Ansell

CONDOR

RS Pro

WORKSAFE

Mechanical Parts

mechanical-parts

O Ring

o-ring

Safety

safety

Safety Gloves

safety-gloves

Nitrile is often referred to Buna (Buna-N) and NBR.

Nitrile elastomer being affordable is a common material widely used in the industry where sealing take place using O-Ring. It is popular in the industry due to it ability to withstand a wide range of temperature ranging from (-30`C to 100`C). 

It has excellent resistance to petroleum application, it is rated good in the Gas impermeability. In addition Nitrile material are one of the best in its compression and abrasion resistance. The only down side of Nitrile have a poor ozone and weather resistance and only moderate resistance to high temperature.

However Nitrile are not a restricting factors in many applications.

Overview on Application Rating for Material Nitrile (NBR) 

Other than the size and material type, there is one final option that you need to take in consideration. And that is the Durometer. Durometer are being classify as an industry standard to measure the elastomer hardness. Durometer is measured and listed in accordance with Shore A scale. Typical standard hardness for the elastomer are 70 shore, 75 shore and 90 shore to choose from depending on the material that you are using. The higher the value of the shore indicates that the material you are using is harder.Durometer is also generally stated and accepted with a “+/- 5” tolerance.

O-Rings and rubber seals are generally used for:

· Applications that require resistance to OIL

· Applications that are required to work in low temperatures (-0°C)

· High performance Fuel systems that requires strictly no leakage

O-rings need to be installed properly for a perfect fit and sealing. It is important that you install the O-ring in a prescribed manner to ensure your application continues to function properly. You will also ensure you increase the life of the application.

The process of installing an O-ring into a male gland is an intricate affair that should be carefully undertaken. Glide it along the shaft so as it reaches the gland. At that point, it should easily snap into place. Simple as it might sound, a number of steps will ensure that the O-ring doesn’t get damaged.

If you want to install an O-ring correctly and within a short time, here are steps to follow:

· Covering and lubricating the threading of the shaft

The threading of the shaft has the potential of tearing the rubber seal. Cover the threads using a masking tape and then lubricate them to allow for easy passage of the O-ring. The aim is to have the O-ring slide through without getting torn.

That’s a tip that will save you the stress of a torn O-ring. In fact, running the O-ring over jagged or sharp objects could get it torn. You may not be able to notice some of these tears. That’s why you should ensure you prevent them from occurring in the first place.

You will have to stretch the O-ring over the shaft. Ensure you do it evenly. Pulling from one side is a no-no. If anything, you should stretch the O-ring as little as possible. You will not just get a tighter grip but added security too.

Instead of rolling the O-ring down the shaft, slide it. If you spiral wind or roll an O-ring, it cannot be properly installed. It will also not function optimally and can even end up being damaged. If you have a lubricant, apply it on the O-ring and you will keep it rolling.

Place the female component in a manner that allows its radius to go around the corner. This should be done when you are finalizing the installation process. Ensure the lead of this component is inside the chamfer. This is how you will be able to guarantee the safety of the O-ring.

For O-rings to perform optimally, they have to be properly installed. It doesn’t just provide secure sealing but also increases the service life of the component together with the application. Don’t compromise on this process.

ORING AS568 AS217 ID 29.74 x CS 3.53Material : Nitrile (NBR) 90 Shore Additional InformationNitrile is often referred to Buna (Buna-N) and NBR.Nitrile elastomer being affordable is a common material widely used in the industry where sealing take place using O-Ring. It is popular in the industry due to it ability to withstand a wide range of temperature ranging from (-30&#x60;C to 100&#x60;C). It has excellent resistance to petroleum application, it is rated good in the Gas impermeability. In addition Nitrile material are one of the best in its compression and abrasion resistance. The only down side of Nitrile have a poor ozone and weather resistance and only moderate resistance to high temperature.However Nitrile are not a restricting factors in many applications.Temperature RangeLow : -22&#x60;F / -30&#x60;C High: 212&#x60;F / 100&#x60;COverview on Application Rating for Material Nitrile (NBR) Properties ( Rating )Oils &amp; Grease - GoodTear Strength - GoodFuel Resistance - PoorGas impermeability - GoodCompression - ExcellentAbrasion Resistance - Good Other than the size and material type, there is one final option that you need to take in consideration. And that is the Durometer. Durometer are being classify as an industry standard to measure the elastomer hardness. Durometer is measured and listed in accordance with Shore A scale. Typical standard hardness for the elastomer are 70 shore, 75 shore and 90 shore to choose from depending on the material that you are using. The higher the value of the shore indicates that the material you are using is harder.Durometer is also generally stated and accepted with a “+/- 5” tolerance.Primary UsageO-Rings and rubber seals are generally used for:· Applications that require resistance to OIL· Applications that are required to work in low temperatures (-0°C)· High performance Fuel systems that requires strictly no leakage<ul class="md-block-unordered-list-item"><li>Aircrafts</li><li>Marine Ships</li><li>F1 Cars</li></ul>· General Industrial Use Tips for installation of an O-ringO-rings need to be installed properly for a perfect fit and sealing. It is important that you install the O-ring in a prescribed manner to ensure your application continues to function properly. You will also ensure you increase the life of the application.So how do you install an O-ring?The process of installing an O-ring into a male gland is an intricate affair that should be carefully undertaken. Glide it along the shaft so as it reaches the gland. At that point, it should easily snap into place. Simple as it might sound, a number of steps will ensure that the O-ring doesn’t get damaged.If you want to install an O-ring correctly and within a short time, here are steps to follow:· Covering and lubricating the threading of the shaftThe threading of the shaft has the potential of tearing the rubber seal. Cover the threads using a masking tape and then lubricate them to allow for easy passage of the O-ring. The aim is to have the O-ring slide through without getting torn.· Don’t force it over sharp cornersThat’s a tip that will save you the stress of a torn O-ring. In fact, running the O-ring over jagged or sharp objects could get it torn. You may not be able to notice some of these tears. That’s why you should ensure you prevent them from occurring in the first place.· Even stretchingYou will have to stretch the O-ring over the shaft. Ensure you do it evenly. Pulling from one side is a no-no. If anything, you should stretch the O-ring as little as possible. You will not just get a tighter grip but added security too.· Don’t roll it down the shaftInstead of rolling the O-ring down the shaft, slide it. If you spiral wind or roll an O-ring, it cannot be properly installed. It will also not function optimally and can even end up being damaged. If you have a lubricant, apply it on the O-ring and you will keep it rolling.· Finishing it offPlace the female component in a manner that allows its radius to go around the corner. This should be done when you are finalizing the installation process. Ensure the lead of this component is inside the chamfer. This is how you will be able to guarantee the safety of the O-ring.For O-rings to perform optimally, they have to be properly installed. It doesn’t just provide secure sealing but also increases the service life of the component together with the application. Don’t compromise on this process.Installation Guide<figure class="md-block-image"><img src="https://storage.googleapis.com/eezee-product-images/bddd4GmCYttMWoAq8oDEJw.png" alt="" /><figcaption className="md-block-image-caption"></figcaption></figure>

ORING AS568 AS217
&nbsp;ID 29.74 x CS 3.53
Material : Nitrile (NBR) 90 Shore&nbsp;&nbsp;&nbsp;&nbsp;
<ins>Additional Information</ins>
Nitrile is often referred to Buna (Buna-N) and NBR.
Nitrile elastomer being affordable is a common material widely used in the industry where sealing take place using O-Ring. It is popular in the industry due to it ability to withstand a wide range of temperature ranging from (-30`C to 100`C).&nbsp;
It has excellent resistance to petroleum application, it is rated good in the Gas impermeability. In addition Nitrile material are one of the best in its compression and abrasion resistance. The only down side of Nitrile have a poor ozone and weather resistance and only moderate resistance to high temperature.
However Nitrile are not a restricting factors in many applications.
<ins>Temperature Range</ins>
Low : -22`F / -30`C High: 212`F / 100`C
<ins>Overview on Application Rating for Material Nitrile (NBR) </ins>
Properties ( Rating )
Oils &amp; Grease - Good
Tear Strength - Good
Fuel Resistance - Poor
Gas impermeability - Good
Compression - Excellent
Abrasion Resistance - Good&nbsp;
Other than the size and material type, there is one final option that you need to take in consideration. And that is the Durometer. Durometer are being classify as an industry standard to measure the elastomer hardness. Durometer is measured and listed in accordance with Shore A scale. Typical standard hardness for the elastomer are 70 shore, 75 shore and 90 shore to choose from depending on the material that you are using. The higher the value of the shore indicates that the material you are using is harder.Durometer is also generally stated and accepted with a “+/- 5” tolerance.
<ins>Primary Usage</ins>
O-Rings and rubber seals are generally used for:
· Applications that require resistance to OIL
· Applications that are required to work in low temperatures (-0°C)
· High performance Fuel systems that requires strictly no leakage
<ul>
<li>Aircrafts</li>
<li>Marine Ships</li>
<li>F1 Cars</li>
</ul>
· General Industrial Use&nbsp;
<ins>Tips for installation of an O-ring</ins>
O-rings need to be installed properly for a perfect fit and sealing. It is important that you install the O-ring in a prescribed manner to ensure your application continues to function properly. You will also ensure you increase the life of the application.
<ins>So how do you install an O-ring?</ins>
The process of installing an O-ring into a male gland is an intricate affair that should be carefully undertaken. Glide it along the shaft so as it reaches the gland. At that point, it should easily snap into place. Simple as it might sound, a number of steps will ensure that the O-ring doesn’t get damaged.
If you want to install an O-ring correctly and within a short time, here are steps to follow:
· Covering and lubricating the threading of the shaft
The threading of the shaft has the potential of tearing the rubber seal. Cover the threads using a masking tape and then lubricate them to allow for easy passage of the O-ring. The aim is to have the O-ring slide through without getting torn.
· Don’t force it over sharp corners
That’s a tip that will save you the stress of a torn O-ring. In fact, running the O-ring over jagged or sharp objects could get it torn. You may not be able to notice some of these tears. That’s why you should ensure you prevent them from occurring in the first place.
· Even stretching
You will have to stretch the O-ring over the shaft. Ensure you do it evenly. Pulling from one side is a no-no. If anything, you should stretch the O-ring as little as possible. You will not just get a tighter grip but added security too.
· Don’t roll it down the shaft
Instead of rolling the O-ring down the shaft, slide it. If you spiral wind or roll an O-ring, it cannot be properly installed. It will also not function optimally and can even end up being damaged. If you have a lubricant, apply it on the O-ring and you will keep it rolling.
· Finishing it off
Place the female component in a manner that allows its radius to go around the corner. This should be done when you are finalizing the installation process. Ensure the lead of this component is inside the chamfer. This is how you will be able to guarantee the safety of the O-ring.
For O-rings to perform optimally, they have to be properly installed. It doesn’t just provide secure sealing but also increases the service life of the component together with the application. Don’t compromise on this process.
<ins>Installation Guide</ins>

 <div class="img-ctnr">
 <amp-img 
 on="tap:2mv6b"
 tabindex="0"
 role="button"
 class="contain"
 layout="fill"
 src="https://storage.googleapis.com/eezee-product-images/bddd4GmCYttMWoAq8oDEJw.png"
 ></amp-img>
 </div>
 
 <amp-image-lightbox 
 id="2mv6b" 
 layout="nodisplay"></amp-image-lightbox>

John

Others

Optibelt

Gates

SAMTECH

VITON

V Rings

Rubber Seals

Oil Seals

Shaft Couplings

Plumbing Tools & Equipment

Ball Bearings

Hydraulic Seals

Wall Plugs, Anchors, Fixings & Kits

Vee-Belts

buyerIntroduction

ORING AS568 AS217 ID 29.74 x CS 3.53 Nitrile (NBR) 90 Shore

oring as568 as217 id 29.74 cs 3.53 nitrile (nbr) 90 shore 29,74 3,53 ring o-ring oem gelang oem/oem代工 3.53丁腈（nbr）90肖氏 o型圈 oem代工

oring-as568-as217-id-29-74-x-cs-3-53-nitrile-nbr-90-shore

RS PRO Datasheet

RS PRO O-Rings Overview

PHOENIX CONTACT

Mag-Lite

Facom

Wago

Kimberly Clark

HEICO

Screw

Plugs & Connector 

Panel Mount Indicators 

Clamps

Indicator Lights

Ethernet Cable

Drill Bits & Drill Bit Sets

Bolts

Electrical Wire 

Fuses & Fusegear

RS Components ETH SG

Rs Pro 1964926 Nitrile Rubber O-Ring, 74mm Bore, 78mm Outer Diameter (1 Bag of 20)

rs pro 1964926 nitrile rubber o-ring, 74mm bore, 78mm outer diameter (1 bag 20) lubang 74mm, luar kantong isi ring o-ring cincin getah nitril, bor beg gelang 丁腈橡胶 形圈，74 毫米内径，78 毫米外径（1 20 个） o型圈 rs专业版

rs-pro-1964926-nitrile-rubber-o-ring-74mm-bore-78mm-outer-diameter-1-bag-of-20

Rs Pro 2555938 Nitrile O-Ring, 74mm Bore, 82mm Outer Diameter (1 Bag of 20)

rs pro 2555938 nitrile o-ring, 74mm bore, 82mm outer diameter (1 bag 20) nitril lubang 74mm, luar kantong isi ring o-ring cincin nitril, bor beg gelang 丁腈 形圈，74mm 内径，82mm 外径（1 20 个） o型圈 rs专业版

rs-pro-2555938-nitrile-o-ring-74mm-bore-82mm-outer-diameter-1-bag-of-20

Rs Pro 2555937 Nitrile O-Ring, 74mm Bore, 79mm Outer Diameter (1 Bag of 20)

rs pro 2555937 nitrile o-ring, 74mm bore, 79mm outer diameter (1 bag 20) nitril lubang 74mm, luar kantong isi ring o-ring cincin nitril, bor beg gelang 丁腈 形圈，74 毫米内径，79 毫米外径（1 20 个） o型圈 rs专业版

rs-pro-2555937-nitrile-o-ring-74mm-bore-79mm-outer-diameter-1-bag-of-20

Rs Pro 1965073 Nitrile Rubber O-Ring, 74mm Bore, 80mm Outer Diameter (1 Bag of 20)

rs pro 1965073 nitrile rubber o-ring, 74mm bore, 80mm outer diameter (1 bag 20) lubang 74mm, luar kantong isi ring o-ring cincin getah nitril, bor beg gelang 丁腈橡胶 形圈，74 毫米内径，80 毫米外径（1 20 个） o型圈 rs专业版

rs-pro-1965073-nitrile-rubber-o-ring-74mm-bore-80mm-outer-diameter-1-bag-of-20

Rs Pro 2556021 Nitrile O-Ring, 74mm Bore, 76mm Outer Diameter (1 Bag of 25)

rs pro 2556021 nitrile o-ring, 74mm bore, 76mm outer diameter (1 bag 25) nitril lubang 74mm, luar kantong isi ring o-ring cincin nitril, bor beg gelang 丁腈 形圈，74 毫米内径，76 毫米外径（1 25 个） o型圈 rs专业版

rs-pro-2556021-nitrile-o-ring-74mm-bore-76mm-outer-diameter-1-bag-of-25

Rs Pro 1965439 Nitrile Rubber O-Ring, 72mm Bore, 74mm Outer Diameter (1 Bag of 20)

rs pro 1965439 nitrile rubber o-ring, 72mm bore, 74mm outer diameter (1 bag 20) lubang 72mm, luar kantong isi ring o-ring cincin getah nitril, bor beg gelang 丁腈橡胶 形圈，72 毫米内径，74 毫米外径（1 20 个） o型圈 rs专业版

rs-pro-1965439-nitrile-rubber-o-ring-72mm-bore-74mm-outer-diameter-1-bag-of-20

Rs Pro 2556020 Nitrile O-Ring, 74mm Bore, 77mm Outer Diameter (1 Bag of 25)

rs pro 2556020 nitrile o-ring, 74mm bore, 77mm outer diameter (1 bag 25) nitril lubang 74mm, luar kantong isi ring o-ring cincin nitril, bor beg gelang 丁腈 形圈，74mm 内径，77mm 外径（1 25 个） o型圈 rs专业版

rs-pro-2556020-nitrile-o-ring-74mm-bore-77mm-outer-diameter-1-bag-of-25

Rs Pro 2556045 Nitrile O-Ring, 74mm Bore, 86mm Outer Diameter (1 Bag of 5)

rs pro 2556045 nitrile o-ring, 74mm bore, 86mm outer diameter (1 bag 5) nitril lubang 74mm, luar kantong isi ring o-ring cincin nitril, bor beg gelang 丁腈 形圈，74mm 内径，86mm 外径（1 个） o型圈 rs专业版

rs-pro-2556045-nitrile-o-ring-74mm-bore-86mm-outer-diameter-1-bag-of-5

Nitrile elastomer being affordable is a common material widely used in the industry where sealing take place using O-Ring. It is popular in the industry due to it ability to withstand a wide range of temperature ranging from (-30`C to 100`C).  

Overview on Application Rating for Material Nitrile (NBR)  

Other than the size and material type, there is one final option that you need to take in consideration. And that is the Durometer. Durometer are being classify as an industry standard to measure the elastomer hardness. Durometer is measured and listed in accordance with Shore A scale. Typical standard hardness for the elastomer are 70 shore, 75 shore and 90 shore to choose from depending on the material that you are using. The higher the value of the shore indicates that the material you are using is harder. Durometer is also generally stated and accepted with a “+/- 5” tolerance.  

Applications that require resistance to OIL 

Applications that are required to work in low temperatures (-0°C) 

High performance Fuel systems that requires strictly no leakage

Covering 	and lubricating the threading of the shaft 

ORING AS568 AS152 ID 82.22 X CS 2.62Material : Nitrile (NBR) 90 Shore Additional InformationNitrile is often referred to Buna (Buna-N) and NBR.Nitrile elastomer being affordable is a common material widely used in the industry where sealing take place using O-Ring. It is popular in the industry due to it ability to withstand a wide range of temperature ranging from (-30&#x60;C to 100&#x60;C). It has excellent resistance to petroleum application, it is rated good in the Gas impermeability. In addition Nitrile material are one of the best in its compression and abrasion resistance. The only down side of Nitrile have a poor ozone and weather resistance and only moderate resistance to high temperature.However Nitrile are not a restricting factors in many applications.Temperature RangeLow : -22&#x60;F / -30&#x60;C High: 212&#x60;F / 100&#x60;COverview on Application Rating for Material Nitrile (NBR) Properties ( Rating )Oils &amp; Grease - GoodTear Strength - GoodFuel Resistance - PoorGas impermeability - GoodCompression - ExcellentAbrasion Resistance - Good Other than the size and material type, there is one final option that you need to take in consideration. And that is the Durometer. Durometer are being classify as an industry standard to measure the elastomer hardness. Durometer is measured and listed in accordance with Shore A scale. Typical standard hardness for the elastomer are 70 shore, 75 shore and 90 shore to choose from depending on the material that you are using. The higher the value of the shore indicates that the material you are using is harder. Durometer is also generally stated and accepted with a “+/- 5” tolerance. Primary UsageO-Rings and rubber seals are generally used for:<ul class="md-block-unordered-list-item"><li>Applications that require resistance to OIL </li><li>Applications that are required to work in low temperatures (-0°C) </li><li>High performance Fuel systems that requires strictly no leakage</li><ul class="md-block-unordered-list-item"><li>Aircrafts </li><li>Marine Ships </li><li>F1 Cars</li></ul><li>General Industrial Use </li></ul>Tips for installation of an O-ringO-rings need to be installed properly for a perfect fit and sealing. It is important that you install the O-ring in a prescribed manner to ensure your application continues to function properly. You will also ensure you increase the life of the application.So how do you install an O-ring?The process of installing an O-ring into a male gland is an intricate affair that should be carefully undertaken. Glide it along the shaft so as it reaches the gland. At that point, it should easily snap into place. Simple as it might sound, a number of steps will ensure that the O-ring doesn’t get damaged.If you want to install an O-ring correctly and within a short time, here are steps to follow:<ul class="md-block-unordered-list-item"><li>Covering 	and lubricating the threading of the shaft </li></ul>The threading of the shaft has the potential of tearing the rubber seal. Cover the threads using a masking tape and then lubricate them to allow for easy passage of the O-ring. The aim is to have the O-ring slide through without getting torn.<ul class="md-block-unordered-list-item"><li>Don’t force it over sharp corners </li></ul>That’s a tip that will save you the stress of a torn O-ring. In fact, running the O-ring over jagged or sharp objects could get it torn. You may not be able to notice some of these tears. That’s why you should ensure you prevent them from occurring in the first place.<ul class="md-block-unordered-list-item"><li>Even stretching </li></ul>You will have to stretch the O-ring over the shaft. Ensure you do it evenly. Pulling from one side is a no-no. If anything, you should stretch the O-ring as little as possible. You will not just get a tighter grip but added security too.<ul class="md-block-unordered-list-item"><li>Don’t roll it down the shaft </li></ul>Instead of rolling the O-ring down the shaft, slide it. If you spiral wind or roll an O-ring, it cannot be properly installed. It will also not function optimally and can even end up being damaged. If you have a lubricant, apply it on the O-ring and you will keep it rolling.<ul class="md-block-unordered-list-item"><li>Finishing 	it off </li></ul>Place the female component in a manner that allows its radius to go around the corner. This should be done when you are finalizing the installation process. Ensure the lead of this component is inside the chamfer. This is how you will be able to guarantee the safety of the O-ring.For O-rings to perform optimally, they have to be properly installed. It doesn’t just provide secure sealing but also increases the service life of the component together with the application. Don’t compromise on this process.Installation Guide<figure class="md-block-image"><img src="https://storage.googleapis.com/eezee-product-images/guPMnLtbXzcf4d_smH8hs4.png" alt="" /><figcaption className="md-block-image-caption"></figcaption></figure>

ORING AS568 AS152
&nbsp;ID 82.22 X CS 2.62
Material : Nitrile (NBR) 90 Shore&nbsp;&nbsp;&nbsp;&nbsp;
<ins>Additional Information</ins>
Nitrile is often referred to Buna (Buna-N) and NBR.
Nitrile elastomer being affordable is a common material widely used in the industry where sealing take place using O-Ring. It is popular in the industry due to it ability to withstand a wide range of temperature ranging from (-30`C to 100`C).&nbsp;&nbsp;
It has excellent resistance to petroleum application, it is rated good in the Gas impermeability. In addition Nitrile material are one of the best in its compression and abrasion resistance. The only down side of Nitrile have a poor ozone and weather resistance and only moderate resistance to high temperature.
However Nitrile are not a restricting factors in many applications.
<ins>Temperature Range</ins>
Low : -22`F / -30`C High: 212`F / 100`C
<ins>Overview on Application Rating for Material Nitrile (NBR) </ins>&nbsp;
Properties ( Rating )
Oils &amp; Grease - Good
Tear Strength - Good
Fuel Resistance - Poor
Gas impermeability - Good
Compression - Excellent
Abrasion Resistance - Good&nbsp;&nbsp;
Other than the size and material type, there is one final option that you need to take in consideration. And that is the Durometer. Durometer are being classify as an industry standard to measure the elastomer hardness. Durometer is measured and listed in accordance with Shore A scale. Typical standard hardness for the elastomer are 70 shore, 75 shore and 90 shore to choose from depending on the material that you are using. The higher the value of the shore indicates that the material you are using is harder. Durometer is also generally stated and accepted with a “+/- 5” tolerance.&nbsp;&nbsp;
<ins>Primary Usage</ins>
O-Rings and rubber seals are generally used for:
<ul>
<li>Applications that require resistance to OIL&nbsp;</li>
<li>Applications that are required to work in low temperatures (-0°C)&nbsp;</li>
<li>High performance Fuel systems that requires strictly no leakage</li>
<ul>
<li>Aircrafts&nbsp;</li>
<li>Marine Ships&nbsp;</li>
<li>F1 Cars</li>
</ul>
<li>General Industrial Use&nbsp;&nbsp;&nbsp;</li>
</ul>
<ins>Tips for installation of an O-ring</ins>
O-rings need to be installed properly for a perfect fit and sealing. It is important that you install the O-ring in a prescribed manner to ensure your application continues to function properly. You will also ensure you increase the life of the application.
<ins>So how do you install an O-ring?</ins>
The process of installing an O-ring into a male gland is an intricate affair that should be carefully undertaken. Glide it along the shaft so as it reaches the gland. At that point, it should easily snap into place. Simple as it might sound, a number of steps will ensure that the O-ring doesn’t get damaged.
If you want to install an O-ring correctly and within a short time, here are steps to follow:
<ul>
<li>Covering 	and lubricating the threading of the shaft&nbsp;</li>
</ul>
The threading of the shaft has the potential of tearing the rubber seal. Cover the threads using a masking tape and then lubricate them to allow for easy passage of the O-ring. The aim is to have the O-ring slide through without getting torn.
<ul>
<li>Don’t force it over sharp corners&nbsp;</li>
</ul>
That’s a tip that will save you the stress of a torn O-ring. In fact, running the O-ring over jagged or sharp objects could get it torn. You may not be able to notice some of these tears. That’s why you should ensure you prevent them from occurring in the first place.
<ul>
<li>Even stretching&nbsp;</li>
</ul>
You will have to stretch the O-ring over the shaft. Ensure you do it evenly. Pulling from one side is a no-no. If anything, you should stretch the O-ring as little as possible. You will not just get a tighter grip but added security too.
<ul>
<li>Don’t roll it down the shaft&nbsp;</li>
</ul>
Instead of rolling the O-ring down the shaft, slide it. If you spiral wind or roll an O-ring, it cannot be properly installed. It will also not function optimally and can even end up being damaged. If you have a lubricant, apply it on the O-ring and you will keep it rolling.
<ul>
<li>Finishing 	it off&nbsp;</li>
</ul>
Place the female component in a manner that allows its radius to go around the corner. This should be done when you are finalizing the installation process. Ensure the lead of this component is inside the chamfer. This is how you will be able to guarantee the safety of the O-ring.
For O-rings to perform optimally, they have to be properly installed. It doesn’t just provide secure sealing but also increases the service life of the component together with the application. Don’t compromise on this process.
<ins>Installation Guide</ins>

 <div class="img-ctnr">
 <amp-img 
 on="tap:cioag"
 tabindex="0"
 role="button"
 class="contain"
 layout="fill"
 src="https://storage.googleapis.com/eezee-product-images/guPMnLtbXzcf4d_smH8hs4.png"
 ></amp-img>
 </div>
 
 <amp-image-lightbox 
 id="cioag" 
 layout="nodisplay"></amp-image-lightbox>

ORING AS568 AS152 ID 82.22 X CS 2.62 Nitrile (NBR) 90 Shore

oring as568 as152 id 82.22 cs 2.62 nitrile (nbr) 90 shore ring o-ring oem gelang oem/oem代工 2.62腈（nbr）90肖氏 o型圈 oem代工

oring-as568-as152-id-82-22-x-cs-2-62-nitrile-nbr-90-shore

Rs Pro 1964925 Nitrile Rubber O-Ring, 70mm Bore, 74mm Outer Diameter (1 Bag of 20)

rs pro 1964925 nitrile rubber o-ring, 70mm bore, 74mm outer diameter (1 bag 20) lubang 70mm, luar kantong isi ring o-ring cincin getah nitril, bor beg gelang 丁腈橡胶 形圈，70 毫米内径，74 毫米外径（1 20 个） o型圈 rs专业版

rs-pro-1964925-nitrile-rubber-o-ring-70mm-bore-74mm-outer-diameter-1-bag-of-20

Rs Pro 2556015 Nitrile O-Ring, 68mm Bore, 74mm Outer Diameter (1 Bag of 25)

rs pro 2556015 nitrile o-ring, 68mm bore, 74mm outer diameter (1 bag 25) nitril lubang 68mm, luar kantong isi ring o-ring cincin nitril, bor beg gelang 丁腈 形圈，68 毫米内径，74 毫米外径（1 25 个） o型圈 rs专业版

rs-pro-2556015-nitrile-o-ring-68mm-bore-74mm-outer-diameter-1-bag-of-25

Rs Pro 2555922 Nitrile O-Ring, 69mm Bore, 74mm Outer Diameter (1 Bag of 20)

rs pro 2555922 nitrile o-ring, 69mm bore, 74mm outer diameter (1 bag 20) nitril lubang 69mm, luar kantong isi ring o-ring cincin nitril, bor beg gelang 丁腈 形圈，69 毫米内径，74 毫米外径（1 20 个） o型圈 rs专业版

rs-pro-2555922-nitrile-o-ring-69mm-bore-74mm-outer-diameter-1-bag-of-20

Grainger

Condor 60VY74 Vf Coated Gloves M Nitrile 60VY82 Pr

condor 60vy74 vf coated gloves nitrile 60vy82 pr sarung tangan berlapis nitril safety keselamatan bersalut 涂层手套 丁腈 安全手套 秃鹰

condor-60vy74-vf-coated-gloves-m-nitrile-60vy82-pr

 Nitrilite 93-311 is a clean nitrile glove with low levels
of ionic content and particles - for reliable product
protection. Designed for use in Class 100 / ISO 5
Cleanroom Environments.
Compatible with Class 100 (ISO 5)
Low levels of ionic content and particles for
excellent product protection 

Nitrilite 93-311 is a clean nitrile glove with low levels of ionic content and particles - for reliable product protection. Designed for use in Class 100 / ISO 5 Cleanroom Environments. Compatible with Class 100 (ISO 5) Low levels of ionic content and particles for excellent product protection

&nbsp;Nitrilite 93-311 is a clean nitrile glove with low levels 
of ionic content and particles - for reliable product 
protection. Designed for use in Class 100 / ISO 5 
Cleanroom Environments. 
Compatible with Class 100 (ISO 5) 
Low levels of ionic content and particles for 
excellent product protection&nbsp;

QUEBEE SAFETY

SYSBEL

Dupont Tyvek

Safeware

Tempshield

E+E Electronik

Dailove

Respiratory Protection

Fall Protection

Body Protection

Safety Goggles

Hazmat

Workplace Safety

Safety Shoes

Key Cabinets & Letter Boxes

Bags, Filters & Accessories

Ken Ning

AE-93-311-M Nitrilite Nitrile Glove Sz: M (50 PAIRS/PACKET)

ae-93-311-m nitrilite nitrile glove sz: (50 pairs/packet) sarung tangan nitrilit ukuran: pasang/paket) safety gloves keselamatan ansell nitril ansell/安塞尔 丁腈手套 尺码：m（50 双/包） 安全手套 安塞尔

ae-93-311-m-nitrilite-nitrile-glove-sz-m-50-pairs-packet

WORKSAFE NITRILE MICROFOAM PALM COATED NYLON LINER HEAT-RESISTANT GLOVES

Heat-Resistant Engineered Nitrile Gloves.

Nitrile latex gloves that offer mild heat protection

For use during work that involves handling heat objects

Certified with EN388:2016 (4, 1, 2, 1, X) and EN420:2003+A1:2009

Tested with EN407:2020 (X, 1, X, X, X, X)

*Able to withstand 100 Degree Celsius for 15 seconds

<h2 class="md-block-header-two">WORKSAFE NITRILE MICROFOAM PALM COATED NYLON LINER HEAT-RESISTANT GLOVES</h2>Heat-Resistant Engineered Nitrile Gloves.<ul class="md-block-unordered-list-item"><li>High abrasion resistance</li><li>Nitrile latex gloves that offer mild heat protection</li><li>For use during work that involves handling heat objects</li><li>Compatible with touch screen</li><li>Certified with EN388:2016 (4, 1, 2, 1, X) and EN420:2003+A1:2009</li><li>Tested with EN407:2020 (X, 1, X, X, X, X)</li></ul>*Able to withstand 100 Degree Celsius for 15 seconds <figure class="md-block-image"><img src="https://storage.googleapis.com/eezee-product-images/7dKbewSlwjsdFSKpwFip1d.png" alt="" /><figcaption class="md-block-image-caption"></figcaption></figure><figure class="md-block-image"><img src="https://storage.googleapis.com/eezee-product-images/yNlz_cQyf4M18EO7GO~oeO.png" alt="" /><figcaption class="md-block-image-caption"></figcaption></figure>

<h2>WORKSAFE NITRILE MICROFOAM PALM COATED NYLON LINER HEAT-RESISTANT GLOVES</h2>
Heat-Resistant Engineered Nitrile Gloves.
<ul>
<li>High abrasion resistance</li>
<li>Nitrile latex gloves that offer mild heat protection</li>
<li>For use during work that involves handling heat objects</li>
<li>Compatible with touch screen</li>
<li>Certified with EN388:2016 (4, 1, 2, 1, X) and EN420:2003+A1:2009</li>
<li>Tested with EN407:2020 (X, 1, X, X, X, X)</li>
</ul>
*Able to withstand 100 Degree Celsius for 15 seconds


 <div class="img-ctnr">
 <amp-img 
 on="tap:govb"
 tabindex="0"
 role="button"
 class="contain"
 layout="fill"
 src="https://storage.googleapis.com/eezee-product-images/7dKbewSlwjsdFSKpwFip1d.png"
 ></amp-img>
 </div>
 
 <amp-image-lightbox 
 id="govb" 
 layout="nodisplay"></amp-image-lightbox>

 

 <div class="img-ctnr">
 <amp-img 
 on="tap:4ul98"
 tabindex="0"
 role="button"
 class="contain"
 layout="fill"
 src="https://storage.googleapis.com/eezee-product-images/yNlz_cQyf4M18EO7GO~oeO.png"
 ></amp-img>
 </div>
 
 <amp-image-lightbox 
 id="4ul98" 
 layout="nodisplay"></amp-image-lightbox>

brian

NEW PIG

Bata Industrials

MASTER LOCK

Martor

NEUKING

Workgard

Slice

Padlocks & Lockout Devices

Protective Suits

Cutters

Eileen Soh

Worksafe N888 Nitrile Microfoam Palm Coated Heat-Resistant Gloves, Cut 1 Sz 8

worksafe n888 nitrile microfoam palm coated heat-resistant gloves, cut sz sarung tangan tahan panas coated, potong safety gloves keselamatan bersalut panas, worksafe/工作安全 丁腈微泡沫棕榈涂层耐热手套，剪裁 尺寸 安全手套 工作安全