Bikeservice

Druck

FLUKE

Lumberg Automation

Pneumatic Air Tools & Equipments

pneumatic-air-tools-equipments

Air Compressors & Inflators

air-compressors-inflators

Test & Measurement

test-measurement

Calibrators

calibrators

Pressure Measurement

pressure-measurement

Industrial Automation and Control

industrial-automation-and-control

Safety IO Modules

safety-io-modules

Weight, Force & Pressure Gauges

weight-force-pressure-gauges

Fluke 718 300G -850mbar to 20bar Pressure Calibrator

• Pressure Source and Milliamp Measurement to calibrate and maintain almost any pressure device
• Integrated pump is easily cleaned when accidently exposed to fluids that reduces cost of ownership and repairs and enables servicing the pump in the field
• Error % calculation for quicker pass/fail decision making in the field
• Best in class mA accuracy of 0.015% for better measurement confidence and workload coverage
• Min/Max/Hold to capture changing measurements
• Switch test feature for quicker and more accurate pressure switch testing
1G:- Range: -1 to 1psi, -68.9 mbar to 68.9 mbar, -6.89 to 6.89 kPa)
30G:- Range: -12 psi to 30 psi, (-850 mbar to 2 bar, -85 to 206.84 kPa)
300G:- Range -12 psi to 300 psi, (-850 mbar to 20 bar, -85 to 2068.42 kPa)
• For measuring overpressure and vacuum with an internal sensor
• Suitable for non-corrosive gases
• Pressure / vacuum hand pump with fine adjustment and relief valve (helps to protect the pump)
• Select from numerous technical units for the pressure
• Simultaneous measurement of pressure and current for simple P/I or I/P testing
• 24 V loop supply
• Zero and damp functions
• Test functions for push button switch: set, reset, dead zone
• New 1 and 300 PSI pressure ranges mean fewer extra tools required
• Rugged can withstand 1 m drop test
• 9 V battery,
• Dimensions 216 x 94 x 66 mm
• Weight 992 g
• LCD display


CSA C22.2 no. 1010.1: 1992, IEC 61010, CAT I 30V

Fluke 718, holster, TL75 test leads, AC72 crocodile clips, two 9 V batteries, instruction manual

FLUKE Pressure Calibrator, 30V Voltage Rating, 24V Loop Power Supply - 718 Series - FLUKE-718 300G

Want to pump up the pressure in your system but need an easy way to do it safely? Use this pressure calibrator from FLUKE. It measures pressures in non-corrosive gas and liquid systems between -850 mbar and 20 bar to ensure everything runs smoothly. Thanks to the small 1 mbar resolution, you get highly accurate results every time. For peace of mind, the built-in vacuum hand pump and bleed valve protect your device from damage during testing. Quickly flip through ten different pressure unit measurements to fit your equipment's requirements like a glove.


• Performs in extreme -10°C to +55°C temperatures to suit use in demanding conditions
• Battery life of four to 20 hours for cable-free operation
• Slim dimensions of 94 (W) x 216 (L) x 66mm (H), so it's comfortable to hold during field testing


• Automotive industry
• HVAC systems
• Manufacturing sector 

<h3 class="md-block-header-three">Fluke 718 300G -850mbar to 20bar Pressure Calibrator</h3><ul class="md-block-unordered-list-item"><li> Maximum Pressure Measurement	20bar</li><li>Minimum Pressure Measurement	-850mbar</li><li>Resolution	1 mbar</li><li>Data Logging	No</li><li>Model Number p	718</li><li>Current Loop Measurement	Yes</li><li>Maximum Operating Temperature	+55°C</li><li>Minimum Operating Temperature	-10°C</li><li>Weight	992g</li><li>Dimensions	216 x 94 x 66mm</li><li>Height	66mm</li><li>Length	216mm</li><li>Width	94mm</li></ul>Features and Benefits• Pressure Source and Milliamp Measurement to calibrate and maintain almost any pressure device • Integrated pump is easily cleaned when accidently exposed to fluids that reduces cost of ownership and repairs and enables servicing the pump in the field • Error % calculation for quicker pass/fail decision making in the field • Best in class mA accuracy of 0.015% for better measurement confidence and workload coverage • Min/Max/Hold to capture changing measurements • Switch test feature for quicker and more accurate pressure switch testing 1G:- Range: -1 to 1psi, -68.9 mbar to 68.9 mbar, -6.89 to 6.89 kPa) 30G:- Range: -12 psi to 30 psi, (-850 mbar to 2 bar, -85 to 206.84 kPa) 300G:- Range -12 psi to 300 psi, (-850 mbar to 20 bar, -85 to 2068.42 kPa) • For measuring overpressure and vacuum with an internal sensor • Suitable for non-corrosive gases • Pressure / vacuum hand pump with fine adjustment and relief valve (helps to protect the pump) • Select from numerous technical units for the pressure • Simultaneous measurement of pressure and current for simple P/I or I/P testing • 24 V loop supply • Zero and damp functions • Test functions for push button switch: set, reset, dead zone • New 1 and 300 PSI pressure ranges mean fewer extra tools required • Rugged can withstand 1 m drop test • 9 V battery, • Dimensions 216 x 94 x 66 mm • Weight 992 g • LCD display StandardsCSA C22.2 no. 1010.1: 1992, IEC 61010, CAT I 30VSupplied withFluke 718, holster, TL75 test leads, AC72 crocodile clips, two 9 V batteries, instruction manualFLUKE Pressure Calibrator, 30V Voltage Rating, 24V Loop Power Supply - 718 Series - FLUKE-718 300GWant to pump up the pressure in your system but need an easy way to do it safely? Use this pressure calibrator from FLUKE. It measures pressures in non-corrosive gas and liquid systems between -850 mbar and 20 bar to ensure everything runs smoothly. Thanks to the small 1 mbar resolution, you get highly accurate results every time. For peace of mind, the built-in vacuum hand pump and bleed valve protect your device from damage during testing. Quickly flip through ten different pressure unit measurements to fit your equipment&#x27;s requirements like a glove. Features &amp; Benefits• Performs in extreme -10°C to +55°C temperatures to suit use in demanding conditions • Battery life of four to 20 hours for cable-free operation • Slim dimensions of 94 (W) x 216 (L) x 66mm (H), so it&#x27;s comfortable to hold during field testing Applications• Automotive industry • HVAC systems • Manufacturing sector

<h3>Fluke 718 300G -850mbar to 20bar Pressure Calibrator</h3>
<ul>
<li>&nbsp;Maximum Pressure Measurement	20bar</li>
<li>Minimum Pressure Measurement	-850mbar</li>
<li>Resolution	1 mbar</li>
<li>Data Logging	No</li>
<li>Model Number p	718</li>
<li>Current Loop Measurement	Yes</li>
<li>Maximum Operating Temperature	+55°C</li>
<li>Minimum Operating Temperature	-10°C</li>
<li>Weight	992g</li>
<li>Dimensions	216 x 94 x 66mm</li>
<li>Height	66mm</li>
<li>Length	216mm</li>
<li>Width	94mm</li>
</ul>
Features and Benefits
• Pressure Source and Milliamp Measurement to calibrate and maintain almost any pressure device 
• Integrated pump is easily cleaned when accidently exposed to fluids that reduces cost of ownership and repairs and enables servicing the pump in the field 
• Error % calculation for quicker pass/fail decision making in the field 
• Best in class mA accuracy of 0.015% for better measurement confidence and workload coverage 
• Min/Max/Hold to capture changing measurements 
• Switch test feature for quicker and more accurate pressure switch testing 
1G:- Range: -1 to 1psi, -68.9 mbar to 68.9 mbar, -6.89 to 6.89 kPa) 
30G:- Range: -12 psi to 30 psi, (-850 mbar to 2 bar, -85 to 206.84 kPa) 
300G:- Range -12 psi to 300 psi, (-850 mbar to 20 bar, -85 to 2068.42 kPa) 
• For measuring overpressure and vacuum with an internal sensor 
• Suitable for non-corrosive gases 
• Pressure / vacuum hand pump with fine adjustment and relief valve (helps to protect the pump) 
• Select from numerous technical units for the pressure 
• Simultaneous measurement of pressure and current for simple P/I or I/P testing 
• 24 V loop supply 
• Zero and damp functions 
• Test functions for push button switch: set, reset, dead zone 
• New 1 and 300 PSI pressure ranges mean fewer extra tools required 
• Rugged can withstand 1 m drop test 
• 9 V battery, 
• Dimensions 216 x 94 x 66 mm 
• Weight 992 g 
• LCD display 

Standards
CSA C22.2 no. 1010.1: 1992, IEC 61010, CAT I 30V
Supplied with
Fluke 718, holster, TL75 test leads, AC72 crocodile clips, two 9 V batteries, instruction manual
FLUKE Pressure Calibrator, 30V Voltage Rating, 24V Loop Power Supply - 718 Series - FLUKE-718 300G
Want to pump up the pressure in your system but need an easy way to do it safely? Use this pressure calibrator from FLUKE. It measures pressures in non-corrosive gas and liquid systems between -850 mbar and 20 bar to ensure everything runs smoothly. Thanks to the small 1 mbar resolution, you get highly accurate results every time. For peace of mind, the built-in vacuum hand pump and bleed valve protect your device from damage during testing. Quickly flip through ten different pressure unit measurements to fit your equipment's requirements like a glove. 

Features &amp; Benefits
• Performs in extreme -10°C to +55°C temperatures to suit use in demanding conditions 
• Battery life of four to 20 hours for cable-free operation 
• Slim dimensions of 94 (W) x 216 (L) x 66mm (H), so it's comfortable to hold during field testing 

Applications
• Automotive industry 
• HVAC systems 
• Manufacturing sector&nbsp;

718 Series Pressure Calibrator Users Manual

717/718/718Ex/719 Pressure Calibrators Data Sheet

Datasheet

Brochure - Pressure Calibration

Selection Guide - FLUKE-718 300G

RS Pro

SCHNEIDER ELECTRIC

Fluke Networks

Abus

Screw

O Ring

Surface Mount Resistors

Circular Connectors

Contactors

Bolts

Panel Mount Indicators 

Molded Case Circuit Breakers - MCCBs

Junction & Enclosure Box

Electrical Wire 

RS Components ETH SG

buyerIntroduction

fluke 718 300g -850mbar 20bar pressure calibrator kalibrator tekanan 850mbar hingga measurement pengukuran pengukur fluke/福禄克 压力校准器 福禄克

fluke-718-300g-850mbar-to-20bar-pressure-calibrator

Model: DPI610E-SPC Pneumatic hazardous area 
Pressure Range :  
- 350 mbar/5 psi/35 kPa  
- 1 bar/15 psi/100 kPa  
- 2 bar/30 psi/200 kPa  
- 3.5 bar/50 psi/350 kPa  
- 7 bar/100 psi/700 kPa  
- 10 bar/150 psi/1000 kPa  
- 20 bar/300 psi/2 MPa  
- 35 bar/500 psi/3.5 MPa   
c/w 1m Hose

The DPI610E handheld pressure calibrator is the latest and the sixth generation of the DPI600 family. The DPI610E combines effortless pressure measurement and generation, signal measurement and loop power with significantly improved pump capabilities and a powerful touch and button user interface.  

With a robust design, the unit has been engineered for instrument technicians, using input from those working in the field. It is an ideal solution to your test and calibration application.  

Features 
- The complete pressure calibration tool provides pressure: 
> Vacuum to 35 bar/500 psi/3.5 MPa pneumatic pressures with inbuilt barometer for accurate pseudo pressure measurements 
> Up to 1000 bar/15000 psi/100 MPa hydraulic pressures 
- HART as standard on all versions 
- Best in class pressure accuracy: Total 1 year uncertainty down to 0.025% full scale (FS) over temperature range of -10°C to +50°C - Integral calibration record with calibration due countdown
- Robust, handheld design with backlit high-contrast display 
- Hazardous area (Intrinsically safe) version available 
- Optional remote plug and play pressure sensor (PM700E) and Resistance Temperature Detector (RTD-INTERFACE) 
- Minimise in-the-field leaks with quick-fit pressure adapters and hoses 
- Full data logging and local documenting capabilities included

Model: DPI610E-SPC Pneumatic hazardous area Pressure Range : - 350 mbar/5 psi/35 kPa - 1 bar/15 psi/100 kPa - 2 bar/30 psi/200 kPa - 3.5 bar/50 psi/350 kPa - 7 bar/100 psi/700 kPa - 10 bar/150 psi/1000 kPa - 20 bar/300 psi/2 MPa - 35 bar/500 psi/3.5 MPa c/w 1m HoseThe DPI610E handheld pressure calibrator is the latest and the sixth generation of the DPI600 family. The DPI610E combines effortless pressure measurement and generation, signal measurement and loop power with significantly improved pump capabilities and a powerful touch and button user interface. With a robust design, the unit has been engineered for instrument technicians, using input from those working in the field. It is an ideal solution to your test and calibration application. Features - The complete pressure calibration tool provides pressure: &gt; Vacuum to 35 bar/500 psi/3.5 MPa pneumatic pressures with inbuilt barometer for accurate pseudo pressure measurements &gt; Up to 1000 bar/15000 psi/100 MPa hydraulic pressures - HART as standard on all versions - Best in class pressure accuracy: Total 1 year uncertainty down to 0.025% full scale (FS) over temperature range of -10°C to +50°C - Integral calibration record with calibration due countdown - Robust, handheld design with backlit high-contrast display - Hazardous area (Intrinsically safe) version available - Optional remote plug and play pressure sensor (PM700E) and Resistance Temperature Detector (RTD-INTERFACE) - Minimise in-the-field leaks with quick-fit pressure adapters and hoses - Full data logging and local documenting capabilities included

Model: DPI610E-SPC Pneumatic hazardous area 
Pressure Range : 
- 350 mbar/5 psi/35 kPa 
- 1 bar/15 psi/100 kPa 
- 2 bar/30 psi/200 kPa 
- 3.5 bar/50 psi/350 kPa 
- 7 bar/100 psi/700 kPa 
- 10 bar/150 psi/1000 kPa 
- 20 bar/300 psi/2 MPa 
- 35 bar/500 psi/3.5 MPa 
c/w 1m Hose
The DPI610E handheld pressure calibrator is the latest and the sixth generation of the DPI600 family. The DPI610E combines effortless pressure measurement and generation, signal measurement and loop power with significantly improved pump capabilities and a powerful touch and button user interface. 
 
With a robust design, the unit has been engineered for instrument technicians, using input from those working in the field. It is an ideal solution to your test and calibration application. 
 
Features 
- The complete pressure calibration tool provides pressure: 
&gt; Vacuum to 35 bar/500 psi/3.5 MPa pneumatic pressures with inbuilt barometer for accurate pseudo pressure measurements 
&gt; Up to 1000 bar/15000 psi/100 MPa hydraulic pressures 
- HART as standard on all versions 
- Best in class pressure accuracy: Total 1 year uncertainty down to 0.025% full scale (FS) over temperature range of -10°C to +50°C - Integral calibration record with calibration due countdown 
- Robust, handheld design with backlit high-contrast display 
- Hazardous area (Intrinsically safe) version available 
- Optional remote plug and play pressure sensor (PM700E) and Resistance Temperature Detector (RTD-INTERFACE) 
- Minimise in-the-field leaks with quick-fit pressure adapters and hoses 
- Full data logging and local documenting capabilities included

DPI610E

Adelene

Others

Baker Hughes

Senze Instruments

ADDITEL

Daihan

Isuzu

Other Measuring Tools

Humidity & Temperature

Hand Pumps

Electrical Power Testing

Pumps Accessories

Multimeters

Air Quality Meters

Meteorological Instrumentation & Equipment

Adelene Teow

Druck Handheld Pressure Calibrator (pneumatic Hazardous Area)

druck handheld pressure calibrator (pneumatic hazardous area) kalibrator tekanan genggam (area berbahaya pneumatik) measurement pengukuran penentukur tangan (kawasan pengukur druck/德鲁克 手持式压力校准器（气动危险区域） 德鲁克

druck-handheld-pressure-calibrator-pneumatic-hazardous-area

DPI610E-SPC-35bar

Yellow

Model: DPI610E-PC Pneumatic
Pressure Range: 
- 350 mbar/5 psi/35 kPa 
- 1 bar/15 psi/100 kPa 
- 2 bar/30 psi/200 kPa 
- 3.5 bar/50 psi/350 kPa 
- 7 bar/100 psi/700 kPa 
- 10 bar/150 psi/1000 kPa 
- 20 bar/300 psi/2 MPa 
c/w 1m Hose  

The DPI610E handheld pressure calibrator is the latest and the sixth generation of the DPI600 family. The DPI610E combines effortless pressure measurement and generation, signal measurement and loop power with significantly improved pump capabilities and a powerful touch and button user interface.

With a robust design, the unit has been engineered for instrument technicians, using input from those working in the field. It is an ideal solution to your test and calibration application.

Features
- The complete pressure calibration tool provides pressure:
> Vacuum to 35 bar/500 psi/3.5 MPa pneumatic pressures with inbuilt barometer for accurate pseudo pressure measurements
> Up to 1000 bar/15000 psi/100 MPa hydraulic pressures
- HART as standard on all versions
- Best in class pressure accuracy: Total 1 year uncertainty down to 0.025% full scale (FS) over temperature range of -10°C to +50°C
- Integral calibration record with calibration due countdown
- Robust, handheld design with backlit high-contrast display
- Hazardous area (Intrinsically safe) version available
- Optional remote plug and play pressure sensor (PM700E) and Resistance Temperature Detector (RTD-INTERFACE)
- Minimise in-the-field leaks with quick-fit pressure adapters and hoses
- Full data logging and local documenting capabilities included

Model: DPI610E-PC Pneumatic Pressure Range: - 350 mbar/5 psi/35 kPa - 1 bar/15 psi/100 kPa - 2 bar/30 psi/200 kPa - 3.5 bar/50 psi/350 kPa - 7 bar/100 psi/700 kPa - 10 bar/150 psi/1000 kPa - 20 bar/300 psi/2 MPa c/w 1m Hose The DPI610E handheld pressure calibrator is the latest and the sixth generation of the DPI600 family. The DPI610E combines effortless pressure measurement and generation, signal measurement and loop power with significantly improved pump capabilities and a powerful touch and button user interface. With a robust design, the unit has been engineered for instrument technicians, using input from those working in the field. It is an ideal solution to your test and calibration application. Features - The complete pressure calibration tool provides pressure: &gt; Vacuum to 35 bar/500 psi/3.5 MPa pneumatic pressures with inbuilt barometer for accurate pseudo pressure measurements &gt; Up to 1000 bar/15000 psi/100 MPa hydraulic pressures - HART as standard on all versions - Best in class pressure accuracy: Total 1 year uncertainty down to 0.025% full scale (FS) over temperature range of -10°C to +50°C - Integral calibration record with calibration due countdown - Robust, handheld design with backlit high-contrast display - Hazardous area (Intrinsically safe) version available - Optional remote plug and play pressure sensor (PM700E) and Resistance Temperature Detector (RTD-INTERFACE) - Minimise in-the-field leaks with quick-fit pressure adapters and hoses - Full data logging and local documenting capabilities included

Model: DPI610E-PC Pneumatic 
Pressure Range: 
- 350 mbar/5 psi/35 kPa 
- 1 bar/15 psi/100 kPa 
- 2 bar/30 psi/200 kPa 
- 3.5 bar/50 psi/350 kPa 
- 7 bar/100 psi/700 kPa 
- 10 bar/150 psi/1000 kPa 
- 20 bar/300 psi/2 MPa 
c/w 1m Hose&nbsp;&nbsp;
The DPI610E handheld pressure calibrator is the latest and the sixth generation of the DPI600 family. The DPI610E combines effortless pressure measurement and generation, signal measurement and loop power with significantly improved pump capabilities and a powerful touch and button user interface. 
 
With a robust design, the unit has been engineered for instrument technicians, using input from those working in the field. It is an ideal solution to your test and calibration application. 
 
Features 
- The complete pressure calibration tool provides pressure: 
&gt; Vacuum to 35 bar/500 psi/3.5 MPa pneumatic pressures with inbuilt barometer for accurate pseudo pressure measurements 
&gt; Up to 1000 bar/15000 psi/100 MPa hydraulic pressures 
- HART as standard on all versions 
- Best in class pressure accuracy: Total 1 year uncertainty down to 0.025% full scale (FS) over temperature range of -10°C to +50°C 
- Integral calibration record with calibration due countdown 
- Robust, handheld design with backlit high-contrast display 
- Hazardous area (Intrinsically safe) version available 
- Optional remote plug and play pressure sensor (PM700E) and Resistance Temperature Detector (RTD-INTERFACE) 
- Minimise in-the-field leaks with quick-fit pressure adapters and hoses 
- Full data logging and local documenting capabilities included

Druck Handheld Pressure Calibrator (pneumatic)

druck handheld pressure calibrator (pneumatic) kalibrator tekanan genggam (pneumatik) measurement pengukuran penentukur tangan pengukur druck/德鲁克 手持式压力校准器（气动） 德鲁克

druck-handheld-pressure-calibrator-pneumatic

FLUKE 717 30G -850mbar to 2bar Pressure Calibrator

 Fluke 717 Series pressure calibrators offer performance, durability, and reliability. They are compact, lightweight, and easy to carry and use (with well-designed push button interface). They are EMI-tolerant, dust and splash resistant and have a removable battery door for quick battery changes.


717 30G – 623-9822, 12 to 30 psi (-850 mbar to 2 bar, -85 to 207 kPa)

717 300G – 623-9838, 12 to 300 psi, (-850 mbar to 20 bar, -85 to 2068.4 kPa)

717 100G – 757-7386, 12 to 100 psi, (-850 mbar to 7 bar, -85 to 689.48 kPa)

717 10000G – 757-7386, 0 to 1000 psi, (0 mbar to 69 bar, 0 to 6894.8 kPa)


For measuring overpressure and vacuum with an internal sensor

Suitable for non-corrosive gases and liquids

Select from numerous technical units for the pressure

Simultaneous measurement of pressure and current for simple P/I or I/P testing

Zero, min. / max., hold and damp functions

Test functions for push button switches: adjusting, resetting, dead zone

Fluke 717, holster, TL75 test leads, AC72 crocodile clips, 9 V battery, instruction manual

FLUKE Pressure Calibrator, 30V Maximum Voltage, EMI-Tolerant - 717 Series - FLUKE-717 30G

Keep your systems in tip-top shape with this pressure calibrator from FLUKE. It's designed to measure and adjust the overpressure and vacuum of devices such as gauges and transducers. A wide measurement range between -850mbar and 2 bar means this is a suitable option for low-pressure applications such as HVAC systems. A resolution of 0.1mbar allows you to measure very small changes in pressure with pinpoint precision. The calibrator weighs just 600g, so it's a piece of cake to carry around your factory floor.
• Over pressure of 2xFS boosts safety
• 24-volt loop power supply provides power to the measured instrument, simplifying the calibration process
• Supports a wide range of pressure units including psi, kPa and inHg
• Broad operating temperature range between -10°C and +55°C to endure tough conditions


• Heating systems
• Oil and gas processing
• Pharmaceuticals manufacture


What's included with this pressure calibrator?

As it's supplied with a yellow holster, test leads, crocodile clips, a 9V battery and a CD instruction manual, you can get to work straight away.


It has a compact design with dimensions of 201 (L) x 98 (W) x 52mm (H), so it fits comfortably in your hands.
 

<h3 class="md-block-header-three">FLUKE 717 30G -850mbar to 2bar Pressure Calibrator</h3> Fluke 717 Series pressure calibrators offer performance, durability, and reliability. They are compact, lightweight, and easy to carry and use (with well-designed push button interface). They are EMI-tolerant, dust and splash resistant and have a removable battery door for quick battery changes. Fluke 717 series includes:717 30G – 623-9822, 12 to 30 psi (-850 mbar to 2 bar, -85 to 207 kPa)717 300G – 623-9838, 12 to 300 psi, (-850 mbar to 20 bar, -85 to 2068.4 kPa)717 100G – 757-7386, 12 to 100 psi, (-850 mbar to 7 bar, -85 to 689.48 kPa)717 10000G – 757-7386, 0 to 1000 psi, (0 mbar to 69 bar, 0 to 6894.8 kPa) <h3 class="md-block-header-three">Features and Benefits:</h3><ul class="md-block-unordered-list-item"><li>For measuring overpressure and vacuum with an internal sensor</li><li>Suitable for non-corrosive gases and liquids</li><li>Select from numerous technical units for the pressure</li><li>Simultaneous measurement of pressure and current for simple P/I or I/P testing</li><li>24 V loop supply</li><li>Zero, min. / max., hold and damp functions</li><li>Test functions for push button switches: adjusting, resetting, dead zone</li></ul><h3 class="md-block-header-three">Standards</h3>CSA C22.2 no. 1010.1: 1992, IEC 61010, CAT I 30V<h3 class="md-block-header-three">Supplied with</h3>Fluke 717, holster, TL75 test leads, AC72 crocodile clips, 9 V battery, instruction manual<h3 class="md-block-header-three">FLUKE Pressure Calibrator, 30V Maximum Voltage, EMI-Tolerant - 717 Series - FLUKE-717 30G</h3>Keep your systems in tip-top shape with this pressure calibrator from FLUKE. It&#x27;s designed to measure and adjust the overpressure and vacuum of devices such as gauges and transducers. A wide measurement range between -850mbar and 2 bar means this is a suitable option for low-pressure applications such as HVAC systems. A resolution of 0.1mbar allows you to measure very small changes in pressure with pinpoint precision. The calibrator weighs just 600g, so it&#x27;s a piece of cake to carry around your factory floor. • Over pressure of 2xFS boosts safety • 24-volt loop power supply provides power to the measured instrument, simplifying the calibration process • Supports a wide range of pressure units including psi, kPa and inHg • Broad operating temperature range between -10°C and +55°C to endure tough conditions <h3 class="md-block-header-three">Applications</h3>• Heating systems • Oil and gas processing • Pharmaceuticals manufacture <h3 class="md-block-header-three">What&#x27;s included with this pressure calibrator?</h3>As it&#x27;s supplied with a yellow holster, test leads, crocodile clips, a 9V battery and a CD instruction manual, you can get to work straight away. <h3 class="md-block-header-three">How big is this calibrator?</h3>It has a compact design with dimensions of 201 (L) x 98 (W) x 52mm (H), so it fits comfortably in your hands.

<h3>FLUKE 717 30G -850mbar to 2bar Pressure Calibrator</h3>
&nbsp;Fluke 717 Series pressure calibrators offer performance, durability, and reliability. They are compact, lightweight, and easy to carry and use (with well-designed push button interface). They are EMI-tolerant, dust and splash resistant and have a removable battery door for quick battery changes. 

Fluke 717 series includes:
717 30G – 623-9822, 12 to 30 psi (-850 mbar to 2 bar, -85 to 207 kPa)
717 300G – 623-9838, 12 to 300 psi, (-850 mbar to 20 bar, -85 to 2068.4 kPa)
717 100G – 757-7386, 12 to 100 psi, (-850 mbar to 7 bar, -85 to 689.48 kPa)
717 10000G – 757-7386, 0 to 1000 psi, (0 mbar to 69 bar, 0 to 6894.8 kPa) 

<h3>Features and Benefits:</h3>
<ul>
<li>For measuring overpressure and vacuum with an internal sensor</li>
<li>Suitable for non-corrosive gases and liquids</li>
<li>Select from numerous technical units for the pressure</li>
<li>Simultaneous measurement of pressure and current for simple P/I or I/P testing</li>
<li>24 V loop supply</li>
<li>Zero, min. / max., hold and damp functions</li>
<li>Test functions for push button switches: adjusting, resetting, dead zone</li>
</ul>
<h3>Standards</h3>
CSA C22.2 no. 1010.1: 1992, IEC 61010, CAT I 30V
<h3>Supplied with</h3>
Fluke 717, holster, TL75 test leads, AC72 crocodile clips, 9 V battery, instruction manual
<h3>FLUKE Pressure Calibrator, 30V Maximum Voltage, EMI-Tolerant - 717 Series - FLUKE-717 30G</h3>
Keep your systems in tip-top shape with this pressure calibrator from FLUKE. It's designed to measure and adjust the overpressure and vacuum of devices such as gauges and transducers. A wide measurement range between -850mbar and 2 bar means this is a suitable option for low-pressure applications such as HVAC systems. A resolution of 0.1mbar allows you to measure very small changes in pressure with pinpoint precision. The calibrator weighs just 600g, so it's a piece of cake to carry around your factory floor. 
• Over pressure of 2xFS boosts safety 
• 24-volt loop power supply provides power to the measured instrument, simplifying the calibration process 
• Supports a wide range of pressure units including psi, kPa and inHg 
• Broad operating temperature range between -10°C and +55°C to endure tough conditions 

<h3>Applications</h3>
• Heating systems 
• Oil and gas processing 
• Pharmaceuticals manufacture 

<h3>What's included with this pressure calibrator?</h3>
As it's supplied with a yellow holster, test leads, crocodile clips, a 9V battery and a CD instruction manual, you can get to work straight away. 

<h3>How big is this calibrator?</h3>
It has a compact design with dimensions of 201 (L) x 98 (W) x 52mm (H), so it fits comfortably in your hands. 
&nbsp;

fluke 717 30g -850mbar 2bar pressure calibrator kalibrator tekanan 850mbar hingga measurement pengukuran pengukur fluke/福禄克 压力校准器 福禄克

fluke-717-30g-850mbar-to-2bar-pressure-calibrator

Fluke 718 30 G -850mbar to 2bar Pressure Calibrator

CSA C22.2 no. 1010.1: 1992, IEC 61010, CAT I 30V 

<h3 class="md-block-header-three">Fluke 718 30 G -850mbar to 2bar Pressure Calibrator</h3><ul class="md-block-unordered-list-item"><li> Maximum Pressure Measurement	2bar</li><li>Minimum Pressure Measurement	-850mbar</li><li>Resolution	0.1 mbar</li><li>Model Number p	718</li><li>Current Loop Measurement	Yes</li><li>Maximum Operating Temperature	+55°C</li><li>Minimum Operating Temperature	-10°C</li><li>Weight	992g</li><li>Dimensions	216 x 94 x 66mm</li><li>Height	66mm</li><li>Length	216mm</li><li>Width	94mm</li></ul>Features and Benefits• Pressure Source and Milliamp Measurement to calibrate and maintain almost any pressure device • Integrated pump is easily cleaned when accidently exposed to fluids that reduces cost of ownership and repairs and enables servicing the pump in the field • Error % calculation for quicker pass/fail decision making in the field • Best in class mA accuracy of 0.015% for better measurement confidence and workload coverage • Min/Max/Hold to capture changing measurements • Switch test feature for quicker and more accurate pressure switch testing 1G:- Range: -1 to 1psi, -68.9 mbar to 68.9 mbar, -6.89 to 6.89 kPa) 30G:- Range: -12 psi to 30 psi, (-850 mbar to 2 bar, -85 to 206.84 kPa) 300G:- Range -12 psi to 300 psi, (-850 mbar to 20 bar, -85 to 2068.42 kPa) • For measuring overpressure and vacuum with an internal sensor • Suitable for non-corrosive gases • Pressure / vacuum hand pump with fine adjustment and relief valve (helps to protect the pump) • Select from numerous technical units for the pressure • Simultaneous measurement of pressure and current for simple P/I or I/P testing • 24 V loop supply • Zero and damp functions • Test functions for push button switch: set, reset, dead zone • New 1 and 300 PSI pressure ranges mean fewer extra tools required • Rugged can withstand 1 m drop test • 9 V battery, • Dimensions 216 x 94 x 66 mm • Weight 992 g • LCD display StandardsCSA C22.2 no. 1010.1: 1992, IEC 61010, CAT I 30V

<h3>Fluke 718 30 G -850mbar to 2bar Pressure Calibrator</h3>
<ul>
<li>&nbsp;Maximum Pressure Measurement	2bar</li>
<li>Minimum Pressure Measurement	-850mbar</li>
<li>Resolution	0.1 mbar</li>
<li>Model Number p	718</li>
<li>Current Loop Measurement	Yes</li>
<li>Maximum Operating Temperature	+55°C</li>
<li>Minimum Operating Temperature	-10°C</li>
<li>Weight	992g</li>
<li>Dimensions	216 x 94 x 66mm</li>
<li>Height	66mm</li>
<li>Length	216mm</li>
<li>Width	94mm</li>
</ul>
Features and Benefits
• Pressure Source and Milliamp Measurement to calibrate and maintain almost any pressure device 
• Integrated pump is easily cleaned when accidently exposed to fluids that reduces cost of ownership and repairs and enables servicing the pump in the field 
• Error % calculation for quicker pass/fail decision making in the field 
• Best in class mA accuracy of 0.015% for better measurement confidence and workload coverage 
• Min/Max/Hold to capture changing measurements 
• Switch test feature for quicker and more accurate pressure switch testing 
1G:- Range: -1 to 1psi, -68.9 mbar to 68.9 mbar, -6.89 to 6.89 kPa) 
30G:- Range: -12 psi to 30 psi, (-850 mbar to 2 bar, -85 to 206.84 kPa) 
300G:- Range -12 psi to 300 psi, (-850 mbar to 20 bar, -85 to 2068.42 kPa) 
• For measuring overpressure and vacuum with an internal sensor 
• Suitable for non-corrosive gases 
• Pressure / vacuum hand pump with fine adjustment and relief valve (helps to protect the pump) 
• Select from numerous technical units for the pressure 
• Simultaneous measurement of pressure and current for simple P/I or I/P testing 
• 24 V loop supply 
• Zero and damp functions 
• Test functions for push button switch: set, reset, dead zone 
• New 1 and 300 PSI pressure ranges mean fewer extra tools required 
• Rugged can withstand 1 m drop test 
• 9 V battery, 
• Dimensions 216 x 94 x 66 mm 
• Weight 992 g 
• LCD display 

Standards
CSA C22.2 no. 1010.1: 1992, IEC 61010, CAT I 30V&nbsp;

fluke 718 30 -850mbar 2bar pressure calibrator kalibrator tekanan 850mbar hingga measurement pengukuran pengukur fluke/福禄克 压力校准器 福禄克

fluke-718-30-g-850mbar-to-2bar-pressure-calibrator

Fluke 718 Ex -830mbar to 20bar Pressure Calibrator

Pressure calibrator designed for use in potentially explosive areas.
Pressure sensor input of 20 bars full scale with 0.05% accuracy.
Built-in pressure / vacuum hand pump, with vernier and bleed valve.
Measures pressure up to 200 bar (using one of the eight intrinsically safe Fluke 700PEx pressure modules).
Current measurement with 0.02% accuracy and 0.001 mA resolution.
Supported units of pressure: psi, inH2O (4°C), inH2O (20°C), kPa, cmH2O (4°C), cmH2O (20°C), bar, mbar, kg/cm2, mmHg, inHg.
Pressure switch test function.
Zero, Min/Max and Hold display functions.
Compatible with non-corrosive gases.

ATEX II 1G EEx ia IIC T4 compliant, CSA I.S. Class I, Div. 1 Groups A-D, T4, EN 61326 2002-2, Class C

Protective red holster, TL75 test leads, set of test clips (red and black).

FLUKE Pressure Calibrator, -830mbar to 20 Bar Pressure Measurement Range, 0.015% Current Measuring Accuracy - 718 Series - FLUKE-718EX 300G

Need to ensure your devices won't crack under stress? Turn to this pressure calibrator from FLUKE. It has a wide measurement range of -830mbar to 20 bar, making it a versatile piece of kit. As it also gauges current, it lets you keep an eye on the all-around electrical performance of your system. A current measuring accuracy of 0.015% means you can count on it for precise results. Thanks to the unit's integrated vacuum hand pump, it's a cinch to bleed the valves and keep your calibrator squeaky clean.
• Safe for use in potentially explosive environments
• Wide operating temperature range between -10°C and +55°C for use in harsh conditions
• Compact dimensions of 216 (H) x 94 (W) x 66mm (D) for ease of handling

• Research and development labs
• Aerospace engineering
• Automotive manufacturing
• Medical equipment
 

<h3 class="md-block-header-three">Fluke 718 Ex -830mbar to 20bar Pressure Calibrator</h3><ul class="md-block-unordered-list-item"><li>Maximum Pressure Measurement	20bar</li><li>Minimum Pressure Measurement	-830mbar</li><li>Resolution	0.0001 bar</li><li>Pressure Port Type	Vacuum</li><li>Model Number p	718 EX</li><li>Intrinsically Safe	Yes</li><li>Current Loop Measurement	Yes</li><li>Maximum Operating Temperature	+55°C</li><li>Minimum Operating Temperature	-10°C</li><li>Weight	992g</li><li>Dimensions	216 x 94 x 66mm</li><li>Height	66mm</li><li>Length	216mm</li><li>Hazardous Area Certification	ATEX</li><li>Width	94mm</li></ul>Pressure calibrator designed for use in potentially explosive areas. Pressure sensor input of 20 bars full scale with 0.05% accuracy. Built-in pressure / vacuum hand pump, with vernier and bleed valve. Measures pressure up to 200 bar (using one of the eight intrinsically safe Fluke 700PEx pressure modules). Current measurement with 0.02% accuracy and 0.001 mA resolution. Supported units of pressure: psi, inH2O (4°C), inH2O (20°C), kPa, cmH2O (4°C), cmH2O (20°C), bar, mbar, kg/cm2, mmHg, inHg. Pressure switch test function. Zero, Min/Max and Hold display functions. Compatible with non-corrosive gases.StandardsATEX II 1G EEx ia IIC T4 compliant, CSA I.S. Class I, Div. 1 Groups A-D, T4, EN 61326 2002-2, Class CSupplied withProtective red holster, TL75 test leads, set of test clips (red and black).FLUKE Pressure Calibrator, -830mbar to 20 Bar Pressure Measurement Range, 0.015% Current Measuring Accuracy - 718 Series - FLUKE-718EX 300GNeed to ensure your devices won&#x27;t crack under stress? Turn to this pressure calibrator from FLUKE. It has a wide measurement range of -830mbar to 20 bar, making it a versatile piece of kit. As it also gauges current, it lets you keep an eye on the all-around electrical performance of your system. A current measuring accuracy of 0.015% means you can count on it for precise results. Thanks to the unit&#x27;s integrated vacuum hand pump, it&#x27;s a cinch to bleed the valves and keep your calibrator squeaky clean. • Safe for use in potentially explosive environments • Wide operating temperature range between -10°C and +55°C for use in harsh conditions • Compact dimensions of 216 (H) x 94 (W) x 66mm (D) for ease of handlingApplications• Research and development labs • Aerospace engineering • Automotive manufacturing • Medical equipment

<h3>Fluke 718 Ex -830mbar to 20bar Pressure Calibrator</h3>
<ul>
<li>Maximum Pressure Measurement	20bar</li>
<li>Minimum Pressure Measurement	-830mbar</li>
<li>Resolution	0.0001 bar</li>
<li>Pressure Port Type	Vacuum</li>
<li>Model Number p	718 EX</li>
<li>Intrinsically Safe	Yes</li>
<li>Current Loop Measurement	Yes</li>
<li>Maximum Operating Temperature	+55°C</li>
<li>Minimum Operating Temperature	-10°C</li>
<li>Weight	992g</li>
<li>Dimensions	216 x 94 x 66mm</li>
<li>Height	66mm</li>
<li>Length	216mm</li>
<li>Hazardous Area Certification	ATEX</li>
<li>Width	94mm</li>
</ul>
Pressure calibrator designed for use in potentially explosive areas. 
Pressure sensor input of 20 bars full scale with 0.05% accuracy. 
Built-in pressure / vacuum hand pump, with vernier and bleed valve. 
Measures pressure up to 200 bar (using one of the eight intrinsically safe Fluke 700PEx pressure modules). 
Current measurement with 0.02% accuracy and 0.001 mA resolution. 
Supported units of pressure: psi, inH2O (4°C), inH2O (20°C), kPa, cmH2O (4°C), cmH2O (20°C), bar, mbar, kg/cm2, mmHg, inHg. 
Pressure switch test function. 
Zero, Min/Max and Hold display functions. 
Compatible with non-corrosive gases.
Standards
ATEX II 1G EEx ia IIC T4 compliant, CSA I.S. Class I, Div. 1 Groups A-D, T4, EN 61326 2002-2, Class C
Supplied with
Protective red holster, TL75 test leads, set of test clips (red and black).
FLUKE Pressure Calibrator, -830mbar to 20 Bar Pressure Measurement Range, 0.015% Current Measuring Accuracy - 718 Series - FLUKE-718EX 300G
Need to ensure your devices won't crack under stress? Turn to this pressure calibrator from FLUKE. It has a wide measurement range of -830mbar to 20 bar, making it a versatile piece of kit. As it also gauges current, it lets you keep an eye on the all-around electrical performance of your system. A current measuring accuracy of 0.015% means you can count on it for precise results. Thanks to the unit's integrated vacuum hand pump, it's a cinch to bleed the valves and keep your calibrator squeaky clean. 
• Safe for use in potentially explosive environments 
• Wide operating temperature range between -10°C and +55°C for use in harsh conditions 
• Compact dimensions of 216 (H) x 94 (W) x 66mm (D) for ease of handling
Applications
• Research and development labs 
• Aerospace engineering 
• Automotive manufacturing 
• Medical equipment 
&nbsp;

Datasheet - FLUKE-718EX 300G

fluke 718 ex -830mbar 20bar pressure calibrator kalibrator tekanan 830mbar hingga measurement pengukuran pengukur fluke/福禄克 压力校准器 福禄克

fluke-718-ex-830mbar-to-20bar-pressure-calibrator

Lumberg Automation 934878007 0980 ESL 300-121 LioN-P, Profinet I/O Device, 16DIO (8x M12), M12 L-coded Power Supply, Metal, 60 Mm 

Product Family: I/O Systems: Active - Standalone

Power Connection (System Supply): M12 Power, 5-poles, L-coded

Protection Degree / IP Rating: IP65, IP67, IP69K

Dimensions (W x H x D): 60 mm x 31 mm x 200 mm

Ambient Temperature (Operation): -20 °C to 70 °C

Ambient Temperature (Storage/Transport): -25 °C to 85 °C

Permissible Humidity (Operation): 5 % ... 95 % (For UL applications max. 80 %)

Permissible Humidity (Storage/Transport): 5 % ... 95 % (For UL applications max. 80 %)

Air Pressure (Operation): 80 kPa … 106 kPa (up to 2000 m above sea level)

Air Pressure (Storage/Transport): 80 kPa … 106 kPa (up to 2000 m above sea level)

Protection Class: III, IEC 61140, EN 61140, VDE 0140-1

Pollution Degree: 3 acc. to EN 60664-1, VDE 0110-1

Mean Time To Failure (MTTF): 429 years, acc. to Telcordia SR-332 (2011) 20°C

Contact Base Material: M12, D-coded, CuSn, Gold-plated | M12 Power, L-coded, CuNi, Gold-plated

Mounting: 2 hole screw mounting. Use standard M4 x 25 / 30 screws with toothed lock washer (as per DIN 125) and self-locking nuts.

Fastening Torque (Fixing Screw): M4: 1 Nm

Fastening Torque (Ground Connection (FE)): M4: 1 Nm

Fastening Torque (Bus Connection): M12: 0.5 Nm

Fastening Torque (Power Connection): M12: 0.5 Nm

Fastening Torque (I/O Connection): M12: 0.5 Nm

Included in Delivery: Attachable Labels: 15x, Sealing Caps: 5x M12

Performance Class: RT (switch supports IRT)

Transmission Rate: Fast Ethernet (10/100 Mbit/s), Full Duplex

Transmission Method: 100 BASE-TX, with auto negotiation and auto crossing

Fast Startup (FSU): Supported, ≤ 1000 ms

Media Redundancy Protocol (MRP): Supported, MRP client

Easy Device Replacement: Supported, based on LLDP

Supported Network Protocols (Other): ARP, HTTP, Ping, SNMP V1, TCP/IP

Connection Module Supply Voltage: M12 Power, 5-poles, L-coded

Current Carrying Capacity of Connector: max. 16 A

Module Supply Voltage (Nominal): 24 V DC (SELV/PELV)

Module Supply Voltage (Range): 18 V DC to 30 V DC

Current Consumption (typ.): 120 mA (at 24 V DC)

Status Indicator (System Supply): LED green

Connection Sensor Supply Voltage: M12 Power, 5-poles, L-coded

Sensor Supply Voltage (Nominal): 24 V DC (SELV/PELV)

Sensor Supply Voltage (Range): 18 V DC to 30 V DC

Status Indicator (Sensor Supply): LED green

Connection Actuator Supply Voltage: via Module Supply Connection

Actuator Supply Voltage (Nominal): 24 V DC (SELV/PELV)

Actuator Supply Voltage (Range): 18 V DC to 30 V DC

Status Indicator (Actuator Supply): LED green

Number of Digital Input Channels: max. 16, universal

Sensor Current Supply: max. 500 mA per port

Nominal Voltage: 24 V DC via US (module power supply)

Input Voltage Range "0" signal: -3 V DC …+5 V DC

Input Voltage Range "1" signal: 11 V DC … 30 V DC

Protective Circuit: Electronically: Overload protection, short-circuit protection

Status Indicator (Inputs): LED white or yellow per channel

<h3 class="md-block-header-three">Lumberg Automation 934878007 0980 ESL 300-121 LioN-P, Profinet I/O Device, 16DIO (8x M12), M12 L-coded Power Supply, Metal, 60 Mm </h3><ul class="md-block-unordered-list-item"><li>Product Family: I/O Systems: Active - Standalone</li><li>Product Sub Family: LioN-P</li><li>Item Description: 0980 ESL 300-121</li><li>Device Type: I/O Module</li><li>Protocol: PROFINET</li><li>I/O Function: 16DIO</li><li>Bus Connection: M12, 4-poles, D-coded</li><li>Power Connection (System Supply): M12 Power, 5-poles, L-coded</li><li>I/O Connection: M12, 5-poles, A-coded</li><li>I/O Type: Digital In-/Output (Universal)</li></ul>General Data:<ul class="md-block-unordered-list-item"><li>Housing Material: Metal, Zinc Die-cast</li><li>Housing Plating: Nickel, matt</li><li>Housing Color: Grey Metallic</li><li>Protection Degree / IP Rating: IP65, IP67, IP69K</li><li>Potted: Yes</li><li>Dimensions (W x H x D): 60 mm x 31 mm x 200 mm</li><li>Weight: 500 g</li><li>Ambient Temperature (Operation): -20 °C to 70 °C</li><li>Ambient Temperature (Storage/Transport): -25 °C to 85 °C</li><li>Permissible Humidity (Operation): 5 % ... 95 % (For UL applications max. 80 %)</li><li>Permissible Humidity (Storage/Transport): 5 % ... 95 % (For UL applications max. 80 %)</li><li>Air Pressure (Operation): 80 kPa … 106 kPa (up to 2000 m above sea level)</li><li>Air Pressure (Storage/Transport): 80 kPa … 106 kPa (up to 2000 m above sea level)</li><li>Flammability Class: UL 94 (IEC 61010)</li><li>Protection Class: III, IEC 61140, EN 61140, VDE 0140-1</li><li>Pollution Degree: 3 acc. to EN 60664-1, VDE 0110-1</li><li>Vibration Resistance: 15 g / 5 -500 Hz</li><li>Shock Resistance: 50 g / 11ms</li><li>Mean Time To Failure (MTTF): 429 years, acc. to Telcordia SR-332 (2011) 20°C</li><li>Contact Base Material: M12, D-coded, CuSn, Gold-plated | M12 Power, L-coded, CuNi, Gold-plated</li><li>Contact Bearer Material: PA</li><li>O-Ring Material: FKM</li><li>Mounting: 2 hole screw mounting. Use standard M4 x 25 / 30 screws with toothed lock washer (as per DIN 125) and self-locking nuts.</li><li>Fastening Torque (Fixing Screw): M4: 1 Nm</li><li>Fastening Torque (Ground Connection (FE)): M4: 1 Nm</li><li>Fastening Torque (Bus Connection): M12: 0.5 Nm</li><li>Fastening Torque (Power Connection): M12: 0.5 Nm</li><li>Fastening Torque (I/O Connection): M12: 0.5 Nm</li><li>Included in Delivery: Attachable Labels: 15x, Sealing Caps: 5x M12</li></ul>PROFINET:<ul class="md-block-unordered-list-item"><li>Protocol: PROFINET</li><li>Connection: M12 LAN, 4-poles, D-coded</li><li>Number of Connections: 2</li><li>Netload Class: III</li><li>Specification: V2.3X</li><li>Conformance Class: C</li><li>Performance Class: RT (switch supports IRT)</li><li>Transmission Rate: Fast Ethernet (10/100 Mbit/s), Full Duplex</li><li>Transmission Method: 100 BASE-TX, with auto negotiation and auto crossing</li><li>Cycle Time / Update Rate: min. 1 ms</li><li>Addressing: DCP</li><li>Fast Startup (FSU): Supported, ≤ 1000 ms</li><li>Media Redundancy Protocol (MRP): Supported, MRP client</li><li>Shared Device: Not Supported</li><li>Topology Detection: LLDP, SNMP V1</li><li>Easy Device Replacement: Supported, based on LLDP</li><li>Supported Network Protocols (Other): ARP, HTTP, Ping, SNMP V1, TCP/IP</li></ul>Power Supply:<ul class="md-block-unordered-list-item"><li>Connection Module Supply Voltage: M12 Power, 5-poles, L-coded</li><li>Number of Connections: 2</li><li>Current Carrying Capacity of Connector: max. 16 A</li><li>Module Supply Voltage (Nominal): 24 V DC (SELV/PELV)</li><li>Module Supply Voltage (Range): 18 V DC to 30 V DC</li><li>Current Consumption (typ.): 120 mA (at 24 V DC)</li><li>Reverse Polarity Protection: Yes</li><li>Status Indicator (System Supply): LED green</li><li>Diagnostic Indicator: LED red</li><li>Connection Sensor Supply Voltage: M12 Power, 5-poles, L-coded</li><li>Current Carrying Capacity of Connector: max. 16 A</li><li>Sensor Supply Voltage (Nominal): 24 V DC (SELV/PELV)</li><li>Sensor Supply Voltage (Range): 18 V DC to 30 V DC</li><li>Reverse Polarity Protection: Yes</li><li>Status Indicator (Sensor Supply): LED green</li><li>Diagnostic Indicator: LED red</li><li>Connection Actuator Supply Voltage: via Module Supply Connection</li><li>Current Carrying Capacity of Connector: max. 16 A</li><li>Actuator Supply Voltage (Nominal): 24 V DC (SELV/PELV)</li><li>Actuator Supply Voltage (Range): 18 V DC to 30 V DC</li><li>Reverse Polarity Protection: Yes</li><li>Status Indicator (Actuator Supply): LED green</li><li>Diagnostic Indicator: LED red</li></ul>Digital Input Channels:<ul class="md-block-unordered-list-item"><li>Number of Digital Input Channels: max. 16, universal</li><li>Connection: M12, 5-poles, A-coded</li><li>Number of Ports: 8x, X1 to X8</li><li>Channel Type: Type 3 acc. to IEC 61131-2</li><li>Sensor Current Supply: max. 500 mA per port</li><li>Input Wiring: 2-, 3-, 4-wire</li><li>Nominal Voltage: 24 V DC via US (module power supply)</li><li>Nominal Current: typ. 5 mA</li><li>Sensor Type: PNP</li><li>Input Voltage Range &quot;0&quot; signal: -3 V DC …+5 V DC</li><li>Input Voltage Range &quot;1&quot; signal: 11 V DC … 30 V DC</li><li>Input Filter Time: 3 ms, fixed</li><li>Protective Circuit: Electronically: Overload protection, short-circuit protection</li><li>Status Indicator (Inputs): LED white or yellow per channel</li><li>Diagnostic Indicator: LED red per port</li></ul>Digital Output Channels:<ul class="md-block-unordered-list-item"><li>Number of Digital Output Channels: max. 16, universal</li><li>Connection: M12, 5-poles, A-coded</li><li>Number of Ports: 8x, X1 to X8</li><li>Output Current per Channel: max. 2 A</li><li>Channel Type: p-switching</li><li>Output Wiring: 2-wire</li><li>Nominal Voltage: 24 V DC via UL (actuator power supply)</li><li>Output Current per Module: max. 9 A</li><li>Galvanically Isolated: No</li><li>Protective Circuit: Electronically: Overload protection, short-circuit protection</li><li>Overload Behavior: Auto off and on switching / Manual restart</li><li>Status Indicator (Outputs): LED white or yellow per channel</li><li>Diagnostic Indicator: LED red per channel</li></ul>Electrical Isolation:<ul class="md-block-unordered-list-item"><li>US (System Supply Voltage) / FE: 500 V DC</li><li>UL / FE: 500 V DC</li><li>Bus connection / FE: 2000 V DC</li></ul>EMC Conformance:<ul class="md-block-unordered-list-item"><li>EMC Directive: 2014/30/EU</li><li>EN 61000-4-2 Electrostatic Discharge (ESD): Criterion B; 4 kV contact discharge, 8 kV air discharge</li><li>EN 61000-4-3 Electromagnetic Field: Criterion A; Field intensity: 10 V/m</li><li>EN 61000-4-4 Fast Transients (Burst): Criterion B, 2 kV</li><li>EN 61000-4-5 Surge Voltage: Criterion B; DC supply lines: ±0.5 kV/±0.5 kV (symmetrical/asymmetrical); For I/O ports with cables ≤ 30m</li><li>EN 61000-4-6 Conducted immunity: Criterion A; Test voltage 10 V</li><li>EN 55022 Radio Interference Properties: Class A</li></ul>Safety &amp; Environmental Compliance:<ul class="md-block-unordered-list-item"><li>CE: Yes</li><li>RoHS Compliant: Yes</li><li>China RoHS-Compliant: Yes</li></ul>Approvals:<ul class="md-block-unordered-list-item"><li>UL: cULus Listed, UL 61010-1</li><li>UL-File: E230848</li><li>CSA: Yes, via UL</li><li>PNO: Yes</li></ul>Notes:<ul class="md-block-unordered-list-item"><li>Protection Degree / IP Rating Note: ** only if mounted and locked in combination with Hirschmann / Lumberg Automation connector.</li><li>System Power Supply Connection Note: *do not connect / disconnect under voltage!</li></ul>

<h3>Lumberg Automation 934878007 0980 ESL 300-121 LioN-P, Profinet I/O Device, 16DIO (8x M12), M12 L-coded Power Supply, Metal, 60 Mm&nbsp;</h3>
<ul>
<li>Product Family: I/O Systems: Active - Standalone</li>
<li>Product Sub Family: LioN-P</li>
<li>Item Description: 0980 ESL 300-121</li>
<li>Device Type: I/O Module</li>
<li>Protocol: PROFINET</li>
<li>I/O Function: 16DIO</li>
<li>Bus Connection: M12, 4-poles, D-coded</li>
<li>Power Connection (System Supply): M12 Power, 5-poles, L-coded</li>
<li>I/O Connection: M12, 5-poles, A-coded</li>
<li>I/O Type: Digital In-/Output (Universal)</li>
</ul>
General Data:
<ul>
<li>Housing Material: Metal, Zinc Die-cast</li>
<li>Housing Plating: Nickel, matt</li>
<li>Housing Color: Grey Metallic</li>
<li>Protection Degree / IP Rating: IP65, IP67, IP69K</li>
<li>Potted: Yes</li>
<li>Dimensions (W x H x D): 60 mm x 31 mm x 200 mm</li>
<li>Weight: 500 g</li>
<li>Ambient Temperature (Operation): -20 °C to 70 °C</li>
<li>Ambient Temperature (Storage/Transport): -25 °C to 85 °C</li>
<li>Permissible Humidity (Operation): 5 % ... 95 % (For UL applications max. 80 %)</li>
<li>Permissible Humidity (Storage/Transport): 5 % ... 95 % (For UL applications max. 80 %)</li>
<li>Air Pressure (Operation): 80 kPa … 106 kPa (up to 2000 m above sea level)</li>
<li>Air Pressure (Storage/Transport): 80 kPa … 106 kPa (up to 2000 m above sea level)</li>
<li>Flammability Class: UL 94 (IEC 61010)</li>
<li>Protection Class: III, IEC 61140, EN 61140, VDE 0140-1</li>
<li>Pollution Degree: 3 acc. to EN 60664-1, VDE 0110-1</li>
<li>Vibration Resistance: 15 g / 5 -500 Hz</li>
<li>Shock Resistance: 50 g / 11ms</li>
<li>Mean Time To Failure (MTTF): 429 years, acc. to Telcordia SR-332 (2011) 20°C</li>
<li>Contact Base Material: M12, D-coded, CuSn, Gold-plated | M12 Power, L-coded, CuNi, Gold-plated</li>
<li>Contact Bearer Material: PA</li>
<li>O-Ring Material: FKM</li>
<li>Mounting: 2 hole screw mounting. Use standard M4 x 25 / 30 screws with toothed lock washer (as per DIN 125) and self-locking nuts.</li>
<li>Fastening Torque (Fixing Screw): M4: 1 Nm</li>
<li>Fastening Torque (Ground Connection (FE)): M4: 1 Nm</li>
<li>Fastening Torque (Bus Connection): M12: 0.5 Nm</li>
<li>Fastening Torque (Power Connection): M12: 0.5 Nm</li>
<li>Fastening Torque (I/O Connection): M12: 0.5 Nm</li>
<li>Included in Delivery: Attachable Labels: 15x, Sealing Caps: 5x M12</li>
</ul>
PROFINET:
<ul>
<li>Protocol: PROFINET</li>
<li>Connection: M12 LAN, 4-poles, D-coded</li>
<li>Number of Connections: 2</li>
<li>Netload Class: III</li>
<li>Specification: V2.3X</li>
<li>Conformance Class: C</li>
<li>Performance Class: RT (switch supports IRT)</li>
<li>Transmission Rate: Fast Ethernet (10/100 Mbit/s), Full Duplex</li>
<li>Transmission Method: 100 BASE-TX, with auto negotiation and auto crossing</li>
<li>Cycle Time / Update Rate: min. 1 ms</li>
<li>Addressing: DCP</li>
<li>Fast Startup (FSU): Supported, ≤ 1000 ms</li>
<li>Media Redundancy Protocol (MRP): Supported, MRP client</li>
<li>Shared Device: Not Supported</li>
<li>Topology Detection: LLDP, SNMP V1</li>
<li>Easy Device Replacement: Supported, based on LLDP</li>
<li>Supported Network Protocols (Other): ARP, HTTP, Ping, SNMP V1, TCP/IP</li>
</ul>
Power Supply:
<ul>
<li>Connection Module Supply Voltage: M12 Power, 5-poles, L-coded</li>
<li>Number of Connections: 2</li>
<li>Current Carrying Capacity of Connector: max. 16 A</li>
<li>Module Supply Voltage (Nominal): 24 V DC (SELV/PELV)</li>
<li>Module Supply Voltage (Range): 18 V DC to 30 V DC</li>
<li>Current Consumption (typ.): 120 mA (at 24 V DC)</li>
<li>Reverse Polarity Protection: Yes</li>
<li>Status Indicator (System Supply): LED green</li>
<li>Diagnostic Indicator: LED red</li>
<li>Connection Sensor Supply Voltage: M12 Power, 5-poles, L-coded</li>
<li>Current Carrying Capacity of Connector: max. 16 A</li>
<li>Sensor Supply Voltage (Nominal): 24 V DC (SELV/PELV)</li>
<li>Sensor Supply Voltage (Range): 18 V DC to 30 V DC</li>
<li>Reverse Polarity Protection: Yes</li>
<li>Status Indicator (Sensor Supply): LED green</li>
<li>Diagnostic Indicator: LED red</li>
<li>Connection Actuator Supply Voltage: via Module Supply Connection</li>
<li>Current Carrying Capacity of Connector: max. 16 A</li>
<li>Actuator Supply Voltage (Nominal): 24 V DC (SELV/PELV)</li>
<li>Actuator Supply Voltage (Range): 18 V DC to 30 V DC</li>
<li>Reverse Polarity Protection: Yes</li>
<li>Status Indicator (Actuator Supply): LED green</li>
<li>Diagnostic Indicator: LED red</li>
</ul>
Digital Input Channels:
<ul>
<li>Number of Digital Input Channels: max. 16, universal</li>
<li>Connection: M12, 5-poles, A-coded</li>
<li>Number of Ports: 8x, X1 to X8</li>
<li>Channel Type: Type 3 acc. to IEC 61131-2</li>
<li>Sensor Current Supply: max. 500 mA per port</li>
<li>Input Wiring: 2-, 3-, 4-wire</li>
<li>Nominal Voltage: 24 V DC via US (module power supply)</li>
<li>Nominal Current: typ. 5 mA</li>
<li>Sensor Type: PNP</li>
<li>Input Voltage Range "0" signal: -3 V DC …+5 V DC</li>
<li>Input Voltage Range "1" signal: 11 V DC … 30 V DC</li>
<li>Input Filter Time: 3 ms, fixed</li>
<li>Protective Circuit: Electronically: Overload protection, short-circuit protection</li>
<li>Status Indicator (Inputs): LED white or yellow per channel</li>
<li>Diagnostic Indicator: LED red per port</li>
</ul>
Digital Output Channels:
<ul>
<li>Number of Digital Output Channels: max. 16, universal</li>
<li>Connection: M12, 5-poles, A-coded</li>
<li>Number of Ports: 8x, X1 to X8</li>
<li>Output Current per Channel: max. 2 A</li>
<li>Channel Type: p-switching</li>
<li>Output Wiring: 2-wire</li>
<li>Nominal Voltage: 24 V DC via UL (actuator power supply)</li>
<li>Output Current per Module: max. 9 A</li>
<li>Galvanically Isolated: No</li>
<li>Protective Circuit: Electronically: Overload protection, short-circuit protection</li>
<li>Overload Behavior: Auto off and on switching / Manual restart</li>
<li>Status Indicator (Outputs): LED white or yellow per channel</li>
<li>Diagnostic Indicator: LED red per channel</li>
</ul>
Electrical Isolation:
<ul>
<li>US (System Supply Voltage) / FE: 500 V DC</li>
<li>UL / FE: 500 V DC</li>
<li>Bus connection / FE: 2000 V DC</li>
</ul>
EMC Conformance:
<ul>
<li>EMC Directive: 2014/30/EU</li>
<li>EN 61000-4-2 Electrostatic Discharge (ESD): Criterion B; 4 kV contact discharge, 8 kV air discharge</li>
<li>EN 61000-4-3 Electromagnetic Field: Criterion A; Field intensity: 10 V/m</li>
<li>EN 61000-4-4 Fast Transients (Burst): Criterion B, 2 kV</li>
<li>EN 61000-4-5 Surge Voltage: Criterion B; DC supply lines: ±0.5 kV/±0.5 kV (symmetrical/asymmetrical); For I/O ports with cables ≤ 30m</li>
<li>EN 61000-4-6 Conducted immunity: Criterion A; Test voltage 10 V</li>
<li>EN 55022 Radio Interference Properties: Class A</li>
</ul>
Safety &amp; Environmental Compliance:
<ul>
<li>CE: Yes</li>
<li>RoHS Compliant: Yes</li>
<li>China RoHS-Compliant: Yes</li>
</ul>
Approvals:
<ul>
<li>UL: cULus Listed, UL 61010-1</li>
<li>UL-File: E230848</li>
<li>CSA: Yes, via UL</li>
<li>PNO: Yes</li>
</ul>
Notes:
<ul>
<li>Protection Degree / IP Rating Note: ** only if mounted and locked in combination with Hirschmann / Lumberg Automation connector.</li>
<li>System Power Supply Connection Note: *do not connect / disconnect under voltage!</li>
</ul>

Hirschmann

Belden

Network Switches

Networking Products

Ethernet Cable

Fieldbus Repeaters

IT Cables

DIN Rail Power Supplies

Computer Supplies

Network Routers

 Data Diodes

Optical Bypass Relays

LHS ELECTRONICS

Lumberg Automation 934878007 0980 ESL 300-121 LioN-P, Profinet I/O Device, 16DIO (8x M12), M12 L-coded Power Supply, Metal, 60 Mm

lumberg automation 934878007 0980 esl 300-121 lion-p, profinet i/o device, 16dio (8x m12), m12 l-coded power supply, metal, 60mm perangkat profinet, catu daya berkode m12, logam, safety io modules automasi peranti bekalan kuasa berkod lumberg/隆堡 lion-p，profinet 设备，16dio m12)，m12 编码电源，金属，60 毫米 隆堡自动化

lumberg-automation-934878007-0980-esl-300-121-lion-p-profinet-i-o-device-16dio-8x-m12-m12-l-coded-power-supply-metal-60-mm

Safety Io Modules Lumberg Automation 934881007 0980 ESL 300-111 LioN-P, Profinet I/O Device, 16DIO (8x M12), 7/8" Power Supply, Metal, 60 Mm 

Power Connection (System Supply): 7/8" Power, 5-poles

Protection Degree / IP Rating: IP65, IP67

Dimensions (W x H x D): 60 mm x 26 mm x 206 mm

Mean Time To Failure (MTTF): 429 years. acc. to Telcordia SR-332 (2011) 20°C

Contact Base Material: M12, D-coded, CuSn, Gold-plated | 7/8" CuZn, Gold-plated

<h3 class="md-block-header-three">Safety Io Modules Lumberg Automation 934881007 0980 ESL 300-111 LioN-P, Profinet I/O Device, 16DIO (8x M12), 7/8&quot; Power Supply, Metal, 60 Mm </h3><ul class="md-block-unordered-list-item"><li>Product Family: I/O Systems: Active - Standalone</li><li>Product Sub Family: LioN-P</li><li>Item Description: 0980 ESL 300-111</li><li>Device Type: I/O Module</li><li>Protocol: PROFINET</li><li>I/O Function: 16DIO</li><li>Bus Connection: M12, 4-poles, D-coded</li><li>Power Connection (System Supply): 7/8&quot; Power, 5-poles</li><li>I/O Connection: M12, 5-poles, A-coded</li><li>I/O Type: Digital In-/Output (Universal)</li></ul>General Data:<ul class="md-block-unordered-list-item"><li>Housing Material: Metal, Zinc Die-cast</li><li>Housing Plating: Nickel, matt</li><li>Housing Color: Grey Metallic</li><li>Protection Degree / IP Rating: IP65, IP67</li><li>Potted: Yes</li><li>Dimensions (W x H x D): 60 mm x 26 mm x 206 mm</li><li>Weight: 520 g</li><li>Ambient Temperature (Operation): -20 °C to 70 °C</li><li>Ambient Temperature (Storage/Transport): -25 °C to 85 °C</li><li>Permissible Humidity (Operation): 5 % ... 95 % (For UL applications max. 80 %)</li><li>Permissible Humidity (Storage/Transport): 5 % ... 95 % (For UL applications max. 80 %)</li><li>Air Pressure (Operation): 80 kPa … 106 kPa (up to 2000 m above sea level)</li><li>Air Pressure (Storage/Transport): 80 kPa … 106 kPa (up to 2000 m above sea level)</li><li>Flammability Class: UL 94 (IEC 61010)</li><li>Protection Class: III, IEC 61140, EN 61140, VDE 0140-1</li><li>Pollution Degree: 3 acc. to EN 60664-1, VDE 0110-1</li><li>Vibration Resistance: 15 g / 5 -500 Hz</li><li>Shock Resistance: 50 g / 11ms</li><li>Mean Time To Failure (MTTF): 429 years. acc. to Telcordia SR-332 (2011) 20°C</li><li>Contact Base Material: M12, D-coded, CuSn, Gold-plated | 7/8&quot; CuZn, Gold-plated</li><li>Contact Bearer Material: PA / TPU</li><li>O-Ring Material: FKM</li><li>Mounting: 2 hole screw mounting. Use standard M4 x 25 / 30 screws with toothed lock washer (as per DIN 125) and self-locking nuts.</li><li>Fastening Torque (Fixing Screw): M4: 1 Nm</li><li>Fastening Torque (Ground Connection (FE)): M4: 1 Nm</li><li>Fastening Torque (Bus Connection): M12: 0.5 Nm</li><li>Fastening Torque (Power Connection): 7/8&quot;: 1.5 Nm</li><li>Fastening Torque (I/O Connection): M12: 0.5 Nm</li><li>Included in Delivery: Attachable Labels: 15x, Sealing Caps: 5x M12</li></ul>PROFINET:<ul class="md-block-unordered-list-item"><li>Protocol: PROFINET</li><li>Connection: M12 LAN, 4-poles, D-coded</li><li>Number of Connections: 2</li><li>Netload Class: III</li><li>Specification: V2.3X</li><li>Conformance Class: C</li><li>Performance Class: RT (switch supports IRT)</li><li>Transmission Rate: Fast Ethernet (10/100 Mbit/s), Full Duplex</li><li>Transmission Method: 100 BASE-TX, with auto negotiation and auto crossing</li><li>Cycle Time / Update Rate: min. 1 ms</li><li>Addressing: DCP</li><li>Fast Startup (FSU): Supported, ≤ 1000 ms</li><li>Media Redundancy Protocol (MRP): Supported, MRP client</li><li>Shared Device: Not Supported</li><li>Topology Detection: LLDP, SNMP V1</li><li>Easy Device Replacement: Supported, based on LLDP</li><li>Supported Network Protocols (Other): ARP, HTTP, Ping, SNMP V1, TCP/IP</li></ul>Power Supply:<ul class="md-block-unordered-list-item"><li>Connection Module Supply Voltage: 7/8&quot; Power, 5-poles</li><li>Number of Connections: 2</li><li>Current Carrying Capacity of Connector: max. 9 A</li><li>Module Supply Voltage (Nominal): 24 V DC (SELV/PELV)</li><li>Module Supply Voltage (Range): 18 V DC to 30 V DC</li><li>Current Consumption (typ.): 120 mA (at 24 V DC)</li><li>Reverse Polarity Protection: Yes</li><li>Status Indicator (System Supply): LED green</li><li>Diagnostic Indicator: LED red</li><li>Connection Sensor Supply Voltage: M12 Power, 5-poles, L-coded</li><li>Current Carrying Capacity of Connector: max. 9 A</li><li>Sensor Supply Voltage (Nominal): 24 V DC (SELV/PELV)</li><li>Sensor Supply Voltage (Range): 18 V DC to 30 V DC</li><li>Reverse Polarity Protection: Yes</li><li>Status Indicator (Sensor Supply): LED green</li><li>Diagnostic Indicator: LED red</li><li>Connection Actuator Supply Voltage: via Module Supply Connection</li><li>Current Carrying Capacity of Connector: max. 9 A</li><li>Actuator Supply Voltage (Nominal): 24 V DC (SELV/PELV)</li><li>Actuator Supply Voltage (Range): 18 V DC to 30 V DC</li><li>Reverse Polarity Protection: Yes</li><li>Status Indicator (Actuator Supply): LED green</li><li>Diagnostic Indicator: LED red</li></ul>Digital Input Channels:<ul class="md-block-unordered-list-item"><li>Number of Digital Input Channels: max. 16, universal</li><li>Connection: M12, 5-poles, A-coded</li><li>Number of Ports: 8x, X1 to X8</li><li>Channel Type: Type 3 acc. to IEC 61131-2</li><li>Sensor Current Supply: max. 500 mA per port</li><li>Input Wiring: 2-, 3-, 4-wire</li><li>Nominal Voltage: 24 V DC via US (module power supply)</li><li>Nominal Current: typ. 5 mA</li><li>Sensor Type: PNP</li><li>Input Voltage Range &quot;0&quot; signal: -3 V DC …+5 V DC</li><li>Input Voltage Range &quot;1&quot; signal: 11 V DC … 30 V DC</li><li>Input Filter Time: 3 ms, fixed</li><li>Protective Circuit: Electronically: Overload protection, short-circuit protection</li><li>Status Indicator (Inputs): LED white or yellow per channel</li><li>Diagnostic Indicator: LED red per port</li></ul>Digital Output Channels:<ul class="md-block-unordered-list-item"><li>Number of Digital Output Channels: max. 16, universal</li><li>Connection: M12, 5-poles, A-coded</li><li>Number of Ports: 8x, X1 to X8</li><li>Output Current per Channel: max. 2 A</li><li>Channel Type: p-switching</li><li>Output Wiring: 2-wire</li><li>Nominal Voltage: 24 V DC via UL (actuator power supply)</li><li>Output Current per Module: max. 9 A</li><li>Galvanically Isolated: No</li><li>Protective Circuit: Electronically: Overload protection, short-circuit protection</li><li>Overload Behavior: Auto off and on switching / Manual restart</li><li>Status Indicator (Outputs): LED white or yellow per channel</li><li>Diagnostic Indicator: LED red per channel</li></ul>Electrical Isolation:<ul class="md-block-unordered-list-item"><li>US (System Supply Voltage) / FE: 500 V DC</li><li>UL / FE: 500 V DC</li><li>Bus connection / FE: 2000 V DC</li></ul>EMC Conformance:<ul class="md-block-unordered-list-item"><li>EMC Directive: 2014/30/EU</li><li>EN 61000-4-2 Electrostatic Discharge (ESD): Criterion B; 4 kV contact discharge, 8 kV air discharge</li><li>EN 61000-4-3 Electromagnetic Field: Criterion A; Field intensity: 10 V/m</li><li>EN 61000-4-4 Fast Transients (Burst): Criterion B, 2 kV</li><li>EN 61000-4-5 Surge Voltage: Criterion B; DC supply lines: ±0.5 kV/±0.5 kV (symmetrical/asymmetrical); For I/O ports with cables ≤ 30m</li><li>EN 61000-4-6 Conducted immunity: Criterion A; Test voltage 10 V</li><li>EN 55022 Radio Interference Properties: Class A</li></ul>Safety &amp; Environmental Compliance:<ul class="md-block-unordered-list-item"><li>CE: Yes</li><li>RoHS Compliant: Yes</li><li>China RoHS-Compliant: Yes</li></ul>Approvals:<ul class="md-block-unordered-list-item"><li>UL: cULus Listed, UL 61010-1</li><li>UL-File: E230848</li><li>CSA: Yes, via UL</li><li>PNO: Yes</li></ul>Notes:<ul class="md-block-unordered-list-item"><li>Protection Degree / IP Rating Note: ** only if mounted and locked in combination with Hirschmann / Lumberg Automation connector.</li><li>System Power Supply Connection Note: do not connect / disconnect under voltage!</li></ul>

<h3>Safety Io Modules Lumberg Automation 934881007 0980 ESL 300-111 LioN-P, Profinet I/O Device, 16DIO (8x M12), 7/8" Power Supply, Metal, 60 Mm&nbsp;</h3>
<ul>
<li>Product Family: I/O Systems: Active - Standalone</li>
<li>Product Sub Family: LioN-P</li>
<li>Item Description: 0980 ESL 300-111</li>
<li>Device Type: I/O Module</li>
<li>Protocol: PROFINET</li>
<li>I/O Function: 16DIO</li>
<li>Bus Connection: M12, 4-poles, D-coded</li>
<li>Power Connection (System Supply): 7/8" Power, 5-poles</li>
<li>I/O Connection: M12, 5-poles, A-coded</li>
<li>I/O Type: Digital In-/Output (Universal)</li>
</ul>
General Data:
<ul>
<li>Housing Material: Metal, Zinc Die-cast</li>
<li>Housing Plating: Nickel, matt</li>
<li>Housing Color: Grey Metallic</li>
<li>Protection Degree / IP Rating: IP65, IP67</li>
<li>Potted: Yes</li>
<li>Dimensions (W x H x D): 60 mm x 26 mm x 206 mm</li>
<li>Weight: 520 g</li>
<li>Ambient Temperature (Operation): -20 °C to 70 °C</li>
<li>Ambient Temperature (Storage/Transport): -25 °C to 85 °C</li>
<li>Permissible Humidity (Operation): 5 % ... 95 % (For UL applications max. 80 %)</li>
<li>Permissible Humidity (Storage/Transport): 5 % ... 95 % (For UL applications max. 80 %)</li>
<li>Air Pressure (Operation): 80 kPa … 106 kPa (up to 2000 m above sea level)</li>
<li>Air Pressure (Storage/Transport): 80 kPa … 106 kPa (up to 2000 m above sea level)</li>
<li>Flammability Class: UL 94 (IEC 61010)</li>
<li>Protection Class: III, IEC 61140, EN 61140, VDE 0140-1</li>
<li>Pollution Degree: 3 acc. to EN 60664-1, VDE 0110-1</li>
<li>Vibration Resistance: 15 g / 5 -500 Hz</li>
<li>Shock Resistance: 50 g / 11ms</li>
<li>Mean Time To Failure (MTTF): 429 years. acc. to Telcordia SR-332 (2011) 20°C</li>
<li>Contact Base Material: M12, D-coded, CuSn, Gold-plated | 7/8" CuZn, Gold-plated</li>
<li>Contact Bearer Material: PA / TPU</li>
<li>O-Ring Material: FKM</li>
<li>Mounting: 2 hole screw mounting. Use standard M4 x 25 / 30 screws with toothed lock washer (as per DIN 125) and self-locking nuts.</li>
<li>Fastening Torque (Fixing Screw): M4: 1 Nm</li>
<li>Fastening Torque (Ground Connection (FE)): M4: 1 Nm</li>
<li>Fastening Torque (Bus Connection): M12: 0.5 Nm</li>
<li>Fastening Torque (Power Connection): 7/8": 1.5 Nm</li>
<li>Fastening Torque (I/O Connection): M12: 0.5 Nm</li>
<li>Included in Delivery: Attachable Labels: 15x, Sealing Caps: 5x M12</li>
</ul>
PROFINET:
<ul>
<li>Protocol: PROFINET</li>
<li>Connection: M12 LAN, 4-poles, D-coded</li>
<li>Number of Connections: 2</li>
<li>Netload Class: III</li>
<li>Specification: V2.3X</li>
<li>Conformance Class: C</li>
<li>Performance Class: RT (switch supports IRT)</li>
<li>Transmission Rate: Fast Ethernet (10/100 Mbit/s), Full Duplex</li>
<li>Transmission Method: 100 BASE-TX, with auto negotiation and auto crossing</li>
<li>Cycle Time / Update Rate: min. 1 ms</li>
<li>Addressing: DCP</li>
<li>Fast Startup (FSU): Supported, ≤ 1000 ms</li>
<li>Media Redundancy Protocol (MRP): Supported, MRP client</li>
<li>Shared Device: Not Supported</li>
<li>Topology Detection: LLDP, SNMP V1</li>
<li>Easy Device Replacement: Supported, based on LLDP</li>
<li>Supported Network Protocols (Other): ARP, HTTP, Ping, SNMP V1, TCP/IP</li>
</ul>
Power Supply:
<ul>
<li>Connection Module Supply Voltage: 7/8" Power, 5-poles</li>
<li>Number of Connections: 2</li>
<li>Current Carrying Capacity of Connector: max. 9 A</li>
<li>Module Supply Voltage (Nominal): 24 V DC (SELV/PELV)</li>
<li>Module Supply Voltage (Range): 18 V DC to 30 V DC</li>
<li>Current Consumption (typ.): 120 mA (at 24 V DC)</li>
<li>Reverse Polarity Protection: Yes</li>
<li>Status Indicator (System Supply): LED green</li>
<li>Diagnostic Indicator: LED red</li>
<li>Connection Sensor Supply Voltage: M12 Power, 5-poles, L-coded</li>
<li>Current Carrying Capacity of Connector: max. 9 A</li>
<li>Sensor Supply Voltage (Nominal): 24 V DC (SELV/PELV)</li>
<li>Sensor Supply Voltage (Range): 18 V DC to 30 V DC</li>
<li>Reverse Polarity Protection: Yes</li>
<li>Status Indicator (Sensor Supply): LED green</li>
<li>Diagnostic Indicator: LED red</li>
<li>Connection Actuator Supply Voltage: via Module Supply Connection</li>
<li>Current Carrying Capacity of Connector: max. 9 A</li>
<li>Actuator Supply Voltage (Nominal): 24 V DC (SELV/PELV)</li>
<li>Actuator Supply Voltage (Range): 18 V DC to 30 V DC</li>
<li>Reverse Polarity Protection: Yes</li>
<li>Status Indicator (Actuator Supply): LED green</li>
<li>Diagnostic Indicator: LED red</li>
</ul>
Digital Input Channels:
<ul>
<li>Number of Digital Input Channels: max. 16, universal</li>
<li>Connection: M12, 5-poles, A-coded</li>
<li>Number of Ports: 8x, X1 to X8</li>
<li>Channel Type: Type 3 acc. to IEC 61131-2</li>
<li>Sensor Current Supply: max. 500 mA per port</li>
<li>Input Wiring: 2-, 3-, 4-wire</li>
<li>Nominal Voltage: 24 V DC via US (module power supply)</li>
<li>Nominal Current: typ. 5 mA</li>
<li>Sensor Type: PNP</li>
<li>Input Voltage Range "0" signal: -3 V DC …+5 V DC</li>
<li>Input Voltage Range "1" signal: 11 V DC … 30 V DC</li>
<li>Input Filter Time: 3 ms, fixed</li>
<li>Protective Circuit: Electronically: Overload protection, short-circuit protection</li>
<li>Status Indicator (Inputs): LED white or yellow per channel</li>
<li>Diagnostic Indicator: LED red per port</li>
</ul>
Digital Output Channels:
<ul>
<li>Number of Digital Output Channels: max. 16, universal</li>
<li>Connection: M12, 5-poles, A-coded</li>
<li>Number of Ports: 8x, X1 to X8</li>
<li>Output Current per Channel: max. 2 A</li>
<li>Channel Type: p-switching</li>
<li>Output Wiring: 2-wire</li>
<li>Nominal Voltage: 24 V DC via UL (actuator power supply)</li>
<li>Output Current per Module: max. 9 A</li>
<li>Galvanically Isolated: No</li>
<li>Protective Circuit: Electronically: Overload protection, short-circuit protection</li>
<li>Overload Behavior: Auto off and on switching / Manual restart</li>
<li>Status Indicator (Outputs): LED white or yellow per channel</li>
<li>Diagnostic Indicator: LED red per channel</li>
</ul>
Electrical Isolation:
<ul>
<li>US (System Supply Voltage) / FE: 500 V DC</li>
<li>UL / FE: 500 V DC</li>
<li>Bus connection / FE: 2000 V DC</li>
</ul>
EMC Conformance:
<ul>
<li>EMC Directive: 2014/30/EU</li>
<li>EN 61000-4-2 Electrostatic Discharge (ESD): Criterion B; 4 kV contact discharge, 8 kV air discharge</li>
<li>EN 61000-4-3 Electromagnetic Field: Criterion A; Field intensity: 10 V/m</li>
<li>EN 61000-4-4 Fast Transients (Burst): Criterion B, 2 kV</li>
<li>EN 61000-4-5 Surge Voltage: Criterion B; DC supply lines: ±0.5 kV/±0.5 kV (symmetrical/asymmetrical); For I/O ports with cables ≤ 30m</li>
<li>EN 61000-4-6 Conducted immunity: Criterion A; Test voltage 10 V</li>
<li>EN 55022 Radio Interference Properties: Class A</li>
</ul>
Safety &amp; Environmental Compliance:
<ul>
<li>CE: Yes</li>
<li>RoHS Compliant: Yes</li>
<li>China RoHS-Compliant: Yes</li>
</ul>
Approvals:
<ul>
<li>UL: cULus Listed, UL 61010-1</li>
<li>UL-File: E230848</li>
<li>CSA: Yes, via UL</li>
<li>PNO: Yes</li>
</ul>
Notes:
<ul>
<li>Protection Degree / IP Rating Note: ** only if mounted and locked in combination with Hirschmann / Lumberg Automation connector.</li>
<li>System Power Supply Connection Note: do not connect / disconnect under voltage!</li>
</ul>

Lumberg Automation 934881007 0980 ESL 300-111 LioN-P, Profinet I/O Device, 16DIO (8x M12), 7/8" Power Supply, Metal, 60 Mm

lumberg automation 934881007 0980 esl 300-111 lion-p, profinet i/o device, 16dio (8x m12), 7/8" power supply, metal, 60mm perangkat profinet, catu daya 7/8", logam, safety io modules automasi peranti bekalan kuasa lumberg/隆堡 lion-p，profinet 设备，16dio（8x m12），7/8" 电源，金属，60 毫米 隆堡自动化