Band-It

Precision Brand

SCHNEIDER ELECTRIC

Fasteners

fasteners

Cable Ties

cable-ties

Electricals

electricals

Enclosure Canopies

enclosure-canopies

Plumbing & Sanitary

plumbing-sanitary

Hose Clamp

hose-clamp

Construction

construction

Shim

shim

Wall Boxes

wall-boxes

Precision Brand® precut slotted shims are made from a 300 series stainless steel that resists rust and corrosion. Precut shims have tabs that makes shim placement easier and safer, while eliminating the need to place hands under the machinery during installation or removal of shim. Each 2 Inch x 2 Inch motor shim has a slot size of 16mm and can be used for bolt sizes up to a maximum of 5/8 Inch. Each shim is marked with thickness in metric. Precision Brand® slotted shim is the best way to solve alignment and leveling problems on motors, pumps, generators, and other plant machinery. Precut slotted shims are economical, safe, and accurate. Reduce labor costs by eliminating hand cutting and reduce downtime by eliminating shim preparation. 

Precut slotted shims save money. Precuts decrease time and labor costs and ultimately reduce machine downtime. Precuts also eliminate the work involved in the hand cutting, flattening and deburring of shim stock. Precision Brand Slotted Shim is made of a corrosive resistant, stainless steel. These shims are made with a tab which allows for safe and easy installation and removal. 

Any manufacturing plant that has numerous pumps and motors, which are maintained on a routine schedule, will benefit from them. Paper mills, refineries, utilities, food processors and large OEMs have experienced cost savings by using precut slotted shims. Industries that have developed predictive maintenance programs (using laser alignment and/or vibration analysis equipment) have found both time and cost savings with precut slotted shims. 

What competitive advantage does Precision Brand® Slotted Shim offer?

Precision Brand realizes that quality and thickness tolerances are the two most important considerations when manufacturing shims. PBP publishes and guarantees thickness tolerances that are tighter than any other shim on the market and that are superior to the industry standards. Our material is produced using special gauge charts that require special millruns. This assures your customers of the tightest tolerances and the highest quality when using Precision Brand®. 

Why are thickness tolerances so important?

Think about it. If you are using precision alignment equipment to determine the soft foot (gap) under a motor foot, you will want to install shims that are as close as possible to that gap’s thickness. With our guaranteed thickness they will be “right-on” when you do that final check. This will save time of having to do another measurement rotation.

Aren’t all precut slotted shims marked with an “actual” thickness?

No, the thickness marked on most shims is just nominally close. Nominally close can be defined as whatever thickness tolerance is acceptable to that manufacturer. This means that the thickness can vary considerably from what is marked on the shim. Using Precision Brand® shims gives your customers the advantage. Remember that PBP is the only shim manufacturer to publish and guarantee slotted shim tolerances.

What about shims that claim to be marked with an “exact” thickness like .098 instead of .100?

There are two things to remember when working with these shims. First, the off-size marking is probably not correct due to the variations that occur in the stainless steel rolling process. The only way this marking could be correct would be if each shim was measured and stamped individually. As you can realize, this is neither feasible nor economically possible for any shim manufacturer. Beware whenever you encounter a shim with a non-standard, “off-size” decimal thickness. Remember that these shims were originally intended to be “on-size” and ended up “off-size”. Second, when stacking numerous shims to make a shim pack, it is much easier to think in terms of “on-size”, closer tolerance shims. To illustrate this, let’s do two math problems:

Solve for X: 20+20+20+20+X=100 (on-size shims) OR Solve for X: 22+19+20+19+X=100 (off-size shims)

Working with “on-size” shims eliminates the time spent searching for that “perfect combination”.

How do I know that I am getting the best?

Prove it to yourself. Mic your shims with a micrometer or a caliper to determine the thickness (especially .050 and thicker!). Make sure to check in more than one spot to look for consistency throughout the shim. Compare these findings to what the shim is labeled. While you are checking, also look for burrs and crown (non-flatness). These two conditions can create false readings in the equipment that will lead to wasted shimming time. Put Precision Brand Slotted Shim to the test and I am sure that you will find it to be the best!

Thickness 0.001, 0.002, 0.003, 0.004, 0.005, 0.010, 0.015, 0.020, 0.025, 0.050, 0.075, 0.100 and 0.125 Inch

Quantity Per Package: 260 Pieces (20 pieces for each thickness)

Precision Brand® precut slotted shims are made from a 300 series stainless steel that resists rust and corrosion. Precut shims have tabs that makes shim placement easier and safer, while eliminating the need to place hands under the machinery during installation or removal of shim. Each 2 Inch x 2 Inch motor shim has a slot size of 16mm and can be used for bolt sizes up to a maximum of 5/8 Inch. Each shim is marked with thickness in metric. Precision Brand® slotted shim is the best way to solve alignment and leveling problems on motors, pumps, generators, and other plant machinery. Precut slotted shims are economical, safe, and accurate. Reduce labor costs by eliminating hand cutting and reduce downtime by eliminating shim preparation. Precut slotted shims save money. Precuts decrease time and labor costs and ultimately reduce machine downtime. Precuts also eliminate the work involved in the hand cutting, flattening and deburring of shim stock. Precision Brand Slotted Shim is made of a corrosive resistant, stainless steel. These shims are made with a tab which allows for safe and easy installation and removal. Any manufacturing plant that has numerous pumps and motors, which are maintained on a routine schedule, will benefit from them. Paper mills, refineries, utilities, food processors and large OEMs have experienced cost savings by using precut slotted shims. Industries that have developed predictive maintenance programs (using laser alignment and/or vibration analysis equipment) have found both time and cost savings with precut slotted shims. What competitive advantage does Precision Brand® Slotted Shim offer?Precision Brand realizes that quality and thickness tolerances are the two most important considerations when manufacturing shims. PBP publishes and guarantees thickness tolerances that are tighter than any other shim on the market and that are superior to the industry standards. Our material is produced using special gauge charts that require special millruns. This assures your customers of the tightest tolerances and the highest quality when using Precision Brand®. Why are thickness tolerances so important?Think about it. If you are using precision alignment equipment to determine the soft foot (gap) under a motor foot, you will want to install shims that are as close as possible to that gap’s thickness. With our guaranteed thickness they will be “right-on” when you do that final check. This will save time of having to do another measurement rotation.Aren’t all precut slotted shims marked with an “actual” thickness?No, the thickness marked on most shims is just nominally close. Nominally close can be defined as whatever thickness tolerance is acceptable to that manufacturer. This means that the thickness can vary considerably from what is marked on the shim. Using Precision Brand® shims gives your customers the advantage. Remember that PBP is the only shim manufacturer to publish and guarantee slotted shim tolerances.What about shims that claim to be marked with an “exact” thickness like .098 instead of .100?There are two things to remember when working with these shims. First, the off-size marking is probably not correct due to the variations that occur in the stainless steel rolling process. The only way this marking could be correct would be if each shim was measured and stamped individually. As you can realize, this is neither feasible nor economically possible for any shim manufacturer. Beware whenever you encounter a shim with a non-standard, “off-size” decimal thickness. Remember that these shims were originally intended to be “on-size” and ended up “off-size”. Second, when stacking numerous shims to make a shim pack, it is much easier to think in terms of “on-size”, closer tolerance shims. To illustrate this, let’s do two math problems:Solve for X: 20+20+20+20+X=100 (on-size shims) OR Solve for X: 22+19+20+19+X=100 (off-size shims)Working with “on-size” shims eliminates the time spent searching for that “perfect combination”.How do I know that I am getting the best?Prove it to yourself. Mic your shims with a micrometer or a caliper to determine the thickness (especially .050 and thicker!). Make sure to check in more than one spot to look for consistency throughout the shim. Compare these findings to what the shim is labeled. While you are checking, also look for burrs and crown (non-flatness). These two conditions can create false readings in the equipment that will lead to wasted shimming time. Put Precision Brand Slotted Shim to the test and I am sure that you will find it to be the best!Product Description: Precut Slotted ShimMaterial: 300 Series Stainless SteelSize: A (2 Inch x 2 Inch)Length A: 2 InchThickness 0.001, 0.002, 0.003, 0.004, 0.005, 0.010, 0.015, 0.020, 0.025, 0.050, 0.075, 0.100 and 0.125 InchGroove G: 5/8 InchFor Bolt Size: 5/8 UNC or UNFQuantity Per Package: 260 Pieces (20 pieces for each thickness)Packaging Weight: 4.96 kg

&nbsp;
Precision Brand® precut slotted shims are made from a 300 series stainless steel that resists rust and corrosion. Precut shims have tabs that makes shim placement easier and safer, while eliminating the need to place hands under the machinery during installation or removal of shim. Each 2 Inch x 2 Inch motor shim has a slot size of 16mm and can be used for bolt sizes up to a maximum of 5/8 Inch. Each shim is marked with thickness in metric. Precision Brand® slotted shim is the best way to solve alignment and leveling problems on motors, pumps, generators, and other plant machinery. Precut slotted shims are economical, safe, and accurate. Reduce labor costs by eliminating hand cutting and reduce downtime by eliminating shim preparation.&nbsp;
Precut slotted shims save money. Precuts decrease time and labor costs and ultimately reduce machine downtime. Precuts also eliminate the work involved in the hand cutting, flattening and deburring of shim stock. Precision Brand Slotted Shim is made of a corrosive resistant, stainless steel. These shims are made with a tab which allows for safe and easy installation and removal.&nbsp;
Any manufacturing plant that has numerous pumps and motors, which are maintained on a routine schedule, will benefit from them. Paper mills, refineries, utilities, food processors and large OEMs have experienced cost savings by using precut slotted shims. Industries that have developed predictive maintenance programs (using laser alignment and/or vibration analysis equipment) have found both time and cost savings with precut slotted shims.&nbsp;
What competitive advantage does Precision Brand® Slotted Shim offer?
Precision Brand realizes that quality and thickness tolerances are the two most important considerations when manufacturing shims. PBP publishes and guarantees thickness tolerances that are tighter than any other shim on the market and that are superior to the industry standards. Our material is produced using special gauge charts that require special millruns. This assures your customers of the tightest tolerances and the highest quality when using Precision Brand®.&nbsp;
Why are thickness tolerances so important?
Think about it. If you are using precision alignment equipment to determine the soft foot (gap) under a motor foot, you will want to install shims that are as close as possible to that gap’s thickness. With our guaranteed thickness they will be “right-on” when you do that final check. This will save time of having to do another measurement rotation.
Aren’t all precut slotted shims marked with an “actual” thickness?
No, the thickness marked on most shims is just nominally close. Nominally close can be defined as whatever thickness tolerance is acceptable to that manufacturer. This means that the thickness can vary considerably from what is marked on the shim. Using Precision Brand® shims gives your customers the advantage. Remember that PBP is the only shim manufacturer to publish and guarantee slotted shim tolerances.
What about shims that claim to be marked with an “exact” thickness like .098 instead of .100?
There are two things to remember when working with these shims. First, the off-size marking is probably not correct due to the variations that occur in the stainless steel rolling process. The only way this marking could be correct would be if each shim was measured and stamped individually. As you can realize, this is neither feasible nor economically possible for any shim manufacturer. Beware whenever you encounter a shim with a non-standard, “off-size” decimal thickness. Remember that these shims were originally intended to be “on-size” and ended up “off-size”. Second, when stacking numerous shims to make a shim pack, it is much easier to think in terms of “on-size”, closer tolerance shims. To illustrate this, let’s do two math problems:
Solve for X: 20+20+20+20+X=100 (on-size shims) OR Solve for X: 22+19+20+19+X=100 (off-size shims)
Working with “on-size” shims eliminates the time spent searching for that “perfect combination”.
How do I know that I am getting the best?
Prove it to yourself. Mic your shims with a micrometer or a caliper to determine the thickness (especially .050 and thicker!). Make sure to check in more than one spot to look for consistency throughout the shim. Compare these findings to what the shim is labeled. While you are checking, also look for burrs and crown (non-flatness). These two conditions can create false readings in the equipment that will lead to wasted shimming time. Put Precision Brand Slotted Shim to the test and I am sure that you will find it to be the best!
Product Description: Precut Slotted Shim
Material: 300 Series Stainless Steel
Size: A (2 Inch x 2 Inch)
Length A: 2 Inch
Thickness 0.001, 0.002, 0.003, 0.004, 0.005, 0.010, 0.015, 0.020, 0.025, 0.050, 0.075, 0.100 and 0.125 Inch
Groove G: 5/8 Inch
For Bolt Size: 5/8 UNC or UNF
Quantity Per Package: 260 Pieces (20 pieces for each thickness)
Packaging Weight: 4.96 kg

Iwata

Ergomat

Southco

Others

DYMON

SCRUBS

IT Accessories

Machinery Accessories

Screw

Ball Bearings

Painting Tools

Hooks & Eyes

Drill Bits & Drill Bit Sets

Rubber Seals

Other Tools

Leland

buyerIntroduction

Precut Slotted Shim "a" Full Kit, 2 Inch X 2 Inch, 300 Series Stainless Steel, 260 Pieces

precut slotted shim "a" full kit, inch inch, 300 series stainless steel, 260 pieces kit lengkap beralur prapotong "a", inci inci, baja tahan karat seri 300, buah precision brand penuh berslot keluli siri keping brand/精密品牌 预切开槽垫片“a”全套套件，2 英寸 英寸，300 系列不锈钢，260 精密品牌

precut-slotted-shim-a-full-kit-2-inch-x-2-inch-300-series-stainless-steel-260-pieces

Precut Slotted Shim B Full Kit, 3 Inch X 3 Inch, 300 Series Stainless Steel, 260 Pieces, 42910

Precut Slotted Shim C Full Kit, 4 Inch X 4 Inch, 300 Series Stainless Steel, 260 Pieces, 42920

Precut Slotted Shim D Full Kit, 5 Inch X 5 Inch, 300 Series Stainless Steel, 260 Pieces, 42930

Precut Slotted Shim A Full Kit, 2 Inch X 2 Inch, 300 Series Stainless Steel, 260 Pieces, 42900

Size

Precision Brand All 300 Series Stainless Worm Gear Hose Clamp 2-1/4inch B28HSP

The high quality 300 series 1/2 inch band and housing are matched with a 300 series 5/16 inch hex head screw. This clamp is highly corrosion resistant, well suited for marine applications and is low in magnetic permeability. Rounded edges to protect the hose. Efficient three-piece construction. Screws feature deep slots for quick installation. Precision Brand Standard Series Hose Clamps have 100% interlock construction.

One piece housing which directly locks into the band and spot weld free design

Easily installed with screwdriver, nut driver or socket wrench

Meets or exceeds SAE torque specifications

<h3 class="md-block-header-three">Precision Brand All 300 Series Stainless Worm Gear Hose Clamp 2-1/4inch B28HSP</h3>The high quality 300 series 1/2 inch band and housing are matched with a 300 series 5/16 inch hex head screw. This clamp is highly corrosion resistant, well suited for marine applications and is low in magnetic permeability. Rounded edges to protect the hose. Efficient three-piece construction. Screws feature deep slots for quick installation. Precision Brand Standard Series Hose Clamps have 100% interlock construction.<h3 class="md-block-header-three">Features:</h3><ul class="md-block-unordered-list-item"><li>One piece housing which directly locks into the band and spot weld free design</li><li>Easily installed with screwdriver, nut driver or socket wrench</li><li>Meets or exceeds SAE torque specifications</li></ul><h3 class="md-block-header-three">Specification:</h3><ul class="md-block-unordered-list-item"><li>Brand: Precision Brand</li><li>Product Type: Worm Gear Hose Clamp</li><li>Minimum Clamping Diameter: 1-5/16 inch</li><li>Maximum Clamping Diameter: 2-1/4 inch</li><li>SAE Sizes: 28</li><li>Material: 300 Series Stainless Steel</li><li>ORM-D: No</li><li>Quantity per Package: 10 Piece</li></ul>

<h3>Precision Brand All 300 Series Stainless Worm Gear Hose Clamp 2-1/4inch B28HSP</h3>
The high quality 300 series 1/2 inch band and housing are matched with a 300 series 5/16 inch hex head screw. This clamp is highly corrosion resistant, well suited for marine applications and is low in magnetic permeability. Rounded edges to protect the hose. Efficient three-piece construction. Screws feature deep slots for quick installation. Precision Brand Standard Series Hose Clamps have 100% interlock construction.
<h3>Features:</h3>
<ul>
<li>One piece housing which directly locks into the band and spot weld free design</li>
<li>Easily installed with screwdriver, nut driver or socket wrench</li>
<li>Meets or exceeds SAE torque specifications</li>
</ul>
<h3>Specification:</h3>
<ul>
<li>Brand: Precision Brand</li>
<li>Product Type: Worm Gear Hose Clamp</li>
<li>Minimum Clamping Diameter: 1-5/16 inch</li>
<li>Maximum Clamping Diameter: 2-1/4 inch</li>
<li>SAE Sizes: 28</li>
<li>Material: 300 Series Stainless Steel</li>
<li>ORM-D: No</li>
<li>Quantity per Package: 10 Piece</li>
</ul>

Leland Tan

precision brand 300 series stainless worm gear hose clamp 2-1/4inch b28hsp merek presisi semua seri cacing selang gigi penjepit 2-1 inch klem jenama 4inch pengapit hos brand/精密品牌 所有300系列不锈钢蜗轮软管夹2-1 精密品牌

precision-brand-all-300-series-stainless-worm-gear-hose-clamp-2-1-4inch-b28hsp

Quantity Per Package: 130 Pieces (10 pieces for each thickness)

Precision Brand® precut slotted shims are made from a 300 series stainless steel that resists rust and corrosion. Precut shims have tabs that makes shim placement easier and safer, while eliminating the need to place hands under the machinery during installation or removal of shim. Each 2 Inch x 2 Inch motor shim has a slot size of 16mm and can be used for bolt sizes up to a maximum of 5/8 Inch. Each shim is marked with thickness in metric. Precision Brand® slotted shim is the best way to solve alignment and leveling problems on motors, pumps, generators, and other plant machinery. Precut slotted shims are economical, safe, and accurate. Reduce labor costs by eliminating hand cutting and reduce downtime by eliminating shim preparation. Precut slotted shims save money. Precuts decrease time and labor costs and ultimately reduce machine downtime. Precuts also eliminate the work involved in the hand cutting, flattening and deburring of shim stock. Precision Brand Slotted Shim is made of a corrosive resistant, stainless steel. These shims are made with a tab which allows for safe and easy installation and removal. Any manufacturing plant that has numerous pumps and motors, which are maintained on a routine schedule, will benefit from them. Paper mills, refineries, utilities, food processors and large OEMs have experienced cost savings by using precut slotted shims. Industries that have developed predictive maintenance programs (using laser alignment and/or vibration analysis equipment) have found both time and cost savings with precut slotted shims. What competitive advantage does Precision Brand® Slotted Shim offer?Precision Brand realizes that quality and thickness tolerances are the two most important considerations when manufacturing shims. PBP publishes and guarantees thickness tolerances that are tighter than any other shim on the market and that are superior to the industry standards. Our material is produced using special gauge charts that require special millruns. This assures your customers of the tightest tolerances and the highest quality when using Precision Brand®. Why are thickness tolerances so important?Think about it. If you are using precision alignment equipment to determine the soft foot (gap) under a motor foot, you will want to install shims that are as close as possible to that gap’s thickness. With our guaranteed thickness they will be “right-on” when you do that final check. This will save time of having to do another measurement rotation.Aren’t all precut slotted shims marked with an “actual” thickness?No, the thickness marked on most shims is just nominally close. Nominally close can be defined as whatever thickness tolerance is acceptable to that manufacturer. This means that the thickness can vary considerably from what is marked on the shim. Using Precision Brand® shims gives your customers the advantage. Remember that PBP is the only shim manufacturer to publish and guarantee slotted shim tolerances.What about shims that claim to be marked with an “exact” thickness like .098 instead of .100?There are two things to remember when working with these shims. First, the off-size marking is probably not correct due to the variations that occur in the stainless steel rolling process. The only way this marking could be correct would be if each shim was measured and stamped individually. As you can realize, this is neither feasible nor economically possible for any shim manufacturer. Beware whenever you encounter a shim with a non-standard, “off-size” decimal thickness. Remember that these shims were originally intended to be “on-size” and ended up “off-size”. Second, when stacking numerous shims to make a shim pack, it is much easier to think in terms of “on-size”, closer tolerance shims. To illustrate this, let’s do two math problems:Solve for X: 20+20+20+20+X=100 (on-size shims) OR Solve for X: 22+19+20+19+X=100 (off-size shims)Working with “on-size” shims eliminates the time spent searching for that “perfect combination”.How do I know that I am getting the best?Prove it to yourself. Mic your shims with a micrometer or a caliper to determine the thickness (especially .050 and thicker!). Make sure to check in more than one spot to look for consistency throughout the shim. Compare these findings to what the shim is labeled. While you are checking, also look for burrs and crown (non-flatness). These two conditions can create false readings in the equipment that will lead to wasted shimming time. Put Precision Brand Slotted Shim to the test and I am sure that you will find it to be the best!Product Description: Precut Slotted ShimMaterial: 300 Series Stainless SteelSize: A (2 Inch x 2 Inch)Length A: 2 InchThickness 0.001, 0.002, 0.003, 0.004, 0.005, 0.010, 0.015, 0.020, 0.025, 0.050, 0.075, 0.100 and 0.125 InchGroove G: 5/8 InchFor Bolt Size: 5/8 UNC or UNFQuantity Per Package: 130 Pieces (10 pieces for each thickness)Packaging Weight: 3.09 kg

&nbsp;
Precision Brand® precut slotted shims are made from a 300 series stainless steel that resists rust and corrosion. Precut shims have tabs that makes shim placement easier and safer, while eliminating the need to place hands under the machinery during installation or removal of shim. Each 2 Inch x 2 Inch motor shim has a slot size of 16mm and can be used for bolt sizes up to a maximum of 5/8 Inch. Each shim is marked with thickness in metric. Precision Brand® slotted shim is the best way to solve alignment and leveling problems on motors, pumps, generators, and other plant machinery. Precut slotted shims are economical, safe, and accurate. Reduce labor costs by eliminating hand cutting and reduce downtime by eliminating shim preparation.&nbsp;
Precut slotted shims save money. Precuts decrease time and labor costs and ultimately reduce machine downtime. Precuts also eliminate the work involved in the hand cutting, flattening and deburring of shim stock. Precision Brand Slotted Shim is made of a corrosive resistant, stainless steel. These shims are made with a tab which allows for safe and easy installation and removal.&nbsp;
Any manufacturing plant that has numerous pumps and motors, which are maintained on a routine schedule, will benefit from them. Paper mills, refineries, utilities, food processors and large OEMs have experienced cost savings by using precut slotted shims. Industries that have developed predictive maintenance programs (using laser alignment and/or vibration analysis equipment) have found both time and cost savings with precut slotted shims.&nbsp;
What competitive advantage does Precision Brand® Slotted Shim offer?
Precision Brand realizes that quality and thickness tolerances are the two most important considerations when manufacturing shims. PBP publishes and guarantees thickness tolerances that are tighter than any other shim on the market and that are superior to the industry standards. Our material is produced using special gauge charts that require special millruns. This assures your customers of the tightest tolerances and the highest quality when using Precision Brand®.&nbsp;
Why are thickness tolerances so important?
Think about it. If you are using precision alignment equipment to determine the soft foot (gap) under a motor foot, you will want to install shims that are as close as possible to that gap’s thickness. With our guaranteed thickness they will be “right-on” when you do that final check. This will save time of having to do another measurement rotation.
Aren’t all precut slotted shims marked with an “actual” thickness?
No, the thickness marked on most shims is just nominally close. Nominally close can be defined as whatever thickness tolerance is acceptable to that manufacturer. This means that the thickness can vary considerably from what is marked on the shim. Using Precision Brand® shims gives your customers the advantage. Remember that PBP is the only shim manufacturer to publish and guarantee slotted shim tolerances.
What about shims that claim to be marked with an “exact” thickness like .098 instead of .100?
There are two things to remember when working with these shims. First, the off-size marking is probably not correct due to the variations that occur in the stainless steel rolling process. The only way this marking could be correct would be if each shim was measured and stamped individually. As you can realize, this is neither feasible nor economically possible for any shim manufacturer. Beware whenever you encounter a shim with a non-standard, “off-size” decimal thickness. Remember that these shims were originally intended to be “on-size” and ended up “off-size”. Second, when stacking numerous shims to make a shim pack, it is much easier to think in terms of “on-size”, closer tolerance shims. To illustrate this, let’s do two math problems:
Solve for X: 20+20+20+20+X=100 (on-size shims) OR Solve for X: 22+19+20+19+X=100 (off-size shims)
Working with “on-size” shims eliminates the time spent searching for that “perfect combination”.
How do I know that I am getting the best?
Prove it to yourself. Mic your shims with a micrometer or a caliper to determine the thickness (especially .050 and thicker!). Make sure to check in more than one spot to look for consistency throughout the shim. Compare these findings to what the shim is labeled. While you are checking, also look for burrs and crown (non-flatness). These two conditions can create false readings in the equipment that will lead to wasted shimming time. Put Precision Brand Slotted Shim to the test and I am sure that you will find it to be the best!
Product Description: Precut Slotted Shim
Material: 300 Series Stainless Steel
Size: A (2 Inch x 2 Inch)
Length A: 2 Inch
Thickness 0.001, 0.002, 0.003, 0.004, 0.005, 0.010, 0.015, 0.020, 0.025, 0.050, 0.075, 0.100 and 0.125 Inch
Groove G: 5/8 Inch
For Bolt Size: 5/8 UNC or UNF
Quantity Per Package: 130 Pieces (10 pieces for each thickness)
Packaging Weight: 3.09 kg

Precut Slotted Shim a Mini Kit, 2 Inch X 2 Inch, 300 Series Stainless Steel, 130 Pieces

precut slotted shim mini kit, inch inch, 300 series stainless steel, 130 pieces kit beralur prapotong, inci inci, baja tahan karat seri 300, buah precision brand berslot keluli siri keping brand/精密品牌 预切开槽垫片迷你套件，2 英寸 英寸，300 系列不锈钢，130 精密品牌

precut-slotted-shim-a-mini-kit-2-inch-x-2-inch-300-series-stainless-steel-130-pieces

Precut Slotted Shim B Mini Kit, 3 Inch X 3 Inch, 300 Series Stainless Steel, 130 Pieces, 42950

Precut Slotted Shim C Mini Kit, 4 Inch X 4 Inch, 300 Series Stainless Steel, 130 Pieces, 42960

Precut Slotted Shim D Mini Kit, 5 Inch X 5 Inch, 300 Series Stainless Steel, 130 Pieces, 42970

Precut Slotted Shim A Mini Kit, 2 Inch X 2 Inch, 300 Series Stainless Steel, 130 Pieces, 42940

Precision Brand® precut slotted shims are made from a 300 series stainless steel that resists rust and corrosion. Precut shims have tabs that makes shim placement easier and safer, while eliminating the need to place hands under the machinery during installation or removal of shim. Each 50mm x 50mm motor shim has a slot size of 16mm and can be used for bolt sizes up to a maximum of M16. Each shim is marked with thickness in metric. Precision Brand® slotted shim is the best way to solve alignment and leveling problems on motors, pumps, generators, and other plant machinery. Precut slotted shims are economical, safe, and accurate. Reduce labor costs by eliminating hand cutting and reduce downtime by eliminating shim preparation. 

Thickness 0.05, 0.10, 0.20, 0.25, 0.40, 0.50, 0.70, 1 and 2 mm

Quantity Per Package: 100 Pieces (10 pieces for each thickness)

Precision Brand® precut slotted shims are made from a 300 series stainless steel that resists rust and corrosion. Precut shims have tabs that makes shim placement easier and safer, while eliminating the need to place hands under the machinery during installation or removal of shim. Each 50mm x 50mm motor shim has a slot size of 16mm and can be used for bolt sizes up to a maximum of M16. Each shim is marked with thickness in metric. Precision Brand® slotted shim is the best way to solve alignment and leveling problems on motors, pumps, generators, and other plant machinery. Precut slotted shims are economical, safe, and accurate. Reduce labor costs by eliminating hand cutting and reduce downtime by eliminating shim preparation. Precut slotted shims save money. Precuts decrease time and labor costs and ultimately reduce machine downtime. Precuts also eliminate the work involved in the hand cutting, flattening and deburring of shim stock. Precision Brand Slotted Shim is made of a corrosive resistant, stainless steel. These shims are made with a tab which allows for safe and easy installation and removal. Any manufacturing plant that has numerous pumps and motors, which are maintained on a routine schedule, will benefit from them. Paper mills, refineries, utilities, food processors and large OEMs have experienced cost savings by using precut slotted shims. Industries that have developed predictive maintenance programs (using laser alignment and/or vibration analysis equipment) have found both time and cost savings with precut slotted shims. What competitive advantage does Precision Brand® Slotted Shim offer?Precision Brand realizes that quality and thickness tolerances are the two most important considerations when manufacturing shims. PBP publishes and guarantees thickness tolerances that are tighter than any other shim on the market and that are superior to the industry standards. Our material is produced using special gauge charts that require special millruns. This assures your customers of the tightest tolerances and the highest quality when using Precision Brand®. Why are thickness tolerances so important?Think about it. If you are using precision alignment equipment to determine the soft foot (gap) under a motor foot, you will want to install shims that are as close as possible to that gap’s thickness. With our guaranteed thickness they will be “right-on” when you do that final check. This will save time of having to do another measurement rotation.Aren’t all precut slotted shims marked with an “actual” thickness?No, the thickness marked on most shims is just nominally close. Nominally close can be defined as whatever thickness tolerance is acceptable to that manufacturer. This means that the thickness can vary considerably from what is marked on the shim. Using Precision Brand® shims gives your customers the advantage. Remember that PBP is the only shim manufacturer to publish and guarantee slotted shim tolerances.What about shims that claim to be marked with an “exact” thickness like .098 instead of .100?There are two things to remember when working with these shims. First, the off-size marking is probably not correct due to the variations that occur in the stainless steel rolling process. The only way this marking could be correct would be if each shim was measured and stamped individually. As you can realize, this is neither feasible nor economically possible for any shim manufacturer. Beware whenever you encounter a shim with a non-standard, “off-size” decimal thickness. Remember that these shims were originally intended to be “on-size” and ended up “off-size”. Second, when stacking numerous shims to make a shim pack, it is much easier to think in terms of “on-size”, closer tolerance shims. To illustrate this, let’s do two math problems:Solve for X: 20+20+20+20+X=100 (on-size shims) OR Solve for X: 22+19+20+19+X=100 (off-size shims)Working with “on-size” shims eliminates the time spent searching for that “perfect combination”.How do I know that I am getting the best?Prove it to yourself. Mic your shims with a micrometer or a caliper to determine the thickness (especially .050 and thicker!). Make sure to check in more than one spot to look for consistency throughout the shim. Compare these findings to what the shim is labeled. While you are checking, also look for burrs and crown (non-flatness). These two conditions can create false readings in the equipment that will lead to wasted shimming time. Put Precision Brand Slotted Shim to the test and I am sure that you will find it to be the best!Product Description: Precut Slotted ShimMaterial: 300 Series Stainless SteelSize: A (50 mm x 50 mm)Length A: 50 mmThickness 0.05, 0.10, 0.20, 0.25, 0.40, 0.50, 0.70, 1 and 2 mmGroove G: 16 mmFor Bolt Size: M16Quantity Per Package: 100 Pieces (10 pieces for each thickness)Packaging Weight: 1.20 kg

Precision Brand® precut slotted shims are made from a 300 series stainless steel that resists rust and corrosion. Precut shims have tabs that makes shim placement easier and safer, while eliminating the need to place hands under the machinery during installation or removal of shim. Each 50mm x 50mm motor shim has a slot size of 16mm and can be used for bolt sizes up to a maximum of M16. Each shim is marked with thickness in metric. Precision Brand® slotted shim is the best way to solve alignment and leveling problems on motors, pumps, generators, and other plant machinery. Precut slotted shims are economical, safe, and accurate. Reduce labor costs by eliminating hand cutting and reduce downtime by eliminating shim preparation.&nbsp;
Precut slotted shims save money. Precuts decrease time and labor costs and ultimately reduce machine downtime. Precuts also eliminate the work involved in the hand cutting, flattening and deburring of shim stock. Precision Brand Slotted Shim is made of a corrosive resistant, stainless steel. These shims are made with a tab which allows for safe and easy installation and removal.&nbsp;
Any manufacturing plant that has numerous pumps and motors, which are maintained on a routine schedule, will benefit from them. Paper mills, refineries, utilities, food processors and large OEMs have experienced cost savings by using precut slotted shims. Industries that have developed predictive maintenance programs (using laser alignment and/or vibration analysis equipment) have found both time and cost savings with precut slotted shims.&nbsp;
What competitive advantage does Precision Brand® Slotted Shim offer?
Precision Brand realizes that quality and thickness tolerances are the two most important considerations when manufacturing shims. PBP publishes and guarantees thickness tolerances that are tighter than any other shim on the market and that are superior to the industry standards. Our material is produced using special gauge charts that require special millruns. This assures your customers of the tightest tolerances and the highest quality when using Precision Brand®.&nbsp;
Why are thickness tolerances so important?
Think about it. If you are using precision alignment equipment to determine the soft foot (gap) under a motor foot, you will want to install shims that are as close as possible to that gap’s thickness. With our guaranteed thickness they will be “right-on” when you do that final check. This will save time of having to do another measurement rotation.
Aren’t all precut slotted shims marked with an “actual” thickness?
No, the thickness marked on most shims is just nominally close. Nominally close can be defined as whatever thickness tolerance is acceptable to that manufacturer. This means that the thickness can vary considerably from what is marked on the shim. Using Precision Brand® shims gives your customers the advantage. Remember that PBP is the only shim manufacturer to publish and guarantee slotted shim tolerances.
What about shims that claim to be marked with an “exact” thickness like .098 instead of .100?
There are two things to remember when working with these shims. First, the off-size marking is probably not correct due to the variations that occur in the stainless steel rolling process. The only way this marking could be correct would be if each shim was measured and stamped individually. As you can realize, this is neither feasible nor economically possible for any shim manufacturer. Beware whenever you encounter a shim with a non-standard, “off-size” decimal thickness. Remember that these shims were originally intended to be “on-size” and ended up “off-size”. Second, when stacking numerous shims to make a shim pack, it is much easier to think in terms of “on-size”, closer tolerance shims. To illustrate this, let’s do two math problems:
Solve for X: 20+20+20+20+X=100 (on-size shims) OR Solve for X: 22+19+20+19+X=100 (off-size shims)
Working with “on-size” shims eliminates the time spent searching for that “perfect combination”.
How do I know that I am getting the best?
Prove it to yourself. Mic your shims with a micrometer or a caliper to determine the thickness (especially .050 and thicker!). Make sure to check in more than one spot to look for consistency throughout the shim. Compare these findings to what the shim is labeled. While you are checking, also look for burrs and crown (non-flatness). These two conditions can create false readings in the equipment that will lead to wasted shimming time. Put Precision Brand Slotted Shim to the test and I am sure that you will find it to be the best!
Product Description: Precut Slotted Shim
Material: 300 Series Stainless Steel
Size: A (50 mm x 50 mm)
Length A: 50 mm
Thickness 0.05, 0.10, 0.20, 0.25, 0.40, 0.50, 0.70, 1 and 2 mm
Groove G: 16 mm
For Bolt Size: M16
Quantity Per Package: 100 Pieces (10 pieces for each thickness)
Packaging Weight: 1.20 kg

Precision Brand Precut Slotted Shim Kit, 50mm X 50mm, 300 Series Stainless Steel, 100 Pieces

precision brand precut slotted shim kit, 50mm 50mm, 300 series stainless steel, 100 pieces kit beralur brand, baja tahan karat seri 300, buah berslot jenama ketepatan, keluli siri keping brand/精密品牌 预切开槽垫片套件，50 毫米 50 毫米，300 系列不锈钢，100 精密品牌

precision-brand-precut-slotted-shim-kit-50mm-x-50mm-300-series-stainless-steel-100-pieces

75mm x 75mm, Slot 22mm, 81955

100mm x 100mm, Slot 32mm, 81965

125mm x 125mm, Slot 41mm, 81975

50mm x 50mm, Slot 16mm, 81945

Thickness 0.001, 0.003, 0.005, 0.010, 0.015, 0.020, 0.025 and 0.075 Inch

Quantity Per Package: 80 Pieces (10 pieces for each thickness)

Precision Brand® precut slotted shims are made from a 300 series stainless steel that resists rust and corrosion. Precut shims have tabs that makes shim placement easier and safer, while eliminating the need to place hands under the machinery during installation or removal of shim. Each 2 Inch x 2 Inch motor shim has a slot size of 16mm and can be used for bolt sizes up to a maximum of 5/8 Inch. Each shim is marked with thickness in metric. Precision Brand® slotted shim is the best way to solve alignment and leveling problems on motors, pumps, generators, and other plant machinery. Precut slotted shims are economical, safe, and accurate. Reduce labor costs by eliminating hand cutting and reduce downtime by eliminating shim preparation. Precut slotted shims save money. Precuts decrease time and labor costs and ultimately reduce machine downtime. Precuts also eliminate the work involved in the hand cutting, flattening and deburring of shim stock. Precision Brand Slotted Shim is made of a corrosive resistant, stainless steel. These shims are made with a tab which allows for safe and easy installation and removal. Any manufacturing plant that has numerous pumps and motors, which are maintained on a routine schedule, will benefit from them. Paper mills, refineries, utilities, food processors and large OEMs have experienced cost savings by using precut slotted shims. Industries that have developed predictive maintenance programs (using laser alignment and/or vibration analysis equipment) have found both time and cost savings with precut slotted shims. What competitive advantage does Precision Brand® Slotted Shim offer?Precision Brand realizes that quality and thickness tolerances are the two most important considerations when manufacturing shims. PBP publishes and guarantees thickness tolerances that are tighter than any other shim on the market and that are superior to the industry standards. Our material is produced using special gauge charts that require special millruns. This assures your customers of the tightest tolerances and the highest quality when using Precision Brand®. Why are thickness tolerances so important?Think about it. If you are using precision alignment equipment to determine the soft foot (gap) under a motor foot, you will want to install shims that are as close as possible to that gap’s thickness. With our guaranteed thickness they will be “right-on” when you do that final check. This will save time of having to do another measurement rotation.Aren’t all precut slotted shims marked with an “actual” thickness?No, the thickness marked on most shims is just nominally close. Nominally close can be defined as whatever thickness tolerance is acceptable to that manufacturer. This means that the thickness can vary considerably from what is marked on the shim. Using Precision Brand® shims gives your customers the advantage. Remember that PBP is the only shim manufacturer to publish and guarantee slotted shim tolerances.What about shims that claim to be marked with an “exact” thickness like .098 instead of .100?There are two things to remember when working with these shims. First, the off-size marking is probably not correct due to the variations that occur in the stainless steel rolling process. The only way this marking could be correct would be if each shim was measured and stamped individually. As you can realize, this is neither feasible nor economically possible for any shim manufacturer. Beware whenever you encounter a shim with a non-standard, “off-size” decimal thickness. Remember that these shims were originally intended to be “on-size” and ended up “off-size”. Second, when stacking numerous shims to make a shim pack, it is much easier to think in terms of “on-size”, closer tolerance shims. To illustrate this, let’s do two math problems:Solve for X: 20+20+20+20+X=100 (on-size shims) OR Solve for X: 22+19+20+19+X=100 (off-size shims)Working with “on-size” shims eliminates the time spent searching for that “perfect combination”.How do I know that I am getting the best?Prove it to yourself. Mic your shims with a micrometer or a caliper to determine the thickness (especially .050 and thicker!). Make sure to check in more than one spot to look for consistency throughout the shim. Compare these findings to what the shim is labeled. While you are checking, also look for burrs and crown (non-flatness). These two conditions can create false readings in the equipment that will lead to wasted shimming time. Put Precision Brand Slotted Shim to the test and I am sure that you will find it to be the best!Product Description: Precut Slotted ShimMaterial: 300 Series Stainless SteelSize: A (2 Inch x 2 Inch)Length A: 2 InchThickness 0.001, 0.003, 0.005, 0.010, 0.015, 0.020, 0.025 and 0.075 InchGroove G: 5/8 InchFor Bolt Size: 5/8 UNC or UNFQuantity Per Package: 80 Pieces (10 pieces for each thickness)Packaging Weight: 1.67 kg

Precision Brand® precut slotted shims are made from a 300 series stainless steel that resists rust and corrosion. Precut shims have tabs that makes shim placement easier and safer, while eliminating the need to place hands under the machinery during installation or removal of shim. Each 2 Inch x 2 Inch motor shim has a slot size of 16mm and can be used for bolt sizes up to a maximum of 5/8 Inch. Each shim is marked with thickness in metric. Precision Brand® slotted shim is the best way to solve alignment and leveling problems on motors, pumps, generators, and other plant machinery. Precut slotted shims are economical, safe, and accurate. Reduce labor costs by eliminating hand cutting and reduce downtime by eliminating shim preparation.&nbsp;
Precut slotted shims save money. Precuts decrease time and labor costs and ultimately reduce machine downtime. Precuts also eliminate the work involved in the hand cutting, flattening and deburring of shim stock. Precision Brand Slotted Shim is made of a corrosive resistant, stainless steel. These shims are made with a tab which allows for safe and easy installation and removal.&nbsp;
Any manufacturing plant that has numerous pumps and motors, which are maintained on a routine schedule, will benefit from them. Paper mills, refineries, utilities, food processors and large OEMs have experienced cost savings by using precut slotted shims. Industries that have developed predictive maintenance programs (using laser alignment and/or vibration analysis equipment) have found both time and cost savings with precut slotted shims.&nbsp;
What competitive advantage does Precision Brand® Slotted Shim offer?
Precision Brand realizes that quality and thickness tolerances are the two most important considerations when manufacturing shims. PBP publishes and guarantees thickness tolerances that are tighter than any other shim on the market and that are superior to the industry standards. Our material is produced using special gauge charts that require special millruns. This assures your customers of the tightest tolerances and the highest quality when using Precision Brand®.&nbsp;
Why are thickness tolerances so important?
Think about it. If you are using precision alignment equipment to determine the soft foot (gap) under a motor foot, you will want to install shims that are as close as possible to that gap’s thickness. With our guaranteed thickness they will be “right-on” when you do that final check. This will save time of having to do another measurement rotation.
Aren’t all precut slotted shims marked with an “actual” thickness?
No, the thickness marked on most shims is just nominally close. Nominally close can be defined as whatever thickness tolerance is acceptable to that manufacturer. This means that the thickness can vary considerably from what is marked on the shim. Using Precision Brand® shims gives your customers the advantage. Remember that PBP is the only shim manufacturer to publish and guarantee slotted shim tolerances.
What about shims that claim to be marked with an “exact” thickness like .098 instead of .100?
There are two things to remember when working with these shims. First, the off-size marking is probably not correct due to the variations that occur in the stainless steel rolling process. The only way this marking could be correct would be if each shim was measured and stamped individually. As you can realize, this is neither feasible nor economically possible for any shim manufacturer. Beware whenever you encounter a shim with a non-standard, “off-size” decimal thickness. Remember that these shims were originally intended to be “on-size” and ended up “off-size”. Second, when stacking numerous shims to make a shim pack, it is much easier to think in terms of “on-size”, closer tolerance shims. To illustrate this, let’s do two math problems:
Solve for X: 20+20+20+20+X=100 (on-size shims) OR Solve for X: 22+19+20+19+X=100 (off-size shims)
Working with “on-size” shims eliminates the time spent searching for that “perfect combination”.
How do I know that I am getting the best?
Prove it to yourself. Mic your shims with a micrometer or a caliper to determine the thickness (especially .050 and thicker!). Make sure to check in more than one spot to look for consistency throughout the shim. Compare these findings to what the shim is labeled. While you are checking, also look for burrs and crown (non-flatness). These two conditions can create false readings in the equipment that will lead to wasted shimming time. Put Precision Brand Slotted Shim to the test and I am sure that you will find it to be the best!
Product Description: Precut Slotted Shim
Material: 300 Series Stainless Steel
Size: A (2 Inch x 2 Inch)
Length A: 2 Inch
Thickness 0.001, 0.003, 0.005, 0.010, 0.015, 0.020, 0.025 and 0.075 Inch
Groove G: 5/8 Inch
For Bolt Size: 5/8 UNC or UNF
Quantity Per Package: 80 Pieces (10 pieces for each thickness)
Packaging Weight: 1.67 kg

Precut Slotted Shim Shop Kit, 2 Inch X 2 Inch, 300 Series Stainless Steel, 80 Pieces

precut slotted shim shop kit, inch inch, 300 series stainless steel, 80 pieces kit toko berlubang precut, inci inci, baja tahan karat seri 300, buah precision brand kedai berslot keluli siri keping brand/精密品牌 预切开槽垫片车间套件，2 英寸 英寸，300 系列不锈钢，80 精密品牌

precut-slotted-shim-shop-kit-2-inch-x-2-inch-300-series-stainless-steel-80-pieces

3 Inch x 3 Inch, Slot 7/8 Inch, 42955

4 Inch x 4 Inch, Slot 1-1/4 Inch, 42965

5 Inch x 5 Inch, Slot 1-5/8 Inch, 42975

6 Inch x 6 Inch, Slot 2 Inch, 42925 (52 Pieces)

8 Inch x 8 Inch, Slot 2-3/8 Inch, 42935 (52 Pieces)

2 Inch x 2 Inch, Slot 5/8 Inch, 42945

Precision Brand All 300 Series Stainless Worm Gear Hose Clamp 2inch B24HSP

<h3 class="md-block-header-three">Precision Brand All 300 Series Stainless Worm Gear Hose Clamp 2inch B24HSP</h3>The high quality 300 series 1/2 inch band and housing are matched with a 300 series 5/16 inch hex head screw. This clamp is highly corrosion resistant, well suited for marine applications and is low in magnetic permeability. Rounded edges to protect the hose. Efficient three-piece construction. Screws feature deep slots for quick installation. Precision Brand Standard Series Hose Clamps have 100% interlock construction.<h3 class="md-block-header-three">Features:</h3><ul class="md-block-unordered-list-item"><li>One piece housing which directly locks into the band and spot weld free design</li><li>Easily installed with screwdriver, nut driver or socket wrench</li><li>Meets or exceeds SAE torque specifications</li></ul><h3 class="md-block-header-three">Specification:</h3><ul class="md-block-unordered-list-item"><li>Brand: Precision Brand</li><li>Product Type: Worm Gear Hose Clamp</li><li>Minimum Clamping Diameter: 1-1/16 inch</li><li>Maximum Clamping Diameter: 2 inch</li><li>SAE Sizes: 24</li><li>Material: 300 Series Stainless Steel</li><li>ORM-D: No</li><li>Quantity per Package: 10 Piece</li></ul>

<h3>Precision Brand All 300 Series Stainless Worm Gear Hose Clamp 2inch B24HSP</h3>
The high quality 300 series 1/2 inch band and housing are matched with a 300 series 5/16 inch hex head screw. This clamp is highly corrosion resistant, well suited for marine applications and is low in magnetic permeability. Rounded edges to protect the hose. Efficient three-piece construction. Screws feature deep slots for quick installation. Precision Brand Standard Series Hose Clamps have 100% interlock construction.
<h3>Features:</h3>
<ul>
<li>One piece housing which directly locks into the band and spot weld free design</li>
<li>Easily installed with screwdriver, nut driver or socket wrench</li>
<li>Meets or exceeds SAE torque specifications</li>
</ul>
<h3>Specification:</h3>
<ul>
<li>Brand: Precision Brand</li>
<li>Product Type: Worm Gear Hose Clamp</li>
<li>Minimum Clamping Diameter: 1-1/16 inch</li>
<li>Maximum Clamping Diameter: 2 inch</li>
<li>SAE Sizes: 24</li>
<li>Material: 300 Series Stainless Steel</li>
<li>ORM-D: No</li>
<li>Quantity per Package: 10 Piece</li>
</ul>

precision brand 300 series stainless worm gear hose clamp 2inch b24hsp merek presisi semua seri inci klem selang jenama pengapit hos brand/精密品牌 所有300系列不锈钢蜗轮软管夹2英寸b24hsp 精密品牌

precision-brand-all-300-series-stainless-worm-gear-hose-clamp-2inch-b24hsp

Precision Brand All 300 Series Stainless Worm Gear Hose Clamp 7/8inch B6HSP

<h3 class="md-block-header-three">Precision Brand All 300 Series Stainless Worm Gear Hose Clamp 7/8inch B6HSP</h3>The high quality 300 series 1/2 inch band and housing are matched with a 300 series 5/16 inch hex head screw. This clamp is highly corrosion resistant, well suited for marine applications and is low in magnetic permeability. Rounded edges to protect the hose. Efficient three-piece construction. Screws feature deep slots for quick installation. Precision Brand Standard Series Hose Clamps have 100% interlock construction.<h3 class="md-block-header-three">Features:</h3><ul class="md-block-unordered-list-item"><li>One piece housing which directly locks into the band and spot weld free design</li><li>Easily installed with screwdriver, nut driver or socket wrench</li><li>Meets or exceeds SAE torque specifications</li></ul><h3 class="md-block-header-three">Specification:</h3><ul class="md-block-unordered-list-item"><li>Brand: Precision Brand</li><li>Product Type: Worm Gear Hose Clamp</li><li>Minimum Clamping Diameter: 3/8 inch</li><li>Maximum Clamping Diameter: 7/8 inch</li><li>SAE Sizes: 6</li><li>Material: 300 Series Stainless Steel</li><li>ORM-D: No</li><li>Quantity per Package: 10 Piece</li></ul>

<h3>Precision Brand All 300 Series Stainless Worm Gear Hose Clamp 7/8inch B6HSP</h3>
The high quality 300 series 1/2 inch band and housing are matched with a 300 series 5/16 inch hex head screw. This clamp is highly corrosion resistant, well suited for marine applications and is low in magnetic permeability. Rounded edges to protect the hose. Efficient three-piece construction. Screws feature deep slots for quick installation. Precision Brand Standard Series Hose Clamps have 100% interlock construction.
<h3>Features:</h3>
<ul>
<li>One piece housing which directly locks into the band and spot weld free design</li>
<li>Easily installed with screwdriver, nut driver or socket wrench</li>
<li>Meets or exceeds SAE torque specifications</li>
</ul>
<h3>Specification:</h3>
<ul>
<li>Brand: Precision Brand</li>
<li>Product Type: Worm Gear Hose Clamp</li>
<li>Minimum Clamping Diameter: 3/8 inch</li>
<li>Maximum Clamping Diameter: 7/8 inch</li>
<li>SAE Sizes: 6</li>
<li>Material: 300 Series Stainless Steel</li>
<li>ORM-D: No</li>
<li>Quantity per Package: 10 Piece</li>
</ul>

precision brand 300 series stainless worm gear hose clamp 7/8inch b6hsp merek presisi semua seri cacing selang gigi penjepit 7/8 inch klem jenama 8inch pengapit hos brand/精密品牌 所有300系列不锈钢蜗轮软管夹7/8英寸b6hsp 精密品牌

precision-brand-all-300-series-stainless-worm-gear-hose-clamp-7-8inch-b6hsp

Precision Brand All 300 Series Stainless Worm Gear Hose Clamp 2-3/4inch B36HSP

<h3 class="md-block-header-three">Precision Brand All 300 Series Stainless Worm Gear Hose Clamp 2-3/4inch B36HSP</h3>The high quality 300 series 1/2 inch band and housing are matched with a 300 series 5/16 inch hex head screw. This clamp is highly corrosion resistant, well suited for marine applications and is low in magnetic permeability. Rounded edges to protect the hose. Efficient three-piece construction. Screws feature deep slots for quick installation. Precision Brand Standard Series Hose Clamps have 100% interlock construction.<h3 class="md-block-header-three">Features:</h3><ul class="md-block-unordered-list-item"><li>One piece housing which directly locks into the band and spot weld free design</li><li>Easily installed with screwdriver, nut driver or socket wrench</li><li>Meets or exceeds SAE torque specifications</li></ul><h3 class="md-block-header-three">Specification:</h3><ul class="md-block-unordered-list-item"><li>Brand: Precision Brand</li><li>Product Type: Worm Gear Hose Clamp</li><li>Minimum Clamping Diameter: 1-13/16 inch</li><li>Maximum Clamping Diameter: 2-3/4 inch</li><li>SAE Sizes: 36</li><li>Material: 300 Series Stainless Steel</li><li>ORM-D: No</li><li>Quantity per Package: 10 Piece</li></ul>

<h3>Precision Brand All 300 Series Stainless Worm Gear Hose Clamp 2-3/4inch B36HSP</h3>
The high quality 300 series 1/2 inch band and housing are matched with a 300 series 5/16 inch hex head screw. This clamp is highly corrosion resistant, well suited for marine applications and is low in magnetic permeability. Rounded edges to protect the hose. Efficient three-piece construction. Screws feature deep slots for quick installation. Precision Brand Standard Series Hose Clamps have 100% interlock construction.
<h3>Features:</h3>
<ul>
<li>One piece housing which directly locks into the band and spot weld free design</li>
<li>Easily installed with screwdriver, nut driver or socket wrench</li>
<li>Meets or exceeds SAE torque specifications</li>
</ul>
<h3>Specification:</h3>
<ul>
<li>Brand: Precision Brand</li>
<li>Product Type: Worm Gear Hose Clamp</li>
<li>Minimum Clamping Diameter: 1-13/16 inch</li>
<li>Maximum Clamping Diameter: 2-3/4 inch</li>
<li>SAE Sizes: 36</li>
<li>Material: 300 Series Stainless Steel</li>
<li>ORM-D: No</li>
<li>Quantity per Package: 10 Piece</li>
</ul>

precision brand 300 series stainless worm gear hose clamp 2-3/4inch b36hsp merek presisi semua seri 2-3 4inch klem selang pengapit hos brand/精密品牌 所有300系列不锈钢蜗轮软管夹2-3 精密品牌

precision-brand-all-300-series-stainless-worm-gear-hose-clamp-2-3-4inch-b36hsp

Precision Brand All 300 Series Stainless Worm Gear Hose Clamp 16-15/16inch B264HSP

<h3 class="md-block-header-three">Precision Brand All 300 Series Stainless Worm Gear Hose Clamp 16-15/16inch B264HSP</h3>The high quality 300 series 1/2 inch band and housing are matched with a 300 series 5/16 inch hex head screw. This clamp is highly corrosion resistant, well suited for marine applications and is low in magnetic permeability. Rounded edges to protect the hose. Efficient three-piece construction. Screws feature deep slots for quick installation. Precision Brand Standard Series Hose Clamps have 100% interlock construction.<h3 class="md-block-header-three">Features:</h3><ul class="md-block-unordered-list-item"><li>One piece housing which directly locks into the band and spot weld free design</li><li>Easily installed with screwdriver, nut driver or socket wrench</li><li>Meets or exceeds SAE torque specifications</li></ul><h3 class="md-block-header-three">Specification:</h3><ul class="md-block-unordered-list-item"><li>Brand: Precision Brand</li><li>Product Type: Worm Gear Hose Clamp</li><li>Minimum Clamping Diameter: 14 inch</li><li>Maximum Clamping Diameter: 16-15/16 inch</li><li>SAE Sizes: 264</li><li>Material: 300 Series Stainless Steel</li><li>ORM-D: No</li><li>Quantity per Package: 10 Piece</li></ul>

<h3>Precision Brand All 300 Series Stainless Worm Gear Hose Clamp 16-15/16inch B264HSP</h3>
The high quality 300 series 1/2 inch band and housing are matched with a 300 series 5/16 inch hex head screw. This clamp is highly corrosion resistant, well suited for marine applications and is low in magnetic permeability. Rounded edges to protect the hose. Efficient three-piece construction. Screws feature deep slots for quick installation. Precision Brand Standard Series Hose Clamps have 100% interlock construction.
<h3>Features:</h3>
<ul>
<li>One piece housing which directly locks into the band and spot weld free design</li>
<li>Easily installed with screwdriver, nut driver or socket wrench</li>
<li>Meets or exceeds SAE torque specifications</li>
</ul>
<h3>Specification:</h3>
<ul>
<li>Brand: Precision Brand</li>
<li>Product Type: Worm Gear Hose Clamp</li>
<li>Minimum Clamping Diameter: 14 inch</li>
<li>Maximum Clamping Diameter: 16-15/16 inch</li>
<li>SAE Sizes: 264</li>
<li>Material: 300 Series Stainless Steel</li>
<li>ORM-D: No</li>
<li>Quantity per Package: 10 Piece</li>
</ul>

precision brand 300 series stainless worm gear hose clamp 16-15/16inch b264hsp merek presisi semua seri cacing selang gigi penjepit 16-15 16 inch klem jenama 16inch pengapit hos brand/精密品牌 所有300系列不锈钢蜗轮软管夹16-15 精密品牌

precision-brand-all-300-series-stainless-worm-gear-hose-clamp-16-15-16inch-b264hsp

Precision Brand All 300 Series Stainless Worm Gear Hose Clamp 5inch B72HSP

<h3 class="md-block-header-three">Precision Brand All 300 Series Stainless Worm Gear Hose Clamp 5inch B72HSP</h3>The high quality 300 series 1/2 inch band and housing are matched with a 300 series 5/16 inch hex head screw. This clamp is highly corrosion resistant, well suited for marine applications and is low in magnetic permeability. Rounded edges to protect the hose. Efficient three-piece construction. Screws feature deep slots for quick installation. Precision Brand Standard Series Hose Clamps have 100% interlock construction.<h3 class="md-block-header-three">Features:</h3><ul class="md-block-unordered-list-item"><li>One piece housing which directly locks into the band and spot weld free design</li><li>Easily installed with screwdriver, nut driver or socket wrench</li><li>Meets or exceeds SAE torque specifications</li></ul><h3 class="md-block-header-three">Specification:</h3><ul class="md-block-unordered-list-item"><li>Brand: Precision Brand</li><li>Product Type: Worm Gear Hose Clamp</li><li>Minimum Clamping Diameter: 4-1/16 inch</li><li>Maximum Clamping Diameter: 5 inch</li><li>SAE Sizes: 72</li><li>Material: 300 Series Stainless Steel</li><li>ORM-D: No</li><li>Quantity per Package: 10 Piece</li></ul>

<h3>Precision Brand All 300 Series Stainless Worm Gear Hose Clamp 5inch B72HSP</h3>
The high quality 300 series 1/2 inch band and housing are matched with a 300 series 5/16 inch hex head screw. This clamp is highly corrosion resistant, well suited for marine applications and is low in magnetic permeability. Rounded edges to protect the hose. Efficient three-piece construction. Screws feature deep slots for quick installation. Precision Brand Standard Series Hose Clamps have 100% interlock construction.
<h3>Features:</h3>
<ul>
<li>One piece housing which directly locks into the band and spot weld free design</li>
<li>Easily installed with screwdriver, nut driver or socket wrench</li>
<li>Meets or exceeds SAE torque specifications</li>
</ul>
<h3>Specification:</h3>
<ul>
<li>Brand: Precision Brand</li>
<li>Product Type: Worm Gear Hose Clamp</li>
<li>Minimum Clamping Diameter: 4-1/16 inch</li>
<li>Maximum Clamping Diameter: 5 inch</li>
<li>SAE Sizes: 72</li>
<li>Material: 300 Series Stainless Steel</li>
<li>ORM-D: No</li>
<li>Quantity per Package: 10 Piece</li>
</ul>

precision brand 300 series stainless worm gear hose clamp 5inch b72hsp merek presisi semua seri cacing selang gigi penjepit inch klem jenama pengapit hos brand/精密品牌 所有300系列不锈钢蜗轮软管夹5英寸b72hsp 精密品牌

precision-brand-all-300-series-stainless-worm-gear-hose-clamp-5inch-b72hsp

Precision Brand All 300 Series Stainless Worm Gear Hose Clamp 1-1/4inch B12HSP

<h3 class="md-block-header-three">Precision Brand All 300 Series Stainless Worm Gear Hose Clamp 1-1/4inch B12HSP</h3>The high quality 300 series 1/2 inch band and housing are matched with a 300 series 5/16 inch hex head screw. This clamp is highly corrosion resistant, well suited for marine applications and is low in magnetic permeability. Rounded edges to protect the hose. Efficient three-piece construction. Screws feature deep slots for quick installation. Precision Brand Standard Series Hose Clamps have 100% interlock construction.<h3 class="md-block-header-three">Features:</h3><ul class="md-block-unordered-list-item"><li>One piece housing which directly locks into the band and spot weld free design</li><li>Easily installed with screwdriver, nut driver or socket wrench</li><li>Meets or exceeds SAE torque specifications</li></ul><h3 class="md-block-header-three">Specification:</h3><ul class="md-block-unordered-list-item"><li>Brand: Precision Brand</li><li>Product Type: Worm Gear Hose Clamp</li><li>Minimum Clamping Diameter: 9/16 inch</li><li>Maximum Clamping Diameter: 1-1/4 inch</li><li>SAE Sizes: 12</li><li>Material: 300 Series Stainless Steel</li><li>ORM-D: No</li><li>Quantity per Package: 10 Piece</li></ul>

<h3>Precision Brand All 300 Series Stainless Worm Gear Hose Clamp 1-1/4inch B12HSP</h3>
The high quality 300 series 1/2 inch band and housing are matched with a 300 series 5/16 inch hex head screw. This clamp is highly corrosion resistant, well suited for marine applications and is low in magnetic permeability. Rounded edges to protect the hose. Efficient three-piece construction. Screws feature deep slots for quick installation. Precision Brand Standard Series Hose Clamps have 100% interlock construction.
<h3>Features:</h3>
<ul>
<li>One piece housing which directly locks into the band and spot weld free design</li>
<li>Easily installed with screwdriver, nut driver or socket wrench</li>
<li>Meets or exceeds SAE torque specifications</li>
</ul>
<h3>Specification:</h3>
<ul>
<li>Brand: Precision Brand</li>
<li>Product Type: Worm Gear Hose Clamp</li>
<li>Minimum Clamping Diameter: 9/16 inch</li>
<li>Maximum Clamping Diameter: 1-1/4 inch</li>
<li>SAE Sizes: 12</li>
<li>Material: 300 Series Stainless Steel</li>
<li>ORM-D: No</li>
<li>Quantity per Package: 10 Piece</li>
</ul>

precision brand 300 series stainless worm gear hose clamp 1-1/4inch b12hsp merek presisi semua seri 1-1 4inch klem selang jenama pengapit hos brand/精密品牌 所有300系列不锈钢蜗轮软管夹1-1 精密品牌

precision-brand-all-300-series-stainless-worm-gear-hose-clamp-1-1-4inch-b12hsp

Precision Brand® precut slotted shims are made from a 300 series stainless steel that resists rust and corrosion. Precut shims have tabs that makes shim placement easier and safer, while eliminating the need to place hands under the machinery during installation or removal of shim. Each 125mm x 125mm motor shim has a slot size of 41mm and can be used for bolt sizes up to a maximum of M39. Each shim is marked with thickness in metric. Precision Brand® slotted shim is the best way to solve alignment and leveling problems on motors, pumps, generators, and other plant machinery. Precut slotted shims are economical, safe, and accurate. Reduce labor costs by eliminating hand cutting and reduce downtime by eliminating shim preparation. 

Precision Brand® precut slotted shims are made from a 300 series stainless steel that resists rust and corrosion. Precut shims have tabs that makes shim placement easier and safer, while eliminating the need to place hands under the machinery during installation or removal of shim. Each 125mm x 125mm motor shim has a slot size of 41mm and can be used for bolt sizes up to a maximum of M39. Each shim is marked with thickness in metric. Precision Brand® slotted shim is the best way to solve alignment and leveling problems on motors, pumps, generators, and other plant machinery. Precut slotted shims are economical, safe, and accurate. Reduce labor costs by eliminating hand cutting and reduce downtime by eliminating shim preparation. Product Description: Precut Slotted ShimMaterial: 300 Series Stainless SteelSize: D (125 mm x 125 mm)Length A: 125 mmThickness: 0.025 mmGroove G: 41 mmFor Bolt Size: M39Quantity Per Package: 10 Pieces

Precision Brand® precut slotted shims are made from a 300 series stainless steel that resists rust and corrosion. Precut shims have tabs that makes shim placement easier and safer, while eliminating the need to place hands under the machinery during installation or removal of shim. Each 125mm x 125mm motor shim has a slot size of 41mm and can be used for bolt sizes up to a maximum of M39. Each shim is marked with thickness in metric. Precision Brand® slotted shim is the best way to solve alignment and leveling problems on motors, pumps, generators, and other plant machinery. Precut slotted shims are economical, safe, and accurate. Reduce labor costs by eliminating hand cutting and reduce downtime by eliminating shim preparation.&nbsp;
Product Description: Precut Slotted Shim
Material: 300 Series Stainless Steel
Size: D (125 mm x 125 mm)
Length A: 125 mm
Thickness: 0.025 mm
Groove G: 41 mm
For Bolt Size: M39
Quantity Per Package: 10 Pieces

Precut Slotted Shim, 125mm X 125mm, 0.025mm to 2mm, 300 Series Stainless Steel, Pack of 10 Pieces

precut slotted shim, 125mm 125mm, 0.025mm 2mm, 300 series stainless steel, pack 10 pieces shim beralur prapotong, 0,025mm hingga baja tahan karat seri 300, kemasan buah precision brand berslot keluli siri pek keping brand/精密品牌 预切开槽垫片，125mm 125mm，0.025mm 2mm，300 系列不锈钢，10 件装 精密品牌

precut-slotted-shim-125mm-x-125mm-0-025mm-to-2mm-300-series-stainless-steel-pack-of-10-pieces

125mm x 125mm x 0.025mm, PN 81505

125mm x 125mm x 0.05mm, PN 81510

125mm x 125mm x 0.10mm, PN 81515

125mm x 125mm x 0.20mm, PN 81520

125mm x 125mm x 0.25mm, PN 81525

125mm x 125mm x 0.40mm, PN 81530

125mm x 125mm x 0.50mm, PN 81535

125mm x 125mm x 0.70mm, PN 81540

125mm x 125mm x 1mm, PN 81545

125mm x 125mm x 2mm, PN 81550

Thickness

Precision Brand All 300 Series Stainless Worm Gear Hose Clamp 12-7/16inch B192HSP

<h3 class="md-block-header-three">Precision Brand All 300 Series Stainless Worm Gear Hose Clamp 12-7/16inch B192HSP</h3>The high quality 300 series 1/2 inch band and housing are matched with a 300 series 5/16 inch hex head screw. This clamp is highly corrosion resistant, well suited for marine applications and is low in magnetic permeability. Rounded edges to protect the hose. Efficient three-piece construction. Screws feature deep slots for quick installation. Precision Brand Standard Series Hose Clamps have 100% interlock construction.<h3 class="md-block-header-three">Features:</h3><ul class="md-block-unordered-list-item"><li>One piece housing which directly locks into the band and spot weld free design</li><li>Easily installed with screwdriver, nut driver or socket wrench</li><li>Meets or exceeds SAE torque specifications</li></ul><h3 class="md-block-header-three">Specification:</h3><ul class="md-block-unordered-list-item"><li>Brand: Precision Brand</li><li>Product Type: Worm Gear Hose Clamp</li><li>Minimum Clamping Diameter: 9-1/2 inch</li><li>Maximum Clamping Diameter: 12-7/16 inch</li><li>SAE Sizes: 192</li><li>Material: 300 Series Stainless Steel</li><li>ORM-D: No</li><li>Quantity per Package: 10 Piece</li></ul>

<h3>Precision Brand All 300 Series Stainless Worm Gear Hose Clamp 12-7/16inch B192HSP</h3>
The high quality 300 series 1/2 inch band and housing are matched with a 300 series 5/16 inch hex head screw. This clamp is highly corrosion resistant, well suited for marine applications and is low in magnetic permeability. Rounded edges to protect the hose. Efficient three-piece construction. Screws feature deep slots for quick installation. Precision Brand Standard Series Hose Clamps have 100% interlock construction.
<h3>Features:</h3>
<ul>
<li>One piece housing which directly locks into the band and spot weld free design</li>
<li>Easily installed with screwdriver, nut driver or socket wrench</li>
<li>Meets or exceeds SAE torque specifications</li>
</ul>
<h3>Specification:</h3>
<ul>
<li>Brand: Precision Brand</li>
<li>Product Type: Worm Gear Hose Clamp</li>
<li>Minimum Clamping Diameter: 9-1/2 inch</li>
<li>Maximum Clamping Diameter: 12-7/16 inch</li>
<li>SAE Sizes: 192</li>
<li>Material: 300 Series Stainless Steel</li>
<li>ORM-D: No</li>
<li>Quantity per Package: 10 Piece</li>
</ul>

precision brand 300 series stainless worm gear hose clamp 12-7/16inch b192hsp merek presisi semua seri cacing selang gigi penjepit 12-7 16 inch klem jenama 16inch pengapit hos brand/精密品牌 所有300系列不锈钢蜗轮软管夹12-7 精密品牌

precision-brand-all-300-series-stainless-worm-gear-hose-clamp-12-7-16inch-b192hsp

Precision Brand® precut slotted shims are made from a 300 series stainless steel that resists rust and corrosion. Precut shims have tabs that makes shim placement easier and safer, while eliminating the need to place hands under the machinery during installation or removal of shim. Each 100mm x 100mm motor shim has a slot size of 32mm and can be used for bolt sizes up to a maximum of M30. Each shim is marked with thickness in metric. Precision Brand® slotted shim is the best way to solve alignment and leveling problems on motors, pumps, generators, and other plant machinery. Precut slotted shims are economical, safe, and accurate. Reduce labor costs by eliminating hand cutting and reduce downtime by eliminating shim preparation. 

Precision Brand® precut slotted shims are made from a 300 series stainless steel that resists rust and corrosion. Precut shims have tabs that makes shim placement easier and safer, while eliminating the need to place hands under the machinery during installation or removal of shim. Each 100mm x 100mm motor shim has a slot size of 32mm and can be used for bolt sizes up to a maximum of M30. Each shim is marked with thickness in metric. Precision Brand® slotted shim is the best way to solve alignment and leveling problems on motors, pumps, generators, and other plant machinery. Precut slotted shims are economical, safe, and accurate. Reduce labor costs by eliminating hand cutting and reduce downtime by eliminating shim preparation. Product Description: Precut Slotted ShimMaterial: 300 Series Stainless SteelSize: C (100 mm x 100 mm)Length A: 100 mmThickness: 0.025 mmGroove G: 32 mmFor Bolt Size: M30Quantity Per Package: 10 Pieces

Precision Brand® precut slotted shims are made from a 300 series stainless steel that resists rust and corrosion. Precut shims have tabs that makes shim placement easier and safer, while eliminating the need to place hands under the machinery during installation or removal of shim. Each 100mm x 100mm motor shim has a slot size of 32mm and can be used for bolt sizes up to a maximum of M30. Each shim is marked with thickness in metric. Precision Brand® slotted shim is the best way to solve alignment and leveling problems on motors, pumps, generators, and other plant machinery. Precut slotted shims are economical, safe, and accurate. Reduce labor costs by eliminating hand cutting and reduce downtime by eliminating shim preparation.&nbsp;
Product Description: Precut Slotted Shim
Material: 300 Series Stainless Steel
Size: C (100 mm x 100 mm)
Length A: 100 mm
Thickness: 0.025 mm
Groove G: 32 mm
For Bolt Size: M30
Quantity Per Package: 10 Pieces

Precut Slotted Shim, 100mm X 100mm, 0.025mm to 2mm, 300 Series Stainless Steel, Pack of 10 Pieces

precut slotted shim, 100mm 100mm, 0.025mm 2mm, 300 series stainless steel, pack 10 pieces shim beralur prapotong, 0,025mm hingga baja tahan karat seri 300, kemasan buah precision brand berslot keluli siri pek keping brand/精密品牌 预切开槽垫片，100mm 100mm，0.025mm 2mm，300 系列不锈钢，10 件装 精密品牌

precut-slotted-shim-100mm-x-100mm-0-025mm-to-2mm-300-series-stainless-steel-pack-of-10-pieces

100mm x 100mm x 0.025mm, PN 81405

100mm x 100mm x 0.05mm, PN 81410

100mm x 100mm x 0.10mm, PN 81415

100mm x 100mm x 0.20mm, PN 81420

100mm x 100mm x 0.25mm, PN 81425

100mm x 100mm x 0.40mm, PN 81430

100mm x 100mm x 0.50mm, PN 81435

100mm x 100mm x 0.70mm, PN 81440

100mm x 100mm x 1mm, PN 81445

100mm x 100mm x 2mm, PN 81450

Precision Brand® precut slotted shims are made from a 300 series stainless steel that resists rust and corrosion. Precut shims have tabs that makes shim placement easier and safer, while eliminating the need to place hands under the machinery during installation or removal of shim. Each 50mm x 50mm motor shim has a slot size of 16mm and can be used for bolt sizes up to a maximum of M16. 

Each shim is marked with thickness in metric. Precision Brand® slotted shim is the best way to solve alignment and leveling problems on motors, pumps, generators, and other plant machinery. Precut slotted shims are economical, safe, and accurate. Reduce labor costs by eliminating hand cutting and reduce downtime by eliminating shim preparation. 

Shown here are slotted shims in 0.025mm thickness, but other thicknesses up to 2mm are available as well.

Precision Brand® precut slotted shims are made from a 300 series stainless steel that resists rust and corrosion. Precut shims have tabs that makes shim placement easier and safer, while eliminating the need to place hands under the machinery during installation or removal of shim. Each 50mm x 50mm motor shim has a slot size of 16mm and can be used for bolt sizes up to a maximum of M16. Each shim is marked with thickness in metric. Precision Brand® slotted shim is the best way to solve alignment and leveling problems on motors, pumps, generators, and other plant machinery. Precut slotted shims are economical, safe, and accurate. Reduce labor costs by eliminating hand cutting and reduce downtime by eliminating shim preparation. Shown here are slotted shims in 0.025mm thickness, but other thicknesses up to 2mm are available as well.Product Description: Precut Slotted ShimMaterial: 300 Series Stainless SteelSize: A (50 mm x 50 mm)Length A: 50 mmThickness: 0.025 mmGroove G: 16 mmFor Bolt Size: M16Quantity Per Package: 10 Pieces

Precision Brand® precut slotted shims are made from a 300 series stainless steel that resists rust and corrosion. Precut shims have tabs that makes shim placement easier and safer, while eliminating the need to place hands under the machinery during installation or removal of shim. Each 50mm x 50mm motor shim has a slot size of 16mm and can be used for bolt sizes up to a maximum of M16.&nbsp;
Each shim is marked with thickness in metric. Precision Brand® slotted shim is the best way to solve alignment and leveling problems on motors, pumps, generators, and other plant machinery. Precut slotted shims are economical, safe, and accurate. Reduce labor costs by eliminating hand cutting and reduce downtime by eliminating shim preparation.&nbsp;
Shown here are slotted shims in 0.025mm thickness, but other thicknesses up to 2mm are available as well.
Product Description: Precut Slotted Shim
Material: 300 Series Stainless Steel
Size: A (50 mm x 50 mm)
Length A: 50 mm
Thickness: 0.025 mm
Groove G: 16 mm
For Bolt Size: M16
Quantity Per Package: 10 Pieces

Precut Slotted Shim, 50mm X 50mm, 0.025mm to 2mm, 300 Series Stainless Steel, Pack of 10 Pieces

precut slotted shim, 50mm 50mm, 0.025mm 2mm, 300 series stainless steel, pack 10 pieces shim beralur prapotong, 0,025mm hingga baja tahan karat seri 300, kemasan buah precision brand berslot keluli siri pek keping brand/精密品牌 预切开槽垫片，50mm 50mm，0.025mm 2mm，300 系列不锈钢，10 件装 精密品牌

precut-slotted-shim-50mm-x-50mm-0-025mm-to-2mm-300-series-stainless-steel-pack-of-10-pieces

50mm x 50mm x 0.025mm PN 81205

50mm x 50mm x 0.05mm PN 81210

50mm x 50mm x 0.10mm PN 81215

50mm x 50mm x 0.20mm PN 81220

50mm x 50mm x 0.25mm PN 81225

50mm x 50mm x 0.40mm PN 81230

50mm x 50mm x 0.50mm PN 81235

50mm x 50mm x 0.70mm PN 81240

50mm x 50mm x 1mm PN 81245

50mm x 50mm x 2mm PN 81250

Precision Brand® precut slotted shims are made from a 300 series stainless steel that resists rust and corrosion. Precut shims have tabs that makes shim placement easier and safer, while eliminating the need to place hands under the machinery during installation or removal of shim. Each 75mm x 75mm motor shim has a slot size of 22mm and can be used for bolt sizes up to a maximum of M22. Each shim is marked with thickness in metric. Precision Brand® slotted shim is the best way to solve alignment and leveling problems on motors, pumps, generators, and other plant machinery. Precut slotted shims are economical, safe, and accurate. Reduce labor costs by eliminating hand cutting and reduce downtime by eliminating shim preparation. 

Precision Brand® precut slotted shims are made from a 300 series stainless steel that resists rust and corrosion. Precut shims have tabs that makes shim placement easier and safer, while eliminating the need to place hands under the machinery during installation or removal of shim. Each 75mm x 75mm motor shim has a slot size of 22mm and can be used for bolt sizes up to a maximum of M22. Each shim is marked with thickness in metric. Precision Brand® slotted shim is the best way to solve alignment and leveling problems on motors, pumps, generators, and other plant machinery. Precut slotted shims are economical, safe, and accurate. Reduce labor costs by eliminating hand cutting and reduce downtime by eliminating shim preparation. Product Description: Precut Slotted ShimMaterial: 300 Series Stainless SteelSize: B (75 mm x 75 mm)Length A: 75 mmThickness: 0.025 mm to 2mmGroove G: 22 mmFor Bolt Size: M22Quantity Per Package: 10 Pieces

Precision Brand® precut slotted shims are made from a 300 series stainless steel that resists rust and corrosion. Precut shims have tabs that makes shim placement easier and safer, while eliminating the need to place hands under the machinery during installation or removal of shim. Each 75mm x 75mm motor shim has a slot size of 22mm and can be used for bolt sizes up to a maximum of M22. Each shim is marked with thickness in metric. Precision Brand® slotted shim is the best way to solve alignment and leveling problems on motors, pumps, generators, and other plant machinery. Precut slotted shims are economical, safe, and accurate. Reduce labor costs by eliminating hand cutting and reduce downtime by eliminating shim preparation.&nbsp;
Product Description: Precut Slotted Shim
Material: 300 Series Stainless Steel
Size: B (75 mm x 75 mm)
Length A: 75 mm
Thickness: 0.025 mm to 2mm
Groove G: 22 mm
For Bolt Size: M22
Quantity Per Package: 10 Pieces

Precut Slotted Shim, 75mm X 75mm, 0.025mm to 2mm, 300 Series Stainless Steel, Pack of 10 Pieces

precut slotted shim, 75mm 75mm, 0.025mm 2mm, 300 series stainless steel, pack 10 pieces shim beralur prapotong, 0,025mm hingga baja tahan karat seri 300, kemasan buah precision brand berslot keluli siri pek keping brand/精密品牌 预切开槽垫片，75 毫米 75 毫米，0.025 毫米至 毫米，300 系列不锈钢，10 件装 精密品牌