Keysight

Murr Elektronik

SCHNEIDER ELECTRIC

TE Connectivity

Telemecanique

Electrical Connectors

electrical-connectors

Automotive Connector Accessories

automotive-connector-accessories

Test & Measurement

test-measurement

Electrical Power Testing

electrical-power-testing

Electricals

electricals

Pluggable Function Modules

pluggable-function-modules

Safety Relays

safety-relays

Mechanical Parts

mechanical-parts

V Rings

v-rings

The V-Seal is an all-rubber seal that mounts directly on the shaft and seals axially against counterface, housing, seal case or similar surface. The long flexible lip is designed to act like a mechanical face seal. It can retain lubricants and exclude contaminants. V-Seal can be used as a primary seal or as a secondary back-up seal.

It performs well in dry applications and is capable of handing a greater amount of eccentricity and misalignment than most radial lip type seals.

V-Ring VA 180NBR Material ID 162mm x OD 178mm x Thk 14.5mmThe V-Seal is an all-rubber seal that mounts directly on the shaft and seals axially against counterface, housing, seal case or similar surface. The long flexible lip is designed to act like a mechanical face seal. It can retain lubricants and exclude contaminants. V-Seal can be used as a primary seal or as a secondary back-up seal.It performs well in dry applications and is capable of handing a greater amount of eccentricity and misalignment than most radial lip type seals.Replacement for Forsheda, NAK, SES

V-Ring VA 180
NBR Material&nbsp;
ID 162mm x OD 178mm x Thk 14.5mm
The V-Seal is an all-rubber seal that mounts directly on the shaft and seals axially against counterface, housing, seal case or similar surface. The long flexible lip is designed to act like a mechanical face seal. It can retain lubricants and exclude contaminants. V-Seal can be used as a primary seal or as a secondary back-up seal.
It performs well in dry applications and is capable of handing a greater amount of eccentricity and misalignment than most radial lip type seals.
Replacement for Forsheda, NAK, SES

John

Others

Parker

Optibelt

VITON

SAMTECH

O Ring

Rubber Seals

Oil Seals

Shaft Couplings

Plumbing Tools & Equipment

Ball Bearings

Hydraulic Seals

Wall Plugs, Anchors, Fixings & Kits

Washers

buyerIntroduction

Vring VA 180 Nbr ( Pack of 4pcs )

vring va 180 nbr pack 4pcs (bungkus pcs) rings gelang oem (pek 4pcs) oem/oem代工 nbr（4个装） v形圈 oem代工

vring-va-180-nbr-pack-of-4pcs

4pcs per pack

V-Ring VA 180EPDM Material ID 162mm x OD 178mm x Thk 14.5mmThe V-Seal is an all-rubber seal that mounts directly on the shaft and seals axially against counterface, housing, seal case or similar surface. The long flexible lip is designed to act like a mechanical face seal. It can retain lubricants and exclude contaminants. V-Seal can be used as a primary seal or as a secondary back-up seal.It performs well in dry applications and is capable of handing a greater amount of eccentricity and misalignment than most radial lip type seals.Replacement for Forsheda, NAK, SES

V-Ring VA 180
EPDM Material&nbsp;
ID 162mm x OD 178mm x Thk 14.5mm
The V-Seal is an all-rubber seal that mounts directly on the shaft and seals axially against counterface, housing, seal case or similar surface. The long flexible lip is designed to act like a mechanical face seal. It can retain lubricants and exclude contaminants. V-Seal can be used as a primary seal or as a secondary back-up seal.
It performs well in dry applications and is capable of handing a greater amount of eccentricity and misalignment than most radial lip type seals.
Replacement for Forsheda, NAK, SES

Vring VA 180 Epdm ( Pack of 2pcs )

vring va 180 epdm pack 2pcs (bungkus lembar) rings gelang oem (pek 2pcs) oem/oem代工 epdm（每包2个） v形圈 oem代工

vring-va-180-epdm-pack-of-2pcs

2pcs per pack

Fluoroelastomer products provide excellent high temperature and aggressive fluids resistance for sealing and fluid transport applications in automotive, oil and gas, chemical processing, small engine, and other harsh sealing environments.

Fluorocarbon elastomers are highly fluorinated carbon-based polymers used in applications to resist harsh chemical and ozone attack. The working temperature range is considered to be -26°C to +205°/230°C (-15°F to +400°/440°F). For short working periods it will take even higher temperatures.

V-Ring VA 180FKM Fluoroelastomers MaterialFluoroelastomer products provide excellent high temperature and aggressive fluids resistance for sealing and fluid transport applications in automotive, oil and gas, chemical processing, small engine, and other harsh sealing environments.Fluorocarbon elastomers are highly fluorinated carbon-based polymers used in applications to resist harsh chemical and ozone attack. The working temperature range is considered to be -26°C to +205°/230°C (-15°F to +400°/440°F). For short working periods it will take even higher temperatures.ID 162mm x OD 178mm x Thk 14.5mmThe V-Seal is an all-rubber seal that mounts directly on the shaft and seals axially against counterface, housing, seal case or similar surface. The long flexible lip is designed to act like a mechanical face seal. It can retain lubricants and exclude contaminants. V-Seal can be used as a primary seal or as a secondary back-up seal.It performs well in dry applications and is capable of handing a greater amount of eccentricity and misalignment than most radial lip type seals.Replacement for Forsheda, NAK, SES

V-Ring VA 180
FKM Fluoroelastomers Material
Fluoroelastomer products provide excellent high temperature and aggressive fluids resistance for sealing and fluid transport applications in automotive, oil and gas, chemical processing, small engine, and other harsh sealing environments.
Fluorocarbon elastomers are highly fluorinated carbon-based polymers used in applications to resist harsh chemical and ozone attack. The working temperature range is considered to be -26°C to +205°/230°C (-15°F to +400°/440°F). For short working periods it will take even higher temperatures.
ID 162mm x OD 178mm x Thk 14.5mm
The V-Seal is an all-rubber seal that mounts directly on the shaft and seals axially against counterface, housing, seal case or similar surface. The long flexible lip is designed to act like a mechanical face seal. It can retain lubricants and exclude contaminants. V-Seal can be used as a primary seal or as a secondary back-up seal.
It performs well in dry applications and is capable of handing a greater amount of eccentricity and misalignment than most radial lip type seals.
Replacement for Forsheda, NAK, SES

Vring VA 180 Fkm Fluoroelastomers ( Pack of 2pcs )

vring va 180 fkm fluoroelastomers pack 2pcs fluoroelastomer (pak pcs) rings gelang oem (pek 2pcs) oem/oem代工 fkm含氟弹性体（2个装） v形圈 oem代工

vring-va-180-fkm-fluoroelastomers-pack-of-2pcs

Telemecanique XPSAC3721 Emergency Stop - Module Xpsac

 This XPSAC safety module monitors emergency shutdown pushbuttons and limit switches. It meets the requirements of Performance Level PL e/Category 4 conforming to standard EN/ISO 13849-1 and SILCL3 conforming to EN/IEC 61508 and EN/IEC 62061. It can be used for monitoring emergency stop circuits conforming to standards EN/ISO 13850 and EN/IEC 60204-1. It has additional solid-state output for communication with PLCs about safety status of your process. 

Range of Product: Preventa Safety Automation

Product or Component Type: Preventa Safety Module

Safety Module Application: For emergency stop and switch monitoring

Can reach PL e/Category 4 conforming to EN/ISO 13849-1

Can reach SILCL 3 conforming to EN/IEC 62061

MTTFd = 210.4 years conforming to EN/ISO 13849-1

PFHd = 3.56E-9 1/h conforming to EN/IEC 62061

Captive screw clamp terminals, various configurations, with double bezel

Output Type: Relay instantaneous opening, 3 NO circuit(s), volt-free

Number of Additional Circuits: 1 solid-state output

Rated Supply Voltage ([Us]): 230 V AC - 15...10 %

Output Thermal Current: 6 A per relay for relay output

[Ith] Conventional Free Air Thermal Current: 10.5 A

4 A gG or gL for relay output conforming to EN/IEC 60947-5-1, DIN VDE 0660 part 200

6 A fast blow for relay output conforming to EN/IEC 60947-5-1, DIN VDE 0660 part 200

Minimum Output Current: 10 mA for relay output

Minimum Output Voltage: 16 V for relay output

Maximum Response Time on Input Open: 100 ms

[Ui] Rated Insulation Voltage: 300 V (pollution degree 2) conforming to IEC 60947-5-1 and DIN VDE 0110 part 1

[Uimp] Rated Impulse Withstand Voltage: 4 kV overvoltage category III conforming to IEC 60947-5-1 and DIN VDE 0110 part 1

Current Consumption: 25 mA at 230 V AC on power supply

Mounting Support: 35 mm symmetrical DIN rail

IP20 (terminals) conforming to EN/IEC 60529

IP40 (enclosure) conforming to EN/IEC 60529

Ambient Air Temperature for Operation: -10…55 °C

Ambient Air Temperature for Storage: -25…85 °C

<h3 class="md-block-header-three">Telemecanique XPSAC3721 Emergency Stop - Module Xpsac</h3> This XPSAC safety module monitors emergency shutdown pushbuttons and limit switches. It meets the requirements of Performance Level PL e/Category 4 conforming to standard EN/ISO 13849-1 and SILCL3 conforming to EN/IEC 61508 and EN/IEC 62061. It can be used for monitoring emergency stop circuits conforming to standards EN/ISO 13850 and EN/IEC 60204-1. It has additional solid-state output for communication with PLCs about safety status of your process. Specifications:<ul class="md-block-unordered-list-item"><li>Range of Product: Preventa Safety Automation</li><li>Product or Component Type: Preventa Safety Module</li><li>Safety Module Name: XPSAC</li><li>Safety Module Application: For emergency stop and switch monitoring</li><li>Function of Module:</li><ul class="md-block-unordered-list-item"><li>Emergency stop</li><li>Switch monitoring</li></ul><li>Safety Level:</li><ul class="md-block-unordered-list-item"><li>Can reach PL e/Category 4 conforming to EN/ISO 13849-1</li><li>Can reach SILCL 3 conforming to EN/IEC 62061</li></ul><li>Safety Reliability Data:</li><ul class="md-block-unordered-list-item"><li>MTTFd = 210.4 years conforming to EN/ISO 13849-1</li><li>DC &gt; 99% conforming to EN/ISO 13849-1</li><li>PFHd = 3.56E-9 1/h conforming to EN/IEC 62061</li></ul><li>Type of Start: Unmonitored</li><li>Connections - Terminals:</li><ul class="md-block-unordered-list-item"><li>Captive screw clamp terminals, various configurations, with double bezel</li></ul><li>Output Type: Relay instantaneous opening, 3 NO circuit(s), volt-free</li><li>Number of Additional Circuits: 1 solid-state output</li><li>Rated Supply Voltage ([Us]): 230 V AC - 15...10 %</li><li>Complementary:</li><ul class="md-block-unordered-list-item"><li>Supply Frequency: 50/60 Hz</li><li>Maximum Power Consumption in VA: 6 VA AC</li><li>[Uc] Control Circuit Voltage: 230 V</li><li>Breaking Capacity:</li><ul class="md-block-unordered-list-item"><li>180 VA holding AC-15 C300 relay output</li><li>1800 VA inrush AC-15 C300 relay output</li></ul><li>Output Thermal Current: 6 A per relay for relay output</li><li>[Ith] Conventional Free Air Thermal Current: 10.5 A</li><li>Associated Fuse Rating:</li><ul class="md-block-unordered-list-item"><li>4 A gG or gL for relay output conforming to EN/IEC 60947-5-1, DIN VDE 0660 part 200</li><li>6 A fast blow for relay output conforming to EN/IEC 60947-5-1, DIN VDE 0660 part 200</li></ul><li>Minimum Output Current: 10 mA for relay output</li><li>Minimum Output Voltage: 16 V for relay output</li><li>Maximum Response Time on Input Open: 100 ms</li><li>[Ui] Rated Insulation Voltage: 300 V (pollution degree 2) conforming to IEC 60947-5-1 and DIN VDE 0110 part 1</li><li>[Uimp] Rated Impulse Withstand Voltage: 4 kV overvoltage category III conforming to IEC 60947-5-1 and DIN VDE 0110 part 1</li><li>Local Signalling: 2 LEDs</li><li>Current Consumption: 25 mA at 230 V AC on power supply</li><li>Mounting Support: 35 mm symmetrical DIN rail</li><li>Net Weight: 0.21 kg</li></ul><li>Environment:</li><ul class="md-block-unordered-list-item"><li>Standards:</li><ul class="md-block-unordered-list-item"><li>EN/IEC 60947-5-1</li><li>EN/ISO 13850</li><li>EN 1088/ISO 14119</li><li>EN 60204-1</li></ul><li>Product Certifications: TÜV, UL, CSA</li><li>IP Degree of Protection:</li><ul class="md-block-unordered-list-item"><li>IP20 (terminals) conforming to EN/IEC 60529</li><li>IP40 (enclosure) conforming to EN/IEC 60529</li></ul><li>Ambient Air Temperature for Operation: -10…55 °C</li><li>Ambient Air Temperature for Storage: -25…85 °C</li></ul></ul>

<h3>Telemecanique XPSAC3721 Emergency Stop - Module Xpsac</h3>
&nbsp;This XPSAC safety module monitors emergency shutdown pushbuttons and limit switches. It meets the requirements of Performance Level PL e/Category 4 conforming to standard EN/ISO 13849-1 and SILCL3 conforming to EN/IEC 61508 and EN/IEC 62061. It can be used for monitoring emergency stop circuits conforming to standards EN/ISO 13850 and EN/IEC 60204-1. It has additional solid-state output for communication with PLCs about safety status of your process.&nbsp;
&nbsp;Specifications:
<ul>
<li>Range of Product: Preventa Safety Automation</li>
<li>Product or Component Type: Preventa Safety Module</li>
<li>Safety Module Name: XPSAC</li>
<li>Safety Module Application: For emergency stop and switch monitoring</li>
<li>Function of Module:</li>
<ul>
<li>Emergency stop</li>
<li>Switch monitoring</li>
</ul>
<li>Safety Level:</li>
<ul>
<li>Can reach PL e/Category 4 conforming to EN/ISO 13849-1</li>
<li>Can reach SILCL 3 conforming to EN/IEC 62061</li>
</ul>
<li>Safety Reliability Data:</li>
<ul>
<li>MTTFd = 210.4 years conforming to EN/ISO 13849-1</li>
<li>DC &gt; 99% conforming to EN/ISO 13849-1</li>
<li>PFHd = 3.56E-9 1/h conforming to EN/IEC 62061</li>
</ul>
<li>Type of Start: Unmonitored</li>
<li>Connections - Terminals:</li>
<ul>
<li>Captive screw clamp terminals, various configurations, with double bezel</li>
</ul>
<li>Output Type: Relay instantaneous opening, 3 NO circuit(s), volt-free</li>
<li>Number of Additional Circuits: 1 solid-state output</li>
<li>Rated Supply Voltage ([Us]): 230 V AC - 15...10 %</li>
<li>Complementary:</li>
<ul>
<li>Supply Frequency: 50/60 Hz</li>
<li>Maximum Power Consumption in VA: 6 VA AC</li>
<li>[Uc] Control Circuit Voltage: 230 V</li>
<li>Breaking Capacity:</li>
<ul>
<li>180 VA holding AC-15 C300 relay output</li>
<li>1800 VA inrush AC-15 C300 relay output</li>
</ul>
<li>Output Thermal Current: 6 A per relay for relay output</li>
<li>[Ith] Conventional Free Air Thermal Current: 10.5 A</li>
<li>Associated Fuse Rating:</li>
<ul>
<li>4 A gG or gL for relay output conforming to EN/IEC 60947-5-1, DIN VDE 0660 part 200</li>
<li>6 A fast blow for relay output conforming to EN/IEC 60947-5-1, DIN VDE 0660 part 200</li>
</ul>
<li>Minimum Output Current: 10 mA for relay output</li>
<li>Minimum Output Voltage: 16 V for relay output</li>
<li>Maximum Response Time on Input Open: 100 ms</li>
<li>[Ui] Rated Insulation Voltage: 300 V (pollution degree 2) conforming to IEC 60947-5-1 and DIN VDE 0110 part 1</li>
<li>[Uimp] Rated Impulse Withstand Voltage: 4 kV overvoltage category III conforming to IEC 60947-5-1 and DIN VDE 0110 part 1</li>
<li>Local Signalling: 2 LEDs</li>
<li>Current Consumption: 25 mA at 230 V AC on power supply</li>
<li>Mounting Support: 35 mm symmetrical DIN rail</li>
<li>Net Weight: 0.21 kg</li>
</ul>
<li>Environment:</li>
<ul>
<li>Standards:</li>
<ul>
<li>EN/IEC 60947-5-1</li>
<li>EN/ISO 13850</li>
<li>EN 1088/ISO 14119</li>
<li>EN 60204-1</li>
</ul>
<li>Product Certifications: TÜV, UL, CSA</li>
<li>IP Degree of Protection:</li>
<ul>
<li>IP20 (terminals) conforming to EN/IEC 60529</li>
<li>IP40 (enclosure) conforming to EN/IEC 60529</li>
</ul>
<li>Ambient Air Temperature for Operation: -10…55 °C</li>
<li>Ambient Air Temperature for Storage: -25…85 °C</li>
</ul>
</ul>
&nbsp;

Product Datasheet

Instruction sheet

Catalogue

Environmental disclosure

APC by Schneider Electric

CLIPSAL

Square D

Pilot Lights

Light Switches

Contactors

Miniature Circuit Breakers - MCBs

Uninterruptible Power Supply 

Molded Case Circuit Breakers - MCCBs

EasyPact Circuit Breakers 

Button Switch

Standby battery 

Overload Relays

Schneider

telemecanique xpsac3721 emergency stop module xpsac berhenti darurat modul safety relays hentian kecemasan 紧急停止 模块 泰莱机械公司

telemecanique-xpsac3721-emergency-stop-module-xpsac

Telemecanique XPSAC5121P Emergency Stop - Module Xpsac

 This XPSAC safety module monitors emergency shutdown pushbuttons and limit switches. It meets the requirements of Performance Level PL e/Category 4 conforming to standard EN/ISO 13849-1 and SILCL3 conforming to EN/IEC 61508 and EN/IEC 62061. It can be used for monitoring emergency stop circuits conforming to standards EN/ISO 13850 and EN/IEC 60204-1. 24V AC/DC supply allows direct supply via an auxiliary transformer, like ABT7 or ABL6, allowing saving at installation time. It has removable terminals for easier and better control wires tightening, thus improving installation reliability. It has additional solid-state output for communication with PLCs about safety status of your process.  

Captive screw clamp terminals, removable terminal block, various configurations, with double bezel

<h3 class="md-block-header-three">Telemecanique XPSAC5121P Emergency Stop - Module Xpsac</h3> This XPSAC safety module monitors emergency shutdown pushbuttons and limit switches. It meets the requirements of Performance Level PL e/Category 4 conforming to standard EN/ISO 13849-1 and SILCL3 conforming to EN/IEC 61508 and EN/IEC 62061. It can be used for monitoring emergency stop circuits conforming to standards EN/ISO 13850 and EN/IEC 60204-1. 24V AC/DC supply allows direct supply via an auxiliary transformer, like ABT7 or ABL6, allowing saving at installation time. It has removable terminals for easier and better control wires tightening, thus improving installation reliability. It has additional solid-state output for communication with PLCs about safety status of your process. <ul class="md-block-unordered-list-item"><li>Range of Product: Preventa Safety Automation</li><li>Product or Component Type: Preventa Safety Module</li><li>Safety Module Name: XPSAC</li><li>Safety Module Application: For emergency stop and switch monitoring</li><li>Function of Module:</li><ul class="md-block-unordered-list-item"><li>Switch monitoring</li><li>Emergency stop</li></ul><li>Safety Level:</li><ul class="md-block-unordered-list-item"><li>Can reach PL e/Category 4 conforming to EN/ISO 13849-1</li><li>Can reach SILCL 3 conforming to EN/IEC 62061</li></ul><li>Safety Reliability Data:</li><ul class="md-block-unordered-list-item"><li>MTTFd = 210.4 years conforming to EN/ISO 13849-1</li><li>DC &gt; 99% conforming to EN/ISO 13849-1</li><li>PFHd = 3.56E-9 1/h conforming to EN/IEC 62061</li></ul><li>Type of Start: Unmonitored</li><li>Connections - Terminals:</li><ul class="md-block-unordered-list-item"><li>Captive screw clamp terminals, removable terminal block, various configurations, with double bezel</li></ul><li>Output Type: Relay instantaneous opening, 3 NO circuit(s), volt-free</li><li>Number of Additional Circuits: 1 solid-state output</li><li>Rated Supply Voltage ([Us]):</li><ul class="md-block-unordered-list-item"><li>24 V AC - 20...10 %</li><li>24 V DC - 20...20 %</li></ul><li>Complementary:</li><ul class="md-block-unordered-list-item"><li>Supply Frequency: 50/60 Hz</li><li>Maximum Power Consumption:</li><ul class="md-block-unordered-list-item"><li>1.2 W DC</li><li>2.5 VA AC</li></ul><li>[Uc] Control Circuit Voltage: 24 V</li><li>Breaking Capacity:</li><ul class="md-block-unordered-list-item"><li>180 VA holding AC-15 C300 relay output</li><li>1800 VA inrush AC-15 C300 relay output</li></ul><li>Output Thermal Current: 6 A per relay for relay output</li><li>[Ith] Conventional Free Air Thermal Current: 10.5 A</li><li>Associated Fuse Rating:</li><ul class="md-block-unordered-list-item"><li>4 A gG or gL for relay output conforming to EN/IEC 60947-5-1, DIN VDE 0660 part 200</li><li>6 A fast blow for relay output conforming to EN/IEC 60947-5-1, DIN VDE 0660 part 200</li></ul><li>Minimum Output Current: 10 mA for relay output</li><li>Minimum Output Voltage: 16 V for relay output</li><li>Maximum Response Time on Input Open: 100 ms</li><li>[Ui] Rated Insulation Voltage: 300 V (pollution degree 2) conforming to IEC 60947-5-1 and DIN VDE 0110 part 1</li><li>[Uimp] Rated Impulse Withstand Voltage: 4 kV overvoltage category III conforming to IEC 60947-5-1 and DIN VDE 0110 part 1</li><li>Local Signalling: 2 LEDs</li><li>Current Consumption:</li><ul class="md-block-unordered-list-item"><li>40 mA at 24 V DC on power supply</li><li>90 mA at 24 V AC on power supply</li></ul><li>Mounting Support: 35 mm symmetrical DIN rail</li><li>Net Weight: 0.16 kg</li></ul><li>Environment:</li><ul class="md-block-unordered-list-item"><li>Standards:</li><ul class="md-block-unordered-list-item"><li>EN/ISO 13850</li><li>EN/IEC 60947-5-1</li><li>EN 60204-1</li><li>EN 1088/ISO 14119</li></ul><li>Product Certifications: UL, CSA, TÜV</li><li>IP Degree of Protection:</li><ul class="md-block-unordered-list-item"><li>IP20 (terminals) conforming to EN/IEC 60529</li><li>IP40 (enclosure) conforming to EN/IEC 60529</li></ul><li>Ambient Air Temperature for Operation: -10…55 °C</li><li>Ambient Air Temperature for Storage: -25…85 °C</li></ul></ul>

<h3>Telemecanique XPSAC5121P Emergency Stop - Module Xpsac</h3>
&nbsp;This XPSAC safety module monitors emergency shutdown pushbuttons and limit switches. It meets the requirements of Performance Level PL e/Category 4 conforming to standard EN/ISO 13849-1 and SILCL3 conforming to EN/IEC 61508 and EN/IEC 62061. It can be used for monitoring emergency stop circuits conforming to standards EN/ISO 13850 and EN/IEC 60204-1. 24V AC/DC supply allows direct supply via an auxiliary transformer, like ABT7 or ABL6, allowing saving at installation time. It has removable terminals for easier and better control wires tightening, thus improving installation reliability. It has additional solid-state output for communication with PLCs about safety status of your process.&nbsp;&nbsp;
<ul>
<li>Range of Product: Preventa Safety Automation</li>
<li>Product or Component Type: Preventa Safety Module</li>
<li>Safety Module Name: XPSAC</li>
<li>Safety Module Application: For emergency stop and switch monitoring</li>
<li>Function of Module:</li>
<ul>
<li>Switch monitoring</li>
<li>Emergency stop</li>
</ul>
<li>Safety Level:</li>
<ul>
<li>Can reach PL e/Category 4 conforming to EN/ISO 13849-1</li>
<li>Can reach SILCL 3 conforming to EN/IEC 62061</li>
</ul>
<li>Safety Reliability Data:</li>
<ul>
<li>MTTFd = 210.4 years conforming to EN/ISO 13849-1</li>
<li>DC &gt; 99% conforming to EN/ISO 13849-1</li>
<li>PFHd = 3.56E-9 1/h conforming to EN/IEC 62061</li>
</ul>
<li>Type of Start: Unmonitored</li>
<li>Connections - Terminals:</li>
<ul>
<li>Captive screw clamp terminals, removable terminal block, various configurations, with double bezel</li>
</ul>
<li>Output Type: Relay instantaneous opening, 3 NO circuit(s), volt-free</li>
<li>Number of Additional Circuits: 1 solid-state output</li>
<li>Rated Supply Voltage ([Us]):</li>
<ul>
<li>24 V AC - 20...10 %</li>
<li>24 V DC - 20...20 %</li>
</ul>
<li>Complementary:</li>
<ul>
<li>Supply Frequency: 50/60 Hz</li>
<li>Maximum Power Consumption:</li>
<ul>
<li>1.2 W DC</li>
<li>2.5 VA AC</li>
</ul>
<li>[Uc] Control Circuit Voltage: 24 V</li>
<li>Breaking Capacity:</li>
<ul>
<li>180 VA holding AC-15 C300 relay output</li>
<li>1800 VA inrush AC-15 C300 relay output</li>
</ul>
<li>Output Thermal Current: 6 A per relay for relay output</li>
<li>[Ith] Conventional Free Air Thermal Current: 10.5 A</li>
<li>Associated Fuse Rating:</li>
<ul>
<li>4 A gG or gL for relay output conforming to EN/IEC 60947-5-1, DIN VDE 0660 part 200</li>
<li>6 A fast blow for relay output conforming to EN/IEC 60947-5-1, DIN VDE 0660 part 200</li>
</ul>
<li>Minimum Output Current: 10 mA for relay output</li>
<li>Minimum Output Voltage: 16 V for relay output</li>
<li>Maximum Response Time on Input Open: 100 ms</li>
<li>[Ui] Rated Insulation Voltage: 300 V (pollution degree 2) conforming to IEC 60947-5-1 and DIN VDE 0110 part 1</li>
<li>[Uimp] Rated Impulse Withstand Voltage: 4 kV overvoltage category III conforming to IEC 60947-5-1 and DIN VDE 0110 part 1</li>
<li>Local Signalling: 2 LEDs</li>
<li>Current Consumption:</li>
<ul>
<li>40 mA at 24 V DC on power supply</li>
<li>90 mA at 24 V AC on power supply</li>
</ul>
<li>Mounting Support: 35 mm symmetrical DIN rail</li>
<li>Net Weight: 0.16 kg</li>
</ul>
<li>Environment:</li>
<ul>
<li>Standards:</li>
<ul>
<li>EN/ISO 13850</li>
<li>EN/IEC 60947-5-1</li>
<li>EN 60204-1</li>
<li>EN 1088/ISO 14119</li>
</ul>
<li>Product Certifications: UL, CSA, TÜV</li>
<li>IP Degree of Protection:</li>
<ul>
<li>IP20 (terminals) conforming to EN/IEC 60529</li>
<li>IP40 (enclosure) conforming to EN/IEC 60529</li>
</ul>
<li>Ambient Air Temperature for Operation: -10…55 °C</li>
<li>Ambient Air Temperature for Storage: -25…85 °C</li>
</ul>
</ul>

telemecanique xpsac5121p emergency stop module xpsac berhenti darurat modul safety relays hentian kecemasan 紧急停止 模块 泰莱机械公司

telemecanique-xpsac5121p-emergency-stop-module-xpsac

  Telemecanique XPSAC5121 Emergency Stop - Module Xpsac

This XPSAC safety module monitors emergency shutdown pushbuttons and limit switches. It meets the requirements of Performance Level PL e/Category 4 conforming to standard EN/ISO 13849-1 and SILCL3 conforming to EN/IEC 61508 and EN/IEC 62061. It can be used for monitoring emergency stop circuits conforming to standards EN/ISO 13850 and EN/IEC 60204-1. 24V AC/DC supply allows direct supply via an auxiliary transformer, like ABT7 or ABL6, allowing saving at installation time. It has additional solid-state output for communication with PLCs about safety status of your process. 

Captive screw clamp terminals for various cable types and sizes

300 V (pollution degree 2) conforming to IEC 60947-5-1

300 V (pollution degree 2) conforming to DIN VDE 0110 part 1

4 kV overvoltage category III conforming to IEC 60947-5-1

4 kV overvoltage category III conforming to DIN VDE 0110 part 1

<h3 class="md-block-header-three"> Telemecanique XPSAC5121 Emergency Stop - Module Xpsac</h3>This XPSAC safety module monitors emergency shutdown pushbuttons and limit switches. It meets the requirements of Performance Level PL e/Category 4 conforming to standard EN/ISO 13849-1 and SILCL3 conforming to EN/IEC 61508 and EN/IEC 62061. It can be used for monitoring emergency stop circuits conforming to standards EN/ISO 13850 and EN/IEC 60204-1. 24V AC/DC supply allows direct supply via an auxiliary transformer, like ABT7 or ABL6, allowing saving at installation time. It has additional solid-state output for communication with PLCs about safety status of your process. Specifications:<ul class="md-block-unordered-list-item"><li>Range of Product: Preventa Safety Automation</li><li>Product or Component Type: Preventa Safety Module</li><li>Safety Module Name: XPSAC</li><li>Safety Module Application: For emergency stop and switch monitoring</li><li>Function of Module:</li><ul class="md-block-unordered-list-item"><li>Emergency stop</li><li>Switch monitoring</li></ul><li>Safety Level:</li><ul class="md-block-unordered-list-item"><li>Can reach PL e/Category 4 conforming to EN/ISO 13849-1</li><li>Can reach SILCL 3 conforming to EN/IEC 62061</li></ul><li>Safety Reliability Data:</li><ul class="md-block-unordered-list-item"><li>MTTFd = 210.4 years conforming to EN/ISO 13849-1</li><li>DC &gt; 99% conforming to EN/ISO 13849-1</li><li>PFHd = 3.56E-9 1/h conforming to EN/IEC 62061</li></ul><li>Type of Start: Unmonitored</li><li>Connections - Terminals:</li><ul class="md-block-unordered-list-item"><li>Captive screw clamp terminals for various cable types and sizes</li></ul><li>Output Type: Relay instantaneous opening, 3 NO circuit(s), volt-free</li><li>Number of Additional Circuits: 1 solid-state output</li><li>Rated Supply Voltage ([Us]):</li><ul class="md-block-unordered-list-item"><li>24 V AC - 20...10%</li><li>24 V DC - 20...20%</li></ul><li>Complementary:</li><ul class="md-block-unordered-list-item"><li>Supply Frequency: 50/60 Hz</li><li>Maximum Power Consumption:</li><ul class="md-block-unordered-list-item"><li>1.2 W DC</li><li>2.5 VA AC</li></ul><li>[Uc] Control Circuit Voltage: 24 V</li><li>Breaking Capacity:</li><ul class="md-block-unordered-list-item"><li>180 VA holding AC-15 C300 relay output</li><li>1800 VA inrush AC-15 C300 relay output</li></ul><li>Output Thermal Current: 6 A per relay for relay output</li><li>[Ith] Conventional Free Air Thermal Current: 10.5 A</li><li>Associated Fuse Rating:</li><ul class="md-block-unordered-list-item"><li>4 A gG or gL for relay output conforming to EN/IEC 60947-5-1, DIN VDE 0660 part 200</li><li>6 A fast blow for relay output conforming to EN/IEC 60947-5-1, DIN VDE 0660 part 200</li></ul><li>Minimum Output Current: 10 mA for relay output</li><li>Minimum Output Voltage: 16 V for relay output</li><li>Maximum Response Time on Input Open: 100 ms</li><li>[Ui] Rated Insulation Voltage:</li><ul class="md-block-unordered-list-item"><li>300 V (pollution degree 2) conforming to IEC 60947-5-1</li><li>300 V (pollution degree 2) conforming to DIN VDE 0110 part 1</li></ul><li>[Uimp] Rated Impulse Withstand Voltage:</li><ul class="md-block-unordered-list-item"><li>4 kV overvoltage category III conforming to IEC 60947-5-1</li><li>4 kV overvoltage category III conforming to DIN VDE 0110 part 1</li></ul><li>Local Signalling: 2 LEDs</li><li>Current Consumption:</li><ul class="md-block-unordered-list-item"><li>40 mA at 24 V DC on power supply</li><li>90 mA at 24 V AC on power supply</li></ul><li>Mounting Support: 35 mm symmetrical DIN rail</li><li>Net Weight: 0.16 kg</li></ul><li>Environment:</li><ul class="md-block-unordered-list-item"><li>Standards:</li><ul class="md-block-unordered-list-item"><li>EN/IEC 60947-5-1</li><li>EN/ISO 13850</li><li>EN 60204-1</li><li>EN 1088/ISO 14119</li></ul><li>Product Certifications: UL, CSA, TÜV</li><li>IP Degree of Protection:</li><ul class="md-block-unordered-list-item"><li>IP20 (terminals) conforming to EN/IEC 60529</li><li>IP40 (enclosure) conforming to EN/IEC 60529</li></ul><li>Ambient Air Temperature for Operation: -10…55 °C</li><li>Ambient Air Temperature for Storage: -25…85 °C</li></ul></ul>

<h3> Telemecanique XPSAC5121 Emergency Stop - Module Xpsac</h3>
This XPSAC safety module monitors emergency shutdown pushbuttons and limit switches. It meets the requirements of Performance Level PL e/Category 4 conforming to standard EN/ISO 13849-1 and SILCL3 conforming to EN/IEC 61508 and EN/IEC 62061. It can be used for monitoring emergency stop circuits conforming to standards EN/ISO 13850 and EN/IEC 60204-1. 24V AC/DC supply allows direct supply via an auxiliary transformer, like ABT7 or ABL6, allowing saving at installation time. It has additional solid-state output for communication with PLCs about safety status of your process.&nbsp;
Specifications:
<ul>
<li>Range of Product: Preventa Safety Automation</li>
<li>Product or Component Type: Preventa Safety Module</li>
<li>Safety Module Name: XPSAC</li>
<li>Safety Module Application: For emergency stop and switch monitoring</li>
<li>Function of Module:</li>
<ul>
<li>Emergency stop</li>
<li>Switch monitoring</li>
</ul>
<li>Safety Level:</li>
<ul>
<li>Can reach PL e/Category 4 conforming to EN/ISO 13849-1</li>
<li>Can reach SILCL 3 conforming to EN/IEC 62061</li>
</ul>
<li>Safety Reliability Data:</li>
<ul>
<li>MTTFd = 210.4 years conforming to EN/ISO 13849-1</li>
<li>DC &gt; 99% conforming to EN/ISO 13849-1</li>
<li>PFHd = 3.56E-9 1/h conforming to EN/IEC 62061</li>
</ul>
<li>Type of Start: Unmonitored</li>
<li>Connections - Terminals:</li>
<ul>
<li>Captive screw clamp terminals for various cable types and sizes</li>
</ul>
<li>Output Type: Relay instantaneous opening, 3 NO circuit(s), volt-free</li>
<li>Number of Additional Circuits: 1 solid-state output</li>
<li>Rated Supply Voltage ([Us]):</li>
<ul>
<li>24 V AC - 20...10%</li>
<li>24 V DC - 20...20%</li>
</ul>
<li>Complementary:</li>
<ul>
<li>Supply Frequency: 50/60 Hz</li>
<li>Maximum Power Consumption:</li>
<ul>
<li>1.2 W DC</li>
<li>2.5 VA AC</li>
</ul>
<li>[Uc] Control Circuit Voltage: 24 V</li>
<li>Breaking Capacity:</li>
<ul>
<li>180 VA holding AC-15 C300 relay output</li>
<li>1800 VA inrush AC-15 C300 relay output</li>
</ul>
<li>Output Thermal Current: 6 A per relay for relay output</li>
<li>[Ith] Conventional Free Air Thermal Current: 10.5 A</li>
<li>Associated Fuse Rating:</li>
<ul>
<li>4 A gG or gL for relay output conforming to EN/IEC 60947-5-1, DIN VDE 0660 part 200</li>
<li>6 A fast blow for relay output conforming to EN/IEC 60947-5-1, DIN VDE 0660 part 200</li>
</ul>
<li>Minimum Output Current: 10 mA for relay output</li>
<li>Minimum Output Voltage: 16 V for relay output</li>
<li>Maximum Response Time on Input Open: 100 ms</li>
<li>[Ui] Rated Insulation Voltage:</li>
<ul>
<li>300 V (pollution degree 2) conforming to IEC 60947-5-1</li>
<li>300 V (pollution degree 2) conforming to DIN VDE 0110 part 1</li>
</ul>
<li>[Uimp] Rated Impulse Withstand Voltage:</li>
<ul>
<li>4 kV overvoltage category III conforming to IEC 60947-5-1</li>
<li>4 kV overvoltage category III conforming to DIN VDE 0110 part 1</li>
</ul>
<li>Local Signalling: 2 LEDs</li>
<li>Current Consumption:</li>
<ul>
<li>40 mA at 24 V DC on power supply</li>
<li>90 mA at 24 V AC on power supply</li>
</ul>
<li>Mounting Support: 35 mm symmetrical DIN rail</li>
<li>Net Weight: 0.16 kg</li>
</ul>
<li>Environment:</li>
<ul>
<li>Standards:</li>
<ul>
<li>EN/IEC 60947-5-1</li>
<li>EN/ISO 13850</li>
<li>EN 60204-1</li>
<li>EN 1088/ISO 14119</li>
</ul>
<li>Product Certifications: UL, CSA, TÜV</li>
<li>IP Degree of Protection:</li>
<ul>
<li>IP20 (terminals) conforming to EN/IEC 60529</li>
<li>IP40 (enclosure) conforming to EN/IEC 60529</li>
</ul>
<li>Ambient Air Temperature for Operation: -10…55 °C</li>
<li>Ambient Air Temperature for Storage: -25…85 °C</li>
</ul>
</ul>

Telemecanique XPSAC5121 Emergency Stop - Module Xpsac

telemecanique xpsac5121 emergency stop module xpsac berhenti darurat modul safety relays hentian kecemasan 紧急停止 模块 泰莱机械公司

telemecanique-xpsac5121-emergency-stop-module-xpsac

Schneider Electric XPSCM1144 single-beam photo-electric Sensors - Module XPS-CM

This XPSCM safety module is for monitoring of single-beam photo-electric sensors and has a built-in "muting" function. It meets the requirements of PL c/Category 2 conforming to EN/ISO 13849-1.and SILCL1 conforming to EN/IEC 61508 and EN/IEC 62061. Used in conjunction with XU2S single-beam photo-electric sensors (periodically tested), it establishes a category 2 light curtain conforming to IEC/EN 61496 parts 1 and 2.

Range of Product: Telemecanique Safety Light Curtains XUSL

Safety Module Application: For monitoring of single beam photo-electric sensor

Can reach Category 2 with the appropriate control system and correctly wired conforming to EN/ISO 13849-1

Can reach SILCL 1 with the appropriate control system and correctly wired conforming to EN/IEC 62061

Can reach PL = c with the appropriate control system and correctly wired conforming to EN/ISO 13849-1

MTTFd (Mean Time To Dangerous Failure) = 16.6 years conforming to EN/ISO 13849-1

DC (Diagnostic Coverage) = 95.5% conforming to EN/ISO 13849-1

PFH (Probability of Dangerous Failure per Hour) = 3.12E-7 1/h conforming to EN/IEC 61508

PFHd (Probability of Dangerous Failure per Hour) = 3.12E-7 1/h conforming to EN/IEC 62061

24 V DC (terminals U+, U-) for muting function

Connections - Terminals: Various captive screw clamp terminals for different cable types and configurations

Output Type: Relay 2 NO (Normally Open) (13-14, 23-24), volt-free

Rated Supply Voltage ([Us]): 24 V DC with a tolerance of -20% to +20%

3 s (+/- 20 %) for the activation of the MA/MB muting signal

1.5 A at 24 V (DC-13) time constant: 50 ms for relay output

4 A gG for relay output conforming to DIN VDE 0660 part 200

4 A gG for relay output conforming to EN/IEC 60947-5-1

6 A fast blow for relay output conforming to DIN VDE 0660 part 200

6 A fast blow for relay output conforming to EN/IEC 60947-5-1

1 LED for electronic internal fuse status

1 incandescent lamp for muting power consumption: 4…6.5 W

300 V (pollution degree 2) conforming to DIN VDE 0110 parts 1 and 2

300 V (pollution degree 2) conforming to EN/IEC 60947-5-1

4 kV overvoltage category III conforming to DIN VDE 0110 parts 1 and 2

4 kV overvoltage category III conforming to EN/IEC 60947-5-1

<h3 class="md-block-header-three">Schneider Electric XPSCM1144 single-beam photo-electric Sensors - Module XPS-CM</h3>This XPSCM safety module is for monitoring of single-beam photo-electric sensors and has a built-in &quot;muting&quot; function. It meets the requirements of PL c/Category 2 conforming to EN/ISO 13849-1.and SILCL1 conforming to EN/IEC 61508 and EN/IEC 62061. Used in conjunction with XU2S single-beam photo-electric sensors (periodically tested), it establishes a category 2 light curtain conforming to IEC/EN 61496 parts 1 and 2.Main<ul class="md-block-unordered-list-item"><li>Range of Product: Telemecanique Safety Light Curtains XUSL</li><li>Product or Component Type: Safety Module</li><li>Safety Module Name: XPSCM</li><li>Safety Module Application: For monitoring of single beam photo-electric sensor</li><li>Function of Module: Built-in muting</li><li>Safety Level:</li><ul class="md-block-unordered-list-item"><li>Can reach Category 2 with the appropriate control system and correctly wired conforming to EN/ISO 13849-1</li><li>Can reach SILCL 1 with the appropriate control system and correctly wired conforming to EN/IEC 62061</li><li>Can reach PL = c with the appropriate control system and correctly wired conforming to EN/ISO 13849-1</li></ul><li>Safety Reliability Data:</li><ul class="md-block-unordered-list-item"><li>MTTFd (Mean Time To Dangerous Failure) = 16.6 years conforming to EN/ISO 13849-1</li><li>DC (Diagnostic Coverage) = 95.5% conforming to EN/ISO 13849-1</li><li>PFH (Probability of Dangerous Failure per Hour) = 3.12E-7 1/h conforming to EN/IEC 61508</li><li>PFHd (Probability of Dangerous Failure per Hour) = 3.12E-7 1/h conforming to EN/IEC 62061</li></ul><li>Number of Inputs:</li><ul class="md-block-unordered-list-item"><li>2 (terminals MA, MB) for muting function</li><li>4 (terminals Z1, Z2, Z3, Z4) for sensor</li></ul><li>Input Voltage:</li><ul class="md-block-unordered-list-item"><li>24 V DC for sensor</li><li>24 V DC (terminals U+, U-) for muting function</li></ul><li>Input Compatibility:</li><ul class="md-block-unordered-list-item"><li>XC limit switch for muting function</li><li>XU2M18PP340... for muting function</li><li>XU2S18PP340... (infrared) for sensor</li><li>XU9M18PP340... for muting function</li></ul><li>Connections - Terminals: Various captive screw clamp terminals for different cable types and configurations</li><li>Output Type: Relay 2 NO (Normally Open) (13-14, 23-24), volt-free</li><li>Number of Additional Circuits: 0</li><li>Rated Supply Voltage ([Us]): 24 V DC with a tolerance of -20% to +20%</li></ul>Complimentary<ul class="md-block-unordered-list-item"><li>Sensor Power Supply:</li><ul class="md-block-unordered-list-item"><li>U+, U-: 24 V DC</li></ul><li>Maximum Supply Current for Sensors:</li><ul class="md-block-unordered-list-item"><li>200 mA</li></ul><li>Input Current:</li><ul class="md-block-unordered-list-item"><li>200 mA for muting function</li></ul><li>Synchronization Time Between Inputs:</li><ul class="md-block-unordered-list-item"><li>3 s (+/- 20 %) for the activation of the MA/MB muting signal</li></ul><li>Muting Maximum Duration:</li><ul class="md-block-unordered-list-item"><li>60 s (-10...30 %)</li></ul><li>Maximum Line Resistance:</li><ul class="md-block-unordered-list-item"><li>10 Ohm for sensor power supply</li></ul><li>Breaking Capacity:</li><ul class="md-block-unordered-list-item"><li>180 VA holding AC-15 C300 relay output</li><li>1800 VA inrush AC-15 C300 relay output</li><li>20 mA at 24 V for solid-state output</li><li>1.5 A at 24 V (DC-13) time constant: 50 ms for relay output</li></ul><li>Associated Fuse Rating:</li><ul class="md-block-unordered-list-item"><li>4 A gG for relay output conforming to DIN VDE 0660 part 200</li><li>4 A gG for relay output conforming to EN/IEC 60947-5-1</li><li>6 A fast blow for relay output conforming to DIN VDE 0660 part 200</li><li>6 A fast blow for relay output conforming to EN/IEC 60947-5-1</li></ul><li>Minimum Output Current:</li><ul class="md-block-unordered-list-item"><li>10 mA for relay output</li></ul><li>Minimum Output Voltage:</li><ul class="md-block-unordered-list-item"><li>17 V for relay output</li></ul><li>Maximum Response Time on Input Open:</li><ul class="md-block-unordered-list-item"><li>25 ms</li></ul><li>Local Signaling:</li><ul class="md-block-unordered-list-item"><li>1 LED for electronic internal fuse status</li><li>1 LED for restarting function</li><li>1 LED for safety outputs closed function</li><li>1 LED for safety outputs open function</li><li>1 incandescent lamp for muting power consumption: 4…6.5 W</li></ul><li>Output Thermal Current:</li><ul class="md-block-unordered-list-item"><li>5.6 A per relay</li><li>11 A maximum</li></ul><li>Maximum Power Consumption in W:</li><ul class="md-block-unordered-list-item"><li>15 W</li></ul><li>Protection Type:</li><ul class="md-block-unordered-list-item"><li>Electronic internal fuse</li></ul><li>[Ui] Rated Insulation Voltage:</li><ul class="md-block-unordered-list-item"><li>300 V (pollution degree 2) conforming to DIN VDE 0110 parts 1 and 2</li><li>300 V (pollution degree 2) conforming to EN/IEC 60947-5-1</li></ul><li>[Uimp] Rated Impulse Withstand Voltage:</li><ul class="md-block-unordered-list-item"><li>4 kV overvoltage category III conforming to DIN VDE 0110 parts 1 and 2</li><li>4 kV overvoltage category III conforming to EN/IEC 60947-5-1</li></ul></ul>Environment<ul class="md-block-unordered-list-item"><li>Ambient Air Temperature:</li><ul class="md-block-unordered-list-item"><li>For Operation: -10…55 °C</li><li>For Storage: -25…85 °C</li></ul><li>IP Degree of Protection:</li><ul class="md-block-unordered-list-item"><li>IP20 (terminals) conforming to IEC 60529</li><li>IP40 (enclosure) conforming to IEC 60529</li></ul></ul>

<h3>Schneider Electric XPSCM1144 single-beam photo-electric Sensors - Module XPS-CM</h3>
This XPSCM safety module is for monitoring of single-beam photo-electric sensors and has a built-in "muting" function. It meets the requirements of PL c/Category 2 conforming to EN/ISO 13849-1.and SILCL1 conforming to EN/IEC 61508 and EN/IEC 62061. Used in conjunction with XU2S single-beam photo-electric sensors (periodically tested), it establishes a category 2 light curtain conforming to IEC/EN 61496 parts 1 and 2.
Main
<ul>
<li>Range of Product: Telemecanique Safety Light Curtains XUSL</li>
<li>Product or Component Type: Safety Module</li>
<li>Safety Module Name: XPSCM</li>
<li>Safety Module Application: For monitoring of single beam photo-electric sensor</li>
<li>Function of Module: Built-in muting</li>
<li>Safety Level:</li>
<ul>
<li>Can reach Category 2 with the appropriate control system and correctly wired conforming to EN/ISO 13849-1</li>
<li>Can reach SILCL 1 with the appropriate control system and correctly wired conforming to EN/IEC 62061</li>
<li>Can reach PL = c with the appropriate control system and correctly wired conforming to EN/ISO 13849-1</li>
</ul>
<li>Safety Reliability Data:</li>
<ul>
<li>MTTFd (Mean Time To Dangerous Failure) = 16.6 years conforming to EN/ISO 13849-1</li>
<li>DC (Diagnostic Coverage) = 95.5% conforming to EN/ISO 13849-1</li>
<li>PFH (Probability of Dangerous Failure per Hour) = 3.12E-7 1/h conforming to EN/IEC 61508</li>
<li>PFHd (Probability of Dangerous Failure per Hour) = 3.12E-7 1/h conforming to EN/IEC 62061</li>
</ul>
<li>Number of Inputs:</li>
<ul>
<li>2 (terminals MA, MB) for muting function</li>
<li>4 (terminals Z1, Z2, Z3, Z4) for sensor</li>
</ul>
<li>Input Voltage:</li>
<ul>
<li>24 V DC for sensor</li>
<li>24 V DC (terminals U+, U-) for muting function</li>
</ul>
<li>Input Compatibility:</li>
<ul>
<li>XC limit switch for muting function</li>
<li>XU2M18PP340... for muting function</li>
<li>XU2S18PP340... (infrared) for sensor</li>
<li>XU9M18PP340... for muting function</li>
</ul>
<li>Connections - Terminals: Various captive screw clamp terminals for different cable types and configurations</li>
<li>Output Type: Relay 2 NO (Normally Open) (13-14, 23-24), volt-free</li>
<li>Number of Additional Circuits: 0</li>
<li>Rated Supply Voltage ([Us]): 24 V DC with a tolerance of -20% to +20%</li>
</ul>
Complimentary
<ul>
<li>Sensor Power Supply:</li>
<ul>
<li>U+, U-: 24 V DC</li>
</ul>
<li>Maximum Supply Current for Sensors:</li>
<ul>
<li>200 mA</li>
</ul>
<li>Input Current:</li>
<ul>
<li>200 mA for muting function</li>
</ul>
<li>Synchronization Time Between Inputs:</li>
<ul>
<li>3 s (+/- 20 %) for the activation of the MA/MB muting signal</li>
</ul>
<li>Muting Maximum Duration:</li>
<ul>
<li>60 s (-10...30 %)</li>
</ul>
<li>Maximum Line Resistance:</li>
<ul>
<li>10 Ohm for sensor power supply</li>
</ul>
<li>Breaking Capacity:</li>
<ul>
<li>180 VA holding AC-15 C300 relay output</li>
<li>1800 VA inrush AC-15 C300 relay output</li>
<li>20 mA at 24 V for solid-state output</li>
<li>1.5 A at 24 V (DC-13) time constant: 50 ms for relay output</li>
</ul>
<li>Associated Fuse Rating:</li>
<ul>
<li>4 A gG for relay output conforming to DIN VDE 0660 part 200</li>
<li>4 A gG for relay output conforming to EN/IEC 60947-5-1</li>
<li>6 A fast blow for relay output conforming to DIN VDE 0660 part 200</li>
<li>6 A fast blow for relay output conforming to EN/IEC 60947-5-1</li>
</ul>
<li>Minimum Output Current:</li>
<ul>
<li>10 mA for relay output</li>
</ul>
<li>Minimum Output Voltage:</li>
<ul>
<li>17 V for relay output</li>
</ul>
<li>Maximum Response Time on Input Open:</li>
<ul>
<li>25 ms</li>
</ul>
<li>Local Signaling:</li>
<ul>
<li>1 LED for electronic internal fuse status</li>
<li>1 LED for restarting function</li>
<li>1 LED for safety outputs closed function</li>
<li>1 LED for safety outputs open function</li>
<li>1 incandescent lamp for muting power consumption: 4…6.5 W</li>
</ul>
<li>Output Thermal Current:</li>
<ul>
<li>5.6 A per relay</li>
<li>11 A maximum</li>
</ul>
<li>Maximum Power Consumption in W:</li>
<ul>
<li>15 W</li>
</ul>
<li>Protection Type:</li>
<ul>
<li>Electronic internal fuse</li>
</ul>
<li>[Ui] Rated Insulation Voltage:</li>
<ul>
<li>300 V (pollution degree 2) conforming to DIN VDE 0110 parts 1 and 2</li>
<li>300 V (pollution degree 2) conforming to EN/IEC 60947-5-1</li>
</ul>
<li>[Uimp] Rated Impulse Withstand Voltage:</li>
<ul>
<li>4 kV overvoltage category III conforming to DIN VDE 0110 parts 1 and 2</li>
<li>4 kV overvoltage category III conforming to EN/IEC 60947-5-1</li>
</ul>
</ul>
Environment
<ul>
<li>Ambient Air Temperature:</li>
<ul>
<li>For Operation: -10…55 °C</li>
<li>For Storage: -25…85 °C</li>
</ul>
<li>IP Degree of Protection:</li>
<ul>
<li>IP20 (terminals) conforming to IEC 60529</li>
<li>IP40 (enclosure) conforming to IEC 60529</li>
</ul>
</ul>
&nbsp; 
&nbsp;

Circuit Breaker

Motor Protection Circuit Breakers

TV, Telephone & Internet Sockets

schneider electric xpscm1144 single-beam photo-electric sensors module xps-cm sensor fotolistrik sinar tunggal modul safety relays penderia foto-elektrik pancaran electric/施耐德电气 单光束光电传感器 模块 施耐德电气

schneider-electric-xpscm1144-single-beam-photo-electric-sensors-module-xps-cm

Murr 3000-16013-3100020 Miro 6.2 Pluggable Compl.module Output Relay 

Utilization category AC-12 (EN IEC 60947-5-1):

Utilization category AC-15 (EN IEC 60947-5-1):

Utilization category DC-13 (EN IEC 60947-5-1):

Degree of protection (EN IEC 60529): IP20

Material contact: Ag Sn O₂ (Silver Tin Oxide)

Suitable for mounting type: Mounting rail (EN 60715)

<h3 class="md-block-header-three">Murr 3000-16013-3100020 Miro 6.2 Pluggable Compl.module Output Relay </h3><h3 class="md-block-header-three">Electrical Data | Input</h3><ul class="md-block-unordered-list-item"><li>Input voltage AC: 24 V</li><ul class="md-block-unordered-list-item"><li>Min: 19.2 V</li><li>Max: 28.8 V</li></ul><li>Input voltage DC: 24 V</li><ul class="md-block-unordered-list-item"><li>Min: 19.2 V</li><li>Max: 28.8 V</li></ul><li>Input current: 12 mA</li></ul><h3 class="md-block-header-three">Electrical Data | Output</h3><ul class="md-block-unordered-list-item"><li>Utilization category AC-12 (EN IEC 60947-5-1):</li><ul class="md-block-unordered-list-item"><li>6 A @ 24 V</li><li>6 A @ 110 V</li><li>6 A @ 230 V</li></ul><li>Utilization category AC-15 (EN IEC 60947-5-1):</li><ul class="md-block-unordered-list-item"><li>3 A @ 24 V</li><li>3 A @ 110 V</li><li>1.5 A @ 230 V</li></ul><li>Utilization category DC-13 (EN IEC 60947-5-1):</li><ul class="md-block-unordered-list-item"><li>1 A @ 24 V</li><li>0.2 A @ 110 V</li><li>0.1 A @ 230 V</li></ul><li>Switching frequency max.: 10 Hz</li><li>Power rating AC max.: 1500 VA</li><li>Power rating DC max.: 180 W</li><li>Switching voltage AC max.: 250 V</li><li>Switching voltage DC max.: 30 V</li><li>Switching current DC: 100 mA</li><li>Switching current max.: 6 A</li></ul><h3 class="md-block-header-three">Diagnostics</h3><ul class="md-block-unordered-list-item"><li>Status indication LED: Green</li></ul><h3 class="md-block-header-three">Device Protection</h3><ul class="md-block-unordered-list-item"><li>Condition lifetime: Load-dependent</li><li>Degree of protection (EN IEC 60529): IP20</li><li>Rated insulation voltage: 250 V</li><li>Electrical lifetime NC: 10,000 Cycles</li><li>Electrical lifetime NO: 30,000 Cycles</li><li>Mechanical endurance: 10,000,000 Cycles</li></ul><h3 class="md-block-header-three">Mechanical Data</h3><ul class="md-block-unordered-list-item"><li>Drop-out time max.: 4 ms</li><li>Response time max.: 8 ms</li><li>Material contact: Ag Sn O₂ (Silver Tin Oxide)</li></ul><h3 class="md-block-header-three">Mounting Data</h3><ul class="md-block-unordered-list-item"><li>Mounting method: Snap-on</li><li>Suitable for mounting type: Mounting rail (EN 60715)</li><li>Height: 93 mm</li><li>Width: 6.2 mm</li><li>Depth: 75.6 mm</li></ul><h3 class="md-block-header-three">Environmental Characteristics | Climatic</h3><ul class="md-block-unordered-list-item"><li>Operating temperature min.: -25 °C</li><li>Operating temperature max.: 60 °C</li></ul>

<h3>Murr 3000-16013-3100020 Miro 6.2 Pluggable Compl.module Output Relay&nbsp;</h3>
<h3>Electrical Data | Input</h3>
<ul>
<li>Input voltage AC: 24 V</li>
<ul>
<li>Min: 19.2 V</li>
<li>Max: 28.8 V</li>
</ul>
<li>Input voltage DC: 24 V</li>
<ul>
<li>Min: 19.2 V</li>
<li>Max: 28.8 V</li>
</ul>
<li>Input current: 12 mA</li>
</ul>
<h3>Electrical Data | Output</h3>
<ul>
<li>Utilization category AC-12 (EN IEC 60947-5-1):</li>
<ul>
<li>6 A @ 24 V</li>
<li>6 A @ 110 V</li>
<li>6 A @ 230 V</li>
</ul>
<li>Utilization category AC-15 (EN IEC 60947-5-1):</li>
<ul>
<li>3 A @ 24 V</li>
<li>3 A @ 110 V</li>
<li>1.5 A @ 230 V</li>
</ul>
<li>Utilization category DC-13 (EN IEC 60947-5-1):</li>
<ul>
<li>1 A @ 24 V</li>
<li>0.2 A @ 110 V</li>
<li>0.1 A @ 230 V</li>
</ul>
<li>Switching frequency max.: 10 Hz</li>
<li>Power rating AC max.: 1500 VA</li>
<li>Power rating DC max.: 180 W</li>
<li>Switching voltage AC max.: 250 V</li>
<li>Switching voltage DC max.: 30 V</li>
<li>Switching current DC: 100 mA</li>
<li>Switching current max.: 6 A</li>
</ul>
<h3>Diagnostics</h3>
<ul>
<li>Status indication LED: Green</li>
</ul>
<h3>Device Protection</h3>
<ul>
<li>Condition lifetime: Load-dependent</li>
<li>Degree of protection (EN IEC 60529): IP20</li>
<li>Rated insulation voltage: 250 V</li>
<li>Electrical lifetime NC: 10,000 Cycles</li>
<li>Electrical lifetime NO: 30,000 Cycles</li>
<li>Mechanical endurance: 10,000,000 Cycles</li>
</ul>
<h3>Mechanical Data</h3>
<ul>
<li>Drop-out time max.: 4 ms</li>
<li>Response time max.: 8 ms</li>
<li>Material contact: Ag Sn O₂ (Silver Tin Oxide)</li>
</ul>
<h3>Mounting Data</h3>
<ul>
<li>Mounting method: Snap-on</li>
<li>Suitable for mounting type: Mounting rail (EN 60715)</li>
<li>Height: 93 mm</li>
<li>Width: 6.2 mm</li>
<li>Depth: 75.6 mm</li>
</ul>
<h3>Environmental Characteristics | Climatic</h3>
<ul>
<li>Operating temperature min.: -25 °C</li>
<li>Operating temperature max.: 60 °C</li>
</ul>

Murr Asia-Pacific Pte. Ltd

Murr Elektronik 3000-16013-3100020 Miro 6.2 Pluggable Compl.module Output Relay

murr elektronik 3000-16013-3100020 miro 6.2 pluggable compl.module output relay relai keluaran modul komplek yang dapat dipasang function modules geganti compl. elektronik/穆尔电子 可插拔复合模块输出继电器 穆尔电子

murr-elektronik-3000-16013-3100020-miro-6-2-pluggable-compl-module-output-relay

V-Ring VA200NBR Material ID 180mm x OD 210mm x Thk 25mmThe V-Seal is an all-rubber seal that mounts directly on the shaft and seals axially against counterface, housing, seal case or similar surface. The long flexible lip is designed to act like a mechanical face seal. It can retain lubricants and exclude contaminants. V-Seal can be used as a primary seal or as a secondary back-up seal.It performs well in dry applications and is capable of handing a greater amount of eccentricity and misalignment than most radial lip type seals.Replacement for Forsheda, NAK, SES

V-Ring VA200
NBR Material&nbsp;
ID 180mm x OD 210mm x Thk 25mm
The V-Seal is an all-rubber seal that mounts directly on the shaft and seals axially against counterface, housing, seal case or similar surface. The long flexible lip is designed to act like a mechanical face seal. It can retain lubricants and exclude contaminants. V-Seal can be used as a primary seal or as a secondary back-up seal.
It performs well in dry applications and is capable of handing a greater amount of eccentricity and misalignment than most radial lip type seals.
Replacement for Forsheda, NAK, SES

Vring VA200 Nbr ( Pack of 2pcs )

vring va200 nbr pack 2pcs (bungkus lembar) rings gelang oem (pek 2pcs) oem/oem代工 nbr（2个装） v形圈 oem代工

vring-va200-nbr-pack-of-2pcs

MULTICOMP PRO

Analog Devices

MULTICOMP

WIHA

Pro Power

Duratool

Tenma

Hakko

TR Fastenings

Surface Mount Resistors

Multilayer Ceramic Capacitors

DC-DC Converters

Through Hole Resistors

Operational Amplifiers

Analogue to Digital Converters

Transceiver

Digital to Analogue Converters

Development Boards

Junction & Enclosure Box

Element14

Te Connectivity 2203956-1. Backshell, 180DEG, PA66, Black

te connectivity 2203956-1. backshell, 180deg, pa66, black konektivitas cangkang belakang, hitam automotive connector accessories kesambungan kulit connectivity/te 连接 后壳，180°，pa66，黑色