FLUKE

Test & Measurement

test-measurement

Multimeter Leads

multimeter-leads

Multimeters

multimeters

Fluke 87V Industrial Multimeter (Not Required Calibration Service) 

-Easy-access door for fast battery changes without breaking the calibration seal
-Analog bar graph for fast changing or unstable signals
-Large digit display with bright, two-level backlight for easier reading in low light
-Touch Hold keeps readings on display even after removing probes

The 87V lets you identify complex electrical problems fast. It supports accurate measurements on VFDs using a low-pass filter. The meter also captures intermittents as fast as 250 µS using Peak Capture. High-frequency, high-energy noise generated by large drive systems is blocked from your measurements with specially designed shielding.

Built to highest safety standards
All the inputs in the 87V are updated to the third edition of the EN 61010-1 to CAT III 1000 V and CAT IV 600 V. The meter is designed to withstand spikes of more than 8000 V. You also benefit from an audible Input Alert warning if the test leads are placed in the incorrect input jacks for the measurement being made.

Removable holster with built in test lead and probe storage for convenience
The 87V has a removeable holster that also holds a test probe during testing for easier viewing. Relative mode lets you remove test lead resistance, improving accuracy of low-resistance measurements. To make your life even easier, the 87V fits into an optional magnetic hanger for easy set-up and viewing while freeing your hands for other tasks.

<h3 class="md-block-header-three">Fluke 87V Industrial Multimeter (Not Required Calibration Service) </h3>-Easy-access door for fast battery changes without breaking the calibration seal -Analog bar graph for fast changing or unstable signals -Large digit display with bright, two-level backlight for easier reading in low light -Touch Hold keeps readings on display even after removing probesThe 87V lets you identify complex electrical problems fast. It supports accurate measurements on VFDs using a low-pass filter. The meter also captures intermittents as fast as 250 µS using Peak Capture. High-frequency, high-energy noise generated by large drive systems is blocked from your measurements with specially designed shielding.Built to highest safety standards All the inputs in the 87V are updated to the third edition of the EN 61010-1 to CAT III 1000 V and CAT IV 600 V. The meter is designed to withstand spikes of more than 8000 V. You also benefit from an audible Input Alert warning if the test leads are placed in the incorrect input jacks for the measurement being made.Removable holster with built in test lead and probe storage for convenience The 87V has a removeable holster that also holds a test probe during testing for easier viewing. Relative mode lets you remove test lead resistance, improving accuracy of low-resistance measurements. To make your life even easier, the 87V fits into an optional magnetic hanger for easy set-up and viewing while freeing your hands for other tasks.

<h3>Fluke 87V Industrial Multimeter (Not Required Calibration Service)&nbsp;</h3>
-Easy-access door for fast battery changes without breaking the calibration seal 
-Analog bar graph for fast changing or unstable signals 
-Large digit display with bright, two-level backlight for easier reading in low light 
-Touch Hold keeps readings on display even after removing probes
The 87V lets you identify complex electrical problems fast. It supports accurate measurements on VFDs using a low-pass filter. The meter also captures intermittents as fast as 250 µS using Peak Capture. High-frequency, high-energy noise generated by large drive systems is blocked from your measurements with specially designed shielding.
Built to highest safety standards 
All the inputs in the 87V are updated to the third edition of the EN 61010-1 to CAT III 1000 V and CAT IV 600 V. The meter is designed to withstand spikes of more than 8000 V. You also benefit from an audible Input Alert warning if the test leads are placed in the incorrect input jacks for the measurement being made.
Removable holster with built in test lead and probe storage for convenience 
The 87V has a removeable holster that also holds a test probe during testing for easier viewing. Relative mode lets you remove test lead resistance, improving accuracy of low-resistance measurements. To make your life even easier, the 87V fits into an optional magnetic hanger for easy set-up and viewing while freeing your hands for other tasks.

Data Sheet

CETM

Fluke 87V Industrial Multimeter (not Required Calibration Service)

fluke 87v industrial multimeter (not required calibration service) industri (tidak diperlukan layanan kalibrasi) multimeters (bukan perkhidmatan penentukuran diperlukan) fluke/福禄克 工业万用表（无需校准服务） 万用表 福禄克

fluke-87v-industrial-multimeter-not-required-calibration-service

Fluke 87V Industrial Multimeter (Include Calibration Service) 

<h3 class="md-block-header-three">Fluke 87V Industrial Multimeter (Include Calibration Service) </h3>-Easy-access door for fast battery changes without breaking the calibration seal -Analog bar graph for fast changing or unstable signals -Large digit display with bright, two-level backlight for easier reading in low light -Touch Hold keeps readings on display even after removing probesThe 87V lets you identify complex electrical problems fast. It supports accurate measurements on VFDs using a low-pass filter. The meter also captures intermittents as fast as 250 µS using Peak Capture. High-frequency, high-energy noise generated by large drive systems is blocked from your measurements with specially designed shielding.Built to highest safety standards All the inputs in the 87V are updated to the third edition of the EN 61010-1 to CAT III 1000 V and CAT IV 600 V. The meter is designed to withstand spikes of more than 8000 V. You also benefit from an audible Input Alert warning if the test leads are placed in the incorrect input jacks for the measurement being made.Removable holster with built in test lead and probe storage for convenience The 87V has a removeable holster that also holds a test probe during testing for easier viewing. Relative mode lets you remove test lead resistance, improving accuracy of low-resistance measurements. To make your life even easier, the 87V fits into an optional magnetic hanger for easy set-up and viewing while freeing your hands for other tasks.

<h3>Fluke 87V Industrial Multimeter (Include Calibration Service)&nbsp;</h3>
-Easy-access door for fast battery changes without breaking the calibration seal 
-Analog bar graph for fast changing or unstable signals 
-Large digit display with bright, two-level backlight for easier reading in low light 
-Touch Hold keeps readings on display even after removing probes
The 87V lets you identify complex electrical problems fast. It supports accurate measurements on VFDs using a low-pass filter. The meter also captures intermittents as fast as 250 µS using Peak Capture. High-frequency, high-energy noise generated by large drive systems is blocked from your measurements with specially designed shielding.
Built to highest safety standards 
All the inputs in the 87V are updated to the third edition of the EN 61010-1 to CAT III 1000 V and CAT IV 600 V. The meter is designed to withstand spikes of more than 8000 V. You also benefit from an audible Input Alert warning if the test leads are placed in the incorrect input jacks for the measurement being made.
Removable holster with built in test lead and probe storage for convenience 
The 87V has a removeable holster that also holds a test probe during testing for easier viewing. Relative mode lets you remove test lead resistance, improving accuracy of low-resistance measurements. To make your life even easier, the 87V fits into an optional magnetic hanger for easy set-up and viewing while freeing your hands for other tasks.

Fluke 87V Industrial Multimeter (include Calibration Service)

fluke 87v industrial multimeter (include calibration service) industri (termasuk layanan kalibrasi) multimeters perkhidmatan penentukuran) fluke/福禄克 工业万用表（含校准服务） 万用表 福禄克

fluke-87v-industrial-multimeter-include-calibration-service

Kit Contents	80BK Temperature Probe, 87V Multimeter, 9V Battery, Case - C35, Crocodile Clips - AC220 Long Reach, Documentation, Magnetic Meter Hanger - TPAK ToolPak Kit, Test Leads - TL224 SureGrip Silicone, Test Probes - TP238

 Based around the Fluke 87V this kit includes special accessories that make industrial trouble shooting even more productive.

The Fluke 87V true-RMS multimeter has improved measurement functions and troubleshooting features. Also featuring improved resolutions and accuracy, it has more problem-solving power, convenience, safety and impact protection than its predecessor the Fluke 87. With a two-level back-light this digital multimeter is easy to read even in the darkest of environments.

The combo multimeter kit makes troubleshooting more productive with additional features such as the 1.5m heat resistant silicone test leads. Removable test probes which have 4mm exposed metal for use on industrial circuits and retractable long reach alligator clips. An innovative meter hanging magnetic accessory assists with hands free operation. All of this alongside a soft case to ensure safe storage and device protection.

• New and improved 87V multimeter
• Built-in thermometer
• Large digit display - two level back-light
• Unique function for accurate voltage and frequency measurements on adjustable speed motor drives and other electrical noisy equipment

Fluke 87V, Suregrip™ alligator clip set, a lightweight soft carry case, Suregrip™ silicone test lead set, integrated DMM probe (type K), Suregrip™ slim reach test probe set and a magnetic hanger.

All inputs are protected to Category III, 1000 V and Category IV 600 V. They can withstand impulses in excess of 8,000V and reduce risks related to surges and spikes.

FLUKE Multimeter Kit, 10A AC/DC Maximum Current Measurement, 200kHz Maximum Frequency Measurement - 87 Series - FLUKE 87V/E2

Need an easy way to take multiple electrical measurements? Choose this multimeter kit from FLUKE to gather info on current, voltage, resistance and capacitance. Its fully insulated test leads have 3mm of exposed metal, so they're safe to use in industrial settings. The attachable alligator clips let you fix the cables temporarily, freeing up your hands while you take readings. This product comes with a thermocouple probe that can read temperatures between -200°C and +1090°C, so it's highly versatile. Its large-digit display is backlit, which means it's easy to read in dark spots.

• Broad operating temperature range between -20°C and +55°C so it handles the demands of harsh settings
• Carrying case included for safe storage when you're on the go
• Integrated analogue bar graph lets you easily read unstable or fast-changing signals
• Kit includes a magnetic hanger for convenient hands-free use

• Industrial automation
• Power distribution
• Motor drives 

<h3 class="md-block-header-three">Fluke 87V/E2 Multimeter Kit</h3><ul class="md-block-unordered-list-item"><li>Model Number	87/E2</li><li>Application	Industrial</li><li>Kit Contents	80BK Temperature Probe, 87V Multimeter, 9V Battery, Case - C35, Crocodile Clips - AC220 Long Reach, Documentation, Magnetic Meter Hanger - TPAK ToolPak Kit, Test Leads - TL224 SureGrip Silicone, Test Probes - TP238</li><li>Dimensions	201 x 98 x 52mm</li></ul> Based around the Fluke 87V this kit includes special accessories that make industrial trouble shooting even more productive.The Fluke 87V true-RMS multimeter has improved measurement functions and troubleshooting features. Also featuring improved resolutions and accuracy, it has more problem-solving power, convenience, safety and impact protection than its predecessor the Fluke 87. With a two-level back-light this digital multimeter is easy to read even in the darkest of environments.The combo multimeter kit makes troubleshooting more productive with additional features such as the 1.5m heat resistant silicone test leads. Removable test probes which have 4mm exposed metal for use on industrial circuits and retractable long reach alligator clips. An innovative meter hanging magnetic accessory assists with hands free operation. All of this alongside a soft case to ensure safe storage and device protection.Features and Benefits:• New and improved 87V multimeter • Built-in thermometer • Large digit display - two level back-light • Unique function for accurate voltage and frequency measurements on adjustable speed motor drives and other electrical noisy equipmentKit includes:Fluke 87V, Suregrip™ alligator clip set, a lightweight soft carry case, Suregrip™ silicone test lead set, integrated DMM probe (type K), Suregrip™ slim reach test probe set and a magnetic hanger.All inputs are protected to Category III, 1000 V and Category IV 600 V. They can withstand impulses in excess of 8,000V and reduce risks related to surges and spikes.FLUKE Multimeter Kit, 10A AC/DC Maximum Current Measurement, 200kHz Maximum Frequency Measurement - 87 Series - FLUKE 87V/E2Need an easy way to take multiple electrical measurements? Choose this multimeter kit from FLUKE to gather info on current, voltage, resistance and capacitance. Its fully insulated test leads have 3mm of exposed metal, so they&#x27;re safe to use in industrial settings. The attachable alligator clips let you fix the cables temporarily, freeing up your hands while you take readings. This product comes with a thermocouple probe that can read temperatures between -200°C and +1090°C, so it&#x27;s highly versatile. Its large-digit display is backlit, which means it&#x27;s easy to read in dark spots.Features &amp; Benefits• Broad operating temperature range between -20°C and +55°C so it handles the demands of harsh settings • Carrying case included for safe storage when you&#x27;re on the go • Integrated analogue bar graph lets you easily read unstable or fast-changing signals • Kit includes a magnetic hanger for convenient hands-free useApplications• Industrial automation • Power distribution • Motor drives

<h3>Fluke 87V/E2 Multimeter Kit</h3>
<ul>
<li>Model Number	87/E2</li>
<li>Application	Industrial</li>
<li>Kit Contents	80BK Temperature Probe, 87V Multimeter, 9V Battery, Case - C35, Crocodile Clips - AC220 Long Reach, Documentation, Magnetic Meter Hanger - TPAK ToolPak Kit, Test Leads - TL224 SureGrip Silicone, Test Probes - TP238</li>
<li>Dimensions	201 x 98 x 52mm</li>
</ul>
&nbsp;Based around the Fluke 87V this kit includes special accessories that make industrial trouble shooting even more productive.
The Fluke 87V true-RMS multimeter has improved measurement functions and troubleshooting features. Also featuring improved resolutions and accuracy, it has more problem-solving power, convenience, safety and impact protection than its predecessor the Fluke 87. With a two-level back-light this digital multimeter is easy to read even in the darkest of environments.
The combo multimeter kit makes troubleshooting more productive with additional features such as the 1.5m heat resistant silicone test leads. Removable test probes which have 4mm exposed metal for use on industrial circuits and retractable long reach alligator clips. An innovative meter hanging magnetic accessory assists with hands free operation. All of this alongside a soft case to ensure safe storage and device protection.
Features and Benefits:
• New and improved 87V multimeter 
• Built-in thermometer 
• Large digit display - two level back-light 
• Unique function for accurate voltage and frequency measurements on adjustable speed motor drives and other electrical noisy equipment
Kit includes:
Fluke 87V, Suregrip™ alligator clip set, a lightweight soft carry case, Suregrip™ silicone test lead set, integrated DMM probe (type K), Suregrip™ slim reach test probe set and a magnetic hanger.
All inputs are protected to Category III, 1000 V and Category IV 600 V. They can withstand impulses in excess of 8,000V and reduce risks related to surges and spikes.
FLUKE Multimeter Kit, 10A AC/DC Maximum Current Measurement, 200kHz Maximum Frequency Measurement - 87 Series - FLUKE 87V/E2
Need an easy way to take multiple electrical measurements? Choose this multimeter kit from FLUKE to gather info on current, voltage, resistance and capacitance. Its fully insulated test leads have 3mm of exposed metal, so they're safe to use in industrial settings. The attachable alligator clips let you fix the cables temporarily, freeing up your hands while you take readings. This product comes with a thermocouple probe that can read temperatures between -200°C and +1090°C, so it's highly versatile. Its large-digit display is backlit, which means it's easy to read in dark spots.
Features &amp; Benefits
• Broad operating temperature range between -20°C and +55°C so it handles the demands of harsh settings 
• Carrying case included for safe storage when you're on the go 
• Integrated analogue bar graph lets you easily read unstable or fast-changing signals 
• Kit includes a magnetic hanger for convenient hands-free use
Applications
• Industrial automation 
• Power distribution 
• Motor drives&nbsp;

Fluke 87V/E2 Industrial Electrician Combo Kit

80 Series V Multimeters Users Manual

80 Series V Industrial True-RMS Multimeter with Temperature Data Sheet

RS Pro

SCHNEIDER ELECTRIC

Fluke Networks

Abus

Screw

O Ring

Surface Mount Resistors

Circular Connectors

Contactors

Bolts

Panel Mount Indicators 

Molded Case Circuit Breakers - MCCBs

Junction & Enclosure Box

Electrical Wire 

RS Components ETH SG

buyerIntroduction

Fluke 87V/E2 Multimeter Kit

fluke 87v/e2 multimeter kit multimeters fluke/福禄克 万用表套件 万用表 福禄克

fluke-87v-e2-multimeter-kit

Fluke 87V-MAX Handheld Digital Multimeter, True Rms, 10A Ac Max, 10A Dc Max, 1000V Ac Max

 Need to take measurements in challenging conditions? Slip this handheld multimeter from FLUKE in your toolbelt and you're ready to get on with the job. It measures current, voltage and resistance, so you can easily pick up faults in your system. The unit's built to take harsh conditions in its stride. You can use it in areas with humidity levels of up to 95% and it resists damage even when it falls from 4m. Thanks to a wide operating temperature range of -200°C to +1090°C, this is a solid choice that can handle industrial extremes.


• IP67 rating shows it's protected from dust and is waterproof up to a depth of 1m
• Compact dimensions of 6.35 (H) x 10.0 (W) x 19.81cm (L) for comfortable portability
• Rubber holster included for easy use
• Long battery life of 800 hours, so you won't lose power at a critical moment


• Electrical appliances testing
• Battery fault detection
• Plug point maintenance


This versatile unit measures alternating or direct currents from 0.1μA to 10A with voltages of between 0.1mV and 1000V. You can also use it to measure resistance between 0.1Ω and 50MΩ.


Fluke 87V MAX True-rms Digital Multimeter

The 87V MAX contains all the trusted features of the the Fluke 87V, plus much more.


Fluke’s most rugged digital multimeter. The 87V MAX is built with an industrial strength case and a removable holster. The holster doubles as a test probe holder for one-handed operation.


Fully waterproof and dust proof, to work reliably in all the places that you need to work. Withstands heat and cold and the meter has an extended operating temperature range of -40 °C (for up to 20 minutes) to +55 °C.


Withstands drops up to 4-meters (13 feet) with industrial strength casing and holster

Waterproof, dustproof case for the most extreme work sites (IP67 rated)

Double the battery life of the 87V (up to 800 hours), backlit keys for dark environments

True-rms ac voltage and current for accurate measurements on non-linear signals

Built-in thermometer conveniently allows you to take temperature readings without having to carry a separate instrument

Min/Max/Average recording, plus 250 μs Peak min-max to capture variations automatically

Unique function for accurate voltage and frequency measurements on variable frequency motor drives (VFDs) and other electrically noisy equipment

Large display digits, 2-level bright white backlight and backlit keypad buttons for increased visibility

Holster, TL175 TwistGuard® test leads, alligator clips, 80BK-A temperature probe, three AA batteries (installed) 

<h3 class="md-block-header-three">Fluke 87V-MAX Handheld Digital Multimeter, True Rms, 10A Ac Max, 10A Dc Max, 1000V Ac Max</h3> Need to take measurements in challenging conditions? Slip this handheld multimeter from FLUKE in your toolbelt and you&#x27;re ready to get on with the job. It measures current, voltage and resistance, so you can easily pick up faults in your system. The unit&#x27;s built to take harsh conditions in its stride. You can use it in areas with humidity levels of up to 95% and it resists damage even when it falls from 4m. Thanks to a wide operating temperature range of -200°C to +1090°C, this is a solid choice that can handle industrial extremes. <h3 class="md-block-header-three">Features &amp; Benefits</h3>• IP67 rating shows it&#x27;s protected from dust and is waterproof up to a depth of 1m • Compact dimensions of 6.35 (H) x 10.0 (W) x 19.81cm (L) for comfortable portability • Rubber holster included for easy use • Long battery life of 800 hours, so you won&#x27;t lose power at a critical moment <h3 class="md-block-header-three">Applications</h3>• Electrical appliances testing • Battery fault detection • Plug point maintenance <h3 class="md-block-header-three">What can I measure with this multimeter?</h3>This versatile unit measures alternating or direct currents from 0.1μA to 10A with voltages of between 0.1mV and 1000V. You can also use it to measure resistance between 0.1Ω and 50MΩ. <h3 class="md-block-header-three">Fluke 87V MAX True-rms Digital Multimeter</h3>The 87V MAX contains all the trusted features of the the Fluke 87V, plus much more. Fluke’s most rugged digital multimeter. The 87V MAX is built with an industrial strength case and a removable holster. The holster doubles as a test probe holder for one-handed operation. Fully waterproof and dust proof, to work reliably in all the places that you need to work. Withstands heat and cold and the meter has an extended operating temperature range of -40 °C (for up to 20 minutes) to +55 °C. <h3 class="md-block-header-three">Features and Benefits:</h3><ul class="md-block-unordered-list-item"><li>Withstands drops up to 4-meters (13 feet) with industrial strength casing and holster</li><li>Waterproof, dustproof case for the most extreme work sites (IP67 rated)</li><li>Premium TL175 TwistGuard™ test leads</li><li>Double the battery life of the 87V (up to 800 hours), backlit keys for dark environments</li><li>True-rms ac voltage and current for accurate measurements on non-linear signals</li><li>Measure up to 1000 V ac and dc</li><li>Measure up to 10 A (20 A for 30 seconds)</li><li>Frequency to 200 kHz</li><li>Built-in thermometer conveniently allows you to take temperature readings without having to carry a separate instrument</li><li>Min/Max/Average recording, plus 250 μs Peak min-max to capture variations automatically</li><li>Unique function for accurate voltage and frequency measurements on variable frequency motor drives (VFDs) and other electrically noisy equipment</li><li>Large display digits, 2-level bright white backlight and backlit keypad buttons for increased visibility</li><li>Hi resolution 19,999 count display mode</li><li>Long battery life (800 hours)</li></ul><h3 class="md-block-header-three">Contents</h3>Holster, TL175 TwistGuard® test leads, alligator clips, 80BK-A temperature probe, three AA batteries (installed)

<h3>Fluke 87V-MAX Handheld Digital Multimeter, True Rms, 10A Ac Max, 10A Dc Max, 1000V Ac Max</h3>
&nbsp;Need to take measurements in challenging conditions? Slip this handheld multimeter from FLUKE in your toolbelt and you're ready to get on with the job. It measures current, voltage and resistance, so you can easily pick up faults in your system. The unit's built to take harsh conditions in its stride. You can use it in areas with humidity levels of up to 95% and it resists damage even when it falls from 4m. Thanks to a wide operating temperature range of -200°C to +1090°C, this is a solid choice that can handle industrial extremes. 

<h3>Features &amp; Benefits</h3>
• IP67 rating shows it's protected from dust and is waterproof up to a depth of 1m 
• Compact dimensions of 6.35 (H) x 10.0 (W) x 19.81cm (L) for comfortable portability 
• Rubber holster included for easy use 
• Long battery life of 800 hours, so you won't lose power at a critical moment 

<h3>Applications</h3>
• Electrical appliances testing 
• Battery fault detection 
• Plug point maintenance 

<h3>What can I measure with this multimeter?</h3>
This versatile unit measures alternating or direct currents from 0.1μA to 10A with voltages of between 0.1mV and 1000V. You can also use it to measure resistance between 0.1Ω and 50MΩ. 

<h3>Fluke 87V MAX True-rms Digital Multimeter</h3>
The 87V MAX contains all the trusted features of the the Fluke 87V, plus much more. 

Fluke’s most rugged digital multimeter. The 87V MAX is built with an industrial strength case and a removable holster. The holster doubles as a test probe holder for one-handed operation. 

Fully waterproof and dust proof, to work reliably in all the places that you need to work. Withstands heat and cold and the meter has an extended operating temperature range of -40 °C (for up to 20 minutes) to +55 °C. 

<h3>Features and Benefits:</h3>
<ul>
<li>Withstands drops up to 4-meters (13 feet) with industrial strength casing and holster</li>
<li>Waterproof, dustproof case for the most extreme work sites (IP67 rated)</li>
<li>Premium TL175 TwistGuard™ test leads</li>
<li>Double the battery life of the 87V (up to 800 hours), backlit keys for dark environments</li>
<li>True-rms ac voltage and current for accurate measurements on non-linear signals</li>
<li>Measure up to 1000 V ac and dc</li>
<li>Measure up to 10 A (20 A for 30 seconds)</li>
<li>Frequency to 200 kHz</li>
<li>Built-in thermometer conveniently allows you to take temperature readings without having to carry a separate instrument</li>
<li>Min/Max/Average recording, plus 250 μs Peak min-max to capture variations automatically</li>
<li>Unique function for accurate voltage and frequency measurements on variable frequency motor drives (VFDs) and other electrically noisy equipment</li>
<li>Large display digits, 2-level bright white backlight and backlit keypad buttons for increased visibility</li>
<li>Hi resolution 19,999 count display mode</li>
<li>Long battery life (800 hours)</li>
</ul>
<h3>Contents</h3>
Holster, TL175 TwistGuard® test leads, alligator clips, 80BK-A temperature probe, three AA batteries (installed)&nbsp;

fluke 87v-max handheld digital multimeter, true rms, 10a ac max, dc 1000v max multimeter genggam 87v-max, maks, maks multimeters pegang tangan fluke/福禄克 手持式数字万用表，真有效值，最大交流 10a，最大直流 10a，最大交流 万用表 福禄克

fluke-87v-max-handheld-digital-multimeter-true-rms-10a-ac-max-10a-dc-max-1000v-ac-max

Fluke 87-V/CN Handheld Digital Multimeter, True Rms, 10A Ac Max, 10A Dc Max, 1000V Ac Max

Functions Measured	AC Current, AC Voltage, Capacitance, Continuity, DC Current, DC Voltage, Diode, Frequency, Resistance, Temperature

Absolute Maximum DC Current Measurement	10A dc

Absolute Maximum Resistance Measurement	50MΩ

Absolute Maximum DC Voltage Measurement	1000V dc

Absolute Maximum AC Current Measurement	10A ac

Absolute Maximum AC Voltage Measurement	1000V ac

Absolute Maximum Temperature Measurement	+1090°C

Absolute Maximum Capacitance Measurement	9.999F

AC Current Measurement Resolution	0.1µA ac

DC Current Measurement Resolution	0.1µA dc

DC Voltage Measurement Resolution	0.1mV dc

AC Voltage Measurement Resolution	0.1mV ac

Temperature Measurement Resolution	0.1°C

Best Capacitance Measurement Accuracy	±1% + 2 Digits

Best Temperature Measurement Accuracy	±1% + 1 °C

Best DC Current Accuracy	±0.2% + 2 Digits

Best DC Voltage Accuracy	±0.05% + 1 Digit

Best Resistance Measurement Accuracy	±1% + 3 Digits

The Fluke 87V industrial digital multimeter is designed to help identify complex signal problems fast. The 4.5 digits digital multimeter features true rms readings which will give you accurate results without the complications. The 87V digital handheld multimeter features the accuracy and resolution to troubleshoot on motor drives, plant automation, power distribution and electro-mechanical equipment in noisy, industrial, high energy environments as well as high altitude locations. The Fluke 87V digital multimeter also comes with a larger display screen with a bright, two level back light allowing you to view the analogue bar graphs and measurements in a dim working environment.

• Accurate measurements of noisy pulse-width modulated AC voltage at the VSD and the motor terminals
• Accurate frequency measurements on VSD
• Built-in thermometer and temperature probe
• Peak Min Max mode captures intermittents as fast as 250 μs
• Easy-to-read large digit display with bright, two-level backlight
• CAT III 1000V, CAT IV 600V safety rated

AC/DC voltage & current
Resistance
Voltage frequency
Diodes
Continuity
Capacitance
Temperature
Duty Cycle

• Dual display resolution – 6,000 counts (3-3/4 digits) or 20,000 counts (4-1/2 digits)
• True RMS AC voltage and current for accurate measurements on non-linear signals
• Selectable filter for accurate voltage and frequency measurements on motor drives
• 0.05% DC accuracy
• 4-1/2 digit mode for precise measurements (20,000 counts)
• Measure up to 1000 VAC and DC
• Measure up to 10 A, 20 A for up to 30 seconds
• Frequency to 200 kHz and % duty cycle
• Resistance, continuity and diode test
• 10,000 μF capacitance range for components and motor caps
• Min/Max-Average recording with Min/Max Alert to capture variations automatically
• Relative mode to remove test lead interference
• Auto and manual ranging for maximum flexibility
• Touch Hold to capture stable readings avoiding noisy signals
• Analogue bargraph for fast changing or unstable signals
• Input Alert provides audible warning against wrong use of input jacks

Correctly measure pulse-width modulated motor drive signals

The Fluke 87V digital multimeter takes the guesswork out of drive system troubleshooting. It includes a unique function for accurately measuring noisy at the VFD and at the motor terminals. Special shielding blocks high frequency, high-energy noise generated by large drive systems.

Does the Fluke 87 have auto turn off if left on?

Yes - Automatic power down if left unused when switched on to preserve battery life

For Calibrated articles - Accuracy is specified for 1 year after calibration, at operating temperatures of 18 °C to 28 °C, with relative humidity at 0 % to 90 %

TL75 test leads, AC175 alligator clips, yellow holster, 9V battery, temperature probe, user manual, operators guide

FLUKE Multimeter, Digital Display, +0.1°C Temperature Resolution - 80 Series - FLUKE-87-V/EUR

• Dimensions of 3.1 (H) x 8.6 (W) x 18.6cm (L) and a light weight of 355g make it easy to carry by hand
• Can assess between -200°C and +1090°C in temperature, making it suitable for use in extreme conditions
• AUTOHOLD function keeps stable readings on the screen for easy recording

• Plant automation
• Transportation industry
• Testing labs 

<h3 class="md-block-header-three">Fluke 87-V/CN Handheld Digital Multimeter, True Rms, 10A Ac Max, 10A Dc Max, 1000V Ac Max</h3><ul class="md-block-unordered-list-item"><li> Multimeter Type	Handheld</li><li>Display Type	Digital</li><li>Model Number p	87</li><li>Functions Measured	AC Current, AC Voltage, Capacitance, Continuity, DC Current, DC Voltage, Diode, Frequency, Resistance, Temperature</li><li>Absolute Maximum DC Current Measurement	10A dc</li><li>Absolute Maximum Resistance Measurement	50MΩ</li><li>Absolute Maximum DC Voltage Measurement	1000V dc</li><li>Absolute Maximum AC Current Measurement	10A ac</li><li>Absolute Maximum AC Voltage Measurement	1000V ac</li><li>Absolute Maximum Temperature Measurement	+1090°C</li><li>True RMS	Yes</li><li>Absolute Maximum Capacitance Measurement	9.999F</li><li>Maximum Frequency	20kHz</li><li>AC Current Measurement Resolution	0.1µA ac</li><li>DC Current Measurement Resolution	0.1µA dc</li><li>Resistance Measurement Resolution	100mΩ</li><li>DC Voltage Measurement Resolution	0.1mV dc</li><li>AC Voltage Measurement Resolution	0.1mV ac</li><li>Safety Category Level	CAT III, CAT IV</li><li>Temperature Measurement Resolution	0.1°C</li><li>Capacitance Measurement Resolution	10nF</li><li>Maximum Operating Temperature	+55°C</li><li>Width	86mm</li><li>Best AC Current Accuracy	±1% + 2 Digits</li><li>Best Capacitance Measurement Accuracy	±1% + 2 Digits</li><li>Best AC Voltage Accuracy	±2% + 4 Digits</li><li>Best Temperature Measurement Accuracy	±1% + 1 °C</li><li>Dimensions	186 x 86 x 31mm</li><li>Safety Category Voltage	664 V, 1000V</li><li>Best DC Current Accuracy	±0.2% + 2 Digits</li><li>Height	31mm</li><li>Minimum Operating Temperature	-20°C</li><li>Best DC Voltage Accuracy	±0.05% + 1 Digit</li><li>Length	186mm</li><li>Best Resistance Measurement Accuracy	±1% + 3 Digits</li><li>Battery Type	9V</li><li>Weight	355g</li></ul>The Fluke 87V industrial digital multimeter is designed to help identify complex signal problems fast. The 4.5 digits digital multimeter features true rms readings which will give you accurate results without the complications. The 87V digital handheld multimeter features the accuracy and resolution to troubleshoot on motor drives, plant automation, power distribution and electro-mechanical equipment in noisy, industrial, high energy environments as well as high altitude locations. The Fluke 87V digital multimeter also comes with a larger display screen with a bright, two level back light allowing you to view the analogue bar graphs and measurements in a dim working environment.Features &amp; Benefits• Accurate measurements of noisy pulse-width modulated AC voltage at the VSD and the motor terminals • Accurate frequency measurements on VSD • Built-in thermometer and temperature probe • Peak Min Max mode captures intermittents as fast as 250 μs • Easy-to-read large digit display with bright, two-level backlight • CAT III 1000V, CAT IV 600V safety ratedThe 87V digital multimeter measuresAC/DC voltage &amp; current Resistance Voltage frequency Diodes Continuity Capacitance Temperature Duty CycleAdditional Features• Dual display resolution – 6,000 counts (3-3/4 digits) or 20,000 counts (4-1/2 digits) • True RMS AC voltage and current for accurate measurements on non-linear signals • Selectable filter for accurate voltage and frequency measurements on motor drives • 0.05% DC accuracy • 4-1/2 digit mode for precise measurements (20,000 counts) • Measure up to 1000 VAC and DC • Measure up to 10 A, 20 A for up to 30 seconds • Frequency to 200 kHz and % duty cycle • Resistance, continuity and diode test • 10,000 μF capacitance range for components and motor caps • Min/Max-Average recording with Min/Max Alert to capture variations automatically • Relative mode to remove test lead interference • Auto and manual ranging for maximum flexibility • Touch Hold to capture stable readings avoiding noisy signals • Analogue bargraph for fast changing or unstable signals • Input Alert provides audible warning against wrong use of input jacksCorrectly measure pulse-width modulated motor drive signalsThe Fluke 87V digital multimeter takes the guesswork out of drive system troubleshooting. It includes a unique function for accurately measuring noisy at the VFD and at the motor terminals. Special shielding blocks high frequency, high-energy noise generated by large drive systems.Does the Fluke 87 have auto turn off if left on?Yes - Automatic power down if left unused when switched on to preserve battery lifeNoteFor Calibrated articles - Accuracy is specified for 1 year after calibration, at operating temperatures of 18 °C to 28 °C, with relative humidity at 0 % to 90 %Supplied withTL75 test leads, AC175 alligator clips, yellow holster, 9V battery, temperature probe, user manual, operators guideFLUKE Multimeter, Digital Display, +0.1°C Temperature Resolution - 80 Series - FLUKE-87-V/EURFeatures &amp; Benefits• Dimensions of 3.1 (H) x 8.6 (W) x 18.6cm (L) and a light weight of 355g make it easy to carry by hand • Can assess between -200°C and +1090°C in temperature, making it suitable for use in extreme conditions • AUTOHOLD function keeps stable readings on the screen for easy recordingApplications• Plant automation • Transportation industry • Testing labs

<h3>Fluke 87-V/CN Handheld Digital Multimeter, True Rms, 10A Ac Max, 10A Dc Max, 1000V Ac Max</h3>
<ul>
<li>&nbsp;Multimeter Type	Handheld</li>
<li>Display Type	Digital</li>
<li>Model Number p	87</li>
<li>Functions Measured	AC Current, AC Voltage, Capacitance, Continuity, DC Current, DC Voltage, Diode, Frequency, Resistance, Temperature</li>
<li>Absolute Maximum DC Current Measurement	10A dc</li>
<li>Absolute Maximum Resistance Measurement	50MΩ</li>
<li>Absolute Maximum DC Voltage Measurement	1000V dc</li>
<li>Absolute Maximum AC Current Measurement	10A ac</li>
<li>Absolute Maximum AC Voltage Measurement	1000V ac</li>
<li>Absolute Maximum Temperature Measurement	+1090°C</li>
<li>True RMS	Yes</li>
<li>Absolute Maximum Capacitance Measurement	9.999F</li>
<li>Maximum Frequency	20kHz</li>
<li>AC Current Measurement Resolution	0.1µA ac</li>
<li>DC Current Measurement Resolution	0.1µA dc</li>
<li>Resistance Measurement Resolution	100mΩ</li>
<li>DC Voltage Measurement Resolution	0.1mV dc</li>
<li>AC Voltage Measurement Resolution	0.1mV ac</li>
<li>Safety Category Level	CAT III, CAT IV</li>
<li>Temperature Measurement Resolution	0.1°C</li>
<li>Capacitance Measurement Resolution	10nF</li>
<li>Maximum Operating Temperature	+55°C</li>
<li>Width	86mm</li>
<li>Best AC Current Accuracy	±1% + 2 Digits</li>
<li>Best Capacitance Measurement Accuracy	±1% + 2 Digits</li>
<li>Best AC Voltage Accuracy	±2% + 4 Digits</li>
<li>Best Temperature Measurement Accuracy	±1% + 1 °C</li>
<li>Dimensions	186 x 86 x 31mm</li>
<li>Safety Category Voltage	664 V, 1000V</li>
<li>Best DC Current Accuracy	±0.2% + 2 Digits</li>
<li>Height	31mm</li>
<li>Minimum Operating Temperature	-20°C</li>
<li>Best DC Voltage Accuracy	±0.05% + 1 Digit</li>
<li>Length	186mm</li>
<li>Best Resistance Measurement Accuracy	±1% + 3 Digits</li>
<li>Battery Type	9V</li>
<li>Weight	355g</li>
</ul>
The Fluke 87V industrial digital multimeter is designed to help identify complex signal problems fast. The 4.5 digits digital multimeter features true rms readings which will give you accurate results without the complications. The 87V digital handheld multimeter features the accuracy and resolution to troubleshoot on motor drives, plant automation, power distribution and electro-mechanical equipment in noisy, industrial, high energy environments as well as high altitude locations. The Fluke 87V digital multimeter also comes with a larger display screen with a bright, two level back light allowing you to view the analogue bar graphs and measurements in a dim working environment.
Features &amp; Benefits
• Accurate measurements of noisy pulse-width modulated AC voltage at the VSD and the motor terminals 
• Accurate frequency measurements on VSD 
• Built-in thermometer and temperature probe 
• Peak Min Max mode captures intermittents as fast as 250 μs 
• Easy-to-read large digit display with bright, two-level backlight 
• CAT III 1000V, CAT IV 600V safety rated
The 87V digital multimeter measures
AC/DC voltage &amp; current 
Resistance 
Voltage frequency 
Diodes 
Continuity 
Capacitance 
Temperature 
Duty Cycle
Additional Features
• Dual display resolution – 6,000 counts (3-3/4 digits) or 20,000 counts (4-1/2 digits) 
• True RMS AC voltage and current for accurate measurements on non-linear signals 
• Selectable filter for accurate voltage and frequency measurements on motor drives 
• 0.05% DC accuracy 
• 4-1/2 digit mode for precise measurements (20,000 counts) 
• Measure up to 1000 VAC and DC 
• Measure up to 10 A, 20 A for up to 30 seconds 
• Frequency to 200 kHz and % duty cycle 
• Resistance, continuity and diode test 
• 10,000 μF capacitance range for components and motor caps 
• Min/Max-Average recording with Min/Max Alert to capture variations automatically 
• Relative mode to remove test lead interference 
• Auto and manual ranging for maximum flexibility 
• Touch Hold to capture stable readings avoiding noisy signals 
• Analogue bargraph for fast changing or unstable signals 
• Input Alert provides audible warning against wrong use of input jacks
Correctly measure pulse-width modulated motor drive signals
The Fluke 87V digital multimeter takes the guesswork out of drive system troubleshooting. It includes a unique function for accurately measuring noisy at the VFD and at the motor terminals. Special shielding blocks high frequency, high-energy noise generated by large drive systems.
Does the Fluke 87 have auto turn off if left on?
Yes - Automatic power down if left unused when switched on to preserve battery life
Note
For Calibrated articles - Accuracy is specified for 1 year after calibration, at operating temperatures of 18 °C to 28 °C, with relative humidity at 0 % to 90 %
Supplied with
TL75 test leads, AC175 alligator clips, yellow holster, 9V battery, temperature probe, user manual, operators guide
FLUKE Multimeter, Digital Display, +0.1°C Temperature Resolution - 80 Series - FLUKE-87-V/EUR
Features &amp; Benefits
• Dimensions of 3.1 (H) x 8.6 (W) x 18.6cm (L) and a light weight of 355g make it easy to carry by hand 
• Can assess between -200°C and +1090°C in temperature, making it suitable for use in extreme conditions 
• AUTOHOLD function keeps stable readings on the screen for easy recording
Applications
• Plant automation 
• Transportation industry 
• Testing labs&nbsp;

80 Series V Multimeter Quick Reference Guide

80 Series V Users Manual Supplement Issue: 1

Datasheet

fluke 87-v/cn handheld digital multimeter, true rms, 10a ac max, dc 1000v max multimeter genggam 87-v/cn, maks, maks multimeters pegang tangan fluke/福禄克 手持式数字万用表，真有效值，最大交流 10a，最大直流 10a，最大交流 万用表 福禄克

fluke-87-v-cn-handheld-digital-multimeter-true-rms-10a-ac-max-10a-dc-max-1000v-ac-max

 To get your hands on quick and accurate electrical readings, choose this multimeter kit from FLUKE. It's a complete solution for measuring current, resistance, frequency and capacitance. As the multimeter measures voltages up to 1,000V AC/DC, it's safe to use in high-voltage systems. This kit includes fully insulated test leads to keep you safe in industrial applications. An IP67 rating on the case means it's dust-tight and protected against water up to a depth of 1m, so you can rely on this device in contaminated settings.


• Broad operating temperature range between -40°C and +55°C for use in harsh conditions
• Hanging accessory lets you mount the component to free up your hands while you work
• Multimeter is drop tested at 4m, so it can handle knocks


• Energy industry
• In-plant automation systems
• Motor drives


What's the battery life of this multimeter?

The multimeter has a long battery life of 800 hours to see you through lengthy testing tasks.


Can I use this product in humid environments?

Yes – the maximum operating humidity of this unit is 90% RH between 0°C and +35°C and 70% RH up to +55 °C, so it's ideal for use in damp places.


The 87V MAX E2 kit comes with TL224 SureGrip™ Insulated Test Leads, AC220 SureGrip™ Alligator Clips and TL238 SureGrip™ Test Probes, ToolPak™ Magnetic Meter Hanging Kit 

<h3 class="md-block-header-three">Fluke 87V-MAX/E2 Multimeter Kit</h3> To get your hands on quick and accurate electrical readings, choose this multimeter kit from FLUKE. It&#x27;s a complete solution for measuring current, resistance, frequency and capacitance. As the multimeter measures voltages up to 1,000V AC/DC, it&#x27;s safe to use in high-voltage systems. This kit includes fully insulated test leads to keep you safe in industrial applications. An IP67 rating on the case means it&#x27;s dust-tight and protected against water up to a depth of 1m, so you can rely on this device in contaminated settings. <h3 class="md-block-header-three">Features &amp; Benefits</h3>• Broad operating temperature range between -40°C and +55°C for use in harsh conditions • Hanging accessory lets you mount the component to free up your hands while you work • Multimeter is drop tested at 4m, so it can handle knocks <h3 class="md-block-header-three">Applications</h3>• Energy industry • In-plant automation systems • Motor drives <h3 class="md-block-header-three">What&#x27;s the battery life of this multimeter?</h3>The multimeter has a long battery life of 800 hours to see you through lengthy testing tasks. <h3 class="md-block-header-three">Can I use this product in humid environments?</h3>Yes – the maximum operating humidity of this unit is 90% RH between 0°C and +35°C and 70% RH up to +55 °C, so it&#x27;s ideal for use in damp places. <h3 class="md-block-header-three">Supplied with</h3>The 87V MAX E2 kit comes with TL224 SureGrip™ Insulated Test Leads, AC220 SureGrip™ Alligator Clips and TL238 SureGrip™ Test Probes, ToolPak™ Magnetic Meter Hanging Kit

<h3>Fluke 87V-MAX/E2 Multimeter Kit</h3>
&nbsp;To get your hands on quick and accurate electrical readings, choose this multimeter kit from FLUKE. It's a complete solution for measuring current, resistance, frequency and capacitance. As the multimeter measures voltages up to 1,000V AC/DC, it's safe to use in high-voltage systems. This kit includes fully insulated test leads to keep you safe in industrial applications. An IP67 rating on the case means it's dust-tight and protected against water up to a depth of 1m, so you can rely on this device in contaminated settings. 

<h3>Features &amp; Benefits</h3>
• Broad operating temperature range between -40°C and +55°C for use in harsh conditions 
• Hanging accessory lets you mount the component to free up your hands while you work 
• Multimeter is drop tested at 4m, so it can handle knocks 

<h3>Applications</h3>
• Energy industry 
• In-plant automation systems 
• Motor drives 

<h3>What's the battery life of this multimeter?</h3>
The multimeter has a long battery life of 800 hours to see you through lengthy testing tasks. 

<h3>Can I use this product in humid environments?</h3>
Yes – the maximum operating humidity of this unit is 90% RH between 0°C and +35°C and 70% RH up to +55 °C, so it's ideal for use in damp places. 

<h3>Supplied with</h3>
The 87V MAX E2 kit comes with TL224 SureGrip™ Insulated Test Leads, AC220 SureGrip™ Alligator Clips and TL238 SureGrip™ Test Probes, ToolPak™ Magnetic Meter Hanging Kit&nbsp;

Fluke 87V-MAX/E2 Multimeter Kit

fluke 87v-max/e2 multimeter kit multimeters fluke/福禄克 万用表套件 万用表 福禄克

fluke-87v-max-e2-multimeter-kit

• TL75 hard-point test lead set included for easy testing straight out of the box
• Multimeter includes a low-pass filter for accurate VFD frequency measurements
• Temperature probe can read extreme temperatures between -40°C and +260°C so it's highly versatile
• Current clamp gives accurate current readings up to 400A AC without breaking the circuit, minimising downtime

• Industrial automation testing
• Power distribution monitoring
• Equipment diagnostics 

<h3 class="md-block-header-three">Fluke 87V Imsk Multimeter Kit </h3>Features &amp; Benefits• TL75 hard-point test lead set included for easy testing straight out of the box • Multimeter includes a low-pass filter for accurate VFD frequency measurements • Temperature probe can read extreme temperatures between -40°C and +260°C so it&#x27;s highly versatile • Current clamp gives accurate current readings up to 400A AC without breaking the circuit, minimising downtimeApplications• Industrial automation testing • Power distribution monitoring • Equipment diagnostics

<h3>Fluke 87V Imsk Multimeter Kit&nbsp;</h3>
Features &amp; Benefits
• TL75 hard-point test lead set included for easy testing straight out of the box 
• Multimeter includes a low-pass filter for accurate VFD frequency measurements 
• Temperature probe can read extreme temperatures between -40°C and +260°C so it's highly versatile 
• Current clamp gives accurate current readings up to 400A AC without breaking the circuit, minimising downtime
Applications
• Industrial automation testing 
• Power distribution monitoring 
• Equipment diagnostics&nbsp;

Fluke 87V Imsk Multimeter Kit

fluke 87v imsk multimeter kit multimeters fluke/福禄克 万用表套件 万用表 福禄克

fluke-87v-imsk-multimeter-kit

The Fluke TL71 Premium Multimeter Test Lead Set is a pair of comfort grip probes (red and black) with flexible silicone-insulated, right-angle test leads. These distinctive comfort grip probes are heat and cold resistant. 

As with all Fluke products, these test leads undergo a battery of safety tests to be rated at:

CAT III 1000 V, CAT IV 600V with protective cap

The WearGuard™ test lead indicator shows wear and tear easier. It exposes a contrasting color when the leads are damaged and need to be replaced. Silicone-insulated leads have superior flexibility in cold temperatures and resistance to high temperatures.

The Fluke TL71 Premium Test Leads are compatible with all instruments that accept standard 4 mm (0.16 in) shrouded banana connectors. Some of the compatible tools include:

Fluke 115 Field Technicians Digital Multimeter

These test leads come with a one-year warranty. 

One pair comfort grip probes with right-angle test leads

WearGuard ™ indicator exposes contrasting color when damaged

<h3 class="md-block-header-three"> Fluke TL71 Premium Test Lead Set</h3>The Fluke TL71 Premium Multimeter Test Lead Set is a pair of comfort grip probes (red and black) with flexible silicone-insulated, right-angle test leads. These distinctive comfort grip probes are heat and cold resistant. <ul class="md-block-unordered-list-item"><li>As with all Fluke products, these test leads undergo a battery of safety tests to be rated at:</li><li>CAT II 1000 V, 10 A rating</li><li>CAT III 1000 V, CAT IV 600V with protective cap</li><li>The WearGuard™ test lead indicator shows wear and tear easier. It exposes a contrasting color when the leads are damaged and need to be replaced. Silicone-insulated leads have superior flexibility in cold temperatures and resistance to high temperatures.</li><li>The Fluke TL71 Premium Test Leads are compatible with all instruments that accept standard 4 mm (0.16 in) shrouded banana connectors. Some of the compatible tools include:</li><li>Fluke 902 FC True-RMS HVAC Clamp Meter</li><li>Fluke 87V Industrial Multimeter</li><li>Fluke 115 Field Technicians Digital Multimeter</li><li>Fluke 787B ProcessMeter™</li><li>These test leads come with a one-year warranty. </li><li>One pair comfort grip probes with right-angle test leads</li><li>WearGuard ™ indicator exposes contrasting color when damaged</li><li>Recommended for µV measurements</li></ul>

<h3> Fluke TL71 Premium Test Lead Set</h3>
The Fluke TL71 Premium Multimeter Test Lead Set is a pair of comfort grip probes (red and black) with flexible silicone-insulated, right-angle test leads. These distinctive comfort grip probes are heat and cold resistant.&nbsp;
<ul>
<li>As with all Fluke products, these test leads undergo a battery of safety tests to be rated at:</li>
<li>CAT II 1000 V, 10 A rating</li>
<li>CAT III 1000 V, CAT IV 600V with protective cap</li>
<li>The WearGuard™ test lead indicator shows wear and tear easier. It exposes a contrasting color when the leads are damaged and need to be replaced. Silicone-insulated leads have superior flexibility in cold temperatures and resistance to high temperatures.</li>
<li>The Fluke TL71 Premium Test Leads are compatible with all instruments that accept standard 4 mm (0.16 in) shrouded banana connectors. Some of the compatible tools include:</li>
<li>Fluke 902 FC True-RMS HVAC Clamp Meter</li>
<li>Fluke 87V Industrial Multimeter</li>
<li>Fluke 115 Field Technicians Digital Multimeter</li>
<li>Fluke 787B ProcessMeter™</li>
<li>These test leads come with a one-year warranty.&nbsp;</li>
<li>One pair comfort grip probes with right-angle test leads</li>
<li>WearGuard ™ indicator exposes contrasting color when damaged</li>
<li>Recommended for µV measurements</li>
</ul>

Extech

ACISION

Center

TRIPLETT

PCE Instruments

MEGGER

AMPROBE

Other Measuring Tools

Electrical Power Testing

Clamp Meters

Industrial Thermometer

Sound & Vibration Meters

Thermal Imaging Cameras

Humidity & Temperature

Fluke TL71 Premium Test Lead Set

fluke tl71 premium test lead set uji multimeter leads plumbum ujian fluke/福禄克 优质测试线组 福禄克

fluke-tl71-premium-test-lead-set

Fluke C280 Multimeter Soft Case for Use With 113 Series, 114 Series, 115 Series, 116 Series, 117 Series, 120 Series, 1503

For Use With	113 Series, 114 Series, 115 Series, 116 Series, 117 Series, 120 Series, 1503 Series, 1507 Series, 1577 Series, 1587 Series, 175 Series, 177 Series, 179 Series, 233 Series, 27II Series, 287 Series, 289 Series, 28II Series, 43B Series, 51 Series, 52 Series, 53 Series, 54II Series, 705 Series, 707 Series, 712 Series, 714 Series, 715 Series, 717 Series, 718 Series, 724 Series, 725 Series, 726 Series, 77IV Series, 787 Series, 83V Series, 87V Series, 88V Series

 The Fluke 289 is optimised for industrial and field service professionals involved in the installation and maintenance or support of facilities or critical systems. It is the next generation of high performance industrial logging multimeters. Compatible with Fluke Connect, which is designed to solve complex problems in electronics, plant automation, power distribution and electro-mechanical equipment. The ability to log data and graphically review up to 10000 recorded events and logged readings with on-board TrendCapture. This lets the 289 be your watchdog for systems or processes while you are off doing other jobs.

50 000 Count, 320 x 240 dot-matrix LCD display with white backlight, allowing clear multiple on-screen display of measurement information
0.025% basic DC accuracy
Logging function with TrendCapture plots measurements as single line to help detect anomalies (TrendCapture allows graphically view of logged readings without a PC)
F1 → F4 soft keys provide flexible user function menus
Navigation keys allow quick selection of menu options and scroll through information screens
Saved measurements allow operator to name and recall measurements made in the field
Upgradeable field and expandable meter as new capabilities are added
Record events and trends for troubleshooting intermittent problems or profiling loads
i-info button on-board helps screen for measurement functions
Internal memory allows standalone logging for up to 180 hours
Preferred measurement settings can be easily saved
True RMS AC voltage and current for accurate measurement of complex signals or non-linear loads. AC bandwidth specified to 100 kHz
DBV / dBm measurement
1 μV resolution in DC mV range
Current measurement 20 A (30 seconds momentary, 10 A continuous)
Peak capture function to record transients as fast as 250 μs
Continuity / Conductance / Capacitance
Resistance and continuity
Duty cycle & pulse width measurement
Min / Max / Average with Time Stamp to record signal fluctuations
Real time and elapsed time modes
CAT III 1000 V / CAT IV 600 V safety rated

LoZ low input impedance function helps prevent false readings due to ’ghost voltage’
50 Ω range for motor winding and low ohm measurements
Low pass filter allows for accurate measurements of motor drives
Optical USB PC communication interface allows for easy PC download to document logged data with FVF software, available separately

The Fluke 289 comes with:
Manual
6 x AA Batteries
Installed TL71 Silicone Test Leads
Probe Holder
2 x AC72 Alligator Clips

C280 soft case designed for the new Fluke 287 and 289 digital multimeters.

Durable polyester 600D case construction for long life
Inner front pocket with closure and dual pouch pockets for test tools and accessories
Compatible with Fluke 287 and 289 digital multimeters or other similar format test tools
Includes detachable, extendable shoulder strap

• Construction and infrastructure industries
• Power utilities
• Industrial manufacturing
• Building maintenance
 

<h3 class="md-block-header-three">Fluke C280 Multimeter Soft Case for Use With 113 Series, 114 Series, 115 Series, 116 Series, 117 Series, 120 Series, 1503</h3><ul class="md-block-unordered-list-item"><li>Accessory Type	Soft Case</li><li>For Use With	113 Series, 114 Series, 115 Series, 116 Series, 117 Series, 120 Series, 1503 Series, 1507 Series, 1577 Series, 1587 Series, 175 Series, 177 Series, 179 Series, 233 Series, 27II Series, 287 Series, 289 Series, 28II Series, 43B Series, 51 Series, 52 Series, 53 Series, 54II Series, 705 Series, 707 Series, 712 Series, 714 Series, 715 Series, 717 Series, 718 Series, 724 Series, 725 Series, 726 Series, 77IV Series, 787 Series, 83V Series, 87V Series, 88V Series</li><li>Dimensions	230 x 185 x 65mm</li><li>Height	65mm</li><li>Length	230mm</li><li>Width	185mm</li></ul> The Fluke 289 is optimised for industrial and field service professionals involved in the installation and maintenance or support of facilities or critical systems. It is the next generation of high performance industrial logging multimeters. Compatible with Fluke Connect, which is designed to solve complex problems in electronics, plant automation, power distribution and electro-mechanical equipment. The ability to log data and graphically review up to 10000 recorded events and logged readings with on-board TrendCapture. This lets the 289 be your watchdog for systems or processes while you are off doing other jobs.Features &amp; Benefits50 000 Count, 320 x 240 dot-matrix LCD display with white backlight, allowing clear multiple on-screen display of measurement information 0.025% basic DC accuracy Logging function with TrendCapture plots measurements as single line to help detect anomalies (TrendCapture allows graphically view of logged readings without a PC) F1 → F4 soft keys provide flexible user function menus Navigation keys allow quick selection of menu options and scroll through information screens Saved measurements allow operator to name and recall measurements made in the field Upgradeable field and expandable meter as new capabilities are added Record events and trends for troubleshooting intermittent problems or profiling loads i-info button on-board helps screen for measurement functions Internal memory allows standalone logging for up to 180 hours Preferred measurement settings can be easily saved True RMS AC voltage and current for accurate measurement of complex signals or non-linear loads. AC bandwidth specified to 100 kHz DBV / dBm measurement 1 μV resolution in DC mV range Current measurement 20 A (30 seconds momentary, 10 A continuous) Peak capture function to record transients as fast as 250 μs Continuity / Conductance / Capacitance Resistance and continuity Duty cycle &amp; pulse width measurement Min / Max / Average with Time Stamp to record signal fluctuations Real time and elapsed time modes CAT III 1000 V / CAT IV 600 V safety ratedFluke 289 Extra FeaturesLoZ low input impedance function helps prevent false readings due to ’ghost voltage’ 50 Ω range for motor winding and low ohm measurements Low pass filter allows for accurate measurements of motor drives Optical USB PC communication interface allows for easy PC download to document logged data with FVF software, available separatelySupplied withThe Fluke 289 comes with: Manual 6 x AA Batteries Installed TL71 Silicone Test Leads Probe Holder 2 x AC72 Alligator ClipsFluke C280 Soft CaseC280 soft case designed for the new Fluke 287 and 289 digital multimeters.Features &amp; BenefitsDurable polyester 600D case construction for long life Inner front pocket with closure and dual pouch pockets for test tools and accessories Compatible with Fluke 287 and 289 digital multimeters or other similar format test tools Includes detachable, extendable shoulder strapApplications• Construction and infrastructure industries • Power utilities • Industrial manufacturing • Building maintenance

<h3>Fluke C280 Multimeter Soft Case for Use With 113 Series, 114 Series, 115 Series, 116 Series, 117 Series, 120 Series, 1503</h3>
<ul>
<li>Accessory Type	Soft Case</li>
<li>For Use With	113 Series, 114 Series, 115 Series, 116 Series, 117 Series, 120 Series, 1503 Series, 1507 Series, 1577 Series, 1587 Series, 175 Series, 177 Series, 179 Series, 233 Series, 27II Series, 287 Series, 289 Series, 28II Series, 43B Series, 51 Series, 52 Series, 53 Series, 54II Series, 705 Series, 707 Series, 712 Series, 714 Series, 715 Series, 717 Series, 718 Series, 724 Series, 725 Series, 726 Series, 77IV Series, 787 Series, 83V Series, 87V Series, 88V Series</li>
<li>Dimensions	230 x 185 x 65mm</li>
<li>Height	65mm</li>
<li>Length	230mm</li>
<li>Width	185mm</li>
</ul>
&nbsp;The Fluke 289 is optimised for industrial and field service professionals involved in the installation and maintenance or support of facilities or critical systems. It is the next generation of high performance industrial logging multimeters. Compatible with Fluke Connect, which is designed to solve complex problems in electronics, plant automation, power distribution and electro-mechanical equipment. The ability to log data and graphically review up to 10000 recorded events and logged readings with on-board TrendCapture. This lets the 289 be your watchdog for systems or processes while you are off doing other jobs.
Features &amp; Benefits
50 000 Count, 320 x 240 dot-matrix LCD display with white backlight, allowing clear multiple on-screen display of measurement information 
0.025% basic DC accuracy 
Logging function with TrendCapture plots measurements as single line to help detect anomalies (TrendCapture allows graphically view of logged readings without a PC) 
F1 → F4 soft keys provide flexible user function menus 
Navigation keys allow quick selection of menu options and scroll through information screens 
Saved measurements allow operator to name and recall measurements made in the field 
Upgradeable field and expandable meter as new capabilities are added 
Record events and trends for troubleshooting intermittent problems or profiling loads 
i-info button on-board helps screen for measurement functions 
Internal memory allows standalone logging for up to 180 hours 
Preferred measurement settings can be easily saved 
True RMS AC voltage and current for accurate measurement of complex signals or non-linear loads. AC bandwidth specified to 100 kHz 
DBV / dBm measurement 
1 μV resolution in DC mV range 
Current measurement 20 A (30 seconds momentary, 10 A continuous) 
Peak capture function to record transients as fast as 250 μs 
Continuity / Conductance / Capacitance 
Resistance and continuity 
Duty cycle &amp; pulse width measurement 
Min / Max / Average with Time Stamp to record signal fluctuations 
Real time and elapsed time modes 
CAT III 1000 V / CAT IV 600 V safety rated
Fluke 289 Extra Features
LoZ low input impedance function helps prevent false readings due to ’ghost voltage’ 
50 Ω range for motor winding and low ohm measurements 
Low pass filter allows for accurate measurements of motor drives 
Optical USB PC communication interface allows for easy PC download to document logged data with FVF software, available separately
Supplied with
The Fluke 289 comes with: 
Manual 
6 x AA Batteries 
Installed TL71 Silicone Test Leads 
Probe Holder 
2 x AC72 Alligator Clips
Fluke C280 Soft Case
C280 soft case designed for the new Fluke 287 and 289 digital multimeters.
Features &amp; Benefits
Durable polyester 600D case construction for long life 
Inner front pocket with closure and dual pouch pockets for test tools and accessories 
Compatible with Fluke 287 and 289 digital multimeters or other similar format test tools 
Includes detachable, extendable shoulder strap
Applications
• Construction and infrastructure industries 
• Power utilities 
• Industrial manufacturing 
• Building maintenance 
&nbsp;

C280 Soft Case Data Sheet

Datasheet - C280

fluke c280 multimeter soft case use 113 series, 114 115 116 117 120 1503 kotak lunak untuk digunakan dengan seri 113, 114, 115, 116, 117, 120, multimeters sarung lembut siri fluke/福禄克 万用表软包，适用于 系列、114 系列、115 系列、116 系列、117 系列、120 系列、1503 万用表 福禄克