Druck

Duratool

Fluke Networks

TENMARS

Test & Measurement

test-measurement

Air Quality Meters

air-quality-meters

Drill & Wire Gauges

drill-wire-gauges

EMF & Frequency Meters

emf-frequency-meters

Network Testers

network-testers

Weight, Force & Pressure Gauges

weight-force-pressure-gauges

Fluke Networks  FTK2000 Single Mode Fibre Optic Test Kit

Includes	1310 & 1550 Source, Case, Power Meter

Single-port, simultaneous dual-wavelength feature completes testing in half the time and saves measurements from both wavelengths into one record
Additional wavelengths of 1490nm and 1625nm
Check Active feature emits an audible tone and displays an icon when a live fibre is detected, eliminating the need to set up a measurement
FindFibreTM remote ID enables one individual to quickly identify cable connections or routings (especially useful at patch panels), eliminating the need for multiple technicians on opposite ends of a fibre link to match colour combinations
Min/Max capability automates precision tracking of intermittent power fluctuations
Large internal memory saves 1000 results which enable continuous testing and recording
LinkWare cable test management software helps to analyse test results and create professional test reports

The FKT2000 is a single mode fiber verification kit and can be used to:
Measure and locate high loss splices
Measure and locate high loss connections and breaks
Locate the end of a fibre
Find potential sources of errors caused by reflectance from dirty or poor connections
Detect live optical signals before it begins testing

CE certified
CSA certified
N10140 certified
Class 1 laser-safe

• SimpliFiber Pro optical power meter
• SimpliFiber Pro 1310/1550 source
• USB cable for PC communications
• Carrying case
• Getting Started Guide
• SimpliFiber Pro Product Manuals CD
• LinkWare Software CD 

<h3 class="md-block-header-three">Fluke Networks FTK2000 Single Mode Fibre Optic Test Kit</h3><ul class="md-block-unordered-list-item"><li> Cable Type	Single Mode</li><li>Equipment Type	Fibre Optic Test Kit</li><li>Wavelengths	1310 nm, 1550 nm</li><li>Resolution	0.01 dB</li><li>Interface Type	USB</li><li>Maximum Power Measurement	+10dBm</li><li>Battery Type	AA</li><li>Battery Life	50 h</li><li>Power Source	Battery</li><li>Includes	1310 &amp; 1550 Source, Case, Power Meter</li><li>Model Number p	FTK2000</li><li>Height	165mm</li><li>Length	80mm</li><li>Maximum Operating Temperature	+50°C</li><li>Minimum Operating Temperature	-10°C</li><li>Minimum Output Power	-7dBm</li><li>Weight	325g</li><li>Width	39mm</li></ul>Features and BenefitsSingle-port, simultaneous dual-wavelength feature completes testing in half the time and saves measurements from both wavelengths into one record Additional wavelengths of 1490nm and 1625nm Check Active feature emits an audible tone and displays an icon when a live fibre is detected, eliminating the need to set up a measurement FindFibreTM remote ID enables one individual to quickly identify cable connections or routings (especially useful at patch panels), eliminating the need for multiple technicians on opposite ends of a fibre link to match colour combinations Min/Max capability automates precision tracking of intermittent power fluctuations Large internal memory saves 1000 results which enable continuous testing and recording LinkWare cable test management software helps to analyse test results and create professional test reportsApplicationsThe FKT2000 is a single mode fiber verification kit and can be used to: Measure and locate high loss splices Measure and locate high loss connections and breaks Locate the end of a fibre Find potential sources of errors caused by reflectance from dirty or poor connections Detect live optical signals before it begins testingCertificationsCE certified CSA certified N10140 certified Class 1 laser-safeFTK2000 comes with:• SimpliFiber Pro optical power meter • SimpliFiber Pro 1310/1550 source • USB cable for PC communications • Carrying case • Getting Started Guide • SimpliFiber Pro Product Manuals CD • LinkWare Software CD

<h3>Fluke Networks FTK2000 Single Mode Fibre Optic Test Kit</h3>
<ul>
<li>&nbsp;Cable Type	Single Mode</li>
<li>Equipment Type	Fibre Optic Test Kit</li>
<li>Wavelengths	1310 nm, 1550 nm</li>
<li>Resolution	0.01 dB</li>
<li>Interface Type	USB</li>
<li>Maximum Power Measurement	+10dBm</li>
<li>Battery Type	AA</li>
<li>Battery Life	50 h</li>
<li>Power Source	Battery</li>
<li>Includes	1310 &amp; 1550 Source, Case, Power Meter</li>
<li>Model Number p	FTK2000</li>
<li>Height	165mm</li>
<li>Length	80mm</li>
<li>Maximum Operating Temperature	+50°C</li>
<li>Minimum Operating Temperature	-10°C</li>
<li>Minimum Output Power	-7dBm</li>
<li>Weight	325g</li>
<li>Width	39mm</li>
</ul>
Features and Benefits
Single-port, simultaneous dual-wavelength feature completes testing in half the time and saves measurements from both wavelengths into one record 
Additional wavelengths of 1490nm and 1625nm 
Check Active feature emits an audible tone and displays an icon when a live fibre is detected, eliminating the need to set up a measurement 
FindFibreTM remote ID enables one individual to quickly identify cable connections or routings (especially useful at patch panels), eliminating the need for multiple technicians on opposite ends of a fibre link to match colour combinations 
Min/Max capability automates precision tracking of intermittent power fluctuations 
Large internal memory saves 1000 results which enable continuous testing and recording 
LinkWare cable test management software helps to analyse test results and create professional test reports
Applications
The FKT2000 is a single mode fiber verification kit and can be used to: 
Measure and locate high loss splices 
Measure and locate high loss connections and breaks 
Locate the end of a fibre 
Find potential sources of errors caused by reflectance from dirty or poor connections 
Detect live optical signals before it begins testing
Certifications
CE certified 
CSA certified 
N10140 certified 
Class 1 laser-safe
FTK2000 comes with:
• SimpliFiber Pro optical power meter 
• SimpliFiber Pro 1310/1550 source 
• USB cable for PC communications 
• Carrying case 
• Getting Started Guide 
• SimpliFiber Pro Product Manuals CD 
• LinkWare Software CD&nbsp;

SimpliFiber Pro Optical Power Meter and Fiber Test Kits Users Manual

Datasheet

FindFiber Remote ID Source

RS Pro

SCHNEIDER ELECTRIC

FLUKE

Abus

Screw

O Ring

Surface Mount Resistors

Circular Connectors

Contactors

Bolts

Panel Mount Indicators 

Molded Case Circuit Breakers - MCCBs

Junction & Enclosure Box

Electrical Wire 

RS Components ETH SG

buyerIntroduction

Fluke Networks FTK2000 Single Mode Fibre Optic Test Kit

fluke networks ftk2000 single mode fibre optic test kit uji serat optik tunggal network testers ujian gentian mod networks/福禄克网络 单模光纤测试套件 福禄克网络

fluke-networks-ftk2000-single-mode-fibre-optic-test-kit

Fluke Networks VISIFAULT Single Mode & Multimode Visual Fault Locator

 Fix faults fast in your complex optical network applications with this fibre tester from FLUKE. Its bright red visible laser helps you carry out end-to-end continuity, polarity and location tracing checks quickly. This means it makes light work of diagnosing issues such as tight bends, breaks and bad connections in cables, connectors or patch cords. As it comes in an energy-absorbing holster over an impact-resistant housing, you can count on it being durable enough to withstand industrial hazards including bumps or drops.

• Choose between continuous and flashing modes for identifying faults across various applications
• Universal 2.5 mm adapter gives you easy links to SC, ST, FC and FJ connectors
• Heavy-duty tethered end cap protects the fibre adapter when not in use
• 3 to 4km range assures you it can handle testing over long distances
• Generous 80hr battery life makes it practical to take into the field

• Telecommunications networks
• Data storage facilities
• Broadcasting
• Medical equipment
 

<h3 class="md-block-header-three">Fluke Networks VISIFAULT Single Mode &amp; Multimode Visual Fault Locator</h3><ul class="md-block-unordered-list-item"><li>Cable Type	Single Mode &amp; Multimode</li><li>Equipment Type	Visual Fault Locator</li><li>Connector Type	Single Port</li><li>Wavelengths	650nm</li><li>Operation Test Distance	3 km, 4 km</li><li>Battery Type	AA</li><li>Battery Life	80 h</li><li>Power Source	Battery</li><li>Includes	Visual Fault Locator</li><li>Dimensions	157 x 52 x 37mm</li><li>Minimum Operating Temperature	0°C</li><li>Maximum Operating Temperature	+40°C</li><li>Height	157mm</li><li>Model Number p	VISIFAULT</li><li>Weight	180g</li><li>Width	37mm</li><li>Length	52mm</li></ul> Fix faults fast in your complex optical network applications with this fibre tester from FLUKE. Its bright red visible laser helps you carry out end-to-end continuity, polarity and location tracing checks quickly. This means it makes light work of diagnosing issues such as tight bends, breaks and bad connections in cables, connectors or patch cords. As it comes in an energy-absorbing holster over an impact-resistant housing, you can count on it being durable enough to withstand industrial hazards including bumps or drops.Features &amp; Benefits• Choose between continuous and flashing modes for identifying faults across various applications • Universal 2.5 mm adapter gives you easy links to SC, ST, FC and FJ connectors • Heavy-duty tethered end cap protects the fibre adapter when not in use • 3 to 4km range assures you it can handle testing over long distances • Generous 80hr battery life makes it practical to take into the fieldApplications• Telecommunications networks • Data storage facilities • Broadcasting • Medical equipment

<h3>Fluke Networks VISIFAULT Single Mode &amp; Multimode Visual Fault Locator</h3>
<ul>
<li>Cable Type	Single Mode &amp; Multimode</li>
<li>Equipment Type	Visual Fault Locator</li>
<li>Connector Type	Single Port</li>
<li>Wavelengths	650nm</li>
<li>Operation Test Distance	3 km, 4 km</li>
<li>Battery Type	AA</li>
<li>Battery Life	80 h</li>
<li>Power Source	Battery</li>
<li>Includes	Visual Fault Locator</li>
<li>Dimensions	157 x 52 x 37mm</li>
<li>Minimum Operating Temperature	0°C</li>
<li>Maximum Operating Temperature	+40°C</li>
<li>Height	157mm</li>
<li>Model Number p	VISIFAULT</li>
<li>Weight	180g</li>
<li>Width	37mm</li>
<li>Length	52mm</li>
</ul>
&nbsp;Fix faults fast in your complex optical network applications with this fibre tester from FLUKE. Its bright red visible laser helps you carry out end-to-end continuity, polarity and location tracing checks quickly. This means it makes light work of diagnosing issues such as tight bends, breaks and bad connections in cables, connectors or patch cords. As it comes in an energy-absorbing holster over an impact-resistant housing, you can count on it being durable enough to withstand industrial hazards including bumps or drops.
Features &amp; Benefits
• Choose between continuous and flashing modes for identifying faults across various applications 
• Universal 2.5 mm adapter gives you easy links to SC, ST, FC and FJ connectors 
• Heavy-duty tethered end cap protects the fibre adapter when not in use 
• 3 to 4km range assures you it can handle testing over long distances 
• Generous 80hr battery life makes it practical to take into the field
Applications
• Telecommunications networks 
• Data storage facilities 
• Broadcasting 
• Medical equipment 
&nbsp;

VisiFault Visual Fault Locator Data Sheet

VisiFault Visual Fault Locator Instruction Sheet

Extended Catalogue [EN]

fluke networks visifault single mode multimode visual fault locator pencari kesalahan tunggal network testers rangkaian mod multimod networks/福禄克网络 单模和多模可视故障定位仪 福禄克网络

fluke-networks-visifault-single-mode-multimode-visual-fault-locator

Cornet Electrosmog Meter
Tri-mode RF/LF Electrosmog Field Strength Power Meter
~~~ Model No. ED-88TPlus ~~~
with build-in Gauss Meter function, Electric Field meter, Frequency display
and Data Logging/recording/USB interface to PC

Manufactured in the USA by CORNET Microsystem Inc

Advanced communication and Network solutions
Affordable, Pocket Size, Handheld, High performance EMF/RF/LF Meter !

Unique, handy tool for your personal Electromagnetic wave exposure detection and level measurement. Highly sensitive and Accurate indicators for your defense on RF and LF radiation pollutions.

Electromagnetic Radiation (EMF) is always around our environment.
You can measure the amount of EMF around your home, office, children's school, etc!

The Cornet ED88TPlus is designed for a quick measurement of high frequency Radio Frequency power density and low frequency Electric and Magnetic Fields. The ED88TPlus is a broadband measuring instrument with a frequency range from 100 MHz to 8 GHz. In addition, it also measures low frequency Magnetic Fields ranging from 50Hz to 10kHz and low frequency Electric Fields ranging from 50 Hz to 50 kHz. This meter will give a home or business owner a basic understanding of RF and EMF exposure in their environment and help to identify the primary sources of electro-pollution in an environment. Note: If you are comparing your measurements to the Institute for Building Biology Guidelines and wish to achieve levels in the no concern range, a more sensitive meter is required. Please see our RF Meter or EMF Meter page or consult with one of our technical experts.

High frequency RF Electromagnetic wave field strength and power density measurement

Low frequency LF Magnetic field measurement (Gauss meter function)

Low frequency ELF Electric field measurement (E-field meter function)

Mobile phone base station antenna radiation power density measurement

Wireless communications, Analog & Digital RF (AM/FM, TDMA, GSM, DECT, CDMA,3G,4G)

Wireless LAN (Wi-Fi), Bluetooth, Ultra-wide-band detection, installation, optimization

Spy camera, wireless bug finder 5.8GHz wireless, Utilities AC smart meter

Cellular/Cordless phone radiation safety level

AC power line, High voltage tower, power Transformer, motors and small appliance EMF

Personal living environment EMF safety evaluation

Three operation mode: RF power meter mode, LF Gauss meter mode and LF Electric field mode

Sensor type: Electric field sensor and Magnetic field sensor

RF: 100MHz to 8GHz (-60dBm to 5dBm), (0.5uw/m2 to 1.8w/m2), (14mv/m to 26.2v/m)

LF1: 50Hz to 10KHz (0.1uT to 60uT), (1mG to 600 mG)

LF2: 50Hz to 1KHz (0.01uT to 1uT), (0.1mG to 10mG)

E-field/ELF: 50Hz to 50KHz (10v/m to 1000v/m)

Frequency display: for RF mode only, 100MHz - 2.7GHz, -35dBm minimum signal input required

RF Peak power measurement: 0.5uW/m2 to 1.8W/m2

Display type: digital LCD graphic display

Unit of measurements: dBm, mw/m2, v/m, uT, mG, MHz

LCD back light: 15 seconds auto-off and manual on/off control

Display of data: LCD 4 and 5 digit, 8 LED colour segment, Moving Histogram (level/time) of previous 30 recorded data, Analog segment bar

Data update rate: Sampling rate: 10,000/sec, Display update rate: 2/sec

Error rate: RF: +/- 3.5dBm, LF: 20%, E-field: 25%

Functions: Hold, Max, Average, Sound signature, Alarm, Frequency

Sound & Alarm: Sound on/off/volume control, programable Alarm triggering level

Safety standard indication: 3 safety range indication by 3 Red LED, adjustable LED level

Small, compact handheld design, 69mmx130mm

Battery used: 9V alkaline battery or external power supply through USB port (5V)

<h1 class="md-block-header-one">Cornet Electrosmog Meter Tri-mode RF/LF Electrosmog Field Strength Power Meter ~~~ Model No. ED-88TPlus ~~~ with build-in Gauss Meter function, Electric Field meter, Frequency display and Data Logging/recording/USB interface to PC</h1>Manufactured in the USA by CORNET Microsystem IncAdvanced communication and Network solutions Affordable, Pocket Size, Handheld, High performance EMF/RF/LF Meter !Unique, handy tool for your personal Electromagnetic wave exposure detection and level measurement. Highly sensitive and Accurate indicators for your defense on RF and LF radiation pollutions.Electromagnetic Radiation (EMF) is always around our environment. You can measure the amount of EMF around your home, office, children&#x27;s school, etc!The Cornet ED88TPlus is designed for a quick measurement of high frequency Radio Frequency power density and low frequency Electric and Magnetic Fields. The ED88TPlus is a broadband measuring instrument with a frequency range from 100 MHz to 8 GHz. In addition, it also measures low frequency Magnetic Fields ranging from 50Hz to 10kHz and low frequency Electric Fields ranging from 50 Hz to 50 kHz. This meter will give a home or business owner a basic understanding of RF and EMF exposure in their environment and help to identify the primary sources of electro-pollution in an environment. Note: If you are comparing your measurements to the Institute for Building Biology Guidelines and wish to achieve levels in the no concern range, a more sensitive meter is required. Please see our RF Meter or EMF Meter page or consult with one of our technical experts.Applications:<ul class="md-block-unordered-list-item"><li>High frequency RF Electromagnetic wave field strength and power density measurement</li><li>Low frequency LF Magnetic field measurement (Gauss meter function)</li><li>Low frequency ELF Electric field measurement (E-field meter function)</li><li>Mobile phone base station antenna radiation power density measurement</li><li>Wireless communications, Analog &amp; Digital RF (AM/FM, TDMA, GSM, DECT, CDMA,3G,4G)</li><li>RF power measurement for transmitters</li><li>Wireless LAN (Wi-Fi), Bluetooth, Ultra-wide-band detection, installation, optimization</li><li>Spy camera, wireless bug finder 5.8GHz wireless, Utilities AC smart meter</li><li>Cellular/Cordless phone radiation safety level</li><li>AC power line, High voltage tower, power Transformer, motors and small appliance EMF</li><li>Microwave oven leakage detection</li><li>Personal living environment EMF safety evaluation</li><li>Data Logging</li></ul>Features:<ul class="md-block-unordered-list-item"><li>Three operation mode: RF power meter mode, LF Gauss meter mode and LF Electric field mode</li><li>Sensor type: Electric field sensor and Magnetic field sensor</li><li>Frequency range &amp; Sensitivity:</li><ul class="md-block-unordered-list-item"><li>RF: 100MHz to 8GHz (-60dBm to 5dBm), (0.5uw/m2 to 1.8w/m2), (14mv/m to 26.2v/m)</li><li>LF1: 50Hz to 10KHz (0.1uT to 60uT), (1mG to 600 mG)</li><li>LF2: 50Hz to 1KHz (0.01uT to 1uT), (0.1mG to 10mG)</li><li>E-field/ELF: 50Hz to 50KHz (10v/m to 1000v/m)</li><li>Frequency display: for RF mode only, 100MHz - 2.7GHz, -35dBm minimum signal input required</li></ul><li>RF Peak power measurement: 0.5uW/m2 to 1.8W/m2</li><li>Display type: digital LCD graphic display</li><li>Unit of measurements: dBm, mw/m2, v/m, uT, mG, MHz</li><li>LCD back light: 15 seconds auto-off and manual on/off control</li><li>Display of data: LCD 4 and 5 digit, 8 LED colour segment, Moving Histogram (level/time) of previous 30 recorded data, Analog segment bar</li><li>Data update rate: Sampling rate: 10,000/sec, Display update rate: 2/sec</li><li>Error rate: RF: +/- 3.5dBm, LF: 20%, E-field: 25%</li><li>Functions: Hold, Max, Average, Sound signature, Alarm, Frequency</li><li>Sound &amp; Alarm: Sound on/off/volume control, programable Alarm triggering level</li><li>Safety standard indication: 3 safety range indication by 3 Red LED, adjustable LED level</li><li>Small, compact handheld design, 69mmx130mm</li><li>Battery used: 9V alkaline battery or external power supply through USB port (5V)</li><li>Battery life: &gt;20 hours</li></ul>

<h1>Cornet Electrosmog Meter 
Tri-mode RF/LF Electrosmog Field Strength Power Meter 
~~~ Model No. ED-88TPlus ~~~ 
with build-in Gauss Meter function, Electric Field meter, Frequency display 
and Data Logging/recording/USB interface to PC</h1>
Manufactured in the USA by CORNET Microsystem Inc
Advanced communication and Network solutions 
Affordable, Pocket Size, Handheld, High performance EMF/RF/LF Meter !
Unique, handy tool for your personal Electromagnetic wave exposure detection and level measurement. Highly sensitive and Accurate indicators for your defense on RF and LF radiation pollutions.
Electromagnetic Radiation (EMF) is always around our environment. 
You can measure the amount of EMF around your home, office, children's school, etc!
The Cornet ED88TPlus is designed for a quick measurement of high frequency Radio Frequency power density and low frequency Electric and Magnetic Fields. The ED88TPlus is a broadband measuring instrument with a frequency range from 100 MHz to 8 GHz. In addition, it also measures low frequency Magnetic Fields ranging from 50Hz to 10kHz and low frequency Electric Fields ranging from 50 Hz to 50 kHz. This meter will give a home or business owner a basic understanding of RF and EMF exposure in their environment and help to identify the primary sources of electro-pollution in an environment. Note: If you are comparing your measurements to the Institute for Building Biology Guidelines and wish to achieve levels in the no concern range, a more sensitive meter is required. Please see our RF Meter or EMF Meter page or consult with one of our technical experts.
Applications:
<ul>
<li>High frequency RF Electromagnetic wave field strength and power density measurement</li>
<li>Low frequency LF Magnetic field measurement (Gauss meter function)</li>
<li>Low frequency ELF Electric field measurement (E-field meter function)</li>
<li>Mobile phone base station antenna radiation power density measurement</li>
<li>Wireless communications, Analog &amp; Digital RF (AM/FM, TDMA, GSM, DECT, CDMA,3G,4G)</li>
<li>RF power measurement for transmitters</li>
<li>Wireless LAN (Wi-Fi), Bluetooth, Ultra-wide-band detection, installation, optimization</li>
<li>Spy camera, wireless bug finder 5.8GHz wireless, Utilities AC smart meter</li>
<li>Cellular/Cordless phone radiation safety level</li>
<li>AC power line, High voltage tower, power Transformer, motors and small appliance EMF</li>
<li>Microwave oven leakage detection</li>
<li>Personal living environment EMF safety evaluation</li>
<li>Data Logging</li>
</ul>
Features:
<ul>
<li>Three operation mode: RF power meter mode, LF Gauss meter mode and LF Electric field mode</li>
<li>Sensor type: Electric field sensor and Magnetic field sensor</li>
<li>Frequency range &amp; Sensitivity:</li>
<ul>
<li>RF: 100MHz to 8GHz (-60dBm to 5dBm), (0.5uw/m2 to 1.8w/m2), (14mv/m to 26.2v/m)</li>
<li>LF1: 50Hz to 10KHz (0.1uT to 60uT), (1mG to 600 mG)</li>
<li>LF2: 50Hz to 1KHz (0.01uT to 1uT), (0.1mG to 10mG)</li>
<li>E-field/ELF: 50Hz to 50KHz (10v/m to 1000v/m)</li>
<li>Frequency display: for RF mode only, 100MHz - 2.7GHz, -35dBm minimum signal input required</li>
</ul>
<li>RF Peak power measurement: 0.5uW/m2 to 1.8W/m2</li>
<li>Display type: digital LCD graphic display</li>
<li>Unit of measurements: dBm, mw/m2, v/m, uT, mG, MHz</li>
<li>LCD back light: 15 seconds auto-off and manual on/off control</li>
<li>Display of data: LCD 4 and 5 digit, 8 LED colour segment, Moving Histogram (level/time) of previous 30 recorded data, Analog segment bar</li>
<li>Data update rate: Sampling rate: 10,000/sec, Display update rate: 2/sec</li>
<li>Error rate: RF: +/- 3.5dBm, LF: 20%, E-field: 25%</li>
<li>Functions: Hold, Max, Average, Sound signature, Alarm, Frequency</li>
<li>Sound &amp; Alarm: Sound on/off/volume control, programable Alarm triggering level</li>
<li>Safety standard indication: 3 safety range indication by 3 Red LED, adjustable LED level</li>
<li>Small, compact handheld design, 69mmx130mm</li>
<li>Battery used: 9V alkaline battery or external power supply through USB port (5V)</li>
<li>Battery life: &gt;20 hours</li>
</ul>

YK Yeo

Cornet ED88TPlus Electrosmog Emf Rf/lf/elf (tri-mode) Field Strength Power Gauss Meter Datalogger

cornet ed88tplus electrosmog emf rf/lf/elf (tri-mode) field strength power gauss meter datalogger rf lf elf kekuatan medan pengukur frequency meters frekuensi oem oem/oem代工 elf（三模）场强功率高斯计数据记录仪 emf和频率计 oem代工

cornet-ed88tplus-electrosmog-emf-rf-lf-elf-tri-mode-field-strength-power-gauss-meter-datalogger

Cornet Electrosmog Meter
Dual-mode RF/LF Electrosmog Field Strength Power Meter
~~~ Model No. ED-85ExPlus ~~~
with external SMA connector, Frequency display
and Data Logging/recording/USB interface to PC

Advanced communication and Network solutions
Affordable, Pocket Size, Handheld, High performance 
EMF/RF/LF Meter !

The ED-85EXPlus Electrosmog meter is a Dual-mode device for quick measurement of both High frequency (RF) Electromagnetic wave field strength/power density level, and Low frequency (LF) Magnetic field level(Gauss, Tesla) for living environments. It is an excellent device for individual or company with Electromagnetic wave safety concerns. It has RF bandwidth (SMA connector direct input ) of 1MHz to 8GHz with high sensitivity -70dBm,(0.05uw/m² to 1.8w/m²), and LF bandwidth of 50Hz to 10KHz (or 50Hz to 1KHz) with sensitivity of 0.1uT to 60uT(1mG-600mG) or 0.01uT to 1uT(0.1mG to 10mG). Data Logging function is also included.

Wireless communications, Analog & Digital RF (AM/FM, TDMA, GSM, DECT, CDMA, 3G, 4G, 5G)

Spy camera, wireless bug finder, IOT devices

Cellular/Cordless phone radiation safety level, Electrical Utilities SMART METER radiation level

AC power line, power Transformer, motors and small appliance EMF

Two operation mode: RF power meter mode and LF Gauss meter mode

RF: 1MHz to 8GHz (SMA connector direct input)
(-65dBm to +5dBm),(0.18uw/m2 to 1.8w/m2), (0.008v/m to 26.2v/m), -- (calibrated)
-70dBm (0.05uw/m2 )(0.004v/m) -- (uncalibrated)
*RF frequency range for field strength measurement is depend on the external antenna used. 

Frequency display: 100MHz–2.7GHz for field strength measurement, (from internal build-in antenna only, not from SMA connector direct input); -35dBm minimum signal level required.

RF Peak power measurement: 0.05uw/m² to 1.8w/m² (with external antenna for RF field strength ); 0.004V/m to 26.2V/m (with external antenna for RF field strength )

Data Logging: 1000 data storage point memory for logging/recording measured RF signal level

Battery life: >20 hours (battery & USB cable is not included in shipment)

Internal antenna: internal build-in antenna for Frequency display use only

External antenna: External whip antenna is included. Optional Log periodic antenna available (not included)

<h1 class="md-block-header-one">Cornet Electrosmog Meter Dual-mode RF/LF Electrosmog Field Strength Power Meter ~~~ Model No. ED-85ExPlus ~~~ with external SMA connector, Frequency display and Data Logging/recording/USB interface to PC</h1>Manufactured in the USA by CORNET Microsystem IncAdvanced communication and Network solutions Affordable, Pocket Size, Handheld, High performance EMF/RF/LF Meter !Unique, handy tool for your personal Electromagnetic wave exposure detection and level measurement. Highly sensitive and Accurate indicators for your defense on RF and LF radiation pollutions.Electromagnetic Radiation (EMF) is always around our environment. You can measure the amount of EMF around your home, office, children&#x27;s school, etc!The ED-85EXPlus Electrosmog meter is a Dual-mode device for quick measurement of both High frequency (RF) Electromagnetic wave field strength/power density level, and Low frequency (LF) Magnetic field level(Gauss, Tesla) for living environments. It is an excellent device for individual or company with Electromagnetic wave safety concerns. It has RF bandwidth (SMA connector direct input ) of 1MHz to 8GHz with high sensitivity -70dBm,(0.05uw/m² to 1.8w/m²), and LF bandwidth of 50Hz to 10KHz (or 50Hz to 1KHz) with sensitivity of 0.1uT to 60uT(1mG-600mG) or 0.01uT to 1uT(0.1mG to 10mG). Data Logging function is also included.Applications:<ul class="md-block-unordered-list-item"><li>High frequency RF Electromagnetic wave field strength and power density measurement</li><li>Low frequency LF Magnetic field measurement (Gauss meter function)</li><li>Mobile phone base station antenna radiation power density measurement</li><li>Wireless communications, Analog &amp; Digital RF (AM/FM, TDMA, GSM, DECT, CDMA, 3G, 4G, 5G)</li><li>RF power measurement for transmitters</li><li>Wireless LAN (Wi-Fi), Bluetooth, Ultra-wide-band detection, installation, optimization</li><li>Spy camera, wireless bug finder, IOT devices</li><li>Cellular/Cordless phone radiation safety level, Electrical Utilities SMART METER radiation level</li><li>AC power line, power Transformer, motors and small appliance EMF</li><li>Microwave oven leakage detection</li><li>Personal living environment EMF safety evaluation</li></ul>Features:<ul class="md-block-unordered-list-item"><li>Two operation mode: RF power meter mode and LF Gauss meter mode</li><li>Sensor type: Electric field sensor and Magnetic field sensor</li><li>Frequency range &amp; Sensitivity:</li><ul class="md-block-unordered-list-item"><li>RF: 1MHz to 8GHz (SMA connector direct input) (-65dBm to +5dBm),(0.18uw/m2 to 1.8w/m2), (0.008v/m to 26.2v/m), -- (calibrated) -70dBm (0.05uw/m2 )(0.004v/m) -- (uncalibrated) *RF frequency range for field strength measurement is depend on the external antenna used. </li><li>LF1: 50Hz to 10KHz (0.1uT to 60uT), (1mG to 600 mG)</li><li>LF2: 50Hz to 1KHz (0.01uT to 1uT), (0.1mG to 10mG)</li></ul><li>Frequency display: 100MHz–2.7GHz for field strength measurement, (from internal build-in antenna only, not from SMA connector direct input); -35dBm minimum signal level required.</li><li>Input Impedance: 50 Ohms</li><li>Connector type: SMA female</li><li>RF Peak power measurement: 0.05uw/m² to 1.8w/m² (with external antenna for RF field strength ); 0.004V/m to 26.2V/m (with external antenna for RF field strength )</li><li>Display type: digital LCD graphic display</li><li>Unit of measurements: dBm, mw/m2, v/m, uT, mG, MHz</li><li>LCD back light: 15 seconds auto-off and manual on/off control</li><li>Display of data: LCD 4 and 5 digit, 8 LED colour segment, Moving Histogram (level/time) of previous 30 recorded data, Analog segment bar</li><li>Data update rate: Sampling rate: 10,000/sec, Display update rate: 2/sec</li><li>Error rate: RF: +/- 1.5dBm, LF: 20%</li><li>Functions: Hold, Max, Average, Sound signature, Alarm, Frequency</li><li>Sound &amp; Alarm: Sound on/off/volume control, programable Alarm triggering level</li><li>Safety standard indication: 3 safety range indication by 3 Red LED, adjustable LED level</li><li>Data Logging: 1000 data storage point memory for logging/recording measured RF signal level</li><li>Small, compact handheld design, 69mmx130mm</li><li>Battery used: 9V alkaline battery or external power supply through USB port (5V)</li><li>Battery life: &gt;20 hours (battery &amp; USB cable is not included in shipment)</li><li>Internal antenna: internal build-in antenna for Frequency display use only</li><li>External antenna: External whip antenna is included. Optional Log periodic antenna available (not included)</li></ul>

<h1>Cornet Electrosmog Meter 
Dual-mode RF/LF Electrosmog Field Strength Power Meter 
~~~ Model No. ED-85ExPlus ~~~ 
with external SMA connector, Frequency display 
and Data Logging/recording/USB interface to PC</h1>
Manufactured in the USA by CORNET Microsystem Inc
Advanced communication and Network solutions 
Affordable, Pocket Size, Handheld, High performance 
EMF/RF/LF Meter !
Unique, handy tool for your personal Electromagnetic wave exposure detection and level measurement. Highly sensitive and Accurate indicators for your defense on RF and LF radiation pollutions.
Electromagnetic Radiation (EMF) is always around our environment. 
You can measure the amount of EMF around your home, office, children's school, etc!
The ED-85EXPlus Electrosmog meter is a Dual-mode device for quick measurement of both High frequency (RF) Electromagnetic wave field strength/power density level, and Low frequency (LF) Magnetic field level(Gauss, Tesla) for living environments. It is an excellent device for individual or company with Electromagnetic wave safety concerns. It has RF bandwidth (SMA connector direct input ) of 1MHz to 8GHz with high sensitivity -70dBm,(0.05uw/m² to 1.8w/m²), and LF bandwidth of 50Hz to 10KHz (or 50Hz to 1KHz) with sensitivity of 0.1uT to 60uT(1mG-600mG) or 0.01uT to 1uT(0.1mG to 10mG). Data Logging function is also included.
Applications:
<ul>
<li>High frequency RF Electromagnetic wave field strength and power density measurement</li>
<li>Low frequency LF Magnetic field measurement (Gauss meter function)</li>
<li>Mobile phone base station antenna radiation power density measurement</li>
<li>Wireless communications, Analog &amp; Digital RF (AM/FM, TDMA, GSM, DECT, CDMA, 3G, 4G, 5G)</li>
<li>RF power measurement for transmitters</li>
<li>Wireless LAN (Wi-Fi), Bluetooth, Ultra-wide-band detection, installation, optimization</li>
<li>Spy camera, wireless bug finder, IOT devices</li>
<li>Cellular/Cordless phone radiation safety level, Electrical Utilities SMART METER radiation level</li>
<li>AC power line, power Transformer, motors and small appliance EMF</li>
<li>Microwave oven leakage detection</li>
<li>Personal living environment EMF safety evaluation</li>
</ul>
Features:
<ul>
<li>Two operation mode: RF power meter mode and LF Gauss meter mode</li>
<li>Sensor type: Electric field sensor and Magnetic field sensor</li>
<li>Frequency range &amp; Sensitivity:</li>
<ul>
<li>RF: 1MHz to 8GHz (SMA connector direct input) 
(-65dBm to +5dBm),(0.18uw/m2 to 1.8w/m2), (0.008v/m to 26.2v/m), -- (calibrated) 
-70dBm (0.05uw/m2 )(0.004v/m) -- (uncalibrated) 
*RF frequency range for field strength measurement is depend on the external antenna used.&nbsp;</li>
<li>LF1: 50Hz to 10KHz (0.1uT to 60uT), (1mG to 600 mG)</li>
<li>LF2: 50Hz to 1KHz (0.01uT to 1uT), (0.1mG to 10mG)</li>
</ul>
<li>Frequency display: 100MHz–2.7GHz for field strength measurement, (from internal build-in antenna only, not from SMA connector direct input); -35dBm minimum signal level required.</li>
<li>Input Impedance: 50 Ohms</li>
<li>Connector type: SMA female</li>
<li>RF Peak power measurement: 0.05uw/m² to 1.8w/m² (with external antenna for RF field strength ); 0.004V/m to 26.2V/m (with external antenna for RF field strength )</li>
<li>Display type: digital LCD graphic display</li>
<li>Unit of measurements: dBm, mw/m2, v/m, uT, mG, MHz</li>
<li>LCD back light: 15 seconds auto-off and manual on/off control</li>
<li>Display of data: LCD 4 and 5 digit, 8 LED colour segment, Moving Histogram (level/time) of previous 30 recorded data, Analog segment bar</li>
<li>Data update rate: Sampling rate: 10,000/sec, Display update rate: 2/sec</li>
<li>Error rate: RF: +/- 1.5dBm, LF: 20%</li>
<li>Functions: Hold, Max, Average, Sound signature, Alarm, Frequency</li>
<li>Sound &amp; Alarm: Sound on/off/volume control, programable Alarm triggering level</li>
<li>Safety standard indication: 3 safety range indication by 3 Red LED, adjustable LED level</li>
<li>Data Logging: 1000 data storage point memory for logging/recording measured RF signal level</li>
<li>Small, compact handheld design, 69mmx130mm</li>
<li>Battery used: 9V alkaline battery or external power supply through USB port (5V)</li>
<li>Battery life: &gt;20 hours (battery &amp; USB cable is not included in shipment)</li>
<li>Internal antenna: internal build-in antenna for Frequency display use only</li>
<li>External antenna: External whip antenna is included. Optional Log periodic antenna available (not included)</li>
</ul>

Cornet ED85EXPlus Electrosmog Emf Rf/lf (dual-mode) Gauss Meter With Sma Connector & Data Logger

cornet ed85explus electrosmog emf rf/lf (dual-mode) gauss meter sma connector data logger rf lf (mode ganda) dengan konektor frequency meters pengukur frekuensi oem penyambung oem/oem代工 带sma连接器和数据记录器的cornet lf（双模）高斯计 emf和频率计 oem代工

cornet-ed85explus-electrosmog-emf-rf-lf-dual-mode-gauss-meter-with-sma-connector-data-logger

The new PACE pneumatic modular pressure controller brings together the latest control and measurement technology from Druck to offer an elegant, fast, flexible and economical solution to pressure control for automated production, test and calibration.

PACE employs fully digital control to provide high control stability and high slew rate and market leading speed to setpoint whilst its digitally characterized pressure sensor offers the quality, stability, higher bandwidth and precision associated with this latest generation of piezo-resistive and TERPS devices.

Selection of Chassis and interchangeable control modules

Single, dual or auto range control module configurations

High speed pressure control - 5 seconds to fill 300CC *

Up to 210 bar 3000 psi/21 MPa gauge and absolute

Precision to 0.001% FS over calibrated temperature range

Accuracy 2, 3.5bar a 0.0016% rdg + 0.0033% FS 8-71bar a 0.0011% rdg + 0.0026% FS

Long-term stability from 0.0025% FS per annum

Utilises Druck’s new unique range of piezo-resistive and TERPS pressure sensor technology

28 selectable pressure units and 4 user defined units

Switch Test, Leak Test, Test Program, Burst Test, Analogue output and Volt Free Contact options

Negative gauge calibration included as standard

High resolution colour touch screen operation

Intuitive icon task driven menu structure

RS232, IEEE connectivity, Ethernet and USB as standard

With two PACE CM control modules fitted the PACE6000 can be used in single, auto-ranging or simultaneous dual pressure control mode*

Aeronautical option enabling full control in aeronautical units

PACE CM – high speed pressure control module

Interchangeable robust control module that is easily installed into a PACE chassis

Calibration data stored in the control module (only the CM needs to be sent away for re-calibration)

Choice of standard, high, premium precision or reference accuracy pressure measurement

Barometric reference available to enable pseudo gauge/absolute indication & control

The new PACE pneumatic modular pressure controller brings together the latest control and measurement technology from Druck to offer an elegant, fast, flexible and economical solution to pressure control for automated production, test and calibration.PACE employs fully digital control to provide high control stability and high slew rate and market leading speed to setpoint whilst its digitally characterized pressure sensor offers the quality, stability, higher bandwidth and precision associated with this latest generation of piezo-resistive and TERPS devices.Features<ul class="md-block-unordered-list-item"><li>Selection of Chassis and interchangeable control modules</li><li>Single, dual or auto range control module configurations</li><li>High speed pressure control - 5 seconds to fill 300CC *</li><li>Up to 210 bar 3000 psi/21 MPa gauge and absolute</li><li>Precision to 0.001% FS over calibrated temperature range</li><li>Accuracy 2, 3.5bar a 0.0016% rdg + 0.0033% FS 8-71bar a 0.0011% rdg + 0.0026% FS</li><li>Long-term stability from 0.0025% FS per annum</li><li>Barometric reference option</li><li>Utilises Druck’s new unique range of piezo-resistive and TERPS pressure sensor technology</li><li>28 selectable pressure units and 4 user defined units</li><li>Switch Test, Leak Test, Test Program, Burst Test, Analogue output and Volt Free Contact options</li><li>Aeronautical option</li><li>Negative gauge calibration included as standard</li><li>High resolution colour touch screen operation</li><li>Intuitive icon task driven menu structure</li><li>Compatible with software packages</li><li>RS232, IEEE connectivity, Ethernet and USB as standard</li></ul> PACE6000 chassis<ul class="md-block-unordered-list-item"><li>Dual channel pressure controller chassis</li><li>With two PACE CM control modules fitted the PACE6000 can be used in single, auto-ranging or simultaneous dual pressure control mode*</li><li>Aeronautical option enabling full control in aeronautical units</li><li>No module pressure range ratio limit</li></ul> PACE CM – high speed pressure control module<ul class="md-block-unordered-list-item"><li>Interchangeable robust control module that is easily installed into a PACE chassis</li><li>Calibration data stored in the control module (only the CM needs to be sent away for re-calibration)</li><li>High speed pressure control</li><li>Wide choice of pressure ranges</li><li>Choice of standard, high, premium precision or reference accuracy pressure measurement</li><li>Barometric reference available to enable pseudo gauge/absolute indication &amp; control</li><li>Aeronautical version</li><li></li></ul><figure class="md-block-image"><img src="https://storage.googleapis.com/eezee-product-images/IaDWTdnVMCZ0wwHXPP7qoJ.jpg" alt="" /><figcaption class="md-block-image-caption"></figcaption></figure>

The new PACE pneumatic modular pressure controller brings together the latest control and measurement technology from Druck to offer an elegant, fast, flexible and economical solution to pressure control for automated production, test and calibration.
PACE employs fully digital control to provide high control stability and high slew rate and market leading speed to setpoint whilst its digitally characterized pressure sensor offers the quality, stability, higher bandwidth and precision associated with this latest generation of piezo-resistive and TERPS devices.
Features
<ul>
<li>Selection of Chassis and interchangeable control modules</li>
<li>Single, dual or auto range control module configurations</li>
<li>High speed pressure control - 5 seconds to fill 300CC *</li>
<li>Up to 210 bar 3000 psi/21 MPa gauge and absolute</li>
<li>Precision to 0.001% FS over calibrated temperature range</li>
<li>Accuracy 2, 3.5bar a 0.0016% rdg + 0.0033% FS 8-71bar a 0.0011% rdg + 0.0026% FS</li>
<li>Long-term stability from 0.0025% FS per annum</li>
<li>Barometric reference option</li>
<li>Utilises Druck’s new unique range of piezo-resistive and TERPS pressure sensor technology</li>
<li>28 selectable pressure units and 4 user defined units</li>
<li>Switch Test, Leak Test, Test Program, Burst Test, Analogue output and Volt Free Contact options</li>
<li>Aeronautical option</li>
<li>Negative gauge calibration included as standard</li>
<li>High resolution colour touch screen operation</li>
<li>Intuitive icon task driven menu structure</li>
<li>Compatible with software packages</li>
<li>RS232, IEEE connectivity, Ethernet and USB as standard</li>
</ul>

PACE6000 chassis
<ul>
<li>Dual channel pressure controller chassis</li>
<li>With two PACE CM control modules fitted the PACE6000 can be used in single, auto-ranging or simultaneous dual pressure control mode*</li>
<li>Aeronautical option enabling full control in aeronautical units</li>
<li>No module pressure range ratio limit</li>
</ul>

PACE CM – high speed pressure control module
<ul>
<li>Interchangeable robust control module that is easily installed into a PACE chassis</li>
<li>Calibration data stored in the control module (only the CM needs to be sent away for re-calibration)</li>
<li>High speed pressure control</li>
<li>Wide choice of pressure ranges</li>
<li>Choice of standard, high, premium precision or reference accuracy pressure measurement</li>
<li>Barometric reference available to enable pseudo gauge/absolute indication &amp; control</li>
<li>Aeronautical version</li>
<li></li>
</ul>

 <div class="img-ctnr">
 <amp-img 
 on="tap:1d4fg"
 tabindex="0"
 role="button"
 class="contain"
 layout="fill"
 src="https://storage.googleapis.com/eezee-product-images/IaDWTdnVMCZ0wwHXPP7qoJ.jpg"
 ></amp-img>
 </div>
 
 <amp-image-lightbox 
 id="1d4fg" 
 layout="nodisplay"></amp-image-lightbox>

Pace 5000_6000 Modular Pressure Controller

Adelene

Others

Other Measuring Tools

Humidity & Temperature

Hand Pumps

Adelene Teow

Druck Pace6000 Modular Pressure Controller c/w CM3 Module

druck pace6000 modular pressure controller c/w cm3 module pengontrol tekanan dengan modul weight, force gauges pengukur berat, gaya pengawal alat daya druck/德鲁克 pace6000模块化压力控制器c cm3模块 重量，力和压力计 德鲁克

druck-pace6000-modular-pressure-controller-c-w-cm3-module

Technical Data Sheet (113.22KB) EN

MULTICOMP PRO

Analog Devices

MULTICOMP

Multilayer Ceramic Capacitors

Through Hole Resistors

Voltage Regulators

Voltage Supervisors & Monitors

Voltage References

Hook Up Wires

PCB Headers

Element14

Duratool D03118 Wire Gauge, Stainless Steel

duratool d03118 wire gauge, stainless steel pengukur kawat d03118, baja tahan karat drill gauges tolok wayar keluli 线规，不锈钢 杜拉托尔

duratool-d03118-wire-gauge-stainless-steel

Tenmars Formaldehyde Meter
Measures of HCHO, Temperature and Humidity
(Model No.: TM- 802)

TM-802 HCHO meter is used for measuring range to 5.00ppm.

Backlit LCD displays simultaneously formaldehyde (HCHO), temperature, humidity, easy to monitor.

Occupational safety (OSHA) monitoring shows Total Weight Average, TWA (8 hours) and Short Term Exposure Limit, STEL (15 mins).

Use high-precision electrochemical sensors.

Formaldehyde maximum and minimum alarm value setting.

Accuracy: ±5.0%RH (20~80%);±8.0%RH (80%)

Power: LR03 (AAA)1.5V x 6 batteries or DC adaptor 9V/0.5A (9mm)

<h1 class="md-block-header-one">Tenmars Formaldehyde Meter Measures of HCHO, Temperature and Humidity (Model No.: TM- 802)</h1>Quality Product ~ Made in TaiwanTM-802 HCHO meter is used for measuring range to 5.00ppm.Descriptions:<ul class="md-block-unordered-list-item"><li>Backlit LCD displays simultaneously formaldehyde (HCHO), temperature, humidity, easy to monitor.</li><li>Occupational safety (OSHA) monitoring shows Total Weight Average, TWA (8 hours) and Short Term Exposure Limit, STEL (15 mins).</li><li>Use high-precision electrochemical sensors.</li><li>The maximum / minimum / average hold.</li><li>Stores 200 records manually.</li><li>Data hold.</li><li>Formaldehyde maximum and minimum alarm value setting.</li></ul>Specifications:<ul class="md-block-unordered-list-item"><li>HCHO range: 0-3.00mg/m3 / 0.01~5.00 ppm</li><ul class="md-block-unordered-list-item"><li>Resolution: 0.01mg/m3 / 0.01ppm</li><li>Accuracy: 5%</li><li>Response time: 30 seconds</li></ul><li>Temperature range: -20~50°C / -4~122°F</li><ul class="md-block-unordered-list-item"><li>Resolution: 0.1°C/0.1°F</li><li>Accuracy: 1.0°C/1.8°F</li></ul><li>Humidity range: 5%~95% RH</li><ul class="md-block-unordered-list-item"><li>Resolution: 0.1%RH</li><li>Accuracy: ±5.0%RH (20~80%);±8.0%RH (80%)</li></ul><li>Dimension: 191x73x35mm (LxWxH)</li><li>Weight: 250g</li><li>Power: LR03 (AAA)1.5V x 6 batteries or DC adaptor 9V/0.5A (9mm)</li></ul>

<h1>Tenmars Formaldehyde Meter 
Measures of HCHO, Temperature and Humidity 
(Model No.: TM- 802)</h1>
Quality Product ~ Made in Taiwan
TM-802 HCHO meter is used for measuring range to 5.00ppm.
Descriptions:
<ul>
<li>Backlit LCD displays simultaneously formaldehyde (HCHO), temperature, humidity, easy to monitor.</li>
<li>Occupational safety (OSHA) monitoring shows Total Weight Average, TWA (8 hours) and Short Term Exposure Limit, STEL (15 mins).</li>
<li>Use high-precision electrochemical sensors.</li>
<li>The maximum / minimum / average hold.</li>
<li>Stores 200 records manually.</li>
<li>Data hold.</li>
<li>Formaldehyde maximum and minimum alarm value setting.</li>
</ul>
Specifications:
<ul>
<li>HCHO range: 0-3.00mg/m3 / 0.01~5.00 ppm</li>
<ul>
<li>Resolution: 0.01mg/m3 / 0.01ppm</li>
<li>Accuracy: 5%</li>
<li>Response time: 30 seconds</li>
</ul>
<li>Temperature range: -20~50°C / -4~122°F</li>
<ul>
<li>Resolution: 0.1°C/0.1°F</li>
<li>Accuracy: 1.0°C/1.8°F</li>
</ul>
<li>Humidity range: 5%~95% RH</li>
<ul>
<li>Resolution: 0.1%RH</li>
<li>Accuracy: ±5.0%RH (20~80%);±8.0%RH (80%)</li>
</ul>
<li>Dimension: 191x73x35mm (LxWxH)</li>
<li>Weight: 250g</li>
<li>Power: LR03 (AAA)1.5V x 6 batteries or DC adaptor 9V/0.5A (9mm)</li>
</ul>