ELORA

Igus

Iwata

MISUMI

Electricals

electricals

Cable Carriers

cable-carriers

IT & Electronics

it-electronics

IT Accessories

it-accessories

Mechanical Parts

mechanical-parts

Lead Screws 

lead-screws

O Ring

o-ring

Spanners & Sockets

spanners-sockets

Torque Wrenches

torque-wrenches

Fasteners

fasteners

Washers

washers

Misumi C-MTSFRC8 Lead Screw Nuts Flanged Round Flanged Copper Alloy 20 Mm Length 15 Mm Od 

Screw Turn Direction: [Right] Right-Hand Thread

<h3 class="md-block-header-three">Misumi C-MTSFRC8 Lead Screw Nuts Flanged Round Flanged Copper Alloy 20 Mm Length 15 Mm Od </h3><ul class="md-block-unordered-list-item"><li>Type: Flanged Type</li><li>Screw Turn Direction: [Right] Right-Hand Thread</li><li>Nominal of Thread d(Ø): 8</li><li>Pitch(mm): 1.5</li><li>Nut Shape: Round Flanged</li><li>Nut Outer Dia. D(Ø): 15</li><li>Material: Copper Alloy</li><li>Surface Treatment: Not Provided</li><li>Installation Method: Through Hole</li><li>Nut Length L1 (or L)(mm): 20</li><li>Number of Mounting Holes: - </li></ul>

<h3>Misumi C-MTSFRC8 Lead Screw Nuts Flanged Round Flanged Copper Alloy 20 Mm Length 15 Mm Od&nbsp;</h3>
<ul>
<li>Type: Flanged Type</li>
<li>Screw Turn Direction: [Right] Right-Hand Thread</li>
<li>Nominal of Thread d(Ø): 8</li>
<li>Pitch(mm): 1.5</li>
<li>Nut Shape: Round Flanged</li>
<li>Nut Outer Dia. D(Ø): 15</li>
<li>Material: Copper Alloy</li>
<li>Surface Treatment: Not Provided</li>
<li>Installation Method: Through Hole</li>
<li>Nut Length L1 (or L)(mm): 20</li>
<li>Number of Mounting Holes: -&nbsp;</li>
</ul>

Timing Belts

Suction cups

Timing Pulleys

Safety Fences

Pneumatic Guided Cylinders

Oil Free Bushings

Square End Mills 

Shaft Couplings

Electric Linear Actuators

Ball Bearings

Misumi 

buyerIntroduction

Misumi C-MTSFRC8 Lead Screw Nuts Flanged Round Flanged Copper Alloy 20 Mm Length 15 Mm Od

misumi c-mtsfrc8 lead screw nuts flanged round copper alloy 20mm length 15 od mur sekrup timbal bergelang paduan tembaga bulat panjang screws nat skru plumbum bebibir aloi misumi/米思米 丝杠螺母法兰圆形法兰铜合金 毫米长 毫米外径 导螺杆 米思米

misumi-c-mtsfrc8-lead-screw-nuts-flanged-round-flanged-copper-alloy-20-mm-length-15-mm-od

Misumi C-MTSNRC8 Lead Screw Nuts Flanged Compact Flanged Copper Alloy 20 Mm Length 15 Mm Od 

<h3 class="md-block-header-three">Misumi C-MTSNRC8 Lead Screw Nuts Flanged Compact Flanged Copper Alloy 20 Mm Length 15 Mm Od </h3><ul class="md-block-unordered-list-item"><li>Type: Flanged Type</li><li>Screw Turn Direction: [Right] Right-Hand Thread</li><li>Nominal of Thread d(Ø): 8</li><li>Pitch(mm): 1.5</li><li>Nut Shape: Compact Flanged</li><li>Nut Outer Dia. D(Ø): 15</li><li>Material: Copper Alloy</li><li>Surface Treatment: Not Provided</li><li>Installation Method: Through Hole</li><li>Nut Length L1 (or L)(mm): 20</li><li>Number of Mounting Holes: 5</li></ul>

<h3>Misumi C-MTSNRC8 Lead Screw Nuts Flanged Compact Flanged Copper Alloy 20 Mm Length 15 Mm Od&nbsp;</h3>
<ul>
<li>Type: Flanged Type</li>
<li>Screw Turn Direction: [Right] Right-Hand Thread</li>
<li>Nominal of Thread d(Ø): 8</li>
<li>Pitch(mm): 1.5</li>
<li>Nut Shape: Compact Flanged</li>
<li>Nut Outer Dia. D(Ø): 15</li>
<li>Material: Copper Alloy</li>
<li>Surface Treatment: Not Provided</li>
<li>Installation Method: Through Hole</li>
<li>Nut Length L1 (or L)(mm): 20</li>
<li>Number of Mounting Holes: 5</li>
</ul>

Misumi C-MTSNRC8 Lead Screw Nuts Flanged Compact Flanged Copper Alloy 20 Mm Length 15 Mm Od

misumi c-mtsnrc8 lead screw nuts flanged compact copper alloy 20mm length 15 od mur sekrup timbal flensa paduan tembaga berflensa kompak panjang screws nat skru plumbum bebibir padat aloi misumi/米思米 丝杠螺母法兰紧凑法兰铜合金 毫米长 毫米外径 导螺杆 米思米

misumi-c-mtsnrc8-lead-screw-nuts-flanged-compact-flanged-copper-alloy-20-mm-length-15-mm-od

This product can be use in this medium below :

Operating temperature – 10 – 20 Deg C (cold service)

Material Type: Black perfluoroethers rubber compound, hardness Shore A 70-80.

FFKM 2375 has excellent chemical resistance, good mechanical properties and excellent heat resistance, chemical resistance, the most widely used types of media, including various acids, bases, amines, steam, ethylene oxide, and the like. Its products can play a role in long-term reliability of industrial solvents and corrosive chemicals and electronic grade contact occasions.

The temperature for continuous use is +230 ℃ , Maximum temperature: +260 ℃

FFKM 2375 used in chemical, petrochemical, semiconductor, pharmaceutical, oil and gas exploration, aerospace and other fields.

performance specification                                        unit                   Original Properties                 Value

Density                                                                        g/cm3                   ASTM D-792                          1.99

Shore A hardness                                                       pt                         ASTM D-2240                          74    

Tensile at Break                                                        MPa                      ASTM D-412                            19.5 

100% Modulus                                                          MPa                      ASTM D-412                             7.5

Elongation at Break                                                    %                        ASTM D-412                             180

Compression Set,70hr@200℃ 214# O-Ring       %                         ASTM D-395                            18.5

Note: some curing conditions of 160 degrees * 10Min Sec conditions: 230 degrees * (1 + 4) h

Immersion chemicals                      FFKM2375

Inorganic acid                                            A

Organic acids                                              A

Base                                                              A

Alcohol                                                         A

Aldehyde                                                     A

Amine (room temperature)                    A

Amine (> 70 degrees)                               B

Ether                                                             A

Ester                                                             A

Ketone                                                         A

Steam / hot water                                     A                 

Strong oxidizers                                        B

Alkanes                                                       A

Tetrahydrofuran                                       A

O-Rings and rubber seals are generally used for:

· Applications that require resistance to OIL

· Applications that are required to work in low temperatures (-0°C)

· High performance Fuel systems that requires strictly no leakage

O-rings need to be installed properly for a perfect fit and sealing. It is important that you install the O-ring in a prescribed manner to ensure your application continues to function properly. You will also ensure you increase the life of the application.

The process of installing an O-ring into a male gland is an intricate affair that should be carefully undertaken. Glide it along the shaft so as it reaches the gland. At that point, it should easily snap into place. Simple as it might sound, a number of steps will ensure that the O-ring doesn’t get damaged.

If you want to install an O-ring correctly and within a short time, here are steps to follow:

· Covering and lubricating the threading of the shaft

The threading of the shaft has the potential of tearing the rubber seal. Cover the threads using a masking tape and then lubricate them to allow for easy passage of the O-ring. The aim is to have the O-ring slide through without getting torn.

That’s a tip that will save you the stress of a torn O-ring. In fact, running the O-ring over jagged or sharp objects could get it torn. You may not be able to notice some of these tears. That’s why you should ensure you prevent them from occurring in the first place.

You will have to stretch the O-ring over the shaft. Ensure you do it evenly. Pulling from one side is a no-no. If anything, you should stretch the O-ring as little as possible. You will not just get a tighter grip but added security too.

Instead of rolling the O-ring down the shaft, slide it. If you spiral wind or roll an O-ring, it cannot be properly installed. It will also not function optimally and can even end up being damaged. If you have a lubricant, apply it on the O-ring and you will keep it rolling.

Place the female component in a manner that allows its radius to go around the corner. This should be done when you are finalizing the installation process. Ensure the lead of this component is inside the chamfer. This is how you will be able to guarantee the safety of the O-ring.

For O-rings to perform optimally, they have to be properly installed. It doesn’t just provide secure sealing but also increases the service life of the component together with the application. Don’t compromise on this process.

<h3 class="md-block-header-three">ORING Material: SILICONE</h3><h3 class="md-block-header-three">Oring Id 15 X Od 17 X C/S 1</h3><h3 class="md-block-header-three">This product can be use in this medium below :</h3>Product used in - Propylene OxideOperating temperature – 10 – 20 Deg C (cold service)Operating pressure – 60 BarDesign pressure – 78 barMaterial Data SheetsMaterial Type: Black perfluoroethers rubber compound, hardness Shore A 70-80.Material Features : FFKM 2375 has excellent chemical resistance, good mechanical properties and excellent heat resistance, chemical resistance, the most widely used types of media, including various acids, bases, amines, steam, ethylene oxide, and the like. Its products can play a role in long-term reliability of industrial solvents and corrosive chemicals and electronic grade contact occasions.The temperature for continuous use is +230 ℃ , Maximum temperature: +260 ℃Applications: FFKM 2375 used in chemical, petrochemical, semiconductor, pharmaceutical, oil and gas exploration, aerospace and other fields.Mechanical propertiesperformance specification unit Original Properties ValueDensity g/cm3 ASTM D-792 1.99Shore A hardness pt ASTM D-2240 74 Tensile at Break MPa ASTM D-412 19.5 100% Modulus MPa ASTM D-412 7.5Elongation at Break % ASTM D-412 180Compression Set,70hr@200℃ 214# O-Ring % ASTM D-395 18.5Note: some curing conditions of 160 degrees * 10Min Sec conditions: 230 degrees * (1 + 4) hChemical resistanceImmersion chemicals FFKM2375Inorganic acid AOrganic acids ABase AAlcohol AAldehyde AAmine (room temperature) AAmine (&gt; 70 degrees) BEther AEster AKetone ASteam / hot water A Strong oxidizers BAlkanes ATetrahydrofuran ANote: A : is volume change rate &lt;10%B : is volume change rate &lt;20% ~ 30%C : is the volume change rate &lt;30% ~Primary UsageO-Rings and rubber seals are generally used for:· Applications that require resistance to OIL· Applications that are required to work in low temperatures (-0°C)· High performance Fuel systems that requires strictly no leakage<ul class="md-block-unordered-list-item"><li>Aircrafts</li><li>Marine Ships</li><li>F1 Cars</li></ul>· General Industrial Use Tips for installation of an O-ringO-rings need to be installed properly for a perfect fit and sealing. It is important that you install the O-ring in a prescribed manner to ensure your application continues to function properly. You will also ensure you increase the life of the application.So how do you install an O-ring?The process of installing an O-ring into a male gland is an intricate affair that should be carefully undertaken. Glide it along the shaft so as it reaches the gland. At that point, it should easily snap into place. Simple as it might sound, a number of steps will ensure that the O-ring doesn’t get damaged.If you want to install an O-ring correctly and within a short time, here are steps to follow:· Covering and lubricating the threading of the shaftThe threading of the shaft has the potential of tearing the rubber seal. Cover the threads using a masking tape and then lubricate them to allow for easy passage of the O-ring. The aim is to have the O-ring slide through without getting torn.· Don’t force it over sharp cornersThat’s a tip that will save you the stress of a torn O-ring. In fact, running the O-ring over jagged or sharp objects could get it torn. You may not be able to notice some of these tears. That’s why you should ensure you prevent them from occurring in the first place.· Even stretchingYou will have to stretch the O-ring over the shaft. Ensure you do it evenly. Pulling from one side is a no-no. If anything, you should stretch the O-ring as little as possible. You will not just get a tighter grip but added security too.· Don’t roll it down the shaftInstead of rolling the O-ring down the shaft, slide it. If you spiral wind or roll an O-ring, it cannot be properly installed. It will also not function optimally and can even end up being damaged. If you have a lubricant, apply it on the O-ring and you will keep it rolling.· Finishing it offPlace the female component in a manner that allows its radius to go around the corner. This should be done when you are finalizing the installation process. Ensure the lead of this component is inside the chamfer. This is how you will be able to guarantee the safety of the O-ring.For O-rings to perform optimally, they have to be properly installed. It doesn’t just provide secure sealing but also increases the service life of the component together with the application. Don’t compromise on this process.Installation Guide<figure class="md-block-image"><img src="https://storage.googleapis.com/eezee-product-images/DmU4MMN5fPFBF2~SUnGVrQ.png" alt="" /><figcaption class="md-block-image-caption"></figcaption></figure>

<h3>ORING Material: SILICONE</h3>
<h3>Oring Id 15 X Od 17 X C/S 1</h3>
<h3>This product can be use in this medium below :</h3>
Product used in - Propylene Oxide
Operating temperature – 10 – 20 Deg C (cold service)
Operating pressure – 60 Bar
Design pressure – 78 bar
<ins>Material Data Sheets</ins>
Material Type: Black perfluoroethers rubber compound, hardness Shore A 70-80.
<ins>Material Features : </ins>
FFKM 2375 has excellent chemical resistance, good mechanical properties and excellent heat resistance, chemical resistance, the most widely used types of media, including various acids, bases, amines, steam, ethylene oxide, and the like. Its products can play a role in long-term reliability of industrial solvents and corrosive chemicals and electronic grade contact occasions.
The temperature for continuous use is +230 ℃ , Maximum temperature: +260 ℃
Applications:&nbsp;
FFKM 2375 used in chemical, petrochemical, semiconductor, pharmaceutical, oil and gas exploration, aerospace and other fields.
<ins>Mechanical properties</ins>
performance specification unit Original Properties Value
Density g/cm3 ASTM D-792 1.99
Shore A hardness pt ASTM D-2240 74&nbsp;&nbsp;&nbsp;&nbsp;
Tensile at Break MPa ASTM D-412 19.5&nbsp;
100% Modulus MPa ASTM D-412 7.5
Elongation at Break % ASTM D-412 180
Compression Set,70hr@200℃ 214# O-Ring % ASTM D-395 18.5
Note: some curing conditions of 160 degrees * 10Min Sec conditions: 230 degrees * (1 + 4) h
<ins>Chemical resistance</ins>
Immersion chemicals FFKM2375
Inorganic acid A
Organic acids A
Base A
Alcohol A
Aldehyde A
Amine (room temperature) A
Amine (&gt; 70 degrees) B
Ether A
Ester A
Ketone A
Steam / hot water A&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
Strong oxidizers B
Alkanes A
Tetrahydrofuran A
Note:&nbsp;
A : is volume change rate &lt;10%
B : is volume change rate &lt;20% ~ 30%
C : is the volume change rate &lt;30% ~
<ins>Primary Usage</ins>
O-Rings and rubber seals are generally used for:
· Applications that require resistance to OIL
· Applications that are required to work in low temperatures (-0°C)
· High performance Fuel systems that requires strictly no leakage
<ul>
<li>Aircrafts</li>
<li>Marine Ships</li>
<li>F1 Cars</li>
</ul>
· General Industrial Use&nbsp;
<ins>Tips for installation of an O-ring</ins>
O-rings need to be installed properly for a perfect fit and sealing. It is important that you install the O-ring in a prescribed manner to ensure your application continues to function properly. You will also ensure you increase the life of the application.
<ins>So how do you install an O-ring?</ins>
The process of installing an O-ring into a male gland is an intricate affair that should be carefully undertaken. Glide it along the shaft so as it reaches the gland. At that point, it should easily snap into place. Simple as it might sound, a number of steps will ensure that the O-ring doesn’t get damaged.
If you want to install an O-ring correctly and within a short time, here are steps to follow:
· Covering and lubricating the threading of the shaft
The threading of the shaft has the potential of tearing the rubber seal. Cover the threads using a masking tape and then lubricate them to allow for easy passage of the O-ring. The aim is to have the O-ring slide through without getting torn.
· Don’t force it over sharp corners
That’s a tip that will save you the stress of a torn O-ring. In fact, running the O-ring over jagged or sharp objects could get it torn. You may not be able to notice some of these tears. That’s why you should ensure you prevent them from occurring in the first place.
· Even stretching
You will have to stretch the O-ring over the shaft. Ensure you do it evenly. Pulling from one side is a no-no. If anything, you should stretch the O-ring as little as possible. You will not just get a tighter grip but added security too.
· Don’t roll it down the shaft
Instead of rolling the O-ring down the shaft, slide it. If you spiral wind or roll an O-ring, it cannot be properly installed. It will also not function optimally and can even end up being damaged. If you have a lubricant, apply it on the O-ring and you will keep it rolling.
· Finishing it off
Place the female component in a manner that allows its radius to go around the corner. This should be done when you are finalizing the installation process. Ensure the lead of this component is inside the chamfer. This is how you will be able to guarantee the safety of the O-ring.
For O-rings to perform optimally, they have to be properly installed. It doesn’t just provide secure sealing but also increases the service life of the component together with the application. Don’t compromise on this process.
<ins>Installation Guide</ins>

 <div class="img-ctnr">
 <amp-img 
 on="tap:cev1h"
 tabindex="0"
 role="button"
 class="contain"
 layout="fill"
 src="https://storage.googleapis.com/eezee-product-images/DmU4MMN5fPFBF2~SUnGVrQ.png"
 ></amp-img>
 </div>
 
 <amp-image-lightbox 
 id="cev1h" 
 layout="nodisplay"></amp-image-lightbox>

John

Others

Optibelt

Gates

SAMTECH

VITON

V Rings

Rubber Seals

Oil Seals

Plumbing Tools & Equipment

Hydraulic Seals

Wall Plugs, Anchors, Fixings & Kits

Vee-Belts

Oring Id 15 X Od 17 X C/S 1

oring id 15 od 17 c/s ring o-ring ylt gelang o型圈

oring-id-15-x-od-17-x-c-s-1

Shim Ring, Inner Diameter 15mm X Outer Diameter 20mm, Pack of 10 (Available in Brass, Carbon Steel and 304 Stainless Steel)

Shim Rings, also known as Shim Washers, are available in various thickness to align gaps and uneven surfaces. Shim washers look similar to flat washers, but are different in their usage and purpose.

Produced in Japan, these are made to extremely precise tolerances and are free from burrs. We are able to offer shim washers in different materials such as Brass, Carbon Steel (SPCC) and 304 stainless steel.

Use them for screws, axles, bearing faces and machine bases. Depending on the material, thickness variants range from 0.01mm to 1mm. Each package contains 10 pcs of the same thickness in the above given inner diameter and outer diameter sizes.

Shim washers and flat washers are inherently different in their purpose and tolerances. Here are three differences that set shim washers apart from flat washers.

They serve a different purpose in life. While flat washers are used for fastening, load distribution and surface protection, shim washers are used for gap alignment. Flat washers are usually used together with screws, bolts or nuts. While shim washers can be used in the same way, they can be slotted into threaded screws or axles to carry out their job.

Based on DIN125A standard, flat washers are produced with nominal dimensions with no tolerance values given. Our flat washers are supplied with the understanding that the thickness variance will range from 0 to 0.2mm. For example, an M3 flat washer will have thickness ranging from 0.4mm to 0.6mm, even in the same batch!

Shim washers are produced to close tolerances, usually up to 0.2mm for ID and OD, and as small as +/-0.02mm for thickness. 

In short, shim washers are more precise than flat washers because they have to be. During gap alignment or leveling, minor differences in thickness and diameters must be taken into account for fear of misalignment. 

Flat washers usually have a single thickness based on a given ID and OD. For example, an M3 flat washer with ID 3.2mm and OD 6mm will have thickness 0.4mm. If you are lucky (or not), you might find some with 0.5mm in the same batch. Not reassuring? Not to worry, being used for fastening, the thickness of flat washers is usually not a focal point.

Product Description: Shim Ring (Also known as Shim Washer)

Manufacturer: Iwata Manufacturing Co., Ltd

Materials: Carbon Steel (SPCC), Brass and 304 Stainless Steel

<h3 class="md-block-header-three">Shim Ring, Inner Diameter 15mm X Outer Diameter 20mm, Pack of 10 (Available in Brass, Carbon Steel and 304 Stainless Steel)</h3>Shim Rings, also known as Shim Washers, are available in various thickness to align gaps and uneven surfaces. Shim washers look similar to flat washers, but are different in their usage and purpose.Produced in Japan, these are made to extremely precise tolerances and are free from burrs. We are able to offer shim washers in different materials such as Brass, Carbon Steel (SPCC) and 304 stainless steel.Use them for screws, axles, bearing faces and machine bases. Depending on the material, thickness variants range from 0.01mm to 1mm. Each package contains 10 pcs of the same thickness in the above given inner diameter and outer diameter sizes.Shim washers and flat washers are inherently different in their purpose and tolerances. Here are three differences that set shim washers apart from flat washers.Purpose And UsageThey serve a different purpose in life. While flat washers are used for fastening, load distribution and surface protection, shim washers are used for gap alignment. Flat washers are usually used together with screws, bolts or nuts. While shim washers can be used in the same way, they can be slotted into threaded screws or axles to carry out their job.TolerancesBased on DIN125A standard, flat washers are produced with nominal dimensions with no tolerance values given. Our flat washers are supplied with the understanding that the thickness variance will range from 0 to 0.2mm. For example, an M3 flat washer will have thickness ranging from 0.4mm to 0.6mm, even in the same batch!Shim washers are produced to close tolerances, usually up to 0.2mm for ID and OD, and as small as +/-0.02mm for thickness. In short, shim washers are more precise than flat washers because they have to be. During gap alignment or leveling, minor differences in thickness and diameters must be taken into account for fear of misalignment. Available ThicknessFlat washers usually have a single thickness based on a given ID and OD. For example, an M3 flat washer with ID 3.2mm and OD 6mm will have thickness 0.4mm. If you are lucky (or not), you might find some with 0.5mm in the same batch. Not reassuring? Not to worry, being used for fastening, the thickness of flat washers is usually not a focal point.Product Description: Shim Ring (Also known as Shim Washer)Manufacturer: Iwata Manufacturing Co., LtdMaterials: Carbon Steel (SPCC), Brass and 304 Stainless SteelID: 15mmOD: 20mmThickness: 0.01mm to 1mm.Quantity Per Package: 10 pcsCountry of Origin: Japan

<h3>Shim Ring, Inner Diameter 15mm X Outer Diameter 20mm, Pack of 10 (Available in Brass, Carbon Steel and 304 Stainless Steel)</h3>
Shim Rings, also known as Shim Washers, are available in various thickness to align gaps and uneven surfaces. Shim washers look similar to flat washers, but are different in their usage and purpose.
Produced in Japan, these are made to extremely precise tolerances and are free from burrs. We are able to offer shim washers in different materials such as Brass, Carbon Steel (SPCC) and 304 stainless steel.
Use them for screws, axles, bearing faces and machine bases. Depending on the material, thickness variants range from 0.01mm to 1mm. Each package contains 10 pcs of the same thickness in the above given inner diameter and outer diameter sizes.
Shim washers and flat washers are inherently different in their purpose and tolerances. Here are three differences that set shim washers apart from flat washers.
Purpose And Usage
They serve a different purpose in life. While flat washers are used for fastening, load distribution and surface protection, shim washers are used for gap alignment. Flat washers are usually used together with screws, bolts or nuts. While shim washers can be used in the same way, they can be slotted into threaded screws or axles to carry out their job.
Tolerances
Based on DIN125A standard, flat washers are produced with nominal dimensions with no tolerance values given. Our flat washers are supplied with the understanding that the thickness variance will range from 0 to 0.2mm. For example, an M3 flat washer will have thickness ranging from 0.4mm to 0.6mm, even in the same batch!
Shim washers are produced to close tolerances, usually up to 0.2mm for ID and OD, and as small as +/-0.02mm for thickness. 
In short, shim washers are more precise than flat washers because they have to be. During gap alignment or leveling, minor differences in thickness and diameters must be taken into account for fear of misalignment. 
Available Thickness
Flat washers usually have a single thickness based on a given ID and OD. For example, an M3 flat washer with ID 3.2mm and OD 6mm will have thickness 0.4mm. If you are lucky (or not), you might find some with 0.5mm in the same batch. Not reassuring? Not to worry, being used for fastening, the thickness of flat washers is usually not a focal point.
Product Description: Shim Ring (Also known as Shim Washer)
Manufacturer: Iwata Manufacturing Co., Ltd
Materials: Carbon Steel (SPCC), Brass and 304 Stainless Steel
ID: 15mm
OD: 20mm
Thickness: 0.01mm to 1mm.
Quantity Per Package: 10 pcs
Country of Origin: Japan

Precision Brand

Ergomat

Southco

DYMON

SCRUBS

Machinery Accessories

Screw

Painting Tools

Hooks & Eyes

Drill Bits & Drill Bit Sets

Other Tools

Hose Clamp

Leland

Iwata Shim Ring, Inner Diameter 15mm X Outer Diameter 20mm, Pack of 10

iwata shim ring, inner diameter 15mm outer 20mm, pack 10 cincin iwata, dalam luar kemasan buah washers pek iwata/岩田 垫片环，内径 15 毫米 外径 20 毫米，10 个一包 岩田

iwata-shim-ring-inner-diameter-15mm-x-outer-diameter-20mm-pack-of-10

Carbon Steel ID 15mm x OD 20mm x 0.10mm PN RF015020010, Pack of 10 Pieces

Carbon Steel ID 15mm x OD 20mm x 0.15mm PN RF015020015, Pack of 10 Pieces

Carbon Steel ID 15mm x OD 20mm x 0.20mm PN RF015020020, Pack of 10 Pieces

Carbon Steel ID 15mm x OD 20mm x 0.30mm PN RF015020030, Pack of 10 Pieces

Carbon Steel ID 15mm x OD 20mm x 0.50mm PN RF015020050, Pack of 10 Pieces

Carbon Steel ID 15mm x OD 20mm x 1mm PN RF015020100, Pack of 10 Pieces

Brass ID 15mm x OD 20mm x 0.05mm PN RB015020005, Pack of 10 Pieces

Brass ID 15mm x OD 20mm x 0.10mm PN RB015020010, Pack of 10 Pieces

Brass ID 15mm x OD 20mm x 0.15mm PN RB015020015, Pack of 10 Pieces

Brass ID 15mm x OD 20mm x 0.20mm PN RB015020020, Pack of 10 Pieces

Brass ID 15mm x OD 20mm x 0.30mm PN RB015020030, Pack of 10 Pieces

Brass ID 15mm x OD 20mm x 0.50mm PN RB0015020050, Pack of 10 Pieces

Brass ID 15mm x OD 20mm x 1mm PN RB015020100, Pack of 10 Pieces

304 SST ID 15mm x OD 20mm x 0.01mm PN RS015020001, Pack of 10 Pieces

304 SST ID 15mm x OD 20mm x 0.02mm PN RS015020002, Pack of 10 Pieces

304 SST ID 15mm x OD 20mm x 0.03mm PN RS015020003, Pack of 10 Pieces

304 SST ID 15mm x OD 20mm x 0.05mm PN RS015020005, Pack of 10 Pieces

304 SST ID 15mm x OD 20mm x 0.10mm PN RS015020010, Pack of 10 Pieces

304 SST ID 15mm x OD 20mm x 0.15mm PN RS015020015, Pack of 10 Pieces

304 SST ID 15mm x OD 20mm x 0.20mm PN RS015020020, Pack of 10 Pieces

304 SST ID 15mm x OD 20mm x 0.30mm PN RS015020030, Pack of 10 Pieces

304 SST ID 15mm x OD 20mm x 0.50mm PN RS015020050, Pack of 10 Pieces

304 SST ID 15mm x OD 20mm x 1mm PN RS015020100, Pack of 10 Pieces

Material

Elora 2400-UDS 3 0.7-3.5 Nm Elometer Torque Wrench With Drag Indicator

Description:- Indicating torque wrench with dial gauge and drag indicator
for controlled tightening from 0,7 – 2800 Nm
measurement units: Nm, ft-lb or in-lb
with fixed head square Conforms to DIN 3120, ISO 1174
Elora No. 2400 UDS 1400 and 2400-UDS 2800 with additional audible buzzer
calibration accuracy of +- 3% of the set torque value. Exceeds the requirement of the norm (+-6%, respectively +- 4%) for your safety
the calibrated accuracy will be reached starting from 20% of the measuring range
classified Conforms to DIN EN ISO 6789:2003 Type I Class B, with traceable factory calibration certificate

Elora 2400-UDS 9 1.8-9 Nm Elometer Torque Wrench 1/4″ Drive

Elora 2400-UDS 18 3.6-18 Nm Elometer Torque Wrench 3/8″ Drive

Elora 2400-UDS 30 6-30 Nm Elometer Torque Wrench 3/8″ Drive

Elora 2400-UDS 70 14-70 Nm Elometer Torque Wrench 3/8″ Drive

Elora 2400-UDS 240 48-240 Nm Elometer Torque Wrench 1/2″ Drive

Elora 2400-UDS 350 70-350 Nm Elometer Torque Wrench 1/2″ Drive

Elora 2400-UDS 480 96-480 Nm Elometer Torque Wrench 3/4″ Drive

<h3>Elora 2400-UDS 3 0.7-3.5 Nm Elometer Torque Wrench With Drag Indicator</h3>
<h3>Product code: 2400000032000 </h3>
<ul>
<li>Description:- Indicating torque wrench with dial gauge and drag indicator 
for controlled tightening from 0,7 – 2800 Nm 
measurement units: Nm, ft-lb or in-lb 
with fixed head square Conforms to DIN 3120, ISO 1174 
Elora No. 2400 UDS 1400 and 2400-UDS 2800 with additional audible buzzer 
calibration accuracy of +- 3% of the set torque value. Exceeds the requirement of the norm (+-6%, respectively +- 4%) for your safety 
the calibrated accuracy will be reached starting from 20% of the measuring range 
classified Conforms to DIN EN ISO 6789:2003 Type I Class B, with traceable factory calibration certificate</li>
<li>Output Male Square:- 1/4″</li>
<li>Measuring range Nm:- 0,7-3,5</li>
<li>Measuring range in.lb.:- 11110</li>
<li>Measuring range ft.lb.:- –</li>
<li>Graduation Nm:- 0,1</li>
<li>Graduation in.lb.:- 1</li>
<li>Graduation ft.lb.:- –</li>
<li>Signal:- –</li>
<li>Length mm:- 270</li>
<li>Weight g:- 725</li>
</ul>
&nbsp;
<h3>Elora 2400-UDS 9 1.8-9 Nm Elometer Torque Wrench 1/4″ Drive</h3>
<h3>Product code: 2400000092000&nbsp;&nbsp;</h3>
<ul>
<li>Description:- Indicating torque wrench with dial gauge and drag indicator 
for controlled tightening from 0,7 – 2800 Nm 
measurement units: Nm, ft-lb or in-lb 
with fixed head square Conforms to DIN 3120, ISO 1174 
Elora No. 2400 UDS 1400 and 2400-UDS 2800 with additional audible buzzer 
calibration accuracy of +- 3% of the set torque value. Exceeds the requirement of the norm (+-6%, respectively +- 4%) for your safety 
the calibrated accuracy will be reached starting from 20% of the measuring range 
classified Conforms to DIN EN ISO 6789:2003 Type I Class B, with traceable factory calibration certificate</li>
<li>Output Male Square:- 1/4″</li>
<li>Measuring range Nm:- 1,8-9</li>
<li>Measuring range in.lb.:- 15-75</li>
<li>Measuring range ft.lb.:- –</li>
<li>Graduation Nm:- 0,2</li>
<li>Graduation in.lb.:- 1</li>
<li>Graduation ft.lb.:- –</li>
<li>Signal:- –</li>
<li>Length mm:- 270</li>
<li>Weight g:- 725</li>
</ul>
&nbsp;
<h3>Elora 2400-UDS 18 3.6-18 Nm Elometer Torque Wrench 3/8″ Drive</h3>
<h3>Product code: 2400000182000&nbsp;&nbsp;</h3>
<ul>
<li>Description:- Indicating torque wrench with dial gauge and drag indicator 
for controlled tightening from 0,7 – 2800 Nm 
measurement units: Nm, ft-lb or in-lb 
with fixed head square Conforms to DIN 3120, ISO 1174 
Elora No. 2400 UDS 1400 and 2400-UDS 2800 with additional audible buzzer 
calibration accuracy of +- 3% of the set torque value. Exceeds the requirement of the norm (+-6%, respectively +- 4%) for your safety 
the calibrated accuracy will be reached starting from 20% of the measuring range 
classified Conforms to DIN EN ISO 6789:2003 Type I Class B, with traceable factory calibration certificate</li>
<li>Output Male Square:- 3/8″</li>
<li>Measuring range Nm:- 3,6-18</li>
<li>Measuring range in.lb.:- 30-150</li>
<li>Measuring range ft.lb.:- –</li>
<li>Graduation Nm:- 0,5</li>
<li>Graduation in.lb.:- 2</li>
<li>Graduation ft.lb.:- –</li>
<li>Signal:- –</li>
<li>Length mm:- 270</li>
<li>Weight g:- 725</li>
</ul>
&nbsp;
<h3>Elora 2400-UDS 30 6-30 Nm Elometer Torque Wrench 3/8″ Drive</h3>
<h3>Product code: 2400000302000&nbsp;&nbsp;</h3>
<ul>
<li>Description:- Indicating torque wrench with dial gauge and drag indicator 
for controlled tightening from 0,7 – 2800 Nm 
measurement units: Nm, ft-lb or in-lb 
with fixed head square Conforms to DIN 3120, ISO 1174 
Elora No. 2400 UDS 1400 and 2400-UDS 2800 with additional audible buzzer 
calibration accuracy of +- 3% of the set torque value. Exceeds the requirement of the norm (+-6%, respectively +- 4%) for your safety 
the calibrated accuracy will be reached starting from 20% of the measuring range 
classified Conforms to DIN EN ISO 6789:2003 Type I Class B, with traceable factory calibration certificate</li>
<li>Output Male Square:- 3/8″</li>
<li>Measuring range Nm:- 11110</li>
<li>Measuring range in.lb.:- 50-250</li>
<li>Measuring range ft.lb.:- –</li>
<li>Graduation Nm:- 0,5</li>
<li>Graduation in.lb.:- 5</li>
<li>Graduation ft.lb.:- –</li>
<li>Signal:- –</li>
<li>Length mm:- 270</li>
<li>Weight g:- 725</li>
</ul>
&nbsp;
<h3>Elora 2400-UDS 70 14-70 Nm Elometer Torque Wrench 3/8″ Drive</h3>
<h3>Product code: 2400000702000&nbsp;&nbsp;</h3>
<ul>
<li>Description:- Indicating torque wrench with dial gauge and drag indicator 
for controlled tightening from 0,7 – 2800 Nm 
measurement units: Nm, ft-lb or in-lb 
with fixed head square Conforms to DIN 3120, ISO 1174 
Elora No. 2400 UDS 1400 and 2400-UDS 2800 with additional audible buzzer 
calibration accuracy of +- 3% of the set torque value. Exceeds the requirement of the norm (+-6%, respectively +- 4%) for your safety 
the calibrated accuracy will be reached starting from 20% of the measuring range 
classified Conforms to DIN EN ISO 6789:2003 Type I Class B, with traceable factory calibration certificate</li>
<li>Output Male Square:- 3/8″</li>
<li>Measuring range Nm:- 14-70</li>
<li>Measuring range in.lb.:- –</li>
<li>Measuring range ft.lb.:- 18537</li>
<li>Graduation Nm:- 2</li>
<li>Graduation in.lb.:- –</li>
<li>Graduation ft.lb.:- 1</li>
<li>Signal:- –</li>
<li>Length mm:- 270</li>
<li>Weight g:- 725</li>
</ul>
&nbsp;
<h3>Elora 2400-UDS 240 48-240 Nm Elometer Torque Wrench 1/2″ Drive</h3>
<h3>Product code: 2400002402000&nbsp;&nbsp;</h3>
<ul>
<li>Description:- Indicating torque wrench with dial gauge and drag indicator 
for controlled tightening from 0,7 – 2800 Nm 
measurement units: Nm, ft-lb or in-lb 
with fixed head square Conforms to DIN 3120, ISO 1174 
Elora No. 2400 UDS 1400 and 2400-UDS 2800 with additional audible buzzer 
calibration accuracy of +- 3% of the set torque value. Exceeds the requirement of the norm (+-6%, respectively +- 4%) for your safety 
the calibrated accuracy will be reached starting from 20% of the measuring range 
classified Conforms to DIN EN ISO 6789:2003 Type I Class B, with traceable factory calibration certificate</li>
<li>Output Male Square:- 1/2″</li>
<li>Measuring range Nm:- 48-240</li>
<li>Measuring range in.lb.:- –</li>
<li>Measuring range ft.lb.:- 35-175</li>
<li>Graduation Nm:- 5</li>
<li>Graduation in.lb.:- –</li>
<li>Signal:- –</li>
<li>Length mm:- 560</li>
<li>Weight g:- 1400</li>
<li>Graduation in.lb.:- 5</li>
</ul>
&nbsp;
<h3>Elora 2400-UDS 350 70-350 Nm Elometer Torque Wrench 1/2″ Drive</h3>
<h3>Product code: 2400003502000&nbsp;&nbsp;</h3>
<ul>
<li>Description:- Indicating torque wrench with dial gauge and drag indicator 
for controlled tightening from 0,7 – 2800 Nm 
measurement units: Nm, ft-lb or in-lb 
with fixed head square Conforms to DIN 3120, ISO 1174 
Elora No. 2400 UDS 1400 and 2400-UDS 2800 with additional audible buzzer 
calibration accuracy of +- 3% of the set torque value. Exceeds the requirement of the norm (+-6%, respectively +- 4%) for your safety 
the calibrated accuracy will be reached starting from 20% of the measuring range 
classified Conforms to DIN EN ISO 6789:2003 Type I Class B, with traceable factory calibration certificate</li>
<li>Output Male Square:- 1/2″</li>
<li>Measuring range Nm:- 70-350</li>
<li>Measuring range in.lb.:- –</li>
<li>Measuring range ft.lb.:- 50-250</li>
<li>Graduation Nm:- 10</li>
<li>Graduation in.lb.:- –</li>
<li>Graduation ft.lb.:- 5</li>
<li>Signal:- –</li>
<li>Length mm:- 560</li>
<li>Weight g:- 1400</li>
</ul>
&nbsp;
<h3>Elora 2400-UDS 480 96-480 Nm Elometer Torque Wrench 3/4″ Drive</h3>
<h3>Product code: 2400004802000&nbsp;&nbsp;</h3>
<ul>
<li>Description:- Indicating torque wrench with dial gauge and drag indicator 
for controlled tightening from 0,7 – 2800 Nm 
measurement units: Nm, ft-lb or in-lb 
with fixed head square Conforms to DIN 3120, ISO 1174 
Elora No. 2400 UDS 1400 and 2400-UDS 2800 with additional audible buzzer 
calibration accuracy of +- 3% of the set torque value. Exceeds the requirement of the norm (+-6%, respectively +- 4%) for your safety 
the calibrated accuracy will be reached starting from 20% of the measuring range 
classified Conforms to DIN EN ISO 6789:2003 Type I Class B, with traceable factory calibration certificate</li>
<li>Output Male Square:- 3/4″</li>
<li>Measuring range Nm:- 96-480</li>
<li>Measuring range in.lb.:- –</li>
<li>Measuring range ft.lb.:- 70-350</li>
<li>Graduation in.lb.:- –</li>
<li>Graduation ft.lb.:- 10</li>
<li>Signal:- –</li>
<li>Length mm:- 675</li>
<li>Weight g:- 3200</li>
<li>Graduation Nm:- 10</li>
</ul>
&nbsp;
<h3>Elora 2400-UDS 480 96-480 Nm Elometer Torque Wrench 3/4″ Drive</h3>
<h3>Product code: 2400004802000&nbsp;&nbsp;</h3>
<ul>
<li>Description:- Indicating torque wrench with dial gauge and drag indicator 
for controlled tightening from 0,7 – 2800 Nm 
measurement units: Nm, ft-lb or in-lb 
with fixed head square Conforms to DIN 3120, ISO 1174 
Elora No. 2400 UDS 1400 and 2400-UDS 2800 with additional audible buzzer 
calibration accuracy of +- 3% of the set torque value. Exceeds the requirement of the norm (+-6%, respectively +- 4%) for your safety 
the calibrated accuracy will be reached starting from 20% of the measuring range 
classified Conforms to DIN EN ISO 6789:2003 Type I Class B, with traceable factory calibration certificate</li>
<li>Output Male Square:- 3/4″</li>
<li>Measuring range Nm:- 96-480</li>
<li>Measuring range in.lb.:- –</li>
<li>Measuring range ft.lb.:- 70-350</li>
<li>Graduation in.lb.:- –</li>
<li>Graduation ft.lb.:- 10</li>
<li>Signal:- –</li>
<li>Length mm:- 675</li>
<li>Weight g:- 3200</li>
<li>Graduation Nm:- 10</li>
</ul>
&nbsp;
<h3>Elora 2400-UDS 800 166-800 Nm Elometer Torque Wrench 3/4″ Drive</h3>
<h3>Product code: 2400008002000&nbsp;&nbsp;</h3>
<ul>
<li>Description:- Indicating torque wrench with dial gauge and drag indicator 
for controlled tightening from 0,7 – 2800 Nm 
measurement units: Nm, ft-lb or in-lb 
with fixed head square Conforms to DIN 3120, ISO 1174 
Elora No. 2400 UDS 1400 and 2400-UDS 2800 with additional audible buzzer 
calibration accuracy of +- 3% of the set torque value. Exceeds the requirement of the norm (+-6%, respectively +- 4%) for your safety 
the calibrated accuracy will be reached starting from 20% of the measuring range 
classified Conforms to DIN EN ISO 6789:2003 Type I Class B, with traceable factory calibration certificate</li>
<li>Output Male Square:- 3/4″</li>
<li>Measuring range Nm:- 166-800</li>
<li>Measuring range in.lb.:- –</li>
<li>Measuring range ft.lb.:- 120-600</li>
<li>Graduation Nm:- 25</li>
<li>Graduation in.lb.:- –</li>
<li>Graduation ft.lb.:- 10</li>
<li>Signal:- –</li>
<li>Length mm:- 1180</li>
<li>Weight g:- 4500</li>
</ul>
&nbsp;
<h3>Elora 2400-UDS 1400 280-1400 Nm Elometer Torque Wrench 1″ Drive</h3>
<h3>Product code: 2400014002000&nbsp;&nbsp;</h3>
<ul>
<li>Description:- Indicating torque wrench with dial gauge and drag indicator 
for controlled tightening from 0,7 – 2800 Nm 
measurement units: Nm, ft-lb or in-lb 
with fixed head square Conforms to DIN 3120, ISO 1174 
Elora No. 2400 UDS 1400 and 2400-UDS 2800 with additional audible buzzer 
calibration accuracy of +- 3% of the set torque value. Exceeds the requirement of the norm (+-6%, respectively +- 4%) for your safety 
the calibrated accuracy will be reached starting from 20% of the measuring range 
classified Conforms to DIN EN ISO 6789:2003 Type I Class B, with traceable factory calibration certificate</li>
<li>Output Male Square:- 1”</li>
<li>Measuring range Nm:- 280-1400</li>
<li>Measuring range in.lb.:- –</li>
<li>Measuring range ft.lb.:- 200-1000</li>
<li>Graduation Nm:- 25</li>
<li>Graduation in.lb.:- –</li>
<li>Graduation ft.lb.:- 20</li>
<li>Signal:- optical and audible</li>
<li>Length mm:- 1970</li>
<li>Weight g:- 9000</li>
</ul>
&nbsp;
<h3>Elora 2400-UDS 2800 560-2800 Nm Elometer Torque Wrench 1″ Drive</h3>
<h3>Product code: 2400028002000&nbsp;&nbsp;</h3>
<ul>
<li>Description:- Indicating torque wrench with dial gauge and drag indicator 
for controlled tightening from 0,7 – 2800 Nm 
measurement units: Nm, ft-lb or in-lb 
with fixed head square Conforms to DIN 3120, ISO 1174 
Elora No. 2400 UDS 1400 and 2400-UDS 2800 with additional audible buzzer 
calibration accuracy of +- 3% of the set torque value. Exceeds the requirement of the norm (+-6%, respectively +- 4%) for your safety 
the calibrated accuracy will be reached starting from 20% of the measuring range 
classified Conforms to DIN EN ISO 6789:2003 Type I Class B, with traceable factory calibration certificate</li>
<li>Output Male Square:- 1”</li>
<li>Measuring range Nm:- 560-2800</li>
<li>Measuring range in.lb.:- –</li>
<li>Measuring range ft.lb.:- 400-2000</li>
<li>Graduation Nm:- 50</li>
<li>Graduation in.lb.:- –</li>
<li>Graduation ft.lb.:- 40</li>
<li>Signal:- optical and audible</li>
<li>Length mm:- 3200</li>
<li>Weight g:- 21000</li>
</ul>