Continental

Iwata

RS Pro

Mechanical Parts

mechanical-parts

O Ring

o-ring

Mechanical Power Transmissions

mechanical-power-transmissions

Vee-Belts

vee-belts

Fasteners

fasteners

Washers

washers

Shim Ring, Inner Diameter 47mm X Outer Diameter 55mm, Pack of 10 (Available in Brass, Carbon Steel and 304 Stainless Steel)

Shim Rings, also known as Shim Washers, are available in various thickness to align gaps and uneven surfaces. Shim washers look similar to flat washers, but are different in their usage and purpose.

Produced in Japan, these are made to extremely precise tolerances and are free from burrs. We are able to offer shim washers in different materials such as Brass, Carbon Steel (SPCC) and 304 stainless steel.

Use them for screws, axles, bearing faces and machine bases. Depending on the material, thickness variants range from 0.01mm to 1mm. Each package contains 10 pcs of the same thickness in the above given inner diameter and outer diameter sizes.

Shim washers and flat washers are inherently different in their purpose and tolerances. Here are three differences that set shim washers apart from flat washers.

They serve a different purpose in life. While flat washers are used for fastening, load distribution and surface protection, shim washers are used for gap alignment. Flat washers are usually used together with screws, bolts or nuts. While shim washers can be used in the same way, they can be slotted into threaded screws or axles to carry out their job.

Based on DIN125A standard, flat washers are produced with nominal dimensions with no tolerance values given. Our flat washers are supplied with the understanding that the thickness variance will range from 0 to 0.2mm. For example, an M3 flat washer will have thickness ranging from 0.4mm to 0.6mm, even in the same batch!

Shim washers are produced to close tolerances, usually up to 0.2mm for ID and OD, and as small as +/-0.02mm for thickness. 

In short, shim washers are more precise than flat washers because they have to be. During gap alignment or leveling, minor differences in thickness and diameters must be taken into account for fear of misalignment. 

Flat washers usually have a single thickness based on a given ID and OD. For example, an M3 flat washer with ID 3.2mm and OD 6mm will have thickness 0.4mm. If you are lucky (or not), you might find some with 0.5mm in the same batch. Not reassuring? Not to worry, being used for fastening, the thickness of flat washers is usually not a focal point.

Product Description: Shim Ring (Also known as Shim Washer)

Manufacturer: Iwata Manufacturing Co., Ltd

Materials: Carbon Steel (SPCC), Brass and 304 Stainless Steel

<h3 class="md-block-header-three">Shim Ring, Inner Diameter 47mm X Outer Diameter 55mm, Pack of 10 (Available in Brass, Carbon Steel and 304 Stainless Steel)</h3>Shim Rings, also known as Shim Washers, are available in various thickness to align gaps and uneven surfaces. Shim washers look similar to flat washers, but are different in their usage and purpose.Produced in Japan, these are made to extremely precise tolerances and are free from burrs. We are able to offer shim washers in different materials such as Brass, Carbon Steel (SPCC) and 304 stainless steel.Use them for screws, axles, bearing faces and machine bases. Depending on the material, thickness variants range from 0.01mm to 1mm. Each package contains 10 pcs of the same thickness in the above given inner diameter and outer diameter sizes.Shim washers and flat washers are inherently different in their purpose and tolerances. Here are three differences that set shim washers apart from flat washers.Purpose And UsageThey serve a different purpose in life. While flat washers are used for fastening, load distribution and surface protection, shim washers are used for gap alignment. Flat washers are usually used together with screws, bolts or nuts. While shim washers can be used in the same way, they can be slotted into threaded screws or axles to carry out their job.TolerancesBased on DIN125A standard, flat washers are produced with nominal dimensions with no tolerance values given. Our flat washers are supplied with the understanding that the thickness variance will range from 0 to 0.2mm. For example, an M3 flat washer will have thickness ranging from 0.4mm to 0.6mm, even in the same batch!Shim washers are produced to close tolerances, usually up to 0.2mm for ID and OD, and as small as +/-0.02mm for thickness. In short, shim washers are more precise than flat washers because they have to be. During gap alignment or leveling, minor differences in thickness and diameters must be taken into account for fear of misalignment. Available ThicknessFlat washers usually have a single thickness based on a given ID and OD. For example, an M3 flat washer with ID 3.2mm and OD 6mm will have thickness 0.4mm. If you are lucky (or not), you might find some with 0.5mm in the same batch. Not reassuring? Not to worry, being used for fastening, the thickness of flat washers is usually not a focal point.Product Description: Shim Ring (Also known as Shim Washer)Manufacturer: Iwata Manufacturing Co., LtdMaterials: Carbon Steel (SPCC), Brass and 304 Stainless SteelID: 47mmOD: 55mmThickness: 0.01mm to 1mm.Quantity Per Package: 10 pcsCountry of Origin: Japan

<h3>Shim Ring, Inner Diameter 47mm X Outer Diameter 55mm, Pack of 10 (Available in Brass, Carbon Steel and 304 Stainless Steel)</h3>
Shim Rings, also known as Shim Washers, are available in various thickness to align gaps and uneven surfaces. Shim washers look similar to flat washers, but are different in their usage and purpose.
Produced in Japan, these are made to extremely precise tolerances and are free from burrs. We are able to offer shim washers in different materials such as Brass, Carbon Steel (SPCC) and 304 stainless steel.
Use them for screws, axles, bearing faces and machine bases. Depending on the material, thickness variants range from 0.01mm to 1mm. Each package contains 10 pcs of the same thickness in the above given inner diameter and outer diameter sizes.
Shim washers and flat washers are inherently different in their purpose and tolerances. Here are three differences that set shim washers apart from flat washers.
Purpose And Usage
They serve a different purpose in life. While flat washers are used for fastening, load distribution and surface protection, shim washers are used for gap alignment. Flat washers are usually used together with screws, bolts or nuts. While shim washers can be used in the same way, they can be slotted into threaded screws or axles to carry out their job.
Tolerances
Based on DIN125A standard, flat washers are produced with nominal dimensions with no tolerance values given. Our flat washers are supplied with the understanding that the thickness variance will range from 0 to 0.2mm. For example, an M3 flat washer will have thickness ranging from 0.4mm to 0.6mm, even in the same batch!
Shim washers are produced to close tolerances, usually up to 0.2mm for ID and OD, and as small as +/-0.02mm for thickness. 
In short, shim washers are more precise than flat washers because they have to be. During gap alignment or leveling, minor differences in thickness and diameters must be taken into account for fear of misalignment. 
Available Thickness
Flat washers usually have a single thickness based on a given ID and OD. For example, an M3 flat washer with ID 3.2mm and OD 6mm will have thickness 0.4mm. If you are lucky (or not), you might find some with 0.5mm in the same batch. Not reassuring? Not to worry, being used for fastening, the thickness of flat washers is usually not a focal point.
Product Description: Shim Ring (Also known as Shim Washer)
Manufacturer: Iwata Manufacturing Co., Ltd
Materials: Carbon Steel (SPCC), Brass and 304 Stainless Steel
ID: 47mm
OD: 55mm
Thickness: 0.01mm to 1mm.
Quantity Per Package: 10 pcs
Country of Origin: Japan

Precision Brand

Ergomat

Southco

Others

DYMON

SCRUBS

IT Accessories

Machinery Accessories

Screw

Ball Bearings

Painting Tools

Hooks & Eyes

Drill Bits & Drill Bit Sets

Rubber Seals

Other Tools

Hose Clamp

Leland

buyerIntroduction

Iwata Shim Ring, Inner Diameter 47mm X Outer Diameter 55mm, Pack of 10

iwata shim ring, inner diameter 47mm outer 55mm, pack 10 cincin iwata, dalam luar kemasan washers pek iwata/岩田 垫片环，内径 47 毫米 外径 55 毫米，10 个一包 岩田

iwata-shim-ring-inner-diameter-47mm-x-outer-diameter-55mm-pack-of-10

Carbon Steel ID 47mm x OD 55mm x 0.10mm PN RF047055010, Pack of 10 Pieces

Carbon Steel ID 47mm x OD 55mm x 0.15mm PN RF047055015, Pack of 10 Pieces

Carbon Steel ID 47mm x OD 55mm x 0.20mm PN RF047055020, Pack of 10 Pieces

Carbon Steel ID 47mm x OD 55mm x 0.30mm PN RF047055030, Pack of 10 Pieces

Carbon Steel ID 47mm x OD 55mm x 0.50mm PN RF047055050, Pack of 10 Pieces

Carbon Steel ID 47mm x OD 55mm x 1mm PN RF047055100, Pack of 10 Pieces

Brass ID 47mm x OD 55mm x 0.05mm PN RB047055005, Pack of 10 Pieces

Brass ID 47mm x OD 55mm x 0.10mm PN RB047055010, Pack of 10 Pieces

Brass ID 47mm x OD 55mm x 0.15mm PN RB047055015, Pack of 10 Pieces

Brass ID 47mm x OD 55mm x 0.20mm PN RB047055020, Pack of 10 Pieces

Brass ID 47mm x OD 55mm x 0.30mm PN RB047055030, Pack of 10 Pieces

Brass ID 47mm x OD 55mm x 0.50mm PN RB0047055050, Pack of 10 Pieces

Brass ID 47mm x OD 55mm x 1mm PN RB047055100, Pack of 10 Pieces

304 SST ID 47mm x OD 55mm x 0.01mm PN RS047055001, Pack of 10 Pieces

304 SST ID 47mm x OD 55mm x 0.02mm PN RS047055002, Pack of 10 Pieces

304 SST ID 47mm x OD 55mm x 0.03mm PN RS047055003, Pack of 10 Pieces

304 SST ID 47mm x OD 55mm x 0.05mm PN RS047055005, Pack of 10 Pieces

304 SST ID 47mm x OD 55mm x 0.10mm PN RS047055010, Pack of 10 Pieces

304 SST ID 47mm x OD 55mm x 0.15mm PN RS047055015, Pack of 10 Pieces

304 SST ID 47mm x OD 55mm x 0.20mm PN RS047055020, Pack of 10 Pieces

304 SST ID 47mm x OD 55mm x 0.30mm PN RS047055030, Pack of 10 Pieces

304 SST ID 47mm x OD 55mm x 0.50mm PN RS047055050, Pack of 10 Pieces

304 SST ID 47mm x OD 55mm x 1mm PN RS047055100, Pack of 10 Pieces

Material

RS PRO Datasheet

RS PRO O-Rings Overview

PHOENIX CONTACT

Mag-Lite

Facom

Wago

Kimberly Clark

HEICO

Plugs & Connector 

Panel Mount Indicators 

Clamps

Indicator Lights

Ethernet Cable

Bolts

Electrical Wire 

Fuses & Fusegear

RS Components ETH SG

Rs Pro 2556510 Fkm O-Ring, 47mm Bore, 57mm Outer Diameter (1 Bag of 2)

rs pro 2556510 fkm o-ring, 47mm bore, 57mm outer diameter (1 bag 2) lubang 47mm, luar kantong isi ring o-ring bore beg gelang 型圈，47 毫米内径，57 毫米外径（1 个） o型圈 rs专业版

rs-pro-2556510-fkm-o-ring-47mm-bore-57mm-outer-diameter-1-bag-of-2

Rs Pro 2557015 Nitrile O-Ring, 38mm Bore, 47mm Outer Diameter (1 Bag of 20)

rs pro 2557015 nitrile o-ring, 38mm bore, 47mm outer diameter (1 bag 20) nitril lubang 38mm, luar kantong isi ring o-ring cincin nitril, bor beg gelang 丁腈 形圈，38 毫米内径，47 毫米外径（1 20 个） o型圈 rs专业版

rs-pro-2557015-nitrile-o-ring-38mm-bore-47mm-outer-diameter-1-bag-of-20

Silicone O-Rings are sometimes referred to VMQ O-Rings.

Silicone elastomers are an excellent material due to its outstanding resistance to extreme range of temperature ranging from (-59`C to 232`C) and it has good retention of compression and flexibility. 

In addition Silicone perform excellent resistance to ozone, oxygen, moisture and water swell. Last of all, Silicone has and produces very low odour and taste elastomer therefore making it the right material to be used in food and beverage, and medical industry.

Overview on Application Rating for Material Silicone 

Heat Ozone & Aging Resistance - Excellent

Other than the size and material type, there is one final option that you need to take in consideration. And that is the Durometer. Durometer are being classified as an industry standard to measure the elastomer hardness. Durometer is measured and listed in accordance with “Shore A” scale. Typical standard hardness for the elastomer are 70 shore, 75 shore and 90 shore to choose from depending on the material that you are using. The higher the value of the shore indicates that the material you are using is harder. Durometer is also generally stated and accepted with a “+/- 5” tolerance. Silicone O-Rings the standard nominal durometer is 70 Shore.

O-Rings and rubber seals are generally used for:

· Applications that require resistance to OIL

· Applications that are required to work in low temperatures (-0°C)

· High performance Fuel systems that requires strictly no leakage

O-rings need to be installed properly for a perfect fit and sealing. It is important that you install the O-ring in a prescribed manner to ensure your application continues to function properly. You will also ensure you increase the life of the application.

The process of installing an O-ring into a male gland is an intricate affair that should be carefully undertaken. Glide it along the shaft so as it reaches the gland. At that point, it should easily snap into place. Simple as it might sound, a number of steps will ensure that the O-ring doesn’t get damaged.

If you want to install an O-ring correctly and within a short time, here are steps to follow:

· Covering and lubricating the threading of the shaft

The threading of the shaft has the potential of tearing the rubber seal. Cover the threads using a masking tape and then lubricate them to allow for easy passage of the O-ring. The aim is to have the O-ring slide through without getting torn.

That’s a tip that will save you the stress of a torn O-ring. In fact, running the O-ring over jagged or sharp objects could get it torn. You may not be able to notice some of these tears. That’s why you should ensure you prevent them from occurring in the first place.

You will have to stretch the O-ring over the shaft. Ensure you do it evenly. Pulling from one side is a no-no. If anything, you should stretch the O-ring as little as possible. You will not just get a tighter grip but added security too.

Instead of rolling the O-ring down the shaft, slide it. If you spiral wind or roll an O-ring, it cannot be properly installed. It will also not function optimally and can even end up being damaged. If you have a lubricant, apply it on the O-ring and you will keep it rolling.

Place the female component in a manner that allows its radius to go around the corner. This should be done when you are finalizing the installation process. Ensure the lead of this component is inside the chamfer. This is how you will be able to guarantee the safety of the O-ring.

For O-rings to perform optimally, they have to be properly installed. It doesn’t just provide secure sealing but also increases the service life of the component together with the application. Don’t compromise on this process.

ORING AS568 AS452 ID 291.47 X CS 6.99Material : Silicone 70 Shore Additional InformationSilicone O-Rings are sometimes referred to VMQ O-Rings.Silicone elastomers are an excellent material due to its outstanding resistance to extreme range of temperature ranging from (-59&#x60;C to 232&#x60;C) and it has good retention of compression and flexibility. In addition Silicone perform excellent resistance to ozone, oxygen, moisture and water swell. Last of all, Silicone has and produces very low odour and taste elastomer therefore making it the right material to be used in food and beverage, and medical industry.Temperature Range (Dry Heat)Low: -75&#x60;F / -59&#x60;C High: 450&#x60;F / 232&#x60;COverview on Application Rating for Material Silicone Properties (Rating)Oils &amp; Grease - FairTear Strength – PoorFuel Resistance - PoorHeat Ozone &amp; Aging Resistance - ExcellentWater Swell Resistance - ExcellentAbrasion Resistance - PoorOther than the size and material type, there is one final option that you need to take in consideration. And that is the Durometer. Durometer are being classified as an industry standard to measure the elastomer hardness. Durometer is measured and listed in accordance with “Shore A” scale. Typical standard hardness for the elastomer are 70 shore, 75 shore and 90 shore to choose from depending on the material that you are using. The higher the value of the shore indicates that the material you are using is harder. Durometer is also generally stated and accepted with a “+/- 5” tolerance. Silicone O-Rings the standard nominal durometer is 70 Shore.Primary UsageO-Rings and rubber seals are generally used for:· Applications that require resistance to OIL· Applications that are required to work in low temperatures (-0°C)· High performance Fuel systems that requires strictly no leakage<ul class="md-block-unordered-list-item"><li>Aircrafts</li><li>Marine Ships</li><li>F1 Cars</li></ul>· General Industrial Use Tips for installation of an O-ringO-rings need to be installed properly for a perfect fit and sealing. It is important that you install the O-ring in a prescribed manner to ensure your application continues to function properly. You will also ensure you increase the life of the application.So how do you install an O-ring?The process of installing an O-ring into a male gland is an intricate affair that should be carefully undertaken. Glide it along the shaft so as it reaches the gland. At that point, it should easily snap into place. Simple as it might sound, a number of steps will ensure that the O-ring doesn’t get damaged.If you want to install an O-ring correctly and within a short time, here are steps to follow:· Covering and lubricating the threading of the shaftThe threading of the shaft has the potential of tearing the rubber seal. Cover the threads using a masking tape and then lubricate them to allow for easy passage of the O-ring. The aim is to have the O-ring slide through without getting torn.· Don’t force it over sharp cornersThat’s a tip that will save you the stress of a torn O-ring. In fact, running the O-ring over jagged or sharp objects could get it torn. You may not be able to notice some of these tears. That’s why you should ensure you prevent them from occurring in the first place.· Even stretchingYou will have to stretch the O-ring over the shaft. Ensure you do it evenly. Pulling from one side is a no-no. If anything, you should stretch the O-ring as little as possible. You will not just get a tighter grip but added security too.· Don’t roll it down the shaftInstead of rolling the O-ring down the shaft, slide it. If you spiral wind or roll an O-ring, it cannot be properly installed. It will also not function optimally and can even end up being damaged. If you have a lubricant, apply it on the O-ring and you will keep it rolling.· Finishing it offPlace the female component in a manner that allows its radius to go around the corner. This should be done when you are finalizing the installation process. Ensure the lead of this component is inside the chamfer. This is how you will be able to guarantee the safety of the O-ring.For O-rings to perform optimally, they have to be properly installed. It doesn’t just provide secure sealing but also increases the service life of the component together with the application. Don’t compromise on this process.Installation Guide<figure class="md-block-image"><img src="https://storage.googleapis.com/eezee-product-images/mdY4W2uAgoUw~3vIhPRGx4.png" alt="" /><figcaption className="md-block-image-caption"></figcaption></figure>

ORING AS568 AS452
&nbsp;ID 291.47 X CS 6.99
Material : Silicone 70 Shore&nbsp;&nbsp;&nbsp;&nbsp;
&nbsp;&nbsp;
<ins>Additional Information</ins>
Silicone O-Rings are sometimes referred to VMQ O-Rings.
Silicone elastomers are an excellent material due to its outstanding resistance to extreme range of temperature ranging from (-59`C to 232`C) and it has good retention of compression and flexibility.&nbsp;
In addition Silicone perform excellent resistance to ozone, oxygen, moisture and water swell. Last of all, Silicone has and produces very low odour and taste elastomer therefore making it the right material to be used in food and beverage, and medical industry.
<ins>Temperature Range (Dry Heat)</ins>
Low: -75`F / -59`C High: 450`F / 232`C
<ins>Overview on Application Rating for Material Silicone </ins>
Properties (Rating)
Oils &amp; Grease - Fair
Tear Strength – Poor
Fuel Resistance - Poor
Heat Ozone &amp; Aging Resistance - Excellent
Water Swell Resistance - Excellent
Abrasion Resistance - Poor
Other than the size and material type, there is one final option that you need to take in consideration. And that is the Durometer. Durometer are being classified as an industry standard to measure the elastomer hardness. Durometer is measured and listed in accordance with “Shore A” scale. Typical standard hardness for the elastomer are 70 shore, 75 shore and 90 shore to choose from depending on the material that you are using. The higher the value of the shore indicates that the material you are using is harder. Durometer is also generally stated and accepted with a “+/- 5” tolerance. Silicone O-Rings the standard nominal durometer is 70 Shore.
<ins>Primary Usage</ins>
O-Rings and rubber seals are generally used for:
· Applications that require resistance to OIL
· Applications that are required to work in low temperatures (-0°C)
· High performance Fuel systems that requires strictly no leakage
<ul>
<li>Aircrafts</li>
<li>Marine Ships</li>
<li>F1 Cars</li>
</ul>
· General Industrial Use&nbsp;
<ins>Tips for installation of an O-ring</ins>
O-rings need to be installed properly for a perfect fit and sealing. It is important that you install the O-ring in a prescribed manner to ensure your application continues to function properly. You will also ensure you increase the life of the application.
<ins>So how do you install an O-ring?</ins>
The process of installing an O-ring into a male gland is an intricate affair that should be carefully undertaken. Glide it along the shaft so as it reaches the gland. At that point, it should easily snap into place. Simple as it might sound, a number of steps will ensure that the O-ring doesn’t get damaged.
If you want to install an O-ring correctly and within a short time, here are steps to follow:
· Covering and lubricating the threading of the shaft
The threading of the shaft has the potential of tearing the rubber seal. Cover the threads using a masking tape and then lubricate them to allow for easy passage of the O-ring. The aim is to have the O-ring slide through without getting torn.
· Don’t force it over sharp corners
That’s a tip that will save you the stress of a torn O-ring. In fact, running the O-ring over jagged or sharp objects could get it torn. You may not be able to notice some of these tears. That’s why you should ensure you prevent them from occurring in the first place.
· Even stretching
You will have to stretch the O-ring over the shaft. Ensure you do it evenly. Pulling from one side is a no-no. If anything, you should stretch the O-ring as little as possible. You will not just get a tighter grip but added security too.
· Don’t roll it down the shaft
Instead of rolling the O-ring down the shaft, slide it. If you spiral wind or roll an O-ring, it cannot be properly installed. It will also not function optimally and can even end up being damaged. If you have a lubricant, apply it on the O-ring and you will keep it rolling.
· Finishing it off
Place the female component in a manner that allows its radius to go around the corner. This should be done when you are finalizing the installation process. Ensure the lead of this component is inside the chamfer. This is how you will be able to guarantee the safety of the O-ring.
For O-rings to perform optimally, they have to be properly installed. It doesn’t just provide secure sealing but also increases the service life of the component together with the application. Don’t compromise on this process.
<ins>Installation Guide</ins>

 <div class="img-ctnr">
 <amp-img 
 on="tap:1c6da"
 tabindex="0"
 role="button"
 class="contain"
 layout="fill"
 src="https://storage.googleapis.com/eezee-product-images/mdY4W2uAgoUw~3vIhPRGx4.png"
 ></amp-img>
 </div>
 
 <amp-image-lightbox 
 id="1c6da" 
 layout="nodisplay"></amp-image-lightbox>

John

Optibelt

Gates

SAMTECH

VITON

V Rings

Oil Seals

Shaft Couplings

Plumbing Tools & Equipment

Hydraulic Seals

Wall Plugs, Anchors, Fixings & Kits

ORING AS568 AS452 ID 291.47 X CS 6.99 Silicone 70 Shore

oring as568 as452 id 291.47 cs 6.99 silicone 70 shore silikon ring o-ring oem gelang oem/oem代工 6.99硅胶70肖氏 o型圈 oem代工

oring-as568-as452-id-291-47-x-cs-6-99-silicone-70-shore

Grainger

Continental 63VX475 Banded Cogged V-Belt 6/3VX475 47in

continental 63vx475 banded cogged v-belt 6/3vx475 47in sabuk bergerigi berpita vee-belts vee berjalur v-tali pinggang talipinggang 齿形 形皮带 47 英寸 v型皮带 大陆航空