Deer

LOCTITE

Adhesive

adhesive

Adhesive Glue

adhesive-glue

Tapes

tapes

Double Sided Tapes

double-sided-tapes

Electricals

electricals

Electrical Tapes

electrical-tapes

Epoxy

epoxy

Machinery Lubricants

machinery-lubricants

Threadlocker

threadlocker

 Please note that this product is suitable for edge to edge acrylic bonding only.

Deer Brand 500, acrylic glue and adhesive is suitable for acrylic to acrylic bonding. 

The  adhesive is colourless and fast drying. Bonding can be made immediately after application and the drying and setting time is approximately 3 - 5  minutes. Once set, allow the bonded pieces rest in its a supported position for 30 - 45 minutes. Thereafter, the bonded set can be shifted and lifted up. This will create a non-removable joint. For most effective bonding, allow adhesion to cure at least 24 hours after  bonding to achieve greater strength.

1. Ensure bonding surface are cleaned, dried and free from any contaminants.

2. Ensure the bonding edges of both surface are well aligned and smooth.

3. Apply adhesive on both bonding surface using a injection kit or brush and bond immediately.

4. Initial strength achieve within short period of time. Only shift and lift of the bonded pieces after 30-45 minutes of bonding. For best adhesion effect, allow up to 24 hours of curing time.

<p class="md-block-unstyled"> </p><p class="md-block-unstyled"><strong class="md-inline-bold"> Please note that this product is suitable for edge to edge acrylic bonding only.</strong></p><p class="md-block-unstyled">Deer Brand 500, acrylic glue and adhesive is suitable for acrylic to acrylic bonding. </p><p class="md-block-unstyled">The  adhesive is colourless and fast drying. Bonding can be made immediately after application and the drying and setting time is approximately 3 - 5  minutes. Once set, allow the bonded pieces rest in its a supported position for 30 - 45 minutes. Thereafter, the bonded set can be shifted and lifted up. This will create a non-removable joint. For most effective bonding, allow adhesion to cure at least 24 hours after  bonding to achieve greater strength.</p><p class="md-block-unstyled">Application method:</p><p class="md-block-unstyled">1. Ensure bonding surface are cleaned, dried and free from any contaminants.</p><p class="md-block-unstyled">2. Ensure the bonding edges of both surface are well aligned and smooth.</p><p class="md-block-unstyled">3. Apply adhesive on both bonding surface using a injection kit or brush and bond immediately.</p><p class="md-block-unstyled">4. Initial strength achieve within short period of time. Only shift and lift of the bonded pieces after 30-45 minutes of bonding. For best adhesion effect, allow up to 24 hours of curing time.</p>

<p>&nbsp;</p>
<p><strong> Please note that this product is suitable for edge to edge acrylic bonding only.</strong></p>
<p>Deer Brand 500, acrylic glue and adhesive is suitable for acrylic to acrylic bonding.&nbsp;</p>
<p>The  adhesive is colourless and fast drying. Bonding can be made immediately after application and the drying and setting time is approximately 3 - 5  minutes. Once set, allow the bonded pieces rest in its a supported position for 30 - 45 minutes. Thereafter, the bonded set can be shifted and lifted up. This will create a non-removable joint. For most effective bonding, allow adhesion to cure at least 24 hours after  bonding to achieve greater strength.</p>
<p>Application method:</p>
<p>1. Ensure bonding surface are cleaned, dried and free from any contaminants.</p>
<p>2. Ensure the bonding edges of both surface are well aligned and smooth.</p>
<p>3. Apply adhesive on both bonding surface using a injection kit or brush and bond immediately.</p>
<p>4. Initial strength achieve within short period of time. Only shift and lift of the bonded pieces after 30-45 minutes of bonding. For best adhesion effect, allow up to 24 hours of curing time.</p>


Kevin Chiu Shi Kang

Adhesives & Glues

Acrylic Glue Adhesive (300ml) Solvent Cement - Deer Brand 500

acrylic glue adhesive (300ml) solvent cement - deer brand 500 perekat lem akrilik semen merk pelekat simen pelarut jenama rusa gam 丙烯酸胶粘剂（300ml）溶剂水泥- deer/鹿 牌500 胶水 鹿

acrylic-glue-adhesive-300ml-solvent-cement-deer-brand-500

Please note that this product is suitable for edge to edge acrylic bonding only.

*Packaging container might differ from image.

<p class="md-block-unstyled"><strong class="md-inline-bold">Please note that this product is suitable for edge to edge acrylic bonding only.</strong></p><p class="md-block-unstyled">Deer Brand 500, acrylic glue and adhesive is suitable for acrylic to acrylic bonding. </p><p class="md-block-unstyled">The  adhesive is colourless and fast drying. Bonding can be made immediately after application and the drying and setting time is approximately 3 - 5  minutes. Once set, allow the bonded pieces rest in its a supported position for 30 - 45 minutes. Thereafter, the bonded set can be shifted and lifted up. This will create a non-removable joint. For most effective bonding, allow adhesion to cure at least 24 hours after  bonding to achieve greater strength.</p><p class="md-block-unstyled">Application method:</p><p class="md-block-unstyled">1. Ensure bonding surface are cleaned, dried and free from any contaminants.</p><p class="md-block-unstyled">2. Ensure the bonding edges of both surface are well aligned and smooth.</p><p class="md-block-unstyled">3. Apply adhesive on both bonding surface using a injection kit or brush and bond immediately.</p><p class="md-block-unstyled">4. Initial strength achieve within short period of time. Only shift and lift of the bonded pieces after 30-45 minutes of bonding. For best adhesion effect, allow up to 24 hours of curing time.</p><p class="md-block-unstyled">*Packaging container might differ from image.</p><p class="md-block-unstyled"><br/></p>

<p><strong>Please note that this product is suitable for edge to edge acrylic bonding only.</strong></p>
<p>Deer Brand 500, acrylic glue and adhesive is suitable for acrylic to acrylic bonding.&nbsp;</p>
<p>The  adhesive is colourless and fast drying. Bonding can be made immediately after application and the drying and setting time is approximately 3 - 5  minutes. Once set, allow the bonded pieces rest in its a supported position for 30 - 45 minutes. Thereafter, the bonded set can be shifted and lifted up. This will create a non-removable joint. For most effective bonding, allow adhesion to cure at least 24 hours after  bonding to achieve greater strength.</p>
<p>Application method:</p>
<p>1. Ensure bonding surface are cleaned, dried and free from any contaminants.</p>
<p>2. Ensure the bonding edges of both surface are well aligned and smooth.</p>
<p>3. Apply adhesive on both bonding surface using a injection kit or brush and bond immediately.</p>
<p>4. Initial strength achieve within short period of time. Only shift and lift of the bonded pieces after 30-45 minutes of bonding. For best adhesion effect, allow up to 24 hours of curing time.</p>
<p>*Packaging container might differ from image.</p>
<p></p>


Acrylic Glue Adhesive (500ml) Solvent Cement - Deer Brand 500

acrylic glue adhesive (500ml) solvent cement - deer brand 500 merk rusa lem perekat pelekat akrilik simen pelarut jenama gam 丙烯酸胶粘剂（500ml）溶剂水泥- deer/鹿 牌500 胶水 鹿

acrylic-glue-adhesive-500ml-solvent-cement-deer-brand-500

<p class="md-block-unstyled"> </p><p class="md-block-unstyled"><strong class="md-inline-bold">Please note that this product is suitable for edge to edge acrylic bonding only.</strong></p><p class="md-block-unstyled">Deer Brand 500, acrylic glue and adhesive is suitable for acrylic to acrylic bonding. </p><p class="md-block-unstyled">The  adhesive is colourless and fast drying. Bonding can be made immediately after application and the drying and setting time is approximately 3 - 5  minutes. Once set, allow the bonded pieces rest in its a supported position for 30 - 45 minutes. Thereafter, the bonded set can be shifted and lifted up. This will create a non-removable joint. For most effective bonding, allow adhesion to cure at least 24 hours after  bonding to achieve greater strength.</p><p class="md-block-unstyled">Application method:</p><p class="md-block-unstyled">1. Ensure bonding surface are cleaned, dried and free from any contaminants.</p><p class="md-block-unstyled">2. Ensure the bonding edges of both surface are well aligned and smooth.</p><p class="md-block-unstyled">3. Apply adhesive on both bonding surface using a injection kit or brush and bond immediately.</p><p class="md-block-unstyled">4. Initial strength achieve within short period of time. Only shift and lift of the bonded pieces after 30-45 minutes of bonding. For best adhesion effect, allow up to 24 hours of curing time.</p>

<p>&nbsp;</p>
<p><strong>Please note that this product is suitable for edge to edge acrylic bonding only.</strong></p>
<p>Deer Brand 500, acrylic glue and adhesive is suitable for acrylic to acrylic bonding.&nbsp;</p>
<p>The  adhesive is colourless and fast drying. Bonding can be made immediately after application and the drying and setting time is approximately 3 - 5  minutes. Once set, allow the bonded pieces rest in its a supported position for 30 - 45 minutes. Thereafter, the bonded set can be shifted and lifted up. This will create a non-removable joint. For most effective bonding, allow adhesion to cure at least 24 hours after  bonding to achieve greater strength.</p>
<p>Application method:</p>
<p>1. Ensure bonding surface are cleaned, dried and free from any contaminants.</p>
<p>2. Ensure the bonding edges of both surface are well aligned and smooth.</p>
<p>3. Apply adhesive on both bonding surface using a injection kit or brush and bond immediately.</p>
<p>4. Initial strength achieve within short period of time. Only shift and lift of the bonded pieces after 30-45 minutes of bonding. For best adhesion effect, allow up to 24 hours of curing time.</p>


Acrylic Glue Adhesive (1L) Solvent Cement - Deer Brand 500

acrylic glue adhesive (1l) solvent cement - deer brand 500 lem perekat acvent pelarut simen rusa jenama gam pelekat 丙烯酸胶粘剂（1l）溶剂水泥- deer/鹿 牌500 胶水 鹿

acrylic-glue-adhesive-1l-solvent-cement-deer-brand-500

3M DP8005 Adhesive, ACRYLIC-2, 45ML, Off WHT/BLK 

<h3 class="md-block-header-three"><strong class="md-inline-bold">3M DP8005 Adhesive, ACRYLIC-2, 45ML, Off WHT/BLK</strong> </h3><ul class="md-block-unordered-list-item"><li><strong class="md-inline-bold">ADHESIVE, ACRYLIC-2, 45ML, OFF WHT/BLK</strong><br/> </li><li><strong class="md-inline-bold">Adhesive Type:</strong> Acrylic<br/> </li><li><strong class="md-inline-bold">Adhesive Colour:</strong> White<br/> </li><li><strong class="md-inline-bold">Cure:</strong> Room Temperature<br/> </li><li><strong class="md-inline-bold">Tensile Strength:</strong> –<br/> </li><li><strong class="md-inline-bold">Dispensing Method:</strong> Cartridge<br/> </li><li><strong class="md-inline-bold">Volume:</strong> 38ml<br/> </li><li><strong class="md-inline-bold">Weight:</strong> –<br/> </li><li><strong class="md-inline-bold">Product Range:</strong> Scotch-Weld™ Series</li></ul>

<h3><strong>3M DP8005 Adhesive, ACRYLIC-2, 45ML, Off WHT/BLK</strong>&nbsp;</h3>
<ul>
<li><strong>ADHESIVE, ACRYLIC-2, 45ML, OFF WHT/BLK</strong><br>
&nbsp;</li>
<li><strong>Adhesive Type:</strong> Acrylic<br>
&nbsp;</li>
<li><strong>Adhesive Colour:</strong> White<br>
&nbsp;</li>
<li><strong>Cure:</strong> Room Temperature<br>
&nbsp;</li>
<li><strong>Tensile Strength:</strong> –<br>
&nbsp;</li>
<li><strong>Dispensing Method:</strong> Cartridge<br>
&nbsp;</li>
<li><strong>Volume:</strong> 38ml<br>
&nbsp;</li>
<li><strong>Weight:</strong> –<br>
&nbsp;</li>
<li><strong>Product Range:</strong> Scotch-Weld™ Series</li>
</ul>


Technical Data Sheet (141.47KB) EN

Safety Data Sheet (385.57KB) EN

MULTICOMP PRO

Analog Devices

MULTICOMP

WIHA

Pro Power

Duratool

Tenma

Hakko

TR Fastenings

Surface Mount Resistors

Multilayer Ceramic Capacitors

DC-DC Converters

Through Hole Resistors

Operational Amplifiers

Analogue to Digital Converters

Transceiver

Digital to Analogue Converters

Development Boards

Junction & Enclosure Box

Element14

buyerIntroduction

3M DP8005 Adhesive, ACRYLIC-2, 45ML, Off WHT/BLK

3m dp8005 adhesive, acrylic-2, 45ml, wht/blk perekat dp8005, akrilik-2, putih/hitam epoxy epoksi pelekat mati 粘合剂，acrylic-2，45ml，白色/黑色 环氧胶

3m-dp8005-adhesive-acrylic-2-45ml-off-wht-blk

Certification of Quality (COQ) upon request

LOCTITE 382 Acrylic Instant Adhesive Ultra Clear 20g

LOCTITE 382 is a transparent, colourless, general purpose, ethyl-based instant adhesive gel with a fixture time of 20 - 40 secs. It is suitable for rubbers and metals and also suitable for plastics and polyolefin with Primer LOCTITE SF 770 or LOCTITE SF 7239.

Suitable for plastics and polyolefin with Primer LOCTITE 770 or LOCTITE 7239

Shear Strength, Grit Blasted Steel: 3200 psi

<h3 class="md-block-header-three"><strong class="md-inline-bold"><u class="md-inline-underline">Henkel Authorized Distributor</u></strong></h3><p class="md-block-unstyled">Certification of Quality (COQ) upon request</p><h3 class="md-block-header-three">LOCTITE 382 Acrylic Instant Adhesive Ultra Clear 20g</h3><p class="md-block-unstyled">LOCTITE 382 is a transparent, colourless, general purpose, ethyl-based instant adhesive gel with a fixture time of 20 - 40 secs. It is suitable for rubbers and metals and also suitable for plastics and polyolefin with Primer LOCTITE SF 770 or LOCTITE SF 7239.</p><h3 class="md-block-header-three">Features:</h3><ul class="md-block-unordered-list-item"><li>General purpose gel</li><li>Suitable for rubbers and metals</li><li>Suitable for plastics and polyolefin with Primer LOCTITE 770 or LOCTITE 7239</li><li>Fixture time 20 - 40 secs.</li></ul><h3 class="md-block-header-three">Specification:</h3><ul class="md-block-unordered-list-item"><li>Brand: LOCTITE</li><li>Product Type: Instant Adhesive</li><li>Colour: Clear</li><li>Fixture Time: 20-40 sec</li><li>Full Cure Temperature: 77°F</li><li>Gap Fill: 0.006 inch</li><li>Shear Strength, Grit Blasted Steel: 3200 psi</li><li>Specific Gravity: 1.05 gal/L</li><li>Specific Gravity Temperature: 25°C</li><li>Technology: Ethyl</li><li>Viscosity: 5000 mPa.s (cP) Brookfield</li><li>Viscosity Temperature: 77°F</li><li>Weight: 20 g</li></ul>

<h3><strong><ins>Henkel Authorized Distributor</ins></strong></h3>
<p>Certification of Quality (COQ) upon request</p>
<h3>LOCTITE 382 Acrylic Instant Adhesive Ultra Clear 20g</h3>
<p>LOCTITE 382 is a transparent, colourless, general purpose, ethyl-based instant adhesive gel with a fixture time of 20 - 40 secs. It is suitable for rubbers and metals and also suitable for plastics and polyolefin with Primer LOCTITE SF 770 or LOCTITE SF 7239.</p>
<h3>Features:</h3>
<ul>
<li>General purpose gel</li>
<li>Suitable for rubbers and metals</li>
<li>Suitable for plastics and polyolefin with Primer LOCTITE 770 or LOCTITE 7239</li>
<li>Fixture time 20 - 40 secs.</li>
</ul>
<h3>Specification:</h3>
<ul>
<li>Brand: LOCTITE</li>
<li>Product Type: Instant Adhesive</li>
<li>Colour: Clear</li>
<li>Fixture Time: 20-40 sec</li>
<li>Full Cure Temperature: 77°F</li>
<li>Gap Fill: 0.006 inch</li>
<li>Shear Strength, Grit Blasted Steel: 3200 psi</li>
<li>Specific Gravity: 1.05 gal/L</li>
<li>Specific Gravity Temperature: 25°C</li>
<li>Technology: Ethyl</li>
<li>Viscosity: 5000 mPa.s (cP) Brookfield</li>
<li>Viscosity Temperature: 77°F</li>
<li>Weight: 20 g</li>
</ul>


Data Sheet

Ian Ong

ELORA

WEICON

METABO

Permatex

Others

Fujiplus

DEVCON

Molykote

Sealants

Lubricants

Degreasers

Anti Rust Coating & Lubricant

Socket Accessories

Grease

Other Tools

Sharon/Joey

Loctite 382 Acrylic Instant Adhesive Ultra Clear 20g Henkel Authorized Distributor

loctite 382 acrylic instant adhesive ultra clear 20g henkel authorized distributor perekat instan akrilik resmi glue lem gam pelekat loctite/乐泰 382丙烯酸速干胶20g汉高授权分销商 胶水 乐泰

loctite-382-acrylic-instant-adhesive-ultra-clear-20g-henkel-authorized-distributor

Clear Thin Double Sided Strong Adhesive Acrylic Tape for Mobile Phone Laptop Tablets LCD Screen etc.

* Color: Transparent, Clear, under the red cover is clear and transparent.

* Temperature Resistant, operating temperature: -25~150C

Short-term heat resistance: 150 degrees Celsius

Long-term heat resistance: 100 degrees Celsius

* Clear double sided acrylic tape, strong sticky

* Widely used for Laptop, cellphone screen repair, LCD panel display, tablets, lens, battery,  

camera, billboard, signpost, poster, 3d card making, home, office, workshop etc.

1. Delivery can be expedited with additional freight cost

2. Stock availability/ Actual order lead time will be rechecked once confirm order

3. We do not accept returns or exchanges due to Indent item unless product quality issue

4. Picture shown is for illustration only, actual product may differ

5. This image is representative of the product range, actual product may differ

6. Product may vary slightly from image representation

7. Please allow 1-3mm error due to manual measurement

<p class="md-block-unstyled">Clear Thin Double Sided Strong Adhesive Acrylic Tape for Mobile Phone Laptop Tablets LCD Screen etc.</p><p class="md-block-unstyled">* Material: PET</p><p class="md-block-unstyled">* Color: Transparent, Clear, under the red cover is clear and transparent.</p><p class="md-block-unstyled">* Type Adhesive: Acrylic Adhesive</p><p class="md-block-unstyled">* Adhesiveness: ≥1.5kg/in</p><p class="md-block-unstyled">* Permanent Adhesion: ≥48/hour</p><p class="md-block-unstyled">* Temperature Resistant, operating temperature: -25~150C</p><p class="md-block-unstyled">Short-term heat resistance: 150 degrees Celsius</p><p class="md-block-unstyled">Long-term heat resistance: 100 degrees Celsius</p><p class="md-block-unstyled">* Corrosion Resistance.</p><p class="md-block-unstyled">* Clear double sided acrylic tape, strong sticky</p><p class="md-block-unstyled">* Widely used for Laptop, cellphone screen repair, LCD panel display, tablets, lens, battery,  </p><p class="md-block-unstyled">camera, billboard, signpost, poster, 3d card making, home, office, workshop etc.</p><p class="md-block-unstyled">* Width: 3mm, 5mm, 8mm, </p><p class="md-block-unstyled">* Length: 5M</p><p class="md-block-unstyled">* Thickness: 0.2mm </p><p class="md-block-unstyled">Note: </p><p class="md-block-unstyled">1. Delivery can be expedited with additional freight cost</p><p class="md-block-unstyled">2. Stock availability/ Actual order lead time will be rechecked once confirm order</p><p class="md-block-unstyled">3. We do not accept returns or exchanges due to Indent item unless product quality issue</p><p class="md-block-unstyled">4. Picture shown is for illustration only, actual product may differ</p><p class="md-block-unstyled">5. This image is representative of the product range, actual product may differ</p><p class="md-block-unstyled">6. Product may vary slightly from image representation</p><p class="md-block-unstyled">7. Please allow 1-3mm error due to manual measurement</p>

<p>Clear Thin Double Sided Strong Adhesive Acrylic Tape for Mobile Phone Laptop Tablets LCD Screen etc.</p>
<p>* Material: PET</p>
<p>* Color: Transparent, Clear, under the red cover is clear and transparent.</p>
<p>* Type Adhesive: Acrylic Adhesive</p>
<p>* Adhesiveness: ≥1.5kg/in</p>
<p>* Permanent Adhesion: ≥48/hour</p>
<p>* Temperature Resistant, operating temperature: -25~150C</p>
<p>Short-term heat resistance: 150 degrees Celsius</p>
<p>Long-term heat resistance: 100 degrees Celsius</p>
<p>* Corrosion Resistance.</p>
<p>* Clear double sided acrylic tape, strong sticky</p>
<p>* Widely used for Laptop, cellphone screen repair, LCD panel display, tablets, lens, battery,&nbsp;&nbsp;</p>
<p>camera, billboard, signpost, poster, 3d card making, home, office, workshop etc.</p>
<p>* Width: 3mm, 5mm, 8mm,&nbsp;</p>
<p>* Length: 5M</p>
<p>* Thickness: 0.2mm&nbsp;</p>
<p>Note:&nbsp;</p>
<p>1. Delivery can be expedited with additional freight cost</p>
<p>2. Stock availability/ Actual order lead time will be rechecked once confirm order</p>
<p>3. We do not accept returns or exchanges due to Indent item unless product quality issue</p>
<p>4. Picture shown is for illustration only, actual product may differ</p>
<p>5. This image is representative of the product range, actual product may differ</p>
<p>6. Product may vary slightly from image representation</p>
<p>7. Please allow 1-3mm error due to manual measurement</p>


Prolockey

NANHUA

Eezee Pro

Iflytek

Nitto

Remax

SAIRUI

Guo Mao

Padlocks & Lockout Devices

Padlocks & Lockout Station

Toolbags

Lockout Tags

Safe Box & Safe Chest

Safety Cone

Cable Protectors

Pedal Bins

Desk stationery

 Samuel Wang

Clear Thin Double Sided Strong Adhesive Acrylic Tape for Mobile Phone Laptop Tablets Lcd Screen Etc. (5M Length)

clear thin double sided strong adhesive acrylic tape mobile phone laptop tablets lcd screen etc. (5m length) pita akrilik perekat kuat dua sisi tipis bening untuk ponsel tablet layar dll. (panjang 5m) tapes oem pelekat nipis yang jelas komputer riba telefon mudah alih skrin dll 透明薄双面强力粘合丙烯酸胶带，适用于手机、笔记本电脑、平板电脑、液晶屏等（5 米长） oem代工

clear-thin-double-sided-strong-adhesive-acrylic-tape-for-mobile-phone-laptop-tablets-lcd-screen-etc-5m-length

Width

LOCTITE 278 Acrylic Anaerobic Threadlocker Green 50ml

LOCTITE 278 is a green, high strength, medium viscosity, methacrylate-based threadlocking adhesive. It has a fixture time on steel of 20 min, brass 20 min and stainless steel 60 min. Can tolerate slight contaminations of industrial oils. High temperature resistance.

Prevents unwanted movement, loosening, leaks and corrosion

Threadlocking Viscosity/Strength: Medium/High

Viscosity: 2400-3600 mPa.s (cP) Brookfield

<h3 class="md-block-header-three"><strong class="md-inline-bold"><u class="md-inline-underline">Henkel Authorized Distributor</u></strong></h3><p class="md-block-unstyled">Certification of Quality (COQ) upon request</p><h3 class="md-block-header-three">LOCTITE 278 Acrylic Anaerobic Threadlocker Green 50ml</h3><p class="md-block-unstyled">LOCTITE 278 is a green, high strength, medium viscosity, methacrylate-based threadlocking adhesive. It has a fixture time on steel of 20 min, brass 20 min and stainless steel 60 min. Can tolerate slight contaminations of industrial oils. High temperature resistance.</p><h3 class="md-block-header-three">Features:</h3><ul class="md-block-unordered-list-item"><li>Resists vibration</li><li>High temperature resistance</li><li>Breakaway torque on M10 bolts of 32 Nm</li><li>Prevents unwanted movement, loosening, leaks and corrosion</li></ul><h3 class="md-block-header-three">Specification:</h3><ul class="md-block-unordered-list-item"><li>Brand: LOCTITE</li><li>Product Type: Threadlocker</li><li>Colour: Green</li><li>Chemical Basis/Base: Methacrylate</li><li>Fixture Time: 20-60 min</li><li>Physical Form: Liquid</li><li>Chemical Type: Acrylic</li><li>Cure Type: Anaerobic Cure</li><li>Cure Time: 72 hr</li><li>Chemical Type: Dimethacrylate Ester</li><li>Components: 1 part</li><li>Flash Point: &gt;93.3 °C</li><li>Shear Strength: &gt;= 780 @ 22 °C</li><li>Specific Gravity: 1.08 @ 25 °C</li><li>Threadlocking Viscosity/Strength: Medium/High</li><li>Viscosity: 2400-3600 mPa.s (cP) Brookfield</li><li>Weight: 50 ml</li></ul>

<h3><strong><ins>Henkel Authorized Distributor</ins></strong></h3>
<p>Certification of Quality (COQ) upon request</p>
<h3>LOCTITE 278 Acrylic Anaerobic Threadlocker Green 50ml</h3>
<p>LOCTITE 278 is a green, high strength, medium viscosity, methacrylate-based threadlocking adhesive. It has a fixture time on steel of 20 min, brass 20 min and stainless steel 60 min. Can tolerate slight contaminations of industrial oils. High temperature resistance.</p>
<h3>Features:</h3>
<ul>
<li>Resists vibration</li>
<li>High temperature resistance</li>
<li>Breakaway torque on M10 bolts of 32 Nm</li>
<li>Prevents unwanted movement, loosening, leaks and corrosion</li>
</ul>
<h3>Specification:</h3>
<ul>
<li>Brand: LOCTITE</li>
<li>Product Type: Threadlocker</li>
<li>Colour: Green</li>
<li>Chemical Basis/Base: Methacrylate</li>
<li>Fixture Time: 20-60 min</li>
<li>Physical Form: Liquid</li>
<li>Chemical Type: Acrylic</li>
<li>Cure Type: Anaerobic Cure</li>
<li>Cure Time: 72 hr</li>
<li>Chemical Type: Dimethacrylate Ester</li>
<li>Components: 1 part</li>
<li>Flash Point: &gt;93.3 °C</li>
<li>Shear Strength: &gt;= 780 @ 22 °C</li>
<li>Specific Gravity: 1.08 @ 25 °C</li>
<li>Threadlocking Viscosity/Strength: Medium/High</li>
<li>Viscosity: 2400-3600 mPa.s (cP) Brookfield</li>
<li>Weight: 50 ml</li>
</ul>


Loctite 278 Acrylic Anaerobic Threadlocker Green 50ml Henkel Authorized Distributor

loctite 278 acrylic anaerobic threadlocker green 50ml henkel authorized distributor akrilik anaerobik hijau resmi pengunci benang pengedar sah loctite/乐泰 278丙烯酸厌氧线程锁绿色50毫升汉高授权分销商 螺纹锁 乐泰

loctite-278-acrylic-anaerobic-threadlocker-green-50ml-henkel-authorized-distributor

LOCTITE 272 Acrylic Anaerobic Threadlocker Red 50ml

LOCTITE 272 is a red, medium viscosity, methacrylate-based threadlocking adhesive with high strength. With a fixture time on steel of 10 min, brass 5 min and stainless steel 15 min, it is ideal for applications where any migration of the adhesive must be prevented. Can tolerate slight contaminations of industrial oils. Suitable for all metal fasteners. It has a breakaway torque on M10 bolts of 23 Nm. Red, high strength, medium viscosity, methacrylate-based threadlocking adhesive with high temperature resistance.

Seals threads - allows through-hole tapping

Threadlocking Strength: High Strength, Medium Strength

Viscosity: Thixotropic/4000-15000 mPa.s (cP) Brookfield

<h3 class="md-block-header-three"><strong class="md-inline-bold"><u class="md-inline-underline">Henkel Authorized Distributor</u></strong></h3><p class="md-block-unstyled">Certification of Quality (COQ) upon request</p><h3 class="md-block-header-three">LOCTITE 272 Acrylic Anaerobic Threadlocker Red 50ml</h3><p class="md-block-unstyled">LOCTITE 272 is a red, medium viscosity, methacrylate-based threadlocking adhesive with high strength. With a fixture time on steel of 10 min, brass 5 min and stainless steel 15 min, it is ideal for applications where any migration of the adhesive must be prevented. Can tolerate slight contaminations of industrial oils. Suitable for all metal fasteners. It has a breakaway torque on M10 bolts of 23 Nm. Red, high strength, medium viscosity, methacrylate-based threadlocking adhesive with high temperature resistance.</p><h3 class="md-block-header-three">Features:</h3><ul class="md-block-unordered-list-item"><li>High strength</li><li>Medium viscosity</li><li>Resists vibration</li><li>High temperature resistant</li><li>Seals threads - allows through-hole tapping</li></ul><h3 class="md-block-header-three">Specification:</h3><ul class="md-block-unordered-list-item"><li>Brand: LOCTITE</li><li>Product Type: Threadlocker</li><li>Colour: Red</li><li>Physical Form: Liquid</li><li>Chemical Basis/Base: Methacrylate</li><li>Fixture Time: 40 min</li><li>Chemical Type: Acrylic</li><li>Components: 1 part</li><li>Cure Type: Anaerobic Cure</li><li>Odour: Mild</li><li>Threadlocking Strength: High Strength, Medium Strength</li><li>Flash Point: &gt;93.3°C</li><li>Cure Time: 24 hr</li><li>Specific Gravity: 1.1 @ 25°C</li><li>Maximum Operating Temperature: +450°F</li><li>Minimum Operating Temperature: -65°F</li><li>Viscosity: Thixotropic/4000-15000 mPa.s (cP) Brookfield</li><li>Shear Strength: &gt;= 2,102 @ 22°C</li><li>Weight: 50 ml</li></ul>

<h3><strong><ins>Henkel Authorized Distributor</ins></strong></h3>
<p>Certification of Quality (COQ) upon request</p>
<h3>LOCTITE 272 Acrylic Anaerobic Threadlocker Red 50ml</h3>
<p>LOCTITE 272 is a red, medium viscosity, methacrylate-based threadlocking adhesive with high strength. With a fixture time on steel of 10 min, brass 5 min and stainless steel 15 min, it is ideal for applications where any migration of the adhesive must be prevented. Can tolerate slight contaminations of industrial oils. Suitable for all metal fasteners. It has a breakaway torque on M10 bolts of 23 Nm. Red, high strength, medium viscosity, methacrylate-based threadlocking adhesive with high temperature resistance.</p>
<h3>Features:</h3>
<ul>
<li>High strength</li>
<li>Medium viscosity</li>
<li>Resists vibration</li>
<li>High temperature resistant</li>
<li>Seals threads - allows through-hole tapping</li>
</ul>
<h3>Specification:</h3>
<ul>
<li>Brand: LOCTITE</li>
<li>Product Type: Threadlocker</li>
<li>Colour: Red</li>
<li>Physical Form: Liquid</li>
<li>Chemical Basis/Base: Methacrylate</li>
<li>Fixture Time: 40 min</li>
<li>Chemical Type: Acrylic</li>
<li>Components: 1 part</li>
<li>Cure Type: Anaerobic Cure</li>
<li>Odour: Mild</li>
<li>Threadlocking Strength: High Strength, Medium Strength</li>
<li>Flash Point: &gt;93.3°C</li>
<li>Cure Time: 24 hr</li>
<li>Specific Gravity: 1.1 @ 25°C</li>
<li>Maximum Operating Temperature: +450°F</li>
<li>Minimum Operating Temperature: -65°F</li>
<li>Viscosity: Thixotropic/4000-15000 mPa.s (cP) Brookfield</li>
<li>Shear Strength: &gt;= 2,102 @ 22°C</li>
<li>Weight: 50 ml</li>
</ul>


Data Sheet_1

Loctite 272 Acrylic Anaerobic Threadlocker Red 50ml Henkel Authorized Distributor

loctite 272 acrylic anaerobic threadlocker red 50ml henkel authorized distributor akrilik anaerobik merah resmi pengunci benang pengedar sah loctite/乐泰 272丙烯酸厌氧线程锁红50毫升汉高授权分销商 螺纹锁 乐泰

loctite-272-acrylic-anaerobic-threadlocker-red-50ml-henkel-authorized-distributor

LOCTITE 290 Acrylic Anaerobic Threadlocker Green 50ml

LOCTITE 290 is a liquid medium/high-strength threadlocker designed for the locking and sealing of threaded fasteners. Because of its low viscosity and capillary action, the product wicks between engaged threads and eliminates the need for disassembly prior to application. The product cures when confined in the absence of air between close-fitting metal surfaces and prevents loosening and leakage due to shock and vibration. The product can also fill porosities in welds, castings and powdered metal parts.

Ideal for locking preassembled fasteners, e.g. instrumentation fasteners, electrical connectors and set screws

Proven to be tolerant of minor contamination due to industrial oils, e.g. motor oils, corrosion prevention oils and cutting fluids

Threadlocking Viscosity/Strength: Low/Medium to High

<h3 class="md-block-header-three"><strong class="md-inline-bold"><u class="md-inline-underline">Henkel Authorized Distributor</u></strong></h3><p class="md-block-unstyled">Certification of Quality (COQ) upon request</p><h3 class="md-block-header-three">LOCTITE 290 Acrylic Anaerobic Threadlocker Green 50ml</h3><p class="md-block-unstyled">LOCTITE 290 is a liquid medium/high-strength threadlocker designed for the locking and sealing of threaded fasteners. Because of its low viscosity and capillary action, the product wicks between engaged threads and eliminates the need for disassembly prior to application. The product cures when confined in the absence of air between close-fitting metal surfaces and prevents loosening and leakage due to shock and vibration. The product can also fill porosities in welds, castings and powdered metal parts.</p><h3 class="md-block-header-three">Features:</h3><ul class="md-block-unordered-list-item"><li>Requires heat for disassembly</li><li>Works on metal only</li><li>Ideal for locking preassembled fasteners, e.g. instrumentation fasteners, electrical connectors and set screws</li><li>Proven to be tolerant of minor contamination due to industrial oils, e.g. motor oils, corrosion prevention oils and cutting fluids</li></ul><h3 class="md-block-header-three">Specification:</h3><ul class="md-block-unordered-list-item"><li>Brand: LOCTITE</li><li>Product Type: Threadlocker</li><li>Colour: Green</li><li>Chemical Basis/Base: Methacrylate</li><li>Fixture Time: 20-60 min</li><li>Physical Form: Liquid</li><li>Chemical Type: Acrylic</li><li>Cure Type: Anaerobic Cure</li><li>Cure Time: 72 hr</li><li>Chemical Type: Dimethacrylate Ester</li><li>Components: 1 part</li><li>Flash Point: &gt;93.3 °C</li><li>Shear Strength: &gt;= 780 @ 22 °C</li><li>Specific Gravity: 1.08 @ 25 °C</li><li>Threadlocking Viscosity/Strength: Low/Medium to High</li><li>Weight: 50 ml</li></ul>

<h3><strong><ins>Henkel Authorized Distributor</ins></strong></h3>
<p>Certification of Quality (COQ) upon request</p>
<h3>LOCTITE 290 Acrylic Anaerobic Threadlocker Green 50ml</h3>
<p>LOCTITE 290 is a liquid medium/high-strength threadlocker designed for the locking and sealing of threaded fasteners. Because of its low viscosity and capillary action, the product wicks between engaged threads and eliminates the need for disassembly prior to application. The product cures when confined in the absence of air between close-fitting metal surfaces and prevents loosening and leakage due to shock and vibration. The product can also fill porosities in welds, castings and powdered metal parts.</p>
<h3>Features:</h3>
<ul>
<li>Requires heat for disassembly</li>
<li>Works on metal only</li>
<li>Ideal for locking preassembled fasteners, e.g. instrumentation fasteners, electrical connectors and set screws</li>
<li>Proven to be tolerant of minor contamination due to industrial oils, e.g. motor oils, corrosion prevention oils and cutting fluids</li>
</ul>
<h3>Specification:</h3>
<ul>
<li>Brand: LOCTITE</li>
<li>Product Type: Threadlocker</li>
<li>Colour: Green</li>
<li>Chemical Basis/Base: Methacrylate</li>
<li>Fixture Time: 20-60 min</li>
<li>Physical Form: Liquid</li>
<li>Chemical Type: Acrylic</li>
<li>Cure Type: Anaerobic Cure</li>
<li>Cure Time: 72 hr</li>
<li>Chemical Type: Dimethacrylate Ester</li>
<li>Components: 1 part</li>
<li>Flash Point: &gt;93.3 °C</li>
<li>Shear Strength: &gt;= 780 @ 22 °C</li>
<li>Specific Gravity: 1.08 @ 25 °C</li>
<li>Threadlocking Viscosity/Strength: Low/Medium to High</li>
<li>Weight: 50 ml</li>
</ul>


Loctite 290 Acrylic Anaerobic Threadlocker Green 50ml Henkel Authorized Distributor

loctite 290 acrylic anaerobic threadlocker green 50ml henkel authorized distributor akrilik anaerobik hijau resmi pengunci benang pengedar sah loctite/乐泰 290丙烯酸厌氧线程锁绿色50毫升汉高授权分销商 螺纹锁 乐泰

loctite-290-acrylic-anaerobic-threadlocker-green-50ml-henkel-authorized-distributor

LOCTITE 277 Acrylic Anaerobic Threadlocker Red 50ml

LOCTITE 277 is a red, high strength, high viscosity, methacrylate-based threadlocking adhesive. It has a fixture time on steel of 30 min, brass 25 min and stainless steel 270 min making it deal for applications where migration of the adhesive must be prevented. Can tolerate slight contaminations of industrial oils. Suited to large threads. Fluoresces to allow monitoring.

Viscosity: 6000-8000 mPa.s (cP) Brookfield

<h3 class="md-block-header-three"><strong class="md-inline-bold"><u class="md-inline-underline">Henkel Authorized Distributor</u></strong></h3><p class="md-block-unstyled">Certification of Quality (COQ) upon request</p><h3 class="md-block-header-three">LOCTITE 277 Acrylic Anaerobic Threadlocker Red 50ml</h3><p class="md-block-unstyled">LOCTITE 277 is a red, high strength, high viscosity, methacrylate-based threadlocking adhesive. It has a fixture time on steel of 30 min, brass 25 min and stainless steel 270 min making it deal for applications where migration of the adhesive must be prevented. Can tolerate slight contaminations of industrial oils. Suited to large threads. Fluoresces to allow monitoring.</p><h3 class="md-block-header-three">Features:</h3><ul class="md-block-unordered-list-item"><li>Resists vibration</li><li>Suited to large threads</li><li>Breakaway torque on M10 bolts of 32 Nm</li><li>Prevents unwanted movement, loosening, leaks and corrosion</li></ul><h3 class="md-block-header-three">Specification:</h3><ul class="md-block-unordered-list-item"><li>Brand: LOCTITE</li><li>Product Type: Threadlocker</li><li>Colour: Red</li><li>Chemical Basis/Base: Methacrylate</li><li>Fixture Time: 25-270 min</li><li>Physical Form: Liquid</li><li>Chemical Type: Acrylic</li><li>Cure Type: Anaerobic Cure</li><li>Cure Time: 72 hr</li><li>Chemical Type: Dimethacrylate Ester</li><li>Components: 1 part</li><li>Flash Point: &gt;93.3 °C</li><li>Shear Strength: &gt;= 1,300 @ 22 °C</li><li>Fluorescence: Positive under UV light</li><li>Threadlocking Viscosity/Strength: Medium/High</li><li>Viscosity: 6000-8000 mPa.s (cP) Brookfield</li><li>Weight: 50 ml</li></ul>

<h3><strong><ins>Henkel Authorized Distributor</ins></strong></h3>
<p>Certification of Quality (COQ) upon request</p>
<h3>LOCTITE 277 Acrylic Anaerobic Threadlocker Red 50ml</h3>
<p>LOCTITE 277 is a red, high strength, high viscosity, methacrylate-based threadlocking adhesive. It has a fixture time on steel of 30 min, brass 25 min and stainless steel 270 min making it deal for applications where migration of the adhesive must be prevented. Can tolerate slight contaminations of industrial oils. Suited to large threads. Fluoresces to allow monitoring.</p>
<h3>Features:</h3>
<ul>
<li>Resists vibration</li>
<li>Suited to large threads</li>
<li>Breakaway torque on M10 bolts of 32 Nm</li>
<li>Prevents unwanted movement, loosening, leaks and corrosion</li>
</ul>
<h3>Specification:</h3>
<ul>
<li>Brand: LOCTITE</li>
<li>Product Type: Threadlocker</li>
<li>Colour: Red</li>
<li>Chemical Basis/Base: Methacrylate</li>
<li>Fixture Time: 25-270 min</li>
<li>Physical Form: Liquid</li>
<li>Chemical Type: Acrylic</li>
<li>Cure Type: Anaerobic Cure</li>
<li>Cure Time: 72 hr</li>
<li>Chemical Type: Dimethacrylate Ester</li>
<li>Components: 1 part</li>
<li>Flash Point: &gt;93.3 °C</li>
<li>Shear Strength: &gt;= 1,300 @ 22 °C</li>
<li>Fluorescence: Positive under UV light</li>
<li>Threadlocking Viscosity/Strength: Medium/High</li>
<li>Viscosity: 6000-8000 mPa.s (cP) Brookfield</li>
<li>Weight: 50 ml</li>
</ul>


Loctite 277 Acrylic Anaerobic Threadlocker Red 50ml Henkel Authorized Distributor

loctite 277 acrylic anaerobic threadlocker red 50ml henkel authorized distributor akrilik anaerobik merah resmi pengunci benang loctite/乐泰 277丙烯酸厌氧线程锁红50毫升汉高授权分销商 螺纹锁 乐泰

loctite-277-acrylic-anaerobic-threadlocker-red-50ml-henkel-authorized-distributor

LOCTITE 274 Acrylic Anaerobic Threadlocker Blue 50ml

LOCTITE 274 is a blue, liquid, 1-part, low viscosity dimethacrylate ester, acrylic threadlocker with medium strength. It is designed for the locking and sealing of threaded fasteners which require normal disassembly with standard hand tools. The product cures when confined in the absence of air between close fitting metal surfaces and prevents loosening and leakage from shock and vibration.

Threadlocking Viscosity/Strength: Low/Medium

Chemical Basis/Base: Dimethacrylate Ester

Viscosity (#7sp/20/rpm): 125 mPa.s (cP) Brookfield

<h3 class="md-block-header-three"><strong class="md-inline-bold"><u class="md-inline-underline">Henkel Authorized Distributor</u></strong></h3><p class="md-block-unstyled">Certification of Quality (COQ) upon request</p><h3 class="md-block-header-three">LOCTITE 274 Acrylic Anaerobic Threadlocker Blue 50ml</h3><p class="md-block-unstyled">LOCTITE 274 is a blue, liquid, 1-part, low viscosity dimethacrylate ester, acrylic threadlocker with medium strength. It is designed for the locking and sealing of threaded fasteners which require normal disassembly with standard hand tools. The product cures when confined in the absence of air between close fitting metal surfaces and prevents loosening and leakage from shock and vibration.</p><h3 class="md-block-header-three">Features:</h3><ul class="md-block-unordered-list-item"><li>Medium strength</li><li>One component - no mixing</li><li>Positive under UV light</li><li>Disassembly with standard tools</li></ul><h3 class="md-block-header-three">Specification:</h3><ul class="md-block-unordered-list-item"><li>Brand: LOCTITE</li><li>Product Type: Threadlocker</li><li>Colour: Blue</li><li>Physical Form: Liquid</li><li>Chemical Type: Acrylic</li><li>Cure Type: Anaerobic Cure</li><li>Fluorescence: Positive under UV light</li><li>Threadlocking Viscosity/Strength: Low/Medium</li><li>Chemical Basis/Base: Dimethacrylate Ester</li><li>Fixture Time: 30 min</li><li>Fixture Time Temperature: 30°C</li><li>Viscosity (#7sp/20/rpm): 125 mPa.s (cP) Brookfield</li><li>Weight: 50 ml</li></ul>

<h3><strong><ins>Henkel Authorized Distributor</ins></strong></h3>
<p>Certification of Quality (COQ) upon request</p>
<h3>LOCTITE 274 Acrylic Anaerobic Threadlocker Blue 50ml</h3>
<p>LOCTITE 274 is a blue, liquid, 1-part, low viscosity dimethacrylate ester, acrylic threadlocker with medium strength. It is designed for the locking and sealing of threaded fasteners which require normal disassembly with standard hand tools. The product cures when confined in the absence of air between close fitting metal surfaces and prevents loosening and leakage from shock and vibration.</p>
<h3>Features:</h3>
<ul>
<li>Medium strength</li>
<li>One component - no mixing</li>
<li>Positive under UV light</li>
<li>Disassembly with standard tools</li>
</ul>
<h3>Specification:</h3>
<ul>
<li>Brand: LOCTITE</li>
<li>Product Type: Threadlocker</li>
<li>Colour: Blue</li>
<li>Physical Form: Liquid</li>
<li>Chemical Type: Acrylic</li>
<li>Cure Type: Anaerobic Cure</li>
<li>Fluorescence: Positive under UV light</li>
<li>Threadlocking Viscosity/Strength: Low/Medium</li>
<li>Chemical Basis/Base: Dimethacrylate Ester</li>
<li>Fixture Time: 30 min</li>
<li>Fixture Time Temperature: 30°C</li>
<li>Viscosity (#7sp/20/rpm): 125 mPa.s (cP) Brookfield</li>
<li>Weight: 50 ml</li>
</ul>


Loctite 274 Acrylic Anaerobic Threadlocker Blue 50ml Loctite Authorized Distributor

loctite 274 acrylic anaerobic threadlocker blue 50ml authorized distributor akrilik anaerobik biru resmi pengunci benang pengedar sah loctite/乐泰 274丙烯酸厌氧threadlocker蓝色50毫升乐泰授权分销商 螺纹锁 乐泰

loctite-274-acrylic-anaerobic-threadlocker-blue-50ml-loctite-authorized-distributor

LOCTITE 271 Acrylic Anaerobic Threadlocker Red 50ml

Loctite Threadlocker Red 271 is designed for the permanent locking and sealing of threaded fasteners. LOCTITE is a red, low viscosity, methacrylate-based threadlocking adhesive with high strength. With steel fixture time of 10 min, brass 5 min and stainless steel 15 min. Can tolerate slight contaminations of industrial oils. Suitable for all metal fasteners. Breakaway torque on M10 bolts of 26 Nm. Fluoresces under UV light. High strength, low viscosity, red, methacrylate-based threadlocking adhesive which fluoresces under UV light to allow monitoring.

Fluoresces to allow quality control and inspection

The product cures when confined in the absence of air between close fitting metal surfaces

It protects threads from rust and corrosion and prevents loosening from shock and vibration

It is only removable once cured by heating up parts to 500°F (260°C)

Threadlocking Strength: High Strength, Low Strength

<h3 class="md-block-header-three"><strong class="md-inline-bold"><u class="md-inline-underline">Henkel Authorized Distributor</u></strong></h3><p class="md-block-unstyled">Certification of Quality (COQ) upon request</p><h3 class="md-block-header-three">LOCTITE 271 Acrylic Anaerobic Threadlocker Red 50ml</h3><p class="md-block-unstyled">Loctite Threadlocker Red 271 is designed for the permanent locking and sealing of threaded fasteners. LOCTITE is a red, low viscosity, methacrylate-based threadlocking adhesive with high strength. With steel fixture time of 10 min, brass 5 min and stainless steel 15 min. Can tolerate slight contaminations of industrial oils. Suitable for all metal fasteners. Breakaway torque on M10 bolts of 26 Nm. Fluoresces under UV light. High strength, low viscosity, red, methacrylate-based threadlocking adhesive which fluoresces under UV light to allow monitoring.</p><h3 class="md-block-header-three">Features:</h3><ul class="md-block-unordered-list-item"><li>Low viscosity</li><li>Resists vibration</li><li>High strength</li><li>Seals threads - allows through-hole tapping</li><li>Fluoresces to allow quality control and inspection</li><li>Prevents unwanted movement, loosening, leaks and corrosion</li><li>The product cures when confined in the absence of air between close fitting metal surfaces</li><li>It protects threads from rust and corrosion and prevents loosening from shock and vibration</li><li>It is only removable once cured by heating up parts to 500°F (260°C)</li></ul><h3 class="md-block-header-three">Specification:</h3><ul class="md-block-unordered-list-item"><li>Brand: LOCTITE</li><li>Product Type: Threadlocker</li><li>Colour: Red</li><li>Physical Form: Liquid</li><li>Chemical Basis/Base: Methacrylate</li><li>Threadlocking Strength: High Strength, Low Strength</li><li>Fixture Time: 5-15 min</li><li>Chemical Type: Acrylic</li><li>Components: 1 part</li><li>Odour: Minimal</li><li>Cure Type: Anaerobic Cure</li><li>Flash Point: &gt;199.9°F (93°C)</li><li>Specific Gravity: 1.1 @ 25°C</li><li>Viscosity: 400-600 mPa.s (cP) Brookfield</li><li>Weight: 50 ml</li></ul>

<h3><strong><ins>Henkel Authorized Distributor</ins></strong></h3>
<p>Certification of Quality (COQ) upon request</p>
<h3>LOCTITE 271 Acrylic Anaerobic Threadlocker Red 50ml</h3>
<p>Loctite Threadlocker Red 271 is designed for the permanent locking and sealing of threaded fasteners. LOCTITE is a red, low viscosity, methacrylate-based threadlocking adhesive with high strength. With steel fixture time of 10 min, brass 5 min and stainless steel 15 min. Can tolerate slight contaminations of industrial oils. Suitable for all metal fasteners. Breakaway torque on M10 bolts of 26 Nm. Fluoresces under UV light. High strength, low viscosity, red, methacrylate-based threadlocking adhesive which fluoresces under UV light to allow monitoring.</p>
<h3>Features:</h3>
<ul>
<li>Low viscosity</li>
<li>Resists vibration</li>
<li>High strength</li>
<li>Seals threads - allows through-hole tapping</li>
<li>Fluoresces to allow quality control and inspection</li>
<li>Prevents unwanted movement, loosening, leaks and corrosion</li>
<li>The product cures when confined in the absence of air between close fitting metal surfaces</li>
<li>It protects threads from rust and corrosion and prevents loosening from shock and vibration</li>
<li>It is only removable once cured by heating up parts to 500°F (260°C)</li>
</ul>
<h3>Specification:</h3>
<ul>
<li>Brand: LOCTITE</li>
<li>Product Type: Threadlocker</li>
<li>Colour: Red</li>
<li>Physical Form: Liquid</li>
<li>Chemical Basis/Base: Methacrylate</li>
<li>Threadlocking Strength: High Strength, Low Strength</li>
<li>Fixture Time: 5-15 min</li>
<li>Chemical Type: Acrylic</li>
<li>Components: 1 part</li>
<li>Odour: Minimal</li>
<li>Cure Type: Anaerobic Cure</li>
<li>Flash Point: &gt;199.9°F (93°C)</li>
<li>Specific Gravity: 1.1 @ 25°C</li>
<li>Viscosity: 400-600 mPa.s (cP) Brookfield</li>
<li>Weight: 50 ml</li>
</ul>


Data Sheet_2

Loctite 271 Acrylic Anaerobic Threadlocker Red 50ml Henkel Authorized Distributor

loctite 271 acrylic anaerobic threadlocker red 50ml henkel authorized distributor akrilik anaerobik merah resmi pengunci benang pengedar sah loctite/乐泰 271丙烯酸厌氧线程锁红50毫升汉高授权分销商 螺纹锁 乐泰