ACISION

Druck

FLUKE

HM Digital

PCE Instruments

RS Pro

Tenma

TENMARS

Testo

Vogel

Test & Measurement

test-measurement

Calibrators

calibrators

Distance Measurement

distance-measurement

Flow & PH Meters

flow-ph-meters

Multimeters

multimeters

Sound & Vibration Meters

sound-vibration-meters

Temperature Data Logger

temperature-data-logger

Technical Data Sheet (214.92KB) EN

MULTICOMP PRO

Analog Devices

MULTICOMP

Duratool

Surface Mount Resistors

Multilayer Ceramic Capacitors

Through Hole Resistors

Junction & Enclosure Box

Voltage Regulators

Voltage Supervisors & Monitors

Voltage References

Hook Up Wires

Circular Connectors

PCB Headers

Element14

buyerIntroduction

Tenma 72-2680 Sound Level Meter Calibrator, 94DB-114DB

tenma 72-2680 sound level meter calibrator, 94db-114db kalibrator pengukur tingkat suara 72-2680, vibration meters getaran bunyi 声级计校准器，94db-114db 声音和振动计 天马

tenma-72-2680-sound-level-meter-calibrator-94db-114db

For sound and noise measurements acc. to the international directives.

Used widely in devices for air-conditioning, aviation industry, environmental technology. 

Measuring range: 40-80 / 50-100 / 60-110 / 80-130 dBA / dBC

On/Off button, data memory for 4700 measurements, slow-/fast-button, clock- and calendar indicator

With tripod mounting screw on the rear side, autom. power off 

Large LCD display, 4-digit, with clear reading, battery indicator 

Frequency range 31.5 Hz ~ 8.5 KHz, A/C frequency weighting select switch, AC/DC out put 

Bar graph indicator with 50 dB scale, 1 dB step, with pre-select of min/max.-value 

Microphone ½ inch, electret condenser-microphone, with detachable foam ball for outside measuring 

Storage temperature -20°C ~ +70°C, operation temperature 0°C ~ +45°C, DC 6 V input port, AC analog output port 

Incl. 4x 1.5 V battery (type AA, art.-no. 60 9282), USB data cable, software, with operation manual

For sound and noise measurements acc. to the international directives.Used widely in devices for air-conditioning, aviation industry, environmental technology. With self-calibration.Comes with Calibration Certificate<h3 class="md-block-header-three">Technical Information</h3>Measuring range: 40-80 / 50-100 / 60-110 / 80-130 dBA / dBCResolution: 0.1 dBMax. total accuracy: +- 1.5 dBLinearity range: 50 dBDimension: 220 mm x 80 mm x 35 mm <ul class="md-block-unordered-list-item"><li>Rugged, polyamide housing material </li><li>On/Off button, data memory for 4700 measurements, slow-/fast-button, clock- and calendar indicator</li><li>With tripod mounting screw on the rear side, autom. power off </li><li>Large LCD display, 4-digit, with clear reading, battery indicator </li><li>Frequency range 31.5 Hz ~ 8.5 KHz, A/C frequency weighting select switch, AC/DC out put </li><li>Bar graph indicator with 50 dB scale, 1 dB step, with pre-select of min/max.-value </li><li>Microphone ½ inch, electret condenser-microphone, with detachable foam ball for outside measuring </li><li>Storage temperature -20°C ~ +70°C, operation temperature 0°C ~ +45°C, DC 6 V input port, AC analog output port </li><li>Incl. 4x 1.5 V battery (type AA, art.-no. 60 9282), USB data cable, software, with operation manual</li></ul>

For sound and noise measurements acc. to the international directives.
Used widely in devices for air-conditioning, aviation industry, environmental technology.&nbsp;
With self-calibration.
Comes with Calibration Certificate
<h3>Technical Information</h3>
Measuring range: 40-80 / 50-100 / 60-110 / 80-130 dBA / dBC
Resolution: 0.1 dB
Max. total accuracy: +- 1.5 dB
Linearity range: 50 dB
Dimension: 220 mm x 80 mm x 35 mm&nbsp;
<ul>
<li>Rugged, polyamide housing material&nbsp;</li>
<li>On/Off button, data memory for 4700 measurements, slow-/fast-button, clock- and calendar indicator</li>
<li>With tripod mounting screw on the rear side, autom. power off&nbsp;</li>
<li>Large LCD display, 4-digit, with clear reading, battery indicator&nbsp;</li>
<li>Frequency range 31.5 Hz ~ 8.5 KHz, A/C frequency weighting select switch, AC/DC out put&nbsp;</li>
<li>Bar graph indicator with 50 dB scale, 1 dB step, with pre-select of min/max.-value&nbsp;</li>
<li>Microphone ½ inch, electret condenser-microphone, with detachable foam ball for outside measuring&nbsp;</li>
<li>Storage temperature -20°C ~ +70°C, operation temperature 0°C ~ +45°C, DC 6 V input port, AC analog output port&nbsp;</li>
<li>Incl. 4x 1.5 V battery (type AA, art.-no. 60 9282), USB data cable, software, with operation manual</li>
</ul>

Kho Zhi Gang

Digi-Pas

Level Measurement

Other Measuring Tools

Other Tools

KHO ZHI GANG

Vogel Digital Sound Level Meter W Calibration Certificate

vogel digital sound level meter calibration certificate sertifikat kalibrasi vibration meters pengukur suara getaran sijil penentukuran paras bunyi vogel/沃格尔 数字声级计 校准证书 声音和振动计 沃格尔

vogel-digital-sound-level-meter-w-calibration-certificate

Datasheet

RS PRO User Manual

Siemens

STANLEY

DEUTSCH

Facom

RAPID

SCHNEIDER ELECTRIC

ECLIPSE TOOLS

Screw

O Ring

Plugs & Connector 

Bolts

Panel Mount Indicators 

Button Switch

Electrical Wire 

Aluminium Capacitors

RS Components ETH SG

Rs Pro 1232229 Sound Level Calibrator, ±0.5 Db Accuracy, 94 Db, 114 Db Output, 1 In, 1/2 In, 1/4 in Microphone

rs pro 1232229 sound level calibrator, ±0.5 db accuracy, 94 db, 114 output, in, 1/2 1/4 microphone kalibrator tingkat suara, akurasi ±0,5 output mikrofon vibration meters pengukur suara getaran penentukuran aras bunyi, ketepatan, meter bunyi 声级校准器，±0.5 精度，94 db、114 输出，1 in、1/2 in、1/4 英寸麦克风 声音和振动计 rs专业版

rs-pro-1232229-sound-level-calibrator-0-5-db-accuracy-94-db-114-db-output-1-in-1-2-in-1-4-in-microphone

PCE Instruments PCE-322A Class Ii Decibel Meter

PCE-322A is a handheld, portable, professional Class II sound level meter or decibel meter with built-in data-logging or data-recording functionality for environmental testing. Thus, PCE-322A is ideal for real-time noise measurement as well as for long-term noise exposure monitoring over time. A mini tripod is included in the delivery contents, as is a wind noise suppressor. The recorded decibel readings help users determine if and what protective measures need to be taken to ensure overall health, safety and productivity in industrial, commercial, occupational, educational and residential environments. The sound level meter can also be used to evaluate acoustics for audio installations.

The sound level meter can be connected to a PC via the USB port. This allows the recorded decibel readings to be transferred to a PC for detailed analysis using Microsoft Excel or the included downloadable proprietary software. The sound level meter also features an millivolt analog output for connecting to a frequency analyzer or X-Y shaft recorder.

 – IEC 61672-1 Class II sound level meter
– USB port for data transfer
– Memory stores up to 32,700 readings
– Fast and slow time weighting
– A and C frequency weightings
– Max, min, hold and alarm functions
– Date- and time-stamped measurements
– Analog millivolt output
– Heavy-duty ABS plastic enclosure
– Large, easy-to-read, 4-digit LCD screen
– Power-saving automatic shutoff > 15 min. inactivity
– Battery allows approx. 30 hours continuous use
– ISO calibration available as an option – see accessories for details
– Tripod mount with 1/4-20 UNC thread 

<h3 class="md-block-header-three">PCE Instruments PCE-322A Class Ii Decibel Meter</h3>PCE-322A is a handheld, portable, professional Class II sound level meter or decibel meter with built-in data-logging or data-recording functionality for environmental testing. Thus, PCE-322A is ideal for real-time noise measurement as well as for long-term noise exposure monitoring over time. A mini tripod is included in the delivery contents, as is a wind noise suppressor. The recorded decibel readings help users determine if and what protective measures need to be taken to ensure overall health, safety and productivity in industrial, commercial, occupational, educational and residential environments. The sound level meter can also be used to evaluate acoustics for audio installations.The sound level meter can be connected to a PC via the USB port. This allows the recorded decibel readings to be transferred to a PC for detailed analysis using Microsoft Excel or the included downloadable proprietary software. The sound level meter also features an millivolt analog output for connecting to a frequency analyzer or X-Y shaft recorder. – IEC 61672-1 Class II sound level meter – USB port for data transfer – Memory stores up to 32,700 readings – Fast and slow time weighting – A and C frequency weightings – Max, min, hold and alarm functions – Date- and time-stamped measurements – Analog millivolt output – Heavy-duty ABS plastic enclosure – Large, easy-to-read, 4-digit LCD screen – Power-saving automatic shutoff &gt; 15 min. inactivity – Battery allows approx. 30 hours continuous use – ISO calibration available as an option – see accessories for details – Tripod mount with 1/4-20 UNC thread

<h3>PCE Instruments PCE-322A Class Ii Decibel Meter</h3>
PCE-322A is a handheld, portable, professional Class II sound level meter or decibel meter with built-in data-logging or data-recording functionality for environmental testing. Thus, PCE-322A is ideal for real-time noise measurement as well as for long-term noise exposure monitoring over time. A mini tripod is included in the delivery contents, as is a wind noise suppressor. The recorded decibel readings help users determine if and what protective measures need to be taken to ensure overall health, safety and productivity in industrial, commercial, occupational, educational and residential environments. The sound level meter can also be used to evaluate acoustics for audio installations.
The sound level meter can be connected to a PC via the USB port. This allows the recorded decibel readings to be transferred to a PC for detailed analysis using Microsoft Excel or the included downloadable proprietary software. The sound level meter also features an millivolt analog output for connecting to a frequency analyzer or X-Y shaft recorder.
&nbsp;– IEC 61672-1 Class II sound level meter 
– USB port for data transfer 
– Memory stores up to 32,700 readings 
– Fast and slow time weighting 
– A and C frequency weightings 
– Max, min, hold and alarm functions 
– Date- and time-stamped measurements 
– Analog millivolt output 
– Heavy-duty ABS plastic enclosure 
– Large, easy-to-read, 4-digit LCD screen 
– Power-saving automatic shutoff &gt; 15 min. inactivity 
– Battery allows approx. 30 hours continuous use 
– ISO calibration available as an option – see accessories for details 
– Tripod mount with 1/4-20 UNC thread&nbsp;

Extech

Center

TRIPLETT

MEGGER

AMPROBE

Fluke Networks

Piecal

Electrical Power Testing

Clamp Meters

Industrial Thermometer

Humidity & Temperature

Thermal Imaging Cameras

Multimeter Leads

Light Meters & Imaging

CETM

Pce Instruments PCE-322A Class Ii Decibel Meter

pce instruments pce-322a class ii decibel meter alat pengukur desibel kelas sound vibration meters suara getaran bunyi instruments/四氯乙烯仪器 二级分贝计 声音和振动计 四氯乙烯仪器

pce-instruments-pce-322a-class-ii-decibel-meter

Model: DPI 611
Accuracy: 0.025% FS
Pressure range:
- DPI611-05G for -1 to 1 bar / -14.5 to 15 psi gauge range 
- DPI611-07G for -1 to 2 bar / -14.5 to 30 psi gauge range 
- DPI611-10G for -1 to 7 bar / -14.5 to 100 psi gauge range 
- DPI611-11G for -1 to 10 bar / -14.5 to 150 psi gauge range 
- DPI611-13G for -1 to 20 bar / -14.5 to 300 psi gauge range 


This fully self-contained pressure test and calibration system combines pressure generation, signal measurement and loop power to provide all the convenience of the Druck DPI 610/615 and yet it’s half the size, twice as accurate and easier to use.  

Building on the technical legacy and more than three decades of experience in pressure measurement and calibration, the DPI 611 provides all the convenience and reliability of a true “Druck,” yet offers twice the performance in a product half the size. 
• 50% smaller and 33% lighter than the DPI 610 
• Generates 0 to 20 bar/300 psi in less than 30 seconds 
• Creates 95% vacuum 
• Pressure measurement is twice as accurate 
• Three times better electrical accuracy 
• Simplified touch screen interface with application DASHBOARD, quick TASK selection and FAVOURITES storage 
• Fast, three touch set-up for any application 
• Calculates PASS/FAIL errors, documents results and interfaces with calibration software 

The innovative design of the DPI 611 pressure system can only achieve efficient generation and precise control through the use of carefully selected materials with high tolerance machining and perfect finishes. 

The choice of case material and precision moulding ensures that the DPI 611 is both rugged and weatherproof. 

State-of-the-art analogue and digital microelectronics contribute both accuracy and processing power to provide a class leading pressure and electrical capability with a unique simple-to-use interface.  

With the DPI 611 you can generate from 95% vacuum to 20 bar/300 psi pneumatic pressure. A simple selector lets you convert from vacuum to pressure and with a few stokes of the pump, you will generate the required pressure. Fine adjustment is made with the built-in volume adjuster and falling calibration points are achieved with the precision vent valve. 

Generates 0 to 20 bar in less than 30 seconds 

Pressure measurement is twice as accurate 

Simplified touch screen interface with application DASHBOARD, quick TASK selection and FAVOURITES storage 

Fast, three touch set-up for any application 

The electrical connection for measuring are mA, mV and V

Model: DPI 611 Accuracy: 0.025% FS Pressure range: - DPI611-05G for -1 to 1 bar / -14.5 to 15 psi gauge range - DPI611-07G for -1 to 2 bar / -14.5 to 30 psi gauge range - DPI611-10G for -1 to 7 bar / -14.5 to 100 psi gauge range - DPI611-11G for -1 to 10 bar / -14.5 to 150 psi gauge range - DPI611-13G for -1 to 20 bar / -14.5 to 300 psi gauge range This fully self-contained pressure test and calibration system combines pressure generation, signal measurement and loop power to provide all the convenience of the Druck DPI 610/615 and yet it’s half the size, twice as accurate and easier to use. Building on the technical legacy and more than three decades of experience in pressure measurement and calibration, the DPI 611 provides all the convenience and reliability of a true “Druck,” yet offers twice the performance in a product half the size. • 50% smaller and 33% lighter than the DPI 610 • Generates 0 to 20 bar/300 psi in less than 30 seconds • Creates 95% vacuum • Pressure measurement is twice as accurate • Three times better electrical accuracy • Simplified touch screen interface with application DASHBOARD, quick TASK selection and FAVOURITES storage • Fast, three touch set-up for any application • Calculates PASS/FAIL errors, documents results and interfaces with calibration software The innovative design of the DPI 611 pressure system can only achieve efficient generation and precise control through the use of carefully selected materials with high tolerance machining and perfect finishes. The choice of case material and precision moulding ensures that the DPI 611 is both rugged and weatherproof. State-of-the-art analogue and digital microelectronics contribute both accuracy and processing power to provide a class leading pressure and electrical capability with a unique simple-to-use interface. With the DPI 611 you can generate from 95% vacuum to 20 bar/300 psi pneumatic pressure. A simple selector lets you convert from vacuum to pressure and with a few stokes of the pump, you will generate the required pressure. Fine adjustment is made with the built-in volume adjuster and falling calibration points are achieved with the precision vent valve. Features &amp; Benefits<ul class="md-block-unordered-list-item"><li>50% smaller and 33% lighter than DPI 610</li><li>Generates 0 to 20 bar in less than 30 seconds </li><li>Creates 95% vacuum </li><li>Pressure measurement is twice as accurate </li><li>Three times better electrical accuracy </li><li>Simplified touch screen interface with application DASHBOARD, quick TASK selection and FAVOURITES storage </li><li>Fast, three touch set-up for any application </li><li>The electrical connection for measuring are mA, mV and V</li></ul>What&#x27;s included?<ul class="md-block-unordered-list-item"><li>Test Leads</li><li>Hand Strap</li><li>G1/8 female and 1/8 NPT female adaptors</li><li>Calibration certificate and user guide</li><li>Alkaline batteries x 8 AA</li></ul>

Model: DPI 611 
Accuracy: 0.025% FS 
Pressure range: 
- DPI611-05G for -1 to 1 bar / -14.5 to 15 psi gauge range 
- DPI611-07G for -1 to 2 bar / -14.5 to 30 psi gauge range 
- DPI611-10G for -1 to 7 bar / -14.5 to 100 psi gauge range 
- DPI611-11G for -1 to 10 bar / -14.5 to 150 psi gauge range 
- DPI611-13G for -1 to 20 bar / -14.5 to 300 psi gauge range 

This fully self-contained pressure test and calibration system combines pressure generation, signal measurement and loop power to provide all the convenience of the Druck DPI 610/615 and yet it’s half the size, twice as accurate and easier to use.&nbsp;&nbsp;
Building on the technical legacy and more than three decades of experience in pressure measurement and calibration, the DPI 611 provides all the convenience and reliability of a true “Druck,” yet offers twice the performance in a product half the size. 
• 50% smaller and 33% lighter than the DPI 610 
• Generates 0 to 20 bar/300 psi in less than 30 seconds 
• Creates 95% vacuum 
• Pressure measurement is twice as accurate 
• Three times better electrical accuracy 
• Simplified touch screen interface with application DASHBOARD, quick TASK selection and FAVOURITES storage 
• Fast, three touch set-up for any application 
• Calculates PASS/FAIL errors, documents results and interfaces with calibration software&nbsp;
The innovative design of the DPI 611 pressure system can only achieve efficient generation and precise control through the use of carefully selected materials with high tolerance machining and perfect finishes.&nbsp;
The choice of case material and precision moulding ensures that the DPI 611 is both rugged and weatherproof.&nbsp;
State-of-the-art analogue and digital microelectronics contribute both accuracy and processing power to provide a class leading pressure and electrical capability with a unique simple-to-use interface.&nbsp;&nbsp;
With the DPI 611 you can generate from 95% vacuum to 20 bar/300 psi pneumatic pressure. A simple selector lets you convert from vacuum to pressure and with a few stokes of the pump, you will generate the required pressure. Fine adjustment is made with the built-in volume adjuster and falling calibration points are achieved with the precision vent valve.&nbsp;
Features &amp; Benefits
<ul>
<li>50% smaller and 33% lighter than DPI 610</li>
<li>Generates 0 to 20 bar in less than 30 seconds&nbsp;</li>
<li>Creates 95% vacuum&nbsp;</li>
<li>Pressure measurement is twice as accurate&nbsp;</li>
<li>Three times better electrical accuracy&nbsp;</li>
<li>Simplified touch screen interface with application DASHBOARD, quick TASK selection and FAVOURITES storage&nbsp;</li>
<li>Fast, three touch set-up for any application&nbsp;</li>
<li>The electrical connection for measuring are mA, mV and V</li>
</ul>
What's included?
<ul>
<li>Test Leads</li>
<li>Hand Strap</li>
<li>G1/8 female and 1/8 NPT female adaptors</li>
<li>Calibration certificate and user guide</li>
<li>Alkaline batteries x 8 AA</li>
</ul>

DPI611

Adelene

Others

Adelene Teow

Druck Pressure Calibrator - Dpi 611

druck pressure calibrator dpi 611 kalibrator tekanan calibrators druck/德鲁克 压力校准器-dpi 德鲁克

druck-pressure-calibrator-dpi-611

3 different parameters of velocity, acceleration and displacement in 1 display.

Specially designed for easy on site vibration measurement of all rotating machinery for quality control, commissioning, and predictive maintenance purposes.

Wide frequency range (10Hz~10kHz) in acceleration mode.

Use USB/RS-232 data output to connect with PC.

<h3 class="md-block-header-three">Acision 3-Channel Vibration Meter VM63</h3><ul class="md-block-unordered-list-item"><li>3 different parameters of velocity, acceleration and displacement in 1 display.</li><li>Specially designed for easy on site vibration measurement of all rotating machinery for quality control, commissioning, and predictive maintenance purposes.</li><li>Wide frequency range (10Hz~10kHz) in acceleration mode.</li><li>Bearing condition monitoring function.</li><li>Use USB/RS-232 data output to connect with PC.</li><li>Provide Bluetooth data output choice.</li></ul>

<h3>Acision 3-Channel Vibration Meter VM63</h3>
<ul>
<li>3 different parameters of velocity, acceleration and displacement in 1 display.</li>
<li>Specially designed for easy on site vibration measurement of all rotating machinery for quality control, commissioning, and predictive maintenance purposes.</li>
<li>Wide frequency range (10Hz~10kHz) in acceleration mode.</li>
<li>Bearing condition monitoring function.</li>
<li>Use USB/RS-232 data output to connect with PC.</li>
<li>Provide Bluetooth data output choice.</li>
</ul>

Acision-VM63-Vibration-meter-CETM-min

Acision VM63 3-CHANNEL Vibration Meter

acision vm63 3-channel vibration meter pengukur getaran sound meters suara 3-saluran bunyi acision/比赛 通道振动计 声音和振动计 比赛

acision-vm63-3-channel-vibration-meter

Fluke 87V Industrial Multimeter (Include Calibration Service) 

-Easy-access door for fast battery changes without breaking the calibration seal
-Analog bar graph for fast changing or unstable signals
-Large digit display with bright, two-level backlight for easier reading in low light
-Touch Hold keeps readings on display even after removing probes

The 87V lets you identify complex electrical problems fast. It supports accurate measurements on VFDs using a low-pass filter. The meter also captures intermittents as fast as 250 µS using Peak Capture. High-frequency, high-energy noise generated by large drive systems is blocked from your measurements with specially designed shielding.

Built to highest safety standards
All the inputs in the 87V are updated to the third edition of the EN 61010-1 to CAT III 1000 V and CAT IV 600 V. The meter is designed to withstand spikes of more than 8000 V. You also benefit from an audible Input Alert warning if the test leads are placed in the incorrect input jacks for the measurement being made.

Removable holster with built in test lead and probe storage for convenience
The 87V has a removeable holster that also holds a test probe during testing for easier viewing. Relative mode lets you remove test lead resistance, improving accuracy of low-resistance measurements. To make your life even easier, the 87V fits into an optional magnetic hanger for easy set-up and viewing while freeing your hands for other tasks.

<h3 class="md-block-header-three">Fluke 87V Industrial Multimeter (Include Calibration Service) </h3>-Easy-access door for fast battery changes without breaking the calibration seal -Analog bar graph for fast changing or unstable signals -Large digit display with bright, two-level backlight for easier reading in low light -Touch Hold keeps readings on display even after removing probesThe 87V lets you identify complex electrical problems fast. It supports accurate measurements on VFDs using a low-pass filter. The meter also captures intermittents as fast as 250 µS using Peak Capture. High-frequency, high-energy noise generated by large drive systems is blocked from your measurements with specially designed shielding.Built to highest safety standards All the inputs in the 87V are updated to the third edition of the EN 61010-1 to CAT III 1000 V and CAT IV 600 V. The meter is designed to withstand spikes of more than 8000 V. You also benefit from an audible Input Alert warning if the test leads are placed in the incorrect input jacks for the measurement being made.Removable holster with built in test lead and probe storage for convenience The 87V has a removeable holster that also holds a test probe during testing for easier viewing. Relative mode lets you remove test lead resistance, improving accuracy of low-resistance measurements. To make your life even easier, the 87V fits into an optional magnetic hanger for easy set-up and viewing while freeing your hands for other tasks.

<h3>Fluke 87V Industrial Multimeter (Include Calibration Service)&nbsp;</h3>
-Easy-access door for fast battery changes without breaking the calibration seal 
-Analog bar graph for fast changing or unstable signals 
-Large digit display with bright, two-level backlight for easier reading in low light 
-Touch Hold keeps readings on display even after removing probes
The 87V lets you identify complex electrical problems fast. It supports accurate measurements on VFDs using a low-pass filter. The meter also captures intermittents as fast as 250 µS using Peak Capture. High-frequency, high-energy noise generated by large drive systems is blocked from your measurements with specially designed shielding.
Built to highest safety standards 
All the inputs in the 87V are updated to the third edition of the EN 61010-1 to CAT III 1000 V and CAT IV 600 V. The meter is designed to withstand spikes of more than 8000 V. You also benefit from an audible Input Alert warning if the test leads are placed in the incorrect input jacks for the measurement being made.
Removable holster with built in test lead and probe storage for convenience 
The 87V has a removeable holster that also holds a test probe during testing for easier viewing. Relative mode lets you remove test lead resistance, improving accuracy of low-resistance measurements. To make your life even easier, the 87V fits into an optional magnetic hanger for easy set-up and viewing while freeing your hands for other tasks.

Data Sheet

Fluke 87V Industrial Multimeter (include Calibration Service)

fluke 87v industrial multimeter (include calibration service) industri (termasuk layanan kalibrasi) multimeters perkhidmatan penentukuran) fluke/福禄克 工业万用表（含校准服务） 万用表 福禄克

fluke-87v-industrial-multimeter-include-calibration-service

Matthew Lee

Fluke Calibration 1524 Handheld Thermometer Readout (with 2 Probes)

fluke calibration 1524 handheld thermometer readout (with probes) hasil pembacaan termometer genggam (dengan probe) temperature data logger pegang tangan fluke/福禄克 手持式温度计读数器（带 个探头） 福禄克

fluke-calibration-1524-handheld-thermometer-readout-with-2-probes

Testo 174T Set Mini data logger Temperature with accredited calibration certificate 

The testo 174T mini temperature data logger helps you comply with the specified temperature ranges. It records the temperature values reliably and thus ensures uninterrupted measurement data recording and documentation. 

You can save up to 16 000 readings with the testo 174T temperature data logger securely. Because measurement data you have saved will not be lost even when the battery is empty or being replaced. This means a high level of data security is guaranteed. You can easily and quickly read the current temperature measuring value on its large display, along with any possible violations of limit values. The integrated NTC sensor stands for a high level of accuracy. Its large measuring range, from -30 to +70 °C, and its compact design make the testo 174T temperature data logger a competent support for virtually every kind of temperature recording.

The testo 174T mini temperature data logger meets the requirements of EN 12830 and is HACCP-compliant, as well as having international HACCP certification, which means it is ideally suited for measurements in the food industry (e.g. for storage temperature measurement). Particularly practical: the data logger has water spray and jet protection according to IP 65. This enables it to be left in the measuring location even when warehouses are being cleaned. The temperature data logger is also suitable for temperature control in refrigerators or cold stores, because it can be used at temperatures down to -30 °C.

Features: 
- High data security 
- Large display 
- Display of current temperature value 
- Measurement data store for 16,000 measurement values 
- Fast data analysis and documentation on a PC
- HACCP-compliant and certified according to EN 12830
- Waterproof according to IP65 

NTC 
Measuring range: -30 to +70 °C 
Accuracy ±1 digit: ±0.5 °C (-30 to +70 °C) 
Resolution: 0.1 °C  
Battery life: 500 days (15 min measuring cycle, +25 °C) 
Measuring rate: 1 min - 24 h
Memory: 16.000 readings 

Why Certified? 
– Unit comes with an accredited calibration certificate 
– No Downtime 
– Time and Cost savings 


Specifications of Certified Instruments - Testo 174T Set Mini data logger Temperature with accredited calibration certificate.  

Note:  Calibration Point for 174T is set at -20, 0 and 20°C. 
Kindly specify your Company Name and Address to be printed on the Calibration Report when placing order.  

Order Code: 0572 1740 01 (174T-USB)Testo 174T Set Mini data logger Temperature with accredited calibration certificate The testo 174T mini temperature data logger helps you comply with the specified temperature ranges. It records the temperature values reliably and thus ensures uninterrupted measurement data recording and documentation. You can save up to 16 000 readings with the testo 174T temperature data logger securely. Because measurement data you have saved will not be lost even when the battery is empty or being replaced. This means a high level of data security is guaranteed. You can easily and quickly read the current temperature measuring value on its large display, along with any possible violations of limit values. The integrated NTC sensor stands for a high level of accuracy. Its large measuring range, from -30 to +70 °C, and its compact design make the testo 174T temperature data logger a competent support for virtually every kind of temperature recording.The testo 174T mini temperature data logger meets the requirements of EN 12830 and is HACCP-compliant, as well as having international HACCP certification, which means it is ideally suited for measurements in the food industry (e.g. for storage temperature measurement). Particularly practical: the data logger has water spray and jet protection according to IP 65. This enables it to be left in the measuring location even when warehouses are being cleaned. The temperature data logger is also suitable for temperature control in refrigerators or cold stores, because it can be used at temperatures down to -30 °C.Features: - High data security - Large display - Display of current temperature value - Measurement data store for 16,000 measurement values - Fast data analysis and documentation on a PC - HACCP-compliant and certified according to EN 12830 - Waterproof according to IP65 NTC Measuring range: -30 to +70 °C Accuracy ±1 digit: ±0.5 °C (-30 to +70 °C) Resolution: 0.1 °C Battery life: 500 days (15 min measuring cycle, +25 °C) Measuring rate: 1 min - 24 h Memory: 16.000 readings Why Certified? – Unit comes with an accredited calibration certificate – No Downtime – Time and Cost savings Specifications of Certified Instruments - Testo 174T Set Mini data logger Temperature with accredited calibration certificate. Note: Calibration Point for 174T is set at -20, 0 and 20°C. Kindly specify your Company Name and Address to be printed on the Calibration Report when placing order.

Order Code: 0572 1740 01 (174T-USB)
Testo 174T Set Mini data logger Temperature with accredited calibration certificate&nbsp;
The testo 174T mini temperature data logger helps you comply with the specified temperature ranges. It records the temperature values reliably and thus ensures uninterrupted measurement data recording and documentation.&nbsp;
You can save up to 16 000 readings with the testo 174T temperature data logger securely. Because measurement data you have saved will not be lost even when the battery is empty or being replaced. This means a high level of data security is guaranteed. You can easily and quickly read the current temperature measuring value on its large display, along with any possible violations of limit values. The integrated NTC sensor stands for a high level of accuracy. Its large measuring range, from -30 to +70 °C, and its compact design make the testo 174T temperature data logger a competent support for virtually every kind of temperature recording.
The testo 174T mini temperature data logger meets the requirements of EN 12830 and is HACCP-compliant, as well as having international HACCP certification, which means it is ideally suited for measurements in the food industry (e.g. for storage temperature measurement). Particularly practical: the data logger has water spray and jet protection according to IP 65. This enables it to be left in the measuring location even when warehouses are being cleaned. The temperature data logger is also suitable for temperature control in refrigerators or cold stores, because it can be used at temperatures down to -30 °C.
Features: 
- High data security 
- Large display 
- Display of current temperature value 
- Measurement data store for 16,000 measurement values 
- Fast data analysis and documentation on a PC 
- HACCP-compliant and certified according to EN 12830 
- Waterproof according to IP65 
 
NTC 
Measuring range: -30 to +70 °C 
Accuracy ±1 digit: ±0.5 °C (-30 to +70 °C) 
Resolution: 0.1 °C 
Battery life: 500 days (15 min measuring cycle, +25 °C) 
Measuring rate: 1 min - 24 h 
Memory: 16.000 readings&nbsp;
Why Certified? 
– Unit comes with an accredited calibration certificate 
– No Downtime 
– Time and Cost savings 
 
 
Specifications of Certified Instruments - Testo 174T Set Mini data logger Temperature with accredited calibration certificate. 
 
Note: Calibration Point for 174T is set at -20, 0 and 20°C. 
Kindly specify your Company Name and Address to be printed on the Calibration Report when placing order.

Testo 174T-USB

Baker Hughes

Senze Instruments

ADDITEL

Daihan

Isuzu

Weight, Force & Pressure Gauges

Hand Pumps

Pressure Measurement

HVAC Field Devices

Pumps Accessories

Testo 174T Set Mini Data Logger Temperature With Accredited Calibration Certificate

testo 174t set mini data logger temperature accredited calibration certificate suhu dengan sertifikat kalibrasi terakreditasi tetapkan sijil penentukuran bertauliah testo/德图 迷你温度数据记录仪，附有认证校准证书 德图

testo-174t-set-mini-data-logger-temperature-with-accredited-calibration-certificate

Order Code: 0572 1741 01 (174H-USB)
Testo 174H Set Mini data logger Temperature and humidity with accredited calibration certificate


The testo 174 H allows you to monitor temperature and humidity sensitive goods – including foods, archives or metal parts that are susceptible to surface rust – or carry out discreet humidity checks in buildings to ensure that the property is being properly looked after by the tenants. 

The testo 174 H mini data logger has built-in longlife sensors that can measure the temperature and humidity of the surrounding environment, a memory for up to 16 000 measurements and an easy-to-read display that shows the current reading as well as any breached thresholds.  Practical: The standard batteries (2x CR 2032) included in the scope of supply can be easily replaced by the user.


Features:
- Long-term stable humidity sensor
- High data security
- Large display
- Display of current temperature or humidity values
- Measurement data store for 16,000 measurement values
- Fast data analysis and documentation on a PC


NTC
Measuring range: -20 to +70 °C
Accuracy ±1 digit: ±0.5 °C (-20 to +70 °C)
Resolution: 0.1 °C


Testo humid. sensor, cap.
Measuring range: 0 to 100 %RH*
Accuracy ±1 digit: ±3 %RH (2 to 98 %RH)
±0.03 %RH/K
Resolution: 0.1 %RH

* Not for condensing atmospheres. For continuous use in high humidity (>80 %RH at ≤30 °C for >12 h, >60 %RH at >30 °C for >12h)

Memory: 16.000 readings
Measuring rate: 1 min - 24 h
Channels: 2 x internal


Why Certified? 
– Unit comes with an accredited calibration certificate
– No Downtime
– Time and Cost savings 


Specifications of Certified Instruments - Testo 174H Set Mini data logger Temperature and humidity with  accredited calibration certificate.  

Note:  Calibration Point for 174H is set at 23°C and 55% RH. 
Kindly specify your Company Name and Address to be printed on the Calibration Report when placing order. 


Order Code: 0572 1741 01 (174H-USB) Testo 174H Set Mini data logger Temperature and humidity with accredited calibration certificate The testo 174 H allows you to monitor temperature and humidity sensitive goods – including foods, archives or metal parts that are susceptible to surface rust – or carry out discreet humidity checks in buildings to ensure that the property is being properly looked after by the tenants. The testo 174 H mini data logger has built-in longlife sensors that can measure the temperature and humidity of the surrounding environment, a memory for up to 16 000 measurements and an easy-to-read display that shows the current reading as well as any breached thresholds. Practical: The standard batteries (2x CR 2032) included in the scope of supply can be easily replaced by the user. Features: - Long-term stable humidity sensor - High data security - Large display - Display of current temperature or humidity values - Measurement data store for 16,000 measurement values - Fast data analysis and documentation on a PC NTC Measuring range: -20 to +70 °C Accuracy ±1 digit: ±0.5 °C (-20 to +70 °C) Resolution: 0.1 °C Testo humid. sensor, cap. Measuring range: 0 to 100 %RH* Accuracy ±1 digit: ±3 %RH (2 to 98 %RH) ±0.03 %RH/K Resolution: 0.1 %RH * Not for condensing atmospheres. For continuous use in high humidity (&gt;80 %RH at ≤30 °C for &gt;12 h, &gt;60 %RH at &gt;30 °C for &gt;12h) Memory: 16.000 readings Measuring rate: 1 min - 24 h Channels: 2 x internal Why Certified? – Unit comes with an accredited calibration certificate – No Downtime – Time and Cost savings Specifications of Certified Instruments - Testo 174H Set Mini data logger Temperature and humidity with accredited calibration certificate. Note: Calibration Point for 174H is set at 23°C and 55% RH. Kindly specify your Company Name and Address to be printed on the Calibration Report when placing order.

Order Code: 0572 1741 01 (174H-USB) 
Testo 174H Set Mini data logger Temperature and humidity with accredited calibration certificate
 
The testo 174 H allows you to monitor temperature and humidity sensitive goods – including foods, archives or metal parts that are susceptible to surface rust – or carry out discreet humidity checks in buildings to ensure that the property is being properly looked after by the tenants. 
 
The testo 174 H mini data logger has built-in longlife sensors that can measure the temperature and humidity of the surrounding environment, a memory for up to 16 000 measurements and an easy-to-read display that shows the current reading as well as any breached thresholds. Practical: The standard batteries (2x CR 2032) included in the scope of supply can be easily replaced by the user.
 
Features: 
- Long-term stable humidity sensor 
- High data security 
- Large display 
- Display of current temperature or humidity values 
- Measurement data store for 16,000 measurement values 
- Fast data analysis and documentation on a PC 
 
 
NTC 
Measuring range: -20 to +70 °C 
Accuracy ±1 digit: ±0.5 °C (-20 to +70 °C) 
Resolution: 0.1 °C 
 
 
Testo humid. sensor, cap. 
Measuring range: 0 to 100 %RH* 
Accuracy ±1 digit: ±3 %RH (2 to 98 %RH) 
±0.03 %RH/K 
Resolution: 0.1 %RH 
 
* Not for condensing atmospheres. For continuous use in high humidity (&gt;80 %RH at ≤30 °C for &gt;12 h, &gt;60 %RH at &gt;30 °C for &gt;12h) 
 
Memory: 16.000 readings 
Measuring rate: 1 min - 24 h 
Channels: 2 x internal 
 
 
Why Certified? 
– Unit comes with an accredited calibration certificate 
– No Downtime 
– Time and Cost savings 
 
 
Specifications of Certified Instruments - Testo 174H Set Mini data logger Temperature and humidity with accredited calibration certificate. 
 
Note: Calibration Point for 174H is set at 23°C and 55% RH. 
Kindly specify your Company Name and Address to be printed on the Calibration Report when placing order.

Testo174H-USB

Air Quality Meters

Meteorological Instrumentation & Equipment

Testo 174H Set Mini Data Logger Temperature and Humidity With Accredited Calibration Certificate

testo 174h set mini data logger temperature humidity accredited calibration certificate suhu dan kelembaban dengan sertifikat kalibrasi terakreditasi kelembapan sijil penentukuran bertauliah testo/德图 迷你数据记录仪，带校准证书，温度和湿度 德图

testo-174h-set-mini-data-logger-temperature-and-humidity-with-accredited-calibration-certificate

Waterproof Professional Series pH/EC/TDS/Temp Meter Pro Kit

 The COM-300 digital water quality meter is a professional grade level pH/EC/TDS/Temp meter ideal for all water quality testing, hydroponics, water purification applications, wastewater regulation, aquaculture, colloidal silver, labs & scientific testing, pools & spas, ecology testing, boilers & cooling towers, water treatment and more. Now, come in compact portable case.

The Pro Kit includes calibration solutions as well to make ensure your testing is always on the point.

Application: Aquaculture, Aquarium, Drinking Water, Food & Beverage, Hydroponics, Industrial, Pool/Spa, Water Treatment

Measures Potential Hydrogen (pH), Electrical Conductivity (EC), Total Dissolved Solids (TDS), Salinity and Temperature

Five scales: pH, µS, mS, ppm 0.5 (NaCl) Scale & 0.7 (442™) Scale

Automatic Temperature Compensation (ATC) using three temperature coefficients

Digital Calibration (push button) to any point within the meter’s range

Auto-off function, data-hold function and low-battery indicator

Display: large and easy-to-read LCD screen includes simultaneous temperature reading

Includes translucent cap, 2 (AAA) alkaline batteries, pH 4 & 7 calibration solutions, CP-1000 solution, pH storage solution and lanyard

<h1 class="md-block-header-one">HM Digital COM-300PK </h1>Waterproof Professional Series pH/EC/TDS/Temp Meter Pro Kit The COM-300 digital water quality meter is a professional grade level pH/EC/TDS/Temp meter ideal for all water quality testing, hydroponics, water purification applications, wastewater regulation, aquaculture, colloidal silver, labs &amp; scientific testing, pools &amp; spas, ecology testing, boilers &amp; cooling towers, water treatment and more. Now, come in compact portable case.The Pro Kit includes calibration solutions as well to make ensure your testing is always on the point.Application: Aquaculture, Aquarium, Drinking Water, Food &amp; Beverage, Hydroponics, Industrial, Pool/Spa, Water TreatmentFeatures:<ul class="md-block-unordered-list-item"><li>Measures Potential Hydrogen (pH), Electrical Conductivity (EC), Total Dissolved Solids (TDS), Salinity and Temperature</li><li>Five scales: pH, µS, mS, ppm 0.5 (NaCl) Scale &amp; 0.7 (442™) Scale</li><li>Automatic Temperature Compensation (ATC) using three temperature coefficients</li><li>Waterproof housing (IP-67 rating)</li><li>Digital Calibration (push button) to any point within the meter’s range</li><li>Auto-off function, data-hold function and low-battery indicator</li><li>Display: large and easy-to-read LCD screen includes simultaneous temperature reading</li><li>Replaceable Sensor (model SP-C3)</li><li>Factory Calibrated (pH/EC/TDS)</li><li>Includes translucent cap, 2 (AAA) alkaline batteries, pH 4 &amp; 7 calibration solutions, CP-1000 solution, pH storage solution and lanyard</li></ul>Specifications:<ul class="md-block-unordered-list-item"><li>pH Range: 0 – 14 pH</li><li>EC Range: 0 – 9990 µS; 0 – 9.99 mS</li><li>TDS Range: 0 – 8560 ppm (0.7 Scale); 0 – 5000 ppm (0.5 Scale)</li><li>Temperature Range: 0-55 °C; 32-130°F</li><li>Resolution: 0-99: 0.1 µS/ppm/ 0.01mS ; 100-999: 1 µS/ppm; 1000-9990: 10 µS/ppm. Temp. resolution is 0.1 °C/F</li><li>Accuracy: +/- 2%</li><li>EC to TDS Conversion Factor: Non-linear conversions for KCl, 442TM or NaCl solutions, selected by the user.</li><li>Probe: Detachable platinum electrodes &amp; pH glass sensor with reference tube electrodes</li><li>Housing: IP-67 Waterproof (submersible; floats)</li><li>Power source: 2 x Triple A (AAA) included</li><li>Dimensions: 18.5 x 3.4 x 3.4 cm (7.3 x 1.3 x 1.3 inches)</li><li>Weight: 101.5g (3.6 oz)</li><li>442 is a registered trademark of the Myron L Company.</li></ul>Includes:<ul class="md-block-unordered-list-item"><li>1 compact portable case</li><li>1 translucent cap</li><li>2 (AAA) alkaine batteries</li><li>1 packet of pH Storage Solution (PH-PSTOR)</li><li>1 packet of pH 7 Buffer Solution (PH-P7)</li><li>1 packet of pH 4 Buffer Solution (PH-P4)</li><li>1 lanyard</li></ul>

&nbsp;
<h1>HM Digital COM-300PK </h1>
Waterproof Professional Series pH/EC/TDS/Temp Meter Pro Kit
&nbsp;The COM-300 digital water quality meter is a professional grade level pH/EC/TDS/Temp meter ideal for all water quality testing, hydroponics, water purification applications, wastewater regulation, aquaculture, colloidal silver, labs &amp; scientific testing, pools &amp; spas, ecology testing, boilers &amp; cooling towers, water treatment and more. Now, come in compact portable case.
The Pro Kit includes calibration solutions as well to make ensure your testing is always on the point.
Application: Aquaculture, Aquarium, Drinking Water, Food &amp; Beverage, Hydroponics, Industrial, Pool/Spa, Water Treatment
Features:
<ul>
<li>Measures Potential Hydrogen (pH), Electrical Conductivity (EC), Total Dissolved Solids (TDS), Salinity and Temperature</li>
<li>Five scales: pH, µS, mS, ppm 0.5 (NaCl) Scale &amp; 0.7 (442™) Scale</li>
<li>Automatic Temperature Compensation (ATC) using three temperature coefficients</li>
<li>Waterproof housing (IP-67 rating)</li>
<li>Digital Calibration (push button) to any point within the meter’s range</li>
<li>Auto-off function, data-hold function and low-battery indicator</li>
<li>Display: large and easy-to-read LCD screen includes simultaneous temperature reading</li>
<li>Replaceable Sensor (model SP-C3)</li>
<li>Factory Calibrated (pH/EC/TDS)</li>
<li>Includes translucent cap, 2 (AAA) alkaline batteries, pH 4 &amp; 7 calibration solutions, CP-1000 solution, pH storage solution and lanyard</li>
</ul>
Specifications:
<ul>
<li>pH Range: 0 – 14 pH</li>
<li>EC Range: 0 – 9990 µS; 0 – 9.99 mS</li>
<li>TDS Range: 0 – 8560 ppm (0.7 Scale); 0 – 5000 ppm (0.5 Scale)</li>
<li>Temperature Range: 0-55 °C; 32-130°F</li>
<li>Resolution: 0-99: 0.1 µS/ppm/ 0.01mS ; 100-999: 1 µS/ppm; 1000-9990: 10 µS/ppm. Temp. resolution is 0.1 °C/F</li>
<li>Accuracy: +/- 2%</li>
<li>EC to TDS Conversion Factor: Non-linear conversions for KCl, 442TM or NaCl solutions, selected by the user.</li>
<li>Probe: Detachable platinum electrodes &amp; pH glass sensor with reference tube electrodes</li>
<li>Housing: IP-67 Waterproof (submersible; floats)</li>
<li>Power source: 2 x Triple A (AAA) included</li>
<li>Dimensions: 18.5 x 3.4 x 3.4 cm (7.3 x 1.3 x 1.3 inches)</li>
<li>Weight: 101.5g (3.6 oz)</li>
<li>442 is a registered trademark of the Myron L Company.</li>
</ul>
Includes:
<ul>
<li>1 compact portable case</li>
<li>1 translucent cap</li>
<li>2 (AAA) alkaine batteries</li>
<li>1 packet of pH Storage Solution (PH-PSTOR)</li>
<li>1 packet of pH 7 Buffer Solution (PH-P7)</li>
<li>1 packet of pH 4 Buffer Solution (PH-P4)</li>
<li>1 lanyard</li>
</ul>