Orico

Startech

IT & Electronics

it-electronics

IT Accessories

it-accessories

USB Hubs

usb-hubs

- PORTABLE EXTERNAL STORAGE: this M.2 hard drive enclosure is specially designed for M Key NVMe PCIe SSD (22110/2280/ 2260/ 2242), Supports 2 M.2 NVMe hard disk reads and writes at the same time. Compatible with Windows/Mac/Linux, can be used to offline clone or to expand storage capacity by connecting PC , Laptop computers, smart TVs, PS4, XBOX and other devices.

- ONE-KEY OFFLINE CLONE: This dual-slot hard drive enclosure can not only be used as an external NVME SSD to expand your storage capacity, but also can be used for offline backup. No need to connect to a PC, just plug in and press the start button then you can back up your important data. LED indicator can monitor the SSDs' clone progress at any time. Note: please back up the data on the target disk before cloning to avoid losing important data.

- 10GBP/S HIGH-SPEED: ORICO USB 3.1 Gen2 hard disk docking station is equipped with C to C cable and C to A cable, giving you more choices. The fastest transmission speed can reach about 1000MB/S with C to C cable and about 500MB/S with C to A cable. At the same time, it supports UASP acceleration protocol which can make your NVME SSDs run more quickly and stably.

- EASY TO USE: ORICO Tool-Free SSD docking stations are very easy to use, no need any tools. They all support plug & play and hot swap, no drivers required. Except the SSDs, you do not need to prepare anything else, because the package contains all the accessories you need: two 0.5m data cables (A to C and C to C) and a 5V/4A power adapter.

- 12-MONTH-WORRY-FREE WARRANTY: ORICO M.2 external drive docking station will automatically go to sleep after 10 minutes of inactivity; the hard disk is not included in the package; ORICO offers 12-month warranty and lifetime email technical support. If you have any problems, please contact us, we will give you a satisfactory solution within 24 hours.

Delivery can be expedited with additional      freight cost

Stock availability/ Actual      order lead time will be rechecked once confirm order

We do not accept returns or      exchanges due to Indent item unless product quality issue

Picture shown is for      illustration purposes only, actual product may differ

This image is representative of      the product range, actual product may differ

Product may vary slightly from      image representation

Due to Covid-19 pandemic and      worldwide material shortage, temporary delay in delivery may occur;      therefore, the delivery date (mention above) is non-binding

Item: ORICO NVME Docking StationHardware interface: USB 3.1 Type CColor: SilverHardware platform: WindowsMaterial: AluminumItem weight: 0.2kgCompatible devices: Desktop- PORTABLE EXTERNAL STORAGE: this M.2 hard drive enclosure is specially designed for M Key NVMe PCIe SSD (22110/2280/ 2260/ 2242), Supports 2 M.2 NVMe hard disk reads and writes at the same time. Compatible with Windows/Mac/Linux, can be used to offline clone or to expand storage capacity by connecting PC , Laptop computers, smart TVs, PS4, XBOX and other devices.- ONE-KEY OFFLINE CLONE: This dual-slot hard drive enclosure can not only be used as an external NVME SSD to expand your storage capacity, but also can be used for offline backup. No need to connect to a PC, just plug in and press the start button then you can back up your important data. LED indicator can monitor the SSDs&#x27; clone progress at any time. Note: please back up the data on the target disk before cloning to avoid losing important data.- 10GBP/S HIGH-SPEED: ORICO USB 3.1 Gen2 hard disk docking station is equipped with C to C cable and C to A cable, giving you more choices. The fastest transmission speed can reach about 1000MB/S with C to C cable and about 500MB/S with C to A cable. At the same time, it supports UASP acceleration protocol which can make your NVME SSDs run more quickly and stably.- EASY TO USE: ORICO Tool-Free SSD docking stations are very easy to use, no need any tools. They all support plug &amp; play and hot swap, no drivers required. Except the SSDs, you do not need to prepare anything else, because the package contains all the accessories you need: two 0.5m data cables (A to C and C to C) and a 5V/4A power adapter.- 12-MONTH-WORRY-FREE WARRANTY: ORICO M.2 external drive docking station will automatically go to sleep after 10 minutes of inactivity; the hard disk is not included in the package; ORICO offers 12-month warranty and lifetime email technical support. If you have any problems, please contact us, we will give you a satisfactory solution within 24 hours.Note: <ol class="md-block-ordered-list-item"><li>Delivery can be expedited with additional freight cost</li><li>Stock availability/ Actual order lead time will be rechecked once confirm order</li><li>We do not accept returns or exchanges due to Indent item unless product quality issue</li><li>Picture shown is for illustration purposes only, actual product may differ</li><li>This image is representative of the product range, actual product may differ</li><li>Product may vary slightly from image representation</li><li>Due to Covid-19 pandemic and worldwide material shortage, temporary delay in delivery may occur; therefore, the delivery date (mention above) is non-binding</li></ol>

&nbsp;&nbsp;
Item: ORICO NVME Docking Station
Hardware interface: USB 3.1 Type C
Color: Silver
Hardware platform: Windows
Material: Aluminum
Item weight: 0.2kg
Compatible devices: Desktop
- PORTABLE EXTERNAL STORAGE: this M.2 hard drive enclosure is specially designed for M Key NVMe PCIe SSD (22110/2280/ 2260/ 2242), Supports 2 M.2 NVMe hard disk reads and writes at the same time. Compatible with Windows/Mac/Linux, can be used to offline clone or to expand storage capacity by connecting PC , Laptop computers, smart TVs, PS4, XBOX and other devices.
- ONE-KEY OFFLINE CLONE: This dual-slot hard drive enclosure can not only be used as an external NVME SSD to expand your storage capacity, but also can be used for offline backup. No need to connect to a PC, just plug in and press the start button then you can back up your important data. LED indicator can monitor the SSDs' clone progress at any time. Note: please back up the data on the target disk before cloning to avoid losing important data.
- 10GBP/S HIGH-SPEED: ORICO USB 3.1 Gen2 hard disk docking station is equipped with C to C cable and C to A cable, giving you more choices. The fastest transmission speed can reach about 1000MB/S with C to C cable and about 500MB/S with C to A cable. At the same time, it supports UASP acceleration protocol which can make your NVME SSDs run more quickly and stably.
- EASY TO USE: ORICO Tool-Free SSD docking stations are very easy to use, no need any tools. They all support plug &amp; play and hot swap, no drivers required. Except the SSDs, you do not need to prepare anything else, because the package contains all the accessories you need: two 0.5m data cables (A to C and C to C) and a 5V/4A power adapter.
- 12-MONTH-WORRY-FREE WARRANTY: ORICO M.2 external drive docking station will automatically go to sleep after 10 minutes of inactivity; the hard disk is not included in the package; ORICO offers 12-month warranty and lifetime email technical support. If you have any problems, please contact us, we will give you a satisfactory solution within 24 hours.
Note: 
<ol>
<li>Delivery can be expedited with additional freight cost</li>
<li>Stock availability/ Actual order lead time will be rechecked once confirm order</li>
<li>We do not accept returns or exchanges due to Indent item unless product quality issue</li>
<li>Picture shown is for illustration purposes only, actual product may differ</li>
<li>This image is representative of the product range, actual product may differ</li>
<li>Product may vary slightly from image representation</li>
<li>Due to Covid-19 pandemic and worldwide material shortage, temporary delay in delivery may occur; therefore, the delivery date (mention above) is non-binding</li>
</ol>

Prolockey

NANHUA

Eezee Pro

Iflytek

Nitto

Remax

SAIRUI

Guo Mao

Padlocks & Lockout Devices

Padlocks & Lockout Station

Toolbags

Lockout Tags

Safe Box & Safe Chest

Safety Cone

Cable Protectors

Pedal Bins

Desk stationery

 Samuel Wang

Dual-Bay M.2 Nvme Cloner Docking Station, Orico Tool-Free Usb C to Nvme Ssd Enclosure for M Key Pcie 2242 2260 2280 22110 M.2 Ssds, Support Offline Clone Duplicator Function up to 10Gbps 8TB-M2P2

dual-bay m.2 nvme cloner docking station, orico tool-free usb ssd enclosure key pcie 2242 2260 2280 22110 ssds, support offline clone duplicator function 10gbps 8tb-m2p2 ke untuk mendukung fungsi duplikator klon hingga accessories aksesoris stesen dok dwi-bay nvme, penutup tanpa alat menyokong pendua luar talian sehingga aksesori 双槽 克隆扩展坞， orico/奥里科 免工具 固态硬盘外壳，适用于 固态硬盘，支持离线克隆复制器功能高达 it配件 奥里科

dual-bay-m-2-nvme-cloner-docking-station-orico-tool-free-usb-c-to-nvme-ssd-enclosure-for-m-key-pcie-2242-2260-2280-22110-m-2-ssds-support-offline-clone-duplicator-function-up-to-10gbps-8tb-m2p2

 2.5 / 3.5 inch 2 Bay USB3.0 1 to 1 Clone Hard Drive Dock •	Model:  ORICO 6228US3-C •	Material:  ABS Material •	Output:  USB3.0 Type-B •	HDD Supported:  2.5/3.5 inch HDD and SSD •	Data Cable:  1M •	Supported Capacity:  10TB*2 •	Indicator:  Blue LED Indicator •	Power Supply:  12V3A •	Support System: Windows/Linux/Mac •	Clone: Standalone 1 to 1 Clone •	Dimension: 142*110*57mm 

2.5 / 3.5 inch 2 Bay USB3.0 1 to 1 Clone Hard Drive Dock •	Model: ORICO 6228US3-C •	Material: ABS Material •	Output: USB3.0 Type-B •	HDD Supported: 2.5/3.5 inch HDD and SSD •	Data Cable: 1M •	Supported Capacity: 10TB*2 •	Indicator: Blue LED Indicator •	Power Supply: 12V3A •	Support System: Windows/Linux/Mac •	Clone: Standalone 1 to 1 Clone •	Dimension: 142*110*57mm

&nbsp;2.5 / 3.5 inch 2 Bay USB3.0 1 to 1 Clone Hard Drive Dock •	Model: ORICO 6228US3-C •	Material: ABS Material •	Output: USB3.0 Type-B •	HDD Supported: 2.5/3.5 inch HDD and SSD •	Data Cable: 1M •	Supported Capacity: 10TB*2 •	Indicator: Blue LED Indicator •	Power Supply: 12V3A •	Support System: Windows/Linux/Mac •	Clone: Standalone 1 to 1 Clone •	Dimension: 142*110*57mm&nbsp;

Niksan

Others

Western Digital

UGREEN

Thrustmaster

PROLINK

Vention

Seagate

POWERPAC

Computer Supplies

Charger

Data Storage

Data Cable 

Computers

Office goods

Audio Cables

Clothing

Networking Products

Atsg Impex

buyerIntroduction

ORICO 6228US3-C Hdd / Ssd Docking Offline Cloning 2.5 / 3.5 Inch 2 Bay USB3.0 1 to 1 Clone Hard Drive Dock 6228US3C

orico 6228us3-c hdd ssd docking offline cloning 2.5 3.5 inch bay usb3.0 clone hard drive dock 6228us3c kloning inci ke accessories aksesoris pengklonan luar talian hingga klon dok pemacu keras aksesori orico/奥里科 硬盘/固态硬盘扩展坞离线克隆 英寸 盘位 克隆硬盘扩展坞 it配件 奥里科

orico-6228us3-c-hdd-ssd-docking-offline-cloning-2-5-3-5-inch-2-bay-usb3-0-1-to-1-clone-hard-drive-dock-6228us3c

ORICO Dual Bay 2.5" 3.5" USB 3.0 to SATA Hard Drive Docking Station with Offline Duplicator and Clone Function UASP Protocol and 2 x 12TB

* Item: ORICO USB 3.0 to SATA Dual Slot External Docking Station for HDD 2.5 & 3.5 HDD/SSD HDD Duplicator/Clone Function [Support 16TB*2] * Material: ABS Plastic * Size: 132x117, 5x65mm * HDD Support: 2.5 & 3.5 inch SATA HDD/SSD

*Pros: Free Tools/Hot Swap/No Drive/Offline Clone/Smart Sleep

* Support system: Windows 11 /10 / 8 / 7 / Vista / XP or Mac OS 9.1 and above

* SuperSpeed USB3.0, transfer rate up to 5Gbps, backward compatible with USB2.0/1.1.

* Compatible with 2.5" and 3.5" SATA hard drives.

* Tool-free: Easily install and remove SATA hard drives without tools or screws.

* Compatible with plug and play and hot swap, no need to install drivers.

---- Make sure the USB cable is disconnected from the computer.

1. Insert one hard disk into the source bay and another hard disk into the target bay (the capacity of the target disk must be equal to or greater than that of the source disk).

2. Press the PC/CLONE switch on the back of the hard drive to the clone side.

3. Plug in the power supply and press the power switch.

4. Then press the start button on the rear panel.

5. The blue LED will blink at 20% to indicate the start of the cloning process.

6. When all lights turn solid blue (20%-100%), the cloning process is complete.

7. Finally press the power switch and remove the disc.

1. Before cloning, copy the files to the target hard drive. When performing offline cloning, all files on the target hard disk will be overwritten. If the data on the target hard disk is still in use, please use your computer to back it up first.

2. To avoid loss of data, do not remove or insert a hard drive while a drive is in operation in the dock.

3. Make sure the USB cable is disconnected when using the offline clone function

1 x ORICO 2 Bays USB3.0 HDD Docking Station

1. Delivery can be expedited with additional freight cost

2. Stock availability/ Actual order lead time will be rechecked once confirm order

3. We do not accept returns or exchanges due to Indent item unless product quality issue

4. Picture shown is for illustration purposes only, actual product may differ

5. This image is representative of the product range, actual product may differ

6. Product may vary slightly from image representation

ORICO Dual Bay 2.5&quot; 3.5&quot; USB 3.0 to SATA Hard Drive Docking Station with Offline Duplicator and Clone Function UASP Protocol and 2 x 12TB* Item: ORICO USB 3.0 to SATA Dual Slot External Docking Station for HDD 2.5 &amp; 3.5 HDD/SSD HDD Duplicator/Clone Function [Support 16TB*2] * Material: ABS Plastic * Size: 132x117, 5x65mm * HDD Support: 2.5 &amp; 3.5 inch SATA HDD/SSD*External interface: SuperSpeed USB3.0*Internal interface: SATA3.0*Data cable: USB3.0 Cable 3.3ft/1m*Pros: Free Tools/Hot Swap/No Drive/Offline Clone/Smart Sleep* Support system: Windows 11 /10 / 8 / 7 / Vista / XP or Mac OS 9.1 and aboveNote: HDD not included* SuperSpeed USB3.0, transfer rate up to 5Gbps, backward compatible with USB2.0/1.1.* Compatible with 2.5&quot; and 3.5&quot; SATA hard drives.* Tool-free: Easily install and remove SATA hard drives without tools or screws.*Includes 12V High Power AC Adapter.* Built-in power management switch.* Compatible with plug and play and hot swap, no need to install drivers.* Available for Windows, Mac and Linux.Please note Stand-alone clone function---- Make sure the USB cable is disconnected from the computer.1. Insert one hard disk into the source bay and another hard disk into the target bay (the capacity of the target disk must be equal to or greater than that of the source disk).2. Press the PC/CLONE switch on the back of the hard drive to the clone side.3. Plug in the power supply and press the power switch.4. Then press the start button on the rear panel.5. The blue LED will blink at 20% to indicate the start of the cloning process.6. When all lights turn solid blue (20%-100%), the cloning process is complete.7. Finally press the power switch and remove the disc.notes:1. Before cloning, copy the files to the target hard drive. When performing offline cloning, all files on the target hard disk will be overwritten. If the data on the target hard disk is still in use, please use your computer to back it up first.2. To avoid loss of data, do not remove or insert a hard drive while a drive is in operation in the dock.3. Make sure the USB cable is disconnected when using the offline clone functionBox contains:1 x ORICO 2 Bays USB3.0 HDD Docking Station1 x 12V3A AC power adapter1 x USB3.0 data cable1 x User Manual1 x service cardNote: 1. Delivery can be expedited with additional freight cost2. Stock availability/ Actual order lead time will be rechecked once confirm order3. We do not accept returns or exchanges due to Indent item unless product quality issue4. Picture shown is for illustration purposes only, actual product may differ5. This image is representative of the product range, actual product may differ6. Product may vary slightly from image representation

ORICO Dual Bay 2.5" 3.5" USB 3.0 to SATA Hard Drive Docking Station with Offline Duplicator and Clone Function UASP Protocol and 2 x 12TB
* Item: ORICO USB 3.0 to SATA Dual Slot External Docking Station for HDD 2.5 &amp; 3.5 HDD/SSD HDD Duplicator/Clone Function [Support 16TB*2] * Material: ABS Plastic * Size: 132x117, 5x65mm * HDD Support: 2.5 &amp; 3.5 inch SATA HDD/SSD
*External interface: SuperSpeed USB3.0
*Internal interface: SATA3.0
*Data cable: USB3.0 Cable 3.3ft/1m
*Pros: Free Tools/Hot Swap/No Drive/Offline Clone/Smart Sleep
* Support system: Windows 11 /10 / 8 / 7 / Vista / XP or Mac OS 9.1 and above
Note: HDD not included
* SuperSpeed USB3.0, transfer rate up to 5Gbps, backward compatible with USB2.0/1.1.
* Compatible with 2.5" and 3.5" SATA hard drives.
* Tool-free: Easily install and remove SATA hard drives without tools or screws.
*Includes 12V High Power AC Adapter.
* Built-in power management switch.
* Compatible with plug and play and hot swap, no need to install drivers.
* Available for Windows, Mac and Linux.
Please note Stand-alone clone function
---- Make sure the USB cable is disconnected from the computer.
1. Insert one hard disk into the source bay and another hard disk into the target bay (the capacity of the target disk must be equal to or greater than that of the source disk).
2. Press the PC/CLONE switch on the back of the hard drive to the clone side.
3. Plug in the power supply and press the power switch.
4. Then press the start button on the rear panel.
5. The blue LED will blink at 20% to indicate the start of the cloning process.
6. When all lights turn solid blue (20%-100%), the cloning process is complete.
7. Finally press the power switch and remove the disc.
notes:
1. Before cloning, copy the files to the target hard drive. When performing offline cloning, all files on the target hard disk will be overwritten. If the data on the target hard disk is still in use, please use your computer to back it up first.
2. To avoid loss of data, do not remove or insert a hard drive while a drive is in operation in the dock.
3. Make sure the USB cable is disconnected when using the offline clone function
Box contains:
1 x ORICO 2 Bays USB3.0 HDD Docking Station
1 x 12V3A AC power adapter
1 x USB3.0 data cable
1 x User Manual
1 x service card
Note:&nbsp;
1. Delivery can be expedited with additional freight cost
2. Stock availability/ Actual order lead time will be rechecked once confirm order
3. We do not accept returns or exchanges due to Indent item unless product quality issue
4. Picture shown is for illustration purposes only, actual product may differ
5. This image is representative of the product range, actual product may differ
6. Product may vary slightly from image representation

Orico Dual Bay 2.5" 3.5" Usb 3.0 to Sata Hard Drive Docking Station With Offline Duplicator and Clone Function Uasp Protocol and 2 X 12TB

orico dual bay 2.5" 3.5" usb 3.0 sata hard drive docking station offline duplicator clone function uasp protocol 12tb ke dengan duplikator dan fungsi klon protokol accessories aksesoris stesen dok cakera keras pendua luar talian aksesori orico/奥里科 双槽 2.5 英寸 3.5 硬盘扩展坞，带离线复制器和克隆功能 协议和 it配件 奥里科

orico-dual-bay-2-5-3-5-usb-3-0-to-sata-hard-drive-docking-station-with-offline-duplicator-and-clone-function-uasp-protocol-and-2-x-12tb

Startech SATDOCK4U3RE Esata, Usb Type B Hard Drive Docking Station for 4 Drives Sata Hard Drive 2.5 X 3.5in

 The SATDOCK4U3RE USB 3.0 and eSATA 1-to-3 Hard Drive Duplicator docking station enables you to duplicate/clone a single SATA hard drive to up to three other SATA drives simultaneously, as a standalone device. The duplicator can also function as a regular 4-bay hard drive docking station, by connecting to a host computer system. Large capacity drives (tested with up to 4TB 3.5" and 1TB 2.5" drives per bay) can be used to greatly enhance your computer's storage/backup capabilities.


Able to perform 1:3 sector duplication, including HPA, from a single SATA drive onto three others simultaneously (at a rate of up to 72 MBps), the duplicator/docking station can save you time and effort. As an external HDD dock, it can be connected to your host computer through USB 3.0 or eSATA, providing data transfer speeds up to 5 Gbps or 3Gbps respectively, from the hard drives to your computer system.


Features Quick and Secure Erase functions and support for IDE hard drives using the included SATA to IDE hard drive adapter (SAT2IDEADP).


• Sector-by-Sector drive duplication, including the HPA
• Integrated LCD display for duplication progress and options menu
• SuperSpeed USB 3.0 compliant host interface with supported data transfer rates of up to 5 Gbps
• High speed eSATA host interface with supported data transfer rates up to 3 Gbps
• Built-in quick drive erase and Secure Erase functions
• Dual 60mm cooling fans mounted below the drives with variable speed controls (including OFF)
• Supports 2.5in or 3.5in form factor hard drives (HDD) or solid state drives (SSD)
• Compatible with SATA (1.5/3.0/6.0 Gbps) drives
• Patented hard drive eject push-buttons for each drive
• Independent power buttons for each hard drive
• Extra, easy-access spacing between each drive
• Four large, stable, non-slip table-top feet
• Includes a SATA to IDE drive adapter
• Create 3 exact copies of a source SATA drive simultaneously, without having to connect to a computer
• Access up to 4 SATA hard drives simultaneously over a single USB 3.0 or eSATA connection
• Dual, variable speed fans allows you to adjust the amount of cooling for any kind of environment or drive type


• Creating multiple exact replicas of a source drive onto a new drive for large deployment of identical computer systems
• Law enforcement and forensic technicians who need one or more exact copies of the original hard drive for testing or investigation
• SMB, OEM, System Integrators, IT and service technicians requiring quick access to bare external hard drive contents, or the ability to clone data for data / disk recovery.


• SATA Duplicator Dock
• SATA to IDE Adapter
• SP4 to LP4 Power Cable
• 40-pin IDE Cable
• Package of Mounting Screws
• 44-Pin to 40-Pin IDE Cable
• USB 3.0 Cable
• eSATA Cable
• Universal Power Adapter (NA/JP, UK, EU, ANZ)
• Instruction Manual


Can I use a solid state drive (SSD) with this hard drive duplicator?


Solid-state drives (SSDs) use SATA connectors to access power and transfer data. Any duplicator that can copy to or from SATA hard drives will work with a StarTech.com duplicator. Note: If you use a dock to duplicate SSDs, keep in mind that the StarTech.com disk duplicators execute a sector by sector read and write. SSDs are rated by a number of reads and writes. Repeated duplication and sector by sector reads and writes of SSDs can reduce the life cycle of the drive.


<h3 class="md-block-header-three">Startech SATDOCK4U3RE Esata, Usb Type B Hard Drive Docking Station for 4 Drives Sata Hard Drive 2.5 X 3.5in</h3> The SATDOCK4U3RE USB 3.0 and eSATA 1-to-3 Hard Drive Duplicator docking station enables you to duplicate/clone a single SATA hard drive to up to three other SATA drives simultaneously, as a standalone device. The duplicator can also function as a regular 4-bay hard drive docking station, by connecting to a host computer system. Large capacity drives (tested with up to 4TB 3.5&quot; and 1TB 2.5&quot; drives per bay) can be used to greatly enhance your computer&#x27;s storage/backup capabilities. Able to perform 1:3 sector duplication, including HPA, from a single SATA drive onto three others simultaneously (at a rate of up to 72 MBps), the duplicator/docking station can save you time and effort. As an external HDD dock, it can be connected to your host computer through USB 3.0 or eSATA, providing data transfer speeds up to 5 Gbps or 3Gbps respectively, from the hard drives to your computer system. Features Quick and Secure Erase functions and support for IDE hard drives using the included SATA to IDE hard drive adapter (SAT2IDEADP). <h3 class="md-block-header-three">Features &amp; Benefits</h3>• Sector-by-Sector drive duplication, including the HPA • Integrated LCD display for duplication progress and options menu • SuperSpeed USB 3.0 compliant host interface with supported data transfer rates of up to 5 Gbps • High speed eSATA host interface with supported data transfer rates up to 3 Gbps • Built-in quick drive erase and Secure Erase functions • Dual 60mm cooling fans mounted below the drives with variable speed controls (including OFF) • Supports 2.5in or 3.5in form factor hard drives (HDD) or solid state drives (SSD) • Compatible with SATA (1.5/3.0/6.0 Gbps) drives • Patented hard drive eject push-buttons for each drive • Independent power buttons for each hard drive • Extra, easy-access spacing between each drive • Four large, stable, non-slip table-top feet • Includes a SATA to IDE drive adapter • Create 3 exact copies of a source SATA drive simultaneously, without having to connect to a computer • Access up to 4 SATA hard drives simultaneously over a single USB 3.0 or eSATA connection • Dual, variable speed fans allows you to adjust the amount of cooling for any kind of environment or drive type <h3 class="md-block-header-three">Applications</h3>• Creating multiple exact replicas of a source drive onto a new drive for large deployment of identical computer systems • Law enforcement and forensic technicians who need one or more exact copies of the original hard drive for testing or investigation • SMB, OEM, System Integrators, IT and service technicians requiring quick access to bare external hard drive contents, or the ability to clone data for data / disk recovery. <h3 class="md-block-header-three">What’s in the package?</h3>• SATA Duplicator Dock • SATA to IDE Adapter • SP4 to LP4 Power Cable • 40-pin IDE Cable • Package of Mounting Screws • 44-Pin to 40-Pin IDE Cable • USB 3.0 Cable • eSATA Cable • Universal Power Adapter (NA/JP, UK, EU, ANZ) • Instruction Manual <h3 class="md-block-header-three">FAQ</h3>Can I use a solid state drive (SSD) with this hard drive duplicator? Solid-state drives (SSDs) use SATA connectors to access power and transfer data. Any duplicator that can copy to or from SATA hard drives will work with a StarTech.com duplicator. Note: If you use a dock to duplicate SSDs, keep in mind that the StarTech.com disk duplicators execute a sector by sector read and write. SSDs are rated by a number of reads and writes. Repeated duplication and sector by sector reads and writes of SSDs can reduce the life cycle of the drive. <h3 class="md-block-header-three">Compatible Drive Type</h3>SATA

<h3>Startech SATDOCK4U3RE Esata, Usb Type B Hard Drive Docking Station for 4 Drives Sata Hard Drive 2.5 X 3.5in</h3>
&nbsp;The SATDOCK4U3RE USB 3.0 and eSATA 1-to-3 Hard Drive Duplicator docking station enables you to duplicate/clone a single SATA hard drive to up to three other SATA drives simultaneously, as a standalone device. The duplicator can also function as a regular 4-bay hard drive docking station, by connecting to a host computer system. Large capacity drives (tested with up to 4TB 3.5" and 1TB 2.5" drives per bay) can be used to greatly enhance your computer's storage/backup capabilities. 

Able to perform 1:3 sector duplication, including HPA, from a single SATA drive onto three others simultaneously (at a rate of up to 72 MBps), the duplicator/docking station can save you time and effort. As an external HDD dock, it can be connected to your host computer through USB 3.0 or eSATA, providing data transfer speeds up to 5 Gbps or 3Gbps respectively, from the hard drives to your computer system. 

Features Quick and Secure Erase functions and support for IDE hard drives using the included SATA to IDE hard drive adapter (SAT2IDEADP). 

<h3>Features &amp; Benefits</h3>
• Sector-by-Sector drive duplication, including the HPA 
• Integrated LCD display for duplication progress and options menu 
• SuperSpeed USB 3.0 compliant host interface with supported data transfer rates of up to 5 Gbps 
• High speed eSATA host interface with supported data transfer rates up to 3 Gbps 
• Built-in quick drive erase and Secure Erase functions 
• Dual 60mm cooling fans mounted below the drives with variable speed controls (including OFF) 
• Supports 2.5in or 3.5in form factor hard drives (HDD) or solid state drives (SSD) 
• Compatible with SATA (1.5/3.0/6.0 Gbps) drives 
• Patented hard drive eject push-buttons for each drive 
• Independent power buttons for each hard drive 
• Extra, easy-access spacing between each drive 
• Four large, stable, non-slip table-top feet 
• Includes a SATA to IDE drive adapter 
• Create 3 exact copies of a source SATA drive simultaneously, without having to connect to a computer 
• Access up to 4 SATA hard drives simultaneously over a single USB 3.0 or eSATA connection 
• Dual, variable speed fans allows you to adjust the amount of cooling for any kind of environment or drive type 

<h3>Applications</h3>
• Creating multiple exact replicas of a source drive onto a new drive for large deployment of identical computer systems 
• Law enforcement and forensic technicians who need one or more exact copies of the original hard drive for testing or investigation 
• SMB, OEM, System Integrators, IT and service technicians requiring quick access to bare external hard drive contents, or the ability to clone data for data / disk recovery. 

<h3>What’s in the package?</h3>
• SATA Duplicator Dock 
• SATA to IDE Adapter 
• SP4 to LP4 Power Cable 
• 40-pin IDE Cable 
• Package of Mounting Screws 
• 44-Pin to 40-Pin IDE Cable 
• USB 3.0 Cable 
• eSATA Cable 
• Universal Power Adapter (NA/JP, UK, EU, ANZ) 
• Instruction Manual 

<h3>FAQ</h3>
Can I use a solid state drive (SSD) with this hard drive duplicator? 

Solid-state drives (SSDs) use SATA connectors to access power and transfer data. Any duplicator that can copy to or from SATA hard drives will work with a StarTech.com duplicator. Note: If you use a dock to duplicate SSDs, keep in mind that the StarTech.com disk duplicators execute a sector by sector read and write. SSDs are rated by a number of reads and writes. Repeated duplication and sector by sector reads and writes of SSDs can reduce the life cycle of the drive. 

<h3>Compatible Drive Type</h3>
SATA&nbsp;

Datasheet SATDOCK4U3RE

RS Pro

SCHNEIDER ELECTRIC

FLUKE

Fluke Networks

Abus

Screw

O Ring

Surface Mount Resistors

Circular Connectors

Contactors

Bolts

Panel Mount Indicators 

Molded Case Circuit Breakers - MCCBs

Junction & Enclosure Box

Electrical Wire 

RS Components ETH SG

startech satdock4u3re esata, usb type hard drive docking station drives sata 2.5 3.5in stasiun tipe untuk 2,5 3,5 inci accessories aksesoris stesen dok pemacu keras jenis aksesori startech/星泰科技 esata，usb 型硬盘扩展坞，适用于 个驱动器 硬盘 3.5 英寸 it配件 星泰科技

startech-satdock4u3re-esata-usb-type-b-hard-drive-docking-station-for-4-drives-sata-hard-drive-2-5-x-3-5in

Startech DK30CH2DEPUE 5 X Usb Ports, Usb A, Usb C - Triple Monitor 4K USB-C Docking Station With Displayport, Hdmi

 
Designed with productivity in mind, this docking station from StarTech.com has five USB 3.0 ports, three ports for 4k video output, and 100W of power output. For users wanting a range of ports and flexibility with connection points, particularly when laptops are being released with limited port options, this is an excellent solution. It’s the perfect companion for your MacBook, Dell XPS, Chromebook, or other USB C enabled computer.


StarTech’s laptop docking station provide two different output ports for video depending on the display. The HDMI and DisplayPort ports allow users to create a multi-display setup by connecting 3 separate 4k screens. The DisplayPort connections can display 4k @ 60Hz, while the HDMI port will display the same @ 30Hz.
For users sporting a 5k display, you can use both DisplayPort receptacles to connect it @ 60Hz.
This is a superb way to present in the boardroom and it’s a valued addition for home or office workers where multiple HD monitors are incorporated into your workstation. It offers great versatility to users who are constantly having to adapt and improved productivity with the ability to host multiple displays.


Charge and power your computer in no time with 100W of power delivery from this multiport connector. Simultaneously charge and power peripherals such as phones, a mouse and keyboard from the 150W power adapter that’s included.


All USB ports are version 3.0 for faster data transfer. With one USB type-C, four USB type-A ports (one being a fast charge port), make sure you’re always connected to your essential devices at any time for power or data transfer.


StarTech.com have thought about what users want from a docking station and have provided a highly adaptable hub for users with different needs. Not only does it feature USB A and type-C ports, it also boasts gigabit ethernet (RJ45) compatibility, headset jack, as well as two 3.5mm jack ports for audio and microphone outputs.


For better security across your network, StarTech.com have included a free Windows software application that maintains the MAC address of your laptop while using the ethernet port connected in the dock, rather than the MAC address of the dock itself. This software is known as a MAC address changer or cloning software. It means that the network administrators can see the device on their network and can continue to monitor activity.
Note: You can also connect the USB-C docking station to your USB 3.0 laptop through a USB-A port, using a USB-C to A cable, such as the USB315AC1M (sold separately). Note: Power Delivery to charge your computer is not available through USB-A, and only dual video display is supported.


• Connects to host via 1ft USB C cable (included)
• 1x USB-C female port (can be used as a Thunderbolt 3 port)
• 3x USB-A 3.0 female ports
• 1x HDMI female port supporting 4k
• 2x Female DisplayPorts 4k
• 1x RJ-45 female connector
• 1x 3.5mm 4 position headset jack
• 100W power delivery 3.0
• Compatible with: Windows® 7, 8, 8.1, 10 macOS 10.9 - 10.12, 10.14 - 10.15 Chrome OS™ v55+
• Perfect for: Lenovo X1, ThinkPad P Series, Dell Latitudes, Precision, XPS 15, HP Spectre, ZBook & MacBook Pro 16
• Suitable for Thunderbolt 3 and UCB C enabled device like smartphones, tablets and laptops
• 1x Fast charge USB A 3.0 port
• 2x 3.5mm mini jack 3 position port
• 1x Security lock slot
• AC power adapter
• MAC address changer software


What are the applications for this docking station?

Users can connect a variety of peripherals to their notebook, tablet etc. with this docking station at work or at home. Charge multiple gadgets at once, especially with the fast charge port, stay connected to the internet, and connect three separate 4k screens for ultimate working and gaming. Those with a 5k display can connect it to both DisplayPort receptacles. Power hungry computers will also see a massive benefit with 100W’s of power delivery.


What is the purpose of a docking station?

The purpose of this dock is to expand on the different types of ports your current computer has.


Why do I need a docking station for my laptop?

With more and more laptops being released with a limited number and variety of port types, users are utilising docks to expand the ability to connect other peripherals to their computers.


A docking station is often bus powered and runs off the power on your laptop or tablet. There is normally one male connector, typically a USB A or C port, which connects to your computer. Once connected, users are free to connect whatever peripherals they require to the dock as long as there is a port available and compatible.


• 1 - Docking Station
• 1 - USB-C Cable
• 1 - Universal Power Adapter (UK. EU)
• 1 - Instruction Manual
• 1 - Anti-Slip Rubber Pads
 

<h3 class="md-block-header-three">Startech DK30CH2DEPUE 5 X Usb Ports, Usb A, Usb C - Triple Monitor 4K USB-C Docking Station With Displayport, Hdmi</h3> Designed with productivity in mind, this docking station from StarTech.com has five USB 3.0 ports, three ports for 4k video output, and 100W of power output. For users wanting a range of ports and flexibility with connection points, particularly when laptops are being released with limited port options, this is an excellent solution. It’s the perfect companion for your MacBook, Dell XPS, Chromebook, or other USB C enabled computer. <h3 class="md-block-header-three">Fantastic Video Output</h3>StarTech’s laptop docking station provide two different output ports for video depending on the display. The HDMI and DisplayPort ports allow users to create a multi-display setup by connecting 3 separate 4k screens. The DisplayPort connections can display 4k @ 60Hz, while the HDMI port will display the same @ 30Hz. For users sporting a 5k display, you can use both DisplayPort receptacles to connect it @ 60Hz. This is a superb way to present in the boardroom and it’s a valued addition for home or office workers where multiple HD monitors are incorporated into your workstation. It offers great versatility to users who are constantly having to adapt and improved productivity with the ability to host multiple displays. <h3 class="md-block-header-three">Super Power with 100W Power Delivery</h3>Charge and power your computer in no time with 100W of power delivery from this multiport connector. Simultaneously charge and power peripherals such as phones, a mouse and keyboard from the 150W power adapter that’s included. <h3 class="md-block-header-three">The Essentials</h3>All USB ports are version 3.0 for faster data transfer. With one USB type-C, four USB type-A ports (one being a fast charge port), make sure you’re always connected to your essential devices at any time for power or data transfer. <h3 class="md-block-header-three">The Extras</h3>StarTech.com have thought about what users want from a docking station and have provided a highly adaptable hub for users with different needs. Not only does it feature USB A and type-C ports, it also boasts gigabit ethernet (RJ45) compatibility, headset jack, as well as two 3.5mm jack ports for audio and microphone outputs. <h3 class="md-block-header-three">MAC address changer</h3>For better security across your network, StarTech.com have included a free Windows software application that maintains the MAC address of your laptop while using the ethernet port connected in the dock, rather than the MAC address of the dock itself. This software is known as a MAC address changer or cloning software. It means that the network administrators can see the device on their network and can continue to monitor activity. Note: You can also connect the USB-C docking station to your USB 3.0 laptop through a USB-A port, using a USB-C to A cable, such as the USB315AC1M (sold separately). Note: Power Delivery to charge your computer is not available through USB-A, and only dual video display is supported. <h3 class="md-block-header-three">Features and Benefits</h3>• Connects to host via 1ft USB C cable (included) • 1x USB-C female port (can be used as a Thunderbolt 3 port) • 3x USB-A 3.0 female ports • 1x HDMI female port supporting 4k • 2x Female DisplayPorts 4k • 1x RJ-45 female connector • 1x 3.5mm 4 position headset jack • 100W power delivery 3.0 • Compatible with: Windows® 7, 8, 8.1, 10 macOS 10.9 - 10.12, 10.14 - 10.15 Chrome OS™ v55+ • Perfect for: Lenovo X1, ThinkPad P Series, Dell Latitudes, Precision, XPS 15, HP Spectre, ZBook &amp; MacBook Pro 16 • Suitable for Thunderbolt 3 and UCB C enabled device like smartphones, tablets and laptops • 1x Fast charge USB A 3.0 port • 2x 3.5mm mini jack 3 position port • 1x Security lock slot • AC power adapter • MAC address changer software <h3 class="md-block-header-three">FAQ</h3><h3 class="md-block-header-three">What are the applications for this docking station?</h3>Users can connect a variety of peripherals to their notebook, tablet etc. with this docking station at work or at home. Charge multiple gadgets at once, especially with the fast charge port, stay connected to the internet, and connect three separate 4k screens for ultimate working and gaming. Those with a 5k display can connect it to both DisplayPort receptacles. Power hungry computers will also see a massive benefit with 100W’s of power delivery. <h3 class="md-block-header-three">What is the purpose of a docking station?</h3>The purpose of this dock is to expand on the different types of ports your current computer has. <h3 class="md-block-header-three">Why do I need a docking station for my laptop?</h3>With more and more laptops being released with a limited number and variety of port types, users are utilising docks to expand the ability to connect other peripherals to their computers. <h3 class="md-block-header-three">How does a docking station work?</h3>A docking station is often bus powered and runs off the power on your laptop or tablet. There is normally one male connector, typically a USB A or C port, which connects to your computer. Once connected, users are free to connect whatever peripherals they require to the dock as long as there is a port available and compatible. <h3 class="md-block-header-three">What’s in the box?</h3>• 1 - Docking Station • 1 - USB-C Cable • 1 - Universal Power Adapter (UK. EU) • 1 - Instruction Manual • 1 - Anti-Slip Rubber Pads

<h3>Startech DK30CH2DEPUE 5 X Usb Ports, Usb A, Usb C - Triple Monitor 4K USB-C Docking Station With Displayport, Hdmi</h3>
&nbsp; 
Designed with productivity in mind, this docking station from StarTech.com has five USB 3.0 ports, three ports for 4k video output, and 100W of power output. For users wanting a range of ports and flexibility with connection points, particularly when laptops are being released with limited port options, this is an excellent solution. It’s the perfect companion for your MacBook, Dell XPS, Chromebook, or other USB C enabled computer. 

<h3>Fantastic Video Output</h3>
StarTech’s laptop docking station provide two different output ports for video depending on the display. The HDMI and DisplayPort ports allow users to create a multi-display setup by connecting 3 separate 4k screens. The DisplayPort connections can display 4k @ 60Hz, while the HDMI port will display the same @ 30Hz. 
For users sporting a 5k display, you can use both DisplayPort receptacles to connect it @ 60Hz. 
This is a superb way to present in the boardroom and it’s a valued addition for home or office workers where multiple HD monitors are incorporated into your workstation. It offers great versatility to users who are constantly having to adapt and improved productivity with the ability to host multiple displays. 

<h3>Super Power with 100W Power Delivery</h3>
Charge and power your computer in no time with 100W of power delivery from this multiport connector. Simultaneously charge and power peripherals such as phones, a mouse and keyboard from the 150W power adapter that’s included. 

<h3>The Essentials</h3>
All USB ports are version 3.0 for faster data transfer. With one USB type-C, four USB type-A ports (one being a fast charge port), make sure you’re always connected to your essential devices at any time for power or data transfer. 

<h3>The Extras</h3>
StarTech.com have thought about what users want from a docking station and have provided a highly adaptable hub for users with different needs. Not only does it feature USB A and type-C ports, it also boasts gigabit ethernet (RJ45) compatibility, headset jack, as well as two 3.5mm jack ports for audio and microphone outputs. 

<h3>MAC address changer</h3>
For better security across your network, StarTech.com have included a free Windows software application that maintains the MAC address of your laptop while using the ethernet port connected in the dock, rather than the MAC address of the dock itself. This software is known as a MAC address changer or cloning software. It means that the network administrators can see the device on their network and can continue to monitor activity. 
Note: You can also connect the USB-C docking station to your USB 3.0 laptop through a USB-A port, using a USB-C to A cable, such as the USB315AC1M (sold separately). Note: Power Delivery to charge your computer is not available through USB-A, and only dual video display is supported. 

<h3>Features and Benefits</h3>
• Connects to host via 1ft USB C cable (included) 
• 1x USB-C female port (can be used as a Thunderbolt 3 port) 
• 3x USB-A 3.0 female ports 
• 1x HDMI female port supporting 4k 
• 2x Female DisplayPorts 4k 
• 1x RJ-45 female connector 
• 1x 3.5mm 4 position headset jack 
• 100W power delivery 3.0 
• Compatible with: Windows® 7, 8, 8.1, 10 macOS 10.9 - 10.12, 10.14 - 10.15 Chrome OS™ v55+ 
• Perfect for: Lenovo X1, ThinkPad P Series, Dell Latitudes, Precision, XPS 15, HP Spectre, ZBook &amp; MacBook Pro 16 
• Suitable for Thunderbolt 3 and UCB C enabled device like smartphones, tablets and laptops 
• 1x Fast charge USB A 3.0 port 
• 2x 3.5mm mini jack 3 position port 
• 1x Security lock slot 
• AC power adapter 
• MAC address changer software 

<h3>FAQ</h3>
<h3>What are the applications for this docking station?</h3>
Users can connect a variety of peripherals to their notebook, tablet etc. with this docking station at work or at home. Charge multiple gadgets at once, especially with the fast charge port, stay connected to the internet, and connect three separate 4k screens for ultimate working and gaming. Those with a 5k display can connect it to both DisplayPort receptacles. Power hungry computers will also see a massive benefit with 100W’s of power delivery. 

<h3>What is the purpose of a docking station?</h3>
The purpose of this dock is to expand on the different types of ports your current computer has. 

<h3>Why do I need a docking station for my laptop?</h3>
With more and more laptops being released with a limited number and variety of port types, users are utilising docks to expand the ability to connect other peripherals to their computers. 

<h3>How does a docking station work?</h3>
A docking station is often bus powered and runs off the power on your laptop or tablet. There is normally one male connector, typically a USB A or C port, which connects to your computer. Once connected, users are free to connect whatever peripherals they require to the dock as long as there is a port available and compatible. 

<h3>What’s in the box?</h3>
• 1 - Docking Station 
• 1 - USB-C Cable 
• 1 - Universal Power Adapter (UK. EU) 
• 1 - Instruction Manual 
• 1 - Anti-Slip Rubber Pads 
&nbsp;

startech dk30ch2depue usb ports, a, triple monitor 4k usb-c docking station displayport, hdmi port usb, stasiun tiga dengan hubs stesen dok paparan, startech/星泰科技 端口，usb a，usb 三显示器 扩展坞，带 displayport、hdmi 星泰科技