FLUKE

HIOKI

RS Pro

SCHNEIDER ELECTRIC

Telemecanique

TRIPLETT

Test & Measurement

test-measurement

Clamp Meters

clamp-meters

Electrical Power Testing

electrical-power-testing

Electricals

electricals

Safety Relays

safety-relays

Matthew Lee

buyerIntroduction

Triplett CM24 400A Trms AC/DC Mini Clamp With Inrush

triplett cm24 400a trms ac/dc mini clamp inrush dengan meters triplett/三胞胎 真有效值交流/直流迷你钳形表（带浪涌电流） 三胞胎

triplett-cm24-400a-trms-ac-dc-mini-clamp-with-inrush

Triplett CM1050 1000A True Rms AC/DC Clamp Meter

 The Triplett Model CM1050 True RMS Clampmeter can measure AC and DC current up to 1000A without breaking the circuit by clamping around a single conductor. This saves time and the circuit will not be damaged. True RMS provides better accuracy when measuring non-sinusoidal or noisy waveforms. Additional measurements include Resistance, Capacitance, Frequency, Temperature, Diode Test, and Continuity. Measurements can read on the 6000 count backlit LCD. It has an Inrush current function that captures the instantaneous surge (inrush) current when power equipment is turned on. Features include: Lo Z (impedance) mode for identifying ghost voltages, Low Pass FIlter (LPF) for filtering frequency and harmonic interference when measuring variable frequency drives, Peak voltage capture with min/max, NCV Detector with LED, Relative/DC zero function, Auto power off, and a built-in flashlight. Data Hold freezes the display for easy viewing. CAT IV-600V safety category. cETLus listed. Includes 3 AAA batteries, test leads, Type K thermocouple probe, and carrying case.  

True RMS provides better accuracy when measuring non-sinusoidal or noisy waveforms

Captures the instantaneous surge (inrush) current when power equipment is turned on

Built-in Non-Contact Voltage Detector with LED

Low Pass Filter (LPF) for filtering frequency and harmonic interference when measuring variable frequency drives

Lo Z (impedance) mode for identifying ghost voltages

Data Hold freezes the display and Relative Mode for making comparisons to a stored reference value and DC Zero

Includes test leads, Type K thermocouple bead probe, 3 AAA batteries, and carrying case

<h3 class="md-block-header-three"><strong class="md-inline-bold">Triplett CM1050 1000A True Rms AC/DC Clamp Meter</strong></h3><p class="md-block-unstyled"> The Triplett Model CM1050 True RMS Clampmeter can measure AC and DC current up to 1000A without breaking the circuit by clamping around a single conductor. This saves time and the circuit will not be damaged. True RMS provides better accuracy when measuring non-sinusoidal or noisy waveforms. Additional measurements include Resistance, Capacitance, Frequency, Temperature, Diode Test, and Continuity. Measurements can read on the 6000 count backlit LCD. It has an Inrush current function that captures the instantaneous surge (inrush) current when power equipment is turned on. Features include: Lo Z (impedance) mode for identifying ghost voltages, Low Pass FIlter (LPF) for filtering frequency and harmonic interference when measuring variable frequency drives, Peak voltage capture with min/max, NCV Detector with LED, Relative/DC zero function, Auto power off, and a built-in flashlight. Data Hold freezes the display for easy viewing. CAT IV-600V safety category. cETLus listed. Includes 3 AAA batteries, test leads, Type K thermocouple probe, and carrying case.  </p><ul class="md-block-unordered-list-item"><li>True RMS provides better accuracy when measuring non-sinusoidal or noisy waveforms</li><li>Captures the instantaneous surge (inrush) current when power equipment is turned on</li><li>1.4″ (35mm) clamp jaw</li><li>Built-in Non-Contact Voltage Detector with LED</li><li>Low Pass Filter (LPF) for filtering frequency and harmonic interference when measuring variable frequency drives</li><li>Lo Z (impedance) mode for identifying ghost voltages</li><li>Peak voltage measurement with Min/Max</li><li>Data Hold freezes the display and Relative Mode for making comparisons to a stored reference value and DC Zero</li><li>Auto power off with disable</li><li>Built-in Flashlight</li><li>cETLus listed</li><li>Includes test leads, Type K thermocouple bead probe, 3 AAA batteries, and carrying case</li></ul>

<h3><strong>Triplett CM1050 1000A True Rms AC/DC Clamp Meter</strong></h3>
<p>&nbsp;The Triplett Model CM1050 True RMS Clampmeter can measure AC and DC current up to 1000A without breaking the circuit by clamping around a single conductor. This saves time and the circuit will not be damaged. True RMS provides better accuracy when measuring non-sinusoidal or noisy waveforms. Additional measurements include Resistance, Capacitance, Frequency, Temperature, Diode Test, and Continuity. Measurements can read on the 6000 count backlit LCD. It has an Inrush current function that captures the instantaneous surge (inrush) current when power equipment is turned on. Features include: Lo Z (impedance) mode for identifying ghost voltages, Low Pass FIlter (LPF) for filtering frequency and harmonic interference when measuring variable frequency drives, Peak voltage capture with min/max, NCV Detector with LED, Relative/DC zero function, Auto power off, and a built-in flashlight. Data Hold freezes the display for easy viewing. CAT IV-600V safety category. cETLus listed. Includes 3 AAA batteries, test leads, Type K thermocouple probe, and carrying case.&nbsp;&nbsp;</p>
<ul>
<li>True RMS provides better accuracy when measuring non-sinusoidal or noisy waveforms</li>
<li>Captures the instantaneous surge (inrush) current when power equipment is turned on</li>
<li>1.4″ (35mm) clamp jaw</li>
<li>Built-in Non-Contact Voltage Detector with LED</li>
<li>Low Pass Filter (LPF) for filtering frequency and harmonic interference when measuring variable frequency drives</li>
<li>Lo Z (impedance) mode for identifying ghost voltages</li>
<li>Peak voltage measurement with Min/Max</li>
<li>Data Hold freezes the display and Relative Mode for making comparisons to a stored reference value and DC Zero</li>
<li>Auto power off with disable</li>
<li>Built-in Flashlight</li>
<li>cETLus listed</li>
<li>Includes test leads, Type K thermocouple bead probe, 3 AAA batteries, and carrying case</li>
</ul>


Extech

ACISION

Center

PCE Instruments

MEGGER

AMPROBE

Fluke Networks

Multimeters

Other Measuring Tools

Industrial Thermometer

Sound & Vibration Meters

Thermal Imaging Cameras

Humidity & Temperature

Multimeter Leads

CETM

triplett cm1050 1000a true rms ac/dc clamp meter meteran klem sejati meters triplett/三胞胎 真有效值交流/直流钳形表 三胞胎

triplett-cm1050-1000a-true-rms-ac-dc-clamp-meter

 The Fluke 376 FC True-rms Clamp Meter with iFlex is the most advanced troubleshooting tool for industrial and commercial electricians. The 376 is part of the Fluke Connect family of wireless test tools that enable you to log, trend and monitor measurements while remaining safely away from the arc flash zone through Bluetooth connectivity.

The 376 FC clamp meter uses an integrated low-pass filter for accurate measurements of non-linear signals, such as adjustable speed drives, electronic ballasts and other non-linear loads. The clamp also uses proprietary inrush measurement technology to filter out noise and capture motor starting current exactly as the circuit protection sees it.

Resistance to 60 kΩ with continuity detection

Min, max, average, and inrush recording to capture variations automatically

500 mV DC measurement range to interface with other accessories

The 376 FC clamp carries a CAT III 1000 V, CAT IV 600 V safety rating, designed to offer you the highest possible protection in a test tool.

The included iFlex flexible current probe provides easier access to large conductors in tight spaces. The flexible probe:

Expands the measurement range to 2500 A AC

Allows frequency measurement to 500 Hz with body jaw and iFlex

<p class="md-block-unstyled"> <strong class="md-inline-bold">Fluke 376 FC True-RMS Clamp Meter</strong></p><p class="md-block-unstyled"> The Fluke 376 FC True-rms Clamp Meter with iFlex is the most advanced troubleshooting tool for industrial and commercial electricians. The 376 is part of the Fluke Connect family of wireless test tools that enable you to log, trend and monitor measurements while remaining safely away from the arc flash zone through Bluetooth connectivity.</p><h3 class="md-block-header-three">Find the cause of difficult problems</h3><p class="md-block-unstyled">The 376 FC clamp meter uses an integrated low-pass filter for accurate measurements of non-linear signals, such as adjustable speed drives, electronic ballasts and other non-linear loads. The clamp also uses proprietary inrush measurement technology to filter out noise and capture motor starting current exactly as the circuit protection sees it.</p><p class="md-block-unstyled">Measure:</p><ul class="md-block-unordered-list-item"><li>Voltage to 1000 V AC or DC</li><li>Resistance to 60 kΩ with continuity detection</li><li>Min, max, average, and inrush recording to capture variations automatically</li><li>500 mV DC measurement range to interface with other accessories</li><li>1000 μF capacitance measurement</li></ul><h3 class="md-block-header-three">Work safely and conveniently</h3><p class="md-block-unstyled">The 376 FC clamp carries a CAT III 1000 V, CAT IV 600 V safety rating, designed to offer you the highest possible protection in a test tool.</p><p class="md-block-unstyled">The included iFlex flexible current probe provides easier access to large conductors in tight spaces. The flexible probe:</p><ul class="md-block-unordered-list-item"><li>Expands the measurement range to 2500 A AC</li><li>Allows frequency measurement to 500 Hz with body jaw and iFlex</li></ul>

<p>&nbsp;<strong>Fluke 376 FC True-RMS Clamp Meter</strong></p>
<p>&nbsp;The Fluke 376 FC True-rms Clamp Meter with iFlex is the most advanced troubleshooting tool for industrial and commercial electricians. The 376 is part of the Fluke Connect family of wireless test tools that enable you to log, trend and monitor measurements while remaining safely away from the arc flash zone through Bluetooth connectivity.</p>
<h3>Find the cause of difficult problems</h3>
<p>The 376 FC clamp meter uses an integrated low-pass filter for accurate measurements of non-linear signals, such as adjustable speed drives, electronic ballasts and other non-linear loads. The clamp also uses proprietary inrush measurement technology to filter out noise and capture motor starting current exactly as the circuit protection sees it.</p>
<p>Measure:</p>
<ul>
<li>Voltage to 1000 V AC or DC</li>
<li>Resistance to 60 kΩ with continuity detection</li>
<li>Min, max, average, and inrush recording to capture variations automatically</li>
<li>500 mV DC measurement range to interface with other accessories</li>
<li>1000 μF capacitance measurement</li>
</ul>
<h3>Work safely and conveniently</h3>
<p>The 376 FC clamp carries a CAT III 1000 V, CAT IV 600 V safety rating, designed to offer you the highest possible protection in a test tool.</p>
<p>The included iFlex flexible current probe provides easier access to large conductors in tight spaces. The flexible probe:</p>
<ul>
<li>Expands the measurement range to 2500 A AC</li>
<li>Allows frequency measurement to 500 Hz with body jaw and iFlex</li>
</ul>


Fluke 376 FC Datasheet

Flossie Chua

KYORITSU

PRO'SKIT

SANWA METER

Others

RAACO

CHIAYO

SHOW

Microphone

Tools Organizers

Soldering & Brazing Equipment

Motor Rotation & Phase

Toolboxes

Multiple Tools Sets

Ming Yang

Fluke 376 FC True-RMS Clamp Meter With Iflex for Industrial/Commercial Electricians, Vfd Low Pass Filter for Accurate Measurements, Inrush Measurements, Bluetooth Connectivity for Remote Measurements

fluke 376 fc true-rms clamp meter iflex industrial/commercial electricians, vfd low pass filter accurate measurements, inrush bluetooth connectivity remote measurements dengan untuk teknisi listrik industri/komersial, pengukuran akurat, inrush, konektivitas jarak jauh electrical power testing pengujian daya pengapit juruelektrik penapis lulus rendah tepat, kesambungan ujian tenaga elektrik fluke/福禄克 真有效值钳形表，带有适用于工业/商业电工的 iflex，用于精确测量的 低通滤波器，浪涌测量，用于远程测量的蓝牙连接 电力测试 福禄克

fluke-376-fc-true-rms-clamp-meter-with-iflex-for-industrial-commercial-electricians-vfd-low-pass-filter-for-accurate-measurements-inrush-measurements-bluetooth-connectivity-for-remote-measurements

 The Fluke 374 True RMS Clamp Meter can read up to 600 V and 600 A in both AC and DC modes. Additionally, the 374 is compatible with the new iFlex flexible current probe (sold separately), which increases the measurement range to 2500 A AC and provides increased display flexibility, and improved wire access.  

iFlex flexible current probe (sold separately) expands the measurement range to 2500 A AC while providing increased display flexibility, ability to measure awkward sized conductors and improved wire access

Propietary inrush measurement technology to filter out noise and capture motor starting current exactly as the circuit protection sees it

Ergonomic design fits in your hand and can be used while wearing personal protective equipment

Large, easy to read backlight display automatically sets the correct measurement range so you do not need to change the switch positions while taking a measurement

<h3 class="md-block-header-three"><strong class="md-inline-bold">Fluke 374 True Rms AC/DC Clamp Meter</strong></h3><p class="md-block-unstyled"> The Fluke 374 True RMS Clamp Meter can read up to 600 V and 600 A in both AC and DC modes. Additionally, the 374 is compatible with the new iFlex flexible current probe (sold separately), which increases the measurement range to 2500 A AC and provides increased display flexibility, and improved wire access.  </p><ul class="md-block-unordered-list-item"><li>iFlex flexible current probe (sold separately) expands the measurement range to 2500 A AC while providing increased display flexibility, ability to measure awkward sized conductors and improved wire access</li><li>CAT IV 600 V, CAT III 1000 V</li><li>Propietary inrush measurement technology to filter out noise and capture motor starting current exactly as the circuit protection sees it</li><li>Ergonomic design fits in your hand and can be used while wearing personal protective equipment</li><li>Large, easy to read backlight display automatically sets the correct measurement range so you do not need to change the switch positions while taking a measurement</li></ul>

<h3><strong>Fluke 374 True Rms AC/DC Clamp Meter</strong></h3>
<p>&nbsp;The Fluke 374 True RMS Clamp Meter can read up to 600 V and 600 A in both AC and DC modes. Additionally, the 374 is compatible with the new iFlex flexible current probe (sold separately), which increases the measurement range to 2500 A AC and provides increased display flexibility, and improved wire access.&nbsp;&nbsp;</p>
<ul>
<li>iFlex flexible current probe (sold separately) expands the measurement range to 2500 A AC while providing increased display flexibility, ability to measure awkward sized conductors and improved wire access</li>
<li>CAT IV 600 V, CAT III 1000 V</li>
<li>Propietary inrush measurement technology to filter out noise and capture motor starting current exactly as the circuit protection sees it</li>
<li>Ergonomic design fits in your hand and can be used while wearing personal protective equipment</li>
<li>Large, easy to read backlight display automatically sets the correct measurement range so you do not need to change the switch positions while taking a measurement</li>
</ul>


Fluke 374 True Rms AC/DC Clamp Meter

fluke 374 true rms ac/dc clamp meter meteran klem meters fluke/福禄克 真有效值交流/直流钳形表 福禄克

fluke-374-true-rms-ac-dc-clamp-meter

Hioki True RMS 2000 A AC/DC Clamp Meter CM4373

Hioki clamp meters are best-in-class measuring devices incorporating Hioki’s expertise in current sensing technology. The CM4373 is a 2000A True RMS clamp meter that features stronger jaws, broader -25℃ to 65℃ operating temperature range and IP54 dustproof and waterproof enclosure to enable professionals to work quickly in tough situations including the development, repair, and maintenance of equipment and devices such as electric vehicles. Additionally, the high-voltage DC measurement capability of up to 1700 V (*1) is ideal for the clamp maintenance inspections of electrical and solar power equipment.

• Automatic AC/DC function helps boost work efficiency 

• Measure DC voltages of up to 1700 V (*1) 

• Simultaneously measure inrush current in RMS and crest values 

• Expanded -25 °C to 65 °C operating temperature range 

• IP54 dustproof and waterproof enclosure *Jaws (current sensor portion): IP50


DC Current range: 600.0 A/2000 A, Basic accuracy: ±1.3% rdg. ±0.3 A (600 A range)

AC Current range: 600.0 A/2000 A (10 Hz to 1 kHz, True RMS), Basic accuracy: ±1.3% rdg. ±0.3 A (at 600 A)

Crest factor: 600.0 A range: 3 or less,
2000 A range: 2.84 or less

DC+AC Current range: 600.0 A/2000 A (10 Hz to 1 kHz, True RMS), Basic accuracy DC, 45-66 Hz: ±1.3% rdg. ±1.3 A (at 600 A)

DC Voltage range: 600.0 mV to 1500 V (*1), 5 ranges, Basic accuracy: ±0.5% rdg. ±0.5 mV (at 600 mV)

AC Voltage range: 6.000 V to 1000 V, 4 ranges (15 Hz to 1 kHz, True RMS), Basic accuracy 45 - 66 Hz: ±0.9% rdg. ±0.013 V (at 6 V)

DC+AC Voltage range: 6.000 V to 1000 V, 4 ranges, Basic accuracy DC, 45 - 66 Hz: ±1.0% rdg. ±0.023 V (at 6 V)

Resistance range: 600.0 Ω to 600.0 kΩ, 4 ranges, Basic accuracy: ±0.7% rdg. ±0.5 Ω (at 600 Ω)

Capacitance range: 1.000 μF to 1000 μF, 4 ranges, Basic accuracy: ±1.9% rdg. ±0.005 μF (at 1 μF)

Frequency range: 9.999 Hz to 999.9 Hz, 3 ranges, Basic accuracy: ±0.1% rdg. ±0.003 Hz (at 9.999 Hz)

Temperature (K): -40.0 to 400.0 ˚C, add temperature probe accuracy to basic accuracy of ±0.5% rdg. ±3.0 ˚C

Voltage detection: Hi: 40 V to 600 V AC, Lo: 80 V to 600 V AC, 50/60 Hz

Other functions: Automatic AC/DC detection, Plus/Minus judgement function of DC A, DC V, Max/Min/Average/PEAK MAX/ PEAK MIN value display, Filter function, Display value hold, Auto hold, Back light, Auto-power save, Buzzer sounds, Zero-adjustment

Dustproof, waterproof: Grip: IP54 (when measuring an insulated conductor only), Jaw (the current sensor portion of the instrument)/ barrier: IP50 *Risk of electric shock from the conductor being measured increases when wet.

Power supply: LR03 Alkaline battery ×2, Continuous use 45 hr (Backlight OFF)

Core jaw diameter: φ55 mm (2.17 in), Jaw dimension: 92 mm (3.62 in) W×18 mm (0.71 in) D

Dimensions and mass: 65 mm (2.56 in) W×250 mm (9.84 in) H×35 mm (1.38 in) D mm, 530 g (18.7 oz)

<p class="md-block-unstyled"><strong class="md-inline-bold">Hioki True RMS 2000 A AC/DC Clamp Meter CM4373</strong></p><p class="md-block-unstyled">Hioki clamp meters are best-in-class measuring devices incorporating Hioki’s expertise in current sensing technology. The CM4373 is a 2000A True RMS clamp meter that features stronger jaws, broader -25℃ to 65℃ operating temperature range and IP54 dustproof and waterproof enclosure to enable professionals to work quickly in tough situations including the development, repair, and maintenance of equipment and devices such as electric vehicles. Additionally, the high-voltage DC measurement capability of up to 1700 V (*1) is ideal for the clamp maintenance inspections of electrical and solar power equipment.</p><p class="md-block-unstyled">CAT IV 600 V, CAT III 1000 V </p><p class="md-block-unstyled"><strong class="md-inline-bold">Key Features</strong> </p><p class="md-block-unstyled">• Multiple measurement functions </p><p class="md-block-unstyled">• Automatic AC/DC function helps boost work efficiency </p><p class="md-block-unstyled">• Measure DC voltages of up to 1700 V (*1) </p><p class="md-block-unstyled">• Simultaneously measure inrush current in RMS and crest values </p><p class="md-block-unstyled">• Expanded -25 °C to 65 °C operating temperature range </p><p class="md-block-unstyled">• IP54 dustproof and waterproof enclosure *Jaws (current sensor portion): IP50<br/></p><p class="md-block-unstyled"><strong class="md-inline-bold">DC Current range: </strong>600.0 A/2000 A, Basic accuracy: ±1.3% rdg. ±0.3 A (600 A range)</p><p class="md-block-unstyled"><strong class="md-inline-bold">AC Current range: </strong>600.0 A/2000 A (10 Hz to 1 kHz, True RMS), Basic accuracy: ±1.3% rdg. ±0.3 A (at 600 A)</p><p class="md-block-unstyled"><strong class="md-inline-bold">Crest factor: </strong>600.0 A range: 3 or less,<br/>2000 A range: 2.84 or less</p><p class="md-block-unstyled"><strong class="md-inline-bold">DC+AC Current range: </strong>600.0 A/2000 A (10 Hz to 1 kHz, True RMS), Basic accuracy DC, 45-66 Hz: ±1.3% rdg. ±1.3 A (at 600 A)</p><p class="md-block-unstyled"><strong class="md-inline-bold">DC Voltage range: </strong>600.0 mV to 1500 V (*1), 5 ranges, Basic accuracy: ±0.5% rdg. ±0.5 mV (at 600 mV)</p><p class="md-block-unstyled"><strong class="md-inline-bold">AC Voltage range: </strong>6.000 V to 1000 V, 4 ranges (15 Hz to 1 kHz, True RMS), Basic accuracy 45 - 66 Hz: ±0.9% rdg. ±0.013 V (at 6 V)</p><p class="md-block-unstyled"><strong class="md-inline-bold">DC+AC Voltage range: </strong>6.000 V to 1000 V, 4 ranges, Basic accuracy DC, 45 - 66 Hz: ±1.0% rdg. ±0.023 V (at 6 V)</p><p class="md-block-unstyled"><strong class="md-inline-bold">Resistance range: </strong>600.0 Ω to 600.0 kΩ, 4 ranges, Basic accuracy: ±0.7% rdg. ±0.5 Ω (at 600 Ω)</p><p class="md-block-unstyled"><strong class="md-inline-bold">Capacitance range: </strong>1.000 μF to 1000 μF, 4 ranges, Basic accuracy: ±1.9% rdg. ±0.005 μF (at 1 μF)</p><p class="md-block-unstyled"><strong class="md-inline-bold">Frequency range: </strong>9.999 Hz to 999.9 Hz, 3 ranges, Basic accuracy: ±0.1% rdg. ±0.003 Hz (at 9.999 Hz)</p><p class="md-block-unstyled"><strong class="md-inline-bold">Temperature (K): </strong>-40.0 to 400.0 ˚C, add temperature probe accuracy to basic accuracy of ±0.5% rdg. ±3.0 ˚C</p><p class="md-block-unstyled"><strong class="md-inline-bold">Voltage detection: </strong>Hi: 40 V to 600 V AC, Lo: 80 V to 600 V AC, 50/60 Hz</p><p class="md-block-unstyled"><strong class="md-inline-bold">Other functions: </strong>Automatic AC/DC detection, Plus/Minus judgement function of DC A, DC V, Max/Min/Average/PEAK MAX/ PEAK MIN value display, Filter function, Display value hold, Auto hold, Back light, Auto-power save, Buzzer sounds, Zero-adjustment</p><p class="md-block-unstyled"><strong class="md-inline-bold">Dustproof, waterproof: </strong>Grip: IP54 (when measuring an insulated conductor only), Jaw (the current sensor portion of the instrument)/ barrier: IP50 *Risk of electric shock from the conductor being measured increases when wet.</p><p class="md-block-unstyled"><strong class="md-inline-bold">Power supply: </strong>LR03 Alkaline battery ×2, Continuous use 45 hr (Backlight OFF)</p><p class="md-block-unstyled"><strong class="md-inline-bold">Core jaw diameter: </strong>φ55 mm (2.17 in), Jaw dimension: 92 mm (3.62 in) W×18 mm (0.71 in) D</p><p class="md-block-unstyled"><strong class="md-inline-bold">Dimensions and mass: </strong>65 mm (2.56 in) W×250 mm (9.84 in) H×35 mm (1.38 in) D mm, 530 g (18.7 oz)</p>

<p><strong>Hioki True RMS 2000 A AC/DC Clamp Meter CM4373</strong></p>
<p>Hioki clamp meters are best-in-class measuring devices incorporating Hioki’s expertise in current sensing technology. The CM4373 is a 2000A True RMS clamp meter that features stronger jaws, broader -25℃ to 65℃ operating temperature range and IP54 dustproof and waterproof enclosure to enable professionals to work quickly in tough situations including the development, repair, and maintenance of equipment and devices such as electric vehicles. Additionally, the high-voltage DC measurement capability of up to 1700 V (*1) is ideal for the clamp maintenance inspections of electrical and solar power equipment.</p>
<p>CAT IV 600 V, CAT III 1000 V&nbsp;</p>
<p><strong>Key Features</strong>&nbsp;</p>
<p>• Multiple measurement functions&nbsp;</p>
<p>• Automatic AC/DC function helps boost work efficiency&nbsp;</p>
<p>• Measure DC voltages of up to 1700 V (*1)&nbsp;</p>
<p>• Simultaneously measure inrush current in RMS and crest values&nbsp;</p>
<p>• Expanded -25 °C to 65 °C operating temperature range&nbsp;</p>
<p>• IP54 dustproof and waterproof enclosure *Jaws (current sensor portion): IP50<br>
</p>
<p><strong>DC Current range: </strong>600.0 A/2000 A, Basic accuracy: ±1.3% rdg. ±0.3 A (600 A range)</p>
<p><strong>AC Current range: </strong>600.0 A/2000 A (10 Hz to 1 kHz, True RMS), Basic accuracy: ±1.3% rdg. ±0.3 A (at 600 A)</p>
<p><strong>Crest factor: </strong>600.0 A range: 3 or less,<br>
2000 A range: 2.84 or less</p>
<p><strong>DC+AC Current range: </strong>600.0 A/2000 A (10 Hz to 1 kHz, True RMS), Basic accuracy DC, 45-66 Hz: ±1.3% rdg. ±1.3 A (at 600 A)</p>
<p><strong>DC Voltage range: </strong>600.0 mV to 1500 V (*1), 5 ranges, Basic accuracy: ±0.5% rdg. ±0.5 mV (at 600 mV)</p>
<p><strong>AC Voltage range: </strong>6.000 V to 1000 V, 4 ranges (15 Hz to 1 kHz, True RMS), Basic accuracy 45 - 66 Hz: ±0.9% rdg. ±0.013 V (at 6 V)</p>
<p><strong>DC+AC Voltage range: </strong>6.000 V to 1000 V, 4 ranges, Basic accuracy DC, 45 - 66 Hz: ±1.0% rdg. ±0.023 V (at 6 V)</p>
<p><strong>Resistance range: </strong>600.0 Ω to 600.0 kΩ, 4 ranges, Basic accuracy: ±0.7% rdg. ±0.5 Ω (at 600 Ω)</p>
<p><strong>Capacitance range: </strong>1.000 μF to 1000 μF, 4 ranges, Basic accuracy: ±1.9% rdg. ±0.005 μF (at 1 μF)</p>
<p><strong>Frequency range: </strong>9.999 Hz to 999.9 Hz, 3 ranges, Basic accuracy: ±0.1% rdg. ±0.003 Hz (at 9.999 Hz)</p>
<p><strong>Temperature (K): </strong>-40.0 to 400.0 ˚C, add temperature probe accuracy to basic accuracy of ±0.5% rdg. ±3.0 ˚C</p>
<p><strong>Voltage detection: </strong>Hi: 40 V to 600 V AC, Lo: 80 V to 600 V AC, 50/60 Hz</p>
<p><strong>Other functions: </strong>Automatic AC/DC detection, Plus/Minus judgement function of DC A, DC V, Max/Min/Average/PEAK MAX/ PEAK MIN value display, Filter function, Display value hold, Auto hold, Back light, Auto-power save, Buzzer sounds, Zero-adjustment</p>
<p><strong>Dustproof, waterproof: </strong>Grip: IP54 (when measuring an insulated conductor only), Jaw (the current sensor portion of the instrument)/ barrier: IP50 *Risk of electric shock from the conductor being measured increases when wet.</p>
<p><strong>Power supply: </strong>LR03 Alkaline battery ×2, Continuous use 45 hr (Backlight OFF)</p>
<p><strong>Core jaw diameter: </strong>φ55 mm (2.17 in), Jaw dimension: 92 mm (3.62 in) W×18 mm (0.71 in) D</p>
<p><strong>Dimensions and mass: </strong>65 mm (2.56 in) W×250 mm (9.84 in) H×35 mm (1.38 in) D mm, 530 g (18.7 oz)</p>


Data Sheet

DC Voltage

AC Voltage

Resistance

C (capacitance)

Frequency

Continuity check

Diode test

Voltage detection

Other functions

Display

Display refresh rates

Power supply

Dimensions and mass

SEEK THERMAL

Light Meters & Imaging

Lester

Hioki True Rms 2000 a Ac/dc Clamp Meter CM4373-50

hioki true rms 2000 ac/dc clamp meter cm4373-50 electrical power testing pengujian daya listrik ujian tenaga elektrik hioki/日木 交流/直流钳形表 电力测试 日木

hioki-true-rms-2000-a-ac-dc-clamp-meter-cm4373-50

● Advanced clamp meter that transmits measurements to your smartphone via Fluke Connect® for viewing at a safer distance

● Performs AC and DC measurements to 600 A, and AC and DC voltage measurements to 1000 V

● Measures AC to 2500 A AC with optional iFlex flexible current probe

● Measures resistance to 6000 Ω with continuity detection

Product overview: Fluke 374 FC True-RMS AC/DC Clamp Meter

Fluke 374 FC delivers advanced troubleshooting performance and wireless connectivity

The Fluke 374 FC, part of the Fluke Connect family of wireless test tools, delivers the standard features you need for everyday troubleshooting. Measure AC and DC current to 600 A with the fixed jaw clamp or add an optional iFlex® flexible current probe to measure all the way to 2500 A. The large diameter and flexible design of the iFlex probe make it easier to measure around large conductors in tight spaces or to access tightly packed wires. You can also use the 374 FC to measure AC and DC voltage to 1000 V and resistance to 6000 Ω.

The 374 FC is Fluke Connect-enabled to wirelessly transmit results via Bluetooth to Apple and Android devices. That means you can read the results out of the arc flash zone, wearing less PPE. You can even save results to the cloud and create and send reports in email right from the field. Or converse in real-time with ShareLive™ video calls.

With True-RMS AC voltage and current measurements, the 374 FC enables you to accurately troubleshoot non-linear signals. And you can log and trend measurements to pinpoint intermittent while you are performing other tasks. The Fluke 374 FC Clamp Meter is the direct replacement for the Fluke 374 Clamp Meter.

● Compatible with optional TPAK magnetic hanging strap

● Comes with soft carrying case, batteries, and three-year warranty

● Features CAT III 1000 V, CAT IV 600 V safety rating

● Provides True-RMS voltage and current measurements to accurately measure non-linear signals

● Includes Min/Max/Avg and inrush recording to capture variations automatically

<h3 class="md-block-header-three"><strong class="md-inline-bold">Fluke 374 Fc True-RMS AC/DC Clamp Meter</strong></h3><p class="md-block-unstyled">Key Features:</p><h4 class="md-block-header-four">● Advanced clamp meter that transmits measurements to your smartphone via Fluke Connect® for viewing at a safer distance</h4><h4 class="md-block-header-four">● Performs AC and DC measurements to 600 A, and AC and DC voltage measurements to 1000 V</h4><h4 class="md-block-header-four">● Measures AC to 2500 A AC with optional iFlex flexible current probe</h4><h4 class="md-block-header-four">● Measures resistance to 6000 Ω with continuity detection</h4><h4 class="md-block-header-four"></h4><h4 class="md-block-header-four">Product overview: Fluke 374 FC True-RMS AC/DC Clamp Meter</h4><h4 class="md-block-header-four">Fluke 374 FC delivers advanced troubleshooting performance and wireless connectivity</h4><h4 class="md-block-header-four"></h4><h4 class="md-block-header-four">The Fluke 374 FC, part of the Fluke Connect family of wireless test tools, delivers the standard features you need for everyday troubleshooting. Measure AC and DC current to 600 A with the fixed jaw clamp or add an optional iFlex® flexible current probe to measure all the way to 2500 A. The large diameter and flexible design of the iFlex probe make it easier to measure around large conductors in tight spaces or to access tightly packed wires. You can also use the 374 FC to measure AC and DC voltage to 1000 V and resistance to 6000 Ω.</h4><h4 class="md-block-header-four"></h4><h4 class="md-block-header-four">The 374 FC is Fluke Connect-enabled to wirelessly transmit results via Bluetooth to Apple and Android devices. That means you can read the results out of the arc flash zone, wearing less PPE. You can even save results to the cloud and create and send reports in email right from the field. Or converse in real-time with ShareLive™ video calls.</h4><h4 class="md-block-header-four"></h4><h4 class="md-block-header-four">Versatile feature set</h4><h4 class="md-block-header-four"></h4><h4 class="md-block-header-four">With True-RMS AC voltage and current measurements, the 374 FC enables you to accurately troubleshoot non-linear signals. And you can log and trend measurements to pinpoint intermittent while you are performing other tasks. The Fluke 374 FC Clamp Meter is the direct replacement for the Fluke 374 Clamp Meter.</h4><h4 class="md-block-header-four"></h4><h4 class="md-block-header-four">Other useful capabilities:</h4><h4 class="md-block-header-four">● Compatible with optional TPAK magnetic hanging strap</h4><h4 class="md-block-header-four">● Comes with soft carrying case, batteries, and three-year warranty</h4><h4 class="md-block-header-four">● Measures capacitance to 1000 µF</h4><h4 class="md-block-header-four">● Features CAT III 1000 V, CAT IV 600 V safety rating</h4><h4 class="md-block-header-four">● Provides True-RMS voltage and current measurements to accurately measure non-linear signals</h4><h4 class="md-block-header-four">● Includes Min/Max/Avg and inrush recording to capture variations automatically</h4><h4 class="md-block-header-four">● Runs on two AA alkaline batteries</h4><p class="md-block-unstyled"><br/></p>

<h3><strong>Fluke 374 Fc True-RMS AC/DC Clamp Meter</strong></h3>
<p>Key Features:</p>
<h4>● Advanced clamp meter that transmits measurements to your smartphone via Fluke Connect® for viewing at a safer distance</h4>
<h4>● Performs AC and DC measurements to 600 A, and AC and DC voltage measurements to 1000 V</h4>
<h4>● Measures AC to 2500 A AC with optional iFlex flexible current probe</h4>
<h4>● Measures resistance to 6000 Ω with continuity detection</h4>
<h4></h4>
<h4>Product overview: Fluke 374 FC True-RMS AC/DC Clamp Meter</h4>
<h4>Fluke 374 FC delivers advanced troubleshooting performance and wireless connectivity</h4>
<h4></h4>
<h4>The Fluke 374 FC, part of the Fluke Connect family of wireless test tools, delivers the standard features you need for everyday troubleshooting. Measure AC and DC current to 600 A with the fixed jaw clamp or add an optional iFlex® flexible current probe to measure all the way to 2500 A. The large diameter and flexible design of the iFlex probe make it easier to measure around large conductors in tight spaces or to access tightly packed wires. You can also use the 374 FC to measure AC and DC voltage to 1000 V and resistance to 6000 Ω.</h4>
<h4></h4>
<h4>The 374 FC is Fluke Connect-enabled to wirelessly transmit results via Bluetooth to Apple and Android devices. That means you can read the results out of the arc flash zone, wearing less PPE. You can even save results to the cloud and create and send reports in email right from the field. Or converse in real-time with ShareLive™ video calls.</h4>
<h4></h4>
<h4>Versatile feature set</h4>
<h4></h4>
<h4>With True-RMS AC voltage and current measurements, the 374 FC enables you to accurately troubleshoot non-linear signals. And you can log and trend measurements to pinpoint intermittent while you are performing other tasks. The Fluke 374 FC Clamp Meter is the direct replacement for the Fluke 374 Clamp Meter.</h4>
<h4></h4>
<h4>Other useful capabilities:</h4>
<h4>● Compatible with optional TPAK magnetic hanging strap</h4>
<h4>● Comes with soft carrying case, batteries, and three-year warranty</h4>
<h4>● Measures capacitance to 1000 µF</h4>
<h4>● Features CAT III 1000 V, CAT IV 600 V safety rating</h4>
<h4>● Provides True-RMS voltage and current measurements to accurately measure non-linear signals</h4>
<h4>● Includes Min/Max/Avg and inrush recording to capture variations automatically</h4>
<h4>● Runs on two AA alkaline batteries</h4>
<p style="src:https://storage.googleapis.com/eezee-product-images/_C7z8EeaVIBbzTdMlM2hV7.png;"></p>


Fluke 374 Fc True-RMS AC/DC Clamp Meter

fluke 374 fc true-rms ac/dc clamp meter meteran klem meters fluke/福禄克 真有效值交流/直流钳形表 福禄克

fluke-374-fc-true-rms-ac-dc-clamp-meter

Resistance Measurement: 6 kΩ resistance measurement
 

Capacitance Measurement: 1000 μF capacitance measurement
 

Recording Functions: Minimum, maximum, average, and inrush recording to capture variations automatically
 

Display: Backlit display for better visibility
 

Operating Temperature: Ranges between -10°C and 50°C
 

<h3 class="md-block-header-three"><strong class="md-inline-bold">Fluke 374 600A AC/DC Clampmeter</strong> </h3><p class="md-block-unstyled"><strong class="md-inline-bold">Features and Benefits</strong></p><ul class="md-block-unordered-list-item"><li><strong class="md-inline-bold">Resistance Measurement:</strong> 6 kΩ resistance measurement<br/> </li><li><strong class="md-inline-bold">Capacitance Measurement:</strong> 1000 μF capacitance measurement<br/> </li><li><strong class="md-inline-bold">Recording Functions:</strong> Minimum, maximum, average, and inrush recording to capture variations automatically<br/> </li><li><strong class="md-inline-bold">Display:</strong> Backlit display for better visibility<br/> </li><li><strong class="md-inline-bold">Operating Temperature:</strong> Ranges between -10°C and 50°C<br/> </li></ul><p class="md-block-unstyled"><strong class="md-inline-bold">Applications</strong></p><ul class="md-block-unordered-list-item"><li>Electricians<br/> </li><li>Commercial sites<br/> </li><li>Residential plant maintenance<br/> </li><li>Home inspections</li></ul>

<h3><strong>Fluke 374 600A AC/DC Clampmeter</strong>&nbsp;</h3>
<p><strong>Features and Benefits</strong></p>
<ul>
<li><strong>Resistance Measurement:</strong> 6 kΩ resistance measurement<br>
&nbsp;</li>
<li><strong>Capacitance Measurement:</strong> 1000 μF capacitance measurement<br>
&nbsp;</li>
<li><strong>Recording Functions:</strong> Minimum, maximum, average, and inrush recording to capture variations automatically<br>
&nbsp;</li>
<li><strong>Display:</strong> Backlit display for better visibility<br>
&nbsp;</li>
<li><strong>Operating Temperature:</strong> Ranges between -10°C and 50°C<br>
&nbsp;</li>
</ul>
<p><strong>Applications</strong></p>
<ul>
<li>Electricians<br>
&nbsp;</li>
<li>Commercial sites<br>
&nbsp;</li>
<li>Residential plant maintenance<br>
&nbsp;</li>
<li>Home inspections</li>
</ul>


Abus

Screw

O Ring

Surface Mount Resistors

Circular Connectors

Contactors

Bolts

Panel Mount Indicators 

Molded Case Circuit Breakers - MCCBs

Junction & Enclosure Box

Electrical Wire 

RS Components ETH SG

Fluke 374 600A AC/DC Clampmeter

fluke 374 600a ac/dc clampmeter penjepit clamp meters pengukur pengapit fluke/福禄克 交流/直流钳形表 福禄克

fluke-374-600a-ac-dc-clampmeter

 The Fluke 376 FC True-rms Clamp Meter with iFlex is the most advanced troubleshooting tool for industrial and commercial electricians. The 376 is part of the Fluke Connect family of wireless test tools that enable you to log, trend and monitor measurements while remaining safely away from the arc flash zone through Bluetooth connectivity.  

The 376 FC clamp meter uses an integrated low-pass filter for accurate measurements of non-linear signals, such as adjustable speed drives, electronic ballasts and other non-linear loads. The clamp also uses proprietary inrush measurement technology to filter out noise and capture motor starting current exactly as the circuit protection sees it. 

Measures AC/DC current with included iFlex current probe

VFD low pass filter for accurate measurements of non-linear signals

Remotely log, trend and monitor to pinpoint intermittent faults

Inrush measurement to filter out noise and capture starting current

<h3 class="md-block-header-three"><strong class="md-inline-bold">Fluke 376 Fc True-RMS Clamp Meter</strong></h3><p class="md-block-unstyled"> The Fluke 376 FC True-rms Clamp Meter with iFlex is the most advanced troubleshooting tool for industrial and commercial electricians. The 376 is part of the Fluke Connect family of wireless test tools that enable you to log, trend and monitor measurements while remaining safely away from the arc flash zone through Bluetooth connectivity.  </p><p class="md-block-unstyled">The 376 FC clamp meter uses an integrated low-pass filter for accurate measurements of non-linear signals, such as adjustable speed drives, electronic ballasts and other non-linear loads. The clamp also uses proprietary inrush measurement technology to filter out noise and capture motor starting current exactly as the circuit protection sees it. </p><ul class="md-block-unordered-list-item"><li>Measures AC/DC current with included iFlex current probe</li><li>VFD low pass filter for accurate measurements of non-linear signals</li><li>Remotely log, trend and monitor to pinpoint intermittent faults</li><li>Inrush measurement to filter out noise and capture starting current</li></ul><p class="md-block-unstyled"><strong class="md-inline-bold">Measure:</strong></p><ul class="md-block-unordered-list-item"><li>Voltage to 1000 V AC or DC</li><li>Resistance to 60 kΩ with continuity detection</li><li>Min, max, average, and inrush recording to capture variations automatically</li><li>500 mV DC measurement range to interface with other accessories</li><li>1000 μF capacitance measurement</li></ul><p class="md-block-unstyled"><strong class="md-inline-bold">Work safely and conveniently</strong></p><p class="md-block-unstyled">The 376 FC clamp carries a CAT III 1000 V, CAT IV 600 V safety rating, designed to offer you the highest possible protection in a test tool.</p><p class="md-block-unstyled">The included iFlex flexible current probe provides easier access to large conductors in tight spaces. The flexible probe:</p><ul class="md-block-unordered-list-item"><li>Expands the measurement range to 2500 A AC</li><li>Allows frequency measurement to 500 Hz with body jaw and iFlex</li></ul>

<h3><strong>Fluke 376 Fc True-RMS Clamp Meter</strong></h3>
<p>&nbsp;The Fluke 376 FC True-rms Clamp Meter with iFlex is the most advanced troubleshooting tool for industrial and commercial electricians. The 376 is part of the Fluke Connect family of wireless test tools that enable you to log, trend and monitor measurements while remaining safely away from the arc flash zone through Bluetooth connectivity.&nbsp;&nbsp;</p>
<p>The 376 FC clamp meter uses an integrated low-pass filter for accurate measurements of non-linear signals, such as adjustable speed drives, electronic ballasts and other non-linear loads. The clamp also uses proprietary inrush measurement technology to filter out noise and capture motor starting current exactly as the circuit protection sees it.&nbsp;</p>
<ul>
<li>Measures AC/DC current with included iFlex current probe</li>
<li>VFD low pass filter for accurate measurements of non-linear signals</li>
<li>Remotely log, trend and monitor to pinpoint intermittent faults</li>
<li>Inrush measurement to filter out noise and capture starting current</li>
</ul>
<p><strong>Measure:</strong></p>
<ul>
<li>Voltage to 1000 V AC or DC</li>
<li>Resistance to 60 kΩ with continuity detection</li>
<li>Min, max, average, and inrush recording to capture variations automatically</li>
<li>500 mV DC measurement range to interface with other accessories</li>
<li>1000 μF capacitance measurement</li>
</ul>
<p><strong>Work safely and conveniently</strong></p>
<p>The 376 FC clamp carries a CAT III 1000 V, CAT IV 600 V safety rating, designed to offer you the highest possible protection in a test tool.</p>
<p>The included iFlex flexible current probe provides easier access to large conductors in tight spaces. The flexible probe:</p>
<ul>
<li>Expands the measurement range to 2500 A AC</li>
<li>Allows frequency measurement to 500 Hz with body jaw and iFlex</li>
</ul>


Fluke 376 FC True-RMS Clamp Meter

fluke 376 fc true-rms clamp meter meteran penjepit meters pengapit fluke/福禄克 真有效值钳形表 福禄克

fluke-376-fc-true-rms-clamp-meter

Fluke 381 Clamp Meter Wireless, 1000A Dc, Max Current 2500A Ac Cat Iii 1000 V, Cat Iv 600 V

 Absolute Maximum AC Current Measurement	2500A ac

Absolute Maximum DC Current Measurement	1000A dc

Absolute Maximum AC Voltage Measurement	1000V ac

Absolute Maximum DC Voltage Measurement	1000V dc

Absolute Maximum Resistance Measurement	60kΩ

Clamp Meter Type	AC-DC Flexible Clamp Meter

Best AC Voltage Accuracy	±1.5% + 5 Digits

Functions Measured	AC Current, AC Voltage, Continuity, DC Current, DC Voltage, Frequency, Resistance

DC Current Measurement Range	Maximum of 999.9 A dc

Best Resistance Measurement Accuracy	±1% + 5 Digits

Safety Category	CAT III 1000 V, CAT IV 600 V

AC Current Measurement Range	Maximum of 2500 A ac

• 1000 A ac and dc current measurement with fixed jaws
• 2500 A ac current measurement with iFlex flexible current probe
• 1000 V ac (true rms) and dc voltage measurement
• Frequency, resistance, and continuity measurement
• Display HOLD, Min, max, average and inrush recording
• Wireless technology - allows you to take readings remotely or in tough-to-reach spots.
• Automatically sets the correct measurement range for convenience
• Large and easy-to-read backlit display
• Low pass filter for accurate readings in noisy environments
• Clamping jaw avoids the risk of handling live wires
• CAT IV 600V, CAT III 1000 V safety rating

<h3 class="md-block-header-three"><strong class="md-inline-bold">Fluke 381 Clamp Meter Wireless, 1000A Dc, Max Current 2500A Ac Cat Iii 1000 V, Cat Iv 600 V</strong></h3><ul class="md-block-unordered-list-item"><li> Absolute Maximum AC Current Measurement	2500A ac</li><li>Absolute Maximum DC Current Measurement	1000A dc</li><li>Absolute Maximum AC Voltage Measurement	1000V ac</li><li>Absolute Maximum DC Voltage Measurement	1000V dc</li><li>Absolute Maximum Resistance Measurement	60kΩ</li><li>Connectivity	Wireless</li><li>Model Number	381</li><li>AC Current Measurement Resolution	100mA</li><li>DC Current Measurement Resolution	100mA</li><li>Best DC Current Accuracy	±2% + 5 Digits</li><li>Clamp Meter Type	AC-DC Flexible Clamp Meter</li><li>Best AC Current Accuracy	±2% +5 digits</li><li>Best AC Voltage Accuracy	±1.5% + 5 Digits</li><li>Best DC Voltage Accuracy	±1% + 5 Digits</li><li>True RMS	Yes</li><li>Functions Measured	AC Current, AC Voltage, Continuity, DC Current, DC Voltage, Frequency, Resistance</li><li>Jaw Capacity Busbars	34mm</li><li>Dimensions	277 x 88 x 43mm</li><li>DC Current Measurement Range	Maximum of 999.9 A dc</li><li>Width	88mm</li><li>DC Voltage Measurement Resolution	100mV</li><li>Maximum Conductor Size	7.5mm</li><li>Weight	350g</li><li>Display Type	LCD</li><li>Best Resistance Measurement Accuracy	±1% + 5 Digits</li><li>Safety Category	CAT III 1000 V, CAT IV 600 V</li><li>Maximum Operating Temperature	+50°C</li><li>Minimum Operating Temperature	-10°C</li><li>Height	43mm</li><li>AC Voltage Measurement Resolution	100mV</li><li>AC Current Measurement Range	Maximum of 2500 A ac</li><li>AC Voltage Measurement Range	1000 V ac</li><li>Safety Category Level	CAT IV, CAT III</li><li>Resistance Measurement Resolution	100mΩ</li><li>Length	277mm</li><li>Power Source	Battery</li><li>Safety Category Voltage	600 V, 1000 V</li><li>Battery Type	AA</li></ul><p class="md-block-unstyled"><strong class="md-inline-bold">Fluke 381 Features &amp; Benefits</strong></p><p class="md-block-unstyled">• 1000 A ac and dc current measurement with fixed jaws<br/>• 2500 A ac current measurement with iFlex flexible current probe<br/>• 1000 V ac (true rms) and dc voltage measurement<br/>• Frequency, resistance, and continuity measurement<br/>• Display HOLD, Min, max, average and inrush recording<br/>• Wireless technology - allows you to take readings remotely or in tough-to-reach spots.<br/>• Automatically sets the correct measurement range for convenience<br/>• Large and easy-to-read backlit display<br/>• Low pass filter for accurate readings in noisy environments<br/>• Clamping jaw avoids the risk of handling live wires<br/>• CAT IV 600V, CAT III 1000 V safety rating</p><p class="md-block-unstyled"><strong class="md-inline-bold">Applications</strong></p><p class="md-block-unstyled">• Electrical installations<br/>• Power utilities<br/>• Public infrastructure<br/>• Industrial automation </p>

<h3><strong>Fluke 381 Clamp Meter Wireless, 1000A Dc, Max Current 2500A Ac Cat Iii 1000 V, Cat Iv 600 V</strong></h3>
<ul>
<li>&nbsp;Absolute Maximum AC Current Measurement	2500A ac</li>
<li>Absolute Maximum DC Current Measurement	1000A dc</li>
<li>Absolute Maximum AC Voltage Measurement	1000V ac</li>
<li>Absolute Maximum DC Voltage Measurement	1000V dc</li>
<li>Absolute Maximum Resistance Measurement	60kΩ</li>
<li>Connectivity	Wireless</li>
<li>Model Number	381</li>
<li>AC Current Measurement Resolution	100mA</li>
<li>DC Current Measurement Resolution	100mA</li>
<li>Best DC Current Accuracy	±2% + 5 Digits</li>
<li>Clamp Meter Type	AC-DC Flexible Clamp Meter</li>
<li>Best AC Current Accuracy	±2% +5 digits</li>
<li>Best AC Voltage Accuracy	±1.5% + 5 Digits</li>
<li>Best DC Voltage Accuracy	±1% + 5 Digits</li>
<li>True RMS	Yes</li>
<li>Functions Measured	AC Current, AC Voltage, Continuity, DC Current, DC Voltage, Frequency, Resistance</li>
<li>Jaw Capacity Busbars	34mm</li>
<li>Dimensions	277 x 88 x 43mm</li>
<li>DC Current Measurement Range	Maximum of 999.9 A dc</li>
<li>Width	88mm</li>
<li>DC Voltage Measurement Resolution	100mV</li>
<li>Maximum Conductor Size	7.5mm</li>
<li>Weight	350g</li>
<li>Display Type	LCD</li>
<li>Best Resistance Measurement Accuracy	±1% + 5 Digits</li>
<li>Safety Category	CAT III 1000 V, CAT IV 600 V</li>
<li>Maximum Operating Temperature	+50°C</li>
<li>Minimum Operating Temperature	-10°C</li>
<li>Height	43mm</li>
<li>AC Voltage Measurement Resolution	100mV</li>
<li>AC Current Measurement Range	Maximum of 2500 A ac</li>
<li>AC Voltage Measurement Range	1000 V ac</li>
<li>Safety Category Level	CAT IV, CAT III</li>
<li>Resistance Measurement Resolution	100mΩ</li>
<li>Length	277mm</li>
<li>Power Source	Battery</li>
<li>Safety Category Voltage	600 V, 1000 V</li>
<li>Battery Type	AA</li>
</ul>
<p><strong>Fluke 381 Features &amp; Benefits</strong></p>
<p>• 1000 A ac and dc current measurement with fixed jaws<br>
• 2500 A ac current measurement with iFlex flexible current probe<br>
• 1000 V ac (true rms) and dc voltage measurement<br>
• Frequency, resistance, and continuity measurement<br>
• Display HOLD, Min, max, average and inrush recording<br>
• Wireless technology - allows you to take readings remotely or in tough-to-reach spots.<br>
• Automatically sets the correct measurement range for convenience<br>
• Large and easy-to-read backlit display<br>
• Low pass filter for accurate readings in noisy environments<br>
• Clamping jaw avoids the risk of handling live wires<br>
• CAT IV 600V, CAT III 1000 V safety rating</p>
<p><strong>Applications</strong></p>
<p>• Electrical installations<br>
• Power utilities<br>
• Public infrastructure<br>
• Industrial automation&nbsp;</p>


fluke 381 clamp meter wireless, 1000a dc, max current 2500a ac cat iii 1000 v, iv 600 nirkabel, arus maksimum meters pengapit wayarles, maks fluke/福禄克 无线钳形表，1000a 直流，最大电流 交流，cat v，cat 福禄克