Iwata

RS Pro

Mechanical Parts

mechanical-parts

Ball Bearings

ball-bearings

O Ring

o-ring

Fasteners

fasteners

Washers

washers

Shim Ring, Inner Diameter 15mm X Outer Diameter 18mm, Pack of 10 (Available in Brass, Carbon Steel and 304 Stainless Steel)

Shim Rings, also known as Shim Washers, are available in various thickness to align gaps and uneven surfaces. Shim washers look similar to flat washers, but are different in their usage and purpose.

Produced in Japan, these are made to extremely precise tolerances and are free from burrs. We are able to offer shim washers in different materials such as Brass, Carbon Steel (SPCC) and 304 stainless steel.

Use them for screws, axles, bearing faces and machine bases. Depending on the material, thickness variants range from 0.01mm to 1mm. Each package contains 10 pcs of the same thickness in the above given inner diameter and outer diameter sizes.

Shim washers and flat washers are inherently different in their purpose and tolerances. Here are three differences that set shim washers apart from flat washers.

They serve a different purpose in life. While flat washers are used for fastening, load distribution and surface protection, shim washers are used for gap alignment. Flat washers are usually used together with screws, bolts or nuts. While shim washers can be used in the same way, they can be slotted into threaded screws or axles to carry out their job.

Based on DIN125A standard, flat washers are produced with nominal dimensions with no tolerance values given. Our flat washers are supplied with the understanding that the thickness variance will range from 0 to 0.2mm. For example, an M3 flat washer will have thickness ranging from 0.4mm to 0.6mm, even in the same batch!

Shim washers are produced to close tolerances, usually up to 0.2mm for ID and OD, and as small as +/-0.02mm for thickness. 

In short, shim washers are more precise than flat washers because they have to be. During gap alignment or leveling, minor differences in thickness and diameters must be taken into account for fear of misalignment. 

Flat washers usually have a single thickness based on a given ID and OD. For example, an M3 flat washer with ID 3.2mm and OD 6mm will have thickness 0.4mm. If you are lucky (or not), you might find some with 0.5mm in the same batch. Not reassuring? Not to worry, being used for fastening, the thickness of flat washers is usually not a focal point.

Product Description: Shim Ring (Also known as Shim Washer)

Manufacturer: Iwata Manufacturing Co., Ltd

Materials: Carbon Steel (SPCC), Brass and 304 Stainless Steel

<h3 class="md-block-header-three"><strong class="md-inline-bold">Shim Ring, Inner Diameter 15mm X Outer Diameter 18mm, Pack of 10 (Available in Brass, Carbon Steel and 304 Stainless Steel)</strong></h3><p class="md-block-unstyled"><strong class="md-inline-bold">Shim Rings, also known as Shim Washers, are available in various thickness to align gaps and uneven surfaces. Shim washers look similar to flat washers, but are different in their usage and purpose.</strong></p><p class="md-block-unstyled"><strong class="md-inline-bold">Produced in Japan, these are made to extremely precise tolerances and are free from burrs. We are able to offer shim washers in different materials such as Brass, Carbon Steel (SPCC) and 304 stainless steel.</strong></p><p class="md-block-unstyled"><strong class="md-inline-bold">Use them for screws, axles, bearing faces and machine bases. Depending on the material, thickness variants range from 0.01mm to 1mm. Each package contains 10 pcs of the same thickness in the above given inner diameter and outer diameter sizes.</strong></p><p class="md-block-unstyled">Shim washers and flat washers are inherently different in their purpose and tolerances. Here are three differences that set shim washers apart from flat washers.</p><p class="md-block-unstyled">Purpose And Usage</p><p class="md-block-unstyled">They serve a different purpose in life. While flat washers are used for fastening, load distribution and surface protection, shim washers are used for gap alignment. Flat washers are usually used together with screws, bolts or nuts. While shim washers can be used in the same way, they can be slotted into threaded screws or axles to carry out their job.</p><p class="md-block-unstyled">Tolerances</p><p class="md-block-unstyled">Based on DIN125A standard, flat washers are produced with nominal dimensions with no tolerance values given. Our flat washers are supplied with the understanding that the thickness variance will range from 0 to 0.2mm. For example, an M3 flat washer will have thickness ranging from 0.4mm to 0.6mm, even in the same batch!</p><p class="md-block-unstyled">Shim washers are produced to close tolerances, usually up to 0.2mm for ID and OD, and as small as +/-0.02mm for thickness. </p><p class="md-block-unstyled">In short, shim washers are more precise than flat washers because they have to be. During gap alignment or leveling, minor differences in thickness and diameters must be taken into account for fear of misalignment. </p><p class="md-block-unstyled">Available Thickness</p><p class="md-block-unstyled">Flat washers usually have a single thickness based on a given ID and OD. For example, an M3 flat washer with ID 3.2mm and OD 6mm will have thickness 0.4mm. If you are lucky (or not), you might find some with 0.5mm in the same batch. Not reassuring? Not to worry, being used for fastening, the thickness of flat washers is usually not a focal point.</p><p class="md-block-unstyled">Product Description: Shim Ring (Also known as Shim Washer)</p><p class="md-block-unstyled">Manufacturer: Iwata Manufacturing Co., Ltd</p><p class="md-block-unstyled">Materials: Carbon Steel (SPCC), Brass and 304 Stainless Steel</p><p class="md-block-unstyled">ID: 15mm</p><p class="md-block-unstyled">OD: 18mm</p><p class="md-block-unstyled">Thickness: 0.01mm to 1mm.</p><p class="md-block-unstyled">Quantity Per Package: 10 pcs</p><p class="md-block-unstyled">Country of Origin: Japan</p>

<h3><strong>Shim Ring, Inner Diameter 15mm X Outer Diameter 18mm, Pack of 10 (Available in Brass, Carbon Steel and 304 Stainless Steel)</strong></h3>
<p><strong>Shim Rings, also known as Shim Washers, are available in various thickness to align gaps and uneven surfaces. Shim washers look similar to flat washers, but are different in their usage and purpose.</strong></p>
<p><strong>Produced in Japan, these are made to extremely precise tolerances and are free from burrs. We are able to offer shim washers in different materials such as Brass, Carbon Steel (SPCC) and 304 stainless steel.</strong></p>
<p><strong>Use them for screws, axles, bearing faces and machine bases. Depending on the material, thickness variants range from 0.01mm to 1mm. Each package contains 10 pcs of the same thickness in the above given inner diameter and outer diameter sizes.</strong></p>
<p>Shim washers and flat washers are inherently different in their purpose and tolerances. Here are three differences that set shim washers apart from flat washers.</p>
<p>Purpose And Usage</p>
<p>They serve a different purpose in life. While flat washers are used for fastening, load distribution and surface protection, shim washers are used for gap alignment. Flat washers are usually used together with screws, bolts or nuts. While shim washers can be used in the same way, they can be slotted into threaded screws or axles to carry out their job.</p>
<p>Tolerances</p>
<p>Based on DIN125A standard, flat washers are produced with nominal dimensions with no tolerance values given. Our flat washers are supplied with the understanding that the thickness variance will range from 0 to 0.2mm. For example, an M3 flat washer will have thickness ranging from 0.4mm to 0.6mm, even in the same batch!</p>
<p>Shim washers are produced to close tolerances, usually up to 0.2mm for ID and OD, and as small as +/-0.02mm for thickness. </p>
<p>In short, shim washers are more precise than flat washers because they have to be. During gap alignment or leveling, minor differences in thickness and diameters must be taken into account for fear of misalignment. </p>
<p>Available Thickness</p>
<p>Flat washers usually have a single thickness based on a given ID and OD. For example, an M3 flat washer with ID 3.2mm and OD 6mm will have thickness 0.4mm. If you are lucky (or not), you might find some with 0.5mm in the same batch. Not reassuring? Not to worry, being used for fastening, the thickness of flat washers is usually not a focal point.</p>
<p>Product Description: Shim Ring (Also known as Shim Washer)</p>
<p>Manufacturer: Iwata Manufacturing Co., Ltd</p>
<p>Materials: Carbon Steel (SPCC), Brass and 304 Stainless Steel</p>
<p>ID: 15mm</p>
<p>OD: 18mm</p>
<p>Thickness: 0.01mm to 1mm.</p>
<p>Quantity Per Package: 10 pcs</p>
<p>Country of Origin: Japan</p>


Precision Brand

Ergomat

Southco

Others

DYMON

SCRUBS

IT Accessories

Machinery Accessories

Screw

Painting Tools

Hooks & Eyes

Drill Bits & Drill Bit Sets

Rubber Seals

Other Tools

Hose Clamp

Leland

buyerIntroduction

Iwata Shim Ring, Inner Diameter 15mm X Outer Diameter 18mm, Pack of 10

iwata shim ring, inner diameter 15mm outer 18mm, pack 10 cincin iwata, dalam luar kemasan buah washers pek iwata/岩田 垫片环，内径 15 毫米 外径 18 毫米，10 个一包 岩田

iwata-shim-ring-inner-diameter-15mm-x-outer-diameter-18mm-pack-of-10

Carbon Steel ID 15mm x OD 18mm x 0.10mm PN RF015018010, Pack of 10 Pieces

Carbon Steel ID 15mm x OD 18mm x 0.15mm PN RF015018015, Pack of 10 Pieces

Carbon Steel ID 15mm x OD 18mm x 0.20mm PN RF015018020, Pack of 10 Pieces

Carbon Steel ID 15mm x OD 18mm x 0.30mm PN RF015018030, Pack of 10 Pieces

Carbon Steel ID 15mm x OD 18mm x 0.50mm PN RF015018050, Pack of 10 Pieces

Carbon Steel ID 15mm x OD 18mm x 1mm PN RF015018100, Pack of 10 Pieces

Brass ID 15mm x OD 18mm x 0.05mm PN RB015018005, Pack of 10 Pieces

Brass ID 15mm x OD 18mm x 0.10mm PN RB015018010, Pack of 10 Pieces

Brass ID 15mm x OD 18mm x 0.15mm PN RB015018015, Pack of 10 Pieces

Brass ID 15mm x OD 18mm x 0.20mm PN RB015018020, Pack of 10 Pieces

Brass ID 15mm x OD 18mm x 0.30mm PN RB015018030, Pack of 10 Pieces

Brass ID 15mm x OD 18mm x 0.50mm PN RB0015018050, Pack of 10 Pieces

Brass ID 15mm x OD 18mm x 1mm PN RB015018100, Pack of 10 Pieces

304 SST ID 15mm x OD 18mm x 0.01mm PN RS015018001, Pack of 10 Pieces

304 SST ID 15mm x OD 18mm x 0.02mm PN RS015018002, Pack of 10 Pieces

304 SST ID 15mm x OD 18mm x 0.03mm PN RS015018003, Pack of 10 Pieces

304 SST ID 15mm x OD 18mm x 0.05mm PN RS015018005, Pack of 10 Pieces

304 SST ID 15mm x OD 18mm x 0.10mm PN RS015018010, Pack of 10 Pieces

304 SST ID 15mm x OD 18mm x 0.15mm PN RS015018015, Pack of 10 Pieces

304 SST ID 15mm x OD 18mm x 0.20mm PN RS015018020, Pack of 10 Pieces

304 SST ID 15mm x OD 18mm x 0.30mm PN RS015018030, Pack of 10 Pieces

304 SST ID 15mm x OD 18mm x 0.50mm PN RS015018050, Pack of 10 Pieces

304 SST ID 15mm x OD 18mm x 1mm PN RS015018100, Pack of 10 Pieces

Material

Entered into force of the strong standard slit collar

Fastening force for clamping in-plane is strong, difficult to type is scratch the shaft

Use in a fixed, such as a sprocket or gear

Holes or screw holes Engineering is also possible

Hex Socket Head Cap Screw (SUSXM7) - 1 Piece

<h3 class="md-block-header-three">Features:</h3><ul class="md-block-unordered-list-item"><li>Entered into force of the strong standard slit collar</li><li>Fastening force for clamping in-plane is strong, difficult to type is scratch the shaft</li><li>Use in a fixed, such as a sprocket or gear</li><li>Holes or screw holes Engineering is also possible</li><li>Material is stainless steel</li></ul><h3 class="md-block-header-three">Specification:</h3><ul class="md-block-unordered-list-item"><li>Brand: Iwata</li><li>Product Type: Slit Collar</li><li>Material: Stainless Steel SUS304</li><li>Inner Diameter (φB): 18 mm</li><li>Width (L): 15 mm</li><li>Outer Diameter (φD): 45 mm</li><li>W: 1.5 mm</li><li>X: 15 mm</li><li>Y: 8 mm</li><li>A: 15 mm</li><li>Tightening Screw (M): M6x20</li></ul><h3 class="md-block-header-three">Accessories:</h3><ul class="md-block-unordered-list-item"><li>Hex Socket Head Cap Screw (SUSXM7) - 1 Piece</li></ul>

<h3>Features:</h3>
<ul>
<li>Entered into force of the strong standard slit collar</li>
<li>Fastening force for clamping in-plane is strong, difficult to type is scratch the shaft</li>
<li>Use in a fixed, such as a sprocket or gear</li>
<li>Holes or screw holes Engineering is also possible</li>
<li>Material is stainless steel</li>
</ul>
<h3>Specification:</h3>
<ul>
<li>Brand: Iwata</li>
<li>Product Type: Slit Collar</li>
<li>Material: Stainless Steel SUS304</li>
<li>Inner Diameter (φB): 18 mm</li>
<li>Width (L): 15 mm</li>
<li>Outer Diameter (φD): 45 mm</li>
<li>W: 1.5 mm</li>
<li>X: 15 mm</li>
<li>Y: 8 mm</li>
<li>A: 15 mm</li>
<li>Tightening Screw (M): M6x20</li>
</ul>
<h3>Accessories:</h3>
<ul>
<li>Hex Socket Head Cap Screw (SUSXM7) - 1 Piece</li>
</ul>


Leland Tan

Iwata Stainless Steel Standard Slit Collar 18mm X 15mm SCS1815S

iwata stainless steel standard slit collar 18mm x 15mm scs1815s standar celah kerah ball bearings bearing bebola iwata/岩田 县不锈钢标准领18mm 球轴承 岩田

iwata-stainless-steel-standard-slit-collar-18mm-x-15mm-scs1815s

RS PRO Datasheet

RS PRO O-Rings Overview

PHOENIX CONTACT

Mag-Lite

Facom

Wago

Kimberly Clark

HEICO

Plugs & Connector 

Panel Mount Indicators 

Clamps

Indicator Lights

Ethernet Cable

Bolts

Electrical Wire 

Fuses & Fusegear

RS Components ETH SG

Rs Pro 1965666 Fkm O-Ring, 15mm Bore, 18mm Outer Diameter (1 Bag of 25)

rs pro 1965666 fkm o-ring, 15mm bore, 18mm outer diameter (1 bag 25) lubang 15mm, luar kantong isi ring o-ring bor beg gelang 型圈，15 毫米内径，18 毫米外径（1 25 个） o型圈 rs专业版

rs-pro-1965666-fkm-o-ring-15mm-bore-18mm-outer-diameter-1-bag-of-25

Detachable Strong tightening force for tightening in-plane, it is hard to type scratch the shaft

Sprocket or you can use a fixed, such as a gear

Holes or screw holes Correspondence is also possible

Hex Socket Head Cap Screw (SUSXM7) - 2 Piece

<h3 class="md-block-header-three">Features:</h3><ul class="md-block-unordered-list-item"><li>Easy to standard separate Collar</li><li>Detachable Strong tightening force for tightening in-plane, it is hard to type scratch the shaft</li><li>Sprocket or you can use a fixed, such as a gear</li><li>Holes or screw holes Correspondence is also possible</li><li>Material is stainless steel</li></ul><h3 class="md-block-header-three">Specification:</h3><ul class="md-block-unordered-list-item"><li>Brand: Iwata</li><li>Product Type: Separate Collar</li><li>Material: Stainless Steel SUS304</li><li>Inner Diameter (φB): 18 mm</li><li>Width (L): 15 mm</li><li>Outer Diameter (φD): 45 mm</li><li>W: 1.5 mm</li><li>X: 15 mm</li><li>Y: 8 mm</li><li>Tightening Screw (M): M6x20</li></ul><h3 class="md-block-header-three">Accessories:</h3><ul class="md-block-unordered-list-item"><li>Hex Socket Head Cap Screw (SUSXM7) - 2 Piece</li></ul>

<h3>Features:</h3>
<ul>
<li>Easy to standard separate Collar</li>
<li>Detachable Strong tightening force for tightening in-plane, it is hard to type scratch the shaft</li>
<li>Sprocket or you can use a fixed, such as a gear</li>
<li>Holes or screw holes Correspondence is also possible</li>
<li>Material is stainless steel</li>
</ul>
<h3>Specification:</h3>
<ul>
<li>Brand: Iwata</li>
<li>Product Type: Separate Collar</li>
<li>Material: Stainless Steel SUS304</li>
<li>Inner Diameter (φB): 18 mm</li>
<li>Width (L): 15 mm</li>
<li>Outer Diameter (φD): 45 mm</li>
<li>W: 1.5 mm</li>
<li>X: 15 mm</li>
<li>Y: 8 mm</li>
<li>Tightening Screw (M): M6x20</li>
</ul>
<h3>Accessories:</h3>
<ul>
<li>Hex Socket Head Cap Screw (SUSXM7) - 2 Piece</li>
</ul>


Iwata Stainless Steel Standard Separate Collar 18mm X 15mm SCSS1815S

iwata stainless steel standard separate collar 18mm x 15mm scss1815s ball bearings bearing terpisah bebola iwata/岩田 县不锈钢制标准立领18mm 球轴承 岩田

iwata-stainless-steel-standard-separate-collar-18mm-x-15mm-scss1815s

Rs Pro 1965484 Nitrile Rubber O-Ring, 15mm Bore, 18mm Outer Diameter (1 Bag of 50)

rs pro 1965484 nitrile rubber o-ring, 15mm bore, 18mm outer diameter (1 bag 50) o-ring karet nitril, lubang 15mm, luar kantong isi ring cincin getah bor beg gelang 丁腈橡胶 形圈，15 毫米内径，18 毫米外径（1 50 个） o型圈 rs专业版