Iwata

RS Pro

Fasteners

fasteners

Circlips

circlips

Plumbing & Sanitary

plumbing-sanitary

Hose Clamp

hose-clamp

Washers

washers

Shim Ring, Inner Diameter 3mm X Outer Diameter 7mm, Pack of 10 (Available in Brass, Carbon Steel and 304 Stainless Steel)

Shim Rings, also known as Shim Washers, are available in various thickness to align gaps and uneven surfaces. Shim washers look similar to flat washers, but are different in their usage and purpose.

Produced in Japan, these are made to extremely precise tolerances and are free from burrs. We are able to offer shim washers in different materials such as Brass, Carbon Steel (SPCC) and 304 stainless steel.

Use them for screws, axles, bearing faces and machine bases. Depending on the material, thickness variants range from 0.01mm to 1mm. Each package contains 10 pcs of the same thickness in the above given inner diameter and outer diameter sizes.

Shim washers and flat washers are inherently different in their purpose and tolerances. Here are three differences that set shim washers apart from flat washers.

They serve a different purpose in life. While flat washers are used for fastening, load distribution and surface protection, shim washers are used for gap alignment. Flat washers are usually used together with screws, bolts or nuts. While shim washers can be used in the same way, they can be slotted into threaded screws or axles to carry out their job.

Based on DIN125A standard, flat washers are produced with nominal dimensions with no tolerance values given. Our flat washers are supplied with the understanding that the thickness variance will range from 0 to 0.2mm. For example, an M3 flat washer will have thickness ranging from 0.4mm to 0.6mm, even in the same batch!

Shim washers are produced to close tolerances, usually up to 0.2mm for ID and OD, and as small as +/-0.02mm for thickness. 

In short, shim washers are more precise than flat washers because they have to be. During gap alignment or leveling, minor differences in thickness and diameters must be taken into account for fear of misalignment. 

Flat washers usually have a single thickness based on a given ID and OD. For example, an M3 flat washer with ID 3.2mm and OD 6mm will have thickness 0.4mm. If you are lucky (or not), you might find some with 0.5mm in the same batch. Not reassuring? Not to worry, being used for fastening, the thickness of flat washers is usually not a focal point.

Product Description: Shim Ring (Also known as Shim Washer)

Manufacturer: Iwata Manufacturing Co., Ltd

Materials: Carbon Steel (SPCC), Brass and 304 Stainless Steel

<h3 class="md-block-header-three">Shim Ring, Inner Diameter 3mm X Outer Diameter 7mm, Pack of 10 (Available in Brass, Carbon Steel and 304 Stainless Steel)</h3>Shim Rings, also known as Shim Washers, are available in various thickness to align gaps and uneven surfaces. Shim washers look similar to flat washers, but are different in their usage and purpose.Produced in Japan, these are made to extremely precise tolerances and are free from burrs. We are able to offer shim washers in different materials such as Brass, Carbon Steel (SPCC) and 304 stainless steel.Use them for screws, axles, bearing faces and machine bases. Depending on the material, thickness variants range from 0.01mm to 1mm. Each package contains 10 pcs of the same thickness in the above given inner diameter and outer diameter sizes.Shim washers and flat washers are inherently different in their purpose and tolerances. Here are three differences that set shim washers apart from flat washers.Purpose And UsageThey serve a different purpose in life. While flat washers are used for fastening, load distribution and surface protection, shim washers are used for gap alignment. Flat washers are usually used together with screws, bolts or nuts. While shim washers can be used in the same way, they can be slotted into threaded screws or axles to carry out their job.TolerancesBased on DIN125A standard, flat washers are produced with nominal dimensions with no tolerance values given. Our flat washers are supplied with the understanding that the thickness variance will range from 0 to 0.2mm. For example, an M3 flat washer will have thickness ranging from 0.4mm to 0.6mm, even in the same batch!Shim washers are produced to close tolerances, usually up to 0.2mm for ID and OD, and as small as +/-0.02mm for thickness. In short, shim washers are more precise than flat washers because they have to be. During gap alignment or leveling, minor differences in thickness and diameters must be taken into account for fear of misalignment. Available ThicknessFlat washers usually have a single thickness based on a given ID and OD. For example, an M3 flat washer with ID 3.2mm and OD 6mm will have thickness 0.4mm. If you are lucky (or not), you might find some with 0.5mm in the same batch. Not reassuring? Not to worry, being used for fastening, the thickness of flat washers is usually not a focal point.Product Description: Shim Ring (Also known as Shim Washer)Manufacturer: Iwata Manufacturing Co., LtdMaterials: Carbon Steel (SPCC), Brass and 304 Stainless SteelID: 3mmOD: 6mmThickness: 0.01mm to 1mm.Quantity Per Package: 10 pcsCountry of Origin: Japan

<h3>Shim Ring, Inner Diameter 3mm X Outer Diameter 7mm, Pack of 10 (Available in Brass, Carbon Steel and 304 Stainless Steel)</h3>
Shim Rings, also known as Shim Washers, are available in various thickness to align gaps and uneven surfaces. Shim washers look similar to flat washers, but are different in their usage and purpose.
Produced in Japan, these are made to extremely precise tolerances and are free from burrs. We are able to offer shim washers in different materials such as Brass, Carbon Steel (SPCC) and 304 stainless steel.
Use them for screws, axles, bearing faces and machine bases. Depending on the material, thickness variants range from 0.01mm to 1mm. Each package contains 10 pcs of the same thickness in the above given inner diameter and outer diameter sizes.
Shim washers and flat washers are inherently different in their purpose and tolerances. Here are three differences that set shim washers apart from flat washers.
Purpose And Usage
They serve a different purpose in life. While flat washers are used for fastening, load distribution and surface protection, shim washers are used for gap alignment. Flat washers are usually used together with screws, bolts or nuts. While shim washers can be used in the same way, they can be slotted into threaded screws or axles to carry out their job.
Tolerances
Based on DIN125A standard, flat washers are produced with nominal dimensions with no tolerance values given. Our flat washers are supplied with the understanding that the thickness variance will range from 0 to 0.2mm. For example, an M3 flat washer will have thickness ranging from 0.4mm to 0.6mm, even in the same batch!
Shim washers are produced to close tolerances, usually up to 0.2mm for ID and OD, and as small as +/-0.02mm for thickness. 
In short, shim washers are more precise than flat washers because they have to be. During gap alignment or leveling, minor differences in thickness and diameters must be taken into account for fear of misalignment. 
Available Thickness
Flat washers usually have a single thickness based on a given ID and OD. For example, an M3 flat washer with ID 3.2mm and OD 6mm will have thickness 0.4mm. If you are lucky (or not), you might find some with 0.5mm in the same batch. Not reassuring? Not to worry, being used for fastening, the thickness of flat washers is usually not a focal point.
Product Description: Shim Ring (Also known as Shim Washer)
Manufacturer: Iwata Manufacturing Co., Ltd
Materials: Carbon Steel (SPCC), Brass and 304 Stainless Steel
ID: 3mm
OD: 6mm
Thickness: 0.01mm to 1mm.
Quantity Per Package: 10 pcs
Country of Origin: Japan

Precision Brand

Ergomat

Southco

Others

DYMON

SCRUBS

IT Accessories

Machinery Accessories

Screw

Ball Bearings

Painting Tools

Hooks & Eyes

Drill Bits & Drill Bit Sets

Rubber Seals

Other Tools

Leland

buyerIntroduction

Iwata Shim Ring, Inner Diameter 3mm X Outer Diameter 7mm, Pack of 10

iwata shim ring, inner diameter 3mm outer 7mm, pack 10 cincin iwata, dalam luar kemasan buah washers pek iwata/岩田 垫片环，内径 外径 7mm，10 个一包 岩田

iwata-shim-ring-inner-diameter-3mm-x-outer-diameter-7mm-pack-of-10

Carbon Steel ID 3mm x OD 7mm x 0.10mm PN RF003007010, Pack of 10 Pieces

Carbon Steel ID 3mm x OD 7mm x 0.15mm PN RF003007015, Pack of 10 Pieces

Carbon Steel ID 3mm x OD 7mm x 0.20mm PN RF003007020, Pack of 10 Pieces

Carbon Steel ID 3mm x OD 7mm x 0.30mm PN RF003007030, Pack of 10 Pieces

Carbon Steel ID 3mm x OD 7mm x 0.50mm PN RF003007050, Pack of 10 Pieces

Carbon Steel ID 3mm x OD 7mm x 1mm PN RF003007100, Pack of 10 Pieces

Brass ID 3mm x OD 7mm x 0.05mm PN RB003007005, Pack of 10 Pieces

Brass ID 3mm x OD 7mm x 0.10mm PN RB003007010, Pack of 10 Pieces

Brass ID 3mm x OD 7mm x 0.15mm PN RB003007015, Pack of 10 Pieces

Brass ID 3mm x OD 7mm x 0.20mm PN RB003007020, Pack of 10 Pieces

Brass ID 3mm x OD 7mm x 0.30mm PN RB003007030, Pack of 10 Pieces

Brass ID 3mm x OD 7mm x 0.50mm PN RB003007050, Pack of 10 Pieces

Brass ID 3mm x OD 7mm x 1mm PN RB003007100, Pack of 10 Pieces

304 SST ID 3mm x OD 7mm x 0.01mm PN RS003007001, Pack of 10 Pieces

304 SST ID 3mm x OD 7mm x 0.02mm PN RS003007002, Pack of 10 Pieces

304 SST ID 3mm x OD 7mm x 0.03mm PN RS003007003, Pack of 10 Pieces

304 SST ID 3mm x OD 7mm x 0.05mm PN RS003007005, Pack of 10 Pieces

304 SST ID 3mm x OD 7mm x 0.10mm PN RS003007010, Pack of 10 Pieces

304 SST ID 3mm x OD 7mm x 0.15mm PN RS003007015, Pack of 10 Pieces

304 SST ID 3mm x OD 7mm x 0.20mm PN RS003007020, Pack of 10 Pieces

304 SST ID 3mm x OD 7mm x 0.30mm PN RS003007030, Pack of 10 Pieces

304 SST ID 3mm x OD 7mm x 0.50mm PN RS003007050, Pack of 10 Pieces

304 SST ID 3mm x OD 7mm x 1mm PN RS003007100, Pack of 10 Pieces

Material

Shim Ring, Inner Diameter 5mm X Outer Diameter 7mm, Pack of 10 (Available in Brass, Carbon Steel and 304 Stainless Steel)

<h3 class="md-block-header-three">Shim Ring, Inner Diameter 5mm X Outer Diameter 7mm, Pack of 10 (Available in Brass, Carbon Steel and 304 Stainless Steel)</h3>Shim Rings, also known as Shim Washers, are available in various thickness to align gaps and uneven surfaces. Shim washers look similar to flat washers, but are different in their usage and purpose.Produced in Japan, these are made to extremely precise tolerances and are free from burrs. We are able to offer shim washers in different materials such as Brass, Carbon Steel (SPCC) and 304 stainless steel.Use them for screws, axles, bearing faces and machine bases. Depending on the material, thickness variants range from 0.01mm to 1mm. Each package contains 10 pcs of the same thickness in the above given inner diameter and outer diameter sizes.Shim washers and flat washers are inherently different in their purpose and tolerances. Here are three differences that set shim washers apart from flat washers.Purpose And UsageThey serve a different purpose in life. While flat washers are used for fastening, load distribution and surface protection, shim washers are used for gap alignment. Flat washers are usually used together with screws, bolts or nuts. While shim washers can be used in the same way, they can be slotted into threaded screws or axles to carry out their job.TolerancesBased on DIN125A standard, flat washers are produced with nominal dimensions with no tolerance values given. Our flat washers are supplied with the understanding that the thickness variance will range from 0 to 0.2mm. For example, an M3 flat washer will have thickness ranging from 0.4mm to 0.6mm, even in the same batch!Shim washers are produced to close tolerances, usually up to 0.2mm for ID and OD, and as small as +/-0.02mm for thickness. In short, shim washers are more precise than flat washers because they have to be. During gap alignment or leveling, minor differences in thickness and diameters must be taken into account for fear of misalignment. Available ThicknessFlat washers usually have a single thickness based on a given ID and OD. For example, an M3 flat washer with ID 3.2mm and OD 6mm will have thickness 0.4mm. If you are lucky (or not), you might find some with 0.5mm in the same batch. Not reassuring? Not to worry, being used for fastening, the thickness of flat washers is usually not a focal point.Product Description: Shim Ring (Also known as Shim Washer)Manufacturer: Iwata Manufacturing Co., LtdMaterials: Carbon Steel (SPCC), Brass and 304 Stainless SteelID: 5mmOD: 7mmThickness: 0.01mm to 1mm.Quantity Per Package: 10 pcsCountry of Origin: Japan

<h3>Shim Ring, Inner Diameter 5mm X Outer Diameter 7mm, Pack of 10 (Available in Brass, Carbon Steel and 304 Stainless Steel)</h3>
Shim Rings, also known as Shim Washers, are available in various thickness to align gaps and uneven surfaces. Shim washers look similar to flat washers, but are different in their usage and purpose.
Produced in Japan, these are made to extremely precise tolerances and are free from burrs. We are able to offer shim washers in different materials such as Brass, Carbon Steel (SPCC) and 304 stainless steel.
Use them for screws, axles, bearing faces and machine bases. Depending on the material, thickness variants range from 0.01mm to 1mm. Each package contains 10 pcs of the same thickness in the above given inner diameter and outer diameter sizes.
Shim washers and flat washers are inherently different in their purpose and tolerances. Here are three differences that set shim washers apart from flat washers.
Purpose And Usage
They serve a different purpose in life. While flat washers are used for fastening, load distribution and surface protection, shim washers are used for gap alignment. Flat washers are usually used together with screws, bolts or nuts. While shim washers can be used in the same way, they can be slotted into threaded screws or axles to carry out their job.
Tolerances
Based on DIN125A standard, flat washers are produced with nominal dimensions with no tolerance values given. Our flat washers are supplied with the understanding that the thickness variance will range from 0 to 0.2mm. For example, an M3 flat washer will have thickness ranging from 0.4mm to 0.6mm, even in the same batch!
Shim washers are produced to close tolerances, usually up to 0.2mm for ID and OD, and as small as +/-0.02mm for thickness. 
In short, shim washers are more precise than flat washers because they have to be. During gap alignment or leveling, minor differences in thickness and diameters must be taken into account for fear of misalignment. 
Available Thickness
Flat washers usually have a single thickness based on a given ID and OD. For example, an M3 flat washer with ID 3.2mm and OD 6mm will have thickness 0.4mm. If you are lucky (or not), you might find some with 0.5mm in the same batch. Not reassuring? Not to worry, being used for fastening, the thickness of flat washers is usually not a focal point.
Product Description: Shim Ring (Also known as Shim Washer)
Manufacturer: Iwata Manufacturing Co., Ltd
Materials: Carbon Steel (SPCC), Brass and 304 Stainless Steel
ID: 5mm
OD: 7mm
Thickness: 0.01mm to 1mm.
Quantity Per Package: 10 pcs
Country of Origin: Japan

Iwata Shim Ring, Inner Diameter 5mm X Outer Diameter 7mm, Pack of 10

iwata shim ring, inner diameter 5mm outer 7mm, pack 10 cincin iwata, dalam luar kemasan buah washers pek iwata/岩田 垫片环，内径 外径 7mm，10 个一包 岩田

iwata-shim-ring-inner-diameter-5mm-x-outer-diameter-7mm-pack-of-10

Carbon Steel ID 5mm x OD 7mm x 0.10mm PN RF005007010, Pack of 10 Pieces

Carbon Steel ID 5mm x OD 7mm x 0.15mm PN RF005007015, Pack of 10 Pieces

Carbon Steel ID 5mm x OD 7mm x 0.20mm PN RF005007020, Pack of 10 Pieces

Carbon Steel ID 5mm x OD 7mm x 0.30mm PN RF005007030, Pack of 10 Pieces

Carbon Steel ID 5mm x OD 7mm x 0.50mm PN RF005007050, Pack of 10 Pieces

Carbon Steel ID 5mm x OD 7mm x 1mm PN RF005007100, Pack of 10 Pieces

Brass ID 5mm x OD 7mm x 0.05mm PN RB005007005, Pack of 10 Pieces

Brass ID 5mm x OD 7mm x 0.10mm PN RB005007010, Pack of 10 Pieces

Brass ID 5mm x OD 7mm x 0.15mm PN RB005007015, Pack of 10 Pieces

Brass ID 5mm x OD 7mm x 0.20mm PN RB005007020, Pack of 10 Pieces

Brass ID 5mm x OD 7mm x 0.30mm PN RB005007030, Pack of 10 Pieces

Brass ID 5mm x OD 7mm x 0.50mm PN RB005007050, Pack of 10 Pieces

Brass ID 5mm x OD 7mm x 1mm PN RB005007100, Pack of 10 Pieces

304 SST ID 5mm x OD 7mm x 0.01mm PN RS005007001, Pack of 10 Pieces

304 SST ID 5mm x OD 7mm x 0.02mm PN RS005007002, Pack of 10 Pieces

304 SST ID 5mm x OD 7mm x 0.03mm PN RS005007003, Pack of 10 Pieces

304 SST ID 5mm x OD 7mm x 0.05mm PN RS005007005, Pack of 10 Pieces

304 SST ID 5mm x OD 7mm x 0.10mm PN RS005007010, Pack of 10 Pieces

304 SST ID 5mm x OD 7mm x 0.15mm PN RS005007015, Pack of 10 Pieces

304 SST ID 5mm x OD 7mm x 0.20mm PN RS005007020, Pack of 10 Pieces

304 SST ID 5mm x OD 7mm x 0.30mm PN RS005007030, Pack of 10 Pieces

304 SST ID 5mm x OD 7mm x 0.50mm PN RS005007050, Pack of 10 Pieces

304 SST ID 5mm x OD 7mm x 1mm PN RS005007100, Pack of 10 Pieces

Shim Ring, Inner Diameter 4mm X Outer Diameter 7mm, Pack of 10 (Available in Brass, Carbon Steel and 304 Stainless Steel)

<h3 class="md-block-header-three">Shim Ring, Inner Diameter 4mm X Outer Diameter 7mm, Pack of 10 (Available in Brass, Carbon Steel and 304 Stainless Steel)</h3>Shim Rings, also known as Shim Washers, are available in various thickness to align gaps and uneven surfaces. Shim washers look similar to flat washers, but are different in their usage and purpose.Produced in Japan, these are made to extremely precise tolerances and are free from burrs. We are able to offer shim washers in different materials such as Brass, Carbon Steel (SPCC) and 304 stainless steel.Use them for screws, axles, bearing faces and machine bases. Depending on the material, thickness variants range from 0.01mm to 1mm. Each package contains 10 pcs of the same thickness in the above given inner diameter and outer diameter sizes.Shim washers and flat washers are inherently different in their purpose and tolerances. Here are three differences that set shim washers apart from flat washers.Purpose And UsageThey serve a different purpose in life. While flat washers are used for fastening, load distribution and surface protection, shim washers are used for gap alignment. Flat washers are usually used together with screws, bolts or nuts. While shim washers can be used in the same way, they can be slotted into threaded screws or axles to carry out their job.TolerancesBased on DIN125A standard, flat washers are produced with nominal dimensions with no tolerance values given. Our flat washers are supplied with the understanding that the thickness variance will range from 0 to 0.2mm. For example, an M3 flat washer will have thickness ranging from 0.4mm to 0.6mm, even in the same batch!Shim washers are produced to close tolerances, usually up to 0.2mm for ID and OD, and as small as +/-0.02mm for thickness. In short, shim washers are more precise than flat washers because they have to be. During gap alignment or leveling, minor differences in thickness and diameters must be taken into account for fear of misalignment. Available ThicknessFlat washers usually have a single thickness based on a given ID and OD. For example, an M3 flat washer with ID 3.2mm and OD 6mm will have thickness 0.4mm. If you are lucky (or not), you might find some with 0.5mm in the same batch. Not reassuring? Not to worry, being used for fastening, the thickness of flat washers is usually not a focal point.Product Description: Shim Ring (Also known as Shim Washer)Manufacturer: Iwata Manufacturing Co., LtdMaterials: Carbon Steel (SPCC), Brass and 304 Stainless SteelID: 4mmOD: 7mmThickness: 0.01mm to 1mm.Quantity Per Package: 10 pcsCountry of Origin: Japan

<h3>Shim Ring, Inner Diameter 4mm X Outer Diameter 7mm, Pack of 10 (Available in Brass, Carbon Steel and 304 Stainless Steel)</h3>
Shim Rings, also known as Shim Washers, are available in various thickness to align gaps and uneven surfaces. Shim washers look similar to flat washers, but are different in their usage and purpose.
Produced in Japan, these are made to extremely precise tolerances and are free from burrs. We are able to offer shim washers in different materials such as Brass, Carbon Steel (SPCC) and 304 stainless steel.
Use them for screws, axles, bearing faces and machine bases. Depending on the material, thickness variants range from 0.01mm to 1mm. Each package contains 10 pcs of the same thickness in the above given inner diameter and outer diameter sizes.
Shim washers and flat washers are inherently different in their purpose and tolerances. Here are three differences that set shim washers apart from flat washers.
Purpose And Usage
They serve a different purpose in life. While flat washers are used for fastening, load distribution and surface protection, shim washers are used for gap alignment. Flat washers are usually used together with screws, bolts or nuts. While shim washers can be used in the same way, they can be slotted into threaded screws or axles to carry out their job.
Tolerances
Based on DIN125A standard, flat washers are produced with nominal dimensions with no tolerance values given. Our flat washers are supplied with the understanding that the thickness variance will range from 0 to 0.2mm. For example, an M3 flat washer will have thickness ranging from 0.4mm to 0.6mm, even in the same batch!
Shim washers are produced to close tolerances, usually up to 0.2mm for ID and OD, and as small as +/-0.02mm for thickness. 
In short, shim washers are more precise than flat washers because they have to be. During gap alignment or leveling, minor differences in thickness and diameters must be taken into account for fear of misalignment. 
Available Thickness
Flat washers usually have a single thickness based on a given ID and OD. For example, an M3 flat washer with ID 3.2mm and OD 6mm will have thickness 0.4mm. If you are lucky (or not), you might find some with 0.5mm in the same batch. Not reassuring? Not to worry, being used for fastening, the thickness of flat washers is usually not a focal point.
Product Description: Shim Ring (Also known as Shim Washer)
Manufacturer: Iwata Manufacturing Co., Ltd
Materials: Carbon Steel (SPCC), Brass and 304 Stainless Steel
ID: 4mm
OD: 7mm
Thickness: 0.01mm to 1mm.
Quantity Per Package: 10 pcs
Country of Origin: Japan

Iwata Shim Ring, Inner Diameter 4mm X Outer Diameter 7mm, Pack of 10

iwata shim ring, inner diameter 4mm outer 7mm, pack 10 cincin iwata, dalam luar kemasan washers pek iwata/岩田 垫片环，内径 外径 7mm，10 个一包 岩田

iwata-shim-ring-inner-diameter-4mm-x-outer-diameter-7mm-pack-of-10

Carbon Steel ID 4mm x OD 7mm x 0.10mm PN RF004007010, Pack of 10 Pieces

Carbon Steel ID 4mm x OD 7mm x 0.15mm PN RF004007015, Pack of 10 Pieces

Carbon Steel ID 4mm x OD 7mm x 0.20mm PN RF004007020, Pack of 10 Pieces

Carbon Steel ID 4mm x OD 7mm x 0.30mm PN RF004007030, Pack of 10 Pieces

Carbon Steel ID 4mm x OD 7mm x 0.50mm PN RF004007050, Pack of 10 Pieces

Carbon Steel ID 4mm x OD 7mm x 1mm PN RF004007100, Pack of 10 Pieces

Brass ID 4mm x OD 7mm x 0.05mm PN RB004007005, Pack of 10 Pieces

Brass ID 4mm x OD 7mm x 0.10mm PN RB004007010, Pack of 10 Pieces

Brass ID 4mm x OD 7mm x 0.15mm PN RB004007015, Pack of 10 Pieces

Brass ID 4mm x OD 7mm x 0.20mm PN RB004007020, Pack of 10 Pieces

Brass ID 4mm x OD 7mm x 0.30mm PN RB004007030, Pack of 10 Pieces

Brass ID 4mm x OD 7mm x 0.50mm PN RB004007050, Pack of 10 Pieces

Brass ID 4mm x OD 7mm x 1mm PN RB004007100, Pack of 10 Pieces

304 SST ID 4mm x OD 7mm x 0.01mm PN RS004007001, Pack of 10 Pieces

304 SST ID 4mm x OD 7mm x 0.02mm PN RS004007002, Pack of 10 Pieces

304 SST ID 4mm x OD 7mm x 0.03mm PN RS004007003, Pack of 10 Pieces

304 SST ID 4mm x OD 7mm x 0.05mm PN RS004007005, Pack of 10 Pieces

304 SST ID 4mm x OD 7mm x 0.10mm PN RS004007010, Pack of 10 Pieces

304 SST ID 4mm x OD 7mm x 0.15mm PN RS004007015, Pack of 10 Pieces

304 SST ID 4mm x OD 7mm x 0.20mm PN RS004007020, Pack of 10 Pieces

304 SST ID 4mm x OD 7mm x 0.30mm PN RS004007030, Pack of 10 Pieces

304 SST ID 4mm x OD 7mm x 0.50mm PN RS004007050, Pack of 10 Pieces

304 SST ID 4mm x OD 7mm x 1mm PN RS004007100, Pack of 10 Pieces

Datasheet

Siemens

STANLEY

DEUTSCH

Facom

RAPID

SCHNEIDER ELECTRIC

ECLIPSE TOOLS

O Ring

Plugs & Connector 

Surface Mount Resistors

Bolts

Panel Mount Indicators 

Button Switch

Electrical Wire 

Junction & Enclosure Box

Aluminium Capacitors

RS Components ETH SG

Rs Pro 200 Piece Zinc Plated Steel O Clip Hose Clip Kit, 5 ? 7mm and 23 ? 27mm Inside Diameter

rs pro 200 piece zinc plated steel clip hose kit, 7mm 23 27mm inside diameter sepotong baja berlapis seng klip kit selang, dan 23? dalam clamp klem selang keping hos keluli bersalut zink klip, pengapit 件镀锌钢 形夹软管夹套件，5 个？ 毫米和 23？ 27mm内径 rs专业版

rs-pro-200-piece-zinc-plated-steel-o-clip-hose-clip-kit-5-7mm-and-23-27mm-inside-diameter

RS Pro Datasheet

Fasteners Selection Guide 56 Pages

GT LINE TOOL CASE

Rs Pro 0289499 Steel E Type Circlip, 7mm Shaft Diameter (1 Bag of 50)

rs pro 0289499 steel type circlip, 7mm shaft diameter (1 bag 50) poros kantong isi circlips pekeliling jenis keluli e, aci beg 型弹性挡圈，7mm 轴直径（1 50 个） rs专业版

rs-pro-0289499-steel-e-type-circlip-7mm-shaft-diameter-1-bag-of-50

RS PRO Datasheet

Rs Pro 2096873 Stainless Steel E Type Circlip, 7mm Shaft Diameter (1 Bag of 50)

rs pro 2096873 stainless steel type circlip, 7mm shaft diameter (1 bag 50) poros kantong isi circlips keluli tahan karat jenis aci beg 不锈钢 型弹性挡圈，7 毫米轴直径（1 50 个） rs专业版