BOSSIL

HANSMAN

Hunter

Iwata

LOCTITE

Permatex

SELLEYS

Adhesive

adhesive

Adhesive Glue

adhesive-glue

Fasteners

fasteners

Eye Bolts

eye-bolts

Mechanical Parts

mechanical-parts

O Ring

o-ring

Painting Materials

painting-materials

Painting Tools

painting-tools

Machinery Lubricants

machinery-lubricants

Sealants

sealants

Groove processing for drilling exhaust holes

The screw hole can be masked around the washer

<h3 class="md-block-header-three">Features:</h3><ul class="md-block-unordered-list-item"><li>Ribbing is easy to remove (Inside)</li><li>Groove processing for drilling exhaust holes</li><li>Stepped for easy removal</li><li>The screw hole can be masked around the washer</li></ul><h3 class="md-block-header-three">Specification:</h3><ul class="md-block-unordered-list-item"><li>Brand: Iwata</li><li>Product Type: Masking Cap C</li><li>Material: Silicone</li><li>Heat Resistant Temperature: 220°C</li><li>Hardness (Shore A): Approx. 55</li><li>Colour: Green</li><li>Corresponding Screw Size: M16</li><li>L: 50 mm</li><li>Ød: 15.2 mm</li><li>ØB: 30 mm</li></ul><h3 class="md-block-header-three">Available MOQ:</h3><ul class="md-block-unordered-list-item"><li>SKU: HLCS16-P - 1 Piece/Pack</li><li>SKU: HLCS16-B - 50 Piece/Box</li></ul>

<h3>Features:</h3>
<ul>
<li>Ribbing is easy to remove (Inside)</li>
<li>Groove processing for drilling exhaust holes</li>
<li>Stepped for easy removal</li>
<li>The screw hole can be masked around the washer</li>
</ul>
<h3>Specification:</h3>
<ul>
<li>Brand: Iwata</li>
<li>Product Type: Masking Cap C</li>
<li>Material: Silicone</li>
<li>Heat Resistant Temperature: 220°C</li>
<li>Hardness (Shore A): Approx. 55</li>
<li>Colour: Green</li>
<li>Corresponding Screw Size: M16</li>
<li>L: 50 mm</li>
<li>Ød: 15.2 mm</li>
<li>ØB: 30 mm</li>
</ul>
<h3>Available MOQ:</h3>
<ul>
<li>SKU: HLCS16-P - 1 Piece/Pack</li>
<li>SKU: HLCS16-B - 50 Piece/Box</li>
</ul>

IT Accessories

Hooks & Eyes

Machinery Accessories

Leland Tan

buyerIntroduction

Iwata Silicone Masking Cap C 50mm X 30mm

iwata silicone masking cap 50mm 30mm painting tools alat melukis penutup silikon mengecat iwata/岩田 矽胶遮蔽帽c 涂装工具 岩田

iwata-silicone-masking-cap-c-50mm-x-30mm

HLCS16-P - 1 Piece/Pack

HLCS16-B - 50 Piece/Box

Silicone O-Rings are sometimes referred to VMQ O-Rings.

Silicone elastomers are an excellent material due to its outstanding resistance to extreme range of temperature ranging from (-59`C to 232`C) and it has good retention of compression and flexibility. 

In addition Silicone perform excellent resistance to ozone, oxygen, moisture and water swell. Last of all, Silicone has and produces very low odour and taste elastomer therefore making it the right material to be used in food and beverage, and medical industry.

Overview on Application Rating for Material Silicone 

Heat Ozone & Aging Resistance - Excellent

Other than the size and material type, there is one final option that you need to take in consideration. And that is the Durometer. Durometer are being classified as an industry standard to measure the elastomer hardness. Durometer is measured and listed in accordance with “Shore A” scale. Typical standard hardness for the elastomer are 70 shore, 75 shore and 90 shore to choose from depending on the material that you are using. The higher the value of the shore indicates that the material you are using is harder.Durometer is also generally stated and accepted with a “+/- 5” tolerance. Silicone O-Rings the standard nominal durometer is 70 Shore.

O-Rings and rubber seals are generally used for:

· Applications that require resistance to OIL

· Applications that are required to work in low temperatures (-0°C)

· High performance Fuel systems that requires strictly no leakage

O-rings need to be installed properly for a perfect fit and sealing. It is important that you install the O-ring in a prescribed manner to ensure your application continues to function properly. You will also ensure you increase the life of the application.

The process of installing an O-ring into a male gland is an intricate affair that should be carefully undertaken. Glide it along the shaft so as it reaches the gland. At that point, it should easily snap into place. Simple as it might sound, a number of steps will ensure that the O-ring doesn’t get damaged.

If you want to install an O-ring correctly and within a short time, here are steps to follow:

· Covering and lubricating the threading of the shaft

The threading of the shaft has the potential of tearing the rubber seal. Cover the threads using a masking tape and then lubricate them to allow for easy passage of the O-ring. The aim is to have the O-ring slide through without getting torn.

That’s a tip that will save you the stress of a torn O-ring. In fact, running the O-ring over jagged or sharp objects could get it torn. You may not be able to notice some of these tears. That’s why you should ensure you prevent them from occurring in the first place.

You will have to stretch the O-ring over the shaft. Ensure you do it evenly. Pulling from one side is a no-no. If anything, you should stretch the O-ring as little as possible. You will not just get a tighter grip but added security too.

Instead of rolling the O-ring down the shaft, slide it. If you spiral wind or roll an O-ring, it cannot be properly installed. It will also not function optimally and can even end up being damaged. If you have a lubricant, apply it on the O-ring and you will keep it rolling.

Place the female component in a manner that allows its radius to go around the corner. This should be done when you are finalizing the installation process. Ensure the lead of this component is inside the chamfer. This is how you will be able to guarantee the safety of the O-ring.

For O-rings to perform optimally, they have to be properly installed. It doesn’t just provide secure sealing but also increases the service life of the component together with the application. Don’t compromise on this process.

ORING JIS B2401 P30 ID 29.70 x CS 3.50Material : Silicone 70 Shore Silicone O-Rings are sometimes referred to VMQ O-Rings.Silicone elastomers are an excellent material due to its outstanding resistance to extreme range of temperature ranging from (-59&#x60;C to 232&#x60;C) and it has good retention of compression and flexibility. In addition Silicone perform excellent resistance to ozone, oxygen, moisture and water swell. Last of all, Silicone has and produces very low odour and taste elastomer therefore making it the right material to be used in food and beverage, and medical industry.Temperature Range (Dry Heat)Low: -75&#x60;F / -59&#x60;C High: 450&#x60;F / 232&#x60;COverview on Application Rating for Material Silicone Properties (Rating)Oils &amp; Grease - FairTear Strength – PoorFuel Resistance - PoorHeat Ozone &amp; Aging Resistance - ExcellentWater Swell Resistance - ExcellentAbrasion Resistance - PoorOther than the size and material type, there is one final option that you need to take in consideration. And that is the Durometer. Durometer are being classified as an industry standard to measure the elastomer hardness. Durometer is measured and listed in accordance with “Shore A” scale. Typical standard hardness for the elastomer are 70 shore, 75 shore and 90 shore to choose from depending on the material that you are using. The higher the value of the shore indicates that the material you are using is harder.Durometer is also generally stated and accepted with a “+/- 5” tolerance. Silicone O-Rings the standard nominal durometer is 70 Shore.Primary UsageO-Rings and rubber seals are generally used for:· Applications that require resistance to OIL· Applications that are required to work in low temperatures (-0°C)· High performance Fuel systems that requires strictly no leakage<ul class="md-block-unordered-list-item"><li>Aircrafts</li><li>Marine Ships</li><li>F1 Cars</li></ul>· General Industrial Use Tips for installation of an O-ringO-rings need to be installed properly for a perfect fit and sealing. It is important that you install the O-ring in a prescribed manner to ensure your application continues to function properly. You will also ensure you increase the life of the application.So how do you install an O-ring?The process of installing an O-ring into a male gland is an intricate affair that should be carefully undertaken. Glide it along the shaft so as it reaches the gland. At that point, it should easily snap into place. Simple as it might sound, a number of steps will ensure that the O-ring doesn’t get damaged.If you want to install an O-ring correctly and within a short time, here are steps to follow:· Covering and lubricating the threading of the shaftThe threading of the shaft has the potential of tearing the rubber seal. Cover the threads using a masking tape and then lubricate them to allow for easy passage of the O-ring. The aim is to have the O-ring slide through without getting torn.· Don’t force it over sharp cornersThat’s a tip that will save you the stress of a torn O-ring. In fact, running the O-ring over jagged or sharp objects could get it torn. You may not be able to notice some of these tears. That’s why you should ensure you prevent them from occurring in the first place.· Even stretchingYou will have to stretch the O-ring over the shaft. Ensure you do it evenly. Pulling from one side is a no-no. If anything, you should stretch the O-ring as little as possible. You will not just get a tighter grip but added security too.· Don’t roll it down the shaftInstead of rolling the O-ring down the shaft, slide it. If you spiral wind or roll an O-ring, it cannot be properly installed. It will also not function optimally and can even end up being damaged. If you have a lubricant, apply it on the O-ring and you will keep it rolling.· Finishing it offPlace the female component in a manner that allows its radius to go around the corner. This should be done when you are finalizing the installation process. Ensure the lead of this component is inside the chamfer. This is how you will be able to guarantee the safety of the O-ring.For O-rings to perform optimally, they have to be properly installed. It doesn’t just provide secure sealing but also increases the service life of the component together with the application. Don’t compromise on this process.Installation Guide<figure class="md-block-image"><img src="https://storage.googleapis.com/eezee-product-images/FU8mYCBCAUFLSwYdyWL6Gv.png" alt="" /><figcaption className="md-block-image-caption"></figcaption></figure>

ORING JIS B2401 P30&nbsp;
ID 29.70 x CS 3.50
Material : Silicone 70 Shore&nbsp;&nbsp;&nbsp;
&nbsp;&nbsp;&nbsp;&nbsp;
Silicone O-Rings are sometimes referred to VMQ O-Rings.
Silicone elastomers are an excellent material due to its outstanding resistance to extreme range of temperature ranging from (-59`C to 232`C) and it has good retention of compression and flexibility.&nbsp;
In addition Silicone perform excellent resistance to ozone, oxygen, moisture and water swell. Last of all, Silicone has and produces very low odour and taste elastomer therefore making it the right material to be used in food and beverage, and medical industry.
<ins>Temperature Range (Dry Heat)</ins>
Low: -75`F / -59`C High: 450`F / 232`C
<ins>Overview on Application Rating for Material Silicone </ins>
Properties (Rating)
Oils &amp; Grease - Fair
Tear Strength – Poor
Fuel Resistance - Poor
Heat Ozone &amp; Aging Resistance - Excellent
Water Swell Resistance - Excellent
Abrasion Resistance - Poor
Other than the size and material type, there is one final option that you need to take in consideration. And that is the Durometer. Durometer are being classified as an industry standard to measure the elastomer hardness. Durometer is measured and listed in accordance with “Shore A” scale. Typical standard hardness for the elastomer are 70 shore, 75 shore and 90 shore to choose from depending on the material that you are using. The higher the value of the shore indicates that the material you are using is harder.Durometer is also generally stated and accepted with a “+/- 5” tolerance. Silicone O-Rings the standard nominal durometer is 70 Shore.
<ins>Primary Usage</ins>
O-Rings and rubber seals are generally used for:
· Applications that require resistance to OIL
· Applications that are required to work in low temperatures (-0°C)
· High performance Fuel systems that requires strictly no leakage
<ul>
<li>Aircrafts</li>
<li>Marine Ships</li>
<li>F1 Cars</li>
</ul>
· General Industrial Use&nbsp;
<ins>Tips for installation of an O-ring</ins>
O-rings need to be installed properly for a perfect fit and sealing. It is important that you install the O-ring in a prescribed manner to ensure your application continues to function properly. You will also ensure you increase the life of the application.
<ins>So how do you install an O-ring?</ins>
The process of installing an O-ring into a male gland is an intricate affair that should be carefully undertaken. Glide it along the shaft so as it reaches the gland. At that point, it should easily snap into place. Simple as it might sound, a number of steps will ensure that the O-ring doesn’t get damaged.
If you want to install an O-ring correctly and within a short time, here are steps to follow:
· Covering and lubricating the threading of the shaft
The threading of the shaft has the potential of tearing the rubber seal. Cover the threads using a masking tape and then lubricate them to allow for easy passage of the O-ring. The aim is to have the O-ring slide through without getting torn.
· Don’t force it over sharp corners
That’s a tip that will save you the stress of a torn O-ring. In fact, running the O-ring over jagged or sharp objects could get it torn. You may not be able to notice some of these tears. That’s why you should ensure you prevent them from occurring in the first place.
· Even stretching
You will have to stretch the O-ring over the shaft. Ensure you do it evenly. Pulling from one side is a no-no. If anything, you should stretch the O-ring as little as possible. You will not just get a tighter grip but added security too.
· Don’t roll it down the shaft
Instead of rolling the O-ring down the shaft, slide it. If you spiral wind or roll an O-ring, it cannot be properly installed. It will also not function optimally and can even end up being damaged. If you have a lubricant, apply it on the O-ring and you will keep it rolling.
· Finishing it off
Place the female component in a manner that allows its radius to go around the corner. This should be done when you are finalizing the installation process. Ensure the lead of this component is inside the chamfer. This is how you will be able to guarantee the safety of the O-ring.
For O-rings to perform optimally, they have to be properly installed. It doesn’t just provide secure sealing but also increases the service life of the component together with the application. Don’t compromise on this process.
<ins>Installation Guide</ins>

 <div class="img-ctnr">
 <amp-img 
 on="tap:bcf6o"
 tabindex="0"
 role="button"
 class="contain"
 layout="fill"
 src="https://storage.googleapis.com/eezee-product-images/FU8mYCBCAUFLSwYdyWL6Gv.png"
 ></amp-img>
 </div>
 
 <amp-image-lightbox 
 id="bcf6o" 
 layout="nodisplay"></amp-image-lightbox>

John

Others

Optibelt

Gates

SAMTECH

VITON

V Rings

Rubber Seals

Oil Seals

Shaft Couplings

Plumbing Tools & Equipment

Ball Bearings

Hydraulic Seals

Wall Plugs, Anchors, Fixings & Kits

Vee-Belts

ORING JIS B2401 P30 ID 29.70 x CS 3.50 Silicone 70 Shore

oring jis b2401 p30 id 29.70 cs 3.50 silicone 70 shore silikon ring o-ring oem gelang oem/oem代工 3.50硅胶70肖氏 o型圈 oem代工

oring-jis-b2401-p30-id-29-70-x-cs-3-50-silicone-70-shore

The entrance of the screw hole can be masked and it is also ideal for electrodeposition coating

Can be hung by combining with an eyebolt sold separately and secures electricity

Corresponding Eye Bolt Part Number: EB 06

<h3 class="md-block-header-three">Features:</h3><ul class="md-block-unordered-list-item"><li>Masking parts for screw holes only</li><li>The entrance of the screw hole can be masked and it is also ideal for electrodeposition coating</li><li>Can be hung by combining with an eyebolt sold separately and secures electricity</li></ul><h3 class="md-block-header-three">Specification:</h3><ul class="md-block-unordered-list-item"><li>Brand: Iwata</li><li>Product Type: Q-Bolt</li><li>Material: Silicone</li><li>M: M20</li><li>M1: M6</li><li>W: 30 mm</li><li>L1: 7.5 mm</li><li>L2: 4.3 mm</li><li>L3: 6.5 mm</li><li>Colour: Green</li><li>Corresponding Eye Bolt Part Number: EB 06</li><li>Heat Resistant Temperature: 220°C</li><li>Hardness (Shore A): Approx. 55</li></ul><h3 class="md-block-header-three">Available MOQ:</h3><ul class="md-block-unordered-list-item"><li>SKU: HEAS20-P - 1 Piece/Pack</li><li>SKU: HEAS20-B - 50 Piece/Box</li></ul>

<h3>Features:</h3>
<ul>
<li>Masking parts for screw holes only</li>
<li>The entrance of the screw hole can be masked and it is also ideal for electrodeposition coating</li>
<li>Can be hung by combining with an eyebolt sold separately and secures electricity</li>
</ul>
<h3>Specification:</h3>
<ul>
<li>Brand: Iwata</li>
<li>Product Type: Q-Bolt</li>
<li>Material: Silicone</li>
<li>M: M20</li>
<li>M1: M6</li>
<li>W: 30 mm</li>
<li>L1: 7.5 mm</li>
<li>L2: 4.3 mm</li>
<li>L3: 6.5 mm</li>
<li>Colour: Green</li>
<li>Corresponding Eye Bolt Part Number: EB 06</li>
<li>Heat Resistant Temperature: 220°C</li>
<li>Hardness (Shore A): Approx. 55</li>
</ul>
<h3>Available MOQ:</h3>
<ul>
<li>SKU: HEAS20-P - 1 Piece/Pack</li>
<li>SKU: HEAS20-B - 50 Piece/Box</li>
</ul>

Iwata Silicone Q-bolt for M20 Screw 30mm

iwata silicone q-bolt m20 screw 30mm untuk eye bolts iwata/岩田 硅胶q螺栓用于m20螺丝30mm 岩田

iwata-silicone-q-bolt-for-m20-screw-30mm

HEAS20-P - 1 Piece/Pack

HEAS20-B - 50 Piece/Box

Dimensional tolerance conforms to ISO 3302-1 Class M4

<h3 class="md-block-header-three">Features:</h3><ul class="md-block-unordered-list-item"><li>Can also be used as a plug</li><li>Dimensional tolerance conforms to ISO 3302-1 Class M4</li></ul><h3 class="md-block-header-three">Specification:</h3><ul class="md-block-unordered-list-item"><li>Brand: Iwata</li><li>Product Type: Masking Cap A</li><li>Material: Silicone</li><li>Heat Resistant Temperature: 220°C</li><li>Hardness (Shore A): Approx. 55</li><li>Colour: Cream</li><li>d: 27 mm</li><li>D2: 30 mm</li><li>L: 50.8 mm</li></ul><h3 class="md-block-header-three">Available MOQ:</h3><ul class="md-block-unordered-list-item"><li>SKU: HLAS270-P - 1 Piece/Pack</li><li>SKU: HLAS270-B - 25 Piece/Box</li></ul>

<h3>Features:</h3>
<ul>
<li>Can also be used as a plug</li>
<li>Dimensional tolerance conforms to ISO 3302-1 Class M4</li>
</ul>
<h3>Specification:</h3>
<ul>
<li>Brand: Iwata</li>
<li>Product Type: Masking Cap A</li>
<li>Material: Silicone</li>
<li>Heat Resistant Temperature: 220°C</li>
<li>Hardness (Shore A): Approx. 55</li>
<li>Colour: Cream</li>
<li>d: 27 mm</li>
<li>D2: 30 mm</li>
<li>L: 50.8 mm</li>
</ul>
<h3>Available MOQ:</h3>
<ul>
<li>SKU: HLAS270-P - 1 Piece/Pack</li>
<li>SKU: HLAS270-B - 25 Piece/Box</li>
</ul>

Iwata Silicone Masking Cap a 50.8mm X 27mm

iwata silicone masking cap 50.8mm 27mm tutup silikon berukuran 50,8mm painting tools alat melukis mengecat iwata/岩田 矽胶遮蔽帽50.8mm 涂装工具 岩田

iwata-silicone-masking-cap-a-50-8mm-x-27mm

HLAS270-P - 1 Piece/Pack

HLAS270-B - 25 Piece/Box

Other than the size and material type, there is one final option that you need to take in consideration. And that is the Durometer. Durometer are being classified as an industry standard to measure the elastomer hardness. Durometer is measured and listed in accordance with “Shore A” scale. Typical standard hardness for the elastomer are 70 shore, 75 shore and 90 shore to choose from depending on the material that you are using. The higher the value of the shore indicates that the material you are using is harder. Durometer is also generally stated and accepted with a “+/- 5” tolerance. Silicone O-Rings the standard nominal durometer is 70 Shore.

ORING AS568 AS024ID 28.30 X CS 1.78Material : Silicone 70 Shore Additional InformationSilicone O-Rings are sometimes referred to VMQ O-Rings.Silicone elastomers are an excellent material due to its outstanding resistance to extreme range of temperature ranging from (-59&#x60;C to 232&#x60;C) and it has good retention of compression and flexibility. In addition Silicone perform excellent resistance to ozone, oxygen, moisture and water swell. Last of all, Silicone has and produces very low odour and taste elastomer therefore making it the right material to be used in food and beverage, and medical industry.Temperature Range (Dry Heat)Low: -75&#x60;F / -59&#x60;C High: 450&#x60;F / 232&#x60;COverview on Application Rating for Material Silicone Properties (Rating)Oils &amp; Grease - FairTear Strength – PoorFuel Resistance - PoorHeat Ozone &amp; Aging Resistance - ExcellentWater Swell Resistance - ExcellentAbrasion Resistance - PoorOther than the size and material type, there is one final option that you need to take in consideration. And that is the Durometer. Durometer are being classified as an industry standard to measure the elastomer hardness. Durometer is measured and listed in accordance with “Shore A” scale. Typical standard hardness for the elastomer are 70 shore, 75 shore and 90 shore to choose from depending on the material that you are using. The higher the value of the shore indicates that the material you are using is harder. Durometer is also generally stated and accepted with a “+/- 5” tolerance. Silicone O-Rings the standard nominal durometer is 70 Shore.Primary UsageO-Rings and rubber seals are generally used for:· Applications that require resistance to OIL· Applications that are required to work in low temperatures (-0°C)· High performance Fuel systems that requires strictly no leakage<ul class="md-block-unordered-list-item"><li>Aircrafts</li><li>Marine Ships</li><li>F1 Cars</li></ul>· General Industrial Use Tips for installation of an O-ringO-rings need to be installed properly for a perfect fit and sealing. It is important that you install the O-ring in a prescribed manner to ensure your application continues to function properly. You will also ensure you increase the life of the application.So how do you install an O-ring?The process of installing an O-ring into a male gland is an intricate affair that should be carefully undertaken. Glide it along the shaft so as it reaches the gland. At that point, it should easily snap into place. Simple as it might sound, a number of steps will ensure that the O-ring doesn’t get damaged.If you want to install an O-ring correctly and within a short time, here are steps to follow:· Covering and lubricating the threading of the shaftThe threading of the shaft has the potential of tearing the rubber seal. Cover the threads using a masking tape and then lubricate them to allow for easy passage of the O-ring. The aim is to have the O-ring slide through without getting torn.· Don’t force it over sharp cornersThat’s a tip that will save you the stress of a torn O-ring. In fact, running the O-ring over jagged or sharp objects could get it torn. You may not be able to notice some of these tears. That’s why you should ensure you prevent them from occurring in the first place.· Even stretchingYou will have to stretch the O-ring over the shaft. Ensure you do it evenly. Pulling from one side is a no-no. If anything, you should stretch the O-ring as little as possible. You will not just get a tighter grip but added security too.· Don’t roll it down the shaftInstead of rolling the O-ring down the shaft, slide it. If you spiral wind or roll an O-ring, it cannot be properly installed. It will also not function optimally and can even end up being damaged. If you have a lubricant, apply it on the O-ring and you will keep it rolling.· Finishing it offPlace the female component in a manner that allows its radius to go around the corner. This should be done when you are finalizing the installation process. Ensure the lead of this component is inside the chamfer. This is how you will be able to guarantee the safety of the O-ring.For O-rings to perform optimally, they have to be properly installed. It doesn’t just provide secure sealing but also increases the service life of the component together with the application. Don’t compromise on this process.Installation Guide<figure class="md-block-image"><img src="https://storage.googleapis.com/eezee-product-images/rp33Pm9v3AEvZ8f0~1uwlI.png" alt="" /><figcaption className="md-block-image-caption"></figcaption></figure>

ORING AS568 AS024
ID 28.30 X CS 1.78
Material : Silicone 70 Shore&nbsp;&nbsp;&nbsp;&nbsp;
&nbsp;&nbsp;
<ins>Additional Information</ins>
Silicone O-Rings are sometimes referred to VMQ O-Rings.
Silicone elastomers are an excellent material due to its outstanding resistance to extreme range of temperature ranging from (-59`C to 232`C) and it has good retention of compression and flexibility.&nbsp;
In addition Silicone perform excellent resistance to ozone, oxygen, moisture and water swell. Last of all, Silicone has and produces very low odour and taste elastomer therefore making it the right material to be used in food and beverage, and medical industry.
<ins>Temperature Range (Dry Heat)</ins>
Low: -75`F / -59`C High: 450`F / 232`C
<ins>Overview on Application Rating for Material Silicone </ins>
Properties (Rating)
Oils &amp; Grease - Fair
Tear Strength – Poor
Fuel Resistance - Poor
Heat Ozone &amp; Aging Resistance - Excellent
Water Swell Resistance - Excellent
Abrasion Resistance - Poor
Other than the size and material type, there is one final option that you need to take in consideration. And that is the Durometer. Durometer are being classified as an industry standard to measure the elastomer hardness. Durometer is measured and listed in accordance with “Shore A” scale. Typical standard hardness for the elastomer are 70 shore, 75 shore and 90 shore to choose from depending on the material that you are using. The higher the value of the shore indicates that the material you are using is harder. Durometer is also generally stated and accepted with a “+/- 5” tolerance. Silicone O-Rings the standard nominal durometer is 70 Shore.
<ins>Primary Usage</ins>
O-Rings and rubber seals are generally used for:
· Applications that require resistance to OIL
· Applications that are required to work in low temperatures (-0°C)
· High performance Fuel systems that requires strictly no leakage
<ul>
<li>Aircrafts</li>
<li>Marine Ships</li>
<li>F1 Cars</li>
</ul>
· General Industrial Use&nbsp;
<ins>Tips for installation of an O-ring</ins>
O-rings need to be installed properly for a perfect fit and sealing. It is important that you install the O-ring in a prescribed manner to ensure your application continues to function properly. You will also ensure you increase the life of the application.
<ins>So how do you install an O-ring?</ins>
The process of installing an O-ring into a male gland is an intricate affair that should be carefully undertaken. Glide it along the shaft so as it reaches the gland. At that point, it should easily snap into place. Simple as it might sound, a number of steps will ensure that the O-ring doesn’t get damaged.
If you want to install an O-ring correctly and within a short time, here are steps to follow:
· Covering and lubricating the threading of the shaft
The threading of the shaft has the potential of tearing the rubber seal. Cover the threads using a masking tape and then lubricate them to allow for easy passage of the O-ring. The aim is to have the O-ring slide through without getting torn.
· Don’t force it over sharp corners
That’s a tip that will save you the stress of a torn O-ring. In fact, running the O-ring over jagged or sharp objects could get it torn. You may not be able to notice some of these tears. That’s why you should ensure you prevent them from occurring in the first place.
· Even stretching
You will have to stretch the O-ring over the shaft. Ensure you do it evenly. Pulling from one side is a no-no. If anything, you should stretch the O-ring as little as possible. You will not just get a tighter grip but added security too.
· Don’t roll it down the shaft
Instead of rolling the O-ring down the shaft, slide it. If you spiral wind or roll an O-ring, it cannot be properly installed. It will also not function optimally and can even end up being damaged. If you have a lubricant, apply it on the O-ring and you will keep it rolling.
· Finishing it off
Place the female component in a manner that allows its radius to go around the corner. This should be done when you are finalizing the installation process. Ensure the lead of this component is inside the chamfer. This is how you will be able to guarantee the safety of the O-ring.
For O-rings to perform optimally, they have to be properly installed. It doesn’t just provide secure sealing but also increases the service life of the component together with the application. Don’t compromise on this process.
<ins>Installation Guide</ins>

 <div class="img-ctnr">
 <amp-img 
 on="tap:3top8"
 tabindex="0"
 role="button"
 class="contain"
 layout="fill"
 src="https://storage.googleapis.com/eezee-product-images/rp33Pm9v3AEvZ8f0~1uwlI.png"
 ></amp-img>
 </div>
 
 <amp-image-lightbox 
 id="3top8" 
 layout="nodisplay"></amp-image-lightbox>

ORING AS568 AS024 ID 28.30 X CS 1.78 Silicone 70 Shore

oring as568 as024 id 28.30 cs 1.78 silicone 70 shore 28,30 1,78 silikon ring o-ring oem gelang oem/oem代工 1.78硅胶70肖氏 o型圈 oem代工

oring-as568-as024-id-28-30-x-cs-1-78-silicone-70-shore

Loctite SI 596 Superflex Red High Temp Rtv Silicone Adhesive Sealant 300ml

LOCTITE SI 596 RED is a red, 1-part, flowable smooth, acetoxy silicone paste sealant. It forms a tough, flexible, waterproof, oil-resistant silicone rubber bond. It is also used as a sealant and adhesive in industrial furnaces, ovens, boilers, exhaust stacks, high temperature ducting and heating elements in electrical appliances. 

Resists ageing, weathering and thermal cycling without hardening, shrinking or cracking

Typically used in applications with an operating range of -50°C to +250°C

<h3 class="md-block-header-three"> Henkel Authorized Distributor</h3><h3 class="md-block-header-three">Certification of Quality (COQ) included</h3><h3 class="md-block-header-three">Loctite SI 596 Superflex Red High Temp Rtv Silicone Adhesive Sealant 300ml</h3>LOCTITE SI 596 RED is a red, 1-part, flowable smooth, acetoxy silicone paste sealant. It forms a tough, flexible, waterproof, oil-resistant silicone rubber bond. It is also used as a sealant and adhesive in industrial furnaces, ovens, boilers, exhaust stacks, high temperature ducting and heating elements in electrical appliances. <h3 class="md-block-header-three">Features:</h3><ul class="md-block-unordered-list-item"><li>Resists ageing, weathering and thermal cycling without hardening, shrinking or cracking</li><li>Typically used in applications with an operating range of -50°C to +250°C</li></ul><h3 class="md-block-header-three">Specification:</h3><ul class="md-block-unordered-list-item"><li>Brand: Loctite</li><li>Product Type: Silicone Adhesive Sealant </li><li>Colour: Red</li><li>Fixture Time: 30 min</li><li>Fixture Time Temperature: 30°C</li><li>Mix Ratio: No Mix</li><li>Physical Form: Paste</li><li>Skin Formation Time: 8 min</li><li>Weight: 300 ml</li></ul>

<h3>&nbsp;<ins>Henkel Authorized Distributor</ins></h3>
<h3><ins>Certification of Quality (COQ) included</ins></h3>
<h3>Loctite SI 596 Superflex Red High Temp Rtv Silicone Adhesive Sealant 300ml</h3>
LOCTITE SI 596 RED is a red, 1-part, flowable smooth, acetoxy silicone paste sealant. It forms a tough, flexible, waterproof, oil-resistant silicone rubber bond. It is also used as a sealant and adhesive in industrial furnaces, ovens, boilers, exhaust stacks, high temperature ducting and heating elements in electrical appliances.&nbsp;
<h3>Features:</h3>
<ul>
<li>Resists ageing, weathering and thermal cycling without hardening, shrinking or cracking</li>
<li>Typically used in applications with an operating range of -50°C to +250°C</li>
</ul>
<h3>Specification:</h3>
<ul>
<li>Brand: Loctite</li>
<li>Product Type: Silicone Adhesive Sealant&nbsp;</li>
<li>Colour: Red</li>
<li>Fixture Time: 30 min</li>
<li>Fixture Time Temperature: 30°C</li>
<li>Mix Ratio: No Mix</li>
<li>Physical Form: Paste</li>
<li>Skin Formation Time: 8 min</li>
<li>Weight: 300 ml</li>
</ul>

Ian Ong

ELORA

WEICON

METABO

Fujiplus

DEVCON

Molykote

Lubricants

Threadlocker

Degreasers

Anti Rust Coating & Lubricant

Socket Accessories

Epoxy

Grease

Other Tools

Sharon/Joey

Loctite Si 596 300ML Henkel Authorized Distributor

loctite si 596 300ml henkel authorized distributor superflex red high temp rtv silicone adhesive sealant resmi sealants pengedar sah pengedap loctite/乐泰 red高温rtv硅胶粘合密封剂300ml汉高授权分销商 密封胶 乐泰

loctite-si-596-300ml-henkel-authorized-distributor

<h3 class="md-block-header-three">Features:</h3><ul class="md-block-unordered-list-item"><li>Ribbing is easy to remove (Inside)</li><li>Groove processing for drilling exhaust holes</li><li>Stepped for easy removal</li><li>The screw hole can be masked around the washer</li></ul><h3 class="md-block-header-three">Specification:</h3><ul class="md-block-unordered-list-item"><li>Brand: Iwata</li><li>Product Type: Masking Cap C</li><li>Material: Silicone</li><li>Heat Resistant Temperature: 220°C</li><li>Hardness (Shore A): Approx. 55</li><li>Colour: Red</li><li>Corresponding Screw Size: M18</li><li>L: 25 mm</li><li>Ød: 17.2 mm</li><li>ØB: 30 mm</li></ul><h3 class="md-block-header-three">Available MOQ:</h3><ul class="md-block-unordered-list-item"><li>SKU: HLCS18-2-P - 1 Piece/Pack</li><li>SKU: HLCS18-2-B - 50 Piece/Box</li></ul>

<h3>Features:</h3>
<ul>
<li>Ribbing is easy to remove (Inside)</li>
<li>Groove processing for drilling exhaust holes</li>
<li>Stepped for easy removal</li>
<li>The screw hole can be masked around the washer</li>
</ul>
<h3>Specification:</h3>
<ul>
<li>Brand: Iwata</li>
<li>Product Type: Masking Cap C</li>
<li>Material: Silicone</li>
<li>Heat Resistant Temperature: 220°C</li>
<li>Hardness (Shore A): Approx. 55</li>
<li>Colour: Red</li>
<li>Corresponding Screw Size: M18</li>
<li>L: 25 mm</li>
<li>Ød: 17.2 mm</li>
<li>ØB: 30 mm</li>
</ul>
<h3>Available MOQ:</h3>
<ul>
<li>SKU: HLCS18-2-P - 1 Piece/Pack</li>
<li>SKU: HLCS18-2-B - 50 Piece/Box</li>
</ul>

Iwata Silicone Masking Cap C 25mm X 34mm

iwata silicone masking cap 25mm 34mm topi silikon painting tools alat melukis penutup mengecat iwata/岩田 矽胶遮蔽帽c 涂装工具 岩田

iwata-silicone-masking-cap-c-25mm-x-34mm

HLCS18-2-P - 1 Piece/Pack

HLCS18-2-B - 50 Piece/Box

A mildew-resistant silicone sealant designed for high humidity and temperature areas. It forms a durable, flexible, waterproof seal on wet area building materials, bonding well to ceramics, glass, and plastics. Commonly used for grouting tiles, bedding tile accessories, and sealing shower heads, tubs, sinks, and bathroom fixtures.

Application Temperature: -20 °C to 50 °C

#DHES #hardwarestore #hardware #hardwareshop #diyproject #powertool #homerenovation #interiordesign #homedecors #hellosingapore #renotalk #hardwarezone #Bossil #SanitarySealant #BS8132

A mildew-resistant silicone sealant designed for high humidity and temperature areas. It forms a durable, flexible, waterproof seal on wet area building materials, bonding well to ceramics, glass, and plastics. Commonly used for grouting tiles, bedding tile accessories, and sealing shower heads, tubs, sinks, and bathroom fixtures.Product Specifications:<ul class="md-block-unordered-list-item"><li>Curing System: Oxime</li><li>Appearance: Paste</li><li>Odour: Slight unique odour</li><li>Specific Gravity: 0.985</li><li>Tack-free Time: 15 – 30 mins</li><li>Application Temperature: -20 °C to 50 °C</li><li>Service Temperature: -50 °C to 150 °C</li><li>Tensile at Break JIS K 6249: ≥0.8 MPa</li><li>Elongation at Break JIS K 6249: ≥250%</li></ul>#DHES #hardwarestore #hardware #hardwareshop #diyproject #powertool #homerenovation #interiordesign #homedecors #hellosingapore #renotalk #hardwarezone #Bossil #SanitarySealant #BS8132

A mildew-resistant silicone sealant designed for high humidity and temperature areas. It forms a durable, flexible, waterproof seal on wet area building materials, bonding well to ceramics, glass, and plastics. Commonly used for grouting tiles, bedding tile accessories, and sealing shower heads, tubs, sinks, and bathroom fixtures.
Product Specifications:
<ul>
<li>Curing System: Oxime</li>
<li>Appearance: Paste</li>
<li>Odour: Slight unique odour</li>
<li>Specific Gravity: 0.985</li>
<li>Tack-free Time: 15 – 30 mins</li>
<li>Application Temperature: -20 °C to 50 °C</li>
<li>Service Temperature: -50 °C to 150 °C</li>
<li>Tensile at Break JIS K 6249: ≥0.8 MPa</li>
<li>Elongation at Break JIS K 6249: ≥250%</li>
</ul>
#DHES #hardwarestore #hardware #hardwareshop #diyproject #powertool #homerenovation #interiordesign #homedecors #hellosingapore #renotalk #hardwarezone #Bossil #SanitarySealant #BS8132

SEALXPERT

RJ LONDON PAINT

MK ELECTRIC

ATLAS FILTRI

SCHNEIDER ELECTRIC

HAGER

SHOWY

BRADY

Leak Repair

Paint Thinners, Solvents & Cleaners

Other Fasteners

Switch Socket Outlet

Bags, Filters & Accessories

Rocker Switch

Cable Carriers

Cable Ties

Mixers

Keith Pey

Bossil Mildew Resistant Anti-Fungus Silicone Sealant 8132 Made in Malaysia

bossil mildew resistant anti-fungus silicone sealant 8132 made malaysia buatan adhesive glue lem perekat silikon anti-kulat tahan cendawan gam pelekat bossil/博西尔 防霉抗真菌硅酮密封胶 马来西亚制造 胶水 博西尔

bossil-mildew-resistant-anti-fungus-silicone-sealant-8132-made-in-malaysia

75gm (2.64oz)

Weight

Applications that require resistance to OIL 

Applications that are required to work in low temperatures (-0°C) 

High performance Fuel systems that requires strictly no leakage

Covering 	and lubricating the threading of the shaft 

O-RING SILICONE 26X2 EC1935 78.1026200 048120021Primary UsageO-Rings and rubber seals are generally used for:<ul class="md-block-unordered-list-item"><li>Applications that require resistance to OIL </li><li>Applications that are required to work in low temperatures (-0°C) </li><li>High performance Fuel systems that requires strictly no leakage</li><ul class="md-block-unordered-list-item"><li>Aircrafts </li><li>Marine Ships </li><li>F1 Cars</li></ul><li>General Industrial Use </li></ul>Tips for installation of an O-ringO-rings need to be installed properly for a perfect fit and sealing. It is important that you install the O-ring in a prescribed manner to ensure your application continues to function properly. You will also ensure you increase the life of the application.So how do you install an O-ring?The process of installing an O-ring into a male gland is an intricate affair that should be carefully undertaken. Glide it along the shaft so as it reaches the gland. At that point, it should easily snap into place. Simple as it might sound, a number of steps will ensure that the O-ring doesn’t get damaged.If you want to install an O-ring correctly and within a short time, here are steps to follow:<ul class="md-block-unordered-list-item"><li>Covering 	and lubricating the threading of the shaft </li></ul>The threading of the shaft has the potential of tearing the rubber seal. Cover the threads using a masking tape and then lubricate them to allow for easy passage of the O-ring. The aim is to have the O-ring slide through without getting torn.<ul class="md-block-unordered-list-item"><li>Don’t force it over sharp corners </li></ul>That’s a tip that will save you the stress of a torn O-ring. In fact, running the O-ring over jagged or sharp objects could get it torn. You may not be able to notice some of these tears. That’s why you should ensure you prevent them from occurring in the first place.<ul class="md-block-unordered-list-item"><li>Even stretching </li></ul>You will have to stretch the O-ring over the shaft. Ensure you do it evenly. Pulling from one side is a no-no. If anything, you should stretch the O-ring as little as possible. You will not just get a tighter grip but added security too.<ul class="md-block-unordered-list-item"><li>Don’t roll it down the shaft </li></ul>Instead of rolling the O-ring down the shaft, slide it. If you spiral wind or roll an O-ring, it cannot be properly installed. It will also not function optimally and can even end up being damaged. If you have a lubricant, apply it on the O-ring and you will keep it rolling.<ul class="md-block-unordered-list-item"><li>Finishing 	it off </li></ul>Place the female component in a manner that allows its radius to go around the corner. This should be done when you are finalizing the installation process. Ensure the lead of this component is inside the chamfer. This is how you will be able to guarantee the safety of the O-ring.For O-rings to perform optimally, they have to be properly installed. It doesn’t just provide secure sealing but also increases the service life of the component together with the application. Don’t compromise on this process.Installation Guide<figure class="md-block-image"><img src="https://storage.googleapis.com/eezee-product-images/hQQ_ewcayxrxuLLMMSVQFM.png" alt="" /><figcaption class="md-block-image-caption"></figcaption></figure>

O-RING SILICONE 26X2 EC1935 78.1026200 
048120021
<ins>Primary Usage</ins>
O-Rings and rubber seals are generally used for:
<ul>
<li>Applications that require resistance to OIL&nbsp;</li>
<li>Applications that are required to work in low temperatures (-0°C)&nbsp;</li>
<li>High performance Fuel systems that requires strictly no leakage</li>
<ul>
<li>Aircrafts&nbsp;</li>
<li>Marine Ships&nbsp;</li>
<li>F1 Cars</li>
</ul>
<li>General Industrial Use&nbsp;&nbsp;&nbsp;</li>
</ul>
<ins>Tips for installation of an O-ring</ins>
O-rings need to be installed properly for a perfect fit and sealing. It is important that you install the O-ring in a prescribed manner to ensure your application continues to function properly. You will also ensure you increase the life of the application.
<ins>So how do you install an O-ring?</ins>
The process of installing an O-ring into a male gland is an intricate affair that should be carefully undertaken. Glide it along the shaft so as it reaches the gland. At that point, it should easily snap into place. Simple as it might sound, a number of steps will ensure that the O-ring doesn’t get damaged.
If you want to install an O-ring correctly and within a short time, here are steps to follow:
<ul>
<li>Covering 	and lubricating the threading of the shaft&nbsp;</li>
</ul>
The threading of the shaft has the potential of tearing the rubber seal. Cover the threads using a masking tape and then lubricate them to allow for easy passage of the O-ring. The aim is to have the O-ring slide through without getting torn.
<ul>
<li>Don’t force it over sharp corners&nbsp;</li>
</ul>
That’s a tip that will save you the stress of a torn O-ring. In fact, running the O-ring over jagged or sharp objects could get it torn. You may not be able to notice some of these tears. That’s why you should ensure you prevent them from occurring in the first place.
<ul>
<li>Even stretching&nbsp;</li>
</ul>
You will have to stretch the O-ring over the shaft. Ensure you do it evenly. Pulling from one side is a no-no. If anything, you should stretch the O-ring as little as possible. You will not just get a tighter grip but added security too.
<ul>
<li>Don’t roll it down the shaft&nbsp;</li>
</ul>
Instead of rolling the O-ring down the shaft, slide it. If you spiral wind or roll an O-ring, it cannot be properly installed. It will also not function optimally and can even end up being damaged. If you have a lubricant, apply it on the O-ring and you will keep it rolling.
<ul>
<li>Finishing 	it off&nbsp;</li>
</ul>
Place the female component in a manner that allows its radius to go around the corner. This should be done when you are finalizing the installation process. Ensure the lead of this component is inside the chamfer. This is how you will be able to guarantee the safety of the O-ring.
For O-rings to perform optimally, they have to be properly installed. It doesn’t just provide secure sealing but also increases the service life of the component together with the application. Don’t compromise on this process.
<ins>Installation Guide</ins>

 <div class="img-ctnr">
 <amp-img 
 on="tap:cs422"
 tabindex="0"
 role="button"
 class="contain"
 layout="fill"
 src="https://storage.googleapis.com/eezee-product-images/hQQ_ewcayxrxuLLMMSVQFM.png"
 ></amp-img>
 </div>
 
 <amp-image-lightbox 
 id="cs422" 
 layout="nodisplay"></amp-image-lightbox>

O-RING Silicone 26X2 EC1935 78.1026200

o-ring silicone 26x2 ec1935 78.1026200 silikon ring oem gelang oem/oem代工 型圈 硅胶 o型圈 oem代工

o-ring-silicone-26x2-ec1935-78-1026200

JUN WEI

Dade

Supersun

SKYHAWK

JETECH TOOL

KING TONY

NIPPON

Hunter Tapes

R'deer

Drill Bits & Drill Bit Sets

Ropes & Chains

Spray Paints

Building Materials

Writing Materials

Hole Saws

Tarpaulin & Canvas 

Safety Shoes

Selleys Silicone S301-WHITE

selleys silicone s301-white silikon sealants sealant pengedap 硅胶 s301-白色 密封胶 塞利斯

selleys-silicone-s301-white

Permatex Sensor-Safe Grey RTV Silicone Gasket Maker 85g 89147

Permatex Sensor-Safe Grey RTV Silicone Gasket Maker is a single component, room temperature, vulcanizing, gasketing compound designed to provide reliable ""formed-in-place"" gaskets for mechanical assemblies. This material cures on exposure to moisture in the air to form a tough, flexible, silicone rubber gasket. The product resists aging, weathering and thermal cycling without hardening, shrinking or cracking. 

Can be used as a gasket maker or dressing

<h3 class="md-block-header-three">Permatex Sensor-Safe Grey RTV Silicone Gasket Maker 85g 89147</h3>Permatex Sensor-Safe Grey RTV Silicone Gasket Maker is a single component, room temperature, vulcanizing, gasketing compound designed to provide reliable &quot;&quot;formed-in-place&quot;&quot; gaskets for mechanical assemblies. This material cures on exposure to moisture in the air to form a tough, flexible, silicone rubber gasket. The product resists aging, weathering and thermal cycling without hardening, shrinking or cracking. <h3 class="md-block-header-three">Features:</h3><ul class="md-block-unordered-list-item"><li>Improved oil resistance</li><li>Sensor-safe, non-corrosive</li><li>Good adhesion and flexibility</li><li>Replaces most cut gaskets</li><li>Can be used as a gasket maker or dressing</li><li>Non-flammable</li><li>Non-toxic</li><li>Low odour </li></ul><h3 class="md-block-header-three">Application:</h3><ul class="md-block-unordered-list-item"><li>Pump housings</li><li>Machine tools</li><li>Compressors</li><li>Gearboxes</li><li>Valve covers</li><li>Oil pans</li><li>Transmission pans</li></ul><h3 class="md-block-header-three">Specification:</h3><ul class="md-block-unordered-list-item"><li>Brand: Permatex</li><li>Product Type: Silicone Gasket Maker</li><li>Colour: Grey</li><li>Packaging Type: Tube</li><li>Weight: 85 g</li></ul>

<h3>Permatex Sensor-Safe Grey RTV Silicone Gasket Maker 85g 89147</h3>
Permatex Sensor-Safe Grey RTV Silicone Gasket Maker is a single component, room temperature, vulcanizing, gasketing compound designed to provide reliable ""formed-in-place"" gaskets for mechanical assemblies. This material cures on exposure to moisture in the air to form a tough, flexible, silicone rubber gasket. The product resists aging, weathering and thermal cycling without hardening, shrinking or cracking.&nbsp;
<h3>Features:</h3>
<ul>
<li>Improved oil resistance</li>
<li>Sensor-safe, non-corrosive</li>
<li>Good adhesion and flexibility</li>
<li>Replaces most cut gaskets</li>
<li>Can be used as a gasket maker or dressing</li>
<li>Non-flammable</li>
<li>Non-toxic</li>
<li>Low odour&nbsp;</li>
</ul>
<h3>Application:</h3>
<ul>
<li>Pump housings</li>
<li>Machine tools</li>
<li>Compressors</li>
<li>Gearboxes</li>
<li>Valve covers</li>
<li>Oil pans</li>
<li>Transmission pans</li>
</ul>
<h3>Specification:</h3>
<ul>
<li>Brand: Permatex</li>
<li>Product Type: Silicone Gasket Maker</li>
<li>Colour: Grey</li>
<li>Packaging Type: Tube</li>
<li>Weight: 85 g</li>
</ul>