Murr Elektronik

RS Pro

SCHNEIDER ELECTRIC

Electricals

electricals

Auxiliary Contact

auxiliary-contact

Circuit Breaker Accessories

circuit-breaker-accessories

Contactors

contactors

Emergency Stop Push Buttons

emergency-stop-push-buttons

Fuses

fuses

Fuse Switch Disconnectors

fuse-switch-disconnectors

Circuit Breakers

circuit-breakers

Molded Case Circuit Breakers - MCCBs

molded-case-circuit-breakers-mccbs

Monitoring Relays

monitoring-relays

Motor Starter

motor-starter

Overload Relays

overload-relays

Electrical Switches

electrical-switches

Switch Disconnectors

switch-disconnectors

Tag Fuses

tag-fuses

Time Delay Contact Block

time-delay-contact-block

RS PRO Datasheet

Siemens

STANLEY

Facom

ECLIPSE TOOLS

GEARWRENCH

Startech

MEAN WELL

Screw

O Ring

Plugs & Connector 

Surface Mount Resistors

Bolts

Panel Mount Indicators 

Button Switch

Electrical Wire 

Aluminium Capacitors

Air Filters

RS Components ETH SG

buyerIntroduction

Rs Pro 2213711 25A Bolted Tag Fuse, A2, 250 V Dc, 690 V Ac, 73mm (1 Bag of 5)

rs pro 2213711 25a bolted tag fuse, a2, 250 dc, 690 ac, 73mm (1 bag 5) sekring baut, kantong isi fuses fius 25a, beg 螺栓式标签保险丝，a2，250 直流，690 交流，73 毫米（1 个） rs专业版

rs-pro-2213711-25a-bolted-tag-fuse-a2-250-v-dc-690-v-ac-73mm-1-bag-of-5

Rs Pro 2213710 25A Bolted Tag Fuse, A2, 250 V Dc, 690 V Ac, 73mm

rs pro 2213710 25a bolted tag fuse, a2, 250 dc, 690 ac, 73mm sekring baut, fuses fius 25a, 螺栓式标签保险丝，a2，250 直流，690 交流，73mm rs专业版

rs-pro-2213710-25a-bolted-tag-fuse-a2-250-v-dc-690-v-ac-73mm

Rs Pro 2213715 40A Bolted Tag Fuse, A3, 250 V Dc, 690 V Ac, 73mm

rs pro 2213715 40a bolted tag fuse, a3, 250 dc, 690 ac, 73mm sekring baut, fuses fius 40a, 螺栓式标签保险丝，a3，250 直流，690 交流，73mm rs专业版

rs-pro-2213715-40a-bolted-tag-fuse-a3-250-v-dc-690-v-ac-73mm

Rs Pro 2213714 40A Bolted Tag Fuse, A3, 250 V Dc, 690 V Ac, 73mm

rs pro 2213714 40a bolted tag fuse, a3, 250 dc, 690 ac, 73mm sekring baut, fuses fius 40a, 螺栓式标签保险丝，a3，250 直流，690 交流，73mm rs专业版

rs-pro-2213714-40a-bolted-tag-fuse-a3-250-v-dc-690-v-ac-73mm

Abb NF22E-13 Relay Control 690V 2NO+2NC 6A 100-250V50/60HZ-DC

Catalog Description:NF22E-13 100-250V50/60HZ-DC Contactor Relay

Long Description:NF contactor relays are used for switching auxiliary and control circuits. NF contactor relays include an electronic coil interface accepting a wide control voltage Uc min. ... Uc max. Only four coils cover control voltages between 24...500 V 50/60 Hz or 20...500 V DC. NF contactor relays can manage large control voltage variations. One coil can be used for different control voltages used worldwide without any coil change. NF contactor relays have built-in surge protection and do not require additional surge suppressors. - Poles: 4-pole contactor relays (mechanically-linked auxiliary contacts compliant with Annex L of IEC 60947-5-1 and including the "Mechanically Linked" symbol on the contactor relay side) - Control Circuit: AC or DC operated - Accessories: a wide range of Accessories is available.

Standards:IEC/EN 60947-1, IEC/EN 60947-5-1, UL 508, CSA C22.2 No. 14-13

Rated Operational Voltage:Auxiliary Circuit 690 V

Rated Frequency (f):Auxiliary Circuit 50 / 60 Hz

Conventional Free-air Thermal Current (Ith):acc. to IEC 60947-5-1, Θ = 40 °C 16 A

Rated Operational Current AC-15 (Ie):(500 V) 2 A

Rated Short-time Withstand Current Low Voltage (Icw):for 0.1 s 140 A

Maximum Electrical Switching Frequency:(AC-15) 1200 cycles per hour

Rated Operational Current DC-13 (Ie):(24 V) 6 A / 144 W

Rated Insulation Voltage (Ui):acc. to IEC 60947-5-1 690 V

Rated Impulse Withstand Voltage (Uimp):6 kV

Maximum Mechanical Switching Frequency:6000 cycles per hour

Rated Control Circuit Voltage (Uc):50 Hz 100 ... 250 V

Operate Time:Between Coil De-energization and NC Contact Closing 13 ... 98 ms

Between Coil De-energization and NO Contact Opening 11 ... 95 ms

Between Coil Energization and NC Contact Opening 38 ... 90 ms

Between Coil Energization and NO Contact Closing 40 ... 95 ms

Mounting on DIN Rail:TH35-15 (35 x 15 mm Mounting Rail) acc. to IEC 60715

TH35-7.5 (35 x 7.5 mm Mounting Rail) acc. to IEC 60715

Mounting by Screws (not supplied):2 x M4 screws placed diagonally

Connecting Capacity Auxiliary Circuit:Flexible with Ferrule 1/2x 0.75 ... 2.5 mm²

Flexible with Insulated Ferrule 1x 0.75 ... 2.5 mm²

Flexible with Insulated Ferrule 2x 0.75 ... 1.5 mm²

Connecting Capacity Control Circuit:Flexible with Ferrule 1/2x 0.75 ... 2.5 mm²

Wire Stripping Length:Auxiliary Circuit 10 mm

Degree of Protection:acc. to IEC 60529, IEC 60947-1, EN 60529 Auxiliary Terminals IP20

acc. to IEC 60529, IEC 60947-1, EN 60529 Coil Terminals IP20

<h3 class="md-block-header-three"><strong class="md-inline-bold">Abb NF22E-13 Relay Control 690V 2NO+2NC 6A 100-250V50/60HZ-DC</strong></h3><p class="md-block-unstyled">  </p><ul class="md-block-unordered-list-item"><li>Extended Product Type:NF22E-13</li><li>Product ID:1SBH137001R1322</li><li>EAN:3471523100138</li><li>Catalog Description:NF22E-13 100-250V50/60HZ-DC Contactor Relay</li><li>Long Description:NF contactor relays are used for switching auxiliary and control circuits. NF contactor relays include an electronic coil interface accepting a wide control voltage Uc min. ... Uc max. Only four coils cover control voltages between 24...500 V 50/60 Hz or 20...500 V DC. NF contactor relays can manage large control voltage variations. One coil can be used for different control voltages used worldwide without any coil change. NF contactor relays have built-in surge protection and do not require additional surge suppressors. - Poles: 4-pole contactor relays (mechanically-linked auxiliary contacts compliant with Annex L of IEC 60947-5-1 and including the &quot;Mechanically Linked&quot; symbol on the contactor relay side) - Control Circuit: AC or DC operated - Accessories: a wide range of Accessories is available.</li><li>Unit of Measurement : Pcs</li></ul><p class="md-block-unstyled"><strong class="md-inline-bold">Technical</strong></p><ul class="md-block-unordered-list-item"><li>Number of Auxiliary Contacts NO:2</li><li>Number of Auxiliary Contacts NC:2</li><li>Standards:IEC/EN 60947-1, IEC/EN 60947-5-1, UL 508, CSA C22.2 No. 14-13</li><li>Rated Operational Voltage:Auxiliary Circuit 690 V</li><li>Rated Frequency (f):Auxiliary Circuit 50 / 60 Hz</li><li>Control Circuit 50 / 60 Hz</li><li>Conventional Free-air Thermal Current (Ith):acc. to IEC 60947-5-1, Θ = 40 °C 16 A</li><li>Rated Operational Current AC-15 (Ie):(500 V) 2 A</li><li>(690 V) 2 A</li><li>(24 / 127 V) 6 A</li><li>(220 / 240 V) 4 A</li><li>(400 / 440 V) 3 A</li><li>Rated Short-time Withstand Current Low Voltage (Icw):for 0.1 s 140 A</li><li>for 1 s 100 A</li><li>Maximum Electrical Switching Frequency:(AC-15) 1200 cycles per hour</li><li>(DC-13) 900 cycles per hour</li><li>Rated Operational Current DC-13 (Ie):(24 V) 6 A / 144 W</li><li>(48 V) 2.8 A / 134 W</li><li>(72 V) 1 A / 72 W</li><li>(110 V) 0.55 A / 60 W</li><li>(125 V) 0.55 A / 69 W</li><li>(220 V) 0.27 A / 60 W</li><li>(250 V) 0.27 A / 68 W</li><li>(400 V) 0.15 A / 60 W</li><li>(500 V) 0.13 A / 65 W</li><li>(600 V) 0.1 A / 60 W</li><li>Rated Insulation Voltage (Ui):acc. to IEC 60947-5-1 690 V</li><li>acc. to UL/CSA 600 V</li><li>Rated Impulse Withstand Voltage (Uimp):6 kV</li><li>Maximum Mechanical Switching Frequency:6000 cycles per hour</li><li>Rated Control Circuit Voltage (Uc):50 Hz 100 ... 250 V</li><li>60 Hz 100 ... 250 V</li><li>DC Operation 100 ... 250 V</li><li>Operate Time:Between Coil De-energization and NC Contact Closing 13 ... 98 ms</li><li>Between Coil De-energization and NO Contact Opening 11 ... 95 ms</li><li>Between Coil Energization and NC Contact Opening 38 ... 90 ms</li><li>Between Coil Energization and NO Contact Closing 40 ... 95 ms</li><li>Mounting on DIN Rail:TH35-15 (35 x 15 mm Mounting Rail) acc. to IEC 60715</li><li>TH35-7.5 (35 x 7.5 mm Mounting Rail) acc. to IEC 60715</li><li>Mounting by Screws (not supplied):2 x M4 screws placed diagonally</li><li>Connecting Capacity Auxiliary Circuit:Flexible with Ferrule 1/2x 0.75 ... 2.5 mm²</li><li>Flexible with Insulated Ferrule 1x 0.75 ... 2.5 mm²</li><li>Flexible with Insulated Ferrule 2x 0.75 ... 1.5 mm²</li><li>Rigid Solid 1/2x 1 ... 2.5 mm²</li><li>Rigid Stranded 1/2x 1 ... 2.5 mm²</li><li>Connecting Capacity Control Circuit:Flexible with Ferrule 1/2x 0.75 ... 2.5 mm²</li><li>Flexible with Insulated Ferrule 1x 0.75 ... 2.5 mm²</li><li>Flexible with Insulated Ferrule 2x 0.75 ... 1.5 mm²</li><li>Rigid Solid 1/2x 1 ... 2.5 mm²</li><li>Rigid Stranded 1/2x 1 ... 2.5 mm²</li><li>Wire Stripping Length:Auxiliary Circuit 10 mm</li><li>Control Circuit 10 mm</li><li>Degree of Protection:acc. to IEC 60529, IEC 60947-1, EN 60529 Auxiliary Terminals IP20</li><li>acc. to IEC 60529, IEC 60947-1, EN 60529 Coil Terminals IP20</li><li>Terminal Type:Screw Terminals</li></ul>

<h3><strong>Abb NF22E-13 Relay Control 690V 2NO+2NC 6A 100-250V50/60HZ-DC</strong></h3>
<p>&nbsp;&nbsp;</p>
<ul>
<li>Extended Product Type:NF22E-13</li>
<li>Product ID:1SBH137001R1322</li>
<li>EAN:3471523100138</li>
<li>Catalog Description:NF22E-13 100-250V50/60HZ-DC Contactor Relay</li>
<li>Long Description:NF contactor relays are used for switching auxiliary and control circuits. NF contactor relays include an electronic coil interface accepting a wide control voltage Uc min. ... Uc max. Only four coils cover control voltages between 24...500 V 50/60 Hz or 20...500 V DC. NF contactor relays can manage large control voltage variations. One coil can be used for different control voltages used worldwide without any coil change. NF contactor relays have built-in surge protection and do not require additional surge suppressors. - Poles: 4-pole contactor relays (mechanically-linked auxiliary contacts compliant with Annex L of IEC 60947-5-1 and including the "Mechanically Linked" symbol on the contactor relay side) - Control Circuit: AC or DC operated - Accessories: a wide range of Accessories is available.</li>
<li>Unit of Measurement : Pcs</li>
</ul>
<p><strong>Technical</strong></p>
<ul>
<li>Number of Auxiliary Contacts NO:2</li>
<li>Number of Auxiliary Contacts NC:2</li>
<li>Standards:IEC/EN 60947-1, IEC/EN 60947-5-1, UL 508, CSA C22.2 No. 14-13</li>
<li>Rated Operational Voltage:Auxiliary Circuit 690 V</li>
<li>Rated Frequency (f):Auxiliary Circuit 50 / 60 Hz</li>
<li>Control Circuit 50 / 60 Hz</li>
<li>Conventional Free-air Thermal Current (Ith):acc. to IEC 60947-5-1, Θ = 40 °C 16 A</li>
<li>Rated Operational Current AC-15 (Ie):(500 V) 2 A</li>
<li>(690 V) 2 A</li>
<li>(24 / 127 V) 6 A</li>
<li>(220 / 240 V) 4 A</li>
<li>(400 / 440 V) 3 A</li>
<li>Rated Short-time Withstand Current Low Voltage (Icw):for 0.1 s 140 A</li>
<li>for 1 s 100 A</li>
<li>Maximum Electrical Switching Frequency:(AC-15) 1200 cycles per hour</li>
<li>(DC-13) 900 cycles per hour</li>
<li>Rated Operational Current DC-13 (Ie):(24 V) 6 A / 144 W</li>
<li>(48 V) 2.8 A / 134 W</li>
<li>(72 V) 1 A / 72 W</li>
<li>(110 V) 0.55 A / 60 W</li>
<li>(125 V) 0.55 A / 69 W</li>
<li>(220 V) 0.27 A / 60 W</li>
<li>(250 V) 0.27 A / 68 W</li>
<li>(400 V) 0.15 A / 60 W</li>
<li>(500 V) 0.13 A / 65 W</li>
<li>(600 V) 0.1 A / 60 W</li>
<li>Rated Insulation Voltage (Ui):acc. to IEC 60947-5-1 690 V</li>
<li>acc. to UL/CSA 600 V</li>
<li>Rated Impulse Withstand Voltage (Uimp):6 kV</li>
<li>Maximum Mechanical Switching Frequency:6000 cycles per hour</li>
<li>Rated Control Circuit Voltage (Uc):50 Hz 100 ... 250 V</li>
<li>60 Hz 100 ... 250 V</li>
<li>DC Operation 100 ... 250 V</li>
<li>Operate Time:Between Coil De-energization and NC Contact Closing 13 ... 98 ms</li>
<li>Between Coil De-energization and NO Contact Opening 11 ... 95 ms</li>
<li>Between Coil Energization and NC Contact Opening 38 ... 90 ms</li>
<li>Between Coil Energization and NO Contact Closing 40 ... 95 ms</li>
<li>Mounting on DIN Rail:TH35-15 (35 x 15 mm Mounting Rail) acc. to IEC 60715</li>
<li>TH35-7.5 (35 x 7.5 mm Mounting Rail) acc. to IEC 60715</li>
<li>Mounting by Screws (not supplied):2 x M4 screws placed diagonally</li>
<li>Connecting Capacity Auxiliary Circuit:Flexible with Ferrule 1/2x 0.75 ... 2.5 mm²</li>
<li>Flexible with Insulated Ferrule 1x 0.75 ... 2.5 mm²</li>
<li>Flexible with Insulated Ferrule 2x 0.75 ... 1.5 mm²</li>
<li>Rigid Solid 1/2x 1 ... 2.5 mm²</li>
<li>Rigid Stranded 1/2x 1 ... 2.5 mm²</li>
<li>Connecting Capacity Control Circuit:Flexible with Ferrule 1/2x 0.75 ... 2.5 mm²</li>
<li>Flexible with Insulated Ferrule 1x 0.75 ... 2.5 mm²</li>
<li>Flexible with Insulated Ferrule 2x 0.75 ... 1.5 mm²</li>
<li>Rigid Solid 1/2x 1 ... 2.5 mm²</li>
<li>Rigid Stranded 1/2x 1 ... 2.5 mm²</li>
<li>Wire Stripping Length:Auxiliary Circuit 10 mm</li>
<li>Control Circuit 10 mm</li>
<li>Degree of Protection:acc. to IEC 60529, IEC 60947-1, EN 60529 Auxiliary Terminals IP20</li>
<li>acc. to IEC 60529, IEC 60947-1, EN 60529 Coil Terminals IP20</li>
<li>Terminal Type:Screw Terminals</li>
</ul>


Jimmy Foo

Philips

Thomas & Betts

BRADY

Bussmann

Weidmuller

FUJI

MILWAUKEE TOOL

Fuses & Fusegear

Light Bulbs

Led Lights

Circuit Breaker

Pilot Lights

Junction & Enclosure Box

Other Electrical Accessories

Doreen Tan

abb nf22e-13 relay control 690v 2no+2nc 6a 100-250v50/60hz-dc kontrol relai monitoring relays pemantauan kawalan geganti 继电器控制 监控继电器

abb-nf22e-13-relay-control-690v-2no-2nc-6a-100-250v50-60hz-dc

Abb BC7-30-10-01 Contactor Mini 24VDC 3P 3NO

Catalog Description:BC7-30-10-01 Mini Contactor 24 V DC - 3 NO - 0 NC - Screw Terminals

Long Description:The BC7-30-10 mini contactor is a compact 3 pole contactor with 1 auxiliary contact and screw terminals. They are ideally suited for applications where reliability is a must and space is at a premium. Mini contactors are used in residential buldings, commercial buildings and industrial applications for the control of single or three-phase loads up to 5.5 kW (AC-3) and 20 A / 690 V (AC-1) or switching of control signals. Further features are the noiseless and hum-free coil, a switch position indication and the integrated possibility for rail or wall mounting.

Rated Operational Voltage:Auxiliary Circuit 690 V AC

Rated Impulse Withstand Voltage (Uimp):Auxiliary Circuit 6 kV

Rated Operational Current AC-1 (Ie):(220 / 240 V) 40 °C 20 A

Rated Operational Power AC-3 (Pe):(230 V) Three Phase 3 kW

Rated Short-time Withstand Current Low Voltage (Icw):at 40 °C Ambient Temp, in Free Air, from a Cold State 10 s 96 A

Rated Operational Current AC-15 (Ie):(24 V) 4 A

Rated Operational Current DC-13 (Ie):(24 V) 2.5 A

Conventional Free-air Thermal Current (Ith):Main Circuit 20 A

Rated Control Circuit Voltage (Uc):24 V DC

Coil Operating Limits:(acc. to IEC 60947-4-1) for DC supply 0.85 ... 1.1 x Uc (at θ ≤ 55 °C)

Degree of Protection:Auxiliary Circuit Terminals IP20

Minimum Switching Capacity:Auxiliary Circuit 17 V

Maximum Electrical Switching Frequency:(AC-1) 300 cycles per hour

Connecting Capacity Main Circuit:Flexible with Ferrule 1/2x 1 ... 2.5 mm²

Flexible with Insulated Ferrule 1/2x 1 ... 2.5 mm²

Connecting Capacity Auxiliary Circuit:Flexible with Ferrule 1/2x 1 ... 2.5 mm²

Connecting Capacity Control Circuit:Flexible with Ferrule 1/2x 1 ... 2.5 mm²

Wire Stripping Length:Auxiliary Circuit 9 mm

Tightening Torque:Auxiliary Circuit 0.8 ... 1.1 N·m

Power Loss:at Rated Operating Conditions per Pole 2 W

at Rated Operating Conditions AC-1 per Pole 1.4 W

<h3 class="md-block-header-three"><strong class="md-inline-bold">Abb BC7-30-10-01 Contactor Mini 24VDC 3P 3NO</strong></h3><p class="md-block-unstyled">  </p><ul class="md-block-unordered-list-item"><li>Extended Product Type:BC7-30-10-01</li><li>Product ID:GJL1313001R0101</li><li>EAN:4013614150159</li><li>Catalog Description:BC7-30-10-01 Mini Contactor 24 V DC - 3 NO - 0 NC - Screw Terminals</li><li>Long Description:The BC7-30-10 mini contactor is a compact 3 pole contactor with 1 auxiliary contact and screw terminals. They are ideally suited for applications where reliability is a must and space is at a premium. Mini contactors are used in residential buldings, commercial buildings and industrial applications for the control of single or three-phase loads up to 5.5 kW (AC-3) and 20 A / 690 V (AC-1) or switching of control signals. Further features are the noiseless and hum-free coil, a switch position indication and the integrated possibility for rail or wall mounting.</li><li>Number of Poles:3</li><li>Mini Contactor Type:Mini Contactor</li><li>Rated Operational Voltage:Auxiliary Circuit 690 V AC</li><li>Auxiliary Circuit 250 V DC</li><li>Main Circuit 690 V AC</li><li>Main Circuit 220 V DC</li><li>Rated Frequency (f):Control Circuit DC</li><li>Main Circuit 60 Hz</li><li>Main Circuit 50 Hz</li><li>Main Circuit DC</li><li>Rated Impulse Withstand Voltage (Uimp):Auxiliary Circuit 6 kV</li><li>Main Circuit 6 kV</li><li>Rated Insulation Voltage (Ui):690 V</li><li>acc. to UL/CSA 600 V</li><li>Number of Main Contacts NC:0</li><li>Number of Main Contacts NO:3</li><li>Rated Operational Current AC-1 (Ie):(220 / 240 V) 40 °C 20 A</li><li>(220 / 240 V) 55 °C 16 A</li><li>(380 / 440 V) 40 °C 20 A</li><li>(380 / 440 V) 55 °C 16 A</li><li>(690 V) 40 °C 6 A</li><li>(690 V) 55 °C 6 A</li><li>Rated Operational Power AC-3 (Pe):(230 V) Three Phase 3 kW</li><li>(400 V) Three Phase 5.5 kW</li><li>(500 V) Three Phase 5.5 kW</li><li>(690 V) Three Phase, NO 3 kW</li><li>Rated Short-time Withstand Current Low Voltage (Icw):at 40 °C Ambient Temp, in Free Air, from a Cold State 10 s 96 A</li><li>Number of Auxiliary Contacts NC:0</li><li>Number of Auxiliary Contacts NO:1</li><li>Rated Operational Current AC-15 (Ie):(24 V) 4 A</li><li>(120 V) 4 A</li><li>(500 V) 2 A</li><li>(220 / 240 V) 4 A</li><li>(380 / 400 V) 3 A</li><li>Rated Operational Current DC-13 (Ie):(24 V) 2.5 A</li><li>(110 V) 0.7 A</li><li>(220 / 240 V) 0.4 A</li><li>Conventional Free-air Thermal Current (Ith):Main Circuit 20 A</li><li>Rated Control Circuit Voltage (Uc):24 V DC</li><li>Coil Operating Limits:(acc. to IEC 60947-4-1) for DC supply 0.85 ... 1.1 x Uc (at θ ≤ 55 °C)</li><li>Degree of Protection:Auxiliary Circuit Terminals IP20</li><li>Control Circuit Terminals IP20</li><li>Main Circuit Terminals IP20</li><li>Mechanical Durability:10000000 cycle</li><li>Minimum Switching Capacity:Auxiliary Circuit 17 V</li><li>Auxiliary Circuit 5 mA</li><li>Maximum Electrical Switching Frequency:(AC-1) 300 cycles per hour</li><li>(AC-15) 600 cycles per hour</li><li>(AC-3) 600 cycles per hour</li><li>(DC-1) 600 cycles per hour</li><li>(DC-13) 600 cycles per hour</li><li>(DC-3) 600 cycles per hour</li><li>Connecting Capacity Main Circuit:Flexible with Ferrule 1/2x 1 ... 2.5 mm²</li><li>Flexible with Insulated Ferrule 1/2x 1 ... 2.5 mm²</li><li>Flexible 1/2x 1 ... 2.5 mm²</li><li>Rigid 1/2x 1 ... 4 mm²</li><li>Connecting Capacity Auxiliary Circuit:Flexible with Ferrule 1/2x 1 ... 2.5 mm²</li><li>Flexible with Insulated Ferrule 1/2x 1 ... 2.5 mm²</li><li>Flexible 1/2x 1 ... 2.5 mm²</li><li>Rigid 1/2x 1 ... 4 mm²</li><li>Connecting Capacity Control Circuit:Flexible with Ferrule 1/2x 1 ... 2.5 mm²</li><li>Flexible with Insulated Ferrule 1/2x 1 ... 2.5 mm²</li><li>Flexible 1/2x 1 ... 2.5 mm²</li><li>Rigid 1/2x 1 ... 4 mm²</li><li>Wire Stripping Length:Auxiliary Circuit 9 mm</li><li>Main Circuit 9 mm</li><li>Tightening Torque:Auxiliary Circuit 0.8 ... 1.1 N·m</li><li>Control Circuit 0.8 ... 1.1 N·m</li><li>Main Circuit 0.8 ... 1.1 N·m</li><li>Recommended Screw Driver:M3</li><li>Pozidriv 1</li><li>Mounting on DIN Rail:TH35-15 (35 x 15 mm Mounting Rail) acc. to IEC 60715</li><li>TH35-7.5 (35 x 7.5 mm Mounting Rail) acc. to IEC 60715</li><li>Power Loss:at Rated Operating Conditions per Pole 2 W</li><li>at Rated Operating Conditions AC-1 per Pole 1.4 W</li><li>Standards:IEC/EN 60947-1</li><li>IEC/EN 60947-4-1</li><li>IEC/EN 60947-5-1</li><li>UL 60947-1</li><li>UL 60947-4-1</li><li>Unit of Measurement : Pcs</li></ul>

<h3><strong>Abb BC7-30-10-01 Contactor Mini 24VDC 3P 3NO</strong></h3>
<p>&nbsp;&nbsp;</p>
<ul>
<li>Extended Product Type:BC7-30-10-01</li>
<li>Product ID:GJL1313001R0101</li>
<li>EAN:4013614150159</li>
<li>Catalog Description:BC7-30-10-01 Mini Contactor 24 V DC - 3 NO - 0 NC - Screw Terminals</li>
<li>Long Description:The BC7-30-10 mini contactor is a compact 3 pole contactor with 1 auxiliary contact and screw terminals. They are ideally suited for applications where reliability is a must and space is at a premium. Mini contactors are used in residential buldings, commercial buildings and industrial applications for the control of single or three-phase loads up to 5.5 kW (AC-3) and 20 A / 690 V (AC-1) or switching of control signals. Further features are the noiseless and hum-free coil, a switch position indication and the integrated possibility for rail or wall mounting.</li>
<li>Number of Poles:3</li>
<li>Mini Contactor Type:Mini Contactor</li>
<li>Rated Operational Voltage:Auxiliary Circuit 690 V AC</li>
<li>Auxiliary Circuit 250 V DC</li>
<li>Main Circuit 690 V AC</li>
<li>Main Circuit 220 V DC</li>
<li>Rated Frequency (f):Control Circuit DC</li>
<li>Main Circuit 60 Hz</li>
<li>Main Circuit 50 Hz</li>
<li>Main Circuit DC</li>
<li>Rated Impulse Withstand Voltage (Uimp):Auxiliary Circuit 6 kV</li>
<li>Main Circuit 6 kV</li>
<li>Rated Insulation Voltage (Ui):690 V</li>
<li>acc. to UL/CSA 600 V</li>
<li>Number of Main Contacts NC:0</li>
<li>Number of Main Contacts NO:3</li>
<li>Rated Operational Current AC-1 (Ie):(220 / 240 V) 40 °C 20 A</li>
<li>(220 / 240 V) 55 °C 16 A</li>
<li>(380 / 440 V) 40 °C 20 A</li>
<li>(380 / 440 V) 55 °C 16 A</li>
<li>(690 V) 40 °C 6 A</li>
<li>(690 V) 55 °C 6 A</li>
<li>Rated Operational Power AC-3 (Pe):(230 V) Three Phase 3 kW</li>
<li>(400 V) Three Phase 5.5 kW</li>
<li>(500 V) Three Phase 5.5 kW</li>
<li>(690 V) Three Phase, NO 3 kW</li>
<li>Rated Short-time Withstand Current Low Voltage (Icw):at 40 °C Ambient Temp, in Free Air, from a Cold State 10 s 96 A</li>
<li>Number of Auxiliary Contacts NC:0</li>
<li>Number of Auxiliary Contacts NO:1</li>
<li>Rated Operational Current AC-15 (Ie):(24 V) 4 A</li>
<li>(120 V) 4 A</li>
<li>(500 V) 2 A</li>
<li>(220 / 240 V) 4 A</li>
<li>(380 / 400 V) 3 A</li>
<li>Rated Operational Current DC-13 (Ie):(24 V) 2.5 A</li>
<li>(110 V) 0.7 A</li>
<li>(220 / 240 V) 0.4 A</li>
<li>Conventional Free-air Thermal Current (Ith):Main Circuit 20 A</li>
<li>Rated Control Circuit Voltage (Uc):24 V DC</li>
<li>Coil Operating Limits:(acc. to IEC 60947-4-1) for DC supply 0.85 ... 1.1 x Uc (at θ ≤ 55 °C)</li>
<li>Degree of Protection:Auxiliary Circuit Terminals IP20</li>
<li>Control Circuit Terminals IP20</li>
<li>Main Circuit Terminals IP20</li>
<li>Mechanical Durability:10000000 cycle</li>
<li>Minimum Switching Capacity:Auxiliary Circuit 17 V</li>
<li>Auxiliary Circuit 5 mA</li>
<li>Maximum Electrical Switching Frequency:(AC-1) 300 cycles per hour</li>
<li>(AC-15) 600 cycles per hour</li>
<li>(AC-3) 600 cycles per hour</li>
<li>(DC-1) 600 cycles per hour</li>
<li>(DC-13) 600 cycles per hour</li>
<li>(DC-3) 600 cycles per hour</li>
<li>Connecting Capacity Main Circuit:Flexible with Ferrule 1/2x 1 ... 2.5 mm²</li>
<li>Flexible with Insulated Ferrule 1/2x 1 ... 2.5 mm²</li>
<li>Flexible 1/2x 1 ... 2.5 mm²</li>
<li>Rigid 1/2x 1 ... 4 mm²</li>
<li>Connecting Capacity Auxiliary Circuit:Flexible with Ferrule 1/2x 1 ... 2.5 mm²</li>
<li>Flexible with Insulated Ferrule 1/2x 1 ... 2.5 mm²</li>
<li>Flexible 1/2x 1 ... 2.5 mm²</li>
<li>Rigid 1/2x 1 ... 4 mm²</li>
<li>Connecting Capacity Control Circuit:Flexible with Ferrule 1/2x 1 ... 2.5 mm²</li>
<li>Flexible with Insulated Ferrule 1/2x 1 ... 2.5 mm²</li>
<li>Flexible 1/2x 1 ... 2.5 mm²</li>
<li>Rigid 1/2x 1 ... 4 mm²</li>
<li>Wire Stripping Length:Auxiliary Circuit 9 mm</li>
<li>Main Circuit 9 mm</li>
<li>Tightening Torque:Auxiliary Circuit 0.8 ... 1.1 N·m</li>
<li>Control Circuit 0.8 ... 1.1 N·m</li>
<li>Main Circuit 0.8 ... 1.1 N·m</li>
<li>Recommended Screw Driver:M3</li>
<li>Pozidriv 1</li>
<li>Mounting on DIN Rail:TH35-15 (35 x 15 mm Mounting Rail) acc. to IEC 60715</li>
<li>TH35-7.5 (35 x 7.5 mm Mounting Rail) acc. to IEC 60715</li>
<li>Power Loss:at Rated Operating Conditions per Pole 2 W</li>
<li>at Rated Operating Conditions AC-1 per Pole 1.4 W</li>
<li>Standards:IEC/EN 60947-1</li>
<li>IEC/EN 60947-4-1</li>
<li>IEC/EN 60947-5-1</li>
<li>UL 60947-1</li>
<li>UL 60947-4-1</li>
<li>Unit of Measurement : Pcs</li>
</ul>


Crouse-Hinds

Light Tubes

abb bc7-30-10-01 contactor mini 24vdc 3p 3no kontaktor contactors para kontraktor penyentuh penghubung bc7-30-10-01接触器迷你24vdc 接触器

abb-bc7-30-10-01-contactor-mini-24vdc-3p-3no

Catalog Description:MS132-4.0 Manual Motor Starter 2.5 ... 4.0 A

Long Description:The MS132-4.0 manual motor starter (also known as motor protection circuit breaker or manual motor protector) is a compact 45 mm width device with a rated operational current of Ie = 4.00 A. This device is used to manually switch on and off motors and to protect them reliably and without the need for a fuse from short-circuits, overload and phase failures. The manual motor starter offers a rated service short-circuit breaking capacity Ics = 100 kA at 400 VAC and trip class 10. Further features are the build-in disconnect function, temperature compensation, trip-free mechanism and a rotary handle with a clear switch position indication. The manual motor starter is suitable for three- and single-phase applications. The handle is lockable to protect against unauthorized changes. Auxiliary contacts, signaling contacts, undervoltage releases, shunt trips, 3-phase bus bars, power in-feed blocks and terminal spacers are available as accessory.

Rated Service Short-Circuit Breaking Capacity (Ics):(230 V AC) 100 kA

Rated Ultimate Short-Circuit Breaking Capacity (Icu):(230 V AC) 100 kA

Rated Instantaneous Short-Circuit Current Setting (Ii):50 A

Rated Operational Power AC-3 (Pe):(400 V) Three Phase 1.5 kW

Rated Operational Power AC-3e (Pe):(400 V) Three Phase 1.5 kW

Rated Operational Voltage:Main Circuit 690 V AC

Rated Impulse Withstand Voltage (Uimp):Main Circuit 6 kV

Power Loss:at Rated Operating Conditions per Pole 0.7 ... 1.8 W

Conventional Free-air Thermal Current (Ith):Main Circuit 4 A

Connecting Capacity Main Circuit:Flexible with Ferrule 1/2x 0.75 ... 2.5 mm²

Flexible with Insulated Ferrule 1/2x 0.75 ... 2.5 mm²

Tightening Torque:Main Circuit 0.8 ... 1.2 N·m

Minimum Mounting Distance:Electrical Conductive Board, Horizontal - Up to 400 V 0 mm

Electrical Conductive Board, Horizontal - Up to 690 V 1.5 mm

Electrical Conductive Board, Vertical 75 mm

Contact Position Indication:ON / OFF / TRIP

Remarks:UL508 Self-Protected Combination Motor Controller (Type E) in combination with feeder block S1-M3-xx

Short-Circuit Current Rating (SCCR):Manual Self-Protected Combination Controllers (Type E), (480Y / 277 V AC) 65 kA

Manual Self-Protected Combination Controllers (Type E), (600Y / 347 V AC) 47 kA

Any UL Listed Fuses or Circuit-Breakers, Group Installations (480 V AC) 65 kA

Any UL Listed Fuses or Circuit-Breakers, Group Installations (600 V AC) 47 kA

Any UL Listed Fuses or Circuit-Breakers, Motor Disconnect (480 V AC) 65 kA

Any UL Listed Fuses or Circuit-Breakers, Motor Disconnect (600 V AC) 47 kA

Any UL Listed Fuses or Circuit-Breakers, Tap Conductor Protection in Group Installations (480Y / 277 V AC) 65 kA

Any UL Listed Fuses or Circuit-Breakers, Tap Conductor Protection in Group Installations (600Y / 347 V AC) 47 kA

Maximum Operating Voltage UL/CSA:Main Circuit 600 V AC

Horsepower Rating UL/CSA:(200 V AC) Three Phase 0.75 Hp

Full Load Amps Motor Use:(200 V AC) Three Phase 4 A

Locked Rotor Amps:(200 V AC) Three Phase 24 A

Connecting Capacity Main Circuit UL/CSA:Flexible 1/2x 16-12 AWG

Tightening Torque UL/CSA:Main Circuit 10 ... 12 in·lb

<h3 class="md-block-header-three"><strong class="md-inline-bold">Abb MS132-4.0 Starter Motor Manual 4A</strong></h3><p class="md-block-unstyled">  </p><ul class="md-block-unordered-list-item"><li>Extended Product Type:MS132-4.0</li><li>Product ID:1SAM350000R1008</li><li>EAN:4013614400087</li><li>Catalog Description:MS132-4.0 Manual Motor Starter 2.5 ... 4.0 A</li><li>Long Description:The MS132-4.0 manual motor starter (also known as motor protection circuit breaker or manual motor protector) is a compact 45 mm width device with a rated operational current of Ie = 4.00 A. This device is used to manually switch on and off motors and to protect them reliably and without the need for a fuse from short-circuits, overload and phase failures. The manual motor starter offers a rated service short-circuit breaking capacity Ics = 100 kA at 400 VAC and trip class 10. Further features are the build-in disconnect function, temperature compensation, trip-free mechanism and a rotary handle with a clear switch position indication. The manual motor starter is suitable for three- and single-phase applications. The handle is lockable to protect against unauthorized changes. Auxiliary contacts, signaling contacts, undervoltage releases, shunt trips, 3-phase bus bars, power in-feed blocks and terminal spacers are available as accessory.</li><li>Unit of Measurement : PCS</li></ul><p class="md-block-unstyled"><strong class="md-inline-bold">Technical</strong></p><ul class="md-block-unordered-list-item"><li>Rated Service Short-Circuit Breaking Capacity (Ics):(230 V AC) 100 kA</li><li>(250 V DC) 3 Poles in Series 10 kA</li><li>(400 V AC) 100 kA</li><li>(440 V AC) 30 kA</li><li>(500 V AC) 20 kA</li><li>(690 V AC) 3 kA</li><li>Rated Ultimate Short-Circuit Breaking Capacity (Icu):(230 V AC) 100 kA</li><li>(400 V AC) 100 kA</li><li>(440 V AC) 30 kA</li><li>(500 V AC) 20 kA</li><li>(690 V AC) 3 kA</li><li>Rated Instantaneous Short-Circuit Current Setting (Ii):50 A</li><li>Setting Range:2.5 ... 4.0 A</li><li>Rated Operational Power AC-3 (Pe):(400 V) Three Phase 1.5 kW</li><li>Rated Operational Power AC-3e (Pe):(400 V) Three Phase 1.5 kW</li><li>Rated Operational Voltage:Main Circuit 690 V AC</li><li>Main Circuit 250 V DC</li><li>Rated Operational Current (Ie):4 A</li><li>Rated Operational Current AC-3 (Ie):4 A</li><li>Rated Operational Current AC-3e (Ie):4 A</li><li>Rated Operational Current DC-5 (Ie):4 A</li><li>Rated Frequency (f):Main Circuit 50 Hz</li><li>Main Circuit 60 Hz</li><li>Operating Frequency (fsw):0 ... 400 Hz</li><li>Rated Impulse Withstand Voltage (Uimp):Main Circuit 6 kV</li><li>Rated Insulation Voltage (Ui):690 V</li><li>Power Loss:at Rated Operating Conditions per Pole 0.7 ... 1.8 W</li><li>Number of Poles:3</li><li>Conventional Free-air Thermal Current (Ith):Main Circuit 4 A</li><li>Degree of Protection:Housing IP20</li><li>Main Circuit Terminals IP10</li><li>Pollution Degree:3</li><li>Electrical Durability:50000 cycle</li><li>Mechanical Durability:100000 cycle</li><li>Terminal Type:Screw Terminals</li><li>Connecting Capacity Main Circuit:Flexible with Ferrule 1/2x 0.75 ... 2.5 mm²</li><li>Flexible with Insulated Ferrule 1/2x 0.75 ... 2.5 mm²</li><li>Flexible 1/2x 0.75 ... 2.5 mm²</li><li>Rigid 1/2x 1 ... 4 mm²</li><li>Tightening Torque:Main Circuit 0.8 ... 1.2 N·m</li><li>Wire Stripping Length:Main Circuit 9 mm</li><li>Recommended Screw Driver:Pozidriv 2</li><li>Mounting Position:1 ... 6</li><li>Mounting on DIN Rail:TH35-15 (35 x 15 mm Mounting Rail) acc. to IEC 60715</li><li>TH35-7.5 (35 x 7.5 mm Mounting Rail) acc. to IEC 60715</li><li>Minimum Mounting Distance:Electrical Conductive Board, Horizontal - Up to 400 V 0 mm</li><li>Electrical Conductive Board, Horizontal - Up to 690 V 1.5 mm</li><li>Electrical Conductive Board, Vertical 75 mm</li><li>Other Device Same Type, Horizontal 0 mm</li><li>Other Device Same Type, Vertical 150 mm</li><li>Actuator Type:Rotary Handle</li><li>Contact Position Indication:ON / OFF / TRIP</li><li>Standards:IEC/EN 60947-1</li><li>IEC/EN 60947-2</li><li>IEC/EN 60947-4-1</li><li>UL 60947-1</li><li>UL 60947-4-1</li><li>Remarks:UL508 Self-Protected Combination Motor Controller (Type E) in combination with feeder block S1-M3-xx</li><li>Technical UL/CSA</li><li>Short-Circuit Current Rating (SCCR):Manual Self-Protected Combination Controllers (Type E), (480Y / 277 V AC) 65 kA</li><li>Manual Self-Protected Combination Controllers (Type E), (600Y / 347 V AC) 47 kA</li><li>Any UL Listed Fuses or Circuit-Breakers, Group Installations (480 V AC) 65 kA</li><li>Any UL Listed Fuses or Circuit-Breakers, Group Installations (600 V AC) 47 kA</li><li>Any UL Listed Fuses or Circuit-Breakers, Motor Disconnect (480 V AC) 65 kA</li><li>Any UL Listed Fuses or Circuit-Breakers, Motor Disconnect (600 V AC) 47 kA</li><li>Any UL Listed Fuses or Circuit-Breakers, Tap Conductor Protection in Group Installations (480Y / 277 V AC) 65 kA</li><li>Any UL Listed Fuses or Circuit-Breakers, Tap Conductor Protection in Group Installations (600Y / 347 V AC) 47 kA</li><li>Maximum Operating Voltage UL/CSA:Main Circuit 600 V AC</li><li>Horsepower Rating UL/CSA:(200 V AC) Three Phase 0.75 Hp</li><li>(208 V AC) Three Phase 0.75 Hp</li><li>(220 ... 240 V AC) Three Phase 1 Hp</li><li>(440 ... 480 V AC) Three Phase 2 Hp</li><li>(550 ... 600 V AC) Three Phase 3 Hp</li><li>Full Load Amps Motor Use:(200 V AC) Three Phase 4 A</li><li>(208 V AC) Three Phase 4 A</li><li>(220 ... 240 V AC) Three Phase 4 A</li><li>(440 ... 480 V AC) Three Phase 4 A</li><li>(550 ... 600 V AC) Three Phase 3.9 A</li><li>Locked Rotor Amps:(200 V AC) Three Phase 24 A</li><li>(208 V AC) Three Phase 24 A</li><li>(220 ... 240 V AC) Three Phase 24 A</li><li>(440 ... 480 V AC) Three Phase 24 A</li><li>(550 ... 600 V AC) Three Phase 25.6 A</li><li>General Use Rating UL/CSA:(600 V AC) 4 A</li><li>Connecting Capacity Main Circuit UL/CSA:Flexible 1/2x 16-12 AWG</li><li>Stranded 1/2x 16-12 AWG</li><li>Tightening Torque UL/CSA:Main Circuit 10 ... 12 in·lb</li></ul>

<h3><strong>Abb MS132-4.0 Starter Motor Manual 4A</strong></h3>
<p>&nbsp;&nbsp;</p>
<ul>
<li>Extended Product Type:MS132-4.0</li>
<li>Product ID:1SAM350000R1008</li>
<li>EAN:4013614400087</li>
<li>Catalog Description:MS132-4.0 Manual Motor Starter 2.5 ... 4.0 A</li>
<li>Long Description:The MS132-4.0 manual motor starter (also known as motor protection circuit breaker or manual motor protector) is a compact 45 mm width device with a rated operational current of Ie = 4.00 A. This device is used to manually switch on and off motors and to protect them reliably and without the need for a fuse from short-circuits, overload and phase failures. The manual motor starter offers a rated service short-circuit breaking capacity Ics = 100 kA at 400 VAC and trip class 10. Further features are the build-in disconnect function, temperature compensation, trip-free mechanism and a rotary handle with a clear switch position indication. The manual motor starter is suitable for three- and single-phase applications. The handle is lockable to protect against unauthorized changes. Auxiliary contacts, signaling contacts, undervoltage releases, shunt trips, 3-phase bus bars, power in-feed blocks and terminal spacers are available as accessory.</li>
<li>Unit of Measurement : PCS</li>
</ul>
<p><strong>Technical</strong></p>
<ul>
<li>Rated Service Short-Circuit Breaking Capacity (Ics):(230 V AC) 100 kA</li>
<li>(250 V DC) 3 Poles in Series 10 kA</li>
<li>(400 V AC) 100 kA</li>
<li>(440 V AC) 30 kA</li>
<li>(500 V AC) 20 kA</li>
<li>(690 V AC) 3 kA</li>
<li>Rated Ultimate Short-Circuit Breaking Capacity (Icu):(230 V AC) 100 kA</li>
<li>(400 V AC) 100 kA</li>
<li>(440 V AC) 30 kA</li>
<li>(500 V AC) 20 kA</li>
<li>(690 V AC) 3 kA</li>
<li>Rated Instantaneous Short-Circuit Current Setting (Ii):50 A</li>
<li>Setting Range:2.5 ... 4.0 A</li>
<li>Rated Operational Power AC-3 (Pe):(400 V) Three Phase 1.5 kW</li>
<li>Rated Operational Power AC-3e (Pe):(400 V) Three Phase 1.5 kW</li>
<li>Rated Operational Voltage:Main Circuit 690 V AC</li>
<li>Main Circuit 250 V DC</li>
<li>Rated Operational Current (Ie):4 A</li>
<li>Rated Operational Current AC-3 (Ie):4 A</li>
<li>Rated Operational Current AC-3e (Ie):4 A</li>
<li>Rated Operational Current DC-5 (Ie):4 A</li>
<li>Rated Frequency (f):Main Circuit 50 Hz</li>
<li>Main Circuit 60 Hz</li>
<li>Operating Frequency (fsw):0 ... 400 Hz</li>
<li>Rated Impulse Withstand Voltage (Uimp):Main Circuit 6 kV</li>
<li>Rated Insulation Voltage (Ui):690 V</li>
<li>Power Loss:at Rated Operating Conditions per Pole 0.7 ... 1.8 W</li>
<li>Number of Poles:3</li>
<li>Conventional Free-air Thermal Current (Ith):Main Circuit 4 A</li>
<li>Degree of Protection:Housing IP20</li>
<li>Main Circuit Terminals IP10</li>
<li>Pollution Degree:3</li>
<li>Electrical Durability:50000 cycle</li>
<li>Mechanical Durability:100000 cycle</li>
<li>Terminal Type:Screw Terminals</li>
<li>Connecting Capacity Main Circuit:Flexible with Ferrule 1/2x 0.75 ... 2.5 mm²</li>
<li>Flexible with Insulated Ferrule 1/2x 0.75 ... 2.5 mm²</li>
<li>Flexible 1/2x 0.75 ... 2.5 mm²</li>
<li>Rigid 1/2x 1 ... 4 mm²</li>
<li>Tightening Torque:Main Circuit 0.8 ... 1.2 N·m</li>
<li>Wire Stripping Length:Main Circuit 9 mm</li>
<li>Recommended Screw Driver:Pozidriv 2</li>
<li>Mounting Position:1 ... 6</li>
<li>Mounting on DIN Rail:TH35-15 (35 x 15 mm Mounting Rail) acc. to IEC 60715</li>
<li>TH35-7.5 (35 x 7.5 mm Mounting Rail) acc. to IEC 60715</li>
<li>Minimum Mounting Distance:Electrical Conductive Board, Horizontal - Up to 400 V 0 mm</li>
<li>Electrical Conductive Board, Horizontal - Up to 690 V 1.5 mm</li>
<li>Electrical Conductive Board, Vertical 75 mm</li>
<li>Other Device Same Type, Horizontal 0 mm</li>
<li>Other Device Same Type, Vertical 150 mm</li>
<li>Actuator Type:Rotary Handle</li>
<li>Contact Position Indication:ON / OFF / TRIP</li>
<li>Standards:IEC/EN 60947-1</li>
<li>IEC/EN 60947-2</li>
<li>IEC/EN 60947-4-1</li>
<li>UL 60947-1</li>
<li>UL 60947-4-1</li>
<li>Remarks:UL508 Self-Protected Combination Motor Controller (Type E) in combination with feeder block S1-M3-xx</li>
<li>Technical UL/CSA</li>
<li>Short-Circuit Current Rating (SCCR):Manual Self-Protected Combination Controllers (Type E), (480Y / 277 V AC) 65 kA</li>
<li>Manual Self-Protected Combination Controllers (Type E), (600Y / 347 V AC) 47 kA</li>
<li>Any UL Listed Fuses or Circuit-Breakers, Group Installations (480 V AC) 65 kA</li>
<li>Any UL Listed Fuses or Circuit-Breakers, Group Installations (600 V AC) 47 kA</li>
<li>Any UL Listed Fuses or Circuit-Breakers, Motor Disconnect (480 V AC) 65 kA</li>
<li>Any UL Listed Fuses or Circuit-Breakers, Motor Disconnect (600 V AC) 47 kA</li>
<li>Any UL Listed Fuses or Circuit-Breakers, Tap Conductor Protection in Group Installations (480Y / 277 V AC) 65 kA</li>
<li>Any UL Listed Fuses or Circuit-Breakers, Tap Conductor Protection in Group Installations (600Y / 347 V AC) 47 kA</li>
<li>Maximum Operating Voltage UL/CSA:Main Circuit 600 V AC</li>
<li>Horsepower Rating UL/CSA:(200 V AC) Three Phase 0.75 Hp</li>
<li>(208 V AC) Three Phase 0.75 Hp</li>
<li>(220 ... 240 V AC) Three Phase 1 Hp</li>
<li>(440 ... 480 V AC) Three Phase 2 Hp</li>
<li>(550 ... 600 V AC) Three Phase 3 Hp</li>
<li>Full Load Amps Motor Use:(200 V AC) Three Phase 4 A</li>
<li>(208 V AC) Three Phase 4 A</li>
<li>(220 ... 240 V AC) Three Phase 4 A</li>
<li>(440 ... 480 V AC) Three Phase 4 A</li>
<li>(550 ... 600 V AC) Three Phase 3.9 A</li>
<li>Locked Rotor Amps:(200 V AC) Three Phase 24 A</li>
<li>(208 V AC) Three Phase 24 A</li>
<li>(220 ... 240 V AC) Three Phase 24 A</li>
<li>(440 ... 480 V AC) Three Phase 24 A</li>
<li>(550 ... 600 V AC) Three Phase 25.6 A</li>
<li>General Use Rating UL/CSA:(600 V AC) 4 A</li>
<li>Connecting Capacity Main Circuit UL/CSA:Flexible 1/2x 16-12 AWG</li>
<li>Stranded 1/2x 16-12 AWG</li>
<li>Tightening Torque UL/CSA:Main Circuit 10 ... 12 in·lb</li>
</ul>


Abb MS132-4.0 Starter Motor Manual 4A

abb ms132-4.0 starter motor manual 4a panduan pemula penghidup ms132-4.0起动电机手册4a

abb-ms132-4-0-starter-motor-manual-4a

Schneider Electric LADR0 Time Delay Auxiliary Contact Block, Tesys Deca, 1NO+1NC, Off Delay 0.3-3s, Front, Screw Clamp Terminals

 
TeSys Deca time delay auxiliary contact block, for contactors LC1D, LC1F and control relays CAD. It provides 1NO+1NC contacts rated up to 10A 690V AC, Off-delay setting range 0.3-3s, connection by screw clamp terminals. Clip-on front mounting, it procures high reliability and durability. Multi standards certified (IEC, UL, CSA, CCC, EAC), Green Premium compliant (RoHs/Reach). 

Product or component type: Time delay auxiliary contact block

[Ue] rated operational voltage: 690 V AC 25...400 Hz

600 V conforming to CSA C22.2 No 60947-5-1

[Ith] conventional free air thermal current: 10 A (at 60 °C)

1.5 ms on de-energisation no overlap between NC and NO contact

1.5 ms on energisation no overlap between NC and NO contact

 Screw clamp terminals 1 cable(s) 1…2.5 mm²flexible with cable end

Screw clamp terminals 1 cable(s) 1…2.5 mm²flexible without cable end

Screw clamp terminals 2 cable(s) 1…2.5 mm²flexible with cable end

Screw clamp terminals 2 cable(s) 1…2.5 mm²flexible without cable end

Screw clamp terminals 1 cable(s) 1…2.5 mm²rigid

Screw clamp terminals 2 cable(s) 1…2.5 mm²rigid

Environmental characteristic: Normal environment

IP degree of protection: IP20 conforming to IEC 60529

Protective treatment: TH conforming to IEC 60068

<h3 class="md-block-header-three"><strong class="md-inline-bold">Schneider Electric LADR0 Time Delay Auxiliary Contact Block, Tesys Deca, 1NO+1NC, Off Delay 0.3-3s, Front, Screw Clamp Terminals</strong></h3><p class="md-block-unstyled"> <br/>TeSys Deca time delay auxiliary contact block, for contactors LC1D, LC1F and control relays CAD. It provides 1NO+1NC contacts rated up to 10A 690V AC, Off-delay setting range 0.3-3s, connection by screw clamp terminals. Clip-on front mounting, it procures high reliability and durability. Multi standards certified (IEC, UL, CSA, CCC, EAC), Green Premium compliant (RoHs/Reach). </p><p class="md-block-unstyled"><strong class="md-inline-bold">Main</strong></p><ul class="md-block-unordered-list-item"><li>Range:<strong class="md-inline-bold"> </strong> TeSys, TeSys Deca </li><li>Product name: TeSys Deca</li><li>Product or component type: Time delay auxiliary contact block</li><li>Range compatibility:</li><ul class="md-block-unordered-list-item"><li>TeSys Deca CAD</li><li>TeSys Deca LC1D</li><li>TeSys F LC1F</li><li>TeSys F CR1F</li></ul><li>Mounting location: Front</li><li>Pole contact composition: 1 NO + 1 NC</li><li>Contacts operation: Time delay</li><li>Timer type: Off delay</li><li>Time delay range: 0.3...3 s</li><li>[Ue] rated operational voltage: 690 V AC 25...400 Hz</li><li>[Ie] rated operational current:</li><ul class="md-block-unordered-list-item"><li>6 A at 120 V AC-15</li><li>1.04 A at 690 V AC-15</li><li>0.55 A at 125 V DC-13</li><li>0.1 A at 600 V DC-13</li></ul><li>[Ui] rated insulation voltage:</li><ul class="md-block-unordered-list-item"><li>690 V conforming to IEC 60947-5-1</li><li>600 V conforming to UL 60947-5-1</li><li>600 V conforming to CSA C22.2 No 60947-5-1</li></ul><li>[Ith] conventional free air thermal current: 10 A (at 60 °C)</li><li>Standards:</li><ul class="md-block-unordered-list-item"><li>EN/IEC 60947-5-1</li><li>UL 60947-5-1</li><li>CSA C22.2 No 60947-5-1</li><li>GB/T 14048.5</li><li>EN 50012</li></ul><li>Product certifications:</li><ul class="md-block-unordered-list-item"><li>IECEE CB Scheme</li><li>UL</li><li>CSA</li><li>CCC</li><li>EAC</li><li>UKCA</li></ul></ul><p class="md-block-unstyled"><strong class="md-inline-bold">Complementary</strong></p><ul class="md-block-unordered-list-item"><li>Irms rated making capacity:</li><ul class="md-block-unordered-list-item"><li>140 A AC conforming to IEC 60947-5-1</li><li>250 A DC conforming to IEC 60947-5-1</li></ul><li>Permissible short-time rating:</li><ul class="md-block-unordered-list-item"><li>100 A 60 °C 1 s</li><li>120 A 60 °C 500 ms</li><li>140 A 60 °C 100 ms</li></ul><li>Protection type: GG fuse 10 A</li><li>Mechanical durability: 5 Mcycles</li><li>Minimum switching current: 5 mA</li><li>Minimum switching voltage: 17 V</li><li>Non-overlap time:</li><ul class="md-block-unordered-list-item"><li>1.5 ms on de-energisation no overlap between NC and NO contact</li><li>1.5 ms on energisation no overlap between NC and NO contact</li></ul><li>Insulation resistance: &gt; 10 MOhm</li><li>Connections - Terminals</li><ul class="md-block-unordered-list-item"><li> Screw clamp terminals 1 cable(s) 1…2.5 mm²flexible with cable end</li><li>Screw clamp terminals 1 cable(s) 1…2.5 mm²flexible without cable end</li><li>Screw clamp terminals 2 cable(s) 1…2.5 mm²flexible with cable end</li><li>Screw clamp terminals 2 cable(s) 1…2.5 mm²flexible without cable end</li><li>Screw clamp terminals 1 cable(s) 1…2.5 mm²rigid</li><li>Screw clamp terminals 2 cable(s) 1…2.5 mm²rigid</li><li>Screw clamp terminals </li></ul><li>Tightening torque:</li><ul class="md-block-unordered-list-item"><li>1.7 N.m - with screwdriver flat Ø 6 mm</li><li>1.7 N.m - with screwdriver Philips No 2</li><li>1.7 N.m - with screwdriver pozidriv No 2</li></ul><li>Height: 48 mm</li><li>Width: 44 mm</li><li>Depth: 61 mm</li><li>Colour: Dark grey </li></ul><p class="md-block-unstyled"><strong class="md-inline-bold">Environmental</strong></p><ul class="md-block-unordered-list-item"><li>Environmental characteristic: Normal environment</li><li>IP degree of protection: IP20 conforming to IEC 60529</li><li>Protective treatment: TH conforming to IEC 60068</li><li>Ambient air temperature for storage: -60…80 °C</li><li>Ambient air temperature for operation: -40…70 °C</li><li>Operating altitude: 3000 m</li></ul>

<h3><strong>Schneider Electric LADR0 Time Delay Auxiliary Contact Block, Tesys Deca, 1NO+1NC, Off Delay 0.3-3s, Front, Screw Clamp Terminals</strong></h3>
<p>&nbsp;<br>
TeSys Deca time delay auxiliary contact block, for contactors LC1D, LC1F and control relays CAD. It provides 1NO+1NC contacts rated up to 10A 690V AC, Off-delay setting range 0.3-3s, connection by screw clamp terminals. Clip-on front mounting, it procures high reliability and durability. Multi standards certified (IEC, UL, CSA, CCC, EAC), Green Premium compliant (RoHs/Reach).&nbsp;</p>
<p><strong>Main</strong></p>
<ul>
<li>Range:<strong> </strong> TeSys, TeSys Deca&nbsp;</li>
<li>Product name: TeSys Deca</li>
<li>Product or component type: Time delay auxiliary contact block</li>
<li>Range compatibility:</li>
<ul>
<li>TeSys Deca CAD</li>
<li>TeSys Deca LC1D</li>
<li>TeSys F LC1F</li>
<li>TeSys F CR1F</li>
</ul>
<li>Mounting location: Front</li>
<li>Pole contact composition: 1 NO + 1 NC</li>
<li>Contacts operation: Time delay</li>
<li>Timer type: Off delay</li>
<li>Time delay range: 0.3...3 s</li>
<li>[Ue] rated operational voltage: 690 V AC 25...400 Hz</li>
<li>[Ie] rated operational current:</li>
<ul>
<li>6 A at 120 V AC-15</li>
<li>1.04 A at 690 V AC-15</li>
<li>0.55 A at 125 V DC-13</li>
<li>0.1 A at 600 V DC-13</li>
</ul>
<li>[Ui] rated insulation voltage:</li>
<ul>
<li>690 V conforming to IEC 60947-5-1</li>
<li>600 V conforming to UL 60947-5-1</li>
<li>600 V conforming to CSA C22.2 No 60947-5-1</li>
</ul>
<li>[Ith] conventional free air thermal current: 10 A (at 60 °C)</li>
<li>Standards:</li>
<ul>
<li>EN/IEC 60947-5-1</li>
<li>UL 60947-5-1</li>
<li>CSA C22.2 No 60947-5-1</li>
<li>GB/T 14048.5</li>
<li>EN 50012</li>
</ul>
<li>Product certifications:</li>
<ul>
<li>IECEE CB Scheme</li>
<li>UL</li>
<li>CSA</li>
<li>CCC</li>
<li>EAC</li>
<li>UKCA</li>
</ul>
</ul>
<p><strong>Complementary</strong></p>
<ul>
<li>Irms rated making capacity:</li>
<ul>
<li>140 A AC conforming to IEC 60947-5-1</li>
<li>250 A DC conforming to IEC 60947-5-1</li>
</ul>
<li>Permissible short-time rating:</li>
<ul>
<li>100 A 60 °C 1 s</li>
<li>120 A 60 °C 500 ms</li>
<li>140 A 60 °C 100 ms</li>
</ul>
<li>Protection type: GG fuse 10 A</li>
<li>Mechanical durability: 5 Mcycles</li>
<li>Minimum switching current: 5 mA</li>
<li>Minimum switching voltage: 17 V</li>
<li>Non-overlap time:</li>
<ul>
<li>1.5 ms on de-energisation no overlap between NC and NO contact</li>
<li>1.5 ms on energisation no overlap between NC and NO contact</li>
</ul>
<li>Insulation resistance: &gt; 10 MOhm</li>
<li>Connections - Terminals</li>
<ul>
<li>&nbsp;Screw clamp terminals 1 cable(s) 1…2.5 mm²flexible with cable end</li>
<li>Screw clamp terminals 1 cable(s) 1…2.5 mm²flexible without cable end</li>
<li>Screw clamp terminals 2 cable(s) 1…2.5 mm²flexible with cable end</li>
<li>Screw clamp terminals 2 cable(s) 1…2.5 mm²flexible without cable end</li>
<li>Screw clamp terminals 1 cable(s) 1…2.5 mm²rigid</li>
<li>Screw clamp terminals 2 cable(s) 1…2.5 mm²rigid</li>
<li>Screw clamp terminals&nbsp;</li>
</ul>
<li>Tightening torque:</li>
<ul>
<li>1.7 N.m - with screwdriver flat Ø 6 mm</li>
<li>1.7 N.m - with screwdriver Philips No 2</li>
<li>1.7 N.m - with screwdriver pozidriv No 2</li>
</ul>
<li>Height: 48 mm</li>
<li>Width: 44 mm</li>
<li>Depth: 61 mm</li>
<li>Colour: Dark grey&nbsp;</li>
</ul>
<p><strong>Environmental</strong></p>
<ul>
<li>Environmental characteristic: Normal environment</li>
<li>IP degree of protection: IP20 conforming to IEC 60529</li>
<li>Protective treatment: TH conforming to IEC 60068</li>
<li>Ambient air temperature for storage: -60…80 °C</li>
<li>Ambient air temperature for operation: -40…70 °C</li>
<li>Operating altitude: 3000 m</li>
</ul>


schneider electric ladr0 time delay auxiliary contact block, tesys deca, 1no+1nc, 0.3-3s, front, screw clamp terminals blok kontak tambahan delay, depan, terminal penjepit sekrup block pengapit skru electric/施耐德电气 时间延迟辅助触点块，tesys deca，1no+1nc，断开延迟 0.3-3 秒，正面，螺丝夹端子 施耐德电气