Druck

FLUKE

Piecal

RS Pro

Test & Measurement

test-measurement

Calibrators

calibrators

Multimeters

multimeters

Pressure Measurement

pressure-measurement

FLUKE 754 Multi Function Calibrator, 110mA Dc, 300V ac/dc, 136 X 245 X 63mm

 If you're lugging around the weight of too many testing instruments, turn to this multifunction calibrator from FLUKE. In one user-friendly device, you get just what you need to carry out most of your daily electrical troubleshooting tasks. The versatile tool measures, sources and simulates pressure, temperature and various electrical signals, making it a handy all-rounder. A dual display lets you read both sourced and measured parameters at the same time, which helps to speed up maintenance. You can rest assured this calibrator speaks your lingo, thanks to its choice of five different languages.


• Includes a soft field case for easy storage and transportation
• Conveniently supplied with three sets of test probes
• Large storage capacity holds a week's worth of downloads and results
• Bright white screen is visible in most light conditions
• USB port supports efficient data transfer


• Robotic systems
• Chemical processing
• Industrial electronics
• Power utilities


Is this multifunction calibrator's battery rechargeable?

Yes, the battery offers 10hrs of uninterrupted use and you can charge it when it runs down. For convenience, the instrument is supplied with a battery pack and charger, so there's no need to buy extra parts. 

<h3 class="md-block-header-three">FLUKE 754 Multi Function Calibrator, 110mA Dc, 300V ac/dc, 136 X 245 X 63mm</h3> If you&#x27;re lugging around the weight of too many testing instruments, turn to this multifunction calibrator from FLUKE. In one user-friendly device, you get just what you need to carry out most of your daily electrical troubleshooting tasks. The versatile tool measures, sources and simulates pressure, temperature and various electrical signals, making it a handy all-rounder. A dual display lets you read both sourced and measured parameters at the same time, which helps to speed up maintenance. You can rest assured this calibrator speaks your lingo, thanks to its choice of five different languages. <h3 class="md-block-header-three">Features &amp; Benefits</h3>• Includes a soft field case for easy storage and transportation • Conveniently supplied with three sets of test probes • Large storage capacity holds a week&#x27;s worth of downloads and results • Bright white screen is visible in most light conditions • USB port supports efficient data transfer <h3 class="md-block-header-three">Applications</h3>• Robotic systems • Chemical processing • Industrial electronics • Power utilities <h3 class="md-block-header-three">Is this multifunction calibrator&#x27;s battery rechargeable?</h3>Yes, the battery offers 10hrs of uninterrupted use and you can charge it when it runs down. For convenience, the instrument is supplied with a battery pack and charger, so there&#x27;s no need to buy extra parts.

<h3>FLUKE 754 Multi Function Calibrator, 110mA Dc, 300V ac/dc, 136 X 245 X 63mm</h3>
&nbsp;If you're lugging around the weight of too many testing instruments, turn to this multifunction calibrator from FLUKE. In one user-friendly device, you get just what you need to carry out most of your daily electrical troubleshooting tasks. The versatile tool measures, sources and simulates pressure, temperature and various electrical signals, making it a handy all-rounder. A dual display lets you read both sourced and measured parameters at the same time, which helps to speed up maintenance. You can rest assured this calibrator speaks your lingo, thanks to its choice of five different languages. 

<h3>Features &amp; Benefits</h3>
• Includes a soft field case for easy storage and transportation 
• Conveniently supplied with three sets of test probes 
• Large storage capacity holds a week's worth of downloads and results 
• Bright white screen is visible in most light conditions 
• USB port supports efficient data transfer 

<h3>Applications</h3>
• Robotic systems 
• Chemical processing 
• Industrial electronics 
• Power utilities 

<h3>Is this multifunction calibrator's battery rechargeable?</h3>
Yes, the battery offers 10hrs of uninterrupted use and you can charge it when it runs down. For convenience, the instrument is supplied with a battery pack and charger, so there's no need to buy extra parts.&nbsp;

SCHNEIDER ELECTRIC

Fluke Networks

Abus

Screw

O Ring

Surface Mount Resistors

Circular Connectors

Contactors

Bolts

Panel Mount Indicators 

Molded Case Circuit Breakers - MCCBs

Junction & Enclosure Box

Electrical Wire 

RS Components ETH SG

buyerIntroduction

fluke 754 multi function calibrator, 110ma dc, 300v ac/dc, 136 245 63mm kalibrator multifungsi 754, calibrators penentukuran berbilang fungsi, fluke/福禄克 多功能校准器，110ma 直流，300v 交流/直流，136 福禄克

fluke-754-multi-function-calibrator-110ma-dc-300v-ac-dc-136-x-245-x-63mm

FLUKE 753 Multi Function Calibrator, 110mA Dc, 300V ac/dc, 136 X 245 X 63mm


 Take the paperwork out of your electrical testing tasks using this FLUKE multifunction calibrator. It lets you easily download lists and instructions or upload data for analysis and printing when it suits you, while simultaneously processing parameters. You can use this multitasker to take critical measurements such as temperature, pressure and electrical signals, so you don't need to carry lots of different meters. It's ready for in-field use and comes with a handy soft case to keep it safely stored when you're on the go. Thanks to its long-lasting Li-ion battery, there's little chance of this calibrator dying on you during your shift.


• Easy-to-use menu-driven display that guides you through tasks
• Multilingual interface offers a choice of five languages
• Autostep function lets you conveniently run it unattended
• Bright light for easy reading in most light conditions


• Industrial automation
• Aerospace technology
• Oil and gas industries
• Power utilities


Does this multifunction calibrator include a USB port?

Yes, the device has a USB interface for convenient unidirectional communication with computer-based instrument management applications. This saves you time, as you can quickly transfer results to your PC without having to manually jot them down.
 

<h3 class="md-block-header-three">FLUKE 753 Multi Function Calibrator, 110mA Dc, 300V ac/dc, 136 X 245 X 63mm</h3> Take the paperwork out of your electrical testing tasks using this FLUKE multifunction calibrator. It lets you easily download lists and instructions or upload data for analysis and printing when it suits you, while simultaneously processing parameters. You can use this multitasker to take critical measurements such as temperature, pressure and electrical signals, so you don&#x27;t need to carry lots of different meters. It&#x27;s ready for in-field use and comes with a handy soft case to keep it safely stored when you&#x27;re on the go. Thanks to its long-lasting Li-ion battery, there&#x27;s little chance of this calibrator dying on you during your shift. <h3 class="md-block-header-three">Features &amp; Benefits</h3>• Easy-to-use menu-driven display that guides you through tasks • Multilingual interface offers a choice of five languages • Autostep function lets you conveniently run it unattended • Bright light for easy reading in most light conditions <h3 class="md-block-header-three">Applications</h3>• Industrial automation • Aerospace technology • Oil and gas industries • Power utilities <h3 class="md-block-header-three">Does this multifunction calibrator include a USB port?</h3>Yes, the device has a USB interface for convenient unidirectional communication with computer-based instrument management applications. This saves you time, as you can quickly transfer results to your PC without having to manually jot them down.

<h3>FLUKE 753 Multi Function Calibrator, 110mA Dc, 300V ac/dc, 136 X 245 X 63mm</h3>
 
 Take the paperwork out of your electrical testing tasks using this FLUKE multifunction calibrator. It lets you easily download lists and instructions or upload data for analysis and printing when it suits you, while simultaneously processing parameters. You can use this multitasker to take critical measurements such as temperature, pressure and electrical signals, so you don't need to carry lots of different meters. It's ready for in-field use and comes with a handy soft case to keep it safely stored when you're on the go. Thanks to its long-lasting Li-ion battery, there's little chance of this calibrator dying on you during your shift. 

<h3>Features &amp; Benefits</h3>
• Easy-to-use menu-driven display that guides you through tasks 
• Multilingual interface offers a choice of five languages 
• Autostep function lets you conveniently run it unattended 
• Bright light for easy reading in most light conditions 

<h3>Applications</h3>
• Industrial automation 
• Aerospace technology 
• Oil and gas industries 
• Power utilities 

<h3>Does this multifunction calibrator include a USB port?</h3>
Yes, the device has a USB interface for convenient unidirectional communication with computer-based instrument management applications. This saves you time, as you can quickly transfer results to your PC without having to manually jot them down. 
&nbsp;

fluke 753 multi function calibrator, 110ma dc, 300v ac/dc, 136 245 63mm kalibrator multifungsi 753, calibrators penentukuran berbilang fungsi, fluke/福禄克 多功能校准器，110ma 直流，300v 交流/直流，136 福禄克

fluke-753-multi-function-calibrator-110ma-dc-300v-ac-dc-136-x-245-x-63mm

Fluke 725 Multi Function Calibrator, 24mA, 30V, 130 X 236 X 61mm

 Need a testing instrument that picks up on lots of different process signals? Reach for this multifunction calibrator from FLUKE. It lets you inspect and adjust equipment such as transmitters, flow meters and sensors, making it a versatile unit to keep in your toolbox. Thanks to its easy-to-operate, menuless controls, it's a cinch to use. A backlit display keeps you clearly in the picture, even when light conditions are dim. To test your transmitter out of circuit and quickly hone in on a problem, simply use the calibrator's loop supply that includes mA measurement.


• Streamlined design fits comfortably into your hand
• Resists shock and vibration to meet the demands of extreme settings
• EMC compatibility, so is unlikely to interfere with nearby electronic devices
• Typical 25hr battery life keeps you on the go in the field


• Automotive manufacturing
• Power utilities
• Oil and gas refineries
• Chemical processing


Do I get test leads with this multifunction calibrator?

Yes, for your convenience the instrument comes with two pairs of test leads as well as alligator clips, so you've got what you need to put it straight to work. 

<h3 class="md-block-header-three">Fluke 725 Multi Function Calibrator, 24mA, 30V, 130 X 236 X 61mm</h3> Need a testing instrument that picks up on lots of different process signals? Reach for this multifunction calibrator from FLUKE. It lets you inspect and adjust equipment such as transmitters, flow meters and sensors, making it a versatile unit to keep in your toolbox. Thanks to its easy-to-operate, menuless controls, it&#x27;s a cinch to use. A backlit display keeps you clearly in the picture, even when light conditions are dim. To test your transmitter out of circuit and quickly hone in on a problem, simply use the calibrator&#x27;s loop supply that includes mA measurement. <h3 class="md-block-header-three">Features &amp; Benefits</h3>• Streamlined design fits comfortably into your hand • Resists shock and vibration to meet the demands of extreme settings • EMC compatibility, so is unlikely to interfere with nearby electronic devices • Typical 25hr battery life keeps you on the go in the field <h3 class="md-block-header-three">Applications</h3>• Automotive manufacturing • Power utilities • Oil and gas refineries • Chemical processing <h3 class="md-block-header-three">Do I get test leads with this multifunction calibrator?</h3>Yes, for your convenience the instrument comes with two pairs of test leads as well as alligator clips, so you&#x27;ve got what you need to put it straight to work.

<h3>Fluke 725 Multi Function Calibrator, 24mA, 30V, 130 X 236 X 61mm</h3>
&nbsp;Need a testing instrument that picks up on lots of different process signals? Reach for this multifunction calibrator from FLUKE. It lets you inspect and adjust equipment such as transmitters, flow meters and sensors, making it a versatile unit to keep in your toolbox. Thanks to its easy-to-operate, menuless controls, it's a cinch to use. A backlit display keeps you clearly in the picture, even when light conditions are dim. To test your transmitter out of circuit and quickly hone in on a problem, simply use the calibrator's loop supply that includes mA measurement. 

<h3>Features &amp; Benefits</h3>
• Streamlined design fits comfortably into your hand 
• Resists shock and vibration to meet the demands of extreme settings 
• EMC compatibility, so is unlikely to interfere with nearby electronic devices 
• Typical 25hr battery life keeps you on the go in the field 

<h3>Applications</h3>
• Automotive manufacturing 
• Power utilities 
• Oil and gas refineries 
• Chemical processing 

<h3>Do I get test leads with this multifunction calibrator?</h3>
Yes, for your convenience the instrument comes with two pairs of test leads as well as alligator clips, so you've got what you need to put it straight to work.&nbsp;

fluke 725 multi function calibrator, 24ma, 30v, 130 236 61mm kalibrator multifungsi 725, calibrators fluke/福禄克 多功能校准器，24ma，30v，130 福禄克

fluke-725-multi-function-calibrator-24ma-30v-130-x-236-x-61mm

Fluke 725 Multifunction Process Calibrator

 With the Fluke 725 Multifunction Process Calibrator you can easily source and measure almost any process parameter and test almost any process device. Measure and source mA, volts, temperature (RTDs and thermocouples), frequency, ohms, and pressure, using optional pressure modules. From the moment you pick it up, the Fluke 725 is ready to perform as a powerful, yet easy-to-use field calibrator. Its simple controls, without menus, make operation easy and the backlit display provides better visibility in poor light. It features a small, streamline shape and a rugged, reliable design that make it ideal for standing up to harsh field conditions.  

Power transmitters during test using the loop supply with simultaneous mA measurement so you can test a transmitter out of circuit and better isolate problems. The 725 can also test a variety of fast pulsed RTD transmitters and PLCs (Programmable logic controllers), with pulses as short as 10 ms.

Source mA with simultaneous pressure measurement to conduct valve and I/P (Input current/Output pressure) tests in a single device. You can also test flow meters with frequency and CPM (counts per minute) functions and perform fast linearity tests with auto-step and auto-ramp features so you can quickly verify the mA signal at different output levels.

For more precision, pulse sourcing, pulse counting (totalizing) consider the Fluke 726 Precision Multifunction Calibrator.

For documenting and HART communication built into your calibrator, consider the Fluke 754 Documenting Process Calibrator with HART. 

Calibration of both temperature and pressure transmitters

Measure/source/simulate mA loop parameters

Measure and source mA, Volts DC, frequency, and resistance

Store and recall frequently used calibration set ups

<h3 class="md-block-header-three">Fluke 725 Multifunction Process Calibrator</h3> With the Fluke 725 Multifunction Process Calibrator you can easily source and measure almost any process parameter and test almost any process device. Measure and source mA, volts, temperature (RTDs and thermocouples), frequency, ohms, and pressure, using optional pressure modules. From the moment you pick it up, the Fluke 725 is ready to perform as a powerful, yet easy-to-use field calibrator. Its simple controls, without menus, make operation easy and the backlit display provides better visibility in poor light. It features a small, streamline shape and a rugged, reliable design that make it ideal for standing up to harsh field conditions. Versatile troubleshooting toolPower transmitters during test using the loop supply with simultaneous mA measurement so you can test a transmitter out of circuit and better isolate problems. The 725 can also test a variety of fast pulsed RTD transmitters and PLCs (Programmable logic controllers), with pulses as short as 10 ms.Source mA with simultaneous pressure measurement to conduct valve and I/P (Input current/Output pressure) tests in a single device. You can also test flow meters with frequency and CPM (counts per minute) functions and perform fast linearity tests with auto-step and auto-ramp features so you can quickly verify the mA signal at different output levels.For more precision, pulse sourcing, pulse counting (totalizing) consider the Fluke 726 Precision Multifunction Calibrator.For documenting and HART communication built into your calibrator, consider the Fluke 754 Documenting Process Calibrator with HART. <ul class="md-block-unordered-list-item"><li>Calibration of both temperature and pressure transmitters</li><li>Measure/source/simulate mA loop parameters</li><li>Measure and source mA, Volts DC, frequency, and resistance</li><li>Built-in 24 V loop power supply</li><li>Store and recall frequently used calibration set ups</li></ul>

<h3>Fluke 725 Multifunction Process Calibrator</h3>
&nbsp;With the Fluke 725 Multifunction Process Calibrator you can easily source and measure almost any process parameter and test almost any process device. Measure and source mA, volts, temperature (RTDs and thermocouples), frequency, ohms, and pressure, using optional pressure modules. From the moment you pick it up, the Fluke 725 is ready to perform as a powerful, yet easy-to-use field calibrator. Its simple controls, without menus, make operation easy and the backlit display provides better visibility in poor light. It features a small, streamline shape and a rugged, reliable design that make it ideal for standing up to harsh field conditions.&nbsp;&nbsp;
Versatile troubleshooting tool
Power transmitters during test using the loop supply with simultaneous mA measurement so you can test a transmitter out of circuit and better isolate problems. The 725 can also test a variety of fast pulsed RTD transmitters and PLCs (Programmable logic controllers), with pulses as short as 10 ms.
Source mA with simultaneous pressure measurement to conduct valve and I/P (Input current/Output pressure) tests in a single device. You can also test flow meters with frequency and CPM (counts per minute) functions and perform fast linearity tests with auto-step and auto-ramp features so you can quickly verify the mA signal at different output levels.
For more precision, pulse sourcing, pulse counting (totalizing) consider the Fluke 726 Precision Multifunction Calibrator.
For documenting and HART communication built into your calibrator, consider the Fluke 754 Documenting Process Calibrator with HART.&nbsp;
<ul>
<li>Calibration of both temperature and pressure transmitters</li>
<li>Measure/source/simulate mA loop parameters</li>
<li>Measure and source mA, Volts DC, frequency, and resistance</li>
<li>Built-in 24 V loop power supply</li>
<li>Store and recall frequently used calibration set ups</li>
</ul>

Extech

ACISION

Center

TRIPLETT

PCE Instruments

MEGGER

AMPROBE

Other Measuring Tools

Electrical Power Testing

Clamp Meters

Industrial Thermometer

Sound & Vibration Meters

Thermal Imaging Cameras

Humidity & Temperature

Multimeter Leads

CETM

fluke 725 multifunction process calibrator kalibrator proses multifungsi calibrators fluke/福禄克 多功能过程校准器 福禄克

fluke-725-multifunction-process-calibrator

The DPI 800 Series is a complete range of advanced, robust and simple to use hand-held instruments. Highly cost effective, these tools are ideal for test/calibration of many popular process parameters. Advanced features and technical innovations address more applications in less time and deliver results you can rely on.


The DPI 880 multi-function calibrator is an ultra compact and simple to use tool for testing, configuring and calibrating virtually all process parameters. it measures, sources and stimulates mA, mV, V, RTDs, thermocouples, ohms, frequency, pulses and pressures, captures switch values and provides 24v loop power.


Features
• Sources and reads mA, mV, V, ohms, frequency and pulses 
• Simulates and reads 8 RTDs and 12 thermocouples 
• 32 pressure modules from 10 in H2 0 to 10,000 psi (25 mbar to 700 bar) 
• Simultaneous dual reading capability 
• Automatic switch test and pressure leak test 
• 1000 point data storage with real time clock 
• 24 V loop power supply 
• HART® loop resistor 
• Large backlit display 
• Robust and weatherproof 
• Compact, simple to use, easy to carry 
• Convenient one-handed operation 
• Plug/play connector for IDOS universal pressure modules

The DPI 800 Series is a complete range of advanced, robust and simple to use hand-held instruments. Highly cost effective, these tools are ideal for test/calibration of many popular process parameters. Advanced features and technical innovations address more applications in less time and deliver results you can rely on. The DPI 880 multi-function calibrator is an ultra compact and simple to use tool for testing, configuring and calibrating virtually all process parameters. it measures, sources and stimulates mA, mV, V, RTDs, thermocouples, ohms, frequency, pulses and pressures, captures switch values and provides 24v loop power. Features • Sources and reads mA, mV, V, ohms, frequency and pulses • Simulates and reads 8 RTDs and 12 thermocouples • 32 pressure modules from 10 in H2 0 to 10,000 psi (25 mbar to 700 bar) • Simultaneous dual reading capability • Automatic switch test and pressure leak test • 1000 point data storage with real time clock • 24 V loop power supply • HART® loop resistor • Large backlit display • Robust and weatherproof • Compact, simple to use, easy to carry • Convenient one-handed operation • Plug/play connector for IDOS universal pressure modules

The DPI 800 Series is a complete range of advanced, robust and simple to use hand-held instruments. Highly cost effective, these tools are ideal for test/calibration of many popular process parameters. Advanced features and technical innovations address more applications in less time and deliver results you can rely on. 
 
 
The DPI 880 multi-function calibrator is an ultra compact and simple to use tool for testing, configuring and calibrating virtually all process parameters. it measures, sources and stimulates mA, mV, V, RTDs, thermocouples, ohms, frequency, pulses and pressures, captures switch values and provides 24v loop power. 

Features 
• Sources and reads mA, mV, V, ohms, frequency and pulses 
• Simulates and reads 8 RTDs and 12 thermocouples 
• 32 pressure modules from 10 in H2 0 to 10,000 psi (25 mbar to 700 bar) 
• Simultaneous dual reading capability 
• Automatic switch test and pressure leak test 
• 1000 point data storage with real time clock 
• 24 V loop power supply 
• HART® loop resistor 
• Large backlit display 
• Robust and weatherproof 
• Compact, simple to use, easy to carry 
• Convenient one-handed operation 
• Plug/play connector for IDOS universal pressure modules

DPI 880

Adelene

Others

Testo

Baker Hughes

Senze Instruments

ADDITEL

Daihan

Isuzu

Weight, Force & Pressure Gauges

Hand Pumps

Hygrometers

Temperature Data Logger

Food Thermometers

Adelene Teow

Druck multi-function Calibrator

druck multi-function calibrator kalibrator multi-fungsi pressure measurement pengukuran tekanan pelbagai fungsi pengukur druck/德鲁克 多功能校准器 德鲁克

druck-multi-function-calibrator

 Fluke's 789 combined multimeter and current loop calibrator features double troubleshooting capabilities, a mA loop calibrator and safety rated digital multimeter have been combined into one compact tool for easy measurement.

Wireless monitoring is made easy with Fluke Connect® mobile app and desktop software compatibility, this allows users to easily share data from anywhere.
Measure ac and dc current, ac and dc volts, continuity, resistance and frequency giving you more capability in less instruments. Key mA loop functions also include simultaneous mA, % scale readout, 20mA current source/simulate and 24 V loop power supply. Featuring a large dual display, an externally accessible battery, easy to use soft press buttons and dial this is the perfect user-friendly addition to any troubleshooting kit.

• 18°C to 28 °C temperature range (for 1 year after calibration)
• Diode test 2.000 V (shows diode voltage drop)
• Simultaneous mA and % scale readout
• Up to 20 kHz frequency measurement
• Min/Max/Average/Hold/Relative modes
• Continuity beeper
• HART mode setting with loop power (adds 250 ohm resistor)
• 20 mA dc current source/measure/simulate
• Designed in accordance with IEC 1010-1, ANSI/ISA S82.01-1994 and CAN/CSA C22.2 No 1010.1-92 

<h3 class="md-block-header-three">Fluke 789 Multi Function Calibrator</h3><ul class="md-block-unordered-list-item"><li>Battery Life	140 h</li><li>Battery Type	AA</li><li>Power Source	Battery</li><li>Weight	610g</li><li>Height	50mm</li><li>Length	203mm</li><li>Maximum Operating Temperature	+55°C</li><li>Minimum Operating Temperature	-20°C</li><li>Model Number p	789</li><li>Width	100mm</li></ul> Fluke&#x27;s 789 combined multimeter and current loop calibrator features double troubleshooting capabilities, a mA loop calibrator and safety rated digital multimeter have been combined into one compact tool for easy measurement.Wireless monitoring is made easy with Fluke Connect® mobile app and desktop software compatibility, this allows users to easily share data from anywhere. Measure ac and dc current, ac and dc volts, continuity, resistance and frequency giving you more capability in less instruments. Key mA loop functions also include simultaneous mA, % scale readout, 20mA current source/simulate and 24 V loop power supply. Featuring a large dual display, an externally accessible battery, easy to use soft press buttons and dial this is the perfect user-friendly addition to any troubleshooting kit.Features and Benefits:• 18°C to 28 °C temperature range (for 1 year after calibration) • Diode test 2.000 V (shows diode voltage drop) • Simultaneous mA and % scale readout • Up to 20 kHz frequency measurement • Min/Max/Average/Hold/Relative modes • Continuity beeper • HART mode setting with loop power (adds 250 ohm resistor) • 20 mA dc current source/measure/simulate • Designed in accordance with IEC 1010-1, ANSI/ISA S82.01-1994 and CAN/CSA C22.2 No 1010.1-92

<h3>Fluke 789 Multi Function Calibrator</h3>
<ul>
<li>Battery Life	140 h</li>
<li>Battery Type	AA</li>
<li>Power Source	Battery</li>
<li>Weight	610g</li>
<li>Height	50mm</li>
<li>Length	203mm</li>
<li>Maximum Operating Temperature	+55°C</li>
<li>Minimum Operating Temperature	-20°C</li>
<li>Model Number p	789</li>
<li>Width	100mm</li>
</ul>
&nbsp;Fluke's 789 combined multimeter and current loop calibrator features double troubleshooting capabilities, a mA loop calibrator and safety rated digital multimeter have been combined into one compact tool for easy measurement.
Wireless monitoring is made easy with Fluke Connect® mobile app and desktop software compatibility, this allows users to easily share data from anywhere. 
Measure ac and dc current, ac and dc volts, continuity, resistance and frequency giving you more capability in less instruments. Key mA loop functions also include simultaneous mA, % scale readout, 20mA current source/simulate and 24 V loop power supply. Featuring a large dual display, an externally accessible battery, easy to use soft press buttons and dial this is the perfect user-friendly addition to any troubleshooting kit.
Features and Benefits:
• 18°C to 28 °C temperature range (for 1 year after calibration) 
• Diode test 2.000 V (shows diode voltage drop) 
• Simultaneous mA and % scale readout 
• Up to 20 kHz frequency measurement 
• Min/Max/Average/Hold/Relative modes 
• Continuity beeper 
• HART mode setting with loop power (adds 250 ohm resistor) 
• 20 mA dc current source/measure/simulate 
• Designed in accordance with IEC 1010-1, ANSI/ISA S82.01-1994 and CAN/CSA C22.2 No 1010.1-92&nbsp;

Fluke 789 Process Meter Users Manual

Fluke 789 Current Loop Calibrator

Guide - 789/787B

Fluke 789 Multi Function Calibrator

fluke 789 multi function calibrator kalibrator multifungsi calibrators fluke/福禄克 多功能校准器 福禄克

fluke-789-multi-function-calibrator

Piecal 820 Multifunction Process Calibrator 

Lighten up your toolbox
Pocket sized calibrator replaces toolbox of single function devices

Technician friendly operation
Intuitive EZ-DIAL double click menu makes it easier to setup than other multifunction calibrators. Uses the same menus as the single function PIE Evolution calibrators. Icons on the display indicate where to plug in the test leads.

Use it as a milliamp and voltage calibrator
Source 0.00 to 24.00 mA, 0.00 to 10.25 VDC and 0.00 to 80.00 mV
Read to 24.00 mA, 00.00 to 10.,25 VDC, 0.0 to 60.0 VDC, 00.00 to 80.00 mV
Simulate 2 Wire transmitters
Power up transmitters and loops with built-in 24 V power supply
Simplify HART hook ups with built in 250 ohm resistor

Calibrate directly in temperature (°C & °F)
The PIE 820 works with the instruments you use.
Thermocouple types J, K, T, E, R, S, B, N, G, C, D, L (J DIN), U (T DIN) and P(Platinel II)
RTD types Pt 100 Ohm (3850, 3902, 3916, 3926) & 1000 Ohm (3850)
Copper 10 & 50 Ohm, Nickel 110 and 120 Ohm

Checkout flow and vibration systems
Source & read frequency to 2000 CPM (Counts-Per-Minute), 999.99
Hz, 9999.9 Hz, 20.000 kHz

Troubleshoot loop & wiring problems
Beep out connections with the built-in continuity checker

Easy to read
Turn on the backlight & easily see the display in dark areas of the plant

Quickly set any three outputs plus automatic stepping & ramping
Easily set any value quickly with the adjustable EZ-DIAL; store any three output settings for instant recall with the EZ-CHECK switch.
Choose between 2, 3, 5 & 11 steps to automatically increment the output in 100%, 50%, 25% or 10% of span.
Select RAMP to smoothly increase and decrease the output between Zero and Span.
Set step/ramp time to match your system from 5, 6, 7, 8, 10, 15, 20, 25, 30 and 60 seconds

<h3 class="md-block-header-three">Piecal 820 Multifunction Process Calibrator </h3><ul class="md-block-unordered-list-item"><li>Lighten up your toolbox Pocket sized calibrator replaces toolbox of single function devices</li><li>Technician friendly operation Intuitive EZ-DIAL double click menu makes it easier to setup than other multifunction calibrators. Uses the same menus as the single function PIE Evolution calibrators. Icons on the display indicate where to plug in the test leads.</li><li>Use it as a milliamp and voltage calibrator Source 0.00 to 24.00 mA, 0.00 to 10.25 VDC and 0.00 to 80.00 mV Read to 24.00 mA, 00.00 to 10.,25 VDC, 0.0 to 60.0 VDC, 00.00 to 80.00 mV Simulate 2 Wire transmitters Power up transmitters and loops with built-in 24 V power supply Simplify HART hook ups with built in 250 ohm resistor</li><li>Calibrate directly in temperature (°C &amp; °F) The PIE 820 works with the instruments you use. Thermocouple types J, K, T, E, R, S, B, N, G, C, D, L (J DIN), U (T DIN) and P(Platinel II) RTD types Pt 100 Ohm (3850, 3902, 3916, 3926) &amp; 1000 Ohm (3850) Copper 10 &amp; 50 Ohm, Nickel 110 and 120 Ohm</li><li>Checkout flow and vibration systems Source &amp; read frequency to 2000 CPM (Counts-Per-Minute), 999.99 Hz, 9999.9 Hz, 20.000 kHz</li><li>Troubleshoot loop &amp; wiring problems Beep out connections with the built-in continuity checker</li><li>Easy to read Turn on the backlight &amp; easily see the display in dark areas of the plant</li><li>Quickly set any three outputs plus automatic stepping &amp; ramping Easily set any value quickly with the adjustable EZ-DIAL; store any three output settings for instant recall with the EZ-CHECK switch. Choose between 2, 3, 5 &amp; 11 steps to automatically increment the output in 100%, 50%, 25% or 10% of span. Select RAMP to smoothly increase and decrease the output between Zero and Span. Set step/ramp time to match your system from 5, 6, 7, 8, 10, 15, 20, 25, 30 and 60 seconds</li></ul>

<h3>Piecal 820 Multifunction Process Calibrator&nbsp;</h3>
<ul>
<li>Lighten up your toolbox 
Pocket sized calibrator replaces toolbox of single function devices</li>
<li>Technician friendly operation 
Intuitive EZ-DIAL double click menu makes it easier to setup than other multifunction calibrators. Uses the same menus as the single function PIE Evolution calibrators. Icons on the display indicate where to plug in the test leads.</li>
<li>Use it as a milliamp and voltage calibrator 
Source 0.00 to 24.00 mA, 0.00 to 10.25 VDC and 0.00 to 80.00 mV 
Read to 24.00 mA, 00.00 to 10.,25 VDC, 0.0 to 60.0 VDC, 00.00 to 80.00 mV 
Simulate 2 Wire transmitters 
Power up transmitters and loops with built-in 24 V power supply 
Simplify HART hook ups with built in 250 ohm resistor</li>
<li>Calibrate directly in temperature (°C &amp; °F) 
The PIE 820 works with the instruments you use. 
Thermocouple types J, K, T, E, R, S, B, N, G, C, D, L (J DIN), U (T DIN) and P(Platinel II) 
RTD types Pt 100 Ohm (3850, 3902, 3916, 3926) &amp; 1000 Ohm (3850) 
Copper 10 &amp; 50 Ohm, Nickel 110 and 120 Ohm</li>
<li>Checkout flow and vibration systems 
Source &amp; read frequency to 2000 CPM (Counts-Per-Minute), 999.99 
Hz, 9999.9 Hz, 20.000 kHz</li>
<li>Troubleshoot loop &amp; wiring problems 
Beep out connections with the built-in continuity checker</li>
<li>Easy to read 
Turn on the backlight &amp; easily see the display in dark areas of the plant</li>
<li>Quickly set any three outputs plus automatic stepping &amp; ramping 
Easily set any value quickly with the adjustable EZ-DIAL; store any three output settings for instant recall with the EZ-CHECK switch. 
Choose between 2, 3, 5 &amp; 11 steps to automatically increment the output in 100%, 50%, 25% or 10% of span. 
Select RAMP to smoothly increase and decrease the output between Zero and Span. 
Set step/ramp time to match your system from 5, 6, 7, 8, 10, 15, 20, 25, 30 and 60 seconds</li>
</ul>

Piecal 820 Multifunction Process Calibrator

piecal 820 multifunction process calibrator kalibrator proses multifungsi calibrators piecal/皮耶卡尔 多功能过程校准器 皮耶卡尔

piecal-820-multifunction-process-calibrator

FLUKE 726 PRECISION MULTIFUNCTION CALIBRATORS

Process calibration designed specifically for process industries

The Fluke 726 is a precise and powerful, yet easy-to-use, field calibrator. It features broad workload coverage, calibration power, and unsurpassed accuracy needed by process professionals. It measures and sources almost all process parameters to calibrate almost anything. Use it to test sensors and valves, and to test and calibrate transmitters. The 726 interprets results without the help of a calculator and stores measurement data for later analysis.

This precision multifunction calibrator measures volts, mA, pressure, RTDs, thermocouples, frequency, and resistance to test sensors and transmitters. The 726 also sources and simulates volts, mA, thermocouples, RTDs, frequency to calibrate transmitters. Measures and/or sources pressure using when paired with any of the 50 Fluke 750P series Pressure Modules to test and calibrate pressure transmitters and other devices. The 726 can also:

Source mA with simultaneous pressure measurement to conduct valve and I/P test

Conduct enhanced flowmeter testing with frequency totalizer and frequency pulse train source mode

The 726 has built-in features that make it easier to use in nearly any measurement situation. From its ability to store frequently used test setups, to programming custom RTD probe calibration constants for enhanced temperature measurement, or the integrated voltage input protection design that improves reliability, the 726 is built to perform. The use of two separate channels even allows you to measure, source, or view process signals simultaneously. The backlit display provides better visibility in low-light conditions, and the standard 3-year warranty provides extra confidence that the 726 will be there when you need it to be.

Capture the set, reset, and deadband of a pressure switch with the integrated switch test

Calculate the transmitter error % to interpret calibration results without the use of a calculator

Perform fast linearity tests with the auto-step and auto-ramp features

Power a transmitter during test using 24 V loop supply and simultaneous mA measurement

<h3 class="md-block-header-three">FLUKE 726 PRECISION MULTIFUNCTION CALIBRATORS</h3><h3 class="md-block-header-three">Process calibration designed specifically for process industries</h3>The Fluke 726 is a precise and powerful, yet easy-to-use, field calibrator. It features broad workload coverage, calibration power, and unsurpassed accuracy needed by process professionals. It measures and sources almost all process parameters to calibrate almost anything. Use it to test sensors and valves, and to test and calibrate transmitters. The 726 interprets results without the help of a calculator and stores measurement data for later analysis.<h3 class="md-block-header-three">Measurement capabilities</h3>This precision multifunction calibrator measures volts, mA, pressure, RTDs, thermocouples, frequency, and resistance to test sensors and transmitters. The 726 also sources and simulates volts, mA, thermocouples, RTDs, frequency to calibrate transmitters. Measures and/or sources pressure using when paired with any of the 50 Fluke 750P series Pressure Modules to test and calibrate pressure transmitters and other devices. The 726 can also:<ul class="md-block-unordered-list-item"><li>Source mA with simultaneous pressure measurement to conduct valve and I/P test</li><li>Conduct enhanced flowmeter testing with frequency totalizer and frequency pulse train source mode</li></ul><h3 class="md-block-header-three">Designed for ease of use</h3>The 726 has built-in features that make it easier to use in nearly any measurement situation. From its ability to store frequently used test setups, to programming custom RTD probe calibration constants for enhanced temperature measurement, or the integrated voltage input protection design that improves reliability, the 726 is built to perform. The use of two separate channels even allows you to measure, source, or view process signals simultaneously. The backlit display provides better visibility in low-light conditions, and the standard 3-year warranty provides extra confidence that the 726 will be there when you need it to be.You can also use the 726 to:<ul class="md-block-unordered-list-item"><li>Capture the set, reset, and deadband of a pressure switch with the integrated switch test</li><li>Calculate the transmitter error % to interpret calibration results without the use of a calculator</li><li>Perform fast linearity tests with the auto-step and auto-ramp features</li><li>Power a transmitter during test using 24 V loop supply and simultaneous mA measurement</li></ul>

<h3>FLUKE 726 PRECISION MULTIFUNCTION CALIBRATORS</h3>
<h3>Process calibration designed specifically for process industries</h3>
The Fluke 726 is a precise and powerful, yet easy-to-use, field calibrator. It features broad workload coverage, calibration power, and unsurpassed accuracy needed by process professionals. It measures and sources almost all process parameters to calibrate almost anything. Use it to test sensors and valves, and to test and calibrate transmitters. The 726 interprets results without the help of a calculator and stores measurement data for later analysis.
<h3>Measurement capabilities</h3>
This precision multifunction calibrator measures volts, mA, pressure, RTDs, thermocouples, frequency, and resistance to test sensors and transmitters. The 726 also sources and simulates volts, mA, thermocouples, RTDs, frequency to calibrate transmitters. Measures and/or sources pressure using when paired with any of the 50 Fluke 750P series Pressure Modules to test and calibrate pressure transmitters and other devices. The 726 can also:
<ul>
<li>Source mA with simultaneous pressure measurement to conduct valve and I/P test</li>
<li>Conduct enhanced flowmeter testing with frequency totalizer and frequency pulse train source mode</li>
</ul>
<h3>Designed for ease of use</h3>
The 726 has built-in features that make it easier to use in nearly any measurement situation. From its ability to store frequently used test setups, to programming custom RTD probe calibration constants for enhanced temperature measurement, or the integrated voltage input protection design that improves reliability, the 726 is built to perform. The use of two separate channels even allows you to measure, source, or view process signals simultaneously. The backlit display provides better visibility in low-light conditions, and the standard 3-year warranty provides extra confidence that the 726 will be there when you need it to be.
You can also use the 726 to:
<ul>
<li>Capture the set, reset, and deadband of a pressure switch with the integrated switch test</li>
<li>Calculate the transmitter error % to interpret calibration results without the use of a calculator</li>
<li>Perform fast linearity tests with the auto-step and auto-ramp features</li>
<li>Power a transmitter during test using 24 V loop supply and simultaneous mA measurement</li>
</ul>

Fluke 726 Precision Multifunction Calibrators

fluke 726 precision multifunction calibrators kalibrator multifungsi presisi fluke/福禄克 精密多功能校准器 福禄克

fluke-726-precision-multifunction-calibrators

Datasheet

Manual

RS PRO T&M Selection Guide 2020_UK

Siemens

STANLEY

DEUTSCH

Facom

RAPID

ECLIPSE TOOLS

Plugs & Connector 

Button Switch

Aluminium Capacitors

Rs Pro 1749557 Rs 135 Multi Function Calibrator

rs pro 1749557 135 multi function calibrator kalibrator fungsi calibrators 多功能校准器 rs专业版

rs-pro-1749557-rs-135-multi-function-calibrator

 Fluke 754 Documenting Process Calibrator-HART

Complete pressure, temperature, and mA loop calibrator

Troubleshoot and calibrate HART smart digital transmitters

Create calibration procedures and automatically document results

Connect to calibration management software 

Whether you're calibrating instruments, troubleshooting a problem, or running routine maintenance, the Fluke 754 with HART® communication can help you get the job done faster. It does so many different tasks, so quickly and so well, it's the only process calibrator you need to carry. This rugged, reliable integrated communicating calibrator is ideal for calibrating, maintaining, and troubleshooting HART and other instrumentation.  

The 754 is a power multifunction documenting calibrator that you can use to download procedures, lists, and instructions created with software; or upload data for printing, archiving, and analysis. The powerful built-in HART interface is capable of performing nearly all the day-to-day tasks you now perform with a separate communicator.

In fact, the 754 does the work of several tools. It sources, simulates and measures pressure, temperature, and electrical signals with one rugged, hand-held device. For documentation, the 754 automates calibration procedures and captures your data. And, of course, it helps you meet rigorous standards like ISO 9000, FDA, EPA and OSHA regulations. Plus, the new improved graphical screen, Li-Ion battery for longer life, USB port, and accessories help you work smarter and faster.

To create a seamless/paperless calibration management system consider adding Fluke DPCTrack2 Calibration Management software for use with your Fluke 753 and 754 or even legacy Fluke 743 and 744 calibrators.

Handles fast pulsed RTD transmitters and PLCs, with pulses as short as 1 ms

Measures/sources pressure using any of 29 Fluke 700Pxx Pressure Modules

Creates and runs automated as-found/as-left procedures to satisfy quality programs or regulations, and records and documents results

Holds up to a full week of downloaded procedures and calibration results

Uses many features like autostep, custom units, user-entered values during test, one-point and two-point switch testing, square root DP flow testing, programmable measurement delay and more

Provides easy-to-use multi-lingual interface

Features a bright white dual display for reading both sourced and measured parameters simultaneously

Includes rechargeable Li-Ion battery for 10 hour uninterrupted use

Comes with three-year warranty and DPC/Track Sample software

Offers compatibility with many asset management software packages

<h3 class="md-block-header-three"> Fluke 754 Documenting Process Calibrator-HART</h3><ul class="md-block-unordered-list-item"><li>Complete pressure, temperature, and mA loop calibrator</li><li>Troubleshoot and calibrate HART smart digital transmitters</li><li>Create calibration procedures and automatically document results</li><li>Connect to calibration management software </li></ul>Whether you&#x27;re calibrating instruments, troubleshooting a problem, or running routine maintenance, the Fluke 754 with HART® communication can help you get the job done faster. It does so many different tasks, so quickly and so well, it&#x27;s the only process calibrator you need to carry. This rugged, reliable integrated communicating calibrator is ideal for calibrating, maintaining, and troubleshooting HART and other instrumentation. The 754 is a power multifunction documenting calibrator that you can use to download procedures, lists, and instructions created with software; or upload data for printing, archiving, and analysis. The powerful built-in HART interface is capable of performing nearly all the day-to-day tasks you now perform with a separate communicator.In fact, the 754 does the work of several tools. It sources, simulates and measures pressure, temperature, and electrical signals with one rugged, hand-held device. For documentation, the 754 automates calibration procedures and captures your data. And, of course, it helps you meet rigorous standards like ISO 9000, FDA, EPA and OSHA regulations. Plus, the new improved graphical screen, Li-Ion battery for longer life, USB port, and accessories help you work smarter and faster.To create a seamless/paperless calibration management system consider adding Fluke DPCTrack2 Calibration Management software for use with your Fluke 753 and 754 or even legacy Fluke 743 and 744 calibrators.Other useful features:<ul class="md-block-unordered-list-item"><li>Handles fast pulsed RTD transmitters and PLCs, with pulses as short as 1 ms</li><li>Measures/sources pressure using any of 29 Fluke 700Pxx Pressure Modules</li><li>Creates and runs automated as-found/as-left procedures to satisfy quality programs or regulations, and records and documents results</li><li>Holds up to a full week of downloaded procedures and calibration results</li><li>Uses many features like autostep, custom units, user-entered values during test, one-point and two-point switch testing, square root DP flow testing, programmable measurement delay and more</li><li>Provides easy-to-use multi-lingual interface</li><li>Features a bright white dual display for reading both sourced and measured parameters simultaneously</li><li>Includes rechargeable Li-Ion battery for 10 hour uninterrupted use</li><li>Comes with three-year warranty and DPC/Track Sample software</li><li>Offers compatibility with many asset management software packages</li></ul>

<h3> Fluke 754 Documenting Process Calibrator-HART</h3>
<ul>
<li>Complete pressure, temperature, and mA loop calibrator</li>
<li>Troubleshoot and calibrate HART smart digital transmitters</li>
<li>Create calibration procedures and automatically document results</li>
<li>Connect to calibration management software&nbsp;</li>
</ul>
Whether you're calibrating instruments, troubleshooting a problem, or running routine maintenance, the Fluke 754 with HART® communication can help you get the job done faster. It does so many different tasks, so quickly and so well, it's the only process calibrator you need to carry. This rugged, reliable integrated communicating calibrator is ideal for calibrating, maintaining, and troubleshooting HART and other instrumentation.&nbsp;&nbsp;
The 754 is a power multifunction documenting calibrator that you can use to download procedures, lists, and instructions created with software; or upload data for printing, archiving, and analysis. The powerful built-in HART interface is capable of performing nearly all the day-to-day tasks you now perform with a separate communicator.
In fact, the 754 does the work of several tools. It sources, simulates and measures pressure, temperature, and electrical signals with one rugged, hand-held device. For documentation, the 754 automates calibration procedures and captures your data. And, of course, it helps you meet rigorous standards like ISO 9000, FDA, EPA and OSHA regulations. Plus, the new improved graphical screen, Li-Ion battery for longer life, USB port, and accessories help you work smarter and faster.
To create a seamless/paperless calibration management system consider adding Fluke DPCTrack2 Calibration Management software for use with your Fluke 753 and 754 or even legacy Fluke 743 and 744 calibrators.
Other useful features:
<ul>
<li>Handles fast pulsed RTD transmitters and PLCs, with pulses as short as 1 ms</li>
<li>Measures/sources pressure using any of 29 Fluke 700Pxx Pressure Modules</li>
<li>Creates and runs automated as-found/as-left procedures to satisfy quality programs or regulations, and records and documents results</li>
<li>Holds up to a full week of downloaded procedures and calibration results</li>
<li>Uses many features like autostep, custom units, user-entered values during test, one-point and two-point switch testing, square root DP flow testing, programmable measurement delay and more</li>
<li>Provides easy-to-use multi-lingual interface</li>
<li>Features a bright white dual display for reading both sourced and measured parameters simultaneously</li>
<li>Includes rechargeable Li-Ion battery for 10 hour uninterrupted use</li>
<li>Comes with three-year warranty and DPC/Track Sample software</li>
<li>Offers compatibility with many asset management software packages</li>
</ul>

Fluke 754 Documenting Process Calibrator-HART

fluke 754 documenting process calibrator-hart kalibrator proses pendokumentasian 754-hart calibrators penentukuran-hart fluke/福禄克 文档化过程校准器-hart 福禄克

fluke-754-documenting-process-calibrator-hart

Piecal 541 Frequency Process Calibrator With Totalizer Function

 The PIE 541 Frequency Calibrator is designed for calibration, testing, and diagnosing turbine meters, frequency counters, vibration systems, tachometers, vortex shedders, integrators, and any other frequency devices in the shop, plant or field. Save hours of time compared to other calibration methods. When calibrating a totalizer, the Model 541 eliminates the need of a stop watch. Set the number of pulses and number of minutes required and it automatically stops when the selected number of pulses has been sent to the totalizer! The PIE 541 has a handy LED indicator showing gate time for easy trigger level adjustment. The LED also pulses with the frequency output for calibration of optical pickups.  

5 ranges from 1 CPH (Count-Per-Hour) to 20.000 KHz for source and read

Totalize inputs/outputs from 1 to 99999 pulses in 1.0 to 100.0 minutes.

Read a wide range of frequencies and waveforms from 50 mV to 120V peak.

Source sine and square waves with zero based or zero crossing waveforms.

Adjustable output amplitude from 100 mV to 12 V peak-to-peak.

Gate trigger LED flashes in synch with the output frequency to calibrate optical pickups. This also allows easy adjustment of the attenuation for proper gate triggering.

EZ-Dial™ knob easily adjusts output by 1; press down and while turning the knob for a faster dialing speed

EZ-Check™ switch for instant 0% and 100% span adjustments

Store new EZ-Check™ values by pressing the EZ-Dial™ knob

Uses a standard 9V Alkaline battery with easy access to the battery compartment

<h3 class="md-block-header-three">Piecal 541 Frequency Process Calibrator With Totalizer Function</h3> The PIE 541 Frequency Calibrator is designed for calibration, testing, and diagnosing turbine meters, frequency counters, vibration systems, tachometers, vortex shedders, integrators, and any other frequency devices in the shop, plant or field. Save hours of time compared to other calibration methods. When calibrating a totalizer, the Model 541 eliminates the need of a stop watch. Set the number of pulses and number of minutes required and it automatically stops when the selected number of pulses has been sent to the totalizer! The PIE 541 has a handy LED indicator showing gate time for easy trigger level adjustment. The LED also pulses with the frequency output for calibration of optical pickups. <ul class="md-block-unordered-list-item"><li>Accuracy: ± 0.005% of range</li><li>5 ranges from 1 CPH (Count-Per-Hour) to 20.000 KHz for source and read</li><li>Totalize inputs/outputs from 1 to 99999 pulses in 1.0 to 100.0 minutes.</li><li>Read a wide range of frequencies and waveforms from 50 mV to 120V peak.</li><li>Source sine and square waves with zero based or zero crossing waveforms.</li><li>Adjustable output amplitude from 100 mV to 12 V peak-to-peak.</li><li>Gate trigger LED flashes in synch with the output frequency to calibrate optical pickups. This also allows easy adjustment of the attenuation for proper gate triggering.</li><li>EZ-Dial™ knob easily adjusts output by 1; press down and while turning the knob for a faster dialing speed</li><li>EZ-Check™ switch for instant 0% and 100% span adjustments</li><li>Store new EZ-Check™ values by pressing the EZ-Dial™ knob</li><li>Uses a standard 9V Alkaline battery with easy access to the battery compartment</li><li>Superior battery life of 45 hours under typical continuous usage</li><li>Small, tough and protected to 60V</li><li>Carrying case included and optional Test Data available</li><li>NIST Traceable Calibration Certificate included</li></ul>

<h3>Piecal 541 Frequency Process Calibrator With Totalizer Function</h3>
&nbsp;The PIE 541 Frequency Calibrator is designed for calibration, testing, and diagnosing turbine meters, frequency counters, vibration systems, tachometers, vortex shedders, integrators, and any other frequency devices in the shop, plant or field. Save hours of time compared to other calibration methods. When calibrating a totalizer, the Model 541 eliminates the need of a stop watch. Set the number of pulses and number of minutes required and it automatically stops when the selected number of pulses has been sent to the totalizer! The PIE 541 has a handy LED indicator showing gate time for easy trigger level adjustment. The LED also pulses with the frequency output for calibration of optical pickups.&nbsp;&nbsp;
<ul>
<li>Accuracy: ± 0.005% of range</li>
<li>5 ranges from 1 CPH (Count-Per-Hour) to 20.000 KHz for source and read</li>
<li>Totalize inputs/outputs from 1 to 99999 pulses in 1.0 to 100.0 minutes.</li>
<li>Read a wide range of frequencies and waveforms from 50 mV to 120V peak.</li>
<li>Source sine and square waves with zero based or zero crossing waveforms.</li>
<li>Adjustable output amplitude from 100 mV to 12 V peak-to-peak.</li>
<li>Gate trigger LED flashes in synch with the output frequency to calibrate optical pickups. This also allows easy adjustment of the attenuation for proper gate triggering.</li>
<li>EZ-Dial™ knob easily adjusts output by 1; press down and while turning the knob for a faster dialing speed</li>
<li>EZ-Check™ switch for instant 0% and 100% span adjustments</li>
<li>Store new EZ-Check™ values by pressing the EZ-Dial™ knob</li>
<li>Uses a standard 9V Alkaline battery with easy access to the battery compartment</li>
<li>Superior battery life of 45 hours under typical continuous usage</li>
<li>Small, tough and protected to 60V</li>
<li>Carrying case included and optional Test Data available</li>
<li>NIST Traceable Calibration Certificate included</li>
</ul>

piecal 541 frequency process calibrator totalizer function kalibrator proses frekuensi dengan fungsi calibrators penentukur kekerapan penjumlahan 具有累加器功能的 piecal/皮耶卡尔 频率过程校准器 皮耶卡尔