FLUKE

Test & Measurement

test-measurement

Calibrators

calibrators

Electrical Power Testing

electrical-power-testing

Fluke 1623-2 Earth Tester, 19.99kΩ Cat Ii 300 V

 Absolute Maximum Resistance Measurement	19.99kΩ

Measurement Type	3 & 4 Pole Fall of Potential, 4 Pole Selective Earth Resistance, Selective, Stakeless

3-pole and 4-pole Fall-of-Potential, earth resistance loop testing
4-pole soil resistivity testing
LCD Display to indicate the test result
Operating temperature ranges between -100C and 500C
Selective earth ground rod testing using 1 clamp
Stakeless earth ground rod testing using 2 clamps

DIN ISO 9001
EN60529
IEC 654-1
IEC61010-1
IP56 rated
 

<h3 class="md-block-header-three">Fluke 1623-2 Earth Tester, 19.99kΩ Cat Ii 300 V</h3><ul class="md-block-unordered-list-item"><li> Absolute Maximum Resistance Measurement	19.99kΩ</li><li>Best Accuracy	±2% + 2 Digits</li><li>Measurement Type	3 &amp; 4 Pole Fall of Potential, 4 Pole Selective Earth Resistance, Selective, Stakeless</li><li>Display Type	LCD</li><li>Safety Category	CAT II 300 V</li><li>Battery Life	3000 Measurements</li><li>Battery Type	AA</li><li>Power Source	Battery</li><li>Weight	1.1kg</li><li>Height	133mm</li><li>Includes	Battery</li><li>Length	250mm</li><li>Maximum Operating Temperature	+35°C</li><li>Model Number p	1623</li><li>Minimum Operating Temperature	0°C</li><li>Safety Category Level	CAT II</li><li>Width	187mm</li><li>Safety Category Voltage	300V</li></ul>Features and Benefits3-pole and 4-pole Fall-of-Potential, earth resistance loop testing 4-pole soil resistivity testing LCD Display to indicate the test result Operating temperature ranges between -100C and 500C Selective earth ground rod testing using 1 clamp Stakeless earth ground rod testing using 2 clampsCertificationsDIN ISO 9001 EN60529 IEC 654-1 IEC61010-1 IP56 rated

<h3>Fluke 1623-2 Earth Tester, 19.99kΩ Cat Ii 300 V</h3>
<ul>
<li>&nbsp;Absolute Maximum Resistance Measurement	19.99kΩ</li>
<li>Best Accuracy	±2% + 2 Digits</li>
<li>Measurement Type	3 &amp; 4 Pole Fall of Potential, 4 Pole Selective Earth Resistance, Selective, Stakeless</li>
<li>Display Type	LCD</li>
<li>Safety Category	CAT II 300 V</li>
<li>Battery Life	3000 Measurements</li>
<li>Battery Type	AA</li>
<li>Power Source	Battery</li>
<li>Weight	1.1kg</li>
<li>Height	133mm</li>
<li>Includes	Battery</li>
<li>Length	250mm</li>
<li>Maximum Operating Temperature	+35°C</li>
<li>Model Number p	1623</li>
<li>Minimum Operating Temperature	0°C</li>
<li>Safety Category Level	CAT II</li>
<li>Width	187mm</li>
<li>Safety Category Voltage	300V</li>
</ul>
Features and Benefits
3-pole and 4-pole Fall-of-Potential, earth resistance loop testing 
4-pole soil resistivity testing 
LCD Display to indicate the test result 
Operating temperature ranges between -100C and 500C 
Selective earth ground rod testing using 1 clamp 
Stakeless earth ground rod testing using 2 clamps
Certifications
DIN ISO 9001 
EN60529 
IEC 654-1 
IEC61010-1 
IP56 rated 
&nbsp;

Fluke 1623-2 Earth/Ground Tester

Fluke 1623-2 and 1625-2 GEO Earth Ground Testers

RS Pro

SCHNEIDER ELECTRIC

Fluke Networks

Abus

Screw

O Ring

Surface Mount Resistors

Circular Connectors

Contactors

Bolts

Panel Mount Indicators 

Molded Case Circuit Breakers - MCCBs

Junction & Enclosure Box

Electrical Wire 

RS Components ETH SG

buyerIntroduction

fluke 1623-2 earth tester, 19.99kω cat ii 300 penguji bumi 1623-2, 19,99kω electrical power testing pengujian daya listrik ujian tenaga elektrik fluke/福禄克 接地电阻测试仪，19.99kω 电力测试 福禄克

fluke-1623-2-earth-tester-19-99k-cat-ii-300-v

 Fluke 712B RTD Calibrator is a handheld, battery-operated instrument that measures and sources a variety of RTD types and resistances. It also includes an isolated channel to measure 4-20 mA whiles sourcing a temperature signal. It offers configurable 0% and 100% source settings for quick 25% linearity checks. It also provides linear ramp and 25% step auto ramp functionality based on 0% and 100% settings.  

Add to that dual inputs, an easy to view backlit display, plus the ability to memorize settings at power down for easy restart make the 712B the ideal test tool for temperature calibration professionals who want a highly accurate, easy-to-use, single function RTD temperature calibrator. 

Highly accurate, full-featured , easy-to-use single function RTD temperature calibrator

Measures and simulates 13 different RTD types and resistance

Measures 4 to 20 mA signals while simultaneously sourcing a temperature signal

Comes with a magnetic hanging tool designed in for convenient hands-free operation

Features configurable 0% and 100% source settings for quick 25% linearity checks

Dual inputs and backlit display for easy interpretation of measurements

Remembers power down settings to easily restart tests when powered up

Provides linear ramp and 25% step auto ramp based on 0% and 100% settings

Provides one-year and two-year specifications and traceable certification of calibration 

Maximum Voltage: 30 V applied between any terminal and earth ground or between any two terminals

Relative Humidity (% RH operating without condensation):

Vibration Requirements: MIL-T-28800E, Class 2

IP Rating: IEC 60529: IP52 (protected against dust limited ingress, protected against direct sprays of water up to 15 degrees from vertical)

Electromagnetic Environment: IEC 61326-1, Portable

Safety: IEC 61010-1, Max 30 V to earth, Pollution Degree 2

Power Supply: 4 AA NEDA 1.5A IEC LR6 batteries

<h3 class="md-block-header-three">Fluke 712B Rtd Calibrators</h3> Fluke 712B RTD Calibrator is a handheld, battery-operated instrument that measures and sources a variety of RTD types and resistances. It also includes an isolated channel to measure 4-20 mA whiles sourcing a temperature signal. It offers configurable 0% and 100% source settings for quick 25% linearity checks. It also provides linear ramp and 25% step auto ramp functionality based on 0% and 100% settings. Add to that dual inputs, an easy to view backlit display, plus the ability to memorize settings at power down for easy restart make the 712B the ideal test tool for temperature calibration professionals who want a highly accurate, easy-to-use, single function RTD temperature calibrator. <ul class="md-block-unordered-list-item"><li>Highly accurate, full-featured , easy-to-use single function RTD temperature calibrator</li><li>Measures and simulates 13 different RTD types and resistance</li><li>Measures 4 to 20 mA signals while simultaneously sourcing a temperature signal</li><li>Comes with a magnetic hanging tool designed in for convenient hands-free operation</li><li>Features configurable 0% and 100% source settings for quick 25% linearity checks</li></ul>Other useful features:<ul class="md-block-unordered-list-item"><li>Dual inputs and backlit display for easy interpretation of measurements</li><li>Remembers power down settings to easily restart tests when powered up</li><li>Provides linear ramp and 25% step auto ramp based on 0% and 100% settings</li><li>Provides one-year and two-year specifications and traceable certification of calibration </li></ul><h3 class="md-block-header-three">General Specifications</h3><ul class="md-block-unordered-list-item"><li>Maximum Voltage: 30 V applied between any terminal and earth ground or between any two terminals</li><li>Operating Temperature: -10°C to 50°C</li><li>Storage Temperature: -30°C to 60°C</li><li>Operating Altitude: 2,000 m</li><li>Storage Altitude: 12,000 m</li><li>Relative Humidity (% RH operating without condensation):</li><ul class="md-block-unordered-list-item"><li>90% (10°C to 30°C)</li><li>75% (30°C to 40°C)</li><li>45% (40°C to 50°C)</li></ul><li>Vibration Requirements: MIL-T-28800E, Class 2</li><li>Drop Test Requirements: 1 m</li><li>IP Rating: IEC 60529: IP52 (protected against dust limited ingress, protected against direct sprays of water up to 15 degrees from vertical)</li><li>Electromagnetic Environment: IEC 61326-1, Portable</li><li>Safety: IEC 61010-1, Max 30 V to earth, Pollution Degree 2</li><li>Power Supply: 4 AA NEDA 1.5A IEC LR6 batteries</li><li>Size (H x W x L): 52.5 x 84 x 188.5 mm</li><li>Weight: 515 g</li></ul>

<h3>Fluke 712B Rtd Calibrators</h3>
&nbsp;Fluke 712B RTD Calibrator is a handheld, battery-operated instrument that measures and sources a variety of RTD types and resistances. It also includes an isolated channel to measure 4-20 mA whiles sourcing a temperature signal. It offers configurable 0% and 100% source settings for quick 25% linearity checks. It also provides linear ramp and 25% step auto ramp functionality based on 0% and 100% settings.&nbsp;&nbsp;
Add to that dual inputs, an easy to view backlit display, plus the ability to memorize settings at power down for easy restart make the 712B the ideal test tool for temperature calibration professionals who want a highly accurate, easy-to-use, single function RTD temperature calibrator.&nbsp;
<ul>
<li>Highly accurate, full-featured , easy-to-use single function RTD temperature calibrator</li>
<li>Measures and simulates 13 different RTD types and resistance</li>
<li>Measures 4 to 20 mA signals while simultaneously sourcing a temperature signal</li>
<li>Comes with a magnetic hanging tool designed in for convenient hands-free operation</li>
<li>Features configurable 0% and 100% source settings for quick 25% linearity checks</li>
</ul>
Other useful features:
<ul>
<li>Dual inputs and backlit display for easy interpretation of measurements</li>
<li>Remembers power down settings to easily restart tests when powered up</li>
<li>Provides linear ramp and 25% step auto ramp based on 0% and 100% settings</li>
<li>Provides one-year and two-year specifications and traceable certification of calibration&nbsp;</li>
</ul>
<h3>General Specifications</h3>
<ul>
<li>Maximum Voltage: 30 V applied between any terminal and earth ground or between any two terminals</li>
<li>Operating Temperature: -10°C to 50°C</li>
<li>Storage Temperature: -30°C to 60°C</li>
<li>Operating Altitude: 2,000 m</li>
<li>Storage Altitude: 12,000 m</li>
<li>Relative Humidity (% RH operating without condensation):</li>
<ul>
<li>90% (10°C to 30°C)</li>
<li>75% (30°C to 40°C)</li>
<li>45% (40°C to 50°C)</li>
</ul>
<li>Vibration Requirements: MIL-T-28800E, Class 2</li>
<li>Drop Test Requirements: 1 m</li>
<li>IP Rating: IEC 60529: IP52 (protected against dust limited ingress, protected against direct sprays of water up to 15 degrees from vertical)</li>
<li>Electromagnetic Environment: IEC 61326-1, Portable</li>
<li>Safety: IEC 61010-1, Max 30 V to earth, Pollution Degree 2</li>
<li>Power Supply: 4 AA NEDA 1.5A IEC LR6 batteries</li>
<li>Size (H x W x L): 52.5 x 84 x 188.5 mm</li>
<li>Weight: 515 g</li>
</ul>

Extech

ACISION

Center

TRIPLETT

PCE Instruments

MEGGER

AMPROBE

Multimeters

Other Measuring Tools

Clamp Meters

Industrial Thermometer

Sound & Vibration Meters

Thermal Imaging Cameras

Humidity & Temperature

Multimeter Leads

CETM

Fluke 712B Rtd Calibrators

fluke 712b rtd calibrators kalibrator penentukuran fluke/福禄克 校准器 福禄克

fluke-712b-rtd-calibrators

Fluke TL175 Test Lead Kit, Cat Iii, Cat Iv, 10A

Safety Category	CAT III 1000 V, CAT IV 600V

Each test lead covered by two layers of silicone insulation
Extra-heavy strain relief on probe-end and plug-end
Universal input plugs compatible with all instruments that accept standard mm shrouded banana plugs
Ratings: CAT II 1000 V, CAT III 1000 V, CAT IV 600 V, 10 A max., Pollution Degree 2
Probes always show correct category rating for tip being used
Environmental ratings -20°C to +55°C
Conforms to safety standard EN61010-031: 2008

These leads are connecting cables which are used specifically for Multimeters, attaching a test probe to the end will allow the user to measure the required voltage, current or electrical resistance. As it assists operation with a multimeter, at least two of these types of electrical values are measured.

Connecting to Fluke multimeters, a set of test probes will measure the device or target for an accurate reading, such as voltage or current. Due to the flexibility and quality produced by Fluke, each probe provides much-needed precision.

One pair (red, black) Fluke TL175 TwistGuard™ Test Leads
Exposed probe tip length from 19mm to 4mm

FLUKE Multimeter Leads, Test Lead Kit Type, 10A Current Rating - TL175

Get a clear read on electrical signals with this test lead kit from FLUKE. Plug one end into your multimeter and use the probe on the other to measure circuit metrics including voltage, current and resistance. The extendable tips are adjustable to between 4 and 19mm, delivering pinpoint accuracy in different testing setups. Sturdy strain relief at both ends supports a reliable connection that you can rest assured will go the distance.

• Compatible with instruments that accept standard 4mm shrouded banana plugs, so it's a versatile piece of kit
• CAT IV 600V rating indicates it can withstand voltage surges of up to 8000V, for reliable user safety
• Double silicone insulation is resistant to oil and solvent damage, for a longer service life
• Probes always display the correct category rating for the tip exposure used, giving you added peace of mind

• Household outlets
• Switch testing
• Manufacturing facilities
• Automotive industry
 

<h3 class="md-block-header-three">Fluke TL175 Test Lead Kit, Cat Iii, Cat Iv, 10A</h3><ul class="md-block-unordered-list-item"><li> Lead Type	Test Lead Kit</li><li>Product Type	Test leads</li><li>Connector Type	Shrouded</li><li>Current Rating	10A</li><li>Safety Category Voltage	1000 V, 600V</li><li>Safety Category	CAT III 1000 V, CAT IV 600V</li><li>Minimum Operating Temperature	-20°C</li><li>Maximum Operating Temperature	+55°C</li><li>Safety Category Level	CAT III, CAT IV</li></ul>Features &amp; BenefitsEach test lead covered by two layers of silicone insulation Extra-heavy strain relief on probe-end and plug-end Universal input plugs compatible with all instruments that accept standard mm shrouded banana plugs Ratings: CAT II 1000 V, CAT III 1000 V, CAT IV 600 V, 10 A max., Pollution Degree 2 Probes always show correct category rating for tip being used Environmental ratings -20°C to +55°C Conforms to safety standard EN61010-031: 2008What are test leads?These leads are connecting cables which are used specifically for Multimeters, attaching a test probe to the end will allow the user to measure the required voltage, current or electrical resistance. As it assists operation with a multimeter, at least two of these types of electrical values are measured.What are test probes?Connecting to Fluke multimeters, a set of test probes will measure the device or target for an accurate reading, such as voltage or current. Due to the flexibility and quality produced by Fluke, each probe provides much-needed precision.Supplied withOne pair (red, black) Fluke TL175 TwistGuard™ Test Leads Exposed probe tip length from 19mm to 4mmFLUKE Multimeter Leads, Test Lead Kit Type, 10A Current Rating - TL175Get a clear read on electrical signals with this test lead kit from FLUKE. Plug one end into your multimeter and use the probe on the other to measure circuit metrics including voltage, current and resistance. The extendable tips are adjustable to between 4 and 19mm, delivering pinpoint accuracy in different testing setups. Sturdy strain relief at both ends supports a reliable connection that you can rest assured will go the distance.Features &amp; Benefits• Compatible with instruments that accept standard 4mm shrouded banana plugs, so it&#x27;s a versatile piece of kit • CAT IV 600V rating indicates it can withstand voltage surges of up to 8000V, for reliable user safety • Double silicone insulation is resistant to oil and solvent damage, for a longer service life • Probes always display the correct category rating for the tip exposure used, giving you added peace of mindApplications• Household outlets • Switch testing • Manufacturing facilities • Automotive industry

<h3>Fluke TL175 Test Lead Kit, Cat Iii, Cat Iv, 10A</h3>
<ul>
<li>&nbsp;Lead Type	Test Lead Kit</li>
<li>Product Type	Test leads</li>
<li>Connector Type	Shrouded</li>
<li>Current Rating	10A</li>
<li>Safety Category Voltage	1000 V, 600V</li>
<li>Safety Category	CAT III 1000 V, CAT IV 600V</li>
<li>Minimum Operating Temperature	-20°C</li>
<li>Maximum Operating Temperature	+55°C</li>
<li>Safety Category Level	CAT III, CAT IV</li>
</ul>
Features &amp; Benefits
Each test lead covered by two layers of silicone insulation 
Extra-heavy strain relief on probe-end and plug-end 
Universal input plugs compatible with all instruments that accept standard mm shrouded banana plugs 
Ratings: CAT II 1000 V, CAT III 1000 V, CAT IV 600 V, 10 A max., Pollution Degree 2 
Probes always show correct category rating for tip being used 
Environmental ratings -20°C to +55°C 
Conforms to safety standard EN61010-031: 2008
What are test leads?
These leads are connecting cables which are used specifically for Multimeters, attaching a test probe to the end will allow the user to measure the required voltage, current or electrical resistance. As it assists operation with a multimeter, at least two of these types of electrical values are measured.
What are test probes?
Connecting to Fluke multimeters, a set of test probes will measure the device or target for an accurate reading, such as voltage or current. Due to the flexibility and quality produced by Fluke, each probe provides much-needed precision.
Supplied with
One pair (red, black) Fluke TL175 TwistGuard™ Test Leads 
Exposed probe tip length from 19mm to 4mm
FLUKE Multimeter Leads, Test Lead Kit Type, 10A Current Rating - TL175
Get a clear read on electrical signals with this test lead kit from FLUKE. Plug one end into your multimeter and use the probe on the other to measure circuit metrics including voltage, current and resistance. The extendable tips are adjustable to between 4 and 19mm, delivering pinpoint accuracy in different testing setups. Sturdy strain relief at both ends supports a reliable connection that you can rest assured will go the distance.
Features &amp; Benefits
• Compatible with instruments that accept standard 4mm shrouded banana plugs, so it's a versatile piece of kit 
• CAT IV 600V rating indicates it can withstand voltage surges of up to 8000V, for reliable user safety 
• Double silicone insulation is resistant to oil and solvent damage, for a longer service life 
• Probes always display the correct category rating for the tip exposure used, giving you added peace of mind
Applications
• Household outlets 
• Switch testing 
• Manufacturing facilities 
• Automotive industry 
&nbsp;

TL175 Data Sheet

Instruction Sheet - TL175

fluke tl175 test lead kit, cat iii, iv, 10a kit kabel uji tl175, electrical power testing pengujian daya listrik petunjuk ujian tenaga elektrik fluke/福禄克 测试引线套件，cat iii、cat iv，10a 电力测试 福禄克

fluke-tl175-test-lead-kit-cat-iii-cat-iv-10a

The Fluke 787B ProcessMeter™ doubles your troubleshooting capabilities by combining the power of a safety rated digital multimeter and mA loop calibrator into a single, compact test tool. Based on the trusted measurement capabilities of the Fluke 87V meter, the 787B adds the ability to measure, source and simulate mA with the accuracy and resolution you would expect from a Fluke mA loop calibrator, giving you the ideal tool for troubleshooting and calibrating current loop applications. 

With Fluke Connect® mobile app and desktop software compatibility, technicians can wirelessly monitor, log, and share data from the field with their team anytime, from anywhere.* If you’re looking for even more troubleshooting power, the Fluke 789 ProcessMeter™ offers technicians even more flexibility, and even includes a built-in 24 V loop power supply.

*Requires Fluke IR3000FC module (not included). Not all models are available in all countries. Check with your local Fluke representative.

The Fluke 787B not only allows you to source, measure and simulate 20 mA DC current but also allows you simultaneously look at mA and percent of scale readouts so you can easily compare readings to what you see on your controller. Manually step mA signals (100%, 25%, Coarse adjustment, Fine adjustment) or use the Auto step and Auto ramp feature to work even more efficiently.

Designed to meet 1000 V IEC 61010 CAT III and 600 V CAT IV standards, the Fluke 787B is also a full-featured, precision, true-rms digital multimeter with standard features for diode testing and a continuity beeper. Troubleshoot more, while carrying less. The 787B also allows you to make frequency measurements to 20 kHz and includes Min/Max/Average/Hold/Relative modes for easy operation. Even the batteries and fuses are easily accessible allowing you to make fast, easy changes. 

Compact digital multimeter and mA loop calibrator solution

Measure/Source/Simulate loop currents while powering the loop

Manual and automatic ramp up – ramp down functions

Range and Resolution: 400.0 mV, 4.000 V, 40.00 V, 400.0 V, 1000 V

Range and Resolution: 1.000 A (0.440 A continuous)

Range and Resolution: 400.0 Ohms, 4.000 k, 40.00 k, 400.0 k, 4.0 M, 40 M

Range and Resolution: 199.99 Hz, 1999.9 Hz, 19.999 kHz

Range and Resolution: 2.000 V (shows diode voltage drop)

DC Current Output (Internal Battery Operation):


Range and Resolution: 0.000 to 20.000 mA or 4.000 to 20.000 mA (selectable at power-up), Over-range to 24.000 mA

Drive Capability: 24 V compliance or 1,200 ohms @ 20 mA

DC Current Simulate (External 15 V to 48 V Loop Supply):


Automatic: Slow Ramp, Fast Ramp, 25% step

Temperature Range: 18 °C to 28 °C, for one year after calibration

Maximum Voltage Applied Between Any Jack and Earth Ground: 1000 V RMS

Temperature Coefficient: 0.05 x (specified accuracy) per °C (for temperatures < 18 °C or > 28 °C)

Safety: IEC61010-1, Pollution Degree 2/IEC61010-2-033, CAT IV 600 V/CAT III 1000 V

Size (HxWxL): 50 x 100 x 203 mm (1.97 x 3.94 x 8.00 in)

<h3 class="md-block-header-three"> Fluke 787B Processmeter</h3>The Fluke 787B ProcessMeter™ doubles your troubleshooting capabilities by combining the power of a safety rated digital multimeter and mA loop calibrator into a single, compact test tool. Based on the trusted measurement capabilities of the Fluke 87V meter, the 787B adds the ability to measure, source and simulate mA with the accuracy and resolution you would expect from a Fluke mA loop calibrator, giving you the ideal tool for troubleshooting and calibrating current loop applications. With Fluke Connect® mobile app and desktop software compatibility, technicians can wirelessly monitor, log, and share data from the field with their team anytime, from anywhere.* If you’re looking for even more troubleshooting power, the Fluke 789 ProcessMeter™ offers technicians even more flexibility, and even includes a built-in 24 V loop power supply.*Requires Fluke IR3000FC module (not included). Not all models are available in all countries. Check with your local Fluke representative.Expand your troubleshooting capabilitiesThe Fluke 787B not only allows you to source, measure and simulate 20 mA DC current but also allows you simultaneously look at mA and percent of scale readouts so you can easily compare readings to what you see on your controller. Manually step mA signals (100%, 25%, Coarse adjustment, Fine adjustment) or use the Auto step and Auto ramp feature to work even more efficiently.Designed to meet 1000 V IEC 61010 CAT III and 600 V CAT IV standards, the Fluke 787B is also a full-featured, precision, true-rms digital multimeter with standard features for diode testing and a continuity beeper. Troubleshoot more, while carrying less. The 787B also allows you to make frequency measurements to 20 kHz and includes Min/Max/Average/Hold/Relative modes for easy operation. Even the batteries and fuses are easily accessible allowing you to make fast, easy changes. <ul class="md-block-unordered-list-item"><li>Compact digital multimeter and mA loop calibrator solution</li><li>Measure/Source/Simulate loop currents while powering the loop</li><li>Manual and automatic ramp up – ramp down functions</li><li>Easy-to-read backlit display </li></ul><h3 class="md-block-header-three">Measurement Function</h3><ul class="md-block-unordered-list-item"><li>V DC: </li><ul class="md-block-unordered-list-item"><li>Range and Resolution: 400.0 mV, 4.000 V, 40.00 V, 400.0 V, 1000 V</li><li>Best Accuracy: 0.1% + 1</li></ul><li>V AC (True-RMS): </li><ul class="md-block-unordered-list-item"><li>Range and Resolution: 400.0 mV, 4.000 V, 40.00 V, 400.0 V, 1000 V</li><li>Best Accuracy: 0.7% + 2</li></ul><li>mA DC: </li><ul class="md-block-unordered-list-item"><li>Range and Resolution: 30.000 mA</li><li>Best Accuracy: 0.05% + 2</li></ul><li>A DC: </li><ul class="md-block-unordered-list-item"><li>Range and Resolution: 1.000 A (0.440 A continuous)</li><li>Best Accuracy: 0.2% + 2</li></ul><li>A AC: </li><ul class="md-block-unordered-list-item"><li>Range and Resolution: 1.000 A (0.440 A continuous)</li><li>Best Accuracy: 1% + 2</li></ul><li>Resistance: </li><ul class="md-block-unordered-list-item"><li>Range and Resolution: 400.0 Ohms, 4.000 k, 40.00 k, 400.0 k, 4.0 M, 40 M</li><li>Best Accuracy: 0.2% + 1</li></ul><li>Frequency (0.5 Hz to 20 kHz): </li><ul class="md-block-unordered-list-item"><li>Range and Resolution: 199.99 Hz, 1999.9 Hz, 19.999 kHz</li><li>Best Accuracy: 0.005% + 1</li></ul><li>Diode Test: </li><ul class="md-block-unordered-list-item"><li>Range and Resolution: 2.000 V (shows diode voltage drop)</li><li>Best Accuracy: 2% + 1</li></ul><li>Continuity: </li><ul class="md-block-unordered-list-item"><li>Beeps for resistance &lt; approx. 100 ohms</li></ul></ul><h3 class="md-block-header-three">Output Function</h3><ul class="md-block-unordered-list-item"><li>DC Current Output (Internal Battery Operation): </li><ul class="md-block-unordered-list-item"><li>Range and Resolution: 0.000 to 20.000 mA or 4.000 to 20.000 mA (selectable at power-up), Over-range to 24.000 mA</li><li>Drive Capability: 24 V compliance or 1,200 ohms @ 20 mA</li><li>Accuracy: 0.05%</li></ul><li>DC Current Simulate (External 15 V to 48 V Loop Supply): </li><ul class="md-block-unordered-list-item"><li>Range and Resolution: 0.000 to 20.000 mA or 4.000 to 20.000 mA (selectable at power-up), Over-range to 24.000 mA</li><li>Drive Capability: 1000 ohms @ 20 mA</li><li>Accuracy: 0.05%</li></ul><li>Current Adjustment Modes: </li><ul class="md-block-unordered-list-item"><li>Manual: Coarse, Fine, 25% and 100% step</li><li>Automatic: Slow Ramp, Fast Ramp, 25% step</li></ul></ul><h3 class="md-block-header-three">Temperature Range</h3><ul class="md-block-unordered-list-item"><li>Temperature Range: 18 °C to 28 °C, for one year after calibration</li></ul><h3 class="md-block-header-three">General Specifications</h3><ul class="md-block-unordered-list-item"><li>Maximum Voltage Applied Between Any Jack and Earth Ground: 1000 V RMS</li><li>Storage Temperature: -40 °C to 60 °C</li><li>Operating Temperature: -20 °C to 55 °C</li><li>Temperature Coefficient: 0.05 x (specified accuracy) per °C (for temperatures &lt; 18 °C or &gt; 28 °C)</li><li>Relative Humidity: </li><ul class="md-block-unordered-list-item"><li>95% up to 30 °C</li><li>75% up to 40 °C</li><li>45% up to 50 °C</li><li>35% up to 55 °C</li></ul><li>Vibration: Random, 2 g, 5-500 Hz</li><li>Shock: 1 meter drop test</li><li>Safety: IEC61010-1, Pollution Degree 2/IEC61010-2-033, CAT IV 600 V/CAT III 1000 V</li><li>Size (HxWxL): 50 x 100 x 203 mm (1.97 x 3.94 x 8.00 in)</li><li>Weight: 600 g (1.3 lbs)</li><li>Battery: Four AA alkaline batteries</li><li>Battery Life: </li><ul class="md-block-unordered-list-item"><li>140 hours typical (measurement)</li><li>10 hours typical (sourcing 12 mA)</li></ul><li>Warranty: Three years</li></ul>

<h3> Fluke 787B Processmeter</h3>
The Fluke 787B ProcessMeter™ doubles your troubleshooting capabilities by combining the power of a safety rated digital multimeter and mA loop calibrator into a single, compact test tool. Based on the trusted measurement capabilities of the Fluke 87V meter, the 787B adds the ability to measure, source and simulate mA with the accuracy and resolution you would expect from a Fluke mA loop calibrator, giving you the ideal tool for troubleshooting and calibrating current loop applications.&nbsp;
With Fluke Connect® mobile app and desktop software compatibility, technicians can wirelessly monitor, log, and share data from the field with their team anytime, from anywhere.* If you’re looking for even more troubleshooting power, the Fluke 789 ProcessMeter™ offers technicians even more flexibility, and even includes a built-in 24 V loop power supply.
*Requires Fluke IR3000FC module (not included). Not all models are available in all countries. Check with your local Fluke representative.
Expand your troubleshooting capabilities
The Fluke 787B not only allows you to source, measure and simulate 20 mA DC current but also allows you simultaneously look at mA and percent of scale readouts so you can easily compare readings to what you see on your controller. Manually step mA signals (100%, 25%, Coarse adjustment, Fine adjustment) or use the Auto step and Auto ramp feature to work even more efficiently.
Designed to meet 1000 V IEC 61010 CAT III and 600 V CAT IV standards, the Fluke 787B is also a full-featured, precision, true-rms digital multimeter with standard features for diode testing and a continuity beeper. Troubleshoot more, while carrying less. The 787B also allows you to make frequency measurements to 20 kHz and includes Min/Max/Average/Hold/Relative modes for easy operation. Even the batteries and fuses are easily accessible allowing you to make fast, easy changes.&nbsp;
<ul>
<li>Compact digital multimeter and mA loop calibrator solution</li>
<li>Measure/Source/Simulate loop currents while powering the loop</li>
<li>Manual and automatic ramp up – ramp down functions</li>
<li>Easy-to-read backlit display&nbsp;</li>
</ul>
<h3>Measurement Function</h3>
<ul>
<li>V DC: 
</li>
<ul>
<li>Range and Resolution: 400.0 mV, 4.000 V, 40.00 V, 400.0 V, 1000 V</li>
<li>Best Accuracy: 0.1% + 1</li>
</ul>
<li>V AC (True-RMS): 
</li>
<ul>
<li>Range and Resolution: 400.0 mV, 4.000 V, 40.00 V, 400.0 V, 1000 V</li>
<li>Best Accuracy: 0.7% + 2</li>
</ul>
<li>mA DC: 
</li>
<ul>
<li>Range and Resolution: 30.000 mA</li>
<li>Best Accuracy: 0.05% + 2</li>
</ul>
<li>A DC: 
</li>
<ul>
<li>Range and Resolution: 1.000 A (0.440 A continuous)</li>
<li>Best Accuracy: 0.2% + 2</li>
</ul>
<li>A AC: 
</li>
<ul>
<li>Range and Resolution: 1.000 A (0.440 A continuous)</li>
<li>Best Accuracy: 1% + 2</li>
</ul>
<li>Resistance: 
</li>
<ul>
<li>Range and Resolution: 400.0 Ohms, 4.000 k, 40.00 k, 400.0 k, 4.0 M, 40 M</li>
<li>Best Accuracy: 0.2% + 1</li>
</ul>
<li>Frequency (0.5 Hz to 20 kHz): 
</li>
<ul>
<li>Range and Resolution: 199.99 Hz, 1999.9 Hz, 19.999 kHz</li>
<li>Best Accuracy: 0.005% + 1</li>
</ul>
<li>Diode Test: 
</li>
<ul>
<li>Range and Resolution: 2.000 V (shows diode voltage drop)</li>
<li>Best Accuracy: 2% + 1</li>
</ul>
<li>Continuity: 
</li>
<ul>
<li>Beeps for resistance &lt; approx. 100 ohms</li>
</ul>
</ul>
<h3>Output Function</h3>
<ul>
<li>DC Current Output (Internal Battery Operation): 
</li>
<ul>
<li>Range and Resolution: 0.000 to 20.000 mA or 4.000 to 20.000 mA (selectable at power-up), Over-range to 24.000 mA</li>
<li>Drive Capability: 24 V compliance or 1,200 ohms @ 20 mA</li>
<li>Accuracy: 0.05%</li>
</ul>
<li>DC Current Simulate (External 15 V to 48 V Loop Supply): 
</li>
<ul>
<li>Range and Resolution: 0.000 to 20.000 mA or 4.000 to 20.000 mA (selectable at power-up), Over-range to 24.000 mA</li>
<li>Drive Capability: 1000 ohms @ 20 mA</li>
<li>Accuracy: 0.05%</li>
</ul>
<li>Current Adjustment Modes: 
</li>
<ul>
<li>Manual: Coarse, Fine, 25% and 100% step</li>
<li>Automatic: Slow Ramp, Fast Ramp, 25% step</li>
</ul>
</ul>
<h3>Temperature Range</h3>
<ul>
<li>Temperature Range: 18 °C to 28 °C, for one year after calibration</li>
</ul>
<h3>General Specifications</h3>
<ul>
<li>Maximum Voltage Applied Between Any Jack and Earth Ground: 1000 V RMS</li>
<li>Storage Temperature: -40 °C to 60 °C</li>
<li>Operating Temperature: -20 °C to 55 °C</li>
<li>Temperature Coefficient: 0.05 x (specified accuracy) per °C (for temperatures &lt; 18 °C or &gt; 28 °C)</li>
<li>Relative Humidity: 
</li>
<ul>
<li>95% up to 30 °C</li>
<li>75% up to 40 °C</li>
<li>45% up to 50 °C</li>
<li>35% up to 55 °C</li>
</ul>
<li>Vibration: Random, 2 g, 5-500 Hz</li>
<li>Shock: 1 meter drop test</li>
<li>Safety: IEC61010-1, Pollution Degree 2/IEC61010-2-033, CAT IV 600 V/CAT III 1000 V</li>
<li>Size (HxWxL): 50 x 100 x 203 mm (1.97 x 3.94 x 8.00 in)</li>
<li>Weight: 600 g (1.3 lbs)</li>
<li>Battery: Four AA alkaline batteries</li>
<li>Battery Life: 
</li>
<ul>
<li>140 hours typical (measurement)</li>
<li>10 hours typical (sourcing 12 mA)</li>
</ul>
<li>Warranty: Three years</li>
</ul>

Fluke 787B Processmeter

fluke 787b processmeter pengukur proses calibrators fluke/福禄克 过程仪表 福禄克

fluke-787b-processmeter

 Brought to you by Fluke, a range of accessories including test leads and probes, suitable exclusively for Fluke Multimeters. Whether it's a test lead set or a probe set, dependent on the application, both types will add a sense of reliability to the intended application. All models are highly reliable and excellent quality.


Designed for electrical and electronic tests in industrial environments.
SureGrip™ crocodile clips, wire grips, hook clips and industrial test probes ensure reliable contact with the various test points.
Strap with magnet so you can hang your digital multimeter conveniently on a metal surface.
Adapter with K type thermocouple for measuring temperature directly using the thermometry functions of your digital multimeter.
Protective bag for your digital multimeter and all its accessories.


These leads are connecting cables which are used specifically for Multimeters, attaching a test probe to the end will allow the user to measure the required voltage, current or electrical resistance. As it assists operation with a multimeter, at least two of these types of electrical values are measured.


Connecting to Fluke multimeters, a set of test probes will measure the device or target for an accurate reading, such as voltage or current. Due to the flexibility and quality produced by Fluke, each probe provides much-needed precision.


FLUKE Test Lead Kit, For Digital Multimeter, Soft Carry Case - TLK289

Get a grip on your electronic development with this test lead kit from FLUKE. It provides leads, probes and clips in one case to help you keep essential device testing tools close at hand. Thanks to its shrouded probe tips that extend between 4 and 19mm, the set adapts to minimise your exposure to hazardous electrical loads. The kit's magnetic hanger holds multimeters (156-730) tight to many surfaces for hands-free monitoring. Measuring extreme conditions is no issue for this product, as its thermocouple makes light work of temperatures between -40°C and +260°C.


• Alligator clips open up to 20mm diameter, making it easy to test many kinds of conductor
• Rubber probe grips to ensure steady handling even in slippery conditions
• Durable silicone test lead insulation, protecting sensitive elements against heat and moisture
• Test lead length of 1.5m for convenient testing in remote areas
• Supplied in a soft case with moveable divider for handy organisation


• Power plants
• Building management
• Manufacturing industry


How do I adjust the shrouds on this product's test probes?

The set's probes extend and retract their shrouds with easy twist motions, giving you close control over the exposed tip length. 

<h3 class="md-block-header-three">Fluke TLK289 Industrial Test Lead Kit</h3> Brought to you by Fluke, a range of accessories including test leads and probes, suitable exclusively for Fluke Multimeters. Whether it&#x27;s a test lead set or a probe set, dependent on the application, both types will add a sense of reliability to the intended application. All models are highly reliable and excellent quality. <h3 class="md-block-header-three">Features and Benefits</h3>Designed for electrical and electronic tests in industrial environments. SureGrip™ crocodile clips, wire grips, hook clips and industrial test probes ensure reliable contact with the various test points. Strap with magnet so you can hang your digital multimeter conveniently on a metal surface. Adapter with K type thermocouple for measuring temperature directly using the thermometry functions of your digital multimeter. Protective bag for your digital multimeter and all its accessories. <h3 class="md-block-header-three">What are test leads?</h3>These leads are connecting cables which are used specifically for Multimeters, attaching a test probe to the end will allow the user to measure the required voltage, current or electrical resistance. As it assists operation with a multimeter, at least two of these types of electrical values are measured. <h3 class="md-block-header-three">What are test probes?</h3>Connecting to Fluke multimeters, a set of test probes will measure the device or target for an accurate reading, such as voltage or current. Due to the flexibility and quality produced by Fluke, each probe provides much-needed precision. <h3 class="md-block-header-three">FLUKE Test Lead Kit, For Digital Multimeter, Soft Carry Case - TLK289</h3>Get a grip on your electronic development with this test lead kit from FLUKE. It provides leads, probes and clips in one case to help you keep essential device testing tools close at hand. Thanks to its shrouded probe tips that extend between 4 and 19mm, the set adapts to minimise your exposure to hazardous electrical loads. The kit&#x27;s magnetic hanger holds multimeters (156-730) tight to many surfaces for hands-free monitoring. Measuring extreme conditions is no issue for this product, as its thermocouple makes light work of temperatures between -40°C and +260°C. <h3 class="md-block-header-three">Features &amp; Benefits</h3>• Alligator clips open up to 20mm diameter, making it easy to test many kinds of conductor • Rubber probe grips to ensure steady handling even in slippery conditions • Durable silicone test lead insulation, protecting sensitive elements against heat and moisture • Test lead length of 1.5m for convenient testing in remote areas • Supplied in a soft case with moveable divider for handy organisation <h3 class="md-block-header-three">Applications</h3>• Power plants • Building management • Manufacturing industry <h3 class="md-block-header-three">How do I adjust the shrouds on this product&#x27;s test probes?</h3>The set&#x27;s probes extend and retract their shrouds with easy twist motions, giving you close control over the exposed tip length.

<h3>Fluke TLK289 Industrial Test Lead Kit</h3>
&nbsp;Brought to you by Fluke, a range of accessories including test leads and probes, suitable exclusively for Fluke Multimeters. Whether it's a test lead set or a probe set, dependent on the application, both types will add a sense of reliability to the intended application. All models are highly reliable and excellent quality. 

<h3>Features and Benefits</h3>
Designed for electrical and electronic tests in industrial environments. 
SureGrip™ crocodile clips, wire grips, hook clips and industrial test probes ensure reliable contact with the various test points. 
Strap with magnet so you can hang your digital multimeter conveniently on a metal surface. 
Adapter with K type thermocouple for measuring temperature directly using the thermometry functions of your digital multimeter. 
Protective bag for your digital multimeter and all its accessories. 

<h3>What are test leads?</h3>
These leads are connecting cables which are used specifically for Multimeters, attaching a test probe to the end will allow the user to measure the required voltage, current or electrical resistance. As it assists operation with a multimeter, at least two of these types of electrical values are measured. 

<h3>What are test probes?</h3>
Connecting to Fluke multimeters, a set of test probes will measure the device or target for an accurate reading, such as voltage or current. Due to the flexibility and quality produced by Fluke, each probe provides much-needed precision. 

<h3>FLUKE Test Lead Kit, For Digital Multimeter, Soft Carry Case - TLK289</h3>
Get a grip on your electronic development with this test lead kit from FLUKE. It provides leads, probes and clips in one case to help you keep essential device testing tools close at hand. Thanks to its shrouded probe tips that extend between 4 and 19mm, the set adapts to minimise your exposure to hazardous electrical loads. The kit's magnetic hanger holds multimeters (156-730) tight to many surfaces for hands-free monitoring. Measuring extreme conditions is no issue for this product, as its thermocouple makes light work of temperatures between -40°C and +260°C. 

<h3>Features &amp; Benefits</h3>
• Alligator clips open up to 20mm diameter, making it easy to test many kinds of conductor 
• Rubber probe grips to ensure steady handling even in slippery conditions 
• Durable silicone test lead insulation, protecting sensitive elements against heat and moisture 
• Test lead length of 1.5m for convenient testing in remote areas 
• Supplied in a soft case with moveable divider for handy organisation 

<h3>Applications</h3>
• Power plants 
• Building management 
• Manufacturing industry 

<h3>How do I adjust the shrouds on this product's test probes?</h3>
The set's probes extend and retract their shrouds with easy twist motions, giving you close control over the exposed tip length.&nbsp;

Fluke TLK289 Industrial Test Lead Kit

fluke tlk289 industrial test lead kit kabel uji industri electrical power testing pengujian daya listrik utama ujian perindustrian tenaga elektrik fluke/福禄克 工业测试引线套件 电力测试 福禄克