Murr Elektronik

RS Pro

IT & Electronics

it-electronics

Ethernet Cable

ethernet-cable

Mechanical Parts

mechanical-parts

Oil Seals

oil-seals

Ribbon Cables 

ribbon-cables

Dimensional Drawing

Cable Selection Guide

RS PRO Datasheet

Siemens

STANLEY

SCHNEIDER ELECTRIC

ECLIPSE TOOLS

Facom

RAPID

PEGLER YORKSHIRE

KARCHER

Screw

O Ring

Plugs & Connector 

Surface Mount Resistors

Bolts

Panel Mount Indicators 

Button Switch

Electrical Wire 

Aluminium Capacitors

Air Filters

RS Components ETH SG

buyerIntroduction

Rs Pro 360122 1.27mm 20 Way Flat Ribbon Cable, Grey Sheath, 25.4 Mm Width, 30m Length (1 Box of 30 Metres)

rs pro 360122 1.27mm 20 way flat ribbon cable, grey sheath, 25.4 mm width, 30m length (1 box 30 metres) kabel pita datar 1,27mm arah, selubung abu-abu, lebar 25,4 mm, panjang kotak meter) cables reben rata hala, sarung kelabu, pro/rs专业版 路扁平带状电缆，灰色护套，25.4 宽，30m 长（1 米） rs专业版

rs-pro-360122-1-27mm-20-way-flat-ribbon-cable-grey-sheath-25-4-mm-width-30m-length-1-box-of-30-metres

Murr 7000-08041-6300500 M8 Female 0° A-cod. With Cable Pur 3x0.25 Bk UL/CSA+drag Ch. 5m 

Suitable for corrugated tube (internal Ø): 6.5 mm

Degree of protection (EN IEC 60529): IP65, IP66K, IP67

Additional condition protection degree: Inserted, screwed

Material screw connection: Zinc die-casting

Mounting method: Inserted, screwed, Shaking protection

Additional condition temperature range: Depending on cable quality

Note on strain relief: Protect the connectors from mechanical loads by using cable ties.

Note on bending radius: Observe permissible bending radii to prevent damage to IP protection class.

Product standard: DIN EN 61076-2-104 (M8)

Freedom from ingredients (jacket): Lead-free, cadmium-free, CFC-free, halogen-free, silicone-free

Tolerance outer diameter (sheath): ± 5 %

Outer diameter tolerance core insulation: ± 5 %

Shore hardness wire insulation: 70 ± 5 Shore D

Ingredient freeness wire insulation: Lead-free, cadmium-free, CFC-free, halogen-free, silicone-free

Conductor cross-section (wire): 0.25 mm²

Material conductor wire: Stranded copper wire, bare

Current load capacity (standard): To DIN VDE 0298-4

Electrical resistance line constant wire: 79 Ω/km @ 20 °C

AC withstand voltage (wire - wire): 2.5 kV @ 60 s

Power frequency withstand voltage (wire - jacket): 2.5 kV @ 60 s

Min. operating temperature (static): -40 °C

Max. operating temperature (fixed): 80 °C / 90 °C @ 10,000 h operation

Operating temperature min. (dynamic): -25 °C

Operating temperature max. (dynamic): 80 °C / 90 °C @ 10,000 h operation

Chemical resistance: Good, application-related testing

Gasoline resistance: Good, application-related testing

<h3 class="md-block-header-three">Murr 7000-08041-6300500 M8 Female 0° A-cod. With Cable Pur 3x0.25 Bk UL/CSA+drag Ch. 5m </h3><h3 class="md-block-header-three">Cable Details</h3><ul class="md-block-unordered-list-item"><li>Cable length: 5 m</li></ul><h3 class="md-block-header-three">Side 1</h3><ul class="md-block-unordered-list-item"><li>Tightening torque: 0.4 Nm</li><li>Mounting method: Inserted, screwed</li><li>Coating contact: Gold plated</li><li>Family construction form: M8</li><li>Thread: M8 x 1</li><li>Suitable for corrugated tube (internal Ø): 6.5 mm</li><li>Cable outlet: Straight</li><li>Coding: A</li><li>Material contact: Copper alloy</li><li>Material: PUR</li><li>No. of poles: 3</li><li>Width across flats: SW9</li><li>Degree of protection (EN IEC 60529): IP65, IP66K, IP67</li></ul><h3 class="md-block-header-three">Side 2</h3><ul class="md-block-unordered-list-item"><li>Stripping length (jacket): 20 mm</li><li>Family construction form: Free cable end</li></ul><h3 class="md-block-header-three">Electrical Data | Supply</h3><ul class="md-block-unordered-list-item"><li>Operating voltage AC max.: 50 V</li><li>Operating voltage DC max.: 60 V</li><li>Operating voltage AC (UL-listed): 30 V</li><li>Operating voltage DC (UL-listed): 30 V</li><li>Current operating per contact max.: 4 A</li></ul><h3 class="md-block-header-three">Diagnostics</h3><ul class="md-block-unordered-list-item"><li>Status indication LED: No</li></ul><h3 class="md-block-header-three">Installation | Connection</h3><ul class="md-block-unordered-list-item"><li>Stripping length (jacket): 20 mm</li><li>Mounting set: M8 x 1</li></ul><h3 class="md-block-header-three">Device Protection | Electrical</h3><ul class="md-block-unordered-list-item"><li>Additional condition protection degree: Inserted, screwed</li><li>Pollution Degree: 3</li><li>Rated surge voltage: 1.5 kV</li><li>Material group (IEC 60664-1): I</li></ul><h3 class="md-block-header-three">Mechanical Data | Material Data</h3><ul class="md-block-unordered-list-item"><li>Coating locking: Nickeled</li><li>Coating of fitting: Nickel plated</li><li>Material gasket: FKM</li><li>Locking material: Zinc die-casting</li><li>Material screw connection: Zinc die-casting</li></ul><h3 class="md-block-header-three">Mechanical Data | Mounting Data</h3><ul class="md-block-unordered-list-item"><li>Mounting method: Inserted, screwed, Shaking protection</li></ul><h3 class="md-block-header-three">Environmental Characteristics | Climatic</h3><ul class="md-block-unordered-list-item"><li>Operating temperature min.: -25 °C</li><li>Operating temperature max.: 85 °C</li><li>Additional condition temperature range: Depending on cable quality</li></ul><h3 class="md-block-header-three">Important Installation Notes</h3><ul class="md-block-unordered-list-item"><li>Note on strain relief: Protect the connectors from mechanical loads by using cable ties.</li><li>Note on bending radius: Observe permissible bending radii to prevent damage to IP protection class.</li></ul><h3 class="md-block-header-three">Conformity</h3><ul class="md-block-unordered-list-item"><li>Product standard: DIN EN 61076-2-104 (M8)</li></ul><h3 class="md-block-header-three">Cable Specifications</h3><ul class="md-block-unordered-list-item"><li>Cable identification: 630</li><li>Cable Type: 3</li><li>Jacket Color: Black</li><li>Type of Certificate: cURus</li></ul><h3 class="md-block-header-three">Structure | Cable</h3><ul class="md-block-unordered-list-item"><li>Amount stranding: 1</li><li>Stranding: 3 wires twisted</li><li>Wire arrangement: Brown, black, blue</li></ul><h3 class="md-block-header-three">Mechanical Data | Cable</h3><ul class="md-block-unordered-list-item"><li>Cable weight: 26.4 g/m</li><li>Material jacket: PUR</li><li>Shore hardness jacket: 90 ± 5 Shore A</li><li>Freedom from ingredients (jacket): Lead-free, cadmium-free, CFC-free, halogen-free, silicone-free</li><li>Outer diameter (jacket): 4.1 mm</li><li>Tolerance outer diameter (sheath): ± 5 %</li><li>Material wire insulation: PP</li><li>Amount wires: 3</li><li>Outer diameter insulation: 1.25 mm</li><li>Outer diameter tolerance core insulation: ± 5 %</li><li>Shore hardness wire insulation: 70 ± 5 Shore D</li><li>Ingredient freeness wire insulation: Lead-free, cadmium-free, CFC-free, halogen-free, silicone-free</li><li>Amount strands (wire): 32</li><li>Diameter of single wires: 0.1 mm</li><li>Conductor cross-section (wire): 0.25 mm²</li><li>Material conductor wire: Stranded copper wire, bare</li><li>Conductor type (wire): Strand class 6</li></ul><h3 class="md-block-header-three">Electrical Data | Cable</h3><ul class="md-block-unordered-list-item"><li>Nominal voltage AC max.: 300 V</li><li>Current load capacity (standard): To DIN VDE 0298-4</li><li>Current load capacity min. wire: 4.5 A</li><li>Electrical resistance line constant wire: 79 Ω/km @ 20 °C</li><li>AC withstand voltage (wire - wire): 2.5 kV @ 60 s</li><li>Power frequency withstand voltage (wire - jacket): 2.5 kV @ 60 s</li></ul><h3 class="md-block-header-three">Temperature Range | Cable</h3><ul class="md-block-unordered-list-item"><li>Min. operating temperature (static): -40 °C</li><li>Max. operating temperature (fixed): 80 °C / 90 °C @ 10,000 h operation</li><li>Operating temperature min. (dynamic): -25 °C</li><li>Operating temperature max. (dynamic): 80 °C / 90 °C @ 10,000 h operation</li></ul><h3 class="md-block-header-three">Resistances | Cable</h3><ul class="md-block-unordered-list-item"><li>UV resistance: DIN EN ISO 4892-2 A</li><li>Flame resistance:</li><ul class="md-block-unordered-list-item"><li>UL 1581 § 1090</li><li>UL 1581 § 1100 FT2</li><li>IEC 60332-2-2</li></ul><li>Chemical resistance: Good, application-related testing</li><li>Gasoline resistance: Good, application-related testing</li><li>Oil resistance: Good, application-related testing | DIN EN 60811-404</li></ul><h3 class="md-block-header-three">Installation | Cable</h3><ul class="md-block-unordered-list-item"><li>Bending radius (fixed): 5 x Outer diameter</li><li>Bending radius (dynamic): 10 x Outer diameter</li><li>No. of bending cycles (C-track): 10 million @ 25 °C</li><li>Traversing distance (C-track): 10 m @ 25 °C | Horizontal</li><li>Travel speed (C-track): 3 m/s @ 25 °C</li><li>No. of torsion cycles: 2 million</li><li>Torsion stress: ± 180 °/m</li><li>Torsion speed: 35 cycles/min</li></ul>

<h3>Murr 7000-08041-6300500 M8 Female 0° A-cod. With Cable Pur 3x0.25 Bk UL/CSA+drag Ch. 5m&nbsp;</h3>
<h3>Cable Details</h3>
<ul>
<li>Cable length: 5 m</li>
</ul>
<h3>Side 1</h3>
<ul>
<li>Tightening torque: 0.4 Nm</li>
<li>Mounting method: Inserted, screwed</li>
<li>Coating contact: Gold plated</li>
<li>Family construction form: M8</li>
<li>Thread: M8 x 1</li>
<li>Suitable for corrugated tube (internal Ø): 6.5 mm</li>
<li>Cable outlet: Straight</li>
<li>Coding: A</li>
<li>Material contact: Copper alloy</li>
<li>Material: PUR</li>
<li>No. of poles: 3</li>
<li>Width across flats: SW9</li>
<li>Degree of protection (EN IEC 60529): IP65, IP66K, IP67</li>
</ul>
<h3>Side 2</h3>
<ul>
<li>Stripping length (jacket): 20 mm</li>
<li>Family construction form: Free cable end</li>
</ul>
<h3>Electrical Data | Supply</h3>
<ul>
<li>Operating voltage AC max.: 50 V</li>
<li>Operating voltage DC max.: 60 V</li>
<li>Operating voltage AC (UL-listed): 30 V</li>
<li>Operating voltage DC (UL-listed): 30 V</li>
<li>Current operating per contact max.: 4 A</li>
</ul>
<h3>Diagnostics</h3>
<ul>
<li>Status indication LED: No</li>
</ul>
<h3>Installation | Connection</h3>
<ul>
<li>Stripping length (jacket): 20 mm</li>
<li>Mounting set: M8 x 1</li>
</ul>
<h3>Device Protection | Electrical</h3>
<ul>
<li>Additional condition protection degree: Inserted, screwed</li>
<li>Pollution Degree: 3</li>
<li>Rated surge voltage: 1.5 kV</li>
<li>Material group (IEC 60664-1): I</li>
</ul>
<h3>Mechanical Data | Material Data</h3>
<ul>
<li>Coating locking: Nickeled</li>
<li>Coating of fitting: Nickel plated</li>
<li>Material gasket: FKM</li>
<li>Locking material: Zinc die-casting</li>
<li>Material screw connection: Zinc die-casting</li>
</ul>
<h3>Mechanical Data | Mounting Data</h3>
<ul>
<li>Mounting method: Inserted, screwed, Shaking protection</li>
</ul>
<h3>Environmental Characteristics | Climatic</h3>
<ul>
<li>Operating temperature min.: -25 °C</li>
<li>Operating temperature max.: 85 °C</li>
<li>Additional condition temperature range: Depending on cable quality</li>
</ul>
<h3>Important Installation Notes</h3>
<ul>
<li>Note on strain relief: Protect the connectors from mechanical loads by using cable ties.</li>
<li>Note on bending radius: Observe permissible bending radii to prevent damage to IP protection class.</li>
</ul>
<h3>Conformity</h3>
<ul>
<li>Product standard: DIN EN 61076-2-104 (M8)</li>
</ul>
<h3>Cable Specifications</h3>
<ul>
<li>Cable identification: 630</li>
<li>Cable Type: 3</li>
<li>Jacket Color: Black</li>
<li>Type of Certificate: cURus</li>
</ul>
<h3>Structure | Cable</h3>
<ul>
<li>Amount stranding: 1</li>
<li>Stranding: 3 wires twisted</li>
<li>Wire arrangement: Brown, black, blue</li>
</ul>
<h3>Mechanical Data | Cable</h3>
<ul>
<li>Cable weight: 26.4 g/m</li>
<li>Material jacket: PUR</li>
<li>Shore hardness jacket: 90 ± 5 Shore A</li>
<li>Freedom from ingredients (jacket): Lead-free, cadmium-free, CFC-free, halogen-free, silicone-free</li>
<li>Outer diameter (jacket): 4.1 mm</li>
<li>Tolerance outer diameter (sheath): ± 5 %</li>
<li>Material wire insulation: PP</li>
<li>Amount wires: 3</li>
<li>Outer diameter insulation: 1.25 mm</li>
<li>Outer diameter tolerance core insulation: ± 5 %</li>
<li>Shore hardness wire insulation: 70 ± 5 Shore D</li>
<li>Ingredient freeness wire insulation: Lead-free, cadmium-free, CFC-free, halogen-free, silicone-free</li>
<li>Amount strands (wire): 32</li>
<li>Diameter of single wires: 0.1 mm</li>
<li>Conductor cross-section (wire): 0.25 mm²</li>
<li>Material conductor wire: Stranded copper wire, bare</li>
<li>Conductor type (wire): Strand class 6</li>
</ul>
<h3>Electrical Data | Cable</h3>
<ul>
<li>Nominal voltage AC max.: 300 V</li>
<li>Current load capacity (standard): To DIN VDE 0298-4</li>
<li>Current load capacity min. wire: 4.5 A</li>
<li>Electrical resistance line constant wire: 79 Ω/km @ 20 °C</li>
<li>AC withstand voltage (wire - wire): 2.5 kV @ 60 s</li>
<li>Power frequency withstand voltage (wire - jacket): 2.5 kV @ 60 s</li>
</ul>
<h3>Temperature Range | Cable</h3>
<ul>
<li>Min. operating temperature (static): -40 °C</li>
<li>Max. operating temperature (fixed): 80 °C / 90 °C @ 10,000 h operation</li>
<li>Operating temperature min. (dynamic): -25 °C</li>
<li>Operating temperature max. (dynamic): 80 °C / 90 °C @ 10,000 h operation</li>
</ul>
<h3>Resistances | Cable</h3>
<ul>
<li>UV resistance: DIN EN ISO 4892-2 A</li>
<li>Flame resistance:</li>
<ul>
<li>UL 1581 § 1090</li>
<li>UL 1581 § 1100 FT2</li>
<li>IEC 60332-2-2</li>
</ul>
<li>Chemical resistance: Good, application-related testing</li>
<li>Gasoline resistance: Good, application-related testing</li>
<li>Oil resistance: Good, application-related testing | DIN EN 60811-404</li>
</ul>
<h3>Installation | Cable</h3>
<ul>
<li>Bending radius (fixed): 5 x Outer diameter</li>
<li>Bending radius (dynamic): 10 x Outer diameter</li>
<li>No. of bending cycles (C-track): 10 million @ 25 °C</li>
<li>Traversing distance (C-track): 10 m @ 25 °C | Horizontal</li>
<li>Travel speed (C-track): 3 m/s @ 25 °C</li>
<li>No. of torsion cycles: 2 million</li>
<li>Torsion stress: ± 180 °/m</li>
<li>Torsion speed: 35 cycles/min</li>
</ul>

Murr Asia-Pacific Pte. Ltd

Murr Elektronik 7000-08041-6300500 M8 Female 0° A-cod. With Cable Pur 3x0.25 Bk UL/CSA+drag Ch. 5m

murr elektronik 7000-08041-6300500 m8 female 0° a-cod. cable pur 3x0.25 bk ul/csa+drag ch. 5m dengan kabel ethernet elektronik/穆尔电子 母头 带电缆 以太网电缆 穆尔电子

murr-elektronik-7000-08041-6300500-m8-female-0-a-cod-with-cable-pur-3x0-25-bk-ul-csa-drag-ch-5m

Murr 7000-08041-6301000 M8 Female 0° A-cod. With Cable Pur 3x0.25 Bk UL/CSA+drag Ch. 10m 

Material gasket: FKM (Fluorocarbon rubber)

Mounting method: Inserted, screwed, shaking protection

Strain relief: Protect connectors from mechanical loads with cable ties.

Bending radius: Observe the permissible bending radii to maintain IP protection class. Excessive bending could compromise protection.

Material wire insulation: PP (Polypropylene)

Oil resistance: Good, application-related testing | DIN EN 60811-404

<h3 class="md-block-header-three">Murr 7000-08041-6301000 M8 Female 0° A-cod. With Cable Pur 3x0.25 Bk UL/CSA+drag Ch. 10m </h3><h3 class="md-block-header-three">Cable Details</h3><ul class="md-block-unordered-list-item"><li>Cable length: 10 m</li></ul><h3 class="md-block-header-three">Side 1 (Connector)</h3><ul class="md-block-unordered-list-item"><li>Tightening torque: 0.4 Nm</li><li>Mounting method: Inserted, screwed</li><li>Coating contact: Gold plated</li><li>Family construction form: M8</li><li>Thread: M8 x 1</li><li>Suitable for corrugated tube (internal Ø): 6.5 mm</li><li>Cable outlet: Straight</li><li>Coding: A</li><li>Material contact: Copper alloy</li><li>Material: PUR (Polyurethane)</li><li>No. of poles: 3</li><li>Width across flats: SW9</li><li>Degree of protection (EN IEC 60529): IP65, IP66K, IP67</li></ul><h3 class="md-block-header-three">Side 2 (Free Cable End)</h3><ul class="md-block-unordered-list-item"><li>Stripping length (jacket): 20 mm</li><li>Family construction form: Free cable end</li></ul><h3 class="md-block-header-three">Electrical Data | Supply</h3><ul class="md-block-unordered-list-item"><li>Operating voltage AC max.: 50 V</li><li>Operating voltage DC max.: 60 V</li><li>Current operating per contact max.: 4 A</li></ul><h3 class="md-block-header-three">Diagnostics</h3><ul class="md-block-unordered-list-item"><li>Status indication LED: No</li></ul><h3 class="md-block-header-three">Installation | Connection</h3><ul class="md-block-unordered-list-item"><li>Stripping length (jacket): 20 mm</li><li>Mounting set: M8 x 1</li></ul><h3 class="md-block-header-three">Device Protection | Electrical</h3><ul class="md-block-unordered-list-item"><li>Additional condition protection degree: Inserted, screwed</li><li>Pollution Degree: 3</li><li>Rated surge voltage: 1.5 kV</li><li>Material group (IEC 60664-1): I</li></ul><h3 class="md-block-header-three">Mechanical Data | Material Data</h3><ul class="md-block-unordered-list-item"><li>Coating locking: Nickeled</li><li>Coating of fitting: Nickel plated</li><li>Material gasket: FKM (Fluorocarbon rubber)</li><li>Locking material: Zinc die-casting</li><li>Material screw connection: Zinc die-casting</li></ul><h3 class="md-block-header-three">Mechanical Data | Mounting Data</h3><ul class="md-block-unordered-list-item"><li>Mounting method: Inserted, screwed, shaking protection</li></ul><h3 class="md-block-header-three">Environmental Characteristics | Climatic</h3><ul class="md-block-unordered-list-item"><li>Operating temperature min.: -30 °C</li><li>Operating temperature max.: 85 °C</li><li>Additional condition temperature range: Depending on cable quality</li></ul><h3 class="md-block-header-three">Important Installation Notes</h3><ul class="md-block-unordered-list-item"><li>Strain relief: Protect connectors from mechanical loads with cable ties.</li><li>Bending radius: Observe the permissible bending radii to maintain IP protection class. Excessive bending could compromise protection.</li></ul><h3 class="md-block-header-three">Conformity</h3><ul class="md-block-unordered-list-item"><li>Product standard: DIN EN 61076-2-104 (M8)</li></ul><h3 class="md-block-header-three">Cable Specifications</h3><ul class="md-block-unordered-list-item"><li>Cable identification: 630</li><li>Cable Type: 3</li><li>Jacket Color: Black</li><li>Type of Certificate: cURus</li></ul><h3 class="md-block-header-three">Cable Structure</h3><ul class="md-block-unordered-list-item"><li>Amount of stranding: 1</li><li>Stranding: 3 wires twisted</li><li>Wire arrangement: Brown, black, blue</li></ul><h3 class="md-block-header-three">Mechanical Data | Cable</h3><ul class="md-block-unordered-list-item"><li>Cable weight: 26.4 g/m</li><li>Material jacket: PUR</li><li>Shore hardness jacket: 90 ± 5 Shore A</li><li>Freedom from ingredients (jacket): Lead-free, cadmium-free, CFC-free, halogen-free, silicone-free</li><li>Outer diameter (jacket): 4.1 mm</li><li>Tolerance outer diameter (sheath): ± 5 %</li><li>Material wire insulation: PP (Polypropylene)</li><li>Amount wires: 3</li><li>Outer diameter insulation: 1.25 mm</li><li>Outer diameter tolerance core insulation: ± 5 %</li><li>Shore hardness wire insulation: 70 ± 5 Shore D</li><li>Ingredient freeness wire insulation: Lead-free, cadmium-free, CFC-free, halogen-free, silicone-free</li><li>Amount strands (wire): 32</li><li>Diameter of single wires: 0.1 mm</li><li>Conductor cross-section (wire): 0.25 mm²</li><li>Material conductor wire: Stranded copper wire, bare</li><li>Conductor type (wire): Strand class 6</li></ul><h3 class="md-block-header-three">Electrical Data | Cable</h3><ul class="md-block-unordered-list-item"><li>Nominal voltage AC max.: 300 V</li><li>Current load capacity (standard): To DIN VDE 0298-4</li><li>Current load capacity min. wire: 4.5 A</li><li>Electrical resistance line constant wire: 79 Ω/km @ 20 °C</li><li>AC withstand voltage (wire - wire): 2.5 kV @ 60 s</li><li>Power frequency withstand voltage (wire - jacket): 2.5 kV @ 60 s</li></ul><h3 class="md-block-header-three">Temperature Range | Cable</h3><ul class="md-block-unordered-list-item"><li>Min. operating temperature (static): -40 °C</li><li>Max. operating temperature (fixed): 80 °C / 90 °C @ 10,000 h operation</li><li>Operating temperature min. (dynamic): -25 °C</li><li>Operating temperature max. (dynamic): 80 °C / 90 °C @ 10,000 h operation</li></ul><h3 class="md-block-header-three">Resistances | Cable</h3><ul class="md-block-unordered-list-item"><li>UV resistance: DIN EN ISO 4892-2 A</li><li>Flame resistance:</li><ul class="md-block-unordered-list-item"><li>UL 1581 § 1090</li><li>UL 1581 § 1100 FT2</li><li>IEC 60332-2-2</li></ul><li>Chemical resistance: Good, application-related testing</li><li>Gasoline resistance: Good, application-related testing</li><li>Oil resistance: Good, application-related testing | DIN EN 60811-404</li></ul><h3 class="md-block-header-three">Installation | Cable</h3><ul class="md-block-unordered-list-item"><li>Bending radius (fixed): 5 x Outer diameter</li><li>Bending radius (dynamic): 10 x Outer diameter</li><li>No. of bending cycles (C-track): 10 million @ 25 °C</li><li>Traversing distance (C-track): 10 m @ 25 °C | Horizontal</li><li>Travel speed (C-track): 3 m/s @ 25 °C</li><li>No. of torsion cycles: 2 million</li><li>Torsion stress: ± 180 °/m</li><li>Torsion speed: 35 cycles/min</li></ul>

<h3>Murr 7000-08041-6301000 M8 Female 0° A-cod. With Cable Pur 3x0.25 Bk UL/CSA+drag Ch. 10m&nbsp;</h3>
<h3>Cable Details</h3>
<ul>
<li>Cable length: 10 m</li>
</ul>
<h3>Side 1 (Connector)</h3>
<ul>
<li>Tightening torque: 0.4 Nm</li>
<li>Mounting method: Inserted, screwed</li>
<li>Coating contact: Gold plated</li>
<li>Family construction form: M8</li>
<li>Thread: M8 x 1</li>
<li>Suitable for corrugated tube (internal Ø): 6.5 mm</li>
<li>Cable outlet: Straight</li>
<li>Coding: A</li>
<li>Material contact: Copper alloy</li>
<li>Material: PUR (Polyurethane)</li>
<li>No. of poles: 3</li>
<li>Width across flats: SW9</li>
<li>Degree of protection (EN IEC 60529): IP65, IP66K, IP67</li>
</ul>
<h3>Side 2 (Free Cable End)</h3>
<ul>
<li>Stripping length (jacket): 20 mm</li>
<li>Family construction form: Free cable end</li>
</ul>
<h3>Electrical Data | Supply</h3>
<ul>
<li>Operating voltage AC max.: 50 V</li>
<li>Operating voltage DC max.: 60 V</li>
<li>Current operating per contact max.: 4 A</li>
</ul>
<h3>Diagnostics</h3>
<ul>
<li>Status indication LED: No</li>
</ul>
<h3>Installation | Connection</h3>
<ul>
<li>Stripping length (jacket): 20 mm</li>
<li>Mounting set: M8 x 1</li>
</ul>
<h3>Device Protection | Electrical</h3>
<ul>
<li>Additional condition protection degree: Inserted, screwed</li>
<li>Pollution Degree: 3</li>
<li>Rated surge voltage: 1.5 kV</li>
<li>Material group (IEC 60664-1): I</li>
</ul>
<h3>Mechanical Data | Material Data</h3>
<ul>
<li>Coating locking: Nickeled</li>
<li>Coating of fitting: Nickel plated</li>
<li>Material gasket: FKM (Fluorocarbon rubber)</li>
<li>Locking material: Zinc die-casting</li>
<li>Material screw connection: Zinc die-casting</li>
</ul>
<h3>Mechanical Data | Mounting Data</h3>
<ul>
<li>Mounting method: Inserted, screwed, shaking protection</li>
</ul>
<h3>Environmental Characteristics | Climatic</h3>
<ul>
<li>Operating temperature min.: -30 °C</li>
<li>Operating temperature max.: 85 °C</li>
<li>Additional condition temperature range: Depending on cable quality</li>
</ul>
<h3>Important Installation Notes</h3>
<ul>
<li>Strain relief: Protect connectors from mechanical loads with cable ties.</li>
<li>Bending radius: Observe the permissible bending radii to maintain IP protection class. Excessive bending could compromise protection.</li>
</ul>
<h3>Conformity</h3>
<ul>
<li>Product standard: DIN EN 61076-2-104 (M8)</li>
</ul>
<h3>Cable Specifications</h3>
<ul>
<li>Cable identification: 630</li>
<li>Cable Type: 3</li>
<li>Jacket Color: Black</li>
<li>Type of Certificate: cURus</li>
</ul>
<h3>Cable Structure</h3>
<ul>
<li>Amount of stranding: 1</li>
<li>Stranding: 3 wires twisted</li>
<li>Wire arrangement: Brown, black, blue</li>
</ul>
<h3>Mechanical Data | Cable</h3>
<ul>
<li>Cable weight: 26.4 g/m</li>
<li>Material jacket: PUR</li>
<li>Shore hardness jacket: 90 ± 5 Shore A</li>
<li>Freedom from ingredients (jacket): Lead-free, cadmium-free, CFC-free, halogen-free, silicone-free</li>
<li>Outer diameter (jacket): 4.1 mm</li>
<li>Tolerance outer diameter (sheath): ± 5 %</li>
<li>Material wire insulation: PP (Polypropylene)</li>
<li>Amount wires: 3</li>
<li>Outer diameter insulation: 1.25 mm</li>
<li>Outer diameter tolerance core insulation: ± 5 %</li>
<li>Shore hardness wire insulation: 70 ± 5 Shore D</li>
<li>Ingredient freeness wire insulation: Lead-free, cadmium-free, CFC-free, halogen-free, silicone-free</li>
<li>Amount strands (wire): 32</li>
<li>Diameter of single wires: 0.1 mm</li>
<li>Conductor cross-section (wire): 0.25 mm²</li>
<li>Material conductor wire: Stranded copper wire, bare</li>
<li>Conductor type (wire): Strand class 6</li>
</ul>
<h3>Electrical Data | Cable</h3>
<ul>
<li>Nominal voltage AC max.: 300 V</li>
<li>Current load capacity (standard): To DIN VDE 0298-4</li>
<li>Current load capacity min. wire: 4.5 A</li>
<li>Electrical resistance line constant wire: 79 Ω/km @ 20 °C</li>
<li>AC withstand voltage (wire - wire): 2.5 kV @ 60 s</li>
<li>Power frequency withstand voltage (wire - jacket): 2.5 kV @ 60 s</li>
</ul>
<h3>Temperature Range | Cable</h3>
<ul>
<li>Min. operating temperature (static): -40 °C</li>
<li>Max. operating temperature (fixed): 80 °C / 90 °C @ 10,000 h operation</li>
<li>Operating temperature min. (dynamic): -25 °C</li>
<li>Operating temperature max. (dynamic): 80 °C / 90 °C @ 10,000 h operation</li>
</ul>
<h3>Resistances | Cable</h3>
<ul>
<li>UV resistance: DIN EN ISO 4892-2 A</li>
<li>Flame resistance:</li>
<ul>
<li>UL 1581 § 1090</li>
<li>UL 1581 § 1100 FT2</li>
<li>IEC 60332-2-2</li>
</ul>
<li>Chemical resistance: Good, application-related testing</li>
<li>Gasoline resistance: Good, application-related testing</li>
<li>Oil resistance: Good, application-related testing | DIN EN 60811-404</li>
</ul>
<h3>Installation | Cable</h3>
<ul>
<li>Bending radius (fixed): 5 x Outer diameter</li>
<li>Bending radius (dynamic): 10 x Outer diameter</li>
<li>No. of bending cycles (C-track): 10 million @ 25 °C</li>
<li>Traversing distance (C-track): 10 m @ 25 °C | Horizontal</li>
<li>Travel speed (C-track): 3 m/s @ 25 °C</li>
<li>No. of torsion cycles: 2 million</li>
<li>Torsion stress: ± 180 °/m</li>
<li>Torsion speed: 35 cycles/min</li>
</ul>

Murr Elektronik 7000-08041-6301000 M8 Female 0° A-cod. With Cable Pur 3x0.25 Bk UL/CSA+drag Ch. 10m

murr elektronik 7000-08041-6301000 m8 female 0° a-cod. cable pur 3x0.25 bk ul/csa+drag ch. 10m dengan kabel ethernet elektronik/穆尔电子 母头 带电缆 以太网电缆 穆尔电子

murr-elektronik-7000-08041-6301000-m8-female-0-a-cod-with-cable-pur-3x0-25-bk-ul-csa-drag-ch-10m

PTFE Stainless Steel Single Lip Oil Seal 20 x 32 x 7

Reinforced Single PTFE sealing lip, SUS304 stainless steel housing

Typical applications : Compressors, Pumps, Mixers Actuators, Blowers, Stirring Systems.

Media : Heat transfer fluids, Air, Water, Powder, Foodstuff, Corrosive fluid.

<h3 class="md-block-header-three">PTFE Stainless Steel Single Lip Oil Seal 20 x 32 x 7</h3>Lip : Single LipInner Diameter (ID) 20mmOuter Diameter (OD) 32mmThickness (THK) 7mmDesign Features:<ul class="md-block-unordered-list-item"><li>Reinforced Single PTFE sealing lip, SUS304 stainless steel housing</li><li>Resist deformation under low pressure</li><li>General purpose rotary shaft seal</li><li>Suitable for unhardened shafts</li><li>Typical applications : Compressors, Pumps, Mixers Actuators, Blowers, Stirring Systems.</li></ul>Operating Limits:Temperature : -90 to +260 degreesMax Pressure : 1.5MpaMax Speed : 30m/sMedia : Heat transfer fluids, Air, Water, Powder, Foodstuff, Corrosive fluid.

<h3>PTFE Stainless Steel Single Lip Oil Seal 20 x 32 x 7</h3>
Lip : Single Lip
Inner Diameter (ID) 20mm
Outer Diameter (OD) 32mm
Thickness (THK) 7mm
Design Features:
<ul>
<li>Reinforced Single PTFE sealing lip, SUS304 stainless steel housing</li>
<li>Resist deformation under low pressure</li>
<li>General purpose rotary shaft seal</li>
<li>Suitable for unhardened shafts</li>
<li>Typical applications : Compressors, Pumps, Mixers Actuators, Blowers, Stirring Systems.</li>
</ul>
Operating Limits:
Temperature : -90 to +260 degrees
Max Pressure : 1.5Mpa
Max Speed : 30m/s
Media : Heat transfer fluids, Air, Water, Powder, Foodstuff, Corrosive fluid.

Others

Nachi

KOYO

Kawasaki

Logitech

SOLATRON

Hydraulic Seals

Ball Bearings

Linear Bearing

Nuts & Washers

Spherical Bearings 

Sleeve Bearings

Drills, Impact Drivers & Wrenches

John Ng

Ptfe Stainless Steel Single Lip Oil Seal 20 X 32 X 7

ptfe stainless steel single lip oil seal 20 32 segel minyak bibir tunggal seals oem pengedap oem/oem代工 ptfe不锈钢单唇油封20 油密封用品 oem代工

ptfe-stainless-steel-single-lip-oil-seal-20-x-32-x-7

PTFE Stainless Steel Double Lip Oil Seal 20 x 40 x 7

Seperate media PTFE sealing lip, SUS304 stainless steel housing

Ideal to keep oil in water & dirt out, low breakaway torque.

<h3 class="md-block-header-three">PTFE Stainless Steel Double Lip Oil Seal 20 x 40 x 7</h3>Lip : Double Lip (ML)Inner Diameter (ID) 20mmOuter Diameter (OD) 40mmThickness (THK) 7mmDesign Features:<ul class="md-block-unordered-list-item"><li>Seperate media PTFE sealing lip, SUS304 stainless steel housing</li><li>Resist deformation under low pressure</li><li>Ideal to keep oil in water &amp; dirt out, low breakaway torque.</li><li>Suitable for unhardened shafts</li><li>Typical applications : Compressors, Pumps, Mixers Actuators, Blowers, Stirring Systems.</li></ul>Operating Limits:Temperature : -90 to +260 degreesMax Pressure : 1.5MpaMax Speed : 30m/sMedia : Heat transfer fluids, Air, Water, Powder, Foodstuff, Corrosive fluid.

<h3>PTFE Stainless Steel Double Lip Oil Seal 20 x 40 x 7</h3>
Lip : Double Lip (ML)
Inner Diameter (ID) 20mm
Outer Diameter (OD) 40mm
Thickness (THK) 7mm
Design Features:
<ul>
<li>Seperate media PTFE sealing lip, SUS304 stainless steel housing</li>
<li>Resist deformation under low pressure</li>
<li>Ideal to keep oil in water &amp; dirt out, low breakaway torque.</li>
<li>Suitable for unhardened shafts</li>
<li>Typical applications : Compressors, Pumps, Mixers Actuators, Blowers, Stirring Systems.</li>
</ul>
Operating Limits:
Temperature : -90 to +260 degrees
Max Pressure : 1.5Mpa
Max Speed : 30m/s
Media : Heat transfer fluids, Air, Water, Powder, Foodstuff, Corrosive fluid.

Ptfe Stainless Steel Double Lip Oil Seal 20 X 40 X 7

ptfe stainless steel double lip oil seal 20 40 segel minyak bibir ganda seals oem pengedap oem/oem代工 ptfe不锈钢双唇油封20 油密封用品 oem代工

ptfe-stainless-steel-double-lip-oil-seal-20-x-40-x-7

Ptfe Stainless Steel Double Lip Oil Seal 30 X 50 X 7

Reinforced double PTFE sealing lip, SUS304 stainless steel housing

Hydrodynamic return feed spiral groove for operational reliability

<h3 class="md-block-header-three">Ptfe Stainless Steel Double Lip Oil Seal 30 X 50 X 7</h3>Lip : Double Lip (DL)Inner Diameter (ID) 30mmOuter Diameter (OD) 50mmThickness (THK) 7mmDesign Features:<ul class="md-block-unordered-list-item"><li>Reinforced double PTFE sealing lip, SUS304 stainless steel housing</li><li>Resist deformation under more pressure</li><li>Hydrodynamic return feed spiral groove for operational reliability</li><li>Suitable for unhardened shafts</li><li>Typical applications : Compressors, Pumps, Mixers Actuators, Blowers, Stirring Systems.</li></ul>Operating Limits:Temperature : -90 to +260 degreesMax Pressure : 3.0MpaMax Speed : 30m/sMedia : Heat transfer fluids, Air, Water, Powder, Foodstuff, Corrosive fluid.

<h3>Ptfe Stainless Steel Double Lip Oil Seal 30 X 50 X 7</h3>
Lip : Double Lip (DL)
Inner Diameter (ID) 30mm
Outer Diameter (OD) 50mm
Thickness (THK) 7mm
Design Features:
<ul>
<li>Reinforced double PTFE sealing lip, SUS304 stainless steel housing</li>
<li>Resist deformation under more pressure</li>
<li>Hydrodynamic return feed spiral groove for operational reliability</li>
<li>Suitable for unhardened shafts</li>
<li>Typical applications : Compressors, Pumps, Mixers Actuators, Blowers, Stirring Systems.</li>
</ul>
Operating Limits:
Temperature : -90 to +260 degrees
Max Pressure : 3.0Mpa
Max Speed : 30m/s
Media : Heat transfer fluids, Air, Water, Powder, Foodstuff, Corrosive fluid.

ptfe stainless steel double lip oil seal 30 50 segel minyak bibir ganda seals oem pengedap oem/oem代工 ptfe不锈钢双唇油封30 油密封用品 oem代工

ptfe-stainless-steel-double-lip-oil-seal-30-x-50-x-7

PTFE Stainless Steel Single Lip Oil Seal 17 x 28 x 7

<h3 class="md-block-header-three">PTFE Stainless Steel Single Lip Oil Seal 17 x 28 x 7</h3>Lip : Single LipInner Diameter (ID) 17mmOuter Diameter (OD) 28mmThickness (THK) 7mmDesign Features:<ul class="md-block-unordered-list-item"><li>Reinforced Single PTFE sealing lip, SUS304 stainless steel housing</li><li>Resist deformation under low pressure</li><li>General purpose rotary shaft seal</li><li>Suitable for unhardened shafts</li><li>Typical applications : Compressors, Pumps, Mixers Actuators, Blowers, Stirring Systems.</li></ul>Operating Limits:Temperature : -90 to +260 degreesMax Pressure : 1.5MpaMax Speed : 30m/sMedia : Heat transfer fluids, Air, Water, Powder, Foodstuff, Corrosive fluid.

<h3>PTFE Stainless Steel Single Lip Oil Seal 17 x 28 x 7</h3>
Lip : Single Lip
Inner Diameter (ID) 17mm
Outer Diameter (OD) 28mm
Thickness (THK) 7mm
Design Features:
<ul>
<li>Reinforced Single PTFE sealing lip, SUS304 stainless steel housing</li>
<li>Resist deformation under low pressure</li>
<li>General purpose rotary shaft seal</li>
<li>Suitable for unhardened shafts</li>
<li>Typical applications : Compressors, Pumps, Mixers Actuators, Blowers, Stirring Systems.</li>
</ul>
Operating Limits:
Temperature : -90 to +260 degrees
Max Pressure : 1.5Mpa
Max Speed : 30m/s
Media : Heat transfer fluids, Air, Water, Powder, Foodstuff, Corrosive fluid.

Ptfe Stainless Steel Single Lip Oil Seal 17 X 28 X 7

ptfe stainless steel single lip oil seal 17 28 segel minyak bibir tunggal seals oem pengedap oem/oem代工 ptfe不锈钢单唇油封17 油密封用品 oem代工

ptfe-stainless-steel-single-lip-oil-seal-17-x-28-x-7

Ptfe Stainless Steel Double Lip Oil Seal 30 X 47 X 7

<h3 class="md-block-header-three">Ptfe Stainless Steel Double Lip Oil Seal 30 X 47 X 7</h3>Lip : Double Lip (DL)Inner Diameter (ID) 30mmOuter Diameter (OD) 47mmThickness (THK) 7mmDesign Features:<ul class="md-block-unordered-list-item"><li>Reinforced double PTFE sealing lip, SUS304 stainless steel housing</li><li>Resist deformation under more pressure</li><li>Hydrodynamic return feed spiral groove for operational reliability</li><li>Suitable for unhardened shafts</li><li>Typical applications : Compressors, Pumps, Mixers Actuators, Blowers, Stirring Systems.</li></ul>Operating Limits:Temperature : -90 to +260 degreesMax Pressure : 3.0MpaMax Speed : 30m/sMedia : Heat transfer fluids, Air, Water, Powder, Foodstuff, Corrosive fluid.

<h3>Ptfe Stainless Steel Double Lip Oil Seal 30 X 47 X 7</h3>
Lip : Double Lip (DL)
Inner Diameter (ID) 30mm
Outer Diameter (OD) 47mm
Thickness (THK) 7mm
Design Features:
<ul>
<li>Reinforced double PTFE sealing lip, SUS304 stainless steel housing</li>
<li>Resist deformation under more pressure</li>
<li>Hydrodynamic return feed spiral groove for operational reliability</li>
<li>Suitable for unhardened shafts</li>
<li>Typical applications : Compressors, Pumps, Mixers Actuators, Blowers, Stirring Systems.</li>
</ul>
Operating Limits:
Temperature : -90 to +260 degrees
Max Pressure : 3.0Mpa
Max Speed : 30m/s
Media : Heat transfer fluids, Air, Water, Powder, Foodstuff, Corrosive fluid.

ptfe stainless steel double lip oil seal 30 47 segel minyak bibir ganda seals oem pengedap oem/oem代工 ptfe不锈钢双唇油封30 油密封用品 oem代工

ptfe-stainless-steel-double-lip-oil-seal-30-x-47-x-7

Ptfe Stainless Steel Double Lip Oil Seal 35 X 47 X 7

<h3 class="md-block-header-three">Ptfe Stainless Steel Double Lip Oil Seal 35 X 47 X 7</h3>Lip : Double Lip (DL)Inner Diameter (ID) 35mmOuter Diameter (OD) 47mmThickness (THK) 7mmDesign Features:<ul class="md-block-unordered-list-item"><li>Reinforced double PTFE sealing lip, SUS304 stainless steel housing</li><li>Resist deformation under more pressure</li><li>Hydrodynamic return feed spiral groove for operational reliability</li><li>Suitable for unhardened shafts</li><li>Typical applications : Compressors, Pumps, Mixers Actuators, Blowers, Stirring Systems.</li></ul>Operating Limits:Temperature : -90 to +260 degreesMax Pressure : 3.0MpaMax Speed : 30m/sMedia : Heat transfer fluids, Air, Water, Powder, Foodstuff, Corrosive fluid.

<h3>Ptfe Stainless Steel Double Lip Oil Seal 35 X 47 X 7</h3>
Lip : Double Lip (DL)
Inner Diameter (ID) 35mm
Outer Diameter (OD) 47mm
Thickness (THK) 7mm
Design Features:
<ul>
<li>Reinforced double PTFE sealing lip, SUS304 stainless steel housing</li>
<li>Resist deformation under more pressure</li>
<li>Hydrodynamic return feed spiral groove for operational reliability</li>
<li>Suitable for unhardened shafts</li>
<li>Typical applications : Compressors, Pumps, Mixers Actuators, Blowers, Stirring Systems.</li>
</ul>
Operating Limits:
Temperature : -90 to +260 degrees
Max Pressure : 3.0Mpa
Max Speed : 30m/s
Media : Heat transfer fluids, Air, Water, Powder, Foodstuff, Corrosive fluid.

ptfe stainless steel double lip oil seal 35 47 segel minyak bibir ganda seals oem pengedap oem/oem代工 ptfe不锈钢双唇油封35 油密封用品 oem代工

ptfe-stainless-steel-double-lip-oil-seal-35-x-47-x-7

Ptfe Stainless Steel Single Lip Oil Seal 65 X 80 X 8

<h3 class="md-block-header-three">Ptfe Stainless Steel Single Lip Oil Seal 65 X 80 X 8</h3>Lip : Single Lip (SL)Inner Diameter (ID) 65mmOuter Diameter (OD) 80mmThickness (THK) 8mmDesign Features:<ul class="md-block-unordered-list-item"><li>Reinforced Single PTFE sealing lip, SUS304 stainless steel housing</li><li>Resist deformation under low pressure</li><li>General purpose rotary shaft seal</li><li>Suitable for unhardened shafts</li><li>Typical applications : Compressors, Pumps, Mixers Actuators, Blowers, Stirring Systems.</li></ul>Operating Limits:Temperature : -90 to +260 degreesMax Pressure : 1.5MpaMax Speed : 30m/sMedia : Heat transfer fluids, Air, Water, Powder, Foodstuff, Corrosive fluid.

<h3>Ptfe Stainless Steel Single Lip Oil Seal 65 X 80 X 8</h3>
Lip : Single Lip (SL)
Inner Diameter (ID) 65mm
Outer Diameter (OD) 80mm
Thickness (THK) 8mm
Design Features:
<ul>
<li>Reinforced Single PTFE sealing lip, SUS304 stainless steel housing</li>
<li>Resist deformation under low pressure</li>
<li>General purpose rotary shaft seal</li>
<li>Suitable for unhardened shafts</li>
<li>Typical applications : Compressors, Pumps, Mixers Actuators, Blowers, Stirring Systems.</li>
</ul>
Operating Limits:
Temperature : -90 to +260 degrees
Max Pressure : 1.5Mpa
Max Speed : 30m/s
Media : Heat transfer fluids, Air, Water, Powder, Foodstuff, Corrosive fluid.

ptfe stainless steel single lip oil seal 65 80 segel minyak bibir tunggal seals oem pengedap oem/oem代工 ptfe不锈钢单唇油封65 油密封用品 oem代工

ptfe-stainless-steel-single-lip-oil-seal-65-x-80-x-8

Ptfe Stainless Steel Double Lip Oil Seal 35 X 50 X 7

<h3 class="md-block-header-three">Ptfe Stainless Steel Double Lip Oil Seal 35 X 50 X 7</h3>Lip : Double Lip (DL)Inner Diameter (ID) 35mmOuter Diameter (OD) 50mmThickness (THK) 7mmDesign Features:<ul class="md-block-unordered-list-item"><li>Reinforced double PTFE sealing lip, SUS304 stainless steel housing</li><li>Resist deformation under more pressure</li><li>Hydrodynamic return feed spiral groove for operational reliability</li><li>Suitable for unhardened shafts</li><li>Typical applications : Compressors, Pumps, Mixers Actuators, Blowers, Stirring Systems.</li></ul>Operating Limits:Temperature : -90 to +260 degreesMax Pressure : 3.0MpaMax Speed : 30m/sMedia : Heat transfer fluids, Air, Water, Powder, Foodstuff, Corrosive fluid.

<h3>Ptfe Stainless Steel Double Lip Oil Seal 35 X 50 X 7</h3>
Lip : Double Lip (DL)
Inner Diameter (ID) 35mm
Outer Diameter (OD) 50mm
Thickness (THK) 7mm
Design Features:
<ul>
<li>Reinforced double PTFE sealing lip, SUS304 stainless steel housing</li>
<li>Resist deformation under more pressure</li>
<li>Hydrodynamic return feed spiral groove for operational reliability</li>
<li>Suitable for unhardened shafts</li>
<li>Typical applications : Compressors, Pumps, Mixers Actuators, Blowers, Stirring Systems.</li>
</ul>
Operating Limits:
Temperature : -90 to +260 degrees
Max Pressure : 3.0Mpa
Max Speed : 30m/s
Media : Heat transfer fluids, Air, Water, Powder, Foodstuff, Corrosive fluid.

ptfe stainless steel double lip oil seal 35 50 segel minyak bibir ganda seals oem pengedap oem/oem代工 ptfe不锈钢双唇油封35 油密封用品 oem代工

ptfe-stainless-steel-double-lip-oil-seal-35-x-50-x-7

Ptfe Stainless Steel Single Lip Oil Seal 80 X 100 X 10

<h3 class="md-block-header-three">Ptfe Stainless Steel Single Lip Oil Seal 80 X 100 X 10</h3>Lip : Single Lip (SL)Inner Diameter (ID) 80mmOuter Diameter (OD) 100mmThickness (THK) 10mmDesign Features:<ul class="md-block-unordered-list-item"><li>Reinforced Single PTFE sealing lip, SUS304 stainless steel housing</li><li>Resist deformation under low pressure</li><li>General purpose rotary shaft seal</li><li>Suitable for unhardened shafts</li><li>Typical applications : Compressors, Pumps, Mixers Actuators, Blowers, Stirring Systems.</li></ul>Operating Limits:Temperature : -90 to +260 degreesMax Pressure : 1.5MpaMax Speed : 30m/sMedia : Heat transfer fluids, Air, Water, Powder, Foodstuff, Corrosive fluid.

<h3>Ptfe Stainless Steel Single Lip Oil Seal 80 X 100 X 10</h3>
Lip : Single Lip (SL)
Inner Diameter (ID) 80mm
Outer Diameter (OD) 100mm
Thickness (THK) 10mm
Design Features:
<ul>
<li>Reinforced Single PTFE sealing lip, SUS304 stainless steel housing</li>
<li>Resist deformation under low pressure</li>
<li>General purpose rotary shaft seal</li>
<li>Suitable for unhardened shafts</li>
<li>Typical applications : Compressors, Pumps, Mixers Actuators, Blowers, Stirring Systems.</li>
</ul>
Operating Limits:
Temperature : -90 to +260 degrees
Max Pressure : 1.5Mpa
Max Speed : 30m/s
Media : Heat transfer fluids, Air, Water, Powder, Foodstuff, Corrosive fluid.