Betex

RS Pro

Simatherm

Electronics Heating & Cooling Components

electronics-heating-cooling-components

Heaters & Radiators

heaters-radiators

Machinery

machinery

Induction Heaters

induction-heaters

simatherm Induction Heater IH 210 with FAN, 400-460V/50-60Hz
Heat large rolling bearings up to 300 kg

The most powerful table-top heater
The IH 210 is suitable for heating large workpieces and rolling bearings weighing up to 300 kg. The IH 210 is supplied with two yokes as standard. The sliding yoke allows easy loading and unloading of the bearing. As a special version, the IH 210 is equipped with fan cooling (IH 210F) for continuous operation.

· For rolling bearings weighing up to 300 kg
· Extremely simple operation thanks to the sliding yoke
· Induction coil outside of the housing, shortens the heating times and reduces energy consumption
· Particularly compact design - including the yokes only 75 kg in weight
· Special version with ventilation or larger working area area possible on request
· Automatic demagnetization
· 5-stage power consumption in combination with smaller yokes, allows smaller bearings to heat up safely and quickly with less energy
· For workpieces with an inner diameter of 60 to 640 mm
· Can heat a 210 kg bearing from 20 °C to 110 °C in 20 minutes, thus saving time and energy
· 3 year manufacturer warranty

 
Technical data for simather IH 210
Designation: Heater for large workpieces 
Voltage V / Hz / power: 
- 400 V / 50 Hz / 10.0 kVA 
- 440–480 V / 50–60 Hz / 11.5 kVA 
- 575 V / 60 Hz / 10.4 kVA 
Workpiece: 
- Maximum weight: 300 kg 
- Bore diameter: From 60 mm inner diameter to 640 mm outer diameter 
Temperature control: 
- Range: 0 – 250°C 
- Magnetic probe: yes, type K 
- Accuracy (electronic): ± 3°C 
Time control: 
- Range: 0 – 60 minutes 
 - Accuracy: ± 0.01 seconds 
Maximum temperature (approx.): 250°C 
Thermometer mode: yes 
Bearing temperature mode: yes 
Power level: 5 levels / 20-40-60-80-100% 
Automatic demagnetization / residual magnetism: yes / < 2A/cm 
Suitable for heating sealed bearings: yes 
Suitable for heating pre-greased bearings: yes 
Error guide codes: yes 
Thermal magnetic flux: yes 
Maximum magnetic flux: 1.5 T 
Control panel: Keyboard with LED-display 
Size of the operating area (WxH): 250 x 250 mm 
Coil diameter: 135 mm 
Measurements (LxWxH): 600 x 350 x 420 mm 
Overall weight including yokes: 75 kg 
Number of standard yokes: 2 
Standard yokes: 
- 70 x 70 x 420 mm for bearings with a bore diameter of at least 100 mm 
- 40 x 40 x 420 mm for bearings with a bore diameter of at least 60 mm 
Core cross-section: 70 x 70 mm 
Yoke storage: yes, integrated 
Cooling fan: yes
Sliding yoke: yes 
Housing material: aluminum 

Scope of delivery
· 1x simatherm IH 210
· 1x User manual
· 1x Temperature probe
· 1x Power cord
· 1x Protective gloves
· 1x Sliding yoke 70 x 70 for bearings with bore diameter from 100 mm
· 1x Yoke 40 x 40 for bearings with bore diameter from 60 mm

Optional:
· Yokes (14 x14 mm, 20 x 20 mm, 28 x 28 mm, 40 x 40 mm, 55 x 55 mm


Industry target groups and applications
 
Fabrication and assembly
· General mechanical engineering
· Gearbox construction (vehicles and industry)
· Pumps
· Hydraulic equipment
· Electric motor construction
· Conveyor and conveying systems

 General operations maintenance
· Metal processing industry
· Paper and cardboard factories
· Textile industry
· Larger printing plants
· Food industry
· Building services
· Vehicles (buses, trucks, rail vehicles)
· Construction machinery
· Forklifts, storage equipment/lifting devices
 
Typical components which can be heated with the IH 210
· Rolling bearings
· Gears
· Gear rims
· Shrink rings
· Pistons
· Bushings
· Sleeves
· Clutch parts

 Materials which can be heated well
· Structural steel
· Ball bearing steel
· Grey cast iron
· Cast steel

*Lead time: 3 to 4 weeks upon order confirmation

simatherm Induction Heater IH 210 with FAN, 400-460V/50-60Hz Heat large rolling bearings up to 300 kgThe most powerful table-top heater The IH 210 is suitable for heating large workpieces and rolling bearings weighing up to 300 kg. The IH 210 is supplied with two yokes as standard. The sliding yoke allows easy loading and unloading of the bearing. As a special version, the IH 210 is equipped with fan cooling (IH 210F) for continuous operation.· For rolling bearings weighing up to 300 kg · Extremely simple operation thanks to the sliding yoke · Induction coil outside of the housing, shortens the heating times and reduces energy consumption · Particularly compact design - including the yokes only 75 kg in weight · Special version with ventilation or larger working area area possible on request · Automatic demagnetization · 5-stage power consumption in combination with smaller yokes, allows smaller bearings to heat up safely and quickly with less energy · For workpieces with an inner diameter of 60 to 640 mm · Can heat a 210 kg bearing from 20 °C to 110 °C in 20 minutes, thus saving time and energy · 3 year manufacturer warranty Technical data for simather IH 210 Designation: Heater for large workpieces Voltage V / Hz / power: - 400 V / 50 Hz / 10.0 kVA - 440–480 V / 50–60 Hz / 11.5 kVA - 575 V / 60 Hz / 10.4 kVA Workpiece: - Maximum weight: 300 kg - Bore diameter: From 60 mm inner diameter to 640 mm outer diameter Temperature control: - Range: 0 – 250°C - Magnetic probe: yes, type K - Accuracy (electronic): ± 3°C Time control: - Range: 0 – 60 minutes - Accuracy: ± 0.01 seconds Maximum temperature (approx.): 250°C Thermometer mode: yes Bearing temperature mode: yes Power level: 5 levels / 20-40-60-80-100% Automatic demagnetization / residual magnetism: yes / &lt; 2A/cm Suitable for heating sealed bearings: yes Suitable for heating pre-greased bearings: yes Error guide codes: yes Thermal magnetic flux: yes Maximum magnetic flux: 1.5 T Control panel: Keyboard with LED-display Size of the operating area (WxH): 250 x 250 mm Coil diameter: 135 mm Measurements (LxWxH): 600 x 350 x 420 mm Overall weight including yokes: 75 kg Number of standard yokes: 2 Standard yokes: - 70 x 70 x 420 mm for bearings with a bore diameter of at least 100 mm - 40 x 40 x 420 mm for bearings with a bore diameter of at least 60 mm Core cross-section: 70 x 70 mm Yoke storage: yes, integrated Cooling fan: yes Sliding yoke: yes Housing material: aluminum Scope of delivery · 1x simatherm IH 210 · 1x User manual · 1x Temperature probe · 1x Power cord · 1x Protective gloves · 1x Sliding yoke 70 x 70 for bearings with bore diameter from 100 mm · 1x Yoke 40 x 40 for bearings with bore diameter from 60 mm Optional: · Yokes (14 x14 mm, 20 x 20 mm, 28 x 28 mm, 40 x 40 mm, 55 x 55 mm Industry target groups and applications Fabrication and assembly · General mechanical engineering · Gearbox construction (vehicles and industry) · Pumps · Hydraulic equipment · Electric motor construction · Conveyor and conveying systems General operations maintenance · Metal processing industry · Paper and cardboard factories · Textile industry · Larger printing plants · Food industry · Building services · Vehicles (buses, trucks, rail vehicles) · Construction machinery · Forklifts, storage equipment/lifting devices Typical components which can be heated with the IH 210 · Rolling bearings · Gears · Gear rims · Shrink rings · Pistons · Bushings · Sleeves · Clutch parts Materials which can be heated well · Structural steel · Ball bearing steel · Grey cast iron · Cast steel*Lead time: 3 to 4 weeks upon order confirmation <figure class="md-block-image"><img src="https://storage.googleapis.com/eezee-product-images/HcKUBeE6PWglncaCMC5OBh.jpg" alt="" /><figcaption class="md-block-image-caption"></figcaption></figure><figure class="md-block-image"><img src="https://storage.googleapis.com/eezee-product-images/E_b7Ko0hkR~v5jcwlDGHhX.jpg" alt="" /><figcaption class="md-block-image-caption"></figcaption></figure>

simatherm Induction Heater IH 210 with FAN, 400-460V/50-60Hz 
Heat large rolling bearings up to 300 kg
The most powerful table-top heater 
The IH 210 is suitable for heating large workpieces and rolling bearings weighing up to 300 kg. The IH 210 is supplied with two yokes as standard. The sliding yoke allows easy loading and unloading of the bearing. As a special version, the IH 210 is equipped with fan cooling (IH 210F) for continuous operation.
· For rolling bearings weighing up to 300 kg 
· Extremely simple operation thanks to the sliding yoke 
· Induction coil outside of the housing, shortens the heating times and reduces energy consumption 
· Particularly compact design - including the yokes only 75 kg in weight 
· Special version with ventilation or larger working area area possible on request 
· Automatic demagnetization 
· 5-stage power consumption in combination with smaller yokes, allows smaller bearings to heat up safely and quickly with less energy 
· For workpieces with an inner diameter of 60 to 640 mm 
· Can heat a 210 kg bearing from 20 °C to 110 °C in 20 minutes, thus saving time and energy 
· 3 year manufacturer warranty 
 
 
<ins>Technical data for simather IH 210</ins> 
Designation: Heater for large workpieces 
Voltage V / Hz / power: 
- 400 V / 50 Hz / 10.0 kVA 
- 440–480 V / 50–60 Hz / 11.5 kVA 
- 575 V / 60 Hz / 10.4 kVA 
Workpiece: 
- Maximum weight: 300 kg 
- Bore diameter: From 60 mm inner diameter to 640 mm outer diameter 
Temperature control: 
- Range: 0 – 250°C 
- Magnetic probe: yes, type K 
- Accuracy (electronic): ± 3°C 
Time control: 
- Range: 0 – 60 minutes 
 - Accuracy: ± 0.01 seconds 
Maximum temperature (approx.): 250°C 
Thermometer mode: yes 
Bearing temperature mode: yes 
Power level: 5 levels / 20-40-60-80-100% 
Automatic demagnetization / residual magnetism: yes / &lt; 2A/cm 
Suitable for heating sealed bearings: yes 
Suitable for heating pre-greased bearings: yes 
Error guide codes: yes 
Thermal magnetic flux: yes 
Maximum magnetic flux: 1.5 T 
Control panel: Keyboard with LED-display 
Size of the operating area (WxH): 250 x 250 mm 
Coil diameter: 135 mm 
Measurements (LxWxH): 600 x 350 x 420 mm 
Overall weight including yokes: 75 kg 
Number of standard yokes: 2 
Standard yokes: 
- 70 x 70 x 420 mm for bearings with a bore diameter of at least 100 mm 
- 40 x 40 x 420 mm for bearings with a bore diameter of at least 60 mm 
Core cross-section: 70 x 70 mm 
Yoke storage: yes, integrated 
Cooling fan: yes 
Sliding yoke: yes 
Housing material: aluminum 
 
<ins>Scope of delivery</ins> 
· 1x simatherm IH 210 
· 1x User manual 
· 1x Temperature probe 
· 1x Power cord 
· 1x Protective gloves 
· 1x Sliding yoke 70 x 70 for bearings with bore diameter from 100 mm 
· 1x Yoke 40 x 40 for bearings with bore diameter from 60 mm 
 
Optional: 
· Yokes (14 x14 mm, 20 x 20 mm, 28 x 28 mm, 40 x 40 mm, 55 x 55 mm 
 
 
Industry target groups and applications 
 
<ins>Fabrication and assembly</ins> 
· General mechanical engineering 
· Gearbox construction (vehicles and industry) 
· Pumps 
· Hydraulic equipment 
· Electric motor construction 
· Conveyor and conveying systems 
 
 <ins>General operations maintenance</ins> 
· Metal processing industry 
· Paper and cardboard factories 
· Textile industry 
· Larger printing plants 
· Food industry 
· Building services 
· Vehicles (buses, trucks, rail vehicles) 
· Construction machinery 
· Forklifts, storage equipment/lifting devices 
 
<ins>Typical components which can be heated with the IH 210</ins> 
· Rolling bearings 
· Gears 
· Gear rims 
· Shrink rings 
· Pistons 
· Bushings 
· Sleeves 
· Clutch parts 
 
 <ins>Materials which can be heated well</ins> 
· Structural steel 
· Ball bearing steel 
· Grey cast iron 
· Cast steel
*Lead time: 3 to 4 weeks upon order confirmation


 <div class="img-ctnr">
 <amp-img 
 on="tap:eq7aj"
 tabindex="0"
 role="button"
 class="contain"
 layout="fill"
 src="https://storage.googleapis.com/eezee-product-images/HcKUBeE6PWglncaCMC5OBh.jpg"
 ></amp-img>
 </div>
 
 <amp-image-lightbox 
 id="eq7aj" 
 layout="nodisplay"></amp-image-lightbox>

 

 <div class="img-ctnr">
 <amp-img 
 on="tap:c5nni"
 tabindex="0"
 role="button"
 class="contain"
 layout="fill"
 src="https://storage.googleapis.com/eezee-product-images/E_b7Ko0hkR~v5jcwlDGHhX.jpg"
 ></amp-img>
 </div>
 
 <amp-image-lightbox 
 id="c5nni" 
 layout="nodisplay"></amp-image-lightbox>

Technical Data

simatherm & simatool product catalog

Silver

Simalube

Lubricants

Silver 

buyerIntroduction

Simatherm Induction Heater Ih 210 With Fan (400-460V, up O 300kg)

simatherm induction heater ih 210 fan (400-460v, 300kg) pemanas induksi dengan kipas angin hingga heaters aruhan naik simatherm/西马瑟姆 感应加热器 带风扇（400-460v，重 300kg） 西马瑟姆

simatherm-induction-heater-ih-210-with-fan-400-460v-up-o-300kg

simatherm Bearing BInduction Heater IH 210, 400-460V
Heat large rolling bearings up to 300 kg

The most powerful table-top heater 
The IH 210 is suitable for heating large workpieces and rolling bearings weighing up to 300 kg. The IH 210 is supplied with two yokes as standard. The sliding yoke allows easy loading and unloading of the bearing. 

· For rolling bearings weighing up to 300 kg 
· Extremely simple operation thanks to the sliding yoke 
· Available for voltages of 200, 400–480 and 500–575 V 
· Induction coil outside of the housing, shortens the heating times and reduces energy consumption 
· Particularly compact design - including the yokes only 75 kg in weight 
· Automatic demagnetization 
· 5-stage power consumption in combination with smaller yokes, allows smaller bearings to heat up safely and quickly with less energy 
· For workpieces with an inner diameter of 60 to 640 mm 
· Can heat a 210 kg bearing from 20 °C to 110 °C in 20 minutes, thus saving time and energy 
· 3 year manufacturer warranty 

Designation: Heater for large workpieces 
Voltage V / Hz / power: 
- 400 V / 50 Hz / 10.0 kVA 
- 440–480 V / 50–60 Hz / 11.5 kVA 
- 575 V / 60 Hz / 10.4 kVA 
Workpiece: 
- Maximum weight: 300 kg 
- Bore diameter: From 60 mm inner diameter to 640 mm outer diameter 
Temperature control: 
- Range: 0 – 250°C 
- Magnetic probe: yes, type K 
- Accuracy (electronic): ± 3°C 
Time control: 
- Range: 0 – 60 minutes 
- Accuracy: ± 0.01 seconds 
Maximum temperature (approx.): 250°C 
Thermometer mode: yes 
Bearing temperature mode: yes 
Power level: 5 levels / 20-40-60-80-100% 
Automatic demagnetization / residual magnetism: yes / < 2A/cm 
Suitable for heating sealed bearings: yes 
Suitable for heating pre-greased bearings: yes 
Error guide codes: yes 
Thermal magnetic flux: yes 
Maximum magnetic flux: 1.5 T 
Control panel: Keyboard with LED-display 
Size of the operating area (WxH): 250 x 250 mm 
Coil diameter: 135 mm 
Measurements (LxWxH): 600 x 350 x 420 mm 
Overall weight including yokes: 75 kg 
Number of standard yokes: 2 
Standard yokes: 
- 70 x 70 x 420 mm for bearings with a bore diameter of at least 100 mm 
- 40 x 40 x 420 mm for bearings with a bore diameter of at least 60 mm 
Core cross-section: 70 x 70 mm 
Yoke storage: yes, integrated 
Cooling fan: optional 
Sliding yoke: yes 
Housing material: aluminum

Scope of delivery 
· 1x simatherm IH 210 
· 1x User manual 
· 1x Temperature probe 
· 1x Power cord 
· 1x Protective gloves 
· 1x Sliding yoke 70 x 70 for bearings with bore diameter from 100 mm 
· 1x Yoke 40 x 40 for bearings with bore diameter from 60 mm 

Optional: · Yokes (14 x14 mm, 20 x 20 mm, 28 x 28 mm, 40 x 40 mm, 55 x 55 mm 

 Fabrication and assembly
· General mechanical engineering
· Gearbox construction (vehicles and industry)
· Pumps
· Hydraulic equipment
· Electric motor construction
· Conveyor and conveying systems

General operations maintenance
· Metal processing industry
· Paper and cardboard factories
· Textile industry
· Larger printing plants
· Food industry
· Building services
· Vehicles (buses, trucks, rail vehicles)
· Construction machinery
· Forklifts, storage equipment/lifting devices
 
Typical components which can be heated with the IH 210
· Rolling bearings
· Gears
· Gear rims
· Shrink rings
· Pistons
· Bushings
· Sleeves
· Clutch parts

Materials which can be heated well
· Structural steel
· Ball bearing steel
· Grey cast iron
· Cast steel

simatherm Bearing BInduction Heater IH 210, 400-460V Heat large rolling bearings up to 300 kgThe most powerful table-top heater The IH 210 is suitable for heating large workpieces and rolling bearings weighing up to 300 kg. The IH 210 is supplied with two yokes as standard. The sliding yoke allows easy loading and unloading of the bearing. · For rolling bearings weighing up to 300 kg · Extremely simple operation thanks to the sliding yoke · Available for voltages of 200, 400–480 and 500–575 V · Induction coil outside of the housing, shortens the heating times and reduces energy consumption · Particularly compact design - including the yokes only 75 kg in weight · Automatic demagnetization · 5-stage power consumption in combination with smaller yokes, allows smaller bearings to heat up safely and quickly with less energy · For workpieces with an inner diameter of 60 to 640 mm · Can heat a 210 kg bearing from 20 °C to 110 °C in 20 minutes, thus saving time and energy · 3 year manufacturer warranty Technical data for simather IH 210 Designation: Heater for large workpieces Voltage V / Hz / power: - 400 V / 50 Hz / 10.0 kVA - 440–480 V / 50–60 Hz / 11.5 kVA - 575 V / 60 Hz / 10.4 kVA Workpiece: - Maximum weight: 300 kg - Bore diameter: From 60 mm inner diameter to 640 mm outer diameter Temperature control: - Range: 0 – 250°C - Magnetic probe: yes, type K - Accuracy (electronic): ± 3°C Time control: - Range: 0 – 60 minutes - Accuracy: ± 0.01 seconds Maximum temperature (approx.): 250°C Thermometer mode: yes Bearing temperature mode: yes Power level: 5 levels / 20-40-60-80-100% Automatic demagnetization / residual magnetism: yes / &lt; 2A/cm Suitable for heating sealed bearings: yes Suitable for heating pre-greased bearings: yes Error guide codes: yes Thermal magnetic flux: yes Maximum magnetic flux: 1.5 T Control panel: Keyboard with LED-display Size of the operating area (WxH): 250 x 250 mm Coil diameter: 135 mm Measurements (LxWxH): 600 x 350 x 420 mm Overall weight including yokes: 75 kg Number of standard yokes: 2 Standard yokes: - 70 x 70 x 420 mm for bearings with a bore diameter of at least 100 mm - 40 x 40 x 420 mm for bearings with a bore diameter of at least 60 mm Core cross-section: 70 x 70 mm Yoke storage: yes, integrated Cooling fan: optional Sliding yoke: yes Housing material: aluminum Scope of delivery · 1x simatherm IH 210 · 1x User manual · 1x Temperature probe · 1x Power cord · 1x Protective gloves · 1x Sliding yoke 70 x 70 for bearings with bore diameter from 100 mm · 1x Yoke 40 x 40 for bearings with bore diameter from 60 mm Optional: · Yokes (14 x14 mm, 20 x 20 mm, 28 x 28 mm, 40 x 40 mm, 55 x 55 mm Industry target groups and applications Fabrication and assembly · General mechanical engineering · Gearbox construction (vehicles and industry) · Pumps · Hydraulic equipment · Electric motor construction · Conveyor and conveying systems General operations maintenance · Metal processing industry · Paper and cardboard factories · Textile industry · Larger printing plants · Food industry · Building services · Vehicles (buses, trucks, rail vehicles) · Construction machinery · Forklifts, storage equipment/lifting devices Typical components which can be heated with the IH 210 · Rolling bearings · Gears · Gear rims · Shrink rings · Pistons · Bushings · Sleeves · Clutch parts Materials which can be heated well · Structural steel · Ball bearing steel · Grey cast iron · Cast steel*Lead time: 3 to 4 weeks upon order confirmation<figure class="md-block-image md-block-image-has-caption"><img src="https://storage.googleapis.com/eezee-product-images/s1kybNXRhBctdkyZtOjuEV.jpg" alt="
 " /><figcaption class="md-block-image-caption"> </figcaption></figure><figure class="md-block-image"><img src="https://storage.googleapis.com/eezee-product-images/JyODLzjFEAaaQ1E35iMtnL.jpg" alt="" /><figcaption class="md-block-image-caption"></figcaption></figure>

simatherm Bearing BInduction Heater IH 210, 400-460V 
Heat large rolling bearings up to 300 kg
The most powerful table-top heater 
The IH 210 is suitable for heating large workpieces and rolling bearings weighing up to 300 kg. The IH 210 is supplied with two yokes as standard. The sliding yoke allows easy loading and unloading of the bearing.&nbsp;
· For rolling bearings weighing up to 300 kg 
· Extremely simple operation thanks to the sliding yoke 
· Available for voltages of 200, 400–480 and 500–575 V 
· Induction coil outside of the housing, shortens the heating times and reduces energy consumption 
· Particularly compact design - including the yokes only 75 kg in weight 
· Automatic demagnetization 
· 5-stage power consumption in combination with smaller yokes, allows smaller bearings to heat up safely and quickly with less energy 
· For workpieces with an inner diameter of 60 to 640 mm 
· Can heat a 210 kg bearing from 20 °C to 110 °C in 20 minutes, thus saving time and energy 
· 3 year manufacturer warranty&nbsp;
<ins>Technical data for simather IH 210</ins>&nbsp;
Designation: Heater for large workpieces 
Voltage V / Hz / power: 
- 400 V / 50 Hz / 10.0 kVA 
- 440–480 V / 50–60 Hz / 11.5 kVA 
- 575 V / 60 Hz / 10.4 kVA 
Workpiece: 
- Maximum weight: 300 kg 
- Bore diameter: From 60 mm inner diameter to 640 mm outer diameter 
Temperature control: 
- Range: 0 – 250°C 
- Magnetic probe: yes, type K 
- Accuracy (electronic): ± 3°C 
Time control: 
- Range: 0 – 60 minutes 
- Accuracy: ± 0.01 seconds 
Maximum temperature (approx.): 250°C 
Thermometer mode: yes 
Bearing temperature mode: yes 
Power level: 5 levels / 20-40-60-80-100% 
Automatic demagnetization / residual magnetism: yes / &lt; 2A/cm 
Suitable for heating sealed bearings: yes 
Suitable for heating pre-greased bearings: yes 
Error guide codes: yes 
Thermal magnetic flux: yes 
Maximum magnetic flux: 1.5 T 
Control panel: Keyboard with LED-display 
Size of the operating area (WxH): 250 x 250 mm 
Coil diameter: 135 mm 
Measurements (LxWxH): 600 x 350 x 420 mm 
Overall weight including yokes: 75 kg 
Number of standard yokes: 2 
Standard yokes: 
- 70 x 70 x 420 mm for bearings with a bore diameter of at least 100 mm 
- 40 x 40 x 420 mm for bearings with a bore diameter of at least 60 mm 
Core cross-section: 70 x 70 mm 
Yoke storage: yes, integrated 
Cooling fan: optional 
Sliding yoke: yes 
Housing material: aluminum&nbsp;
<ins>Scope of delivery</ins> 
· 1x simatherm IH 210 
· 1x User manual 
· 1x Temperature probe 
· 1x Power cord 
· 1x Protective gloves 
· 1x Sliding yoke 70 x 70 for bearings with bore diameter from 100 mm 
· 1x Yoke 40 x 40 for bearings with bore diameter from 60 mm&nbsp;
Optional: · Yokes (14 x14 mm, 20 x 20 mm, 28 x 28 mm, 40 x 40 mm, 55 x 55 mm&nbsp;
Industry target groups and applications&nbsp;
&nbsp;<ins>Fabrication and assembly</ins> 
· General mechanical engineering 
· Gearbox construction (vehicles and industry) 
· Pumps 
· Hydraulic equipment 
· Electric motor construction 
· Conveyor and conveying systems 
 
<ins>General operations maintenance</ins> 
· Metal processing industry 
· Paper and cardboard factories 
· Textile industry 
· Larger printing plants 
· Food industry 
· Building services 
· Vehicles (buses, trucks, rail vehicles) 
· Construction machinery 
· Forklifts, storage equipment/lifting devices 
 
<ins>Typical components which can be heated with the IH 210</ins> 
· Rolling bearings 
· Gears 
· Gear rims 
· Shrink rings 
· Pistons 
· Bushings 
· Sleeves 
· Clutch parts 
 
<ins>Materials which can be heated well</ins> 
· Structural steel 
· Ball bearing steel 
· Grey cast iron 
· Cast steel
*Lead time: 3 to 4 weeks upon order confirmation

 <div class="img-ctnr">
 <amp-img 
 on="tap:74sn7"
 tabindex="0"
 role="button"
 class="contain"
 layout="fill"
 src="https://storage.googleapis.com/eezee-product-images/s1kybNXRhBctdkyZtOjuEV.jpg"
 ></amp-img>
 </div>
 
 <amp-image-lightbox 
 id="74sn7" 
 layout="nodisplay"></amp-image-lightbox>

 

 <div class="img-ctnr">
 <amp-img 
 on="tap:9k098"
 tabindex="0"
 role="button"
 class="contain"
 layout="fill"
 src="https://storage.googleapis.com/eezee-product-images/JyODLzjFEAaaQ1E35iMtnL.jpg"
 ></amp-img>
 </div>
 
 <amp-image-lightbox 
 id="9k098" 
 layout="nodisplay"></amp-image-lightbox>

Simatherm Bearing Induction Heater Ih 210 (400-460V, up to 300kg)

simatherm bearing induction heater ih 210 (400-460v, 300kg) pemanas induksi bantalan hingga heaters aruhan galas sehingga simatherm/西马瑟姆 轴承感应加热器 210（400-460v，最高 300kg） 西马瑟姆

simatherm-bearing-induction-heater-ih-210-400-460v-up-to-300kg

simatherm Bearing BInduction Heater IH 210, 200-230V 
Heat large rolling bearings up to 300 kg

· For rolling bearings weighing up to 300 kg
· Extremely simple operation thanks to the sliding yoke
· Available for voltages of 200, 400–480 and 500–575 V
· Induction coil outside of the housing, shortens the heating times and reduces energy consumption
· Particularly compact design - including the yokes only 75 kg in weight
· Automatic demagnetization
· 5-stage power consumption in combination with smaller yokes, allows smaller bearings to heat up safely and quickly with less energy
· For workpieces with an inner diameter of 60 to 640 mm
· Can heat a 210 kg bearing from 20 °C to 110 °C in 20 minutes, thus saving time and energy
· 3 year manufacturer warranty

 
Technical data for simather IH 210
Designation: Heater for large workpieces
Voltage V / Hz / power:
- 400 V / 50 Hz / 10.0 kVA
- 440–480 V / 50–60 Hz / 11.5 kVA
- 575 V / 60 Hz / 10.4 kVA
Workpiece:
- Maximum weight: 300 kg
- Bore diameter: From 60 mm inner diameter to 640 mm outer diameter
Temperature control: 
- Range: 0 – 250°C
- Magnetic probe: yes, type K
- Accuracy (electronic): ± 3°C
Time control:
- Range: 0 – 60 minutes
- Accuracy: ± 0.01 seconds
Maximum temperature (approx.): 250°C
Thermometer mode: yes
Bearing temperature mode: yes
Power level: 5 levels / 20-40-60-80-100%
Automatic demagnetization / residual magnetism: yes / < 2A/cm
Suitable for heating sealed bearings: yes
Suitable for heating pre-greased bearings: yes
Error guide codes: yes
Thermal magnetic flux: yes
Maximum magnetic flux: 1.5 T
Control panel: Keyboard with LED-display
Size of the operating area (WxH): 250 x 250 mm
Coil diameter: 135 mm
Measurements (LxWxH): 600 x 350 x 420 mm
Overall weight including yokes: 75 kg
Number of standard yokes: 2
Standard yokes:
- 70 x 70 x 420 mm for bearings with a bore diameter of at least 100 mm
- 40 x 40 x 420 mm for bearings with a bore diameter of at least 60 mm
Core cross-section: 70 x 70 mm
Yoke storage: yes, integrated
Cooling fan: optional
Sliding yoke: yes
Housing material: aluminum
 
Scope of delivery
· 1x simatherm IH 210
· 1x User manual
· 1x Temperature probe
· 1x Power cord
· 1x Protective gloves
· 1x Sliding yoke 70 x 70 for bearings with bore diameter from 100 mm
· 1x Yoke 40 x 40 for bearings with bore diameter from 60 mm

Optional:
· Yokes (14 x14 mm, 20 x 20 mm, 28 x 28 mm, 40 x 40 mm, 55 x 55 mm

Industry target groups and applications
 
Fabrication and assembly
· General mechanical engineering
· Gearbox construction (vehicles and industry)
· Pumps
· Hydraulic equipment
· Electric motor construction
· Conveyor and conveying systems

 General operations maintenance
· Metal processing industry
· Paper and cardboard factories
· Textile industry
· Larger printing plants
· Food industry
· Building services
· Vehicles (buses, trucks, rail vehicles)
· Construction machinery
· Forklifts, storage equipment/lifting devices
 
Typical components which can be heated with the VOLCANO
· Rolling bearings
· Gears
· Gear rims
· Shrink rings
· Pistons
· Bushings
· Sleeves
· Clutch parts

 Materials which can be heated well
· Structural steel
· Ball bearing steel
· Grey cast iron
· Cast steel

simatherm Bearing BInduction Heater IH 210, 200-230V Heat large rolling bearings up to 300 kgThe most powerful table-top heater The IH 210 is suitable for heating large workpieces and rolling bearings weighing up to 300 kg. The IH 210 is supplied with two yokes as standard. The sliding yoke allows easy loading and unloading of the bearing. As a special version, the IH 210 is equipped with fan cooling (IH 210F) for continuous operation.· For rolling bearings weighing up to 300 kg · Extremely simple operation thanks to the sliding yoke · Available for voltages of 200, 400–480 and 500–575 V · Induction coil outside of the housing, shortens the heating times and reduces energy consumption · Particularly compact design - including the yokes only 75 kg in weight · Automatic demagnetization · 5-stage power consumption in combination with smaller yokes, allows smaller bearings to heat up safely and quickly with less energy · For workpieces with an inner diameter of 60 to 640 mm · Can heat a 210 kg bearing from 20 °C to 110 °C in 20 minutes, thus saving time and energy · 3 year manufacturer warranty Technical data for simather IH 210 Designation: Heater for large workpieces Voltage V / Hz / power: - 400 V / 50 Hz / 10.0 kVA - 440–480 V / 50–60 Hz / 11.5 kVA - 575 V / 60 Hz / 10.4 kVA Workpiece: - Maximum weight: 300 kg - Bore diameter: From 60 mm inner diameter to 640 mm outer diameter Temperature control: - Range: 0 – 250°C - Magnetic probe: yes, type K - Accuracy (electronic): ± 3°C Time control: - Range: 0 – 60 minutes - Accuracy: ± 0.01 seconds Maximum temperature (approx.): 250°C Thermometer mode: yes Bearing temperature mode: yes Power level: 5 levels / 20-40-60-80-100% Automatic demagnetization / residual magnetism: yes / &lt; 2A/cm Suitable for heating sealed bearings: yes Suitable for heating pre-greased bearings: yes Error guide codes: yes Thermal magnetic flux: yes Maximum magnetic flux: 1.5 T Control panel: Keyboard with LED-display Size of the operating area (WxH): 250 x 250 mm Coil diameter: 135 mm Measurements (LxWxH): 600 x 350 x 420 mm Overall weight including yokes: 75 kg Number of standard yokes: 2 Standard yokes: - 70 x 70 x 420 mm for bearings with a bore diameter of at least 100 mm - 40 x 40 x 420 mm for bearings with a bore diameter of at least 60 mm Core cross-section: 70 x 70 mm Yoke storage: yes, integrated Cooling fan: optional Sliding yoke: yes Housing material: aluminum Scope of delivery · 1x simatherm IH 210 · 1x User manual · 1x Temperature probe · 1x Power cord · 1x Protective gloves · 1x Sliding yoke 70 x 70 for bearings with bore diameter from 100 mm · 1x Yoke 40 x 40 for bearings with bore diameter from 60 mm Optional: · Yokes (14 x14 mm, 20 x 20 mm, 28 x 28 mm, 40 x 40 mm, 55 x 55 mm Industry target groups and applications Fabrication and assembly · General mechanical engineering · Gearbox construction (vehicles and industry) · Pumps · Hydraulic equipment · Electric motor construction · Conveyor and conveying systems General operations maintenance · Metal processing industry · Paper and cardboard factories · Textile industry · Larger printing plants · Food industry · Building services · Vehicles (buses, trucks, rail vehicles) · Construction machinery · Forklifts, storage equipment/lifting devices Typical components which can be heated with the VOLCANO · Rolling bearings · Gears · Gear rims · Shrink rings · Pistons · Bushings · Sleeves · Clutch parts Materials which can be heated well · Structural steel · Ball bearing steel · Grey cast iron · Cast steel*Lead time: 3 to 4 weeks upon order confirmation <figure class="md-block-image"><img src="https://storage.googleapis.com/eezee-product-images/XBuTetHObwZeIg4hHSkoMc.jpg" alt="" /><figcaption class="md-block-image-caption"></figcaption></figure><figure class="md-block-image"><img src="https://storage.googleapis.com/eezee-product-images/Ej7SyR_Gybyklxz349lyxK.jpg" alt="" /><figcaption class="md-block-image-caption"></figcaption></figure>

simatherm Bearing BInduction Heater IH 210, 200-230V 
Heat large rolling bearings up to 300 kg
The most powerful table-top heater 
The IH 210 is suitable for heating large workpieces and rolling bearings weighing up to 300 kg. The IH 210 is supplied with two yokes as standard. The sliding yoke allows easy loading and unloading of the bearing. As a special version, the IH 210 is equipped with fan cooling (IH 210F) for continuous operation.
· For rolling bearings weighing up to 300 kg 
· Extremely simple operation thanks to the sliding yoke 
· Available for voltages of 200, 400–480 and 500–575 V 
· Induction coil outside of the housing, shortens the heating times and reduces energy consumption 
· Particularly compact design - including the yokes only 75 kg in weight 
· Automatic demagnetization 
· 5-stage power consumption in combination with smaller yokes, allows smaller bearings to heat up safely and quickly with less energy 
· For workpieces with an inner diameter of 60 to 640 mm 
· Can heat a 210 kg bearing from 20 °C to 110 °C in 20 minutes, thus saving time and energy 
· 3 year manufacturer warranty 
 
 
<ins>Technical data for simather IH 210</ins> 
Designation: Heater for large workpieces 
Voltage V / Hz / power: 
- 400 V / 50 Hz / 10.0 kVA 
- 440–480 V / 50–60 Hz / 11.5 kVA 
- 575 V / 60 Hz / 10.4 kVA 
Workpiece: 
- Maximum weight: 300 kg 
- Bore diameter: From 60 mm inner diameter to 640 mm outer diameter 
Temperature control: 
- Range: 0 – 250°C 
- Magnetic probe: yes, type K 
- Accuracy (electronic): ± 3°C 
Time control: 
- Range: 0 – 60 minutes 
- Accuracy: ± 0.01 seconds 
Maximum temperature (approx.): 250°C 
Thermometer mode: yes 
Bearing temperature mode: yes 
Power level: 5 levels / 20-40-60-80-100% 
Automatic demagnetization / residual magnetism: yes / &lt; 2A/cm 
Suitable for heating sealed bearings: yes 
Suitable for heating pre-greased bearings: yes 
Error guide codes: yes 
Thermal magnetic flux: yes 
Maximum magnetic flux: 1.5 T 
Control panel: Keyboard with LED-display 
Size of the operating area (WxH): 250 x 250 mm 
Coil diameter: 135 mm 
Measurements (LxWxH): 600 x 350 x 420 mm 
Overall weight including yokes: 75 kg 
Number of standard yokes: 2 
Standard yokes: 
- 70 x 70 x 420 mm for bearings with a bore diameter of at least 100 mm 
- 40 x 40 x 420 mm for bearings with a bore diameter of at least 60 mm 
Core cross-section: 70 x 70 mm 
Yoke storage: yes, integrated 
Cooling fan: optional 
Sliding yoke: yes 
Housing material: aluminum 
 
<ins>Scope of delivery</ins> 
· 1x simatherm IH 210 
· 1x User manual 
· 1x Temperature probe 
· 1x Power cord 
· 1x Protective gloves 
· 1x Sliding yoke 70 x 70 for bearings with bore diameter from 100 mm 
· 1x Yoke 40 x 40 for bearings with bore diameter from 60 mm 
 
Optional: 
· Yokes (14 x14 mm, 20 x 20 mm, 28 x 28 mm, 40 x 40 mm, 55 x 55 mm 
 
Industry target groups and applications 
 
<ins>Fabrication and assembly</ins> 
· General mechanical engineering 
· Gearbox construction (vehicles and industry) 
· Pumps 
· Hydraulic equipment 
· Electric motor construction 
· Conveyor and conveying systems 
 
 <ins>General operations maintenance</ins> 
· Metal processing industry 
· Paper and cardboard factories 
· Textile industry 
· Larger printing plants 
· Food industry 
· Building services 
· Vehicles (buses, trucks, rail vehicles) 
· Construction machinery 
· Forklifts, storage equipment/lifting devices 
 
<ins>Typical components which can be heated with the VOLCANO</ins> 
· Rolling bearings 
· Gears 
· Gear rims 
· Shrink rings 
· Pistons 
· Bushings 
· Sleeves 
· Clutch parts 
 
 <ins>Materials which can be heated well</ins> 
· Structural steel 
· Ball bearing steel 
· Grey cast iron 
· Cast steel
*Lead time: 3 to 4 weeks upon order confirmation


 <div class="img-ctnr">
 <amp-img 
 on="tap:l51i"
 tabindex="0"
 role="button"
 class="contain"
 layout="fill"
 src="https://storage.googleapis.com/eezee-product-images/XBuTetHObwZeIg4hHSkoMc.jpg"
 ></amp-img>
 </div>
 
 <amp-image-lightbox 
 id="l51i" 
 layout="nodisplay"></amp-image-lightbox>

 

 <div class="img-ctnr">
 <amp-img 
 on="tap:4tp35"
 tabindex="0"
 role="button"
 class="contain"
 layout="fill"
 src="https://storage.googleapis.com/eezee-product-images/Ej7SyR_Gybyklxz349lyxK.jpg"
 ></amp-img>
 </div>
 
 <amp-image-lightbox 
 id="4tp35" 
 layout="nodisplay"></amp-image-lightbox>

Simatherm Bearing Induction Heater Ih 210 (200-230V, up to 300kg)

simatherm bearing induction heater ih 210 (200-230v, 300kg) pemanas induksi bantalan hingga heaters radiators aruhan galas sehingga simatherm/西马瑟姆 轴承感应加热器 210（200-230v，最高 300kg） 西马瑟姆

simatherm-bearing-induction-heater-ih-210-200-230v-up-to-300kg

simatherm Induction Heater IH 090, 400-460V/50-60Hz; with fan
Heat smaller to medium-sized rolling bearings up to 150 kg

The compact heater for serial production
The IH 090 induction heater is suitable for heating medium to large workpieces weighing up to 150 kg. As standard, the IH 090 has a swivel arm and three yokes. Thanks to its integrated air cooling system, the IH 090 is suitable for series assembly and continuous operation.

· For rolling bearings weighing up to 150 kg
· For workpieces with an inner diameter of 20 to 400 mm
· Fan cooling for continuous operation
· Particularly compact design - including the yokes weighing only 38 kg
· Induction coil outside of the housing, shortens the heating times and reduces energy consumption
· Can heat a 90 kg bearing from 20 °C to 110 °C in 20 minutes, thus saving time and energy
· 5-stage power consumption in combination with smaller yokes, allows smaller bearings to heat up safely and quickly with less energy
· Automatic demagnetization
· Supplied with three yokes as standard
· Swivel arm including yoke adapter so that swivel arm can also be used with small yokes
· 3 year manufacturer warranty

Technical data for simatherm IH 090
Designation: Heater with cooling fan for continuous operation with small to medium workpieces
Voltage V / Hz / power:
- 400 V / 50 Hz / 6.4 kVA
- 440 – 480 V / 50–60 Hz / 7.4 kVA
- 575 V / 60 Hz / 9.2 kVA
Workpiece Maximum weight: 150kg
Bore diameter: From 20 mm inner diameter to 400 mm outer diameter
Temperature control:
- Range: 0 – 250°C
- Magnetic probe: yes, type K
- Accuracy (electronic): ± 3°C
Time control:
- Range: 0 – 60 minutes
 - Accuracy: ± 0.01 seconds
Maximum temperature (approx.): 250°C
Thermometer mode: yes
Bearing temperature mode: yes
Power level: 5 levels / 20-40-60-80-100%
Automatic demagnetization / residual magnetism: yes / < 2A/cm
Suitable for heating sealed bearings: yes
Suitable for heating pre-greased bearings: yes
Error guide codes: yes
Thermal overload protection: yes
Maximum magnetic flux: 1.5 T
Control panel: Keyboard with LED-display
Size of the operating area (WxH): 145 x 205 mm
Coil diameter: 115 mm
Measurements (LxWxH): 420 x 280 x 420 mm
Overall weight including yokes: 38 kg
Number of standard yokes: 3
Standard yokes:
- 55 x 55 x 275 mm for bearings with a bore diameter of at least 78 mm 
- 28 x 28 x 275 mm for bearings with a bore diameter of at least 40 mm 
- 14 x 14 x 275 mm for bearings with a bore diameter of at least 20 mm
Core cross-section: 55 x 55 mm
Yoke storage: yes, integrated
Cooling fan: standard
Swivel arm: yes
Housing material: aluminum

Scope of delivery
· 1x simatherm IH 090
· 1x User manual
· 1x Temperature probe
· 1x Power cord
· 1x Protective gloves
· 1x Swivel arm
· 1x Yoke adapter
· 1x Yoke 14x14 for bearings with bore diameter from 20 mm
· 1x Yoke 28x28 for bearings with bore diameter from 40 mm
· 1x Yoke 55x55 for bearings with bore diameter from 78 mm
Optional:
· Yokes (10 x10 mm, 20 x 20 mm, 40 x 40 mm)


Industry target groups and applications
 
Fabrication and assembly 
· General mechanical engineering
· Gearbox construction (vehicles and industry)
· Pumps
· Hydraulic equipment
· Electric motor construction
· Conveyor and conveying systems

General operations maintenance
· Metal processing industry
· Paper and cardboard factories
· Textile industry
· Larger printing plants
· Food industry
· Building services
· Vehicles (buses, trucks, rail vehicles)
· Construction machinery
· Forklifts, storage equipment / lifting devices

Typical components which can be heated with the IH090 
· Rolling bearings
· Gears
· Gear rims
· Shrink rings
· Pistons
· Bushings
· Sleeves
· Clutch parts

Materials which can be heated well
· Structural steel
· Ball bearing steel
· Grey cast iron
· Cast steel

simatherm Induction Heater IH 090, 400-460V/50-60Hz; with fan Heat smaller to medium-sized rolling bearings up to 150 kg The compact heater for serial production The IH 090 induction heater is suitable for heating medium to large workpieces weighing up to 150 kg. As standard, the IH 090 has a swivel arm and three yokes. Thanks to its integrated air cooling system, the IH 090 is suitable for series assembly and continuous operation. · For rolling bearings weighing up to 150 kg · For workpieces with an inner diameter of 20 to 400 mm · Fan cooling for continuous operation · Particularly compact design - including the yokes weighing only 38 kg · Induction coil outside of the housing, shortens the heating times and reduces energy consumption · Can heat a 90 kg bearing from 20 °C to 110 °C in 20 minutes, thus saving time and energy · 5-stage power consumption in combination with smaller yokes, allows smaller bearings to heat up safely and quickly with less energy · Automatic demagnetization · Supplied with three yokes as standard · Swivel arm including yoke adapter so that swivel arm can also be used with small yokes · 3 year manufacturer warranty Technical data for simatherm IH 090 Designation: Heater with cooling fan for continuous operation with small to medium workpieces Voltage V / Hz / power: - 400 V / 50 Hz / 6.4 kVA - 440 – 480 V / 50–60 Hz / 7.4 kVA - 575 V / 60 Hz / 9.2 kVA Workpiece Maximum weight: 150kg Bore diameter: From 20 mm inner diameter to 400 mm outer diameter Temperature control: - Range: 0 – 250°C - Magnetic probe: yes, type K - Accuracy (electronic): ± 3°C Time control: - Range: 0 – 60 minutes - Accuracy: ± 0.01 seconds Maximum temperature (approx.): 250°C Thermometer mode: yes Bearing temperature mode: yes Power level: 5 levels / 20-40-60-80-100% Automatic demagnetization / residual magnetism: yes / &lt; 2A/cm Suitable for heating sealed bearings: yes Suitable for heating pre-greased bearings: yes Error guide codes: yes Thermal overload protection: yes Maximum magnetic flux: 1.5 T Control panel: Keyboard with LED-display Size of the operating area (WxH): 145 x 205 mm Coil diameter: 115 mm Measurements (LxWxH): 420 x 280 x 420 mm Overall weight including yokes: 38 kg Number of standard yokes: 3 Standard yokes: - 55 x 55 x 275 mm for bearings with a bore diameter of at least 78 mm - 28 x 28 x 275 mm for bearings with a bore diameter of at least 40 mm - 14 x 14 x 275 mm for bearings with a bore diameter of at least 20 mm Core cross-section: 55 x 55 mm Yoke storage: yes, integrated Cooling fan: standard Swivel arm: yes Housing material: aluminum Scope of delivery · 1x simatherm IH 090 · 1x User manual · 1x Temperature probe · 1x Power cord · 1x Protective gloves · 1x Swivel arm · 1x Yoke adapter · 1x Yoke 14x14 for bearings with bore diameter from 20 mm · 1x Yoke 28x28 for bearings with bore diameter from 40 mm · 1x Yoke 55x55 for bearings with bore diameter from 78 mm Optional: · Yokes (10 x10 mm, 20 x 20 mm, 40 x 40 mm) Industry target groups and applications Fabrication and assembly · General mechanical engineering · Gearbox construction (vehicles and industry) · Pumps · Hydraulic equipment · Electric motor construction · Conveyor and conveying systems General operations maintenance · Metal processing industry · Paper and cardboard factories · Textile industry · Larger printing plants · Food industry · Building services · Vehicles (buses, trucks, rail vehicles) · Construction machinery · Forklifts, storage equipment / lifting devices Typical components which can be heated with the IH090 · Rolling bearings · Gears · Gear rims · Shrink rings · Pistons · Bushings · Sleeves · Clutch parts Materials which can be heated well · Structural steel · Ball bearing steel · Grey cast iron · Cast steel*Lead time: 3 to 4 weeks upon order confirmation <figure class="md-block-image"><img src="https://storage.googleapis.com/eezee-product-images/BgvSA_6g~zSPhZMt2cO6sA.jpg" alt="" /><figcaption class="md-block-image-caption"></figcaption></figure>

simatherm Induction Heater IH 090, 400-460V/50-60Hz; with fan 
Heat smaller to medium-sized rolling bearings up to 150 kg 
 
The compact heater for serial production 
The IH 090 induction heater is suitable for heating medium to large workpieces weighing up to 150 kg. As standard, the IH 090 has a swivel arm and three yokes. Thanks to its integrated air cooling system, the IH 090 is suitable for series assembly and continuous operation. 
 
· For rolling bearings weighing up to 150 kg 
· For workpieces with an inner diameter of 20 to 400 mm 
· Fan cooling for continuous operation 
· Particularly compact design - including the yokes weighing only 38 kg 
· Induction coil outside of the housing, shortens the heating times and reduces energy consumption 
· Can heat a 90 kg bearing from 20 °C to 110 °C in 20 minutes, thus saving time and energy 
· 5-stage power consumption in combination with smaller yokes, allows smaller bearings to heat up safely and quickly with less energy 
· Automatic demagnetization 
· Supplied with three yokes as standard 
· Swivel arm including yoke adapter so that swivel arm can also be used with small yokes 
· 3 year manufacturer warranty 
 
<ins>Technical data for simatherm IH 090</ins> 
Designation: Heater with cooling fan for continuous operation with small to medium workpieces 
Voltage V / Hz / power: 
- 400 V / 50 Hz / 6.4 kVA 
- 440 – 480 V / 50–60 Hz / 7.4 kVA 
- 575 V / 60 Hz / 9.2 kVA 
Workpiece Maximum weight: 150kg 
Bore diameter: From 20 mm inner diameter to 400 mm outer diameter 
Temperature control: 
- Range: 0 – 250°C 
- Magnetic probe: yes, type K 
- Accuracy (electronic): ± 3°C 
Time control: 
- Range: 0 – 60 minutes 
 - Accuracy: ± 0.01 seconds 
Maximum temperature (approx.): 250°C 
Thermometer mode: yes 
Bearing temperature mode: yes 
Power level: 5 levels / 20-40-60-80-100% 
Automatic demagnetization / residual magnetism: yes / &lt; 2A/cm 
Suitable for heating sealed bearings: yes 
Suitable for heating pre-greased bearings: yes 
Error guide codes: yes 
Thermal overload protection: yes 
Maximum magnetic flux: 1.5 T 
Control panel: Keyboard with LED-display 
Size of the operating area (WxH): 145 x 205 mm 
Coil diameter: 115 mm 
Measurements (LxWxH): 420 x 280 x 420 mm 
Overall weight including yokes: 38 kg 
Number of standard yokes: 3 
Standard yokes: 
- 55 x 55 x 275 mm for bearings with a bore diameter of at least 78 mm 
- 28 x 28 x 275 mm for bearings with a bore diameter of at least 40 mm 
- 14 x 14 x 275 mm for bearings with a bore diameter of at least 20 mm 
Core cross-section: 55 x 55 mm 
Yoke storage: yes, integrated 
Cooling fan: standard 
Swivel arm: yes 
Housing material: aluminum 
 
<ins>Scope of delivery</ins> 
· 1x simatherm IH 090 
· 1x User manual 
· 1x Temperature probe 
· 1x Power cord 
· 1x Protective gloves 
· 1x Swivel arm 
· 1x Yoke adapter 
· 1x Yoke 14x14 for bearings with bore diameter from 20 mm 
· 1x Yoke 28x28 for bearings with bore diameter from 40 mm 
· 1x Yoke 55x55 for bearings with bore diameter from 78 mm 
Optional: 
· Yokes (10 x10 mm, 20 x 20 mm, 40 x 40 mm) 
 
 
Industry target groups and applications 
 
<ins>Fabrication and assembly</ins> 
· General mechanical engineering 
· Gearbox construction (vehicles and industry) 
· Pumps 
· Hydraulic equipment 
· Electric motor construction 
· Conveyor and conveying systems 
 
<ins>General operations maintenance</ins> 
· Metal processing industry 
· Paper and cardboard factories 
· Textile industry 
· Larger printing plants 
· Food industry 
· Building services 
· Vehicles (buses, trucks, rail vehicles) 
· Construction machinery 
· Forklifts, storage equipment / lifting devices 
 
<ins>Typical components which can be heated with the IH090</ins> 
· Rolling bearings 
· Gears 
· Gear rims 
· Shrink rings 
· Pistons 
· Bushings 
· Sleeves 
· Clutch parts 
 
<ins>Materials which can be heated well</ins> 
· Structural steel 
· Ball bearing steel 
· Grey cast iron 
· Cast steel
*Lead time: 3 to 4 weeks upon order confirmation


 <div class="img-ctnr">
 <amp-img 
 on="tap:b5kmc"
 tabindex="0"
 role="button"
 class="contain"
 layout="fill"
 src="https://storage.googleapis.com/eezee-product-images/BgvSA_6g~zSPhZMt2cO6sA.jpg"
 ></amp-img>
 </div>
 
 <amp-image-lightbox 
 id="b5kmc" 
 layout="nodisplay"></amp-image-lightbox>

Simatherm Bearing Induction Heater Ih 090 (up to 150kg)

simatherm bearing induction heater ih 090 (up 150kg) pemanas induksi bantalan (hingga heaters aruhan (sehingga simatherm/西马瑟姆 轴承感应加热器 090（最大 150kg） 西马瑟姆

simatherm-bearing-induction-heater-ih-090-up-to-150kg

simatherm Induction Heater IH 070, 230V/50-60Hz
Heat small to medium-sized rolling bearings up to 120 kg

The popular all-round heater for flexible use
The IH 070 is suitable for heating small and medium-sized workpieces up to 120 kg. Due to the external induction coil, the unit works extremely efficiently. The power can be adjusted in four stages if required.

· For rolling bearings weighing up to 120 kg
· For workpieces with an inner diameter of 20 to 400 mm
· Swivel arm available as an option
· 5-stage power consumption combined with smaller yokes, allows smaller bearings to be heated safely and quickly with less energy
· Supplied with three yokes as standard
· Particularly compact design - including the yokes only 35 kg in weight
· 3 year manufacturer warranty
· Can heat a 65 kg bearing from 20 °C to 110 °C in 20 minutes, thus saving time and energy
· Automatic demagnetization


Technical data for simatherm IH 070
Designation: Heater for small to medium workpieces
Voltage V / Hz / power:
- 100 V / 50 – 60 Hz / 1.5 kVA
- 110 – 120 V / 60 Hz / 3.7 kVA
- 220 – 240 V / 50 – 60 Hz / 3.7 kVA
Workpiece:
- Maximum weight: 120 kg
- Bore diameter: From 20 mm inner diameter to 400 mm outer diameter
Temperature control: 
- Range: 0 – 250°C
- Magnetic probe: yes, type K
- Accuracy (electronic): ± 3°C
Time control:
Range: 0 – 60 minutes
Accuracy: ± 0.01 seconds
Maximum temperature (approx.): 250°C
Thermometer mode: yes
Bearing temperature mode: yes
Power level: 5 levels / 20-40-60-80-100%
Automatic demagnetization / residual magnetism: yes / < 2A/cm
Suitable for heating sealed bearings: yes
Suitable for heating pre-greased bearings: yes
Suitability for precision bearings: yes
Error guide codes: yes
Thermal overload protection: yes
Maximum magnetic flux: 1.5 T
Control panel: Keyboard wtih LED-display
Size of the operating area (WxH): 145 x 205 mm
Coil diameter: 115 mm
Measurements (LxWxH): 420 x 280 x 345 mm
Overall weight including yokes: 35 kg
Number of standard yokes: 3
Standard yokes:
- 55 x 55 x 275 mm for bearings with a bore diameter of at least 78 mm
- 28 x 28 x 275 mm for bearings with a bore diameter of at least 40 mm
- 14 x 14 x 275 mm for bearings with a bore diameter of at least 20 mm
Core cross-section: 55 x 55 mm
Yoke storage: yes, integrated
Swivel arm: optional
Housing material: aluminum


Scope of delivery
· 1x simatherm IH 070
· 1x User manual
· 1x Temperature probe
· 1x Protective gloves
· 1x Power cord
· 1x Yoke 14x14 for bearings with a bore diameter from 20 mm
· 1x Yoke 28x28 for bearings with a bore diameter from 40 mm
· 1x Yoke 55x55 for bearings with a bore diameter from 78 mm

Optional:
· Swivel arm
· Yoke adapter
· Yokes (10 x10 mm, 20 x 20 mm, 40 x 40 mm)


Industry target groups and applications

Fabrication and assembly
· General mechanical engineering
· Gearbox construction (vehicles and industry)
· Pumps
· Hydraulic equipment
· Electric motor construction
· Conveyor and conveying systems

General operations maintenance
· Metal processing industry
· Paper and cardboard factories
· Textile industry
· Larger printing plants
· Food industry
· Building services
· Vehicles (buses, trucks, rail vehicles)
· Construction machinery
· Forklifts, storage equipment / lifting devices

Typical components which can be heated with the IH 070
· Rolling bearings
· Gears
· Gear rims
· Shrink rings
· Pistons
· Bushings
· Sleeves
· Clutch parts

 Materials which can be heated well
· Structural steel
· Ball bearing steel
· Grey cast iron
· Cast steel

simatherm Induction Heater IH 070, 230V/50-60Hz Heat small to medium-sized rolling bearings up to 120 kg The popular all-round heater for flexible use The IH 070 is suitable for heating small and medium-sized workpieces up to 120 kg. Due to the external induction coil, the unit works extremely efficiently. The power can be adjusted in four stages if required.· For rolling bearings weighing up to 120 kg · For workpieces with an inner diameter of 20 to 400 mm · Swivel arm available as an option · 5-stage power consumption combined with smaller yokes, allows smaller bearings to be heated safely and quickly with less energy · Supplied with three yokes as standard · Particularly compact design - including the yokes only 35 kg in weight · 3 year manufacturer warranty · Can heat a 65 kg bearing from 20 °C to 110 °C in 20 minutes, thus saving time and energy · Automatic demagnetization Technical data for simatherm IH 070 Designation: Heater for small to medium workpieces Voltage V / Hz / power: - 100 V / 50 – 60 Hz / 1.5 kVA - 110 – 120 V / 60 Hz / 3.7 kVA - 220 – 240 V / 50 – 60 Hz / 3.7 kVA Workpiece: - Maximum weight: 120 kg - Bore diameter: From 20 mm inner diameter to 400 mm outer diameter Temperature control: - Range: 0 – 250°C - Magnetic probe: yes, type K - Accuracy (electronic): ± 3°C Time control: Range: 0 – 60 minutes Accuracy: ± 0.01 seconds Maximum temperature (approx.): 250°C Thermometer mode: yes Bearing temperature mode: yes Power level: 5 levels / 20-40-60-80-100% Automatic demagnetization / residual magnetism: yes / &lt; 2A/cm Suitable for heating sealed bearings: yes Suitable for heating pre-greased bearings: yes Suitability for precision bearings: yes Error guide codes: yes Thermal overload protection: yes Maximum magnetic flux: 1.5 T Control panel: Keyboard wtih LED-display Size of the operating area (WxH): 145 x 205 mm Coil diameter: 115 mm Measurements (LxWxH): 420 x 280 x 345 mm Overall weight including yokes: 35 kg Number of standard yokes: 3 Standard yokes: - 55 x 55 x 275 mm for bearings with a bore diameter of at least 78 mm - 28 x 28 x 275 mm for bearings with a bore diameter of at least 40 mm - 14 x 14 x 275 mm for bearings with a bore diameter of at least 20 mm Core cross-section: 55 x 55 mm Yoke storage: yes, integrated Swivel arm: optional Housing material: aluminum Scope of delivery · 1x simatherm IH 070 · 1x User manual · 1x Temperature probe · 1x Protective gloves · 1x Power cord · 1x Yoke 14x14 for bearings with a bore diameter from 20 mm · 1x Yoke 28x28 for bearings with a bore diameter from 40 mm · 1x Yoke 55x55 for bearings with a bore diameter from 78 mm Optional: · Swivel arm · Yoke adapter · Yokes (10 x10 mm, 20 x 20 mm, 40 x 40 mm) Industry target groups and applications Fabrication and assembly · General mechanical engineering · Gearbox construction (vehicles and industry) · Pumps · Hydraulic equipment · Electric motor construction · Conveyor and conveying systems General operations maintenance · Metal processing industry · Paper and cardboard factories · Textile industry · Larger printing plants · Food industry · Building services · Vehicles (buses, trucks, rail vehicles) · Construction machinery · Forklifts, storage equipment / lifting devices Typical components which can be heated with the IH 070 · Rolling bearings · Gears · Gear rims · Shrink rings · Pistons · Bushings · Sleeves · Clutch parts Materials which can be heated well · Structural steel · Ball bearing steel · Grey cast iron · Cast steel*Lead time: 3 to 4 weeks upon order confirmation <figure class="md-block-image"><img src="https://storage.googleapis.com/eezee-product-images/Ljsca2TLbC8PlDdp0lZA3_.jpg" alt="" /><figcaption class="md-block-image-caption"></figcaption></figure><figure class="md-block-image"><img src="https://storage.googleapis.com/eezee-product-images/V59TT11LP0Di3MYHBcNCp4.jpg" alt="" /><figcaption class="md-block-image-caption"></figcaption></figure>

simatherm Induction Heater IH 070, 230V/50-60Hz 
Heat small to medium-sized rolling bearings up to 120 kg 
 
The popular all-round heater for flexible use 
The IH 070 is suitable for heating small and medium-sized workpieces up to 120 kg. Due to the external induction coil, the unit works extremely efficiently. The power can be adjusted in four stages if required.
· For rolling bearings weighing up to 120 kg 
· For workpieces with an inner diameter of 20 to 400 mm 
· Swivel arm available as an option 
· 5-stage power consumption combined with smaller yokes, allows smaller bearings to be heated safely and quickly with less energy 
· Supplied with three yokes as standard 
· Particularly compact design - including the yokes only 35 kg in weight 
· 3 year manufacturer warranty 
· Can heat a 65 kg bearing from 20 °C to 110 °C in 20 minutes, thus saving time and energy 
· Automatic demagnetization 
 
 
<ins>Technical data for simatherm IH 070</ins> 
Designation: Heater for small to medium workpieces 
Voltage V / Hz / power: 
- 100 V / 50 – 60 Hz / 1.5 kVA 
- 110 – 120 V / 60 Hz / 3.7 kVA 
- 220 – 240 V / 50 – 60 Hz / 3.7 kVA 
Workpiece: 
- Maximum weight: 120 kg 
- Bore diameter: From 20 mm inner diameter to 400 mm outer diameter 
Temperature control: 
- Range: 0 – 250°C 
- Magnetic probe: yes, type K 
- Accuracy (electronic): ± 3°C 
Time control: 
Range: 0 – 60 minutes 
Accuracy: ± 0.01 seconds 
Maximum temperature (approx.): 250°C 
Thermometer mode: yes 
Bearing temperature mode: yes 
Power level: 5 levels / 20-40-60-80-100% 
Automatic demagnetization / residual magnetism: yes / &lt; 2A/cm 
Suitable for heating sealed bearings: yes 
Suitable for heating pre-greased bearings: yes 
Suitability for precision bearings: yes 
Error guide codes: yes 
Thermal overload protection: yes 
Maximum magnetic flux: 1.5 T 
Control panel: Keyboard wtih LED-display 
Size of the operating area (WxH): 145 x 205 mm 
Coil diameter: 115 mm 
Measurements (LxWxH): 420 x 280 x 345 mm 
Overall weight including yokes: 35 kg 
Number of standard yokes: 3 
Standard yokes: 
- 55 x 55 x 275 mm for bearings with a bore diameter of at least 78 mm 
- 28 x 28 x 275 mm for bearings with a bore diameter of at least 40 mm 
- 14 x 14 x 275 mm for bearings with a bore diameter of at least 20 mm 
Core cross-section: 55 x 55 mm 
Yoke storage: yes, integrated 
Swivel arm: optional 
Housing material: aluminum 
 
 
<ins>Scope of delivery</ins> 
· 1x simatherm IH 070 
· 1x User manual 
· 1x Temperature probe 
· 1x Protective gloves 
· 1x Power cord 
· 1x Yoke 14x14 for bearings with a bore diameter from 20 mm 
· 1x Yoke 28x28 for bearings with a bore diameter from 40 mm 
· 1x Yoke 55x55 for bearings with a bore diameter from 78 mm 
 
Optional: 
· Swivel arm 
· Yoke adapter 
· Yokes (10 x10 mm, 20 x 20 mm, 40 x 40 mm) 
 
 
Industry target groups and applications 
 
<ins>Fabrication and assembly</ins> 
· General mechanical engineering 
· Gearbox construction (vehicles and industry) 
· Pumps 
· Hydraulic equipment 
· Electric motor construction 
· Conveyor and conveying systems 
 
<ins>General operations maintenance</ins> 
· Metal processing industry 
· Paper and cardboard factories 
· Textile industry 
· Larger printing plants 
· Food industry 
· Building services 
· Vehicles (buses, trucks, rail vehicles) 
· Construction machinery 
· Forklifts, storage equipment / lifting devices 
 
<ins>Typical components which can be heated with the IH 070</ins> 
· Rolling bearings 
· Gears 
· Gear rims 
· Shrink rings 
· Pistons 
· Bushings 
· Sleeves 
· Clutch parts 
 
 <ins>Materials which can be heated well</ins> 
· Structural steel 
· Ball bearing steel 
· Grey cast iron 
· Cast steel
*Lead time: 3 to 4 weeks upon order confirmation


 <div class="img-ctnr">
 <amp-img 
 on="tap:eufju"
 tabindex="0"
 role="button"
 class="contain"
 layout="fill"
 src="https://storage.googleapis.com/eezee-product-images/Ljsca2TLbC8PlDdp0lZA3_.jpg"
 ></amp-img>
 </div>
 
 <amp-image-lightbox 
 id="eufju" 
 layout="nodisplay"></amp-image-lightbox>

 

 <div class="img-ctnr">
 <amp-img 
 on="tap:ee0am"
 tabindex="0"
 role="button"
 class="contain"
 layout="fill"
 src="https://storage.googleapis.com/eezee-product-images/V59TT11LP0Di3MYHBcNCp4.jpg"
 ></amp-img>
 </div>
 
 <amp-image-lightbox 
 id="ee0am" 
 layout="nodisplay"></amp-image-lightbox>

Simatherm Bearing Induction Heater Ih 070 (up to 120kg)

simatherm bearing induction heater ih 070 (up 120kg) pemanas induksi bantalan (hingga heaters radiators aruhan galas (sehingga simatherm/西马瑟姆 轴承感应加热器 070（最大 120kg） 西马瑟姆

simatherm-bearing-induction-heater-ih-070-up-to-120kg

simatherm Induction Heater IH 045
Heat the most common rolling bearings up to 45 kg

World's first controllable induction heater with an app
The IH 045 is suitable for heating small and medium-sized workpieces up to 45 kg. Due to the external induction coil, the unit works extremely efficiently. The power can be adjusted in eight stages if required.

· Connectivity with the "simatec World of Maintenance" app
· Remote control
· For rolling bearings weighing up to 45 kg
· For workpieces with an inner diameter of 20 to 310 mm
· Available for voltages of 100, 115 and 230 V
· 8-stage power consumption combined with smaller yokes, allows smaller bearings to be heated safely and quickly with less energy
· Extendable bearing support arms
· Smallest and fastest device in its performance class
· Smallest external induction coil
· Supplied with three yokes as standard
· Particularly compact design - including the yokes only 17 kg in weight
· 3 year manufacturer warranty
· Can heat a 28 kg bearing from 20 °C to 110 °C in 20 minutes, thus saving time and energy
· Automatic demagnetization

Technical data for simatherm IH 045
Designation: Heater for the most common rolling bearings
Voltage V / Hz / power:
- 100 V / 50 – 60 Hz / 1.5 kVA
- 110 – 120 V / 50 – 60 Hz / 1.7 kVA
- 220 – 240 V / 50 – 60 Hz / 2.1 kVA
Workpiece Maximum weight: 45kg
Bore diameter: From 20 mm inner diameter to 310 mm outer diameter
Temperature control:
- Range: 20 – 180°C
- Magnetic probe: Type K
- Accuracy (electronic): ± 3°C
Time control:
- Range: 0 – 60 minutes
- Accuracy: ± 0.01 seconds
Maximum temperature (approx.): 180 °C
Thermometer mode: yes
Two-sensor technology: yes
Bearing temperature mode: yes
Power level: 8 levels / 10-20-30-40-50-60-80-100%
Automatic demagnetization / residual magnetism: yes / < 2A/cm
Suitable for heating sealed bearings: yes
Suitable for heating pre-greased bearings: yes
Suitability for precision bearings: yes
Thermal overload protection: yes
Maximum magnetic flux: 1.5 T
Control panel: Keyboard wtih LED-display or remote control via app
Size of the operating area (WxH): 114 x 160 mm
Coil diameter: 89 mm
Measurements (LxWxH): 320 x 267 x 293 mm
Overall weight including yokes: 17 kg
Number of standard yokes: 3
Standard yokes:
- 42.5 x 42.5 x 219 mm for bearings with a bore diameter of at least 60 mm
- 28 x 28 x 219 mm for bearings with a bore diameter of at least 40 mm
- 14 x 14 x 219 mm for bearings with a bore diameter of at least 20 mm
Core cross-section: 42.5 x 42.5 mm
Yoke storage: yes, integrated
Housing material: plastic
Error guide codes: yes; error messages in text form visible in the app

Scope of delivery
· 1x simatherm IH 045
· 1x Quick instruction guide
· 1x Temperature probe
· 1x Protective gloves
· 1x Power cord
· 1x Yoke 14x14 for bearings with a bore diameter from 20 mm
· 1x Yoke 28x28 for bearings with a bore diameter from 40 mm
· 1x Yoke 42.5x42.5 for bearings with a bore diameter from 60 mm

Optional:
· Second temperature probe needed to use two-sensor technology

Industry target groups and applications

Fabrication and assembly
· General mechanical engineering
· Gearbox construction (vehicles and industry)
· Pumps
· Hydraulic equipment
· Electric motor construction
· Conveyor and conveying systems

General operations maintenance
· Metal processing industry
· Paper and cardboard factories
· Textile industry
· Larger printing plants
· Food industry
· Building services
· Vehicles (buses, trucks, rail vehicles)
· Construction machinery
· Forklifts, storage equipment / lifting devices

Typical components which can be heated with the IH 045
· Rolling bearings
· Gears
· Gear rims
· Shrink rings
· Pistons
· Bushings
· Sleeves
· Clutch parts

Materials which can be heated well
· Structural steel
· Ball bearing steel
· Grey cast iron
· Cast steel

remote control via "world of maintanenace" app

simatherm Induction Heater IH 045 Heat the most common rolling bearings up to 45 kg World&#x27;s first controllable induction heater with an app The IH 045 is suitable for heating small and medium-sized workpieces up to 45 kg. Due to the external induction coil, the unit works extremely efficiently. The power can be adjusted in eight stages if required. · Connectivity with the &quot;simatec World of Maintenance&quot; app · Remote control · For rolling bearings weighing up to 45 kg · For workpieces with an inner diameter of 20 to 310 mm · Available for voltages of 100, 115 and 230 V · 8-stage power consumption combined with smaller yokes, allows smaller bearings to be heated safely and quickly with less energy · Extendable bearing support arms · Smallest and fastest device in its performance class · Smallest external induction coil · Supplied with three yokes as standard · Particularly compact design - including the yokes only 17 kg in weight · 3 year manufacturer warranty · Can heat a 28 kg bearing from 20 °C to 110 °C in 20 minutes, thus saving time and energy · Automatic demagnetization Technical data for simatherm IH 045 Designation: Heater for the most common rolling bearings Voltage V / Hz / power: - 100 V / 50 – 60 Hz / 1.5 kVA - 110 – 120 V / 50 – 60 Hz / 1.7 kVA - 220 – 240 V / 50 – 60 Hz / 2.1 kVA Workpiece Maximum weight: 45kg Bore diameter: From 20 mm inner diameter to 310 mm outer diameter Temperature control: - Range: 20 – 180°C - Magnetic probe: Type K - Accuracy (electronic): ± 3°C Time control: - Range: 0 – 60 minutes - Accuracy: ± 0.01 seconds Maximum temperature (approx.): 180 °C Thermometer mode: yes Two-sensor technology: yes Bearing temperature mode: yes Power level: 8 levels / 10-20-30-40-50-60-80-100% Automatic demagnetization / residual magnetism: yes / &lt; 2A/cm Suitable for heating sealed bearings: yes Suitable for heating pre-greased bearings: yes Suitability for precision bearings: yes Thermal overload protection: yes Maximum magnetic flux: 1.5 T Control panel: Keyboard wtih LED-display or remote control via app Size of the operating area (WxH): 114 x 160 mm Coil diameter: 89 mm Measurements (LxWxH): 320 x 267 x 293 mm Overall weight including yokes: 17 kg Number of standard yokes: 3 Standard yokes: - 42.5 x 42.5 x 219 mm for bearings with a bore diameter of at least 60 mm - 28 x 28 x 219 mm for bearings with a bore diameter of at least 40 mm - 14 x 14 x 219 mm for bearings with a bore diameter of at least 20 mm Core cross-section: 42.5 x 42.5 mm Yoke storage: yes, integrated Housing material: plastic Error guide codes: yes; error messages in text form visible in the app Scope of delivery · 1x simatherm IH 045 · 1x Quick instruction guide · 1x Temperature probe · 1x Protective gloves · 1x Power cord · 1x Yoke 14x14 for bearings with a bore diameter from 20 mm · 1x Yoke 28x28 for bearings with a bore diameter from 40 mm · 1x Yoke 42.5x42.5 for bearings with a bore diameter from 60 mm Optional: · Second temperature probe needed to use two-sensor technology Industry target groups and applications Fabrication and assembly · General mechanical engineering · Gearbox construction (vehicles and industry) · Pumps · Hydraulic equipment · Electric motor construction · Conveyor and conveying systems General operations maintenance · Metal processing industry · Paper and cardboard factories · Textile industry · Larger printing plants · Food industry · Building services · Vehicles (buses, trucks, rail vehicles) · Construction machinery · Forklifts, storage equipment / lifting devices Typical components which can be heated with the IH 045 · Rolling bearings · Gears · Gear rims · Shrink rings · Pistons · Bushings · Sleeves · Clutch parts Materials which can be heated well · Structural steel · Ball bearing steel · Grey cast iron · Cast steel*Lead time: 3 to 4 weeks upon order confirmation<figure class="md-block-image md-block-image-has-caption"><img src="https://storage.googleapis.com/eezee-product-images/Dvvje7J4uiAlXV1cxs9W1m.jpg" alt="remote control via "world of maintanenace" app" /><figcaption class="md-block-image-caption">remote control via &quot;world of maintanenace&quot; app</figcaption></figure><figure class="md-block-image"><img src="https://storage.googleapis.com/eezee-product-images/Y8nTQWUbh2CHAPfZUy10t4.jpg" alt="" /><figcaption class="md-block-image-caption"></figcaption></figure><figure class="md-block-image"><img src="https://storage.googleapis.com/eezee-product-images/8ahOmpNppatDGixSwvwT_N.jpg" alt="" /><figcaption class="md-block-image-caption"></figcaption></figure>

simatherm Induction Heater IH 045 
Heat the most common rolling bearings up to 45 kg 
 
World's first controllable induction heater with an app 
The IH 045 is suitable for heating small and medium-sized workpieces up to 45 kg. Due to the external induction coil, the unit works extremely efficiently. The power can be adjusted in eight stages if required. 
 
· Connectivity with the "simatec World of Maintenance" app 
· Remote control 
· For rolling bearings weighing up to 45 kg 
· For workpieces with an inner diameter of 20 to 310 mm 
· Available for voltages of 100, 115 and 230 V 
· 8-stage power consumption combined with smaller yokes, allows smaller bearings to be heated safely and quickly with less energy 
· Extendable bearing support arms 
· Smallest and fastest device in its performance class 
· Smallest external induction coil 
· Supplied with three yokes as standard 
· Particularly compact design - including the yokes only 17 kg in weight 
· 3 year manufacturer warranty 
· Can heat a 28 kg bearing from 20 °C to 110 °C in 20 minutes, thus saving time and energy 
· Automatic demagnetization 
 
<ins>Technical data for simatherm IH 045</ins> 
Designation: Heater for the most common rolling bearings 
Voltage V / Hz / power: 
- 100 V / 50 – 60 Hz / 1.5 kVA 
- 110 – 120 V / 50 – 60 Hz / 1.7 kVA 
- 220 – 240 V / 50 – 60 Hz / 2.1 kVA 
Workpiece Maximum weight: 45kg 
Bore diameter: From 20 mm inner diameter to 310 mm outer diameter 
Temperature control: 
- Range: 20 – 180°C 
- Magnetic probe: Type K 
- Accuracy (electronic): ± 3°C 
Time control: 
- Range: 0 – 60 minutes 
- Accuracy: ± 0.01 seconds 
Maximum temperature (approx.): 180 °C 
Thermometer mode: yes 
Two-sensor technology: yes 
Bearing temperature mode: yes 
Power level: 8 levels / 10-20-30-40-50-60-80-100% 
Automatic demagnetization / residual magnetism: yes / &lt; 2A/cm 
Suitable for heating sealed bearings: yes 
Suitable for heating pre-greased bearings: yes 
Suitability for precision bearings: yes 
Thermal overload protection: yes 
Maximum magnetic flux: 1.5 T 
Control panel: Keyboard wtih LED-display or remote control via app 
Size of the operating area (WxH): 114 x 160 mm 
Coil diameter: 89 mm 
Measurements (LxWxH): 320 x 267 x 293 mm 
Overall weight including yokes: 17 kg 
Number of standard yokes: 3 
Standard yokes: 
- 42.5 x 42.5 x 219 mm for bearings with a bore diameter of at least 60 mm 
- 28 x 28 x 219 mm for bearings with a bore diameter of at least 40 mm 
- 14 x 14 x 219 mm for bearings with a bore diameter of at least 20 mm 
Core cross-section: 42.5 x 42.5 mm 
Yoke storage: yes, integrated 
Housing material: plastic 
Error guide codes: yes; error messages in text form visible in the app 
 
Scope of delivery 
· 1x simatherm IH 045 
· 1x Quick instruction guide 
· 1x Temperature probe 
· 1x Protective gloves 
· 1x Power cord 
· 1x Yoke 14x14 for bearings with a bore diameter from 20 mm 
· 1x Yoke 28x28 for bearings with a bore diameter from 40 mm 
· 1x Yoke 42.5x42.5 for bearings with a bore diameter from 60 mm 
 
Optional: 
· Second temperature probe needed to use two-sensor technology 
 
Industry target groups and applications 
 
<ins>Fabrication and assembly</ins> 
· General mechanical engineering 
· Gearbox construction (vehicles and industry) 
· Pumps 
· Hydraulic equipment 
· Electric motor construction 
· Conveyor and conveying systems 
 
<ins>General operations maintenance</ins> 
· Metal processing industry 
· Paper and cardboard factories 
· Textile industry 
· Larger printing plants 
· Food industry 
· Building services 
· Vehicles (buses, trucks, rail vehicles) 
· Construction machinery 
· Forklifts, storage equipment / lifting devices 
 
<ins>Typical components which can be heated with the IH 045</ins> 
· Rolling bearings 
· Gears 
· Gear rims 
· Shrink rings 
· Pistons 
· Bushings 
· Sleeves 
· Clutch parts 
 
<ins>Materials which can be heated well</ins> 
· Structural steel 
· Ball bearing steel 
· Grey cast iron 
· Cast steel
*Lead time: 3 to 4 weeks upon order confirmation

 <div class="img-ctnr">
 <amp-img 
 on="tap:3i1pj"
 tabindex="0"
 role="button"
 class="contain"
 layout="fill"
 src="https://storage.googleapis.com/eezee-product-images/Dvvje7J4uiAlXV1cxs9W1m.jpg"
 ></amp-img>
 </div>
 
 <amp-image-lightbox 
 id="3i1pj" 
 layout="nodisplay"></amp-image-lightbox>

 

 <div class="img-ctnr">
 <amp-img 
 on="tap:5vtg4"
 tabindex="0"
 role="button"
 class="contain"
 layout="fill"
 src="https://storage.googleapis.com/eezee-product-images/Y8nTQWUbh2CHAPfZUy10t4.jpg"
 ></amp-img>
 </div>
 
 <amp-image-lightbox 
 id="5vtg4" 
 layout="nodisplay"></amp-image-lightbox>

 

 <div class="img-ctnr">
 <amp-img 
 on="tap:c57dp"
 tabindex="0"
 role="button"
 class="contain"
 layout="fill"
 src="https://storage.googleapis.com/eezee-product-images/8ahOmpNppatDGixSwvwT_N.jpg"
 ></amp-img>
 </div>
 
 <amp-image-lightbox 
 id="c57dp" 
 layout="nodisplay"></amp-image-lightbox>

Simatherm Bearing Induction Heater Ih 045 With Remote App Control (up to 45kg)

simatherm bearing induction heater ih 045 remote app control (up 45kg) pemanas induksi bantalan dengan kontrol aplikasi jarak jauh (hingga heaters aruhan kawalan (sehingga simatherm/西马瑟姆 轴承感应加热器 带远程应用程序控制（最多 45 公斤） 西马瑟姆

simatherm-bearing-induction-heater-ih-045-with-remote-app-control-up-to-45kg

simatherm Induction Heater IH 025 VOLCANO
The lightest portable induction heater in the world

The lightweight portable device with excellent performance
With a weight of only 3.5 kg, the simatherm IH 025 VOLCANO is the lightest portable induction heater in the world. The patented technology enables outstanding heating performance from an extremely light structure. You can use it to heat rolling bearings with an inner diameter as small as 20 mm up to on outer diameter of 160 mm and a weight of up to 10 kg.

· Portable, compact and very light (3.5 kg) - comes in a practical carrying case
· No support yoke required – simply place the workpiece on the device
· A bearing weighing 5 kg can be heated to 110°C in under four minutes
· Predictive Temperature Control (PTC) for automatic temperature monitoring
· Automatic demagnetization
· For workpieces with a minimum inner diameter of 20 mm up to a maximum outer diameter of 160 mm
· For workpieces weighing up to 10 kg
· Multi-stage power reduction for heating smaller parts
· Silent in operation
· 3 year manufacturer warranty

 
Technical data for simatherm IH 025 VOLCANO
Designation: Heaters for small workpieces
Voltage V / Hz / power:
- 220 – 240 V / 50 – 60 Hz / 1.5 kVA
- 110 – 120 V / 50 – 60 Hz / 1.15 kVA
- 100 V / 50 – 60 Hz / 1.0 kVA
Workpiece:
- Maximum weight: 10 kg
- Bore diameter: From 20 mm inner diameter to 160 mm outer diameter
Temperature control: 
- Range: 20 – 180°C (68–356°F)
- Magnetic probe: yes, type K
- Accuracy (electronic): ± 3°C to 110°C (± 6°F to 230°F)
Time control: Range 0 – 10 minutes, in steps of 0.1 minutes
Maximum temperature (approx.): 180°C (356°F)
Thermometer mode: yes
Bearing temperature mode: yes
Power reduction: 8 levels/ 10-20-30-40-50-60-80-100% (at each level, the performance can be additionally halved)
Automatic demagnetization / residual magnetism: yes / < 2A/cm
Suitable for heating sealed bearings: yes
Suitable for heating pre-greased bearings: yes
Suitability for precision bearings: yes
Error guide codes: yes
Thermal overload protection: yes
Control panel: Keyboard with LED-display
Dimensions (LxWxH): 340 x 250 x 64 mm (over the cone 121 mm)
Overall weight: 3.5 kg
Housing material: plastic
Cooling fan: yes


Scope of delivery 
· 1x simatherm IH 025 VOLCANO
· 1x User manual
· 1x Temperature probe
· 1x Carrying bag
· 1x Protective gloves
· 1x Power cord

Industry target groups and applications

Fabrication and assembly
· General mechanical engineering
· Gearbox construction (vehicles and industry)
· Pumps
· Hydraulic equipment
· Electric motor construction
· Conveyor and conveying systems

 General operations maintenance
· Metal processing industry
· Paper and cardboard factories
· Textile industry
· Larger printing plants
· Food industry
· Building services
· Vehicles (buses, trucks, rail vehicles)
· Construction machinery
· Forklifts, storage equipment / lifting devices

 Typical components which can be heated with the VOLCANO
· Rolling bearings
· Gears
· Gear rims
· Shrink rings
· Pistons
· Bushings
· Sleeves
· Clutch parts

 Materials which can be heated well
· Structural steel
· Ball bearing steel
· Grey cast iron
· Cast steel

simatherm Induction Heater IH 025 VOLCANO The lightest portable induction heater in the world The lightweight portable device with excellent performance With a weight of only 3.5 kg, the simatherm IH 025 VOLCANO is the lightest portable induction heater in the world. The patented technology enables outstanding heating performance from an extremely light structure. You can use it to heat rolling bearings with an inner diameter as small as 20 mm up to on outer diameter of 160 mm and a weight of up to 10 kg. · Portable, compact and very light (3.5 kg) - comes in a practical carrying case · No support yoke required – simply place the workpiece on the device · A bearing weighing 5 kg can be heated to 110°C in under four minutes · Predictive Temperature Control (PTC) for automatic temperature monitoring · Automatic demagnetization · For workpieces with a minimum inner diameter of 20 mm up to a maximum outer diameter of 160 mm · For workpieces weighing up to 10 kg · Multi-stage power reduction for heating smaller parts · Silent in operation · 3 year manufacturer warranty Technical data for simatherm IH 025 VOLCANO Designation: Heaters for small workpieces Voltage V / Hz / power: - 220 – 240 V / 50 – 60 Hz / 1.5 kVA - 110 – 120 V / 50 – 60 Hz / 1.15 kVA - 100 V / 50 – 60 Hz / 1.0 kVA Workpiece: - Maximum weight: 10 kg - Bore diameter: From 20 mm inner diameter to 160 mm outer diameter Temperature control: - Range: 20 – 180°C (68–356°F) - Magnetic probe: yes, type K - Accuracy (electronic): ± 3°C to 110°C (± 6°F to 230°F) Time control: Range 0 – 10 minutes, in steps of 0.1 minutes Maximum temperature (approx.): 180°C (356°F) Thermometer mode: yes Bearing temperature mode: yes Power reduction: 8 levels/ 10-20-30-40-50-60-80-100% (at each level, the performance can be additionally halved) Automatic demagnetization / residual magnetism: yes / &lt; 2A/cm Suitable for heating sealed bearings: yes Suitable for heating pre-greased bearings: yes Suitability for precision bearings: yes Error guide codes: yes Thermal overload protection: yes Control panel: Keyboard with LED-display Dimensions (LxWxH): 340 x 250 x 64 mm (over the cone 121 mm) Overall weight: 3.5 kg Housing material: plastic Cooling fan: yes Scope of delivery · 1x simatherm IH 025 VOLCANO · 1x User manual · 1x Temperature probe · 1x Carrying bag · 1x Protective gloves · 1x Power cord Industry target groups and applicationsFabrication and assembly · General mechanical engineering · Gearbox construction (vehicles and industry) · Pumps · Hydraulic equipment · Electric motor construction · Conveyor and conveying systems General operations maintenance · Metal processing industry · Paper and cardboard factories · Textile industry · Larger printing plants · Food industry · Building services · Vehicles (buses, trucks, rail vehicles) · Construction machinery · Forklifts, storage equipment / lifting devices Typical components which can be heated with the VOLCANO · Rolling bearings · Gears · Gear rims · Shrink rings · Pistons · Bushings · Sleeves · Clutch parts Materials which can be heated well · Structural steel · Ball bearing steel · Grey cast iron · Cast steel*Lead time: 3 to 4 weeks upon order confirmation<figure class="md-block-image"><img src="https://storage.googleapis.com/eezee-product-images/nOQYUt_5XuihrDsz0BwHqq.jpg" alt="" /><figcaption class="md-block-image-caption"></figcaption></figure><figure class="md-block-image"><img src="https://storage.googleapis.com/eezee-product-images/hxwrTmZSokjDwyNfRjEKn2.jpg" alt="" /><figcaption class="md-block-image-caption"></figcaption></figure>

simatherm Induction Heater IH 025 VOLCANO 
The lightest portable induction heater in the world 
 
The lightweight portable device with excellent performance 
With a weight of only 3.5 kg, the simatherm IH 025 VOLCANO is the lightest portable induction heater in the world. The patented technology enables outstanding heating performance from an extremely light structure. You can use it to heat rolling bearings with an inner diameter as small as 20 mm up to on outer diameter of 160 mm and a weight of up to 10 kg. 
 
· Portable, compact and very light (3.5 kg) - comes in a practical carrying case 
· No support yoke required – simply place the workpiece on the device 
· A bearing weighing 5 kg can be heated to 110°C in under four minutes 
· Predictive Temperature Control (PTC) for automatic temperature monitoring 
· Automatic demagnetization 
· For workpieces with a minimum inner diameter of 20 mm up to a maximum outer diameter of 160 mm 
· For workpieces weighing up to 10 kg 
· Multi-stage power reduction for heating smaller parts 
· Silent in operation 
· 3 year manufacturer warranty 
 
 
<ins>Technical data for simatherm IH 025 VOLCANO</ins> 
Designation: Heaters for small workpieces 
Voltage V / Hz / power: 
- 220 – 240 V / 50 – 60 Hz / 1.5 kVA 
- 110 – 120 V / 50 – 60 Hz / 1.15 kVA 
- 100 V / 50 – 60 Hz / 1.0 kVA 
Workpiece: 
- Maximum weight: 10 kg 
- Bore diameter: From 20 mm inner diameter to 160 mm outer diameter 
Temperature control: 
- Range: 20 – 180°C (68–356°F) 
- Magnetic probe: yes, type K 
- Accuracy (electronic): ± 3°C to 110°C (± 6°F to 230°F) 
Time control: Range 0 – 10 minutes, in steps of 0.1 minutes 
Maximum temperature (approx.): 180°C (356°F) 
Thermometer mode: yes 
Bearing temperature mode: yes 
Power reduction: 8 levels/ 10-20-30-40-50-60-80-100% (at each level, the performance can be additionally halved) 
Automatic demagnetization / residual magnetism: yes / &lt; 2A/cm 
Suitable for heating sealed bearings: yes 
Suitable for heating pre-greased bearings: yes 
Suitability for precision bearings: yes 
Error guide codes: yes 
Thermal overload protection: yes 
Control panel: Keyboard with LED-display 
Dimensions (LxWxH): 340 x 250 x 64 mm (over the cone 121 mm) 
Overall weight: 3.5 kg 
Housing material: plastic 
Cooling fan: yes 
 
 
Scope of delivery 
· 1x simatherm IH 025 VOLCANO 
· 1x User manual 
· 1x Temperature probe 
· 1x Carrying bag 
· 1x Protective gloves 
· 1x Power cord 
 
Industry target groups and applications
<ins>Fabrication and assembly</ins> 
· General mechanical engineering 
· Gearbox construction (vehicles and industry) 
· Pumps 
· Hydraulic equipment 
· Electric motor construction 
· Conveyor and conveying systems 
 
 <ins>General operations maintenance</ins> 
· Metal processing industry 
· Paper and cardboard factories 
· Textile industry 
· Larger printing plants 
· Food industry 
· Building services 
· Vehicles (buses, trucks, rail vehicles) 
· Construction machinery 
· Forklifts, storage equipment / lifting devices 
 
 <ins>Typical components which can be heated with the VOLCANO</ins> 
· Rolling bearings 
· Gears 
· Gear rims 
· Shrink rings 
· Pistons 
· Bushings 
· Sleeves 
· Clutch parts 
 
 <ins>Materials which can be heated well</ins> 
· Structural steel 
· Ball bearing steel 
· Grey cast iron 
· Cast steel
*Lead time: 3 to 4 weeks upon order confirmation

 <div class="img-ctnr">
 <amp-img 
 on="tap:dk230"
 tabindex="0"
 role="button"
 class="contain"
 layout="fill"
 src="https://storage.googleapis.com/eezee-product-images/nOQYUt_5XuihrDsz0BwHqq.jpg"
 ></amp-img>
 </div>
 
 <amp-image-lightbox 
 id="dk230" 
 layout="nodisplay"></amp-image-lightbox>

 

 <div class="img-ctnr">
 <amp-img 
 on="tap:9vklc"
 tabindex="0"
 role="button"
 class="contain"
 layout="fill"
 src="https://storage.googleapis.com/eezee-product-images/hxwrTmZSokjDwyNfRjEKn2.jpg"
 ></amp-img>
 </div>
 
 <amp-image-lightbox 
 id="9vklc" 
 layout="nodisplay"></amp-image-lightbox>

Simatherm Portable Bearing Induction Heater Volcano (up to 10kg)

simatherm portable bearing induction heater volcano (up 10kg) pemanas induksi bantalan portabel gunung berapi (hingga heaters (sehingga simatherm/西马瑟姆 便携式轴承感应加热器火山（最多 10 公斤） 西马瑟姆

simatherm-portable-bearing-induction-heater-volcano-up-to-10kg

- Single temperature measurement, incl 1 magnetic temperature probe

Smart electronics ensure optimum heating and efficient use of power

 Temperature setting upto 240°C / 464°F

 Automatic demagnetization, better than 2A/cm

 Acoustic signal at the end of each heating cycle

 3 years warranty on the electronic unit

- Portable induction heater- Ideal for use in workshops or on-site- Single temperature measurement, incl 1 magnetic temperature probe- Digital display- Including 3 yokes: 7, 14, 40x50 mmSmart electronics ensure optimum heating and efficient use of power Temperature setting upto 240°C / 464°F Automatic demagnetization, better than 2A/cm Keyboard for easy operation Acoustic signal at the end of each heating cycle Temperature hold Time setting in minutes/seconds Incl. service kit and CE-manual 3 years warranty on the electronic unit Including packing material

- Portable induction heater
- Ideal for use in workshops or on-site
- Single temperature measurement, incl 1 magnetic temperature probe
- Digital display
- Including 3 yokes: 7, 14, 40x50 mm
Smart electronics ensure optimum heating and efficient use of power
 Temperature setting upto 240°C / 464°F
 Automatic demagnetization, better than 2A/cm
 Keyboard for easy operation
 Acoustic signal at the end of each heating cycle
 Temperature hold
 Time setting in minutes/seconds
 Incl. service kit and CE-manual
 3 years warranty on the electronic unit
 Including packing material

BETEX BLF-201 Bearing Heater

Tan Huang Chun

Betex BLF-201 Bearing Heater - up Till 50kg

betex blf-201 bearing heater till 50kg hingga induction heaters pemanas galas sehingga 轴承加热器 最大 贝特克斯

betex-blf-201-bearing-heater-up-till-50kg

Precision heating, the ultimate tool for flameless heating!

The BETEX iDuctor is a professional type of induction hand tool. All sorts of metal parts, such as transmission parts, bearing housings, bolts, nuts, pipes and small surfaces can be heated locally. Thanks to the precise heating, the surroundings retain a normal temperature. As a result, stuck parts will expand and loosen. Also suitable for removing decals and coating layers.

The only induction hand tool on the market with an output of no less than 2300 Watts. Using the BETEX iDuctor 2 you can heat larger and heavier workpieces even faster. No open flames. Considerable time savings.

Supplied in handy PE case with a 2-mtr flexible inductor and heat-resistant gloves (250°C).

• Set of 9 inductors, consisting of 8 induction coils with min/max inner diameter: 18-52 mm (bolt sizes M8-M30) and 1 U-inductor, inner diameter 160 mm; easy to exchange (Refer to P/N: 231204)

• Flexible inductor for BETEX iDuctor 1: 1.1 meters

• Flexible inductor for BETEX iDuctor 2: 2.5, 3, 3.5 meters

• ID pad for localised heating of surfaces, removal of decals, adhesives and coatings

• Heat-resistant gloves up to 300°C / 572 °F Advantages

• Suitable for difficult to access locations

BETEX iDuctor 2 - 2300WPrecision heating, the ultimate tool for flameless heating!The BETEX iDuctor is a professional type of induction hand tool. All sorts of metal parts, such as transmission parts, bearing housings, bolts, nuts, pipes and small surfaces can be heated locally. Thanks to the precise heating, the surroundings retain a normal temperature. As a result, stuck parts will expand and loosen. Also suitable for removing decals and coating layers. The only induction hand tool on the market with an output of no less than 2300 Watts. Using the BETEX iDuctor 2 you can heat larger and heavier workpieces even faster. No open flames. Considerable time savings.Supplied in handy PE case with a 2-mtr flexible inductor and heat-resistant gloves (250°C).Optional• Set of 9 inductors, consisting of 8 induction coils with min/max inner diameter: 18-52 mm (bolt sizes M8-M30) and 1 U-inductor, inner diameter 160 mm; easy to exchange (Refer to P/N: 231204)• Flexible inductor for BETEX iDuctor 1: 1.1 meters• Flexible inductor for BETEX iDuctor 2: 2.5, 3, 3.5 meters• ID pad for localised heating of surfaces, removal of decals, adhesives and coatings• Heat-resistant gloves up to 300°C / 572 °F AdvantagesAdvantages• Ergonomic design• Time savings• Cost savings• Convenient• Can be operated with one hand• No open flames• Safe to use• Versatile• Suitable for difficult to access locations• Maintenance free

<ins>BETEX iDuctor 2 - 2300W</ins>
<ins>Precision heating, the ultimate tool for flameless heating!</ins>
The BETEX iDuctor is a professional type of induction hand tool. All sorts of metal parts, such as transmission parts, bearing housings, bolts, nuts, pipes and small surfaces can be heated locally. Thanks to the precise heating, the surroundings retain a normal temperature. As a result, stuck parts will expand and loosen. Also suitable for removing decals and coating layers.

The only induction hand tool on the market with an output of no less than 2300 Watts. Using the BETEX iDuctor 2 you can heat larger and heavier workpieces even faster. No open flames. Considerable time savings.
Supplied in handy PE case with a 2-mtr flexible inductor and heat-resistant gloves (250°C).
<ins>Optional</ins>
• Set of 9 inductors, consisting of 8 induction coils with min/max inner diameter: 18-52 mm (bolt sizes M8-M30) and 1 U-inductor, inner diameter 160 mm; easy to exchange (Refer to P/N: 231204)
• Flexible inductor for BETEX iDuctor 1: 1.1 meters
• Flexible inductor for BETEX iDuctor 2: 2.5, 3, 3.5 meters
• ID pad for localised heating of surfaces, removal of decals, adhesives and coatings
• Heat-resistant gloves up to 300°C / 572 °F Advantages
<ins>Advantages</ins>
• Ergonomic design
• Time savings
• Cost savings
• Convenient
• Can be operated with one hand
• No open flames
• Safe to use
• Versatile
• Suitable for difficult to access locations
• Maintenance free

BETEX iDuctor 2

Betex Iductor 2 - 2300W

betex iductor 2300w iduktor induction heaters betex/贝特克斯 电感器 贝特克斯

betex-iductor-2-2300w

BETEX BLF 202 low frequency induction heaters 120/230V - 50/60Hz - BASIC

· Heating can be done in time or temperature mode

· Smart electonics ensure optimal heating and efficient use of power

· Robuste design for working in industrial environments

· Temperature setting upto 240°C / 464°F

· Automatic demagnetization, better than 2A/cm

· Acoustic signal at the end of each heating cycle

· 3 years warranty on the electronic unit

BETEX BLF 202 low frequency induction heaters 120/230V - 50/60Hz - BASICseries· Heating can be done in time or temperature mode· Smart electonics ensure optimal heating and efficient use of power· Robuste design for working in industrial environments· Controlled heating method· Reduced energy consumption· Including 2 yokes, 20, 50 mm· Temperature setting upto 240°C / 464°F· Incl. 1 magnetic temperature probe· Automatic demagnetization, better than 2A/cm· Keyboard for easy operation· Acoustic signal at the end of each heating cycle· Temperature hold· Time setting in minutes/seconds· Incl. service kit and CE-manual· 3 years warranty on the electronic unit· Including packing material

BETEX BLF 202 low frequency induction heaters 120/230V - 50/60Hz - BASIC
series
· Heating can be done in time or temperature mode
· Smart electonics ensure optimal heating and efficient use of power
· Robuste design for working in industrial environments
· Controlled heating method
· Reduced energy consumption
· Including 2 yokes, 20, 50 mm
· Temperature setting upto 240°C / 464°F
· Incl. 1 magnetic temperature probe
· Automatic demagnetization, better than 2A/cm
· Keyboard for easy operation
· Acoustic signal at the end of each heating cycle
· Temperature hold
· Time setting in minutes/seconds
· Incl. service kit and CE-manual
· 3 years warranty on the electronic unit
· Including packing material

BETEX BLF-202 Bearing Heater

Betex BLF-202 Bearing Heater - up Till 100kg

betex blf-202 bearing heater till 100kg hingga induction heaters pemanas galas sehingga 轴承加热器 最大 贝特克斯

betex-blf-202-bearing-heater-up-till-100kg

BETEX BLF 204 low frequency induction heaters 400V - 50/60Hz - BASIC

BETEX BLF 204 low frequency induction heaters 400V - 50/60Hz - BASICseries· Heating can be done in time or temperature mode· Smart electonics ensure optimal heating and efficient use of power· Robuste design for working in industrial environments· Controlled heating method· Reduced energy consumption· Including 2 yokes, 30, 70 mm· Temperature setting upto 240°C / 464°F· Incl. 1 magnetic temperature probe· Automatic demagnetization, better than 2A/cm· Keyboard for easy operation· Acoustic signal at the end of each heating cycle· Temperature hold· Time setting in minutes/seconds· Incl. service kit and CE-manual· 3 years warranty on the electronic unit· Including packing material

BETEX BLF 204 low frequency induction heaters 400V - 50/60Hz - BASIC
series
· Heating can be done in time or temperature mode
· Smart electonics ensure optimal heating and efficient use of power
· Robuste design for working in industrial environments
· Controlled heating method
· Reduced energy consumption
· Including 2 yokes, 30, 70 mm
· Temperature setting upto 240°C / 464°F
· Incl. 1 magnetic temperature probe
· Automatic demagnetization, better than 2A/cm
· Keyboard for easy operation
· Acoustic signal at the end of each heating cycle
· Temperature hold
· Time setting in minutes/seconds
· Incl. service kit and CE-manual
· 3 years warranty on the electronic unit
· Including packing material

BETEX BLF-204 Bearing Heater

Betex BLF-204 Bearing Heater - up Till 200kg

betex blf-204 bearing heater till 200kg pemanas bantalan hingga induction heaters galas sehingga betex/贝特克斯 轴承加热器 最高承重 200 公斤 贝特克斯

betex-blf-204-bearing-heater-up-till-200kg

RS PRO Datasheet

User Manual - RS PRO Industrial Fan Heater

Siemens

STANLEY

DEUTSCH

Facom

RAPID

SCHNEIDER ELECTRIC

ECLIPSE TOOLS

Screw

O Ring

Plugs & Connector 

Surface Mount Resistors

Bolts

Panel Mount Indicators 

Button Switch

Electrical Wire 

Junction & Enclosure Box

Aluminium Capacitors

RS Components ETH SG

Rs Pro 1746568 European Plug - 2kW Fan Industrial Heater, Floor Mounted, Type C

rs pro 1746568 european plug 2kw fan industrial heater, floor mounted, type steker eropa pemanas industri kipas 2kw, terpasang di lantai, tipe heaters radiators palam eropah dipasang jenis 欧洲插头 风扇工业加热器，落地式，c rs专业版

rs-pro-1746568-european-plug-2kw-fan-industrial-heater-floor-mounted-type-c

Rs Pro 1962388 2kW Panel Heater, Wall Mounted

rs pro 1962388 2kw panel heater, wall mounted pemanas 2kw, terpasang di dinding heaters radiators dipasang 面板加热器，壁挂式 rs专业版

rs-pro-1962388-2kw-panel-heater-wall-mounted

Rs Pro 1746570 European Plug - 3kW Fan Industrial Heater, Floor Mounted, Type C

rs pro 1746570 european plug 3kw fan industrial heater, floor mounted, type steker eropa pemanas industri kipas 3kw, terpasang di lantai, tipe heaters radiators palam eropah dipasang jenis 欧洲插头 风扇工业加热器，落地式，c rs专业版

rs-pro-1746570-european-plug-3kw-fan-industrial-heater-floor-mounted-type-c

Instruction Sheet

Rs Pro 1358428 135W Convection Tubular Heater, Wall Mounted, Unterminated Mains Lead

rs pro 1358428 135w convection tubular heater, wall mounted, unterminated mains lead pemanas konveksi 135w, terpasang di dinding, kabel listrik tidak terputus heaters radiators tiub perolakan dipasang plumbum sesalur ditamatkan 对流管式加热器，壁挂式，无端接电源线 rs专业版

rs-pro-1358428-135w-convection-tubular-heater-wall-mounted-unterminated-mains-lead

Technical Drawing

Rs Pro 1746571 9kW Fan Industrial Heater, Floor Mounted, 415 V BS4343/IEC60309

rs pro 1746571 9kw fan industrial heater, floor mounted, 415 bs4343/iec60309 pemanas industri kipas 9kw, terpasang di lantai, heaters radiators dipasang 风扇工业加热器，落地式，415 rs专业版