SCHNEIDER ELECTRIC

Electricals

electricals

Contactors

contactors

Foot Switch

foot-switch

Monitoring Relays

monitoring-relays

RS Pro

Screw

O Ring

Surface Mount Resistors

Circular Connectors

Bolts

Panel Mount Indicators 

Junction & Enclosure Box

Electrical Wire 

Button Switch

RS Components ETH SG

buyerIntroduction

Schneider Electric LC1D098CD LC1D Series Contactor, 36 V Dc Coil, 4-Pole, 20 A, 2NO + 2NC, 300 V Dc, 690 V Ac

schneider electric lc1d098cd lc1d series contactor, 36 dc coil, 4-pole, 20 a, 2no 2nc, 300 dc, 690ac kontaktor seri lc1d, kumparan v, kutub, contactors para kontraktor penyentuh siri lc1d098cd, gegelung penghubung electric/施耐德电气 系列接触器，36 直流线圈，4 极，20 a，2no 2nc，300 直流，690 交流 接触器 施耐德电气

schneider-electric-lc1d098cd-lc1d-series-contactor-36-v-dc-coil-4-pole-20-a-2no-2nc-300-v-dc-690-v-ac

Schneider Electric CONTACTOR 25A AC3 11KW 1NO 1NC 110VAC COIL

New TeSys D Green increase TeSys D range with a new electronic coil with up to 80% less consumption than TeSys D standard AC or DC coil

New and patented TeSys D with Everlink termination technology available on 40A to 65A contactors and overload relays

Eliminates the time-consuming process of selecting tested combinations through web sites and spreadsheets.

3-pole and 4-pole contactor versions available

All contactors include built-in auxiliary contacts

All screw connections have IP20 finger-safe terminals with both North American and International terminal markings

TeSys D contactors can be panel mounted with screws or DIN rail mounted

TeSys D Green contactor simplify your maintenance services with 90% less references needed.TeSys D Green contactor associated with TeSys LR9D electronic overload relay reduces heat generation and energy consumption up to 50%

High-fault short circuit current ratings provide the flexibility to select any component, as long as it meets or exceeds the desired SCCR

TeSys D contactors are available with AC or DC operating coils

A choice of wiring connections, including spring terminals, ring tongue terminals, slip-on terminals and screw clamps, provides flexibility in meeting specific, application requirements

Class 10 or Class 20 bimetallic overload relays are available up to 140 A

Available with or without single-phase sensitivity for phase unbalance and phase loss protection

New solid state overload relays are available for 90 to 150 A application

Auxiliary Contact 1 NO, 1 NC
Contact Configuration 3 NO
Contact Current Rating 25 A
Control Voltage 110 VAC
Depth 0.079" (2mm)
Dimensions 85 x 45 x 92 mm
Enclosure Type IP2x
Horsepower Rating 20 HP
Length 3.346" (85mm)
Maximum Operating Temperature  60 C
Minimum Operating Temperature  -5 C
Mounting Type DIN Rail Mounted ; Panel Mounted
Number of Poles 3 Pole
Power Rating 15 kW
Primary Type Contactor

Size : 85 H x 45 W x 92 Dia. mm
Standards : CSA C22.2 No. 14 ; EN 60947-4-1 ; EN 60947-5-1 ; IEC 60947-4-1 ; IEC 60947-5-1 ; UL 508
Temperature Operating Range: -5 to 60 C
Terminal Type : Box Clamp
UPC Code: 785901207139
Voltage Rating: 690 VAC, 300 VDC
Width : 1.772" 45mm

<h3 class="md-block-header-three">Schneider Electric CONTACTOR 25A AC3 11KW 1NO 1NC 110VAC COIL</h3><ul class="md-block-unordered-list-item"><li>New TeSys D Green increase TeSys D range with a new electronic coil with up to 80% less consumption than TeSys D standard AC or DC coil</li><li>New and patented TeSys D with Everlink termination technology available on 40A to 65A contactors and overload relays</li><li>Eliminates the time-consuming process of selecting tested combinations through web sites and spreadsheets.</li><li>Simple to select the right product</li><li>3-pole and 4-pole contactor versions available</li><li>All contactors include built-in auxiliary contacts</li><li>All screw connections have IP20 finger-safe terminals with both North American and International terminal markings</li><li>TeSys D contactors can be panel mounted with screws or DIN rail mounted</li><li>TeSys D Green contactor simplify your maintenance services with 90% less references needed.TeSys D Green contactor associated with TeSys LR9D electronic overload relay reduces heat generation and energy consumption up to 50%</li><li>High-fault short circuit current ratings provide the flexibility to select any component, as long as it meets or exceeds the desired SCCR</li><li>TeSys D contactors are available with AC or DC operating coils</li><li>A choice of wiring connections, including spring terminals, ring tongue terminals, slip-on terminals and screw clamps, provides flexibility in meeting specific, application requirements</li><li>Class 10 or Class 20 bimetallic overload relays are available up to 140 A</li><li>Available with or without single-phase sensitivity for phase unbalance and phase loss protection</li><li>New solid state overload relays are available for 90 to 150 A application</li></ul>Auxiliary Contact 1 NO, 1 NC Contact Configuration 3 NO Contact Current Rating 25 A Control Voltage 110 VAC Depth 0.079&quot; (2mm) Dimensions 85 x 45 x 92 mm Enclosure Type IP2x Horsepower Rating 20 HP Length 3.346&quot; (85mm) Maximum Operating Temperature 60 C Minimum Operating Temperature -5 C Mounting Type DIN Rail Mounted ; Panel Mounted Number of Poles 3 Pole Power Rating 15 kW Primary Type ContactorSize : 85 H x 45 W x 92 Dia. mm Standards : CSA C22.2 No. 14 ; EN 60947-4-1 ; EN 60947-5-1 ; IEC 60947-4-1 ; IEC 60947-5-1 ; UL 508 Temperature Operating Range: -5 to 60 C Terminal Type : Box Clamp UPC Code: 785901207139 Voltage Rating: 690 VAC, 300 VDC Width : 1.772&quot; 45mm

<h3>Schneider Electric CONTACTOR 25A AC3 11KW 1NO 1NC 110VAC COIL</h3>
<ul>
<li>New TeSys D Green increase TeSys D range with a new electronic coil with up to 80% less consumption than TeSys D standard AC or DC coil</li>
<li>New and patented TeSys D with Everlink termination technology available on 40A to 65A contactors and overload relays</li>
<li>Eliminates the time-consuming process of selecting tested combinations through web sites and spreadsheets.</li>
<li>Simple to select the right product</li>
<li>3-pole and 4-pole contactor versions available</li>
<li>All contactors include built-in auxiliary contacts</li>
<li>All screw connections have IP20 finger-safe terminals with both North American and International terminal markings</li>
<li>TeSys D contactors can be panel mounted with screws or DIN rail mounted</li>
<li>TeSys D Green contactor simplify your maintenance services with 90% less references needed.TeSys D Green contactor associated with TeSys LR9D electronic overload relay reduces heat generation and energy consumption up to 50%</li>
<li>High-fault short circuit current ratings provide the flexibility to select any component, as long as it meets or exceeds the desired SCCR</li>
<li>TeSys D contactors are available with AC or DC operating coils</li>
<li>A choice of wiring connections, including spring terminals, ring tongue terminals, slip-on terminals and screw clamps, provides flexibility in meeting specific, application requirements</li>
<li>Class 10 or Class 20 bimetallic overload relays are available up to 140 A</li>
<li>Available with or without single-phase sensitivity for phase unbalance and phase loss protection</li>
<li>New solid state overload relays are available for 90 to 150 A application</li>
</ul>
Auxiliary Contact 1 NO, 1 NC 
Contact Configuration 3 NO 
Contact Current Rating 25 A 
Control Voltage 110 VAC 
Depth 0.079" (2mm) 
Dimensions 85 x 45 x 92 mm 
Enclosure Type IP2x 
Horsepower Rating 20 HP 
Length 3.346" (85mm) 
Maximum Operating Temperature 60 C 
Minimum Operating Temperature -5 C 
Mounting Type DIN Rail Mounted ; Panel Mounted 
Number of Poles 3 Pole 
Power Rating 15 kW 
Primary Type Contactor
Size : 85 H x 45 W x 92 Dia. mm 
Standards : CSA C22.2 No. 14 ; EN 60947-4-1 ; EN 60947-5-1 ; IEC 60947-4-1 ; IEC 60947-5-1 ; UL 508 
Temperature Operating Range: -5 to 60 C 
Terminal Type : Box Clamp 
UPC Code: 785901207139 
Voltage Rating: 690 VAC, 300 VDC 
Width : 1.772" 45mm

Jimmy Foo

Philips

Thomas & Betts

BRADY

Bussmann

Weidmuller

FUJI

Crouse-Hinds

Circuit Breaker

Fuses & Fusegear

Plugs & Connector 

Light Bulbs

Led Lights

Other Electrical Accessories

Light Tubes

Doreen Tan

Schneider Electric Contactor 25A AC3 11KW 110VAC Coil

schneider electric contactor 25a ac3 11kw 110vac coil kontaktor listrik contactors para kontraktor penyentuh elektrik gegelung penghubung electric/施耐德电气 接触器 线圈 施耐德电气

schneider-electric-contactor-25a-ac3-11kw-110vac-coil

Schneider Electric XPER711 Single Foot Switch, Harmony Xpe, Metal, Orange, With Cover, Trigger Mechanism, 2 Steps, 2 Contacts 1NC+NO, IP66

 
This Harmony XPER711 is a single foot switch. Its degree of protection is IP66. It has a cover, metallic material, orange color, 2 NC + 2 NO contacts. It is part of the range Harmony XPE foot switches - Control and signaling units for safety applications.  

Trigger mechanism: With trigger mechanism

Positive opening: With conforming to IEC 60947-5-1 appendix K

Screw clamp terminal, <= 1 x 2.5 mm² with or without cable end

Screw clamp terminal, <= 2 x 1.5 mm² with or without cable end

Cable entry: 2 entries tapped for Pg 16 cable gland

0.27 A, 250 V, DC-13, Q300 conforming to IEC 60947-5-1 appendix A

500 V (pollution degree 3) conforming to IEC 60947-1

500 V (pollution degree 3) conforming to NF C 20-040 group C

500 V (pollution degree 3) conforming to VDE 0110 group C

Rated impulse withstand voltage ([Uimp]): 6 kV conforming to IEC 60947-1

25 MOhm conforming to IEC 60255-7 category 3

25 MOhm conforming to NF C 93-050 method A

10 A cartridge fuse type gG conforming to IEC 60947-5-1

10 A cartridge fuse type gG conforming to VDE 0660-200 

10 W DC-13, operating rate <60 cyc/mn, 5,000,000 cycles, 24 V, load factor: 0.5 conforming to IEC 60947-5-1 appendix C

4 W DC-13, operating rate <60 cyc/mn, 5,000,000 cycles, 120 V, load factor: 0.5 conforming to IEC 60947-5-1 appendix C

7 W DC-13, operating rate <60 cyc/mn, 5,000,000 cycles, 48 V, load factor: 0.5 conforming to IEC 60947-5-1 appendix C

Vibration resistance: 15 gn (f= 10…500 Hz) conforming to IEC 60068-2-6

Shock resistance: 150 gn conforming to NF E 09-031, 20 gn conforming to IEC 60068-2-27

<h3 class="md-block-header-three">Schneider Electric XPER711 Single Foot Switch, Harmony Xpe, Metal, Orange, With Cover, Trigger Mechanism, 2 Steps, 2 Contacts 1NC+NO, IP66</h3> This Harmony XPER711 is a single foot switch. Its degree of protection is IP66. It has a cover, metallic material, orange color, 2 NC + 2 NO contacts. It is part of the range Harmony XPE foot switches - Control and signaling units for safety applications. Main:<ul class="md-block-unordered-list-item"><li>Range of product: Harmony XPE</li><li>Product or component type: Foot switch</li><li>Material: Metal</li><li>Foot switch type: Single foot switch</li><li>Device short name: XPER</li><li>Provided equipment: Cover</li><li>Trigger mechanism: With trigger mechanism</li><li>Contact operation: 2 steps</li><li>Contacts type and composition: 2 NC + NO</li><li>Colour: Orange </li></ul>Complementary: <ul class="md-block-unordered-list-item"><li>Positive opening: With conforming to IEC 60947-5-1 appendix K</li><li>Connections - Terminals:</li><ul class="md-block-unordered-list-item"><li>Screw clamp terminal, &lt;= 1 x 2.5 mm² with or without cable end</li><li>Screw clamp terminal, &lt;= 2 x 1.5 mm² with or without cable end</li></ul><li>Cable entry: 2 entries tapped for Pg 16 cable gland</li><li>Mechanical Durability: 15,000,000 cycles</li><li>Rated operational current ([Ie]):</li><ul class="md-block-unordered-list-item"><li>3 A, 240 V, AC-15, A300</li><li>0.27 A, 250 V, DC-13, Q300 conforming to IEC 60947-5-1 appendix A</li></ul><li>Rated insulation voltage ([Ui]):</li><ul class="md-block-unordered-list-item"><li>500 V (pollution degree 3) conforming to IEC 60947-1</li><li>500 V (pollution degree 3) conforming to NF C 20-040 group C</li><li>500 V (pollution degree 3) conforming to VDE 0110 group C</li><li>300 V conforming to UL 508</li><li>300 V conforming to CSA C22.2 No 14 </li></ul><li>Rated impulse withstand voltage ([Uimp]): 6 kV conforming to IEC 60947-1</li><li>Maximum resistance across terminals:</li><ul class="md-block-unordered-list-item"><li>25 MOhm conforming to IEC 60255-7 category 3</li><li>25 MOhm conforming to NF C 93-050 method A</li></ul><li>Short-circuit protection: </li><ul class="md-block-unordered-list-item"><li>10 A cartridge fuse type gG conforming to IEC 60947-5-1</li><li>10 A cartridge fuse type gG conforming to VDE 0660-200 </li></ul><li>Rated operational power in W:</li><ul class="md-block-unordered-list-item"><li>10 W DC-13, operating rate &lt;60 cyc/mn, 5,000,000 cycles, 24 V, load factor: 0.5 conforming to IEC 60947-5-1 appendix C</li><li>4 W DC-13, operating rate &lt;60 cyc/mn, 5,000,000 cycles, 120 V, load factor: 0.5 conforming to IEC 60947-5-1 appendix C</li><li>7 W DC-13, operating rate &lt;60 cyc/mn, 5,000,000 cycles, 48 V, load factor: 0.5 conforming to IEC 60947-5-1 appendix C</li></ul><li>Net weight: 2.59 kg</li></ul>Environment:<ul class="md-block-unordered-list-item"><li>Standards: NF E 09-031</li><li>Product certifications: FIMKO</li><li>Protective treatment: TC</li><li>Ambient air temperature:</li><ul class="md-block-unordered-list-item"><li>Operation: -25…70 °C</li><li>Storage: -40…70 °C</li></ul><li>Vibration resistance: 15 gn (f= 10…500 Hz) conforming to IEC 60068-2-6</li><li>Shock resistance: 150 gn conforming to NF E 09-031, 20 gn conforming to IEC 60068-2-27</li><li>Overvoltage category: </li><ul class="md-block-unordered-list-item"><li>Class I conforming to IEC 61140</li><li>Class I conforming to NF C 20-030 </li></ul><li>IP degree of protection:</li><ul class="md-block-unordered-list-item"><li>IP66 conforming to IEC 60529</li><li>IP669 conforming to IEC 60529</li></ul></ul>

<h3>Schneider Electric XPER711 Single Foot Switch, Harmony Xpe, Metal, Orange, With Cover, Trigger Mechanism, 2 Steps, 2 Contacts 1NC+NO, IP66</h3>
&nbsp; 
This Harmony XPER711 is a single foot switch. Its degree of protection is IP66. It has a cover, metallic material, orange color, 2 NC + 2 NO contacts. It is part of the range Harmony XPE foot switches - Control and signaling units for safety applications.&nbsp;&nbsp;
Main:
<ul>
<li>Range of product: Harmony XPE</li>
<li>Product or component type: Foot switch</li>
<li>Material: Metal</li>
<li>Foot switch type: Single foot switch</li>
<li>Device short name: XPER</li>
<li>Provided equipment: Cover</li>
<li>Trigger mechanism: With trigger mechanism</li>
<li>Contact operation: 2 steps</li>
<li>Contacts type and composition: 2 NC + NO</li>
<li>Colour: Orange 
</li>
</ul>
Complementary:&nbsp;
<ul>
<li>Positive opening: With conforming to IEC 60947-5-1 appendix K</li>
<li>Connections - Terminals:</li>
<ul>
<li>Screw clamp terminal, &lt;= 1 x 2.5 mm² with or without cable end</li>
<li>Screw clamp terminal, &lt;= 2 x 1.5 mm² with or without cable end</li>
</ul>
<li>Cable entry: 2 entries tapped for Pg 16 cable gland</li>
<li>Mechanical Durability: 15,000,000 cycles</li>
<li>Rated operational current ([Ie]):</li>
<ul>
<li>3 A, 240 V, AC-15, A300</li>
<li>0.27 A, 250 V, DC-13, Q300 conforming to IEC 60947-5-1 appendix A</li>
</ul>
<li>Rated insulation voltage ([Ui]):</li>
<ul>
<li>500 V (pollution degree 3) conforming to IEC 60947-1</li>
<li>500 V (pollution degree 3) conforming to NF C 20-040 group C</li>
<li>500 V (pollution degree 3) conforming to VDE 0110 group C</li>
<li>300 V conforming to UL 508</li>
<li>300 V conforming to CSA C22.2 No 14&nbsp;</li>
</ul>
<li>Rated impulse withstand voltage ([Uimp]): 6 kV conforming to IEC 60947-1</li>
<li>Maximum resistance across terminals:</li>
<ul>
<li>25 MOhm conforming to IEC 60255-7 category 3</li>
<li>25 MOhm conforming to NF C 93-050 method A</li>
</ul>
<li>Short-circuit protection:&nbsp;&nbsp;</li>
<ul>
<li>10 A cartridge fuse type gG conforming to IEC 60947-5-1</li>
<li>10 A cartridge fuse type gG conforming to VDE 0660-200&nbsp;</li>
</ul>
<li>Rated operational power in W:</li>
<ul>
<li>10 W DC-13, operating rate &lt;60 cyc/mn, 5,000,000 cycles, 24 V, load factor: 0.5 conforming to IEC 60947-5-1 appendix C</li>
<li>4 W DC-13, operating rate &lt;60 cyc/mn, 5,000,000 cycles, 120 V, load factor: 0.5 conforming to IEC 60947-5-1 appendix C</li>
<li>7 W DC-13, operating rate &lt;60 cyc/mn, 5,000,000 cycles, 48 V, load factor: 0.5 conforming to IEC 60947-5-1 appendix C</li>
</ul>
<li>Net weight: 2.59 kg</li>
</ul>
Environment:
<ul>
<li>Standards: NF E 09-031</li>
<li>Product certifications: FIMKO</li>
<li>Protective treatment: TC</li>
<li>Ambient air temperature:</li>
<ul>
<li>Operation: -25…70 °C</li>
<li>Storage: -40…70 °C</li>
</ul>
<li>Vibration resistance: 15 gn (f= 10…500 Hz) conforming to IEC 60068-2-6</li>
<li>Shock resistance: 150 gn conforming to NF E 09-031, 20 gn conforming to IEC 60068-2-27</li>
<li>Overvoltage category:&nbsp;</li>
<ul>
<li>Class I conforming to IEC 61140</li>
<li>Class I conforming to NF C 20-030&nbsp;</li>
</ul>
<li>IP degree of protection:</li>
<ul>
<li>IP66 conforming to IEC 60529</li>
<li>IP669 conforming to IEC 60529</li>
</ul>
</ul>

Product Datasheet

Instruction sheet

Catalogue

Environmental disclosure

APC by Schneider Electric

CLIPSAL

Square D

Telemecanique

Pilot Lights

Light Switches

Miniature Circuit Breakers - MCBs

Uninterruptible Power Supply 

Molded Case Circuit Breakers - MCCBs

EasyPact Circuit Breakers 

Standby battery 

Overload Relays

Schneider

schneider electric xper711 single foot switch, harmony xpe, metal, orange, cover, trigger mechanism, steps, contacts 1nc+no, ip66 sakelar kaki tunggal, logam, oranye, dengan penutup, mekanisme pemicu, langkah, kontak switch suis harmoni jingga, pencetus, kenalan electric/施耐德电气 单脚踏开关，harmony xpe，金属，橙色，带盖，触发机制，2 步，2 触点 1nc+no，ip66 施耐德电气

schneider-electric-xper711-single-foot-switch-harmony-xpe-metal-orange-with-cover-trigger-mechanism-2-steps-2-contacts-1nc-no-ip66

Abb BC7-30-10-01 Contactor Mini 24VDC 3P 3NO

Catalog Description:BC7-30-10-01 Mini Contactor 24 V DC - 3 NO - 0 NC - Screw Terminals

Long Description:The BC7-30-10 mini contactor is a compact 3 pole contactor with 1 auxiliary contact and screw terminals. They are ideally suited for applications where reliability is a must and space is at a premium. Mini contactors are used in residential buldings, commercial buildings and industrial applications for the control of single or three-phase loads up to 5.5 kW (AC-3) and 20 A / 690 V (AC-1) or switching of control signals. Further features are the noiseless and hum-free coil, a switch position indication and the integrated possibility for rail or wall mounting.

Rated Operational Voltage:Auxiliary Circuit 690 V AC

Rated Impulse Withstand Voltage (Uimp):Auxiliary Circuit 6 kV

Rated Operational Current AC-1 (Ie):(220 / 240 V) 40 °C 20 A

Rated Operational Power AC-3 (Pe):(230 V) Three Phase 3 kW

Rated Short-time Withstand Current Low Voltage (Icw):at 40 °C Ambient Temp, in Free Air, from a Cold State 10 s 96 A

Rated Operational Current AC-15 (Ie):(24 V) 4 A

Rated Operational Current DC-13 (Ie):(24 V) 2.5 A

Conventional Free-air Thermal Current (Ith):Main Circuit 20 A

Rated Control Circuit Voltage (Uc):24 V DC

Coil Operating Limits:(acc. to IEC 60947-4-1) for DC supply 0.85 ... 1.1 x Uc (at θ ≤ 55 °C)

Degree of Protection:Auxiliary Circuit Terminals IP20

Minimum Switching Capacity:Auxiliary Circuit 17 V

Maximum Electrical Switching Frequency:(AC-1) 300 cycles per hour

Connecting Capacity Main Circuit:Flexible with Ferrule 1/2x 1 ... 2.5 mm²

Flexible with Insulated Ferrule 1/2x 1 ... 2.5 mm²

Connecting Capacity Auxiliary Circuit:Flexible with Ferrule 1/2x 1 ... 2.5 mm²

Connecting Capacity Control Circuit:Flexible with Ferrule 1/2x 1 ... 2.5 mm²

Wire Stripping Length:Auxiliary Circuit 9 mm

Tightening Torque:Auxiliary Circuit 0.8 ... 1.1 N·m

Mounting on DIN Rail:TH35-15 (35 x 15 mm Mounting Rail) acc. to IEC 60715

TH35-7.5 (35 x 7.5 mm Mounting Rail) acc. to IEC 60715

Power Loss:at Rated Operating Conditions per Pole 2 W

at Rated Operating Conditions AC-1 per Pole 1.4 W

<h3 class="md-block-header-three">Abb BC7-30-10-01 Contactor Mini 24VDC 3P 3NO</h3> <ul class="md-block-unordered-list-item"><li>Extended Product Type:BC7-30-10-01</li><li>Product ID:GJL1313001R0101</li><li>EAN:4013614150159</li><li>Catalog Description:BC7-30-10-01 Mini Contactor 24 V DC - 3 NO - 0 NC - Screw Terminals</li><li>Long Description:The BC7-30-10 mini contactor is a compact 3 pole contactor with 1 auxiliary contact and screw terminals. They are ideally suited for applications where reliability is a must and space is at a premium. Mini contactors are used in residential buldings, commercial buildings and industrial applications for the control of single or three-phase loads up to 5.5 kW (AC-3) and 20 A / 690 V (AC-1) or switching of control signals. Further features are the noiseless and hum-free coil, a switch position indication and the integrated possibility for rail or wall mounting.</li><li>Number of Poles:3</li><li>Mini Contactor Type:Mini Contactor</li><li>Rated Operational Voltage:Auxiliary Circuit 690 V AC</li><li>Auxiliary Circuit 250 V DC</li><li>Main Circuit 690 V AC</li><li>Main Circuit 220 V DC</li><li>Rated Frequency (f):Control Circuit DC</li><li>Main Circuit 60 Hz</li><li>Main Circuit 50 Hz</li><li>Main Circuit DC</li><li>Rated Impulse Withstand Voltage (Uimp):Auxiliary Circuit 6 kV</li><li>Main Circuit 6 kV</li><li>Rated Insulation Voltage (Ui):690 V</li><li>acc. to UL/CSA 600 V</li><li>Number of Main Contacts NC:0</li><li>Number of Main Contacts NO:3</li><li>Rated Operational Current AC-1 (Ie):(220 / 240 V) 40 °C 20 A</li><li>(220 / 240 V) 55 °C 16 A</li><li>(380 / 440 V) 40 °C 20 A</li><li>(380 / 440 V) 55 °C 16 A</li><li>(690 V) 40 °C 6 A</li><li>(690 V) 55 °C 6 A</li><li>Rated Operational Power AC-3 (Pe):(230 V) Three Phase 3 kW</li><li>(400 V) Three Phase 5.5 kW</li><li>(500 V) Three Phase 5.5 kW</li><li>(690 V) Three Phase, NO 3 kW</li><li>Rated Short-time Withstand Current Low Voltage (Icw):at 40 °C Ambient Temp, in Free Air, from a Cold State 10 s 96 A</li><li>Number of Auxiliary Contacts NC:0</li><li>Number of Auxiliary Contacts NO:1</li><li>Rated Operational Current AC-15 (Ie):(24 V) 4 A</li><li>(120 V) 4 A</li><li>(500 V) 2 A</li><li>(220 / 240 V) 4 A</li><li>(380 / 400 V) 3 A</li><li>Rated Operational Current DC-13 (Ie):(24 V) 2.5 A</li><li>(110 V) 0.7 A</li><li>(220 / 240 V) 0.4 A</li><li>Conventional Free-air Thermal Current (Ith):Main Circuit 20 A</li><li>Rated Control Circuit Voltage (Uc):24 V DC</li><li>Coil Operating Limits:(acc. to IEC 60947-4-1) for DC supply 0.85 ... 1.1 x Uc (at θ ≤ 55 °C)</li><li>Degree of Protection:Auxiliary Circuit Terminals IP20</li><li>Control Circuit Terminals IP20</li><li>Main Circuit Terminals IP20</li><li>Mechanical Durability:10000000 cycle</li><li>Minimum Switching Capacity:Auxiliary Circuit 17 V</li><li>Auxiliary Circuit 5 mA</li><li>Maximum Electrical Switching Frequency:(AC-1) 300 cycles per hour</li><li>(AC-15) 600 cycles per hour</li><li>(AC-3) 600 cycles per hour</li><li>(DC-1) 600 cycles per hour</li><li>(DC-13) 600 cycles per hour</li><li>(DC-3) 600 cycles per hour</li><li>Connecting Capacity Main Circuit:Flexible with Ferrule 1/2x 1 ... 2.5 mm²</li><li>Flexible with Insulated Ferrule 1/2x 1 ... 2.5 mm²</li><li>Flexible 1/2x 1 ... 2.5 mm²</li><li>Rigid 1/2x 1 ... 4 mm²</li><li>Connecting Capacity Auxiliary Circuit:Flexible with Ferrule 1/2x 1 ... 2.5 mm²</li><li>Flexible with Insulated Ferrule 1/2x 1 ... 2.5 mm²</li><li>Flexible 1/2x 1 ... 2.5 mm²</li><li>Rigid 1/2x 1 ... 4 mm²</li><li>Connecting Capacity Control Circuit:Flexible with Ferrule 1/2x 1 ... 2.5 mm²</li><li>Flexible with Insulated Ferrule 1/2x 1 ... 2.5 mm²</li><li>Flexible 1/2x 1 ... 2.5 mm²</li><li>Rigid 1/2x 1 ... 4 mm²</li><li>Wire Stripping Length:Auxiliary Circuit 9 mm</li><li>Main Circuit 9 mm</li><li>Tightening Torque:Auxiliary Circuit 0.8 ... 1.1 N·m</li><li>Control Circuit 0.8 ... 1.1 N·m</li><li>Main Circuit 0.8 ... 1.1 N·m</li><li>Recommended Screw Driver:M3</li><li>Pozidriv 1</li><li>Mounting on DIN Rail:TH35-15 (35 x 15 mm Mounting Rail) acc. to IEC 60715</li><li>TH35-7.5 (35 x 7.5 mm Mounting Rail) acc. to IEC 60715</li><li>Power Loss:at Rated Operating Conditions per Pole 2 W</li><li>at Rated Operating Conditions AC-1 per Pole 1.4 W</li><li>Standards:IEC/EN 60947-1</li><li>IEC/EN 60947-4-1</li><li>IEC/EN 60947-5-1</li><li>UL 60947-1</li><li>UL 60947-4-1</li><li>Unit of Measurement : Pcs</li></ul>

<h3>Abb BC7-30-10-01 Contactor Mini 24VDC 3P 3NO</h3>
&nbsp;&nbsp;
<ul>
<li>Extended Product Type:BC7-30-10-01</li>
<li>Product ID:GJL1313001R0101</li>
<li>EAN:4013614150159</li>
<li>Catalog Description:BC7-30-10-01 Mini Contactor 24 V DC - 3 NO - 0 NC - Screw Terminals</li>
<li>Long Description:The BC7-30-10 mini contactor is a compact 3 pole contactor with 1 auxiliary contact and screw terminals. They are ideally suited for applications where reliability is a must and space is at a premium. Mini contactors are used in residential buldings, commercial buildings and industrial applications for the control of single or three-phase loads up to 5.5 kW (AC-3) and 20 A / 690 V (AC-1) or switching of control signals. Further features are the noiseless and hum-free coil, a switch position indication and the integrated possibility for rail or wall mounting.</li>
<li>Number of Poles:3</li>
<li>Mini Contactor Type:Mini Contactor</li>
<li>Rated Operational Voltage:Auxiliary Circuit 690 V AC</li>
<li>Auxiliary Circuit 250 V DC</li>
<li>Main Circuit 690 V AC</li>
<li>Main Circuit 220 V DC</li>
<li>Rated Frequency (f):Control Circuit DC</li>
<li>Main Circuit 60 Hz</li>
<li>Main Circuit 50 Hz</li>
<li>Main Circuit DC</li>
<li>Rated Impulse Withstand Voltage (Uimp):Auxiliary Circuit 6 kV</li>
<li>Main Circuit 6 kV</li>
<li>Rated Insulation Voltage (Ui):690 V</li>
<li>acc. to UL/CSA 600 V</li>
<li>Number of Main Contacts NC:0</li>
<li>Number of Main Contacts NO:3</li>
<li>Rated Operational Current AC-1 (Ie):(220 / 240 V) 40 °C 20 A</li>
<li>(220 / 240 V) 55 °C 16 A</li>
<li>(380 / 440 V) 40 °C 20 A</li>
<li>(380 / 440 V) 55 °C 16 A</li>
<li>(690 V) 40 °C 6 A</li>
<li>(690 V) 55 °C 6 A</li>
<li>Rated Operational Power AC-3 (Pe):(230 V) Three Phase 3 kW</li>
<li>(400 V) Three Phase 5.5 kW</li>
<li>(500 V) Three Phase 5.5 kW</li>
<li>(690 V) Three Phase, NO 3 kW</li>
<li>Rated Short-time Withstand Current Low Voltage (Icw):at 40 °C Ambient Temp, in Free Air, from a Cold State 10 s 96 A</li>
<li>Number of Auxiliary Contacts NC:0</li>
<li>Number of Auxiliary Contacts NO:1</li>
<li>Rated Operational Current AC-15 (Ie):(24 V) 4 A</li>
<li>(120 V) 4 A</li>
<li>(500 V) 2 A</li>
<li>(220 / 240 V) 4 A</li>
<li>(380 / 400 V) 3 A</li>
<li>Rated Operational Current DC-13 (Ie):(24 V) 2.5 A</li>
<li>(110 V) 0.7 A</li>
<li>(220 / 240 V) 0.4 A</li>
<li>Conventional Free-air Thermal Current (Ith):Main Circuit 20 A</li>
<li>Rated Control Circuit Voltage (Uc):24 V DC</li>
<li>Coil Operating Limits:(acc. to IEC 60947-4-1) for DC supply 0.85 ... 1.1 x Uc (at θ ≤ 55 °C)</li>
<li>Degree of Protection:Auxiliary Circuit Terminals IP20</li>
<li>Control Circuit Terminals IP20</li>
<li>Main Circuit Terminals IP20</li>
<li>Mechanical Durability:10000000 cycle</li>
<li>Minimum Switching Capacity:Auxiliary Circuit 17 V</li>
<li>Auxiliary Circuit 5 mA</li>
<li>Maximum Electrical Switching Frequency:(AC-1) 300 cycles per hour</li>
<li>(AC-15) 600 cycles per hour</li>
<li>(AC-3) 600 cycles per hour</li>
<li>(DC-1) 600 cycles per hour</li>
<li>(DC-13) 600 cycles per hour</li>
<li>(DC-3) 600 cycles per hour</li>
<li>Connecting Capacity Main Circuit:Flexible with Ferrule 1/2x 1 ... 2.5 mm²</li>
<li>Flexible with Insulated Ferrule 1/2x 1 ... 2.5 mm²</li>
<li>Flexible 1/2x 1 ... 2.5 mm²</li>
<li>Rigid 1/2x 1 ... 4 mm²</li>
<li>Connecting Capacity Auxiliary Circuit:Flexible with Ferrule 1/2x 1 ... 2.5 mm²</li>
<li>Flexible with Insulated Ferrule 1/2x 1 ... 2.5 mm²</li>
<li>Flexible 1/2x 1 ... 2.5 mm²</li>
<li>Rigid 1/2x 1 ... 4 mm²</li>
<li>Connecting Capacity Control Circuit:Flexible with Ferrule 1/2x 1 ... 2.5 mm²</li>
<li>Flexible with Insulated Ferrule 1/2x 1 ... 2.5 mm²</li>
<li>Flexible 1/2x 1 ... 2.5 mm²</li>
<li>Rigid 1/2x 1 ... 4 mm²</li>
<li>Wire Stripping Length:Auxiliary Circuit 9 mm</li>
<li>Main Circuit 9 mm</li>
<li>Tightening Torque:Auxiliary Circuit 0.8 ... 1.1 N·m</li>
<li>Control Circuit 0.8 ... 1.1 N·m</li>
<li>Main Circuit 0.8 ... 1.1 N·m</li>
<li>Recommended Screw Driver:M3</li>
<li>Pozidriv 1</li>
<li>Mounting on DIN Rail:TH35-15 (35 x 15 mm Mounting Rail) acc. to IEC 60715</li>
<li>TH35-7.5 (35 x 7.5 mm Mounting Rail) acc. to IEC 60715</li>
<li>Power Loss:at Rated Operating Conditions per Pole 2 W</li>
<li>at Rated Operating Conditions AC-1 per Pole 1.4 W</li>
<li>Standards:IEC/EN 60947-1</li>
<li>IEC/EN 60947-4-1</li>
<li>IEC/EN 60947-5-1</li>
<li>UL 60947-1</li>
<li>UL 60947-4-1</li>
<li>Unit of Measurement : Pcs</li>
</ul>

abb bc7-30-10-01 contactor mini 24vdc 3p 3no kontaktor contactors para kontraktor penyentuh penghubung bc7-30-10-01接触器迷你24vdc 接触器

abb-bc7-30-10-01-contactor-mini-24vdc-3p-3no

Catalog Description:CM-PFS.S Three-phase monitoring relay 2c/o, L1-L2-L3=200-500VAC 50/60Hz

Long Description:The CM-PFS.S relay is from the CM three-phase monitors range. This relay operates with a rated control supply voltage / three-phase measuring voltage of 200-500 V AC and has a 2 c/o output with contacts rated at 250 V / 4 A. The CM-PFS.S monitors the phase loss and phase sequence. The corresponding threshold values are fixed. The device offers screw connection technology with double-chamber cage connection terminals.

Rated Control Supply Voltage (Us):(L-L) 200 ... 500 V AC

Rated Frequency (f):Supply Circuit 50/60 Hz

Rated Operational Current AC-12 (Ie):(230 V) 4 A

Rated Operational Current AC-15 (Ie):(230 V) 3 A

Rated Operational Current DC-12 (Ie):(24 V) 4 A

Rated Operational Current DC-13 (Ie):(24 V) 2 A

Rated Impulse Withstand Voltage (Uimp):Input Circuit 6 kV

Rated Insulation Voltage (Ui):Input Circuit / Output Circuit 600 V

Output Circuit 1 / Output Circuit 2 300 V

Short-Circuit Protective Devices:Output Circuit NC - F Type Fuses 6 A

Connecting Capacity:Flexible with Ferrule 1x 0.5 ... 2.5 mm²

Flexible with Ferrule 2x 0.5 ... 1.5 mm²

Flexible with Insulated Ferrule 1x 0.5 ... 2.5 mm²

Flexible with Insulated Ferrule 2x 0.5 ... 1.5 mm²

<h3 class="md-block-header-three">Abb CM-PFS.S Relay Monitoring 3PHASE</h3> <ul class="md-block-unordered-list-item"><li>Extended Product Type:CM-PFS.S</li><li>Product ID:1SVR730824R9300</li><li>EAN:4016779851947</li><li>Catalog Description:CM-PFS.S Three-phase monitoring relay 2c/o, L1-L2-L3=200-500VAC 50/60Hz</li><li>Long Description:The CM-PFS.S relay is from the CM three-phase monitors range. This relay operates with a rated control supply voltage / three-phase measuring voltage of 200-500 V AC and has a 2 c/o output with contacts rated at 250 V / 4 A. The CM-PFS.S monitors the phase loss and phase sequence. The corresponding threshold values are fixed. The device offers screw connection technology with double-chamber cage connection terminals.</li><li>Unit of Measurement : Pcs</li></ul>Technical<ul class="md-block-unordered-list-item"><li>Function:Phase failure detection</li><li>Phase sequence monitoring</li><li>Measuring Range:(L-L) 200 ... 500 V AC</li><li>Time Range:500 ms start-up delay</li><li>Rated Control Supply Voltage (Us):(L-L) 200 ... 500 V AC</li><li>Rated Frequency (f):Supply Circuit 50/60 Hz</li><li>Output:2 c/o (SPDT) contacts</li><li>Terminal Type:Screw Terminals</li><li>Rated Operational Current AC-12 (Ie):(230 V) 4 A</li><li>Rated Operational Current AC-15 (Ie):(230 V) 3 A</li><li>Rated Operational Current DC-12 (Ie):(24 V) 4 A</li><li>Rated Operational Current DC-13 (Ie):(24 V) 2 A</li><li>Minimum Switching Capacity:24 V</li><li>10 mA</li><li>Rated Impulse Withstand Voltage (Uimp):Input Circuit 6 kV</li><li>Output Circuit 4 kV</li><li>Rated Insulation Voltage (Ui):Input Circuit / Output Circuit 600 V</li><li>Output Circuit 1 / Output Circuit 2 300 V</li><li>Degree of Protection:Housing IP50</li><li>Terminals IP20</li><li>Overvoltage Category:III</li><li>Pollution Degree:3</li><li>Short-Circuit Protective Devices:Output Circuit NC - F Type Fuses 6 A</li><li>Output Circuit NO - F Type Fuses 10 A</li><li>Electrical Durability:AC-12 100000 cycle</li><li>Mechanical Durability:30000000 cycle</li><li>Connecting Capacity:Flexible with Ferrule 1x 0.5 ... 2.5 mm²</li><li>Flexible with Ferrule 2x 0.5 ... 1.5 mm²</li><li>Flexible with Insulated Ferrule 1x 0.5 ... 2.5 mm²</li><li>Flexible with Insulated Ferrule 2x 0.5 ... 1.5 mm²</li><li>Flexible 1x 0.5 ... 2.5 mm²</li><li>Flexible 2x 0.5 ... 1.5 mm²</li><li>Rigid 1x 0.5 ... 4 mm²</li><li>Rigid 2x 0.5 ... 2.5 mm²</li><li>Tightening Torque:0.6 ... 0.8 N·m</li><li>Wire Stripping Length:8 mm</li><li>Recommended Screw Driver:0.8 x 4</li><li>4.5</li><li>Pozidriv 1</li><li>Mounting Position:1 ... 6</li><li>Mounting on DIN Rail:TH35-15 (35 x 15 mm Mounting Rail) acc. to IEC 60715</li><li>TH35-7.5 (35 x 7.5 mm Mounting Rail) acc. to IEC 60715</li><li>Standards:CAN/CSA C22.2 No.14</li><li>IEC/EN 63000</li><li>IEC/EN 60255-27</li><li>IEC/EN 61000-6-2</li><li>IEC/EN 61000-6-3</li><li>UL 508</li></ul>

<h3>Abb CM-PFS.S Relay Monitoring 3PHASE</h3>
&nbsp;&nbsp;
<ul>
<li>Extended Product Type:CM-PFS.S</li>
<li>Product ID:1SVR730824R9300</li>
<li>EAN:4016779851947</li>
<li>Catalog Description:CM-PFS.S Three-phase monitoring relay 2c/o, L1-L2-L3=200-500VAC 50/60Hz</li>
<li>Long Description:The CM-PFS.S relay is from the CM three-phase monitors range. This relay operates with a rated control supply voltage / three-phase measuring voltage of 200-500 V AC and has a 2 c/o output with contacts rated at 250 V / 4 A. The CM-PFS.S monitors the phase loss and phase sequence. The corresponding threshold values are fixed. The device offers screw connection technology with double-chamber cage connection terminals.</li>
<li>Unit of Measurement : Pcs</li>
</ul>
Technical
<ul>
<li>Function:Phase failure detection</li>
<li>Phase sequence monitoring</li>
<li>Measuring Range:(L-L) 200 ... 500 V AC</li>
<li>Time Range:500 ms start-up delay</li>
<li>Rated Control Supply Voltage (Us):(L-L) 200 ... 500 V AC</li>
<li>Rated Frequency (f):Supply Circuit 50/60 Hz</li>
<li>Output:2 c/o (SPDT) contacts</li>
<li>Terminal Type:Screw Terminals</li>
<li>Rated Operational Current AC-12 (Ie):(230 V) 4 A</li>
<li>Rated Operational Current AC-15 (Ie):(230 V) 3 A</li>
<li>Rated Operational Current DC-12 (Ie):(24 V) 4 A</li>
<li>Rated Operational Current DC-13 (Ie):(24 V) 2 A</li>
<li>Minimum Switching Capacity:24 V</li>
<li>10 mA</li>
<li>Rated Impulse Withstand Voltage (Uimp):Input Circuit 6 kV</li>
<li>Output Circuit 4 kV</li>
<li>Rated Insulation Voltage (Ui):Input Circuit / Output Circuit 600 V</li>
<li>Output Circuit 1 / Output Circuit 2 300 V</li>
<li>Degree of Protection:Housing IP50</li>
<li>Terminals IP20</li>
<li>Overvoltage Category:III</li>
<li>Pollution Degree:3</li>
<li>Short-Circuit Protective Devices:Output Circuit NC - F Type Fuses 6 A</li>
<li>Output Circuit NO - F Type Fuses 10 A</li>
<li>Electrical Durability:AC-12 100000 cycle</li>
<li>Mechanical Durability:30000000 cycle</li>
<li>Connecting Capacity:Flexible with Ferrule 1x 0.5 ... 2.5 mm²</li>
<li>Flexible with Ferrule 2x 0.5 ... 1.5 mm²</li>
<li>Flexible with Insulated Ferrule 1x 0.5 ... 2.5 mm²</li>
<li>Flexible with Insulated Ferrule 2x 0.5 ... 1.5 mm²</li>
<li>Flexible 1x 0.5 ... 2.5 mm²</li>
<li>Flexible 2x 0.5 ... 1.5 mm²</li>
<li>Rigid 1x 0.5 ... 4 mm²</li>
<li>Rigid 2x 0.5 ... 2.5 mm²</li>
<li>Tightening Torque:0.6 ... 0.8 N·m</li>
<li>Wire Stripping Length:8 mm</li>
<li>Recommended Screw Driver:0.8 x 4</li>
<li>4.5</li>
<li>Pozidriv 1</li>
<li>Mounting Position:1 ... 6</li>
<li>Mounting on DIN Rail:TH35-15 (35 x 15 mm Mounting Rail) acc. to IEC 60715</li>
<li>TH35-7.5 (35 x 7.5 mm Mounting Rail) acc. to IEC 60715</li>
<li>Standards:CAN/CSA C22.2 No.14</li>
<li>IEC/EN 63000</li>
<li>IEC/EN 60255-27</li>
<li>IEC/EN 61000-6-2</li>
<li>IEC/EN 61000-6-3</li>
<li>UL 508</li>
</ul>