MULTICOMP PRO

RS Pro

SCHNEIDER ELECTRIC

Electricals

electricals

Auxiliary Contact

auxiliary-contact

Control Relays

control-relays

Electromechanical Interface Relays

electromechanical-interface-relays

Power Relay

power-relay

Programmable Logic Controllers

programmable-logic-controllers

Solid State Relays

solid-state-relays

Electrical Switches

electrical-switches

Switch Actuators

switch-actuators

How to use this 8 way relay with a Raspberry Pi? 

1. Remove the Yellow Jumper between VCC and JD-VCC pins.

2. Connect an external 5V Power source to JD-VCC & GND: 

    External 5V power supply --> JD-VCC pin External Ground --> GND pin 

    *IMPORTANT* Do not use the 5V power supply from the PI as switching relays can cause the PI 
     to crash and reboot due to sudden spikes in voltage while switching.

3. Connect the PI's GND & 3V3 pins to the Relay's GND & VCC pins respectively: 

    PI's 3v3 GPIO --> VCC pin PI's GND GPIO --> GND pin

 4. Connect PI's GPIO to Relay's IN1 ~ IN8 as needed: 

     [EXAMPLE] PI's GPIO 12 --> IN1 PI's GPIO 16 --> IN2 

     Note: You may use any combination of GPIO to Relay IN{X}. This configuration was chosen 
     because it's easy to draw.

 Possible PI to Relay Wiring Configuration 

**Disclaimer: Picture shown is for illustration purposes only, actual product may differ.

<h3 class="md-block-header-three">8 Channel 5V Relay Module 2PH77506A</h3>How to use this 8 way relay with a Raspberry Pi? ** Guide sheet attached.1. Remove the Yellow Jumper between VCC and JD-VCC pins.<figure class="md-block-image"><img src="https://storage.googleapis.com/eezee-product-images/JPAGvGGmdtnYwHkgSENpmC.png" alt="" /><figcaption class="md-block-image-caption"></figcaption></figure>2. Connect an external 5V Power source to JD-VCC &amp; GND: External 5V power supply --&gt; JD-VCC pin External Ground --&gt; GND pin *IMPORTANT* Do not use the 5V power supply from the PI as switching relays can cause the PI to crash and reboot due to sudden spikes in voltage while switching.<figure class="md-block-image"><img src="https://storage.googleapis.com/eezee-product-images/rxdOcQY~TF99AI76RGh_6Q.png" alt="" /><figcaption class="md-block-image-caption"></figcaption></figure>3. Connect the PI&#x27;s GND &amp; 3V3 pins to the Relay&#x27;s GND &amp; VCC pins respectively: PI&#x27;s 3v3 GPIO --&gt; VCC pin PI&#x27;s GND GPIO --&gt; GND pin<figure class="md-block-image"><img src="https://storage.googleapis.com/eezee-product-images/_A1myNDrhf_GxvoJqGcYVt.png" alt="" /><figcaption class="md-block-image-caption"></figcaption></figure> 4. Connect PI&#x27;s GPIO to Relay&#x27;s IN1 ~ IN8 as needed: [EXAMPLE] PI&#x27;s GPIO 12 --&gt; IN1 PI&#x27;s GPIO 16 --&gt; IN2 Note: You may use any combination of GPIO to Relay IN{X}. This configuration was chosen because it&#x27;s easy to draw.<figure class="md-block-image"><img src="https://storage.googleapis.com/eezee-product-images/dmq7mQYY4Q9OmOmoRsD~ZD.png" alt="" /><figcaption class="md-block-image-caption"></figcaption></figure> Possible PI to Relay Wiring Configuration <figure class="md-block-image"><img src="https://storage.googleapis.com/eezee-product-images/p4F88BmQ7Wu6WyKSsr2WI7.png" alt="" /><figcaption class="md-block-image-caption"></figcaption></figure>What it looks like after wiring it up**Disclaimer: Picture shown is for illustration purposes only, actual product may differ.

<h3>8 Channel 5V Relay Module 2PH77506A</h3>
How to use this 8 way relay with a Raspberry Pi?&nbsp;
** Guide sheet attached.
1. Remove the Yellow Jumper between VCC and JD-VCC pins.

 <div class="img-ctnr">
 <amp-img 
 on="tap:bfvkc"
 tabindex="0"
 role="button"
 class="contain"
 layout="fill"
 src="https://storage.googleapis.com/eezee-product-images/JPAGvGGmdtnYwHkgSENpmC.png"
 ></amp-img>
 </div>
 
 <amp-image-lightbox 
 id="bfvkc" 
 layout="nodisplay"></amp-image-lightbox>

 
2. Connect an external 5V Power source to JD-VCC &amp; GND:&nbsp;
&nbsp;&nbsp;&nbsp;&nbsp;External 5V power supply --&gt; JD-VCC pin External Ground --&gt; GND pin&nbsp;
&nbsp;&nbsp;&nbsp;&nbsp;*IMPORTANT* Do not use the 5V power supply from the PI as switching relays can cause the PI 
 to crash and reboot due to sudden spikes in voltage while switching.

 <div class="img-ctnr">
 <amp-img 
 on="tap:altje"
 tabindex="0"
 role="button"
 class="contain"
 layout="fill"
 src="https://storage.googleapis.com/eezee-product-images/rxdOcQY~TF99AI76RGh_6Q.png"
 ></amp-img>
 </div>
 
 <amp-image-lightbox 
 id="altje" 
 layout="nodisplay"></amp-image-lightbox>

 
3. Connect the PI's GND &amp; 3V3 pins to the Relay's GND &amp; VCC pins respectively:&nbsp;
&nbsp;&nbsp;&nbsp;&nbsp;PI's 3v3 GPIO --&gt; VCC pin PI's GND GPIO --&gt; GND pin

 <div class="img-ctnr">
 <amp-img 
 on="tap:5ltvj"
 tabindex="0"
 role="button"
 class="contain"
 layout="fill"
 src="https://storage.googleapis.com/eezee-product-images/_A1myNDrhf_GxvoJqGcYVt.png"
 ></amp-img>
 </div>
 
 <amp-image-lightbox 
 id="5ltvj" 
 layout="nodisplay"></amp-image-lightbox>

 
&nbsp;4. Connect PI's GPIO to Relay's IN1 ~ IN8 as needed:&nbsp;
&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;[EXAMPLE] PI's GPIO 12 --&gt; IN1 PI's GPIO 16 --&gt; IN2&nbsp;
&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;Note: You may use any combination of GPIO to Relay IN{X}. This configuration was chosen 
 because it's easy to draw.

 <div class="img-ctnr">
 <amp-img 
 on="tap:11icp"
 tabindex="0"
 role="button"
 class="contain"
 layout="fill"
 src="https://storage.googleapis.com/eezee-product-images/dmq7mQYY4Q9OmOmoRsD~ZD.png"
 ></amp-img>
 </div>
 
 <amp-image-lightbox 
 id="11icp" 
 layout="nodisplay"></amp-image-lightbox>

 
&nbsp;Possible PI to Relay Wiring Configuration&nbsp;

 <div class="img-ctnr">
 <amp-img 
 on="tap:3ev26"
 tabindex="0"
 role="button"
 class="contain"
 layout="fill"
 src="https://storage.googleapis.com/eezee-product-images/p4F88BmQ7Wu6WyKSsr2WI7.png"
 ></amp-img>
 </div>
 
 <amp-image-lightbox 
 id="3ev26" 
 layout="nodisplay"></amp-image-lightbox>

 
What it looks like after wiring it up
**Disclaimer: Picture shown is for illustration purposes only, actual product may differ.

Eezee LnF

WHOLESAFETY

KING'S

LOCTITE

OREX

NORTON

STABILO

ZEBRA TECHNOLOGIES

QUEBEE SAFETY

Safety Shoes

U Bolts

Warning Signs

Packaging & Shipping Supplies

Writing Materials

Clothing

Safety Gloves

Painting Tools

Protective Suits

Ink Cartridge, Drums & Toners

buyerIntroduction

8 Channel Dc 5V Relay Module for Arduino Raspberry Pi Dsp Avr Pic Arm

channel dc 5v relay module arduino raspberry pi dsp avr pic arm modul relai saluran untuk power daya oem geganti oem/oem代工 适用于 通道直流 继电器模块 功率继电器 oem代工 obtfju

8-channel-dc-5v-relay-module-for-arduino-raspberry-pi-dsp-avr-pic-arm

Technical Data Sheet (339.45KB) EN

MULTICOMP

Surface Mount Resistors

Multilayer Ceramic Capacitors

Through Hole Resistors

Hook Up Wires

Junction & Enclosure Box

Circular Connectors

Fixed Resistors

PCB Headers

Crystal Units

Heat-Shrinkable Tube

Element14

Multicomp Pro 83-17990 5V Trigger Relay Module for Arduino and Raspberry Pi

multicomp pro 83-17990 5v trigger relay module arduino raspberry pi modul relai pemicu untuk dan power daya geganti pencetus 适用于 触发继电器模块 功率继电器 多计算机专业版

multicomp-pro-83-17990-5v-trigger-relay-module-for-arduino-and-raspberry-pi

Datasheet

Installation Instruction Manual

Siemens

STANLEY

DEUTSCH

Facom

RAPID

ECLIPSE TOOLS

Screw

O Ring

Plugs & Connector 

Bolts

Panel Mount Indicators 

Button Switch

Electrical Wire 

Aluminium Capacitors

RS Components ETH SG

Rs Pro 8886871 Din Rail Mount Interface Relay, 24V Dc Coil, Spdt

rs pro 8886871 din rail mount interface relay, 24v dc coil, spdt coil dc, electromechanical relays geganti antaramuka pemasangan rel din, gegelung 24v, 导轨安装接口继电器，24v 直流线圈，spdt rs专业版

rs-pro-8886871-din-rail-mount-interface-relay-24v-dc-coil-spdt

RS Pro Datasheet

Rs Pro 8886874 Din Rail Mount Interface Relay, 24V Dc Coil, Spdt

rs pro 8886874 din rail mount interface relay, 24v dc coil, spdt coil dc, electromechanical relays geganti antaramuka pemasangan rel din, gegelung 24v, 导轨安装接口继电器，24v 直流线圈，spdt rs专业版

rs-pro-8886874-din-rail-mount-interface-relay-24v-dc-coil-spdt

Rs Pro 8886877 Din Rail Mount Interface Relay, 24V Dc Coil, Spdt

rs pro 8886877 din rail mount interface relay, 24v dc coil, spdt coil dc, electromechanical relays geganti antaramuka pemasangan rel din, gegelung 24v, 导轨安装接口继电器，24v 直流线圈，spdt rs专业版

rs-pro-8886877-din-rail-mount-interface-relay-24v-dc-coil-spdt

Rs Pro 8886912 Din Rail Mount Interface Relay, 230V ac/dc Coil, Spdt

rs pro 8886912 din rail mount interface relay, 230v ac/dc coil, spdt coil ac/dc, electromechanical relays geganti antaramuka pemasangan rel din, gegelung 230v, 导轨安装接口继电器，230v 交流/直流线圈，spdt rs专业版

rs-pro-8886912-din-rail-mount-interface-relay-230v-ac-dc-coil-spdt

Rs Pro 8886903 Din Rail Mount Interface Relay, 115V ac/dc Coil, Spdt

rs pro 8886903 din rail mount interface relay, 115v ac/dc coil, spdt coil ac/dc, electromechanical relays geganti antaramuka pemasangan rel din, gegelung 115v, 导轨安装接口继电器，115v 交流/直流线圈，spdt rs专业版

rs-pro-8886903-din-rail-mount-interface-relay-115v-ac-dc-coil-spdt

Rs Pro 8886896 Din Rail Mount Interface Relay, 24V ac/dc Coil, Spdt

rs pro 8886896 din rail mount interface relay, 24v ac/dc coil, spdt coil ac/dc, electromechanical relays geganti antaramuka pemasangan rel din, gegelung 24v, 导轨安装接口继电器，24v 交流/直流线圈，spdt rs专业版

rs-pro-8886896-din-rail-mount-interface-relay-24v-ac-dc-coil-spdt

Rs Pro 8886899 Din Rail Mount Interface Relay, 115V ac/dc Coil, Spdt

rs pro 8886899 din rail mount interface relay, 115v ac/dc coil, spdt coil ac/dc, electromechanical relays geganti antaramuka pemasangan rel din, gegelung 115v, 导轨安装接口继电器，115v 交流/直流线圈，spdt rs专业版

rs-pro-8886899-din-rail-mount-interface-relay-115v-ac-dc-coil-spdt

Rs Pro 8886883 Din Rail Mount Interface Relay, 24V ac/dc Coil, Spdt

rs pro 8886883 din rail mount interface relay, 24v ac/dc coil, spdt coil ac/dc, electromechanical relays geganti antaramuka pemasangan rel din, gegelung 24v, 导轨安装接口继电器，24v 交流/直流线圈，spdt rs专业版

rs-pro-8886883-din-rail-mount-interface-relay-24v-ac-dc-coil-spdt

Rs Pro 8886880 Din Rail Mount Interface Relay, 24V ac/dc Coil, Spdt

rs pro 8886880 din rail mount interface relay, 24v ac/dc coil, spdt coil ac/dc, electromechanical relays geganti antaramuka pemasangan rel din, gegelung 24v, 导轨安装接口继电器，24v 交流/直流线圈，spdt rs专业版

rs-pro-8886880-din-rail-mount-interface-relay-24v-ac-dc-coil-spdt

Rs Pro 8886900 Din Rail Mount Interface Relay, 230V ac/dc Coil, Spdt

rs pro 8886900 din rail mount interface relay, 230v ac/dc coil, spdt coil ac/dc, electromechanical relays geganti antaramuka pemasangan rel din, gegelung 230v, 导轨安装接口继电器，230v 交流/直流线圈，spdt rs专业版

rs-pro-8886900-din-rail-mount-interface-relay-230v-ac-dc-coil-spdt

Rs Pro 8886922 Solid State Relay, 2 a Load, Din Rail Mount, 264 V Load, 30 V Control

rs pro 8886922 solid state relay, load, din rail mount, 264 30 control beban 2, dudukan rel din, v, kontrol relays geganti keadaan pepejal, beban, lekap kawalan 固态继电器，2a 负载，din 导轨安装，264 负载，30 控制 rs专业版

rs-pro-8886922-solid-state-relay-2-a-load-din-rail-mount-264-v-load-30-v-control

DC 12V 4CH Smart 433 MHz RF Wireless Relay Receiver Module with 2 Transmitters, for Truck, Motor, Garage, Electric Lock, 3 Operating Modes

【Super      Design】      433MHz RF wireless remote control. Stable and reliable performance with      high reception sensitivity (> 104dBm) Radio frequency signal      transmission. You can remotely control each machine connected to the relay      receiver via the transmitter. Strong signals can pass through walls,      floors, doors, etc. It can be controlled within 50 meters in an open area.      The chip code is learning code 1527 which makes the system more secure.

【Easy      to Use】Extremely      easy to set up and reset. There are 3 operating modes (momentary/toggle      mode) that can be configured. You can easily configure yourself according      to your request. Product operating mode is adjustable. This item has      already been configured in toggle mode. It can also be configured in mix      mode. Such as 2 channels in momentary mode and 2 channels in toggle mode.

【More      Flexibility】This      receiver contains 4 relays and there are 3 terminals (normally open,      common, normally closed) for each relay. These 4 relays are independent,      so you can control each of them independently. Each receiver can store      about 5 transmitters. And one transmitter can control multiple receivers.      For example, you can use two relays to control the station door and the      other two to control the lights.

【Quality      assurance】      High quality relay can be used more than 100,000 times. Let this product      more durable and stable to use. The high power blue terminal can withstand      a current of 10A, so that this product can have a good effect even when      the current is unstable.

【Wide      Application】Products      can be used in homes, farms, factories, offices, laboratories,      supermarkets, etc. You can remotely use each device connected to the      receiver relay via the remote control. Such as: truck trunk, garage door,      electric door, shutter door, extension door and electric curtain, fan,      lamp, lighting, ventilation device, signal transmission and so on.

Operation Mode: Momentary Mode, Toggle Mode

Support Encoding Chip: Learning Code 1527

1. Delivery can be expedited with additional freight cost

2. Stock availability/ Actual order lead time will be rechecked once confirm order

3. We do not accept returns or exchanges due to Indent item unless product quality issue

4. Picture shown is for illustration only, actual product may differ

5. This image is representative of the product range, actual product may differ

6. Product may vary slightly from image representation

7. Please allow 1-3mm error due to manual measurement

DC 12V 4CH Smart 433 MHz RF Wireless Relay Receiver Module with 2 Transmitters, for Truck, Motor, Garage, Electric Lock, 3 Operating Modes<ul class="md-block-unordered-list-item"><li>【Super Design】 433MHz RF wireless remote control. Stable and reliable performance with high reception sensitivity (&gt; 104dBm) Radio frequency signal transmission. You can remotely control each machine connected to the relay receiver via the transmitter. Strong signals can pass through walls, floors, doors, etc. It can be controlled within 50 meters in an open area. The chip code is learning code 1527 which makes the system more secure.</li><li>【Easy to Use】Extremely easy to set up and reset. There are 3 operating modes (momentary/toggle mode) that can be configured. You can easily configure yourself according to your request. Product operating mode is adjustable. This item has already been configured in toggle mode. It can also be configured in mix mode. Such as 2 channels in momentary mode and 2 channels in toggle mode.</li><li>【More Flexibility】This receiver contains 4 relays and there are 3 terminals (normally open, common, normally closed) for each relay. These 4 relays are independent, so you can control each of them independently. Each receiver can store about 5 transmitters. And one transmitter can control multiple receivers. For example, you can use two relays to control the station door and the other two to control the lights.</li><li>【Quality assurance】 High quality relay can be used more than 100,000 times. Let this product more durable and stable to use. The high power blue terminal can withstand a current of 10A, so that this product can have a good effect even when the current is unstable.</li><li>【Wide Application】Products can be used in homes, farms, factories, offices, laboratories, supermarkets, etc. You can remotely use each device connected to the receiver relay via the remote control. Such as: truck trunk, garage door, electric door, shutter door, extension door and electric curtain, fan, lamp, lighting, ventilation device, signal transmission and so on.</li></ul>Input Power: DC12VRF Frequency: 315MHZ/433.92MHZStandby Current: 5mAMatch Way: Learning ButtonReceiver Sensitivity: -104dbmOperation Mode: Momentary Mode, Toggle ModeOutput: NO, NC, COM, +V, GNDSupport Encoding Chip: Learning Code 1527Working temperature: -10~+80°CSize: 68.2x48.2(mm)Note: 1. Delivery can be expedited with additional freight cost2. Stock availability/ Actual order lead time will be rechecked once confirm order3. We do not accept returns or exchanges due to Indent item unless product quality issue4. Picture shown is for illustration only, actual product may differ5. This image is representative of the product range, actual product may differ6. Product may vary slightly from image representation7. Please allow 1-3mm error due to manual measurement

DC 12V 4CH Smart 433 MHz RF Wireless Relay Receiver Module with 2 Transmitters, for Truck, Motor, Garage, Electric Lock, 3 Operating Modes
<ul>
<li>【Super Design】 433MHz RF wireless remote control. Stable and reliable performance with high reception sensitivity (&gt; 104dBm) Radio frequency signal transmission. You can remotely control each machine connected to the relay receiver via the transmitter. Strong signals can pass through walls, floors, doors, etc. It can be controlled within 50 meters in an open area. The chip code is learning code 1527 which makes the system more secure.</li>
<li>【Easy to Use】Extremely easy to set up and reset. There are 3 operating modes (momentary/toggle mode) that can be configured. You can easily configure yourself according to your request. Product operating mode is adjustable. This item has already been configured in toggle mode. It can also be configured in mix mode. Such as 2 channels in momentary mode and 2 channels in toggle mode.</li>
<li>【More Flexibility】This receiver contains 4 relays and there are 3 terminals (normally open, common, normally closed) for each relay. These 4 relays are independent, so you can control each of them independently. Each receiver can store about 5 transmitters. And one transmitter can control multiple receivers. For example, you can use two relays to control the station door and the other two to control the lights.</li>
<li>【Quality assurance】 High quality relay can be used more than 100,000 times. Let this product more durable and stable to use. The high power blue terminal can withstand a current of 10A, so that this product can have a good effect even when the current is unstable.</li>
<li>【Wide Application】Products can be used in homes, farms, factories, offices, laboratories, supermarkets, etc. You can remotely use each device connected to the receiver relay via the remote control. Such as: truck trunk, garage door, electric door, shutter door, extension door and electric curtain, fan, lamp, lighting, ventilation device, signal transmission and so on.</li>
</ul>
Input Power: DC12V
RF Frequency: 315MHZ/433.92MHZ
Standby Current: 5mA
Match Way: Learning Button
Receiver Sensitivity: -104dbm
Operation Mode: Momentary Mode, Toggle Mode
Output: NO, NC, COM, +V, GND
Support Encoding Chip: Learning Code 1527
Working temperature: -10~+80°C
Size: 68.2x48.2(mm)
Note: 
1. Delivery can be expedited with additional freight cost
2. Stock availability/ Actual order lead time will be rechecked once confirm order
3. We do not accept returns or exchanges due to Indent item unless product quality issue
4. Picture shown is for illustration only, actual product may differ
5. This image is representative of the product range, actual product may differ
6. Product may vary slightly from image representation
7. Please allow 1-3mm error due to manual measurement

Instruction

Prolockey

NANHUA

Eezee Pro

Iflytek

Nitto

Remax

SAIRUI

Guo Mao

Padlocks & Lockout Devices

Padlocks & Lockout Station

Toolbags

Lockout Tags

Safe Box & Safe Chest

Safety Cone

Cable Protectors

Pedal Bins

Desk stationery

 Samuel Wang

Dc 12V 4CH Smart 433 Mhz Rf Wireless Relay Receiver Module With 2 Transmitters, for Truck, Motor, Garage, Electric Lock, 3 Operating Modes

dc 12v 4ch smart 433mhz rf wireless relay receiver module transmitters, truck, motor, garage, electric lock, operating modes modul penerima relai nirkabel cerdas dengan pemancar, untuk truk, garasi, kunci elektrik, mode pengoperasian control relays oem geganti wayarles pintar lori, garaj, mod operasi 智能 无线中继接收器模块，带 个发射器，适用于卡车、发动机、车库、电动锁，3 种操作模式 oem代工

dc-12v-4ch-smart-433-mhz-rf-wireless-relay-receiver-module-with-2-transmitters-for-truck-motor-garage-electric-lock-3-operating-modes

RS PRO Datasheet

Rs Pro 9176370 8 Inputs, 4 Outputs, Digital, Relay, Modbus Networking, Computer Interface - , Logic Module

rs pro 9176370 inputs, outputs, digital, relay, modbus networking, computer interface logic module input, output, relai, jaringan modbus, antarmuka komputer -, modul logika programmable controllers rangkaian antara muka logik 个输入，4 个输出，数字，继电器，modbus 网络，计算机接口 ，逻辑模块 rs专业版

rs-pro-9176370-8-inputs-4-outputs-digital-relay-modbus-networking-computer-interface-logic-module

LA4DFB

Jimmy Foo

Philips

Thomas & Betts

BRADY

Bussmann

Weidmuller

FUJI

Crouse-Hinds

Circuit Breaker

Fuses & Fusegear

Light Bulbs

Led Lights

Contactors

Other Electrical Accessories

Light Tubes

Doreen Tan

Schneider Electric LA4DFB Tesys Deca, Interface Amplifier Module, Relay, 24V Dc / 250V Ac

schneider electric la4dfb tesys deca, interface amplifier module, relay, 24v dc 250v ac modul antarmuka, relai, auxiliary contact kontak bantu penguat antara muka, geganti, deca，接口放大器模块，继电器，24v 辅助触点 施耐德电气

schneider-electric-la4dfb-tesys-deca-interface-amplifier-module-relay-24v-dc-250v-ac

Schneider Electric Cct Roller Shutter Relay Switch Actuator, Flush Mount, 240 V Ac

The Schneider Electric wiser micro module Shades Control is used to control one blind or roller shutter motor. It can be wireless controlled by a Smartphone, by another Wiser device or by the wiser home touch via the wiser app the user can set up timers, schedulers and other settings like up or down or stop control by the app, side controller switch.

Installed inside a wall box or an installation box close to the shutter engine
Used to open or close window blinds or shutters
Local switching control with push-button wired to the micro module
Remote control with Wiser by SE App

<h3 class="md-block-header-three">Schneider Electric Cct Roller Shutter Relay Switch Actuator, Flush Mount, 240 V Ac</h3>The Schneider Electric wiser micro module Shades Control is used to control one blind or roller shutter motor. It can be wireless controlled by a Smartphone, by another Wiser device or by the wiser home touch via the wiser app the user can set up timers, schedulers and other settings like up or down or stop control by the app, side controller switch.Installed inside a wall box or an installation box close to the shutter engine Used to open or close window blinds or shutters Local switching control with push-button wired to the micro module Remote control with Wiser by SE App

<h3>Schneider Electric Cct Roller Shutter Relay Switch Actuator, Flush Mount, 240 V Ac</h3>
The Schneider Electric wiser micro module Shades Control is used to control one blind or roller shutter motor. It can be wireless controlled by a Smartphone, by another Wiser device or by the wiser home touch via the wiser app the user can set up timers, schedulers and other settings like up or down or stop control by the app, side controller switch.
Installed inside a wall box or an installation box close to the shutter engine 
Used to open or close window blinds or shutters 
Local switching control with push-button wired to the micro module 
Remote control with Wiser by SE App

Schneider Electric CCT5015-0002W Cct Roller Shutter Relay Switch Actuator, Flush Mount, 240 V Ac

schneider electric cct5015-0002w cct roller shutter relay switch actuator, flush mount, 240 ac aktuator, actuators electric/施耐德电气 卷帘门继电器开关执行器，嵌入式安装，240 交流电 施耐德电气

schneider-electric-cct5015-0002w-cct-roller-shutter-relay-switch-actuator-flush-mount-240-v-ac