SCHNEIDER ELECTRIC

Electricals

electricals

Circuit Breaker

circuit-breaker

Contactor Accessories

contactor-accessories

Contactors

contactors

Fuses & Fusegear

fuses-fusegear

Circuit Breakers

circuit-breakers

Molded Case Circuit Breakers - MCCBs

molded-case-circuit-breakers-mccbs

Motor Protection Circuit Breakers

motor-protection-circuit-breakers

Motor Starter

motor-starter

Surge Protection Devices

surge-protection-devices

Abb OVR T2 3N 40-275 P TS QS Surge Protective Device Arrester Ii 100KA 4P

Surge protective devices SPD type 2 protect low-voltage consumer systems against surge voltages as they are tested as SPD type 2 according to IEC 61643-11. The devices are compatible with the System pro M compact series. The SPD with "TS" are optionally equipped with a auxiliary contact. The variants with "reserve varistor" (s) offer additional protection for the system, as the SPD is not completely disconnected from the mains at the end of its service life, but with an additional smaller varistor still guarantees basic protection and the system thus until the surge arrester is replaced is still protected

Type of Low Voltage Distribution System:TT

Suitable For:To protect the systems against the transient overvoltage (lightning)

Nominal AC Voltage of the System (Uo):230 / 400 V

Maximum Continuous Operating Voltage (Uc):(L-PE) 275 V

Temporary Overvoltage Test Value (UT):(L-N) 337 V

Rated Service Short-Circuit Breaking Capacity (Ics):100 kA

Discharge Current:Nominal (8 / 20 µs) 20 kA

Impulse Current:I (imp, 10 / 350 µs) 2 kA

Short-Circuit Protective Devices:gG Type Fuses N A

Options Provided:Residential, commercial building.

Auxiliary Circuit Load:Minimum 12Vdc - 10mA

<h3 class="md-block-header-three">Abb OVR T2 3N 40-275 P TS QS Surge Protective Device Arrester Ii 100KA 4P</h3><ul class="md-block-unordered-list-item"><li>Surge protective devices SPD type 2 protect low-voltage consumer systems against surge voltages as they are tested as SPD type 2 according to IEC 61643-11. The devices are compatible with the System pro M compact series. The SPD with &quot;TS&quot; are optionally equipped with a auxiliary contact. The variants with &quot;reserve varistor&quot; (s) offer additional protection for the system, as the SPD is not completely disconnected from the mains at the end of its service life, but with an additional smaller varistor still guarantees basic protection and the system thus until the surge arrester is replaced is still protected</li><li>Product Net Width:71.2 mm</li><li>Product Net Height:95.8 mm</li><li>Product Net Depth / Length:76.7 mm</li><li>Product Net Weight:0.6 kg</li><li>Unit of measurement : Pcs</li></ul>Technical<ul class="md-block-unordered-list-item"><li>Standards:IEC 61643-11 / EN 61643-11</li><li>Type of Low Voltage Distribution System:TT</li><li>TN-S</li><li>Suitable For:To protect the systems against the transient overvoltage (lightning)</li><li>Rated Voltage (Ur):230 V AC</li><li>Nominal AC Voltage of the System (Uo):230 / 400 V</li><li>Voltage Rating DC:350 V</li><li>Voltage Protection Level ( Up):1.5 kV</li><li>(L-N) 1.25 kV</li><li>(N-PE) 1.4 kV</li><li>Maximum Continuous Operating Voltage (Uc):(L-PE) 275 V</li><li>Temporary Overvoltage Test Value (UT):(L-N) 337 V</li><li>(N-PE) 1200 V</li><li>Rated Service Short-Circuit Breaking Capacity (Ics):100 kA</li><li>Discharge Current:Nominal (8 / 20 µs) 20 kA</li><li>I (max, 8 / 20 µs) 20 kA</li><li>Impulse Current:I (imp, 10 / 350 µs) 2 kA</li><li>Short Circuit Withstand Icc:100 kA</li><li>Power Loss:29 mW</li><li>Short-Circuit Protective Devices:gG Type Fuses N A</li><li>Arrester Class:II</li><li>Number of Poles:4</li><li>Number of Protected Poles:4</li><li>Number of Auxiliary Contacts NC:1</li><li>Number of Auxiliary Contacts NO:1</li><li>Number of Conductors:4</li><li>Position of Neutral Terminals:Right</li><li>Transmission Standard:Optic</li><li>Version:Plug-in</li><li>Mounting Type:DIN-Rail</li><li>Product Type:QS</li><li>Options Provided:Residential, commercial building.</li><li>Auxiliary Circuit Load:Minimum 12Vdc - 10mA</li><li>Maximum 250Vac - 1A</li><li>Preventive Maintenance Feature:No</li><li>Status Indicator:Yes</li><li>Fuse Size:4 modular spacing</li></ul>

<h3>Abb OVR T2 3N 40-275 P TS QS Surge Protective Device Arrester Ii 100KA 4P</h3>
<ul>
<li>Surge protective devices SPD type 2 protect low-voltage consumer systems against surge voltages as they are tested as SPD type 2 according to IEC 61643-11. The devices are compatible with the System pro M compact series. The SPD with "TS" are optionally equipped with a auxiliary contact. The variants with "reserve varistor" (s) offer additional protection for the system, as the SPD is not completely disconnected from the mains at the end of its service life, but with an additional smaller varistor still guarantees basic protection and the system thus until the surge arrester is replaced is still protected</li>
<li>Product Net Width:71.2 mm</li>
<li>Product Net Height:95.8 mm</li>
<li>Product Net Depth / Length:76.7 mm</li>
<li>Product Net Weight:0.6 kg</li>
<li>Unit of measurement : Pcs</li>
</ul>
Technical
<ul>
<li>Standards:IEC 61643-11 / EN 61643-11</li>
<li>Type of Low Voltage Distribution System:TT</li>
<li>TN-S</li>
<li>Suitable For:To protect the systems against the transient overvoltage (lightning)</li>
<li>Rated Voltage (Ur):230 V AC</li>
<li>Nominal AC Voltage of the System (Uo):230 / 400 V</li>
<li>Voltage Rating DC:350 V</li>
<li>Voltage Protection Level ( Up):1.5 kV</li>
<li>(L-N) 1.25 kV</li>
<li>(N-PE) 1.4 kV</li>
<li>Maximum Continuous Operating Voltage (Uc):(L-PE) 275 V</li>
<li>Temporary Overvoltage Test Value (UT):(L-N) 337 V</li>
<li>(N-PE) 1200 V</li>
<li>Rated Service Short-Circuit Breaking Capacity (Ics):100 kA</li>
<li>Discharge Current:Nominal (8 / 20 µs) 20 kA</li>
<li>I (max, 8 / 20 µs) 20 kA</li>
<li>Impulse Current:I (imp, 10 / 350 µs) 2 kA</li>
<li>Short Circuit Withstand Icc:100 kA</li>
<li>Power Loss:29 mW</li>
<li>Short-Circuit Protective Devices:gG Type Fuses N A</li>
<li>Arrester Class:II</li>
<li>Number of Poles:4</li>
<li>Number of Protected Poles:4</li>
<li>Number of Auxiliary Contacts NC:1</li>
<li>Number of Auxiliary Contacts NO:1</li>
<li>Number of Conductors:4</li>
<li>Position of Neutral Terminals:Right</li>
<li>Transmission Standard:Optic</li>
<li>Version:Plug-in</li>
<li>Mounting Type:DIN-Rail</li>
<li>Product Type:QS</li>
<li>Options Provided:Residential, commercial building.</li>
<li>Auxiliary Circuit Load:Minimum 12Vdc - 10mA</li>
<li>Maximum 250Vac - 1A</li>
<li>Preventive Maintenance Feature:No</li>
<li>Status Indicator:Yes</li>
<li>Fuse Size:4 modular spacing</li>
</ul>
&nbsp;

Jimmy Foo

Philips

Thomas & Betts

BRADY

Bussmann

Weidmuller

FUJI

Crouse-Hinds

Plugs & Connector 

Light Bulbs

Led Lights

Junction & Enclosure Box

Other Electrical Accessories

Light Tubes

Doreen Tan

buyerIntroduction

abb ovr t2 3n 40-275 ts qs surge protective device arrester ii 100ka 4p alat pelindung lonjakan protection devices perangkat perlindungan peranti penangkap 电涌保护器 避雷器

abb-ovr-t2-3n-40-275-p-ts-qs-surge-protective-device-arrester-ii-100ka-4p

Catalog Description:MS132-4.0 Manual Motor Starter 2.5 ... 4.0 A

Long Description:The MS132-4.0 manual motor starter (also known as motor protection circuit breaker or manual motor protector) is a compact 45 mm width device with a rated operational current of Ie = 4.00 A. This device is used to manually switch on and off motors and to protect them reliably and without the need for a fuse from short-circuits, overload and phase failures. The manual motor starter offers a rated service short-circuit breaking capacity Ics = 100 kA at 400 VAC and trip class 10. Further features are the build-in disconnect function, temperature compensation, trip-free mechanism and a rotary handle with a clear switch position indication. The manual motor starter is suitable for three- and single-phase applications. The handle is lockable to protect against unauthorized changes. Auxiliary contacts, signaling contacts, undervoltage releases, shunt trips, 3-phase bus bars, power in-feed blocks and terminal spacers are available as accessory.

Rated Service Short-Circuit Breaking Capacity (Ics):(230 V AC) 100 kA

Rated Ultimate Short-Circuit Breaking Capacity (Icu):(230 V AC) 100 kA

Rated Instantaneous Short-Circuit Current Setting (Ii):50 A

Rated Operational Power AC-3 (Pe):(400 V) Three Phase 1.5 kW

Rated Operational Power AC-3e (Pe):(400 V) Three Phase 1.5 kW

Rated Operational Voltage:Main Circuit 690 V AC

Rated Impulse Withstand Voltage (Uimp):Main Circuit 6 kV

Power Loss:at Rated Operating Conditions per Pole 0.7 ... 1.8 W

Conventional Free-air Thermal Current (Ith):Main Circuit 4 A

Connecting Capacity Main Circuit:Flexible with Ferrule 1/2x 0.75 ... 2.5 mm²

Flexible with Insulated Ferrule 1/2x 0.75 ... 2.5 mm²

Tightening Torque:Main Circuit 0.8 ... 1.2 N·m

Mounting on DIN Rail:TH35-15 (35 x 15 mm Mounting Rail) acc. to IEC 60715

TH35-7.5 (35 x 7.5 mm Mounting Rail) acc. to IEC 60715

Minimum Mounting Distance:Electrical Conductive Board, Horizontal - Up to 400 V 0 mm

Electrical Conductive Board, Horizontal - Up to 690 V 1.5 mm

Electrical Conductive Board, Vertical 75 mm

Contact Position Indication:ON / OFF / TRIP

Remarks:UL508 Self-Protected Combination Motor Controller (Type E) in combination with feeder block S1-M3-xx

Short-Circuit Current Rating (SCCR):Manual Self-Protected Combination Controllers (Type E), (480Y / 277 V AC) 65 kA

Manual Self-Protected Combination Controllers (Type E), (600Y / 347 V AC) 47 kA

Any UL Listed Fuses or Circuit-Breakers, Group Installations (480 V AC) 65 kA

Any UL Listed Fuses or Circuit-Breakers, Group Installations (600 V AC) 47 kA

Any UL Listed Fuses or Circuit-Breakers, Motor Disconnect (480 V AC) 65 kA

Any UL Listed Fuses or Circuit-Breakers, Motor Disconnect (600 V AC) 47 kA

Any UL Listed Fuses or Circuit-Breakers, Tap Conductor Protection in Group Installations (480Y / 277 V AC) 65 kA

Any UL Listed Fuses or Circuit-Breakers, Tap Conductor Protection in Group Installations (600Y / 347 V AC) 47 kA

Maximum Operating Voltage UL/CSA:Main Circuit 600 V AC

Horsepower Rating UL/CSA:(200 V AC) Three Phase 0.75 Hp

Full Load Amps Motor Use:(200 V AC) Three Phase 4 A

Locked Rotor Amps:(200 V AC) Three Phase 24 A

Connecting Capacity Main Circuit UL/CSA:Flexible 1/2x 16-12 AWG

Tightening Torque UL/CSA:Main Circuit 10 ... 12 in·lb

<h3 class="md-block-header-three">Abb MS132-4.0 Starter Motor Manual 4A</h3> <ul class="md-block-unordered-list-item"><li>Extended Product Type:MS132-4.0</li><li>Product ID:1SAM350000R1008</li><li>EAN:4013614400087</li><li>Catalog Description:MS132-4.0 Manual Motor Starter 2.5 ... 4.0 A</li><li>Long Description:The MS132-4.0 manual motor starter (also known as motor protection circuit breaker or manual motor protector) is a compact 45 mm width device with a rated operational current of Ie = 4.00 A. This device is used to manually switch on and off motors and to protect them reliably and without the need for a fuse from short-circuits, overload and phase failures. The manual motor starter offers a rated service short-circuit breaking capacity Ics = 100 kA at 400 VAC and trip class 10. Further features are the build-in disconnect function, temperature compensation, trip-free mechanism and a rotary handle with a clear switch position indication. The manual motor starter is suitable for three- and single-phase applications. The handle is lockable to protect against unauthorized changes. Auxiliary contacts, signaling contacts, undervoltage releases, shunt trips, 3-phase bus bars, power in-feed blocks and terminal spacers are available as accessory.</li><li>Unit of Measurement : PCS</li></ul>Technical<ul class="md-block-unordered-list-item"><li>Rated Service Short-Circuit Breaking Capacity (Ics):(230 V AC) 100 kA</li><li>(250 V DC) 3 Poles in Series 10 kA</li><li>(400 V AC) 100 kA</li><li>(440 V AC) 30 kA</li><li>(500 V AC) 20 kA</li><li>(690 V AC) 3 kA</li><li>Rated Ultimate Short-Circuit Breaking Capacity (Icu):(230 V AC) 100 kA</li><li>(400 V AC) 100 kA</li><li>(440 V AC) 30 kA</li><li>(500 V AC) 20 kA</li><li>(690 V AC) 3 kA</li><li>Rated Instantaneous Short-Circuit Current Setting (Ii):50 A</li><li>Setting Range:2.5 ... 4.0 A</li><li>Rated Operational Power AC-3 (Pe):(400 V) Three Phase 1.5 kW</li><li>Rated Operational Power AC-3e (Pe):(400 V) Three Phase 1.5 kW</li><li>Rated Operational Voltage:Main Circuit 690 V AC</li><li>Main Circuit 250 V DC</li><li>Rated Operational Current (Ie):4 A</li><li>Rated Operational Current AC-3 (Ie):4 A</li><li>Rated Operational Current AC-3e (Ie):4 A</li><li>Rated Operational Current DC-5 (Ie):4 A</li><li>Rated Frequency (f):Main Circuit 50 Hz</li><li>Main Circuit 60 Hz</li><li>Operating Frequency (fsw):0 ... 400 Hz</li><li>Rated Impulse Withstand Voltage (Uimp):Main Circuit 6 kV</li><li>Rated Insulation Voltage (Ui):690 V</li><li>Power Loss:at Rated Operating Conditions per Pole 0.7 ... 1.8 W</li><li>Number of Poles:3</li><li>Conventional Free-air Thermal Current (Ith):Main Circuit 4 A</li><li>Degree of Protection:Housing IP20</li><li>Main Circuit Terminals IP10</li><li>Pollution Degree:3</li><li>Electrical Durability:50000 cycle</li><li>Mechanical Durability:100000 cycle</li><li>Terminal Type:Screw Terminals</li><li>Connecting Capacity Main Circuit:Flexible with Ferrule 1/2x 0.75 ... 2.5 mm²</li><li>Flexible with Insulated Ferrule 1/2x 0.75 ... 2.5 mm²</li><li>Flexible 1/2x 0.75 ... 2.5 mm²</li><li>Rigid 1/2x 1 ... 4 mm²</li><li>Tightening Torque:Main Circuit 0.8 ... 1.2 N·m</li><li>Wire Stripping Length:Main Circuit 9 mm</li><li>Recommended Screw Driver:Pozidriv 2</li><li>Mounting Position:1 ... 6</li><li>Mounting on DIN Rail:TH35-15 (35 x 15 mm Mounting Rail) acc. to IEC 60715</li><li>TH35-7.5 (35 x 7.5 mm Mounting Rail) acc. to IEC 60715</li><li>Minimum Mounting Distance:Electrical Conductive Board, Horizontal - Up to 400 V 0 mm</li><li>Electrical Conductive Board, Horizontal - Up to 690 V 1.5 mm</li><li>Electrical Conductive Board, Vertical 75 mm</li><li>Other Device Same Type, Horizontal 0 mm</li><li>Other Device Same Type, Vertical 150 mm</li><li>Actuator Type:Rotary Handle</li><li>Contact Position Indication:ON / OFF / TRIP</li><li>Standards:IEC/EN 60947-1</li><li>IEC/EN 60947-2</li><li>IEC/EN 60947-4-1</li><li>UL 60947-1</li><li>UL 60947-4-1</li><li>Remarks:UL508 Self-Protected Combination Motor Controller (Type E) in combination with feeder block S1-M3-xx</li><li>Technical UL/CSA</li><li>Short-Circuit Current Rating (SCCR):Manual Self-Protected Combination Controllers (Type E), (480Y / 277 V AC) 65 kA</li><li>Manual Self-Protected Combination Controllers (Type E), (600Y / 347 V AC) 47 kA</li><li>Any UL Listed Fuses or Circuit-Breakers, Group Installations (480 V AC) 65 kA</li><li>Any UL Listed Fuses or Circuit-Breakers, Group Installations (600 V AC) 47 kA</li><li>Any UL Listed Fuses or Circuit-Breakers, Motor Disconnect (480 V AC) 65 kA</li><li>Any UL Listed Fuses or Circuit-Breakers, Motor Disconnect (600 V AC) 47 kA</li><li>Any UL Listed Fuses or Circuit-Breakers, Tap Conductor Protection in Group Installations (480Y / 277 V AC) 65 kA</li><li>Any UL Listed Fuses or Circuit-Breakers, Tap Conductor Protection in Group Installations (600Y / 347 V AC) 47 kA</li><li>Maximum Operating Voltage UL/CSA:Main Circuit 600 V AC</li><li>Horsepower Rating UL/CSA:(200 V AC) Three Phase 0.75 Hp</li><li>(208 V AC) Three Phase 0.75 Hp</li><li>(220 ... 240 V AC) Three Phase 1 Hp</li><li>(440 ... 480 V AC) Three Phase 2 Hp</li><li>(550 ... 600 V AC) Three Phase 3 Hp</li><li>Full Load Amps Motor Use:(200 V AC) Three Phase 4 A</li><li>(208 V AC) Three Phase 4 A</li><li>(220 ... 240 V AC) Three Phase 4 A</li><li>(440 ... 480 V AC) Three Phase 4 A</li><li>(550 ... 600 V AC) Three Phase 3.9 A</li><li>Locked Rotor Amps:(200 V AC) Three Phase 24 A</li><li>(208 V AC) Three Phase 24 A</li><li>(220 ... 240 V AC) Three Phase 24 A</li><li>(440 ... 480 V AC) Three Phase 24 A</li><li>(550 ... 600 V AC) Three Phase 25.6 A</li><li>General Use Rating UL/CSA:(600 V AC) 4 A</li><li>Connecting Capacity Main Circuit UL/CSA:Flexible 1/2x 16-12 AWG</li><li>Stranded 1/2x 16-12 AWG</li><li>Tightening Torque UL/CSA:Main Circuit 10 ... 12 in·lb</li></ul>

<h3>Abb MS132-4.0 Starter Motor Manual 4A</h3>
&nbsp;&nbsp;
<ul>
<li>Extended Product Type:MS132-4.0</li>
<li>Product ID:1SAM350000R1008</li>
<li>EAN:4013614400087</li>
<li>Catalog Description:MS132-4.0 Manual Motor Starter 2.5 ... 4.0 A</li>
<li>Long Description:The MS132-4.0 manual motor starter (also known as motor protection circuit breaker or manual motor protector) is a compact 45 mm width device with a rated operational current of Ie = 4.00 A. This device is used to manually switch on and off motors and to protect them reliably and without the need for a fuse from short-circuits, overload and phase failures. The manual motor starter offers a rated service short-circuit breaking capacity Ics = 100 kA at 400 VAC and trip class 10. Further features are the build-in disconnect function, temperature compensation, trip-free mechanism and a rotary handle with a clear switch position indication. The manual motor starter is suitable for three- and single-phase applications. The handle is lockable to protect against unauthorized changes. Auxiliary contacts, signaling contacts, undervoltage releases, shunt trips, 3-phase bus bars, power in-feed blocks and terminal spacers are available as accessory.</li>
<li>Unit of Measurement : PCS</li>
</ul>
Technical
<ul>
<li>Rated Service Short-Circuit Breaking Capacity (Ics):(230 V AC) 100 kA</li>
<li>(250 V DC) 3 Poles in Series 10 kA</li>
<li>(400 V AC) 100 kA</li>
<li>(440 V AC) 30 kA</li>
<li>(500 V AC) 20 kA</li>
<li>(690 V AC) 3 kA</li>
<li>Rated Ultimate Short-Circuit Breaking Capacity (Icu):(230 V AC) 100 kA</li>
<li>(400 V AC) 100 kA</li>
<li>(440 V AC) 30 kA</li>
<li>(500 V AC) 20 kA</li>
<li>(690 V AC) 3 kA</li>
<li>Rated Instantaneous Short-Circuit Current Setting (Ii):50 A</li>
<li>Setting Range:2.5 ... 4.0 A</li>
<li>Rated Operational Power AC-3 (Pe):(400 V) Three Phase 1.5 kW</li>
<li>Rated Operational Power AC-3e (Pe):(400 V) Three Phase 1.5 kW</li>
<li>Rated Operational Voltage:Main Circuit 690 V AC</li>
<li>Main Circuit 250 V DC</li>
<li>Rated Operational Current (Ie):4 A</li>
<li>Rated Operational Current AC-3 (Ie):4 A</li>
<li>Rated Operational Current AC-3e (Ie):4 A</li>
<li>Rated Operational Current DC-5 (Ie):4 A</li>
<li>Rated Frequency (f):Main Circuit 50 Hz</li>
<li>Main Circuit 60 Hz</li>
<li>Operating Frequency (fsw):0 ... 400 Hz</li>
<li>Rated Impulse Withstand Voltage (Uimp):Main Circuit 6 kV</li>
<li>Rated Insulation Voltage (Ui):690 V</li>
<li>Power Loss:at Rated Operating Conditions per Pole 0.7 ... 1.8 W</li>
<li>Number of Poles:3</li>
<li>Conventional Free-air Thermal Current (Ith):Main Circuit 4 A</li>
<li>Degree of Protection:Housing IP20</li>
<li>Main Circuit Terminals IP10</li>
<li>Pollution Degree:3</li>
<li>Electrical Durability:50000 cycle</li>
<li>Mechanical Durability:100000 cycle</li>
<li>Terminal Type:Screw Terminals</li>
<li>Connecting Capacity Main Circuit:Flexible with Ferrule 1/2x 0.75 ... 2.5 mm²</li>
<li>Flexible with Insulated Ferrule 1/2x 0.75 ... 2.5 mm²</li>
<li>Flexible 1/2x 0.75 ... 2.5 mm²</li>
<li>Rigid 1/2x 1 ... 4 mm²</li>
<li>Tightening Torque:Main Circuit 0.8 ... 1.2 N·m</li>
<li>Wire Stripping Length:Main Circuit 9 mm</li>
<li>Recommended Screw Driver:Pozidriv 2</li>
<li>Mounting Position:1 ... 6</li>
<li>Mounting on DIN Rail:TH35-15 (35 x 15 mm Mounting Rail) acc. to IEC 60715</li>
<li>TH35-7.5 (35 x 7.5 mm Mounting Rail) acc. to IEC 60715</li>
<li>Minimum Mounting Distance:Electrical Conductive Board, Horizontal - Up to 400 V 0 mm</li>
<li>Electrical Conductive Board, Horizontal - Up to 690 V 1.5 mm</li>
<li>Electrical Conductive Board, Vertical 75 mm</li>
<li>Other Device Same Type, Horizontal 0 mm</li>
<li>Other Device Same Type, Vertical 150 mm</li>
<li>Actuator Type:Rotary Handle</li>
<li>Contact Position Indication:ON / OFF / TRIP</li>
<li>Standards:IEC/EN 60947-1</li>
<li>IEC/EN 60947-2</li>
<li>IEC/EN 60947-4-1</li>
<li>UL 60947-1</li>
<li>UL 60947-4-1</li>
<li>Remarks:UL508 Self-Protected Combination Motor Controller (Type E) in combination with feeder block S1-M3-xx</li>
<li>Technical UL/CSA</li>
<li>Short-Circuit Current Rating (SCCR):Manual Self-Protected Combination Controllers (Type E), (480Y / 277 V AC) 65 kA</li>
<li>Manual Self-Protected Combination Controllers (Type E), (600Y / 347 V AC) 47 kA</li>
<li>Any UL Listed Fuses or Circuit-Breakers, Group Installations (480 V AC) 65 kA</li>
<li>Any UL Listed Fuses or Circuit-Breakers, Group Installations (600 V AC) 47 kA</li>
<li>Any UL Listed Fuses or Circuit-Breakers, Motor Disconnect (480 V AC) 65 kA</li>
<li>Any UL Listed Fuses or Circuit-Breakers, Motor Disconnect (600 V AC) 47 kA</li>
<li>Any UL Listed Fuses or Circuit-Breakers, Tap Conductor Protection in Group Installations (480Y / 277 V AC) 65 kA</li>
<li>Any UL Listed Fuses or Circuit-Breakers, Tap Conductor Protection in Group Installations (600Y / 347 V AC) 47 kA</li>
<li>Maximum Operating Voltage UL/CSA:Main Circuit 600 V AC</li>
<li>Horsepower Rating UL/CSA:(200 V AC) Three Phase 0.75 Hp</li>
<li>(208 V AC) Three Phase 0.75 Hp</li>
<li>(220 ... 240 V AC) Three Phase 1 Hp</li>
<li>(440 ... 480 V AC) Three Phase 2 Hp</li>
<li>(550 ... 600 V AC) Three Phase 3 Hp</li>
<li>Full Load Amps Motor Use:(200 V AC) Three Phase 4 A</li>
<li>(208 V AC) Three Phase 4 A</li>
<li>(220 ... 240 V AC) Three Phase 4 A</li>
<li>(440 ... 480 V AC) Three Phase 4 A</li>
<li>(550 ... 600 V AC) Three Phase 3.9 A</li>
<li>Locked Rotor Amps:(200 V AC) Three Phase 24 A</li>
<li>(208 V AC) Three Phase 24 A</li>
<li>(220 ... 240 V AC) Three Phase 24 A</li>
<li>(440 ... 480 V AC) Three Phase 24 A</li>
<li>(550 ... 600 V AC) Three Phase 25.6 A</li>
<li>General Use Rating UL/CSA:(600 V AC) 4 A</li>
<li>Connecting Capacity Main Circuit UL/CSA:Flexible 1/2x 16-12 AWG</li>
<li>Stranded 1/2x 16-12 AWG</li>
<li>Tightening Torque UL/CSA:Main Circuit 10 ... 12 in·lb</li>
</ul>

Abb MS132-4.0 Starter Motor Manual 4A

abb ms132-4.0 starter motor manual 4a panduan pemula penghidup ms132-4.0起动电机手册4a

abb-ms132-4-0-starter-motor-manual-4a

Catalog Description:MS116-1.6 Manual Motor Starter 1.0 ... 1.6 A

Long Description:The MS116-1.6 manual motor starter (also known as motor protection circuit breaker or manual motor protector) is a compact 45 mm width device with a rated operational current of Ie = 1.6 A. This device is used to manually switch on and off motors and to protect them reliably and without the need for a fuse from short-circuits, overload and phase failures. The manual motor starter offers a rated service short-circuit breaking capacity Ics = 50 kA at 400 VAC and trip class 10A. Further features are the build-in disconnect function, temperature compensation, trip-free mechanism and a rotary handle with a clear switch position indication. The manual motor starter is suitable for three- and single-phase applications. Auxiliary contacts, signaling contacts, undervoltage releases, shunt trips, 3-phase bus bars, power in-feed blocks and locking devices for protection against unauthorized changes are available as accessory.

Rated Service Short-Circuit Breaking Capacity (Ics):(230 V AC) 50 kA

Rated Instantaneous Short-Circuit Current Setting (Ii):20 A

Rated Operational Power AC-3 (Pe):(400 V) Three Phase 0.55 kW

Rated Operational Power AC-3e (Pe):(400 V) Three Phase 0.55 kW

Rated Operational Current AC-3 (Ie):1.6 A

Rated Operational Current AC-3e (Ie):1.6 A

Power Loss:at Rated Operating Conditions per Pole 0.6 ... 1.7 W

Conventional Free-air Thermal Current (Ith):Main Circuit 1.6 A

<h3 class="md-block-header-three">Abb MS116-1.6 Starter Manual 1-1.6A</h3> <ul class="md-block-unordered-list-item"><li>Extended Product Type:MS116-1.6</li><li>Product ID:1SAM250000R1006</li><li>EAN:4013614320293</li><li>Catalog Description:MS116-1.6 Manual Motor Starter 1.0 ... 1.6 A</li><li>Long Description:The MS116-1.6 manual motor starter (also known as motor protection circuit breaker or manual motor protector) is a compact 45 mm width device with a rated operational current of Ie = 1.6 A. This device is used to manually switch on and off motors and to protect them reliably and without the need for a fuse from short-circuits, overload and phase failures. The manual motor starter offers a rated service short-circuit breaking capacity Ics = 50 kA at 400 VAC and trip class 10A. Further features are the build-in disconnect function, temperature compensation, trip-free mechanism and a rotary handle with a clear switch position indication. The manual motor starter is suitable for three- and single-phase applications. Auxiliary contacts, signaling contacts, undervoltage releases, shunt trips, 3-phase bus bars, power in-feed blocks and locking devices for protection against unauthorized changes are available as accessory.</li><li>Unit of Measurement : PCS</li></ul>Technical<ul class="md-block-unordered-list-item"><li>Rated Service Short-Circuit Breaking Capacity (Ics):(230 V AC) 50 kA</li><li>(400 V AC) 50 kA</li><li>(440 V AC) 50 kA</li><li>(500 V AC) 30 kA</li><li>(690 V AC) 30 kA</li><li>Rated Ultimate Short-Circuit Breaking Capacity (Icu):(230 V AC) 100 kA</li><li>(400 V AC) 100 kA</li><li>(440 V AC) 100 kA</li><li>(500 V AC) 100 kA</li><li>(690 V AC) 100 kA</li><li>Rated Instantaneous Short-Circuit Current Setting (Ii):20 A</li><li>Setting Range:1.0 ... 1.6 A</li><li>Rated Operational Power AC-3 (Pe):(400 V) Three Phase 0.55 kW</li><li>Rated Operational Power AC-3e (Pe):(400 V) Three Phase 0.55 kW</li><li>Rated Operational Voltage:Main Circuit 690 V AC</li><li>Rated Operational Current (Ie):1.6 A</li><li>Rated Operational Current AC-3 (Ie):1.6 A</li><li>Rated Operational Current AC-3e (Ie):1.6 A</li><li>Rated Frequency (f):Main Circuit 50 Hz</li><li>Main Circuit 60 Hz</li><li>Rated Impulse Withstand Voltage (Uimp):Main Circuit 6 kV</li><li>Rated Insulation Voltage (Ui):690 V</li><li>Power Loss:at Rated Operating Conditions per Pole 0.6 ... 1.7 W</li><li>Number of Poles:3</li><li>Conventional Free-air Thermal Current (Ith):Main Circuit 1.6 A</li><li>Degree of Protection:Housing IP20</li><li>Main Circuit Terminals IP10</li><li>Pollution Degree:3</li><li>Electrical Durability:100000 cycle</li><li>Mechanical Durability:100000 cycle</li><li>Terminal Type:Screw Terminals</li><li>Connecting Capacity Main Circuit:Flexible with Ferrule 1/2x 0.75 ... 2.5 mm²</li><li>Flexible with Insulated Ferrule 1/2x 0.75 ... 2.5 mm²</li><li>Flexible 1/2x 0.75 ... 2.5 mm²</li><li>Rigid 1/2x 1 ... 4 mm²</li><li>Tightening Torque:Main Circuit 0.8 ... 1.2 N·m</li><li>Wire Stripping Length:Main Circuit 9 mm</li><li>Recommended Screw Driver:Pozidriv 2</li><li>Mounting Position:any</li><li>1 ... 6</li><li>Mounting on DIN Rail:TH35-15 (35 x 15 mm Mounting Rail) acc. to IEC 60715</li><li>TH35-7.5 (35 x 7.5 mm Mounting Rail) acc. to IEC 60715</li><li>Minimum Mounting Distance:Electrical Conductive Board, Horizontal - Up to 400 V 0 mm</li><li>Electrical Conductive Board, Horizontal - Up to 690 V 1.5 mm</li><li>Electrical Conductive Board, Vertical 75 mm</li><li>Other Device Same Type, Horizontal 0 mm</li><li>Other Device Same Type, Vertical 150 mm</li><li>Actuator Type:Rotary Handle</li><li>Contact Position Indication:ON / OFF</li><li>Standards:IEC/EN 60947-1</li><li>IEC/EN 60947-2</li><li>IEC/EN 60947-4-1</li><li>UL 60947-1</li><li>UL 60947-4-1</li></ul>

<h3>Abb MS116-1.6 Starter Manual 1-1.6A</h3>
&nbsp;&nbsp;
<ul>
<li>Extended Product Type:MS116-1.6</li>
<li>Product ID:1SAM250000R1006</li>
<li>EAN:4013614320293</li>
<li>Catalog Description:MS116-1.6 Manual Motor Starter 1.0 ... 1.6 A</li>
<li>Long Description:The MS116-1.6 manual motor starter (also known as motor protection circuit breaker or manual motor protector) is a compact 45 mm width device with a rated operational current of Ie = 1.6 A. This device is used to manually switch on and off motors and to protect them reliably and without the need for a fuse from short-circuits, overload and phase failures. The manual motor starter offers a rated service short-circuit breaking capacity Ics = 50 kA at 400 VAC and trip class 10A. Further features are the build-in disconnect function, temperature compensation, trip-free mechanism and a rotary handle with a clear switch position indication. The manual motor starter is suitable for three- and single-phase applications. Auxiliary contacts, signaling contacts, undervoltage releases, shunt trips, 3-phase bus bars, power in-feed blocks and locking devices for protection against unauthorized changes are available as accessory.</li>
<li>Unit of Measurement : PCS</li>
</ul>
Technical
<ul>
<li>Rated Service Short-Circuit Breaking Capacity (Ics):(230 V AC) 50 kA</li>
<li>(400 V AC) 50 kA</li>
<li>(440 V AC) 50 kA</li>
<li>(500 V AC) 30 kA</li>
<li>(690 V AC) 30 kA</li>
<li>Rated Ultimate Short-Circuit Breaking Capacity (Icu):(230 V AC) 100 kA</li>
<li>(400 V AC) 100 kA</li>
<li>(440 V AC) 100 kA</li>
<li>(500 V AC) 100 kA</li>
<li>(690 V AC) 100 kA</li>
<li>Rated Instantaneous Short-Circuit Current Setting (Ii):20 A</li>
<li>Setting Range:1.0 ... 1.6 A</li>
<li>Rated Operational Power AC-3 (Pe):(400 V) Three Phase 0.55 kW</li>
<li>Rated Operational Power AC-3e (Pe):(400 V) Three Phase 0.55 kW</li>
<li>Rated Operational Voltage:Main Circuit 690 V AC</li>
<li>Rated Operational Current (Ie):1.6 A</li>
<li>Rated Operational Current AC-3 (Ie):1.6 A</li>
<li>Rated Operational Current AC-3e (Ie):1.6 A</li>
<li>Rated Frequency (f):Main Circuit 50 Hz</li>
<li>Main Circuit 60 Hz</li>
<li>Rated Impulse Withstand Voltage (Uimp):Main Circuit 6 kV</li>
<li>Rated Insulation Voltage (Ui):690 V</li>
<li>Power Loss:at Rated Operating Conditions per Pole 0.6 ... 1.7 W</li>
<li>Number of Poles:3</li>
<li>Conventional Free-air Thermal Current (Ith):Main Circuit 1.6 A</li>
<li>Degree of Protection:Housing IP20</li>
<li>Main Circuit Terminals IP10</li>
<li>Pollution Degree:3</li>
<li>Electrical Durability:100000 cycle</li>
<li>Mechanical Durability:100000 cycle</li>
<li>Terminal Type:Screw Terminals</li>
<li>Connecting Capacity Main Circuit:Flexible with Ferrule 1/2x 0.75 ... 2.5 mm²</li>
<li>Flexible with Insulated Ferrule 1/2x 0.75 ... 2.5 mm²</li>
<li>Flexible 1/2x 0.75 ... 2.5 mm²</li>
<li>Rigid 1/2x 1 ... 4 mm²</li>
<li>Tightening Torque:Main Circuit 0.8 ... 1.2 N·m</li>
<li>Wire Stripping Length:Main Circuit 9 mm</li>
<li>Recommended Screw Driver:Pozidriv 2</li>
<li>Mounting Position:any</li>
<li>1 ... 6</li>
<li>Mounting on DIN Rail:TH35-15 (35 x 15 mm Mounting Rail) acc. to IEC 60715</li>
<li>TH35-7.5 (35 x 7.5 mm Mounting Rail) acc. to IEC 60715</li>
<li>Minimum Mounting Distance:Electrical Conductive Board, Horizontal - Up to 400 V 0 mm</li>
<li>Electrical Conductive Board, Horizontal - Up to 690 V 1.5 mm</li>
<li>Electrical Conductive Board, Vertical 75 mm</li>
<li>Other Device Same Type, Horizontal 0 mm</li>
<li>Other Device Same Type, Vertical 150 mm</li>
<li>Actuator Type:Rotary Handle</li>
<li>Contact Position Indication:ON / OFF</li>
<li>Standards:IEC/EN 60947-1</li>
<li>IEC/EN 60947-2</li>
<li>IEC/EN 60947-4-1</li>
<li>UL 60947-1</li>
<li>UL 60947-4-1</li>
</ul>

Abb MS116-1.6 Starter Manual 1-1.6A

abb ms116-1.6 starter manual 1-1.6a panduan pemula motor ms116-1.6入门手册1-1.6a

abb-ms116-1-6-starter-manual-1-1-6a

Schneider Electric GV1L3 Current Limiter,tesys Deca Frame 2,32A/690V,activation 1.5kA,at Top of GV2ME/GV2P/GV2RT With Screw Clamp Connections

 TeSys GV short circuit current limiter block for motor circuit breakers GV2L/LE/P/ME/RT. It increases the ability of the circuit breaker to withstand a short circuit current from 50 kA to 100/130kA@400 V. To be mounted on top of a GV2 motor circuit breaker. It conforms to RoHS/REACh regulation.

Increasing the breaking capacity of a circuit breaker

[Ith] Conventional Free Air Thermal Current:

690 V AC 50/60 Hz conforming to IEC 60947-1

Screw Clamp Terminals 1 x 1.5…25 mm² Rigid

Screw Clamp Terminals 2 x 1.5…10 mm² Rigid

Screw Clamp Terminals 1 x 1.5…25 mm² Flexible without Cable End

Screw Clamp Terminals 2 x 1.5…10 mm² Flexible without Cable End

Screw Clamp Terminals 1 x 1.5…16 mm² Flexible with Cable End

Screw Clamp Terminals 2 x 1.5…4 mm² Flexible with Cable End

<h3 class="md-block-header-three">Schneider Electric GV1L3 Current Limiter,tesys Deca Frame 2,32A/690V,activation 1.5kA,at Top of GV2ME/GV2P/GV2RT With Screw Clamp Connections</h3> TeSys GV short circuit current limiter block for motor circuit breakers GV2L/LE/P/ME/RT. It increases the ability of the circuit breaker to withstand a short circuit current from 50 kA to 100/130kA@400 V. To be mounted on top of a GV2 motor circuit breaker. It conforms to RoHS/REACh regulation.Specifications: Product Description:Range:<ul class="md-block-unordered-list-item"><li>TeSys</li></ul>Range of Product:<ul class="md-block-unordered-list-item"><li>TeSys GV2</li><li>TeSys Deca</li></ul>Accessory / Separate Part Category:<ul class="md-block-unordered-list-item"><li>Protection Accessory</li></ul>Product or Component Type:<ul class="md-block-unordered-list-item"><li>Current Limiting Module</li></ul>Range Compatibility:<ul class="md-block-unordered-list-item"><li>TeSys GV2</li><li>TeSys Deca</li></ul>Product Compatibility:<ul class="md-block-unordered-list-item"><li>GV2RT</li><li>GV2ME</li><li>GV2P</li><li>GV2L</li></ul>Function of Module:<ul class="md-block-unordered-list-item"><li>Increasing the breaking capacity of a circuit breaker</li></ul>Mounting Location:<ul class="md-block-unordered-list-item"><li>On top of the circuit breaker</li></ul>[Ie] Rated Operational Current:<ul class="md-block-unordered-list-item"><li>32 A</li></ul>[Ith] Conventional Free Air Thermal Current:<ul class="md-block-unordered-list-item"><li>63 A conforming to IEC 60947-1</li></ul>Activation Threshold:<ul class="md-block-unordered-list-item"><li>1500 A</li></ul>Breaking Capacity:<ul class="md-block-unordered-list-item"><li>&lt;= 100 kA depending on protective device</li></ul>[Ue] Rated Operational Voltage:<ul class="md-block-unordered-list-item"><li>690 V AC 50/60 Hz</li></ul>[Ui] Rated Insulation Voltage:<ul class="md-block-unordered-list-item"><li>690 V AC 50/60 Hz conforming to IEC 60947-1</li></ul>Complementary:<ul class="md-block-unordered-list-item"><li>Connections - Terminals:</li><ul class="md-block-unordered-list-item"><li>Screw Clamp Terminals 1 x 1.5…25 mm² Rigid</li><li>Screw Clamp Terminals 2 x 1.5…10 mm² Rigid</li><li>Screw Clamp Terminals 1 x 1.5…25 mm² Flexible without Cable End</li><li>Screw Clamp Terminals 2 x 1.5…10 mm² Flexible without Cable End</li><li>Screw Clamp Terminals 1 x 1.5…16 mm² Flexible with Cable End</li><li>Screw Clamp Terminals 2 x 1.5…4 mm² Flexible with Cable End</li></ul><li>Tightening Torque: 2.2 N.m</li><li>Net Weight: 0.13 kg</li></ul>

<h3>Schneider Electric GV1L3 Current Limiter,tesys Deca Frame 2,32A/690V,activation 1.5kA,at Top of GV2ME/GV2P/GV2RT With Screw Clamp Connections</h3>
&nbsp;TeSys GV short circuit current limiter block for motor circuit breakers GV2L/LE/P/ME/RT. It increases the ability of the circuit breaker to withstand a short circuit current from 50 kA to 100/130kA@400 V. To be mounted on top of a GV2 motor circuit breaker. It conforms to RoHS/REACh regulation.
Specifications:&nbsp;
Product Description:
Range:
<ul>
<li>TeSys</li>
</ul>
Range of Product:
<ul>
<li>TeSys GV2</li>
<li>TeSys Deca</li>
</ul>
Accessory / Separate Part Category:
<ul>
<li>Protection Accessory</li>
</ul>
Product or Component Type:
<ul>
<li>Current Limiting Module</li>
</ul>
Range Compatibility:
<ul>
<li>TeSys GV2</li>
<li>TeSys Deca</li>
</ul>
Product Compatibility:
<ul>
<li>GV2RT</li>
<li>GV2ME</li>
<li>GV2P</li>
<li>GV2L</li>
</ul>
Function of Module:
<ul>
<li>Increasing the breaking capacity of a circuit breaker</li>
</ul>
Mounting Location:
<ul>
<li>On top of the circuit breaker</li>
</ul>
[Ie] Rated Operational Current:
<ul>
<li>32 A</li>
</ul>
[Ith] Conventional Free Air Thermal Current:
<ul>
<li>63 A conforming to IEC 60947-1</li>
</ul>
Activation Threshold:
<ul>
<li>1500 A</li>
</ul>
Breaking Capacity:
<ul>
<li>&lt;= 100 kA depending on protective device</li>
</ul>
[Ue] Rated Operational Voltage:
<ul>
<li>690 V AC 50/60 Hz</li>
</ul>
[Ui] Rated Insulation Voltage:
<ul>
<li>690 V AC 50/60 Hz conforming to IEC 60947-1</li>
</ul>
Complementary:
<ul>
<li>Connections - Terminals:</li>
<ul>
<li>Screw Clamp Terminals 1 x 1.5…25 mm² Rigid</li>
<li>Screw Clamp Terminals 2 x 1.5…10 mm² Rigid</li>
<li>Screw Clamp Terminals 1 x 1.5…25 mm² Flexible without Cable End</li>
<li>Screw Clamp Terminals 2 x 1.5…10 mm² Flexible without Cable End</li>
<li>Screw Clamp Terminals 1 x 1.5…16 mm² Flexible with Cable End</li>
<li>Screw Clamp Terminals 2 x 1.5…4 mm² Flexible with Cable End</li>
</ul>
<li>Tightening Torque: 2.2 N.m</li>
<li>Net Weight: 0.13 kg</li>
</ul>

Product Datasheet

Instruction sheet

Catalogue

Environmental disclosure

APC by Schneider Electric

CLIPSAL

Square D

Telemecanique

Pilot Lights

Light Switches

Miniature Circuit Breakers - MCBs

Uninterruptible Power Supply 

EasyPact Circuit Breakers 

Button Switch

Standby battery 

Overload Relays

Schneider

schneider electric gv1l3 current limiter,tesys deca frame 2,32a/690v,activation 1.5ka,at top gv2me/gv2p/gv2rt screw clamp connections pembatas arus, tesys 2,32a/690v, aktivasi 1,5ka, di atas dengan koneksi penjepit sekrup contactor accessories arus electric, rangka pengaktifan 1.5ka, bahagian sambungan pengapit skru electric/施耐德电气 电流限制器，tesys 框架 2，32a/690v，激活 1.5ka，位于 顶部，带螺钉夹连接 施耐德电气

schneider-electric-gv1l3-current-limiter-tesys-deca-frame-2-32a-690v-activation-1-5ka-at-top-of-gv2me-gv2p-gv2rt-with-screw-clamp-connections

SCHNEIDER ELECTRIC Motor Circuit Breaker, Tesys Deca, 3P, 2.5 to 4A, Thermal Magnetic, Screw Clamp Terminals, Rotary Handle GV2P08

 TeSys GV motor circuit breaker, 3 poles (3P), 4A/690V, for 3-phase motor applications 1.1-1.5kW@400V. It provides a thermal-magnetic protection with a thermal setting range 2.5-4A, magnetic tripping at 13xIn, high breaking capacity Icu 100kA@400V. Connection by screw clamp terminals. Start-stop control by rotary knob guaranteed for 100 000 cycles AC-3. Multi standards certified (IEC, UL, CSA, CCC, EAC, Marine, ATEX), Green Premium compliant (RoHS/REACh). 

<h3 class="md-block-header-three">SCHNEIDER ELECTRIC Motor Circuit Breaker, Tesys Deca, 3P, 2.5 to 4A, Thermal Magnetic, Screw Clamp Terminals, Rotary Handle GV2P08</h3><ul class="md-block-unordered-list-item"><li> TeSys GV motor circuit breaker, 3 poles (3P), 4A/690V, for 3-phase motor applications 1.1-1.5kW@400V. It provides a thermal-magnetic protection with a thermal setting range 2.5-4A, magnetic tripping at 13xIn, high breaking capacity Icu 100kA@400V. Connection by screw clamp terminals. Start-stop control by rotary knob guaranteed for 100 000 cycles AC-3. Multi standards certified (IEC, UL, CSA, CCC, EAC, Marine, ATEX), Green Premium compliant (RoHS/REACh). </li></ul>

<h3>SCHNEIDER ELECTRIC Motor Circuit Breaker, Tesys Deca, 3P, 2.5 to 4A, Thermal Magnetic, Screw Clamp Terminals, Rotary Handle GV2P08</h3>
<ul>
<li>&nbsp;TeSys GV motor circuit breaker, 3 poles (3P), 4A/690V, for 3-phase motor applications 1.1-1.5kW@400V. It provides a thermal-magnetic protection with a thermal setting range 2.5-4A, magnetic tripping at 13xIn, high breaking capacity Icu 100kA@400V. Connection by screw clamp terminals. Start-stop control by rotary knob guaranteed for 100 000 cycles AC-3. Multi standards certified (IEC, UL, CSA, CCC, EAC, Marine, ATEX), Green Premium compliant (RoHS/REACh).&nbsp;</li>
</ul>

spec sheet (GV2P08)

Schneider Electric GV2P08 Motor Circuit Breaker, Tesys Deca, 3P, 2.5 to 4A, Thermal Magnetic, Screw Clamp Terminals, Rotary Handle

schneider electric gv2p08 motor circuit breaker, tesys deca, 3p, 2.5 4a, thermal magnetic, screw clamp terminals, rotary handle pemutus sirkuit gv2p08, 2,5 hingga magnetik termal, terminal penjepit sekrup, pegangan putar protection breakers litar magnet terma, pengapit skru, pemegang electric/施耐德电气 电机断路器，tesys deca，3p，2.5 4a，热磁，螺丝夹端子，旋转手柄 施耐德电气

schneider-electric-gv2p08-motor-circuit-breaker-tesys-deca-3p-2-5-to-4a-thermal-magnetic-screw-clamp-terminals-rotary-handle

Schneider   Electric GV2ME08 Tesys GV2-Circuit breaker-thermal-magnetic - 2.5...4 a -   Screw Clamp Terminals 

TeSys GV   motor circuit breaker, 3 poles (3P), 4A/690V, for 3-phase motor applications   1.1-1.5kW@400V. It provides a thermal-magnetic protection with a thermal   setting range 2.5-4A, magnetic tripping at 13xIn, high breaking capacity Icu   100kA@400V. Connection by screw clamp terminals. Start-stop control by   push-button guaranteed for 100 000 cycles AC-3. Multi standards certified (IEC, UL, CSA,   CCC, EAC, Marine, ATEX), Green Premium compliant (RoHS/REACh).     

Schneider Electric GV2ME08 Tesys GV2-Circuit breaker-thermal-magnetic - 2.5...4 a - Screw Clamp Terminals TeSys GV motor circuit breaker, 3 poles (3P), 4A/690V, for 3-phase motor applications 1.1-1.5kW@400V. It provides a thermal-magnetic protection with a thermal setting range 2.5-4A, magnetic tripping at 13xIn, high breaking capacity Icu 100kA@400V. Connection by screw clamp terminals. Start-stop control by push-button guaranteed for 100 000 cycles AC-3. Multi standards certified (IEC, UL, CSA, CCC, EAC, Marine, ATEX), Green Premium compliant (RoHS/REACh).

Schneider Electric GV2ME08 Tesys GV2-Circuit breaker-thermal-magnetic - 2.5...4 a - Screw Clamp Terminals 
TeSys GV motor circuit breaker, 3 poles (3P), 4A/690V, for 3-phase motor applications 1.1-1.5kW@400V. It provides a thermal-magnetic protection with a thermal setting range 2.5-4A, magnetic tripping at 13xIn, high breaking capacity Icu 100kA@400V. Connection by screw clamp terminals. Start-stop control by push-button guaranteed for 100 000 cycles AC-3. Multi standards certified (IEC, UL, CSA, CCC, EAC, Marine, ATEX), Green Premium compliant (RoHS/REACh).&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;

Contact Block

Switch Socket Outlet

Electromechanical Interface Relays

Tricia

Schneider Electric GV2ME08 Tesys GV2-Circuit breaker-thermal-magnetic - 2.5...4 a - Screw Clamp Terminals

schneider electric gv2me08 tesys gv2-circuit breaker-thermal-magnetic 2.5...4 screw clamp terminals terminal penjepit sekrup motor protection circuit breakers gv2-pemutus litar-terma-magnet pengapit skru electric/施耐德电气 gv2-断路器-热磁 螺丝夹端子 施耐德电气

schneider-electric-gv2me08-tesys-gv2-circuit-breaker-thermal-magnetic-2-5-4-a-screw-clamp-terminals

Data Sheet

schneider electric gv2me08 tesys gv2-circuit breaker-thermal-magnetic 2.5...4 screw clamp terminals terminal penjepit sekrup circuit breaker pemutus arus gv2-pemutus litar-terma-magnet pengapit skru litar electric/施耐德电气 gv2-断路器-热磁 螺丝夹端子 断路器 施耐德电气

RS Pro

Screw

O Ring

Surface Mount Resistors

Circular Connectors

Bolts

Panel Mount Indicators 

Electrical Wire 

RS Components ETH SG

Schneider Electric C16S4D Compact New Generation Mccb 4P 160A, Fixed Mount

schneider electric c16s4d compact new generation mccb 4p 160a, fixed mount generasi baru pemasangan tetap molded case circuit breakers mccbs kompak baharu lekapan electric/施耐德电气 紧凑型新一代 160a，固定安装 施耐德电气

schneider-electric-c16s4d-compact-new-generation-mccb-4p-160a-fixed-mount

Schneider Electric C16S4 Compact New Generation Mccb 4P 160A, Fixed Mount

schneider electric c16s4 compact new generation mccb 4p 160a, fixed mount generasi baru pemasangan tetap molded case circuit breakers mccbs kompak baharu lekapan electric/施耐德电气 紧凑型新一代 160a，固定安装 施耐德电气

schneider-electric-c16s4-compact-new-generation-mccb-4p-160a-fixed-mount

SCHNEIDER ELECTRIC Motor Circuit Breaker, Tesys Deca, 3P, 0.63 to 1A, Thermal Magnetic, Screw Clamp Terminals, Rotary Handle GV2P05

 TeSys GV motor circuit breaker, 3 poles (3P), 1A/690V, for 3-phase motor applications 0.25kW@400V. It provides a thermal-magnetic protection with a thermal setting range 0.63-1A, magnetic tripping at 13xIn, high breaking capacity Icu 100kA@400V. Connection by screw clamp terminals. Start-stop control by rotary knob guaranteed for 100 000 cycles AC-3. Multi standards certified (IEC, UL, CSA, CCC, EAC, Marine, ATEX), Green Premium compliant (RoHS/REACh). 

<h3 class="md-block-header-three">SCHNEIDER ELECTRIC Motor Circuit Breaker, Tesys Deca, 3P, 0.63 to 1A, Thermal Magnetic, Screw Clamp Terminals, Rotary Handle GV2P05</h3><ul class="md-block-unordered-list-item"><li> TeSys GV motor circuit breaker, 3 poles (3P), 1A/690V, for 3-phase motor applications 0.25kW@400V. It provides a thermal-magnetic protection with a thermal setting range 0.63-1A, magnetic tripping at 13xIn, high breaking capacity Icu 100kA@400V. Connection by screw clamp terminals. Start-stop control by rotary knob guaranteed for 100 000 cycles AC-3. Multi standards certified (IEC, UL, CSA, CCC, EAC, Marine, ATEX), Green Premium compliant (RoHS/REACh). </li></ul>

<h3>SCHNEIDER ELECTRIC Motor Circuit Breaker, Tesys Deca, 3P, 0.63 to 1A, Thermal Magnetic, Screw Clamp Terminals, Rotary Handle GV2P05</h3>
<ul>
<li>&nbsp;TeSys GV motor circuit breaker, 3 poles (3P), 1A/690V, for 3-phase motor applications 0.25kW@400V. It provides a thermal-magnetic protection with a thermal setting range 0.63-1A, magnetic tripping at 13xIn, high breaking capacity Icu 100kA@400V. Connection by screw clamp terminals. Start-stop control by rotary knob guaranteed for 100 000 cycles AC-3. Multi standards certified (IEC, UL, CSA, CCC, EAC, Marine, ATEX), Green Premium compliant (RoHS/REACh).&nbsp;</li>
</ul>

spec sheet (GV2P05)

Schneider Electric GV2P05 Motor Circuit Breaker, Tesys Deca, 3P, 0.63 to 1A, Thermal Magnetic, Screw Clamp Terminals, Rotary Handle

schneider electric gv2p05 motor circuit breaker, tesys deca, 3p, 0.63 1a, thermal magnetic, screw clamp terminals, rotary handle pemutus sirkuit gv2p05, 0,63 hingga magnetik termal, terminal penjepit sekrup, pegangan putar protection breakers litar magnet terma, pengapit skru, pemegang electric/施耐德电气 电机断路器，tesys deca，3p，0.63 1a，热磁，螺丝夹端子，旋转手柄 施耐德电气

schneider-electric-gv2p05-motor-circuit-breaker-tesys-deca-3p-0-63-to-1a-thermal-magnetic-screw-clamp-terminals-rotary-handle

Schneider Electric C10S3D Compact Mccb 3P 100A, Fixed Mount

schneider electric c10s3d compact mccb 3p 100a, fixed mount pemasangan tetap molded case circuit breakers mccbs lekapan electric/施耐德电气 紧凑型 100a，固定安装 施耐德电气

schneider-electric-c10s3d-compact-mccb-3p-100a-fixed-mount

Schneider Electric C25S3 Compact Mccb 3P 250A, Fixed Mount

schneider electric c25s3 compact mccb 3p 250a, fixed mount pemasangan tetap molded case circuit breakers mccbs lekapan electric/施耐德电气 紧凑型 250a，固定安装 施耐德电气

schneider-electric-c25s3-compact-mccb-3p-250a-fixed-mount

MRO RT18-32X series fuse support device applicable to AC 50Hz, rated insulation voltage to 690V and conventional heating current to 32a, mainly used in the electric circuit as size 10 * 38 pieces of the support of the fuse body categories (gG.AM.AR, etc.). The series fuse support pieces can heat the heating current and the expected short circuit impulse current to the 100KA dynamic thermal stability, and the function of the isolated power supply after the multi-phase combination.

Delivery can be expedited with      additional freight cost

Stock availability/ Actual      order lead time will be rechecked once confirm order

We do not accept returns or      exchanges due to Indent item unless product quality issue

Picture shown is for      illustration purposes only, actual product may differ

This image is representative of      the product range, actual product may differ

Product may vary slightly from      image representation

Due to Covid-19 pandemic and      worldwide material shortage, temporary delay in delivery may occur;      therefore, the delivery date (mention above) is non-binding

MRO RT18-32X series fuse support device applicable to AC 50Hz, rated insulation voltage to 690V and conventional heating current to 32a, mainly used in the electric circuit as size 10 * 38 pieces of the support of the fuse body categories (gG.AM.AR, etc.). The series fuse support pieces can heat the heating current and the expected short circuit impulse current to the 100KA dynamic thermal stability, and the function of the isolated power supply after the multi-phase combination.Note: <ol class="md-block-ordered-list-item"><li>Delivery can be expedited with additional freight cost</li><li>Stock availability/ Actual order lead time will be rechecked once confirm order</li><li>We do not accept returns or exchanges due to Indent item unless product quality issue</li><li>Picture shown is for illustration purposes only, actual product may differ</li><li>This image is representative of the product range, actual product may differ</li><li>Product may vary slightly from image representation</li><li>Due to Covid-19 pandemic and worldwide material shortage, temporary delay in delivery may occur; therefore, the delivery date (mention above) is non-binding</li></ol>

&nbsp;&nbsp;
MRO RT18-32X series fuse support device applicable to AC 50Hz, rated insulation voltage to 690V and conventional heating current to 32a, mainly used in the electric circuit as size 10 * 38 pieces of the support of the fuse body categories (gG.AM.AR, etc.). The series fuse support pieces can heat the heating current and the expected short circuit impulse current to the 100KA dynamic thermal stability, and the function of the isolated power supply after the multi-phase combination.
Note: 
<ol>
<li>Delivery can be expedited with additional freight cost</li>
<li>Stock availability/ Actual order lead time will be rechecked once confirm order</li>
<li>We do not accept returns or exchanges due to Indent item unless product quality issue</li>
<li>Picture shown is for illustration purposes only, actual product may differ</li>
<li>This image is representative of the product range, actual product may differ</li>
<li>Product may vary slightly from image representation</li>
<li>Due to Covid-19 pandemic and worldwide material shortage, temporary delay in delivery may occur; therefore, the delivery date (mention above) is non-binding</li>
</ol>

Mro RT18-32X/3P Three Mingrong Fuse Base Fuse Holder 10*38 RT18-32

mro rt18-32x/3p three mingrong fuse base holder 10*38 rt18-32 tiga fuses fusegear sekring pemegang fius asas alat mro/维修保养 三联明荣保险丝底座保险丝座10*38 保险丝和保险丝 维护、维修和运行 (mro)