.

What about shims that claim to be marked with an “exact” thickness like .098 instead of .100?

There are two things to remember when working with these shims. First, the off-size marking is probably not correct due to the variations that occur in the stainless steel rolling process. The only way this marking could be correct would be if each shim was measured and stamped individually. As you can realize, this is neither feasible nor economically possible for any shim manufacturer. Beware whenever you encounter a shim with a non-standard, “off-size” decimal thickness. Remember that these shims were originally intended to be “on-size” and ended up “off-size”. Second, when stacking numerous shims to make a shim pack, it is much easier to think in terms of “on-size”, closer tolerance shims. To illustrate this, let’s do two math problems:

Solve for X: 20+20+20+20+X=100 (on-size shims) OR Solve for X: 22+19+20+19+X=100 (off-size shims)

Working with “on-size” shims eliminates the time spent searching for that “perfect combination”.

How do I know that I am getting the best?

Prove it to yourself. Mic your shims with a micrometer or a caliper to determine the thickness (especially .050 and thicker!). Make sure to check in more than one spot to look for consistency throughout the shim. Compare these findings to what the shim is labeled. While you are checking, also look for burrs and crown (non-flatness). These two conditions can create false readings in the equipment that will lead to wasted shimming time. Put Precision Brand Slotted Shim to the test and I am sure that you will find it to be the best!

Thickness 0.001, 0.002, 0.003, 0.004, 0.005, 0.010, 0.015, 0.020, 0.025, 0.050, 0.075, 0.100 and 0.125 Inch

Quantity Per Package: 260 Pieces (20 pieces for each thickness)

Precision Brand® precut slotted shims are made from a 300 series stainless steel that resists rust and corrosion. Precut shims have tabs that makes shim placement easier and safer, while eliminating the need to place hands under the machinery during installation or removal of shim. Each 2 Inch x 2 Inch motor shim has a slot size of 16mm and can be used for bolt sizes up to a maximum of 5/8 Inch. Each shim is marked with thickness in metric. Precision Brand® slotted shim is the best way to solve alignment and leveling problems on motors, pumps, generators, and other plant machinery. Precut slotted shims are economical, safe, and accurate. Reduce labor costs by eliminating hand cutting and reduce downtime by eliminating shim preparation. Precut slotted shims save money. Precuts decrease time and labor costs and ultimately reduce machine downtime. Precuts also eliminate the work involved in the hand cutting, flattening and deburring of shim stock. Precision Brand Slotted Shim is made of a corrosive resistant, stainless steel. These shims are made with a tab which allows for safe and easy installation and removal. Any manufacturing plant that has numerous pumps and motors, which are maintained on a routine schedule, will benefit from them. Paper mills, refineries, utilities, food processors and large OEMs have experienced cost savings by using precut slotted shims. Industries that have developed predictive maintenance programs (using laser alignment and/or vibration analysis equipment) have found both time and cost savings with precut slotted shims. What competitive advantage does Precision Brand® Slotted Shim offer?Precision Brand realizes that quality and thickness tolerances are the two most important considerations when manufacturing shims. PBP publishes and guarantees thickness tolerances that are tighter than any other shim on the market and that are superior to the industry standards. Our material is produced using special gauge charts that require special millruns. This assures your customers of the tightest tolerances and the highest quality when using Precision Brand®. Why are thickness tolerances so important?Think about it. If you are using precision alignment equipment to determine the soft foot (gap) under a motor foot, you will want to install shims that are as close as possible to that gap’s thickness. With our guaranteed thickness they will be “right-on” when you do that final check. This will save time of having to do another measurement rotation.Aren’t all precut slotted shims marked with an “actual” thickness?No, the thickness marked on most shims is just nominally close. Nominally close can be defined as whatever thickness tolerance is acceptable to that manufacturer. This means that the thickness can vary considerably from what is marked on the shim. Using Precision Brand® shims gives your customers the advantage. Remember that PBP is the only shim manufacturer to publish and guarantee slotted shim tolerances.What about shims that claim to be marked with an “exact” thickness like .098 instead of .100?There are two things to remember when working with these shims. First, the off-size marking is probably not correct due to the variations that occur in the stainless steel rolling process. The only way this marking could be correct would be if each shim was measured and stamped individually. As you can realize, this is neither feasible nor economically possible for any shim manufacturer. Beware whenever you encounter a shim with a non-standard, “off-size” decimal thickness. Remember that these shims were originally intended to be “on-size” and ended up “off-size”. Second, when stacking numerous shims to make a shim pack, it is much easier to think in terms of “on-size”, closer tolerance shims. To illustrate this, let’s do two math problems:Solve for X: 20+20+20+20+X=100 (on-size shims) OR Solve for X: 22+19+20+19+X=100 (off-size shims)Working with “on-size” shims eliminates the time spent searching for that “perfect combination”.How do I know that I am getting the best?Prove it to yourself. Mic your shims with a micrometer or a caliper to determine the thickness (especially .050 and thicker!). Make sure to check in more than one spot to look for consistency throughout the shim. Compare these findings to what the shim is labeled. While you are checking, also look for burrs and crown (non-flatness). These two conditions can create false readings in the equipment that will lead to wasted shimming time. Put Precision Brand Slotted Shim to the test and I am sure that you will find it to be the best!Product Description: Precut Slotted ShimMaterial: 300 Series Stainless SteelSize: A (2 Inch x 2 Inch)Length A: 2 InchThickness 0.001, 0.002, 0.003, 0.004, 0.005, 0.010, 0.015, 0.020, 0.025, 0.050, 0.075, 0.100 and 0.125 InchGroove G: 5/8 InchFor Bolt Size: 5/8 UNC or UNFQuantity Per Package: 260 Pieces (20 pieces for each thickness)Packaging Weight: 4.96 kg

&nbsp;
Precision Brand® precut slotted shims are made from a 300 series stainless steel that resists rust and corrosion. Precut shims have tabs that makes shim placement easier and safer, while eliminating the need to place hands under the machinery during installation or removal of shim. Each 2 Inch x 2 Inch motor shim has a slot size of 16mm and can be used for bolt sizes up to a maximum of 5/8 Inch. Each shim is marked with thickness in metric. Precision Brand® slotted shim is the best way to solve alignment and leveling problems on motors, pumps, generators, and other plant machinery. Precut slotted shims are economical, safe, and accurate. Reduce labor costs by eliminating hand cutting and reduce downtime by eliminating shim preparation.&nbsp;
Precut slotted shims save money. Precuts decrease time and labor costs and ultimately reduce machine downtime. Precuts also eliminate the work involved in the hand cutting, flattening and deburring of shim stock. Precision Brand Slotted Shim is made of a corrosive resistant, stainless steel. These shims are made with a tab which allows for safe and easy installation and removal.&nbsp;
Any manufacturing plant that has numerous pumps and motors, which are maintained on a routine schedule, will benefit from them. Paper mills, refineries, utilities, food processors and large OEMs have experienced cost savings by using precut slotted shims. Industries that have developed predictive maintenance programs (using laser alignment and/or vibration analysis equipment) have found both time and cost savings with precut slotted shims.&nbsp;
What competitive advantage does Precision Brand® Slotted Shim offer?
Precision Brand realizes that quality and thickness tolerances are the two most important considerations when manufacturing shims. PBP publishes and guarantees thickness tolerances that are tighter than any other shim on the market and that are superior to the industry standards. Our material is produced using special gauge charts that require special millruns. This assures your customers of the tightest tolerances and the highest quality when using Precision Brand®.&nbsp;
Why are thickness tolerances so important?
Think about it. If you are using precision alignment equipment to determine the soft foot (gap) under a motor foot, you will want to install shims that are as close as possible to that gap’s thickness. With our guaranteed thickness they will be “right-on” when you do that final check. This will save time of having to do another measurement rotation.
Aren’t all precut slotted shims marked with an “actual” thickness?
No, the thickness marked on most shims is just nominally close. Nominally close can be defined as whatever thickness tolerance is acceptable to that manufacturer. This means that the thickness can vary considerably from what is marked on the shim. Using Precision Brand® shims gives your customers the advantage. Remember that PBP is the only shim manufacturer to publish and guarantee slotted shim tolerances.
What about shims that claim to be marked with an “exact” thickness like .098 instead of .100?
There are two things to remember when working with these shims. First, the off-size marking is probably not correct due to the variations that occur in the stainless steel rolling process. The only way this marking could be correct would be if each shim was measured and stamped individually. As you can realize, this is neither feasible nor economically possible for any shim manufacturer. Beware whenever you encounter a shim with a non-standard, “off-size” decimal thickness. Remember that these shims were originally intended to be “on-size” and ended up “off-size”. Second, when stacking numerous shims to make a shim pack, it is much easier to think in terms of “on-size”, closer tolerance shims. To illustrate this, let’s do two math problems:
Solve for X: 20+20+20+20+X=100 (on-size shims) OR Solve for X: 22+19+20+19+X=100 (off-size shims)
Working with “on-size” shims eliminates the time spent searching for that “perfect combination”.
How do I know that I am getting the best?
Prove it to yourself. Mic your shims with a micrometer or a caliper to determine the thickness (especially .050 and thicker!). Make sure to check in more than one spot to look for consistency throughout the shim. Compare these findings to what the shim is labeled. While you are checking, also look for burrs and crown (non-flatness). These two conditions can create false readings in the equipment that will lead to wasted shimming time. Put Precision Brand Slotted Shim to the test and I am sure that you will find it to be the best!
Product Description: Precut Slotted Shim
Material: 300 Series Stainless Steel
Size: A (2 Inch x 2 Inch)
Length A: 2 Inch
Thickness 0.001, 0.002, 0.003, 0.004, 0.005, 0.010, 0.015, 0.020, 0.025, 0.050, 0.075, 0.100 and 0.125 Inch
Groove G: 5/8 Inch
For Bolt Size: 5/8 UNC or UNF
Quantity Per Package: 260 Pieces (20 pieces for each thickness)
Packaging Weight: 4.96 kg

Ergomat

Southco

Others

DYMON

SCRUBS

IT Accessories

Machinery Accessories

Screw

Painting Tools

Hooks & Eyes

Drill Bits & Drill Bit Sets

Rubber Seals

Other Tools

Hose Clamp

Leland

buyerIntroduction

Precut Slotted Shim "a" Full Kit, 2 Inch X 2 Inch, 300 Series Stainless Steel, 260 Pieces

precut slotted shim "a" full kit, inch inch, 300 series stainless steel, 260 pieces kit lengkap beralur prapotong "a", inci inci, baja tahan karat seri 300, buah precision brand penuh berslot keluli siri keping brand/精密品牌 预切开槽垫片“a”全套套件，2 英寸 英寸，300 系列不锈钢，260 精密品牌

precut-slotted-shim-a-full-kit-2-inch-x-2-inch-300-series-stainless-steel-260-pieces

Precut Slotted Shim B Full Kit, 3 Inch X 3 Inch, 300 Series Stainless Steel, 260 Pieces, 42910

Precut Slotted Shim C Full Kit, 4 Inch X 4 Inch, 300 Series Stainless Steel, 260 Pieces, 42920

Precut Slotted Shim D Full Kit, 5 Inch X 5 Inch, 300 Series Stainless Steel, 260 Pieces, 42930

Precut Slotted Shim A Full Kit, 2 Inch X 2 Inch, 300 Series Stainless Steel, 260 Pieces, 42900

Size

Standard set collar attached with set screw

The inner ring of bearing can be held down by 30° chamfer

Hex Socket Set Screws (Recessed SUSXM7) - 2 Piece

<h3 class="md-block-header-three">Features:</h3><ul class="md-block-unordered-list-item"><li>Standard set collar attached with set screw</li><li>The inner ring of bearing can be held down by 30° chamfer</li><li>Can be used to fix sprockets and gears</li><li>Material is stainless steel</li></ul><h3 class="md-block-header-three">Specification:</h3><ul class="md-block-unordered-list-item"><li>Brand: Iwata</li><li>Product Type: Basic Shaft Collar</li><li>Material: Stainless Steel SUS304</li><li>Inner Diameter (φB): 12 mm</li><li>Width (L): 6 mm</li><li>Outer Diameter (φD): 20 mm</li><li>Tightening Screw (M): M4x4</li></ul><h3 class="md-block-header-three">Accessories:</h3><ul class="md-block-unordered-list-item"><li>Hex Socket Set Screws (Recessed SUSXM7) - 2 Piece</li></ul>

<h3>Features:</h3>
<ul>
<li>Standard set collar attached with set screw</li>
<li>The inner ring of bearing can be held down by 30° chamfer</li>
<li>Can be used to fix sprockets and gears</li>
<li>Material is stainless steel</li>
</ul>
<h3>Specification:</h3>
<ul>
<li>Brand: Iwata</li>
<li>Product Type: Basic Shaft Collar</li>
<li>Material: Stainless Steel SUS304</li>
<li>Inner Diameter (φB): 12 mm</li>
<li>Width (L): 6 mm</li>
<li>Outer Diameter (φD): 20 mm</li>
<li>Tightening Screw (M): M4x4</li>
</ul>
<h3>Accessories:</h3>
<ul>
<li>Hex Socket Set Screws (Recessed SUSXM7) - 2 Piece</li>
</ul>

Leland Tan

Iwata Stainless Steel Basic Shaft Collar 12mm X 6mm SC1206S

iwata stainless steel basic shaft collar 12mm x 6mm sc1206s ball bearings bearing kerah bebola iwata/岩田 县不锈钢基础轴环12mm 球轴承 岩田

iwata-stainless-steel-basic-shaft-collar-12mm-x-6mm-sc1206s

<h3 class="md-block-header-three">Features:</h3><ul class="md-block-unordered-list-item"><li>Standard set collar attached with set screw</li><li>The inner ring of bearing can be held down by 30° chamfer</li><li>Can be used to fix sprockets and gears</li><li>Material is stainless steel</li></ul><h3 class="md-block-header-three">Specification:</h3><ul class="md-block-unordered-list-item"><li>Brand: Iwata</li><li>Product Type: Basic Shaft Collar</li><li>Material: Stainless Steel SUS304</li><li>Inner Diameter (φB): 12 mm</li><li>Width (L): 12 mm</li><li>Outer Diameter (φD): 26 mm</li><li>Chamfer Diameter (φD1): 20 mm</li><li>Tightening Screw (M): M6x6</li></ul><h3 class="md-block-header-three">Accessories:</h3><ul class="md-block-unordered-list-item"><li>Hex Socket Set Screws (Recessed SUSXM7) - 2 Piece</li></ul>

<h3>Features:</h3>
<ul>
<li>Standard set collar attached with set screw</li>
<li>The inner ring of bearing can be held down by 30° chamfer</li>
<li>Can be used to fix sprockets and gears</li>
<li>Material is stainless steel</li>
</ul>
<h3>Specification:</h3>
<ul>
<li>Brand: Iwata</li>
<li>Product Type: Basic Shaft Collar</li>
<li>Material: Stainless Steel SUS304</li>
<li>Inner Diameter (φB): 12 mm</li>
<li>Width (L): 12 mm</li>
<li>Outer Diameter (φD): 26 mm</li>
<li>Chamfer Diameter (φD1): 20 mm</li>
<li>Tightening Screw (M): M6x6</li>
</ul>
<h3>Accessories:</h3>
<ul>
<li>Hex Socket Set Screws (Recessed SUSXM7) - 2 Piece</li>
</ul>