SCHNEIDER ELECTRIC

Electricals

electricals

Monitoring Relays

monitoring-relays

Safety Relays

safety-relays

Catalog Description:CM-PFS.S Three-phase monitoring relay 2c/o, L1-L2-L3=200-500VAC 50/60Hz

Long Description:The CM-PFS.S relay is from the CM three-phase monitors range. This relay operates with a rated control supply voltage / three-phase measuring voltage of 200-500 V AC and has a 2 c/o output with contacts rated at 250 V / 4 A. The CM-PFS.S monitors the phase loss and phase sequence. The corresponding threshold values are fixed. The device offers screw connection technology with double-chamber cage connection terminals.

Rated Control Supply Voltage (Us):(L-L) 200 ... 500 V AC

Rated Frequency (f):Supply Circuit 50/60 Hz

Rated Operational Current AC-12 (Ie):(230 V) 4 A

Rated Operational Current AC-15 (Ie):(230 V) 3 A

Rated Operational Current DC-12 (Ie):(24 V) 4 A

Rated Operational Current DC-13 (Ie):(24 V) 2 A

Rated Impulse Withstand Voltage (Uimp):Input Circuit 6 kV

Rated Insulation Voltage (Ui):Input Circuit / Output Circuit 600 V

Output Circuit 1 / Output Circuit 2 300 V

Short-Circuit Protective Devices:Output Circuit NC - F Type Fuses 6 A

Connecting Capacity:Flexible with Ferrule 1x 0.5 ... 2.5 mm²

Flexible with Ferrule 2x 0.5 ... 1.5 mm²

Flexible with Insulated Ferrule 1x 0.5 ... 2.5 mm²

Flexible with Insulated Ferrule 2x 0.5 ... 1.5 mm²

Mounting on DIN Rail:TH35-15 (35 x 15 mm Mounting Rail) acc. to IEC 60715

TH35-7.5 (35 x 7.5 mm Mounting Rail) acc. to IEC 60715

<h3 class="md-block-header-three">Abb CM-PFS.S Relay Monitoring 3PHASE</h3> <ul class="md-block-unordered-list-item"><li>Extended Product Type:CM-PFS.S</li><li>Product ID:1SVR730824R9300</li><li>EAN:4016779851947</li><li>Catalog Description:CM-PFS.S Three-phase monitoring relay 2c/o, L1-L2-L3=200-500VAC 50/60Hz</li><li>Long Description:The CM-PFS.S relay is from the CM three-phase monitors range. This relay operates with a rated control supply voltage / three-phase measuring voltage of 200-500 V AC and has a 2 c/o output with contacts rated at 250 V / 4 A. The CM-PFS.S monitors the phase loss and phase sequence. The corresponding threshold values are fixed. The device offers screw connection technology with double-chamber cage connection terminals.</li><li>Unit of Measurement : Pcs</li></ul>Technical<ul class="md-block-unordered-list-item"><li>Function:Phase failure detection</li><li>Phase sequence monitoring</li><li>Measuring Range:(L-L) 200 ... 500 V AC</li><li>Time Range:500 ms start-up delay</li><li>Rated Control Supply Voltage (Us):(L-L) 200 ... 500 V AC</li><li>Rated Frequency (f):Supply Circuit 50/60 Hz</li><li>Output:2 c/o (SPDT) contacts</li><li>Terminal Type:Screw Terminals</li><li>Rated Operational Current AC-12 (Ie):(230 V) 4 A</li><li>Rated Operational Current AC-15 (Ie):(230 V) 3 A</li><li>Rated Operational Current DC-12 (Ie):(24 V) 4 A</li><li>Rated Operational Current DC-13 (Ie):(24 V) 2 A</li><li>Minimum Switching Capacity:24 V</li><li>10 mA</li><li>Rated Impulse Withstand Voltage (Uimp):Input Circuit 6 kV</li><li>Output Circuit 4 kV</li><li>Rated Insulation Voltage (Ui):Input Circuit / Output Circuit 600 V</li><li>Output Circuit 1 / Output Circuit 2 300 V</li><li>Degree of Protection:Housing IP50</li><li>Terminals IP20</li><li>Overvoltage Category:III</li><li>Pollution Degree:3</li><li>Short-Circuit Protective Devices:Output Circuit NC - F Type Fuses 6 A</li><li>Output Circuit NO - F Type Fuses 10 A</li><li>Electrical Durability:AC-12 100000 cycle</li><li>Mechanical Durability:30000000 cycle</li><li>Connecting Capacity:Flexible with Ferrule 1x 0.5 ... 2.5 mm²</li><li>Flexible with Ferrule 2x 0.5 ... 1.5 mm²</li><li>Flexible with Insulated Ferrule 1x 0.5 ... 2.5 mm²</li><li>Flexible with Insulated Ferrule 2x 0.5 ... 1.5 mm²</li><li>Flexible 1x 0.5 ... 2.5 mm²</li><li>Flexible 2x 0.5 ... 1.5 mm²</li><li>Rigid 1x 0.5 ... 4 mm²</li><li>Rigid 2x 0.5 ... 2.5 mm²</li><li>Tightening Torque:0.6 ... 0.8 N·m</li><li>Wire Stripping Length:8 mm</li><li>Recommended Screw Driver:0.8 x 4</li><li>4.5</li><li>Pozidriv 1</li><li>Mounting Position:1 ... 6</li><li>Mounting on DIN Rail:TH35-15 (35 x 15 mm Mounting Rail) acc. to IEC 60715</li><li>TH35-7.5 (35 x 7.5 mm Mounting Rail) acc. to IEC 60715</li><li>Standards:CAN/CSA C22.2 No.14</li><li>IEC/EN 63000</li><li>IEC/EN 60255-27</li><li>IEC/EN 61000-6-2</li><li>IEC/EN 61000-6-3</li><li>UL 508</li></ul>

<h3>Abb CM-PFS.S Relay Monitoring 3PHASE</h3>
&nbsp;&nbsp;
<ul>
<li>Extended Product Type:CM-PFS.S</li>
<li>Product ID:1SVR730824R9300</li>
<li>EAN:4016779851947</li>
<li>Catalog Description:CM-PFS.S Three-phase monitoring relay 2c/o, L1-L2-L3=200-500VAC 50/60Hz</li>
<li>Long Description:The CM-PFS.S relay is from the CM three-phase monitors range. This relay operates with a rated control supply voltage / three-phase measuring voltage of 200-500 V AC and has a 2 c/o output with contacts rated at 250 V / 4 A. The CM-PFS.S monitors the phase loss and phase sequence. The corresponding threshold values are fixed. The device offers screw connection technology with double-chamber cage connection terminals.</li>
<li>Unit of Measurement : Pcs</li>
</ul>
Technical
<ul>
<li>Function:Phase failure detection</li>
<li>Phase sequence monitoring</li>
<li>Measuring Range:(L-L) 200 ... 500 V AC</li>
<li>Time Range:500 ms start-up delay</li>
<li>Rated Control Supply Voltage (Us):(L-L) 200 ... 500 V AC</li>
<li>Rated Frequency (f):Supply Circuit 50/60 Hz</li>
<li>Output:2 c/o (SPDT) contacts</li>
<li>Terminal Type:Screw Terminals</li>
<li>Rated Operational Current AC-12 (Ie):(230 V) 4 A</li>
<li>Rated Operational Current AC-15 (Ie):(230 V) 3 A</li>
<li>Rated Operational Current DC-12 (Ie):(24 V) 4 A</li>
<li>Rated Operational Current DC-13 (Ie):(24 V) 2 A</li>
<li>Minimum Switching Capacity:24 V</li>
<li>10 mA</li>
<li>Rated Impulse Withstand Voltage (Uimp):Input Circuit 6 kV</li>
<li>Output Circuit 4 kV</li>
<li>Rated Insulation Voltage (Ui):Input Circuit / Output Circuit 600 V</li>
<li>Output Circuit 1 / Output Circuit 2 300 V</li>
<li>Degree of Protection:Housing IP50</li>
<li>Terminals IP20</li>
<li>Overvoltage Category:III</li>
<li>Pollution Degree:3</li>
<li>Short-Circuit Protective Devices:Output Circuit NC - F Type Fuses 6 A</li>
<li>Output Circuit NO - F Type Fuses 10 A</li>
<li>Electrical Durability:AC-12 100000 cycle</li>
<li>Mechanical Durability:30000000 cycle</li>
<li>Connecting Capacity:Flexible with Ferrule 1x 0.5 ... 2.5 mm²</li>
<li>Flexible with Ferrule 2x 0.5 ... 1.5 mm²</li>
<li>Flexible with Insulated Ferrule 1x 0.5 ... 2.5 mm²</li>
<li>Flexible with Insulated Ferrule 2x 0.5 ... 1.5 mm²</li>
<li>Flexible 1x 0.5 ... 2.5 mm²</li>
<li>Flexible 2x 0.5 ... 1.5 mm²</li>
<li>Rigid 1x 0.5 ... 4 mm²</li>
<li>Rigid 2x 0.5 ... 2.5 mm²</li>
<li>Tightening Torque:0.6 ... 0.8 N·m</li>
<li>Wire Stripping Length:8 mm</li>
<li>Recommended Screw Driver:0.8 x 4</li>
<li>4.5</li>
<li>Pozidriv 1</li>
<li>Mounting Position:1 ... 6</li>
<li>Mounting on DIN Rail:TH35-15 (35 x 15 mm Mounting Rail) acc. to IEC 60715</li>
<li>TH35-7.5 (35 x 7.5 mm Mounting Rail) acc. to IEC 60715</li>
<li>Standards:CAN/CSA C22.2 No.14</li>
<li>IEC/EN 63000</li>
<li>IEC/EN 60255-27</li>
<li>IEC/EN 61000-6-2</li>
<li>IEC/EN 61000-6-3</li>
<li>UL 508</li>
</ul>

Jimmy Foo

Philips

Thomas & Betts

BRADY

Bussmann

Weidmuller

FUJI

Crouse-Hinds

Circuit Breaker

Fuses & Fusegear

Plugs & Connector 

Light Bulbs

Led Lights

Contactors

Junction & Enclosure Box

Other Electrical Accessories

Light Tubes

Doreen Tan

buyerIntroduction

Abb CM-PFS.S Relay Monitoring 3PHASE

abb cm-pfs.s relay monitoring 3phase pemantauan relai relays geganti 3fasa 继电器监控三相 监控继电器

abb-cm-pfs-s-relay-monitoring-3phase

Catalog Description:CM-PVS.41S Three-phase monitoring relay 2c/o, 0,0.1-30s, L1-L2-L3=3x300-500VAC

Long Description:The CM-PVS.41S relay is from the CM three-phase monitors range. This relay operates with a rated control supply voltage / three-phase measuring voltage of 300-500 V AC and has a 2 c/o output with contacts rated at 250 V / 4 A. The CM-PVS.41S monitors the phase parameters over/undervoltage and phase failure. The corresponding threshold values are adjustable. Phase sequence monitoring as well as an ON or OFF tripping delay are selectable. The tripping delay is adjustable over a range of instantaneous to 30 s (0, 0.1-30 s). A sealable transparent cover for protection against unauthorized changes is available as accessory. The device offers screw connection technology with double-chamber cage connection terminals.

0 s or 0.1 ... 30 s tripping delay (ON or OFF)

Rated Control Supply Voltage (Us):(L-L) 300 ... 500 V AC

<h3 class="md-block-header-three">Abb CM-PVS.41S Relay Monitoring 3PHASE</h3> <ul class="md-block-unordered-list-item"><li>Extended Product Type:CM-PVS.41S</li><li>Product ID:1SVR730794R3300</li><li>EAN:4016779851848</li><li>Catalog Description:CM-PVS.41S Three-phase monitoring relay 2c/o, 0,0.1-30s, L1-L2-L3=3x300-500VAC</li><li>Long Description:The CM-PVS.41S relay is from the CM three-phase monitors range. This relay operates with a rated control supply voltage / three-phase measuring voltage of 300-500 V AC and has a 2 c/o output with contacts rated at 250 V / 4 A. The CM-PVS.41S monitors the phase parameters over/undervoltage and phase failure. The corresponding threshold values are adjustable. Phase sequence monitoring as well as an ON or OFF tripping delay are selectable. The tripping delay is adjustable over a range of instantaneous to 30 s (0, 0.1-30 s). A sealable transparent cover for protection against unauthorized changes is available as accessory. The device offers screw connection technology with double-chamber cage connection terminals.</li><li>Unit of Measurement : Pcs</li></ul>Technical<ul class="md-block-unordered-list-item"><li>Function:Phase failure detection</li><li>Phase sequence monitoring</li><li>Over- and undervoltage monitoring</li><li>Measuring Range:(L-L) 300 ... 500 V AC</li><li>Time Range:200 ms start-up delay</li><li>0 s or 0.1 ... 30 s tripping delay (ON or OFF)</li><li>Rated Control Supply Voltage (Us):(L-L) 300 ... 500 V AC</li><li>Rated Frequency (f):Supply Circuit 50/60 Hz</li><li>Output:2 c/o (SPDT) contacts</li><li>Terminal Type:Screw Terminals</li><li>Rated Operational Current AC-12 (Ie):(230 V) 4 A</li><li>Rated Operational Current AC-15 (Ie):(230 V) 3 A</li><li>Rated Operational Current DC-12 (Ie):(24 V) 4 A</li><li>Rated Operational Current DC-13 (Ie):(24 V) 2 A</li><li>Minimum Switching Capacity:24 V</li><li>10 mA</li><li>Rated Impulse Withstand Voltage (Uimp):Input Circuit 6 kV</li><li>Output Circuit 4 kV</li><li>Rated Insulation Voltage (Ui):Input Circuit / Output Circuit 600 V</li><li>Output Circuit 1 / Output Circuit 2 300 V</li><li>Degree of Protection:Housing IP50</li><li>Terminals IP20</li><li>Overvoltage Category:III</li><li>Pollution Degree:3</li><li>Short-Circuit Protective Devices:Output Circuit NC - F Type Fuses 6 A</li><li>Output Circuit NO - F Type Fuses 10 A</li><li>Electrical Durability:AC-12 100000 cycle</li><li>Mechanical Durability:30000000 cycle</li><li>Connecting Capacity:Flexible with Ferrule 1x 0.5 ... 2.5 mm²</li><li>Flexible with Ferrule 2x 0.5 ... 1.5 mm²</li><li>Flexible with Insulated Ferrule 1x 0.5 ... 2.5 mm²</li><li>Flexible with Insulated Ferrule 2x 0.5 ... 1.5 mm²</li><li>Flexible 1x 0.5 ... 2.5 mm²</li><li>Flexible 2x 0.5 ... 1.5 mm²</li><li>Rigid 1x 0.5 ... 4 mm²</li><li>Rigid 2x 0.5 ... 2.5 mm²</li><li>Tightening Torque:0.6 ... 0.8 N·m</li><li>Wire Stripping Length:8 mm</li><li>Recommended Screw Driver:0.8 x 4</li><li>4.5</li><li>Pozidriv 1</li><li>Mounting Position:1 ... 6</li><li>Mounting on DIN Rail:TH35-15 (35 x 15 mm Mounting Rail) acc. to IEC 60715</li><li>TH35-7.5 (35 x 7.5 mm Mounting Rail) acc. to IEC 60715</li><li>Standards:CAN/CSA C22.2 No.14</li><li>IEC/EN 63000</li><li>IEC/EN 60255-27</li><li>IEC/EN 61000-6-2</li><li>IEC/EN 61000-6-3</li><li>UL 508</li></ul>

<h3>Abb CM-PVS.41S Relay Monitoring 3PHASE</h3>
&nbsp;&nbsp;
<ul>
<li>Extended Product Type:CM-PVS.41S</li>
<li>Product ID:1SVR730794R3300</li>
<li>EAN:4016779851848</li>
<li>Catalog Description:CM-PVS.41S Three-phase monitoring relay 2c/o, 0,0.1-30s, L1-L2-L3=3x300-500VAC</li>
<li>Long Description:The CM-PVS.41S relay is from the CM three-phase monitors range. This relay operates with a rated control supply voltage / three-phase measuring voltage of 300-500 V AC and has a 2 c/o output with contacts rated at 250 V / 4 A. The CM-PVS.41S monitors the phase parameters over/undervoltage and phase failure. The corresponding threshold values are adjustable. Phase sequence monitoring as well as an ON or OFF tripping delay are selectable. The tripping delay is adjustable over a range of instantaneous to 30 s (0, 0.1-30 s). A sealable transparent cover for protection against unauthorized changes is available as accessory. The device offers screw connection technology with double-chamber cage connection terminals.</li>
<li>Unit of Measurement : Pcs</li>
</ul>
Technical
<ul>
<li>Function:Phase failure detection</li>
<li>Phase sequence monitoring</li>
<li>Over- and undervoltage monitoring</li>
<li>Measuring Range:(L-L) 300 ... 500 V AC</li>
<li>Time Range:200 ms start-up delay</li>
<li>0 s or 0.1 ... 30 s tripping delay (ON or OFF)</li>
<li>Rated Control Supply Voltage (Us):(L-L) 300 ... 500 V AC</li>
<li>Rated Frequency (f):Supply Circuit 50/60 Hz</li>
<li>Output:2 c/o (SPDT) contacts</li>
<li>Terminal Type:Screw Terminals</li>
<li>Rated Operational Current AC-12 (Ie):(230 V) 4 A</li>
<li>Rated Operational Current AC-15 (Ie):(230 V) 3 A</li>
<li>Rated Operational Current DC-12 (Ie):(24 V) 4 A</li>
<li>Rated Operational Current DC-13 (Ie):(24 V) 2 A</li>
<li>Minimum Switching Capacity:24 V</li>
<li>10 mA</li>
<li>Rated Impulse Withstand Voltage (Uimp):Input Circuit 6 kV</li>
<li>Output Circuit 4 kV</li>
<li>Rated Insulation Voltage (Ui):Input Circuit / Output Circuit 600 V</li>
<li>Output Circuit 1 / Output Circuit 2 300 V</li>
<li>Degree of Protection:Housing IP50</li>
<li>Terminals IP20</li>
<li>Overvoltage Category:III</li>
<li>Pollution Degree:3</li>
<li>Short-Circuit Protective Devices:Output Circuit NC - F Type Fuses 6 A</li>
<li>Output Circuit NO - F Type Fuses 10 A</li>
<li>Electrical Durability:AC-12 100000 cycle</li>
<li>Mechanical Durability:30000000 cycle</li>
<li>Connecting Capacity:Flexible with Ferrule 1x 0.5 ... 2.5 mm²</li>
<li>Flexible with Ferrule 2x 0.5 ... 1.5 mm²</li>
<li>Flexible with Insulated Ferrule 1x 0.5 ... 2.5 mm²</li>
<li>Flexible with Insulated Ferrule 2x 0.5 ... 1.5 mm²</li>
<li>Flexible 1x 0.5 ... 2.5 mm²</li>
<li>Flexible 2x 0.5 ... 1.5 mm²</li>
<li>Rigid 1x 0.5 ... 4 mm²</li>
<li>Rigid 2x 0.5 ... 2.5 mm²</li>
<li>Tightening Torque:0.6 ... 0.8 N·m</li>
<li>Wire Stripping Length:8 mm</li>
<li>Recommended Screw Driver:0.8 x 4</li>
<li>4.5</li>
<li>Pozidriv 1</li>
<li>Mounting Position:1 ... 6</li>
<li>Mounting on DIN Rail:TH35-15 (35 x 15 mm Mounting Rail) acc. to IEC 60715</li>
<li>TH35-7.5 (35 x 7.5 mm Mounting Rail) acc. to IEC 60715</li>
<li>Standards:CAN/CSA C22.2 No.14</li>
<li>IEC/EN 63000</li>
<li>IEC/EN 60255-27</li>
<li>IEC/EN 61000-6-2</li>
<li>IEC/EN 61000-6-3</li>
<li>UL 508</li>
</ul>

Abb CM-PVS.41S Relay Monitoring 3PHASE

abb cm-pvs.41s relay monitoring 3phase pemantauan relai relays geganti 3fasa 继电器监控三相 监控继电器

abb-cm-pvs-41s-relay-monitoring-3phase

Abb CM-PAS.31P Relay Monitoring 3PHASE 3X160-300VAC

Catalog Description:CM-PAS.31P Three-phase monitoring relay 2c/o, 0,0.1-30s, L1-L2-L3=3x160-300VAC

Long Description:The CM-PAS.31P relay is from the CM three-phase monitors range. This relay operates with a rated control supply voltage / three-phase measuring voltage of 160-300 V AC and has a 2 c/o output with contacts rated at 250 V / 4 A. The CM-PAS.31P monitors the phase parameters phase failure, phase sequence and phase unbalance. An ON-delay is adjustable over a range of instantaneous to 30 s (0, 0.1-30 s). A sealable transparent cover for protection against unauthorized changes is available as accessory. The device offers maintenance free Easy Connect Technology with push-in terminals.

Rated Control Supply Voltage (Us):(L-L) 160 ... 300 V AC

Connecting Capacity:Flexible with Ferrule 2x 0.5 ... 1.5 mm²

<h3 class="md-block-header-three">Abb CM-PAS.31P Relay Monitoring 3PHASE 3X160-300VAC</h3> <ul class="md-block-unordered-list-item"><li>Extended Product Type:CM-PAS.31P</li><li>Product ID:1SVR740774R1300</li><li>EAN:4016779851978</li><li>Catalog Description:CM-PAS.31P Three-phase monitoring relay 2c/o, 0,0.1-30s, L1-L2-L3=3x160-300VAC</li><li>Long Description:The CM-PAS.31P relay is from the CM three-phase monitors range. This relay operates with a rated control supply voltage / three-phase measuring voltage of 160-300 V AC and has a 2 c/o output with contacts rated at 250 V / 4 A. The CM-PAS.31P monitors the phase parameters phase failure, phase sequence and phase unbalance. An ON-delay is adjustable over a range of instantaneous to 30 s (0, 0.1-30 s). A sealable transparent cover for protection against unauthorized changes is available as accessory. The device offers maintenance free Easy Connect Technology with push-in terminals.</li><li>Unit of Measurement : Pcs</li></ul>Technical<ul class="md-block-unordered-list-item"><li>Function:Phase failure detection</li><li>Phase sequence monitoring</li><li>Phase unbalance detection</li><li>Measuring Range:(L-L) 160 ... 300 V AC</li><li>Time Range:200 ms start-up delay</li><li>0 s or 0.1 ... 30 s tripping delay (ON)</li><li>Rated Control Supply Voltage (Us):(L-L) 160 ... 300 V AC</li><li>Rated Frequency (f):Supply Circuit 50/60 Hz</li><li>Output:2 c/o (SPDT) contacts</li><li>Terminal Type:Screwless Terminals</li><li>Rated Operational Current AC-12 (Ie):(230 V) 4 A</li><li>Rated Operational Current AC-15 (Ie):(230 V) 3 A</li><li>Rated Operational Current DC-12 (Ie):(24 V) 4 A</li><li>Rated Operational Current DC-13 (Ie):(24 V) 2 A</li><li>Minimum Switching Capacity:24 V</li><li>10 mA</li><li>Rated Impulse Withstand Voltage (Uimp):Input Circuit 6 kV</li><li>Output Circuit 4 kV</li><li>Rated Insulation Voltage (Ui):Input Circuit / Output Circuit 600 V</li><li>Output Circuit 1 / Output Circuit 2 300 V</li><li>Degree of Protection:Housing IP50</li><li>Terminals IP20</li><li>Overvoltage Category:III</li><li>Pollution Degree:3</li><li>Short-Circuit Protective Devices:Output Circuit NC - F Type Fuses 6 A</li><li>Output Circuit NO - F Type Fuses 10 A</li><li>Electrical Durability:AC-12 100000 cycle</li><li>Mechanical Durability:30000000 cycle</li><li>Connecting Capacity:Flexible with Ferrule 2x 0.5 ... 1.5 mm²</li><li>Flexible with Insulated Ferrule 2x 0.5 ... 1.5 mm²</li><li>Flexible 2x 0.5 ... 1.5 mm²</li><li>Rigid 2x 0.5 ... 1.5 mm²</li><li>Wire Stripping Length:8 mm</li><li>Mounting Position:1 ... 6</li><li>Mounting on DIN Rail:TH35-15 (35 x 15 mm Mounting Rail) acc. to IEC 60715</li><li>TH35-7.5 (35 x 7.5 mm Mounting Rail) acc. to IEC 60715</li><li>Standards:CAN/CSA C22.2 No.14</li><li>IEC/EN 63000</li><li>IEC/EN 60255-27</li><li>IEC/EN 61000-6-2</li><li>IEC/EN 61000-6-3</li><li>UL 508</li></ul>

<h3>Abb CM-PAS.31P Relay Monitoring 3PHASE 3X160-300VAC</h3>
&nbsp;&nbsp;
<ul>
<li>Extended Product Type:CM-PAS.31P</li>
<li>Product ID:1SVR740774R1300</li>
<li>EAN:4016779851978</li>
<li>Catalog Description:CM-PAS.31P Three-phase monitoring relay 2c/o, 0,0.1-30s, L1-L2-L3=3x160-300VAC</li>
<li>Long Description:The CM-PAS.31P relay is from the CM three-phase monitors range. This relay operates with a rated control supply voltage / three-phase measuring voltage of 160-300 V AC and has a 2 c/o output with contacts rated at 250 V / 4 A. The CM-PAS.31P monitors the phase parameters phase failure, phase sequence and phase unbalance. An ON-delay is adjustable over a range of instantaneous to 30 s (0, 0.1-30 s). A sealable transparent cover for protection against unauthorized changes is available as accessory. The device offers maintenance free Easy Connect Technology with push-in terminals.</li>
<li>Unit of Measurement : Pcs</li>
</ul>
Technical
<ul>
<li>Function:Phase failure detection</li>
<li>Phase sequence monitoring</li>
<li>Phase unbalance detection</li>
<li>Measuring Range:(L-L) 160 ... 300 V AC</li>
<li>Time Range:200 ms start-up delay</li>
<li>0 s or 0.1 ... 30 s tripping delay (ON)</li>
<li>Rated Control Supply Voltage (Us):(L-L) 160 ... 300 V AC</li>
<li>Rated Frequency (f):Supply Circuit 50/60 Hz</li>
<li>Output:2 c/o (SPDT) contacts</li>
<li>Terminal Type:Screwless Terminals</li>
<li>Rated Operational Current AC-12 (Ie):(230 V) 4 A</li>
<li>Rated Operational Current AC-15 (Ie):(230 V) 3 A</li>
<li>Rated Operational Current DC-12 (Ie):(24 V) 4 A</li>
<li>Rated Operational Current DC-13 (Ie):(24 V) 2 A</li>
<li>Minimum Switching Capacity:24 V</li>
<li>10 mA</li>
<li>Rated Impulse Withstand Voltage (Uimp):Input Circuit 6 kV</li>
<li>Output Circuit 4 kV</li>
<li>Rated Insulation Voltage (Ui):Input Circuit / Output Circuit 600 V</li>
<li>Output Circuit 1 / Output Circuit 2 300 V</li>
<li>Degree of Protection:Housing IP50</li>
<li>Terminals IP20</li>
<li>Overvoltage Category:III</li>
<li>Pollution Degree:3</li>
<li>Short-Circuit Protective Devices:Output Circuit NC - F Type Fuses 6 A</li>
<li>Output Circuit NO - F Type Fuses 10 A</li>
<li>Electrical Durability:AC-12 100000 cycle</li>
<li>Mechanical Durability:30000000 cycle</li>
<li>Connecting Capacity:Flexible with Ferrule 2x 0.5 ... 1.5 mm²</li>
<li>Flexible with Insulated Ferrule 2x 0.5 ... 1.5 mm²</li>
<li>Flexible 2x 0.5 ... 1.5 mm²</li>
<li>Rigid 2x 0.5 ... 1.5 mm²</li>
<li>Wire Stripping Length:8 mm</li>
<li>Mounting Position:1 ... 6</li>
<li>Mounting on DIN Rail:TH35-15 (35 x 15 mm Mounting Rail) acc. to IEC 60715</li>
<li>TH35-7.5 (35 x 7.5 mm Mounting Rail) acc. to IEC 60715</li>
<li>Standards:CAN/CSA C22.2 No.14</li>
<li>IEC/EN 63000</li>
<li>IEC/EN 60255-27</li>
<li>IEC/EN 61000-6-2</li>
<li>IEC/EN 61000-6-3</li>
<li>UL 508</li>
</ul>

Pilot Lights

abb cm-pas.31p relay monitoring 3phase 3x160-300vac pemantauan relai relays geganti 3fasa 继电器监控三相 监控继电器

abb-cm-pas-31p-relay-monitoring-3phase-3x160-300vac

Abb CR-M230AC4L Relay Control 250V 6A 230VAC Led

Catalog Description:CR-M230AC4L Pluggable interface relay 4c/o, A1-A2=230VAC, 250V/6A, LED

Long Description:The CR-M230AC4L pluggable interface relay is a miniature relay, which is to be plugged into a suitable ABB CR-M socket. Plugged into a socket, the combination of relay and socket may be seemlessly snap-on mounted onto a DIN Rail.This relay operates with a 230 V AC rated control supply voltage and has a 4 c/o (SPDT) output with contacts rated at 250 V / 6A, enabling the possibility of switching multiple circuits with a single input signal. The relay has an integrated test button which is used for the manual actuation of the relay by locking it's output contacts. The test button facilitates easy testing and commissioning. The relay also has an integrated LED, which provides the visual indication of the energization of the relay coil. Standard sockets, logic sockets, pluggable function modules, holders and markers are available as accessories. Standard sockets, logical sockets, pluggable function modules, holder and marker are available as accessories.

Function:Pluggable miniature interface relay CR-M

Rated Control Supply Voltage (Us):230 V AC

Rated Operational Current AC-12 (Ie):(230 V) 6 A

Rated Operational Current AC-15 (Ie):(120 V) 1.5 A

Rated Operational Current DC-12 (Ie):(24 V) 6 A

<h3 class="md-block-header-three">Abb CR-M230AC4L Relay Control 250V 6A 230VAC Led</h3> <ul class="md-block-unordered-list-item"><li>Extended Product Type:CR-M230AC4L</li><li>Product ID:1SVR405613R3100</li><li>EAN:4013614497766</li><li>Catalog Description:CR-M230AC4L Pluggable interface relay 4c/o, A1-A2=230VAC, 250V/6A, LED</li><li>Long Description:The CR-M230AC4L pluggable interface relay is a miniature relay, which is to be plugged into a suitable ABB CR-M socket. Plugged into a socket, the combination of relay and socket may be seemlessly snap-on mounted onto a DIN Rail.This relay operates with a 230 V AC rated control supply voltage and has a 4 c/o (SPDT) output with contacts rated at 250 V / 6A, enabling the possibility of switching multiple circuits with a single input signal. The relay has an integrated test button which is used for the manual actuation of the relay by locking it&#x27;s output contacts. The test button facilitates easy testing and commissioning. The relay also has an integrated LED, which provides the visual indication of the energization of the relay coil. Standard sockets, logic sockets, pluggable function modules, holders and markers are available as accessories. Standard sockets, logical sockets, pluggable function modules, holder and marker are available as accessories.</li><li>Unit of Measurement : PCS</li></ul>Technical<ul class="md-block-unordered-list-item"><li>Function:Pluggable miniature interface relay CR-M</li><li>Sub-Function:Relay with built in LED</li><li>Rated Control Supply Voltage (Us):230 V AC</li><li>Rated Operational Voltage:250 V AC</li><li>Rated Frequency (f):50 / 60 Hz</li><li>Output:4 c/o (SPDT) contacts</li><li>Output Signal:250 V / 6 A</li><li>Terminal Type:Flat-Pin Connections</li><li>Rated Operational Current AC-12 (Ie):(230 V) 6 A</li><li>Rated Operational Current AC-15 (Ie):(120 V) 1.5 A</li><li>(230 V) 1 A</li><li>Rated Operational Current DC-12 (Ie):(24 V) 6 A</li><li>Rated Operational Current DC-13 (Ie):(24 V) 2 A</li><li>(250 V) 0.1 A</li><li>Rated Insulation Voltage (Ui):250 V</li><li>Degree of Protection:IP40</li><li>Mounting Position:1</li><li>Standards:CAN/CSA C22.2 No.14</li><li>IEC/EN 63000</li><li>IEC/EN 61810-1</li><li>UL 508</li></ul>

<h3>Abb CR-M230AC4L Relay Control 250V 6A 230VAC Led</h3>
&nbsp;&nbsp;
<ul>
<li>Extended Product Type:CR-M230AC4L</li>
<li>Product ID:1SVR405613R3100</li>
<li>EAN:4013614497766</li>
<li>Catalog Description:CR-M230AC4L Pluggable interface relay 4c/o, A1-A2=230VAC, 250V/6A, LED</li>
<li>Long Description:The CR-M230AC4L pluggable interface relay is a miniature relay, which is to be plugged into a suitable ABB CR-M socket. Plugged into a socket, the combination of relay and socket may be seemlessly snap-on mounted onto a DIN Rail.This relay operates with a 230 V AC rated control supply voltage and has a 4 c/o (SPDT) output with contacts rated at 250 V / 6A, enabling the possibility of switching multiple circuits with a single input signal. The relay has an integrated test button which is used for the manual actuation of the relay by locking it's output contacts. The test button facilitates easy testing and commissioning. The relay also has an integrated LED, which provides the visual indication of the energization of the relay coil. Standard sockets, logic sockets, pluggable function modules, holders and markers are available as accessories. Standard sockets, logical sockets, pluggable function modules, holder and marker are available as accessories.</li>
<li>Unit of Measurement : PCS</li>
</ul>
Technical
<ul>
<li>Function:Pluggable miniature interface relay CR-M</li>
<li>Sub-Function:Relay with built in LED</li>
<li>Rated Control Supply Voltage (Us):230 V AC</li>
<li>Rated Operational Voltage:250 V AC</li>
<li>Rated Frequency (f):50 / 60 Hz</li>
<li>Output:4 c/o (SPDT) contacts</li>
<li>Output Signal:250 V / 6 A</li>
<li>Terminal Type:Flat-Pin Connections</li>
<li>Rated Operational Current AC-12 (Ie):(230 V) 6 A</li>
<li>Rated Operational Current AC-15 (Ie):(120 V) 1.5 A</li>
<li>(230 V) 1 A</li>
<li>Rated Operational Current DC-12 (Ie):(24 V) 6 A</li>
<li>Rated Operational Current DC-13 (Ie):(24 V) 2 A</li>
<li>(250 V) 0.1 A</li>
<li>Rated Insulation Voltage (Ui):250 V</li>
<li>Degree of Protection:IP40</li>
<li>Mounting Position:1</li>
<li>Standards:CAN/CSA C22.2 No.14</li>
<li>IEC/EN 63000</li>
<li>IEC/EN 61810-1</li>
<li>UL 508</li>
</ul>

abb cr-m230ac4l relay control 250v 6a 230vac led kontrol relai monitoring relays pemantauan kawalan geganti dipimpin 继电器控制 监控继电器

abb-cr-m230ac4l-relay-control-250v-6a-230vac-led

Schneider Electric XPSCM1144 single-beam photo-electric Sensors - Module XPS-CM

This XPSCM safety module is for monitoring of single-beam photo-electric sensors and has a built-in "muting" function. It meets the requirements of PL c/Category 2 conforming to EN/ISO 13849-1.and SILCL1 conforming to EN/IEC 61508 and EN/IEC 62061. Used in conjunction with XU2S single-beam photo-electric sensors (periodically tested), it establishes a category 2 light curtain conforming to IEC/EN 61496 parts 1 and 2.

Range of Product: Telemecanique Safety Light Curtains XUSL

Safety Module Application: For monitoring of single beam photo-electric sensor

Can reach Category 2 with the appropriate control system and correctly wired conforming to EN/ISO 13849-1

Can reach SILCL 1 with the appropriate control system and correctly wired conforming to EN/IEC 62061

Can reach PL = c with the appropriate control system and correctly wired conforming to EN/ISO 13849-1

MTTFd (Mean Time To Dangerous Failure) = 16.6 years conforming to EN/ISO 13849-1

DC (Diagnostic Coverage) = 95.5% conforming to EN/ISO 13849-1

PFH (Probability of Dangerous Failure per Hour) = 3.12E-7 1/h conforming to EN/IEC 61508

PFHd (Probability of Dangerous Failure per Hour) = 3.12E-7 1/h conforming to EN/IEC 62061

24 V DC (terminals U+, U-) for muting function

Connections - Terminals: Various captive screw clamp terminals for different cable types and configurations

Output Type: Relay 2 NO (Normally Open) (13-14, 23-24), volt-free

Rated Supply Voltage ([Us]): 24 V DC with a tolerance of -20% to +20%

3 s (+/- 20 %) for the activation of the MA/MB muting signal

1.5 A at 24 V (DC-13) time constant: 50 ms for relay output

4 A gG for relay output conforming to DIN VDE 0660 part 200

4 A gG for relay output conforming to EN/IEC 60947-5-1

6 A fast blow for relay output conforming to DIN VDE 0660 part 200

6 A fast blow for relay output conforming to EN/IEC 60947-5-1

1 LED for electronic internal fuse status

1 incandescent lamp for muting power consumption: 4…6.5 W

300 V (pollution degree 2) conforming to DIN VDE 0110 parts 1 and 2

300 V (pollution degree 2) conforming to EN/IEC 60947-5-1

4 kV overvoltage category III conforming to DIN VDE 0110 parts 1 and 2

4 kV overvoltage category III conforming to EN/IEC 60947-5-1

<h3 class="md-block-header-three">Schneider Electric XPSCM1144 single-beam photo-electric Sensors - Module XPS-CM</h3>This XPSCM safety module is for monitoring of single-beam photo-electric sensors and has a built-in &quot;muting&quot; function. It meets the requirements of PL c/Category 2 conforming to EN/ISO 13849-1.and SILCL1 conforming to EN/IEC 61508 and EN/IEC 62061. Used in conjunction with XU2S single-beam photo-electric sensors (periodically tested), it establishes a category 2 light curtain conforming to IEC/EN 61496 parts 1 and 2.Main<ul class="md-block-unordered-list-item"><li>Range of Product: Telemecanique Safety Light Curtains XUSL</li><li>Product or Component Type: Safety Module</li><li>Safety Module Name: XPSCM</li><li>Safety Module Application: For monitoring of single beam photo-electric sensor</li><li>Function of Module: Built-in muting</li><li>Safety Level:</li><ul class="md-block-unordered-list-item"><li>Can reach Category 2 with the appropriate control system and correctly wired conforming to EN/ISO 13849-1</li><li>Can reach SILCL 1 with the appropriate control system and correctly wired conforming to EN/IEC 62061</li><li>Can reach PL = c with the appropriate control system and correctly wired conforming to EN/ISO 13849-1</li></ul><li>Safety Reliability Data:</li><ul class="md-block-unordered-list-item"><li>MTTFd (Mean Time To Dangerous Failure) = 16.6 years conforming to EN/ISO 13849-1</li><li>DC (Diagnostic Coverage) = 95.5% conforming to EN/ISO 13849-1</li><li>PFH (Probability of Dangerous Failure per Hour) = 3.12E-7 1/h conforming to EN/IEC 61508</li><li>PFHd (Probability of Dangerous Failure per Hour) = 3.12E-7 1/h conforming to EN/IEC 62061</li></ul><li>Number of Inputs:</li><ul class="md-block-unordered-list-item"><li>2 (terminals MA, MB) for muting function</li><li>4 (terminals Z1, Z2, Z3, Z4) for sensor</li></ul><li>Input Voltage:</li><ul class="md-block-unordered-list-item"><li>24 V DC for sensor</li><li>24 V DC (terminals U+, U-) for muting function</li></ul><li>Input Compatibility:</li><ul class="md-block-unordered-list-item"><li>XC limit switch for muting function</li><li>XU2M18PP340... for muting function</li><li>XU2S18PP340... (infrared) for sensor</li><li>XU9M18PP340... for muting function</li></ul><li>Connections - Terminals: Various captive screw clamp terminals for different cable types and configurations</li><li>Output Type: Relay 2 NO (Normally Open) (13-14, 23-24), volt-free</li><li>Number of Additional Circuits: 0</li><li>Rated Supply Voltage ([Us]): 24 V DC with a tolerance of -20% to +20%</li></ul>Complimentary<ul class="md-block-unordered-list-item"><li>Sensor Power Supply:</li><ul class="md-block-unordered-list-item"><li>U+, U-: 24 V DC</li></ul><li>Maximum Supply Current for Sensors:</li><ul class="md-block-unordered-list-item"><li>200 mA</li></ul><li>Input Current:</li><ul class="md-block-unordered-list-item"><li>200 mA for muting function</li></ul><li>Synchronization Time Between Inputs:</li><ul class="md-block-unordered-list-item"><li>3 s (+/- 20 %) for the activation of the MA/MB muting signal</li></ul><li>Muting Maximum Duration:</li><ul class="md-block-unordered-list-item"><li>60 s (-10...30 %)</li></ul><li>Maximum Line Resistance:</li><ul class="md-block-unordered-list-item"><li>10 Ohm for sensor power supply</li></ul><li>Breaking Capacity:</li><ul class="md-block-unordered-list-item"><li>180 VA holding AC-15 C300 relay output</li><li>1800 VA inrush AC-15 C300 relay output</li><li>20 mA at 24 V for solid-state output</li><li>1.5 A at 24 V (DC-13) time constant: 50 ms for relay output</li></ul><li>Associated Fuse Rating:</li><ul class="md-block-unordered-list-item"><li>4 A gG for relay output conforming to DIN VDE 0660 part 200</li><li>4 A gG for relay output conforming to EN/IEC 60947-5-1</li><li>6 A fast blow for relay output conforming to DIN VDE 0660 part 200</li><li>6 A fast blow for relay output conforming to EN/IEC 60947-5-1</li></ul><li>Minimum Output Current:</li><ul class="md-block-unordered-list-item"><li>10 mA for relay output</li></ul><li>Minimum Output Voltage:</li><ul class="md-block-unordered-list-item"><li>17 V for relay output</li></ul><li>Maximum Response Time on Input Open:</li><ul class="md-block-unordered-list-item"><li>25 ms</li></ul><li>Local Signaling:</li><ul class="md-block-unordered-list-item"><li>1 LED for electronic internal fuse status</li><li>1 LED for restarting function</li><li>1 LED for safety outputs closed function</li><li>1 LED for safety outputs open function</li><li>1 incandescent lamp for muting power consumption: 4…6.5 W</li></ul><li>Output Thermal Current:</li><ul class="md-block-unordered-list-item"><li>5.6 A per relay</li><li>11 A maximum</li></ul><li>Maximum Power Consumption in W:</li><ul class="md-block-unordered-list-item"><li>15 W</li></ul><li>Protection Type:</li><ul class="md-block-unordered-list-item"><li>Electronic internal fuse</li></ul><li>[Ui] Rated Insulation Voltage:</li><ul class="md-block-unordered-list-item"><li>300 V (pollution degree 2) conforming to DIN VDE 0110 parts 1 and 2</li><li>300 V (pollution degree 2) conforming to EN/IEC 60947-5-1</li></ul><li>[Uimp] Rated Impulse Withstand Voltage:</li><ul class="md-block-unordered-list-item"><li>4 kV overvoltage category III conforming to DIN VDE 0110 parts 1 and 2</li><li>4 kV overvoltage category III conforming to EN/IEC 60947-5-1</li></ul></ul>Environment<ul class="md-block-unordered-list-item"><li>Ambient Air Temperature:</li><ul class="md-block-unordered-list-item"><li>For Operation: -10…55 °C</li><li>For Storage: -25…85 °C</li></ul><li>IP Degree of Protection:</li><ul class="md-block-unordered-list-item"><li>IP20 (terminals) conforming to IEC 60529</li><li>IP40 (enclosure) conforming to IEC 60529</li></ul></ul>

<h3>Schneider Electric XPSCM1144 single-beam photo-electric Sensors - Module XPS-CM</h3>
This XPSCM safety module is for monitoring of single-beam photo-electric sensors and has a built-in "muting" function. It meets the requirements of PL c/Category 2 conforming to EN/ISO 13849-1.and SILCL1 conforming to EN/IEC 61508 and EN/IEC 62061. Used in conjunction with XU2S single-beam photo-electric sensors (periodically tested), it establishes a category 2 light curtain conforming to IEC/EN 61496 parts 1 and 2.
Main
<ul>
<li>Range of Product: Telemecanique Safety Light Curtains XUSL</li>
<li>Product or Component Type: Safety Module</li>
<li>Safety Module Name: XPSCM</li>
<li>Safety Module Application: For monitoring of single beam photo-electric sensor</li>
<li>Function of Module: Built-in muting</li>
<li>Safety Level:</li>
<ul>
<li>Can reach Category 2 with the appropriate control system and correctly wired conforming to EN/ISO 13849-1</li>
<li>Can reach SILCL 1 with the appropriate control system and correctly wired conforming to EN/IEC 62061</li>
<li>Can reach PL = c with the appropriate control system and correctly wired conforming to EN/ISO 13849-1</li>
</ul>
<li>Safety Reliability Data:</li>
<ul>
<li>MTTFd (Mean Time To Dangerous Failure) = 16.6 years conforming to EN/ISO 13849-1</li>
<li>DC (Diagnostic Coverage) = 95.5% conforming to EN/ISO 13849-1</li>
<li>PFH (Probability of Dangerous Failure per Hour) = 3.12E-7 1/h conforming to EN/IEC 61508</li>
<li>PFHd (Probability of Dangerous Failure per Hour) = 3.12E-7 1/h conforming to EN/IEC 62061</li>
</ul>
<li>Number of Inputs:</li>
<ul>
<li>2 (terminals MA, MB) for muting function</li>
<li>4 (terminals Z1, Z2, Z3, Z4) for sensor</li>
</ul>
<li>Input Voltage:</li>
<ul>
<li>24 V DC for sensor</li>
<li>24 V DC (terminals U+, U-) for muting function</li>
</ul>
<li>Input Compatibility:</li>
<ul>
<li>XC limit switch for muting function</li>
<li>XU2M18PP340... for muting function</li>
<li>XU2S18PP340... (infrared) for sensor</li>
<li>XU9M18PP340... for muting function</li>
</ul>
<li>Connections - Terminals: Various captive screw clamp terminals for different cable types and configurations</li>
<li>Output Type: Relay 2 NO (Normally Open) (13-14, 23-24), volt-free</li>
<li>Number of Additional Circuits: 0</li>
<li>Rated Supply Voltage ([Us]): 24 V DC with a tolerance of -20% to +20%</li>
</ul>
Complimentary
<ul>
<li>Sensor Power Supply:</li>
<ul>
<li>U+, U-: 24 V DC</li>
</ul>
<li>Maximum Supply Current for Sensors:</li>
<ul>
<li>200 mA</li>
</ul>
<li>Input Current:</li>
<ul>
<li>200 mA for muting function</li>
</ul>
<li>Synchronization Time Between Inputs:</li>
<ul>
<li>3 s (+/- 20 %) for the activation of the MA/MB muting signal</li>
</ul>
<li>Muting Maximum Duration:</li>
<ul>
<li>60 s (-10...30 %)</li>
</ul>
<li>Maximum Line Resistance:</li>
<ul>
<li>10 Ohm for sensor power supply</li>
</ul>
<li>Breaking Capacity:</li>
<ul>
<li>180 VA holding AC-15 C300 relay output</li>
<li>1800 VA inrush AC-15 C300 relay output</li>
<li>20 mA at 24 V for solid-state output</li>
<li>1.5 A at 24 V (DC-13) time constant: 50 ms for relay output</li>
</ul>
<li>Associated Fuse Rating:</li>
<ul>
<li>4 A gG for relay output conforming to DIN VDE 0660 part 200</li>
<li>4 A gG for relay output conforming to EN/IEC 60947-5-1</li>
<li>6 A fast blow for relay output conforming to DIN VDE 0660 part 200</li>
<li>6 A fast blow for relay output conforming to EN/IEC 60947-5-1</li>
</ul>
<li>Minimum Output Current:</li>
<ul>
<li>10 mA for relay output</li>
</ul>
<li>Minimum Output Voltage:</li>
<ul>
<li>17 V for relay output</li>
</ul>
<li>Maximum Response Time on Input Open:</li>
<ul>
<li>25 ms</li>
</ul>
<li>Local Signaling:</li>
<ul>
<li>1 LED for electronic internal fuse status</li>
<li>1 LED for restarting function</li>
<li>1 LED for safety outputs closed function</li>
<li>1 LED for safety outputs open function</li>
<li>1 incandescent lamp for muting power consumption: 4…6.5 W</li>
</ul>
<li>Output Thermal Current:</li>
<ul>
<li>5.6 A per relay</li>
<li>11 A maximum</li>
</ul>
<li>Maximum Power Consumption in W:</li>
<ul>
<li>15 W</li>
</ul>
<li>Protection Type:</li>
<ul>
<li>Electronic internal fuse</li>
</ul>
<li>[Ui] Rated Insulation Voltage:</li>
<ul>
<li>300 V (pollution degree 2) conforming to DIN VDE 0110 parts 1 and 2</li>
<li>300 V (pollution degree 2) conforming to EN/IEC 60947-5-1</li>
</ul>
<li>[Uimp] Rated Impulse Withstand Voltage:</li>
<ul>
<li>4 kV overvoltage category III conforming to DIN VDE 0110 parts 1 and 2</li>
<li>4 kV overvoltage category III conforming to EN/IEC 60947-5-1</li>
</ul>
</ul>
Environment
<ul>
<li>Ambient Air Temperature:</li>
<ul>
<li>For Operation: -10…55 °C</li>
<li>For Storage: -25…85 °C</li>
</ul>
<li>IP Degree of Protection:</li>
<ul>
<li>IP20 (terminals) conforming to IEC 60529</li>
<li>IP40 (enclosure) conforming to IEC 60529</li>
</ul>
</ul>
&nbsp; 
&nbsp;

APC by Schneider Electric

CLIPSAL

Telemecanique

Square D

Light Switches

Miniature Circuit Breakers - MCBs

Uninterruptible Power Supply 

Molded Case Circuit Breakers - MCCBs

Overload Relays

Motor Protection Circuit Breakers

TV, Telephone & Internet Sockets

Schneider

schneider electric xpscm1144 single-beam photo-electric sensors module xps-cm sensor fotolistrik sinar tunggal modul safety relays penderia foto-elektrik pancaran electric/施耐德电气 单光束光电传感器 模块 施耐德电气