Lumberg Automation

OMEGA

Electrical Connectors

electrical-connectors

Circular Connectors

circular-connectors

Mechanical Parts

mechanical-parts

O Ring

o-ring

Sensors & Transducers

sensors-transducers

Sensor Connectors

sensor-connectors

Thermocouple Extension Wires & Accessories

thermocouple-extension-wires-accessories

MULTICOMP PRO

Analog Devices

MULTICOMP

WIHA

Pro Power

Duratool

Tenma

Hakko

TR Fastenings

Surface Mount Resistors

Multilayer Ceramic Capacitors

DC-DC Converters

Through Hole Resistors

Operational Amplifiers

Analogue to Digital Converters

Transceiver

Digital to Analogue Converters

Development Boards

Junction & Enclosure Box

Element14

buyerIntroduction

Omega EXTT-K-24-50 Tc Wire, Type Kx, 24AWG, 15.24M

omega extt-k-24-50 tc wire, type kx, 24awg, 15.24m kawat tc, tipe 15,24m thermocouple extension wires accessories wayar jenis omega/欧米茄 电线，kx 型，24awg，15.24 欧米茄

omega-extt-k-24-50-tc-wire-type-kx-24awg-15-24m

Omega EXPP-K-20S-50 Tc Wire, Type Kx, 20AWG, 15.24M

omega expp-k-20s-50 tc wire, type kx, 20awg, 15.24m kawat tc, tipe 15,24m thermocouple extension wires accessories wayar jenis omega/欧米茄 电线，kx 型，20awg，15.24 欧米茄

omega-expp-k-20s-50-tc-wire-type-kx-20awg-15-24m

Lumberg Automation 934851079 RST 5L-950/20 M M12 Power Single-Ended Cordset: Male, Straight, 5-pin(4+FE), L-coded, Blue Body, 50 V AC/60 V Dc, 16 A; Pur Grey Cable, 2.50 Mm²

Ambient Temperature (Operation): -40 °C to +125 °C (notice derating)

Protection Degree / IP Rating: IP65, IP67, IP69K

Pollution Degree: 3 (acc. to DIN EN 60664-1)

Clearance / Creepage Distance: DIN EN 60664-1 (2008/01)

Overvoltage Category: III (acc. to DIN EN 60664-1)

Flammability Class (Contact Bearer): UL 94 V-2

Flammability Class (Molded Body): UL 94 HB

Fastening Torque (Contact Screw): M 12x1: (60-65) Ncm, hand-tight

Minimal Bending Radius (Fixed Installation): ˃ 4 x D

Minimal Bending Radius (Flexible Installation): ˃ 7.5 x D

Ambient Temperature (Fixed Installation): -40 °C to +90 °C (UL AWM 80°C)

Ambient Temperature (Flexible Installation): -30 °C to +90 °C (UL AWM 80°C)

Ambient Temperature (Fixed Installation Short-Term 100h): -40 °C to +125 °C

Ambient Temperature (Drag Chain Installation): -20 °C to +60 °C

Flammability Class (Cable Jacket): VDE 0482-332-1-2, DIN EN 60332-1-2 / IEC 60332-1 / UL VW-1, CSA FT1

Oil Resistance: HD 22.10 Appendix A, DIN EN 60811-404

Protection Degree / IP Rating Note: Only if mounted and locked in combination with Hirschmann / Lumberg Automation connector

<h3 class="md-block-header-three">Lumberg Automation 934851079 RST 5L-950/20 M M12 Power Single-Ended Cordset: Male, Straight, 5-pin(4+FE), L-coded, Blue Body, 50 V AC/60 V Dc, 16 A; Pur Grey Cable, 2.50 Mm²</h3>Cable length: 20 m <ul class="md-block-unordered-list-item"><li>Power Connector</li><li>Product Sub Family: M12 Power</li><li>Connector Type: Cordset, single ended</li><li>Type of Contact / Gender: Male</li><li>Connector Design: Straight</li><li>Number of Pins: 5 (4+FE)</li><li>Coding: L</li><li>Shielding: Unshielded</li><li>Attachment Type: Coupling Screw</li><li>Rated Voltage: 63 V</li><li>Rated Voltage (UL): 63 V</li><li>Rated Impulse Voltage: 1.5 kV</li><li>Operating Voltage: 50 V AC / 60 V DC</li><li>Rated Current: 16 A</li><li>Rated Current (UL): 16 A</li><li>Contact Resistance: ≤ 10 mOhm</li><li>Insulation Resistance: ˃ 10^9 Ohm</li><li>Mating Cycles: ≤ 100</li><li>Ambient Temperature (Operation): -40 °C to +125 °C (notice derating)</li><li>Protection Degree / IP Rating: IP65, IP67, IP69K</li><li>Design Standard: IEC 61076-2-111</li><li>Pollution Degree: 3 (acc. to DIN EN 60664-1)</li><li>Clearance / Creepage Distance: DIN EN 60664-1 (2008/01)</li><li>Overvoltage Category: III (acc. to DIN EN 60664-1)</li></ul>Materials<ul class="md-block-unordered-list-item"><li>Contact Base Material: CuNi</li><li>Contact Plating: Cu/Au</li><li>Contact Bearer Material: PBT GF</li><li>Contact Bearer Color: Grey</li><li>Flammability Class (Contact Bearer): UL 94 V-2</li><li>Molded Body Material: TPE</li><li>Molded Body Color: Blue</li><li>Flammability Class (Molded Body): UL 94 HB</li><li>Attachment Material: CuZn</li><li>Attachment Plating: Cu/Ni</li><li>O-Ring Material: FKM</li></ul>Circuitry<ul class="md-block-unordered-list-item"><li>Fastening Torque (Contact Screw): M 12x1: (60-65) Ncm, hand-tight</li></ul>Cable Data<ul class="md-block-unordered-list-item"><li>Cable Number: 950</li><li>Conductor Size: 2.5 mm²</li><li>Number of Wires: 5</li><li>Minimal Bending Radius (Fixed Installation): ˃ 4 x D</li><li>Minimal Bending Radius (Flexible Installation): ˃ 7.5 x D</li><li>Cycles (Bending): ˃ 10 M</li><li>Conductor Material: Cu</li><li>Cable Jacket Material: PUR</li><li>Cable Jacket Color: Grey (RAL 7032)</li><li>Cable Diameter: ø 9.8 ±0.20 mm</li><li>Wire Insulation Material: PP</li><li>Insulated Wire Diameter: ø 2.9 mm</li><li>Ambient Temperature (Fixed Installation): -40 °C to +90 °C (UL AWM 80°C)</li><li>Ambient Temperature (Flexible Installation): -30 °C to +90 °C (UL AWM 80°C)</li><li>Ambient Temperature (Fixed Installation Short-Term 100h): -40 °C to +125 °C</li><li>Ambient Temperature (Drag Chain Installation): -20 °C to +60 °C</li><li>UL Cable Type: AWM: 20939</li><li>Flammability Class (Cable Jacket): VDE 0482-332-1-2, DIN EN 60332-1-2 / IEC 60332-1 / UL VW-1, CSA FT1</li></ul>Approvals<ul class="md-block-unordered-list-item"><li>UL File: E497237</li><li>UL: UL 2237; cULus</li></ul>Safety &amp; Environmental Compliance<ul class="md-block-unordered-list-item"><li>RoHS Compliant: Yes</li><li>Halogen-Free: DIN VDE 0472 T.815</li><li>Oil Resistance: HD 22.10 Appendix A, DIN EN 60811-404</li></ul>Notes<ul class="md-block-unordered-list-item"><li>Derating Notice: Notice derating</li><li>Protection Degree / IP Rating Note: Only if mounted and locked in combination with Hirschmann / Lumberg Automation connector</li></ul>

<h3>Lumberg Automation 934851079 RST 5L-950/20 M M12 Power Single-Ended Cordset: Male, Straight, 5-pin(4+FE), L-coded, Blue Body, 50 V AC/60 V Dc, 16 A; Pur Grey Cable, 2.50 Mm²</h3>
Cable length: 20 m&nbsp;
<ul>
<li>Power Connector</li>
<li>Product Sub Family: M12 Power</li>
<li>Connector Type: Cordset, single ended</li>
<li>Type of Contact / Gender: Male</li>
<li>Connector Design: Straight</li>
<li>Number of Pins: 5 (4+FE)</li>
<li>Coding: L</li>
<li>Shielding: Unshielded</li>
<li>Attachment Type: Coupling Screw</li>
<li>Rated Voltage: 63 V</li>
<li>Rated Voltage (UL): 63 V</li>
<li>Rated Impulse Voltage: 1.5 kV</li>
<li>Operating Voltage: 50 V AC / 60 V DC</li>
<li>Rated Current: 16 A</li>
<li>Rated Current (UL): 16 A</li>
<li>Contact Resistance: ≤ 10 mOhm</li>
<li>Insulation Resistance: ˃ 10^9 Ohm</li>
<li>Mating Cycles: ≤ 100</li>
<li>Ambient Temperature (Operation): -40 °C to +125 °C (notice derating)</li>
<li>Protection Degree / IP Rating: IP65, IP67, IP69K</li>
<li>Design Standard: IEC 61076-2-111</li>
<li>Pollution Degree: 3 (acc. to DIN EN 60664-1)</li>
<li>Clearance / Creepage Distance: DIN EN 60664-1 (2008/01)</li>
<li>Overvoltage Category: III (acc. to DIN EN 60664-1)</li>
</ul>
Materials
<ul>
<li>Contact Base Material: CuNi</li>
<li>Contact Plating: Cu/Au</li>
<li>Contact Bearer Material: PBT GF</li>
<li>Contact Bearer Color: Grey</li>
<li>Flammability Class (Contact Bearer): UL 94 V-2</li>
<li>Molded Body Material: TPE</li>
<li>Molded Body Color: Blue</li>
<li>Flammability Class (Molded Body): UL 94 HB</li>
<li>Attachment Material: CuZn</li>
<li>Attachment Plating: Cu/Ni</li>
<li>O-Ring Material: FKM</li>
</ul>
Circuitry
<ul>
<li>Fastening Torque (Contact Screw): M 12x1: (60-65) Ncm, hand-tight</li>
</ul>
Cable Data
<ul>
<li>Cable Number: 950</li>
<li>Conductor Size: 2.5 mm²</li>
<li>Number of Wires: 5</li>
<li>Minimal Bending Radius (Fixed Installation): ˃ 4 x D</li>
<li>Minimal Bending Radius (Flexible Installation): ˃ 7.5 x D</li>
<li>Cycles (Bending): ˃ 10 M</li>
<li>Conductor Material: Cu</li>
<li>Cable Jacket Material: PUR</li>
<li>Cable Jacket Color: Grey (RAL 7032)</li>
<li>Cable Diameter: ø 9.8 ±0.20 mm</li>
<li>Wire Insulation Material: PP</li>
<li>Insulated Wire Diameter: ø 2.9 mm</li>
<li>Ambient Temperature (Fixed Installation): -40 °C to +90 °C (UL AWM 80°C)</li>
<li>Ambient Temperature (Flexible Installation): -30 °C to +90 °C (UL AWM 80°C)</li>
<li>Ambient Temperature (Fixed Installation Short-Term 100h): -40 °C to +125 °C</li>
<li>Ambient Temperature (Drag Chain Installation): -20 °C to +60 °C</li>
<li>UL Cable Type: AWM: 20939</li>
<li>Flammability Class (Cable Jacket): VDE 0482-332-1-2, DIN EN 60332-1-2 / IEC 60332-1 / UL VW-1, CSA FT1</li>
</ul>
Approvals
<ul>
<li>UL File: E497237</li>
<li>UL: UL 2237; cULus</li>
</ul>
Safety &amp; Environmental Compliance
<ul>
<li>RoHS Compliant: Yes</li>
<li>Halogen-Free: DIN VDE 0472 T.815</li>
<li>Oil Resistance: HD 22.10 Appendix A, DIN EN 60811-404</li>
</ul>
Notes
<ul>
<li>Derating Notice: Notice derating</li>
<li>Protection Degree / IP Rating Note: Only if mounted and locked in combination with Hirschmann / Lumberg Automation connector</li>
</ul>

Hirschmann

Belden

Network Switches

Networking Products

Ethernet Cable

Fieldbus Repeaters

IT Cables

DIN Rail Power Supplies

Computer Supplies

Network Routers

 Data Diodes

Optical Bypass Relays

LHS ELECTRONICS

lumberg automation 934851079 rst 5l-950/20 m12 power single-ended cordset: male, straight, 5-pin(4+fe), l-coded, blue body, 50 ac/60 dc, 16 a; pur grey cable, 2.50 mm² kabel abu-abu pur, 2,50 circular connectors automasi kuasa kord satu hujung: lelaki, lurus, berkod l, badan biru, grey, lumberg/隆堡 电源单端线组：公头，直型，5 针（4+fe），l 编码，蓝色主体，50 dc，16 a；纯灰色电缆，2.50 隆堡自动化

lumberg-automation-934851079-rst-5l-950-20-m-m12-power-single-ended-cordset-male-straight-5-pin-4-fe-l-coded-blue-body-50-v-ac-60-v-dc-16-a-pur-grey-cable-2-50-mm

Lumberg Automation 790 RSWT 4-225/3 M M12 Standard Sensor/Actuator Single-Ended Cordset: Male, Angled, 4-pin, A-coded, Translucent Body, 230 V AC/DC, 4 A; Pur Black Cable, 4-wires, 0.34 Mm²

Product Family: Sensor / Actuator Connectors

Ambient Temperature (Operation): -40 °C to +90 °C

Protection Degree / IP Rating: IP65, IP67, IP68 (1 m / 24 h), IP69K

Pollution Degree: 3 acc. to DIN EN 60664-1 (VDE 0110-1)

Overvoltage Category: II acc. to DIN EN 60664-1 (VDE 0110-1)

Flammability Class (Contact Bearer): UL 94 HB

Fastening Torque (Attachment): M 12x1: (50-60) Ncm, hand-tight

Minimal Bending Radius (Fixed Inst): ˃ 5 x D

Minimal Bending Radius (Flexible Inst): ˃ 10 x D

Cable Jacket Color: Black matte, similar to RAL 9005

Insulated Wire Diameter: Ø 1.30 ± 0.10 mm

Ambient Temperature (Fixed Installation): -50 °C to +90 °C (UL: +80 °C)

Ambient Temperature (Flex Installation): -25 °C to +90 °C (UL: +80 °C)

Ambient Temperature (Drag Chain Inst): -25 °C to +60 °C

Flammability Class (Cable Jacket): DIN EN 60332-2-2, VDE 0482-332-2-2, IEC 60332-2-2, CSA FT-2

Cable Characteristics: Good microbes and hydrolysis resistance; Mainly plasticizer diffusion free; Exclusion of PVC and silicone; Coldness flexibility; Free of lacquer wetting disturbing substances

Halogenfree: DIN EN 50267-2-1, IEC 60754-1, VDE 0482-267-2-1

Protection Degree / IP Rating Note: Only if mounted and locked in combination with Hirschmann / Lumberg Automation connector.

General Note: Do not connect or disconnect under load.

<h3 class="md-block-header-three">Lumberg Automation 790 RSWT 4-225/3 M M12 Standard Sensor/Actuator Single-Ended Cordset: Male, Angled, 4-pin, A-coded, Translucent Body, 230 V AC/DC, 4 A; Pur Black Cable, 4-wires, 0.34 Mm²</h3>cable length: 3 m <ul class="md-block-unordered-list-item"><li>Product Family: Sensor / Actuator Connectors</li><li>Product Sub Family: M12 Standard</li><li>Connector Type: Cordset, single ended</li><li>Type of Contact / Gender: Male</li><li>Connector Design: Angled</li><li>Number of Pins: 4</li><li>Coding: A</li><li>Shielding: Unshielded</li><li>Attachment Type: Coupling Screw</li><li>Rated Voltage: 250 V</li><li>Rated Voltage (UL): 250 V AC</li><li>Rated Impulse Voltage: 2.5 kV</li><li>Operating Voltage: 230 V AC/DC</li><li>Rated Current: 4 A</li><li>Rated Current (UL): 4 A</li><li>Contact Resistance: ≤ 10 mOhm</li><li>Insulation Resistance: ˃ 10^9 Ohm</li><li>Mating Cycles: ≤ 100</li><li>Ambient Temperature (Operation): -40 °C to +90 °C</li><li>Operating Temperature (UL): Max. +50 °C</li><li>Protection Degree / IP Rating: IP65, IP67, IP68 (1 m / 24 h), IP69K</li><li>Design Standard: IEC 61076-2-101</li><li>Pollution Degree: 3 acc. to DIN EN 60664-1 (VDE 0110-1)</li><li>Overvoltage Category: II acc. to DIN EN 60664-1 (VDE 0110-1)</li></ul>Materials<ul class="md-block-unordered-list-item"><li>Contact Base Material: CuSn</li><li>Contact Plating: Cu/Au</li><li>Contact Bearer Material: TPU</li><li>Contact Bearer Color: Orange</li><li>Flammability Class (Contact Bearer): UL 94 HB</li><li>Molded Body Material: TPU</li><li>Molded Body Color: Translucent</li><li>Flammability Class (Molded Body): UL 94 HB</li><li>Attachment Material: CuZn</li><li>Attachment Plating: Nickel-plated</li></ul>Circuitry<ul class="md-block-unordered-list-item"><li>Fastening Torque (Attachment): M 12x1: (50-60) Ncm, hand-tight</li></ul>Cable Data<ul class="md-block-unordered-list-item"><li>Cable Number: 225</li><li>Conductor Size: 0.34 mm²</li><li>Number of Wires: 4</li><li>Minimal Bending Radius (Fixed Inst): ˃ 5 x D</li><li>Minimal Bending Radius (Flexible Inst): ˃ 10 x D</li><li>Cycles (Bending): ˃ 5 M</li><li>Cycles (Torsion): ˃ 5 M @ ± 360 °/1 m</li><li>Conductor Material: Cu</li><li>Cable Jacket Material: PUR</li><li>Cable Jacket Color: Black matte, similar to RAL 9005</li><li>Cable Diameter D: Ø 4.70 ± 0.15 mm</li><li>Wire Insulation Material: PP</li><li>Insulated Wire Diameter: Ø 1.30 ± 0.10 mm</li><li>Ambient Temperature (Fixed Installation): -50 °C to +90 °C (UL: +80 °C)</li><li>Ambient Temperature (Flex Installation): -25 °C to +90 °C (UL: +80 °C)</li><li>Ambient Temperature (Drag Chain Inst): -25 °C to +60 °C</li><li>UL Cable Type: AWM: 20549</li><li>Flammability Class (Cable Jacket): DIN EN 60332-2-2, VDE 0482-332-2-2, IEC 60332-2-2, CSA FT-2</li><li>Cable Characteristics: Good microbes and hydrolysis resistance; Mainly plasticizer diffusion free; Exclusion of PVC and silicone; Coldness flexibility; Free of lacquer wetting disturbing substances</li></ul>Approvals<ul class="md-block-unordered-list-item"><li>UL-File: E315587</li><li>UL: UL 2238; cURus</li></ul>Safety &amp; Environmental Compliance<ul class="md-block-unordered-list-item"><li>RoHS Compliant: Yes</li></ul>Resistances<ul class="md-block-unordered-list-item"><li>Halogenfree: DIN EN 50267-2-1, IEC 60754-1, VDE 0482-267-2-1</li></ul>Notes<ul class="md-block-unordered-list-item"><li>Note Derating: Notice derating</li><li>Protection Degree / IP Rating Note: Only if mounted and locked in combination with Hirschmann / Lumberg Automation connector.</li><li>General Note: Do not connect or disconnect under load.</li></ul>

<h3>Lumberg Automation 790 RSWT 4-225/3 M M12 Standard Sensor/Actuator Single-Ended Cordset: Male, Angled, 4-pin, A-coded, Translucent Body, 230 V AC/DC, 4 A; Pur Black Cable, 4-wires, 0.34 Mm²</h3>
cable length: 3 m&nbsp;
<ul>
<li>Product Family: Sensor / Actuator Connectors</li>
<li>Product Sub Family: M12 Standard</li>
<li>Connector Type: Cordset, single ended</li>
<li>Type of Contact / Gender: Male</li>
<li>Connector Design: Angled</li>
<li>Number of Pins: 4</li>
<li>Coding: A</li>
<li>Shielding: Unshielded</li>
<li>Attachment Type: Coupling Screw</li>
<li>Rated Voltage: 250 V</li>
<li>Rated Voltage (UL): 250 V AC</li>
<li>Rated Impulse Voltage: 2.5 kV</li>
<li>Operating Voltage: 230 V AC/DC</li>
<li>Rated Current: 4 A</li>
<li>Rated Current (UL): 4 A</li>
<li>Contact Resistance: ≤ 10 mOhm</li>
<li>Insulation Resistance: ˃ 10^9 Ohm</li>
<li>Mating Cycles: ≤ 100</li>
<li>Ambient Temperature (Operation): -40 °C to +90 °C</li>
<li>Operating Temperature (UL): Max. +50 °C</li>
<li>Protection Degree / IP Rating: IP65, IP67, IP68 (1 m / 24 h), IP69K</li>
<li>Design Standard: IEC 61076-2-101</li>
<li>Pollution Degree: 3 acc. to DIN EN 60664-1 (VDE 0110-1)</li>
<li>Overvoltage Category: II acc. to DIN EN 60664-1 (VDE 0110-1)</li>
</ul>
Materials
<ul>
<li>Contact Base Material: CuSn</li>
<li>Contact Plating: Cu/Au</li>
<li>Contact Bearer Material: TPU</li>
<li>Contact Bearer Color: Orange</li>
<li>Flammability Class (Contact Bearer): UL 94 HB</li>
<li>Molded Body Material: TPU</li>
<li>Molded Body Color: Translucent</li>
<li>Flammability Class (Molded Body): UL 94 HB</li>
<li>Attachment Material: CuZn</li>
<li>Attachment Plating: Nickel-plated</li>
</ul>
Circuitry
<ul>
<li>Fastening Torque (Attachment): M 12x1: (50-60) Ncm, hand-tight</li>
</ul>
Cable Data
<ul>
<li>Cable Number: 225</li>
<li>Conductor Size: 0.34 mm²</li>
<li>Number of Wires: 4</li>
<li>Minimal Bending Radius (Fixed Inst): ˃ 5 x D</li>
<li>Minimal Bending Radius (Flexible Inst): ˃ 10 x D</li>
<li>Cycles (Bending): ˃ 5 M</li>
<li>Cycles (Torsion): ˃ 5 M @ ± 360 °/1 m</li>
<li>Conductor Material: Cu</li>
<li>Cable Jacket Material: PUR</li>
<li>Cable Jacket Color: Black matte, similar to RAL 9005</li>
<li>Cable Diameter D: Ø 4.70 ± 0.15 mm</li>
<li>Wire Insulation Material: PP</li>
<li>Insulated Wire Diameter: Ø 1.30 ± 0.10 mm</li>
<li>Ambient Temperature (Fixed Installation): -50 °C to +90 °C (UL: +80 °C)</li>
<li>Ambient Temperature (Flex Installation): -25 °C to +90 °C (UL: +80 °C)</li>
<li>Ambient Temperature (Drag Chain Inst): -25 °C to +60 °C</li>
<li>UL Cable Type: AWM: 20549</li>
<li>Flammability Class (Cable Jacket): DIN EN 60332-2-2, VDE 0482-332-2-2, IEC 60332-2-2, CSA FT-2</li>
<li>Cable Characteristics: Good microbes and hydrolysis resistance; Mainly plasticizer diffusion free; Exclusion of PVC and silicone; Coldness flexibility; Free of lacquer wetting disturbing substances</li>
</ul>
Approvals
<ul>
<li>UL-File: E315587</li>
<li>UL: UL 2238; cURus</li>
</ul>
Safety &amp; Environmental Compliance
<ul>
<li>RoHS Compliant: Yes</li>
</ul>
Resistances
<ul>
<li>Halogenfree: DIN EN 50267-2-1, IEC 60754-1, VDE 0482-267-2-1</li>
</ul>
Notes
<ul>
<li>Note Derating: Notice derating</li>
<li>Protection Degree / IP Rating Note: Only if mounted and locked in combination with Hirschmann / Lumberg Automation connector.</li>
<li>General Note: Do not connect or disconnect under load.</li>
</ul>

lumberg automation 790 rswt 4-225/3 m12 standard sensor/actuator single-ended cordset: male, angled, 4-pin, a-coded, translucent body, 230 ac/dc, a; pur black cable, 4-wires, 0.34 mm² kabel hitam pur, 4-kawat, 0,34 sensor connectors automasi penderia/penggerak piawai kord berakhir tunggal: lelaki, bersudut, berkod a, badan lutsinar, black, wayar, lumberg/隆堡 标准传感器/执行器单端线组：公头，斜角，4 针，a 编码，半透明主体，230 ac/dc，4 a；纯黑色电缆，4 线，0.34 隆堡自动化

lumberg-automation-790-rswt-4-225-3-m-m12-standard-sensor-actuator-single-ended-cordset-male-angled-4-pin-a-coded-translucent-body-230-v-ac-dc-4-a-pur-black-cable-4-wires-0-34-mm

Nitrile is often referred to Buna (Buna-N) and NBR.

Nitrile elastomer being affordable is a common material widely used in the industry where sealing take place using O-Ring. It is popular in the industry due to it ability to withstand a wide range of temperature ranging from (-30`C to 100`C). 

It has excellent resistance to petroleum application, it is rated good in the Gas impermeability. In addition Nitrile material are one of the best in its compression and abrasion resistance. The only down side of Nitrile have a poor ozone and weather resistance and only moderate resistance to high temperature.

However Nitrile are not a restricting factors in many applications.

Overview on Application Rating for Material Nitrile (NBR) 

Other than the size and material type, there is one final option that you need to take in consideration. And that is the Durometer. Durometer are being classify as an industry standard to measure the elastomer hardness. Durometer is measured and listed in accordance with Shore A scale. Typical standard hardness for the elastomer are 70 shore, 75 shore and 90 shore to choose from depending on the material that you are using. The higher the value of the shore indicates that the material you are using is harder.Durometer is also generally stated and accepted with a “+/- 5” tolerance.

O-Rings and rubber seals are generally used for:

· Applications that require resistance to OIL

· Applications that are required to work in low temperatures (-0°C)

· High performance Fuel systems that requires strictly no leakage

O-rings need to be installed properly for a perfect fit and sealing. It is important that you install the O-ring in a prescribed manner to ensure your application continues to function properly. You will also ensure you increase the life of the application.

The process of installing an O-ring into a male gland is an intricate affair that should be carefully undertaken. Glide it along the shaft so as it reaches the gland. At that point, it should easily snap into place. Simple as it might sound, a number of steps will ensure that the O-ring doesn’t get damaged.

If you want to install an O-ring correctly and within a short time, here are steps to follow:

· Covering and lubricating the threading of the shaft

The threading of the shaft has the potential of tearing the rubber seal. Cover the threads using a masking tape and then lubricate them to allow for easy passage of the O-ring. The aim is to have the O-ring slide through without getting torn.

That’s a tip that will save you the stress of a torn O-ring. In fact, running the O-ring over jagged or sharp objects could get it torn. You may not be able to notice some of these tears. That’s why you should ensure you prevent them from occurring in the first place.

You will have to stretch the O-ring over the shaft. Ensure you do it evenly. Pulling from one side is a no-no. If anything, you should stretch the O-ring as little as possible. You will not just get a tighter grip but added security too.

Instead of rolling the O-ring down the shaft, slide it. If you spiral wind or roll an O-ring, it cannot be properly installed. It will also not function optimally and can even end up being damaged. If you have a lubricant, apply it on the O-ring and you will keep it rolling.

Place the female component in a manner that allows its radius to go around the corner. This should be done when you are finalizing the installation process. Ensure the lead of this component is inside the chamfer. This is how you will be able to guarantee the safety of the O-ring.

For O-rings to perform optimally, they have to be properly installed. It doesn’t just provide secure sealing but also increases the service life of the component together with the application. Don’t compromise on this process.

ORING JIS B2401 G475 ID 474.30 x CS 5.70Material : Nitrile (NBR) 70 Shore Nitrile is often referred to Buna (Buna-N) and NBR.Nitrile elastomer being affordable is a common material widely used in the industry where sealing take place using O-Ring. It is popular in the industry due to it ability to withstand a wide range of temperature ranging from (-30&#x60;C to 100&#x60;C). It has excellent resistance to petroleum application, it is rated good in the Gas impermeability. In addition Nitrile material are one of the best in its compression and abrasion resistance. The only down side of Nitrile have a poor ozone and weather resistance and only moderate resistance to high temperature.However Nitrile are not a restricting factors in many applications.Temperature RangeLow : -22&#x60;F / -30&#x60;C High: 212&#x60;F / 100&#x60;COverview on Application Rating for Material Nitrile (NBR) Properties ( Rating )Oils &amp; Grease - GoodTear Strength - GoodFuel Resistance - PoorGas impermeability - GoodCompression - ExcellentAbrasion Resistance - Good Other than the size and material type, there is one final option that you need to take in consideration. And that is the Durometer. Durometer are being classify as an industry standard to measure the elastomer hardness. Durometer is measured and listed in accordance with Shore A scale. Typical standard hardness for the elastomer are 70 shore, 75 shore and 90 shore to choose from depending on the material that you are using. The higher the value of the shore indicates that the material you are using is harder.Durometer is also generally stated and accepted with a “+/- 5” tolerance.Primary UsageO-Rings and rubber seals are generally used for:· Applications that require resistance to OIL· Applications that are required to work in low temperatures (-0°C)· High performance Fuel systems that requires strictly no leakage<ul class="md-block-unordered-list-item"><li>Aircrafts</li><li>Marine Ships</li><li>F1 Cars</li></ul>· General Industrial Use Tips for installation of an O-ringO-rings need to be installed properly for a perfect fit and sealing. It is important that you install the O-ring in a prescribed manner to ensure your application continues to function properly. You will also ensure you increase the life of the application.So how do you install an O-ring?The process of installing an O-ring into a male gland is an intricate affair that should be carefully undertaken. Glide it along the shaft so as it reaches the gland. At that point, it should easily snap into place. Simple as it might sound, a number of steps will ensure that the O-ring doesn’t get damaged.If you want to install an O-ring correctly and within a short time, here are steps to follow:· Covering and lubricating the threading of the shaftThe threading of the shaft has the potential of tearing the rubber seal. Cover the threads using a masking tape and then lubricate them to allow for easy passage of the O-ring. The aim is to have the O-ring slide through without getting torn.· Don’t force it over sharp cornersThat’s a tip that will save you the stress of a torn O-ring. In fact, running the O-ring over jagged or sharp objects could get it torn. You may not be able to notice some of these tears. That’s why you should ensure you prevent them from occurring in the first place.· Even stretchingYou will have to stretch the O-ring over the shaft. Ensure you do it evenly. Pulling from one side is a no-no. If anything, you should stretch the O-ring as little as possible. You will not just get a tighter grip but added security too.· Don’t roll it down the shaftInstead of rolling the O-ring down the shaft, slide it. If you spiral wind or roll an O-ring, it cannot be properly installed. It will also not function optimally and can even end up being damaged. If you have a lubricant, apply it on the O-ring and you will keep it rolling.· Finishing it offPlace the female component in a manner that allows its radius to go around the corner. This should be done when you are finalizing the installation process. Ensure the lead of this component is inside the chamfer. This is how you will be able to guarantee the safety of the O-ring.For O-rings to perform optimally, they have to be properly installed. It doesn’t just provide secure sealing but also increases the service life of the component together with the application. Don’t compromise on this process.Installation Guide<figure class="md-block-image"><img src="https://storage.googleapis.com/eezee-product-images/vaJoWmkxDp_vpf5CxGtNm2.png" alt="" /><figcaption className="md-block-image-caption"></figcaption></figure>

ORING JIS B2401 G475
&nbsp;ID 474.30 x CS 5.70
Material : Nitrile (NBR) 70 Shore
&nbsp;&nbsp;
Nitrile is often referred to Buna (Buna-N) and NBR.
Nitrile elastomer being affordable is a common material widely used in the industry where sealing take place using O-Ring. It is popular in the industry due to it ability to withstand a wide range of temperature ranging from (-30`C to 100`C).&nbsp;
It has excellent resistance to petroleum application, it is rated good in the Gas impermeability. In addition Nitrile material are one of the best in its compression and abrasion resistance. The only down side of Nitrile have a poor ozone and weather resistance and only moderate resistance to high temperature.
However Nitrile are not a restricting factors in many applications.
<ins>Temperature Range</ins>
Low : -22`F / -30`C High: 212`F / 100`C
<ins>Overview on Application Rating for Material Nitrile (NBR) </ins>
Properties ( Rating )
Oils &amp; Grease - Good
Tear Strength - Good
Fuel Resistance - Poor
Gas impermeability - Good
Compression - Excellent
Abrasion Resistance - Good&nbsp;
Other than the size and material type, there is one final option that you need to take in consideration. And that is the Durometer. Durometer are being classify as an industry standard to measure the elastomer hardness. Durometer is measured and listed in accordance with Shore A scale. Typical standard hardness for the elastomer are 70 shore, 75 shore and 90 shore to choose from depending on the material that you are using. The higher the value of the shore indicates that the material you are using is harder.Durometer is also generally stated and accepted with a “+/- 5” tolerance.
<ins>Primary Usage</ins>
O-Rings and rubber seals are generally used for:
· Applications that require resistance to OIL
· Applications that are required to work in low temperatures (-0°C)
· High performance Fuel systems that requires strictly no leakage
<ul>
<li>Aircrafts</li>
<li>Marine Ships</li>
<li>F1 Cars</li>
</ul>
· General Industrial Use&nbsp;
<ins>Tips for installation of an O-ring</ins>
O-rings need to be installed properly for a perfect fit and sealing. It is important that you install the O-ring in a prescribed manner to ensure your application continues to function properly. You will also ensure you increase the life of the application.
<ins>So how do you install an O-ring?</ins>
The process of installing an O-ring into a male gland is an intricate affair that should be carefully undertaken. Glide it along the shaft so as it reaches the gland. At that point, it should easily snap into place. Simple as it might sound, a number of steps will ensure that the O-ring doesn’t get damaged.
If you want to install an O-ring correctly and within a short time, here are steps to follow:
· Covering and lubricating the threading of the shaft
The threading of the shaft has the potential of tearing the rubber seal. Cover the threads using a masking tape and then lubricate them to allow for easy passage of the O-ring. The aim is to have the O-ring slide through without getting torn.
· Don’t force it over sharp corners
That’s a tip that will save you the stress of a torn O-ring. In fact, running the O-ring over jagged or sharp objects could get it torn. You may not be able to notice some of these tears. That’s why you should ensure you prevent them from occurring in the first place.
· Even stretching
You will have to stretch the O-ring over the shaft. Ensure you do it evenly. Pulling from one side is a no-no. If anything, you should stretch the O-ring as little as possible. You will not just get a tighter grip but added security too.
· Don’t roll it down the shaft
Instead of rolling the O-ring down the shaft, slide it. If you spiral wind or roll an O-ring, it cannot be properly installed. It will also not function optimally and can even end up being damaged. If you have a lubricant, apply it on the O-ring and you will keep it rolling.
· Finishing it off
Place the female component in a manner that allows its radius to go around the corner. This should be done when you are finalizing the installation process. Ensure the lead of this component is inside the chamfer. This is how you will be able to guarantee the safety of the O-ring.
For O-rings to perform optimally, they have to be properly installed. It doesn’t just provide secure sealing but also increases the service life of the component together with the application. Don’t compromise on this process.
<ins>Installation Guide</ins>

 <div class="img-ctnr">
 <amp-img 
 on="tap:4r7e5"
 tabindex="0"
 role="button"
 class="contain"
 layout="fill"
 src="https://storage.googleapis.com/eezee-product-images/vaJoWmkxDp_vpf5CxGtNm2.png"
 ></amp-img>
 </div>
 
 <amp-image-lightbox 
 id="4r7e5" 
 layout="nodisplay"></amp-image-lightbox>