FLUKE

SCHNEIDER ELECTRIC

Test & Measurement

test-measurement

Calibrators

calibrators

Electricals

electricals

Overload Relays

overload-relays

Toroidal Transformers

toroidal-transformers

SCHNEIDER ELECTRIC Closed Toroid for Residual Current Protection Ta - Ø 30 Mm 50437

     This   toroid is dedicated to Vigilohm Insulation Fault locators, and to VigiPacT   type A residual current protection and monitoring relays. It allows the   monitoring of the injected component from Vigilohm Insulation Monitor, and   the measurement of a current rating up to 65A for VigiPacT monitoring and   protection relays. The transformer ratio is 1/1000. The inner diameter of the toroid is 30mm   and the weight is 0.120kg. The maximum   cross section per phase (R, S, T, N) is 25mm² for a copper conductor.     

Product or component type:Earth leakage current sensor

Device application:Equipment monitoring and control

VigiPacT RH10M residual current protection relay

VigiPacT RH10P residual current protection relay

VigiPacT RH21M residual current protection relay

VigiPacT RH21P residual current protection relay

VigiPacT RH68M residual current protection relay

VigiPacT RH86M residual current protection relay

VigiPacT RH86P residual current protection relay

VigiPacT RH99M residual current protection relay

VigiPacT RH99P residual current protection relay

VigiPacT RH197M residual current protection relay

VigiPacT RH197P residual current protection relay

VigiPacT RHU residual current protection relay

VigiPacT RHUs residual current protection relay

VigiPacT RMH residual current protection relay

<h3 class="md-block-header-three"><strong class="md-inline-bold">SCHNEIDER ELECTRIC Closed Toroid for Residual Current Protection Ta - Ø 30 Mm 50437</strong></h3><ul class="md-block-unordered-list-item"><li>     This   toroid is dedicated to Vigilohm Insulation Fault locators, and to VigiPacT   type A residual current protection and monitoring relays. It allows the   monitoring of the injected component from Vigilohm Insulation Monitor, and   the measurement of a current rating up to 65A for VigiPacT monitoring and   protection relays. The transformer ratio is 1/1000. The inner diameter of the toroid is 30mm   and the weight is 0.120kg. The maximum   cross section per phase (R, S, T, N) is 25mm² for a copper conductor.     </li><li>Range:VigiPacT</li><li>Device short name:TA30</li><li>Product or component type:Earth leakage current sensor</li><li>Device application:Equipment monitoring and control</li><li>Range compatibility:</li><li>VigiPacT RH10M residual current protection relay</li><li>VigiPacT RH10P residual current protection relay</li><li>VigiPacT RH21M residual current protection relay</li><li>VigiPacT RH21P residual current protection relay</li><li>VigiPacT RH68M residual current protection relay</li><li>VigiPacT RH86M residual current protection relay</li><li>VigiPacT RH86P residual current protection relay</li><li>VigiPacT RH99M residual current protection relay</li><li>VigiPacT RH99P residual current protection relay</li><li>VigiPacT RH197M residual current protection relay</li><li>VigiPacT RH197P residual current protection relay</li><li>VigiPacT RHU residual current protection relay</li><li>VigiPacT RHUs residual current protection relay</li><li>VigiPacT RMH residual current protection relay</li><li>current sensor type:A type closed toroid</li><li>[Ie] rated operational current:65 A</li></ul>

<h3><strong>SCHNEIDER ELECTRIC Closed Toroid for Residual Current Protection Ta - Ø 30 Mm 50437</strong></h3>
<ul>
<li>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;This   toroid is dedicated to Vigilohm Insulation Fault locators, and to VigiPacT   type A residual current protection and monitoring relays. It allows the   monitoring of the injected component from Vigilohm Insulation Monitor, and   the measurement of a current rating up to 65A for VigiPacT monitoring and   protection relays. The transformer ratio is 1/1000. The inner diameter of the toroid is 30mm   and the weight is 0.120kg. The maximum   cross section per phase (R, S, T, N) is 25mm² for a copper conductor.&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</li>
<li>Range:VigiPacT</li>
<li>Device short name:TA30</li>
<li>Product or component type:Earth leakage current sensor</li>
<li>Device application:Equipment monitoring and control</li>
<li>Range compatibility:</li>
<li>VigiPacT RH10M residual current protection relay</li>
<li>VigiPacT RH10P residual current protection relay</li>
<li>VigiPacT RH21M residual current protection relay</li>
<li>VigiPacT RH21P residual current protection relay</li>
<li>VigiPacT RH68M residual current protection relay</li>
<li>VigiPacT RH86M residual current protection relay</li>
<li>VigiPacT RH86P residual current protection relay</li>
<li>VigiPacT RH99M residual current protection relay</li>
<li>VigiPacT RH99P residual current protection relay</li>
<li>VigiPacT RH197M residual current protection relay</li>
<li>VigiPacT RH197P residual current protection relay</li>
<li>VigiPacT RHU residual current protection relay</li>
<li>VigiPacT RHUs residual current protection relay</li>
<li>VigiPacT RMH residual current protection relay</li>
<li>current sensor type:A type closed toroid</li>
<li>[Ie] rated operational current:65 A</li>
</ul>


Jimmy Foo

Philips

Thomas & Betts

BRADY

Bussmann

Weidmuller

FUJI

Crouse-Hinds

Circuit Breaker

Fuses & Fusegear

Plugs & Connector 

Light Bulbs

Led Lights

Contactors

Junction & Enclosure Box

Other Electrical Accessories

Light Tubes

Doreen Tan

buyerIntroduction

Schneider Electric Closed Toroid for Residual Current Protection Ta - Ø 30 Mm 50437

schneider electric closed toroid residual current protection ta 30mm 50437 untuk perlindungan arus sisa toroidal transformers tertutup elektrik baki electric/施耐德电气 用于剩余电流保护的闭合环形线圈 施耐德电气

schneider-electric-closed-toroid-for-residual-current-protection-ta-30-mm-50437

Abb TA-25DU6.5 Tor 6.5A AX09 12 18 25 32 40

 The TA25DU-6.5 thermal overload relay is an economic electromechanical protection device for the main circuit. It offers reliable and fast protection for motors in the event of overload or phase failure. The device has trip class 10A. Further features are the temperature compensation, trip contact (NC), signal contact (NO), automatic- or manual reset selectable, trip-free mechanism, STOP- and Test function and a trip indication. The overload relays are connected directly to the block contactors. Single mounting kits are available as accessory. 

Rated Operational Voltage:Main Circuit 690 V AC

Rated Frequency (f):Auxiliary Circuit 50 Hz

Conventional Free-air Thermal Current (Ith):Auxiliary Circuit NC 5 A

Connecting Capacity Auxiliary Circuit:Flexible 1/2x 0.75 ... 2.5 mm²

Connecting Capacity Main Circuit:Flexible with Ferrule 1x 0.75 ... 4 mm²

Recommended Screw Driver:Auxiliary Circuit Pozidriv 1

Power Loss:at Rated Operating Conditions per Pole 1.1 ... 2.2 W

<h3 class="md-block-header-three"><strong class="md-inline-bold">Abb TA-25DU6.5 Tor 6.5A AX09 12 18 25 32 40</strong></h3><ul class="md-block-unordered-list-item"><li> The TA25DU-6.5 thermal overload relay is an economic electromechanical protection device for the main circuit. It offers reliable and fast protection for motors in the event of overload or phase failure. The device has trip class 10A. Further features are the temperature compensation, trip contact (NC), signal contact (NO), automatic- or manual reset selectable, trip-free mechanism, STOP- and Test function and a trip indication. The overload relays are connected directly to the block contactors. Single mounting kits are available as accessory. </li><li>Product Net Width:44 mm</li><li>Product Net Height:80 mm</li><li>Product Net Depth / Length:94 mm</li><li>Product Net Weight:0.15 kg  </li></ul><p class="md-block-unstyled"><strong class="md-inline-bold">Technical</strong></p><ul class="md-block-unordered-list-item"><li>Rated Operational Voltage:Main Circuit 690 V AC</li><li>Main Circuit 440 V DC</li><li>Rated Operational Current (Ie):6.5 A</li><li>Rated Frequency (f):Auxiliary Circuit 50 Hz</li><li>Auxiliary Circuit 60 Hz</li><li>Auxiliary Circuit DC</li><li>Main Circuit 60 Hz</li><li>Main Circuit 50 Hz</li><li>Main Circuit DC</li><li>Number of Poles:3</li><li>Number of Auxiliary Contacts NC:1</li><li>Number of Auxiliary Contacts NO:1</li><li>Number of Protected Poles:1</li><li>Conventional Free-air Thermal Current (Ith):Auxiliary Circuit NC 5 A</li><li>Auxiliary Circuit NO 5 A</li><li>Degree of Protection:Housing IP20</li><li>Main Circuit Terminals IP10</li><li>Pollution Degree:3</li><li>Connecting Capacity Auxiliary Circuit:Flexible 1/2x 0.75 ... 2.5 mm²</li><li>Rigid 1/2x 0.75 ... 4 mm²</li><li>Connecting Capacity Main Circuit:Flexible with Ferrule 1x 0.75 ... 4 mm²</li><li>Flexible with Ferrule 2x 0.75 ... 4 mm²</li><li>Flexible 1x 0.75 ... 4 mm²</li><li>Flexible 2x 0.75 ... 4 mm²</li><li>Rigid 1x 0.75 ... 4 mm²</li><li>Rigid 2x 0.75 ... 4 mm²</li><li>Recommended Screw Driver:Auxiliary Circuit Pozidriv 1</li><li>Main Circuit Pozidriv 2</li><li>Power Loss:at Rated Operating Conditions per Pole 1.1 ... 2.2 W</li><li>Suitable For:AX09</li><li>AX12</li><li>AX18</li><li>AX25</li><li>AX32</li><li>AX40</li><li>Standards:CSA 22.2 No. 14</li><li>IEC/EN 60947-1</li><li>IEC/EN 60947-4-1</li><li>IEC/EN 60947-5-1</li><li>UL 508</li><li>Unit of measurement : Pcs</li></ul>

<h3><strong>Abb TA-25DU6.5 Tor 6.5A AX09 12 18 25 32 40</strong></h3>
<ul>
<li>&nbsp;The TA25DU-6.5 thermal overload relay is an economic electromechanical protection device for the main circuit. It offers reliable and fast protection for motors in the event of overload or phase failure. The device has trip class 10A. Further features are the temperature compensation, trip contact (NC), signal contact (NO), automatic- or manual reset selectable, trip-free mechanism, STOP- and Test function and a trip indication. The overload relays are connected directly to the block contactors. Single mounting kits are available as accessory.&nbsp;</li>
<li>Product Net Width:44 mm</li>
<li>Product Net Height:80 mm</li>
<li>Product Net Depth / Length:94 mm</li>
<li>Product Net Weight:0.15 kg&nbsp;&nbsp;</li>
</ul>
<p><strong>Technical</strong></p>
<ul>
<li>Rated Operational Voltage:Main Circuit 690 V AC</li>
<li>Main Circuit 440 V DC</li>
<li>Rated Operational Current (Ie):6.5 A</li>
<li>Rated Frequency (f):Auxiliary Circuit 50 Hz</li>
<li>Auxiliary Circuit 60 Hz</li>
<li>Auxiliary Circuit DC</li>
<li>Main Circuit 60 Hz</li>
<li>Main Circuit 50 Hz</li>
<li>Main Circuit DC</li>
<li>Number of Poles:3</li>
<li>Number of Auxiliary Contacts NC:1</li>
<li>Number of Auxiliary Contacts NO:1</li>
<li>Number of Protected Poles:1</li>
<li>Conventional Free-air Thermal Current (Ith):Auxiliary Circuit NC 5 A</li>
<li>Auxiliary Circuit NO 5 A</li>
<li>Degree of Protection:Housing IP20</li>
<li>Main Circuit Terminals IP10</li>
<li>Pollution Degree:3</li>
<li>Connecting Capacity Auxiliary Circuit:Flexible 1/2x 0.75 ... 2.5 mm²</li>
<li>Rigid 1/2x 0.75 ... 4 mm²</li>
<li>Connecting Capacity Main Circuit:Flexible with Ferrule 1x 0.75 ... 4 mm²</li>
<li>Flexible with Ferrule 2x 0.75 ... 4 mm²</li>
<li>Flexible 1x 0.75 ... 4 mm²</li>
<li>Flexible 2x 0.75 ... 4 mm²</li>
<li>Rigid 1x 0.75 ... 4 mm²</li>
<li>Rigid 2x 0.75 ... 4 mm²</li>
<li>Recommended Screw Driver:Auxiliary Circuit Pozidriv 1</li>
<li>Main Circuit Pozidriv 2</li>
<li>Power Loss:at Rated Operating Conditions per Pole 1.1 ... 2.2 W</li>
<li>Suitable For:AX09</li>
<li>AX12</li>
<li>AX18</li>
<li>AX25</li>
<li>AX32</li>
<li>AX40</li>
<li>Standards:CSA 22.2 No. 14</li>
<li>IEC/EN 60947-1</li>
<li>IEC/EN 60947-4-1</li>
<li>IEC/EN 60947-5-1</li>
<li>UL 508</li>
<li>Unit of measurement : Pcs</li>
</ul>


Abb TA-25DU6.5 Thermal Overload Relay 6.5A AX09 12 18 25 32 40

abb ta-25du6.5 thermal overload relay 6.5a ax09 12 18 25 32 40 relai kelebihan beban termal relays geganti terma ta-25du6.5热过载继电器6.5a

abb-ta-25du6-5-thermal-overload-relay-6-5a-ax09-12-18-25-32-40

Abb TA-25DU8.5 Tor 8.5A AX09 12 18 25 32 40

TA25DU-8.5M (6.0-8.5A) thermal overload relay is an economic electromechanical protection device for the main circuit. It offers reliable and fast protection for motors in the event of overload or phase failure. The device has trip class 10A. Further features are the temperature compensation, trip contact (NC), signal contact (NO), automatic- or manual reset selectable, trip-free mechanism, STOP- and Test function and a trip indication. The overload relays are connected directly to the block contactors. Single mounting kits are available as accessory.

<h3 class="md-block-header-three"><strong class="md-inline-bold">Abb TA-25DU8.5 Tor 8.5A AX09 12 18 25 32 40</strong></h3><h3 class="md-block-header-three"><strong class="md-inline-bold">Long Description:</strong></h3><ul class="md-block-unordered-list-item"><li>TA25DU-8.5M (6.0-8.5A) thermal overload relay is an economic electromechanical protection device for the main circuit. It offers reliable and fast protection for motors in the event of overload or phase failure. The device has trip class 10A. Further features are the temperature compensation, trip contact (NC), signal contact (NO), automatic- or manual reset selectable, trip-free mechanism, STOP- and Test function and a trip indication. The overload relays are connected directly to the block contactors. Single mounting kits are available as accessory.</li><li>Product Net Width:44 mm</li><li>Product Net Height:80 mm</li><li>Product Net Depth / Length:94 mm</li><li>Product Net Weight:0.15 kg  </li></ul><p class="md-block-unstyled"><strong class="md-inline-bold">Technical</strong></p><ul class="md-block-unordered-list-item"><li>Rated Operational Voltage:Main Circuit 690 V AC</li><li>Main Circuit 440 V DC</li><li>Rated Operational Current (Ie):8.5 A</li><li>Rated Frequency (f):Auxiliary Circuit 50 Hz</li><li>Auxiliary Circuit 60 Hz</li><li>Auxiliary Circuit DC</li><li>Main Circuit 60 Hz</li><li>Main Circuit 50 Hz</li><li>Main Circuit DC</li><li>Number of Poles:3</li><li>Number of Auxiliary Contacts NC:1</li><li>Number of Auxiliary Contacts NO:1</li><li>Number of Protected Poles:1</li><li>Conventional Free-air Thermal Current (Ith):Auxiliary Circuit NC 5 A</li><li>Auxiliary Circuit NO 5 A</li><li>Degree of Protection:Housing IP20</li><li>Main Circuit Terminals IP10</li><li>Pollution Degree:3</li><li>Connecting Capacity Auxiliary Circuit:Flexible 1/2x 0.75 ... 2.5 mm²</li><li>Rigid 1/2x 0.75 ... 4 mm²</li><li>Connecting Capacity Main Circuit:Flexible with Ferrule 1x 0.75 ... 4 mm²</li><li>Flexible with Ferrule 2x 0.75 ... 4 mm²</li><li>Flexible 1x 0.75 ... 4 mm²</li><li>Flexible 2x 0.75 ... 4 mm²</li><li>Rigid 1x 0.75 ... 4 mm²</li><li>Rigid 2x 0.75 ... 4 mm²</li><li>Recommended Screw Driver:Auxiliary Circuit Pozidriv 1</li><li>Main Circuit Pozidriv 2</li><li>Power Loss:at Rated Operating Conditions per Pole 1.1 ... 2.2 W</li><li>Suitable For:AX09</li><li>AX12</li><li>AX18</li><li>AX25</li><li>AX32</li><li>AX40</li><li>Standards:CSA 22.2 No. 14</li><li>IEC/EN 60947-1</li><li>IEC/EN 60947-4-1</li><li>IEC/EN 60947-5-1</li><li>UL 508</li><li>Unit of measurement : Pcs</li></ul>

<h3><strong>Abb TA-25DU8.5 Tor 8.5A AX09 12 18 25 32 40</strong></h3>
<h3><strong>Long Description:</strong></h3>
<ul>
<li>TA25DU-8.5M (6.0-8.5A) thermal overload relay is an economic electromechanical protection device for the main circuit. It offers reliable and fast protection for motors in the event of overload or phase failure. The device has trip class 10A. Further features are the temperature compensation, trip contact (NC), signal contact (NO), automatic- or manual reset selectable, trip-free mechanism, STOP- and Test function and a trip indication. The overload relays are connected directly to the block contactors. Single mounting kits are available as accessory.</li>
<li>Product Net Width:44 mm</li>
<li>Product Net Height:80 mm</li>
<li>Product Net Depth / Length:94 mm</li>
<li>Product Net Weight:0.15 kg&nbsp;&nbsp;</li>
</ul>
<p><strong>Technical</strong></p>
<ul>
<li>Rated Operational Voltage:Main Circuit 690 V AC</li>
<li>Main Circuit 440 V DC</li>
<li>Rated Operational Current (Ie):8.5 A</li>
<li>Rated Frequency (f):Auxiliary Circuit 50 Hz</li>
<li>Auxiliary Circuit 60 Hz</li>
<li>Auxiliary Circuit DC</li>
<li>Main Circuit 60 Hz</li>
<li>Main Circuit 50 Hz</li>
<li>Main Circuit DC</li>
<li>Number of Poles:3</li>
<li>Number of Auxiliary Contacts NC:1</li>
<li>Number of Auxiliary Contacts NO:1</li>
<li>Number of Protected Poles:1</li>
<li>Conventional Free-air Thermal Current (Ith):Auxiliary Circuit NC 5 A</li>
<li>Auxiliary Circuit NO 5 A</li>
<li>Degree of Protection:Housing IP20</li>
<li>Main Circuit Terminals IP10</li>
<li>Pollution Degree:3</li>
<li>Connecting Capacity Auxiliary Circuit:Flexible 1/2x 0.75 ... 2.5 mm²</li>
<li>Rigid 1/2x 0.75 ... 4 mm²</li>
<li>Connecting Capacity Main Circuit:Flexible with Ferrule 1x 0.75 ... 4 mm²</li>
<li>Flexible with Ferrule 2x 0.75 ... 4 mm²</li>
<li>Flexible 1x 0.75 ... 4 mm²</li>
<li>Flexible 2x 0.75 ... 4 mm²</li>
<li>Rigid 1x 0.75 ... 4 mm²</li>
<li>Rigid 2x 0.75 ... 4 mm²</li>
<li>Recommended Screw Driver:Auxiliary Circuit Pozidriv 1</li>
<li>Main Circuit Pozidriv 2</li>
<li>Power Loss:at Rated Operating Conditions per Pole 1.1 ... 2.2 W</li>
<li>Suitable For:AX09</li>
<li>AX12</li>
<li>AX18</li>
<li>AX25</li>
<li>AX32</li>
<li>AX40</li>
<li>Standards:CSA 22.2 No. 14</li>
<li>IEC/EN 60947-1</li>
<li>IEC/EN 60947-4-1</li>
<li>IEC/EN 60947-5-1</li>
<li>UL 508</li>
<li>Unit of measurement : Pcs</li>
</ul>


Abb TA-25DU8.5 Thermal Overload Relay 8.5A AX09 12 18 25 32 40

abb ta-25du8.5 thermal overload relay 8.5a ax09 12 18 25 32 40 relai kelebihan beban termal relays geganti terma ta-25du8.5热过载继电器8.5a

abb-ta-25du8-5-thermal-overload-relay-8-5a-ax09-12-18-25-32-40

 The TA75DU-80 thermal overload relay is an economic electromechanical protection device for the main circuit. It offers reliable and fast protection for motors in the event of overload or phase failure. The device has trip class 10A. Further features are the temperature compensation, trip contact (NC), signal contact (NO), automatic- or manual reset selectable, trip-free mechanism, STOP- and Test function and a trip indication. The overload relays are connected directly to the block contactors. Single mounting kits are available as accessory. 

Rated Operational Voltage:Auxiliary Circuit 440 V DC

Rated Impulse Withstand Voltage (Uimp):Auxiliary Circuit 6 kV

Conventional Free-air Thermal Current (Ith):Auxiliary Circuit NC 10 A

Rated Operational Current AC-15 (Ie):(120 V) NC 3 A

Rated Operational Current DC-13 (Ie):(125 V) NC 0.25 A

Connecting Capacity Auxiliary Circuit:Flexible with Ferrule 1/2x 0.75 ... 2.5 mm²

Connecting Capacity Main Circuit:Flexible with Ferrule 1x 2.5 ... 25 mm²

Tightening Torque:Auxiliary Circuit 1 ... 1.3 N·m

Wire Stripping Length:Auxiliary Circuit 9 mm

Power Loss:at Rated Operating Conditions per Pole 2.5 ... 4.4 W

Maximum Operating Voltage UL/CSA:Main Circuit 600 V AC

Connecting Capacity Main Circuit UL/CSA:Flexible 1/2x 8-1 AWG

Connecting Capacity Auxiliary Circuit UL/CSA:Flexible 1/2x 18-14 AWG

Tightening Torque UL/CSA:Auxiliary Circuit 12 in·lb

<h3 class="md-block-header-three"><strong class="md-inline-bold">Abb TA-75DU80 Tor 80A AX50 65 80</strong></h3><ul class="md-block-unordered-list-item"><li> The TA75DU-80 thermal overload relay is an economic electromechanical protection device for the main circuit. It offers reliable and fast protection for motors in the event of overload or phase failure. The device has trip class 10A. Further features are the temperature compensation, trip contact (NC), signal contact (NO), automatic- or manual reset selectable, trip-free mechanism, STOP- and Test function and a trip indication. The overload relays are connected directly to the block contactors. Single mounting kits are available as accessory. </li><li>Product Net Width:58 mm</li><li>Product Net Height:92 mm</li><li>Product Net Depth / Length:111 mm</li><li>Product Net Weight:0.37 kg  </li></ul><p class="md-block-unstyled"><strong class="md-inline-bold">Technical</strong></p><ul class="md-block-unordered-list-item"><li>Setting Range:60 ... 80 A</li><li>Rated Operational Voltage:Auxiliary Circuit 440 V DC</li><li>Auxiliary Circuit 500 V AC</li><li>Main Circuit 690 V AC</li><li>Main Circuit 440 V DC</li><li>Rated Operational Current (Ie):80 A</li><li>Rated Frequency (f):Auxiliary Circuit 50 Hz</li><li>Auxiliary Circuit 60 Hz</li><li>Auxiliary Circuit DC</li><li>Main Circuit 60 Hz</li><li>Main Circuit 50 Hz</li><li>Main Circuit DC</li><li>Rated Impulse Withstand Voltage (Uimp):Auxiliary Circuit 6 kV</li><li>Main Circuit 6 kV</li><li>Rated Insulation Voltage (Ui):690 V</li><li>Number of Poles:3</li><li>Number of Auxiliary Contacts NC:1</li><li>Number of Auxiliary Contacts NO:1</li><li>Number of Protected Poles:3</li><li>Conventional Free-air Thermal Current (Ith):Auxiliary Circuit NC 10 A</li><li>Auxiliary Circuit NO 6 A</li><li>Rated Operational Current AC-15 (Ie):(120 V) NC 3 A</li><li>(120 V) NO 1.5 A</li><li>(240 V) NC 3 A</li><li>(240 V) NO 1.5 A</li><li>(400 V) NC 1.9 A</li><li>(400 V) NO 1 A</li><li>(440 V) NC 1 A</li><li>(440 V) NO 1 A</li><li>(500 V) NC 1 A</li><li>(500 V) NO 1 A</li><li>Rated Operational Current DC-13 (Ie):(125 V) NC 0.25 A</li><li>(125 V) NO 0.25 A</li><li>(24 V) NC 1.25 A</li><li>(24 V) NO 1.25 A</li><li>(250 V) NC 0.12 A</li><li>(250 V) NO 0.04 A</li><li>(60 V) NC 0.25 A</li><li>(60 V) NO 0.25 A</li><li>Degree of Protection:Housing IP20</li><li>Main Circuit Terminals IP10</li><li>Pollution Degree:3</li><li>Connecting Capacity Auxiliary Circuit:Flexible with Ferrule 1/2x 0.75 ... 2.5 mm²</li><li>Flexible 1/2x 0.75 ... 2.5 mm²</li><li>Rigid 1/2x 0.75 ... 4 mm²</li><li>Connecting Capacity Main Circuit:Flexible with Ferrule 1x 2.5 ... 25 mm²</li><li>Flexible with Ferrule 2x 2.5 ... 10 mm²</li><li>Rigid 1x 2.5 ... 25 mm²</li><li>Rigid 2x 2.5 ... 16 mm²</li><li>Tightening Torque:Auxiliary Circuit 1 ... 1.3 N·m</li><li>Main Circuit 4.5 N·m</li><li>Wire Stripping Length:Auxiliary Circuit 9 mm</li><li>Main Circuit 14 mm</li><li>Recommended Screw Driver:Auxiliary Circuit Pozidriv 1</li><li>Main Circuit Pozidriv 2</li><li>Power Loss:at Rated Operating Conditions per Pole 2.5 ... 4.4 W</li><li>Suitable For:A50</li><li>A63</li><li>A75</li><li>AE50</li><li>AE63</li><li>AE75</li><li>Standards:IEC/EN 60947-1</li><li>IEC/EN 60947-4-1</li><li>IEC/EN 60947-5-1</li><li>UL 60947-1</li><li>UL 60947-4-1</li></ul><p class="md-block-unstyled"><strong class="md-inline-bold">Technical UL/CSA</strong></p><ul class="md-block-unordered-list-item"><li>Maximum Operating Voltage UL/CSA:Main Circuit 600 V AC</li><li>Contact Rating UL/CSA:(NC:) B600</li><li>(NO:) C300</li><li>Connecting Capacity Main Circuit UL/CSA:Flexible 1/2x 8-1 AWG</li><li>Stranded 1/2x 8-1 AWG</li><li>Connecting Capacity Auxiliary Circuit UL/CSA:Flexible 1/2x 18-14 AWG</li><li>Stranded 1/2x 18-14 AWG</li><li>Tightening Torque UL/CSA:Auxiliary Circuit 12 in·lb</li><li>Main Circuit 40 in·lb</li><li>Unit of measurement : Pcs</li></ul>

<h3><strong>Abb TA-75DU80 Tor 80A AX50 65 80</strong></h3>
<ul>
<li>&nbsp;The TA75DU-80 thermal overload relay is an economic electromechanical protection device for the main circuit. It offers reliable and fast protection for motors in the event of overload or phase failure. The device has trip class 10A. Further features are the temperature compensation, trip contact (NC), signal contact (NO), automatic- or manual reset selectable, trip-free mechanism, STOP- and Test function and a trip indication. The overload relays are connected directly to the block contactors. Single mounting kits are available as accessory.&nbsp;</li>
<li>Product Net Width:58 mm</li>
<li>Product Net Height:92 mm</li>
<li>Product Net Depth / Length:111 mm</li>
<li>Product Net Weight:0.37 kg&nbsp;&nbsp;</li>
</ul>
<p><strong>Technical</strong></p>
<ul>
<li>Setting Range:60 ... 80 A</li>
<li>Rated Operational Voltage:Auxiliary Circuit 440 V DC</li>
<li>Auxiliary Circuit 500 V AC</li>
<li>Main Circuit 690 V AC</li>
<li>Main Circuit 440 V DC</li>
<li>Rated Operational Current (Ie):80 A</li>
<li>Rated Frequency (f):Auxiliary Circuit 50 Hz</li>
<li>Auxiliary Circuit 60 Hz</li>
<li>Auxiliary Circuit DC</li>
<li>Main Circuit 60 Hz</li>
<li>Main Circuit 50 Hz</li>
<li>Main Circuit DC</li>
<li>Rated Impulse Withstand Voltage (Uimp):Auxiliary Circuit 6 kV</li>
<li>Main Circuit 6 kV</li>
<li>Rated Insulation Voltage (Ui):690 V</li>
<li>Number of Poles:3</li>
<li>Number of Auxiliary Contacts NC:1</li>
<li>Number of Auxiliary Contacts NO:1</li>
<li>Number of Protected Poles:3</li>
<li>Conventional Free-air Thermal Current (Ith):Auxiliary Circuit NC 10 A</li>
<li>Auxiliary Circuit NO 6 A</li>
<li>Rated Operational Current AC-15 (Ie):(120 V) NC 3 A</li>
<li>(120 V) NO 1.5 A</li>
<li>(240 V) NC 3 A</li>
<li>(240 V) NO 1.5 A</li>
<li>(400 V) NC 1.9 A</li>
<li>(400 V) NO 1 A</li>
<li>(440 V) NC 1 A</li>
<li>(440 V) NO 1 A</li>
<li>(500 V) NC 1 A</li>
<li>(500 V) NO 1 A</li>
<li>Rated Operational Current DC-13 (Ie):(125 V) NC 0.25 A</li>
<li>(125 V) NO 0.25 A</li>
<li>(24 V) NC 1.25 A</li>
<li>(24 V) NO 1.25 A</li>
<li>(250 V) NC 0.12 A</li>
<li>(250 V) NO 0.04 A</li>
<li>(60 V) NC 0.25 A</li>
<li>(60 V) NO 0.25 A</li>
<li>Degree of Protection:Housing IP20</li>
<li>Main Circuit Terminals IP10</li>
<li>Pollution Degree:3</li>
<li>Connecting Capacity Auxiliary Circuit:Flexible with Ferrule 1/2x 0.75 ... 2.5 mm²</li>
<li>Flexible 1/2x 0.75 ... 2.5 mm²</li>
<li>Rigid 1/2x 0.75 ... 4 mm²</li>
<li>Connecting Capacity Main Circuit:Flexible with Ferrule 1x 2.5 ... 25 mm²</li>
<li>Flexible with Ferrule 2x 2.5 ... 10 mm²</li>
<li>Rigid 1x 2.5 ... 25 mm²</li>
<li>Rigid 2x 2.5 ... 16 mm²</li>
<li>Tightening Torque:Auxiliary Circuit 1 ... 1.3 N·m</li>
<li>Main Circuit 4.5 N·m</li>
<li>Wire Stripping Length:Auxiliary Circuit 9 mm</li>
<li>Main Circuit 14 mm</li>
<li>Recommended Screw Driver:Auxiliary Circuit Pozidriv 1</li>
<li>Main Circuit Pozidriv 2</li>
<li>Power Loss:at Rated Operating Conditions per Pole 2.5 ... 4.4 W</li>
<li>Suitable For:A50</li>
<li>A63</li>
<li>A75</li>
<li>AE50</li>
<li>AE63</li>
<li>AE75</li>
<li>Standards:IEC/EN 60947-1</li>
<li>IEC/EN 60947-4-1</li>
<li>IEC/EN 60947-5-1</li>
<li>UL 60947-1</li>
<li>UL 60947-4-1</li>
</ul>
<p><strong>Technical UL/CSA</strong></p>
<ul>
<li>Maximum Operating Voltage UL/CSA:Main Circuit 600 V AC</li>
<li>Contact Rating UL/CSA:(NC:) B600</li>
<li>(NO:) C300</li>
<li>Connecting Capacity Main Circuit UL/CSA:Flexible 1/2x 8-1 AWG</li>
<li>Stranded 1/2x 8-1 AWG</li>
<li>Connecting Capacity Auxiliary Circuit UL/CSA:Flexible 1/2x 18-14 AWG</li>
<li>Stranded 1/2x 18-14 AWG</li>
<li>Tightening Torque UL/CSA:Auxiliary Circuit 12 in·lb</li>
<li>Main Circuit 40 in·lb</li>
<li>Unit of measurement : Pcs</li>
</ul>


Abb TA-75DU80 Thermal Overload Relay 80A AX50 65 80

abb ta-75du80 thermal overload relay 80a ax50 65 80 relai kelebihan beban termal relays geganti muatan terma 热过载继电器

abb-ta-75du80-thermal-overload-relay-80a-ax50-65-80

Abb TA-25DU14M Tor 14A AX09 12 18 25 32 40

AX09...AX25 contactors are mainly used for controlling 3-phase motors and power circuits up to 690 V AC. These contactors are of the block type design with: – 3 main poles and 1 built-in auxiliary contact – control circuit: AC operated – add-on auxiliary contact blocks for front or side mounting and a wide range of accessories.

Power Loss:at Rated Operating Conditions per Pole 1.2 ... 2.4 W

<h3 class="md-block-header-three"><strong class="md-inline-bold">Abb TA-25DU14M Tor 14A AX09 12 18 25 32 40</strong></h3><ul class="md-block-unordered-list-item"><li>AX09...AX25 contactors are mainly used for controlling 3-phase motors and power circuits up to 690 V AC. These contactors are of the block type design with: – 3 main poles and 1 built-in auxiliary contact – control circuit: AC operated – add-on auxiliary contact blocks for front or side mounting and a wide range of accessories.</li><li>Product Net Width:44mm _</li><li>Product Net Depth/Length:74mm _</li><li>Product Net Height:76.3mm _</li><li>Product Net Weight:0.326kg _  </li></ul><p class="md-block-unstyled"><strong class="md-inline-bold">Technical</strong></p><ul class="md-block-unordered-list-item"><li>Rated Operational Voltage:Main Circuit 690 V AC</li><li>Main Circuit 440 V DC</li><li>Rated Operational Current (Ie):14 A</li><li>Rated Frequency (f):Auxiliary Circuit 50 Hz</li><li>Auxiliary Circuit 60 Hz</li><li>Auxiliary Circuit DC</li><li>Main Circuit 60 Hz</li><li>Main Circuit 50 Hz</li><li>Main Circuit DC</li><li>Number of Poles:3</li><li>Number of Auxiliary Contacts NC:1</li><li>Number of Auxiliary Contacts NO:1</li><li>Number of Protected Poles:1</li><li>Conventional Free-air Thermal Current (Ith):Auxiliary Circuit NC 5 A</li><li>Auxiliary Circuit NO 5 A</li><li>Degree of Protection:Housing IP20</li><li>Main Circuit Terminals IP10</li><li>Pollution Degree:3</li><li>Connecting Capacity Auxiliary Circuit:Flexible 1/2x 0.75 ... 2.5 mm²</li><li>Rigid 1/2x 0.75 ... 4 mm²</li><li>Connecting Capacity Main Circuit:Flexible with Ferrule 1x 0.75 ... 4 mm²</li><li>Flexible with Ferrule 2x 0.75 ... 4 mm²</li><li>Flexible 1x 0.75 ... 4 mm²</li><li>Flexible 2x 0.75 ... 4 mm²</li><li>Rigid 1x 0.75 ... 4 mm²</li><li>Rigid 2x 0.75 ... 4 mm²</li><li>Wire Stripping Length:Auxiliary Circuit 9 mm</li><li>Main Circuit 12 mm</li><li>Recommended Screw Driver:Auxiliary Circuit Pozidriv 1</li><li>Main Circuit Pozidriv 2</li><li>Power Loss:at Rated Operating Conditions per Pole 1.2 ... 2.4 W</li><li>Suitable For:AX09</li><li>AX12</li><li>AX18</li><li>AX25</li><li>AX32</li><li>AX40</li><li>Standards:CSA 22.2 No. 14</li><li>IEC/EN 60947-1</li><li>IEC/EN 60947-4-1</li><li>IEC/EN 60947-5-1</li><li>UL 508</li><li>Unit of measurement : Pcs</li></ul>

<h3><strong>Abb TA-25DU14M Tor 14A AX09 12 18 25 32 40</strong></h3>
<ul>
<li>AX09...AX25 contactors are mainly used for controlling 3-phase motors and power circuits up to 690 V AC. These contactors are of the block type design with: – 3 main poles and 1 built-in auxiliary contact – control circuit: AC operated – add-on auxiliary contact blocks for front or side mounting and a wide range of accessories.</li>
<li>Product Net Width:44mm _</li>
<li>Product Net Depth/Length:74mm _</li>
<li>Product Net Height:76.3mm _</li>
<li>Product Net Weight:0.326kg _&nbsp;&nbsp;</li>
</ul>
<p><strong>Technical</strong></p>
<ul>
<li>Rated Operational Voltage:Main Circuit 690 V AC</li>
<li>Main Circuit 440 V DC</li>
<li>Rated Operational Current (Ie):14 A</li>
<li>Rated Frequency (f):Auxiliary Circuit 50 Hz</li>
<li>Auxiliary Circuit 60 Hz</li>
<li>Auxiliary Circuit DC</li>
<li>Main Circuit 60 Hz</li>
<li>Main Circuit 50 Hz</li>
<li>Main Circuit DC</li>
<li>Number of Poles:3</li>
<li>Number of Auxiliary Contacts NC:1</li>
<li>Number of Auxiliary Contacts NO:1</li>
<li>Number of Protected Poles:1</li>
<li>Conventional Free-air Thermal Current (Ith):Auxiliary Circuit NC 5 A</li>
<li>Auxiliary Circuit NO 5 A</li>
<li>Degree of Protection:Housing IP20</li>
<li>Main Circuit Terminals IP10</li>
<li>Pollution Degree:3</li>
<li>Connecting Capacity Auxiliary Circuit:Flexible 1/2x 0.75 ... 2.5 mm²</li>
<li>Rigid 1/2x 0.75 ... 4 mm²</li>
<li>Connecting Capacity Main Circuit:Flexible with Ferrule 1x 0.75 ... 4 mm²</li>
<li>Flexible with Ferrule 2x 0.75 ... 4 mm²</li>
<li>Flexible 1x 0.75 ... 4 mm²</li>
<li>Flexible 2x 0.75 ... 4 mm²</li>
<li>Rigid 1x 0.75 ... 4 mm²</li>
<li>Rigid 2x 0.75 ... 4 mm²</li>
<li>Wire Stripping Length:Auxiliary Circuit 9 mm</li>
<li>Main Circuit 12 mm</li>
<li>Recommended Screw Driver:Auxiliary Circuit Pozidriv 1</li>
<li>Main Circuit Pozidriv 2</li>
<li>Power Loss:at Rated Operating Conditions per Pole 1.2 ... 2.4 W</li>
<li>Suitable For:AX09</li>
<li>AX12</li>
<li>AX18</li>
<li>AX25</li>
<li>AX32</li>
<li>AX40</li>
<li>Standards:CSA 22.2 No. 14</li>
<li>IEC/EN 60947-1</li>
<li>IEC/EN 60947-4-1</li>
<li>IEC/EN 60947-5-1</li>
<li>UL 508</li>
<li>Unit of measurement : Pcs</li>
</ul>


Abb TA-25DU14M Thermal Overload Relay 14A AX09 12 18 25 32 40

abb ta-25du14m thermal overload relay 14a ax09 12 18 25 32 40 relai kelebihan beban termal relays geganti muatan terma 热过载继电器

abb-ta-25du14m-thermal-overload-relay-14a-ax09-12-18-25-32-40

The TF42-35 thermal overload relay is an economic electromechanical protection device for the main circuit. It offers reliable and fast protection for motors in the event of overload or phase failure. The device has trip class 10. Further features are the temperature compensation, trip contact (NC), signal contact (NO), automatic- or manual reset selectable, trip-free mechanism, STOP function and a trip indication. The overload relays are connected directly to the block contactors. Single mounting kits are available as accessory.

Rated Operational Voltage:Auxiliary Circuit 600 V AC/DC

Conventional Free-air Thermal Current (Ith):Auxiliary Circuit NC 6 A

Rated Operational Current DC-13 (Ie):(125 V) NC 0.55 A

Flexible with Insulated Ferrule 1x 0.75 ... 2.5 mm²

Flexible with Insulated Ferrule 2x 0.75 ... 1.5 mm²

Connecting Capacity Main Circuit:Flexible with Ferrule 1/2x 2.5 ... 10 mm²

Flexible with Ferrule 1/2x 1.5 ... 2.5 mm²

Flexible with Insulated Ferrule 1/2x 1.5 ... 6 mm²

Tightening Torque:Auxiliary Circuit 1 ... 1.2 N·m

Recommended Screw Driver:Main Circuit Pozidriv 2

Power Loss:at Rated Operating Conditions per Pole 2.1 ... 2.8 W

Connecting Capacity Main Circuit UL/CSA:Flexible 1/2x 14-6 AWG

Connecting Capacity Auxiliary Circuit UL/CSA:Flexible 1/2x 18-12 AWG

Tightening Torque UL/CSA:Auxiliary Circuit 9 ... 11 in·lb

Ambient Air Temperature:Operation -25 ... +60 °C

<h3 class="md-block-header-three"><strong class="md-inline-bold">Abb TF42-35 Tor 35A AF09 12 16 26 30 38</strong></h3><p class="md-block-unstyled"> </p><ul class="md-block-unordered-list-item"><li>The TF42-35 thermal overload relay is an economic electromechanical protection device for the main circuit. It offers reliable and fast protection for motors in the event of overload or phase failure. The device has trip class 10. Further features are the temperature compensation, trip contact (NC), signal contact (NO), automatic- or manual reset selectable, trip-free mechanism, STOP function and a trip indication. The overload relays are connected directly to the block contactors. Single mounting kits are available as accessory.</li><li>Product Net Width:45 mm</li><li>Product Net Height:88.3 mm</li><li>Product Net Depth / Length:70.5 mm</li><li>Product Net Weight:0.145 kg  </li><li>Setting Range:29 ... 35 A</li><li>Rated Operational Voltage:Auxiliary Circuit 600 V AC/DC</li><li>Main Circuit 690 V AC</li><li>Main Circuit 600 V DC</li><li>Rated Operational Current (Ie):35 A</li><li>Rated Frequency (f):Auxiliary Circuit 50 Hz</li><li>Auxiliary Circuit 60 Hz</li><li>Auxiliary Circuit DC</li><li>Main Circuit 50 Hz</li><li>Main Circuit 60 Hz</li><li>Rated Impulse Withstand Voltage (Uimp):Auxiliary Circuit 6 kV</li><li>Main Circuit 6 kV</li><li>Rated Insulation Voltage (Ui):690 V</li><li>Number of Poles:3</li><li>Number of Auxiliary Contacts NC:1</li><li>Number of Auxiliary Contacts NO:1</li><li>Number of Protected Poles:3</li><li>Conventional Free-air Thermal Current (Ith):Auxiliary Circuit NC 6 A</li><li>Auxiliary Circuit NO 4 A</li><li>Rated Operational Current AC-15 (Ie):(120 V) NC 3 A</li><li>(120 V) NO 0.5 A</li><li>(240 V) NC 3 A</li><li>(240 V) NO 0.5 A</li><li>(400 V) NC 0.75 A</li><li>(400 V) NO 0.5 A</li><li>(500 V) NC 0.75 A</li><li>(500 V) NO 0.5 A</li><li>Rated Operational Current DC-13 (Ie):(125 V) NC 0.55 A</li><li>(125 V) NO 0.55 A</li><li>(24 V) NC 1.25 A</li><li>(24 V) NO 1.25 A</li><li>(250 V) NC 0.27 A</li><li>(250 V) NO 0.27 A</li><li>(500 V) NC 0.15 A</li><li>(500 V) NO 0.15 A</li><li>(60 V) NC 0.55 A</li><li>(60 V) NO 0.55 A</li><li>Degree of Protection:IP20</li><li>Pollution Degree:3</li><li>Connecting Capacity Auxiliary Circuit:Flexible with Ferrule 1/2x 0.75 ... 2.5 mm²</li><li>Flexible with Insulated Ferrule 1x 0.75 ... 2.5 mm²</li><li>Flexible with Insulated Ferrule 2x 0.75 ... 1.5 mm²</li><li>Flexible 1/2x 0.75 ... 1 mm²</li><li>Flexible 1/2x 1 ... 2.5 mm²</li><li>Rigid 1/2x 0.75 ... 4 mm²</li><li>Connecting Capacity Main Circuit:Flexible with Ferrule 1/2x 2.5 ... 10 mm²</li><li>Flexible with Ferrule 1/2x 1.5 ... 2.5 mm²</li><li>Flexible with Insulated Ferrule 1/2x 1.5 ... 6 mm²</li><li>Flexible 1/2x 2.5 ... 4 mm²</li><li>Flexible 1/2x 4 ... 6 mm²</li><li>Rigid 1/2x 1.5 ... 2.5 mm²</li><li>Rigid 1/2x 2.5 ... 10 mm²</li><li>Tightening Torque:Auxiliary Circuit 1 ... 1.2 N·m</li><li>Main Circuit 2.5 ... 2.7 N·m</li><li>Wire Stripping Length:Auxiliary Circuit 9 mm</li><li>Main Circuit 12 mm</li><li>Recommended Screw Driver:Main Circuit Pozidriv 2</li><li>Power Loss:at Rated Operating Conditions per Pole 2.1 ... 2.8 W</li><li>Suitable For:AF09</li><li>AF12</li><li>AF16</li><li>AF26</li><li>AF30</li><li>AF38</li><li>Standards:IEC/EN 60947-1</li><li>IEC/EN 60947-4-1</li><li>IEC/EN 60947-5-1</li><li>UL 60947-1</li><li>UL 60947-4-1</li><li>Technical UL/CSA</li><li>Maximum Operating Voltage UL/CSA:Main Circuit 600 V AC</li><li>Contact Rating UL/CSA:(NC:) B600</li><li>(NC:) Q600</li><li>(NO:) Q600</li><li>(NO:) D300</li><li>Connecting Capacity Main Circuit UL/CSA:Flexible 1/2x 14-6 AWG</li><li>Stranded 1/2x 14-6 AWG</li><li>Connecting Capacity Auxiliary Circuit UL/CSA:Flexible 1/2x 18-12 AWG</li><li>Stranded 1/2x 18-12 AWG</li><li>Tightening Torque UL/CSA:Auxiliary Circuit 9 ... 11 in·lb</li><li>Main Circuit 22 in·lb</li><li>Environmental</li><li>Ambient Air Temperature:Operation -25 ... +60 °C</li><li>Operation Compensated -25 ... +60 °C</li><li>Storage -50 ... +80 °C</li><li>Unit of measurement : Pcs<br/></li></ul><p class="md-block-unstyled"> </p>

<h3><strong>Abb TF42-35 Tor 35A AF09 12 16 26 30 38</strong></h3>
<p>&nbsp;</p>
<ul>
<li>The TF42-35 thermal overload relay is an economic electromechanical protection device for the main circuit. It offers reliable and fast protection for motors in the event of overload or phase failure. The device has trip class 10. Further features are the temperature compensation, trip contact (NC), signal contact (NO), automatic- or manual reset selectable, trip-free mechanism, STOP function and a trip indication. The overload relays are connected directly to the block contactors. Single mounting kits are available as accessory.</li>
<li>Product Net Width:45 mm</li>
<li>Product Net Height:88.3 mm</li>
<li>Product Net Depth / Length:70.5 mm</li>
<li>Product Net Weight:0.145 kg&nbsp;&nbsp;</li>
<li>Setting Range:29 ... 35 A</li>
<li>Rated Operational Voltage:Auxiliary Circuit 600 V AC/DC</li>
<li>Main Circuit 690 V AC</li>
<li>Main Circuit 600 V DC</li>
<li>Rated Operational Current (Ie):35 A</li>
<li>Rated Frequency (f):Auxiliary Circuit 50 Hz</li>
<li>Auxiliary Circuit 60 Hz</li>
<li>Auxiliary Circuit DC</li>
<li>Main Circuit 50 Hz</li>
<li>Main Circuit 60 Hz</li>
<li>Rated Impulse Withstand Voltage (Uimp):Auxiliary Circuit 6 kV</li>
<li>Main Circuit 6 kV</li>
<li>Rated Insulation Voltage (Ui):690 V</li>
<li>Number of Poles:3</li>
<li>Number of Auxiliary Contacts NC:1</li>
<li>Number of Auxiliary Contacts NO:1</li>
<li>Number of Protected Poles:3</li>
<li>Conventional Free-air Thermal Current (Ith):Auxiliary Circuit NC 6 A</li>
<li>Auxiliary Circuit NO 4 A</li>
<li>Rated Operational Current AC-15 (Ie):(120 V) NC 3 A</li>
<li>(120 V) NO 0.5 A</li>
<li>(240 V) NC 3 A</li>
<li>(240 V) NO 0.5 A</li>
<li>(400 V) NC 0.75 A</li>
<li>(400 V) NO 0.5 A</li>
<li>(500 V) NC 0.75 A</li>
<li>(500 V) NO 0.5 A</li>
<li>Rated Operational Current DC-13 (Ie):(125 V) NC 0.55 A</li>
<li>(125 V) NO 0.55 A</li>
<li>(24 V) NC 1.25 A</li>
<li>(24 V) NO 1.25 A</li>
<li>(250 V) NC 0.27 A</li>
<li>(250 V) NO 0.27 A</li>
<li>(500 V) NC 0.15 A</li>
<li>(500 V) NO 0.15 A</li>
<li>(60 V) NC 0.55 A</li>
<li>(60 V) NO 0.55 A</li>
<li>Degree of Protection:IP20</li>
<li>Pollution Degree:3</li>
<li>Connecting Capacity Auxiliary Circuit:Flexible with Ferrule 1/2x 0.75 ... 2.5 mm²</li>
<li>Flexible with Insulated Ferrule 1x 0.75 ... 2.5 mm²</li>
<li>Flexible with Insulated Ferrule 2x 0.75 ... 1.5 mm²</li>
<li>Flexible 1/2x 0.75 ... 1 mm²</li>
<li>Flexible 1/2x 1 ... 2.5 mm²</li>
<li>Rigid 1/2x 0.75 ... 4 mm²</li>
<li>Connecting Capacity Main Circuit:Flexible with Ferrule 1/2x 2.5 ... 10 mm²</li>
<li>Flexible with Ferrule 1/2x 1.5 ... 2.5 mm²</li>
<li>Flexible with Insulated Ferrule 1/2x 1.5 ... 6 mm²</li>
<li>Flexible 1/2x 2.5 ... 4 mm²</li>
<li>Flexible 1/2x 4 ... 6 mm²</li>
<li>Rigid 1/2x 1.5 ... 2.5 mm²</li>
<li>Rigid 1/2x 2.5 ... 10 mm²</li>
<li>Tightening Torque:Auxiliary Circuit 1 ... 1.2 N·m</li>
<li>Main Circuit 2.5 ... 2.7 N·m</li>
<li>Wire Stripping Length:Auxiliary Circuit 9 mm</li>
<li>Main Circuit 12 mm</li>
<li>Recommended Screw Driver:Main Circuit Pozidriv 2</li>
<li>Power Loss:at Rated Operating Conditions per Pole 2.1 ... 2.8 W</li>
<li>Suitable For:AF09</li>
<li>AF12</li>
<li>AF16</li>
<li>AF26</li>
<li>AF30</li>
<li>AF38</li>
<li>Standards:IEC/EN 60947-1</li>
<li>IEC/EN 60947-4-1</li>
<li>IEC/EN 60947-5-1</li>
<li>UL 60947-1</li>
<li>UL 60947-4-1</li>
<li>Technical UL/CSA</li>
<li>Maximum Operating Voltage UL/CSA:Main Circuit 600 V AC</li>
<li>Contact Rating UL/CSA:(NC:) B600</li>
<li>(NC:) Q600</li>
<li>(NO:) Q600</li>
<li>(NO:) D300</li>
<li>Connecting Capacity Main Circuit UL/CSA:Flexible 1/2x 14-6 AWG</li>
<li>Stranded 1/2x 14-6 AWG</li>
<li>Connecting Capacity Auxiliary Circuit UL/CSA:Flexible 1/2x 18-12 AWG</li>
<li>Stranded 1/2x 18-12 AWG</li>
<li>Tightening Torque UL/CSA:Auxiliary Circuit 9 ... 11 in·lb</li>
<li>Main Circuit 22 in·lb</li>
<li>Environmental</li>
<li>Ambient Air Temperature:Operation -25 ... +60 °C</li>
<li>Operation Compensated -25 ... +60 °C</li>
<li>Storage -50 ... +80 °C</li>
<li>Unit of measurement : Pcs<br>
</li>
</ul>
<p>&nbsp;</p>


Abb TF42-35 Thermal Overload Relay 35A AF09 12 16 26 30 38

abb tf42-35 thermal overload relay 35a af09 12 16 26 30 38 relai kelebihan beban termal relays geganti muatan terma tf42-35热过载继电器35a

abb-tf42-35-thermal-overload-relay-35a-af09-12-16-26-30-38

Schneider Electric LRD332 Tesys Lrd Thermal Overload Relays - 23...32 a - Class 10A

TeSys   LRD thermal overload relay, 32A/690V, thermal setting range 23-32A, tripping   class 10A, for protection of 3-phase motors 15kW@400V. Differential device   with phase failure (loss). It provides a thermal adjustement dial, a   manual-automatic reset selector, a test selector for simulation of a   tripping, reset and stop buttons, a flag indicator and 2 auxiliary contacts   1NO+1NC for fault signalling. Settings are protected by a transparent cover   lockable by sealing.

 Connection by EverLink BTR screw terminals , it connects   directly to the bottom terminals of 3-pole contactors LC1D40A-D80A. Mounting   on DIN rail or screw fixing, separated from the contactor, with use of a   terminal block LAD96560 (to be ordered separately). Multi standards certified   (IEC, UL, CSA, CCC, EAC, Marine), Green Premium compliant (RoHs/Reach).     

<h3 class="md-block-header-three"><strong class="md-inline-bold">Schneider Electric LRD332 Tesys Lrd Thermal Overload Relays - 23...32 a - Class 10A</strong></h3><p class="md-block-unstyled">TeSys   LRD thermal overload relay, 32A/690V, thermal setting range 23-32A, tripping   class 10A, for protection of 3-phase motors 15kW@400V. Differential device   with phase failure (loss). It provides a thermal adjustement dial, a   manual-automatic reset selector, a test selector for simulation of a   tripping, reset and stop buttons, a flag indicator and 2 auxiliary contacts   1NO+1NC for fault signalling. Settings are protected by a transparent cover   lockable by sealing.<br/><br/> Connection by EverLink BTR screw terminals , it connects   directly to the bottom terminals of 3-pole contactors LC1D40A-D80A. Mounting   on DIN rail or screw fixing, separated from the contactor, with use of a   terminal block LAD96560 (to be ordered separately). Multi standards certified   (IEC, UL, CSA, CCC, EAC, Marine), Green Premium compliant (RoHs/Reach).     </p>

<h3><strong>Schneider Electric LRD332 Tesys Lrd Thermal Overload Relays - 23...32 a - Class 10A</strong></h3>
<p>TeSys   LRD thermal overload relay, 32A/690V, thermal setting range 23-32A, tripping   class 10A, for protection of 3-phase motors 15kW@400V. Differential device   with phase failure (loss). It provides a thermal adjustement dial, a   manual-automatic reset selector, a test selector for simulation of a   tripping, reset and stop buttons, a flag indicator and 2 auxiliary contacts   1NO+1NC for fault signalling. Settings are protected by a transparent cover   lockable by sealing.<br>
<br>
 Connection by EverLink BTR screw terminals , it connects   directly to the bottom terminals of 3-pole contactors LC1D40A-D80A. Mounting   on DIN rail or screw fixing, separated from the contactor, with use of a   terminal block LAD96560 (to be ordered separately). Multi standards certified   (IEC, UL, CSA, CCC, EAC, Marine), Green Premium compliant (RoHs/Reach).&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</p>


LRD332

schneider electric lrd332 tesys lrd thermal overload relays 23...32 class 10a relay kelas geganti muatan termal terma electric/施耐德电气 热过载继电器 施耐德电气

schneider-electric-lrd332-tesys-lrd-thermal-overload-relays-23-32-a-class-10a

Schneider Electric LRD3365 Tesys Lrd Thermal Overload Relays - 80...104 a - Class 10A

TeSys   LRD thermal overload relay, 104A/1000V, thermal setting range 80-104A,   tripping class 10A, for protection of 3-phase motors 45kW@400V. Differential   device with phase failure (loss). It provides a thermal adjustement dial, a   manual-automatic reset selector acting also as reset button, a trip test   button for simulation of a tripping, a stop button, a flag indicator and 2   auxiliary contacts 1NO+1NC for fault signalling. Settings are protected by a   transparent cover lockable by sealing. 

Connection by screw clamp terminals,   it connects directly to the bottom terminals of 3-pole contactors LC1D80-D95.   Mounting on DIN rail or screw fixing, separated from the contactor, with use   of a terminal block LA7D3064 (to be ordered separately). 

Multi standards certified   (IEC, UL, CSA, CCC, EAC, ATEX, Marine), Green Premium compliant   (RoHs/Reach).     

<h3 class="md-block-header-three"><strong class="md-inline-bold">Schneider Electric LRD3365 Tesys Lrd Thermal Overload Relays - 80...104 a - Class 10A</strong></h3><p class="md-block-unstyled">TeSys   LRD thermal overload relay, 104A/1000V, thermal setting range 80-104A,   tripping class 10A, for protection of 3-phase motors 45kW@400V. Differential   device with phase failure (loss). It provides a thermal adjustement dial, a   manual-automatic reset selector acting also as reset button, a trip test   button for simulation of a tripping, a stop button, a flag indicator and 2   auxiliary contacts 1NO+1NC for fault signalling. Settings are protected by a   transparent cover lockable by sealing. <br/><br/>Connection by screw clamp terminals,   it connects directly to the bottom terminals of 3-pole contactors LC1D80-D95.   Mounting on DIN rail or screw fixing, separated from the contactor, with use   of a terminal block LA7D3064 (to be ordered separately). <br/><br/>Multi standards certified   (IEC, UL, CSA, CCC, EAC, ATEX, Marine), Green Premium compliant   (RoHs/Reach).     </p>

<h3><strong>Schneider Electric LRD3365 Tesys Lrd Thermal Overload Relays - 80...104 a - Class 10A</strong></h3>
<p>TeSys   LRD thermal overload relay, 104A/1000V, thermal setting range 80-104A,   tripping class 10A, for protection of 3-phase motors 45kW@400V. Differential   device with phase failure (loss). It provides a thermal adjustement dial, a   manual-automatic reset selector acting also as reset button, a trip test   button for simulation of a tripping, a stop button, a flag indicator and 2   auxiliary contacts 1NO+1NC for fault signalling. Settings are protected by a   transparent cover lockable by sealing. <br>
<br>
Connection by screw clamp terminals,   it connects directly to the bottom terminals of 3-pole contactors LC1D80-D95.   Mounting on DIN rail or screw fixing, separated from the contactor, with use   of a terminal block LA7D3064 (to be ordered separately). <br>
<br>
Multi standards certified   (IEC, UL, CSA, CCC, EAC, ATEX, Marine), Green Premium compliant   (RoHs/Reach).&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</p>


LRD3365

schneider electric lrd3365 tesys lrd thermal overload relays 80...104 class 10a relay kelas geganti muatan terma electric/施耐德电气 热过载继电器 施耐德电气

schneider-electric-lrd3365-tesys-lrd-thermal-overload-relays-80-104-a-class-10a

RS Pro

Screw

O Ring

Surface Mount Resistors

Circular Connectors

Bolts

Panel Mount Indicators 

Electrical Wire 

Button Switch

RS Components ETH SG

Schneider Electric LR9D01 LR9D Thermal Overload Relay, 100 → 500 Ma Contact Rating, 300 Mw, 660 (signalling Circuit) V,

schneider electric lr9d01 lr9d thermal overload relay, 100 500ma contact rating, 300 mw, 660 (signalling circuit) v, relai kelebihan beban termal lr9d, peringkat kontak ma, (sirkuit sinyal) relays geganti muatan terma, penilaian sentuhan, (litar isyarat) electric/施耐德电气 热过载继电器，100 触点额定值，300 mw，660（信号电路）v， 施耐德电气

schneider-electric-lr9d01-lr9d-thermal-overload-relay-100-500-ma-contact-rating-300-mw-660-signalling-circuit-v

 Fluke FLUKE-750P01EX Pressure Module, for Use With Fluke 750P Series 0.025bar

The Fluke Pressure Modules is a 750P series pressure modules is used to measure pressure and connect the pressure module to a pressure source or hand pump and then connect the pressure module cable to the calibrator. Apply pressure from the pressure source and it is displayed digitally on the calibrator. The 750P series pressure modules are the ideal pressure modules to enable gage, differential and absolute pressure measurement.

Rugged construction
Broad selection of ranges
No analogue losses or errors
Digital communication to calibrators
Sensor protection in isolated modules
Up to 0.01 percent reference uncertainty

<h3 class="md-block-header-three"><strong class="md-inline-bold"> Fluke FLUKE-750P01EX Pressure Module, for Use With Fluke 750P Series 0.025bar</strong></h3><p class="md-block-unstyled">The Fluke Pressure Modules is a 750P series pressure modules is used to measure pressure and connect the pressure module to a pressure source or hand pump and then connect the pressure module cable to the calibrator. Apply pressure from the pressure source and it is displayed digitally on the calibrator. The 750P series pressure modules are the ideal pressure modules to enable gage, differential and absolute pressure measurement.</p><p class="md-block-unstyled">Rugged construction<br/>Broad selection of ranges<br/>No analogue losses or errors<br/>Digital communication to calibrators<br/>Sensor protection in isolated modules<br/>Up to 0.01 percent reference uncertainty</p>

<h3><strong> Fluke FLUKE-750P01EX Pressure Module, for Use With Fluke 750P Series 0.025bar</strong></h3>
<p>The Fluke Pressure Modules is a 750P series pressure modules is used to measure pressure and connect the pressure module to a pressure source or hand pump and then connect the pressure module cable to the calibrator. Apply pressure from the pressure source and it is displayed digitally on the calibrator. The 750P series pressure modules are the ideal pressure modules to enable gage, differential and absolute pressure measurement.</p>
<p>Rugged construction<br>
Broad selection of ranges<br>
No analogue losses or errors<br>
Digital communication to calibrators<br>
Sensor protection in isolated modules<br>
Up to 0.01 percent reference uncertainty</p>


Fluke Networks

Abus

Molded Case Circuit Breakers - MCCBs

Fluke FLUKE-750P01EX Pressure Module, for Use With Fluke 750P Series 0.025bar

fluke fluke-750p01ex pressure module, use 750p series 0.025bar modul tekanan fluke-750p01ex, untuk digunakan dengan seri 0,025bar calibrators siri fluke/福禄克 压力模块，适用于 系列 福禄克

fluke-fluke-750p01ex-pressure-module-for-use-with-fluke-750p-series-0-025bar

 Fluke 750P24EX Pressure Module, for Use With Fluke 750P Series 1bar

<h3 class="md-block-header-three"><strong class="md-inline-bold"> Fluke 750P24EX Pressure Module, for Use With Fluke 750P Series 1bar</strong></h3><p class="md-block-unstyled">The Fluke Pressure Modules is a 750P series pressure modules is used to measure pressure and connect the pressure module to a pressure source or hand pump and then connect the pressure module cable to the calibrator. Apply pressure from the pressure source and it is displayed digitally on the calibrator. The 750P series pressure modules are the ideal pressure modules to enable gage, differential and absolute pressure measurement.</p><p class="md-block-unstyled">Rugged construction<br/>Broad selection of ranges<br/>No analogue losses or errors<br/>Digital communication to calibrators<br/>Sensor protection in isolated modules<br/>Up to 0.01 percent reference uncertainty</p>

<h3><strong> Fluke 750P24EX Pressure Module, for Use With Fluke 750P Series 1bar</strong></h3>
<p>The Fluke Pressure Modules is a 750P series pressure modules is used to measure pressure and connect the pressure module to a pressure source or hand pump and then connect the pressure module cable to the calibrator. Apply pressure from the pressure source and it is displayed digitally on the calibrator. The 750P series pressure modules are the ideal pressure modules to enable gage, differential and absolute pressure measurement.</p>
<p>Rugged construction<br>
Broad selection of ranges<br>
No analogue losses or errors<br>
Digital communication to calibrators<br>
Sensor protection in isolated modules<br>
Up to 0.01 percent reference uncertainty</p>


Fluke 750P24EX Pressure Module, for Use With Fluke 750P Series 1bar

fluke 750p24ex pressure module, use 750p series 1bar modul tekanan 750p24ex, untuk digunakan dengan seri calibrators siri fluke/福禄克 压力模块，适用于 系列 福禄克

fluke-750p24ex-pressure-module-for-use-with-fluke-750p-series-1bar

 Fluke FLUKE-750P05EX Pressure Module, for Use With Fluke 750P Series 2bar

<h3 class="md-block-header-three"><strong class="md-inline-bold"> Fluke FLUKE-750P05EX Pressure Module, for Use With Fluke 750P Series 2bar</strong></h3><p class="md-block-unstyled">The Fluke Pressure Modules is a 750P series pressure modules is used to measure pressure and connect the pressure module to a pressure source or hand pump and then connect the pressure module cable to the calibrator. Apply pressure from the pressure source and it is displayed digitally on the calibrator. The 750P series pressure modules are the ideal pressure modules to enable gage, differential and absolute pressure measurement.</p><p class="md-block-unstyled">Rugged construction<br/>Broad selection of ranges<br/>No analogue losses or errors<br/>Digital communication to calibrators<br/>Sensor protection in isolated modules<br/>Up to 0.01 percent reference uncertainty</p>

<h3><strong> Fluke FLUKE-750P05EX Pressure Module, for Use With Fluke 750P Series 2bar</strong></h3>
<p>The Fluke Pressure Modules is a 750P series pressure modules is used to measure pressure and connect the pressure module to a pressure source or hand pump and then connect the pressure module cable to the calibrator. Apply pressure from the pressure source and it is displayed digitally on the calibrator. The 750P series pressure modules are the ideal pressure modules to enable gage, differential and absolute pressure measurement.</p>
<p>Rugged construction<br>
Broad selection of ranges<br>
No analogue losses or errors<br>
Digital communication to calibrators<br>
Sensor protection in isolated modules<br>
Up to 0.01 percent reference uncertainty</p>


Fluke FLUKE-750P05EX Pressure Module, for Use With Fluke 750P Series 2bar

fluke fluke-750p05ex pressure module, use 750p series 2bar modul tekanan fluke-750p05ex, untuk digunakan dengan seri calibrators siri fluke/福禄克 压力模块，适用于 系列 福禄克