Flexi

RS Pro

Mechanical Parts

mechanical-parts

O Ring

o-ring

Office & School Consumables

office-school-consumables

Office Supplies

office-supplies

Rubber Seals

rubber-seals

O-Rings and rubber seals are generally used for:

· Applications that require resistance to OIL

· Applications that are required to work in low temperatures (-0°C)

· High performance Fuel systems that requires strictly no leakage

O-rings need to be installed properly for a perfect fit and sealing. It is important that you install the O-ring in a prescribed manner to ensure your application continues to function properly. You will also ensure you increase the life of the application.

The process of installing an O-ring into a male gland is an intricate affair that should be carefully undertaken. Glide it along the shaft so as it reaches the gland. At that point, it should easily snap into place. Simple as it might sound, a number of steps will ensure that the O-ring doesn’t get damaged.

If you want to install an O-ring correctly and within a short time, here are steps to follow:

· Covering and lubricating the threading of the shaft

The threading of the shaft has the potential of tearing the rubber seal. Cover the threads using a masking tape and then lubricate them to allow for easy passage of the O-ring. The aim is to have the O-ring slide through without getting torn.

That’s a tip that will save you the stress of a torn O-ring. In fact, running the O-ring over jagged or sharp objects could get it torn. You may not be able to notice some of these tears. That’s why you should ensure you prevent them from occurring in the first place.

You will have to stretch the O-ring over the shaft. Ensure you do it evenly. Pulling from one side is a no-no. If anything, you should stretch the O-ring as little as possible. You will not just get a tighter grip but added security too.

Instead of rolling the O-ring down the shaft, slide it. If you spiral wind or roll an O-ring, it cannot be properly installed. It will also not function optimally and can even end up being damaged. If you have a lubricant, apply it on the O-ring and you will keep it rolling.

Place the female component in a manner that allows its radius to go around the corner. This should be done when you are finalizing the installation process. Ensure the lead of this component is inside the chamfer. This is how you will be able to guarantee the safety of the O-ring.

For O-rings to perform optimally, they have to be properly installed. It doesn’t just provide secure sealing but also increases the service life of the component together with the application. Don’t compromise on this process.

<h3 class="md-block-header-three">ORING NBR ID 57 X 3</h3>Primary UsageO-Rings and rubber seals are generally used for:· Applications that require resistance to OIL· Applications that are required to work in low temperatures (-0°C)· High performance Fuel systems that requires strictly no leakage<ul class="md-block-unordered-list-item"><li>Aircrafts</li><li>Marine Ships</li><li>F1 Cars</li></ul>· General Industrial Use Tips for installation of an O-ringO-rings need to be installed properly for a perfect fit and sealing. It is important that you install the O-ring in a prescribed manner to ensure your application continues to function properly. You will also ensure you increase the life of the application.So how do you install an O-ring?The process of installing an O-ring into a male gland is an intricate affair that should be carefully undertaken. Glide it along the shaft so as it reaches the gland. At that point, it should easily snap into place. Simple as it might sound, a number of steps will ensure that the O-ring doesn’t get damaged.If you want to install an O-ring correctly and within a short time, here are steps to follow:· Covering and lubricating the threading of the shaftThe threading of the shaft has the potential of tearing the rubber seal. Cover the threads using a masking tape and then lubricate them to allow for easy passage of the O-ring. The aim is to have the O-ring slide through without getting torn.· Don’t force it over sharp cornersThat’s a tip that will save you the stress of a torn O-ring. In fact, running the O-ring over jagged or sharp objects could get it torn. You may not be able to notice some of these tears. That’s why you should ensure you prevent them from occurring in the first place.· Even stretchingYou will have to stretch the O-ring over the shaft. Ensure you do it evenly. Pulling from one side is a no-no. If anything, you should stretch the O-ring as little as possible. You will not just get a tighter grip but added security too.· Don’t roll it down the shaftInstead of rolling the O-ring down the shaft, slide it. If you spiral wind or roll an O-ring, it cannot be properly installed. It will also not function optimally and can even end up being damaged. If you have a lubricant, apply it on the O-ring and you will keep it rolling.· Finishing it offPlace the female component in a manner that allows its radius to go around the corner. This should be done when you are finalizing the installation process. Ensure the lead of this component is inside the chamfer. This is how you will be able to guarantee the safety of the O-ring.For O-rings to perform optimally, they have to be properly installed. It doesn’t just provide secure sealing but also increases the service life of the component together with the application. Don’t compromise on this process.Installation Guide<figure class="md-block-image"><img src="https://storage.googleapis.com/eezee-product-images/DmU4MMN5fPFBF2~SUnGVrQ.png" alt="" /><figcaption class="md-block-image-caption"></figcaption></figure>

<h3>ORING NBR ID 57 X 3</h3>
<ins>Primary Usage</ins>
O-Rings and rubber seals are generally used for:
· Applications that require resistance to OIL
· Applications that are required to work in low temperatures (-0°C)
· High performance Fuel systems that requires strictly no leakage
<ul>
<li>Aircrafts</li>
<li>Marine Ships</li>
<li>F1 Cars</li>
</ul>
· General Industrial Use&nbsp;
<ins>Tips for installation of an O-ring</ins>
O-rings need to be installed properly for a perfect fit and sealing. It is important that you install the O-ring in a prescribed manner to ensure your application continues to function properly. You will also ensure you increase the life of the application.
<ins>So how do you install an O-ring?</ins>
The process of installing an O-ring into a male gland is an intricate affair that should be carefully undertaken. Glide it along the shaft so as it reaches the gland. At that point, it should easily snap into place. Simple as it might sound, a number of steps will ensure that the O-ring doesn’t get damaged.
If you want to install an O-ring correctly and within a short time, here are steps to follow:
· Covering and lubricating the threading of the shaft
The threading of the shaft has the potential of tearing the rubber seal. Cover the threads using a masking tape and then lubricate them to allow for easy passage of the O-ring. The aim is to have the O-ring slide through without getting torn.
· Don’t force it over sharp corners
That’s a tip that will save you the stress of a torn O-ring. In fact, running the O-ring over jagged or sharp objects could get it torn. You may not be able to notice some of these tears. That’s why you should ensure you prevent them from occurring in the first place.
· Even stretching
You will have to stretch the O-ring over the shaft. Ensure you do it evenly. Pulling from one side is a no-no. If anything, you should stretch the O-ring as little as possible. You will not just get a tighter grip but added security too.
· Don’t roll it down the shaft
Instead of rolling the O-ring down the shaft, slide it. If you spiral wind or roll an O-ring, it cannot be properly installed. It will also not function optimally and can even end up being damaged. If you have a lubricant, apply it on the O-ring and you will keep it rolling.
· Finishing it off
Place the female component in a manner that allows its radius to go around the corner. This should be done when you are finalizing the installation process. Ensure the lead of this component is inside the chamfer. This is how you will be able to guarantee the safety of the O-ring.
For O-rings to perform optimally, they have to be properly installed. It doesn’t just provide secure sealing but also increases the service life of the component together with the application. Don’t compromise on this process.
<ins>Installation Guide</ins>

 <div class="img-ctnr">
 <amp-img 
 on="tap:cev1h"
 tabindex="0"
 role="button"
 class="contain"
 layout="fill"
 src="https://storage.googleapis.com/eezee-product-images/DmU4MMN5fPFBF2~SUnGVrQ.png"
 ></amp-img>
 </div>
 
 <amp-image-lightbox 
 id="cev1h" 
 layout="nodisplay"></amp-image-lightbox>

John

Others

Optibelt

Gates

SAMTECH

VITON

V Rings

Oil Seals

Shaft Couplings

Plumbing Tools & Equipment

Ball Bearings

Hydraulic Seals

Wall Plugs, Anchors, Fixings & Kits

Vee-Belts

buyerIntroduction

Oring Nbr Id 57 X 3

oring nbr id 57 ring o-ring oem gelang oem/oem代工 o型圈 oem代工

oring-nbr-id-57-x-3

RS PRO Datasheet

STANLEY

ECLIPSE TOOLS

Contitech

Facom

PEGLER YORKSHIRE

Omron

CEJN

Vent-Axia

Screw

Plugs & Connector 

Surface Mount Resistors

Bolts

Panel Mount Indicators 

Button Switch

Electrical Wire 

Aluminium Capacitors

Air Filters

RS Components ETH SG

Rs Pro 2270588 Nitrile Rubber Seal, 28mm Id, 57mm Od, 12mm (1 Bag of 5)

rs pro 2270588 nitrile rubber seal, 28mm id, 57mm od, 12mm (1 bag 5) segel karet nitril, id 28mm, od 57mm, kantong isi seals pengedap getah beg 丁腈橡胶密封件，内径 28 毫米，外径 57 毫米，12 毫米（1 个） rs专业版

rs-pro-2270588-nitrile-rubber-seal-28mm-id-57mm-od-12mm-1-bag-of-5

Rs Pro 2270624 Nitrile Rubber Seal, 35mm Id, 57mm Od, 10mm (1 Bag of 5)

rs pro 2270624 nitrile rubber seal, 35mm id, 57mm od, 10mm (1 bag 5) segel karet nitril, id 35mm, od 57mm, kantong isi seals pengedap getah beg 丁腈橡胶密封件，内径 35mm，外径 57mm，10mm（1 个） rs专业版

rs-pro-2270624-nitrile-rubber-seal-35mm-id-57mm-od-10mm-1-bag-of-5

Rs Pro 2270612 Nitrile Rubber Seal, 32mm Id, 57mm Od, 8mm (1 Bag of 5)

rs pro 2270612 nitrile rubber seal, 32mm id, 57mm od, 8mm (1 bag 5) segel karet nitril, id 32mm, od 57mm, kantong isi seals pengedap getah beg 丁腈橡胶密封件，内径 32 毫米，外径 57 毫米，8 毫米（1 个） rs专业版

rs-pro-2270612-nitrile-rubber-seal-32mm-id-57mm-od-8mm-1-bag-of-5

H-85  Pass Card Holder - Landscape Mode & Black only

A pocket size pass card/name card/identification pass holder made of PU leather for lasting durability and long life. All the corners of the card holder are rounded off to give it a quality look. The holder is a landscape type with a punched slot at the top of the holder for use with Mylar clip or lanyard with clip. The front of the holder has a pocket (top loading slot) with a transparent rectangular plastic in front to show through the card or identification paper behind it. At the back of the holder, there is another pocket (also top loading slot) for storage of another credit card size type of card.

Ideally it is for use as a permanent identification card holder, in which case, it also acts as a card protector, preventing damage to the card.

Slotted at top for Mylar clip or lanyard c/w clip

H-85 Pass Card Holder - Landscape Mode &amp; Black onlyA pocket size pass card/name card/identification pass holder made of PU leather for lasting durability and long life. All the corners of the card holder are rounded off to give it a quality look. The holder is a landscape type with a punched slot at the top of the holder for use with Mylar clip or lanyard with clip. The front of the holder has a pocket (top loading slot) with a transparent rectangular plastic in front to show through the card or identification paper behind it. At the back of the holder, there is another pocket (also top loading slot) for storage of another credit card size type of card.Ideally it is for use as a permanent identification card holder, in which case, it also acts as a card protector, preventing damage to the card.Technical Data:<ul class="md-block-unordered-list-item"><li>Material: PU leather</li><li>Size: W:105mm x H:83mm</li><li>Orientation: Landscape Mode</li><li>For Card Size: 85mm x 57mm</li><li>Slotted at top for Mylar clip or lanyard c/w clip</li><li>Double layer &amp; extra back pocket</li><li>Individually packed</li></ul>

H-85 Pass Card Holder - Landscape Mode &amp; Black only
A pocket size pass card/name card/identification pass holder made of PU leather for lasting durability and long life. All the corners of the card holder are rounded off to give it a quality look. The holder is a landscape type with a punched slot at the top of the holder for use with Mylar clip or lanyard with clip. The front of the holder has a pocket (top loading slot) with a transparent rectangular plastic in front to show through the card or identification paper behind it. At the back of the holder, there is another pocket (also top loading slot) for storage of another credit card size type of card.
Ideally it is for use as a permanent identification card holder, in which case, it also acts as a card protector, preventing damage to the card.
Technical Data:
<ul>
<li>Material: PU leather</li>
<li>Size: W:105mm x H:83mm</li>
<li>Orientation: Landscape Mode</li>
<li>For Card Size: 85mm x 57mm</li>
<li>Slotted at top for Mylar clip or lanyard c/w clip</li>
<li>Double layer &amp; extra back pocket</li>
<li>Individually packed</li>
</ul>

Steven Ho

ifax

Astar

ARTZONE

JoJo

UHU GLUE

Delta

Filing and Storage

Whiteboard, Noticeboard & Accessories

Desk stationery

Art & School Supplies

Label Papers

Writing Materials

Cutting Products

Hooks & Strips

Stationery Tapes

H-85 Pass Card Holder Name Tag - Landscape Mode & Black Only

h-85 pass card holder name tag landscape mode black nama pemegang kartu lanskap hitam saja office supplies peralatan kantor flexi tanda kad pas mod landskap sahaja bekalan pejabat flexi/弹性 通行证卡夹名称标签 横向模式和仅限黑色 办公用品 弹性

h-85-pass-card-holder-name-tag-landscape-mode-black-only

A soft PVC card case is a protective holder designed to store and safeguard various types of cards, such as identification cards, credit cards, business cards, membership cards, and more. It is typically made from soft polyvinyl chloride (PVC) material, which is flexible, durable, and transparent, allowing for easy visibility of the enclosed card.

Overall, a soft PVC card case is a practical accessory for individuals and businesses alike, providing a convenient and protective solution for organising and storing various types of cards securely. Whether used for everyday identification, business transactions, or membership purposes, these cases offer a reliable way to keep cards safe and accessible.

This is a soft card case suitable for use to carry security card, bus card, and any credit card size type of cards. Maximum carry capacity is 2 cards. The soft card case is equipped with a top slot so that the card can be slipped through. The soft card case is made of high-quality transparent plastic and have 2 punched holes and a slot for clip use by lanyard.

S-3905 PVC Name Tag - PortraitA soft PVC card case is a protective holder designed to store and safeguard various types of cards, such as identification cards, credit cards, business cards, membership cards, and more. It is typically made from soft polyvinyl chloride (PVC) material, which is flexible, durable, and transparent, allowing for easy visibility of the enclosed card.Overall, a soft PVC card case is a practical accessory for individuals and businesses alike, providing a convenient and protective solution for organising and storing various types of cards securely. Whether used for everyday identification, business transactions, or membership purposes, these cases offer a reliable way to keep cards safe and accessible.This is a soft card case suitable for use to carry security card, bus card, and any credit card size type of cards. Maximum carry capacity is 2 cards. The soft card case is equipped with a top slot so that the card can be slipped through. The soft card case is made of high-quality transparent plastic and have 2 punched holes and a slot for clip use by lanyard.Technical Data:<ul class="md-block-unordered-list-item"><li>Overall Size: 65mm x 108mm</li><li>Card Size: Up to 57mm x 89mm</li><li>Thickness: 0.20mm</li><li>Soft Transparent PVC</li><li>Punched holes for lanyard &amp; clip</li></ul>

S-3905 PVC Name Tag - Portrait
A soft PVC card case is a protective holder designed to store and safeguard various types of cards, such as identification cards, credit cards, business cards, membership cards, and more. It is typically made from soft polyvinyl chloride (PVC) material, which is flexible, durable, and transparent, allowing for easy visibility of the enclosed card.
Overall, a soft PVC card case is a practical accessory for individuals and businesses alike, providing a convenient and protective solution for organising and storing various types of cards securely. Whether used for everyday identification, business transactions, or membership purposes, these cases offer a reliable way to keep cards safe and accessible.
This is a soft card case suitable for use to carry security card, bus card, and any credit card size type of cards. Maximum carry capacity is 2 cards. The soft card case is equipped with a top slot so that the card can be slipped through. The soft card case is made of high-quality transparent plastic and have 2 punched holes and a slot for clip use by lanyard.
Technical Data:
<ul>
<li>Overall Size: 65mm x 108mm</li>
<li>Card Size: Up to 57mm x 89mm</li>
<li>Thickness: 0.20mm</li>
<li>Soft Transparent PVC</li>
<li>Punched holes for lanyard &amp; clip</li>
</ul>

S-3905 Soft Card Case/Name Tag Holder - Portrait

s-3905 soft card case/name tag holder portrait case/tempat nama potret office supplies peralatan kantor flexi pemegang kad lembut/pemegang tanda bekalan pejabat flexi/弹性 软卡包/名牌夹 肖像 办公用品 弹性

s-3905-soft-card-case-name-tag-holder-portrait

B-48 Cotton Lanyard c/w Metal Spring Clip and Card Holder

This is a lanyard made of good quality cotton and has a circumference of 80cm in length. The spring clip and associated metallic bead stopper and clam are all chromed plated for long lasting and durability. The spring clip is made of high-quality material and has a very strong grip once it is latched on to the slot. 

The card holder is made of fully transparent quality plastic material which is soft to the touch. It can keep 2 cards of credit card size, eg. bus card, student pass or even Passion card. The soft card case is equipped with a pressure seal so as to enable it to be air-tight when closed properly.

Size: Metal clip (10mm) x String loop (400mm x 2)

Colour: Black, blue, green, grey, orange, red, yellow, and dark yellow

Note: Lanyard is separately packed as Card Case is also separately packed


<h3 class="md-block-header-three">B-48 Cotton Lanyard c/w Metal Spring Clip and Card Holder</h3>This is a lanyard made of good quality cotton and has a circumference of 80cm in length. The spring clip and associated metallic bead stopper and clam are all chromed plated for long lasting and durability. The spring clip is made of high-quality material and has a very strong grip once it is latched on to the slot. The card holder is made of fully transparent quality plastic material which is soft to the touch. It can keep 2 cards of credit card size, eg. bus card, student pass or even Passion card. The soft card case is equipped with a pressure seal so as to enable it to be air-tight when closed properly.<h3 class="md-block-header-three">Technical Data:</h3><h3 class="md-block-header-three">Lanyard:</h3><ul class="md-block-unordered-list-item"><li>Size: Metal clip (10mm) x String loop (400mm x 2)</li><li>Each piece is individually polybag</li><li>Colour: Black, blue, green, grey, orange, red, yellow, and dark yellow</li></ul><h3 class="md-block-header-three">Card Holder:</h3><ul class="md-block-unordered-list-item"><li>Overall Size: 64mm x 112mm</li><li>Card Size: Up to 57mm x 86mm (Portrait)</li><li>Thickness: 0.20mm</li><li>Soft Transparent PVC</li><li>Punched holes for lanyard &amp; clip</li></ul>Note: Lanyard is separately packed as Card Case is also separately packed

<h3>B-48 Cotton Lanyard c/w Metal Spring Clip and Card Holder</h3>
This is a lanyard made of good quality cotton and has a circumference of 80cm in length. The spring clip and associated metallic bead stopper and clam are all chromed plated for long lasting and durability. The spring clip is made of high-quality material and has a very strong grip once it is latched on to the slot.&nbsp;
The card holder is made of fully transparent quality plastic material which is soft to the touch. It can keep 2 cards of credit card size, eg. bus card, student pass or even Passion card. The soft card case is equipped with a pressure seal so as to enable it to be air-tight when closed properly.
<h3>Technical Data:</h3>
<h3>Lanyard:</h3>
<ul>
<li>Size: Metal clip (10mm) x String loop (400mm x 2)</li>
<li>Each piece is individually polybag</li>
<li>Colour: Black, blue, green, grey, orange, red, yellow, and dark yellow</li>
</ul>
<h3>Card Holder:</h3>
<ul>
<li>Overall Size: 64mm x 112mm</li>
<li>Card Size: Up to 57mm x 86mm (Portrait)</li>
<li>Thickness: 0.20mm</li>
<li>Soft Transparent PVC</li>
<li>Punched holes for lanyard &amp; clip</li>
</ul>
Note: Lanyard is separately packed as Card Case is also separately packed

Lanyard Card Holder Combo Cotton Lanyard With Quality Clip Transparent Card Holder (B-48 N T-107)

lanyard card holder combo cotton quality clip transparent (b-48 t-107) kombinasi tempat kartu katun dengan klip berkualitas transparan office supplies peralatan kantor flexi pemegang kad kombo kapas berkualiti lutsinar bekalan pejabat flexi/弹性 挂绳卡夹组合棉质挂绳带优质夹子透明卡夹 办公用品 弹性