Adhesive

adhesive

Epoxy

epoxy

Ppg 620 Sigmacover Surface Tolerant Hb Epoxy (Light Grey, Grey) Pack Size 20 Litres

Two component amine cured high solids epoxy coating.

• Specialized coating for use under SIGMAGLIDE fouling release system
• Excellent impact resistance
• Excellent water resistance

<h3 class="md-block-header-three">Ppg 620 Sigmacover Surface Tolerant Hb Epoxy (Light Grey, Grey) Pack Size 20 Litres</h3>DescriptionTwo component amine cured high solids epoxy coating.Principal Characteristics• Specialized coating for use under SIGMAGLIDE fouling release system • Excellent impact resistance • Excellent water resistance

<h3>Ppg 620 Sigmacover Surface Tolerant Hb Epoxy (Light Grey, Grey) Pack Size 20 Litres</h3>
Description
Two component amine cured high solids epoxy coating.
Principal Characteristics
• Specialized coating for use under SIGMAGLIDE fouling release system 
• Excellent impact resistance 
• Excellent water resistance

eezee

Ppg 620 Sigmacover Surface Tolerant Hb Epoxy (light Grey, Grey) Pack Size 20 Litres

ppg 620 sigmacover surface tolerant hb epoxy (light grey, grey) pack size 20 litres tahan permukaan (abu-abu muda, abu-abu) ukuran kemasan liter epoksi (kelabu kelabu) saiz pek 表面耐受 环氧树脂（浅灰色，灰色）包装规格 环氧胶

ppg-620-sigmacover-surface-tolerant-hb-epoxy-light-grey-grey-pack-size-20-litres

Light Grey

Grey

Colour

Ppg 850 Sigmacover Hb Gf Epoxy ( Black, Grey or Custom Colour) Pack Size 20 Litres

• Solvent free sprayable epoxy cladding
• Seamless water impermeable layer with excellent anticorrosive properties
• Suitable for the protection of steel and concrete
• Excellent resistance against impact and wear
• Excellent adhesion under dry and wet exposure conditions
• Resistant to water and splash of mild chemicals
• Can be exposed to water within 30 minutes after application
• Texture of surface is rough
• Suitable for decks exposed to heavy impact and abrasion

<h3 class="md-block-header-three">Ppg 850 Sigmacover Hb Gf Epoxy ( Black, Grey or Custom Colour) Pack Size 20 Litres</h3>Where to use • Solvent free sprayable epoxy cladding • Seamless water impermeable layer with excellent anticorrosive properties • Suitable for the protection of steel and concrete • Excellent resistance against impact and wear • Excellent adhesion under dry and wet exposure conditions • Resistant to water and splash of mild chemicals • Can be exposed to water within 30 minutes after application • Texture of surface is rough • Suitable for decks exposed to heavy impact and abrasion

<h3>Ppg 850 Sigmacover Hb Gf Epoxy ( Black, Grey or Custom Colour) Pack Size 20 Litres</h3>
Where to use 
• Solvent free sprayable epoxy cladding 
• Seamless water impermeable layer with excellent anticorrosive properties 
• Suitable for the protection of steel and concrete 
• Excellent resistance against impact and wear 
• Excellent adhesion under dry and wet exposure conditions 
• Resistant to water and splash of mild chemicals 
• Can be exposed to water within 30 minutes after application 
• Texture of surface is rough 
• Suitable for decks exposed to heavy impact and abrasion

ppg 850 sigmacover hb gf epoxy black, grey custom colour) pack size 20 litres (hitam, abu-abu atau warna kustom) ukuran kemasan liter epoksi hitam, kelabu tersuai) saiz pek 环氧树脂（黑色、灰色或定制颜色）包装规格 环氧胶

ppg-850-sigmacover-hb-gf-epoxy-black-grey-or-custom-colour-pack-size-20-litres

Black

Custom Colour

Ppg 880 GF Sigmashield Hb Gf Epoxy ( Black, Grey or Custom Colour) Pack Size 20 Litres

PPG Sigmashield 880 GF - Formerly Amerlock 880GF is a two component, surface tolerant high solid glass flake epoxy coating primarily designed for use in offshore splash zone maintenance.

Sigmashield 880GF is designed for use in heavy duty and corrosive environments due to it's excellent corrosion, impact, abrasion and sea water resistance. Providing long term protection in a single coat application, this product continued to cure when immersed in water. Suitable for petrochemical, offshore and power plant use.

Blast clean steel to ISO-Sa2 or ISO-SA2 1/2. Substrate temperature should be at least 3°C above dew point. Apply using airless spray, conventional spray or brush/roller for touch up or spot repair. 

Tintable: Yes (bespoke tints are non-refundable / non-exchangeable)

Suitable Substrates: Steel – primarily designed for offshore splash zone maintenance

Application Methods: Brush, Roller, Airless Spray, Air Spray

Theoretical Coverage: 4.3 m²/L at 200 microns

Dry Film Thickness (DFT): 200 – 1000 microns (8.0 – 40.0 mils), depending on system

Overcoatable: Minimum 3.5 hours, maximum 14 days at 20°C

Cleaner / Thinner: Thin with Thinner 91-92, Clean with Thinner 90-53

Shelf Life: Minimum 24 months (cool, dry storage)

<h3 class="md-block-header-three">Ppg 880 GF Sigmashield Hb Gf Epoxy ( Black, Grey or Custom Colour) Pack Size 20 Litres</h3><ul class="md-block-unordered-list-item"><li>PPG Sigmashield 880 GF - Formerly Amerlock 880GF is a two component, surface tolerant high solid glass flake epoxy coating primarily designed for use in offshore splash zone maintenance.</li><li>Best Uses</li></ul>Sigmashield 880GF is designed for use in heavy duty and corrosive environments due to it&#x27;s excellent corrosion, impact, abrasion and sea water resistance. Providing long term protection in a single coat application, this product continued to cure when immersed in water. Suitable for petrochemical, offshore and power plant use.<ul class="md-block-unordered-list-item"><li>Application</li></ul>Blast clean steel to ISO-Sa2 or ISO-SA2 1/2. Substrate temperature should be at least 3°C above dew point. Apply using airless spray, conventional spray or brush/roller for touch up or spot repair. Approvals<ul class="md-block-unordered-list-item"><li>Norsok M-501 System 4 (Pre-qualified) </li><li>Norsok M-501 System 7A (Pre-qualified)</li></ul>Technical Information<ul class="md-block-unordered-list-item"><li>Components: Two components</li><li>Type: Epoxy coating</li><li>Finish: Gloss</li><li>Stock Colours: Black, Grey</li><li>Tintable: Yes (bespoke tints are non-refundable / non-exchangeable)</li><li>VOC Content: 207 g/L</li><li>Volume Solids: 85% ± 2%</li><li>Suitable Substrates: Steel – primarily designed for offshore splash zone maintenance</li><li>Application Methods: Brush, Roller, Airless Spray, Air Spray</li><li>Theoretical Coverage: 4.3 m²/L at 200 microns</li><li>Dry Film Thickness (DFT): 200 – 1000 microns (8.0 – 40.0 mils), depending on system</li><li>Wet Film Thickness (WFT): –</li><li>Induction Time: None</li><li>Pot Life: 2 hours at 20°C</li><li>Touch Dry: 3 hours at 20°C</li><li>Overcoatable: Minimum 3.5 hours, maximum 14 days at 20°C</li><li>Fully Cured: 7 days at 20°C</li><li>Cleaner / Thinner: Thin with Thinner 91-92, Clean with Thinner 90-53</li><li>Shelf Life: Minimum 24 months (cool, dry storage)</li><li>Packaging: 20 L</li></ul>

<h3>Ppg 880 GF Sigmashield Hb Gf Epoxy ( Black, Grey or Custom Colour) Pack Size 20 Litres</h3>
<ul>
<li>PPG Sigmashield 880 GF - Formerly Amerlock 880GF is a two component, surface tolerant high solid glass flake epoxy coating primarily designed for use in offshore splash zone maintenance.</li>
<li>Best Uses</li>
</ul>
Sigmashield 880GF is designed for use in heavy duty and corrosive environments due to it's excellent corrosion, impact, abrasion and sea water resistance. Providing long term protection in a single coat application, this product continued to cure when immersed in water. Suitable for petrochemical, offshore and power plant use.
<ul>
<li>Application</li>
</ul>
Blast clean steel to ISO-Sa2 or ISO-SA2 1/2. Substrate temperature should be at least 3°C above dew point. Apply using airless spray, conventional spray or brush/roller for touch up or spot repair.&nbsp;
Approvals
<ul>
<li>Norsok M-501 System 4 (Pre-qualified)&nbsp;</li>
<li>Norsok M-501 System 7A (Pre-qualified)</li>
</ul>
Technical Information
<ul>
<li>Components: Two components</li>
<li>Type: Epoxy coating</li>
<li>Finish: Gloss</li>
<li>Stock Colours: Black, Grey</li>
<li>Tintable: Yes (bespoke tints are non-refundable / non-exchangeable)</li>
<li>VOC Content: 207 g/L</li>
<li>Volume Solids: 85% ± 2%</li>
<li>Suitable Substrates: Steel – primarily designed for offshore splash zone maintenance</li>
<li>Application Methods: Brush, Roller, Airless Spray, Air Spray</li>
<li>Theoretical Coverage: 4.3 m²/L at 200 microns</li>
<li>Dry Film Thickness (DFT): 200 – 1000 microns (8.0 – 40.0 mils), depending on system</li>
<li>Wet Film Thickness (WFT): –</li>
<li>Induction Time: None</li>
<li>Pot Life: 2 hours at 20°C</li>
<li>Touch Dry: 3 hours at 20°C</li>
<li>Overcoatable: Minimum 3.5 hours, maximum 14 days at 20°C</li>
<li>Fully Cured: 7 days at 20°C</li>
<li>Cleaner / Thinner: Thin with Thinner 91-92, Clean with Thinner 90-53</li>
<li>Shelf Life: Minimum 24 months (cool, dry storage)</li>
<li>Packaging: 20 L</li>
</ul>

Product Datasheet

Safety Datasheet

ppg 880 gf sigmashield hb epoxy black, grey custom colour) pack size 20 litres (hitam, abu-abu atau warna kustom) ukuran kemasan liter epoksi hitam, kelabu tersuai) saiz pek 环氧树脂（黑色、灰色或定制颜色）包装规格 环氧胶

ppg-880-gf-sigmashield-hb-gf-epoxy-black-grey-or-custom-colour-pack-size-20-litres

Color

Ppg 1090 Sigmashield High Build Phenolic Epoxy (Grey) Pack Size 15,71 Litres

PPG SigmaShield 1090 is a two component, flint reinforced, solvent free, polyamine cured, epoxy compound, suitable for the protection of both steel and concrete. This product provides protection against water, mild chemicals, impact, and corrosion.

PPG SigmaShield 1090 is a product ideal for use in the marine environment that can be exposed to water just 30 minutes after application. 1090 provides a water permeable layer that allows trapped moisture to be released all the while allowing the surface to breathe, making it highly suited for use on decks regularly exposed to water.

PPG SigmaShield 1090 is a heavy substance that can be applied using a flat trowel or using spray application, however the product must be transported from the container with mixed material to the spray gun. After 6-8 hours the surface is dry to touch and can be recoated after a minimum of 6 hours.

Sigma SigmaShield 1090 is suitable for use on dock-side appliances and surfaces and is highly resistance to abrasion and impact. The marine environment is constantly exposed to varying conditions and 1090 offers the utmost protection and adhesion in dry or wet conditions, warm or cold. SigmaShield 1090 should primarily be used on steel and concrete substrates situated in the marine environment.

<h3 class="md-block-header-three">Ppg 1090 Sigmashield High Build Phenolic Epoxy (Grey) Pack Size 15,71 Litres</h3>PPG SigmaShield 1090 is a two component, flint reinforced, solvent free, polyamine cured, epoxy compound, suitable for the protection of both steel and concrete. This product provides protection against water, mild chemicals, impact, and corrosion.<ul class="md-block-unordered-list-item"><li>Best Uses</li></ul>PPG SigmaShield 1090 is a product ideal for use in the marine environment that can be exposed to water just 30 minutes after application. 1090 provides a water permeable layer that allows trapped moisture to be released all the while allowing the surface to breathe, making it highly suited for use on decks regularly exposed to water.<ul class="md-block-unordered-list-item"><li>Application</li></ul>PPG SigmaShield 1090 is a heavy substance that can be applied using a flat trowel or using spray application, however the product must be transported from the container with mixed material to the spray gun. After 6-8 hours the surface is dry to touch and can be recoated after a minimum of 6 hours.<ul class="md-block-unordered-list-item"><li>Surface and Environment</li></ul>Sigma SigmaShield 1090 is suitable for use on dock-side appliances and surfaces and is highly resistance to abrasion and impact. The marine environment is constantly exposed to varying conditions and 1090 offers the utmost protection and adhesion in dry or wet conditions, warm or cold. SigmaShield 1090 should primarily be used on steel and concrete substrates situated in the marine environment.

<h3>Ppg 1090 Sigmashield High Build Phenolic Epoxy (Grey) Pack Size 15,71 Litres</h3>
PPG SigmaShield 1090 is a two component, flint reinforced, solvent free, polyamine cured, epoxy compound, suitable for the protection of both steel and concrete. This product provides protection against water, mild chemicals, impact, and corrosion.
<ul>
<li>Best Uses</li>
</ul>
PPG SigmaShield 1090 is a product ideal for use in the marine environment that can be exposed to water just 30 minutes after application. 1090 provides a water permeable layer that allows trapped moisture to be released all the while allowing the surface to breathe, making it highly suited for use on decks regularly exposed to water.
<ul>
<li>Application</li>
</ul>
PPG SigmaShield 1090 is a heavy substance that can be applied using a flat trowel or using spray application, however the product must be transported from the container with mixed material to the spray gun. After 6-8 hours the surface is dry to touch and can be recoated after a minimum of 6 hours.
<ul>
<li>Surface and Environment</li>
</ul>
Sigma SigmaShield 1090 is suitable for use on dock-side appliances and surfaces and is highly resistance to abrasion and impact. The marine environment is constantly exposed to varying conditions and 1090 offers the utmost protection and adhesion in dry or wet conditions, warm or cold. SigmaShield 1090 should primarily be used on steel and concrete substrates situated in the marine environment.

Ppg 1090 Sigmashield High Build Phenolic Epoxy (grey) Pack Size 15,71 Litres

ppg 1090 sigmashield high build phenolic epoxy (grey) pack size 15,71 litres (abu-abu) ukuran kemasan liter epoksi (kelabu) saiz pek 15.71 高强度酚醛环氧树脂（灰色）包装规格：15.71 环氧胶

ppg-1090-sigmashield-high-build-phenolic-epoxy-grey-pack-size-15-71-litres

Ppg 410 MIO Sigmacover Epoxy Intermediate ( Light Grey) Pack Size 20 Litres

PPG SigmaCover 410 is a two component, high solids, high build, polyamide cured epoxy coating designed for general purpose protection to steel and concrete structures exposed to atmospheric land or marine conditions.

PPG SigmaCover 410 is best used to provide durability to a variety of different substrates and can be recoated with various two component and conventional coatings even after long weathering periods.

PPG SigmaCover 410 is easy to apply using airless spray for a theoretical coverage rate of 10.6m2 per litre. Once you have applied the product, it will be touch dry in just 3 hours ready for an overcoating after 10 hours.

PPG SigmaCover 410 is suitable for use in coastal and industrial environments and can be used on structural steel and concrete appliances to produce a dark grey, light grey or off white finish.

<h3 class="md-block-header-three">Ppg 410 MIO Sigmacover Epoxy Intermediate ( Light Grey) Pack Size 20 Litres</h3>PPG SigmaCover 410 is a two component, high solids, high build, polyamide cured epoxy coating designed for general purpose protection to steel and concrete structures exposed to atmospheric land or marine conditions.<ul class="md-block-unordered-list-item"><li>Best Uses</li></ul>PPG SigmaCover 410 is best used to provide durability to a variety of different substrates and can be recoated with various two component and conventional coatings even after long weathering periods.<ul class="md-block-unordered-list-item"><li>Application</li></ul>PPG SigmaCover 410 is easy to apply using airless spray for a theoretical coverage rate of 10.6m2 per litre. Once you have applied the product, it will be touch dry in just 3 hours ready for an overcoating after 10 hours.<ul class="md-block-unordered-list-item"><li>Surface and Environment</li></ul>PPG SigmaCover 410 is suitable for use in coastal and industrial environments and can be used on structural steel and concrete appliances to produce a dark grey, light grey or off white finish.

<h3>Ppg 410 MIO Sigmacover Epoxy Intermediate ( Light Grey) Pack Size 20 Litres</h3>
PPG SigmaCover 410 is a two component, high solids, high build, polyamide cured epoxy coating designed for general purpose protection to steel and concrete structures exposed to atmospheric land or marine conditions.
<ul>
<li>Best Uses</li>
</ul>
PPG SigmaCover 410 is best used to provide durability to a variety of different substrates and can be recoated with various two component and conventional coatings even after long weathering periods.
<ul>
<li>Application</li>
</ul>
PPG SigmaCover 410 is easy to apply using airless spray for a theoretical coverage rate of 10.6m2 per litre. Once you have applied the product, it will be touch dry in just 3 hours ready for an overcoating after 10 hours.
<ul>
<li>Surface and Environment</li>
</ul>
PPG SigmaCover 410 is suitable for use in coastal and industrial environments and can be used on structural steel and concrete appliances to produce a dark grey, light grey or off white finish.

ppg 410 mio sigmacover epoxy intermediate light grey) pack size 20 litres (abu-abu muda) ukuran kemasan liter epoksi kelabu saiz pek 环氧中间体（浅灰色）包装规格 环氧胶

ppg-410-mio-sigmacover-epoxy-intermediate-light-grey-pack-size-20-litres

Ppg SigmaCover 456 Epoxy Finish, All Colours

Two-component, high-build, polyamide-cured recoatable epoxy coating for steel and concrete structures exposed to atmospheric land or marine conditions.
 Key properties: Anticorrosive, water- and mild chemical-resistant, cures even at temperatures down to -10°C (14°F).

General-purpose epoxy buildcoat or finish for protective coating systems
 

Suitable for steel and concrete in atmospheric land or marine conditions
 

Easy application by airless spray and brush
 

Tolerant of high humidity (up to 95%) during application and curing without loss of quality
 

Good adhesion to most aged, sound alkyd, chlorinated rubber, and epoxy coatings
 

Can be recoated with two-component and conventional coatings, even after long weathering periods
 

Resistant to water and mild chemical splash
 

Tough and flexible for long-term durability
 

Colours: Standard and custom colours available
 

Epoxy coatings chalk and fade when exposed to sunlight
 

Substrate temperature during application/curing:
 

Minimum: -10°C (14°F), surface must be dry and free of ice
 

Should be at least 3°C (5°F) above dew point
 

In exceptional cases: application possible down to -15°C (5°F), but requires careful control of film thickness to avoid defects (checking, crazing, solvent entrapment)
 

Additional thinning may be required at lower temperatures to maintain viscosity, but this can reduce sag resistance and increase solvent retention
 

Optimal curing and full product performance achieved only when minimum substrate temperature is reached

<h3 class="md-block-header-three">Ppg SigmaCover 456 Epoxy Finish, All Colours</h3>Two-component, high-build, polyamide-cured recoatable epoxy coating for steel and concrete structures exposed to atmospheric land or marine conditions. Key properties: Anticorrosive, water- and mild chemical-resistant, cures even at temperatures down to -10°C (14°F).<h4 class="md-block-header-four">Product Features &amp; Benefits</h4><ul class="md-block-unordered-list-item"><li>General-purpose epoxy buildcoat or finish for protective coating systems </li><li>Suitable for steel and concrete in atmospheric land or marine conditions </li><li>Easy application by airless spray and brush </li><li>Cures down to -10°C (14°F) </li><li>Tolerant of high humidity (up to 95%) during application and curing without loss of quality </li><li>Good adhesion to most aged, sound alkyd, chlorinated rubber, and epoxy coatings </li><li>Can be recoated with two-component and conventional coatings, even after long weathering periods </li><li>Resistant to water and mild chemical splash </li><li>Excellent corrosion resistance </li><li>Tough and flexible for long-term durability </li><li>Colours: Standard and custom colours available </li><li>Gloss level: Semi-gloss </li></ul><h4 class="md-block-header-four">Method of Application</h4><ul class="md-block-unordered-list-item"><li>Air spray </li><li>Airless spray </li><li>Brush/Roller </li></ul><h4 class="md-block-header-four">Notes</h4><ul class="md-block-unordered-list-item"><li>Epoxy coatings chalk and fade when exposed to sunlight </li><li>Substrate temperature during application/curing: </li><ul class="md-block-unordered-list-item"><li>Minimum: -10°C (14°F), surface must be dry and free of ice </li><li>Should be at least 3°C (5°F) above dew point </li><li>In exceptional cases: application possible down to -15°C (5°F), but requires careful control of film thickness to avoid defects (checking, crazing, solvent entrapment) </li></ul><li>Additional thinning may be required at lower temperatures to maintain viscosity, but this can reduce sag resistance and increase solvent retention </li><li>Optimal curing and full product performance achieved only when minimum substrate temperature is reached</li></ul>

<h3>Ppg SigmaCover 456 Epoxy Finish, All Colours</h3>
Two-component, high-build, polyamide-cured recoatable epoxy coating for steel and concrete structures exposed to atmospheric land or marine conditions. 
 Key properties: Anticorrosive, water- and mild chemical-resistant, cures even at temperatures down to -10°C (14°F).
<h4>Product Features &amp; Benefits</h4>
<ul>
<li>General-purpose epoxy buildcoat or finish for protective coating systems 
&nbsp;</li>
<li>Suitable for steel and concrete in atmospheric land or marine conditions 
&nbsp;</li>
<li>Easy application by airless spray and brush 
&nbsp;</li>
<li>Cures down to -10°C (14°F) 
&nbsp;</li>
<li>Tolerant of high humidity (up to 95%) during application and curing without loss of quality 
&nbsp;</li>
<li>Good adhesion to most aged, sound alkyd, chlorinated rubber, and epoxy coatings 
&nbsp;</li>
<li>Can be recoated with two-component and conventional coatings, even after long weathering periods 
&nbsp;</li>
<li>Resistant to water and mild chemical splash 
&nbsp;</li>
<li>Excellent corrosion resistance 
&nbsp;</li>
<li>Tough and flexible for long-term durability 
&nbsp;</li>
<li>Colours: Standard and custom colours available 
&nbsp;</li>
<li>Gloss level: Semi-gloss 
&nbsp;</li>
</ul>
<h4>Method of Application</h4>
<ul>
<li>Air spray 
&nbsp;</li>
<li>Airless spray 
&nbsp;</li>
<li>Brush/Roller 
&nbsp;</li>
</ul>
<h4>Notes</h4>
<ul>
<li>Epoxy coatings chalk and fade when exposed to sunlight 
&nbsp;</li>
<li>Substrate temperature during application/curing: 
&nbsp;</li>
<ul>
<li>Minimum: -10°C (14°F), surface must be dry and free of ice 
&nbsp;</li>
<li>Should be at least 3°C (5°F) above dew point 
&nbsp;</li>
<li>In exceptional cases: application possible down to -15°C (5°F), but requires careful control of film thickness to avoid defects (checking, crazing, solvent entrapment) 
&nbsp;</li>
</ul>
<li>Additional thinning may be required at lower temperatures to maintain viscosity, but this can reduce sag resistance and increase solvent retention 
&nbsp;</li>
<li>Optimal curing and full product performance achieved only when minimum substrate temperature is reached</li>
</ul>

ppg sigmacover 456 epoxy finish, colours semua warna epoksi kemasan epoksi, 环氧涂层，所有颜色 环氧胶

ppg-sigmacover-456-epoxy-finish-all-colours

Size

00-A-05

10-B-15 Gardenia

Red Brown

White

Ppg 230 Sigmatherm Epoxy Phenolic up to Dry Temp 200 or 300degC (Pink, Grey) Pack Size 20 Litres

PPG SigmaTherm 230 is a two component high build heat resistant phenolic epoxy coating designed for use under insulation systems to provide heat protection of up to 230°C.

SigmaTherm 230 is a high performance, heat resistant product that provides protection to a variety of metal substrates. PPG SigmaTherm 230 is ideally suited for application to pipes, radiators and low heat engines to aid the protection of the surface and surrounding area.

Blast clean steel to ISO-Sa2.5 with a blasting profile of 40 - 70 microns. The substrate must be perfectly dry before and during application. Degrease stainless steel with solvents and sweep blast. The temperature of the mixed base and hardener should be above 15°C otherwise extra thinner may be required. Adding to much thinner results in reduced sag resistance. Allow sufficient induction time as per data sheet.

SigmaTherm 230 is a high performance product that provides surfaces with a high glossy finish to aid protection and offer a level of decoration with an aluminium effect. SigmaTherm 230 should ideally be used internally to offer heat resistance to appliances of up to 230°C.

<h3 class="md-block-header-three">Ppg 230 Sigmatherm Epoxy Phenolic up to Dry Temp 200 or 300degC (Pink, Grey) Pack Size 20 Litres</h3><ul class="md-block-unordered-list-item"><li>Product Details</li></ul>PPG SigmaTherm 230 is a two component high build heat resistant phenolic epoxy coating designed for use under insulation systems to provide heat protection of up to 230°C.<ul class="md-block-unordered-list-item"><li>Best Uses</li></ul>SigmaTherm 230 is a high performance, heat resistant product that provides protection to a variety of metal substrates. PPG SigmaTherm 230 is ideally suited for application to pipes, radiators and low heat engines to aid the protection of the surface and surrounding area.<ul class="md-block-unordered-list-item"><li>Application</li></ul>Blast clean steel to ISO-Sa2.5 with a blasting profile of 40 - 70 microns. The substrate must be perfectly dry before and during application. Degrease stainless steel with solvents and sweep blast. The temperature of the mixed base and hardener should be above 15°C otherwise extra thinner may be required. Adding to much thinner results in reduced sag resistance. Allow sufficient induction time as per data sheet.<ul class="md-block-unordered-list-item"><li>Surface and Environment</li></ul>SigmaTherm 230 is a high performance product that provides surfaces with a high glossy finish to aid protection and offer a level of decoration with an aluminium effect. SigmaTherm 230 should ideally be used internally to offer heat resistance to appliances of up to 230°C.

<h3>Ppg 230 Sigmatherm Epoxy Phenolic up to Dry Temp 200 or 300degC (Pink, Grey) Pack Size 20 Litres</h3>
<ul>
<li>Product Details</li>
</ul>
PPG SigmaTherm 230 is a two component high build heat resistant phenolic epoxy coating designed for use under insulation systems to provide heat protection of up to 230°C.
<ul>
<li>Best Uses</li>
</ul>
SigmaTherm 230 is a high performance, heat resistant product that provides protection to a variety of metal substrates. PPG SigmaTherm 230 is ideally suited for application to pipes, radiators and low heat engines to aid the protection of the surface and surrounding area.
<ul>
<li>Application</li>
</ul>
Blast clean steel to ISO-Sa2.5 with a blasting profile of 40 - 70 microns. The substrate must be perfectly dry before and during application. Degrease stainless steel with solvents and sweep blast. The temperature of the mixed base and hardener should be above 15°C otherwise extra thinner may be required. Adding to much thinner results in reduced sag resistance. Allow sufficient induction time as per data sheet.
<ul>
<li>Surface and Environment</li>
</ul>
SigmaTherm 230 is a high performance product that provides surfaces with a high glossy finish to aid protection and offer a level of decoration with an aluminium effect. SigmaTherm 230 should ideally be used internally to offer heat resistance to appliances of up to 230°C.

Ppg 230 Sigmatherm Epoxy Phenolic up to Dry Temp 200 or 300degC (pink, Grey) Pack Size 20 Litres

ppg 230 sigmatherm epoxy phenolic dry temp 200 300degc (pink, grey) pack size 20 litres hingga suhu kering atau 300 derajat celcius (merah muda, abu-abu) ukuran kemasan liter epoksi sehingga jambu, kelabu) saiz pek 环氧酚醛树脂，干燥温度高达 摄氏度（粉色、灰色）包装规格 环氧胶

ppg-230-sigmatherm-epoxy-phenolic-up-to-dry-temp-200-or-300degc-pink-grey-pack-size-20-litres

Pink

Ppg 435 Sigmacover Epoxy Mio Coat (up to Dry Temp 200degC) ( Light Grey) Pack Size 20 Litres

PPG SigmaCover 435 is best suited for use on exterior surfaces such as brick and steel in domestic, commercial and industrial surroundings which are exposed to harsh and extreme weather conditions.

This product cures at temperatures as low as -10°C and is resistant to temperatures as high as 200°C.

PPG SigmaCover 435 can be applied using a brush, roller or airless spray and leaves a touch dry finish in around 2-4 hours. Each litre of this products covers an area of roughly 6.3m2

PPG SigmaCover 435 is designed for exterior surfaces such as brick and steel which are exposed to harsh weather conditions.

Two-component, high-build, micaceous iron oxide (MIO) pigmented, polyamide-cured, recoatable epoxy coating

General-purpose epoxy build coat or finish in protective coating systems

Suitable for steel and concrete structures exposed to atmospheric land or marine conditions

Easy application by airless spray, air atomised spray, brush, or roller

Application Methods: Brush, Roller, Air Atomised Spray, Airless Spray

Theoretical Coverage: 6.3 m²/L at 100 microns

Dry Film Thickness (DFT): 75 – 150 microns

<h3 class="md-block-header-three">Ppg 435 Sigmacover Epoxy Mio Coat (up to Dry Temp 200degC) ( Light Grey) Pack Size 20 Litres</h3><ul class="md-block-unordered-list-item"><li>Best Uses</li></ul>PPG SigmaCover 435 is best suited for use on exterior surfaces such as brick and steel in domestic, commercial and industrial surroundings which are exposed to harsh and extreme weather conditions.This product cures at temperatures as low as -10°C and is resistant to temperatures as high as 200°C.<ul class="md-block-unordered-list-item"><li>Application</li></ul>PPG SigmaCover 435 can be applied using a brush, roller or airless spray and leaves a touch dry finish in around 2-4 hours. Each litre of this products covers an area of roughly 6.3m2<ul class="md-block-unordered-list-item"><li>Surface and Environment</li></ul>PPG SigmaCover 435 is designed for exterior surfaces such as brick and steel which are exposed to harsh weather conditions.TECHNICALFeatures<ul class="md-block-unordered-list-item"><li>Two-component, high-build, micaceous iron oxide (MIO) pigmented, polyamide-cured, recoatable epoxy coating</li><li>General-purpose epoxy build coat or finish in protective coating systems</li><li>Suitable for steel and concrete structures exposed to atmospheric land or marine conditions</li><li>Easy application by airless spray, air atomised spray, brush, or roller</li><li>Cures at temperatures down to -10°C</li></ul>Systems<ul class="md-block-unordered-list-item"><li>PPG 3102 System – Boot Top and Topside</li><li>PPG 3103 System – Decks</li></ul>Technical Information<ul class="md-block-unordered-list-item"><li>Components: Two part</li><li>Type: MIO</li><li>Finish: Eggshell</li><li>Tintable: No</li><li>VOC Content: 344 g/L</li><li>Volume Solids: 63%</li><li>Suitable Substrates: Steel, concrete</li><li>Application Methods: Brush, Roller, Air Atomised Spray, Airless Spray</li><li>Theoretical Coverage: 6.3 m²/L at 100 microns</li><li>Dry Film Thickness (DFT): 75 – 150 microns</li><li>Wet Film Thickness (WFT): –</li><li>Induction Time: –</li><li>Pot Life: 5 hours at 20°C</li><li>Touch Dry: 2 hours at 20°C</li><li>Overcoatable: After 3 hours at 20°C</li><li>Fully Cured: 4 days at 20°C</li><li>Cleaner / Thinner: PPG Thinner 91-92</li><li>Shelf Life: Minimum 24 months (cool, dry storage)</li><li>Packaging: 4 L and 20 L</li></ul>

<h3>Ppg 435 Sigmacover Epoxy Mio Coat (up to Dry Temp 200degC) ( Light Grey) Pack Size 20 Litres</h3>
<ul>
<li>Best Uses</li>
</ul>
PPG SigmaCover 435 is best suited for use on exterior surfaces such as brick and steel in domestic, commercial and industrial surroundings which are exposed to harsh and extreme weather conditions.
This product cures at temperatures as low as -10°C and is resistant to temperatures as high as 200°C.
<ul>
<li>Application</li>
</ul>
PPG SigmaCover 435 can be applied using a brush, roller or airless spray and leaves a touch dry finish in around 2-4 hours. Each litre of this products covers an area of roughly 6.3m2
<ul>
<li>Surface and Environment</li>
</ul>
PPG SigmaCover 435 is designed for exterior surfaces such as brick and steel which are exposed to harsh weather conditions.
TECHNICAL
Features
<ul>
<li>Two-component, high-build, micaceous iron oxide (MIO) pigmented, polyamide-cured, recoatable epoxy coating</li>
<li>General-purpose epoxy build coat or finish in protective coating systems</li>
<li>Suitable for steel and concrete structures exposed to atmospheric land or marine conditions</li>
<li>Easy application by airless spray, air atomised spray, brush, or roller</li>
<li>Cures at temperatures down to -10°C</li>
</ul>
Systems
<ul>
<li>PPG 3102 System – Boot Top and Topside</li>
<li>PPG 3103 System – Decks</li>
</ul>
Technical Information
<ul>
<li>Components: Two part</li>
<li>Type: MIO</li>
<li>Finish: Eggshell</li>
<li>Tintable: No</li>
<li>VOC Content: 344 g/L</li>
<li>Volume Solids: 63%</li>
<li>Suitable Substrates: Steel, concrete</li>
<li>Application Methods: Brush, Roller, Air Atomised Spray, Airless Spray</li>
<li>Theoretical Coverage: 6.3 m²/L at 100 microns</li>
<li>Dry Film Thickness (DFT): 75 – 150 microns</li>
<li>Wet Film Thickness (WFT): –</li>
<li>Induction Time: –</li>
<li>Pot Life: 5 hours at 20°C</li>
<li>Touch Dry: 2 hours at 20°C</li>
<li>Overcoatable: After 3 hours at 20°C</li>
<li>Fully Cured: 4 days at 20°C</li>
<li>Cleaner / Thinner: PPG Thinner 91-92</li>
<li>Shelf Life: Minimum 24 months (cool, dry storage)</li>
<li>Packaging: 4 L and 20 L</li>
</ul>

ppg 435 sigmacover epoxy mio coat (up dry temp 200degc) light grey) pack size 20 litres pg (hingga suhu kering 200 derajat c) (abu-abu muda) ukuran kemasan liter epoksi (sehingga kelabu saiz pek 环氧 涂层（最高干燥温度 摄氏度）（浅灰色）包装规格 环氧胶