Digi-Pas

FLUKE

TENMARS

Test & Measurement

test-measurement

EMF & Frequency Meters

emf-frequency-meters

Level Measurement

level-measurement

Oscilloscopes

oscilloscopes

Sound & Vibration Meters

sound-vibration-meters

Trifield ® EMF Meter Model TF2
Manufactured in the USA by AlphaLab, Inc.
Electromagnetic pollution meter
(AC Magnetic, AC Electric, RF/Microwave)

The TriField EMF Meter Model TF2 is an AC gauss meter, AC electric field meter, and radio power density meter in a single unit, that combines all the features needed for fast, accurate measurements of electromagnetic fields (EMF). In addition to standard AC measurement modes, a special frequency weighted mode will properly scale the magnetic and electric measurements to indicate the full magnitude of currents produced by each type of field inside the human body.

Detects all three types of EMF pollution: AC magnetic, AC electric, and RF/microwave

Special frequency weighting mode for measuring electric current from EMF in the human body

AC Magnetic Mode covers 40 Hz – 100 kHz with range of 0.1 – 100.0 milligauss (mG)

AC Electric Mode covers 40 Hz – 100 kHz with range of 1 – 1000 volts per meter (V/m)

RF Mode covers 20 MHz – 6 GHz with range of 0.001 – 19.999 milliwatts per square meter (mW/m2)

AC magnetic measurements are 3-axis, allowing for quick readings, regardless of meter orientation

Large liquid-crystal display (LCD) for crystal clear, accurate readings

Adjustable backlight for use in low-light environments

Audio Indicator emits sound that helps to pinpoint EMF sources

Peak Hold captures fast pulses, for measuring fast digital signals

Operates for more than 20 hours on a 9V battery, with a low battery indicator

Overhead AC power line and transformer EMF emissions

Laptop, refrigerator, circuit breaker box, etc. appliance EMF emission

EMF emission inside aircraft and motor vehicles

EMF from plumbing pipes used as grounding

Battery: 9V alkaline battery with indicator

Dimensions: 38 x 70 x 133mm (1.5 x 2.75 x 5.25 in)

<h1 class="md-block-header-one">Trifield ® EMF Meter Model TF2 Manufactured in the USA by AlphaLab, Inc. Electromagnetic pollution meter (AC Magnetic, AC Electric, RF/Microwave)</h1>The TriField EMF Meter Model TF2 is an AC gauss meter, AC electric field meter, and radio power density meter in a single unit, that combines all the features needed for fast, accurate measurements of electromagnetic fields (EMF). In addition to standard AC measurement modes, a special frequency weighted mode will properly scale the magnetic and electric measurements to indicate the full magnitude of currents produced by each type of field inside the human body.Features:<ul class="md-block-unordered-list-item"><li>Detects all three types of EMF pollution: AC magnetic, AC electric, and RF/microwave</li><li>Special frequency weighting mode for measuring electric current from EMF in the human body</li><li>AC Magnetic Mode covers 40 Hz – 100 kHz with range of 0.1 – 100.0 milligauss (mG)</li><li>AC Electric Mode covers 40 Hz – 100 kHz with range of 1 – 1000 volts per meter (V/m)</li><li>RF Mode covers 20 MHz – 6 GHz with range of 0.001 – 19.999 milliwatts per square meter (mW/m2)</li><li>AC magnetic measurements are 3-axis, allowing for quick readings, regardless of meter orientation</li><li>Large liquid-crystal display (LCD) for crystal clear, accurate readings</li><li>Adjustable backlight for use in low-light environments</li><li>Audio Indicator emits sound that helps to pinpoint EMF sources</li><li>Peak Hold captures fast pulses, for measuring fast digital signals</li><li>Operates for more than 20 hours on a 9V battery, with a low battery indicator</li></ul>Applications:<ul class="md-block-unordered-list-item"><li>Mobile phone and cell tower RF radiation</li><li>Smart meter RF radiation</li><li>Wi-Fi router and Bluetooth RF radiation</li><li>Overhead AC power line and transformer EMF emissions</li><li>Laptop, refrigerator, circuit breaker box, etc. appliance EMF emission</li><li>EMF emission inside aircraft and motor vehicles</li><li>Microwave oven leak</li><li>Location and EMF of wiring in walls</li><li>EMF from plumbing pipes used as grounding</li></ul>Specifications:<ul class="md-block-unordered-list-item"><li>AC Magnetic: 3-axis, true magnitude</li><ul class="md-block-unordered-list-item"><li>Frequency Range: 40 Hz – 100 kHz</li><li>Accuracy: ±4% @ 50/60 Hz</li><li>Maximum Range: 100.0 milligauss</li><li>Sensitivity (Resolution): 0.1 milligauss</li></ul><li>AC Electric: 1-axis, true magnitude</li><ul class="md-block-unordered-list-item"><li>Frequency Range: 40 Hz – 100 kHz</li><li>Accuracy: ±5% @ 50/60 Hz</li><li>Maximum Range: 1000 V/m</li><li>Sensitivity (Resolution): 1 V/m</li></ul><li>RF/Microwave: 1-axis</li><ul class="md-block-unordered-list-item"><li>Frequency Range: 20 MHz – 6 GHz</li><li>Accuracy: ±20% @ 1 GHz</li><li>Maximum Range: 19.999 mW/m2</li><li>Sensitivity (Resolution): 0.001 mW/m2</li></ul><li>Battery: 9V alkaline battery with indicator</li><ul class="md-block-unordered-list-item"><li>Battery Life Backlight Off: &gt; 20 hrs</li><li>Battery Life Backlight On: &gt; 12 hrs</li></ul><li>Weight: 230g (0.51 lbs)</li><li>Dimensions: 38 x 70 x 133mm (1.5 x 2.75 x 5.25 in)</li></ul>

<h1>Trifield ® EMF Meter Model TF2 
Manufactured in the USA by AlphaLab, Inc. 
Electromagnetic pollution meter 
(AC Magnetic, AC Electric, RF/Microwave)</h1>
The TriField EMF Meter Model TF2 is an AC gauss meter, AC electric field meter, and radio power density meter in a single unit, that combines all the features needed for fast, accurate measurements of electromagnetic fields (EMF). In addition to standard AC measurement modes, a special frequency weighted mode will properly scale the magnetic and electric measurements to indicate the full magnitude of currents produced by each type of field inside the human body.
Features:
<ul>
<li>Detects all three types of EMF pollution: AC magnetic, AC electric, and RF/microwave</li>
<li>Special frequency weighting mode for measuring electric current from EMF in the human body</li>
<li>AC Magnetic Mode covers 40 Hz – 100 kHz with range of 0.1 – 100.0 milligauss (mG)</li>
<li>AC Electric Mode covers 40 Hz – 100 kHz with range of 1 – 1000 volts per meter (V/m)</li>
<li>RF Mode covers 20 MHz – 6 GHz with range of 0.001 – 19.999 milliwatts per square meter (mW/m2)</li>
<li>AC magnetic measurements are 3-axis, allowing for quick readings, regardless of meter orientation</li>
<li>Large liquid-crystal display (LCD) for crystal clear, accurate readings</li>
<li>Adjustable backlight for use in low-light environments</li>
<li>Audio Indicator emits sound that helps to pinpoint EMF sources</li>
<li>Peak Hold captures fast pulses, for measuring fast digital signals</li>
<li>Operates for more than 20 hours on a 9V battery, with a low battery indicator</li>
</ul>
Applications:
<ul>
<li>Mobile phone and cell tower RF radiation</li>
<li>Smart meter RF radiation</li>
<li>Wi-Fi router and Bluetooth RF radiation</li>
<li>Overhead AC power line and transformer EMF emissions</li>
<li>Laptop, refrigerator, circuit breaker box, etc. appliance EMF emission</li>
<li>EMF emission inside aircraft and motor vehicles</li>
<li>Microwave oven leak</li>
<li>Location and EMF of wiring in walls</li>
<li>EMF from plumbing pipes used as grounding</li>
</ul>
Specifications:
<ul>
<li>AC Magnetic: 3-axis, true magnitude</li>
<ul>
<li>Frequency Range: 40 Hz – 100 kHz</li>
<li>Accuracy: ±4% @ 50/60 Hz</li>
<li>Maximum Range: 100.0 milligauss</li>
<li>Sensitivity (Resolution): 0.1 milligauss</li>
</ul>
<li>AC Electric: 1-axis, true magnitude</li>
<ul>
<li>Frequency Range: 40 Hz – 100 kHz</li>
<li>Accuracy: ±5% @ 50/60 Hz</li>
<li>Maximum Range: 1000 V/m</li>
<li>Sensitivity (Resolution): 1 V/m</li>
</ul>
<li>RF/Microwave: 1-axis</li>
<ul>
<li>Frequency Range: 20 MHz – 6 GHz</li>
<li>Accuracy: ±20% @ 1 GHz</li>
<li>Maximum Range: 19.999 mW/m2</li>
<li>Sensitivity (Resolution): 0.001 mW/m2</li>
</ul>
<li>Battery: 9V alkaline battery with indicator</li>
<ul>
<li>Battery Life Backlight Off: &gt; 20 hrs</li>
<li>Battery Life Backlight On: &gt; 12 hrs</li>
</ul>
<li>Weight: 230g (0.51 lbs)</li>
<li>Dimensions: 38 x 70 x 133mm (1.5 x 2.75 x 5.25 in)</li>
</ul>

YK Yeo

buyerIntroduction

Trifield TF2 Electromagnetic Meter 3-axis Emf Detector

trifield tf2 electromagnetic meter 3-axis emf detector frequency meters pengukur frekuensi oem pengesan paksi oem/oem代工 tf2电磁计3轴电动势检测器 emf和频率计 oem代工

trifield-tf2-electromagnetic-meter-3-axis-emf-detector

Fluke 810 Vibration Meter Acceleration, 3 Axis

On-board identification and location of most common vibration mechanical faults reducing downtime.

Fault severity scale with four severity levels helps you prioritize maintenance work

Repair recommendations advise technicians on corrective action

On-board context-sensitive help provides real-time tips and guidance to new users

2GB expandable onboard memory provides enough space for your machinery’s data

Self-test function ensures optimal performance and more time on the job

Laser tachometer for an accurate machine running speed promotes confident diagnoses

Tri-axial accelerometer reduces measurement time by 2/3 over single axis accelerometers

Viewer PC Software expands data storage and tracking capacity

Tri-axial accelerometer, magnet mount, mounting pad kit with adhesive, accelerometer quick-disconnect cable

Smart battery pack with cable and adapters

Getting Started Guide, illustrated quick reference guide

FLUKE Vibration Meter, Lithium-Ion Battery, 1% Amplitude Non-Linearity - FLUKE 810

Grab this vibration meter from FLUKE to get on top of shaky performance in your industrial setup. It's an ideal option for investigating bearing failures and misalignment in fans, motors and pumps. The device measures acceleration up to 80g to paint a clear picture of movement in your components. Stainless steel casing shields the assembly from bumps and scuffs you'd expect from persistent use in harsh settings. A carrying case is included for added protection and easy transportation.

• Hermetic sealing means it's air-tight and performs under pressure
• Safe to use in industrial environments, thanks to an operating temperature range of 0°C to +50°C
• Backlit LCD screen for a clear display in dim light
• Rechargeable battery pack with 8-hour life for all-day measuring in the field

• Factory automation
• HVAC systems
• Processing and packaging plants

Is this product compatible with computer software?

Yes, this vibration meter is supplied with Viewer PC software that makes it simple to create reports, import data and examine information in more detail.

What's the benefit of the unit's tri-axial accelerometer?

When compared to single-axis devices, tri-axial accelerometers take readings in two-thirds of the time, so you get speedy results. 

<h3 class="md-block-header-three">Fluke 810 Vibration Meter Acceleration, 3 Axis</h3><ul class="md-block-unordered-list-item"><li> Measurement Parameters	Acceleration</li><li>Number of Axis	3</li><li>Maximum Acceleration	80g</li><li>Communication Protocol	USB</li><li>Maximum Operating Temperature	+50°C</li><li>Minimum Operating Temperature	0°C</li><li>Display Type	LCD</li><li>Battery Type	Rechargeable Lithium-Ion</li><li>Model Number p	810</li></ul>Features and BenefitsOn-board identification and location of most common vibration mechanical faults reducing downtime.Fault severity scale with four severity levels helps you prioritize maintenance workRepair recommendations advise technicians on corrective actionOn-board context-sensitive help provides real-time tips and guidance to new users2GB expandable onboard memory provides enough space for your machinery’s dataSelf-test function ensures optimal performance and more time on the jobLaser tachometer for an accurate machine running speed promotes confident diagnosesTri-axial accelerometer reduces measurement time by 2/3 over single axis accelerometersViewer PC Software expands data storage and tracking capacityWhat&#x27;s Included?Fluke 810 Vibration TesterTri-axial accelerometer, magnet mount, mounting pad kit with adhesive, accelerometer quick-disconnect cableLaser tachometer and storage pouchSmart battery pack with cable and adaptersShoulder strap and adjustable hand strapViewer PC softwareMini USB to USB cableGetting Started Guide, illustrated quick reference guideUsers Manual CD-ROMCarrying caseFLUKE Vibration Meter, Lithium-Ion Battery, 1% Amplitude Non-Linearity - FLUKE 810Grab this vibration meter from FLUKE to get on top of shaky performance in your industrial setup. It&#x27;s an ideal option for investigating bearing failures and misalignment in fans, motors and pumps. The device measures acceleration up to 80g to paint a clear picture of movement in your components. Stainless steel casing shields the assembly from bumps and scuffs you&#x27;d expect from persistent use in harsh settings. A carrying case is included for added protection and easy transportation.Features &amp; Benefits• Hermetic sealing means it&#x27;s air-tight and performs under pressure • Safe to use in industrial environments, thanks to an operating temperature range of 0°C to +50°C • Backlit LCD screen for a clear display in dim light • Rechargeable battery pack with 8-hour life for all-day measuring in the fieldApplications• Factory automation • HVAC systems • Processing and packaging plantsIs this product compatible with computer software?Yes, this vibration meter is supplied with Viewer PC software that makes it simple to create reports, import data and examine information in more detail.What&#x27;s the benefit of the unit&#x27;s tri-axial accelerometer?When compared to single-axis devices, tri-axial accelerometers take readings in two-thirds of the time, so you get speedy results.

<h3>Fluke 810 Vibration Meter Acceleration, 3 Axis</h3>
<ul>
<li>&nbsp;Measurement Parameters	Acceleration</li>
<li>Number of Axis	3</li>
<li>Maximum Acceleration	80g</li>
<li>Communication Protocol	USB</li>
<li>Maximum Operating Temperature	+50°C</li>
<li>Minimum Operating Temperature	0°C</li>
<li>Display Type	LCD</li>
<li>Battery Type	Rechargeable Lithium-Ion</li>
<li>Model Number p	810</li>
</ul>
Features and Benefits
On-board identification and location of most common vibration mechanical faults reducing downtime.
Fault severity scale with four severity levels helps you prioritize maintenance work
Repair recommendations advise technicians on corrective action
On-board context-sensitive help provides real-time tips and guidance to new users
2GB expandable onboard memory provides enough space for your machinery’s data
Self-test function ensures optimal performance and more time on the job
Laser tachometer for an accurate machine running speed promotes confident diagnoses
Tri-axial accelerometer reduces measurement time by 2/3 over single axis accelerometers
Viewer PC Software expands data storage and tracking capacity
What's Included?
Fluke 810 Vibration Tester
Tri-axial accelerometer, magnet mount, mounting pad kit with adhesive, accelerometer quick-disconnect cable
Laser tachometer and storage pouch
Smart battery pack with cable and adapters
Shoulder strap and adjustable hand strap
Viewer PC software
Mini USB to USB cable
Getting Started Guide, illustrated quick reference guide
Users Manual CD-ROM
Carrying case
FLUKE Vibration Meter, Lithium-Ion Battery, 1% Amplitude Non-Linearity - FLUKE 810
Grab this vibration meter from FLUKE to get on top of shaky performance in your industrial setup. It's an ideal option for investigating bearing failures and misalignment in fans, motors and pumps. The device measures acceleration up to 80g to paint a clear picture of movement in your components. Stainless steel casing shields the assembly from bumps and scuffs you'd expect from persistent use in harsh settings. A carrying case is included for added protection and easy transportation.
Features &amp; Benefits
• Hermetic sealing means it's air-tight and performs under pressure 
• Safe to use in industrial environments, thanks to an operating temperature range of 0°C to +50°C 
• Backlit LCD screen for a clear display in dim light 
• Rechargeable battery pack with 8-hour life for all-day measuring in the field
Applications
• Factory automation 
• HVAC systems 
• Processing and packaging plants
Is this product compatible with computer software?
Yes, this vibration meter is supplied with Viewer PC software that makes it simple to create reports, import data and examine information in more detail.
What's the benefit of the unit's tri-axial accelerometer?
When compared to single-axis devices, tri-axial accelerometers take readings in two-thirds of the time, so you get speedy results.&nbsp;

Fluke 810 Vibration Tester Data Sheet

Contains SVHC - 1,3-propanesultone - CAS No. 1120-71-4

Contains SVHC - 1,2-dimethoxyethane; ethylene glycol dimethyl ether (EGDME) - CAS No. 110-71-4

RS Pro

SCHNEIDER ELECTRIC

Fluke Networks

Abus

Screw

O Ring

Surface Mount Resistors

Circular Connectors

Contactors

Bolts

Panel Mount Indicators 

Molded Case Circuit Breakers - MCCBs

Junction & Enclosure Box

Electrical Wire 

RS Components ETH SG

fluke 810 vibration meter acceleration, axis pengukur getaran 810, akselerasi, sumbu sound meters suara pecutan paksi bunyi fluke/福禄克 振动计加速度，3 声音和振动计 福禄克

fluke-810-vibration-meter-acceleration-3-axis

Multi-Field EMF Meter / Gauss Meter
Measures 3 fields Simultaneously
(Model No. TM-190)

Electromagnetic Field ( 3-axis ) ~ Electric Field. ~ RF Strength Field

Language Selection (choose your language): English; Traditional Chinese; Simplified Chinese; Japanese; Spanish.

Sensor type: Low Frequency Magnetic Fields, Triple axis (X, Y, Z)

Resolution: 0.01/0.1/1 mG or 0.01/0.1/1 µT

Resolution: 0.01μW / m², 0.1μA / m, 0.1mV/m,0.001μW/cm ², 1dB

Display: 4 digits, 2.4 inches color TFT LCD.

Operating temperature & humidity: 5°C to 40°C, below 80% RH.

Storage temperature & humidity: -10°C to 60°C, below 70%.

Remarks: TM-190 can be powered via USB mini-B (5 pin) connection, user’s external power supply (voltage DC 4.8 ~ 5.2V; current ≧ 500mA).

<h1 class="md-block-header-one">Multi-Field EMF Meter / Gauss Meter Measures 3 fields Simultaneously (Model No. TM-190)</h1>Electromagnetic Field ( 3-axis ) ~ Electric Field. ~ RF Strength FieldQuality Product ~ Made in TaiwanProduct Description<ul class="md-block-unordered-list-item"><li>4 digits, 2.4 inches color TFT LCD.</li><ul class="md-block-unordered-list-item"><li>3 measurements in one meter:</li><li>Electromagnetic Field ( 3 - axis ).</li><li>Electric Field.</li></ul><li>RF Strength Field.</li><li>Data Hold (HOLD).</li><li>Language Selection (choose your language): English; Traditional Chinese; Simplified Chinese; Japanese; Spanish.</li></ul>Specifications<ul class="md-block-unordered-list-item"><li>Electromagnetic field</li><ul class="md-block-unordered-list-item"><li>Sensor type: Low Frequency Magnetic Fields, Triple axis (X, Y, Z)</li><li>Range: 0.02~2000mG, 0.02 to 200µT</li><li>Resolution: 0.01/0.1/1 mG or 0.01/0.1/1 µT</li><li>Frequency: 50/60 Hz</li><li>Accuracy: ±(15%+100dgt)</li></ul><li>Electric field</li><ul class="md-block-unordered-list-item"><li>Sensor type: LF Electric Fields</li><li>Range: 50V/m to 2000V/m.</li><li>Resolution: 1 V/m</li><li>Frequency: 50/60 Hz</li><li>Accuracy: ± (7%+50dgt)</li></ul><li>RF Strength field</li><ul class="md-block-unordered-list-item"><li>Sensor type: RF Strength</li><li>Range: 0.02µW/m²  ~ 554mW/m²</li><li>Resolution: 0.01μW / m², 0.1μA / m, 0.1mV/m,0.001μW/cm ², 1dB</li><li>Frequency: 50MHz to 3.5GHz</li><li>Accuracy: ± 2dB  at 2.45GHz</li></ul><li>Display: 4 digits, 2.4 inches color TFT LCD.</li><li>Sample rate: 6 seconds per time.</li><li>Battery life: approximate 8 hours.</li><li>Battery: 1.5V AAA alkaline battery*3.</li><li>Audible key tone alarm: buzzer</li><li>Operating temperature &amp; humidity: 5°C to 40°C, below 80% RH.</li><li>Storage temperature &amp; humidity: -10°C to 60°C, below 70%.</li><li>Weight: about 120g.</li><li>Dimensions: 115(L) x 60(W) x 21(H) mm.</li></ul>Remarks: TM-190 can be powered via USB mini-B (5 pin) connection, user’s external power supply (voltage DC 4.8 ~ 5.2V; current ≧ 500mA).

<h1>Multi-Field EMF Meter / Gauss Meter 
Measures 3 fields Simultaneously 
(Model No. TM-190)</h1>
Electromagnetic Field ( 3-axis ) ~ Electric Field. ~ RF Strength Field
Quality Product ~ Made in Taiwan
Product Description
<ul>
<li>4 digits, 2.4 inches color TFT LCD.</li>
<ul>
<li>3 measurements in one meter:</li>
<li>Electromagnetic Field ( 3 - axis ).</li>
<li>Electric Field.</li>
</ul>
<li>RF Strength Field.</li>
<li>Data Hold (HOLD).</li>
<li>Language Selection (choose your language): English; Traditional Chinese; Simplified Chinese; Japanese; Spanish.</li>
</ul>
Specifications
<ul>
<li>Electromagnetic field</li>
<ul>
<li>Sensor type: Low Frequency Magnetic Fields, Triple axis (X, Y, Z)</li>
<li>Range: 0.02~2000mG, 0.02 to 200µT</li>
<li>Resolution: 0.01/0.1/1 mG or 0.01/0.1/1 µT</li>
<li>Frequency: 50/60 Hz</li>
<li>Accuracy: ±(15%+100dgt)</li>
</ul>
<li>Electric field</li>
<ul>
<li>Sensor type: LF Electric Fields</li>
<li>Range: 50V/m to 2000V/m.</li>
<li>Resolution: 1 V/m</li>
<li>Frequency: 50/60 Hz</li>
<li>Accuracy: ± (7%+50dgt)</li>
</ul>
<li>RF Strength field</li>
<ul>
<li>Sensor type: RF Strength</li>
<li>Range: 0.02µW/m²  ~ 554mW/m²</li>
<li>Resolution: 0.01μW / m², 0.1μA / m, 0.1mV/m,0.001μW/cm ², 1dB</li>
<li>Frequency: 50MHz to 3.5GHz</li>
<li>Accuracy: ± 2dB  at 2.45GHz</li>
</ul>
<li>Display: 4 digits, 2.4 inches color TFT LCD.</li>
<li>Sample rate: 6 seconds per time.</li>
<li>Battery life: approximate 8 hours.</li>
<li>Battery: 1.5V AAA alkaline battery*3.</li>
<li>Audible key tone alarm: buzzer</li>
<li>Operating temperature &amp; humidity: 5°C to 40°C, below 80% RH.</li>
<li>Storage temperature &amp; humidity: -10°C to 60°C, below 70%.</li>
<li>Weight: about 120g.</li>
<li>Dimensions: 115(L) x 60(W) x 21(H) mm.</li>
</ul>
Remarks: TM-190 can be powered via USB mini-B (5 pin) connection, user’s external power supply (voltage DC 4.8 ~ 5.2V; current ≧ 500mA).

Tenmars TM-190 Multi-field Emf Meter / Gauss Meter

tenmars tm-190 multi-field emf meter gauss frequency meters pengukur frekuensi pelbagai medan tenmars/天马星 tm-190多场电动势计/高斯计 emf和频率计 天马星

tenmars-tm-190-multi-field-emf-meter-gauss-meter

Digipas Digital Level Cube DWL 90Pro 2 axis  Pocket Size

 is an affordable 2 axis digital angle meter with a small but accurate leveling device. It can be connected by bluetooth to make measurements easy, especially for high and hard to reach places.Features

Pocket-Sized Design fits in tool box or work wear easily

0.05° Resolution gives discrete and accurate reading

Bluetooth-linked App allows you to take angles when the device is overhead, in an obscure location or out of sight.

Variety of Measuring units mm/m / inch / °/ % slope in a single tap of the button

Large Angle Measurement range of 0-360° for x axis and 0-5° for y-axis

Handy size that fits right into your pocket. 

<h3 class="md-block-header-three">Digipas Digital Level Cube DWL 90Pro 2 axis Pocket Size</h3> is an affordable 2 axis digital angle meter with a small but accurate leveling device. It can be connected by bluetooth to make measurements easy, especially for high and hard to reach places.Features<ul class="md-block-unordered-list-item"><li>Pocket-Sized Design fits in tool box or work wear easily</li><li>0.05° Resolution gives discrete and accurate reading</li><li>Bluetooth-linked App allows you to take angles when the device is overhead, in an obscure location or out of sight.</li><li>Variety of Measuring units mm/m / inch / °/ % slope in a single tap of the button</li><li>Large Angle Measurement range of 0-360° for x axis and 0-5° for y-axis</li></ul>Handy size that fits right into your pocket.

<h3>Digipas Digital Level Cube DWL 90Pro 2 axis Pocket Size</h3>
&nbsp;is an affordable 2 axis digital angle meter with a small but accurate leveling device. It can be connected by bluetooth to make measurements easy, especially for high and hard to reach places.Features
<ul>
<li>Pocket-Sized Design fits in tool box or work wear easily</li>
<li>0.05° Resolution gives discrete and accurate reading</li>
<li>Bluetooth-linked App allows you to take angles when the device is overhead, in an obscure location or out of sight.</li>
<li>Variety of Measuring units mm/m / inch / °/ % slope in a single tap of the button</li>
<li>Large Angle Measurement range of 0-360° for x axis and 0-5° for y-axis</li>
</ul>
Handy size that fits right into your pocket.&nbsp;

Kho Zhi Gang

Vogel

Distance Measurement

Other Tools

KHO ZHI GANG

Digipas Digital Level Cube Dwl 90Pro 2 Axis Pocket Size

digipas digital level cube dwl 90pro axis pocket size measurement pengukuran digi-pas pengukur aras 数字水准仪 轴袖珍型

digipas-digital-level-cube-dwl-90pro-2-axis-pocket-size

DC Gaussmeter Model GM1-ST
Manufactured in the USA by AlphaLab, Inc.
For magnets (or DC Solenoids) 0.1 - 20K Gauss

The Gaussmeter Model GM1-ST measures the field of even the strongest static magnet (to 20kG) down to fine resolution (0.1G). Features rapid turn-on and fast update. This model supersedes the MD1-ST, which had no auto-zero.

The Model 1-ST measures strength and polarity of magnetic fields up to 19,999.9 gauss. The sensor can easily fit in a .060 inch (1.5 mm) gap and is at the end of a 100 cm flexible cable. The sensor end can be bent if required for a variety of situations. Place the sensor on a magnet face to measure the field. With a resolution of 0.1 gauss, it can measure any tiny variation from magnet to a magnet or it can detect if a given magnet has lost even a little strength. Bend the sensor into an “L” to measure inside a DC solenoid tube. The 5 ½ digit display requires neither auto nor manual range change, making it easier to use than older style 3 ½ or 4 ½ digit meters. Turn on the meter and immediately begin reading fields (updates 4 times per second). There is no setup required, making this the fastest, easiest gauss meter available.

High dynamic range 5 ½ digit display reads even the strongest magnets with 0.1 gauss resolution, including polarity.

Turns on instantly, updated four times a second, no setup or initial calibration required.

Auto-Zero (subtracts the present field from subsequent readings); also a fine offset control.

Offset range is the full +/- 19,999.99 gauss.

1% accuracy at room temperature, including probe.

With rubber boot and hard carrying case is available.

Measures all permanent magnets. (Maximum field of magnets is about 15,000, which occurs only with rare-earth magnets in a gap configuration.)

High resolution of 0.1 gauss over the entire range of +19,999.9 to -19,999.9 gauss allows detection of any variation in the field from a magnet.

Measures inside DC Solenoids (probe is bent into “L” shape to measure this).

Sufficient resolution to map fields far from magnets.

Range/Resolution: 19,999.9 G/0.1 G; with polarity indicator

Accuracy: +/- 1% of reading (16° to 29°C); +/- 2% (-4° to 65°C)

Offset: Auto-Zero. Also fine offset (0.1 gauss resolution)

Probe (non-detachable): 1.5 (thick) x 4.3 x 24 mm

Meter Size: 5.2 x 3.6 x 1.6 inches; 132 x 91 x 41 mm

Battery: 9 volt alkaline (~ 40 hour life) / "Low Battery" indicator

<h1 class="md-block-header-one">DC Gaussmeter Model GM1-ST Manufactured in the USA by AlphaLab, Inc. For magnets (or DC Solenoids) 0.1 - 20K Gauss</h1>The Gaussmeter Model GM1-ST measures the field of even the strongest static magnet (to 20kG) down to fine resolution (0.1G). Features rapid turn-on and fast update. This model supersedes the MD1-ST, which had no auto-zero.Product Description:The Model 1-ST measures strength and polarity of magnetic fields up to 19,999.9 gauss. The sensor can easily fit in a .060 inch (1.5 mm) gap and is at the end of a 100 cm flexible cable. The sensor end can be bent if required for a variety of situations. Place the sensor on a magnet face to measure the field. With a resolution of 0.1 gauss, it can measure any tiny variation from magnet to a magnet or it can detect if a given magnet has lost even a little strength. Bend the sensor into an “L” to measure inside a DC solenoid tube. The 5 ½ digit display requires neither auto nor manual range change, making it easier to use than older style 3 ½ or 4 ½ digit meters. Turn on the meter and immediately begin reading fields (updates 4 times per second). There is no setup required, making this the fastest, easiest gauss meter available.Available Items:<ul class="md-block-unordered-list-item"><li>Detachable Rubber Boot (include)</li><li>Hard Carrying Case (include) </li><li>NIST Traceable Certificate (include)</li></ul>Features:<ul class="md-block-unordered-list-item"><li>High dynamic range 5 ½ digit display reads even the strongest magnets with 0.1 gauss resolution, including polarity.</li><li>Turns on instantly, updated four times a second, no setup or initial calibration required.</li><li>Auto-Zero (subtracts the present field from subsequent readings); also a fine offset control.</li><li>Offset range is the full +/- 19,999.99 gauss.</li><li>1% accuracy at room temperature, including probe.</li><li>Probe and battery included.</li><li>With rubber boot and hard carrying case is available.</li><li>CE Compliant.</li></ul>Applications:<ul class="md-block-unordered-list-item"><li>Measures all permanent magnets. (Maximum field of magnets is about 15,000, which occurs only with rare-earth magnets in a gap configuration.)</li><li>High resolution of 0.1 gauss over the entire range of +19,999.9 to -19,999.9 gauss allows detection of any variation in the field from a magnet.</li><li>Measures inside DC Solenoids (probe is bent into “L” shape to measure this).</li><li>Sufficient resolution to map fields far from magnets.</li></ul>Specifications:1-axis DC Gaussmeter GM1-ST<ul class="md-block-unordered-list-item"><li>Range/Resolution: 19,999.9 G/0.1 G; with polarity indicator</li><li>Accuracy: +/- 1% of reading (16° to 29°C); +/- 2% (-4° to 65°C)</li><li>Offset: Auto-Zero. Also fine offset (0.1 gauss resolution)</li><li>Probe (non-detachable): 1.5 (thick) x 4.3 x 24 mm</li><li>Meter Size: 5.2 x 3.6 x 1.6 inches; 132 x 91 x 41 mm</li><li>Weight: 8 oz</li><li>Battery: 9 volt alkaline (~ 40 hour life) / &quot;Low Battery&quot; indicator</li></ul>

<h1>DC Gaussmeter Model GM1-ST 
Manufactured in the USA by AlphaLab, Inc. 
For magnets (or DC Solenoids) 0.1 - 20K Gauss</h1>
The Gaussmeter Model GM1-ST measures the field of even the strongest static magnet (to 20kG) down to fine resolution (0.1G). Features rapid turn-on and fast update. This model supersedes the MD1-ST, which had no auto-zero.
Product Description:
The Model 1-ST measures strength and polarity of magnetic fields up to 19,999.9 gauss. The sensor can easily fit in a .060 inch (1.5 mm) gap and is at the end of a 100 cm flexible cable. The sensor end can be bent if required for a variety of situations. Place the sensor on a magnet face to measure the field. With a resolution of 0.1 gauss, it can measure any tiny variation from magnet to a magnet or it can detect if a given magnet has lost even a little strength. Bend the sensor into an “L” to measure inside a DC solenoid tube. The 5 ½ digit display requires neither auto nor manual range change, making it easier to use than older style 3 ½ or 4 ½ digit meters. Turn on the meter and immediately begin reading fields (updates 4 times per second). There is no setup required, making this the fastest, easiest gauss meter available.
Available Items:
<ul>
<li>Detachable Rubber Boot (include)</li>
<li>Hard Carrying Case (include) </li>
<li>NIST Traceable Certificate (include)</li>
</ul>
Features:
<ul>
<li>High dynamic range 5 ½ digit display reads even the strongest magnets with 0.1 gauss resolution, including polarity.</li>
<li>Turns on instantly, updated four times a second, no setup or initial calibration required.</li>
<li>Auto-Zero (subtracts the present field from subsequent readings); also a fine offset control.</li>
<li>Offset range is the full +/- 19,999.99 gauss.</li>
<li>1% accuracy at room temperature, including probe.</li>
<li>Probe and battery included.</li>
<li>With rubber boot and hard carrying case is available.</li>
<li>CE Compliant.</li>
</ul>
Applications:
<ul>
<li>Measures all permanent magnets. (Maximum field of magnets is about 15,000, which occurs only with rare-earth magnets in a gap configuration.)</li>
<li>High resolution of 0.1 gauss over the entire range of +19,999.9 to -19,999.9 gauss allows detection of any variation in the field from a magnet.</li>
<li>Measures inside DC Solenoids (probe is bent into “L” shape to measure this).</li>
<li>Sufficient resolution to map fields far from magnets.</li>
</ul>
Specifications:
1-axis DC Gaussmeter GM1-ST
<ul>
<li>Range/Resolution: 19,999.9 G/0.1 G; with polarity indicator</li>
<li>Accuracy: +/- 1% of reading (16° to 29°C); +/- 2% (-4° to 65°C)</li>
<li>Offset: Auto-Zero. Also fine offset (0.1 gauss resolution)</li>
<li>Probe (non-detachable): 1.5 (thick) x 4.3 x 24 mm</li>
<li>Meter Size: 5.2 x 3.6 x 1.6 inches; 132 x 91 x 41 mm</li>
<li>Weight: 8 oz</li>
<li>Battery: 9 volt alkaline (~ 40 hour life) / "Low Battery" indicator</li>
</ul>

Trifield GM1-ST Dc Gauss Meter With Boot and Carrying Case

trifield gm1-st dc gauss meter boot carrying case dengan dan tas emf frequency meters pengukur frekuensi oem oem/oem代工 gm1-st直流高斯计，带保护套和手提箱 emf和频率计 oem代工

trifield-gm1-st-dc-gauss-meter-with-boot-and-carrying-case

Cornet Electrosmog Meter
Dual-mode RF/LF Electrosmog Field Strength Power Meter
~~~ Model No. ED-85ExPlus ~~~
with external SMA connector, Frequency display
and Data Logging/recording/USB interface to PC

Manufactured in the USA by CORNET Microsystem Inc

Advanced communication and Network solutions
Affordable, Pocket Size, Handheld, High performance 
EMF/RF/LF Meter !

Unique, handy tool for your personal Electromagnetic wave exposure detection and level measurement. Highly sensitive and Accurate indicators for your defense on RF and LF radiation pollutions.

Electromagnetic Radiation (EMF) is always around our environment.
You can measure the amount of EMF around your home, office, children's school, etc!

The ED-85EXPlus Electrosmog meter is a Dual-mode device for quick measurement of both High frequency (RF) Electromagnetic wave field strength/power density level, and Low frequency (LF) Magnetic field level(Gauss, Tesla) for living environments. It is an excellent device for individual or company with Electromagnetic wave safety concerns. It has RF bandwidth (SMA connector direct input ) of 1MHz to 8GHz with high sensitivity -70dBm,(0.05uw/m² to 1.8w/m²), and LF bandwidth of 50Hz to 10KHz (or 50Hz to 1KHz) with sensitivity of 0.1uT to 60uT(1mG-600mG) or 0.01uT to 1uT(0.1mG to 10mG). Data Logging function is also included.

High frequency RF Electromagnetic wave field strength and power density measurement

Low frequency LF Magnetic field measurement (Gauss meter function)

Mobile phone base station antenna radiation power density measurement

Wireless communications, Analog & Digital RF (AM/FM, TDMA, GSM, DECT, CDMA, 3G, 4G, 5G)

Wireless LAN (Wi-Fi), Bluetooth, Ultra-wide-band detection, installation, optimization

Spy camera, wireless bug finder, IOT devices

Cellular/Cordless phone radiation safety level, Electrical Utilities SMART METER radiation level

AC power line, power Transformer, motors and small appliance EMF

Personal living environment EMF safety evaluation

Two operation mode: RF power meter mode and LF Gauss meter mode

Sensor type: Electric field sensor and Magnetic field sensor

RF: 1MHz to 8GHz (SMA connector direct input)
(-65dBm to +5dBm),(0.18uw/m2 to 1.8w/m2), (0.008v/m to 26.2v/m), -- (calibrated)
-70dBm (0.05uw/m2 )(0.004v/m) -- (uncalibrated)
*RF frequency range for field strength measurement is depend on the external antenna used. 

LF1: 50Hz to 10KHz (0.1uT to 60uT), (1mG to 600 mG)

LF2: 50Hz to 1KHz (0.01uT to 1uT), (0.1mG to 10mG)

Frequency display: 100MHz–2.7GHz for field strength measurement, (from internal build-in antenna only, not from SMA connector direct input); -35dBm minimum signal level required.

RF Peak power measurement: 0.05uw/m² to 1.8w/m² (with external antenna for RF field strength ); 0.004V/m to 26.2V/m (with external antenna for RF field strength )

Display type: digital LCD graphic display

Unit of measurements: dBm, mw/m2, v/m, uT, mG, MHz

LCD back light: 15 seconds auto-off and manual on/off control

Display of data: LCD 4 and 5 digit, 8 LED colour segment, Moving Histogram (level/time) of previous 30 recorded data, Analog segment bar

Data update rate: Sampling rate: 10,000/sec, Display update rate: 2/sec

Functions: Hold, Max, Average, Sound signature, Alarm, Frequency

Sound & Alarm: Sound on/off/volume control, programable Alarm triggering level

Safety standard indication: 3 safety range indication by 3 Red LED, adjustable LED level

Data Logging: 1000 data storage point memory for logging/recording measured RF signal level

Small, compact handheld design, 69mmx130mm

Battery used: 9V alkaline battery or external power supply through USB port (5V)

Battery life: >20 hours (battery & USB cable is not included in shipment)

Internal antenna: internal build-in antenna for Frequency display use only

External antenna: External whip antenna is included. Optional Log periodic antenna available (not included)

<h1 class="md-block-header-one">Cornet Electrosmog Meter Dual-mode RF/LF Electrosmog Field Strength Power Meter ~~~ Model No. ED-85ExPlus ~~~ with external SMA connector, Frequency display and Data Logging/recording/USB interface to PC</h1>Manufactured in the USA by CORNET Microsystem IncAdvanced communication and Network solutions Affordable, Pocket Size, Handheld, High performance EMF/RF/LF Meter !Unique, handy tool for your personal Electromagnetic wave exposure detection and level measurement. Highly sensitive and Accurate indicators for your defense on RF and LF radiation pollutions.Electromagnetic Radiation (EMF) is always around our environment. You can measure the amount of EMF around your home, office, children&#x27;s school, etc!The ED-85EXPlus Electrosmog meter is a Dual-mode device for quick measurement of both High frequency (RF) Electromagnetic wave field strength/power density level, and Low frequency (LF) Magnetic field level(Gauss, Tesla) for living environments. It is an excellent device for individual or company with Electromagnetic wave safety concerns. It has RF bandwidth (SMA connector direct input ) of 1MHz to 8GHz with high sensitivity -70dBm,(0.05uw/m² to 1.8w/m²), and LF bandwidth of 50Hz to 10KHz (or 50Hz to 1KHz) with sensitivity of 0.1uT to 60uT(1mG-600mG) or 0.01uT to 1uT(0.1mG to 10mG). Data Logging function is also included.Applications:<ul class="md-block-unordered-list-item"><li>High frequency RF Electromagnetic wave field strength and power density measurement</li><li>Low frequency LF Magnetic field measurement (Gauss meter function)</li><li>Mobile phone base station antenna radiation power density measurement</li><li>Wireless communications, Analog &amp; Digital RF (AM/FM, TDMA, GSM, DECT, CDMA, 3G, 4G, 5G)</li><li>RF power measurement for transmitters</li><li>Wireless LAN (Wi-Fi), Bluetooth, Ultra-wide-band detection, installation, optimization</li><li>Spy camera, wireless bug finder, IOT devices</li><li>Cellular/Cordless phone radiation safety level, Electrical Utilities SMART METER radiation level</li><li>AC power line, power Transformer, motors and small appliance EMF</li><li>Microwave oven leakage detection</li><li>Personal living environment EMF safety evaluation</li></ul>Features:<ul class="md-block-unordered-list-item"><li>Two operation mode: RF power meter mode and LF Gauss meter mode</li><li>Sensor type: Electric field sensor and Magnetic field sensor</li><li>Frequency range &amp; Sensitivity:</li><ul class="md-block-unordered-list-item"><li>RF: 1MHz to 8GHz (SMA connector direct input) (-65dBm to +5dBm),(0.18uw/m2 to 1.8w/m2), (0.008v/m to 26.2v/m), -- (calibrated) -70dBm (0.05uw/m2 )(0.004v/m) -- (uncalibrated) *RF frequency range for field strength measurement is depend on the external antenna used. </li><li>LF1: 50Hz to 10KHz (0.1uT to 60uT), (1mG to 600 mG)</li><li>LF2: 50Hz to 1KHz (0.01uT to 1uT), (0.1mG to 10mG)</li></ul><li>Frequency display: 100MHz–2.7GHz for field strength measurement, (from internal build-in antenna only, not from SMA connector direct input); -35dBm minimum signal level required.</li><li>Input Impedance: 50 Ohms</li><li>Connector type: SMA female</li><li>RF Peak power measurement: 0.05uw/m² to 1.8w/m² (with external antenna for RF field strength ); 0.004V/m to 26.2V/m (with external antenna for RF field strength )</li><li>Display type: digital LCD graphic display</li><li>Unit of measurements: dBm, mw/m2, v/m, uT, mG, MHz</li><li>LCD back light: 15 seconds auto-off and manual on/off control</li><li>Display of data: LCD 4 and 5 digit, 8 LED colour segment, Moving Histogram (level/time) of previous 30 recorded data, Analog segment bar</li><li>Data update rate: Sampling rate: 10,000/sec, Display update rate: 2/sec</li><li>Error rate: RF: +/- 1.5dBm, LF: 20%</li><li>Functions: Hold, Max, Average, Sound signature, Alarm, Frequency</li><li>Sound &amp; Alarm: Sound on/off/volume control, programable Alarm triggering level</li><li>Safety standard indication: 3 safety range indication by 3 Red LED, adjustable LED level</li><li>Data Logging: 1000 data storage point memory for logging/recording measured RF signal level</li><li>Small, compact handheld design, 69mmx130mm</li><li>Battery used: 9V alkaline battery or external power supply through USB port (5V)</li><li>Battery life: &gt;20 hours (battery &amp; USB cable is not included in shipment)</li><li>Internal antenna: internal build-in antenna for Frequency display use only</li><li>External antenna: External whip antenna is included. Optional Log periodic antenna available (not included)</li></ul>

<h1>Cornet Electrosmog Meter 
Dual-mode RF/LF Electrosmog Field Strength Power Meter 
~~~ Model No. ED-85ExPlus ~~~ 
with external SMA connector, Frequency display 
and Data Logging/recording/USB interface to PC</h1>
Manufactured in the USA by CORNET Microsystem Inc
Advanced communication and Network solutions 
Affordable, Pocket Size, Handheld, High performance 
EMF/RF/LF Meter !
Unique, handy tool for your personal Electromagnetic wave exposure detection and level measurement. Highly sensitive and Accurate indicators for your defense on RF and LF radiation pollutions.
Electromagnetic Radiation (EMF) is always around our environment. 
You can measure the amount of EMF around your home, office, children's school, etc!
The ED-85EXPlus Electrosmog meter is a Dual-mode device for quick measurement of both High frequency (RF) Electromagnetic wave field strength/power density level, and Low frequency (LF) Magnetic field level(Gauss, Tesla) for living environments. It is an excellent device for individual or company with Electromagnetic wave safety concerns. It has RF bandwidth (SMA connector direct input ) of 1MHz to 8GHz with high sensitivity -70dBm,(0.05uw/m² to 1.8w/m²), and LF bandwidth of 50Hz to 10KHz (or 50Hz to 1KHz) with sensitivity of 0.1uT to 60uT(1mG-600mG) or 0.01uT to 1uT(0.1mG to 10mG). Data Logging function is also included.
Applications:
<ul>
<li>High frequency RF Electromagnetic wave field strength and power density measurement</li>
<li>Low frequency LF Magnetic field measurement (Gauss meter function)</li>
<li>Mobile phone base station antenna radiation power density measurement</li>
<li>Wireless communications, Analog &amp; Digital RF (AM/FM, TDMA, GSM, DECT, CDMA, 3G, 4G, 5G)</li>
<li>RF power measurement for transmitters</li>
<li>Wireless LAN (Wi-Fi), Bluetooth, Ultra-wide-band detection, installation, optimization</li>
<li>Spy camera, wireless bug finder, IOT devices</li>
<li>Cellular/Cordless phone radiation safety level, Electrical Utilities SMART METER radiation level</li>
<li>AC power line, power Transformer, motors and small appliance EMF</li>
<li>Microwave oven leakage detection</li>
<li>Personal living environment EMF safety evaluation</li>
</ul>
Features:
<ul>
<li>Two operation mode: RF power meter mode and LF Gauss meter mode</li>
<li>Sensor type: Electric field sensor and Magnetic field sensor</li>
<li>Frequency range &amp; Sensitivity:</li>
<ul>
<li>RF: 1MHz to 8GHz (SMA connector direct input) 
(-65dBm to +5dBm),(0.18uw/m2 to 1.8w/m2), (0.008v/m to 26.2v/m), -- (calibrated) 
-70dBm (0.05uw/m2 )(0.004v/m) -- (uncalibrated) 
*RF frequency range for field strength measurement is depend on the external antenna used.&nbsp;</li>
<li>LF1: 50Hz to 10KHz (0.1uT to 60uT), (1mG to 600 mG)</li>
<li>LF2: 50Hz to 1KHz (0.01uT to 1uT), (0.1mG to 10mG)</li>
</ul>
<li>Frequency display: 100MHz–2.7GHz for field strength measurement, (from internal build-in antenna only, not from SMA connector direct input); -35dBm minimum signal level required.</li>
<li>Input Impedance: 50 Ohms</li>
<li>Connector type: SMA female</li>
<li>RF Peak power measurement: 0.05uw/m² to 1.8w/m² (with external antenna for RF field strength ); 0.004V/m to 26.2V/m (with external antenna for RF field strength )</li>
<li>Display type: digital LCD graphic display</li>
<li>Unit of measurements: dBm, mw/m2, v/m, uT, mG, MHz</li>
<li>LCD back light: 15 seconds auto-off and manual on/off control</li>
<li>Display of data: LCD 4 and 5 digit, 8 LED colour segment, Moving Histogram (level/time) of previous 30 recorded data, Analog segment bar</li>
<li>Data update rate: Sampling rate: 10,000/sec, Display update rate: 2/sec</li>
<li>Error rate: RF: +/- 1.5dBm, LF: 20%</li>
<li>Functions: Hold, Max, Average, Sound signature, Alarm, Frequency</li>
<li>Sound &amp; Alarm: Sound on/off/volume control, programable Alarm triggering level</li>
<li>Safety standard indication: 3 safety range indication by 3 Red LED, adjustable LED level</li>
<li>Data Logging: 1000 data storage point memory for logging/recording measured RF signal level</li>
<li>Small, compact handheld design, 69mmx130mm</li>
<li>Battery used: 9V alkaline battery or external power supply through USB port (5V)</li>
<li>Battery life: &gt;20 hours (battery &amp; USB cable is not included in shipment)</li>
<li>Internal antenna: internal build-in antenna for Frequency display use only</li>
<li>External antenna: External whip antenna is included. Optional Log periodic antenna available (not included)</li>
</ul>

Cornet ED85EXPlus Electrosmog Emf Rf/lf (dual-mode) Gauss Meter With Sma Connector & Data Logger

cornet ed85explus electrosmog emf rf/lf (dual-mode) gauss meter sma connector data logger rf lf (mode ganda) dengan konektor frequency meters pengukur frekuensi oem penyambung oem/oem代工 带sma连接器和数据记录器的cornet lf（双模）高斯计 emf和频率计 oem代工

cornet-ed85explus-electrosmog-emf-rf-lf-dual-mode-gauss-meter-with-sma-connector-data-logger

Fluke 190-202-III-S Scopemeter Iii Series, 200MHz Portable Oscilloscope, 2 Analogue Channels

The Fluke 190 series III scope meter is a high performance portable oscilloscope engineered for harsh environments. It has 2 channels and 200 MHz bandwidth. Perform timing or amplitude related measurements on three phases or three-axis control systems, or simply compare and contrast multiple test points in a circuit under test. Easy to store and view historical data and transfer to a PC viaUSB or Wi-Fi for analyzing data with Fluke view software. It has 2.5 GS/s sample rate. It includes SCC-293 kit which comprises CXT293 rugged protective carrying case, full-version Fluke view PC software (activation code) and a Wi-Fi dongle for wireless PC-connectivity using Fluke view-2 software.

Rated for industrial environments CAT III 1000 V/CAT IV 600 V

Large, bright color display for easy in-the-field viewing

<h3 class="md-block-header-three">Fluke 190-202-III-S Scopemeter Iii Series, 200MHz Portable Oscilloscope, 2 Analogue Channels</h3>The Fluke 190 series III scope meter is a high performance portable oscilloscope engineered for harsh environments. It has 2 channels and 200 MHz bandwidth. Perform timing or amplitude related measurements on three phases or three-axis control systems, or simply compare and contrast multiple test points in a circuit under test. Easy to store and view historical data and transfer to a PC viaUSB or Wi-Fi for analyzing data with Fluke view software. It has 2.5 GS/s sample rate. It includes SCC-293 kit which comprises CXT293 rugged protective carrying case, full-version Fluke view PC software (activation code) and a Wi-Fi dongle for wireless PC-connectivity using Fluke view-2 software.<ul class="md-block-unordered-list-item"><li>Rated for industrial environments CAT III 1000 V/CAT IV 600 V</li><li>Large, bright color display for easy in-the-field viewing</li><li>It is IP51 rated for harsh environments</li></ul>

<h3>Fluke 190-202-III-S Scopemeter Iii Series, 200MHz Portable Oscilloscope, 2 Analogue Channels</h3>
The Fluke 190 series III scope meter is a high performance portable oscilloscope engineered for harsh environments. It has 2 channels and 200 MHz bandwidth. Perform timing or amplitude related measurements on three phases or three-axis control systems, or simply compare and contrast multiple test points in a circuit under test. Easy to store and view historical data and transfer to a PC viaUSB or Wi-Fi for analyzing data with Fluke view software. It has 2.5 GS/s sample rate. It includes SCC-293 kit which comprises CXT293 rugged protective carrying case, full-version Fluke view PC software (activation code) and a Wi-Fi dongle for wireless PC-connectivity using Fluke view-2 software.
<ul>
<li>Rated for industrial environments CAT III 1000 V/CAT IV 600 V</li>
<li>Large, bright color display for easy in-the-field viewing</li>
<li>It is IP51 rated for harsh environments</li>
</ul>

fluke 190-202-iii-s scopemeter iii series, 200mhz portable oscilloscope, analogue channels seri iii, osiloskop portabel 200mhz, saluran analog oscilloscopes siri mudah alih fluke/福禄克 系列，200mhz 便携式示波器，2 个模拟通道 福禄克

fluke-190-202-iii-s-scopemeter-iii-series-200mhz-portable-oscilloscope-2-analogue-channels

Fluke 190-062-III Scopemeter Iii Series, 60MHz Portable Oscilloscope, 2 Analogue Channels

The Fluke 190 series III scope meter is a high performance portable oscilloscope engineered for harsh environments. It has 2 channels and 60 MHz bandwidth. Perform timing or amplitude related measurements on three phases or three-axis control systems, or simply compare and contrast multiple test points in a circuit under test. Easy to store and view historical data and transfer to a PC viaUSB or Wi-Fi for analyzing data with Fluke view software. It has 625 MS/s sample rate.

<h3 class="md-block-header-three">Fluke 190-062-III Scopemeter Iii Series, 60MHz Portable Oscilloscope, 2 Analogue Channels</h3>The Fluke 190 series III scope meter is a high performance portable oscilloscope engineered for harsh environments. It has 2 channels and 60 MHz bandwidth. Perform timing or amplitude related measurements on three phases or three-axis control systems, or simply compare and contrast multiple test points in a circuit under test. Easy to store and view historical data and transfer to a PC viaUSB or Wi-Fi for analyzing data with Fluke view software. It has 625 MS/s sample rate.<ul class="md-block-unordered-list-item"><li>Rated for industrial environments CAT III 1000 V/CAT IV 600 V</li><li>Large, bright color display for easy in-the-field viewing</li><li>It is IP51 rated for harsh environments</li></ul>

<h3>Fluke 190-062-III Scopemeter Iii Series, 60MHz Portable Oscilloscope, 2 Analogue Channels</h3>
The Fluke 190 series III scope meter is a high performance portable oscilloscope engineered for harsh environments. It has 2 channels and 60 MHz bandwidth. Perform timing or amplitude related measurements on three phases or three-axis control systems, or simply compare and contrast multiple test points in a circuit under test. Easy to store and view historical data and transfer to a PC viaUSB or Wi-Fi for analyzing data with Fluke view software. It has 625 MS/s sample rate.
<ul>
<li>Rated for industrial environments CAT III 1000 V/CAT IV 600 V</li>
<li>Large, bright color display for easy in-the-field viewing</li>
<li>It is IP51 rated for harsh environments</li>
</ul>

fluke 190-062-iii scopemeter iii series, 60mhz portable oscilloscope, analogue channels seri iii, osiloskop portabel 60mhz, saluran analog oscilloscopes siri mudah alih fluke/福禄克 系列，60mhz 便携式示波器，2 个模拟通道 福禄克

fluke-190-062-iii-scopemeter-iii-series-60mhz-portable-oscilloscope-2-analogue-channels

Fluke 190-204-III Scopemeter Iii Series Digital Portable Oscilloscope, 4 Analogue Channels, 200MHz

 The Fluke 190 series III high performance portable oscilloscope is engineered for harsh environments. The 190-204-III has 4 channels and 200 MHz bandwidth. You can perform timing or amplitude related measurements on three phases or three-axis control systems, or simply compare multiple test points in a circuit under test.
Easy to store and view historical data and transfer to a PC via USB or Wi-Fi for analysing data with Fluke view software. It has 2.5 GS/s sample rate.


Four channels - allows simultaneous measurement of multiple signals, making it ideal for analysing complex systems.
200 MHz bandwidth - can capture high-frequency signals, making it suitable for troubleshooting high-speed electronic components.
Rugged design - built to withstand harsh environments and can be used in challenging conditions.
Battery-powered - offers flexibility for field use without requiring a power outlet.
Safety-rated - meets stringent safety standards, ensuring safe operation in industrial settings
Large, bright colour display for easy in-the-field viewing
It is IP51 rated for harsh environments


Applications of the FLUKE-190-204-III Oscilloscope

The FLUKE-190-204-III can be used in any application where accurate measurement and analysis of electrical signals are required. Its portability and rugged design make it ideal for field work and harsh environments.


Industrial Applications
• Maintenance and Troubleshooting
• Power Quality Analysis - measuring voltage fluctuations, harmonics, and transients to ensure stable power supply.
• Motor Control - analysing motor performance, detecting faults, and optimising control systems.
• Process Control -such as temperature, pressure, and flow.
Electronics and Electrical Engineering
• Circuit Design and Testing
• Power Electronics
• RF Engineering
• Telecommunications.
Research and Development
• Scientific Research
• Prototype Testing.
• Education 

<h3 class="md-block-header-three">Fluke 190-204-III Scopemeter Iii Series Digital Portable Oscilloscope, 4 Analogue Channels, 200MHz</h3> The Fluke 190 series III high performance portable oscilloscope is engineered for harsh environments. The 190-204-III has 4 channels and 200 MHz bandwidth. You can perform timing or amplitude related measurements on three phases or three-axis control systems, or simply compare multiple test points in a circuit under test. Easy to store and view historical data and transfer to a PC via USB or Wi-Fi for analysing data with Fluke view software. It has 2.5 GS/s sample rate. <h3 class="md-block-header-three">Features and Benefits</h3>Four channels - allows simultaneous measurement of multiple signals, making it ideal for analysing complex systems. 200 MHz bandwidth - can capture high-frequency signals, making it suitable for troubleshooting high-speed electronic components. Rugged design - built to withstand harsh environments and can be used in challenging conditions. Battery-powered - offers flexibility for field use without requiring a power outlet. Safety-rated - meets stringent safety standards, ensuring safe operation in industrial settings Large, bright colour display for easy in-the-field viewing It is IP51 rated for harsh environments <h3 class="md-block-header-three">Applications of the FLUKE-190-204-III Oscilloscope</h3>The FLUKE-190-204-III can be used in any application where accurate measurement and analysis of electrical signals are required. Its portability and rugged design make it ideal for field work and harsh environments. Industrial Applications • Maintenance and Troubleshooting • Power Quality Analysis - measuring voltage fluctuations, harmonics, and transients to ensure stable power supply. • Motor Control - analysing motor performance, detecting faults, and optimising control systems. • Process Control -such as temperature, pressure, and flow. Electronics and Electrical Engineering • Circuit Design and Testing • Power Electronics • RF Engineering • Telecommunications. Research and Development • Scientific Research • Prototype Testing. • Education

<h3>Fluke 190-204-III Scopemeter Iii Series Digital Portable Oscilloscope, 4 Analogue Channels, 200MHz</h3>
&nbsp;The Fluke 190 series III high performance portable oscilloscope is engineered for harsh environments. The 190-204-III has 4 channels and 200 MHz bandwidth. You can perform timing or amplitude related measurements on three phases or three-axis control systems, or simply compare multiple test points in a circuit under test. 
Easy to store and view historical data and transfer to a PC via USB or Wi-Fi for analysing data with Fluke view software. It has 2.5 GS/s sample rate. 

<h3>Features and Benefits</h3>
Four channels - allows simultaneous measurement of multiple signals, making it ideal for analysing complex systems. 
200 MHz bandwidth - can capture high-frequency signals, making it suitable for troubleshooting high-speed electronic components. 
Rugged design - built to withstand harsh environments and can be used in challenging conditions. 
Battery-powered - offers flexibility for field use without requiring a power outlet. 
Safety-rated - meets stringent safety standards, ensuring safe operation in industrial settings 
Large, bright colour display for easy in-the-field viewing 
It is IP51 rated for harsh environments 

<h3>Applications of the FLUKE-190-204-III Oscilloscope</h3>
The FLUKE-190-204-III can be used in any application where accurate measurement and analysis of electrical signals are required. Its portability and rugged design make it ideal for field work and harsh environments. 

Industrial Applications 
• Maintenance and Troubleshooting 
• Power Quality Analysis - measuring voltage fluctuations, harmonics, and transients to ensure stable power supply. 
• Motor Control - analysing motor performance, detecting faults, and optimising control systems. 
• Process Control -such as temperature, pressure, and flow. 
Electronics and Electrical Engineering 
• Circuit Design and Testing 
• Power Electronics 
• RF Engineering 
• Telecommunications. 
Research and Development 
• Scientific Research 
• Prototype Testing. 
• Education&nbsp;

fluke 190-204-iii scopemeter iii series digital portable oscilloscope, analogue channels, 200mhz saluran analog, oscilloscopes siri osiloskop mudah alih digital, fluke/福禄克 系列数字便携式示波器，4 个模拟通道，200mhz 福禄克