Startech

IT & Electronics

it-electronics

Fiber-Optic Cable 

fiber-optic-cable

Networking Products

networking-products

Electricals

electricals

Transceiver

transceiver

Startech ET91000SM10 Lc, RJ45 Media Converter, Single Mode, 10/100/1000Mbit/s, Half/Full Duplex 10km

This heavy-duty fibre media converter is designed for maximum reliability. It features a metal (steel) enclosure, so it can withstand the demands of harsh environments such as factories or warehouses.

Plus, by relying on this more durable fibre media converter, you can reduce the strain on your existing copper-based network equipment and potentially extend the life of those devices, which helps save future expenses.

This high-performance media converter supports a range of network setup and diagnostic protocols (for example, Link Fault Pass-through, Auto Laser Shutdown (ALS), and Auto MDIX, so you can set up and troubleshoot your network easily.

If your existing network consists of RJ45 copper-based devices and cables, you might not be ready for future network expansion. Because the newest fibre-based network switches feature SFP ports more often than RJ45 ports, you might need a converter to bridge your copper and fibre networks together.

The ET91000SM10 is backed by a StarTech.com 2-year warranty, and free lifetime technical support.

• Supports Link Fault Pass-through (LFP), Auto Laser Shutdown (ALS), and Auto MDIX
• Up to 9.6K Jumbo Frame support
• Supports full- or half-duplex operation, as well as auto negotiation or forced mode
• Media converter's card module is compatible with enclosures from other StarTech.com ET91000 series media converters (sold separately)
• Compatible with Gigabit (1000Mbps) copper (IEEE 802.3ab, 1000BASE-T) and fibre (IEEE 802.3z, 1000BASE-LX) protocols
• Fast, hassle-free setup
• Rugged steel enclosure
• Flexible network integration, with support for standalone operation, or installation into the StarTech.com Rackmount Chassis (ETCHS2U - sold separately)
• Converts copper to fibre and extends your network up to 10 km (6.2 mi.) using single-mode LC fibre-optic cable (1310 nm)
• Removable SFP module (LC fibre connector) can be replaced should your network infrastructure change

• Can be installed into the StarTech.com 20U rackmount chassis (ETCHS2U - sold separately)
• Use fibre optic cable to connect to your network from remote areas or separate buildings, at greater distances than copper (RJ45) cable allows
• Perfect for secure connections required by government agencies where EMI isn’t acceptable
• Easily expand the number of ports on your existing network now, or in the future — perfect for small and medium businesses 

<h3 class="md-block-header-three">Startech ET91000SM10 Lc, RJ45 Media Converter, Single Mode, 10/100/1000Mbit/s, Half/Full Duplex 10km</h3><ul class="md-block-unordered-list-item"><li>Fibre Operating Mode	Half/Full Duplex</li><li>Maximum Data Transfer Rate	2000Mbps</li><li>Maximum Transfer Distance	10km</li><li>Connection Port	LC, RJ45</li><li>Fibre Type	Single Mode</li><li>Network Speed	10/100/1000Mbit/s</li></ul> Rugged and reliableThis heavy-duty fibre media converter is designed for maximum reliability. It features a metal (steel) enclosure, so it can withstand the demands of harsh environments such as factories or warehouses.Plus, by relying on this more durable fibre media converter, you can reduce the strain on your existing copper-based network equipment and potentially extend the life of those devices, which helps save future expenses.Diagnose and correct issues easilyThis high-performance media converter supports a range of network setup and diagnostic protocols (for example, Link Fault Pass-through, Auto Laser Shutdown (ALS), and Auto MDIX, so you can set up and troubleshoot your network easily.Prepare your network for the futureIf your existing network consists of RJ45 copper-based devices and cables, you might not be ready for future network expansion. Because the newest fibre-based network switches feature SFP ports more often than RJ45 ports, you might need a converter to bridge your copper and fibre networks together.The ET91000SM10 is backed by a StarTech.com 2-year warranty, and free lifetime technical support.Features &amp; Benefits• Supports Link Fault Pass-through (LFP), Auto Laser Shutdown (ALS), and Auto MDIX • Up to 9.6K Jumbo Frame support • Supports full- or half-duplex operation, as well as auto negotiation or forced mode • Media converter&#x27;s card module is compatible with enclosures from other StarTech.com ET91000 series media converters (sold separately) • Compatible with Gigabit (1000Mbps) copper (IEEE 802.3ab, 1000BASE-T) and fibre (IEEE 802.3z, 1000BASE-LX) protocols • Fast, hassle-free setup • Rugged steel enclosure • Flexible network integration, with support for standalone operation, or installation into the StarTech.com Rackmount Chassis (ETCHS2U - sold separately) • Converts copper to fibre and extends your network up to 10 km (6.2 mi.) using single-mode LC fibre-optic cable (1310 nm) • Removable SFP module (LC fibre connector) can be replaced should your network infrastructure changeApplications• Can be installed into the StarTech.com 20U rackmount chassis (ETCHS2U - sold separately) • Use fibre optic cable to connect to your network from remote areas or separate buildings, at greater distances than copper (RJ45) cable allows • Perfect for secure connections required by government agencies where EMI isn’t acceptable • Easily expand the number of ports on your existing network now, or in the future — perfect for small and medium businesses

<h3>Startech ET91000SM10 Lc, RJ45 Media Converter, Single Mode, 10/100/1000Mbit/s, Half/Full Duplex 10km</h3>
<ul>
<li>Fibre Operating Mode	Half/Full Duplex</li>
<li>Maximum Data Transfer Rate	2000Mbps</li>
<li>Maximum Transfer Distance	10km</li>
<li>Connection Port	LC, RJ45</li>
<li>Fibre Type	Single Mode</li>
<li>Network Speed	10/100/1000Mbit/s</li>
</ul>
&nbsp;Rugged and reliable
This heavy-duty fibre media converter is designed for maximum reliability. It features a metal (steel) enclosure, so it can withstand the demands of harsh environments such as factories or warehouses.
Plus, by relying on this more durable fibre media converter, you can reduce the strain on your existing copper-based network equipment and potentially extend the life of those devices, which helps save future expenses.
Diagnose and correct issues easily
This high-performance media converter supports a range of network setup and diagnostic protocols (for example, Link Fault Pass-through, Auto Laser Shutdown (ALS), and Auto MDIX, so you can set up and troubleshoot your network easily.
Prepare your network for the future
If your existing network consists of RJ45 copper-based devices and cables, you might not be ready for future network expansion. Because the newest fibre-based network switches feature SFP ports more often than RJ45 ports, you might need a converter to bridge your copper and fibre networks together.
The ET91000SM10 is backed by a StarTech.com 2-year warranty, and free lifetime technical support.
Features &amp; Benefits
• Supports Link Fault Pass-through (LFP), Auto Laser Shutdown (ALS), and Auto MDIX 
• Up to 9.6K Jumbo Frame support 
• Supports full- or half-duplex operation, as well as auto negotiation or forced mode 
• Media converter's card module is compatible with enclosures from other StarTech.com ET91000 series media converters (sold separately) 
• Compatible with Gigabit (1000Mbps) copper (IEEE 802.3ab, 1000BASE-T) and fibre (IEEE 802.3z, 1000BASE-LX) protocols 
• Fast, hassle-free setup 
• Rugged steel enclosure 
• Flexible network integration, with support for standalone operation, or installation into the StarTech.com Rackmount Chassis (ETCHS2U - sold separately) 
• Converts copper to fibre and extends your network up to 10 km (6.2 mi.) using single-mode LC fibre-optic cable (1310 nm) 
• Removable SFP module (LC fibre connector) can be replaced should your network infrastructure change
Applications
• Can be installed into the StarTech.com 20U rackmount chassis (ETCHS2U - sold separately) 
• Use fibre optic cable to connect to your network from remote areas or separate buildings, at greater distances than copper (RJ45) cable allows 
• Perfect for secure connections required by government agencies where EMI isn’t acceptable 
• Easily expand the number of ports on your existing network now, or in the future — perfect for small and medium businesses&nbsp;

ET91000SM10 Datasheet

RS Pro

SCHNEIDER ELECTRIC

FLUKE

Fluke Networks

Abus

Screw

O Ring

Surface Mount Resistors

Circular Connectors

Contactors

Bolts

Panel Mount Indicators 

Molded Case Circuit Breakers - MCCBs

Junction & Enclosure Box

Electrical Wire 

RS Components ETH SG

buyerIntroduction

startech et91000sm10 lc, rj45 media converter, single mode, 10/100/1000mbit/s, half/full duplex 10km konverter rj45, mode tunggal, dupleks setengah/penuh networking products produk jaringan penukar mod separuh/penuh rangkaian startech/星泰科技 lc，rj45 媒体转换器，单模，10/100/1000mbit/s，半双工/全双工 网络产品 星泰科技

startech-et91000sm10-lc-rj45-media-converter-single-mode-10-100-1000mbit-s-half-full-duplex-10km

Startech SFPGLCLHSMST Cisco Compatible Lc Multi Mode Transceiver Module, Half/Full Duplex

• Low power consumption of less than 1 W
• Hot-swappable with fibre-optic modules
• 100% compatibility with Cisco GLC-LH-SM guaranteed
• StarTech.com SFP modules are backed by a lifetime warranty
• Meets or exceeds OEM specifications and Multi-Source Agreement (MSA) industry standards

• Replacing defective or damaged SFP modules in Cisco switches and routers
• Expand your network to remote segments
 

<h3 class="md-block-header-three">Startech SFPGLCLHSMST Cisco Compatible Lc Multi Mode Transceiver Module, Half/Full Duplex</h3><ul class="md-block-unordered-list-item"><li> Compatible Brands	Cisco</li><li>Maximum Transfer Distance	10km</li><li>Fibre Type	Multi Mode</li><li>Maximum Data Transfer Rate	1250Mbps</li><li>Fibre Operating Mode	Half/Full Duplex</li><li>Connection Port	LC</li></ul>Features &amp; Benefits• Low power consumption of less than 1 W • Hot-swappable with fibre-optic modules • 100% compatibility with Cisco GLC-LH-SM guaranteed • StarTech.com SFP modules are backed by a lifetime warranty • Meets or exceeds OEM specifications and Multi-Source Agreement (MSA) industry standardsApplications• Replacing defective or damaged SFP modules in Cisco switches and routers • Expand your network to remote segments

<h3>Startech SFPGLCLHSMST Cisco Compatible Lc Multi Mode Transceiver Module, Half/Full Duplex</h3>
<ul>
<li>&nbsp;Compatible Brands	Cisco</li>
<li>Maximum Transfer Distance	10km</li>
<li>Fibre Type	Multi Mode</li>
<li>Maximum Data Transfer Rate	1250Mbps</li>
<li>Fibre Operating Mode	Half/Full Duplex</li>
<li>Connection Port	LC</li>
</ul>
Features &amp; Benefits
• Low power consumption of less than 1 W 
• Hot-swappable with fibre-optic modules 
• 100% compatibility with Cisco GLC-LH-SM guaranteed 
• StarTech.com SFP modules are backed by a lifetime warranty 
• Meets or exceeds OEM specifications and Multi-Source Agreement (MSA) industry standards
Applications
• Replacing defective or damaged SFP modules in Cisco switches and routers 
• Expand your network to remote segments 
&nbsp;

SFPGLCLHSMST Datasheet

startech sfpglclhsmst cisco compatible lc multi mode transceiver module, half/full duplex modul kompatibel dengan startech, pemancar modul, separuh/penuh dupleks startech/星泰科技 兼容 多模收发器模块，半双工/全双工 收发器 星泰科技

startech-sfpglclhsmst-cisco-compatible-lc-multi-mode-transceiver-module-half-full-duplex

Startech SFP100BLXST Msa Compatible Lc Single Mode Transceiver Module, Half/Full Duplex, 100Mbit/s 

 The SFP100BLXST is an MSA compliant fiber SFP transceiver that’s designed, programmed and tested to work with 100BASE-LX compatible MSA switches and routers. The SFP transceiver module supports a maximum distance of up to 10 km (6.2 mi) and delivers dependable 100 Mb Ethernet connectivity over fiber cabling.


Wavelength: 1310nm
Maximum Data Transfer Rate: 155 Mbps
Type: Single Mode Fiber
Connection Type: LC Connector
Maximum Transfer Distance: 10 km (6.2 mi)
Power Consumption: Less than 1 Watt
DDM: Yes


This SFP fiber module is hot-swappable, making upgrades and replacements seamless by minimizing network disruptions.


• Delivers reliable 100Mbps connections for 100BASE-LX compliant networks
• Complies with Multi-Source Agreement (MSA) industry standards
• Low power consumption of less than 1 W
• Hot-swappable with fiber-optic modules


• Replace defective or damaged SFP modules
• Expand your network to remote segments
The SFP100BLXST is a fiber SFP transceiver that’s designed, programmed and tested to work with 100BASE-LX compatible MSA switches and routers. The SFP transceiver module supports a maximum distance of up to 10 km (6.2 mi) and delivers dependable 100 Mb Ethernet connectivity over fiber cabling.
This SFP fiber module is hot-swappable, making upgrades and replacements seamless by minimizing network disruptions.
SFPs


What is a SFP Transceiver?
The SFP also known as ’small form-factor pluggable’ is a compact hot-swappable device that plugs into a SFP port of a network device or switch and is most commonly used for telecommunication and data communication applications. SFPs support communication using either fibre optic or copper networking cable. SFP optics have a transmitting side (Tx) and a receiving side (Rx). The transceiver communicates using a laser to the receiving side of the other optic network device. SFPs are built to support many different communication standards such as Gigabit Ethernet, Fibre Channel and SONET.
What is the difference between SFP & SFP+ transceivers?
SFP and SFP+ transceivers are very similar in terms of size and appearance. Primarily the key difference being that SFP+ is commonly used in Gigabit Ethernet applications while SFP is for 100Bse or 1000Base applications and SFP maximum data rate is limited to 10Gbps whereas SFP= transceivers support higher but also accounts for a difference in transmission distances. It’s important to note that a SFP+ transceiver cannot be plugged into an SFP port as SFP+ do not support speeds less than 1Gbps.
What is QSFP Transceiver?
QSFP also known as Quad small factor pluggable is a 4 channel type of compact hot swappable transceiver and is used for 40 Gigabit ethernet data communication applications. These devices support Ethernet, Fibre Channel, InfiniBand and SONET/SDH standards with different data rate options. The most common types include: 4x1Gbps QSFP, 4x10Gbps QSFP+, 4x28Gbps QSFP28.
QSFP+ and QSFP28 are the latest versions and support numerous 40Gbps and 100Gbps applications. Both QSFP+ and QSFP28 modules integrate 4 transmit and 4 receiver channels.
 

<h3 class="md-block-header-three">Startech SFP100BLXST Msa Compatible Lc Single Mode Transceiver Module, Half/Full Duplex, 100Mbit/s </h3> The SFP100BLXST is an MSA compliant fiber SFP transceiver that’s designed, programmed and tested to work with 100BASE-LX compatible MSA switches and routers. The SFP transceiver module supports a maximum distance of up to 10 km (6.2 mi) and delivers dependable 100 Mb Ethernet connectivity over fiber cabling. Technical Specifications: Wavelength: 1310nm Maximum Data Transfer Rate: 155 Mbps Type: Single Mode Fiber Connection Type: LC Connector Maximum Transfer Distance: 10 km (6.2 mi) Power Consumption: Less than 1 Watt DDM: Yes This SFP fiber module is hot-swappable, making upgrades and replacements seamless by minimizing network disruptions. StarTech.com SFPs <h3 class="md-block-header-three">Features &amp; Benefits</h3>• Delivers reliable 100Mbps connections for 100BASE-LX compliant networks • Complies with Multi-Source Agreement (MSA) industry standards • Low power consumption of less than 1 W • Hot-swappable with fiber-optic modules <h3 class="md-block-header-three">Applications</h3>• Replace defective or damaged SFP modules • Expand your network to remote segments The SFP100BLXST is a fiber SFP transceiver that’s designed, programmed and tested to work with 100BASE-LX compatible MSA switches and routers. The SFP transceiver module supports a maximum distance of up to 10 km (6.2 mi) and delivers dependable 100 Mb Ethernet connectivity over fiber cabling. This SFP fiber module is hot-swappable, making upgrades and replacements seamless by minimizing network disruptions. SFPs <h3 class="md-block-header-three">What’s in the package?</h3>• SFP transceiver <h3 class="md-block-header-three">FAQs</h3>What is a SFP Transceiver? The SFP also known as ’small form-factor pluggable’ is a compact hot-swappable device that plugs into a SFP port of a network device or switch and is most commonly used for telecommunication and data communication applications. SFPs support communication using either fibre optic or copper networking cable. SFP optics have a transmitting side (Tx) and a receiving side (Rx). The transceiver communicates using a laser to the receiving side of the other optic network device. SFPs are built to support many different communication standards such as Gigabit Ethernet, Fibre Channel and SONET. What is the difference between SFP &amp; SFP+ transceivers? SFP and SFP+ transceivers are very similar in terms of size and appearance. Primarily the key difference being that SFP+ is commonly used in Gigabit Ethernet applications while SFP is for 100Bse or 1000Base applications and SFP maximum data rate is limited to 10Gbps whereas SFP= transceivers support higher but also accounts for a difference in transmission distances. It’s important to note that a SFP+ transceiver cannot be plugged into an SFP port as SFP+ do not support speeds less than 1Gbps. What is QSFP Transceiver? QSFP also known as Quad small factor pluggable is a 4 channel type of compact hot swappable transceiver and is used for 40 Gigabit ethernet data communication applications. These devices support Ethernet, Fibre Channel, InfiniBand and SONET/SDH standards with different data rate options. The most common types include: 4x1Gbps QSFP, 4x10Gbps QSFP+, 4x28Gbps QSFP28. QSFP+ and QSFP28 are the latest versions and support numerous 40Gbps and 100Gbps applications. Both QSFP+ and QSFP28 modules integrate 4 transmit and 4 receiver channels.

<h3>Startech SFP100BLXST Msa Compatible Lc Single Mode Transceiver Module, Half/Full Duplex, 100Mbit/s </h3>
&nbsp;The SFP100BLXST is an MSA compliant fiber SFP transceiver that’s designed, programmed and tested to work with 100BASE-LX compatible MSA switches and routers. The SFP transceiver module supports a maximum distance of up to 10 km (6.2 mi) and delivers dependable 100 Mb Ethernet connectivity over fiber cabling. 

Technical Specifications: 

Wavelength: 1310nm 
Maximum Data Transfer Rate: 155 Mbps 
Type: Single Mode Fiber 
Connection Type: LC Connector 
Maximum Transfer Distance: 10 km (6.2 mi) 
Power Consumption: Less than 1 Watt 
DDM: Yes 

This SFP fiber module is hot-swappable, making upgrades and replacements seamless by minimizing network disruptions. 

StarTech.com SFPs 
 

<h3>Features &amp; Benefits</h3>
• Delivers reliable 100Mbps connections for 100BASE-LX compliant networks 
• Complies with Multi-Source Agreement (MSA) industry standards 
• Low power consumption of less than 1 W 
• Hot-swappable with fiber-optic modules 

<h3>Applications</h3>
• Replace defective or damaged SFP modules 
• Expand your network to remote segments 
The SFP100BLXST is a fiber SFP transceiver that’s designed, programmed and tested to work with 100BASE-LX compatible MSA switches and routers. The SFP transceiver module supports a maximum distance of up to 10 km (6.2 mi) and delivers dependable 100 Mb Ethernet connectivity over fiber cabling. 
This SFP fiber module is hot-swappable, making upgrades and replacements seamless by minimizing network disruptions. 
SFPs 

<h3>What’s in the package?</h3>
• SFP transceiver 

<h3>FAQs</h3>
What is a SFP Transceiver? 
The SFP also known as ’small form-factor pluggable’ is a compact hot-swappable device that plugs into a SFP port of a network device or switch and is most commonly used for telecommunication and data communication applications. SFPs support communication using either fibre optic or copper networking cable. SFP optics have a transmitting side (Tx) and a receiving side (Rx). The transceiver communicates using a laser to the receiving side of the other optic network device. SFPs are built to support many different communication standards such as Gigabit Ethernet, Fibre Channel and SONET. 
What is the difference between SFP &amp; SFP+ transceivers? 
SFP and SFP+ transceivers are very similar in terms of size and appearance. Primarily the key difference being that SFP+ is commonly used in Gigabit Ethernet applications while SFP is for 100Bse or 1000Base applications and SFP maximum data rate is limited to 10Gbps whereas SFP= transceivers support higher but also accounts for a difference in transmission distances. It’s important to note that a SFP+ transceiver cannot be plugged into an SFP port as SFP+ do not support speeds less than 1Gbps. 
What is QSFP Transceiver? 
QSFP also known as Quad small factor pluggable is a 4 channel type of compact hot swappable transceiver and is used for 40 Gigabit ethernet data communication applications. These devices support Ethernet, Fibre Channel, InfiniBand and SONET/SDH standards with different data rate options. The most common types include: 4x1Gbps QSFP, 4x10Gbps QSFP+, 4x28Gbps QSFP28. 
QSFP+ and QSFP28 are the latest versions and support numerous 40Gbps and 100Gbps applications. Both QSFP+ and QSFP28 modules integrate 4 transmit and 4 receiver channels. 
&nbsp;

Datasheet SFP100BLXST

Startech SFP100BLXST Msa Compatible Lc Single Mode Transceiver Module, Half/Full Duplex, 100Mbit/s

startech sfp100blxst msa compatible lc single mode transceiver module, half/full duplex, 100mbit/s modul tunggal kompatibel dengan msa, networking products produk jaringan serasi mod tunggal, dupleks separuh/penuh, rangkaian startech/星泰科技 兼容 单模收发器模块，半/全双工，100mbit/s 网络产品 星泰科技

startech-sfp100blxst-msa-compatible-lc-single-mode-transceiver-module-half-full-duplex-100mbit-s

Startech J9150A-ST Hp Compatible Lc Multi Mode Transceiver Module, Full Duplex

 Use this multimode transceiver module from StarTech.com to extend your wireless network connection. It's suitable for most workplaces as it provides a maximum data transfer of 10Gbps over a distance of up to 300m. The LC connection port uses half the space of its SC counterpart making the module smaller, so it can be easily fitted into busy setups.
High compatibilityThe transceiver works with HP switches including those numbered 1400, 1700, 1800, 2510 and 2600. It's also compatible with other MSA-compliant switches from Ubiquiti, D-Link, Netgear, Supermicro and TP-Link.
Hot-swappableYou can upgrade and replace units without stopping your workflow as the hot-swappable transceiver doesn't call for system shut-down.
• Digital diagnostics monitoring reports the status of the transceiver so that you stay on top of any issues within your network
• High MBTF of over 490 million hours for reliability
The Startech J9150A-ST is a HP J9150A compatible fiber transceiver module that has been designed, programmed and tested to work with HP brand switches and routers. It delivers dependable 10 GbE connectivity over fiber cable for 10GBase-LR compliant networks with a maximum distance of up to 10 km. Meets or exceeds OEM specifications and Multi-Source Agreement (MSA) industry standards.


This fiber module is hot-swappable, making upgrades and replacements seamless by minimizing network disruptions
Consumes very low power less than 1.3W
What does a high MTBF indicate?MTBF stands for 'mean time between failures', so a high rating means that the unit is unlikely to experience a failure. The higher the number, the more reliable the component.
 

<h3 class="md-block-header-three">Startech J9150A-ST Hp Compatible Lc Multi Mode Transceiver Module, Full Duplex</h3> Use this multimode transceiver module from StarTech.com to extend your wireless network connection. It&#x27;s suitable for most workplaces as it provides a maximum data transfer of 10Gbps over a distance of up to 300m. The LC connection port uses half the space of its SC counterpart making the module smaller, so it can be easily fitted into busy setups. High compatibilityThe transceiver works with HP switches including those numbered 1400, 1700, 1800, 2510 and 2600. It&#x27;s also compatible with other MSA-compliant switches from Ubiquiti, D-Link, Netgear, Supermicro and TP-Link. Hot-swappableYou can upgrade and replace units without stopping your workflow as the hot-swappable transceiver doesn&#x27;t call for system shut-down. • Digital diagnostics monitoring reports the status of the transceiver so that you stay on top of any issues within your network • High MBTF of over 490 million hours for reliability The Startech J9150A-ST is a HP J9150A compatible fiber transceiver module that has been designed, programmed and tested to work with HP brand switches and routers. It delivers dependable 10 GbE connectivity over fiber cable for 10GBase-LR compliant networks with a maximum distance of up to 10 km. Meets or exceeds OEM specifications and Multi-Source Agreement (MSA) industry standards. <h3 class="md-block-header-three">FAQs</h3>This fiber module is hot-swappable, making upgrades and replacements seamless by minimizing network disruptions Consumes very low power less than 1.3W What does a high MTBF indicate?MTBF stands for &#x27;mean time between failures&#x27;, so a high rating means that the unit is unlikely to experience a failure. The higher the number, the more reliable the component.

<h3>Startech J9150A-ST Hp Compatible Lc Multi Mode Transceiver Module, Full Duplex</h3>
&nbsp;Use this multimode transceiver module from StarTech.com to extend your wireless network connection. It's suitable for most workplaces as it provides a maximum data transfer of 10Gbps over a distance of up to 300m. The LC connection port uses half the space of its SC counterpart making the module smaller, so it can be easily fitted into busy setups. 
High compatibilityThe transceiver works with HP switches including those numbered 1400, 1700, 1800, 2510 and 2600. It's also compatible with other MSA-compliant switches from Ubiquiti, D-Link, Netgear, Supermicro and TP-Link. 
Hot-swappableYou can upgrade and replace units without stopping your workflow as the hot-swappable transceiver doesn't call for system shut-down. 
• Digital diagnostics monitoring reports the status of the transceiver so that you stay on top of any issues within your network 
• High MBTF of over 490 million hours for reliability 
The Startech J9150A-ST is a HP J9150A compatible fiber transceiver module that has been designed, programmed and tested to work with HP brand switches and routers. It delivers dependable 10 GbE connectivity over fiber cable for 10GBase-LR compliant networks with a maximum distance of up to 10 km. Meets or exceeds OEM specifications and Multi-Source Agreement (MSA) industry standards. 

<h3>FAQs</h3>
This fiber module is hot-swappable, making upgrades and replacements seamless by minimizing network disruptions 
Consumes very low power less than 1.3W 
What does a high MTBF indicate?MTBF stands for 'mean time between failures', so a high rating means that the unit is unlikely to experience a failure. The higher the number, the more reliable the component. 
&nbsp;

Datasheet - J9150A-ST

SFP Guide J9150AST

startech j9150a-st hp compatible lc multi mode transceiver module, full duplex modul kompatibel dengan hp, dupleks penuh fiber-optic cable kabel serat optik serasi mod modul, fibre startech/星泰科技 兼容 多模收发器模块，全双工 光纤电缆 星泰科技

startech-j9150a-st-hp-compatible-lc-multi-mode-transceiver-module-full-duplex

Startech J9151A-ST Hp Compatible Lc Single Mode Transceiver Module, Full Duplex 

 Use this StarTech.com transceiver module to relay your wireless connection. It's ideal for use where long-range connectivity is needed as it extends your network’s reach by up to 10km. Within this range, you can expect a data transfer rate of up to 10Gbps, allowing for speedy uploads and downloads.
CompatibilityThe transceiver is compatible with a wide range of MSA-compliant switches and routers. It’s manufactured and tested to work with HP products including the switch numbers 2920, 2910al, 3500yl, 3800 and 5400zl.
Hot-swap enabledAs the unit enables hot-swapping, there's no need to shut down your system during maintenance.
Space-efficientThe use of an LC connector, as opposed to an SC connector, ensures that minimal space is taken up by the transceiver as the connection is half the size.
• Mean time between failures of over one billion hours for reliability
• Digital diagnostics monitoring for quick error detection
The Startech J9151A-ST is a HP J9151A compatible fiber transceiver module that has been designed, programmed and tested to work with HP brand switches and routers. It delivers dependable 10 GbE connectivity over fiber cable for 10GBase-LR compliant networks with a maximum distance of up to 10 km. Meets or exceeds OEM specifications and Multi-Source Agreement (MSA) industry standards.


This fiber module is hot-swappable, making upgrades and replacements seamless by minimizing network disruptions
Consumes very low power less than 1.3W
What’s the difference between single-mode and multimode fibre?Using single-mode fibre allows for signal transfer over a much greater distance than multimode fibre. It uses one method of light transmission as opposed to multiple methods.
 

<h3 class="md-block-header-three">Startech J9151A-ST Hp Compatible Lc Single Mode Transceiver Module, Full Duplex </h3> Use this StarTech.com transceiver module to relay your wireless connection. It&#x27;s ideal for use where long-range connectivity is needed as it extends your network’s reach by up to 10km. Within this range, you can expect a data transfer rate of up to 10Gbps, allowing for speedy uploads and downloads. CompatibilityThe transceiver is compatible with a wide range of MSA-compliant switches and routers. It’s manufactured and tested to work with HP products including the switch numbers 2920, 2910al, 3500yl, 3800 and 5400zl. Hot-swap enabledAs the unit enables hot-swapping, there&#x27;s no need to shut down your system during maintenance. Space-efficientThe use of an LC connector, as opposed to an SC connector, ensures that minimal space is taken up by the transceiver as the connection is half the size. • Mean time between failures of over one billion hours for reliability • Digital diagnostics monitoring for quick error detection The Startech J9151A-ST is a HP J9151A compatible fiber transceiver module that has been designed, programmed and tested to work with HP brand switches and routers. It delivers dependable 10 GbE connectivity over fiber cable for 10GBase-LR compliant networks with a maximum distance of up to 10 km. Meets or exceeds OEM specifications and Multi-Source Agreement (MSA) industry standards. <h3 class="md-block-header-three">FAQs</h3>This fiber module is hot-swappable, making upgrades and replacements seamless by minimizing network disruptions Consumes very low power less than 1.3W What’s the difference between single-mode and multimode fibre?Using single-mode fibre allows for signal transfer over a much greater distance than multimode fibre. It uses one method of light transmission as opposed to multiple methods.

<h3>Startech J9151A-ST Hp Compatible Lc Single Mode Transceiver Module, Full Duplex </h3>
&nbsp;Use this StarTech.com transceiver module to relay your wireless connection. It's ideal for use where long-range connectivity is needed as it extends your network’s reach by up to 10km. Within this range, you can expect a data transfer rate of up to 10Gbps, allowing for speedy uploads and downloads. 
CompatibilityThe transceiver is compatible with a wide range of MSA-compliant switches and routers. It’s manufactured and tested to work with HP products including the switch numbers 2920, 2910al, 3500yl, 3800 and 5400zl. 
Hot-swap enabledAs the unit enables hot-swapping, there's no need to shut down your system during maintenance. 
Space-efficientThe use of an LC connector, as opposed to an SC connector, ensures that minimal space is taken up by the transceiver as the connection is half the size. 
• Mean time between failures of over one billion hours for reliability 
• Digital diagnostics monitoring for quick error detection 
The Startech J9151A-ST is a HP J9151A compatible fiber transceiver module that has been designed, programmed and tested to work with HP brand switches and routers. It delivers dependable 10 GbE connectivity over fiber cable for 10GBase-LR compliant networks with a maximum distance of up to 10 km. Meets or exceeds OEM specifications and Multi-Source Agreement (MSA) industry standards. 

<h3>FAQs</h3>
This fiber module is hot-swappable, making upgrades and replacements seamless by minimizing network disruptions 
Consumes very low power less than 1.3W 
What’s the difference between single-mode and multimode fibre?Using single-mode fibre allows for signal transfer over a much greater distance than multimode fibre. It uses one method of light transmission as opposed to multiple methods. 
&nbsp;

Datasheet - J9151A-ST

SFP Guide J9151AST

Startech J9151A-ST Hp Compatible Lc Single Mode Transceiver Module, Full Duplex

startech j9151a-st hp compatible lc single mode transceiver module, full duplex modul tunggal kompatibel dengan hp, dupleks penuh fiber-optic cable kabel serat optik serasi pemindah mod tunggal, fibre startech/星泰科技 兼容 单模收发器模块，全双工 光纤电缆 星泰科技