ALCHEM

Ecodora

FLUKE

KLENCO

Electricals

electricals

Contactors

contactors

Test & Measurement

test-measurement

Industrial Thermometer

industrial-thermometer

Adhesive

adhesive

Leak Repair

leak-repair

Pumps

pumps

Lubricant Pumps

lubricant-pumps

Maintenance & Care

maintenance-care

Polishing Liquids

polishing-liquids

Ecodora 0E91C/71, Integral industrial pump s. 900, R 7:1 - 30 l/min, with PU seals and suction tube 940 mm

Ratio: 7:1
Flow rate: 30 l/min
Compatible fluids: oils, lubricants and
similar
Suction tube upper body: aluminum
Suction tube: carbon steel
Air inlet connection: G 1/2" (f)
Fluid outlet connection: G 3/4" (f)
Max supply pressure: 8 bar
Max air consumption: 8 bar 1,6 m³/min
Noise level: 80 dB
Suitable for drums or tank: suitable for drums 180÷220 kg
Packing: No. 1 - 0,070 m³
Weight: 13 kg
  

<h3 class="md-block-header-three">Ecodora 0E91C/71, Integral industrial pump s. 900, R 7:1 - 30 l/min, with PU seals and suction tube 940 mm</h3>Ratio: 7:1 Flow rate: 30 l/min Compatible fluids: oils, lubricants and similar Suction tube upper body: aluminum Suction tube: carbon steel Air inlet connection: G 1/2&quot; (f) Fluid outlet connection: G 3/4&quot; (f) Max supply pressure: 8 bar Max air consumption: 8 bar 1,6 m³/min Noise level: 80 dB Suitable for drums or tank: suitable for drums 180÷220 kg Packing: No. 1 - 0,070 m³ Weight: 13 kg

<h3>Ecodora 0E91C/71, Integral industrial pump s. 900, R 7:1 - 30 l/min, with PU seals and suction tube 940 mm</h3>
Ratio: 7:1 
Flow rate: 30 l/min 
Compatible fluids: oils, lubricants and 
similar 
Suction tube upper body: aluminum 
Suction tube: carbon steel 
Air inlet connection: G 1/2" (f) 
Fluid outlet connection: G 3/4" (f) 
Max supply pressure: 8 bar 
Max air consumption: 8 bar 1,6 m³/min 
Noise level: 80 dB 
Suitable for drums or tank: suitable for drums 180÷220 kg 
Packing: No. 1 - 0,070 m³ 
Weight: 13 kg 
&nbsp;&nbsp;

Ecodora 0E91C/71, Integral industrial pump s. 900, R 7:1 - 30 l/min, with PU seals and suction tube 940 mm Technical Specifications

Toshio

BEKO

Atlas Copco

Hydraulic Tools

Other Tools

Pumps Accessories

Other Fittings

buyerIntroduction

Ecodora 0E91C/71, Integral Industrial Pump S. 900, R 7:1 - 30 l/min, With Pu Seals and Suction Tube 940 Mm

ecodora 0e91c/71, integral industrial pump s. 900, 7:1 30 l/min, pu seals suction tube 940mm pompa industri l/mnt, dengan segel dan tabung hisap lubricant pumps pelicin pam perindustrian bersepadu pengedap tiub sedutan pelincir ecodora/生态多拉 0e91c/71，一体式工业泵 900，r l/min，带 密封件和吸入管 毫米 生态多拉

ecodora-0e91c-71-integral-industrial-pump-s-900-r-7-1-30-l-min-with-pu-seals-and-suction-tube-940-mm

AIR-OPERATED PUMPS FOR DISTRIBUTION GREASE 

Ecodora 0E90C/111, Modular Integral Industrial Pump S.900. R11:1 - 30 L/min, with PU Seals

For More Information: Please Refer to the Datasheet    
  
  
  

<h3 class="md-block-header-three">AIR-OPERATED PUMPS FOR DISTRIBUTION GREASE </h3>Ecodora 0E90C/111, Modular Integral Industrial Pump S.900. R11:1 - 30 L/min, with PU SealsFor More Information: Please Refer to the Datasheet

<h3>AIR-OPERATED PUMPS FOR DISTRIBUTION GREASE </h3>
Ecodora 0E90C/111, Modular Integral Industrial Pump S.900. R11:1 - 30 L/min, with PU Seals
For More Information: Please Refer to the Datasheet 
 
 
&nbsp;&nbsp;

Ecodora 0E90C/111, Modular Integral Industrial Pump S.900. R11:1 - 30 L/min, With Pu Seals

ecodora 0e90c/111, modular integral industrial pump s.900. r11:1 30 l/min, pu seals pompa industri l/mnt, dengan segel lubricant pumps pelicin pam pengedap pelincir ecodora/生态多拉 0e90c/111，模块化整体工业泵 s.900。 l/min，带 密封件 生态多拉

ecodora-0e90c-111-modular-integral-industrial-pump-s-900-r11-1-30-l-min-with-pu-seals

Fluke 572-2 Infrared Thermometer, -30°C Min, +1652 °f, +900°C Max, ±1 % Accuracy, °c and °f Measurements

Absolute Maximum Temperature Measurement	+1652 °F, +900°C

Absolute Minimum Temperature Measurement	-30°C

 For accurate, high temperature and high distance to spot measurements, Fluke's 572-2 is a straight forward and easy to use non-contact laser thermometer.

Quickly adjust emissivity and navigate to start data logging with just a few push buttons. Ideal applications include, metal refining, smelting, cement, petrochemical, power utility and much more. Designed to be tough, it has a rugged exterior and ergonomic design, it can also withstand the harshest of environments. Compatible with standard mini-connector K-type thermocouples the 572-2 quickly becomes a multi-tool for contact and non-contact measurement.

• -30 °C to 900 °C (-22 °F to 1652 °F) temperature range
• 60:1 distance to spot ratio
• Multi-language interface
• MAX, MIN, DIF and AVG displays
• 96 x 96 pixels display (Back-lit)
• High/Low Alarm
• Data storage, USB 2.0 cable
• FlukeView® Forms documenting software 

<h3 class="md-block-header-three">Fluke 572-2 Infrared Thermometer, -30°C Min, +1652 °f, +900°C Max, ±1 % Accuracy, °c and °f Measurements</h3><ul class="md-block-unordered-list-item"><li>Absolute Maximum Temperature Measurement	+1652 °F, +900°C</li><li>Temperature Scale	Centigrade, Fahrenheit</li><li>Absolute Minimum Temperature Measurement	-30°C</li><li>Best Accuracy	±1 %</li><li>Distance to Spot Ratio	60:1</li><li>Emissivity	0.1 → 1, Adjustable</li><li>Model Number p	572</li><li>Data Storage	Yes</li><li>Response Time	500 ms</li><li>Length	163.6mm</li><li>Width	51.8mm</li><li>Height	176.9mm</li><li>Weight	322g</li></ul> For accurate, high temperature and high distance to spot measurements, Fluke&#x27;s 572-2 is a straight forward and easy to use non-contact laser thermometer.Quickly adjust emissivity and navigate to start data logging with just a few push buttons. Ideal applications include, metal refining, smelting, cement, petrochemical, power utility and much more. Designed to be tough, it has a rugged exterior and ergonomic design, it can also withstand the harshest of environments. Compatible with standard mini-connector K-type thermocouples the 572-2 quickly becomes a multi-tool for contact and non-contact measurement.Features and Benefits:• -30 °C to 900 °C (-22 °F to 1652 °F) temperature range • 60:1 distance to spot ratio • Multi-language interface • MAX, MIN, DIF and AVG displays • 96 x 96 pixels display (Back-lit) • High/Low Alarm • Data storage, USB 2.0 cable • FlukeView® Forms documenting software

<h3>Fluke 572-2 Infrared Thermometer, -30°C Min, +1652 °f, +900°C Max, ±1 % Accuracy, °c and °f Measurements</h3>
<ul>
<li>Absolute Maximum Temperature Measurement	+1652 °F, +900°C</li>
<li>Temperature Scale	Centigrade, Fahrenheit</li>
<li>Absolute Minimum Temperature Measurement	-30°C</li>
<li>Best Accuracy	±1 %</li>
<li>Distance to Spot Ratio	60:1</li>
<li>Emissivity	0.1 → 1, Adjustable</li>
<li>Model Number p	572</li>
<li>Data Storage	Yes</li>
<li>Response Time	500 ms</li>
<li>Length	163.6mm</li>
<li>Width	51.8mm</li>
<li>Height	176.9mm</li>
<li>Weight	322g</li>
</ul>
&nbsp;For accurate, high temperature and high distance to spot measurements, Fluke's 572-2 is a straight forward and easy to use non-contact laser thermometer.
Quickly adjust emissivity and navigate to start data logging with just a few push buttons. Ideal applications include, metal refining, smelting, cement, petrochemical, power utility and much more. Designed to be tough, it has a rugged exterior and ergonomic design, it can also withstand the harshest of environments. Compatible with standard mini-connector K-type thermocouples the 572-2 quickly becomes a multi-tool for contact and non-contact measurement.
Features and Benefits:
• -30 °C to 900 °C (-22 °F to 1652 °F) temperature range 
• 60:1 distance to spot ratio 
• Multi-language interface 
• MAX, MIN, DIF and AVG displays 
• 96 x 96 pixels display (Back-lit) 
• High/Low Alarm 
• Data storage, USB 2.0 cable 
• FlukeView® Forms documenting software&nbsp;

572-2 Infrared Thermometer

Users Manual 572-2 Infrared Thermometer

RS Pro

SCHNEIDER ELECTRIC

Fluke Networks

Abus

Screw

O Ring

Surface Mount Resistors

Circular Connectors

Bolts

Panel Mount Indicators 

Molded Case Circuit Breakers - MCCBs

Junction & Enclosure Box

Electrical Wire 

RS Components ETH SG

fluke 572-2 infrared thermometer, -30°c min, +1652 °f, +900°c max, ±1 accuracy, °c °f measurements termometer inframerah 572-2, min -30°c, maks +900°c, akurasi %, pengukuran dan industrial thermometer maks, ketepatan, fluke/福禄克 红外测温仪，最低 -30°c，最高 °f，最大 +900°c，精度 ±1%，°c 测量 福禄克

fluke-572-2-infrared-thermometer-30-c-min-1652-f-900-c-max-1-accuracy-c-and-f-measurements

Abb AX09-30-10-80 Contactor 3P 2.2KW 3NO 1AUX 50/60HZ 230-240VAC

Standards:IEC/EN 60947-1, IEC/EN 60947-4-1, UL 60947-4-1, CSA C22.2 No. 60947-4-1

Rated Operational Voltage:Auxiliary Circuit 690 V

Rated Frequency (f):Auxiliary Circuit 50 / 60 Hz

Conventional Free-air Thermal Current (Ith):acc. to IEC 60947-4-1, Open Contactors Θ = 40 °C 35 A

Rated Operational Current AC-1 (Ie):(690 V) 40 °C 25 A

Rated Operational Current AC-3 (Ie):(415 V) 60 °C 9 A

Rated Operational Current AC-3e (Ie):(415 V) 60 °C 9 A

Rated Operational Power AC-3 (Pe):(400 V) 4 kW

Rated Operational Power AC-3e (Pe):(415 V) 4 kW

Rated Operational Current AC-15 (Ie):(500 V) 2 A

Rated Short-time Withstand Current Low Voltage (Icw):at 40 °C Ambient Temp, in Free Air, from a Cold State 10 s 150 A

at 40 °C Ambient Temp, in Free Air, from a Cold State 15 min 35 A

at 40 °C Ambient Temp, in Free Air, from a Cold State 1 min 60 A

at 40 °C Ambient Temp, in Free Air, from a Cold State 1 s 300 A

at 40 °C Ambient Temp, in Free Air, from a Cold State 30 s 80 A

Maximum Breaking Capacity:cos phi=0.45 (cos phi=0.35 for Ie > 100 A) at 440 V 250 A

cos phi=0.45 (cos phi=0.35 for Ie > 100 A) at 690 V 106 A

Maximum Electrical Switching Frequency:(AC-1) 600 cycles per hour

Rated Operational Current DC-1 (Ie):(110 V) 1-Pole, 40 °C 10 A

Rated Operational Current DC-3 (Ie):(110 V) 1-Pole, 40 °C 6 A

<h3 class="md-block-header-three">Abb AX09-30-10-80 Contactor 3P 2.2KW 3NO 1AUX 50/60HZ 230-240VAC</h3> <ul class="md-block-unordered-list-item"><li>Product Net Width:45 mm</li><li>Product Net Depth / Length:77 mm</li><li>Product Net Height:86 mm</li><li>Product Net Weight:0.27 kg</li><li>Number of Main Contacts NO:3</li><li>Number of Main Contacts NC:0</li><li>Number of Auxiliary Contacts NO:1</li><li>Number of Auxiliary Contacts NC:0</li><li>Standards:IEC/EN 60947-1, IEC/EN 60947-4-1, UL 60947-4-1, CSA C22.2 No. 60947-4-1</li><li>Rated Operational Voltage:Auxiliary Circuit 690 V</li><li>Main Circuit 690 V</li><li>Rated Frequency (f):Auxiliary Circuit 50 / 60 Hz</li><li>Control Circuit 50 / 60 Hz</li><li>Main Circuit 50 / 60 Hz</li><li>Conventional Free-air Thermal Current (Ith):acc. to IEC 60947-4-1, Open Contactors Θ = 40 °C 35 A</li><li>acc. to IEC 60947-5-1, Θ = 40 °C 16 A</li><li>Rated Operational Current AC-1 (Ie):(690 V) 40 °C 25 A</li><li>(690 V) 60 °C 25 A</li><li>(690 V) 70 °C 22 A</li><li>Rated Operational Current AC-3 (Ie):(415 V) 60 °C 9 A</li><li>(440 V) 60 °C 9 A</li><li>(500 V) 60 °C 9.5 A</li><li>(690 V) 60 °C 7 A</li><li>(380 / 400 V) 60 °C 9 A</li><li>(220 / 230 / 240 V) 60 °C 9 A</li><li>Rated Operational Current AC-3e (Ie):(415 V) 60 °C 9 A</li><li>(440 V) 60 °C 9 A</li><li>(500 V) 60 °C 9.5 A</li><li>(690 V) 60 °C 7 A</li><li>(380 / 400 V) 60 °C 9 A</li><li>(220 / 230 / 240 V) 60 °C 9 A</li><li>Rated Operational Power AC-3 (Pe):(400 V) 4 kW</li><li>(415 V) 4 kW</li><li>(440 V) 4 kW</li><li>(500 V) 5.5 kW</li><li>(690 V) 5.5 kW</li><li>(380 / 400 V) 4 kW</li><li>(220 / 230 / 240 V) 2.2 kW</li><li>Rated Operational Power AC-3e (Pe):(415 V) 4 kW</li><li>(440 V) 4 kW</li><li>(500 V) 5.5 kW</li><li>(690 V) 5.5 kW</li><li>(380 / 400 V) 4 kW</li><li>(220 / 230 / 240 V) 2.2 kW</li><li>Rated Operational Current AC-15 (Ie):(500 V) 2 A</li><li>(690 V) 2 A</li><li>(24 / 127 V) 6 A</li><li>(220 / 240 V) 4 A</li><li>(400 / 440 V) 3 A</li><li>Rated Short-time Withstand Current Low Voltage (Icw):at 40 °C Ambient Temp, in Free Air, from a Cold State 10 s 150 A</li><li>at 40 °C Ambient Temp, in Free Air, from a Cold State 15 min 35 A</li><li>at 40 °C Ambient Temp, in Free Air, from a Cold State 1 min 60 A</li><li>at 40 °C Ambient Temp, in Free Air, from a Cold State 1 s 300 A</li><li>at 40 °C Ambient Temp, in Free Air, from a Cold State 30 s 80 A</li><li>for 0.1 s 140 A</li><li>for 1 s 100 A</li><li>Maximum Breaking Capacity:cos phi=0.45 (cos phi=0.35 for Ie &gt; 100 A) at 440 V 250 A</li><li>cos phi=0.45 (cos phi=0.35 for Ie &gt; 100 A) at 690 V 106 A</li><li>Maximum Electrical Switching Frequency:(AC-1) 600 cycles per hour</li><li>(AC-15) 1200 cycles per hour</li><li>(AC-2 / AC-4) 300 cycles per hour</li><li>(AC-3) 1200 cycles per hour</li><li>(DC-13) 900 cycles per hour</li><li>Rated Operational Current DC-1 (Ie):(110 V) 1-Pole, 40 °C 10 A</li><li>(110 V) 1-Pole, 60 °C 10 A</li><li>(110 V) 1-Pole, 70 °C 10 A</li><li>(110 V) 2 Poles in Series, 40 °C 25 A</li><li>(110 V) 2 Poles in Series, 60 °C 25 A</li><li>(110 V) 2 Poles in Series, 70 °C 22 A</li><li>(110 V) 3 Poles in Series, 40 °C 25 A</li><li>(110 V) 3 Poles in Series, 60 °C 25 A</li><li>(110 V) 3 Poles in Series, 70 °C 22 A</li><li>(220 V) 2 Poles in Series, 40 °C 10 A</li><li>(220 V) 2 Poles in Series, 60 °C 10 A</li><li>(220 V) 2 Poles in Series, 70 °C 10 A</li><li>(220 V) 3 Poles in Series, 40 °C 25 A</li><li>(220 V) 3 Poles in Series, 60 °C 25 A</li><li>(220 V) 3 Poles in Series, 70 °C 22 A</li><li>(72 V) 1-Pole, 40 °C 25 A</li><li>(72 V) 1-Pole, 60 °C 25 A</li><li>(72 V) 1-Pole, 70 °C 22 A</li><li>(72 V) 2 Poles in Series, 40 °C 25 A</li><li>(72 V) 2 Poles in Series, 60 °C 25 A</li><li>(72 V) 2 Poles in Series, 70 °C 22 A</li><li>(72 V) 3 Poles in Series, 40 °C 25 A</li><li>(72 V) 3 Poles in Series, 60 °C 25 A</li><li>(72 V) 3 Poles in Series, 70 °C 22 A</li><li>Rated Operational Current DC-3 (Ie):(110 V) 1-Pole, 40 °C 6 A</li><li>(110 V) 1-Pole, 60 °C 6 A</li><li>(110 V) 1-Pole, 70 °C 6 A</li><li>(110 V) 2 Poles in Series, 40 °C 25 A</li><li>(110 V) 2 Poles in Series, 60 °C 25 A</li><li>(110 V) 2 Poles in Series, 70 °C 22 A</li><li>(110 V) 3 Poles in Series, 40 °C 25 A</li><li>(110 V) 3 Poles in Series, 60 °C 25 A</li><li>(110 V) 3 Poles in Series, 70 °C 22 A</li><li>(220 V) 2 Poles in Series, 40 °C 6 A</li><li>(220 V) 2 Poles in Series, 60 °C 6 A</li><li>(220 V) 2 Poles in Series, 70 °C 6 A</li><li>(220 V) 3 Poles in Series, 40 °C 25 A</li><li>(220 V) 3 Poles in Series, 60 °C 25 A</li><li>(220 V) 3 Poles in Series, 70 °C 22 A</li><li>(72 V) 1-Pole, 40 °C 25 A</li><li>(72 V) 1-Pole, 60 °C 25 A</li><li>(72 V) 1-Pole, 70 °C 22 A</li><li>(72 V) 2 Poles in Series, 40 °C 25 A</li><li>(72 V) 2 Poles in Series, 60 °C 25 A</li><li>(72 V) 2 Poles in Series, 70 °C 22 A</li><li>(72 V) 3 Poles in Series, 40 °C 25 A</li><li>(72 V) 3 Poles in Series, 60 °C 25 A</li><li>(72 V) 3 Poles in Series, 70 °C 22 A</li><li>Rated Operational Current DC-5 (Ie):(110 V) 1-Pole, 40 °C 4 A</li><li>(110 V) 1-Pole, 60 °C 4 A</li><li>(110 V) 1-Pole, 70 °C 4 A</li><li>(110 V) 2 Poles in Series, 40 °C 10 A</li><li>(110 V) 2 Poles in Series, 60 °C 10 A</li><li>(110 V) 2 Poles in Series, 70 °C 10 A</li><li>(110 V) 3 Poles in Series, 40 °C 25 A</li><li>(110 V) 3 Poles in Series, 60 °C 25 A</li><li>(110 V) 3 Poles in Series, 70 °C 22 A</li><li>(220 V) 2 Poles in Series, 40 °C 4 A</li><li>(220 V) 2 Poles in Series, 60 °C 4 A</li><li>(220 V) 2 Poles in Series, 70 °C 4 A</li><li>(220 V) 3 Poles in Series, 40 °C 9 A</li><li>(220 V) 3 Poles in Series, 60 °C 9 A</li><li>(220 V) 3 Poles in Series, 70 °C 9 A</li><li>(72 V) 1-Pole, 40 °C 9 A</li><li>(72 V) 1-Pole, 60 °C 9 A</li><li>(72 V) 1-Pole, 70 °C 9 A</li><li>(72 V) 2 Poles in Series, 40 °C 25 A</li><li>(72 V) 2 Poles in Series, 60 °C 25 A</li><li>(72 V) 2 Poles in Series, 70 °C 22 A</li><li>(72 V) 3 Poles in Series, 40 °C 25 A</li><li>(72 V) 3 Poles in Series, 60 °C 25 A</li><li>(72 V) 3 Poles in Series, 70 °C 22 A</li><li>Rated Operational Current DC-13 (Ie):(24 V) 6 A / 144 W</li><li>(48 V) 2.8 A / 134 W</li><li>(72 V) 1 A / 72 W</li><li>(110 V) 0.55 A / 60 W</li><li>(125 V) 0.55 A / 69 W</li><li>(220 V) 0.27 A / 60 W</li><li>(250 V) 0.27 A / 68 W</li><li>(400 V) 0.15 A / 60 W</li><li>(500 V) 0.13 A / 65 W</li><li>(600 V) 0.1 A / 60 W</li><li>Rated Insulation Voltage (Ui):acc. to IEC 60947-4-1 690 V</li><li>acc. to IEC 60947-5-1 690 V</li><li>acc. to UL/CSA 600 V</li><li>Rated Impulse Withstand Voltage (Uimp):6 kV</li><li>Maximum Mechanical Switching Frequency:3600 cycles per hour</li><li>Rated Control Circuit Voltage (Uc):50 Hz 100 ... 250 V</li><li>60 Hz 100 ... 250 V</li><li>DC Operation 100 ... 250 V</li><li>Operate Time:Between Coil De-energization and NC Contact Closing 13 ... 98 ms</li><li>Between Coil De-energization and NO Contact Opening 11 ... 95 ms</li><li>Between Coil Energization and NC Contact Opening 38 ... 90 ms</li><li>Between Coil Energization and NO Contact Closing 40 ... 95 ms</li><li>Mounting on DIN Rail:TH35-15 (35 x 15 mm Mounting Rail) acc. to IEC 60715</li><li>TH35-7.5 (35 x 7.5 mm Mounting Rail) acc. to IEC 60715</li><li>Mounting by Screws (not supplied):2 x M4 screws placed diagonally</li><li>Connecting Capacity Main Circuit:Flexible with Ferrule 1/2x 0.75 ... 6 mm²</li><li>Flexible with Insulated Ferrule 1x 0.75 ... 4 mm²</li><li>Flexible with Insulated Ferrule 2x 0.75 ... 2.5 mm²</li><li>Rigid Solid 1/2x 1 ... 4 mm²</li><li>Rigid Stranded 1/2x 1 ... 6 mm²</li><li>Connecting Capacity Auxiliary Circuit:Flexible with Ferrule 1/2x 0.75 ... 2.5 mm²</li><li>Flexible with Insulated Ferrule 2x 0.75 ... 1.5 mm²</li><li>Flexible with Insulated Ferrule 1x 0.75 ... 2.5 mm²</li><li>Rigid Solid 1/2x 1 ... 2.5 mm²</li><li>Rigid Stranded 1/2x 1 ... 2.5 mm²</li><li>Connecting Capacity Control Circuit:Flexible with Ferrule 1/2x 0.75 ... 2.5 mm²</li><li>Flexible with Insulated Ferrule 1x 0.75 ... 2.5 mm²</li><li>Flexible with Insulated Ferrule 2x 0.75 ... 1.5 mm²</li><li>Rigid Solid 1/2x 1 ... 2.5 mm²</li><li>Rigid Stranded 1/2x 1 ... 2.5 mm²</li><li>Wire Stripping Length:Auxiliary Circuit 10 mm</li><li>Control Circuit 10 mm</li><li>Main Circuit 10 mm</li><li>Degree of Protection:acc. to IEC 60529, IEC 60947-1, EN 60529 Auxiliary Terminals IP20</li><li>acc. to IEC 60529, IEC 60947-1, EN 60529 Coil Terminals IP20</li><li>acc. to IEC 60529, IEC 60947-1, EN 60529 Main Terminals IP20</li><li>Terminal Type:Screw Terminals</li><li>Unit of Measurement : Pcs</li></ul>

<h3>Abb AX09-30-10-80 Contactor 3P 2.2KW 3NO 1AUX 50/60HZ 230-240VAC</h3>
&nbsp;&nbsp;
<ul>
<li>Product Net Width:45 mm</li>
<li>Product Net Depth / Length:77 mm</li>
<li>Product Net Height:86 mm</li>
<li>Product Net Weight:0.27 kg</li>
<li>Number of Main Contacts NO:3</li>
<li>Number of Main Contacts NC:0</li>
<li>Number of Auxiliary Contacts NO:1</li>
<li>Number of Auxiliary Contacts NC:0</li>
<li>Standards:IEC/EN 60947-1, IEC/EN 60947-4-1, UL 60947-4-1, CSA C22.2 No. 60947-4-1</li>
<li>Rated Operational Voltage:Auxiliary Circuit 690 V</li>
<li>Main Circuit 690 V</li>
<li>Rated Frequency (f):Auxiliary Circuit 50 / 60 Hz</li>
<li>Control Circuit 50 / 60 Hz</li>
<li>Main Circuit 50 / 60 Hz</li>
<li>Conventional Free-air Thermal Current (Ith):acc. to IEC 60947-4-1, Open Contactors Θ = 40 °C 35 A</li>
<li>acc. to IEC 60947-5-1, Θ = 40 °C 16 A</li>
<li>Rated Operational Current AC-1 (Ie):(690 V) 40 °C 25 A</li>
<li>(690 V) 60 °C 25 A</li>
<li>(690 V) 70 °C 22 A</li>
<li>Rated Operational Current AC-3 (Ie):(415 V) 60 °C 9 A</li>
<li>(440 V) 60 °C 9 A</li>
<li>(500 V) 60 °C 9.5 A</li>
<li>(690 V) 60 °C 7 A</li>
<li>(380 / 400 V) 60 °C 9 A</li>
<li>(220 / 230 / 240 V) 60 °C 9 A</li>
<li>Rated Operational Current AC-3e (Ie):(415 V) 60 °C 9 A</li>
<li>(440 V) 60 °C 9 A</li>
<li>(500 V) 60 °C 9.5 A</li>
<li>(690 V) 60 °C 7 A</li>
<li>(380 / 400 V) 60 °C 9 A</li>
<li>(220 / 230 / 240 V) 60 °C 9 A</li>
<li>Rated Operational Power AC-3 (Pe):(400 V) 4 kW</li>
<li>(415 V) 4 kW</li>
<li>(440 V) 4 kW</li>
<li>(500 V) 5.5 kW</li>
<li>(690 V) 5.5 kW</li>
<li>(380 / 400 V) 4 kW</li>
<li>(220 / 230 / 240 V) 2.2 kW</li>
<li>Rated Operational Power AC-3e (Pe):(415 V) 4 kW</li>
<li>(440 V) 4 kW</li>
<li>(500 V) 5.5 kW</li>
<li>(690 V) 5.5 kW</li>
<li>(380 / 400 V) 4 kW</li>
<li>(220 / 230 / 240 V) 2.2 kW</li>
<li>Rated Operational Current AC-15 (Ie):(500 V) 2 A</li>
<li>(690 V) 2 A</li>
<li>(24 / 127 V) 6 A</li>
<li>(220 / 240 V) 4 A</li>
<li>(400 / 440 V) 3 A</li>
<li>Rated Short-time Withstand Current Low Voltage (Icw):at 40 °C Ambient Temp, in Free Air, from a Cold State 10 s 150 A</li>
<li>at 40 °C Ambient Temp, in Free Air, from a Cold State 15 min 35 A</li>
<li>at 40 °C Ambient Temp, in Free Air, from a Cold State 1 min 60 A</li>
<li>at 40 °C Ambient Temp, in Free Air, from a Cold State 1 s 300 A</li>
<li>at 40 °C Ambient Temp, in Free Air, from a Cold State 30 s 80 A</li>
<li>for 0.1 s 140 A</li>
<li>for 1 s 100 A</li>
<li>Maximum Breaking Capacity:cos phi=0.45 (cos phi=0.35 for Ie &gt; 100 A) at 440 V 250 A</li>
<li>cos phi=0.45 (cos phi=0.35 for Ie &gt; 100 A) at 690 V 106 A</li>
<li>Maximum Electrical Switching Frequency:(AC-1) 600 cycles per hour</li>
<li>(AC-15) 1200 cycles per hour</li>
<li>(AC-2 / AC-4) 300 cycles per hour</li>
<li>(AC-3) 1200 cycles per hour</li>
<li>(DC-13) 900 cycles per hour</li>
<li>Rated Operational Current DC-1 (Ie):(110 V) 1-Pole, 40 °C 10 A</li>
<li>(110 V) 1-Pole, 60 °C 10 A</li>
<li>(110 V) 1-Pole, 70 °C 10 A</li>
<li>(110 V) 2 Poles in Series, 40 °C 25 A</li>
<li>(110 V) 2 Poles in Series, 60 °C 25 A</li>
<li>(110 V) 2 Poles in Series, 70 °C 22 A</li>
<li>(110 V) 3 Poles in Series, 40 °C 25 A</li>
<li>(110 V) 3 Poles in Series, 60 °C 25 A</li>
<li>(110 V) 3 Poles in Series, 70 °C 22 A</li>
<li>(220 V) 2 Poles in Series, 40 °C 10 A</li>
<li>(220 V) 2 Poles in Series, 60 °C 10 A</li>
<li>(220 V) 2 Poles in Series, 70 °C 10 A</li>
<li>(220 V) 3 Poles in Series, 40 °C 25 A</li>
<li>(220 V) 3 Poles in Series, 60 °C 25 A</li>
<li>(220 V) 3 Poles in Series, 70 °C 22 A</li>
<li>(72 V) 1-Pole, 40 °C 25 A</li>
<li>(72 V) 1-Pole, 60 °C 25 A</li>
<li>(72 V) 1-Pole, 70 °C 22 A</li>
<li>(72 V) 2 Poles in Series, 40 °C 25 A</li>
<li>(72 V) 2 Poles in Series, 60 °C 25 A</li>
<li>(72 V) 2 Poles in Series, 70 °C 22 A</li>
<li>(72 V) 3 Poles in Series, 40 °C 25 A</li>
<li>(72 V) 3 Poles in Series, 60 °C 25 A</li>
<li>(72 V) 3 Poles in Series, 70 °C 22 A</li>
<li>Rated Operational Current DC-3 (Ie):(110 V) 1-Pole, 40 °C 6 A</li>
<li>(110 V) 1-Pole, 60 °C 6 A</li>
<li>(110 V) 1-Pole, 70 °C 6 A</li>
<li>(110 V) 2 Poles in Series, 40 °C 25 A</li>
<li>(110 V) 2 Poles in Series, 60 °C 25 A</li>
<li>(110 V) 2 Poles in Series, 70 °C 22 A</li>
<li>(110 V) 3 Poles in Series, 40 °C 25 A</li>
<li>(110 V) 3 Poles in Series, 60 °C 25 A</li>
<li>(110 V) 3 Poles in Series, 70 °C 22 A</li>
<li>(220 V) 2 Poles in Series, 40 °C 6 A</li>
<li>(220 V) 2 Poles in Series, 60 °C 6 A</li>
<li>(220 V) 2 Poles in Series, 70 °C 6 A</li>
<li>(220 V) 3 Poles in Series, 40 °C 25 A</li>
<li>(220 V) 3 Poles in Series, 60 °C 25 A</li>
<li>(220 V) 3 Poles in Series, 70 °C 22 A</li>
<li>(72 V) 1-Pole, 40 °C 25 A</li>
<li>(72 V) 1-Pole, 60 °C 25 A</li>
<li>(72 V) 1-Pole, 70 °C 22 A</li>
<li>(72 V) 2 Poles in Series, 40 °C 25 A</li>
<li>(72 V) 2 Poles in Series, 60 °C 25 A</li>
<li>(72 V) 2 Poles in Series, 70 °C 22 A</li>
<li>(72 V) 3 Poles in Series, 40 °C 25 A</li>
<li>(72 V) 3 Poles in Series, 60 °C 25 A</li>
<li>(72 V) 3 Poles in Series, 70 °C 22 A</li>
<li>Rated Operational Current DC-5 (Ie):(110 V) 1-Pole, 40 °C 4 A</li>
<li>(110 V) 1-Pole, 60 °C 4 A</li>
<li>(110 V) 1-Pole, 70 °C 4 A</li>
<li>(110 V) 2 Poles in Series, 40 °C 10 A</li>
<li>(110 V) 2 Poles in Series, 60 °C 10 A</li>
<li>(110 V) 2 Poles in Series, 70 °C 10 A</li>
<li>(110 V) 3 Poles in Series, 40 °C 25 A</li>
<li>(110 V) 3 Poles in Series, 60 °C 25 A</li>
<li>(110 V) 3 Poles in Series, 70 °C 22 A</li>
<li>(220 V) 2 Poles in Series, 40 °C 4 A</li>
<li>(220 V) 2 Poles in Series, 60 °C 4 A</li>
<li>(220 V) 2 Poles in Series, 70 °C 4 A</li>
<li>(220 V) 3 Poles in Series, 40 °C 9 A</li>
<li>(220 V) 3 Poles in Series, 60 °C 9 A</li>
<li>(220 V) 3 Poles in Series, 70 °C 9 A</li>
<li>(72 V) 1-Pole, 40 °C 9 A</li>
<li>(72 V) 1-Pole, 60 °C 9 A</li>
<li>(72 V) 1-Pole, 70 °C 9 A</li>
<li>(72 V) 2 Poles in Series, 40 °C 25 A</li>
<li>(72 V) 2 Poles in Series, 60 °C 25 A</li>
<li>(72 V) 2 Poles in Series, 70 °C 22 A</li>
<li>(72 V) 3 Poles in Series, 40 °C 25 A</li>
<li>(72 V) 3 Poles in Series, 60 °C 25 A</li>
<li>(72 V) 3 Poles in Series, 70 °C 22 A</li>
<li>Rated Operational Current DC-13 (Ie):(24 V) 6 A / 144 W</li>
<li>(48 V) 2.8 A / 134 W</li>
<li>(72 V) 1 A / 72 W</li>
<li>(110 V) 0.55 A / 60 W</li>
<li>(125 V) 0.55 A / 69 W</li>
<li>(220 V) 0.27 A / 60 W</li>
<li>(250 V) 0.27 A / 68 W</li>
<li>(400 V) 0.15 A / 60 W</li>
<li>(500 V) 0.13 A / 65 W</li>
<li>(600 V) 0.1 A / 60 W</li>
<li>Rated Insulation Voltage (Ui):acc. to IEC 60947-4-1 690 V</li>
<li>acc. to IEC 60947-5-1 690 V</li>
<li>acc. to UL/CSA 600 V</li>
<li>Rated Impulse Withstand Voltage (Uimp):6 kV</li>
<li>Maximum Mechanical Switching Frequency:3600 cycles per hour</li>
<li>Rated Control Circuit Voltage (Uc):50 Hz 100 ... 250 V</li>
<li>60 Hz 100 ... 250 V</li>
<li>DC Operation 100 ... 250 V</li>
<li>Operate Time:Between Coil De-energization and NC Contact Closing 13 ... 98 ms</li>
<li>Between Coil De-energization and NO Contact Opening 11 ... 95 ms</li>
<li>Between Coil Energization and NC Contact Opening 38 ... 90 ms</li>
<li>Between Coil Energization and NO Contact Closing 40 ... 95 ms</li>
<li>Mounting on DIN Rail:TH35-15 (35 x 15 mm Mounting Rail) acc. to IEC 60715</li>
<li>TH35-7.5 (35 x 7.5 mm Mounting Rail) acc. to IEC 60715</li>
<li>Mounting by Screws (not supplied):2 x M4 screws placed diagonally</li>
<li>Connecting Capacity Main Circuit:Flexible with Ferrule 1/2x 0.75 ... 6 mm²</li>
<li>Flexible with Insulated Ferrule 1x 0.75 ... 4 mm²</li>
<li>Flexible with Insulated Ferrule 2x 0.75 ... 2.5 mm²</li>
<li>Rigid Solid 1/2x 1 ... 4 mm²</li>
<li>Rigid Stranded 1/2x 1 ... 6 mm²</li>
<li>Connecting Capacity Auxiliary Circuit:Flexible with Ferrule 1/2x 0.75 ... 2.5 mm²</li>
<li>Flexible with Insulated Ferrule 2x 0.75 ... 1.5 mm²</li>
<li>Flexible with Insulated Ferrule 1x 0.75 ... 2.5 mm²</li>
<li>Rigid Solid 1/2x 1 ... 2.5 mm²</li>
<li>Rigid Stranded 1/2x 1 ... 2.5 mm²</li>
<li>Connecting Capacity Control Circuit:Flexible with Ferrule 1/2x 0.75 ... 2.5 mm²</li>
<li>Flexible with Insulated Ferrule 1x 0.75 ... 2.5 mm²</li>
<li>Flexible with Insulated Ferrule 2x 0.75 ... 1.5 mm²</li>
<li>Rigid Solid 1/2x 1 ... 2.5 mm²</li>
<li>Rigid Stranded 1/2x 1 ... 2.5 mm²</li>
<li>Wire Stripping Length:Auxiliary Circuit 10 mm</li>
<li>Control Circuit 10 mm</li>
<li>Main Circuit 10 mm</li>
<li>Degree of Protection:acc. to IEC 60529, IEC 60947-1, EN 60529 Auxiliary Terminals IP20</li>
<li>acc. to IEC 60529, IEC 60947-1, EN 60529 Coil Terminals IP20</li>
<li>acc. to IEC 60529, IEC 60947-1, EN 60529 Main Terminals IP20</li>
<li>Terminal Type:Screw Terminals</li>
<li>Unit of Measurement : Pcs</li>
</ul>

Jimmy Foo

Philips

Thomas & Betts

BRADY

Bussmann

Weidmuller

FUJI

Crouse-Hinds

Circuit Breaker

Fuses & Fusegear

Plugs & Connector 

Light Bulbs

Led Lights

Other Electrical Accessories

Light Tubes

Doreen Tan

abb ax09-30-10-80 contactor 3p 2.2kw 3no 1aux 50/60hz 230-240vac kontaktor contactors para kontraktor penyentuh penghubung 接触器

abb-ax09-30-10-80-contactor-3p-2-2kw-3no-1aux-50-60hz-230-240vac

SEALXTREME® Active Leak Repair Kit seals active pressurized leak

under 30 minutes. It stops leaks on the pipe without the requirement of

the system shut down. The maximum pressure Active Leak Repair Kit can

seal is approximately 150 psi (10Bar) of live operating water pressure.

This is a specially formulated wrap repair system that is durable and

cost-effective to seal pipe leaks with high industrial strength.

FEATURES:
-  Handy wrap repair system designed to fix active leaks in 15 minutes
-  Provide permanent repair
-  Repair active leak up to 150 psi
-  Extend pipe life
-  No shutdown required
-  Applicable to any metal or non-metal pipes up to 18-inch diameter
-  Withstand pressure up to 400psi and temperature up to 200°C when cured
-  Chemical resistance (acids, alkalis, solvents and etc)


KEY TECHNICAL DATA:

• Tensile Strength : 36,000 psi

• Application Temperature : 0°C to 65°C

• Service Temperature : -50°C to 120°C

PACKAGING INFORMATION:
Each Kit Contains:
- QuikControl Fiberglass Repair Tape
- QuikControl Sealing Tape
- SmartStic Underwater Epoxy Stick
- Protective Gloves

QuikControl Fibreglass 2" x 6fts + 25mm x 3mtr x 0.5mm (SALRK0206)

QuikControl Fibreglass 2" x 12fts + 25mm x 3mtr x 0.5mm (SALRK0212)

QuikControl Fibreglass 3" x 9fts + 32mm x 5mtr x 0.5mm (SALRK0309)

QuikControl Fibreglass 4" x 12fts + 50mm x 5mtr x 0.5mm (SALRK0412)

<h3 class="md-block-header-three">SealXtreme PLUS Active Leak Repair Kit </h3>SEALXTREME® Active Leak Repair Kit seals active pressurized leakunder 30 minutes. It stops leaks on the pipe without the requirement ofthe system shut down. The maximum pressure Active Leak Repair Kit canseal is approximately 150 psi (10Bar) of live operating water pressure.This is a specially formulated wrap repair system that is durable andcost-effective to seal pipe leaks with high industrial strength. FEATURES: -  Handy wrap repair system designed to fix active leaks in 15 minutes -  Provide permanent repair -  Repair active leak up to 150 psi -  Extend pipe life -  No shutdown required -  Applicable to any metal or non-metal pipes up to 18-inch diameter -  Withstand pressure up to 400psi and temperature up to 200°C when cured -  Chemical resistance (acids, alkalis, solvents and etc) KEY TECHNICAL DATA: • Tensile Strength : 36,000 psi• Lap Shear Strength : 900 psi• Flexural Strength : 26,000 psi• Application Temperature : 0°C to 65°C• Dielectric Strength : 16,000 volts• Hardness : 85 Shore D• Service Temperature : -50°C to 120°C• Design Pressure : 400 psiPACKAGING INFORMATION: Each Kit Contains: - QuikControl Fiberglass Repair Tape - QuikControl Sealing Tape - SmartStic Underwater Epoxy Stick - Protective GlovesPackaging <ul class="md-block-unordered-list-item"><li>QuikControl Fibreglass 2&quot; x 6fts + 25mm x 3mtr x 0.5mm (SALRK0206)</li><li>QuikControl Fibreglass 2&quot; x 12fts + 25mm x 3mtr x 0.5mm (SALRK0212)</li><li>QuikControl Fibreglass 3&quot; x 9fts + 32mm x 5mtr x 0.5mm (SALRK0309)</li><li>QuikControl Fibreglass 4&quot; x 12fts + 50mm x 5mtr x 0.5mm (SALRK0412)</li></ul>

<h3>SealXtreme PLUS Active Leak Repair Kit&nbsp;</h3>
SEALXTREME® Active Leak Repair Kit seals active pressurized leak
under 30 minutes. It stops leaks on the pipe without the requirement of
the system shut down. The maximum pressure Active Leak Repair Kit can
seal is approximately 150 psi (10Bar) of live operating water pressure.
This is a specially formulated wrap repair system that is durable and
cost-effective to seal pipe leaks with high industrial strength. 
 
FEATURES: 
-  Handy wrap repair system designed to fix <ins>active leaks</ins> in 15 minutes 
-  Provide permanent repair 
-  Repair active leak up to 150 psi 
-  Extend pipe life 
-  No shutdown required 
-  Applicable to any metal or non-metal pipes up to 18-inch diameter 
-  Withstand pressure up to 400psi and temperature up to 200°C when cured 
-  Chemical resistance (acids, alkalis, solvents and etc) 

KEY TECHNICAL DATA: 
 
• Tensile Strength : 36,000 psi
• Lap Shear Strength : 900 psi
• Flexural Strength : 26,000 psi
• Application Temperature : 0°C to 65°C
• Dielectric Strength : 16,000 volts
• Hardness : 85 Shore D
• Service Temperature : -50°C to 120°C
• Design Pressure : 400 psi
PACKAGING INFORMATION: 
Each Kit Contains: 
- QuikControl Fiberglass Repair Tape 
- QuikControl Sealing Tape 
- SmartStic Underwater Epoxy Stick 
- Protective Gloves
Packaging&nbsp;
<ul>
<li>QuikControl Fibreglass 2" x 6fts + 25mm x 3mtr x 0.5mm (SALRK0206)</li>
<li>QuikControl Fibreglass 2" x 12fts + 25mm x 3mtr x 0.5mm (SALRK0212)</li>
<li>QuikControl Fibreglass 3" x 9fts + 32mm x 5mtr x 0.5mm (SALRK0309)</li>
<li>QuikControl Fibreglass 4" x 12fts + 50mm x 5mtr x 0.5mm (SALRK0412)</li>
</ul>

Company Name

EcoCoil

Others

Wrap-Pro

SEALXPERT

MecSealant

SealXtreme

QuikControl

SmartStic

CorSmart

Fix'N'Fast Bond

Aircon Coil Cleaners

Disinfectants and Sanitisers

Putty

Epoxy

Clamps

Threadlocker

Fillers

Oil Seals

Retaining Compound

Alchem Manufacturing Pte Ltd 

Alchem - Sealxtreme Active Leak Repair Kit (salrk 0206)

alchem sealxtreme active leak repair kit (salrk 0206) ​​- perbaikan kebocoran aktif pembaikan pemulihan alchem/炼金术 主动泄漏修复套件 泄漏修复 炼金术

alchem-sealxtreme-active-leak-repair-kit-salrk-0206

SealXtreme PLUS Active Leak Repair Kit 2" x 6fts + 25mm x 3mtr x 0.5mm (SALRK0206)

SealXtreme PLUS Active Leak Repair Kit 2" x 12fts + 25mm x 3mtr x 0.5mm (SALRK0212)

SealXtreme PLUS Active Leak Repair Kit 3" x 9fts + 32mm x 5mtr x 0.5mm (SALRK0309)

SealXtreme PLUS Active Leak Repair Kit 4" x 12fts + 50mm x 5mtr x 0.5mm (SALRK0412)

Packing 

Abb AX12-30-10-80 Contactor 3P 5.5KW 3NO 1AUX 50/60HZ 230-240VAC

<h3 class="md-block-header-three">Abb AX12-30-10-80 Contactor 3P 5.5KW 3NO 1AUX 50/60HZ 230-240VAC</h3> <ul class="md-block-unordered-list-item"><li>Product Net Width:45 mm</li><li>Product Net Depth / Length:77 mm</li><li>Product Net Height:86 mm</li><li>Product Net Weight:0.27 kg</li><li>Number of Main Contacts NO:3</li><li>Number of Main Contacts NC:0</li><li>Number of Auxiliary Contacts NO:1</li><li>Number of Auxiliary Contacts NC:0</li><li>Standards:IEC/EN 60947-1, IEC/EN 60947-4-1, UL 60947-4-1, CSA C22.2 No. 60947-4-1</li><li>Rated Operational Voltage:Auxiliary Circuit 690 V</li><li>Main Circuit 690 V</li><li>Rated Frequency (f):Auxiliary Circuit 50 / 60 Hz</li><li>Control Circuit 50 / 60 Hz</li><li>Main Circuit 50 / 60 Hz</li><li>Conventional Free-air Thermal Current (Ith):acc. to IEC 60947-4-1, Open Contactors Θ = 40 °C 35 A</li><li>acc. to IEC 60947-5-1, Θ = 40 °C 16 A</li><li>Rated Operational Current AC-1 (Ie):(690 V) 40 °C 25 A</li><li>(690 V) 60 °C 25 A</li><li>(690 V) 70 °C 22 A</li><li>Rated Operational Current AC-3 (Ie):(415 V) 60 °C 9 A</li><li>(440 V) 60 °C 9 A</li><li>(500 V) 60 °C 9.5 A</li><li>(690 V) 60 °C 7 A</li><li>(380 / 400 V) 60 °C 9 A</li><li>(220 / 230 / 240 V) 60 °C 9 A</li><li>Rated Operational Current AC-3e (Ie):(415 V) 60 °C 9 A</li><li>(440 V) 60 °C 9 A</li><li>(500 V) 60 °C 9.5 A</li><li>(690 V) 60 °C 7 A</li><li>(380 / 400 V) 60 °C 9 A</li><li>(220 / 230 / 240 V) 60 °C 9 A</li><li>Rated Operational Power AC-3 (Pe):(400 V) 4 kW</li><li>(415 V) 4 kW</li><li>(440 V) 4 kW</li><li>(500 V) 5.5 kW</li><li>(690 V) 5.5 kW</li><li>(380 / 400 V) 4 kW</li><li>(220 / 230 / 240 V) 2.2 kW</li><li>Rated Operational Power AC-3e (Pe):(415 V) 4 kW</li><li>(440 V) 4 kW</li><li>(500 V) 5.5 kW</li><li>(690 V) 5.5 kW</li><li>(380 / 400 V) 4 kW</li><li>(220 / 230 / 240 V) 2.2 kW</li><li>Rated Operational Current AC-15 (Ie):(500 V) 2 A</li><li>(690 V) 2 A</li><li>(24 / 127 V) 6 A</li><li>(220 / 240 V) 4 A</li><li>(400 / 440 V) 3 A</li><li>Rated Short-time Withstand Current Low Voltage (Icw):at 40 °C Ambient Temp, in Free Air, from a Cold State 10 s 150 A</li><li>at 40 °C Ambient Temp, in Free Air, from a Cold State 15 min 35 A</li><li>at 40 °C Ambient Temp, in Free Air, from a Cold State 1 min 60 A</li><li>at 40 °C Ambient Temp, in Free Air, from a Cold State 1 s 300 A</li><li>at 40 °C Ambient Temp, in Free Air, from a Cold State 30 s 80 A</li><li>for 0.1 s 140 A</li><li>for 1 s 100 A</li><li>Maximum Breaking Capacity:cos phi=0.45 (cos phi=0.35 for Ie &gt; 100 A) at 440 V 250 A</li><li>cos phi=0.45 (cos phi=0.35 for Ie &gt; 100 A) at 690 V 106 A</li><li>Maximum Electrical Switching Frequency:(AC-1) 600 cycles per hour</li><li>(AC-15) 1200 cycles per hour</li><li>(AC-2 / AC-4) 300 cycles per hour</li><li>(AC-3) 1200 cycles per hour</li><li>(DC-13) 900 cycles per hour</li><li>Rated Operational Current DC-1 (Ie):(110 V) 1-Pole, 40 °C 10 A</li><li>(110 V) 1-Pole, 60 °C 10 A</li><li>(110 V) 1-Pole, 70 °C 10 A</li><li>(110 V) 2 Poles in Series, 40 °C 25 A</li><li>(110 V) 2 Poles in Series, 60 °C 25 A</li><li>(110 V) 2 Poles in Series, 70 °C 22 A</li><li>(110 V) 3 Poles in Series, 40 °C 25 A</li><li>(110 V) 3 Poles in Series, 60 °C 25 A</li><li>(110 V) 3 Poles in Series, 70 °C 22 A</li><li>(220 V) 2 Poles in Series, 40 °C 10 A</li><li>(220 V) 2 Poles in Series, 60 °C 10 A</li><li>(220 V) 2 Poles in Series, 70 °C 10 A</li><li>(220 V) 3 Poles in Series, 40 °C 25 A</li><li>(220 V) 3 Poles in Series, 60 °C 25 A</li><li>(220 V) 3 Poles in Series, 70 °C 22 A</li><li>(72 V) 1-Pole, 40 °C 25 A</li><li>(72 V) 1-Pole, 60 °C 25 A</li><li>(72 V) 1-Pole, 70 °C 22 A</li><li>(72 V) 2 Poles in Series, 40 °C 25 A</li><li>(72 V) 2 Poles in Series, 60 °C 25 A</li><li>(72 V) 2 Poles in Series, 70 °C 22 A</li><li>(72 V) 3 Poles in Series, 40 °C 25 A</li><li>(72 V) 3 Poles in Series, 60 °C 25 A</li><li>(72 V) 3 Poles in Series, 70 °C 22 A</li><li>Rated Operational Current DC-3 (Ie):(110 V) 1-Pole, 40 °C 6 A</li><li>(110 V) 1-Pole, 60 °C 6 A</li><li>(110 V) 1-Pole, 70 °C 6 A</li><li>(110 V) 2 Poles in Series, 40 °C 25 A</li><li>(110 V) 2 Poles in Series, 60 °C 25 A</li><li>(110 V) 2 Poles in Series, 70 °C 22 A</li><li>(110 V) 3 Poles in Series, 40 °C 25 A</li><li>(110 V) 3 Poles in Series, 60 °C 25 A</li><li>(110 V) 3 Poles in Series, 70 °C 22 A</li><li>(220 V) 2 Poles in Series, 40 °C 6 A</li><li>(220 V) 2 Poles in Series, 60 °C 6 A</li><li>(220 V) 2 Poles in Series, 70 °C 6 A</li><li>(220 V) 3 Poles in Series, 40 °C 25 A</li><li>(220 V) 3 Poles in Series, 60 °C 25 A</li><li>(220 V) 3 Poles in Series, 70 °C 22 A</li><li>(72 V) 1-Pole, 40 °C 25 A</li><li>(72 V) 1-Pole, 60 °C 25 A</li><li>(72 V) 1-Pole, 70 °C 22 A</li><li>(72 V) 2 Poles in Series, 40 °C 25 A</li><li>(72 V) 2 Poles in Series, 60 °C 25 A</li><li>(72 V) 2 Poles in Series, 70 °C 22 A</li><li>(72 V) 3 Poles in Series, 40 °C 25 A</li><li>(72 V) 3 Poles in Series, 60 °C 25 A</li><li>(72 V) 3 Poles in Series, 70 °C 22 A</li><li>Rated Operational Current DC-5 (Ie):(110 V) 1-Pole, 40 °C 4 A</li><li>(110 V) 1-Pole, 60 °C 4 A</li><li>(110 V) 1-Pole, 70 °C 4 A</li><li>(110 V) 2 Poles in Series, 40 °C 10 A</li><li>(110 V) 2 Poles in Series, 60 °C 10 A</li><li>(110 V) 2 Poles in Series, 70 °C 10 A</li><li>(110 V) 3 Poles in Series, 40 °C 25 A</li><li>(110 V) 3 Poles in Series, 60 °C 25 A</li><li>(110 V) 3 Poles in Series, 70 °C 22 A</li><li>(220 V) 2 Poles in Series, 40 °C 4 A</li><li>(220 V) 2 Poles in Series, 60 °C 4 A</li><li>(220 V) 2 Poles in Series, 70 °C 4 A</li><li>(220 V) 3 Poles in Series, 40 °C 9 A</li><li>(220 V) 3 Poles in Series, 60 °C 9 A</li><li>(220 V) 3 Poles in Series, 70 °C 9 A</li><li>(72 V) 1-Pole, 40 °C 9 A</li><li>(72 V) 1-Pole, 60 °C 9 A</li><li>(72 V) 1-Pole, 70 °C 9 A</li><li>(72 V) 2 Poles in Series, 40 °C 25 A</li><li>(72 V) 2 Poles in Series, 60 °C 25 A</li><li>(72 V) 2 Poles in Series, 70 °C 22 A</li><li>(72 V) 3 Poles in Series, 40 °C 25 A</li><li>(72 V) 3 Poles in Series, 60 °C 25 A</li><li>(72 V) 3 Poles in Series, 70 °C 22 A</li><li>Rated Operational Current DC-13 (Ie):(24 V) 6 A / 144 W</li><li>(48 V) 2.8 A / 134 W</li><li>(72 V) 1 A / 72 W</li><li>(110 V) 0.55 A / 60 W</li><li>(125 V) 0.55 A / 69 W</li><li>(220 V) 0.27 A / 60 W</li><li>(250 V) 0.27 A / 68 W</li><li>(400 V) 0.15 A / 60 W</li><li>(500 V) 0.13 A / 65 W</li><li>(600 V) 0.1 A / 60 W</li><li>Rated Insulation Voltage (Ui):acc. to IEC 60947-4-1 690 V</li><li>acc. to IEC 60947-5-1 690 V</li><li>acc. to UL/CSA 600 V</li><li>Rated Impulse Withstand Voltage (Uimp):6 kV</li><li>Maximum Mechanical Switching Frequency:3600 cycles per hour</li><li>Rated Control Circuit Voltage (Uc):50 Hz 100 ... 250 V</li><li>60 Hz 100 ... 250 V</li><li>DC Operation 100 ... 250 V</li><li>Operate Time:Between Coil De-energization and NC Contact Closing 13 ... 98 ms</li><li>Between Coil De-energization and NO Contact Opening 11 ... 95 ms</li><li>Between Coil Energization and NC Contact Opening 38 ... 90 ms</li><li>Between Coil Energization and NO Contact Closing 40 ... 95 ms</li><li>Mounting on DIN Rail:TH35-15 (35 x 15 mm Mounting Rail) acc. to IEC 60715</li><li>TH35-7.5 (35 x 7.5 mm Mounting Rail) acc. to IEC 60715</li><li>Mounting by Screws (not supplied):2 x M4 screws placed diagonally</li><li>Connecting Capacity Main Circuit:Flexible with Ferrule 1/2x 0.75 ... 6 mm²</li><li>Flexible with Insulated Ferrule 1x 0.75 ... 4 mm²</li><li>Flexible with Insulated Ferrule 2x 0.75 ... 2.5 mm²</li><li>Rigid Solid 1/2x 1 ... 4 mm²</li><li>Rigid Stranded 1/2x 1 ... 6 mm²</li><li>Connecting Capacity Auxiliary Circuit:Flexible with Ferrule 1/2x 0.75 ... 2.5 mm²</li><li>Flexible with Insulated Ferrule 2x 0.75 ... 1.5 mm²</li><li>Flexible with Insulated Ferrule 1x 0.75 ... 2.5 mm²</li><li>Rigid Solid 1/2x 1 ... 2.5 mm²</li><li>Rigid Stranded 1/2x 1 ... 2.5 mm²</li><li>Connecting Capacity Control Circuit:Flexible with Ferrule 1/2x 0.75 ... 2.5 mm²</li><li>Flexible with Insulated Ferrule 1x 0.75 ... 2.5 mm²</li><li>Flexible with Insulated Ferrule 2x 0.75 ... 1.5 mm²</li><li>Rigid Solid 1/2x 1 ... 2.5 mm²</li><li>Rigid Stranded 1/2x 1 ... 2.5 mm²</li><li>Wire Stripping Length:Auxiliary Circuit 10 mm</li><li>Control Circuit 10 mm</li><li>Main Circuit 10 mm</li><li>Degree of Protection:acc. to IEC 60529, IEC 60947-1, EN 60529 Auxiliary Terminals IP20</li><li>acc. to IEC 60529, IEC 60947-1, EN 60529 Coil Terminals IP20</li><li>acc. to IEC 60529, IEC 60947-1, EN 60529 Main Terminals IP20</li><li>Terminal Type:Screw Terminals</li><li>Unit of Measurement : Pcs</li></ul>

<h3>Abb AX12-30-10-80 Contactor 3P 5.5KW 3NO 1AUX 50/60HZ 230-240VAC</h3>
&nbsp;&nbsp;
<ul>
<li>Product Net Width:45 mm</li>
<li>Product Net Depth / Length:77 mm</li>
<li>Product Net Height:86 mm</li>
<li>Product Net Weight:0.27 kg</li>
<li>Number of Main Contacts NO:3</li>
<li>Number of Main Contacts NC:0</li>
<li>Number of Auxiliary Contacts NO:1</li>
<li>Number of Auxiliary Contacts NC:0</li>
<li>Standards:IEC/EN 60947-1, IEC/EN 60947-4-1, UL 60947-4-1, CSA C22.2 No. 60947-4-1</li>
<li>Rated Operational Voltage:Auxiliary Circuit 690 V</li>
<li>Main Circuit 690 V</li>
<li>Rated Frequency (f):Auxiliary Circuit 50 / 60 Hz</li>
<li>Control Circuit 50 / 60 Hz</li>
<li>Main Circuit 50 / 60 Hz</li>
<li>Conventional Free-air Thermal Current (Ith):acc. to IEC 60947-4-1, Open Contactors Θ = 40 °C 35 A</li>
<li>acc. to IEC 60947-5-1, Θ = 40 °C 16 A</li>
<li>Rated Operational Current AC-1 (Ie):(690 V) 40 °C 25 A</li>
<li>(690 V) 60 °C 25 A</li>
<li>(690 V) 70 °C 22 A</li>
<li>Rated Operational Current AC-3 (Ie):(415 V) 60 °C 9 A</li>
<li>(440 V) 60 °C 9 A</li>
<li>(500 V) 60 °C 9.5 A</li>
<li>(690 V) 60 °C 7 A</li>
<li>(380 / 400 V) 60 °C 9 A</li>
<li>(220 / 230 / 240 V) 60 °C 9 A</li>
<li>Rated Operational Current AC-3e (Ie):(415 V) 60 °C 9 A</li>
<li>(440 V) 60 °C 9 A</li>
<li>(500 V) 60 °C 9.5 A</li>
<li>(690 V) 60 °C 7 A</li>
<li>(380 / 400 V) 60 °C 9 A</li>
<li>(220 / 230 / 240 V) 60 °C 9 A</li>
<li>Rated Operational Power AC-3 (Pe):(400 V) 4 kW</li>
<li>(415 V) 4 kW</li>
<li>(440 V) 4 kW</li>
<li>(500 V) 5.5 kW</li>
<li>(690 V) 5.5 kW</li>
<li>(380 / 400 V) 4 kW</li>
<li>(220 / 230 / 240 V) 2.2 kW</li>
<li>Rated Operational Power AC-3e (Pe):(415 V) 4 kW</li>
<li>(440 V) 4 kW</li>
<li>(500 V) 5.5 kW</li>
<li>(690 V) 5.5 kW</li>
<li>(380 / 400 V) 4 kW</li>
<li>(220 / 230 / 240 V) 2.2 kW</li>
<li>Rated Operational Current AC-15 (Ie):(500 V) 2 A</li>
<li>(690 V) 2 A</li>
<li>(24 / 127 V) 6 A</li>
<li>(220 / 240 V) 4 A</li>
<li>(400 / 440 V) 3 A</li>
<li>Rated Short-time Withstand Current Low Voltage (Icw):at 40 °C Ambient Temp, in Free Air, from a Cold State 10 s 150 A</li>
<li>at 40 °C Ambient Temp, in Free Air, from a Cold State 15 min 35 A</li>
<li>at 40 °C Ambient Temp, in Free Air, from a Cold State 1 min 60 A</li>
<li>at 40 °C Ambient Temp, in Free Air, from a Cold State 1 s 300 A</li>
<li>at 40 °C Ambient Temp, in Free Air, from a Cold State 30 s 80 A</li>
<li>for 0.1 s 140 A</li>
<li>for 1 s 100 A</li>
<li>Maximum Breaking Capacity:cos phi=0.45 (cos phi=0.35 for Ie &gt; 100 A) at 440 V 250 A</li>
<li>cos phi=0.45 (cos phi=0.35 for Ie &gt; 100 A) at 690 V 106 A</li>
<li>Maximum Electrical Switching Frequency:(AC-1) 600 cycles per hour</li>
<li>(AC-15) 1200 cycles per hour</li>
<li>(AC-2 / AC-4) 300 cycles per hour</li>
<li>(AC-3) 1200 cycles per hour</li>
<li>(DC-13) 900 cycles per hour</li>
<li>Rated Operational Current DC-1 (Ie):(110 V) 1-Pole, 40 °C 10 A</li>
<li>(110 V) 1-Pole, 60 °C 10 A</li>
<li>(110 V) 1-Pole, 70 °C 10 A</li>
<li>(110 V) 2 Poles in Series, 40 °C 25 A</li>
<li>(110 V) 2 Poles in Series, 60 °C 25 A</li>
<li>(110 V) 2 Poles in Series, 70 °C 22 A</li>
<li>(110 V) 3 Poles in Series, 40 °C 25 A</li>
<li>(110 V) 3 Poles in Series, 60 °C 25 A</li>
<li>(110 V) 3 Poles in Series, 70 °C 22 A</li>
<li>(220 V) 2 Poles in Series, 40 °C 10 A</li>
<li>(220 V) 2 Poles in Series, 60 °C 10 A</li>
<li>(220 V) 2 Poles in Series, 70 °C 10 A</li>
<li>(220 V) 3 Poles in Series, 40 °C 25 A</li>
<li>(220 V) 3 Poles in Series, 60 °C 25 A</li>
<li>(220 V) 3 Poles in Series, 70 °C 22 A</li>
<li>(72 V) 1-Pole, 40 °C 25 A</li>
<li>(72 V) 1-Pole, 60 °C 25 A</li>
<li>(72 V) 1-Pole, 70 °C 22 A</li>
<li>(72 V) 2 Poles in Series, 40 °C 25 A</li>
<li>(72 V) 2 Poles in Series, 60 °C 25 A</li>
<li>(72 V) 2 Poles in Series, 70 °C 22 A</li>
<li>(72 V) 3 Poles in Series, 40 °C 25 A</li>
<li>(72 V) 3 Poles in Series, 60 °C 25 A</li>
<li>(72 V) 3 Poles in Series, 70 °C 22 A</li>
<li>Rated Operational Current DC-3 (Ie):(110 V) 1-Pole, 40 °C 6 A</li>
<li>(110 V) 1-Pole, 60 °C 6 A</li>
<li>(110 V) 1-Pole, 70 °C 6 A</li>
<li>(110 V) 2 Poles in Series, 40 °C 25 A</li>
<li>(110 V) 2 Poles in Series, 60 °C 25 A</li>
<li>(110 V) 2 Poles in Series, 70 °C 22 A</li>
<li>(110 V) 3 Poles in Series, 40 °C 25 A</li>
<li>(110 V) 3 Poles in Series, 60 °C 25 A</li>
<li>(110 V) 3 Poles in Series, 70 °C 22 A</li>
<li>(220 V) 2 Poles in Series, 40 °C 6 A</li>
<li>(220 V) 2 Poles in Series, 60 °C 6 A</li>
<li>(220 V) 2 Poles in Series, 70 °C 6 A</li>
<li>(220 V) 3 Poles in Series, 40 °C 25 A</li>
<li>(220 V) 3 Poles in Series, 60 °C 25 A</li>
<li>(220 V) 3 Poles in Series, 70 °C 22 A</li>
<li>(72 V) 1-Pole, 40 °C 25 A</li>
<li>(72 V) 1-Pole, 60 °C 25 A</li>
<li>(72 V) 1-Pole, 70 °C 22 A</li>
<li>(72 V) 2 Poles in Series, 40 °C 25 A</li>
<li>(72 V) 2 Poles in Series, 60 °C 25 A</li>
<li>(72 V) 2 Poles in Series, 70 °C 22 A</li>
<li>(72 V) 3 Poles in Series, 40 °C 25 A</li>
<li>(72 V) 3 Poles in Series, 60 °C 25 A</li>
<li>(72 V) 3 Poles in Series, 70 °C 22 A</li>
<li>Rated Operational Current DC-5 (Ie):(110 V) 1-Pole, 40 °C 4 A</li>
<li>(110 V) 1-Pole, 60 °C 4 A</li>
<li>(110 V) 1-Pole, 70 °C 4 A</li>
<li>(110 V) 2 Poles in Series, 40 °C 10 A</li>
<li>(110 V) 2 Poles in Series, 60 °C 10 A</li>
<li>(110 V) 2 Poles in Series, 70 °C 10 A</li>
<li>(110 V) 3 Poles in Series, 40 °C 25 A</li>
<li>(110 V) 3 Poles in Series, 60 °C 25 A</li>
<li>(110 V) 3 Poles in Series, 70 °C 22 A</li>
<li>(220 V) 2 Poles in Series, 40 °C 4 A</li>
<li>(220 V) 2 Poles in Series, 60 °C 4 A</li>
<li>(220 V) 2 Poles in Series, 70 °C 4 A</li>
<li>(220 V) 3 Poles in Series, 40 °C 9 A</li>
<li>(220 V) 3 Poles in Series, 60 °C 9 A</li>
<li>(220 V) 3 Poles in Series, 70 °C 9 A</li>
<li>(72 V) 1-Pole, 40 °C 9 A</li>
<li>(72 V) 1-Pole, 60 °C 9 A</li>
<li>(72 V) 1-Pole, 70 °C 9 A</li>
<li>(72 V) 2 Poles in Series, 40 °C 25 A</li>
<li>(72 V) 2 Poles in Series, 60 °C 25 A</li>
<li>(72 V) 2 Poles in Series, 70 °C 22 A</li>
<li>(72 V) 3 Poles in Series, 40 °C 25 A</li>
<li>(72 V) 3 Poles in Series, 60 °C 25 A</li>
<li>(72 V) 3 Poles in Series, 70 °C 22 A</li>
<li>Rated Operational Current DC-13 (Ie):(24 V) 6 A / 144 W</li>
<li>(48 V) 2.8 A / 134 W</li>
<li>(72 V) 1 A / 72 W</li>
<li>(110 V) 0.55 A / 60 W</li>
<li>(125 V) 0.55 A / 69 W</li>
<li>(220 V) 0.27 A / 60 W</li>
<li>(250 V) 0.27 A / 68 W</li>
<li>(400 V) 0.15 A / 60 W</li>
<li>(500 V) 0.13 A / 65 W</li>
<li>(600 V) 0.1 A / 60 W</li>
<li>Rated Insulation Voltage (Ui):acc. to IEC 60947-4-1 690 V</li>
<li>acc. to IEC 60947-5-1 690 V</li>
<li>acc. to UL/CSA 600 V</li>
<li>Rated Impulse Withstand Voltage (Uimp):6 kV</li>
<li>Maximum Mechanical Switching Frequency:3600 cycles per hour</li>
<li>Rated Control Circuit Voltage (Uc):50 Hz 100 ... 250 V</li>
<li>60 Hz 100 ... 250 V</li>
<li>DC Operation 100 ... 250 V</li>
<li>Operate Time:Between Coil De-energization and NC Contact Closing 13 ... 98 ms</li>
<li>Between Coil De-energization and NO Contact Opening 11 ... 95 ms</li>
<li>Between Coil Energization and NC Contact Opening 38 ... 90 ms</li>
<li>Between Coil Energization and NO Contact Closing 40 ... 95 ms</li>
<li>Mounting on DIN Rail:TH35-15 (35 x 15 mm Mounting Rail) acc. to IEC 60715</li>
<li>TH35-7.5 (35 x 7.5 mm Mounting Rail) acc. to IEC 60715</li>
<li>Mounting by Screws (not supplied):2 x M4 screws placed diagonally</li>
<li>Connecting Capacity Main Circuit:Flexible with Ferrule 1/2x 0.75 ... 6 mm²</li>
<li>Flexible with Insulated Ferrule 1x 0.75 ... 4 mm²</li>
<li>Flexible with Insulated Ferrule 2x 0.75 ... 2.5 mm²</li>
<li>Rigid Solid 1/2x 1 ... 4 mm²</li>
<li>Rigid Stranded 1/2x 1 ... 6 mm²</li>
<li>Connecting Capacity Auxiliary Circuit:Flexible with Ferrule 1/2x 0.75 ... 2.5 mm²</li>
<li>Flexible with Insulated Ferrule 2x 0.75 ... 1.5 mm²</li>
<li>Flexible with Insulated Ferrule 1x 0.75 ... 2.5 mm²</li>
<li>Rigid Solid 1/2x 1 ... 2.5 mm²</li>
<li>Rigid Stranded 1/2x 1 ... 2.5 mm²</li>
<li>Connecting Capacity Control Circuit:Flexible with Ferrule 1/2x 0.75 ... 2.5 mm²</li>
<li>Flexible with Insulated Ferrule 1x 0.75 ... 2.5 mm²</li>
<li>Flexible with Insulated Ferrule 2x 0.75 ... 1.5 mm²</li>
<li>Rigid Solid 1/2x 1 ... 2.5 mm²</li>
<li>Rigid Stranded 1/2x 1 ... 2.5 mm²</li>
<li>Wire Stripping Length:Auxiliary Circuit 10 mm</li>
<li>Control Circuit 10 mm</li>
<li>Main Circuit 10 mm</li>
<li>Degree of Protection:acc. to IEC 60529, IEC 60947-1, EN 60529 Auxiliary Terminals IP20</li>
<li>acc. to IEC 60529, IEC 60947-1, EN 60529 Coil Terminals IP20</li>
<li>acc. to IEC 60529, IEC 60947-1, EN 60529 Main Terminals IP20</li>
<li>Terminal Type:Screw Terminals</li>
<li>Unit of Measurement : Pcs</li>
</ul>

abb ax12-30-10-80 contactor 3p 5.5kw 3no 1aux 50/60hz 230-240vac kontaktor contactors para kontraktor penyentuh penghubung 接触器

abb-ax12-30-10-80-contactor-3p-5-5kw-3no-1aux-50-60hz-230-240vac

SPOTLIGHT - High Performance Floor Finish

SPOTLIGHT is a premium wax polish with metal cross-link polymers that provides a brilliant clear non-yellowing finish upon application and provides an even higher gloss after ultra-high-speed buffing. It is extremely hard and durable, ideal for use on floor areas with heavy traffic. SPOTLIGHT is the perfect high-performance, low-maintenance finish for most floorings.

Use SPOTLIGHT with total confidence on vinyl, sealed wood, linoleum and ceramic tiled floors. It is also suitable for stone floorings such as marble,   granite, and terrazzo.

Provides clear and high gloss upon application.

Excellent durability against heel and scuff marks, thus reducing maintenance cost.

Higher gloss can be obtained by buffing with ultra-high-speed machines (1000- 2000 rpm).

Floors that are worn out can easily be repaired by spray buffing with SUNUP PLUS without having to strip the floors.

<h3 class="md-block-header-three">SPOTLIGHT - High Performance Floor Finish</h3>Product DescriptionSPOTLIGHT is a premium wax polish with metal cross-link polymers that provides a brilliant clear non-yellowing finish upon application and provides an even higher gloss after ultra-high-speed buffing. It is extremely hard and durable, ideal for use on floor areas with heavy traffic. SPOTLIGHT is the perfect high-performance, low-maintenance finish for most floorings.Areas of UseUse SPOTLIGHT with total confidence on vinyl, sealed wood, linoleum and ceramic tiled floors. It is also suitable for stone floorings such as marble, granite, and terrazzo.Special Features<ul class="md-block-unordered-list-item"><li>Provides clear and high gloss upon application.</li><li>Excellent durability against heel and scuff marks, thus reducing maintenance cost.</li><li>Higher gloss can be obtained by buffing with ultra-high-speed machines (1000- 2000 rpm).</li><li>Floors that are worn out can easily be repaired by spray buffing with SUNUP PLUS without having to strip the floors.</li></ul>Specification<ul class="md-block-unordered-list-item"><li>Brand: Klenco</li><li>Product Type: Floor Finish</li><li>SKU: 106019</li><li>Capacity: 5 Litres </li></ul>

<h3>SPOTLIGHT - High Performance Floor Finish</h3>
<ins>Product Description</ins>
SPOTLIGHT is a premium wax polish with metal cross-link polymers that provides a brilliant clear non-yellowing finish upon application and provides an even higher gloss after ultra-high-speed buffing. It is extremely hard and durable, ideal for use on floor areas with heavy traffic. SPOTLIGHT is the perfect high-performance, low-maintenance finish for most floorings.
<ins>Areas of Use</ins>
Use SPOTLIGHT with total confidence on vinyl, sealed wood, linoleum and ceramic tiled floors. It is also suitable for stone floorings such as marble, granite, and terrazzo.
<ins>Special Features</ins>
<ul>
<li>Provides clear and high gloss upon application.</li>
<li>Excellent durability against heel and scuff marks, thus reducing maintenance cost.</li>
<li>Higher gloss can be obtained by buffing with ultra-high-speed machines (1000- 2000 rpm).</li>
<li>Floors that are worn out can easily be repaired by spray buffing with SUNUP PLUS without having to strip the floors.</li>
</ul>
<ins>Specification</ins>
<ul>
<li>Brand: Klenco</li>
<li>Product Type: Floor Finish</li>
<li>SKU: 106019</li>
<li>Capacity: 5 Litres&nbsp;</li>
</ul>

Klenco (Singapore) Pte Ltd

MAKITA

Kleanway

Cleaning Tools

Vacuums & Floor Care

Multi Purpose Cleaners

Towel & Tissue Dispensers

Kitchen Tools

Safety Gloves

Bathroom Accessories

Indoor Bins

Toiletries

Jia Min

Klenco Chemical - Spotlight High Performance Floor Finish [5 Litres]

klenco chemical spotlight high performance floor finish [5 litres] finishing lantai berkinerja tinggi sorotan liter] polishing liquids cairan pemoles kemasan berprestasi lampu tumpuan cecair pengilat klenco/克伦科 聚光灯高性能地板面漆 升] 抛光液 克伦科