FLUKE

HIOKI

KYORITSU

MEGGER

Test & Measurement

test-measurement

Calibrators

calibrators

Clamp Meters

clamp-meters

Electrical Power Testing

electrical-power-testing

Insulation Testers

insulation-testers

Multimeters

multimeters

 Megger DET24C Earth Resistance Clamp Testers

The DET14C and DET24C represent a new generation of earth/ground clamp-on resistance testers. These instruments induce a test current into earth systems and measure ground resistance in multi ground installations without needing to disconnect the ground. They offer market leading access, advanced features, simple operation and CAT IV 600 V safety protection. 

This clamp-on stake-less ground tester can also:

Balance elements of a ground to mitigate noise

Measure continuity of ground circuits in headends and hubs

The elliptical shaped head design offers improved access to cables and earth straps in space constrained locations. The clamp head accommodates up to 37 mm diameter cable and 50 mm earth tapes making them suitable for use in power stations, substations, towers and many more facilities. 

Elliptical clamp shape improves access to earth cables and straps up to 50 mm

Measures ground resistance from 0.05 Ω to 1500 Ω

Measures true RMS ground leakage current from 0.5 mA rms to 35 A rms

<h3 class="md-block-header-three"> Megger DET24C Earth Resistance Clamp Testers</h3>The DET14C and DET24C represent a new generation of earth/ground clamp-on resistance testers. These instruments induce a test current into earth systems and measure ground resistance in multi ground installations without needing to disconnect the ground. They offer market leading access, advanced features, simple operation and CAT IV 600 V safety protection. This clamp-on stake-less ground tester can also:<ul class="md-block-unordered-list-item"><li>Balance elements of a ground to mitigate noise</li><li>Balance ground circuits</li><li>Measure continuity of ground circuits in headends and hubs</li></ul>The elliptical shaped head design offers improved access to cables and earth straps in space constrained locations. The clamp head accommodates up to 37 mm diameter cable and 50 mm earth tapes making them suitable for use in power stations, substations, towers and many more facilities. <ul class="md-block-unordered-list-item"><li>Elliptical clamp shape improves access to earth cables and straps up to 50 mm</li><li>Low maintenance flat jaw interface</li><li>Measures ground resistance from 0.05 Ω to 1500 Ω</li><li>Measures true RMS ground leakage current from 0.5 mA rms to 35 A rms</li><li>CAT IV 600 V safety rating</li><li>Backlit LCD display</li></ul>

<h3> Megger DET24C Earth Resistance Clamp Testers</h3>
The DET14C and DET24C represent a new generation of earth/ground clamp-on resistance testers. These instruments induce a test current into earth systems and measure ground resistance in multi ground installations without needing to disconnect the ground. They offer market leading access, advanced features, simple operation and CAT IV 600 V safety protection.&nbsp;
This clamp-on stake-less ground tester can also:
<ul>
<li>Balance elements of a ground to mitigate noise</li>
<li>Balance ground circuits</li>
<li>Measure continuity of ground circuits in headends and hubs</li>
</ul>
The elliptical shaped head design offers improved access to cables and earth straps in space constrained locations. The clamp head accommodates up to 37 mm diameter cable and 50 mm earth tapes making them suitable for use in power stations, substations, towers and many more facilities.&nbsp;
<ul>
<li>Elliptical clamp shape improves access to earth cables and straps up to 50 mm</li>
<li>Low maintenance flat jaw interface</li>
<li>Measures ground resistance from 0.05 Ω to 1500 Ω</li>
<li>Measures true RMS ground leakage current from 0.5 mA rms to 35 A rms</li>
<li>CAT IV 600 V safety rating</li>
<li>Backlit LCD display</li>
</ul>

Extech

ACISION

Center

TRIPLETT

PCE Instruments

AMPROBE

Fluke Networks

Other Measuring Tools

Industrial Thermometer

Sound & Vibration Meters

Thermal Imaging Cameras

Humidity & Temperature

Multimeter Leads

CETM

Megger DET24C Earth Resistance Clamp Testers

megger det24c earth resistance clamp testers penguji penjepit ketahanan bumi meters pengapit rintangan megger/麦格 接地电阻钳形测试仪 麦格

megger-det24c-earth-resistance-clamp-testers

 Megger DET14C Earth Resistance Clamp Testers

<h3 class="md-block-header-three"> Megger DET14C Earth Resistance Clamp Testers</h3>The DET14C and DET24C represent a new generation of earth/ground clamp-on resistance testers. These instruments induce a test current into earth systems and measure ground resistance in multi ground installations without needing to disconnect the ground. They offer market leading access, advanced features, simple operation and CAT IV 600 V safety protection. This clamp-on stake-less ground tester can also:<ul class="md-block-unordered-list-item"><li>Balance elements of a ground to mitigate noise</li><li>Balance ground circuits</li><li>Measure continuity of ground circuits in headends and hubs</li></ul>The elliptical shaped head design offers improved access to cables and earth straps in space constrained locations. The clamp head accommodates up to 37 mm diameter cable and 50 mm earth tapes making them suitable for use in power stations, substations, towers and many more facilities. <ul class="md-block-unordered-list-item"><li>Elliptical clamp shape improves access to earth cables and straps up to 50 mm</li><li>Low maintenance flat jaw interface</li><li>Measures ground resistance from 0.05 Ω to 1500 Ω</li><li>Measures true RMS ground leakage current from 0.5 mA rms to 35 A rms</li><li>CAT IV 600 V safety rating</li><li>Backlit LCD display</li></ul>

<h3> Megger DET14C Earth Resistance Clamp Testers</h3>
The DET14C and DET24C represent a new generation of earth/ground clamp-on resistance testers. These instruments induce a test current into earth systems and measure ground resistance in multi ground installations without needing to disconnect the ground. They offer market leading access, advanced features, simple operation and CAT IV 600 V safety protection.&nbsp;
This clamp-on stake-less ground tester can also:
<ul>
<li>Balance elements of a ground to mitigate noise</li>
<li>Balance ground circuits</li>
<li>Measure continuity of ground circuits in headends and hubs</li>
</ul>
The elliptical shaped head design offers improved access to cables and earth straps in space constrained locations. The clamp head accommodates up to 37 mm diameter cable and 50 mm earth tapes making them suitable for use in power stations, substations, towers and many more facilities.&nbsp;
<ul>
<li>Elliptical clamp shape improves access to earth cables and straps up to 50 mm</li>
<li>Low maintenance flat jaw interface</li>
<li>Measures ground resistance from 0.05 Ω to 1500 Ω</li>
<li>Measures true RMS ground leakage current from 0.5 mA rms to 35 A rms</li>
<li>CAT IV 600 V safety rating</li>
<li>Backlit LCD display</li>
</ul>

DET14C_DET24C_DS_en

Megger DET14C Earth Resistance Clamp Testers

megger det14c earth resistance clamp testers penguji penjepit ketahanan bumi meters pengapit rintangan megger/麦格 接地电阻钳形测试仪 麦格

megger-det14c-earth-resistance-clamp-testers

 • Dust and drip proof. (designed to IEC 529 IP54)
 • In addition to the facility for precision measurement, test leads for simplified two wire 
    measuring system also supplied as standard accessories (unit can be hung from the neck for 
    simplified measurement)
• Designed to meet IEC 61010-1 safety standard.
• Capable of measuring earth voltage.
• Automatic warning when resistance of auxiliary earth spikes is in excess of tolerance.
• Small and lightweight. Shock resistant new case material.
• 2mA measuring current permits earth resistance tests without tripping earth leakage current breakers in the circuit under test. 

• Dust and drip proof. (designed to IEC 529 IP54) • In addition to the facility for precision measurement, test leads for simplified two wire measuring system also supplied as standard accessories (unit can be hung from the neck for simplified measurement) • Designed to meet IEC 61010-1 safety standard. • Capable of measuring earth voltage. • Automatic warning when resistance of auxiliary earth spikes is in excess of tolerance. • Small and lightweight. Shock resistant new case material. • 2mA measuring current permits earth resistance tests without tripping earth leakage current breakers in the circuit under test.

&nbsp;• Dust and drip proof. (designed to IEC 529 IP54) 
 • In addition to the facility for precision measurement, test leads for simplified two wire 
 measuring system also supplied as standard accessories (unit can be hung from the neck for 
 simplified measurement) 
• Designed to meet IEC 61010-1 safety standard. 
• Capable of measuring earth voltage. 
• Automatic warning when resistance of auxiliary earth spikes is in excess of tolerance. 
• Small and lightweight. Shock resistant new case material. 
• 2mA measuring current permits earth resistance tests without tripping earth leakage current breakers in the circuit under test.&nbsp;

4105AH DATASHEET

PRO'SKIT

SANWA METER

Others

CHIAYO

RAACO

SHOW

KYORITSU INSTRUMENTS

Microphone

Tools Organizers

Soldering & Brazing Equipment

Motor Rotation/Phase

Toolboxes

Multiple Tools Sets

Flossie Chua

buyerIntroduction

Kyoritsu Digital Earth Meter 4105AH (valid for Singapore Purchases Only)

kyoritsu digital earth meter 4105ah (valid singapore purchases only) electrical power testing pengujian daya listrik meteran bumi ujian tenaga elektrik kyoritsu/协立 共立数字地球仪4105ah 电力测试 协立

kyoritsu-digital-earth-meter-4105ah-valid-for-singapore-purchases-only

The Fluke 1503 is a great choice for basic residential and commercial electrical insulation testing. This rugged, compact tool fits in the palm of your hand. The 1503 is the same form factor as the Fluke 1507 but with a few less features. You can count on it to handle the most common tests at a most affordable price. Additional features, like the remote probe, reduce the time needed to perform repetitive testing.  

A rugged, compact insulation resistance tester for residential and commercial electricians

Performs insulation tests from 0.01 MΩ to 2000 MΩ

Offers two insulation test voltages: 500 V and 1000 V

Includes live circuit detection to prevent insulation test if voltage >30 V is detected

Measures resistance from 0.01 Ω to 20.00 kΩ

Measures AC/DC voltage from 0.1 V to 600 V

Includes auto-discharge of capacitive voltage for added user protection

Provides lo-ohms earth-bond continuity (200 mA)

Simplifies repetitive or hard-to-reach testing with the remote test probe

Presents results on a large, backlit display

Features CAT IV 600 V overvoltage category rating

Comes with remote probe, test leads, test probes, alligator clips, and one-year warranty

Accepts optional Fluke TPAK magnetic hanging system to free your hands for other work

Runs on four AA alkaline batteries (NEDA 15 A or IEC LR6) for at least 1000 insulation tests

<h3 class="md-block-header-three">Fluke 1503 Insulation Resistance Meter</h3>The Fluke 1503 is a great choice for basic residential and commercial electrical insulation testing. This rugged, compact tool fits in the palm of your hand. The 1503 is the same form factor as the Fluke 1507 but with a few less features. You can count on it to handle the most common tests at a most affordable price. Additional features, like the remote probe, reduce the time needed to perform repetitive testing. <ul class="md-block-unordered-list-item"><li>A rugged, compact insulation resistance tester for residential and commercial electricians</li><li>Performs insulation tests from 0.01 MΩ to 2000 MΩ</li><li>Offers two insulation test voltages: 500 V and 1000 V</li><li>Includes live circuit detection to prevent insulation test if voltage &gt;30 V is detected</li><li>Measures resistance from 0.01 Ω to 20.00 kΩ</li><li>Measures AC/DC voltage from 0.1 V to 600 V</li><li>Includes auto-discharge of capacitive voltage for added user protection</li><li>Provides lo-ohms earth-bond continuity (200 mA)</li><li>Simplifies repetitive or hard-to-reach testing with the remote test probe</li><li>Saves battery power with auto power off</li><li>Presents results on a large, backlit display</li><li>Features CAT IV 600 V overvoltage category rating</li><li>Comes with remote probe, test leads, test probes, alligator clips, and one-year warranty</li><li>Accepts optional Fluke TPAK magnetic hanging system to free your hands for other work</li><li>Runs on four AA alkaline batteries (NEDA 15 A or IEC LR6) for at least 1000 insulation tests</li></ul>

<h3>Fluke 1503 Insulation Resistance Meter</h3>
The Fluke 1503 is a great choice for basic residential and commercial electrical insulation testing. This rugged, compact tool fits in the palm of your hand. The 1503 is the same form factor as the Fluke 1507 but with a few less features. You can count on it to handle the most common tests at a most affordable price. Additional features, like the remote probe, reduce the time needed to perform repetitive testing.&nbsp;&nbsp;
<ul>
<li>A rugged, compact insulation resistance tester for residential and commercial electricians</li>
<li>Performs insulation tests from 0.01 MΩ to 2000 MΩ</li>
<li>Offers two insulation test voltages: 500 V and 1000 V</li>
<li>Includes live circuit detection to prevent insulation test if voltage &gt;30 V is detected</li>
<li>Measures resistance from 0.01 Ω to 20.00 kΩ</li>
<li>Measures AC/DC voltage from 0.1 V to 600 V</li>
<li>Includes auto-discharge of capacitive voltage for added user protection</li>
<li>Provides lo-ohms earth-bond continuity (200 mA)</li>
<li>Simplifies repetitive or hard-to-reach testing with the remote test probe</li>
<li>Saves battery power with auto power off</li>
<li>Presents results on a large, backlit display</li>
<li>Features CAT IV 600 V overvoltage category rating</li>
<li>Comes with remote probe, test leads, test probes, alligator clips, and one-year warranty</li>
<li>Accepts optional Fluke TPAK magnetic hanging system to free your hands for other work</li>
<li>Runs on four AA alkaline batteries (NEDA 15 A or IEC LR6) for at least 1000 insulation tests</li>
</ul>

Fluke 1503 Insulation Resistance Meter

fluke 1503 insulation resistance meter pengukur resistansi isolasi testers rintangan penebat fluke/福禄克 绝缘电阻表 福禄克

fluke-1503-insulation-resistance-meter

Dust and drip proof.(designed to IEC 529 IP54)

In addition to the facility for precision measurement, test leads for simplified two wire measuring system also supplied as standard accessories.

(unit can be hung from the neck for simplified measurement)

Designed to meet IEC 61010-1 safety standard.

Automatic warning when resistance of auxiliary earth spikes is in excess of tolerance.

Small and lightweight. Shock resistant new case material.

2mA measuring current permits earth resistance tests without tripping earth leakage current breakers in the circuit under test.

<ul class="md-block-unordered-list-item"><li>Dust and drip proof.(designed to IEC 529 IP54)</li><li>In addition to the facility for precision measurement, test leads for simplified two wire measuring system also supplied as standard accessories.</li><li>(unit can be hung from the neck for simplified measurement)</li><li>Designed to meet IEC 61010-1 safety standard.</li><li>Capable of measuring earth voltage.</li><li>Automatic warning when resistance of auxiliary earth spikes is in excess of tolerance.</li><li>Small and lightweight. Shock resistant new case material.</li><li>2mA measuring current permits earth resistance tests without tripping earth leakage current breakers in the circuit under test.</li></ul>

<ul>
<li>Dust and drip proof.(designed to IEC 529 IP54)</li>
<li>In addition to the facility for precision measurement, test leads for simplified two wire measuring system also supplied as standard accessories.</li>
<li>(unit can be hung from the neck for simplified measurement)</li>
<li>Designed to meet IEC 61010-1 safety standard.</li>
<li>Capable of measuring earth voltage.</li>
<li>Automatic warning when resistance of auxiliary earth spikes is in excess of tolerance.</li>
<li>Small and lightweight. Shock resistant new case material.</li>
<li>2mA measuring current permits earth resistance tests without tripping earth leakage current breakers in the circuit under test.</li>
</ul>

Measurement

Ranges

Accuracy

Overload Protection

Safety Standard

Applicable Standards

Withstand Voltage

Power Source

Dimensions

Weight

Motor Rotation & Phase

Ming Yang

Kyoritsu Digital Earth Tester 4105A (valid for Singapore Purchases Only)

kyoritsu digital earth tester 4105a (valid singapore purchases only) electrical power testing pengujian daya listrik ujian tenaga elektrik kyoritsu/协立 共立数字地球测试仪4105a 电力测试 协立

kyoritsu-digital-earth-tester-4105a-valid-for-singapore-purchases-only

Fluke 1664 Fc Installation Multifunction Testers 

The Fluke 1664 FC is the only tester with “Insulation PreTest” that stops the insulation test and provides a visual warning if it detects that an appliance is connected to the system under test. This helps you avoid potentially serious and costly mistakes that can cause damage to your customers’ peripheral equipment.

Auto Test performs up to seven installation tests in one sequence, ensuring compliance with local installation regulations. This reduces the number of manual connections, thus decreasing the possibility of errors and reducing test time.

Because the 1664 FC is Fluke Connect®-enabled, you can send test results to your smartphone, save them to the cloud, and share measurements in real time with team members through a ShareLive video call. It’s the fastest way to let your team see what you see, and to help you get approvals without leaving the field.

Fluke Cloud™ storage allows you to retrieve stored results whether you are in the office or in the field to make decisions in real time. You get world-class data protection and you can import the data into Fluke DMS (Data Management Software) to process and generate certificates. 

Compact, lightweight (less than 1.3 kg) with padded neck-strap to free your hands

Rotary dial knob clearly indicates which function is selected, all in one spot with no complex multi-level menus.

Offers additional high current loop mode for faster measurements than loop tests with non-trip mode for RCDs

Includes Z-max memory for loop tests to support easy evaluation of the highest loop test value

Provides unique zero adapter for fast, reliable and accurate test lead and mains cord compensation

Performs fast voltage measurement between L-N, L-PE, and N-PE using the mains cord. No need to change measurement connections

Measures RCD trip current and trip time in parallel (RCD type AC and A)

Measures PEFC or PSC and loop impedance in parallel and displays them together on the dual display

Offers ring testing so you can select the required input sockets with soft keys and not have to exchange test leads

Uses continuity test currents to measure motor windings

Detects raised earth voltages > 50 V with Earth Volt Touchpad, indicating potential dangerous situations

Features large display with backlight, clear symbols, and exceptionally wide viewing angle for easy and safe readings

<h3 class="md-block-header-three">Fluke 1664 Fc Installation Multifunction Testers </h3>The Fluke 1664 FC is the only tester with “Insulation PreTest” that stops the insulation test and provides a visual warning if it detects that an appliance is connected to the system under test. This helps you avoid potentially serious and costly mistakes that can cause damage to your customers’ peripheral equipment.Auto Test reduces test timeAuto Test performs up to seven installation tests in one sequence, ensuring compliance with local installation regulations. This reduces the number of manual connections, thus decreasing the possibility of errors and reducing test time.Save time and enhance collaborationBecause the 1664 FC is Fluke Connect®-enabled, you can send test results to your smartphone, save them to the cloud, and share measurements in real time with team members through a ShareLive video call. It’s the fastest way to let your team see what you see, and to help you get approvals without leaving the field.Retrieve stored results from anywhereFluke Cloud™ storage allows you to retrieve stored results whether you are in the office or in the field to make decisions in real time. You get world-class data protection and you can import the data into Fluke DMS (Data Management Software) to process and generate certificates. <ul class="md-block-unordered-list-item"><li>Compact, lightweight (less than 1.3 kg) with padded neck-strap to free your hands</li><li>Rotary dial knob clearly indicates which function is selected, all in one spot with no complex multi-level menus.</li><li>Offers additional high current loop mode for faster measurements than loop tests with non-trip mode for RCDs</li><li>Includes Z-max memory for loop tests to support easy evaluation of the highest loop test value</li><li>Provides unique zero adapter for fast, reliable and accurate test lead and mains cord compensation</li><li>Performs fast voltage measurement between L-N, L-PE, and N-PE using the mains cord. No need to change measurement connections</li><li>Measures RCD trip current and trip time in parallel (RCD type AC and A)</li><li>Measures PEFC or PSC and loop impedance in parallel and displays them together on the dual display</li><li>Offers ring testing so you can select the required input sockets with soft keys and not have to exchange test leads</li><li>Uses continuity test currents to measure motor windings</li><li>Detects raised earth voltages &gt; 50 V with Earth Volt Touchpad, indicating potential dangerous situations</li><li>Features large display with backlight, clear symbols, and exceptionally wide viewing angle for easy and safe readings</li><li>Offers extended three-layer memory</li></ul>

<h3>Fluke 1664 Fc Installation Multifunction Testers&nbsp;</h3>
The Fluke 1664 FC is the only tester with “Insulation PreTest” that stops the insulation test and provides a visual warning if it detects that an appliance is connected to the system under test. This helps you avoid potentially serious and costly mistakes that can cause damage to your customers’ peripheral equipment.
Auto Test reduces test time
Auto Test performs up to seven installation tests in one sequence, ensuring compliance with local installation regulations. This reduces the number of manual connections, thus decreasing the possibility of errors and reducing test time.
Save time and enhance collaboration
Because the 1664 FC is Fluke Connect®-enabled, you can send test results to your smartphone, save them to the cloud, and share measurements in real time with team members through a ShareLive video call. It’s the fastest way to let your team see what you see, and to help you get approvals without leaving the field.
Retrieve stored results from anywhere
Fluke Cloud™ storage allows you to retrieve stored results whether you are in the office or in the field to make decisions in real time. You get world-class data protection and you can import the data into Fluke DMS (Data Management Software) to process and generate certificates.&nbsp;
<ul>
<li>Compact, lightweight (less than 1.3 kg) with padded neck-strap to free your hands</li>
<li>Rotary dial knob clearly indicates which function is selected, all in one spot with no complex multi-level menus.</li>
<li>Offers additional high current loop mode for faster measurements than loop tests with non-trip mode for RCDs</li>
<li>Includes Z-max memory for loop tests to support easy evaluation of the highest loop test value</li>
<li>Provides unique zero adapter for fast, reliable and accurate test lead and mains cord compensation</li>
<li>Performs fast voltage measurement between L-N, L-PE, and N-PE using the mains cord. No need to change measurement connections</li>
<li>Measures RCD trip current and trip time in parallel (RCD type AC and A)</li>
<li>Measures PEFC or PSC and loop impedance in parallel and displays them together on the dual display</li>
<li>Offers ring testing so you can select the required input sockets with soft keys and not have to exchange test leads</li>
<li>Uses continuity test currents to measure motor windings</li>
<li>Detects raised earth voltages &gt; 50 V with Earth Volt Touchpad, indicating potential dangerous situations</li>
<li>Features large display with backlight, clear symbols, and exceptionally wide viewing angle for easy and safe readings</li>
<li>Offers extended three-layer memory</li>
</ul>

Fluke 1664 Fc Installation Multifunction Testers

fluke 1664 fc installation multifunction testers penguji multifungsi instalasi electrical power testing pengujian daya listrik pelbagai fungsi pemasangan ujian tenaga elektrik fluke/福禄克 安装多功能测试仪 电力测试 福禄克

fluke-1664-fc-installation-multifunction-testers

The Fluke 787B ProcessMeter™ doubles your troubleshooting capabilities by combining the power of a safety rated digital multimeter and mA loop calibrator into a single, compact test tool. Based on the trusted measurement capabilities of the Fluke 87V meter, the 787B adds the ability to measure, source and simulate mA with the accuracy and resolution you would expect from a Fluke mA loop calibrator, giving you the ideal tool for troubleshooting and calibrating current loop applications. 

With Fluke Connect® mobile app and desktop software compatibility, technicians can wirelessly monitor, log, and share data from the field with their team anytime, from anywhere.* If you’re looking for even more troubleshooting power, the Fluke 789 ProcessMeter™ offers technicians even more flexibility, and even includes a built-in 24 V loop power supply.

*Requires Fluke IR3000FC module (not included). Not all models are available in all countries. Check with your local Fluke representative.

The Fluke 787B not only allows you to source, measure and simulate 20 mA DC current but also allows you simultaneously look at mA and percent of scale readouts so you can easily compare readings to what you see on your controller. Manually step mA signals (100%, 25%, Coarse adjustment, Fine adjustment) or use the Auto step and Auto ramp feature to work even more efficiently.

Designed to meet 1000 V IEC 61010 CAT III and 600 V CAT IV standards, the Fluke 787B is also a full-featured, precision, true-rms digital multimeter with standard features for diode testing and a continuity beeper. Troubleshoot more, while carrying less. The 787B also allows you to make frequency measurements to 20 kHz and includes Min/Max/Average/Hold/Relative modes for easy operation. Even the batteries and fuses are easily accessible allowing you to make fast, easy changes. 

Compact digital multimeter and mA loop calibrator solution

Measure/Source/Simulate loop currents while powering the loop

Manual and automatic ramp up – ramp down functions

Range and Resolution: 400.0 mV, 4.000 V, 40.00 V, 400.0 V, 1000 V

Range and Resolution: 1.000 A (0.440 A continuous)

Range and Resolution: 400.0 Ohms, 4.000 k, 40.00 k, 400.0 k, 4.0 M, 40 M

Range and Resolution: 199.99 Hz, 1999.9 Hz, 19.999 kHz

Range and Resolution: 2.000 V (shows diode voltage drop)

DC Current Output (Internal Battery Operation):


Range and Resolution: 0.000 to 20.000 mA or 4.000 to 20.000 mA (selectable at power-up), Over-range to 24.000 mA

Drive Capability: 24 V compliance or 1,200 ohms @ 20 mA

DC Current Simulate (External 15 V to 48 V Loop Supply):


Automatic: Slow Ramp, Fast Ramp, 25% step

Temperature Range: 18 °C to 28 °C, for one year after calibration

Maximum Voltage Applied Between Any Jack and Earth Ground: 1000 V RMS

Temperature Coefficient: 0.05 x (specified accuracy) per °C (for temperatures < 18 °C or > 28 °C)

Safety: IEC61010-1, Pollution Degree 2/IEC61010-2-033, CAT IV 600 V/CAT III 1000 V

Size (HxWxL): 50 x 100 x 203 mm (1.97 x 3.94 x 8.00 in)

<h3 class="md-block-header-three"> Fluke 787B Processmeter</h3>The Fluke 787B ProcessMeter™ doubles your troubleshooting capabilities by combining the power of a safety rated digital multimeter and mA loop calibrator into a single, compact test tool. Based on the trusted measurement capabilities of the Fluke 87V meter, the 787B adds the ability to measure, source and simulate mA with the accuracy and resolution you would expect from a Fluke mA loop calibrator, giving you the ideal tool for troubleshooting and calibrating current loop applications. With Fluke Connect® mobile app and desktop software compatibility, technicians can wirelessly monitor, log, and share data from the field with their team anytime, from anywhere.* If you’re looking for even more troubleshooting power, the Fluke 789 ProcessMeter™ offers technicians even more flexibility, and even includes a built-in 24 V loop power supply.*Requires Fluke IR3000FC module (not included). Not all models are available in all countries. Check with your local Fluke representative.Expand your troubleshooting capabilitiesThe Fluke 787B not only allows you to source, measure and simulate 20 mA DC current but also allows you simultaneously look at mA and percent of scale readouts so you can easily compare readings to what you see on your controller. Manually step mA signals (100%, 25%, Coarse adjustment, Fine adjustment) or use the Auto step and Auto ramp feature to work even more efficiently.Designed to meet 1000 V IEC 61010 CAT III and 600 V CAT IV standards, the Fluke 787B is also a full-featured, precision, true-rms digital multimeter with standard features for diode testing and a continuity beeper. Troubleshoot more, while carrying less. The 787B also allows you to make frequency measurements to 20 kHz and includes Min/Max/Average/Hold/Relative modes for easy operation. Even the batteries and fuses are easily accessible allowing you to make fast, easy changes. <ul class="md-block-unordered-list-item"><li>Compact digital multimeter and mA loop calibrator solution</li><li>Measure/Source/Simulate loop currents while powering the loop</li><li>Manual and automatic ramp up – ramp down functions</li><li>Easy-to-read backlit display </li></ul><h3 class="md-block-header-three">Measurement Function</h3><ul class="md-block-unordered-list-item"><li>V DC: </li><ul class="md-block-unordered-list-item"><li>Range and Resolution: 400.0 mV, 4.000 V, 40.00 V, 400.0 V, 1000 V</li><li>Best Accuracy: 0.1% + 1</li></ul><li>V AC (True-RMS): </li><ul class="md-block-unordered-list-item"><li>Range and Resolution: 400.0 mV, 4.000 V, 40.00 V, 400.0 V, 1000 V</li><li>Best Accuracy: 0.7% + 2</li></ul><li>mA DC: </li><ul class="md-block-unordered-list-item"><li>Range and Resolution: 30.000 mA</li><li>Best Accuracy: 0.05% + 2</li></ul><li>A DC: </li><ul class="md-block-unordered-list-item"><li>Range and Resolution: 1.000 A (0.440 A continuous)</li><li>Best Accuracy: 0.2% + 2</li></ul><li>A AC: </li><ul class="md-block-unordered-list-item"><li>Range and Resolution: 1.000 A (0.440 A continuous)</li><li>Best Accuracy: 1% + 2</li></ul><li>Resistance: </li><ul class="md-block-unordered-list-item"><li>Range and Resolution: 400.0 Ohms, 4.000 k, 40.00 k, 400.0 k, 4.0 M, 40 M</li><li>Best Accuracy: 0.2% + 1</li></ul><li>Frequency (0.5 Hz to 20 kHz): </li><ul class="md-block-unordered-list-item"><li>Range and Resolution: 199.99 Hz, 1999.9 Hz, 19.999 kHz</li><li>Best Accuracy: 0.005% + 1</li></ul><li>Diode Test: </li><ul class="md-block-unordered-list-item"><li>Range and Resolution: 2.000 V (shows diode voltage drop)</li><li>Best Accuracy: 2% + 1</li></ul><li>Continuity: </li><ul class="md-block-unordered-list-item"><li>Beeps for resistance &lt; approx. 100 ohms</li></ul></ul><h3 class="md-block-header-three">Output Function</h3><ul class="md-block-unordered-list-item"><li>DC Current Output (Internal Battery Operation): </li><ul class="md-block-unordered-list-item"><li>Range and Resolution: 0.000 to 20.000 mA or 4.000 to 20.000 mA (selectable at power-up), Over-range to 24.000 mA</li><li>Drive Capability: 24 V compliance or 1,200 ohms @ 20 mA</li><li>Accuracy: 0.05%</li></ul><li>DC Current Simulate (External 15 V to 48 V Loop Supply): </li><ul class="md-block-unordered-list-item"><li>Range and Resolution: 0.000 to 20.000 mA or 4.000 to 20.000 mA (selectable at power-up), Over-range to 24.000 mA</li><li>Drive Capability: 1000 ohms @ 20 mA</li><li>Accuracy: 0.05%</li></ul><li>Current Adjustment Modes: </li><ul class="md-block-unordered-list-item"><li>Manual: Coarse, Fine, 25% and 100% step</li><li>Automatic: Slow Ramp, Fast Ramp, 25% step</li></ul></ul><h3 class="md-block-header-three">Temperature Range</h3><ul class="md-block-unordered-list-item"><li>Temperature Range: 18 °C to 28 °C, for one year after calibration</li></ul><h3 class="md-block-header-three">General Specifications</h3><ul class="md-block-unordered-list-item"><li>Maximum Voltage Applied Between Any Jack and Earth Ground: 1000 V RMS</li><li>Storage Temperature: -40 °C to 60 °C</li><li>Operating Temperature: -20 °C to 55 °C</li><li>Temperature Coefficient: 0.05 x (specified accuracy) per °C (for temperatures &lt; 18 °C or &gt; 28 °C)</li><li>Relative Humidity: </li><ul class="md-block-unordered-list-item"><li>95% up to 30 °C</li><li>75% up to 40 °C</li><li>45% up to 50 °C</li><li>35% up to 55 °C</li></ul><li>Vibration: Random, 2 g, 5-500 Hz</li><li>Shock: 1 meter drop test</li><li>Safety: IEC61010-1, Pollution Degree 2/IEC61010-2-033, CAT IV 600 V/CAT III 1000 V</li><li>Size (HxWxL): 50 x 100 x 203 mm (1.97 x 3.94 x 8.00 in)</li><li>Weight: 600 g (1.3 lbs)</li><li>Battery: Four AA alkaline batteries</li><li>Battery Life: </li><ul class="md-block-unordered-list-item"><li>140 hours typical (measurement)</li><li>10 hours typical (sourcing 12 mA)</li></ul><li>Warranty: Three years</li></ul>

<h3> Fluke 787B Processmeter</h3>
The Fluke 787B ProcessMeter™ doubles your troubleshooting capabilities by combining the power of a safety rated digital multimeter and mA loop calibrator into a single, compact test tool. Based on the trusted measurement capabilities of the Fluke 87V meter, the 787B adds the ability to measure, source and simulate mA with the accuracy and resolution you would expect from a Fluke mA loop calibrator, giving you the ideal tool for troubleshooting and calibrating current loop applications.&nbsp;
With Fluke Connect® mobile app and desktop software compatibility, technicians can wirelessly monitor, log, and share data from the field with their team anytime, from anywhere.* If you’re looking for even more troubleshooting power, the Fluke 789 ProcessMeter™ offers technicians even more flexibility, and even includes a built-in 24 V loop power supply.
*Requires Fluke IR3000FC module (not included). Not all models are available in all countries. Check with your local Fluke representative.
Expand your troubleshooting capabilities
The Fluke 787B not only allows you to source, measure and simulate 20 mA DC current but also allows you simultaneously look at mA and percent of scale readouts so you can easily compare readings to what you see on your controller. Manually step mA signals (100%, 25%, Coarse adjustment, Fine adjustment) or use the Auto step and Auto ramp feature to work even more efficiently.
Designed to meet 1000 V IEC 61010 CAT III and 600 V CAT IV standards, the Fluke 787B is also a full-featured, precision, true-rms digital multimeter with standard features for diode testing and a continuity beeper. Troubleshoot more, while carrying less. The 787B also allows you to make frequency measurements to 20 kHz and includes Min/Max/Average/Hold/Relative modes for easy operation. Even the batteries and fuses are easily accessible allowing you to make fast, easy changes.&nbsp;
<ul>
<li>Compact digital multimeter and mA loop calibrator solution</li>
<li>Measure/Source/Simulate loop currents while powering the loop</li>
<li>Manual and automatic ramp up – ramp down functions</li>
<li>Easy-to-read backlit display&nbsp;</li>
</ul>
<h3>Measurement Function</h3>
<ul>
<li>V DC: 
</li>
<ul>
<li>Range and Resolution: 400.0 mV, 4.000 V, 40.00 V, 400.0 V, 1000 V</li>
<li>Best Accuracy: 0.1% + 1</li>
</ul>
<li>V AC (True-RMS): 
</li>
<ul>
<li>Range and Resolution: 400.0 mV, 4.000 V, 40.00 V, 400.0 V, 1000 V</li>
<li>Best Accuracy: 0.7% + 2</li>
</ul>
<li>mA DC: 
</li>
<ul>
<li>Range and Resolution: 30.000 mA</li>
<li>Best Accuracy: 0.05% + 2</li>
</ul>
<li>A DC: 
</li>
<ul>
<li>Range and Resolution: 1.000 A (0.440 A continuous)</li>
<li>Best Accuracy: 0.2% + 2</li>
</ul>
<li>A AC: 
</li>
<ul>
<li>Range and Resolution: 1.000 A (0.440 A continuous)</li>
<li>Best Accuracy: 1% + 2</li>
</ul>
<li>Resistance: 
</li>
<ul>
<li>Range and Resolution: 400.0 Ohms, 4.000 k, 40.00 k, 400.0 k, 4.0 M, 40 M</li>
<li>Best Accuracy: 0.2% + 1</li>
</ul>
<li>Frequency (0.5 Hz to 20 kHz): 
</li>
<ul>
<li>Range and Resolution: 199.99 Hz, 1999.9 Hz, 19.999 kHz</li>
<li>Best Accuracy: 0.005% + 1</li>
</ul>
<li>Diode Test: 
</li>
<ul>
<li>Range and Resolution: 2.000 V (shows diode voltage drop)</li>
<li>Best Accuracy: 2% + 1</li>
</ul>
<li>Continuity: 
</li>
<ul>
<li>Beeps for resistance &lt; approx. 100 ohms</li>
</ul>
</ul>
<h3>Output Function</h3>
<ul>
<li>DC Current Output (Internal Battery Operation): 
</li>
<ul>
<li>Range and Resolution: 0.000 to 20.000 mA or 4.000 to 20.000 mA (selectable at power-up), Over-range to 24.000 mA</li>
<li>Drive Capability: 24 V compliance or 1,200 ohms @ 20 mA</li>
<li>Accuracy: 0.05%</li>
</ul>
<li>DC Current Simulate (External 15 V to 48 V Loop Supply): 
</li>
<ul>
<li>Range and Resolution: 0.000 to 20.000 mA or 4.000 to 20.000 mA (selectable at power-up), Over-range to 24.000 mA</li>
<li>Drive Capability: 1000 ohms @ 20 mA</li>
<li>Accuracy: 0.05%</li>
</ul>
<li>Current Adjustment Modes: 
</li>
<ul>
<li>Manual: Coarse, Fine, 25% and 100% step</li>
<li>Automatic: Slow Ramp, Fast Ramp, 25% step</li>
</ul>
</ul>
<h3>Temperature Range</h3>
<ul>
<li>Temperature Range: 18 °C to 28 °C, for one year after calibration</li>
</ul>
<h3>General Specifications</h3>
<ul>
<li>Maximum Voltage Applied Between Any Jack and Earth Ground: 1000 V RMS</li>
<li>Storage Temperature: -40 °C to 60 °C</li>
<li>Operating Temperature: -20 °C to 55 °C</li>
<li>Temperature Coefficient: 0.05 x (specified accuracy) per °C (for temperatures &lt; 18 °C or &gt; 28 °C)</li>
<li>Relative Humidity: 
</li>
<ul>
<li>95% up to 30 °C</li>
<li>75% up to 40 °C</li>
<li>45% up to 50 °C</li>
<li>35% up to 55 °C</li>
</ul>
<li>Vibration: Random, 2 g, 5-500 Hz</li>
<li>Shock: 1 meter drop test</li>
<li>Safety: IEC61010-1, Pollution Degree 2/IEC61010-2-033, CAT IV 600 V/CAT III 1000 V</li>
<li>Size (HxWxL): 50 x 100 x 203 mm (1.97 x 3.94 x 8.00 in)</li>
<li>Weight: 600 g (1.3 lbs)</li>
<li>Battery: Four AA alkaline batteries</li>
<li>Battery Life: 
</li>
<ul>
<li>140 hours typical (measurement)</li>
<li>10 hours typical (sourcing 12 mA)</li>
</ul>
<li>Warranty: Three years</li>
</ul>

Fluke 787B Processmeter

fluke 787b processmeter pengukur proses calibrators fluke/福禄克 过程仪表 福禄克

fluke-787b-processmeter

Fluke 289 Flukeviewãƒâ€šã‚â® Forms Combo Kit 

TrendCapture graphically displays logged data session to quickly determine whether anomalies may have occurred.

Zoom on trend provides unprecedented ability to view and analyze TrendCapture data; zoom in up to 14 times.

Selectable AC filter (smoothing mode) helps display a steadier reading when the input signal is changing rapidly or noisy.

Adjustable recording and auto hold thresholds, specify a percentage change in the readings that begins a new event.

Large 50,000 count, 1/4 VGA dot matrix display with white backlight.

Logging function with expanded memory for unattended monitoring of signals over time. Using on-board TrendCapture users can graphically review logged readings without needing a PC. Store up to 15,000 recorded events.

Save multiple logging sessions before PC download is necessary.

Two terminal 50 ohm range with 1 milliohm resolution, 10 mA source current. Useful for measuring and comparing differences in motor winding resistance or contact resistance.

Low Pass filter for accurate voltage and frequency measurements at the same time on adjustable speed motor drives and other electrically noisy equipment.

LoZ Volts. Low impedance voltage function for eliminating ghost voltages. Also recommended when testing for absence or presence of live power.

On board help screens for measurement functions. Unsure about a function – go to that function and press the “i” button.

Real time clock for automatic time stamping of saved readings.

Relative mode to remove test lead resistance from low ohms or capacitance measurements.

True-RMS AC voltage and current for accurate measurements on non-linear signals.

Measure up to 10 A (20 A for 30 seconds).

Peak capture to record transients as fast as 250 μs.

Premium test leads and alligator clips included.

Optional magnetic hanger for easy setup and viewing while freeing your hands for other tasks.

FlukeView forms enable you to document, store and analyze individual readings or a series of measurements, then convert them into professional-looking documents.

The 289 is compatible with the Fluke ir3000 FC Infrared Connector, allowing you to share live measurements on your iOS or Android smart device with the Fluke Connect mobile app. The 289/FVF combo kit gives you a practical and affordable approach to predictive maintenance. 

Maximize productivity with the combined Fluke 289 and FlukeView® Forms Combo Kit. With built-in data logger and TrendCapture capability, the 289 helps you track down elusive, intermittent problems, monitoring equipment with any of its functions while you do other jobs. Using FlukeView Forms software allows you to overlay your logged data from six meters or six time periods to find cause and affect relationships or for condition monitoring. Turn your data into meaningful graphs and tables for a professional report or analyze individual readings or series of measurements. 

Maximum voltage between any terminal and earth ground: 1000 V

Battery type: 6 AA alkaline batteries, NEDA 15A IEC LR6

Electromagnetic compatibility: EMC EN61326-1

Vibration: Random vibration per MIL-PRF-28800F Class 2

Shock: 1 meter drop per IEC/EN 61010-1 3rd Edition

Size (H x W x L): 22.2 x 10.2 x 6 cm (8.75 x 4.03 x 2.38 in)

<h3 class="md-block-header-three">Fluke 289 Flukeviewãƒâ€šã‚â® Forms Combo Kit </h3><ul class="md-block-unordered-list-item"><li>TrendCapture graphically displays logged data session to quickly determine whether anomalies may have occurred.</li><li>Zoom on trend provides unprecedented ability to view and analyze TrendCapture data; zoom in up to 14 times.</li><li>Selectable AC filter (smoothing mode) helps display a steadier reading when the input signal is changing rapidly or noisy.</li><li>Adjustable recording and auto hold thresholds, specify a percentage change in the readings that begins a new event.</li><li>Large 50,000 count, 1/4 VGA dot matrix display with white backlight.</li><li>Logging function with expanded memory for unattended monitoring of signals over time. Using on-board TrendCapture users can graphically review logged readings without needing a PC. Store up to 15,000 recorded events.</li><li>Save multiple logging sessions before PC download is necessary.</li><li>Two terminal 50 ohm range with 1 milliohm resolution, 10 mA source current. Useful for measuring and comparing differences in motor winding resistance or contact resistance.</li><li>Low Pass filter for accurate voltage and frequency measurements at the same time on adjustable speed motor drives and other electrically noisy equipment.</li><li>LoZ Volts. Low impedance voltage function for eliminating ghost voltages. Also recommended when testing for absence or presence of live power.</li><li>On board help screens for measurement functions. Unsure about a function – go to that function and press the “i” button.</li><li>Real time clock for automatic time stamping of saved readings.</li><li>Relative mode to remove test lead resistance from low ohms or capacitance measurements.</li><li>True-RMS AC voltage and current for accurate measurements on non-linear signals.</li><li>Measure up to 10 A (20 A for 30 seconds).</li><li>100 mF capacitance range.</li><li>Peak capture to record transients as fast as 250 μs.</li><li>Premium test leads and alligator clips included.</li><li>Amp jack plugs included.</li><li>Optional magnetic hanger for easy setup and viewing while freeing your hands for other tasks.</li><li>FlukeView forms enable you to document, store and analyze individual readings or a series of measurements, then convert them into professional-looking documents.</li></ul>The 289 is compatible with the Fluke ir3000 FC Infrared Connector, allowing you to share live measurements on your iOS or Android smart device with the Fluke Connect mobile app. The 289/FVF combo kit gives you a practical and affordable approach to predictive maintenance. Maximize productivity with the combined Fluke 289 and FlukeView® Forms Combo Kit. With built-in data logger and TrendCapture capability, the 289 helps you track down elusive, intermittent problems, monitoring equipment with any of its functions while you do other jobs. Using FlukeView Forms software allows you to overlay your logged data from six meters or six time periods to find cause and affect relationships or for condition monitoring. Turn your data into meaningful graphs and tables for a professional report or analyze individual readings or series of measurements. <ul class="md-block-unordered-list-item"><li>Maximum voltage between any terminal and earth ground: 1000 V</li><li>Battery type: 6 AA alkaline batteries, NEDA 15A IEC LR6</li><li>Battery life:</li><ul class="md-block-unordered-list-item"><li>Minimum 100 hours</li><li>200 hours in logging mode</li></ul><li>Temperature:</li><ul class="md-block-unordered-list-item"><li>Operating: -20°C to 55°C</li><li>Storage: -40°C to 60°C</li></ul><li>Relative humidity:</li><ul class="md-block-unordered-list-item"><li>0 to 90% (0 to 37°C)</li><li>0 to 65% (37°C to 45°C)</li><li>0 to 45% (45°C to 55°C)</li></ul><li>Electromagnetic compatibility: EMC EN61326-1</li><li>Vibration: Random vibration per MIL-PRF-28800F Class 2</li><li>Shock: 1 meter drop per IEC/EN 61010-1 3rd Edition</li><li>Size (H x W x L): 22.2 x 10.2 x 6 cm (8.75 x 4.03 x 2.38 in)</li><li>Weight: 870.9 g (28 oz)</li><li>Multiple on screen displays: Yes</li></ul><h3 class="md-block-header-three">Functional Specifications</h3><ul class="md-block-unordered-list-item"><li>True-RMS AC bandwidth: 100 kHz</li><li>dBV/dBm: Yes</li><li>DC mV resolution: 1 μV</li><li>Megohm range: Up to 500 MΩ</li><li>Conductance: 50.00 nS</li><li>Continuity beeper: Yes</li><li>Battery/fuse access: Yes/Yes</li><li>Elapsed time clock: Yes</li><li>Time of day clock: Yes</li><li>Min-max-avg: Yes</li><li>Duty cycle: Yes</li><li>Pulse width: Yes</li><li>Isolated optical interface: Yes</li><li>Auto/touch hold: Yes</li><li>Reading memory: Yes</li><li>Log to PC: Yes</li><li>Interval/event logging: Yes</li><li>Logging memory: Up to 15,000 readings</li><li>Wireless connectivity (optional): Yes</li></ul>

<h3>Fluke 289 Flukeviewãƒâ€šã‚â® Forms Combo Kit&nbsp;</h3>
<ul>
<li>TrendCapture graphically displays logged data session to quickly determine whether anomalies may have occurred.</li>
<li>Zoom on trend provides unprecedented ability to view and analyze TrendCapture data; zoom in up to 14 times.</li>
<li>Selectable AC filter (smoothing mode) helps display a steadier reading when the input signal is changing rapidly or noisy.</li>
<li>Adjustable recording and auto hold thresholds, specify a percentage change in the readings that begins a new event.</li>
<li>Large 50,000 count, 1/4 VGA dot matrix display with white backlight.</li>
<li>Logging function with expanded memory for unattended monitoring of signals over time. Using on-board TrendCapture users can graphically review logged readings without needing a PC. Store up to 15,000 recorded events.</li>
<li>Save multiple logging sessions before PC download is necessary.</li>
<li>Two terminal 50 ohm range with 1 milliohm resolution, 10 mA source current. Useful for measuring and comparing differences in motor winding resistance or contact resistance.</li>
<li>Low Pass filter for accurate voltage and frequency measurements at the same time on adjustable speed motor drives and other electrically noisy equipment.</li>
<li>LoZ Volts. Low impedance voltage function for eliminating ghost voltages. Also recommended when testing for absence or presence of live power.</li>
<li>On board help screens for measurement functions. Unsure about a function – go to that function and press the “i” button.</li>
<li>Real time clock for automatic time stamping of saved readings.</li>
<li>Relative mode to remove test lead resistance from low ohms or capacitance measurements.</li>
<li>True-RMS AC voltage and current for accurate measurements on non-linear signals.</li>
<li>Measure up to 10 A (20 A for 30 seconds).</li>
<li>100 mF capacitance range.</li>
<li>Peak capture to record transients as fast as 250 μs.</li>
<li>Premium test leads and alligator clips included.</li>
<li>Amp jack plugs included.</li>
<li>Optional magnetic hanger for easy setup and viewing while freeing your hands for other tasks.</li>
<li>FlukeView forms enable you to document, store and analyze individual readings or a series of measurements, then convert them into professional-looking documents.</li>
</ul>
The 289 is compatible with the Fluke ir3000 FC Infrared Connector, allowing you to share live measurements on your iOS or Android smart device with the Fluke Connect mobile app. The 289/FVF combo kit gives you a practical and affordable approach to predictive maintenance.&nbsp;
Maximize productivity with the combined Fluke 289 and FlukeView® Forms Combo Kit. With built-in data logger and TrendCapture capability, the 289 helps you track down elusive, intermittent problems, monitoring equipment with any of its functions while you do other jobs. Using FlukeView Forms software allows you to overlay your logged data from six meters or six time periods to find cause and affect relationships or for condition monitoring. Turn your data into meaningful graphs and tables for a professional report or analyze individual readings or series of measurements.&nbsp;
<ul>
<li>Maximum voltage between any terminal and earth ground: 1000 V</li>
<li>Battery type: 6 AA alkaline batteries, NEDA 15A IEC LR6</li>
<li>Battery life:</li>
<ul>
<li>Minimum 100 hours</li>
<li>200 hours in logging mode</li>
</ul>
<li>Temperature:</li>
<ul>
<li>Operating: -20°C to 55°C</li>
<li>Storage: -40°C to 60°C</li>
</ul>
<li>Relative humidity:</li>
<ul>
<li>0 to 90% (0 to 37°C)</li>
<li>0 to 65% (37°C to 45°C)</li>
<li>0 to 45% (45°C to 55°C)</li>
</ul>
<li>Electromagnetic compatibility: EMC EN61326-1</li>
<li>Vibration: Random vibration per MIL-PRF-28800F Class 2</li>
<li>Shock: 1 meter drop per IEC/EN 61010-1 3rd Edition</li>
<li>Size (H x W x L): 22.2 x 10.2 x 6 cm (8.75 x 4.03 x 2.38 in)</li>
<li>Weight: 870.9 g (28 oz)</li>
<li>Multiple on screen displays: Yes</li>
</ul>
<h3>Functional Specifications</h3>
<ul>
<li>True-RMS AC bandwidth: 100 kHz</li>
<li>dBV/dBm: Yes</li>
<li>DC mV resolution: 1 μV</li>
<li>Megohm range: Up to 500 MΩ</li>
<li>Conductance: 50.00 nS</li>
<li>Continuity beeper: Yes</li>
<li>Battery/fuse access: Yes/Yes</li>
<li>Elapsed time clock: Yes</li>
<li>Time of day clock: Yes</li>
<li>Min-max-avg: Yes</li>
<li>Duty cycle: Yes</li>
<li>Pulse width: Yes</li>
<li>Isolated optical interface: Yes</li>
<li>Auto/touch hold: Yes</li>
<li>Reading memory: Yes</li>
<li>Log to PC: Yes</li>
<li>Interval/event logging: Yes</li>
<li>Logging memory: Up to 15,000 readings</li>
<li>Wireless connectivity (optional): Yes</li>
</ul>