RS Pro

SCHNEIDER ELECTRIC

Telemecanique

Electricals

electricals

Junction & Enclosure Box

junction-enclosure-box

Safety Relays

safety-relays

RS PRO Datasheet

ECLIPSE TOOLS

PEGLER YORKSHIRE

STANLEY

Facom

INDUSTRIAL SCIENTIFIC

BOSCH

Carling Technologies

PHOENIX CONTACT

O Ring

Screw

Panel Mount Indicators 

Button Switch

Plugs & Connector 

Clamps

Ethernet Cable

Indicator Lights

Drill Bits & Drill Bit Sets

Bolts

RS Components ETH SG

buyerIntroduction

Rs Pro 1533698 White Abs Enclosure, IP40, Flanged, White Lid, 111 X 45.6 X 27.5mm

rs pro 1533698 white abs enclosure, ip40, flanged, lid, 111 45.6 27.5mm kandang putih, bergelang, tutup 45,6 27,5mm junction enclosure box penutup bebibir, tudung 白色 外壳，ip40，法兰式，白色盖子，111 接线盒 rs专业版

rs-pro-1533698-white-abs-enclosure-ip40-flanged-white-lid-111-x-45-6-x-27-5mm

Telemecanique XPSAC3721 Emergency Stop - Module Xpsac

 This XPSAC safety module monitors emergency shutdown pushbuttons and limit switches. It meets the requirements of Performance Level PL e/Category 4 conforming to standard EN/ISO 13849-1 and SILCL3 conforming to EN/IEC 61508 and EN/IEC 62061. It can be used for monitoring emergency stop circuits conforming to standards EN/ISO 13850 and EN/IEC 60204-1. It has additional solid-state output for communication with PLCs about safety status of your process. 

Range of Product: Preventa Safety Automation

Product or Component Type: Preventa Safety Module

Safety Module Application: For emergency stop and switch monitoring

Can reach PL e/Category 4 conforming to EN/ISO 13849-1

Can reach SILCL 3 conforming to EN/IEC 62061

MTTFd = 210.4 years conforming to EN/ISO 13849-1

PFHd = 3.56E-9 1/h conforming to EN/IEC 62061

Captive screw clamp terminals, various configurations, with double bezel

Output Type: Relay instantaneous opening, 3 NO circuit(s), volt-free

Number of Additional Circuits: 1 solid-state output

Rated Supply Voltage ([Us]): 230 V AC - 15...10 %

Output Thermal Current: 6 A per relay for relay output

[Ith] Conventional Free Air Thermal Current: 10.5 A

4 A gG or gL for relay output conforming to EN/IEC 60947-5-1, DIN VDE 0660 part 200

6 A fast blow for relay output conforming to EN/IEC 60947-5-1, DIN VDE 0660 part 200

Minimum Output Current: 10 mA for relay output

Minimum Output Voltage: 16 V for relay output

Maximum Response Time on Input Open: 100 ms

[Ui] Rated Insulation Voltage: 300 V (pollution degree 2) conforming to IEC 60947-5-1 and DIN VDE 0110 part 1

[Uimp] Rated Impulse Withstand Voltage: 4 kV overvoltage category III conforming to IEC 60947-5-1 and DIN VDE 0110 part 1

Current Consumption: 25 mA at 230 V AC on power supply

Mounting Support: 35 mm symmetrical DIN rail

IP20 (terminals) conforming to EN/IEC 60529

IP40 (enclosure) conforming to EN/IEC 60529

Ambient Air Temperature for Operation: -10…55 °C

Ambient Air Temperature for Storage: -25…85 °C

<h3 class="md-block-header-three">Telemecanique XPSAC3721 Emergency Stop - Module Xpsac</h3> This XPSAC safety module monitors emergency shutdown pushbuttons and limit switches. It meets the requirements of Performance Level PL e/Category 4 conforming to standard EN/ISO 13849-1 and SILCL3 conforming to EN/IEC 61508 and EN/IEC 62061. It can be used for monitoring emergency stop circuits conforming to standards EN/ISO 13850 and EN/IEC 60204-1. It has additional solid-state output for communication with PLCs about safety status of your process. Specifications:<ul class="md-block-unordered-list-item"><li>Range of Product: Preventa Safety Automation</li><li>Product or Component Type: Preventa Safety Module</li><li>Safety Module Name: XPSAC</li><li>Safety Module Application: For emergency stop and switch monitoring</li><li>Function of Module:</li><ul class="md-block-unordered-list-item"><li>Emergency stop</li><li>Switch monitoring</li></ul><li>Safety Level:</li><ul class="md-block-unordered-list-item"><li>Can reach PL e/Category 4 conforming to EN/ISO 13849-1</li><li>Can reach SILCL 3 conforming to EN/IEC 62061</li></ul><li>Safety Reliability Data:</li><ul class="md-block-unordered-list-item"><li>MTTFd = 210.4 years conforming to EN/ISO 13849-1</li><li>DC &gt; 99% conforming to EN/ISO 13849-1</li><li>PFHd = 3.56E-9 1/h conforming to EN/IEC 62061</li></ul><li>Type of Start: Unmonitored</li><li>Connections - Terminals:</li><ul class="md-block-unordered-list-item"><li>Captive screw clamp terminals, various configurations, with double bezel</li></ul><li>Output Type: Relay instantaneous opening, 3 NO circuit(s), volt-free</li><li>Number of Additional Circuits: 1 solid-state output</li><li>Rated Supply Voltage ([Us]): 230 V AC - 15...10 %</li><li>Complementary:</li><ul class="md-block-unordered-list-item"><li>Supply Frequency: 50/60 Hz</li><li>Maximum Power Consumption in VA: 6 VA AC</li><li>[Uc] Control Circuit Voltage: 230 V</li><li>Breaking Capacity:</li><ul class="md-block-unordered-list-item"><li>180 VA holding AC-15 C300 relay output</li><li>1800 VA inrush AC-15 C300 relay output</li></ul><li>Output Thermal Current: 6 A per relay for relay output</li><li>[Ith] Conventional Free Air Thermal Current: 10.5 A</li><li>Associated Fuse Rating:</li><ul class="md-block-unordered-list-item"><li>4 A gG or gL for relay output conforming to EN/IEC 60947-5-1, DIN VDE 0660 part 200</li><li>6 A fast blow for relay output conforming to EN/IEC 60947-5-1, DIN VDE 0660 part 200</li></ul><li>Minimum Output Current: 10 mA for relay output</li><li>Minimum Output Voltage: 16 V for relay output</li><li>Maximum Response Time on Input Open: 100 ms</li><li>[Ui] Rated Insulation Voltage: 300 V (pollution degree 2) conforming to IEC 60947-5-1 and DIN VDE 0110 part 1</li><li>[Uimp] Rated Impulse Withstand Voltage: 4 kV overvoltage category III conforming to IEC 60947-5-1 and DIN VDE 0110 part 1</li><li>Local Signalling: 2 LEDs</li><li>Current Consumption: 25 mA at 230 V AC on power supply</li><li>Mounting Support: 35 mm symmetrical DIN rail</li><li>Net Weight: 0.21 kg</li></ul><li>Environment:</li><ul class="md-block-unordered-list-item"><li>Standards:</li><ul class="md-block-unordered-list-item"><li>EN/IEC 60947-5-1</li><li>EN/ISO 13850</li><li>EN 1088/ISO 14119</li><li>EN 60204-1</li></ul><li>Product Certifications: TÜV, UL, CSA</li><li>IP Degree of Protection:</li><ul class="md-block-unordered-list-item"><li>IP20 (terminals) conforming to EN/IEC 60529</li><li>IP40 (enclosure) conforming to EN/IEC 60529</li></ul><li>Ambient Air Temperature for Operation: -10…55 °C</li><li>Ambient Air Temperature for Storage: -25…85 °C</li></ul></ul>

<h3>Telemecanique XPSAC3721 Emergency Stop - Module Xpsac</h3>
&nbsp;This XPSAC safety module monitors emergency shutdown pushbuttons and limit switches. It meets the requirements of Performance Level PL e/Category 4 conforming to standard EN/ISO 13849-1 and SILCL3 conforming to EN/IEC 61508 and EN/IEC 62061. It can be used for monitoring emergency stop circuits conforming to standards EN/ISO 13850 and EN/IEC 60204-1. It has additional solid-state output for communication with PLCs about safety status of your process.&nbsp;
&nbsp;Specifications:
<ul>
<li>Range of Product: Preventa Safety Automation</li>
<li>Product or Component Type: Preventa Safety Module</li>
<li>Safety Module Name: XPSAC</li>
<li>Safety Module Application: For emergency stop and switch monitoring</li>
<li>Function of Module:</li>
<ul>
<li>Emergency stop</li>
<li>Switch monitoring</li>
</ul>
<li>Safety Level:</li>
<ul>
<li>Can reach PL e/Category 4 conforming to EN/ISO 13849-1</li>
<li>Can reach SILCL 3 conforming to EN/IEC 62061</li>
</ul>
<li>Safety Reliability Data:</li>
<ul>
<li>MTTFd = 210.4 years conforming to EN/ISO 13849-1</li>
<li>DC &gt; 99% conforming to EN/ISO 13849-1</li>
<li>PFHd = 3.56E-9 1/h conforming to EN/IEC 62061</li>
</ul>
<li>Type of Start: Unmonitored</li>
<li>Connections - Terminals:</li>
<ul>
<li>Captive screw clamp terminals, various configurations, with double bezel</li>
</ul>
<li>Output Type: Relay instantaneous opening, 3 NO circuit(s), volt-free</li>
<li>Number of Additional Circuits: 1 solid-state output</li>
<li>Rated Supply Voltage ([Us]): 230 V AC - 15...10 %</li>
<li>Complementary:</li>
<ul>
<li>Supply Frequency: 50/60 Hz</li>
<li>Maximum Power Consumption in VA: 6 VA AC</li>
<li>[Uc] Control Circuit Voltage: 230 V</li>
<li>Breaking Capacity:</li>
<ul>
<li>180 VA holding AC-15 C300 relay output</li>
<li>1800 VA inrush AC-15 C300 relay output</li>
</ul>
<li>Output Thermal Current: 6 A per relay for relay output</li>
<li>[Ith] Conventional Free Air Thermal Current: 10.5 A</li>
<li>Associated Fuse Rating:</li>
<ul>
<li>4 A gG or gL for relay output conforming to EN/IEC 60947-5-1, DIN VDE 0660 part 200</li>
<li>6 A fast blow for relay output conforming to EN/IEC 60947-5-1, DIN VDE 0660 part 200</li>
</ul>
<li>Minimum Output Current: 10 mA for relay output</li>
<li>Minimum Output Voltage: 16 V for relay output</li>
<li>Maximum Response Time on Input Open: 100 ms</li>
<li>[Ui] Rated Insulation Voltage: 300 V (pollution degree 2) conforming to IEC 60947-5-1 and DIN VDE 0110 part 1</li>
<li>[Uimp] Rated Impulse Withstand Voltage: 4 kV overvoltage category III conforming to IEC 60947-5-1 and DIN VDE 0110 part 1</li>
<li>Local Signalling: 2 LEDs</li>
<li>Current Consumption: 25 mA at 230 V AC on power supply</li>
<li>Mounting Support: 35 mm symmetrical DIN rail</li>
<li>Net Weight: 0.21 kg</li>
</ul>
<li>Environment:</li>
<ul>
<li>Standards:</li>
<ul>
<li>EN/IEC 60947-5-1</li>
<li>EN/ISO 13850</li>
<li>EN 1088/ISO 14119</li>
<li>EN 60204-1</li>
</ul>
<li>Product Certifications: TÜV, UL, CSA</li>
<li>IP Degree of Protection:</li>
<ul>
<li>IP20 (terminals) conforming to EN/IEC 60529</li>
<li>IP40 (enclosure) conforming to EN/IEC 60529</li>
</ul>
<li>Ambient Air Temperature for Operation: -10…55 °C</li>
<li>Ambient Air Temperature for Storage: -25…85 °C</li>
</ul>
</ul>
&nbsp;

Product Datasheet

Instruction sheet

Catalogue

Environmental disclosure

APC by Schneider Electric

CLIPSAL

Square D

Pilot Lights

Light Switches

Contactors

Miniature Circuit Breakers - MCBs

Uninterruptible Power Supply 

Molded Case Circuit Breakers - MCCBs

EasyPact Circuit Breakers 

Standby battery 

Overload Relays

Schneider

telemecanique xpsac3721 emergency stop module xpsac berhenti darurat modul safety relays hentian kecemasan 紧急停止 模块 泰莱机械公司

telemecanique-xpsac3721-emergency-stop-module-xpsac

  Telemecanique XPSAC5121 Emergency Stop - Module Xpsac

This XPSAC safety module monitors emergency shutdown pushbuttons and limit switches. It meets the requirements of Performance Level PL e/Category 4 conforming to standard EN/ISO 13849-1 and SILCL3 conforming to EN/IEC 61508 and EN/IEC 62061. It can be used for monitoring emergency stop circuits conforming to standards EN/ISO 13850 and EN/IEC 60204-1. 24V AC/DC supply allows direct supply via an auxiliary transformer, like ABT7 or ABL6, allowing saving at installation time. It has additional solid-state output for communication with PLCs about safety status of your process. 

Captive screw clamp terminals for various cable types and sizes

300 V (pollution degree 2) conforming to IEC 60947-5-1

300 V (pollution degree 2) conforming to DIN VDE 0110 part 1

4 kV overvoltage category III conforming to IEC 60947-5-1

4 kV overvoltage category III conforming to DIN VDE 0110 part 1

<h3 class="md-block-header-three"> Telemecanique XPSAC5121 Emergency Stop - Module Xpsac</h3>This XPSAC safety module monitors emergency shutdown pushbuttons and limit switches. It meets the requirements of Performance Level PL e/Category 4 conforming to standard EN/ISO 13849-1 and SILCL3 conforming to EN/IEC 61508 and EN/IEC 62061. It can be used for monitoring emergency stop circuits conforming to standards EN/ISO 13850 and EN/IEC 60204-1. 24V AC/DC supply allows direct supply via an auxiliary transformer, like ABT7 or ABL6, allowing saving at installation time. It has additional solid-state output for communication with PLCs about safety status of your process. Specifications:<ul class="md-block-unordered-list-item"><li>Range of Product: Preventa Safety Automation</li><li>Product or Component Type: Preventa Safety Module</li><li>Safety Module Name: XPSAC</li><li>Safety Module Application: For emergency stop and switch monitoring</li><li>Function of Module:</li><ul class="md-block-unordered-list-item"><li>Emergency stop</li><li>Switch monitoring</li></ul><li>Safety Level:</li><ul class="md-block-unordered-list-item"><li>Can reach PL e/Category 4 conforming to EN/ISO 13849-1</li><li>Can reach SILCL 3 conforming to EN/IEC 62061</li></ul><li>Safety Reliability Data:</li><ul class="md-block-unordered-list-item"><li>MTTFd = 210.4 years conforming to EN/ISO 13849-1</li><li>DC &gt; 99% conforming to EN/ISO 13849-1</li><li>PFHd = 3.56E-9 1/h conforming to EN/IEC 62061</li></ul><li>Type of Start: Unmonitored</li><li>Connections - Terminals:</li><ul class="md-block-unordered-list-item"><li>Captive screw clamp terminals for various cable types and sizes</li></ul><li>Output Type: Relay instantaneous opening, 3 NO circuit(s), volt-free</li><li>Number of Additional Circuits: 1 solid-state output</li><li>Rated Supply Voltage ([Us]):</li><ul class="md-block-unordered-list-item"><li>24 V AC - 20...10%</li><li>24 V DC - 20...20%</li></ul><li>Complementary:</li><ul class="md-block-unordered-list-item"><li>Supply Frequency: 50/60 Hz</li><li>Maximum Power Consumption:</li><ul class="md-block-unordered-list-item"><li>1.2 W DC</li><li>2.5 VA AC</li></ul><li>[Uc] Control Circuit Voltage: 24 V</li><li>Breaking Capacity:</li><ul class="md-block-unordered-list-item"><li>180 VA holding AC-15 C300 relay output</li><li>1800 VA inrush AC-15 C300 relay output</li></ul><li>Output Thermal Current: 6 A per relay for relay output</li><li>[Ith] Conventional Free Air Thermal Current: 10.5 A</li><li>Associated Fuse Rating:</li><ul class="md-block-unordered-list-item"><li>4 A gG or gL for relay output conforming to EN/IEC 60947-5-1, DIN VDE 0660 part 200</li><li>6 A fast blow for relay output conforming to EN/IEC 60947-5-1, DIN VDE 0660 part 200</li></ul><li>Minimum Output Current: 10 mA for relay output</li><li>Minimum Output Voltage: 16 V for relay output</li><li>Maximum Response Time on Input Open: 100 ms</li><li>[Ui] Rated Insulation Voltage:</li><ul class="md-block-unordered-list-item"><li>300 V (pollution degree 2) conforming to IEC 60947-5-1</li><li>300 V (pollution degree 2) conforming to DIN VDE 0110 part 1</li></ul><li>[Uimp] Rated Impulse Withstand Voltage:</li><ul class="md-block-unordered-list-item"><li>4 kV overvoltage category III conforming to IEC 60947-5-1</li><li>4 kV overvoltage category III conforming to DIN VDE 0110 part 1</li></ul><li>Local Signalling: 2 LEDs</li><li>Current Consumption:</li><ul class="md-block-unordered-list-item"><li>40 mA at 24 V DC on power supply</li><li>90 mA at 24 V AC on power supply</li></ul><li>Mounting Support: 35 mm symmetrical DIN rail</li><li>Net Weight: 0.16 kg</li></ul><li>Environment:</li><ul class="md-block-unordered-list-item"><li>Standards:</li><ul class="md-block-unordered-list-item"><li>EN/IEC 60947-5-1</li><li>EN/ISO 13850</li><li>EN 60204-1</li><li>EN 1088/ISO 14119</li></ul><li>Product Certifications: UL, CSA, TÜV</li><li>IP Degree of Protection:</li><ul class="md-block-unordered-list-item"><li>IP20 (terminals) conforming to EN/IEC 60529</li><li>IP40 (enclosure) conforming to EN/IEC 60529</li></ul><li>Ambient Air Temperature for Operation: -10…55 °C</li><li>Ambient Air Temperature for Storage: -25…85 °C</li></ul></ul>

<h3> Telemecanique XPSAC5121 Emergency Stop - Module Xpsac</h3>
This XPSAC safety module monitors emergency shutdown pushbuttons and limit switches. It meets the requirements of Performance Level PL e/Category 4 conforming to standard EN/ISO 13849-1 and SILCL3 conforming to EN/IEC 61508 and EN/IEC 62061. It can be used for monitoring emergency stop circuits conforming to standards EN/ISO 13850 and EN/IEC 60204-1. 24V AC/DC supply allows direct supply via an auxiliary transformer, like ABT7 or ABL6, allowing saving at installation time. It has additional solid-state output for communication with PLCs about safety status of your process.&nbsp;
Specifications:
<ul>
<li>Range of Product: Preventa Safety Automation</li>
<li>Product or Component Type: Preventa Safety Module</li>
<li>Safety Module Name: XPSAC</li>
<li>Safety Module Application: For emergency stop and switch monitoring</li>
<li>Function of Module:</li>
<ul>
<li>Emergency stop</li>
<li>Switch monitoring</li>
</ul>
<li>Safety Level:</li>
<ul>
<li>Can reach PL e/Category 4 conforming to EN/ISO 13849-1</li>
<li>Can reach SILCL 3 conforming to EN/IEC 62061</li>
</ul>
<li>Safety Reliability Data:</li>
<ul>
<li>MTTFd = 210.4 years conforming to EN/ISO 13849-1</li>
<li>DC &gt; 99% conforming to EN/ISO 13849-1</li>
<li>PFHd = 3.56E-9 1/h conforming to EN/IEC 62061</li>
</ul>
<li>Type of Start: Unmonitored</li>
<li>Connections - Terminals:</li>
<ul>
<li>Captive screw clamp terminals for various cable types and sizes</li>
</ul>
<li>Output Type: Relay instantaneous opening, 3 NO circuit(s), volt-free</li>
<li>Number of Additional Circuits: 1 solid-state output</li>
<li>Rated Supply Voltage ([Us]):</li>
<ul>
<li>24 V AC - 20...10%</li>
<li>24 V DC - 20...20%</li>
</ul>
<li>Complementary:</li>
<ul>
<li>Supply Frequency: 50/60 Hz</li>
<li>Maximum Power Consumption:</li>
<ul>
<li>1.2 W DC</li>
<li>2.5 VA AC</li>
</ul>
<li>[Uc] Control Circuit Voltage: 24 V</li>
<li>Breaking Capacity:</li>
<ul>
<li>180 VA holding AC-15 C300 relay output</li>
<li>1800 VA inrush AC-15 C300 relay output</li>
</ul>
<li>Output Thermal Current: 6 A per relay for relay output</li>
<li>[Ith] Conventional Free Air Thermal Current: 10.5 A</li>
<li>Associated Fuse Rating:</li>
<ul>
<li>4 A gG or gL for relay output conforming to EN/IEC 60947-5-1, DIN VDE 0660 part 200</li>
<li>6 A fast blow for relay output conforming to EN/IEC 60947-5-1, DIN VDE 0660 part 200</li>
</ul>
<li>Minimum Output Current: 10 mA for relay output</li>
<li>Minimum Output Voltage: 16 V for relay output</li>
<li>Maximum Response Time on Input Open: 100 ms</li>
<li>[Ui] Rated Insulation Voltage:</li>
<ul>
<li>300 V (pollution degree 2) conforming to IEC 60947-5-1</li>
<li>300 V (pollution degree 2) conforming to DIN VDE 0110 part 1</li>
</ul>
<li>[Uimp] Rated Impulse Withstand Voltage:</li>
<ul>
<li>4 kV overvoltage category III conforming to IEC 60947-5-1</li>
<li>4 kV overvoltage category III conforming to DIN VDE 0110 part 1</li>
</ul>
<li>Local Signalling: 2 LEDs</li>
<li>Current Consumption:</li>
<ul>
<li>40 mA at 24 V DC on power supply</li>
<li>90 mA at 24 V AC on power supply</li>
</ul>
<li>Mounting Support: 35 mm symmetrical DIN rail</li>
<li>Net Weight: 0.16 kg</li>
</ul>
<li>Environment:</li>
<ul>
<li>Standards:</li>
<ul>
<li>EN/IEC 60947-5-1</li>
<li>EN/ISO 13850</li>
<li>EN 60204-1</li>
<li>EN 1088/ISO 14119</li>
</ul>
<li>Product Certifications: UL, CSA, TÜV</li>
<li>IP Degree of Protection:</li>
<ul>
<li>IP20 (terminals) conforming to EN/IEC 60529</li>
<li>IP40 (enclosure) conforming to EN/IEC 60529</li>
</ul>
<li>Ambient Air Temperature for Operation: -10…55 °C</li>
<li>Ambient Air Temperature for Storage: -25…85 °C</li>
</ul>
</ul>

Telemecanique XPSAC5121 Emergency Stop - Module Xpsac

telemecanique xpsac5121 emergency stop module xpsac berhenti darurat modul safety relays hentian kecemasan 紧急停止 模块 泰莱机械公司

telemecanique-xpsac5121-emergency-stop-module-xpsac

Schneider Electric XPSCM1144 single-beam photo-electric Sensors - Module XPS-CM

This XPSCM safety module is for monitoring of single-beam photo-electric sensors and has a built-in "muting" function. It meets the requirements of PL c/Category 2 conforming to EN/ISO 13849-1.and SILCL1 conforming to EN/IEC 61508 and EN/IEC 62061. Used in conjunction with XU2S single-beam photo-electric sensors (periodically tested), it establishes a category 2 light curtain conforming to IEC/EN 61496 parts 1 and 2.

Range of Product: Telemecanique Safety Light Curtains XUSL

Safety Module Application: For monitoring of single beam photo-electric sensor

Can reach Category 2 with the appropriate control system and correctly wired conforming to EN/ISO 13849-1

Can reach SILCL 1 with the appropriate control system and correctly wired conforming to EN/IEC 62061

Can reach PL = c with the appropriate control system and correctly wired conforming to EN/ISO 13849-1

MTTFd (Mean Time To Dangerous Failure) = 16.6 years conforming to EN/ISO 13849-1

DC (Diagnostic Coverage) = 95.5% conforming to EN/ISO 13849-1

PFH (Probability of Dangerous Failure per Hour) = 3.12E-7 1/h conforming to EN/IEC 61508

PFHd (Probability of Dangerous Failure per Hour) = 3.12E-7 1/h conforming to EN/IEC 62061

24 V DC (terminals U+, U-) for muting function

Connections - Terminals: Various captive screw clamp terminals for different cable types and configurations

Output Type: Relay 2 NO (Normally Open) (13-14, 23-24), volt-free

Rated Supply Voltage ([Us]): 24 V DC with a tolerance of -20% to +20%

3 s (+/- 20 %) for the activation of the MA/MB muting signal

1.5 A at 24 V (DC-13) time constant: 50 ms for relay output

4 A gG for relay output conforming to DIN VDE 0660 part 200

4 A gG for relay output conforming to EN/IEC 60947-5-1

6 A fast blow for relay output conforming to DIN VDE 0660 part 200

6 A fast blow for relay output conforming to EN/IEC 60947-5-1

1 LED for electronic internal fuse status

1 incandescent lamp for muting power consumption: 4…6.5 W

300 V (pollution degree 2) conforming to DIN VDE 0110 parts 1 and 2

300 V (pollution degree 2) conforming to EN/IEC 60947-5-1

4 kV overvoltage category III conforming to DIN VDE 0110 parts 1 and 2

4 kV overvoltage category III conforming to EN/IEC 60947-5-1

<h3 class="md-block-header-three">Schneider Electric XPSCM1144 single-beam photo-electric Sensors - Module XPS-CM</h3>This XPSCM safety module is for monitoring of single-beam photo-electric sensors and has a built-in &quot;muting&quot; function. It meets the requirements of PL c/Category 2 conforming to EN/ISO 13849-1.and SILCL1 conforming to EN/IEC 61508 and EN/IEC 62061. Used in conjunction with XU2S single-beam photo-electric sensors (periodically tested), it establishes a category 2 light curtain conforming to IEC/EN 61496 parts 1 and 2.Main<ul class="md-block-unordered-list-item"><li>Range of Product: Telemecanique Safety Light Curtains XUSL</li><li>Product or Component Type: Safety Module</li><li>Safety Module Name: XPSCM</li><li>Safety Module Application: For monitoring of single beam photo-electric sensor</li><li>Function of Module: Built-in muting</li><li>Safety Level:</li><ul class="md-block-unordered-list-item"><li>Can reach Category 2 with the appropriate control system and correctly wired conforming to EN/ISO 13849-1</li><li>Can reach SILCL 1 with the appropriate control system and correctly wired conforming to EN/IEC 62061</li><li>Can reach PL = c with the appropriate control system and correctly wired conforming to EN/ISO 13849-1</li></ul><li>Safety Reliability Data:</li><ul class="md-block-unordered-list-item"><li>MTTFd (Mean Time To Dangerous Failure) = 16.6 years conforming to EN/ISO 13849-1</li><li>DC (Diagnostic Coverage) = 95.5% conforming to EN/ISO 13849-1</li><li>PFH (Probability of Dangerous Failure per Hour) = 3.12E-7 1/h conforming to EN/IEC 61508</li><li>PFHd (Probability of Dangerous Failure per Hour) = 3.12E-7 1/h conforming to EN/IEC 62061</li></ul><li>Number of Inputs:</li><ul class="md-block-unordered-list-item"><li>2 (terminals MA, MB) for muting function</li><li>4 (terminals Z1, Z2, Z3, Z4) for sensor</li></ul><li>Input Voltage:</li><ul class="md-block-unordered-list-item"><li>24 V DC for sensor</li><li>24 V DC (terminals U+, U-) for muting function</li></ul><li>Input Compatibility:</li><ul class="md-block-unordered-list-item"><li>XC limit switch for muting function</li><li>XU2M18PP340... for muting function</li><li>XU2S18PP340... (infrared) for sensor</li><li>XU9M18PP340... for muting function</li></ul><li>Connections - Terminals: Various captive screw clamp terminals for different cable types and configurations</li><li>Output Type: Relay 2 NO (Normally Open) (13-14, 23-24), volt-free</li><li>Number of Additional Circuits: 0</li><li>Rated Supply Voltage ([Us]): 24 V DC with a tolerance of -20% to +20%</li></ul>Complimentary<ul class="md-block-unordered-list-item"><li>Sensor Power Supply:</li><ul class="md-block-unordered-list-item"><li>U+, U-: 24 V DC</li></ul><li>Maximum Supply Current for Sensors:</li><ul class="md-block-unordered-list-item"><li>200 mA</li></ul><li>Input Current:</li><ul class="md-block-unordered-list-item"><li>200 mA for muting function</li></ul><li>Synchronization Time Between Inputs:</li><ul class="md-block-unordered-list-item"><li>3 s (+/- 20 %) for the activation of the MA/MB muting signal</li></ul><li>Muting Maximum Duration:</li><ul class="md-block-unordered-list-item"><li>60 s (-10...30 %)</li></ul><li>Maximum Line Resistance:</li><ul class="md-block-unordered-list-item"><li>10 Ohm for sensor power supply</li></ul><li>Breaking Capacity:</li><ul class="md-block-unordered-list-item"><li>180 VA holding AC-15 C300 relay output</li><li>1800 VA inrush AC-15 C300 relay output</li><li>20 mA at 24 V for solid-state output</li><li>1.5 A at 24 V (DC-13) time constant: 50 ms for relay output</li></ul><li>Associated Fuse Rating:</li><ul class="md-block-unordered-list-item"><li>4 A gG for relay output conforming to DIN VDE 0660 part 200</li><li>4 A gG for relay output conforming to EN/IEC 60947-5-1</li><li>6 A fast blow for relay output conforming to DIN VDE 0660 part 200</li><li>6 A fast blow for relay output conforming to EN/IEC 60947-5-1</li></ul><li>Minimum Output Current:</li><ul class="md-block-unordered-list-item"><li>10 mA for relay output</li></ul><li>Minimum Output Voltage:</li><ul class="md-block-unordered-list-item"><li>17 V for relay output</li></ul><li>Maximum Response Time on Input Open:</li><ul class="md-block-unordered-list-item"><li>25 ms</li></ul><li>Local Signaling:</li><ul class="md-block-unordered-list-item"><li>1 LED for electronic internal fuse status</li><li>1 LED for restarting function</li><li>1 LED for safety outputs closed function</li><li>1 LED for safety outputs open function</li><li>1 incandescent lamp for muting power consumption: 4…6.5 W</li></ul><li>Output Thermal Current:</li><ul class="md-block-unordered-list-item"><li>5.6 A per relay</li><li>11 A maximum</li></ul><li>Maximum Power Consumption in W:</li><ul class="md-block-unordered-list-item"><li>15 W</li></ul><li>Protection Type:</li><ul class="md-block-unordered-list-item"><li>Electronic internal fuse</li></ul><li>[Ui] Rated Insulation Voltage:</li><ul class="md-block-unordered-list-item"><li>300 V (pollution degree 2) conforming to DIN VDE 0110 parts 1 and 2</li><li>300 V (pollution degree 2) conforming to EN/IEC 60947-5-1</li></ul><li>[Uimp] Rated Impulse Withstand Voltage:</li><ul class="md-block-unordered-list-item"><li>4 kV overvoltage category III conforming to DIN VDE 0110 parts 1 and 2</li><li>4 kV overvoltage category III conforming to EN/IEC 60947-5-1</li></ul></ul>Environment<ul class="md-block-unordered-list-item"><li>Ambient Air Temperature:</li><ul class="md-block-unordered-list-item"><li>For Operation: -10…55 °C</li><li>For Storage: -25…85 °C</li></ul><li>IP Degree of Protection:</li><ul class="md-block-unordered-list-item"><li>IP20 (terminals) conforming to IEC 60529</li><li>IP40 (enclosure) conforming to IEC 60529</li></ul></ul>

<h3>Schneider Electric XPSCM1144 single-beam photo-electric Sensors - Module XPS-CM</h3>
This XPSCM safety module is for monitoring of single-beam photo-electric sensors and has a built-in "muting" function. It meets the requirements of PL c/Category 2 conforming to EN/ISO 13849-1.and SILCL1 conforming to EN/IEC 61508 and EN/IEC 62061. Used in conjunction with XU2S single-beam photo-electric sensors (periodically tested), it establishes a category 2 light curtain conforming to IEC/EN 61496 parts 1 and 2.
Main
<ul>
<li>Range of Product: Telemecanique Safety Light Curtains XUSL</li>
<li>Product or Component Type: Safety Module</li>
<li>Safety Module Name: XPSCM</li>
<li>Safety Module Application: For monitoring of single beam photo-electric sensor</li>
<li>Function of Module: Built-in muting</li>
<li>Safety Level:</li>
<ul>
<li>Can reach Category 2 with the appropriate control system and correctly wired conforming to EN/ISO 13849-1</li>
<li>Can reach SILCL 1 with the appropriate control system and correctly wired conforming to EN/IEC 62061</li>
<li>Can reach PL = c with the appropriate control system and correctly wired conforming to EN/ISO 13849-1</li>
</ul>
<li>Safety Reliability Data:</li>
<ul>
<li>MTTFd (Mean Time To Dangerous Failure) = 16.6 years conforming to EN/ISO 13849-1</li>
<li>DC (Diagnostic Coverage) = 95.5% conforming to EN/ISO 13849-1</li>
<li>PFH (Probability of Dangerous Failure per Hour) = 3.12E-7 1/h conforming to EN/IEC 61508</li>
<li>PFHd (Probability of Dangerous Failure per Hour) = 3.12E-7 1/h conforming to EN/IEC 62061</li>
</ul>
<li>Number of Inputs:</li>
<ul>
<li>2 (terminals MA, MB) for muting function</li>
<li>4 (terminals Z1, Z2, Z3, Z4) for sensor</li>
</ul>
<li>Input Voltage:</li>
<ul>
<li>24 V DC for sensor</li>
<li>24 V DC (terminals U+, U-) for muting function</li>
</ul>
<li>Input Compatibility:</li>
<ul>
<li>XC limit switch for muting function</li>
<li>XU2M18PP340... for muting function</li>
<li>XU2S18PP340... (infrared) for sensor</li>
<li>XU9M18PP340... for muting function</li>
</ul>
<li>Connections - Terminals: Various captive screw clamp terminals for different cable types and configurations</li>
<li>Output Type: Relay 2 NO (Normally Open) (13-14, 23-24), volt-free</li>
<li>Number of Additional Circuits: 0</li>
<li>Rated Supply Voltage ([Us]): 24 V DC with a tolerance of -20% to +20%</li>
</ul>
Complimentary
<ul>
<li>Sensor Power Supply:</li>
<ul>
<li>U+, U-: 24 V DC</li>
</ul>
<li>Maximum Supply Current for Sensors:</li>
<ul>
<li>200 mA</li>
</ul>
<li>Input Current:</li>
<ul>
<li>200 mA for muting function</li>
</ul>
<li>Synchronization Time Between Inputs:</li>
<ul>
<li>3 s (+/- 20 %) for the activation of the MA/MB muting signal</li>
</ul>
<li>Muting Maximum Duration:</li>
<ul>
<li>60 s (-10...30 %)</li>
</ul>
<li>Maximum Line Resistance:</li>
<ul>
<li>10 Ohm for sensor power supply</li>
</ul>
<li>Breaking Capacity:</li>
<ul>
<li>180 VA holding AC-15 C300 relay output</li>
<li>1800 VA inrush AC-15 C300 relay output</li>
<li>20 mA at 24 V for solid-state output</li>
<li>1.5 A at 24 V (DC-13) time constant: 50 ms for relay output</li>
</ul>
<li>Associated Fuse Rating:</li>
<ul>
<li>4 A gG for relay output conforming to DIN VDE 0660 part 200</li>
<li>4 A gG for relay output conforming to EN/IEC 60947-5-1</li>
<li>6 A fast blow for relay output conforming to DIN VDE 0660 part 200</li>
<li>6 A fast blow for relay output conforming to EN/IEC 60947-5-1</li>
</ul>
<li>Minimum Output Current:</li>
<ul>
<li>10 mA for relay output</li>
</ul>
<li>Minimum Output Voltage:</li>
<ul>
<li>17 V for relay output</li>
</ul>
<li>Maximum Response Time on Input Open:</li>
<ul>
<li>25 ms</li>
</ul>
<li>Local Signaling:</li>
<ul>
<li>1 LED for electronic internal fuse status</li>
<li>1 LED for restarting function</li>
<li>1 LED for safety outputs closed function</li>
<li>1 LED for safety outputs open function</li>
<li>1 incandescent lamp for muting power consumption: 4…6.5 W</li>
</ul>
<li>Output Thermal Current:</li>
<ul>
<li>5.6 A per relay</li>
<li>11 A maximum</li>
</ul>
<li>Maximum Power Consumption in W:</li>
<ul>
<li>15 W</li>
</ul>
<li>Protection Type:</li>
<ul>
<li>Electronic internal fuse</li>
</ul>
<li>[Ui] Rated Insulation Voltage:</li>
<ul>
<li>300 V (pollution degree 2) conforming to DIN VDE 0110 parts 1 and 2</li>
<li>300 V (pollution degree 2) conforming to EN/IEC 60947-5-1</li>
</ul>
<li>[Uimp] Rated Impulse Withstand Voltage:</li>
<ul>
<li>4 kV overvoltage category III conforming to DIN VDE 0110 parts 1 and 2</li>
<li>4 kV overvoltage category III conforming to EN/IEC 60947-5-1</li>
</ul>
</ul>
Environment
<ul>
<li>Ambient Air Temperature:</li>
<ul>
<li>For Operation: -10…55 °C</li>
<li>For Storage: -25…85 °C</li>
</ul>
<li>IP Degree of Protection:</li>
<ul>
<li>IP20 (terminals) conforming to IEC 60529</li>
<li>IP40 (enclosure) conforming to IEC 60529</li>
</ul>
</ul>
&nbsp; 
&nbsp;

Circuit Breaker

Motor Protection Circuit Breakers

TV, Telephone & Internet Sockets

schneider electric xpscm1144 single-beam photo-electric sensors module xps-cm sensor fotolistrik sinar tunggal modul safety relays penderia foto-elektrik pancaran electric/施耐德电气 单光束光电传感器 模块 施耐德电气

schneider-electric-xpscm1144-single-beam-photo-electric-sensors-module-xps-cm

Telemecanique XPSAC5121P Emergency Stop - Module Xpsac

 This XPSAC safety module monitors emergency shutdown pushbuttons and limit switches. It meets the requirements of Performance Level PL e/Category 4 conforming to standard EN/ISO 13849-1 and SILCL3 conforming to EN/IEC 61508 and EN/IEC 62061. It can be used for monitoring emergency stop circuits conforming to standards EN/ISO 13850 and EN/IEC 60204-1. 24V AC/DC supply allows direct supply via an auxiliary transformer, like ABT7 or ABL6, allowing saving at installation time. It has removable terminals for easier and better control wires tightening, thus improving installation reliability. It has additional solid-state output for communication with PLCs about safety status of your process.  

Captive screw clamp terminals, removable terminal block, various configurations, with double bezel

<h3 class="md-block-header-three">Telemecanique XPSAC5121P Emergency Stop - Module Xpsac</h3> This XPSAC safety module monitors emergency shutdown pushbuttons and limit switches. It meets the requirements of Performance Level PL e/Category 4 conforming to standard EN/ISO 13849-1 and SILCL3 conforming to EN/IEC 61508 and EN/IEC 62061. It can be used for monitoring emergency stop circuits conforming to standards EN/ISO 13850 and EN/IEC 60204-1. 24V AC/DC supply allows direct supply via an auxiliary transformer, like ABT7 or ABL6, allowing saving at installation time. It has removable terminals for easier and better control wires tightening, thus improving installation reliability. It has additional solid-state output for communication with PLCs about safety status of your process. <ul class="md-block-unordered-list-item"><li>Range of Product: Preventa Safety Automation</li><li>Product or Component Type: Preventa Safety Module</li><li>Safety Module Name: XPSAC</li><li>Safety Module Application: For emergency stop and switch monitoring</li><li>Function of Module:</li><ul class="md-block-unordered-list-item"><li>Switch monitoring</li><li>Emergency stop</li></ul><li>Safety Level:</li><ul class="md-block-unordered-list-item"><li>Can reach PL e/Category 4 conforming to EN/ISO 13849-1</li><li>Can reach SILCL 3 conforming to EN/IEC 62061</li></ul><li>Safety Reliability Data:</li><ul class="md-block-unordered-list-item"><li>MTTFd = 210.4 years conforming to EN/ISO 13849-1</li><li>DC &gt; 99% conforming to EN/ISO 13849-1</li><li>PFHd = 3.56E-9 1/h conforming to EN/IEC 62061</li></ul><li>Type of Start: Unmonitored</li><li>Connections - Terminals:</li><ul class="md-block-unordered-list-item"><li>Captive screw clamp terminals, removable terminal block, various configurations, with double bezel</li></ul><li>Output Type: Relay instantaneous opening, 3 NO circuit(s), volt-free</li><li>Number of Additional Circuits: 1 solid-state output</li><li>Rated Supply Voltage ([Us]):</li><ul class="md-block-unordered-list-item"><li>24 V AC - 20...10 %</li><li>24 V DC - 20...20 %</li></ul><li>Complementary:</li><ul class="md-block-unordered-list-item"><li>Supply Frequency: 50/60 Hz</li><li>Maximum Power Consumption:</li><ul class="md-block-unordered-list-item"><li>1.2 W DC</li><li>2.5 VA AC</li></ul><li>[Uc] Control Circuit Voltage: 24 V</li><li>Breaking Capacity:</li><ul class="md-block-unordered-list-item"><li>180 VA holding AC-15 C300 relay output</li><li>1800 VA inrush AC-15 C300 relay output</li></ul><li>Output Thermal Current: 6 A per relay for relay output</li><li>[Ith] Conventional Free Air Thermal Current: 10.5 A</li><li>Associated Fuse Rating:</li><ul class="md-block-unordered-list-item"><li>4 A gG or gL for relay output conforming to EN/IEC 60947-5-1, DIN VDE 0660 part 200</li><li>6 A fast blow for relay output conforming to EN/IEC 60947-5-1, DIN VDE 0660 part 200</li></ul><li>Minimum Output Current: 10 mA for relay output</li><li>Minimum Output Voltage: 16 V for relay output</li><li>Maximum Response Time on Input Open: 100 ms</li><li>[Ui] Rated Insulation Voltage: 300 V (pollution degree 2) conforming to IEC 60947-5-1 and DIN VDE 0110 part 1</li><li>[Uimp] Rated Impulse Withstand Voltage: 4 kV overvoltage category III conforming to IEC 60947-5-1 and DIN VDE 0110 part 1</li><li>Local Signalling: 2 LEDs</li><li>Current Consumption:</li><ul class="md-block-unordered-list-item"><li>40 mA at 24 V DC on power supply</li><li>90 mA at 24 V AC on power supply</li></ul><li>Mounting Support: 35 mm symmetrical DIN rail</li><li>Net Weight: 0.16 kg</li></ul><li>Environment:</li><ul class="md-block-unordered-list-item"><li>Standards:</li><ul class="md-block-unordered-list-item"><li>EN/ISO 13850</li><li>EN/IEC 60947-5-1</li><li>EN 60204-1</li><li>EN 1088/ISO 14119</li></ul><li>Product Certifications: UL, CSA, TÜV</li><li>IP Degree of Protection:</li><ul class="md-block-unordered-list-item"><li>IP20 (terminals) conforming to EN/IEC 60529</li><li>IP40 (enclosure) conforming to EN/IEC 60529</li></ul><li>Ambient Air Temperature for Operation: -10…55 °C</li><li>Ambient Air Temperature for Storage: -25…85 °C</li></ul></ul>

<h3>Telemecanique XPSAC5121P Emergency Stop - Module Xpsac</h3>
&nbsp;This XPSAC safety module monitors emergency shutdown pushbuttons and limit switches. It meets the requirements of Performance Level PL e/Category 4 conforming to standard EN/ISO 13849-1 and SILCL3 conforming to EN/IEC 61508 and EN/IEC 62061. It can be used for monitoring emergency stop circuits conforming to standards EN/ISO 13850 and EN/IEC 60204-1. 24V AC/DC supply allows direct supply via an auxiliary transformer, like ABT7 or ABL6, allowing saving at installation time. It has removable terminals for easier and better control wires tightening, thus improving installation reliability. It has additional solid-state output for communication with PLCs about safety status of your process.&nbsp;&nbsp;
<ul>
<li>Range of Product: Preventa Safety Automation</li>
<li>Product or Component Type: Preventa Safety Module</li>
<li>Safety Module Name: XPSAC</li>
<li>Safety Module Application: For emergency stop and switch monitoring</li>
<li>Function of Module:</li>
<ul>
<li>Switch monitoring</li>
<li>Emergency stop</li>
</ul>
<li>Safety Level:</li>
<ul>
<li>Can reach PL e/Category 4 conforming to EN/ISO 13849-1</li>
<li>Can reach SILCL 3 conforming to EN/IEC 62061</li>
</ul>
<li>Safety Reliability Data:</li>
<ul>
<li>MTTFd = 210.4 years conforming to EN/ISO 13849-1</li>
<li>DC &gt; 99% conforming to EN/ISO 13849-1</li>
<li>PFHd = 3.56E-9 1/h conforming to EN/IEC 62061</li>
</ul>
<li>Type of Start: Unmonitored</li>
<li>Connections - Terminals:</li>
<ul>
<li>Captive screw clamp terminals, removable terminal block, various configurations, with double bezel</li>
</ul>
<li>Output Type: Relay instantaneous opening, 3 NO circuit(s), volt-free</li>
<li>Number of Additional Circuits: 1 solid-state output</li>
<li>Rated Supply Voltage ([Us]):</li>
<ul>
<li>24 V AC - 20...10 %</li>
<li>24 V DC - 20...20 %</li>
</ul>
<li>Complementary:</li>
<ul>
<li>Supply Frequency: 50/60 Hz</li>
<li>Maximum Power Consumption:</li>
<ul>
<li>1.2 W DC</li>
<li>2.5 VA AC</li>
</ul>
<li>[Uc] Control Circuit Voltage: 24 V</li>
<li>Breaking Capacity:</li>
<ul>
<li>180 VA holding AC-15 C300 relay output</li>
<li>1800 VA inrush AC-15 C300 relay output</li>
</ul>
<li>Output Thermal Current: 6 A per relay for relay output</li>
<li>[Ith] Conventional Free Air Thermal Current: 10.5 A</li>
<li>Associated Fuse Rating:</li>
<ul>
<li>4 A gG or gL for relay output conforming to EN/IEC 60947-5-1, DIN VDE 0660 part 200</li>
<li>6 A fast blow for relay output conforming to EN/IEC 60947-5-1, DIN VDE 0660 part 200</li>
</ul>
<li>Minimum Output Current: 10 mA for relay output</li>
<li>Minimum Output Voltage: 16 V for relay output</li>
<li>Maximum Response Time on Input Open: 100 ms</li>
<li>[Ui] Rated Insulation Voltage: 300 V (pollution degree 2) conforming to IEC 60947-5-1 and DIN VDE 0110 part 1</li>
<li>[Uimp] Rated Impulse Withstand Voltage: 4 kV overvoltage category III conforming to IEC 60947-5-1 and DIN VDE 0110 part 1</li>
<li>Local Signalling: 2 LEDs</li>
<li>Current Consumption:</li>
<ul>
<li>40 mA at 24 V DC on power supply</li>
<li>90 mA at 24 V AC on power supply</li>
</ul>
<li>Mounting Support: 35 mm symmetrical DIN rail</li>
<li>Net Weight: 0.16 kg</li>
</ul>
<li>Environment:</li>
<ul>
<li>Standards:</li>
<ul>
<li>EN/ISO 13850</li>
<li>EN/IEC 60947-5-1</li>
<li>EN 60204-1</li>
<li>EN 1088/ISO 14119</li>
</ul>
<li>Product Certifications: UL, CSA, TÜV</li>
<li>IP Degree of Protection:</li>
<ul>
<li>IP20 (terminals) conforming to EN/IEC 60529</li>
<li>IP40 (enclosure) conforming to EN/IEC 60529</li>
</ul>
<li>Ambient Air Temperature for Operation: -10…55 °C</li>
<li>Ambient Air Temperature for Storage: -25…85 °C</li>
</ul>
</ul>