Araldite

Adhesive

adhesive

Adhesive Glue

adhesive-glue

Epoxy

epoxy

Araldite 2031-1 Epoxy Paste Structural Adhesive - 380ml cartridge

100°C / 212°F Maximum continuous operating temperature*

 * For the maximum continuous operating temperature, we consider the maximum temperature for which the residual lap shear strength is 1/3 of the lap shear strength at room temperature or the temperature for which the residual lap shear strength is 5 MPa. 

Araldite® 2031-1 is a 1:1 mix ratio, black, toughened, thixotropic (non-slumping up to 10mm thickness) adhesive suitable for metal and composite bonding with good adhesion on Polyamides. It has low shrinkage characteristics and a high chemical resistance.

Embedded with spacers (glass beads) it retains it's integrity well, will not sag/gap or run, and has enhanced bond strength at larger bondlines.  It is particularly suitable for GRP (Glass Reinforced Plastics) Polyamide and SMC (Sheet Molded Compounds) bonding.

The 380ml Cartridges are 1:1 ratio, and are designed to work best with a 380ml cartridge Dispenser with a 1:1 ratio plunger.  We strongly advise you use a 380ml Dispenser WITH a 1:1 ratio plunger for this cartridges.  If you do not have one, please check out our 1:1 ratio Dispensers, all are excellent products and have our 'it's good' seal of approval.

Suitable for metal and composite bonding, good adhesion onto polyamides

Contains spacers to ensure a minimum bond line thickness of 0.05 mm

Araldite 2031 may be stored for up to 3 years at room temperature provided the components are stored in sealed containers. The expiry date is indicated on the label.

For additional information, consult the TDS and SDS.

It is particularly suitable for GRP, CFRP and SMC bonding.

<h3 class="md-block-header-three">Araldite 2031-1 Epoxy Paste Structural Adhesive - 380ml cartridge</h3> Performance Specifications<ul class="md-block-unordered-list-item"><li>Two-component Epoxy Technology</li><li>60 mins Pot life at RT</li><li>3 hrs Fixture time at RT</li><li>10 mm Gap filling</li><li>100°C / 212°F Maximum continuous operating temperature*</li><li>23 MPa / 3,335 psi Tensile strength</li><li>1 000 MPa / 145,038 psi Tensile modulus</li><li>ca. 12% Elongation at break</li><li> * For the maximum continuous operating temperature, we consider the maximum temperature for which the residual lap shear strength is 1/3 of the lap shear strength at room temperature or the temperature for which the residual lap shear strength is 5 MPa. </li></ul>Araldite® 2031-1 is a 1:1 mix ratio, black, toughened, thixotropic (non-slumping up to 10mm thickness) adhesive suitable for metal and composite bonding with good adhesion on Polyamides. It has low shrinkage characteristics and a high chemical resistance.Embedded with spacers (glass beads) it retains it&#x27;s integrity well, will not sag/gap or run, and has enhanced bond strength at larger bondlines.  It is particularly suitable for GRP (Glass Reinforced Plastics) Polyamide and SMC (Sheet Molded Compounds) bonding.The 380ml Cartridges are 1:1 ratio, and are designed to work best with a 380ml cartridge Dispenser with a 1:1 ratio plunger.  We strongly advise you use a 380ml Dispenser WITH a 1:1 ratio plunger for this cartridges.  If you do not have one, please check out our 1:1 ratio Dispensers, all are excellent products and have our &#x27;it&#x27;s good&#x27; seal of approval.Key Features<ul class="md-block-unordered-list-item"><li>Thixotropic - non slumping</li><li>Toughened adhesive, resilient bond</li><li>Suitable for metal and composite bonding, good adhesion onto polyamides</li><li>High Resistance to chemicals </li><li>Low shrinkage</li><li>Contains spacers to ensure a minimum bond line thickness of 0.05 mm</li></ul>Araldite 2031 may be stored for up to 3 years at room temperature provided the components are stored in sealed containers. The expiry date is indicated on the label.For additional information, consult the TDS and SDS.It is particularly suitable for GRP, CFRP and SMC bonding.

<h3><ins>Araldite 2031-1 Epoxy Paste Structural Adhesive - 380ml cartridge</ins></h3>
&nbsp;Performance Specifications
<ul>
<li>Two-component Epoxy Technology</li>
<li>60 mins Pot life at RT</li>
<li>3 hrs Fixture time at RT</li>
<li>10 mm Gap filling</li>
<li>100°C / 212°F Maximum continuous operating temperature*</li>
<li>23 MPa / 3,335 psi Tensile strength</li>
<li>1 000 MPa / 145,038 psi Tensile modulus</li>
<li>ca. 12% Elongation at break</li>
<li>&nbsp;* For the maximum continuous operating temperature, we consider the maximum temperature for which the residual lap shear strength is 1/3 of the lap shear strength at room temperature or the temperature for which the residual lap shear strength is 5 MPa.&nbsp;</li>
</ul>
Araldite® 2031-1 is a 1:1 mix ratio, black, toughened, thixotropic (non-slumping up to 10mm thickness) adhesive suitable for metal and composite bonding with good adhesion on Polyamides. It has low shrinkage characteristics and a high chemical resistance.
Embedded with spacers (glass beads) it retains it's integrity well, will not sag/gap or run, and has enhanced bond strength at larger bondlines.  It is particularly suitable for GRP (Glass Reinforced Plastics) Polyamide and SMC (Sheet Molded Compounds) bonding.
The 380ml Cartridges are 1:1 ratio, and are designed to work best with a 380ml cartridge Dispenser with a 1:1 ratio plunger.  We strongly advise you use a 380ml Dispenser WITH a 1:1 ratio plunger for this cartridges.  If you do not have one, please check out our 1:1 ratio Dispensers, all are excellent products and have our 'it's good' seal of approval.
Key Features
<ul>
<li>Thixotropic - non slumping</li>
<li>Toughened adhesive, resilient bond</li>
<li>Suitable for metal and composite bonding, good adhesion onto polyamides</li>
<li>High Resistance to chemicals </li>
<li>Low shrinkage</li>
<li>Contains spacers to ensure a minimum bond line thickness of 0.05 mm</li>
</ul>
Araldite 2031 may be stored for up to 3 years at room temperature provided the components are stored in sealed containers. The expiry date is indicated on the label.
For additional information, consult the TDS and SDS.
It is particularly suitable for GRP, CFRP and SMC bonding.

Paul Ang

Others

Werner

STANLEY

MAKITA

BOSCH

Hitachi

KING'S

SHOWY

Hikoki

Other Tools

Other Construction

Ladders & Platforms

Grinders

Other Measuring Tools

Drills, Impact Drivers & Wrenches

Plumbing Tools & Equipment

Safety Shoes

Vehicle Accessories

Safety Gloves

PowerFit Industrial Pte Ltd

buyerIntroduction

Araldite 2031-1 2-part Epoxy Paste Structural Adhesive - 380ml Cartridge

araldite 2031-1 2-part epoxy paste structural adhesive 380ml cartridge perekat struktural pasta epoksi bagian kartrid glue lem bahagian pes pelekat struktur kartrij gam 部分环氧糊状结构胶 墨盒 胶水 爱牢达

araldite-2031-1-2-part-epoxy-paste-structural-adhesive-380ml-cartridge

Araldite 2011 2-part Epoxy 5oml Cartridge applicator

Araldite 2011 2-part Epoxy 5oml Cartridge applicator

Araldite 2011 2-part Epoxy 5oml Cartridge applicator

WIHA

DEWALT

Door Hardware & Locks

Other Power Tools

Other Fittings

Power Tools Accessories

Gardening Hand Tools

Desk stationery

Araldite 2011 2-part Epoxy 5oml Cartridge Applicator

araldite 2011 2-part epoxy 5oml cartridge applicator aplikator kartrid bagian adhesive glue lem perekat kartrij epoksi bahagian gam pelekat araldite/爱牢达 部分环氧树脂 墨盒涂抹器 胶水 爱牢达

araldite-2011-2-part-epoxy-5oml-cartridge-applicator

Araldite 4min Rapid Steel 2x15ml 9555242209939

High Performance two-part epoxy adhesive. 

Waterproof, Heat and Chemical resistant. 

<h3 class="md-block-header-three">Araldite 4min Rapid Steel 2x15ml 9555242209939</h3><h3 class="md-block-header-three">High Performance two-part epoxy adhesive. </h3><ul class="md-block-unordered-list-item"><li>Hardens in 10minutes </li><li>Waterproof, Heat and Chemical resistant. </li><li>Colour: Metallic Grey </li><li>Will not conduct electricity </li><li>Easy to machine </li><li>Gap filling </li></ul>

<h3>Araldite 4min Rapid Steel 2x15ml 9555242209939</h3>
<h3>High Performance two-part epoxy adhesive.&nbsp;</h3>
<ul>
<li>Hardens in 10minutes&nbsp;</li>
<li>Waterproof, Heat and Chemical resistant.&nbsp;</li>
<li>Colour: Metallic Grey&nbsp;&nbsp;</li>
<li>Will not conduct electricity&nbsp;&nbsp;</li>
<li>Easy to machine&nbsp;</li>
<li>Gap filling&nbsp;&nbsp;</li>
</ul>

Jerry

BLACK AND DECKER

SELLEYS

ARMORALL

CLABER

Bona

Multi Purpose Cleaners

Drill Bits & Drill Bit Sets

Hooks & Strips

Cleaning Tools

Stain Removers

Vacuums & Floor Care

Polishing Liquids

Padlocks & Lockout Devices

Car Care Products

araldite 4min rapid steel 2x15ml 9555242209939 menit baja cepat epoxy epoksi araldite/爱牢达人 快速钢 环氧胶 爱牢达

araldite-4min-rapid-steel-2x15ml-9555242209939

Araldite 2011 epoxy structural adhesive is a slow set/slow cure, multipurpose, thinner, low-viscosity, room temperature setting, epoxy adhesive with high strength and toughness. This Araldite 2-hour epoxy is ideal to bond with a wide variety of materials, including most metals, ceramics, plastics, glass, rubber, stone, rock, ceramic, concrete, foams, glass, GRP, carbon fiber, fiberglass, Teflon and wood. It has a good electrical resistance and heat resistance and provides a long 2-hour working life. Once thoroughly mixed, it leaves a translucent pale yellow colored bond.


Araldite 2011 epoxy is a two-part, multipurpose, electrically insulating, structural epoxy adhesive. It cures at temperatures ranging from 20 to 180 degrees Celsius with no release or emissions of unstable or volatile compounds. It boasts a wide variety of users, from DIY & craftsman to Aerospace, Space, Aircraft, Manufacturing, and many other industrial applications.

The strength and the durability of this epoxy formula are exceptional but also practically dependent on what is being bonded together. If it's a weak or poorly-treated or poorly-prepared surface to begin with, the surface will fail before the epoxy. All grease, dirt, oil, paint, finishes, and coatings need to be removed before applying this epoxy formula. It can be applied manually using a spatula or dispensing applicator or mechanically or robotically to dry pretreated joints. For the greatest shear and peel strength, it is recommended to apply a layer of this formula of about .05 to .10 mm thick. As soon as the Araldite 2011 is applied, the joints should be immediately assembled and clamped, allowing proper cure.

Araldite 2011 is also known by its bulk resin names, Araldite AW106 resin & Araldite HV953U hardener. And Araldite 2011 can be ordered in a variety of package sizes: 50ml cartridges as Araldite 2859208, 200ml cartridges as Araldite 2859408, 1-Quart pail kits as Araldite 744908, and 2-gallon pail kits as Araldite 161040

Please Note:  These cartridges are designed to work best with a 50ml or 200ml cartridge Dispenser, respectively.  We advise you use a 50ml or 200ml Dispenser for all respective cartridges.  If you do not have one, please check out our Dispensers, all are excellent products and have our 'it's good' seal of approval.

If you prefer not to use a Dispenser, all 50ml cartridge orders we sell will come with one manual hand plunger, as pictured, that you can use for fast small jobs.  But the 200ml cartridges really need to use a 200ml Dispenser, they're just too big to easily use without the dispenser.

Excellent General Purpose Slow-Set Epoxy for Craftsmen, DIY, and Industrial uses

Electrically Insulating (does not conduct)

Part Numbers : 50ml Cartridges - 2859208

Product Dimensions : 50ml Cartridges: 6 x 2 x 1 inches

Included Components : Quick Connect Fixtures 

Teflon Bonding Using Araldite 2011 as the adhesive has proven successful when the proper procedures are followed. 

Surface Preparation: Virgin PTFE is white in color and will not readily bond unless chemically etched with etchants such as Tetra Etch. Bonding other materials to teflon will also require proper surface preparation.

Adhesive Application: Araldite 2011, aka, Araldite AW106 resin and HV 953U hardener has been proved to work well. The adhesive should be applied both to both surfaces and be spread as uniformly as possible by means of a serrated spatula. 

Curing: Application of even, light clamping pressure while adhesive is recommended. 

Clean-up: Squeeze out adhesive, not cleaned prior to hardening can be accomplished using traditional machining or sanding methods.

Araldite 2011 epoxy structural adhesive is a slow set/slow cure, multipurpose, thinner, low-viscosity, room temperature setting, epoxy adhesive with high strength and toughness. This Araldite 2-hour epoxy is ideal to bond with a wide variety of materials, including most metals, ceramics, plastics, glass, rubber, stone, rock, ceramic, concrete, foams, glass, GRP, carbon fiber, fiberglass, Teflon and wood. It has a good electrical resistance and heat resistance and provides a long 2-hour working life. Once thoroughly mixed, it leaves a translucent pale yellow colored bond. Araldite 2011 epoxy is a two-part, multipurpose, electrically insulating, structural epoxy adhesive. It cures at temperatures ranging from 20 to 180 degrees Celsius with no release or emissions of unstable or volatile compounds. It boasts a wide variety of users, from DIY &amp; craftsman to Aerospace, Space, Aircraft, Manufacturing, and many other industrial applications.The strength and the durability of this epoxy formula are exceptional but also practically dependent on what is being bonded together. If it&#x27;s a weak or poorly-treated or poorly-prepared surface to begin with, the surface will fail before the epoxy. All grease, dirt, oil, paint, finishes, and coatings need to be removed before applying this epoxy formula. It can be applied manually using a spatula or dispensing applicator or mechanically or robotically to dry pretreated joints. For the greatest shear and peel strength, it is recommended to apply a layer of this formula of about .05 to .10 mm thick. As soon as the Araldite 2011 is applied, the joints should be immediately assembled and clamped, allowing proper cure.Araldite 2011 is also known by its bulk resin names, Araldite AW106 resin &amp; Araldite HV953U hardener. And Araldite 2011 can be ordered in a variety of package sizes: 50ml cartridges as Araldite 2859208, 200ml cartridges as Araldite 2859408, 1-Quart pail kits as Araldite 744908, and 2-gallon pail kits as Araldite 161040Please Note:  These cartridges are designed to work best with a 50ml or 200ml cartridge Dispenser, respectively.  We advise you use a 50ml or 200ml Dispenser for all respective cartridges.  If you do not have one, please check out our Dispensers, all are excellent products and have our &#x27;it&#x27;s good&#x27; seal of approval.If you prefer not to use a Dispenser, all 50ml cartridge orders we sell will come with one manual hand plunger, as pictured, that you can use for fast small jobs.  But the 200ml cartridges really need to use a 200ml Dispenser, they&#x27;re just too big to easily use without the dispenser.Key Features<ul class="md-block-unordered-list-item"><li>120 Min Working Time</li><li>Excellent General Purpose Slow-Set Epoxy for Craftsmen, DIY, and Industrial uses</li><li>High Shear and Peal Strength</li><li>Bonds to wide variety of materials</li><li>Electrically Insulating (does not conduct)</li></ul>Technical SpecsPart Numbers : 50ml Cartridges - 2859208Product Dimensions : 50ml Cartridges: 6 x 2 x 1 inchesOrigin : Made in USAItem model number : 2011Color : Near-translucent, amber tintMaterial : EpoxyItem Package Quantity : 1Number Of Piece s1Maximum Pressure : 2800 PSIMeasurement System :metricSpecial Features : Impact ReadyIncluded Components : Quick Connect Fixtures Teflon Bonding Using Araldite 2011 as the adhesive has proven successful when the proper procedures are followed. Surface Preparation: Virgin PTFE is white in color and will not readily bond unless chemically etched with etchants such as Tetra Etch. Bonding other materials to teflon will also require proper surface preparation.Adhesive Application: Araldite 2011, aka, Araldite AW106 resin and HV 953U hardener has been proved to work well. The adhesive should be applied both to both surfaces and be spread as uniformly as possible by means of a serrated spatula. Curing: Application of even, light clamping pressure while adhesive is recommended. Clean-up: Squeeze out adhesive, not cleaned prior to hardening can be accomplished using traditional machining or sanding methods.

Araldite 2011 epoxy structural adhesive is a slow set/slow cure, multipurpose, thinner, low-viscosity, room temperature setting, epoxy adhesive with high strength and toughness. This Araldite 2-hour epoxy is ideal to bond with a wide variety of materials, including most metals, ceramics, plastics, glass, rubber, stone, rock, ceramic, concrete, foams, glass, GRP, carbon fiber, fiberglass, Teflon and wood. It has a good electrical resistance and heat resistance and provides a long 2-hour working life. Once thoroughly mixed, it leaves a translucent pale yellow colored bond. 

Araldite 2011 epoxy is a two-part, multipurpose, electrically insulating, structural epoxy adhesive. It cures at temperatures ranging from 20 to 180 degrees Celsius with no release or emissions of unstable or volatile compounds. It boasts a wide variety of users, from DIY &amp; craftsman to Aerospace, Space, Aircraft, Manufacturing, and many other industrial applications.
The strength and the durability of this epoxy formula are exceptional but also practically dependent on what is being bonded together. If it's a weak or poorly-treated or poorly-prepared surface to begin with, the surface will fail before the epoxy. All grease, dirt, oil, paint, finishes, and coatings need to be removed before applying this epoxy formula. It can be applied manually using a spatula or dispensing applicator or mechanically or robotically to dry pretreated joints. For the greatest shear and peel strength, it is recommended to apply a layer of this formula of about .05 to .10 mm thick. As soon as the Araldite 2011 is applied, the joints should be immediately assembled and clamped, allowing proper cure.
Araldite 2011 is also known by its bulk resin names, Araldite AW106 resin &amp; Araldite HV953U hardener. And Araldite 2011 can be ordered in a variety of package sizes: 50ml cartridges as Araldite 2859208, 200ml cartridges as Araldite 2859408, 1-Quart pail kits as Araldite 744908, and 2-gallon pail kits as Araldite 161040
Please Note:  These cartridges are designed to work best with a 50ml or 200ml cartridge Dispenser, respectively.  We advise you use a 50ml or 200ml Dispenser for all respective cartridges.  If you do not have one, please check out our Dispensers, all are excellent products and have our 'it's good' seal of approval.
If you prefer not to use a Dispenser, all 50ml cartridge orders we sell will come with one manual hand plunger, as pictured, that you can use for fast small jobs.  But the 200ml cartridges really need to use a 200ml Dispenser, they're just too big to easily use without the dispenser.
Key Features
<ul>
<li>120 Min Working Time</li>
<li>Excellent General Purpose Slow-Set Epoxy for Craftsmen, DIY, and Industrial uses</li>
<li>High Shear and Peal Strength</li>
<li>Bonds to wide variety of materials</li>
<li>Electrically Insulating (does not conduct)</li>
</ul>
Technical Specs
Part Numbers : 50ml Cartridges - 2859208
Product Dimensions : 50ml Cartridges: 6 x 2 x 1 inches
Origin : Made in USA
Item model number : 2011
Color : Near-translucent, amber tint
Material : Epoxy
Item Package Quantity : 1
Number Of Piece s1
Maximum Pressure : 2800 PSI
Measurement System :metric
Special Features : Impact Ready
Included Components : Quick Connect Fixtures&nbsp;
Teflon Bonding Using Araldite 2011 as the adhesive has proven successful when the proper procedures are followed. 
Surface Preparation: Virgin PTFE is white in color and will not readily bond unless chemically etched with etchants such as Tetra Etch. Bonding other materials to teflon will also require proper surface preparation.
Adhesive Application: Araldite 2011, aka, Araldite AW106 resin and HV 953U hardener has been proved to work well. The adhesive should be applied both to both surfaces and be spread as uniformly as possible by means of a serrated spatula. 
Curing: Application of even, light clamping pressure while adhesive is recommended. 
Clean-up: Squeeze out adhesive, not cleaned prior to hardening can be accomplished using traditional machining or sanding methods.

Araldite 2011 2-part Slow-Setting All-Purpose Epoxy - 5oml Cartridge

araldite 2011 2-part slow-setting all-purpose epoxy 5oml cartridge bagian epoksi serbaguna pengaturan lambat kartrid adhesive glue lem perekat bahagian tetapan perlahan serba guna kartrij gam pelekat araldite/爱牢达 部分慢凝通用环氧树脂 墨盒 胶水 爱牢达