ATLAS FILTRI

Cisco

HIOKI

KYORITSU

Cleaning

cleaning

Bags, Filters & Accessories

bags-filters-accessories

IT & Electronics

it-electronics

Charger

charger

Test & Measurement

test-measurement

Electrical Power Testing

electrical-power-testing

The FT6380 measures grounding resistance simply by clamping to multiple-grounded ground wires. No auxiliary grounding rod is needed, and there is no need to disconnect the ground wire from the grounding rod. The compact, low-profile sensor can be used to clamp ground wires with ease, and also provide AC current measurement functionality and can measure currents ranging from leakage current on the order of several mA to load currents of up to 60 A. 

 CAT IV 600V  

Key Features 
Earth resistance measurement for multi-grounded systems 
Measure leak current with absolute certainty with highly sensitive 0.01 mA resolution (at 20.00 mA range) 
Measure load current up to 60.0 A range 
Clamp at the narrowest point 

Basic specifications (Accuracy guaranteed for 1 year, Post-adjustment accuracy guaranteed for 1 year)

Measurement principle Instrument has two cores for voltage injection and current measurement. From the defined voltage and measured current, the total circuit loop resistance is calculated
Note: For multi grounded systems only. In a multi-grounded system, the larger the number of grounding poles, the more accurate the measured value.
Earthing resistance 0.20 Ω (0.01 Ω resolution) to 1600 Ω (20 Ω resolution), 10 ranges, Zero suppression: Less than 0.02 Ω, 
Accuracy: ±1.5 % rdg. ±0.02 Ω
AC Current measurement 20.00 mA (0.01 mA resolution) to 60.0 A (0.1 A resolution), 5 ranges, Zero suppression: Less than 0.05 mA, 
Accuracy: ±2.0 % rdg. ±0.05 mA (30 Hz to 400 Hz, True RMS), Crest factor 5.0 or less (for the 60 A range, 1.7 or less)
Max. allowable input 100 A AC continuous, AC 200 A for 2 minutes or shorter (at 50/60 Hz, requires derating at frequency)
Max. rated voltage to earth  600 V AC CAT IV
Memory function 2000 data
Alarm function For resistance measurement and current measurement, Beeps when measured value is less than or greater than threshold
Other functions Data hold, Backlight, Filter, Auto power save
Display Digital LCD, max. 2000 dgt., Display refresh rate: 500 ms (2 times/s)
Waterproof and dustproof IP40 (EN60529) with clamp sensor closed
Communication interface N/A
Power supply LR6 (AA) alkaline battery ×2, Max. rated power: 450 mVA, Continuous use : 35 hr (in-house testing conditions)
Core jaw dia. φ 32 mm (1.26 in)
Dimensions and mass 73 mm (2.87 in) W × 218 mm (8.58 in) H × 43 mm (1.69 in) D, 620 g (21.9 oz)
Accessories Carrying case ×1, Resistance check loop (1 Ω, 25 Ω) ×1, Strap ×1, LR06 (AA) alkaline battery ×2, Instruction manual ×1 

The FT6380 measures grounding resistance simply by clamping to multiple-grounded ground wires. No auxiliary grounding rod is needed, and there is no need to disconnect the ground wire from the grounding rod. The compact, low-profile sensor can be used to clamp ground wires with ease, and also provide AC current measurement functionality and can measure currents ranging from leakage current on the order of several mA to load currents of up to 60 A. CAT IV 600V Key Features Earth resistance measurement for multi-grounded systems Measure leak current with absolute certainty with highly sensitive 0.01 mA resolution (at 20.00 mA range) Measure load current up to 60.0 A range Clamp at the narrowest point Basic specifications (Accuracy guaranteed for 1 year, Post-adjustment accuracy guaranteed for 1 year)Measurement principle Instrument has two cores for voltage injection and current measurement. From the defined voltage and measured current, the total circuit loop resistance is calculated Note: For multi grounded systems only. In a multi-grounded system, the larger the number of grounding poles, the more accurate the measured value. Earthing resistance 0.20 Ω (0.01 Ω resolution) to 1600 Ω (20 Ω resolution), 10 ranges, Zero suppression: Less than 0.02 Ω, Accuracy: ±1.5 % rdg. ±0.02 Ω AC Current measurement 20.00 mA (0.01 mA resolution) to 60.0 A (0.1 A resolution), 5 ranges, Zero suppression: Less than 0.05 mA, Accuracy: ±2.0 % rdg. ±0.05 mA (30 Hz to 400 Hz, True RMS), Crest factor 5.0 or less (for the 60 A range, 1.7 or less) Max. allowable input 100 A AC continuous, AC 200 A for 2 minutes or shorter (at 50/60 Hz, requires derating at frequency) Max. rated voltage to earth 600 V AC CAT IV Memory function 2000 data Alarm function For resistance measurement and current measurement, Beeps when measured value is less than or greater than threshold Other functions Data hold, Backlight, Filter, Auto power save Display Digital LCD, max. 2000 dgt., Display refresh rate: 500 ms (2 times/s) Waterproof and dustproof IP40 (EN60529) with clamp sensor closed Communication interface N/A Power supply LR6 (AA) alkaline battery ×2, Max. rated power: 450 mVA, Continuous use : 35 hr (in-house testing conditions) Core jaw dia. φ 32 mm (1.26 in) Dimensions and mass 73 mm (2.87 in) W × 218 mm (8.58 in) H × 43 mm (1.69 in) D, 620 g (21.9 oz) Accessories Carrying case ×1, Resistance check loop (1 Ω, 25 Ω) ×1, Strap ×1, LR06 (AA) alkaline battery ×2, Instruction manual ×1

The FT6380 measures grounding resistance simply by clamping to multiple-grounded ground wires. No auxiliary grounding rod is needed, and there is no need to disconnect the ground wire from the grounding rod. The compact, low-profile sensor can be used to clamp ground wires with ease, and also provide AC current measurement functionality and can measure currents ranging from leakage current on the order of several mA to load currents of up to 60 A. 
 
 CAT IV 600V&nbsp;&nbsp;
Key Features 
Earth resistance measurement for multi-grounded systems 
Measure leak current with absolute certainty with highly sensitive 0.01 mA resolution (at 20.00 mA range) 
Measure load current up to 60.0 A range 
Clamp at the narrowest point&nbsp;
Basic specifications (Accuracy guaranteed for 1 year, Post-adjustment accuracy guaranteed for 1 year)
Measurement principle Instrument has two cores for voltage injection and current measurement. From the defined voltage and measured current, the total circuit loop resistance is calculated 
Note: For multi grounded systems only. In a multi-grounded system, the larger the number of grounding poles, the more accurate the measured value. 
Earthing resistance 0.20 Ω (0.01 Ω resolution) to 1600 Ω (20 Ω resolution), 10 ranges, Zero suppression: Less than 0.02 Ω, 
Accuracy: ±1.5 % rdg. ±0.02 Ω 
AC Current measurement 20.00 mA (0.01 mA resolution) to 60.0 A (0.1 A resolution), 5 ranges, Zero suppression: Less than 0.05 mA, 
Accuracy: ±2.0 % rdg. ±0.05 mA (30 Hz to 400 Hz, True RMS), Crest factor 5.0 or less (for the 60 A range, 1.7 or less) 
Max. allowable input 100 A AC continuous, AC 200 A for 2 minutes or shorter (at 50/60 Hz, requires derating at frequency) 
Max. rated voltage to earth 600 V AC CAT IV 
Memory function 2000 data 
Alarm function For resistance measurement and current measurement, Beeps when measured value is less than or greater than threshold 
Other functions Data hold, Backlight, Filter, Auto power save 
Display Digital LCD, max. 2000 dgt., Display refresh rate: 500 ms (2 times/s) 
Waterproof and dustproof IP40 (EN60529) with clamp sensor closed 
Communication interface N/A 
Power supply LR6 (AA) alkaline battery ×2, Max. rated power: 450 mVA, Continuous use : 35 hr (in-house testing conditions) 
Core jaw dia. φ 32 mm (1.26 in) 
Dimensions and mass 73 mm (2.87 in) W × 218 mm (8.58 in) H × 43 mm (1.69 in) D, 620 g (21.9 oz) 
Accessories Carrying case ×1, Resistance check loop (1 Ω, 25 Ω) ×1, Strap ×1, LR06 (AA) alkaline battery ×2, Instruction manual ×1&nbsp;

Measurement principle

Earthing resistance

AC Current measurement

Max. allowable input

Max. rated voltage to earth

Memory function

Alarm function

Other functions

Display

Waterproof and dustproof

Communication interface

Power supply

Core jaw dia.

Dimensions and mass

SEEK THERMAL

Light Meters & Imaging

Other Measuring Tools

Humidity & Temperature

Lester

buyerIntroduction

Hioki Clamp on Earth Tester FT6380-50

hioki clamp earth tester ft6380-50 electrical power testing pengujian daya listrik pengapit pada penguji bumi ujian tenaga elektrik hioki/日木 夹地测试仪 电力测试 日木

hioki-clamp-on-earth-tester-ft6380-50

Various useful functions are available on Android devices using Bluetooth communication

• Real time measurements can be transferred, shown and saved on Android device (up to 100 measurements) 
• Saved data includes measurement, GPS location and date & time Easy to check on map "When" and "Where" the measurement was made
• Comparator function on Android device informs when the measured value is lower/higher than the preset value


Earth /Ground resistance and Leakage current measurement functions
• The earth resistance from 0.05 to 1500 Ω can be measured without the auxiliary earth spikes in multi-earthing systems
• True RMS leakage or phase current readings from 0.1mA to 30.0A provides vital additional information in earthing networks
• Filter function offers increased immunity to electrical noise and a Noise mark appears in excessively high noisy environments 

<h3 class="md-block-header-three">Various useful functions are available on Android devices using Bluetooth communication</h3>• Real time measurements can be transferred, shown and saved on Android device (up to 100 measurements) • Saved data includes measurement, GPS location and date &amp; time Easy to check on map &quot;When&quot; and &quot;Where&quot; the measurement was made • Comparator function on Android device informs when the measured value is lower/higher than the preset value <h3 class="md-block-header-three">Earth /Ground resistance and Leakage current measurement functions • The earth resistance from 0.05 to 1500 Ω can be measured without the auxiliary earth spikes in multi-earthing systems • True RMS leakage or phase current readings from 0.1mA to 30.0A provides vital additional information in earthing networks • Filter function offers increased immunity to electrical noise and a Noise mark appears in excessively high noisy environments </h3>

&nbsp;
<h3>Various useful functions are available on Android devices using Bluetooth communication</h3>
• Real time measurements can be transferred, shown and saved on Android device (up to 100 measurements) 
• Saved data includes measurement, GPS location and date &amp; time Easy to check on map "When" and "Where" the measurement was made 
• Comparator function on Android device informs when the measured value is lower/higher than the preset value 

<h3>Earth /Ground resistance and Leakage current measurement functions 
• The earth resistance from 0.05 to 1500 Ω can be measured without the auxiliary earth spikes in multi-earthing systems 
• True RMS leakage or phase current readings from 0.1mA to 30.0A provides vital additional information in earthing networks 
• Filter function offers increased immunity to electrical noise and a Noise mark appears in excessively high noisy environments&nbsp;</h3>

Product Catalogue

Technical Specification

PRO'SKIT

SANWA METER

Others

CHIAYO

RAACO

SHOW

FLUKE

KYORITSU INSTRUMENTS

Multimeters

Microphone

Tools Organizers

Soldering & Brazing Equipment

Motor Rotation/Phase

Toolboxes

Multiple Tools Sets

Flossie Chua

Kyoritsu 4202 Earth Clamp Testers Bluetooth (valid for Singapore Purchases Only)

kyoritsu 4202 earth clamp testers bluetooth (valid singapore purchases only) (bluetooth) electrical power testing pengujian daya listrik ujian tenaga elektrik kyoritsu/协立 共立4202接地钳测试仪（蓝牙） 电力测试 协立

kyoritsu-4202-earth-clamp-testers-bluetooth-valid-for-singapore-purchases-only

1 set of housing with drain funnel (back-flow preventing device)

1 piece of RAH stainless steel net cartridge, filtration at 90 micron

1 piece of stainless steel AISI 302 cartridge spring

Self-cleaning filter with innovative solution for the efficiency of self-cleaning operation, thanks to a newly designed back-wash system in counter-current which grants the highest particle removal from the filter cartridge

Filter housing is tested and certified under the most stringent procedures worldwide, in compliance with DM 25 (Italy), with the sanitary certification ACS (France), EAC/Ghostreghistrazia (Russia) and WaterMark (Australia). Filter housing is made in PET, a highly recyclable plastic, are manufactured with a proprietary procedure saving up to 60% of energy in injection molding compared with standard plastics. That is one of Atlas Filtri commitments to comply with Kyoto Treaty for the reduction of green house gas (CO2) emissions in the atmosphere.

Working Conditions:
Max working pressure:

Non-toxic materials, suitable for drinking water

Breather-valve: body stainless steel, o-ring EPDM

IN/OUT brass threads: CW 617 N brass, ¾”, OT-Brass BSP

Discharge ball-valve: CW 617 N brass nickel plated

#DHES #hardwarestore #hardware #hardwareshop #diyproject #homerenovation #interiordesign #homedecors #hellosingapore #renotalk #hardwarezone #supportlocalsg #supportlocalbusiness #AtlasFiltri #MadeInItaly #RA6000014

Country of origin: ItalyPrice listed includes<ul class="md-block-unordered-list-item"><li>1 set of housing with drain funnel (back-flow preventing device)</li><li>1 piece of RAH stainless steel net cartridge, filtration at 90 micron</li><li>1 piece of stainless steel AISI 302 cartridge spring</li></ul>Self-cleaning filter with innovative solution for the efficiency of self-cleaning operation, thanks to a newly designed back-wash system in counter-current which grants the highest particle removal from the filter cartridge Filter housing is tested and certified under the most stringent procedures worldwide, in compliance with DM 25 (Italy), with the sanitary certification ACS (France), EAC/Ghostreghistrazia (Russia) and WaterMark (Australia). Filter housing is made in PET, a highly recyclable plastic, are manufactured with a proprietary procedure saving up to 60% of energy in injection molding compared with standard plastics. That is one of Atlas Filtri commitments to comply with Kyoto Treaty for the reduction of green house gas (CO2) emissions in the atmosphere.Working Conditions: Max working pressure:<ul class="md-block-unordered-list-item"><li>BSP version: 8 bar</li><li>Min working pressure: 1.8 bar</li><li>Max working temperature: 45°C</li><li>Min working temperature: 4°C</li></ul>Specifications: <ul class="md-block-unordered-list-item"><li>Non-toxic materials, suitable for drinking water</li><li>Head: reinforced polypropylene</li><li>Bowl: PET</li><li>O-ring: EPDM</li><li>Breather-valve: body stainless steel, o-ring EPDM</li><li>IN/OUT brass threads: CW 617 N brass, ¾”, OT-Brass BSP</li><li>Discharge ball-valve: CW 617 N brass nickel plated</li><li>Drain funnel: reinforced polypropylene</li></ul>#DHES #hardwarestore #hardware #hardwareshop #diyproject #homerenovation #interiordesign #homedecors #hellosingapore #renotalk #hardwarezone #supportlocalsg #supportlocalbusiness #AtlasFiltri #MadeInItaly #RA6000014

Country of origin: Italy
Price listed includes
<ul>
<li>1 set of housing with drain funnel (back-flow preventing device)</li>
<li>1 piece of RAH stainless steel net cartridge, filtration at 90 micron</li>
<li>1 piece of stainless steel AISI 302 cartridge spring</li>
</ul>
Self-cleaning filter with innovative solution for the efficiency of self-cleaning operation, thanks to a newly designed back-wash system in counter-current which grants the highest particle removal from the filter cartridge 
 
Filter housing is tested and certified under the most stringent procedures worldwide, in compliance with DM 25 (Italy), with the sanitary certification ACS (France), EAC/Ghostreghistrazia (Russia) and WaterMark (Australia). Filter housing is made in PET, a highly recyclable plastic, are manufactured with a proprietary procedure saving up to 60% of energy in injection molding compared with standard plastics. That is one of Atlas Filtri commitments to comply with Kyoto Treaty for the reduction of green house gas (CO2) emissions in the atmosphere.
Working Conditions: 
Max working pressure:
<ul>
<li>BSP version: 8 bar</li>
<li>Min working pressure: 1.8 bar</li>
<li>Max working temperature: 45°C</li>
<li>Min working temperature: 4°C</li>
</ul>
Specifications:&nbsp;
<ul>
<li>Non-toxic materials, suitable for drinking water</li>
<li>Head: reinforced polypropylene</li>
<li>Bowl: PET</li>
<li>O-ring: EPDM</li>
<li>Breather-valve: body stainless steel, o-ring EPDM</li>
<li>IN/OUT brass threads: CW 617 N brass, ¾”, OT-Brass BSP</li>
<li>Discharge ball-valve: CW 617 N brass nickel plated</li>
<li>Drain funnel: reinforced polypropylene</li>
</ul>
#DHES #hardwarestore #hardware #hardwareshop #diyproject #homerenovation #interiordesign #homedecors #hellosingapore #renotalk #hardwarezone #supportlocalsg #supportlocalbusiness #AtlasFiltri #MadeInItaly #RA6000014

RJ LONDON PAINT

SEALXPERT

BRADY

Cable Ties

Wire Brushes

Cable Carriers

Clearing Drainage Chokes

Painting Tools

Paint Thinners, Solvents & Cleaners

Epoxy

Wall Plugs, Anchors, Fixings & Kits

Stationery Tapes

Scrapers

Keith Pey

Atlas Filtri Hydra ¾” Single Stage Self Cleaning Filter Housing Set RA6000014

atlas filtri hydra ¾” single stage self cleaning filter housing set ra6000014 rumah pembersih mandiri tahap tunggal bags, filters accessories tas, aksesoris perumahan penapis pembersihan diri peringkat beg, aksesori filtri/阿特拉斯滤镜 单级自清洁过滤器外壳套装 包装，过滤器和配件 阿特拉斯滤镜

atlas-filtri-hydra-single-stage-self-cleaning-filter-housing-set-ra6000014

 Cisco 1941 AC Power Supply PWR-1941-AC .

Designed For:
Cisco 1941, 1941 Mobile Wireless, 1941 Secure WAAS Bundle, 1941 Security, 1941 Security Bundle, 1941 SRE Bundle, 1941 WAAS Bundle 

Cisco 1941 AC Power Supply PWR-1941-AC . Device Type: Power supply - internal Input Voltage: 100/240 V (AC) Designed For: Cisco 1941, 1941 Mobile Wireless, 1941 Secure WAAS Bundle, 1941 Security, 1941 Security Bundle, 1941 SRE Bundle, 1941 WAAS Bundle

&nbsp;Cisco 1941 AC Power Supply PWR-1941-AC .
&nbsp;Device Type: Power supply - internal 

Input Voltage: 100/240 V (AC) 

Designed For: 
Cisco 1941, 1941 Mobile Wireless, 1941 Secure WAAS Bundle, 1941 Security, 1941 Security Bundle, 1941 SRE Bundle, 1941 WAAS Bundle&nbsp;