Iwata

RS Pro

Laboratory Consumable & Apparatus

laboratory-consumable-apparatus

Laboratory Funnels

laboratory-funnels

Mechanical Parts

mechanical-parts

O Ring Cords 

o-ring-cords

Fasteners

fasteners

Washers

washers

Shim Ring, Inner Diameter 3mm X Outer Diameter 9mm, Pack of 10 (Available in Brass, Carbon Steel and 304 Stainless Steel)

Shim Rings, also known as Shim Washers, are available in various thickness to align gaps and uneven surfaces. Shim washers look similar to flat washers, but are different in their usage and purpose.

Produced in Japan, these are made to extremely precise tolerances and are free from burrs. We are able to offer shim washers in different materials such as Brass, Carbon Steel (SPCC) and 304 stainless steel.

Use them for screws, axles, bearing faces and machine bases. Depending on the material, thickness variants range from 0.01mm to 1mm. Each package contains 10 pcs of the same thickness in the above given inner diameter and outer diameter sizes.

Shim washers and flat washers are inherently different in their purpose and tolerances. Here are three differences that set shim washers apart from flat washers.

They serve a different purpose in life. While flat washers are used for fastening, load distribution and surface protection, shim washers are used for gap alignment. Flat washers are usually used together with screws, bolts or nuts. While shim washers can be used in the same way, they can be slotted into threaded screws or axles to carry out their job.

Based on DIN125A standard, flat washers are produced with nominal dimensions with no tolerance values given. Our flat washers are supplied with the understanding that the thickness variance will range from 0 to 0.2mm. For example, an M3 flat washer will have thickness ranging from 0.4mm to 0.6mm, even in the same batch!

Shim washers are produced to close tolerances, usually up to 0.2mm for ID and OD, and as small as +/-0.02mm for thickness. 

In short, shim washers are more precise than flat washers because they have to be. During gap alignment or leveling, minor differences in thickness and diameters must be taken into account for fear of misalignment. 

Flat washers usually have a single thickness based on a given ID and OD. For example, an M3 flat washer with ID 3.2mm and OD 6mm will have thickness 0.4mm. If you are lucky (or not), you might find some with 0.5mm in the same batch. Not reassuring? Not to worry, being used for fastening, the thickness of flat washers is usually not a focal point.

Product Description: Shim Ring (Also known as Shim Washer)

Manufacturer: Iwata Manufacturing Co., Ltd

Materials: Carbon Steel (SPCC), Brass and 304 Stainless Steel

<h3 class="md-block-header-three">Shim Ring, Inner Diameter 3mm X Outer Diameter 9mm, Pack of 10 (Available in Brass, Carbon Steel and 304 Stainless Steel)</h3>Shim Rings, also known as Shim Washers, are available in various thickness to align gaps and uneven surfaces. Shim washers look similar to flat washers, but are different in their usage and purpose.Produced in Japan, these are made to extremely precise tolerances and are free from burrs. We are able to offer shim washers in different materials such as Brass, Carbon Steel (SPCC) and 304 stainless steel.Use them for screws, axles, bearing faces and machine bases. Depending on the material, thickness variants range from 0.01mm to 1mm. Each package contains 10 pcs of the same thickness in the above given inner diameter and outer diameter sizes.Shim washers and flat washers are inherently different in their purpose and tolerances. Here are three differences that set shim washers apart from flat washers.Purpose And UsageThey serve a different purpose in life. While flat washers are used for fastening, load distribution and surface protection, shim washers are used for gap alignment. Flat washers are usually used together with screws, bolts or nuts. While shim washers can be used in the same way, they can be slotted into threaded screws or axles to carry out their job.TolerancesBased on DIN125A standard, flat washers are produced with nominal dimensions with no tolerance values given. Our flat washers are supplied with the understanding that the thickness variance will range from 0 to 0.2mm. For example, an M3 flat washer will have thickness ranging from 0.4mm to 0.6mm, even in the same batch!Shim washers are produced to close tolerances, usually up to 0.2mm for ID and OD, and as small as +/-0.02mm for thickness. In short, shim washers are more precise than flat washers because they have to be. During gap alignment or leveling, minor differences in thickness and diameters must be taken into account for fear of misalignment. Available ThicknessFlat washers usually have a single thickness based on a given ID and OD. For example, an M3 flat washer with ID 3.2mm and OD 6mm will have thickness 0.4mm. If you are lucky (or not), you might find some with 0.5mm in the same batch. Not reassuring? Not to worry, being used for fastening, the thickness of flat washers is usually not a focal point.Product Description: Shim Ring (Also known as Shim Washer)Manufacturer: Iwata Manufacturing Co., LtdMaterials: Carbon Steel (SPCC), Brass and 304 Stainless SteelID: 3mmOD: 9mmThickness: 0.01mm to 1mm.Quantity Per Package: 10 pcsCountry of Origin: Japan

<h3>Shim Ring, Inner Diameter 3mm X Outer Diameter 9mm, Pack of 10 (Available in Brass, Carbon Steel and 304 Stainless Steel)</h3>
Shim Rings, also known as Shim Washers, are available in various thickness to align gaps and uneven surfaces. Shim washers look similar to flat washers, but are different in their usage and purpose.
Produced in Japan, these are made to extremely precise tolerances and are free from burrs. We are able to offer shim washers in different materials such as Brass, Carbon Steel (SPCC) and 304 stainless steel.
Use them for screws, axles, bearing faces and machine bases. Depending on the material, thickness variants range from 0.01mm to 1mm. Each package contains 10 pcs of the same thickness in the above given inner diameter and outer diameter sizes.
Shim washers and flat washers are inherently different in their purpose and tolerances. Here are three differences that set shim washers apart from flat washers.
Purpose And Usage
They serve a different purpose in life. While flat washers are used for fastening, load distribution and surface protection, shim washers are used for gap alignment. Flat washers are usually used together with screws, bolts or nuts. While shim washers can be used in the same way, they can be slotted into threaded screws or axles to carry out their job.
Tolerances
Based on DIN125A standard, flat washers are produced with nominal dimensions with no tolerance values given. Our flat washers are supplied with the understanding that the thickness variance will range from 0 to 0.2mm. For example, an M3 flat washer will have thickness ranging from 0.4mm to 0.6mm, even in the same batch!
Shim washers are produced to close tolerances, usually up to 0.2mm for ID and OD, and as small as +/-0.02mm for thickness. 
In short, shim washers are more precise than flat washers because they have to be. During gap alignment or leveling, minor differences in thickness and diameters must be taken into account for fear of misalignment. 
Available Thickness
Flat washers usually have a single thickness based on a given ID and OD. For example, an M3 flat washer with ID 3.2mm and OD 6mm will have thickness 0.4mm. If you are lucky (or not), you might find some with 0.5mm in the same batch. Not reassuring? Not to worry, being used for fastening, the thickness of flat washers is usually not a focal point.
Product Description: Shim Ring (Also known as Shim Washer)
Manufacturer: Iwata Manufacturing Co., Ltd
Materials: Carbon Steel (SPCC), Brass and 304 Stainless Steel
ID: 3mm
OD: 9mm
Thickness: 0.01mm to 1mm.
Quantity Per Package: 10 pcs
Country of Origin: Japan

Precision Brand

Ergomat

Southco

Others

DYMON

SCRUBS

IT Accessories

Machinery Accessories

Screw

Ball Bearings

Painting Tools

Hooks & Eyes

Drill Bits & Drill Bit Sets

Rubber Seals

Other Tools

Hose Clamp

Leland

buyerIntroduction

Iwata Shim Ring, Inner Diameter 3mm X Outer Diameter 9mm, Pack of 10

iwata shim ring, inner diameter 3mm outer 9mm, pack 10 cincin iwata, dalam luar kemasan buah washers pek iwata/岩田 垫片环，内径 外径 9mm，10 个一包 岩田

iwata-shim-ring-inner-diameter-3mm-x-outer-diameter-9mm-pack-of-10

Carbon Steel ID 3mm x OD 9mm x 0.10mm PN RF003009010, Pack of 10 Pieces

Carbon Steel ID 3mm x OD 9mm x 0.15mm PN RF003009015, Pack of 10 Pieces

Carbon Steel ID 3mm x OD 9mm x 0.20mm PN RF003009020, Pack of 10 Pieces

Carbon Steel ID 3mm x OD 9mm x 0.30mm PN RF003009030, Pack of 10 Pieces

Carbon Steel ID 3mm x OD 9mm x 0.50mm PN RF003009050, Pack of 10 Pieces

Carbon Steel ID 3mm x OD 9mm x 1mm PN RF003009100, Pack of 10 Pieces

Brass ID 3mm x OD 9mm x 0.05mm PN RB003009005, Pack of 10 Pieces

Brass ID 3mm x OD 9mm x 0.10mm PN RB003009010, Pack of 10 Pieces

Brass ID 3mm x OD 9mm x 0.15mm PN RB003009015, Pack of 10 Pieces

Brass ID 3mm x OD 9mm x 0.20mm PN RB003009020, Pack of 10 Pieces

Brass ID 3mm x OD 9mm x 0.30mm PN RB003009030, Pack of 10 Pieces

Brass ID 3mm x OD 9mm x 0.50mm PN RB003009050, Pack of 10 Pieces

Brass ID 3mm x OD 9mm x 1mm PN RB003009100, Pack of 10 Pieces

304 SST ID 3mm x OD 9mm x 0.01mm PN RS003009001, Pack of 10 Pieces

304 SST ID 3mm x OD 9mm x 0.02mm PN RS003009002, Pack of 10 Pieces

304 SST ID 3mm x OD 9mm x 0.03mm PN RS003009003, Pack of 10 Pieces

304 SST ID 3mm x OD 9mm x 0.05mm PN RS003009005, Pack of 10 Pieces

304 SST ID 3mm x OD 9mm x 0.10mm PN RS003009010, Pack of 10 Pieces

304 SST ID 3mm x OD 9mm x 0.15mm PN RS003009015, Pack of 10 Pieces

304 SST ID 3mm x OD 9mm x 0.20mm PN RS003009020, Pack of 10 Pieces

304 SST ID 3mm x OD 9mm x 0.30mm PN RS003009030, Pack of 10 Pieces

304 SST ID 3mm x OD 9mm x 0.50mm PN RS003009050, Pack of 10 Pieces

304 SST ID 3mm x OD 9mm x 1mm PN RS003009100, Pack of 10 Pieces

Material

Shim Ring, Inner Diameter 5mm X Outer Diameter 9mm, Pack of 10 (Available in Brass, Carbon Steel and 304 Stainless Steel)

<h3 class="md-block-header-three">Shim Ring, Inner Diameter 5mm X Outer Diameter 9mm, Pack of 10 (Available in Brass, Carbon Steel and 304 Stainless Steel)</h3>Shim Rings, also known as Shim Washers, are available in various thickness to align gaps and uneven surfaces. Shim washers look similar to flat washers, but are different in their usage and purpose.Produced in Japan, these are made to extremely precise tolerances and are free from burrs. We are able to offer shim washers in different materials such as Brass, Carbon Steel (SPCC) and 304 stainless steel.Use them for screws, axles, bearing faces and machine bases. Depending on the material, thickness variants range from 0.01mm to 1mm. Each package contains 10 pcs of the same thickness in the above given inner diameter and outer diameter sizes.Shim washers and flat washers are inherently different in their purpose and tolerances. Here are three differences that set shim washers apart from flat washers.Purpose And UsageThey serve a different purpose in life. While flat washers are used for fastening, load distribution and surface protection, shim washers are used for gap alignment. Flat washers are usually used together with screws, bolts or nuts. While shim washers can be used in the same way, they can be slotted into threaded screws or axles to carry out their job.TolerancesBased on DIN125A standard, flat washers are produced with nominal dimensions with no tolerance values given. Our flat washers are supplied with the understanding that the thickness variance will range from 0 to 0.2mm. For example, an M3 flat washer will have thickness ranging from 0.4mm to 0.6mm, even in the same batch!Shim washers are produced to close tolerances, usually up to 0.2mm for ID and OD, and as small as +/-0.02mm for thickness. In short, shim washers are more precise than flat washers because they have to be. During gap alignment or leveling, minor differences in thickness and diameters must be taken into account for fear of misalignment. Available ThicknessFlat washers usually have a single thickness based on a given ID and OD. For example, an M3 flat washer with ID 3.2mm and OD 6mm will have thickness 0.4mm. If you are lucky (or not), you might find some with 0.5mm in the same batch. Not reassuring? Not to worry, being used for fastening, the thickness of flat washers is usually not a focal point.Product Description: Shim Ring (Also known as Shim Washer)Manufacturer: Iwata Manufacturing Co., LtdMaterials: Carbon Steel (SPCC), Brass and 304 Stainless SteelID: 5mmOD: 9mmThickness: 0.01mm to 1mm.Quantity Per Package: 10 pcsCountry of Origin: Japan

<h3>Shim Ring, Inner Diameter 5mm X Outer Diameter 9mm, Pack of 10 (Available in Brass, Carbon Steel and 304 Stainless Steel)</h3>
Shim Rings, also known as Shim Washers, are available in various thickness to align gaps and uneven surfaces. Shim washers look similar to flat washers, but are different in their usage and purpose.
Produced in Japan, these are made to extremely precise tolerances and are free from burrs. We are able to offer shim washers in different materials such as Brass, Carbon Steel (SPCC) and 304 stainless steel.
Use them for screws, axles, bearing faces and machine bases. Depending on the material, thickness variants range from 0.01mm to 1mm. Each package contains 10 pcs of the same thickness in the above given inner diameter and outer diameter sizes.
Shim washers and flat washers are inherently different in their purpose and tolerances. Here are three differences that set shim washers apart from flat washers.
Purpose And Usage
They serve a different purpose in life. While flat washers are used for fastening, load distribution and surface protection, shim washers are used for gap alignment. Flat washers are usually used together with screws, bolts or nuts. While shim washers can be used in the same way, they can be slotted into threaded screws or axles to carry out their job.
Tolerances
Based on DIN125A standard, flat washers are produced with nominal dimensions with no tolerance values given. Our flat washers are supplied with the understanding that the thickness variance will range from 0 to 0.2mm. For example, an M3 flat washer will have thickness ranging from 0.4mm to 0.6mm, even in the same batch!
Shim washers are produced to close tolerances, usually up to 0.2mm for ID and OD, and as small as +/-0.02mm for thickness. 
In short, shim washers are more precise than flat washers because they have to be. During gap alignment or leveling, minor differences in thickness and diameters must be taken into account for fear of misalignment. 
Available Thickness
Flat washers usually have a single thickness based on a given ID and OD. For example, an M3 flat washer with ID 3.2mm and OD 6mm will have thickness 0.4mm. If you are lucky (or not), you might find some with 0.5mm in the same batch. Not reassuring? Not to worry, being used for fastening, the thickness of flat washers is usually not a focal point.
Product Description: Shim Ring (Also known as Shim Washer)
Manufacturer: Iwata Manufacturing Co., Ltd
Materials: Carbon Steel (SPCC), Brass and 304 Stainless Steel
ID: 5mm
OD: 9mm
Thickness: 0.01mm to 1mm.
Quantity Per Package: 10 pcs
Country of Origin: Japan

Iwata Shim Ring, Inner Diameter 5mm X Outer Diameter 9mm, Pack of 10

iwata shim ring, inner diameter 5mm outer 9mm, pack 10 cincin iwata, dalam luar kemasan washers pek iwata/岩田 垫片环，内径 外径 9mm，10 个一包 岩田

iwata-shim-ring-inner-diameter-5mm-x-outer-diameter-9mm-pack-of-10

Carbon Steel ID 5mm x OD 9mm x 0.10mm PN RF005009010, Pack of 10 Pieces

Carbon Steel ID 5mm x OD 9mm x 0.15mm PN RF005009015, Pack of 10 Pieces

Carbon Steel ID 5mm x OD 9mm x 0.20mm PN RF005009020, Pack of 10 Pieces

Carbon Steel ID 5mm x OD 9mm x 0.30mm PN RF005009030, Pack of 10 Pieces

Carbon Steel ID 5mm x OD 9mm x 0.50mm PN RF005009050, Pack of 10 Pieces

Carbon Steel ID 5mm x OD 9mm x 1mm PN RF005009100, Pack of 10 Pieces

Brass ID 5mm x OD 9mm x 0.05mm PN RB005009005, Pack of 10 Pieces

Brass ID 5mm x OD 9mm x 0.10mm PN RB005009010, Pack of 10 Pieces

Brass ID 5mm x OD 9mm x 0.15mm PN RB005009015, Pack of 10 Pieces

Brass ID 5mm x OD 9mm x 0.20mm PN RB005009020, Pack of 10 Pieces

Brass ID 5mm x OD 9mm x 0.30mm PN RB005009030, Pack of 10 Pieces

Brass ID 5mm x OD 9mm x 0.50mm PN RB005009050, Pack of 10 Pieces

Brass ID 5mm x OD 9mm x 1mm PN RB005009100, Pack of 10 Pieces

304 SST ID 5mm x OD 9mm x 0.01mm PN RS005009001, Pack of 10 Pieces

304 SST ID 5mm x OD 9mm x 0.02mm PN RS005009002, Pack of 10 Pieces

304 SST ID 5mm x OD 9mm x 0.03mm PN RS005009003, Pack of 10 Pieces

304 SST ID 5mm x OD 9mm x 0.05mm PN RS005009005, Pack of 10 Pieces

304 SST ID 5mm x OD 9mm x 0.10mm PN RS005009010, Pack of 10 Pieces

304 SST ID 5mm x OD 9mm x 0.15mm PN RS005009015, Pack of 10 Pieces

304 SST ID 5mm x OD 9mm x 0.20mm PN RS005009020, Pack of 10 Pieces

304 SST ID 5mm x OD 9mm x 0.30mm PN RS005009030, Pack of 10 Pieces

304 SST ID 5mm x OD 9mm x 0.50mm PN RS005009050, Pack of 10 Pieces

304 SST ID 5mm x OD 9mm x 1mm PN RS005009100, Pack of 10 Pieces

Shim Ring, Inner Diameter 4mm X Outer Diameter 9mm, Pack of 10 (Available in Brass, Carbon Steel and 304 Stainless Steel)

<h3 class="md-block-header-three">Shim Ring, Inner Diameter 4mm X Outer Diameter 9mm, Pack of 10 (Available in Brass, Carbon Steel and 304 Stainless Steel)</h3>Shim Rings, also known as Shim Washers, are available in various thickness to align gaps and uneven surfaces. Shim washers look similar to flat washers, but are different in their usage and purpose.Produced in Japan, these are made to extremely precise tolerances and are free from burrs. We are able to offer shim washers in different materials such as Brass, Carbon Steel (SPCC) and 304 stainless steel.Use them for screws, axles, bearing faces and machine bases. Depending on the material, thickness variants range from 0.01mm to 1mm. Each package contains 10 pcs of the same thickness in the above given inner diameter and outer diameter sizes.Shim washers and flat washers are inherently different in their purpose and tolerances. Here are three differences that set shim washers apart from flat washers.Purpose And UsageThey serve a different purpose in life. While flat washers are used for fastening, load distribution and surface protection, shim washers are used for gap alignment. Flat washers are usually used together with screws, bolts or nuts. While shim washers can be used in the same way, they can be slotted into threaded screws or axles to carry out their job.TolerancesBased on DIN125A standard, flat washers are produced with nominal dimensions with no tolerance values given. Our flat washers are supplied with the understanding that the thickness variance will range from 0 to 0.2mm. For example, an M3 flat washer will have thickness ranging from 0.4mm to 0.6mm, even in the same batch!Shim washers are produced to close tolerances, usually up to 0.2mm for ID and OD, and as small as +/-0.02mm for thickness. In short, shim washers are more precise than flat washers because they have to be. During gap alignment or leveling, minor differences in thickness and diameters must be taken into account for fear of misalignment. Available ThicknessFlat washers usually have a single thickness based on a given ID and OD. For example, an M3 flat washer with ID 3.2mm and OD 6mm will have thickness 0.4mm. If you are lucky (or not), you might find some with 0.5mm in the same batch. Not reassuring? Not to worry, being used for fastening, the thickness of flat washers is usually not a focal point.Product Description: Shim Ring (Also known as Shim Washer)Manufacturer: Iwata Manufacturing Co., LtdMaterials: Carbon Steel (SPCC), Brass and 304 Stainless SteelID: 4mmOD: 9mmThickness: 0.01mm to 1mm.Quantity Per Package: 10 pcsCountry of Origin: Japan

<h3>Shim Ring, Inner Diameter 4mm X Outer Diameter 9mm, Pack of 10 (Available in Brass, Carbon Steel and 304 Stainless Steel)</h3>
Shim Rings, also known as Shim Washers, are available in various thickness to align gaps and uneven surfaces. Shim washers look similar to flat washers, but are different in their usage and purpose.
Produced in Japan, these are made to extremely precise tolerances and are free from burrs. We are able to offer shim washers in different materials such as Brass, Carbon Steel (SPCC) and 304 stainless steel.
Use them for screws, axles, bearing faces and machine bases. Depending on the material, thickness variants range from 0.01mm to 1mm. Each package contains 10 pcs of the same thickness in the above given inner diameter and outer diameter sizes.
Shim washers and flat washers are inherently different in their purpose and tolerances. Here are three differences that set shim washers apart from flat washers.
Purpose And Usage
They serve a different purpose in life. While flat washers are used for fastening, load distribution and surface protection, shim washers are used for gap alignment. Flat washers are usually used together with screws, bolts or nuts. While shim washers can be used in the same way, they can be slotted into threaded screws or axles to carry out their job.
Tolerances
Based on DIN125A standard, flat washers are produced with nominal dimensions with no tolerance values given. Our flat washers are supplied with the understanding that the thickness variance will range from 0 to 0.2mm. For example, an M3 flat washer will have thickness ranging from 0.4mm to 0.6mm, even in the same batch!
Shim washers are produced to close tolerances, usually up to 0.2mm for ID and OD, and as small as +/-0.02mm for thickness. 
In short, shim washers are more precise than flat washers because they have to be. During gap alignment or leveling, minor differences in thickness and diameters must be taken into account for fear of misalignment. 
Available Thickness
Flat washers usually have a single thickness based on a given ID and OD. For example, an M3 flat washer with ID 3.2mm and OD 6mm will have thickness 0.4mm. If you are lucky (or not), you might find some with 0.5mm in the same batch. Not reassuring? Not to worry, being used for fastening, the thickness of flat washers is usually not a focal point.
Product Description: Shim Ring (Also known as Shim Washer)
Manufacturer: Iwata Manufacturing Co., Ltd
Materials: Carbon Steel (SPCC), Brass and 304 Stainless Steel
ID: 4mm
OD: 9mm
Thickness: 0.01mm to 1mm.
Quantity Per Package: 10 pcs
Country of Origin: Japan

Iwata Shim Ring, Inner Diameter 4mm X Outer Diameter 9mm, Pack of 10

iwata shim ring, inner diameter 4mm outer 9mm, pack 10 cincin iwata, dalam luar kemasan washers pek iwata/岩田 垫片环，内径 外径 9mm，10 个一包 岩田

iwata-shim-ring-inner-diameter-4mm-x-outer-diameter-9mm-pack-of-10

Carbon Steel ID 4mm x OD 9mm x 0.10mm PN RF004009010, Pack of 10 Pieces

Carbon Steel ID 4mm x OD 9mm x 0.15mm PN RF004009015, Pack of 10 Pieces

Carbon Steel ID 4mm x OD 9mm x 0.20mm PN RF004009020, Pack of 10 Pieces

Carbon Steel ID 4mm x OD 9mm x 0.30mm PN RF004009030, Pack of 10 Pieces

Carbon Steel ID 4mm x OD 9mm x 0.50mm PN RF004009050, Pack of 10 Pieces

Carbon Steel ID 4mm x OD 9mm x 1mm PN RF004009100, Pack of 10 Pieces

Brass ID 4mm x OD 9mm x 0.05mm PN RB004009005, Pack of 10 Pieces

Brass ID 4mm x OD 9mm x 0.10mm PN RB004009010, Pack of 10 Pieces

Brass ID 4mm x OD 9mm x 0.15mm PN RB004009015, Pack of 10 Pieces

Brass ID 4mm x OD 9mm x 0.20mm PN RB004009020, Pack of 10 Pieces

Brass ID 4mm x OD 9mm x 0.30mm PN RB004009030, Pack of 10 Pieces

Brass ID 4mm x OD 9mm x 0.50mm PN RB004009050, Pack of 10 Pieces

Brass ID 4mm x OD 9mm x 1mm PN RB004009100, Pack of 10 Pieces

304 SST ID 4mm x OD 9mm x 0.01mm PN RS004009001, Pack of 10 Pieces

304 SST ID 4mm x OD 9mm x 0.02mm PN RS004009002, Pack of 10 Pieces

304 SST ID 4mm x OD 9mm x 0.03mm PN RS004009003, Pack of 10 Pieces

304 SST ID 4mm x OD 9mm x 0.05mm PN RS004009005, Pack of 10 Pieces

304 SST ID 4mm x OD 9mm x 0.10mm PN RS004009010, Pack of 10 Pieces

304 SST ID 4mm x OD 9mm x 0.15mm PN RS004009015, Pack of 10 Pieces

304 SST ID 4mm x OD 9mm x 0.20mm PN RS004009020, Pack of 10 Pieces

304 SST ID 4mm x OD 9mm x 0.30mm PN RS004009030, Pack of 10 Pieces

304 SST ID 4mm x OD 9mm x 0.50mm PN RS004009050, Pack of 10 Pieces

304 SST ID 4mm x OD 9mm x 1mm PN RS004009100, Pack of 10 Pieces

Siemens

STANLEY

ECLIPSE TOOLS

Contitech

Facom

PEGLER YORKSHIRE

MEAN WELL

Omron

O Ring

Plugs & Connector 

Surface Mount Resistors

Bolts

Panel Mount Indicators 

Button Switch

Electrical Wire 

Aluminium Capacitors

Air Filters

RS Components ETH SG

Rs Pro 2341992 Nitrile O-Ring Cord, 9mm Diameter, 5m Length

rs pro 2341992 nitrile o-ring cord, 9mm diameter, 5m length kabel nitril 2341992, diameter 9mm, panjang ring cords kord cincin nitril, 丁腈橡胶 形圈线，直径 9mm，长度 rs专业版

rs-pro-2341992-nitrile-o-ring-cord-9mm-diameter-5m-length

Rs Pro 2309687 Fkm O-Ring Cord, 9mm Diameter, 2m Length

rs pro 2309687 fkm o-ring cord, 9mm diameter, 2m length kabel fkm, diameter 9mm, panjang ring cords kord cincin 形环线，直径 9mm，长度 rs专业版

rs-pro-2309687-fkm-o-ring-cord-9mm-diameter-2m-length

RS PRO Datasheet

DEUTSCH

RAPID

SCHNEIDER ELECTRIC

Junction & Enclosure Box

Rs Pro 2012423 Pp Funnel, With 50mm Funnel Diameter, 9mm Stem Diameter

rs pro 2012423 pp funnel, 50mm funnel diameter, 9mm stem diameter corong pp, dengan 50mm, batang laboratory funnels laboratorium corong, makmal 漏斗，漏斗直径 50mm，杆直径 实验室漏斗 rs专业版

rs-pro-2012423-pp-funnel-with-50mm-funnel-diameter-9mm-stem-diameter