Chamberlains Leathermilk

DAYTON

HM Digital

Nabakem

RS Pro

Test & Measurement

test-measurement

Chemical Testing

chemical-testing

Flow & PH Meters

flow-ph-meters

Maintenance & Care

maintenance-care

Leather, Fabric and Upholstery Care

leather-fabric-and-upholstery-care

Multimeters

multimeters

Valve

valve

Swing Check Valves

swing-check-valves

Nabakem Mega Check Treatment, Penetrant & Developer Set

Non-Destructive Testing(NDT)  Crack Detection 

2. MEGA CHECK - PENETRANT (Coloring Penetrant Crack Detection Agent)

• Special equipment not required. Used anytime anywhere.

• Easy-to-use.

• This product changes invisible fine cracks into visible red-colored cracks, enabling you to check all cracks.

• It can be used regardless of material or form of inspection object.

• Easy-to-use and highly portable one touch aerosol type.

• Corrosive materials not used.

• Safe for aluminum alloy and magnesium alloy subject to easy corrosion.

• Inspection results are maintained as they are, unless you clean them.

• Aerosol product ensures clean use, making you maintain cleanliness of workplace.

• It can be used for nonferrous materials like porcelain, glass, synthetic resin as well as metal, iron, nonferrous metal, magnetic substance and nonmagnetic substance.

• Casting parts ----- pin hole, scalding flaw, shrinkage flaw forging parts ----- forging flaw.

• Weld ----- crack, failed joining.

• Metal materials ----- grinding flaw, heat flaw, cutting tool crack.

• Leakage check ----- tank, boiler, pipe etc.

Coloring Penetration Detection Method disovers invisible flaws easily by making red penetrant liquid penetrate into surface flaw areas of inspection object, removing residual red penetrant liquid with cleaner, and developing red penetrant in flaw areas by using white developer and capillary phenomenon.

• Everyone can use the detection method by following operations.

1. Pre-treatment
The dirt like dust, oil content, coating materials and rust prevents.
penetration of red penetrant. Remove them completely with cleaner before inspection.
Be careful of pre-treatment method to prevent surface flaw areas from being clogged.
The more perfect the pre-treatment is, the higher the detection effects are and the easier the inspection operations.

2. Penetration
Clean the inspection object surface and dry it.
Apply red penetrant evenly 20~30cm away from target object to make the surface covered with the penetrant.
Penetration time is 2∼3 minutes. Application at the intervals of 3∼6 minutes ensures better effects.
Recommended temperature of parts for inspection is about 10∼40℃.
When you do this inspection work outdoors in winter, it is recommended that you should lengthen penetration by about two times to obtain better penetration effects.
(Also, as soluble penetrant is available, water rinsing is possible and onsite use is very easy.)

3. Cleaning
After penetration treatment is done, remove red penetrant remained on the inspection object by using dry dustcloth, tissue paper, other absorbents or water rinsing (in case of soluble penetrant) and clean the object with dustcloth containing cleaner or tissue papers.
If weld with surface not smoothed or inspection object with black film of steel and casting products are not cleaned completely, and red penetrant is remained on their surfaces, it is difficult to determine flaws correctly in developing.
Use white or near-white dustcloth or tissue paper to know cleaning degree easily.
Do not apply it directly to the surface of inspection object.

4. Development
After cleaning red penetrant remained after penetration, apply white developer evenly to make it cover whole surface.
Applied white developer is dried immediately, showing white color.
As it dries, red penetrant in flaw areas is absorbed and appeared, making the position and shape of flaw marked sharply on the white powder phase.
Shake white developer light before use.

5. Inspection
The areas not showing red after development means that they have no flaws.
Determine the kinds, size and depth of redstained areas on the basis of their shape and size.
The kinds of flaw created by color fixation can not be determined by a single word, but we can show them as following.

• Keep it away from your children.

• This flammable product uses high-pressure gas.

1. Do not use it toward fire.
2. Do not use near heater or stove.
3. Do not use in the room using fire.
4. Do not keep it in the place above 40℃.

5. Provide ventilation to use it in the closed room.

6. Do not throw it away into fire.

7. Punch the can to throw it away.

8. Do not keep it in the closed place.

9. Spraying may not work well below 5℃.

<h3 class="md-block-header-three">Nabakem Mega Check Treatment, Penetrant &amp; Developer Set</h3><h3 class="md-block-header-three">Non-Destructive Testing(NDT) Crack Detection </h3><h3 class="md-block-header-three">Comprising: </h3>1) MEGA CHECK - TREATMENT (Cleaner) 2. MEGA CHECK - PENETRANT (Coloring Penetrant Crack Detection Agent)3. MEGA CHECK - DEVELOPER Content: Aerosol 450㎖/can <h3 class="md-block-header-three"> Features</h3><h3 class="md-block-header-three">• Special equipment not required. Used anytime anywhere. • Easy-to-use. • This product changes invisible fine cracks into visible red-colored cracks, enabling you to check all cracks. • It can be used regardless of material or form of inspection object. • Easy-to-use and highly portable one touch aerosol type. • Corrosive materials not used. • Safe for aluminum alloy and magnesium alloy subject to easy corrosion. • Inspection results are maintained as they are, unless you clean them. • Aerosol product ensures clean use, making you maintain cleanliness of workplace.</h3><h3 class="md-block-header-three">Uses</h3>• It can be used for nonferrous materials like porcelain, glass, synthetic resin as well as metal, iron, nonferrous metal, magnetic substance and nonmagnetic substance. • Casting parts ----- pin hole, scalding flaw, shrinkage flaw forging parts ----- forging flaw. • Weld ----- crack, failed joining. • Metal materials ----- grinding flaw, heat flaw, cutting tool crack. • Leakage check ----- tank, boiler, pipe etc.<h3 class="md-block-header-three">How to Use• </h3>Coloring Penetration Detection Method disovers invisible flaws easily by making red penetrant liquid penetrate into surface flaw areas of inspection object, removing residual red penetrant liquid with cleaner, and developing red penetrant in flaw areas by using white developer and capillary phenomenon. • Everyone can use the detection method by following operations. 1. Pre-treatment The dirt like dust, oil content, coating materials and rust prevents. penetration of red penetrant. Remove them completely with cleaner before inspection. Be careful of pre-treatment method to prevent surface flaw areas from being clogged. The more perfect the pre-treatment is, the higher the detection effects are and the easier the inspection operations. 2. Penetration Clean the inspection object surface and dry it. Apply red penetrant evenly 20~30cm away from target object to make the surface covered with the penetrant. Penetration time is 2∼3 minutes. Application at the intervals of 3∼6 minutes ensures better effects. Recommended temperature of parts for inspection is about 10∼40℃. When you do this inspection work outdoors in winter, it is recommended that you should lengthen penetration by about two times to obtain better penetration effects. (Also, as soluble penetrant is available, water rinsing is possible and onsite use is very easy.) 3. Cleaning After penetration treatment is done, remove red penetrant remained on the inspection object by using dry dustcloth, tissue paper, other absorbents or water rinsing (in case of soluble penetrant) and clean the object with dustcloth containing cleaner or tissue papers. If weld with surface not smoothed or inspection object with black film of steel and casting products are not cleaned completely, and red penetrant is remained on their surfaces, it is difficult to determine flaws correctly in developing. Use white or near-white dustcloth or tissue paper to know cleaning degree easily. Do not apply it directly to the surface of inspection object. 4. Development After cleaning red penetrant remained after penetration, apply white developer evenly to make it cover whole surface. Applied white developer is dried immediately, showing white color. As it dries, red penetrant in flaw areas is absorbed and appeared, making the position and shape of flaw marked sharply on the white powder phase. Shake white developer light before use. 5. Inspection The areas not showing red after development means that they have no flaws. Determine the kinds, size and depth of redstained areas on the basis of their shape and size. The kinds of flaw created by color fixation can not be determined by a single word, but we can show them as following.<h3 class="md-block-header-three">Cautions</h3>• Keep it away from your children. • This flammable product uses high-pressure gas.• Comply with following cautions.1. Do not use it toward fire. 2. Do not use near heater or stove. 3. Do not use in the room using fire. 4. Do not keep it in the place above 40℃. 5. Provide ventilation to use it in the closed room. 6. Do not throw it away into fire. 7. Punch the can to throw it away. 8. Do not keep it in the closed place. 9. Spraying may not work well below 5℃.

<h3><ins>Nabakem Mega Check Treatment, Penetrant &amp; Developer Set</ins></h3>
<h3><ins>Non-Destructive Testing(NDT)</ins><ins> </ins><ins> Crack Detection </ins></h3>
<h3>Comprising: </h3>
1) MEGA CHECK - TREATMENT (Cleaner) 
2. MEGA CHECK - PENETRANT (Coloring Penetrant Crack Detection Agent)
3. MEGA CHECK - DEVELOPER 
Content: Aerosol 450㎖/can&nbsp;&nbsp;
<h3><ins> Features</ins></h3>
<h3><ins>•</ins> Special equipment not required. Used anytime anywhere. 
 
• Easy-to-use. 
 
• This product changes invisible fine cracks into visible red-colored cracks, enabling you to check all cracks. 
 
• It can be used regardless of material or form of inspection object. 
 
• Easy-to-use and highly portable one touch aerosol type. 
 
• Corrosive materials not used. 
 
• Safe for aluminum alloy and magnesium alloy subject to easy corrosion. 
 
• Inspection results are maintained as they are, unless you clean them. 
 
• Aerosol product ensures clean use, making you maintain cleanliness of workplace.</h3>
<h3><ins>Uses</ins></h3>
• It can be used for nonferrous materials like porcelain, glass, synthetic resin as well as metal, iron, nonferrous metal, magnetic substance and nonmagnetic substance. 
 
• Casting parts ----- pin hole, scalding flaw, shrinkage flaw forging parts ----- forging flaw. 
 
• Weld ----- crack, failed joining. 
 
• Metal materials ----- grinding flaw, heat flaw, cutting tool crack. 
 
• Leakage check ----- tank, boiler, pipe etc.
<h3><ins>How to Use</ins><ins>• </ins></h3>
Coloring Penetration Detection Method disovers invisible flaws easily by making red penetrant liquid penetrate into surface flaw areas of inspection object, removing residual red penetrant liquid with cleaner, and developing red penetrant in flaw areas by using white developer and capillary phenomenon. 
 
• Everyone can use the detection method by following operations. 
 
1. Pre-treatment 
The dirt like dust, oil content, coating materials and rust prevents. 
penetration of red penetrant. Remove them completely with cleaner before inspection. 
Be careful of pre-treatment method to prevent surface flaw areas from being clogged. 
The more perfect the pre-treatment is, the higher the detection effects are and the easier the inspection operations. 
 
2. Penetration 
Clean the inspection object surface and dry it. 
Apply red penetrant evenly 20~30cm away from target object to make the surface covered with the penetrant. 
Penetration time is 2∼3 minutes. Application at the intervals of 3∼6 minutes ensures better effects. 
Recommended temperature of parts for inspection is about 10∼40℃. 
When you do this inspection work outdoors in winter, it is recommended that you should lengthen penetration by about two times to obtain better penetration effects. 
(Also, as soluble penetrant is available, water rinsing is possible and onsite use is very easy.) 
 
3. Cleaning 
After penetration treatment is done, remove red penetrant remained on the inspection object by using dry dustcloth, tissue paper, other absorbents or water rinsing (in case of soluble penetrant) and clean the object with dustcloth containing cleaner or tissue papers. 
If weld with surface not smoothed or inspection object with black film of steel and casting products are not cleaned completely, and red penetrant is remained on their surfaces, it is difficult to determine flaws correctly in developing. 
Use white or near-white dustcloth or tissue paper to know cleaning degree easily. 
Do not apply it directly to the surface of inspection object. 
 
4. Development 
After cleaning red penetrant remained after penetration, apply white developer evenly to make it cover whole surface. 
Applied white developer is dried immediately, showing white color. 
As it dries, red penetrant in flaw areas is absorbed and appeared, making the position and shape of flaw marked sharply on the white powder phase. 
Shake white developer light before use. 
 
5. Inspection 
The areas not showing red after development means that they have no flaws. 
Determine the kinds, size and depth of redstained areas on the basis of their shape and size. 
The kinds of flaw created by color fixation can not be determined by a single word, but we can show them as following.
<h3><ins>Cautions</ins></h3>
• Keep it away from your children. 
 
• This flammable product uses high-pressure gas.
• Comply with following cautions.
1. Do not use it toward fire. 
2. Do not use near heater or stove. 
3. Do not use in the room using fire. 
4. Do not keep it in the place above 40℃. 
 
5. Provide ventilation to use it in the closed room. 
 
6. Do not throw it away into fire. 
 
7. Punch the can to throw it away. 
 
8. Do not keep it in the closed place. 
 
9. Spraying may not work well below 5℃.

Paul Ang

Others

STANLEY

MAKITA

BOSCH

Werner

WIHA

DEWALT

Other Tools

Ladders & Platforms

Door Hardware & Locks

Other Power Tools

Other Measuring Tools

Other Fittings

Drills, Impact Drivers & Wrenches

Power Tools Accessories

Gardening Hand Tools

Desk stationery

PowerFit Industrial Pte Ltd

buyerIntroduction

NAbakem Mega Check Treatment, Penetrant & Developer Set

nabakem mega check treatment, penetrant developer set chemical testing pengujian kimia rawatan, pembangun ujian nabakem/纳巴克姆 处理、渗透剂和显影剂套装 化学测试 纳巴肯

nabakem-mega-check-treatment-penetrant-developer-set

Nabakem Mega Check - Treatment (Cleaner)

Nabakem Mega Check - Penetrant

Nabakem Mega Check - Developer

Options

Dayton 4RG90 True Union Swing Waste Water Check Valve  

<h3 class="md-block-header-three">Dayton 4RG90 True Union Swing Waste Water Check Valve </h3><ul class="md-block-unordered-list-item"><ul class="md-block-unordered-list-item"><li>Body Material: PVC</li><li>Nominal Valve Size: 1-1/2 in</li><li>3-A Standard Compliance: Not Rated</li><li>Silent Check: Standard</li><li>Maximum Pressure - Steam: Not Rated</li><li>Valve Body Style: Inline</li><li>Connection Type: Socket x Socket</li><li>For Media: Water</li><li>Mounting Orientation: Vertical</li><li>Maximum Pressure - Operating: 125 psi</li></ul></ul>

<h3>Dayton 4RG90 True Union Swing Waste Water Check Valve&nbsp;&nbsp;</h3>
<ul>
<li>Body Material: PVC</li>
<li>Nominal Valve Size: 1-1/2 in</li>
<li>3-A Standard Compliance: Not Rated</li>
<li>Silent Check: Standard</li>
<li>Maximum Pressure - Steam: Not Rated</li>
<li>Valve Body Style: Inline</li>
<li>Connection Type: Socket x Socket</li>
<li>For Media: Water</li>
<li>Mounting Orientation: Vertical</li>
<li>Maximum Pressure - Operating: 125 psi</li>
</ul>

Grainger

Dayton 4RG90 True Union Swing Waste Water Check Valve

dayton 4rg90 true union swing waste water check valve katup pemeriksa air limbah valves dayton/代顿 旋启式废水止回阀 代顿

dayton-4rg90-true-union-swing-waste-water-check-valve

RS PRO T&M Selection Guide 2020_UK

Datasheet

Instruction Manual

Siemens

DEUTSCH

Facom

RAPID

SCHNEIDER ELECTRIC

ECLIPSE TOOLS

Screw

O Ring

Plugs & Connector 

Surface Mount Resistors

Bolts

Panel Mount Indicators 

Button Switch

Electrical Wire 

Junction & Enclosure Box

Aluminium Capacitors

RS Components ETH SG

Rs Pro 1225157 RM-804 Gpib Ohmmeter, 5000 ? Max, 1?? Resolution

rs pro 1225157 rm-804 gpib ohmmeter, 5000 max, 1?? resolution maksimal resolusi multimeters multimeter maks, 欧姆表，5000？最大，1？？解决 万用表 rs专业版

rs-pro-1225157-rm-804-gpib-ohmmeter-5000-max-1-resolution

Waterproof Professional Series pH/EC/TDS/Temp Meter Pro Kit

 The COM-300 digital water quality meter is a professional grade level pH/EC/TDS/Temp meter ideal for all water quality testing, hydroponics, water purification applications, wastewater regulation, aquaculture, colloidal silver, labs & scientific testing, pools & spas, ecology testing, boilers & cooling towers, water treatment and more. Now, come in compact portable case.

The Pro Kit includes calibration solutions as well to make ensure your testing is always on the point.

Application: Aquaculture, Aquarium, Drinking Water, Food & Beverage, Hydroponics, Industrial, Pool/Spa, Water Treatment

Measures Potential Hydrogen (pH), Electrical Conductivity (EC), Total Dissolved Solids (TDS), Salinity and Temperature

Five scales: pH, µS, mS, ppm 0.5 (NaCl) Scale & 0.7 (442™) Scale

Automatic Temperature Compensation (ATC) using three temperature coefficients

Digital Calibration (push button) to any point within the meter’s range

Auto-off function, data-hold function and low-battery indicator

Display: large and easy-to-read LCD screen includes simultaneous temperature reading

Includes translucent cap, 2 (AAA) alkaline batteries, pH 4 & 7 calibration solutions, CP-1000 solution, pH storage solution and lanyard

TDS Range: 0 – 8560 ppm (0.7 Scale); 0 – 5000 ppm (0.5 Scale)

Resolution: 0-99: 0.1 µS/ppm/ 0.01mS ; 100-999: 1 µS/ppm; 1000-9990: 10 µS/ppm. Temp. resolution is 0.1 °C/F

EC to TDS Conversion Factor: Non-linear conversions for KCl, 442TM or NaCl solutions, selected by the user.

Probe: Detachable platinum electrodes & pH glass sensor with reference tube electrodes

Housing: IP-67 Waterproof (submersible; floats)

Power source: 2 x Triple A (AAA) included

Dimensions: 18.5 x 3.4 x 3.4 cm (7.3 x 1.3 x 1.3 inches)

442 is a registered trademark of the Myron L Company.

1 packet of pH Storage Solution (PH-PSTOR)

1 packet of pH 4 Buffer Solution (PH-P4)

<h1 class="md-block-header-one">HM Digital COM-300PK </h1>Waterproof Professional Series pH/EC/TDS/Temp Meter Pro Kit The COM-300 digital water quality meter is a professional grade level pH/EC/TDS/Temp meter ideal for all water quality testing, hydroponics, water purification applications, wastewater regulation, aquaculture, colloidal silver, labs &amp; scientific testing, pools &amp; spas, ecology testing, boilers &amp; cooling towers, water treatment and more. Now, come in compact portable case.The Pro Kit includes calibration solutions as well to make ensure your testing is always on the point.Application: Aquaculture, Aquarium, Drinking Water, Food &amp; Beverage, Hydroponics, Industrial, Pool/Spa, Water TreatmentFeatures:<ul class="md-block-unordered-list-item"><li>Measures Potential Hydrogen (pH), Electrical Conductivity (EC), Total Dissolved Solids (TDS), Salinity and Temperature</li><li>Five scales: pH, µS, mS, ppm 0.5 (NaCl) Scale &amp; 0.7 (442™) Scale</li><li>Automatic Temperature Compensation (ATC) using three temperature coefficients</li><li>Waterproof housing (IP-67 rating)</li><li>Digital Calibration (push button) to any point within the meter’s range</li><li>Auto-off function, data-hold function and low-battery indicator</li><li>Display: large and easy-to-read LCD screen includes simultaneous temperature reading</li><li>Replaceable Sensor (model SP-C3)</li><li>Factory Calibrated (pH/EC/TDS)</li><li>Includes translucent cap, 2 (AAA) alkaline batteries, pH 4 &amp; 7 calibration solutions, CP-1000 solution, pH storage solution and lanyard</li></ul>Specifications:<ul class="md-block-unordered-list-item"><li>pH Range: 0 – 14 pH</li><li>EC Range: 0 – 9990 µS; 0 – 9.99 mS</li><li>TDS Range: 0 – 8560 ppm (0.7 Scale); 0 – 5000 ppm (0.5 Scale)</li><li>Temperature Range: 0-55 °C; 32-130°F</li><li>Resolution: 0-99: 0.1 µS/ppm/ 0.01mS ; 100-999: 1 µS/ppm; 1000-9990: 10 µS/ppm. Temp. resolution is 0.1 °C/F</li><li>Accuracy: +/- 2%</li><li>EC to TDS Conversion Factor: Non-linear conversions for KCl, 442TM or NaCl solutions, selected by the user.</li><li>Probe: Detachable platinum electrodes &amp; pH glass sensor with reference tube electrodes</li><li>Housing: IP-67 Waterproof (submersible; floats)</li><li>Power source: 2 x Triple A (AAA) included</li><li>Dimensions: 18.5 x 3.4 x 3.4 cm (7.3 x 1.3 x 1.3 inches)</li><li>Weight: 101.5g (3.6 oz)</li><li>442 is a registered trademark of the Myron L Company.</li></ul>Includes:<ul class="md-block-unordered-list-item"><li>1 compact portable case</li><li>1 translucent cap</li><li>2 (AAA) alkaine batteries</li><li>1 packet of pH Storage Solution (PH-PSTOR)</li><li>1 packet of pH 7 Buffer Solution (PH-P7)</li><li>1 packet of pH 4 Buffer Solution (PH-P4)</li><li>1 lanyard</li></ul>

&nbsp;
<h1>HM Digital COM-300PK </h1>
Waterproof Professional Series pH/EC/TDS/Temp Meter Pro Kit
&nbsp;The COM-300 digital water quality meter is a professional grade level pH/EC/TDS/Temp meter ideal for all water quality testing, hydroponics, water purification applications, wastewater regulation, aquaculture, colloidal silver, labs &amp; scientific testing, pools &amp; spas, ecology testing, boilers &amp; cooling towers, water treatment and more. Now, come in compact portable case.
The Pro Kit includes calibration solutions as well to make ensure your testing is always on the point.
Application: Aquaculture, Aquarium, Drinking Water, Food &amp; Beverage, Hydroponics, Industrial, Pool/Spa, Water Treatment
Features:
<ul>
<li>Measures Potential Hydrogen (pH), Electrical Conductivity (EC), Total Dissolved Solids (TDS), Salinity and Temperature</li>
<li>Five scales: pH, µS, mS, ppm 0.5 (NaCl) Scale &amp; 0.7 (442™) Scale</li>
<li>Automatic Temperature Compensation (ATC) using three temperature coefficients</li>
<li>Waterproof housing (IP-67 rating)</li>
<li>Digital Calibration (push button) to any point within the meter’s range</li>
<li>Auto-off function, data-hold function and low-battery indicator</li>
<li>Display: large and easy-to-read LCD screen includes simultaneous temperature reading</li>
<li>Replaceable Sensor (model SP-C3)</li>
<li>Factory Calibrated (pH/EC/TDS)</li>
<li>Includes translucent cap, 2 (AAA) alkaline batteries, pH 4 &amp; 7 calibration solutions, CP-1000 solution, pH storage solution and lanyard</li>
</ul>
Specifications:
<ul>
<li>pH Range: 0 – 14 pH</li>
<li>EC Range: 0 – 9990 µS; 0 – 9.99 mS</li>
<li>TDS Range: 0 – 8560 ppm (0.7 Scale); 0 – 5000 ppm (0.5 Scale)</li>
<li>Temperature Range: 0-55 °C; 32-130°F</li>
<li>Resolution: 0-99: 0.1 µS/ppm/ 0.01mS ; 100-999: 1 µS/ppm; 1000-9990: 10 µS/ppm. Temp. resolution is 0.1 °C/F</li>
<li>Accuracy: +/- 2%</li>
<li>EC to TDS Conversion Factor: Non-linear conversions for KCl, 442TM or NaCl solutions, selected by the user.</li>
<li>Probe: Detachable platinum electrodes &amp; pH glass sensor with reference tube electrodes</li>
<li>Housing: IP-67 Waterproof (submersible; floats)</li>
<li>Power source: 2 x Triple A (AAA) included</li>
<li>Dimensions: 18.5 x 3.4 x 3.4 cm (7.3 x 1.3 x 1.3 inches)</li>
<li>Weight: 101.5g (3.6 oz)</li>
<li>442 is a registered trademark of the Myron L Company.</li>
</ul>
Includes:
<ul>
<li>1 compact portable case</li>
<li>1 translucent cap</li>
<li>2 (AAA) alkaine batteries</li>
<li>1 packet of pH Storage Solution (PH-PSTOR)</li>
<li>1 packet of pH 7 Buffer Solution (PH-P7)</li>
<li>1 packet of pH 4 Buffer Solution (PH-P4)</li>
<li>1 lanyard</li>
</ul>

HM COM300PK Datasheet

YK Yeo

Humidity & Temperature

Air Quality Meters

EMF & Frequency Meters

Suzie

Hm Digital COM-300PK Ph / Ec / Tds / Temp Meter Pro Kit

hm digital com-300pk ph ec tds temp meter pro kit pengukur suhu flow meters aliran digital/hm数码 温度计专业套件 流量和ph计 hm数码

hm-digital-com-300pk-ph-ec-tds-temp-meter-pro-kit

Leather Care Liniment No. 1 is a natural, water-based concoction of vital oils, nutrients, and a few mystical properties. This environmentally friendly recipe absorbs gently, replenishing natural oils and bringing your quality leather back from the dead to near new condition. Rich and pleasantly scented, Formula No. 1 will keep your leather healthy, supple and soft for decades to come. This recipe may be used as often as desired to clean,condition and refresh leather items such as bags, shoes, boots, luggage, purses, saddle/tack and leather apparel.

.Includes a FREE reusable cotton terry leather conditioner applicator pad for best results!

A LEATHER CONDITIONER FOR ALL KINDS OF LEATHER

Leather Care Liniment uses a light emulsion of oils and water to gently condition leather. Of all of Leather Milk’s recipes, this is the ideal conditioner for leather of more natural qualities, lighter hues, and unfinished leather, due to its gentle yet highly enriching effects. In fact, Liniment’s versatility is immediately disarming, adapting with ease to beautify and enrich nearly any kind of leather, from full grainand vegetable-tanned to exotic crocodile and deerskin. This recipe is a true Jack-of-All-Trades. If you’ve got leather, Liniment’s got you covered.

ENVIRONMENTALLY FRIENDLY, ALL-NATURAL, SAFE FOR HUMAN SKIN!

Brewed to perfection with all-natural ingredients and an optimal pH-balanced recipe, this environmentally friendly leather conditioner stands out from the crowd for its distinctive style: a rich, creamy consistency laced with scents of cherry and almond. The cream texture, designed for easy application and maximum absorption, will melt into your leather as easily as butter on hot bread. This conditioning experience is made even more pleasurable with a tease of sweet fragrance –a subtle sensation lasting only as long as long as the conditioner takes to absorb, so that it will not affect your leather’s natural scents. Made with FDA approved cosmetic grade ingredients safe for human skin, we’ve even watched people drink our Leather Milk recipe straight out of the bottle like actual milk! We wouldn’t personally advise doing this, of course!

Like all of Chamberlain’s leather conditioners, Recipe No.1 should enrich your leather’s color and give it the soft, supple texture that it deserves. As this recipe absorbs and conditions, it will strengthen the fibers of your leather, making it grow stronger, and live longer. A light cleaning element permits Leather Care Liniment to give your leather a gentle surface cleansing, and its protective properties allow it to moderately repel routine contaminants, like dust and dirt.

If you have already used Leather Care Liniment, you will not need to apply any other leather conditioners to your leather, at least until it is ready to be conditioned again. All Leather Milk products are made in USA.

Leather Care Liniment should not be treated as a deep cleaner. This means that any stain below the leather’s surface (or any stain that has had time to set) will probably not come out with this recipe. Leather Care Liniment will remove light surface contaminants, such as dust, but is not intended for any cleaning task beyond routine, spot dusting. For stains below the leather’s surface, use our .

Leather Care Liniment should neither be treated as a heavy protector or water repellent, and will offer less protection against rain, snow, and thick mud. a heavy duty conditioner, is recommended for leather exposed to harsh environments and weather.

Leather Care Liniment is not designed for nubuck, suede, napped leather, or other extremely soft leathers.

IS LEATHER CARE LINIMENT RIGHT FOR MY LEATHER?

Leather Care Liniment is most at home on natural and cowhide leather, although its versatile qualities give it competence on a wide range of leather types. This recipe is particularly suited for conditioning lighter colored and unfinished leathers like aniline and semi-aniline leather, due to its gentler nature. Like any leather conditioner, Liniment may still darken lighter colored or unfinished leathers to a degree, but will usually leave only minimal effects and lighten back up within a few days of use. This Leather Milk recipe can be used safely on most any type of leather, but remember to test it first.If your leather is unfinished, it may be wise to test your leather in multiple discreet places.

Liniment is best used on leather exposed to moderate climates and infrequent exposure to weather. Use this recipe if you want to beautify your leather and don’t expect it to see much harsh action. If you expect your leather to encounter some Hollywood style drama, Water Protectant No. 3 will be your best friend.

Long and short, if you’ve got any kind of leather, or a wide range of types, you need Leather Care Liniment. Test it first and use it well – and it will save your hide!

Leather Care Liniment No. 1 is a natural, water-based concoction of vital oils, nutrients, and a few mystical properties. This environmentally friendly recipe absorbs gently, replenishing natural oils and bringing your quality leather back from the dead to near new condition. Rich and pleasantly scented, Formula No. 1 will keep your leather healthy, supple and soft for decades to come. This recipe may be used as often as desired to clean,condition and refresh leather items such as bags, shoes, boots, luggage, purses, saddle/tack and leather apparel.Made in USA.Available in 6 oz bottles.Includes a FREE reusable cotton terry leather conditioner applicator pad for best results! <h2 class="md-block-header-two">WHAT LEATHER CARE LINIMENT DOES</h2>A LEATHER CONDITIONER FOR ALL KINDS OF LEATHERLeather Care Liniment uses a light emulsion of oils and water to gently condition leather. Of all of Leather Milk’s recipes, this is the ideal conditioner for leather of more natural qualities, lighter hues, and unfinished leather, due to its gentle yet highly enriching effects. In fact, Liniment’s versatility is immediately disarming, adapting with ease to beautify and enrich nearly any kind of leather, from full grainand vegetable-tanned to exotic crocodile and deerskin. This recipe is a true Jack-of-All-Trades. If you’ve got leather, Liniment’s got you covered.ENVIRONMENTALLY FRIENDLY, ALL-NATURAL, SAFE FOR HUMAN SKIN!Brewed to perfection with all-natural ingredients and an optimal pH-balanced recipe, this environmentally friendly leather conditioner stands out from the crowd for its distinctive style: a rich, creamy consistency laced with scents of cherry and almond. The cream texture, designed for easy application and maximum absorption, will melt into your leather as easily as butter on hot bread. This conditioning experience is made even more pleasurable with a tease of sweet fragrance –a subtle sensation lasting only as long as long as the conditioner takes to absorb, so that it will not affect your leather’s natural scents. Made with FDA approved cosmetic grade ingredients safe for human skin, we’ve even watched people drink our Leather Milk recipe straight out of the bottle like actual milk! We wouldn’t personally advise doing this, of course!STRONGER, RICHER LEATHER; MADE IN USALike all of Chamberlain’s leather conditioners, Recipe No.1 should enrich your leather’s color and give it the soft, supple texture that it deserves. As this recipe absorbs and conditions, it will strengthen the fibers of your leather, making it grow stronger, and live longer. A light cleaning element permits Leather Care Liniment to give your leather a gentle surface cleansing, and its protective properties allow it to moderately repel routine contaminants, like dust and dirt.If you have already used Leather Care Liniment, you will not need to apply any other leather conditioners to your leather, at least until it is ready to be conditioned again. All Leather Milk products are made in USA.<h2 class="md-block-header-two">WHAT LEATHER CARE LINIMENT DOES NOT DO</h2>Leather Care Liniment should not be treated as a deep cleaner. This means that any stain below the leather’s surface (or any stain that has had time to set) will probably not come out with this recipe. Leather Care Liniment will remove light surface contaminants, such as dust, but is not intended for any cleaning task beyond routine, spot dusting. For stains below the leather’s surface, use our .Leather Care Liniment should neither be treated as a heavy protector or water repellent, and will offer less protection against rain, snow, and thick mud. a heavy duty conditioner, is recommended for leather exposed to harsh environments and weather.Leather Care Liniment is not designed for nubuck, suede, napped leather, or other extremely soft leathers.<h2 class="md-block-header-two">IS LEATHER CARE LINIMENT RIGHT FOR MY LEATHER?</h2>Leather Care Liniment is most at home on natural and cowhide leather, although its versatile qualities give it competence on a wide range of leather types. This recipe is particularly suited for conditioning lighter colored and unfinished leathers like aniline and semi-aniline leather, due to its gentler nature. Like any leather conditioner, Liniment may still darken lighter colored or unfinished leathers to a degree, but will usually leave only minimal effects and lighten back up within a few days of use. This Leather Milk recipe can be used safely on most any type of leather, but remember to test it first.If your leather is unfinished, it may be wise to test your leather in multiple discreet places.Liniment is best used on leather exposed to moderate climates and infrequent exposure to weather. Use this recipe if you want to beautify your leather and don’t expect it to see much harsh action. If you expect your leather to encounter some Hollywood style drama, Water Protectant No. 3 will be your best friend.Long and short, if you’ve got any kind of leather, or a wide range of types, you need Leather Care Liniment. Test it first and use it well – and it will save your hide!

Leather Care Liniment No. 1 is a natural, water-based concoction of vital oils, nutrients, and a few mystical properties. This environmentally friendly recipe absorbs gently, replenishing natural oils and bringing your quality leather back from the dead to near new condition. Rich and pleasantly scented, Formula No. 1 will keep your leather healthy, supple and soft for decades to come. This recipe may be used as often as desired to clean,condition and refresh leather items such as bags, shoes, boots, luggage, purses, saddle/tack and leather apparel.
Made in USA.
Available in 6 oz bottles
.Includes a FREE reusable cotton terry leather conditioner applicator pad for best results!
&nbsp;
<h2>WHAT LEATHER CARE LINIMENT DOES</h2>
<ins>A LEATHER CONDITIONER FOR ALL KINDS OF LEATHER</ins>
Leather Care Liniment uses a light emulsion of oils and water to gently condition leather. Of all of Leather Milk’s recipes, this is the ideal conditioner for leather of more natural qualities, lighter hues, and unfinished leather, due to its gentle yet highly enriching effects. In fact, Liniment’s versatility is immediately disarming, adapting with ease to beautify and enrich nearly any kind of leather, from full grainand vegetable-tanned to exotic crocodile and deerskin. This recipe is a true Jack-of-All-Trades. If you’ve got leather, Liniment’s got you covered.
<ins>ENVIRONMENTALLY FRIENDLY, ALL-NATURAL, SAFE FOR HUMAN SKIN!</ins>
Brewed to perfection with all-natural ingredients and an optimal pH-balanced recipe, this environmentally friendly leather conditioner stands out from the crowd for its distinctive style: a rich, creamy consistency laced with scents of cherry and almond. The cream texture, designed for easy application and maximum absorption, will melt into your leather as easily as butter on hot bread. This conditioning experience is made even more pleasurable with a tease of sweet fragrance –a subtle sensation lasting only as long as long as the conditioner takes to absorb, so that it will not affect your leather’s natural scents. Made with FDA approved cosmetic grade ingredients safe for human skin, we’ve even watched people drink our Leather Milk recipe straight out of the bottle like actual milk! We wouldn’t personally advise doing this, of course!
<ins>STRONGER, RICHER LEATHER; MADE IN USA</ins>
Like all of Chamberlain’s leather conditioners, Recipe No.1 should enrich your leather’s color and give it the soft, supple texture that it deserves. As this recipe absorbs and conditions, it will strengthen the fibers of your leather, making it grow stronger, and live longer. A light cleaning element permits Leather Care Liniment to give your leather a gentle surface cleansing, and its protective properties allow it to moderately repel routine contaminants, like dust and dirt.
If you have already used Leather Care Liniment, you will not need to apply any other leather conditioners to your leather, at least until it is ready to be conditioned again. All Leather Milk products are made in USA.
<h2>WHAT LEATHER CARE LINIMENT DOES NOT DO</h2>
Leather Care Liniment should not be treated as a deep cleaner. This means that any stain below the leather’s surface (or any stain that has had time to set) will probably not come out with this recipe. Leather Care Liniment will remove light surface contaminants, such as dust, but is not intended for any cleaning task beyond routine, spot dusting. For stains below the leather’s surface, use our .
Leather Care Liniment should neither be treated as a heavy protector or water repellent, and will offer less protection against rain, snow, and thick mud. a heavy duty conditioner, is recommended for leather exposed to harsh environments and weather.
Leather Care Liniment is not designed for nubuck, suede, napped leather, or other extremely soft leathers.
<h2>IS LEATHER CARE LINIMENT RIGHT FOR MY LEATHER?</h2>
Leather Care Liniment is most at home on natural and cowhide leather, although its versatile qualities give it competence on a wide range of leather types. This recipe is particularly suited for conditioning lighter colored and unfinished leathers like aniline and semi-aniline leather, due to its gentler nature. Like any leather conditioner, Liniment may still darken lighter colored or unfinished leathers to a degree, but will usually leave only minimal effects and lighten back up within a few days of use. This Leather Milk recipe can be used safely on most any type of leather, but remember to test it first.If your leather is unfinished, it may be wise to test your leather in multiple discreet places.
Liniment is best used on leather exposed to moderate climates and infrequent exposure to weather. Use this recipe if you want to beautify your leather and don’t expect it to see much harsh action. If you expect your leather to encounter some Hollywood style drama, Water Protectant No. 3 will be your best friend.
Long and short, if you’ve got any kind of leather, or a wide range of types, you need Leather Care Liniment. Test it first and use it well – and it will save your hide!

Multi Purpose Cleaners

Disinfectants and Sanitisers

Stain Removers

Gifts

General Furniture

Car Care Products

Personal Care Products

Office goods

ajay

Chamberlains Leather Milk Leather Care Liniment No. 1 – Premium Leather Conditioner

chamberlains leather milk care liniment no. premium conditioner kondisioner kulit leather, fabric upholstery perawatan kulit, kain dan pelapis leathermilk perapi fabrik penjagaan upholsteri 张伯伦皮革牛奶皮革护理剂1号–高级皮革护发素 皮革，织物和室内装饰 张伯伦皮革牛奶