Bikeservice

Druck

ELORA

FLUKE

Sika

Pneumatic Air Tools & Equipments

pneumatic-air-tools-equipments

Air Compressors & Inflators

air-compressors-inflators

Test & Measurement

test-measurement

Pressure Measurement

pressure-measurement

Electricals

electricals

Proximity switches

proximity-switches

Weight, Force & Pressure Gauges

weight-force-pressure-gauges

Model: DPI 104-IS
Pressure Range (G1/4):  2 Bar, 7 Bar, 20 Bar, 70 Bar, 200 Bar, 700 Bar 
Pressure Range (1/4NPT): 30 PSI, 100 PSI, 300 PSI,  1000 PSI, 3,000 PSI, 5,000 PSI, 10,000 PSI Pressure Range (9/16 UNF): 1000 Bar 
Pressure Range (9/16 UNF): 15,000 PSI, 20,000 PSI  
Pressure Type  G, A or SG 
Accuracy:  0.05% FS  
Resolution:  Maximum five digits 

Druck’s DPI 104-IS is an intrinsically safe version of the microprocessor-controlled DPI 104-digital pressure gauge. The pressure gauge matches advanced silicon sensor technology with several convenient design features, resulting in an accurate and versatile, yet affordable safe digital test gauge. Supplied as a stand-alone process indicator or in a kit with the widely proven Druck's hand pumps, the DPI 104-IS provides a reliable and economic solution for a wide range of pressure sensing applications. 

Pressure ranges to 20,000 psi (1400 bar) 

Large, easy-to-read display with five-digit resolution 

Free of charge monitoring and control software 

% pressure indication and additional bar graph for quick visual reference 

Temperature compensated accuracy from 14°F to 122°F (-10°C to 50°C) 

Minimum/maximum, tare and alarm functions 

Stainless steel or Inconel pressure cavity for aggressive media 

Burst Pressure 
Burst pressure is 2x working pressure (exception, 20,000 psi (1400 bar); burst pressure 29,000 psi (2000 bar). 

Selectable Pressure Units 
kPa, MPa, kg/cm2, psi, mbar, bar, inHg, inH2O, mH2O, mmH2O and mmHg 

Display 
• Pressure reading: 5 digits with 0.5 in (12.7 mm character height 
• Full scale indicator: 2.5 digits with 0.25 in (6.35 mm) character height 

Pressure Bar Graph 
In addition to the numeric pressure indication, the DPI 104-IS LCD display contains a circular twenty segment bar graph to provide the user with a quick visual estimation of pressure from 0 to 100% full scale output. The bar graph increments represent 5% of the user selectable range. 

Minimum/Maximum Values 
The minimum and maximum pressure values can be displayed on the DPI 104-IS. This function can be enabled/disabled, and reset by the user. 

Switch Test 
The DPI 104-IS features a switch test function that will capture and display the open and closed values from an external pressure switch. Maximum switch impedance 200 Ω. 

Voltage Output 
The DPI 104-IS can be programmed to provide a 0 to 5 V output signal that can be configured as directly proportional to the pressure shown in the display or set to a fixed value. The voltage output mode provides 0.1% FS accuracy from 50 mV to 5 V. 

Alarm Output 
The alarm output consists of an open drain field effect transistor (maximum current 250 mA, maximum voltage 24 VDC) 

Adjustable Mounting Positions 
For added convenience, the DPI 104-IS housing will rotate 320° around the pressure fitting and the faceplate can be rotated in any orientation for optimum visibility. 

Menu Lock 
To guard against unauthorized menu access, the DPI 104-IS features a menu and tare lock function 

RS232 Interface 
Serial communications are provided to allow transfer of data to a PC with the optional serial lead (IA4090-2-V0) (saef area only). Using this link, all menu commands and display data are available via an ASCII command set or the optional SiCal Pro Software.  

Model: DPI 104-IS Pressure Range (G1/4): 2 Bar, 7 Bar, 20 Bar, 70 Bar, 200 Bar, 700 Bar Pressure Range (1/4NPT): 30 PSI, 100 PSI, 300 PSI, 1000 PSI, 3,000 PSI, 5,000 PSI, 10,000 PSI Pressure Range (9/16 UNF): 1000 Bar Pressure Range (9/16 UNF): 15,000 PSI, 20,000 PSI Pressure Type G, A or SG Accuracy: 0.05% FS Resolution: Maximum five digits Druck’s DPI 104-IS is an intrinsically safe version of the microprocessor-controlled DPI 104-digital pressure gauge. The pressure gauge matches advanced silicon sensor technology with several convenient design features, resulting in an accurate and versatile, yet affordable safe digital test gauge. Supplied as a stand-alone process indicator or in a kit with the widely proven Druck&#x27;s hand pumps, the DPI 104-IS provides a reliable and economic solution for a wide range of pressure sensing applications. <h3 class="md-block-header-three">Features and Benefits</h3><ul class="md-block-unordered-list-item"><li> Intrinsically safe </li><li> ATEX and IECEx approval </li><li>0.05% full scale (FS) accuracy </li><li>Pressure ranges to 20,000 psi (1400 bar) </li><li>Eleven selectable pressure units </li><li>Large, easy-to-read display with five-digit resolution </li><li>Free of charge monitoring and control software </li><li>% pressure indication and additional bar graph for quick visual reference </li><li>Temperature compensated accuracy from 14°F to 122°F (-10°C to 50°C) </li><li>Pressure switch test </li><li>Minimum/maximum, tare and alarm functions </li><li>Stainless steel or Inconel pressure cavity for aggressive media </li><li>11 selectable pressure units</li></ul>Burst Pressure Burst pressure is 2x working pressure (exception, 20,000 psi (1400 bar); burst pressure 29,000 psi (2000 bar). Selectable Pressure Units kPa, MPa, kg/cm2, psi, mbar, bar, inHg, inH2O, mH2O, mmH2O and mmHg Display • Pressure reading: 5 digits with 0.5 in (12.7 mm character height • Full scale indicator: 2.5 digits with 0.25 in (6.35 mm) character height Pressure Bar Graph In addition to the numeric pressure indication, the DPI 104-IS LCD display contains a circular twenty segment bar graph to provide the user with a quick visual estimation of pressure from 0 to 100% full scale output. The bar graph increments represent 5% of the user selectable range. Display Update Two times per second Minimum/Maximum Values The minimum and maximum pressure values can be displayed on the DPI 104-IS. This function can be enabled/disabled, and reset by the user. Switch Test The DPI 104-IS features a switch test function that will capture and display the open and closed values from an external pressure switch. Maximum switch impedance 200 Ω. Voltage Output The DPI 104-IS can be programmed to provide a 0 to 5 V output signal that can be configured as directly proportional to the pressure shown in the display or set to a fixed value. The voltage output mode provides 0.1% FS accuracy from 50 mV to 5 V. Alarm Output The alarm output consists of an open drain field effect transistor (maximum current 250 mA, maximum voltage 24 VDC) Adjustable Mounting Positions For added convenience, the DPI 104-IS housing will rotate 320° around the pressure fitting and the faceplate can be rotated in any orientation for optimum visibility. Menu Lock To guard against unauthorized menu access, the DPI 104-IS features a menu and tare lock function RS232 Interface Serial communications are provided to allow transfer of data to a PC with the optional serial lead (IA4090-2-V0) (saef area only). Using this link, all menu commands and display data are available via an ASCII command set or the optional SiCal Pro Software. <h3 class="md-block-header-three">What&#x27;s included? </h3><ul class="md-block-unordered-list-item"><li>9V Alkaline Battery</li><li>Calibration Certificate</li><li>User Guide</li></ul>

Model: DPI 104-IS 
Pressure Range (G1/4): 2 Bar, 7 Bar, 20 Bar, 70 Bar, 200 Bar, 700 Bar 
Pressure Range (1/4NPT): 30 PSI, 100 PSI, 300 PSI, 1000 PSI, 3,000 PSI, 5,000 PSI, 10,000 PSI Pressure Range (9/16 UNF): 1000 Bar 
Pressure Range (9/16 UNF): 15,000 PSI, 20,000 PSI 
Pressure Type G, A or SG 
Accuracy: 0.05% FS 
Resolution: Maximum five digits&nbsp;
Druck’s DPI 104-IS is an intrinsically safe version of the microprocessor-controlled DPI 104-digital pressure gauge. The pressure gauge matches advanced silicon sensor technology with several convenient design features, resulting in an accurate and versatile, yet affordable safe digital test gauge. Supplied as a stand-alone process indicator or in a kit with the widely proven Druck's hand pumps, the DPI 104-IS provides a reliable and economic solution for a wide range of pressure sensing applications.&nbsp;
<h3>Features and Benefits</h3>
<ul>
<li>&nbsp;Intrinsically safe&nbsp;</li>
<li>&nbsp;ATEX and IECEx approval&nbsp;</li>
<li>0.05% full scale (FS) accuracy&nbsp;</li>
<li>Pressure ranges to 20,000 psi (1400 bar)&nbsp;</li>
<li>Eleven selectable pressure units&nbsp;</li>
<li>Large, easy-to-read display with five-digit resolution&nbsp;</li>
<li>Free of charge monitoring and control software&nbsp;</li>
<li>% pressure indication and additional bar graph for quick visual reference&nbsp;</li>
<li>Temperature compensated accuracy from 14°F to 122°F (-10°C to 50°C)&nbsp;</li>
<li>Pressure switch test&nbsp;</li>
<li>Minimum/maximum, tare and alarm functions&nbsp;</li>
<li>Stainless steel or Inconel pressure cavity for aggressive media&nbsp;</li>
<li>11 selectable pressure units</li>
</ul>
Burst Pressure 
Burst pressure is 2x working pressure (exception, 20,000 psi (1400 bar); burst pressure 29,000 psi (2000 bar).&nbsp;
Selectable Pressure Units 
kPa, MPa, kg/cm2, psi, mbar, bar, inHg, inH2O, mH2O, mmH2O and mmHg&nbsp;
Display 
• Pressure reading: 5 digits with 0.5 in (12.7 mm character height 
• Full scale indicator: 2.5 digits with 0.25 in (6.35 mm) character height&nbsp;
Pressure Bar Graph 
In addition to the numeric pressure indication, the DPI 104-IS LCD display contains a circular twenty segment bar graph to provide the user with a quick visual estimation of pressure from 0 to 100% full scale output. The bar graph increments represent 5% of the user selectable range.&nbsp;
Display Update 
Two times per second&nbsp;
Minimum/Maximum Values 
The minimum and maximum pressure values can be displayed on the DPI 104-IS. This function can be enabled/disabled, and reset by the user.&nbsp;
Switch Test 
The DPI 104-IS features a switch test function that will capture and display the open and closed values from an external pressure switch. Maximum switch impedance 200 Ω.&nbsp;
Voltage Output 
The DPI 104-IS can be programmed to provide a 0 to 5 V output signal that can be configured as directly proportional to the pressure shown in the display or set to a fixed value. The voltage output mode provides 0.1% FS accuracy from 50 mV to 5 V.&nbsp;
Alarm Output 
The alarm output consists of an open drain field effect transistor (maximum current 250 mA, maximum voltage 24 VDC)&nbsp;
Adjustable Mounting Positions 
For added convenience, the DPI 104-IS housing will rotate 320° around the pressure fitting and the faceplate can be rotated in any orientation for optimum visibility.&nbsp;
Menu Lock 
To guard against unauthorized menu access, the DPI 104-IS features a menu and tare lock function&nbsp;
RS232 Interface 
Serial communications are provided to allow transfer of data to a PC with the optional serial lead (IA4090-2-V0) (saef area only). Using this link, all menu commands and display data are available via an ASCII command set or the optional SiCal Pro Software.&nbsp;&nbsp;
<h3>What's included?&nbsp;</h3>
<ul>
<li>9V Alkaline Battery</li>
<li>Calibration Certificate</li>
<li>User Guide</li>
</ul>
&nbsp;

DPI104-IS

Adelene

Others

Other Measuring Tools

Humidity & Temperature

Hand Pumps

Meteorological Instrumentation & Equipment

Adelene Teow

buyerIntroduction

Druck Digital Pressure Gauge Intrinsically Safe - Dpi 104-IS

druck digital pressure gauge intrinsically safe dpi 104-is pengukur tekanan aman secara intrinsik weight, force gauges berat, gaya tolok selamat alat daya druck/德鲁克 数字压力表本质安全 重量，力和压力计 德鲁克

druck-digital-pressure-gauge-intrinsically-safe-dpi-104-is

G1/4 Male Calibrated in bar IS

1/4 NPT Male Calibrated in psi IS

9/16 x 18 UNF Calibrated in bar IS

9/16 x 18 UNF Calibrated in psi IS

Connection Type

Model: DPI 104
Pressure Range (G1/4):  2 Bar, 7 Bar, 20 Bar, 70 Bar, 200 Bar, 700 Bar
Pressure Range (1/4NPT): 30 PSI, 100 PSI, 300 PSI,  1000 PSI, 3,000 PSI, 5,000 PSI, 10,000 PSI
Pressure Range (9/16 UNF): 1000 Bar
Pressure Range (9/16 UNF): 15,000 PSI, 20,000 PSI 
Pressure Type  G, A or SG 
Accuracy:  0.05% FS 
Resolution:  Maximum five digits 

The DPI 104 is a microprocessor-controlled digital pressure gauge that combines precision and functionality in a compact, robust and simple-to-use package. The DPI 104 matches advanced silicon sensor technology with several convenient design features, resulting in an accurate, versatile yet affordable digital test gauge. Supplied as a stand-alone process indicator or in a kit with the widely proven Druck hand pumps, the DPI 104 provides a reliable and economic solution for a wide range of pressure sensing applications.

Temperature compensated accuracy from -10°C to 50°C (14°F to 122°F)

IDOS compatible and RS232 serial interface 

Display 
•  Pressure reading: 5 digits with 0.5 in (12.7 mm character height 
•  Full scale indicator: 2.5 digits with 0.25 in (6.35 mm) character height 

Minimum/Maximum Values 
The minimum and maximum pressure values can be displayed on the DPI 104. This function can be enabled/disabled, and reset by the user.

Switch Test 
The DPI 104 features a switch test function that will capture and display the open and closed values from an external pressure switch. Maximum switch impedance 200 Ω. 

Voltage Output 
The DPI 104 can be programmed to provide a 0 to 5 V output signal that can be configured as directly proportional to the pressure shown in the display or set to a fixed value. The voltage output mode provides 0.1% FS accuracy from 50 mV to 5 V.  

Adjustable Mounting Positions 
For added convenience, the DPI 104 housing will rotate 320° around the pressure fitting and the faceplate can be rotated in any orientation for optimum visibility.

Menu Lock 
To guard against unauthorized menu access, the DPI 104 features a menu and tare lock function.

RS232 Interface 
Serial communications are provided to allow transfer of data to a PC with the optional serial lead (IA4090-2-V0). Using this link, all menu commands and display data are available via an ASCII command set or the optional SiCal Pro Software. 

Network Capability 
Up to 99 DPI 104 instruments can be connected together in a daisy chain-configured network. 

Universal Pressure Module (UPM) Capability 
UPM modules can be connected to the DPI 104 to enhance the accuracy and extend the pressure range.  

Model: DPI 104 Pressure Range (G1/4): 2 Bar, 7 Bar, 20 Bar, 70 Bar, 200 Bar, 700 Bar Pressure Range (1/4NPT): 30 PSI, 100 PSI, 300 PSI, 1000 PSI, 3,000 PSI, 5,000 PSI, 10,000 PSI Pressure Range (9/16 UNF): 1000 Bar Pressure Range (9/16 UNF): 15,000 PSI, 20,000 PSI Pressure Type G, A or SG Accuracy: 0.05% FS Resolution: Maximum five digits The DPI 104 is a microprocessor-controlled digital pressure gauge that combines precision and functionality in a compact, robust and simple-to-use package. The DPI 104 matches advanced silicon sensor technology with several convenient design features, resulting in an accurate, versatile yet affordable digital test gauge. Supplied as a stand-alone process indicator or in a kit with the widely proven Druck hand pumps, the DPI 104 provides a reliable and economic solution for a wide range of pressure sensing applications.<h3 class="md-block-header-three">Features and Benefits</h3><ul class="md-block-unordered-list-item"><li>0.05% full scale (FS) accuracy </li><li>Pressure ranges to 20,000 psi (1400 bar) </li><li>Eleven selectable pressure units </li><li>Large, easy-to-read display with five-digit resolution </li><li>% pressure indication and additional bar graph for quick visual reference </li><li>Temperature compensated accuracy from -10°C to 50°C (14°F to 122°F)</li><li>0 to 5V analog output </li><li>Pressure switch test </li><li>Minimum/maximum, tare and alarm functions </li><li>IDOS compatible and RS232 serial interface </li><li>Free of charge monitoring and control software </li><li>Stainless steel or Inconel pressure cavity for aggressive media </li><li>11 selectable pressure units</li></ul>Burst Pressure Burst pressure is 2x working pressure (exception, 20,000 psi (1400 bar); burst pressure 29,000 psi (2000 bar). Selectable Pressure Units kPa, MPa, kg/cm2, psi, mbar, bar, inHg, inH2O, mH2O, mmH2O and mmHg Display • Pressure reading: 5 digits with 0.5 in (12.7 mm character height • Full scale indicator: 2.5 digits with 0.25 in (6.35 mm) character height Minimum/Maximum Values The minimum and maximum pressure values can be displayed on the DPI 104. This function can be enabled/disabled, and reset by the user.Switch Test The DPI 104 features a switch test function that will capture and display the open and closed values from an external pressure switch. Maximum switch impedance 200 Ω. Voltage Output The DPI 104 can be programmed to provide a 0 to 5 V output signal that can be configured as directly proportional to the pressure shown in the display or set to a fixed value. The voltage output mode provides 0.1% FS accuracy from 50 mV to 5 V. Adjustable Mounting Positions For added convenience, the DPI 104 housing will rotate 320° around the pressure fitting and the faceplate can be rotated in any orientation for optimum visibility.Menu Lock To guard against unauthorized menu access, the DPI 104 features a menu and tare lock function.RS232 Interface Serial communications are provided to allow transfer of data to a PC with the optional serial lead (IA4090-2-V0). Using this link, all menu commands and display data are available via an ASCII command set or the optional SiCal Pro Software. Network Capability Up to 99 DPI 104 instruments can be connected together in a daisy chain-configured network. Universal Pressure Module (UPM) Capability UPM modules can be connected to the DPI 104 to enhance the accuracy and extend the pressure range. <h3 class="md-block-header-three">What&#x27;s included? </h3><ul class="md-block-unordered-list-item"><li>9V Alkaline Battery</li><li>Calibration Certificate</li><li>User Guide</li></ul>

Model: DPI 104 
Pressure Range (G1/4): 2 Bar, 7 Bar, 20 Bar, 70 Bar, 200 Bar, 700 Bar 
Pressure Range (1/4NPT): 30 PSI, 100 PSI, 300 PSI, 1000 PSI, 3,000 PSI, 5,000 PSI, 10,000 PSI 
Pressure Range (9/16 UNF): 1000 Bar 
Pressure Range (9/16 UNF): 15,000 PSI, 20,000 PSI 
Pressure Type G, A or SG 
Accuracy: 0.05% FS 
Resolution: Maximum five digits&nbsp;
The DPI 104 is a microprocessor-controlled digital pressure gauge that combines precision and functionality in a compact, robust and simple-to-use package. The DPI 104 matches advanced silicon sensor technology with several convenient design features, resulting in an accurate, versatile yet affordable digital test gauge. Supplied as a stand-alone process indicator or in a kit with the widely proven Druck hand pumps, the DPI 104 provides a reliable and economic solution for a wide range of pressure sensing applications.
<h3>Features and Benefits</h3>
<ul>
<li>0.05% full scale (FS) accuracy&nbsp;</li>
<li>Pressure ranges to 20,000 psi (1400 bar)&nbsp;</li>
<li>Eleven selectable pressure units&nbsp;</li>
<li>Large, easy-to-read display with five-digit resolution&nbsp;</li>
<li>% pressure indication and additional bar graph for quick visual reference&nbsp;</li>
<li>Temperature compensated accuracy from -10°C to 50°C (14°F to 122°F)</li>
<li>0 to 5V analog output&nbsp;</li>
<li>Pressure switch test&nbsp;</li>
<li>Minimum/maximum, tare and alarm functions&nbsp;</li>
<li>IDOS compatible and RS232 serial interface&nbsp;</li>
<li>Free of charge monitoring and control software&nbsp;</li>
<li>Stainless steel or Inconel pressure cavity for aggressive media&nbsp;</li>
<li>11 selectable pressure units</li>
</ul>
Burst Pressure 
Burst pressure is 2x working pressure (exception, 20,000 psi (1400 bar); burst pressure 29,000 psi (2000 bar).&nbsp;
Selectable Pressure Units 
kPa, MPa, kg/cm2, psi, mbar, bar, inHg, inH2O, mH2O, mmH2O and mmHg&nbsp;
Display 
• Pressure reading: 5 digits with 0.5 in (12.7 mm character height 
• Full scale indicator: 2.5 digits with 0.25 in (6.35 mm) character height&nbsp;
Minimum/Maximum Values 
The minimum and maximum pressure values can be displayed on the DPI 104. This function can be enabled/disabled, and reset by the user.
Switch Test 
The DPI 104 features a switch test function that will capture and display the open and closed values from an external pressure switch. Maximum switch impedance 200 Ω.&nbsp;
Voltage Output 
The DPI 104 can be programmed to provide a 0 to 5 V output signal that can be configured as directly proportional to the pressure shown in the display or set to a fixed value. The voltage output mode provides 0.1% FS accuracy from 50 mV to 5 V.&nbsp;&nbsp;
Adjustable Mounting Positions 
For added convenience, the DPI 104 housing will rotate 320° around the pressure fitting and the faceplate can be rotated in any orientation for optimum visibility.
Menu Lock 
To guard against unauthorized menu access, the DPI 104 features a menu and tare lock function.
RS232 Interface 
Serial communications are provided to allow transfer of data to a PC with the optional serial lead (IA4090-2-V0). Using this link, all menu commands and display data are available via an ASCII command set or the optional SiCal Pro Software.&nbsp;
Network Capability 
Up to 99 DPI 104 instruments can be connected together in a daisy chain-configured network.&nbsp;
Universal Pressure Module (UPM) Capability 
UPM modules can be connected to the DPI 104 to enhance the accuracy and extend the pressure range.&nbsp;&nbsp;
<h3>What's included?&nbsp;</h3>
<ul>
<li>9V Alkaline Battery</li>
<li>Calibration Certificate</li>
<li>User Guide</li>
</ul>

DPI104

Druck Digital Pressure Gauge - DPI 104

druck digital pressure gauge dpi 104 pengukur tekanan weight, force gauges berat, gaya tolok alat daya druck/德鲁克 数字压力表 重量，力和压力计 德鲁克

druck-digital-pressure-gauge-dpi-104

G1/4 Male Calibrated in bar

1/4 NPT Male Calibrated in psi

9/16 x 18 UNF Calibrated in bar

9/16 x 18 UNF Calibrated in psi

Model: Type E2.60  
Range: -1 to 60 Bar
Bar Accuracy: 0.5%  
Resolution: 0.01 

SIKA's digital pressure gauges Series TANTUM are particularly suitable for both stationary and mobile measurement and display of pressure. They can be used as reference pressure gauges to simplify the checking, adjustment and calibration of other pressure measurement devices directly on site. 

Continuous or temporary checking of a wide variety of system pressures

Air density measurement in building shells for the detection and elimination of problem areas and avoiding structural damage

Monitoring the degree of soiling of filter units in ventilation or air conditioning systems

Recording pressure drops for the determination of leakage rates in leak tests

Measurement of barometric air pressure for the determination of weather conditions

Reference pressure gauge for calibration tasks

Tare / Zero-Function User-defined zero point setting at the push of a button makes offset adjustment easy and eliminates the need for tedious mechanical adjustment. Single-point adjustment allows the linear characteristic curve to be shifted in positive or negative direction over the entire measuring range.

Display 
The large illuminated digital local display shows the measured pressure and indicates the current status of the digital pressure gauge, even under poor lighting conditions. This eliminates the difficult task of reading a dial gauge and avoiding parallax errors. Needle jitter due to vibration or pressure fluctuations is eliminated. Display damping or averaging can be configured directly using display filters. This ensures easy, tireless readout.

Selectable pressure units 
Another feature is the large selection of pressure units. Up to 6 different units are possible – far more than any complicated dual-scale or multi-scale gauge can offer. The required display unit is selected directly on the digital pressure gauge and is clearly indicated on the display. No conversion necessary; the desired value can be read directly.

Min / Max Displays and Peak function 
Experience shows that excess pressure and pressure peaks significantly higher than normal operating pressure occur at some measuring points. Min / max displays and fast peak value measurement cycles in digital pressure gauges assist in system analysis and allow peak values to be determined. This allows incorrect readings and violations of range limits to be detected and helps avoid damage to pressure systems. Preventive service is often less expensive than repairing or replacing defective instruments.

Protection class 
High IP protection classes (IP67 (front) / IP67) are available to minimize dust and water sensitivity. Rugged, impact-resistant digital pressure gauges are fitted with rubber caps for protection during transport and field use.

Battery operation / Auto-Off 
Power is supplied by long-life batteries (ordinary or rechargeable). An external AC adapter can also be used. To increase battery operating time, a programmable Auto-Off function switches off the power to the instrument after prolonged inactivity. The electronics are designed for extremely low power consumption, which enables a battery life of significantly more than 1500 hours.

Model: Type E2.60 Range: -1 to 60 Bar Bar Accuracy: 0.5% Resolution: 0.01 SIKA&#x27;s digital pressure gauges Series TANTUM are particularly suitable for both stationary and mobile measurement and display of pressure. They can be used as reference pressure gauges to simplify the checking, adjustment and calibration of other pressure measurement devices directly on site. Example applications<ul class="md-block-unordered-list-item"><li>Continuous or temporary checking of a wide variety of system pressures</li><li>Air density measurement in building shells for the detection and elimination of problem areas and avoiding structural damage</li><li>Monitoring the degree of soiling of filter units in ventilation or air conditioning systems</li><li>Recording pressure drops for the determination of leakage rates in leak tests</li><li>Measurement of barometric air pressure for the determination of weather conditions</li><li>Reference pressure gauge for calibration tasks</li></ul><h1 class="md-block-header-one">Description</h1>Tare / Zero-Function User-defined zero point setting at the push of a button makes offset adjustment easy and eliminates the need for tedious mechanical adjustment. Single-point adjustment allows the linear characteristic curve to be shifted in positive or negative direction over the entire measuring range.Display The large illuminated digital local display shows the measured pressure and indicates the current status of the digital pressure gauge, even under poor lighting conditions. This eliminates the difficult task of reading a dial gauge and avoiding parallax errors. Needle jitter due to vibration or pressure fluctuations is eliminated. Display damping or averaging can be configured directly using display filters. This ensures easy, tireless readout.Selectable pressure units Another feature is the large selection of pressure units. Up to 6 different units are possible – far more than any complicated dual-scale or multi-scale gauge can offer. The required display unit is selected directly on the digital pressure gauge and is clearly indicated on the display. No conversion necessary; the desired value can be read directly.Min / Max Displays and Peak function Experience shows that excess pressure and pressure peaks significantly higher than normal operating pressure occur at some measuring points. Min / max displays and fast peak value measurement cycles in digital pressure gauges assist in system analysis and allow peak values to be determined. This allows incorrect readings and violations of range limits to be detected and helps avoid damage to pressure systems. Preventive service is often less expensive than repairing or replacing defective instruments.Protection class High IP protection classes (IP67 (front) / IP67) are available to minimize dust and water sensitivity. Rugged, impact-resistant digital pressure gauges are fitted with rubber caps for protection during transport and field use.Battery operation / Auto-Off Power is supplied by long-life batteries (ordinary or rechargeable). An external AC adapter can also be used. To increase battery operating time, a programmable Auto-Off function switches off the power to the instrument after prolonged inactivity. The electronics are designed for extremely low power consumption, which enables a battery life of significantly more than 1500 hours.Approvals<figure class="md-block-image"><img src="https://storage.googleapis.com/eezee-product-images/UYc0qgxA7boA3m9IRysabW.png" alt="" /><figcaption class="md-block-image-caption"></figcaption></figure>What&#x27;s included? <ul class="md-block-unordered-list-item"><li>Digital Pressure Gauge </li><li>Protection cap </li><li>2x Batteries 1.5V</li><li>Test certificate </li><li>Operating manual </li></ul>

Model: Type E2.60 
Range: -1 to 60 Bar 
Bar Accuracy: 0.5% 
Resolution: 0.01 
 
SIKA's digital pressure gauges Series TANTUM are particularly suitable for both stationary and mobile measurement and display of pressure. They can be used as reference pressure gauges to simplify the checking, adjustment and calibration of other pressure measurement devices directly on site.&nbsp;
Example applications
<ul>
<li>Continuous or temporary checking of a wide variety of system pressures</li>
<li>Air density measurement in building shells for the detection and elimination of problem areas and avoiding structural damage</li>
<li>Monitoring the degree of soiling of filter units in ventilation or air conditioning systems</li>
<li>Recording pressure drops for the determination of leakage rates in leak tests</li>
<li>Measurement of barometric air pressure for the determination of weather conditions</li>
<li>Reference pressure gauge for calibration tasks</li>
</ul>
<h1>Description</h1>
Tare / Zero-Function User-defined zero point setting at the push of a button makes offset adjustment easy and eliminates the need for tedious mechanical adjustment. Single-point adjustment allows the linear characteristic curve to be shifted in positive or negative direction over the entire measuring range.
Display 
The large illuminated digital local display shows the measured pressure and indicates the current status of the digital pressure gauge, even under poor lighting conditions. This eliminates the difficult task of reading a dial gauge and avoiding parallax errors. Needle jitter due to vibration or pressure fluctuations is eliminated. Display damping or averaging can be configured directly using display filters. This ensures easy, tireless readout.
Selectable pressure units 
Another feature is the large selection of pressure units. Up to 6 different units are possible – far more than any complicated dual-scale or multi-scale gauge can offer. The required display unit is selected directly on the digital pressure gauge and is clearly indicated on the display. No conversion necessary; the desired value can be read directly.
Min / Max Displays and Peak function 
Experience shows that excess pressure and pressure peaks significantly higher than normal operating pressure occur at some measuring points. Min / max displays and fast peak value measurement cycles in digital pressure gauges assist in system analysis and allow peak values to be determined. This allows incorrect readings and violations of range limits to be detected and helps avoid damage to pressure systems. Preventive service is often less expensive than repairing or replacing defective instruments.
Protection class 
High IP protection classes (IP67 (front) / IP67) are available to minimize dust and water sensitivity. Rugged, impact-resistant digital pressure gauges are fitted with rubber caps for protection during transport and field use.
Battery operation / Auto-Off 
Power is supplied by long-life batteries (ordinary or rechargeable). An external AC adapter can also be used. To increase battery operating time, a programmable Auto-Off function switches off the power to the instrument after prolonged inactivity. The electronics are designed for extremely low power consumption, which enables a battery life of significantly more than 1500 hours.
Approvals

 <div class="img-ctnr">
 <amp-img 
 on="tap:4r5im"
 tabindex="0"
 role="button"
 class="contain"
 layout="fill"
 src="https://storage.googleapis.com/eezee-product-images/UYc0qgxA7boA3m9IRysabW.png"
 ></amp-img>
 </div>
 
 <amp-image-lightbox 
 id="4r5im" 
 layout="nodisplay"></amp-image-lightbox>

 
What's included?&nbsp;
<ul>
<li>Digital Pressure Gauge&nbsp;</li>
<li>Protection cap&nbsp;</li>
<li>2x Batteries 1.5V</li>
<li>Test certificate&nbsp;</li>
<li>Operating manual&nbsp;</li>
</ul>
&nbsp;

SIKA Pressure Gauge

Sika Digital Pressure Gauges - E2.60

sika digital pressure gauges e2.60 pengukur tekanan weight, force berat, gaya tolok alat daya 西卡数字压力表-e2.60 重量，力和压力计 西卡

sika-digital-pressure-gauges-e2-60

Model: Type E2.700   
Range: 0 to 700 Bar 
Accuracy: 0.5%   
Resolution: 0.01   

SIKA's digital pressure gauges Series TANTUM are particularly suitable for both stationary and mobile measurement and display of pressure. They can be used as reference pressure gauges to simplify the checking, adjustment and calibration of other pressure measurement devices directly on site. 

Tare / Zero-Function 
User-defined zero point setting at the push of a button makes offset adjustment easy and eliminates the need for tedious mechanical adjustment. Single-point adjustment allows the linear characteristic curve to be shifted in positive or negative direction over the entire measuring range.

Display  
The large illuminated digital local display shows the measured pressure and indicates the current status of the digital pressure gauge, even under poor lighting conditions. This eliminates the difficult task of reading a dial gauge and avoiding parallax errors. Needle jitter due to vibration or pressure fluctuations is eliminated. Display damping or averaging can be configured directly using display filters. This ensures easy, tireless readout.

Selectable pressure units  
Another feature is the large selection of pressure units. Up to 6 different units are possible – far more than any complicated dual-scale or multi-scale gauge can offer. The required display unit is selected directly on the digital pressure gauge and is clearly indicated on the display. No conversion necessary; the desired value can be read directly.

Min / Max Displays and Peak function  
Experience shows that excess pressure and pressure peaks significantly higher than normal operating pressure occur at some measuring points. Min / max displays and fast peak value measurement cycles in digital pressure gauges assist in system analysis and allow peak values to be determined. This allows incorrect readings and violations of range limits to be detected and helps avoid damage to pressure systems. Preventive service is often less expensive than repairing or replacing defective instruments.

Protection class  
High IP protection classes (IP67 (front) / IP67) are available to minimize dust and water sensitivity. Rugged, impact-resistant digital pressure gauges are fitted with rubber caps for protection during transport and field use.

Battery operation / Auto-Off  
Power is supplied by long-life batteries (ordinary or rechargeable). An external AC adapter can also be used. To increase battery operating time, a programmable Auto-Off function switches off the power to the instrument after prolonged inactivity. The electronics are designed for extremely low power consumption, which enables a battery life of significantly more than 1500 hours.

Model: Type E2.700 Range: 0 to 700 Bar Accuracy: 0.5% Resolution: 0.01 SIKA&#x27;s digital pressure gauges Series TANTUM are particularly suitable for both stationary and mobile measurement and display of pressure. They can be used as reference pressure gauges to simplify the checking, adjustment and calibration of other pressure measurement devices directly on site. Example applications<ul class="md-block-unordered-list-item"><li>Continuous or temporary checking of a wide variety of system pressures</li><li>Air density measurement in building shells for the detection and elimination of problem areas and avoiding structural damage</li><li>Monitoring the degree of soiling of filter units in ventilation or air conditioning systems</li><li>Recording pressure drops for the determination of leakage rates in leak tests</li><li>Measurement of barometric air pressure for the determination of weather conditions</li><li>Reference pressure gauge for calibration tasks</li></ul><h1 class="md-block-header-one">Description</h1>Tare / Zero-Function User-defined zero point setting at the push of a button makes offset adjustment easy and eliminates the need for tedious mechanical adjustment. Single-point adjustment allows the linear characteristic curve to be shifted in positive or negative direction over the entire measuring range.Display The large illuminated digital local display shows the measured pressure and indicates the current status of the digital pressure gauge, even under poor lighting conditions. This eliminates the difficult task of reading a dial gauge and avoiding parallax errors. Needle jitter due to vibration or pressure fluctuations is eliminated. Display damping or averaging can be configured directly using display filters. This ensures easy, tireless readout.Selectable pressure units Another feature is the large selection of pressure units. Up to 6 different units are possible – far more than any complicated dual-scale or multi-scale gauge can offer. The required display unit is selected directly on the digital pressure gauge and is clearly indicated on the display. No conversion necessary; the desired value can be read directly.Min / Max Displays and Peak function Experience shows that excess pressure and pressure peaks significantly higher than normal operating pressure occur at some measuring points. Min / max displays and fast peak value measurement cycles in digital pressure gauges assist in system analysis and allow peak values to be determined. This allows incorrect readings and violations of range limits to be detected and helps avoid damage to pressure systems. Preventive service is often less expensive than repairing or replacing defective instruments.Protection class High IP protection classes (IP67 (front) / IP67) are available to minimize dust and water sensitivity. Rugged, impact-resistant digital pressure gauges are fitted with rubber caps for protection during transport and field use.Battery operation / Auto-Off Power is supplied by long-life batteries (ordinary or rechargeable). An external AC adapter can also be used. To increase battery operating time, a programmable Auto-Off function switches off the power to the instrument after prolonged inactivity. The electronics are designed for extremely low power consumption, which enables a battery life of significantly more than 1500 hours.Approvals<figure class="md-block-image"><img src="https://storage.googleapis.com/eezee-product-images/xiKw3X0prTnwIUG5Fh2gBL.png" alt="" /><figcaption class="md-block-image-caption"></figcaption></figure>What&#x27;s included? <ul class="md-block-unordered-list-item"><li>Digital Pressure Gauge </li><li>Protection cap </li><li>2x Batteries 1.5V</li><li>Test certificate </li><li>Operating manual </li></ul>

Model: Type E2.700 
Range: 0 to 700 Bar 
Accuracy: 0.5% 
Resolution: 0.01&nbsp;&nbsp;&nbsp;
SIKA's digital pressure gauges Series TANTUM are particularly suitable for both stationary and mobile measurement and display of pressure. They can be used as reference pressure gauges to simplify the checking, adjustment and calibration of other pressure measurement devices directly on site.&nbsp;
Example applications
<ul>
<li>Continuous or temporary checking of a wide variety of system pressures</li>
<li>Air density measurement in building shells for the detection and elimination of problem areas and avoiding structural damage</li>
<li>Monitoring the degree of soiling of filter units in ventilation or air conditioning systems</li>
<li>Recording pressure drops for the determination of leakage rates in leak tests</li>
<li>Measurement of barometric air pressure for the determination of weather conditions</li>
<li>Reference pressure gauge for calibration tasks</li>
</ul>
<h1>Description</h1>
Tare / Zero-Function 
User-defined zero point setting at the push of a button makes offset adjustment easy and eliminates the need for tedious mechanical adjustment. Single-point adjustment allows the linear characteristic curve to be shifted in positive or negative direction over the entire measuring range.
Display 
The large illuminated digital local display shows the measured pressure and indicates the current status of the digital pressure gauge, even under poor lighting conditions. This eliminates the difficult task of reading a dial gauge and avoiding parallax errors. Needle jitter due to vibration or pressure fluctuations is eliminated. Display damping or averaging can be configured directly using display filters. This ensures easy, tireless readout.
Selectable pressure units 
Another feature is the large selection of pressure units. Up to 6 different units are possible – far more than any complicated dual-scale or multi-scale gauge can offer. The required display unit is selected directly on the digital pressure gauge and is clearly indicated on the display. No conversion necessary; the desired value can be read directly.
Min / Max Displays and Peak function 
Experience shows that excess pressure and pressure peaks significantly higher than normal operating pressure occur at some measuring points. Min / max displays and fast peak value measurement cycles in digital pressure gauges assist in system analysis and allow peak values to be determined. This allows incorrect readings and violations of range limits to be detected and helps avoid damage to pressure systems. Preventive service is often less expensive than repairing or replacing defective instruments.
Protection class 
High IP protection classes (IP67 (front) / IP67) are available to minimize dust and water sensitivity. Rugged, impact-resistant digital pressure gauges are fitted with rubber caps for protection during transport and field use.
Battery operation / Auto-Off 
Power is supplied by long-life batteries (ordinary or rechargeable). An external AC adapter can also be used. To increase battery operating time, a programmable Auto-Off function switches off the power to the instrument after prolonged inactivity. The electronics are designed for extremely low power consumption, which enables a battery life of significantly more than 1500 hours.
Approvals

 <div class="img-ctnr">
 <amp-img 
 on="tap:4ebjd"
 tabindex="0"
 role="button"
 class="contain"
 layout="fill"
 src="https://storage.googleapis.com/eezee-product-images/xiKw3X0prTnwIUG5Fh2gBL.png"
 ></amp-img>
 </div>
 
 <amp-image-lightbox 
 id="4ebjd" 
 layout="nodisplay"></amp-image-lightbox>

 
What's included?&nbsp;
<ul>
<li>Digital Pressure Gauge&nbsp;</li>
<li>Protection cap&nbsp;</li>
<li>2x Batteries 1.5V</li>
<li>Test certificate&nbsp;</li>
<li>Operating manual&nbsp;</li>
</ul>

Sika Digital Pressure Gauges - E2.700

sika digital pressure gauges e2.700 pengukur tekanan weight, force berat, gaya tolok alat daya 西卡数字压力表-e2.700 重量，力和压力计 西卡

sika-digital-pressure-gauges-e2-700

Model: Type E40.2 
Range: -1 to 40 Bar
Accuracy: 0.5% 
Resolution: 0.01 

Tare / Zero-Function
User-defined zero point setting at the push of a button makes offset adjustment easy and eliminates the need for tedious mechanical adjustment. Single-point adjustment allows the linear characteristic curve to be shifted in positive or negative direction over the entire measuring range.

Display
The large illuminated digital local display shows the measured pressure and indicates the current status of the digital pressure gauge, even under poor lighting conditions. This eliminates the difficult task of reading a dial gauge and avoiding parallax errors. Needle jitter due to vibration or pressure fluctuations is eliminated. Display damping or averaging can be configured directly using display filters. This ensures easy, tireless readout.

Selectable pressure units
Another feature is the large selection of pressure units. Up to 6 different units are possible – far more than any complicated dual-scale or multi-scale gauge can offer.
The required display unit is selected directly on the digital pressure gauge and is clearly indicated on the display. No conversion necessary; the desired value can be read directly.

Min / Max Displays and Peak function
Experience shows that excess pressure and pressure peaks significantly higher than normal operating pressure occur at some measuring points. Min / max displays and fast peak value measurement cycles in digital pressure gauges assist in system analysis and allow peak values to be determined. This allows incorrect readings and violations of range limits to be detected and helps avoid damage to pressure systems. Preventive service is often less expensive than repairing or replacing defective instruments.

Protection class
High IP protection classes (IP67 (front) / IP67) are available to minimize dust and water sensitivity. Rugged, impact-resistant digital pressure gauges are fitted with rubber caps for protection during transport and field use.

Battery operation / Auto-Off
Power is supplied by long-life batteries (ordinary or rechargeable). An external AC adapter can also be used. To increase battery operating time, a programmable Auto-Off function switches off the power to the instrument after prolonged inactivity. The electronics are designed for extremely low power consumption, which enables a battery life of significantly more than 1500 hours.

Model: Type E40.2 Range: -1 to 40 Bar Accuracy: 0.5% Resolution: 0.01 SIKA&#x27;s digital pressure gauges Series TANTUM are particularly suitable for both stationary and mobile measurement and display of pressure. They can be used as reference pressure gauges to simplify the checking, adjustment and calibration of other pressure measurement devices directly on site. Example applications<ul class="md-block-unordered-list-item"><li>Continuous or temporary checking of a wide variety of system pressures</li><li>Air density measurement in building shells for the detection and elimination of problem areas and avoiding structural damage</li><li>Monitoring the degree of soiling of filter units in ventilation or air conditioning systems</li><li>Recording pressure drops for the determination of leakage rates in leak tests</li><li>Measurement of barometric air pressure for the determination of weather conditions</li><li>Reference pressure gauge for calibration tasks</li></ul><h1 class="md-block-header-one">Description</h1>Tare / Zero-Function User-defined zero point setting at the push of a button makes offset adjustment easy and eliminates the need for tedious mechanical adjustment. Single-point adjustment allows the linear characteristic curve to be shifted in positive or negative direction over the entire measuring range.Display The large illuminated digital local display shows the measured pressure and indicates the current status of the digital pressure gauge, even under poor lighting conditions. This eliminates the difficult task of reading a dial gauge and avoiding parallax errors. Needle jitter due to vibration or pressure fluctuations is eliminated. Display damping or averaging can be configured directly using display filters. This ensures easy, tireless readout.Selectable pressure units Another feature is the large selection of pressure units. Up to 6 different units are possible – far more than any complicated dual-scale or multi-scale gauge can offer. The required display unit is selected directly on the digital pressure gauge and is clearly indicated on the display. No conversion necessary; the desired value can be read directly.Min / Max Displays and Peak function Experience shows that excess pressure and pressure peaks significantly higher than normal operating pressure occur at some measuring points. Min / max displays and fast peak value measurement cycles in digital pressure gauges assist in system analysis and allow peak values to be determined. This allows incorrect readings and violations of range limits to be detected and helps avoid damage to pressure systems. Preventive service is often less expensive than repairing or replacing defective instruments.Protection class High IP protection classes (IP67 (front) / IP67) are available to minimize dust and water sensitivity. Rugged, impact-resistant digital pressure gauges are fitted with rubber caps for protection during transport and field use.Battery operation / Auto-Off Power is supplied by long-life batteries (ordinary or rechargeable). An external AC adapter can also be used. To increase battery operating time, a programmable Auto-Off function switches off the power to the instrument after prolonged inactivity. The electronics are designed for extremely low power consumption, which enables a battery life of significantly more than 1500 hours.Approvals<figure class="md-block-image"><img src="https://storage.googleapis.com/eezee-product-images/R3S_drZKDaQGm3x9Sx0QbK.png" alt="" /><figcaption class="md-block-image-caption"></figcaption></figure>What&#x27;s included? <ul class="md-block-unordered-list-item"><li>Digital Pressure Gauge </li><li>Protection cap </li><li>2x Batteries 1.5V</li><li>Test certificate </li><li>Operating manual </li></ul>

Model: Type E40.2 
Range: -1 to 40 Bar 
Accuracy: 0.5% 
Resolution: 0.01&nbsp;
SIKA's digital pressure gauges Series TANTUM are particularly suitable for both stationary and mobile measurement and display of pressure. They can be used as reference pressure gauges to simplify the checking, adjustment and calibration of other pressure measurement devices directly on site.&nbsp;
Example applications
<ul>
<li>Continuous or temporary checking of a wide variety of system pressures</li>
<li>Air density measurement in building shells for the detection and elimination of problem areas and avoiding structural damage</li>
<li>Monitoring the degree of soiling of filter units in ventilation or air conditioning systems</li>
<li>Recording pressure drops for the determination of leakage rates in leak tests</li>
<li>Measurement of barometric air pressure for the determination of weather conditions</li>
<li>Reference pressure gauge for calibration tasks</li>
</ul>
<h1>Description</h1>
Tare / Zero-Function 
User-defined zero point setting at the push of a button makes offset adjustment easy and eliminates the need for tedious mechanical adjustment. Single-point adjustment allows the linear characteristic curve to be shifted in positive or negative direction over the entire measuring range.
Display 
The large illuminated digital local display shows the measured pressure and indicates the current status of the digital pressure gauge, even under poor lighting conditions. This eliminates the difficult task of reading a dial gauge and avoiding parallax errors. Needle jitter due to vibration or pressure fluctuations is eliminated. Display damping or averaging can be configured directly using display filters. This ensures easy, tireless readout.
Selectable pressure units 
Another feature is the large selection of pressure units. Up to 6 different units are possible – far more than any complicated dual-scale or multi-scale gauge can offer. 
The required display unit is selected directly on the digital pressure gauge and is clearly indicated on the display. No conversion necessary; the desired value can be read directly.
Min / Max Displays and Peak function 
Experience shows that excess pressure and pressure peaks significantly higher than normal operating pressure occur at some measuring points. Min / max displays and fast peak value measurement cycles in digital pressure gauges assist in system analysis and allow peak values to be determined. This allows incorrect readings and violations of range limits to be detected and helps avoid damage to pressure systems. Preventive service is often less expensive than repairing or replacing defective instruments.
Protection class 
High IP protection classes (IP67 (front) / IP67) are available to minimize dust and water sensitivity. Rugged, impact-resistant digital pressure gauges are fitted with rubber caps for protection during transport and field use.
Battery operation / Auto-Off 
Power is supplied by long-life batteries (ordinary or rechargeable). An external AC adapter can also be used. To increase battery operating time, a programmable Auto-Off function switches off the power to the instrument after prolonged inactivity. The electronics are designed for extremely low power consumption, which enables a battery life of significantly more than 1500 hours.
Approvals

 <div class="img-ctnr">
 <amp-img 
 on="tap:5co5t"
 tabindex="0"
 role="button"
 class="contain"
 layout="fill"
 src="https://storage.googleapis.com/eezee-product-images/R3S_drZKDaQGm3x9Sx0QbK.png"
 ></amp-img>
 </div>
 
 <amp-image-lightbox 
 id="5co5t" 
 layout="nodisplay"></amp-image-lightbox>

 
What's included?&nbsp;&nbsp;
<ul>
<li>Digital Pressure Gauge&nbsp;</li>
<li>Protection cap&nbsp;</li>
<li>2x Batteries 1.5V</li>
<li>Test certificate&nbsp;</li>
<li>Operating manual&nbsp;</li>
</ul>

Sika Digital Pressure Gauges - E2.40

sika digital pressure gauges e2.40 pengukur tekanan weight, force berat, gaya tolok alat daya 西卡数字压力表-e2.40 重量，力和压力计 西卡

sika-digital-pressure-gauges-e2-40

Fluke FLUKE-700GA4 G 1/4 Digital Pressure Gauge 1bar Bottom Entry, FLUKE-700GA4, RS232, 0bar Min.

Fluke 700G Series precision pressure gauge calibrators are portable, high quality calibrators offering fast and accurate calibration test results. The 700G models are easy-to-use and of rugged construction for reliable performance in different environments. They are compatible with most hydraulic and pneumatic test pumps.

The 700G gauges can be combined with the 7588920 (700PTPK) or 7588926 (700HTPK) pump kits, available separately, for a complete pressure testing solution for up to 600psi with the PTP-1 pneumatic pump and up to 10,000psi with the HTP-2 hydraulic pump. Up to 8493 pressure measurements can be logged to memory using 7588923 700G/TRACK logging software (available separately).

<h3 class="md-block-header-three">Fluke FLUKE-700GA4 G 1/4 Digital Pressure Gauge 1bar Bottom Entry, FLUKE-700GA4, RS232, 0bar Min.</h3>Fluke 700G Series precision pressure gauge calibrators are portable, high quality calibrators offering fast and accurate calibration test results. The 700G models are easy-to-use and of rugged construction for reliable performance in different environments. They are compatible with most hydraulic and pneumatic test pumps. NoteThe 700G gauges can be combined with the 7588920 (700PTPK) or 7588926 (700HTPK) pump kits, available separately, for a complete pressure testing solution for up to 600psi with the PTP-1 pneumatic pump and up to 10,000psi with the HTP-2 hydraulic pump. Up to 8493 pressure measurements can be logged to memory using 7588923 700G/TRACK logging software (available separately).ApprovalsCSA, ATEX

<h3>Fluke FLUKE-700GA4 G 1/4 Digital Pressure Gauge 1bar Bottom Entry, FLUKE-700GA4, RS232, 0bar Min.</h3>
Fluke 700G Series precision pressure gauge calibrators are portable, high quality calibrators offering fast and accurate calibration test results. The 700G models are easy-to-use and of rugged construction for reliable performance in different environments. They are compatible with most hydraulic and pneumatic test pumps.

Note
The 700G gauges can be combined with the 7588920 (700PTPK) or 7588926 (700HTPK) pump kits, available separately, for a complete pressure testing solution for up to 600psi with the PTP-1 pneumatic pump and up to 10,000psi with the HTP-2 hydraulic pump. Up to 8493 pressure measurements can be logged to memory using 7588923 700G/TRACK logging software (available separately).
Approvals
CSA, ATEX

RS Pro

SCHNEIDER ELECTRIC

Fluke Networks

Abus

Screw

O Ring

Surface Mount Resistors

Circular Connectors

Contactors

Bolts

Panel Mount Indicators 

Molded Case Circuit Breakers - MCCBs

Junction & Enclosure Box

Electrical Wire 

RS Components ETH SG

fluke fluke-700ga4 1/4 digital pressure gauge 1bar bottom entry, fluke-700ga4, rs232, 0bar min. pengukur tekanan entri bawah, weight, force gauges berat, gaya tolok kemasukan bawah 1bar, alat daya fluke/福禄克 数字压力计 底部入口，fluke-700ga4，rs232，0bar 最小。 重量，力和压力计 福禄克

fluke-fluke-700ga4-g-1-4-digital-pressure-gauge-1bar-bottom-entry-fluke-700ga4-rs232-0bar-min

Fluke FLUKE-700GA5 G 1/4 Digital Pressure Gauge 2bar Bottom Entry, FLUKE-700GA5, RS232, 0bar Min.

<h3 class="md-block-header-three">Fluke FLUKE-700GA5 G 1/4 Digital Pressure Gauge 2bar Bottom Entry, FLUKE-700GA5, RS232, 0bar Min.</h3>Fluke 700G Series precision pressure gauge calibrators are portable, high quality calibrators offering fast and accurate calibration test results. The 700G models are easy-to-use and of rugged construction for reliable performance in different environments. They are compatible with most hydraulic and pneumatic test pumps. NoteThe 700G gauges can be combined with the 7588920 (700PTPK) or 7588926 (700HTPK) pump kits, available separately, for a complete pressure testing solution for up to 600psi with the PTP-1 pneumatic pump and up to 10,000psi with the HTP-2 hydraulic pump. Up to 8493 pressure measurements can be logged to memory using 7588923 700G/TRACK logging software (available separately).ApprovalsCSA, ATEX

<h3>Fluke FLUKE-700GA5 G 1/4 Digital Pressure Gauge 2bar Bottom Entry, FLUKE-700GA5, RS232, 0bar Min.</h3>
Fluke 700G Series precision pressure gauge calibrators are portable, high quality calibrators offering fast and accurate calibration test results. The 700G models are easy-to-use and of rugged construction for reliable performance in different environments. They are compatible with most hydraulic and pneumatic test pumps.

Note
The 700G gauges can be combined with the 7588920 (700PTPK) or 7588926 (700HTPK) pump kits, available separately, for a complete pressure testing solution for up to 600psi with the PTP-1 pneumatic pump and up to 10,000psi with the HTP-2 hydraulic pump. Up to 8493 pressure measurements can be logged to memory using 7588923 700G/TRACK logging software (available separately).
Approvals
CSA, ATEX

fluke fluke-700ga5 1/4 digital pressure gauge 2bar bottom entry, fluke-700ga5, rs232, 0bar min. pengukur tekanan entri bawah, weight, force gauges berat, gaya tolok kemasukan bawah 2bar, alat daya fluke/福禄克 数字压力计 底部入口，fluke-700ga5，rs232，0bar 最小。 重量，力和压力计 福禄克

fluke-fluke-700ga5-g-1-4-digital-pressure-gauge-2bar-bottom-entry-fluke-700ga5-rs232-0bar-min

Fluke 700G05 G 1/4 Digital Pressure Gauge 2bar Bottom Entry 114mm Outside Diameter

<h3 class="md-block-header-three">Fluke 700G05 G 1/4 Digital Pressure Gauge 2bar Bottom Entry 114mm Outside Diameter</h3><ul class="md-block-unordered-list-item"><li>Maximum Pressure Measurement	2bar</li><li>Minimum Pressure Measurement	-0.97bar</li><li>Mounting Type	Bottom Entry</li><li>Display Type	Digital</li><li>Connection Size	G 1/4</li><li>Gauge Outside Diameter	114mm</li><li>Best Accuracy	±0.05%</li><li>Case Material	Cast ZnAl</li><li>Minimum Operating Temperature	-10°C</li><li>Maximum Operating Temperature	+55°C</li></ul>

<h3>Fluke 700G05 G 1/4 Digital Pressure Gauge 2bar Bottom Entry 114mm Outside Diameter</h3>
<ul>
<li>Maximum Pressure Measurement	2bar</li>
<li>Minimum Pressure Measurement	-0.97bar</li>
<li>Mounting Type	Bottom Entry</li>
<li>Display Type	Digital</li>
<li>Connection Size	G 1/4</li>
<li>Gauge Outside Diameter	114mm</li>
<li>Best Accuracy	±0.05%</li>
<li>Case Material	Cast ZnAl</li>
<li>Minimum Operating Temperature	-10°C</li>
<li>Maximum Operating Temperature	+55°C</li>
</ul>

Fluke 700G Series Precision Pressure Test Gauges Data Sheet

User Manual

Certificate

fluke 700g05 1/4 digital pressure gauge 2bar bottom entry 114mm outside diameter pengukur tekanan masuk bawah luar weight, force gauges berat, gaya tolok kemasukan alat daya fluke/福禄克 数字压力表 底部入口 外径 重量，力和压力计 福禄克

fluke-700g05-g-1-4-digital-pressure-gauge-2bar-bottom-entry-114mm-outside-diameter

Fluke 700G08 G 1/4 Digital Pressure Gauge 69bar Bottom Entry, Fluke-700G08, RS232, -0.97bar Min.

<h3 class="md-block-header-three">Fluke 700G08 G 1/4 Digital Pressure Gauge 69bar Bottom Entry, Fluke-700G08, RS232, -0.97bar Min.</h3> Fluke 700G Series precision pressure gauge calibrators are portable, high quality calibrators offering fast and accurate calibration test results. The 700G models are easy-to-use and of rugged construction for reliable performance in different environments. They are compatible with most hydraulic and pneumatic test pumps. NoteThe 700G gauges can be combined with the 7588920 (700PTPK) or 7588926 (700HTPK) pump kits, available separately, for a complete pressure testing solution for up to 600psi with the PTP-1 pneumatic pump and up to 10,000psi with the HTP-2 hydraulic pump. Up to 8493 pressure measurements can be logged to memory using 7588923 700G/TRACK logging software (available separately).ApprovalsCSA, ATEX

<h3>Fluke 700G08 G 1/4 Digital Pressure Gauge 69bar Bottom Entry, Fluke-700G08, RS232, -0.97bar Min.</h3>

Fluke 700G Series precision pressure gauge calibrators are portable, high quality calibrators offering fast and accurate calibration test results. The 700G models are easy-to-use and of rugged construction for reliable performance in different environments. They are compatible with most hydraulic and pneumatic test pumps.

Note
The 700G gauges can be combined with the 7588920 (700PTPK) or 7588926 (700HTPK) pump kits, available separately, for a complete pressure testing solution for up to 600psi with the PTP-1 pneumatic pump and up to 10,000psi with the HTP-2 hydraulic pump. Up to 8493 pressure measurements can be logged to memory using 7588923 700G/TRACK logging software (available separately).
Approvals
CSA, ATEX

fluke 700g08 1/4 digital pressure gauge 69bar bottom entry, fluke-700g08, rs232, -0.97bar min. pengukur tekanan entri bawah, -0,97bar weight, force gauges berat, gaya tolok kemasukan bawah 69bar, alat daya fluke/福禄克 数字压力表 底部入口，fluke-700g08，rs232，-0.97bar 最小。 重量，力和压力计 福禄克

fluke-700g08-g-1-4-digital-pressure-gauge-69bar-bottom-entry-fluke-700g08-rs232-0-97bar-min

Fluke 700G30 G 1/4 Digital Pressure Gauge 340bar Bottom Entry, RS232, -0.97bar Min.


Fluke 700G Series precision pressure gauge calibrators are portable, high quality calibrators offering fast and accurate calibration test results. The 700G models are easy-to-use and of rugged construction for reliable performance in different environments. They are compatible with most hydraulic and pneumatic test pumps.

<h3 class="md-block-header-three">Fluke 700G30 G 1/4 Digital Pressure Gauge 340bar Bottom Entry, RS232, -0.97bar Min.</h3> Fluke 700G Series precision pressure gauge calibrators are portable, high quality calibrators offering fast and accurate calibration test results. The 700G models are easy-to-use and of rugged construction for reliable performance in different environments. They are compatible with most hydraulic and pneumatic test pumps. NoteThe 700G gauges can be combined with the 7588920 (700PTPK) or 7588926 (700HTPK) pump kits, available separately, for a complete pressure testing solution for up to 600psi with the PTP-1 pneumatic pump and up to 10,000psi with the HTP-2 hydraulic pump. Up to 8493 pressure measurements can be logged to memory using 7588923 700G/TRACK logging software (available separately).ApprovalsCSA, ATEX

<h3>Fluke 700G30 G 1/4 Digital Pressure Gauge 340bar Bottom Entry, RS232, -0.97bar Min.</h3>
 
Fluke 700G Series precision pressure gauge calibrators are portable, high quality calibrators offering fast and accurate calibration test results. The 700G models are easy-to-use and of rugged construction for reliable performance in different environments. They are compatible with most hydraulic and pneumatic test pumps.

Note
The 700G gauges can be combined with the 7588920 (700PTPK) or 7588926 (700HTPK) pump kits, available separately, for a complete pressure testing solution for up to 600psi with the PTP-1 pneumatic pump and up to 10,000psi with the HTP-2 hydraulic pump. Up to 8493 pressure measurements can be logged to memory using 7588923 700G/TRACK logging software (available separately).
Approvals
CSA, ATEX

fluke 700g30 1/4 digital pressure gauge 340bar bottom entry, rs232, -0.97bar min. pengukur tekanan entri bawah, -0,97bar weight, force gauges berat, gaya tolok kemasukan bawah 340bar, alat daya fluke/福禄克 数字压力表 底部入口，rs232，-0.97bar 最小值。 重量，力和压力计 福禄克

fluke-700g30-g-1-4-digital-pressure-gauge-340bar-bottom-entry-rs232-0-97bar-min

Fast and accurate digital tyre pressure gauge ideal for all types of motorcycle valves

Angled nozzle helps to reach tyre valves where access is limited

Calibrated in Bar, kPa and PSI, change measuring unit at the push of a button

One hand operation, accurate digital LCD reading

Pressure range: 2–100 PSI (0.15–7.00 Bar)

Operating temperature: 10–30°C (50–86°F)

Pressure range2–100 PSI (0.15–7.00 Bar)Accuracy+1% +0.5 PSIResolution0.5 PSI (0.05 Bar or 5 kPa)Operating temperature10–30°C (50–86°F)Power3V Lithium battery

<ul class="md-block-unordered-list-item"><ul class="md-block-unordered-list-item"><li>Fast and accurate digital tyre pressure gauge ideal for all types of motorcycle valves</li><li>Angled nozzle helps to reach tyre valves where access is limited</li><li>Calibrated in Bar, kPa and PSI, change measuring unit at the push of a button</li><li>One hand operation, accurate digital LCD reading</li><li>Auto Power off for low power consumption</li><li>Pressure range: 2–100 PSI (0.15–7.00 Bar)</li><li>Accuracy: +1% +0.5 PSI</li><li>Resolution: 0.5 PSI (0.05 Bar or 5 kPa)</li><li>Operating temperature: 10–30°C (50–86°F)</li><li>Power: 3V Lithium battery</li></ul><li>Pressure range2–100 PSI (0.15–7.00 Bar)Accuracy+1% +0.5 PSIResolution0.5 PSI (0.05 Bar or 5 kPa)Operating temperature10–30°C (50–86°F)Power3V Lithium battery</li></ul>

&nbsp;
<ul>
<li>Fast and accurate digital tyre pressure gauge ideal for all types of motorcycle valves</li>
<li>Angled nozzle helps to reach tyre valves where access is limited</li>
<li>Calibrated in Bar, kPa and PSI, change measuring unit at the push of a button</li>
<li>One hand operation, accurate digital LCD reading</li>
<li>Auto Power off for low power consumption</li>
<li>Pressure range: 2–100 PSI (0.15–7.00 Bar)</li>
<li>Accuracy: +1% +0.5 PSI</li>
<li>Resolution: 0.5 PSI (0.05 Bar or 5 kPa)</li>
<li>Operating temperature: 10–30°C (50–86°F)</li>
<li>Power: 3V Lithium battery</li>
<ul>
<li>Pressure range2–100 PSI (0.15–7.00 Bar)Accuracy+1% +0.5 PSIResolution0.5 PSI (0.05 Bar or 5 kPa)Operating temperature10–30°C (50–86°F)Power3V Lithium battery</li>
</ul>
</ul>