FLUKE

Fluke Networks

Keysight

Test & Measurement

test-measurement

Electrical Power Testing

electrical-power-testing

Multimeter Leads

multimeter-leads

Network Testers

network-testers

Test Probes

test-probes

Voltmeters

voltmeters

Fluke SMFT-1000 Multifunction Tester, 1000V , Earth Resistance Measurement With Wireless

 Put your solar panels through their paces with this multifunction PV tester kit from FLUKE. You can use it to quickly and accurately measure a host of variables on your photovoltaic panels, from DC voltage and current to maximum power point and power output. The unit's integrated I-V curve tracer lets you compare manufacturer specs with your specific panel instantly in the form of a clear graphic. This makes it easy to spot any issues that could be limiting performance. For a full analysis, you can then run all data through the TruTest software.


• Suitable for test voltages up to 1000V, for versatility
• Includes a professional tool backpack for easy carrying
• MC4 test leads let you easily connect the kit to your solar panels
• TP1000 test probe with remote test button lets you take readings in hard-to-reach locations
• Wireless interface offers freedom of movement


• Renewable energy industry
• Construction industry
• Farms


Regular testing of your solar panels helps to ensure your system is running safely. It also helps you identify and rectify any issues that might be preventing your PV panels from working optimally.


Fluke SMFT-1000-BP Professional Tool Backpack
SMFT-1000 Multifunction PV Analyser with accessories
IRR2-BT Wireless Solar Irradiance Meter Pro with accessories
i100 AC/DC Current Clamp 100 A, TPAK Magnet set
TP1000 Test Probe with Remote Test Button
TL1000 Test Lead Set
TL1000-MC4 Test Lead Set
TL1000/30M Test Lead on Reel
Coupler set
PVLEAD3 MC4 Solar Clamp Test Lead Set
TruTest™ Advanced Data Management and Reporting Software 

<h3 class="md-block-header-three">Fluke SMFT-1000 Multifunction Tester, 1000V , Earth Resistance Measurement With Wireless</h3> Put your solar panels through their paces with this multifunction PV tester kit from FLUKE. You can use it to quickly and accurately measure a host of variables on your photovoltaic panels, from DC voltage and current to maximum power point and power output. The unit&#x27;s integrated I-V curve tracer lets you compare manufacturer specs with your specific panel instantly in the form of a clear graphic. This makes it easy to spot any issues that could be limiting performance. For a full analysis, you can then run all data through the TruTest software. <h3 class="md-block-header-three">Features &amp; Benefits</h3>• Suitable for test voltages up to 1000V, for versatility • Includes a professional tool backpack for easy carrying • MC4 test leads let you easily connect the kit to your solar panels • TP1000 test probe with remote test button lets you take readings in hard-to-reach locations • Wireless interface offers freedom of movement <h3 class="md-block-header-three">Applications</h3>• Renewable energy industry • Construction industry • Farms <h3 class="md-block-header-three">Why do I need to test my solar panels?</h3>Regular testing of your solar panels helps to ensure your system is running safely. It also helps you identify and rectify any issues that might be preventing your PV panels from working optimally. <h3 class="md-block-header-three">Supplied with</h3>Fluke SMFT-1000-BP Professional Tool Backpack SMFT-1000 Multifunction PV Analyser with accessories IRR2-BT Wireless Solar Irradiance Meter Pro with accessories i100 AC/DC Current Clamp 100 A, TPAK Magnet set TP1000 Test Probe with Remote Test Button TL1000 Test Lead Set TL1000-MC4 Test Lead Set TL1000/30M Test Lead on Reel Coupler set PVLEAD3 MC4 Solar Clamp Test Lead Set TruTest™ Advanced Data Management and Reporting Software

<h3>Fluke SMFT-1000 Multifunction Tester, 1000V , Earth Resistance Measurement With Wireless</h3>
&nbsp;Put your solar panels through their paces with this multifunction PV tester kit from FLUKE. You can use it to quickly and accurately measure a host of variables on your photovoltaic panels, from DC voltage and current to maximum power point and power output. The unit's integrated I-V curve tracer lets you compare manufacturer specs with your specific panel instantly in the form of a clear graphic. This makes it easy to spot any issues that could be limiting performance. For a full analysis, you can then run all data through the TruTest software. 

<h3>Features &amp; Benefits</h3>
• Suitable for test voltages up to 1000V, for versatility 
• Includes a professional tool backpack for easy carrying 
• MC4 test leads let you easily connect the kit to your solar panels 
• TP1000 test probe with remote test button lets you take readings in hard-to-reach locations 
• Wireless interface offers freedom of movement 

<h3>Applications</h3>
• Renewable energy industry 
• Construction industry 
• Farms 

<h3>Why do I need to test my solar panels?</h3>
Regular testing of your solar panels helps to ensure your system is running safely. It also helps you identify and rectify any issues that might be preventing your PV panels from working optimally. 

<h3>Supplied with</h3>
Fluke SMFT-1000-BP Professional Tool Backpack 
SMFT-1000 Multifunction PV Analyser with accessories 
IRR2-BT Wireless Solar Irradiance Meter Pro with accessories 
i100 AC/DC Current Clamp 100 A, TPAK Magnet set 
TP1000 Test Probe with Remote Test Button 
TL1000 Test Lead Set 
TL1000-MC4 Test Lead Set 
TL1000/30M Test Lead on Reel 
Coupler set 
PVLEAD3 MC4 Solar Clamp Test Lead Set 
TruTest™ Advanced Data Management and Reporting Software&nbsp;

RS Pro

SCHNEIDER ELECTRIC

Abus

Screw

O Ring

Surface Mount Resistors

Circular Connectors

Contactors

Bolts

Panel Mount Indicators 

Molded Case Circuit Breakers - MCCBs

Junction & Enclosure Box

Electrical Wire 

RS Components ETH SG

buyerIntroduction

fluke smft-1000 multifunction tester, 1000v earth resistance measurement wireless 1000v, pengukuran resistansi bumi dengan nirkabel electrical power testing pengujian daya listrik penguji pelbagai fungsi, rintangan wayarles ujian tenaga elektrik fluke/福禄克 多功能测试仪，1000v，无线接地电阻测量 电力测试 福禄克

fluke-smft-1000-multifunction-tester-1000v-earth-resistance-measurement-with-wireless

Fluke 2AC Non-Contact Voltage Tester (5 Pack)

 Fluke 2AC is the latest addition to the VoltAlert™ AC non-contact voltage tester family from Fluke and is designed to be pocket-sized and easy to use. The 2AC tests for energized circuits and defective grounds, whether it's for an electrician on the factory floor or the do-it-yourselfer around the house. The tip of the pocket-sized tester will glow red when within close proximity of an outlet, terminal strip, or power cord where voltage is present. 

Voltage detection from 90 to 1000 V AC, suitable for a wide range of residential, commercial and industrial needs

Always on, using special low power circuitry to sustain battery life and ensure your 2AC is always ready

Innovative ‘Battery Check’ button function ensures battery is in good condition*

CAT IV 1000 V overvoltage rated product for best in class user protection

Integrated clip design, optimized for pocket storage

<h3 class="md-block-header-three">Fluke 2AC Non-Contact Voltage Tester (5 Pack)</h3> Fluke 2AC is the latest addition to the VoltAlert™ AC non-contact voltage tester family from Fluke and is designed to be pocket-sized and easy to use. The 2AC tests for energized circuits and defective grounds, whether it&#x27;s for an electrician on the factory floor or the do-it-yourselfer around the house. The tip of the pocket-sized tester will glow red when within close proximity of an outlet, terminal strip, or power cord where voltage is present. <ul class="md-block-unordered-list-item"><li>Voltage detection from 90 to 1000 V AC, suitable for a wide range of residential, commercial and industrial needs</li><li>Always on, using special low power circuitry to sustain battery life and ensure your 2AC is always ready</li><li>Innovative ‘Battery Check’ button function ensures battery is in good condition*</li><li>CAT IV 1000 V overvoltage rated product for best in class user protection</li><li>Expanded range: 90 V AC to 1000 V AC</li><li>Integrated clip design, optimized for pocket storage</li><li>Powered by 2x AAA batteries (included)</li><li>Fluke ruggedness and reliability</li></ul>

<h3>Fluke 2AC Non-Contact Voltage Tester (5 Pack)</h3>
&nbsp;Fluke 2AC is the latest addition to the VoltAlert™ AC non-contact voltage tester family from Fluke and is designed to be pocket-sized and easy to use. The 2AC tests for energized circuits and defective grounds, whether it's for an electrician on the factory floor or the do-it-yourselfer around the house. The tip of the pocket-sized tester will glow red when within close proximity of an outlet, terminal strip, or power cord where voltage is present.&nbsp;
<ul>
<li>Voltage detection from 90 to 1000 V AC, suitable for a wide range of residential, commercial and industrial needs</li>
<li>Always on, using special low power circuitry to sustain battery life and ensure your 2AC is always ready</li>
<li>Innovative ‘Battery Check’ button function ensures battery is in good condition*</li>
<li>CAT IV 1000 V overvoltage rated product for best in class user protection</li>
<li>Expanded range: 90 V AC to 1000 V AC</li>
<li>Integrated clip design, optimized for pocket storage</li>
<li>Powered by 2x AAA batteries (included)</li>
<li>Fluke ruggedness and reliability</li>
</ul>

Extech

ACISION

Center

TRIPLETT

PCE Instruments

MEGGER

AMPROBE

Multimeters

Other Measuring Tools

Clamp Meters

Industrial Thermometer

Sound & Vibration Meters

Thermal Imaging Cameras

Humidity & Temperature

CETM

fluke 2ac non-contact voltage tester (5 pack) penguji tegangan non-kontak paket) electrical power testing pengujian daya listrik voltan bukan kenalan pek) ujian tenaga elektrik fluke/福禄克 非接触式电压测试仪（5 件装） 电力测试 福禄克

fluke-2ac-non-contact-voltage-tester-5-pack

Fluke Networks FTK1000 Multimode Fibre Optic Test Kit

Includes	850 & 1300 Source, Case, Power Meter

• Large internal memory saves 1000 results, enabling continuous testing and recording
• LinkWare software helps you analyse your readings and turn them into professional test results
• Dual-wavelength testing feature helps you measure the range of power levels in half the time of traditional fibre testers
• Non-touch solution helps you check for a live fibre without having to plug it into ports
• Carry case included for easy portability

• Construction industry
• Telecommunications
• Computer networks 

<h3 class="md-block-header-three">Fluke Networks FTK1000 Multimode Fibre Optic Test Kit</h3><ul class="md-block-unordered-list-item"><li> Cable Type	Multimode</li><li>Equipment Type	Fibre Optic Test Kit</li><li>Wavelengths	850 nm, 1300 nm</li><li>Resolution	0.01 dB</li><li>Interface Type	USB</li><li>Maximum Power Measurement	+10dBm</li><li>Battery Type	AA</li><li>Battery Life	50 h</li><li>Power Source	Battery</li><li>Includes	850 &amp; 1300 Source, Case, Power Meter</li><li>Width	39mm</li><li>Minimum Operating Temperature	-10°C</li><li>Height	165mm</li><li>Dimensions	80 x 39 x 165mm</li><li>Weight	325g</li><li>Model Number p	FiberMaster</li><li>Maximum Operating Temperature	+50°C</li><li>Length	80mm</li><li>Minimum Output Power	-7dBm</li></ul>Features &amp; Benefits• Large internal memory saves 1000 results, enabling continuous testing and recording • LinkWare software helps you analyse your readings and turn them into professional test results • Dual-wavelength testing feature helps you measure the range of power levels in half the time of traditional fibre testers • Non-touch solution helps you check for a live fibre without having to plug it into ports • Carry case included for easy portabilityApplications• Construction industry • Telecommunications • Computer networks

<h3>Fluke Networks FTK1000 Multimode Fibre Optic Test Kit</h3>
<ul>
<li>&nbsp;Cable Type	Multimode</li>
<li>Equipment Type	Fibre Optic Test Kit</li>
<li>Wavelengths	850 nm, 1300 nm</li>
<li>Resolution	0.01 dB</li>
<li>Interface Type	USB</li>
<li>Maximum Power Measurement	+10dBm</li>
<li>Battery Type	AA</li>
<li>Battery Life	50 h</li>
<li>Power Source	Battery</li>
<li>Includes	850 &amp; 1300 Source, Case, Power Meter</li>
<li>Width	39mm</li>
<li>Minimum Operating Temperature	-10°C</li>
<li>Height	165mm</li>
<li>Dimensions	80 x 39 x 165mm</li>
<li>Weight	325g</li>
<li>Model Number p	FiberMaster</li>
<li>Maximum Operating Temperature	+50°C</li>
<li>Length	80mm</li>
<li>Minimum Output Power	-7dBm</li>
</ul>
Features &amp; Benefits
• Large internal memory saves 1000 results, enabling continuous testing and recording 
• LinkWare software helps you analyse your readings and turn them into professional test results 
• Dual-wavelength testing feature helps you measure the range of power levels in half the time of traditional fibre testers 
• Non-touch solution helps you check for a live fibre without having to plug it into ports 
• Carry case included for easy portability
Applications
• Construction industry 
• Telecommunications 
• Computer networks&nbsp;

Datasheet - FindFiber

SimpliFiber Pro Optical Power Meter and Fiber Test Kits Users Manual

Datasheet

fluke networks ftk1000 multimode fibre optic test kit uji serat optik network testers rangkaian ujian gentian networks/福禄克网络 多模光纤测试套件 福禄克网络

fluke-networks-ftk1000-multimode-fibre-optic-test-kit

Fluke I1000S, Power Quality Analyser Probe

 Fluke power quality analysers help locate, predict, prevent and troubleshoot problems in power distribution systems and include many features to capture details to pinpoint problems quickly and safely. Troubleshooting is fast with on-screen display of trends and captured events, even while background recording continues.
Complete three-phase troubleshooting tool: measures voltage, current, frequency, power, unbalance and flicker, harmonics, inter harmonics, power consumption (Energy) and inrush
AutoTrend: Every displayed reading is automatically and continuously recorded without having to set up threshold levels or interval times
Displays trends in voltage, current, frequency, power, harmonics or flicker on all three phases plus neutral
Analyse the trends using the cursors and zoom function while background recording continues
System-Monitor: gives immediate insight into power system’s quality. Checks conformity to limits specified in EN50160 or to user defined limits. The overview is shown on a single screen, with colour-coded bars clearly indicating which parameters fall outside the limits
Inrush mode for troubleshooting nuisance circuit breaker tripping
Four channels: simultaneously measures voltage and current on all three phases and neutral
Meets EN61010-1 600 V CAT IV, 1000 V CAT III safety standard required for measurements at the service entrance.
Rugged, handheld instrument operates for more than 7 hours on included rechargeable NiMH battery pack
Complies with IEC 61000-4-30 measurement standards.
Stored measurements can be transferred to a PC to view graphs and generate reports with FlukeView software with OC4USB interface adaptor / cable (supplied)
Automatic transient display: captures up to 40 dips, swells, interruptions or transients automatically
8MByte memory, shared memory divided between logging, screens and datasets
Supplied with i400s ac current clamp (4 supplied) range 0.5A to 400A; , maximum conductor diameter 32mm. Safety rating CAT IV, 600V


Fully Class A Compliant - conduct tests according to the stringent international IEC 61000-4-30 Class A standard
Configure for any test condition with memory for over 400 parameters at user defined intervals
16MByte memory, shared memory divided between logging, screens and datasets
Measure interference from specific frequency signals with mains signalling function
i430 flexible current clamp (4 supplied as standard) range 30A to 3000A ac; , maximum conductor diameter 160mm. Safety rating CAT IV, 600V
C435, Hard carrying case with handle and wheels
PowerLog software


i430Flex 3000A ac flexible current clamps (set of 4 supplied as standard with 435) range 30A to 3000A, maximum conductor diameter 160mm. Safety rating EN610101 CAT IV, 600V
i5sPQ3: 5Aac current clamps (3 in a set) range 10mA to 5A; maximum conductor diameter 15mm, Safety rating EN610101 CAT III 600V
i1000s, ac current clamp (sold individually) range 0.1A to 1000 A rms, maximum conductor diameter 54mm. Safety rating EN610101 CAT III 600V


3 year warranty on Analyser units 434 & 435 only.

Hard carrying case (Fluke 434 with C434, Fluke 435 with C435 with handle and wheels), 4 current probes, 5 test leads and crocodile clips, NiMH battery charger, BP190 NiMH rechargeable battery (installed), FlukeView analysis (Fluke 434 and 435) & PowerLog software (Fluke 435 only), OC4USB optical USB cable, colour localisation set, quick start printed manual, user manual CD.

FLUKE Power Quality Analyser Probe For Use With 41B Series, 550g Weight, 1.6m Output Cable - I1000S

Stay one step ahead in your industrial evaluations with this power quality analyser probe from FLUKE. Its clamp-on design makes it possible to receive accurate current measurements without breaking the circuit. Designed to connect directly to a FLUKE 41B power quality analyser with a reinforced coaxial cable and insulated BNC connector, it's quick and easy to set up and use. As the probe has an in-built passive filter, it eliminates potential interference to deliver reliably accurate readings.


• Operating temperature range between -10ºC and +50ºC suitable for use in demanding industrial environments
• IP40 rating indicates protection against objects larger than 1mm, such as wires


• Aerospace engineering
• Electrical industry
• Warehouses and storage facilities


What instruments is this analyser probe compatible with?

The device is designed for use with FLUKE's 41B series. It's also compatible with any oscilloscope that will work with a BNC connector and has an input impedance of ≥1Ω.


The unit has small dimensions of 111 (H) x 216 (W) x 45mm (D), making it easily portable. 

<h3 class="md-block-header-three">Fluke I1000S, Power Quality Analyser Probe</h3> Fluke power quality analysers help locate, predict, prevent and troubleshoot problems in power distribution systems and include many features to capture details to pinpoint problems quickly and safely. Troubleshooting is fast with on-screen display of trends and captured events, even while background recording continues. Complete three-phase troubleshooting tool: measures voltage, current, frequency, power, unbalance and flicker, harmonics, inter harmonics, power consumption (Energy) and inrush AutoTrend: Every displayed reading is automatically and continuously recorded without having to set up threshold levels or interval times Displays trends in voltage, current, frequency, power, harmonics or flicker on all three phases plus neutral Analyse the trends using the cursors and zoom function while background recording continues System-Monitor: gives immediate insight into power system’s quality. Checks conformity to limits specified in EN50160 or to user defined limits. The overview is shown on a single screen, with colour-coded bars clearly indicating which parameters fall outside the limits Inrush mode for troubleshooting nuisance circuit breaker tripping Four channels: simultaneously measures voltage and current on all three phases and neutral Meets EN61010-1 600 V CAT IV, 1000 V CAT III safety standard required for measurements at the service entrance. Rugged, handheld instrument operates for more than 7 hours on included rechargeable NiMH battery pack Complies with IEC 61000-4-30 measurement standards. Stored measurements can be transferred to a PC to view graphs and generate reports with FlukeView software with OC4USB interface adaptor / cable (supplied) Automatic transient display: captures up to 40 dips, swells, interruptions or transients automatically 8MByte memory, shared memory divided between logging, screens and datasets Supplied with i400s ac current clamp (4 supplied) range 0.5A to 400A; , maximum conductor diameter 32mm. Safety rating CAT IV, 600V <h3 class="md-block-header-three">Fluke 435 Advanced Features</h3>Fully Class A Compliant - conduct tests according to the stringent international IEC 61000-4-30 Class A standard Configure for any test condition with memory for over 400 parameters at user defined intervals 16MByte memory, shared memory divided between logging, screens and datasets Measure interference from specific frequency signals with mains signalling function i430 flexible current clamp (4 supplied as standard) range 30A to 3000A ac; , maximum conductor diameter 160mm. Safety rating CAT IV, 600V C435, Hard carrying case with handle and wheels PowerLog software <h3 class="md-block-header-three">Current Clamp Options</h3>i430Flex 3000A ac flexible current clamps (set of 4 supplied as standard with 435) range 30A to 3000A, maximum conductor diameter 160mm. Safety rating EN610101 CAT IV, 600V i5sPQ3: 5Aac current clamps (3 in a set) range 10mA to 5A; maximum conductor diameter 15mm, Safety rating EN610101 CAT III 600V i1000s, ac current clamp (sold individually) range 0.1A to 1000 A rms, maximum conductor diameter 54mm. Safety rating EN610101 CAT III 600V <h3 class="md-block-header-three">Note</h3>3 year warranty on Analyser units 434 &amp; 435 only.<h3 class="md-block-header-three">Supplied with</h3>Hard carrying case (Fluke 434 with C434, Fluke 435 with C435 with handle and wheels), 4 current probes, 5 test leads and crocodile clips, NiMH battery charger, BP190 NiMH rechargeable battery (installed), FlukeView analysis (Fluke 434 and 435) &amp; PowerLog software (Fluke 435 only), OC4USB optical USB cable, colour localisation set, quick start printed manual, user manual CD.<h3 class="md-block-header-three">FLUKE Power Quality Analyser Probe For Use With 41B Series, 550g Weight, 1.6m Output Cable - I1000S</h3>Stay one step ahead in your industrial evaluations with this power quality analyser probe from FLUKE. Its clamp-on design makes it possible to receive accurate current measurements without breaking the circuit. Designed to connect directly to a FLUKE 41B power quality analyser with a reinforced coaxial cable and insulated BNC connector, it&#x27;s quick and easy to set up and use. As the probe has an in-built passive filter, it eliminates potential interference to deliver reliably accurate readings. <h3 class="md-block-header-three">Features &amp; Benefits</h3>• Operating temperature range between -10ºC and +50ºC suitable for use in demanding industrial environments • IP40 rating indicates protection against objects larger than 1mm, such as wires <h3 class="md-block-header-three">Applications</h3>• Aerospace engineering • Electrical industry • Warehouses and storage facilities <h3 class="md-block-header-three">What instruments is this analyser probe compatible with?</h3>The device is designed for use with FLUKE&#x27;s 41B series. It&#x27;s also compatible with any oscilloscope that will work with a BNC connector and has an input impedance of ≥1Ω. <h3 class="md-block-header-three">How big is this probe?</h3>The unit has small dimensions of 111 (H) x 216 (W) x 45mm (D), making it easily portable.

<h3>Fluke I1000S, Power Quality Analyser Probe</h3>
&nbsp;Fluke power quality analysers help locate, predict, prevent and troubleshoot problems in power distribution systems and include many features to capture details to pinpoint problems quickly and safely. Troubleshooting is fast with on-screen display of trends and captured events, even while background recording continues. 
Complete three-phase troubleshooting tool: measures voltage, current, frequency, power, unbalance and flicker, harmonics, inter harmonics, power consumption (Energy) and inrush 
AutoTrend: Every displayed reading is automatically and continuously recorded without having to set up threshold levels or interval times 
Displays trends in voltage, current, frequency, power, harmonics or flicker on all three phases plus neutral 
Analyse the trends using the cursors and zoom function while background recording continues 
System-Monitor: gives immediate insight into power system’s quality. Checks conformity to limits specified in EN50160 or to user defined limits. The overview is shown on a single screen, with colour-coded bars clearly indicating which parameters fall outside the limits 
Inrush mode for troubleshooting nuisance circuit breaker tripping 
Four channels: simultaneously measures voltage and current on all three phases and neutral 
Meets EN61010-1 600 V CAT IV, 1000 V CAT III safety standard required for measurements at the service entrance. 
Rugged, handheld instrument operates for more than 7 hours on included rechargeable NiMH battery pack 
Complies with IEC 61000-4-30 measurement standards. 
Stored measurements can be transferred to a PC to view graphs and generate reports with FlukeView software with OC4USB interface adaptor / cable (supplied) 
Automatic transient display: captures up to 40 dips, swells, interruptions or transients automatically 
8MByte memory, shared memory divided between logging, screens and datasets 
Supplied with i400s ac current clamp (4 supplied) range 0.5A to 400A; , maximum conductor diameter 32mm. Safety rating CAT IV, 600V 

<h3>Fluke 435 Advanced Features</h3>
Fully Class A Compliant - conduct tests according to the stringent international IEC 61000-4-30 Class A standard 
Configure for any test condition with memory for over 400 parameters at user defined intervals 
16MByte memory, shared memory divided between logging, screens and datasets 
Measure interference from specific frequency signals with mains signalling function 
i430 flexible current clamp (4 supplied as standard) range 30A to 3000A ac; , maximum conductor diameter 160mm. Safety rating CAT IV, 600V 
C435, Hard carrying case with handle and wheels 
PowerLog software 

<h3>Current Clamp Options</h3>
i430Flex 3000A ac flexible current clamps (set of 4 supplied as standard with 435) range 30A to 3000A, maximum conductor diameter 160mm. Safety rating EN610101 CAT IV, 600V 
i5sPQ3: 5Aac current clamps (3 in a set) range 10mA to 5A; maximum conductor diameter 15mm, Safety rating EN610101 CAT III 600V 
i1000s, ac current clamp (sold individually) range 0.1A to 1000 A rms, maximum conductor diameter 54mm. Safety rating EN610101 CAT III 600V 

<h3>Note</h3>
3 year warranty on Analyser units 434 &amp; 435 only.
<h3>Supplied with</h3>
Hard carrying case (Fluke 434 with C434, Fluke 435 with C435 with handle and wheels), 4 current probes, 5 test leads and crocodile clips, NiMH battery charger, BP190 NiMH rechargeable battery (installed), FlukeView analysis (Fluke 434 and 435) &amp; PowerLog software (Fluke 435 only), OC4USB optical USB cable, colour localisation set, quick start printed manual, user manual CD.
<h3>FLUKE Power Quality Analyser Probe For Use With 41B Series, 550g Weight, 1.6m Output Cable - I1000S</h3>
Stay one step ahead in your industrial evaluations with this power quality analyser probe from FLUKE. Its clamp-on design makes it possible to receive accurate current measurements without breaking the circuit. Designed to connect directly to a FLUKE 41B power quality analyser with a reinforced coaxial cable and insulated BNC connector, it's quick and easy to set up and use. As the probe has an in-built passive filter, it eliminates potential interference to deliver reliably accurate readings. 

<h3>Features &amp; Benefits</h3>
• Operating temperature range between -10ºC and +50ºC suitable for use in demanding industrial environments 
• IP40 rating indicates protection against objects larger than 1mm, such as wires 

<h3>Applications</h3>
• Aerospace engineering 
• Electrical industry 
• Warehouses and storage facilities 

<h3>What instruments is this analyser probe compatible with?</h3>
The device is designed for use with FLUKE's 41B series. It's also compatible with any oscilloscope that will work with a BNC connector and has an input impedance of ≥1Ω. 

<h3>How big is this probe?</h3>
The unit has small dimensions of 111 (H) x 216 (W) x 45mm (D), making it easily portable.&nbsp;

fluke i1000s, power quality analyser probe penganalisis kualitas daya electrical testing pengujian listrik kuasa kualiti ujian tenaga elektrik fluke/福禄克 i1000s 电能质量分析仪探头 电力测试 福禄克

fluke-i1000s-power-quality-analyser-probe

Fluke 1AC-II 1AC Non Contact Voltage Detector, 200V to 1000V

• Self-testing
• Non-intrusive, optical and acoustic detection of AC voltages
• Quick and easy detection of cable breaks in exposed cables, for example cable reels
• Compact, pocket-size practical and ergonomic design


What is a non-contact voltage tester used for?
Voltage testers or detectors are used to check the flow of current through a circuit. They can be used to check safety, or to ensure equipment is functioning correctly. They can also test for the current strength, whether the circuit is grounded correctly or to ensure no current is flowing at all so that work can be begin on the circuit.


How do non-contact voltage testers work?
Also known as a voltage detector, voltage tester pens, sensors or test pens. They allow the user to test electrical conductors without touching them. Non-contact testers are the safest and easiest way to detect electric fields or voltage. Voltage testers utilise what is called capacitive coupling, the user holding the instrument provides a ground reference. The tester then detects changing electric field around the object or objects conducting an AC current. (Alternating current) Simply put, the user and the tester pen when near the electrical conductor will cause a small current to flow through the tester from the source, this is how it detects AC voltage.


FLUKE Non-Contact Voltage Detector, High-Intensity Red LED Light, Battery Powered - VoltAlert Series - FLUKE 1AC-II

Looking for a safe way to keep tabs on signal presence in your circuits? Go for this non-contact voltage detector from FLUKE. To use it, simply touch its tip on the terminal or outlet you want to assess and wait for a beep to show that there's voltage. This handy piece of kit ensures you're not exposed to the risk of electric shock caused by direct contact with live conductors. It measures between 90 and 1000V of AC voltage, making it the right pick for light-duty and heavy-duty applications alike.


• LED and audio indicators make voltage detection a breeze
• Comes with two AAA batteries, eliminating the need for a wired power source
• Performs reliably in challenging operating temperatures between -10°C and +50°C
• IP40 rating shows that it's finger safe as it resists objects larger than 1mm in size


• Consumer electronics
• Switchgear systems
• Medical equipment
 

<h3 class="md-block-header-three">Fluke 1AC-II 1AC Non Contact Voltage Detector, 200V to 1000V</h3><ul class="md-block-unordered-list-item"><li> Indicator Type	Voltage</li><li>Battery Type	AAA</li><li>Audible Tone	Yes</li><li>Power Source	Battery</li><li>Safety Category	CAT IV 1000 V</li><li>Weight	50g</li><li>Height	25mm</li><li>Length	148mm</li><li>Maximum Detection Voltage	1000V</li><li>Minimum Detection Voltage	200V</li><li>Maximum Operating Temperature	+50°C</li><li>Width	18mm</li><li>Safety Category Level	CAT IV</li><li>Safety Category Voltage	1000V</li><li>Model Number p	1AC</li><li>Minimum Operating Temperature	-10°C</li></ul>Features and Benefits:• Self-testing • Non-intrusive, optical and acoustic detection of AC voltages • Quick and easy detection of cable breaks in exposed cables, for example cable reels • Compact, pocket-size practical and ergonomic design Frequently asked questions:What is a non-contact voltage tester used for? Voltage testers or detectors are used to check the flow of current through a circuit. They can be used to check safety, or to ensure equipment is functioning correctly. They can also test for the current strength, whether the circuit is grounded correctly or to ensure no current is flowing at all so that work can be begin on the circuit. How do non-contact voltage testers work? Also known as a voltage detector, voltage tester pens, sensors or test pens. They allow the user to test electrical conductors without touching them. Non-contact testers are the safest and easiest way to detect electric fields or voltage. Voltage testers utilise what is called capacitive coupling, the user holding the instrument provides a ground reference. The tester then detects changing electric field around the object or objects conducting an AC current. (Alternating current) Simply put, the user and the tester pen when near the electrical conductor will cause a small current to flow through the tester from the source, this is how it detects AC voltage. FLUKE Non-Contact Voltage Detector, High-Intensity Red LED Light, Battery Powered - VoltAlert Series - FLUKE 1AC-IILooking for a safe way to keep tabs on signal presence in your circuits? Go for this non-contact voltage detector from FLUKE. To use it, simply touch its tip on the terminal or outlet you want to assess and wait for a beep to show that there&#x27;s voltage. This handy piece of kit ensures you&#x27;re not exposed to the risk of electric shock caused by direct contact with live conductors. It measures between 90 and 1000V of AC voltage, making it the right pick for light-duty and heavy-duty applications alike. Features &amp; Benefits• LED and audio indicators make voltage detection a breeze • Comes with two AAA batteries, eliminating the need for a wired power source • Performs reliably in challenging operating temperatures between -10°C and +50°C • IP40 rating shows that it&#x27;s finger safe as it resists objects larger than 1mm in size Applications• Consumer electronics • Switchgear systems • Medical equipment

<h3>Fluke 1AC-II 1AC Non Contact Voltage Detector, 200V to 1000V</h3>
<ul>
<li>&nbsp;Indicator Type	Voltage</li>
<li>Battery Type	AAA</li>
<li>Audible Tone	Yes</li>
<li>Power Source	Battery</li>
<li>Safety Category	CAT IV 1000 V</li>
<li>Weight	50g</li>
<li>Height	25mm</li>
<li>Length	148mm</li>
<li>Maximum Detection Voltage	1000V</li>
<li>Minimum Detection Voltage	200V</li>
<li>Maximum Operating Temperature	+50°C</li>
<li>Width	18mm</li>
<li>Safety Category Level	CAT IV</li>
<li>Safety Category Voltage	1000V</li>
<li>Model Number p	1AC</li>
<li>Minimum Operating Temperature	-10°C</li>
</ul>
Features and Benefits:
• Self-testing 
• Non-intrusive, optical and acoustic detection of AC voltages 
• Quick and easy detection of cable breaks in exposed cables, for example cable reels 
• Compact, pocket-size practical and ergonomic design 

Frequently asked questions:
What is a non-contact voltage tester used for? 
Voltage testers or detectors are used to check the flow of current through a circuit. They can be used to check safety, or to ensure equipment is functioning correctly. They can also test for the current strength, whether the circuit is grounded correctly or to ensure no current is flowing at all so that work can be begin on the circuit. 

How do non-contact voltage testers work? 
Also known as a voltage detector, voltage tester pens, sensors or test pens. They allow the user to test electrical conductors without touching them. Non-contact testers are the safest and easiest way to detect electric fields or voltage. Voltage testers utilise what is called capacitive coupling, the user holding the instrument provides a ground reference. The tester then detects changing electric field around the object or objects conducting an AC current. (Alternating current) Simply put, the user and the tester pen when near the electrical conductor will cause a small current to flow through the tester from the source, this is how it detects AC voltage. 

FLUKE Non-Contact Voltage Detector, High-Intensity Red LED Light, Battery Powered - VoltAlert Series - FLUKE 1AC-II
Looking for a safe way to keep tabs on signal presence in your circuits? Go for this non-contact voltage detector from FLUKE. To use it, simply touch its tip on the terminal or outlet you want to assess and wait for a beep to show that there's voltage. This handy piece of kit ensures you're not exposed to the risk of electric shock caused by direct contact with live conductors. It measures between 90 and 1000V of AC voltage, making it the right pick for light-duty and heavy-duty applications alike. 

Features &amp; Benefits
• LED and audio indicators make voltage detection a breeze 
• Comes with two AAA batteries, eliminating the need for a wired power source 
• Performs reliably in challenging operating temperatures between -10°C and +50°C 
• IP40 rating shows that it's finger safe as it resists objects larger than 1mm in size 

Applications
• Consumer electronics 
• Switchgear systems 
• Medical equipment 
&nbsp;

1AC/2AC VoltAlert Data Sheet

Instruction Sheet - 1AC II

fluke 1ac-ii 1ac non contact voltage detector, 200v 1000v detektor tegangan nonkontak 1ac, hingga voltmeters pengesan voltan tanpa sentuhan fluke/福禄克 非接触式电压检测器，200v 福禄克

fluke-1ac-ii-1ac-non-contact-voltage-detector-200v-to-1000v

 The Fluke 2AC is the latest addition to the VoltAlert™ AC non-contact voltage tester family. It is designed to be pocket-sized and easy to use. The tip of the pocket-sized tester will glow red when within close proximity of an outlet, terminal strip, or power cord where voltage is present. The 2 AC is always on, with a battery check function to make sure the tester is working properly  

The 2AC tests for energized circuits and defective grounds, whether it’s for an electrician on the factory floor or the do-it-yourselfer around the house.

Suitable for a wide range of residential, commercial and industrial needs

Fluke ruggedness and reliability with a two-year warranty 

Non-contact voltage detection from 90 to 1000 V AC

Innovative ‘Battery Check’ ensures battery is in good condition*

Operating Principles: Senses the steady-state electrostatic field produced by AC voltage through insulation without requiring contact to the bare conductor. A red glow at the tip indicates the presence of voltage.

Safety Compliance: Meets IEC 61010-1:2001, UL 61010-1 (2nd ed.), CAN/CSA-C22.2 No. 61010-1-04, and ISA-82.02.01 Pollution Degree 2

Operating Voltage Range: 90 V AC to 1000 V AC

Temperature (Operating and Storage): -10°C to 50°C (-14°F to 122°F)

Battery Life: Typical battery life of greater than one year

<h3 class="md-block-header-three">Fluke 2AC Non-Contact Voltage Tester</h3> The Fluke 2AC is the latest addition to the VoltAlert™ AC non-contact voltage tester family. It is designed to be pocket-sized and easy to use. The tip of the pocket-sized tester will glow red when within close proximity of an outlet, terminal strip, or power cord where voltage is present. The 2 AC is always on, with a battery check function to make sure the tester is working properly <ul class="md-block-unordered-list-item"><li>The 2AC tests for energized circuits and defective grounds, whether it’s for an electrician on the factory floor or the do-it-yourselfer around the house.</li><li>CAT IV 1000 V overvoltage rated product for best in class user protection</li><li>Suitable for a wide range of residential, commercial and industrial needs</li><li>Fluke ruggedness and reliability with a two-year warranty </li><li>Non-contact voltage detection from 90 to 1000 V AC</li><li>Innovative ‘Battery Check’ ensures battery is in good condition*</li><li>Integrated clip design, optimized for pocket storage</li><li>Operating Principles: Senses the steady-state electrostatic field produced by AC voltage through insulation without requiring contact to the bare conductor. A red glow at the tip indicates the presence of voltage.</li><li>Safety Compliance: Meets IEC 61010-1:2001, UL 61010-1 (2nd ed.), CAN/CSA-C22.2 No. 61010-1-04, and ISA-82.02.01 Pollution Degree 2</li><li>EMC Compliance: Meets IEC 61326-1:2006</li><li>Operating Voltage Range: 90 V AC to 1000 V AC</li><li>Safety Rating: CAT IV 1000 V rated</li><li>Temperature (Operating and Storage): -10°C to 50°C (-14°F to 122°F)</li><li>Operating Humidity Ranges:</li></ul>0% to 95% RH (0°C to 30°C)0% to 75% RH (30°C to 40°C)0% to 45% RH (40°C to 55°C)<ul class="md-block-unordered-list-item"><li>Altitude: 2000 m (CAT IV 1000 V)</li><li>Cleaning: Clean with damp cloth</li><li>Battery Life: Typical battery life of greater than one year</li></ul>

<h3>Fluke 2AC Non-Contact Voltage Tester</h3>
&nbsp;The Fluke 2AC is the latest addition to the VoltAlert™ AC non-contact voltage tester family. It is designed to be pocket-sized and easy to use. The tip of the pocket-sized tester will glow red when within close proximity of an outlet, terminal strip, or power cord where voltage is present. The 2 AC is always on, with a battery check function to make sure the tester is working properly&nbsp;&nbsp;
<ul>
<li>The 2AC tests for energized circuits and defective grounds, whether it’s for an electrician on the factory floor or the do-it-yourselfer around the house.</li>
<li>CAT IV 1000 V overvoltage rated product for best in class user protection</li>
<li>Suitable for a wide range of residential, commercial and industrial needs</li>
<li>Fluke ruggedness and reliability with a two-year warranty&nbsp;</li>
<li>Non-contact voltage detection from 90 to 1000 V AC</li>
<li>Innovative ‘Battery Check’ ensures battery is in good condition*</li>
<li>Integrated clip design, optimized for pocket storage</li>
<li>Operating Principles: Senses the steady-state electrostatic field produced by AC voltage through insulation without requiring contact to the bare conductor. A red glow at the tip indicates the presence of voltage.</li>
<li>Safety Compliance: Meets IEC 61010-1:2001, UL 61010-1 (2nd ed.), CAN/CSA-C22.2 No. 61010-1-04, and ISA-82.02.01 Pollution Degree 2</li>
<li>EMC Compliance: Meets IEC 61326-1:2006</li>
<li>Operating Voltage Range: 90 V AC to 1000 V AC</li>
<li>Safety Rating: CAT IV 1000 V rated</li>
<li>Temperature (Operating and Storage): -10°C to 50°C (-14°F to 122°F)</li>
<li>Operating Humidity Ranges:</li>
</ul>
0% to 95% RH (0°C to 30°C)
0% to 75% RH (30°C to 40°C)
0% to 45% RH (40°C to 55°C)
<ul>
<li>Altitude: 2000 m (CAT IV 1000 V)</li>
<li>Cleaning: Clean with damp cloth</li>
<li>Battery Life: Typical battery life of greater than one year</li>
</ul>

Fluke 2AC Non-Contact Voltage Tester

fluke 2ac non-contact voltage tester penguji tegangan non-kontak electrical power testing pengujian daya listrik voltan bukan kenalan ujian tenaga elektrik fluke/福禄克 非接触式电压测试仪 电力测试 福禄克

fluke-2ac-non-contact-voltage-tester

Keysight Technologies 34133A Test Lead, Cat Ii, 3A

 The Keysight 34133A precision electronic test leads are designed specifically for working with small components and in dense circuit boards. The test leads are small, light and feature Keysight's patented browser concept, using a crown point pogo pin. The spring-loaded tip helps absorb those small movements and the crown point digs into solder. Each kit includes two test leads (one red and one black).


Termination - right angle shrouded banana plugs
Maximum current 3A
Rating 1000V CAT II
Length 1.2m (48 in)


These leads are connecting cables which are used specifically for Multimeters, attaching a test probe to the end will allow the user to measure the required voltage, current or electrical resistance. As it assists operation with a multimeter, at least two of these types of electrical values are measured.


Connecting to multimeters, a set of test probes will measure the device or target for an accurate reading, such as voltage or current. Due to the flexibility and quality produced by Keysight Technologies, each probe provides much-needed precision.


What are the differences between safety categories?

For protection, safety categories are an important attribute which must be taken into consideration for any electronic test equipment. With any category (i.e CAT II, CAT III), a higher voltage will indicate a higher level of protection. As an example, a test probe providing CAT III 1000 V, provides a higher degree of protection than a CAT III 600 V probe.


Keysight Technologies Multimeter Leads, 1000V Voltage Rating, 1.2m Length - 34133A

Monitor the electrical properties of your devices with these multimeter leads from Keysight Technologies. The crown-point pogo pin connector has a spring-loaded tip that absorbs pressure to give you stable contact for precise operation. These cables have a voltage rating of 1000V, so they can handle powerful surges to protect your devices against electrical damage. The leads are colour-coded for ease of identification.


• Length of 1.2m for a flexible connection between your multimeter and your components
• Banana plug design ensures a secure attachment
• Right-angled head makes it easy to fit into tight spaces
• Current rating of 3A for use in low-power applications
• Moulded connector makes it simple to plug in and remove


• Research and development
• Construction industry
• Battery testing


What properties do these test leads measure?

These test leads measure voltage, current and electrical resistance, making them a versatile choice.


How do I connect these leads to my multimeter?

Simply plug the black lead into the COM or common port to ground the circuit. Then plug the red lead into the mAVΩ port to take measurements. 

<h3 class="md-block-header-three">Keysight Technologies 34133A Test Lead, Cat Ii, 3A</h3> The Keysight 34133A precision electronic test leads are designed specifically for working with small components and in dense circuit boards. The test leads are small, light and feature Keysight&#x27;s patented browser concept, using a crown point pogo pin. The spring-loaded tip helps absorb those small movements and the crown point digs into solder. Each kit includes two test leads (one red and one black). <h3 class="md-block-header-three">Features and Benefits</h3>Termination - right angle shrouded banana plugs Maximum current 3A Rating 1000V CAT II Length 1.2m (48 in) <h3 class="md-block-header-three">What are test leads?</h3>These leads are connecting cables which are used specifically for Multimeters, attaching a test probe to the end will allow the user to measure the required voltage, current or electrical resistance. As it assists operation with a multimeter, at least two of these types of electrical values are measured. <h3 class="md-block-header-three">What are test probes?</h3>Connecting to multimeters, a set of test probes will measure the device or target for an accurate reading, such as voltage or current. Due to the flexibility and quality produced by Keysight Technologies, each probe provides much-needed precision. <h3 class="md-block-header-three">What are the differences between safety categories?</h3>For protection, safety categories are an important attribute which must be taken into consideration for any electronic test equipment. With any category (i.e CAT II, CAT III), a higher voltage will indicate a higher level of protection. As an example, a test probe providing CAT III 1000 V, provides a higher degree of protection than a CAT III 600 V probe. <h3 class="md-block-header-three">Keysight Technologies Multimeter Leads, 1000V Voltage Rating, 1.2m Length - 34133A</h3>Monitor the electrical properties of your devices with these multimeter leads from Keysight Technologies. The crown-point pogo pin connector has a spring-loaded tip that absorbs pressure to give you stable contact for precise operation. These cables have a voltage rating of 1000V, so they can handle powerful surges to protect your devices against electrical damage. The leads are colour-coded for ease of identification. <h3 class="md-block-header-three">Features &amp; Benefits</h3>• Length of 1.2m for a flexible connection between your multimeter and your components • Banana plug design ensures a secure attachment • Right-angled head makes it easy to fit into tight spaces • Current rating of 3A for use in low-power applications • Moulded connector makes it simple to plug in and remove <h3 class="md-block-header-three">Applications</h3>• Research and development • Construction industry • Battery testing <h3 class="md-block-header-three">What properties do these test leads measure?</h3>These test leads measure voltage, current and electrical resistance, making them a versatile choice. <h3 class="md-block-header-three">How do I connect these leads to my multimeter?</h3>Simply plug the black lead into the COM or common port to ground the circuit. Then plug the red lead into the mAVΩ port to take measurements.

<h3>Keysight Technologies 34133A Test Lead, Cat Ii, 3A</h3>
&nbsp;The Keysight 34133A precision electronic test leads are designed specifically for working with small components and in dense circuit boards. The test leads are small, light and feature Keysight's patented browser concept, using a crown point pogo pin. The spring-loaded tip helps absorb those small movements and the crown point digs into solder. Each kit includes two test leads (one red and one black). 

<h3>Features and Benefits</h3>
Termination - right angle shrouded banana plugs 
Maximum current 3A 
Rating 1000V CAT II 
Length 1.2m (48 in) 

<h3>What are test leads?</h3>
These leads are connecting cables which are used specifically for Multimeters, attaching a test probe to the end will allow the user to measure the required voltage, current or electrical resistance. As it assists operation with a multimeter, at least two of these types of electrical values are measured. 

<h3>What are test probes?</h3>
Connecting to multimeters, a set of test probes will measure the device or target for an accurate reading, such as voltage or current. Due to the flexibility and quality produced by Keysight Technologies, each probe provides much-needed precision. 

<h3>What are the differences between safety categories?</h3>
For protection, safety categories are an important attribute which must be taken into consideration for any electronic test equipment. With any category (i.e CAT II, CAT III), a higher voltage will indicate a higher level of protection. As an example, a test probe providing CAT III 1000 V, provides a higher degree of protection than a CAT III 600 V probe. 

<h3>Keysight Technologies Multimeter Leads, 1000V Voltage Rating, 1.2m Length - 34133A</h3>
Monitor the electrical properties of your devices with these multimeter leads from Keysight Technologies. The crown-point pogo pin connector has a spring-loaded tip that absorbs pressure to give you stable contact for precise operation. These cables have a voltage rating of 1000V, so they can handle powerful surges to protect your devices against electrical damage. The leads are colour-coded for ease of identification. 

<h3>Features &amp; Benefits</h3>
• Length of 1.2m for a flexible connection between your multimeter and your components 
• Banana plug design ensures a secure attachment 
• Right-angled head makes it easy to fit into tight spaces 
• Current rating of 3A for use in low-power applications 
• Moulded connector makes it simple to plug in and remove 

<h3>Applications</h3>
• Research and development 
• Construction industry 
• Battery testing 

<h3>What properties do these test leads measure?</h3>
These test leads measure voltage, current and electrical resistance, making them a versatile choice. 

<h3>How do I connect these leads to my multimeter?</h3>
Simply plug the black lead into the COM or common port to ground the circuit. Then plug the red lead into the mAVΩ port to take measurements.&nbsp;

34133A Test Leads Data Sheet

keysight technologies 34133a test lead, cat ii, 3a kabel uji 34133a, multimeter leads keysight/是德科技 测试引线，cat ii，3a 是德科技

keysight-technologies-34133a-test-lead-cat-ii-3a

Fluke TP220-1 Test Probe, 12mm Tip, 1kV, 10A

• Both test leads and probes available
• Durable connection, which guarantees excellent results
• Single accessories and kits
• Different safety categories to suit the application
• Insulated wires

These leads are connecting cables which are used specifically for Multimeters, attaching a test probe to the end will allow the user to measure the required voltage, current or electrical resistance. As it assists operation with a multimeter, at least two of these types of electrical values are measured.

Connecting to Fluke multimeters, a set of test probes will measure the device or target for an accurate reading, such as voltage or current. Due to the flexibility and quality produced by Fluke, each probe provides much-needed precision.

FLUKE Test Probes, Needle Design, Black And Red Colour - SureGrip Series - TP220-1

Want to take standard electrical measurements in hard-to-reach work areas? Send in these test probes from FLUKE. Their 12mm needle-shaped tips squeeze comfortably into tight spaces like recessed terminals and are also ideal for testing smaller components. Simply pop them on a pair of leads linked to a multimeter to begin taking readings such as voltage, current and temperature. Thanks to their CAT II 1000V safety rating, they hold their own against impulse voltages of up to 6000V. As the tips are made from durable stainless steel, these probes are built to last.

• 10A current rating for compatibility with powerful electrical setups
• Stainless steel tips resist rust for a long service life in humid work areas
• Moulded rubber design is easy to grip
• Connect to banana plugs for a swift and straightforward setup
• Sharp tips for precision contact

• Consumer electronics
• Manufacturing industry
• Medical technology
• Energy sector 

<h3 class="md-block-header-three">Fluke TP220-1 Test Probe, 12mm Tip, 1kV, 10A</h3><ul class="md-block-unordered-list-item"><li> Voltage Rating	1kV</li><li>Current Rating	10A</li><li>Colour	Black, Red</li><li>Tip Size	12mm</li><li>Tip Material	Stainless Steel</li></ul>Features and Benefits• Both test leads and probes available • Durable connection, which guarantees excellent results • Single accessories and kits • Different safety categories to suit the application • Insulated wiresWhat are test leads?These leads are connecting cables which are used specifically for Multimeters, attaching a test probe to the end will allow the user to measure the required voltage, current or electrical resistance. As it assists operation with a multimeter, at least two of these types of electrical values are measured.What are test probes?Connecting to Fluke multimeters, a set of test probes will measure the device or target for an accurate reading, such as voltage or current. Due to the flexibility and quality produced by Fluke, each probe provides much-needed precision.FLUKE Test Probes, Needle Design, Black And Red Colour - SureGrip Series - TP220-1Want to take standard electrical measurements in hard-to-reach work areas? Send in these test probes from FLUKE. Their 12mm needle-shaped tips squeeze comfortably into tight spaces like recessed terminals and are also ideal for testing smaller components. Simply pop them on a pair of leads linked to a multimeter to begin taking readings such as voltage, current and temperature. Thanks to their CAT II 1000V safety rating, they hold their own against impulse voltages of up to 6000V. As the tips are made from durable stainless steel, these probes are built to last.Features &amp; Benefits• 10A current rating for compatibility with powerful electrical setups • Stainless steel tips resist rust for a long service life in humid work areas • Moulded rubber design is easy to grip • Connect to banana plugs for a swift and straightforward setup • Sharp tips for precision contactApplications• Consumer electronics • Manufacturing industry • Medical technology • Energy sector

<h3>Fluke TP220-1 Test Probe, 12mm Tip, 1kV, 10A</h3>
<ul>
<li>&nbsp;Voltage Rating	1kV</li>
<li>Current Rating	10A</li>
<li>Colour	Black, Red</li>
<li>Tip Size	12mm</li>
<li>Tip Material	Stainless Steel</li>
</ul>
Features and Benefits
• Both test leads and probes available 
• Durable connection, which guarantees excellent results 
• Single accessories and kits 
• Different safety categories to suit the application 
• Insulated wires
What are test leads?
These leads are connecting cables which are used specifically for Multimeters, attaching a test probe to the end will allow the user to measure the required voltage, current or electrical resistance. As it assists operation with a multimeter, at least two of these types of electrical values are measured.
What are test probes?
Connecting to Fluke multimeters, a set of test probes will measure the device or target for an accurate reading, such as voltage or current. Due to the flexibility and quality produced by Fluke, each probe provides much-needed precision.
FLUKE Test Probes, Needle Design, Black And Red Colour - SureGrip Series - TP220-1
Want to take standard electrical measurements in hard-to-reach work areas? Send in these test probes from FLUKE. Their 12mm needle-shaped tips squeeze comfortably into tight spaces like recessed terminals and are also ideal for testing smaller components. Simply pop them on a pair of leads linked to a multimeter to begin taking readings such as voltage, current and temperature. Thanks to their CAT II 1000V safety rating, they hold their own against impulse voltages of up to 6000V. As the tips are made from durable stainless steel, these probes are built to last.
Features &amp; Benefits
• 10A current rating for compatibility with powerful electrical setups 
• Stainless steel tips resist rust for a long service life in humid work areas 
• Moulded rubber design is easy to grip 
• Connect to banana plugs for a swift and straightforward setup 
• Sharp tips for precision contact
Applications
• Consumer electronics 
• Manufacturing industry 
• Medical technology 
• Energy sector&nbsp;

SureGrip(TM) TP220 industrial probe set

Instruction Sheet - TP220-1

fluke tp220-1 test probe, 12mm tip, 1kv, 10a probe uji tp220-1, ujung 12mm, probes prob ujian petua fluke/福禄克 测试探头，12mm 探针，1kv，10a 福禄克

fluke-tp220-1-test-probe-12mm-tip-1kv-10a

Fluke TL175 Test Lead Kit, Cat Iii, Cat Iv, 10A

Safety Category	CAT III 1000 V, CAT IV 600V

Each test lead covered by two layers of silicone insulation
Extra-heavy strain relief on probe-end and plug-end
Universal input plugs compatible with all instruments that accept standard mm shrouded banana plugs
Ratings: CAT II 1000 V, CAT III 1000 V, CAT IV 600 V, 10 A max., Pollution Degree 2
Probes always show correct category rating for tip being used
Environmental ratings -20°C to +55°C
Conforms to safety standard EN61010-031: 2008

One pair (red, black) Fluke TL175 TwistGuard™ Test Leads
Exposed probe tip length from 19mm to 4mm

FLUKE Multimeter Leads, Test Lead Kit Type, 10A Current Rating - TL175

Get a clear read on electrical signals with this test lead kit from FLUKE. Plug one end into your multimeter and use the probe on the other to measure circuit metrics including voltage, current and resistance. The extendable tips are adjustable to between 4 and 19mm, delivering pinpoint accuracy in different testing setups. Sturdy strain relief at both ends supports a reliable connection that you can rest assured will go the distance.

• Compatible with instruments that accept standard 4mm shrouded banana plugs, so it's a versatile piece of kit
• CAT IV 600V rating indicates it can withstand voltage surges of up to 8000V, for reliable user safety
• Double silicone insulation is resistant to oil and solvent damage, for a longer service life
• Probes always display the correct category rating for the tip exposure used, giving you added peace of mind

• Household outlets
• Switch testing
• Manufacturing facilities
• Automotive industry
 

<h3 class="md-block-header-three">Fluke TL175 Test Lead Kit, Cat Iii, Cat Iv, 10A</h3><ul class="md-block-unordered-list-item"><li> Lead Type	Test Lead Kit</li><li>Product Type	Test leads</li><li>Connector Type	Shrouded</li><li>Current Rating	10A</li><li>Safety Category Voltage	1000 V, 600V</li><li>Safety Category	CAT III 1000 V, CAT IV 600V</li><li>Minimum Operating Temperature	-20°C</li><li>Maximum Operating Temperature	+55°C</li><li>Safety Category Level	CAT III, CAT IV</li></ul>Features &amp; BenefitsEach test lead covered by two layers of silicone insulation Extra-heavy strain relief on probe-end and plug-end Universal input plugs compatible with all instruments that accept standard mm shrouded banana plugs Ratings: CAT II 1000 V, CAT III 1000 V, CAT IV 600 V, 10 A max., Pollution Degree 2 Probes always show correct category rating for tip being used Environmental ratings -20°C to +55°C Conforms to safety standard EN61010-031: 2008What are test leads?These leads are connecting cables which are used specifically for Multimeters, attaching a test probe to the end will allow the user to measure the required voltage, current or electrical resistance. As it assists operation with a multimeter, at least two of these types of electrical values are measured.What are test probes?Connecting to Fluke multimeters, a set of test probes will measure the device or target for an accurate reading, such as voltage or current. Due to the flexibility and quality produced by Fluke, each probe provides much-needed precision.Supplied withOne pair (red, black) Fluke TL175 TwistGuard™ Test Leads Exposed probe tip length from 19mm to 4mmFLUKE Multimeter Leads, Test Lead Kit Type, 10A Current Rating - TL175Get a clear read on electrical signals with this test lead kit from FLUKE. Plug one end into your multimeter and use the probe on the other to measure circuit metrics including voltage, current and resistance. The extendable tips are adjustable to between 4 and 19mm, delivering pinpoint accuracy in different testing setups. Sturdy strain relief at both ends supports a reliable connection that you can rest assured will go the distance.Features &amp; Benefits• Compatible with instruments that accept standard 4mm shrouded banana plugs, so it&#x27;s a versatile piece of kit • CAT IV 600V rating indicates it can withstand voltage surges of up to 8000V, for reliable user safety • Double silicone insulation is resistant to oil and solvent damage, for a longer service life • Probes always display the correct category rating for the tip exposure used, giving you added peace of mindApplications• Household outlets • Switch testing • Manufacturing facilities • Automotive industry

<h3>Fluke TL175 Test Lead Kit, Cat Iii, Cat Iv, 10A</h3>
<ul>
<li>&nbsp;Lead Type	Test Lead Kit</li>
<li>Product Type	Test leads</li>
<li>Connector Type	Shrouded</li>
<li>Current Rating	10A</li>
<li>Safety Category Voltage	1000 V, 600V</li>
<li>Safety Category	CAT III 1000 V, CAT IV 600V</li>
<li>Minimum Operating Temperature	-20°C</li>
<li>Maximum Operating Temperature	+55°C</li>
<li>Safety Category Level	CAT III, CAT IV</li>
</ul>
Features &amp; Benefits
Each test lead covered by two layers of silicone insulation 
Extra-heavy strain relief on probe-end and plug-end 
Universal input plugs compatible with all instruments that accept standard mm shrouded banana plugs 
Ratings: CAT II 1000 V, CAT III 1000 V, CAT IV 600 V, 10 A max., Pollution Degree 2 
Probes always show correct category rating for tip being used 
Environmental ratings -20°C to +55°C 
Conforms to safety standard EN61010-031: 2008
What are test leads?
These leads are connecting cables which are used specifically for Multimeters, attaching a test probe to the end will allow the user to measure the required voltage, current or electrical resistance. As it assists operation with a multimeter, at least two of these types of electrical values are measured.
What are test probes?
Connecting to Fluke multimeters, a set of test probes will measure the device or target for an accurate reading, such as voltage or current. Due to the flexibility and quality produced by Fluke, each probe provides much-needed precision.
Supplied with
One pair (red, black) Fluke TL175 TwistGuard™ Test Leads 
Exposed probe tip length from 19mm to 4mm
FLUKE Multimeter Leads, Test Lead Kit Type, 10A Current Rating - TL175
Get a clear read on electrical signals with this test lead kit from FLUKE. Plug one end into your multimeter and use the probe on the other to measure circuit metrics including voltage, current and resistance. The extendable tips are adjustable to between 4 and 19mm, delivering pinpoint accuracy in different testing setups. Sturdy strain relief at both ends supports a reliable connection that you can rest assured will go the distance.
Features &amp; Benefits
• Compatible with instruments that accept standard 4mm shrouded banana plugs, so it's a versatile piece of kit 
• CAT IV 600V rating indicates it can withstand voltage surges of up to 8000V, for reliable user safety 
• Double silicone insulation is resistant to oil and solvent damage, for a longer service life 
• Probes always display the correct category rating for the tip exposure used, giving you added peace of mind
Applications
• Household outlets 
• Switch testing 
• Manufacturing facilities 
• Automotive industry 
&nbsp;

TL175 Data Sheet

Instruction Sheet - TL175

fluke tl175 test lead kit, cat iii, iv, 10a kit kabel uji tl175, electrical power testing pengujian daya listrik petunjuk ujian tenaga elektrik fluke/福禄克 测试引线套件，cat iii、cat iv，10a 电力测试 福禄克

fluke-tl175-test-lead-kit-cat-iii-cat-iv-10a

Fluke TL220-1 Industrial Test Lead Kit, Cat Iii, Cat Iv, 10A

FLUKE Industrial Test Lead Kit, Banana Connector Type, 10A Current Rating - TL220-1

When you need an assortment of adaptable accessories for your multimeter, grab this industrial test lead kit from FLUKE. The probes feature SureGrip technology for a reliable hold even when your hands are slippery, which makes field measurements a cinch. Each kit comes complete with a TP220 test probe, a TL222 silicone test lead set and an AC220 alligator clip set so you'll always have the right tool for the job. Because the 4mm banana plugs follow a standard connector design, they're widely compatible with your existing devices.

• Generous 1.5m lead length offers easy manoeuvrability in hard-to-reach spots
• Nickel-plated jaws resist corrosion, so deliver a long service life
• Sharp 12mm stainless steel tip provides reliable contact for results you can rely on
• Meets 1000V CAT III and 600V CAT IV requirements, so the kit is a safe choice for industrial use

• Factory automation
• Heavy industrial equipment
• Automotive servicing 

<h3 class="md-block-header-three">Fluke TL220-1 Industrial Test Lead Kit, Cat Iii, Cat Iv, 10A</h3><ul class="md-block-unordered-list-item"><li> Lead Type	Industrial Test Lead Kit</li><li>Connector Type	Straight to Right Angle</li><li>Lead Length	1.6m</li><li>Current Rating	10A</li><li>Safety Category Voltage	1000 V, 600V</li><li>Safety Category	CAT III 1000 V, CAT IV 600V</li><li>Safety Category Level	CAT III, CAT IV</li></ul>Features and Benefits• Both test leads and probes available • Durable connection, which guarantees excellent results • Single accessories and kits • Different safety categories to suit the application • Insulated wiresWhat are test leads?These leads are connecting cables which are used specifically for Multimeters, attaching a test probe to the end will allow the user to measure the required voltage, current or electrical resistance. As it assists operation with a multimeter, at least two of these types of electrical values are measured.What are test probes?Connecting to Fluke multimeters, a set of test probes will measure the device or target for an accurate reading, such as voltage or current. Due to the flexibility and quality produced by Fluke, each probe provides much-needed precision.FLUKE Industrial Test Lead Kit, Banana Connector Type, 10A Current Rating - TL220-1When you need an assortment of adaptable accessories for your multimeter, grab this industrial test lead kit from FLUKE. The probes feature SureGrip technology for a reliable hold even when your hands are slippery, which makes field measurements a cinch. Each kit comes complete with a TP220 test probe, a TL222 silicone test lead set and an AC220 alligator clip set so you&#x27;ll always have the right tool for the job. Because the 4mm banana plugs follow a standard connector design, they&#x27;re widely compatible with your existing devices.Features &amp; Benefits• Generous 1.5m lead length offers easy manoeuvrability in hard-to-reach spots • Nickel-plated jaws resist corrosion, so deliver a long service life • Sharp 12mm stainless steel tip provides reliable contact for results you can rely on • Meets 1000V CAT III and 600V CAT IV requirements, so the kit is a safe choice for industrial useApplications• Factory automation • Heavy industrial equipment • Automotive servicing

<h3>Fluke TL220-1 Industrial Test Lead Kit, Cat Iii, Cat Iv, 10A</h3>
<ul>
<li>&nbsp;Lead Type	Industrial Test Lead Kit</li>
<li>Connector Type	Straight to Right Angle</li>
<li>Lead Length	1.6m</li>
<li>Current Rating	10A</li>
<li>Safety Category Voltage	1000 V, 600V</li>
<li>Safety Category	CAT III 1000 V, CAT IV 600V</li>
<li>Safety Category Level	CAT III, CAT IV</li>
</ul>
Features and Benefits
• Both test leads and probes available 
• Durable connection, which guarantees excellent results 
• Single accessories and kits 
• Different safety categories to suit the application 
• Insulated wires
What are test leads?
These leads are connecting cables which are used specifically for Multimeters, attaching a test probe to the end will allow the user to measure the required voltage, current or electrical resistance. As it assists operation with a multimeter, at least two of these types of electrical values are measured.
What are test probes?
Connecting to Fluke multimeters, a set of test probes will measure the device or target for an accurate reading, such as voltage or current. Due to the flexibility and quality produced by Fluke, each probe provides much-needed precision.
FLUKE Industrial Test Lead Kit, Banana Connector Type, 10A Current Rating - TL220-1
When you need an assortment of adaptable accessories for your multimeter, grab this industrial test lead kit from FLUKE. The probes feature SureGrip technology for a reliable hold even when your hands are slippery, which makes field measurements a cinch. Each kit comes complete with a TP220 test probe, a TL222 silicone test lead set and an AC220 alligator clip set so you'll always have the right tool for the job. Because the 4mm banana plugs follow a standard connector design, they're widely compatible with your existing devices.
Features &amp; Benefits
• Generous 1.5m lead length offers easy manoeuvrability in hard-to-reach spots 
• Nickel-plated jaws resist corrosion, so deliver a long service life 
• Sharp 12mm stainless steel tip provides reliable contact for results you can rely on 
• Meets 1000V CAT III and 600V CAT IV requirements, so the kit is a safe choice for industrial use
Applications
• Factory automation 
• Heavy industrial equipment 
• Automotive servicing&nbsp;

SureGrip TL220 industrial test lead kit

Datasheet - TL220-1

fluke tl220-1 industrial test lead kit, cat iii, iv, 10a kit kabel uji industri tl220-1, multimeter leads utama ujian perindustrian fluke/福禄克 工业测试引线套件，cat iii、cat iv，10a 福禄克

fluke-tl220-1-industrial-test-lead-kit-cat-iii-cat-iv-10a

Fluke TL910 Electronic Test Lead Kit, Cat Iii, Cat Iv, 3A

• Various series, including TL910, TL224 and 80BK (probe)
• Durable connection, which guarantees excellent results
• Single accessories and kits
• Different safety categories to suit the application
• Insulated wires

FLUKE Electronic Test Lead Kit, 3A Current Rating, 1mm Tip Width - TL910

Need a heavy-duty test lead that can tackle the toughest jobs in CAT III and IV environments? Pair these multimeter leads from FLUKE with your testing equipment to get the ball rolling. As the pins are 102mm long, working your way into hard-to-reach areas is a walk in the park. Both the gold-plated and stainless steel tips are corrosion-resistant, delivering reliable measurements you can bank on.

• Spring-loaded pins absorb impact to stop them from snapping under pressure, for a longer service life
• Long 1m cable lets you comfortably test items in arm's reach without tugging at the multimeter
• Can be used with any instrument that fits 4mm shrouded banana plugs, for wide compatibility

• Electrical engineering
• Energy sector
• Telecommunications systems
• Manufacturing facilities
 

<h3 class="md-block-header-three">Fluke TL910 Electronic Test Lead Kit, Cat Iii, Cat Iv, 3A</h3><ul class="md-block-unordered-list-item"><li> Lead Type	Electronic Test Lead Kit</li><li>Product Type	Test Probe</li><li>Connector Type	Spring Loaded Pin</li><li>Lead Length	1m</li><li>Current Rating	3A</li><li>Safety Category Voltage	1000 V, 600V</li><li>Safety Category	CAT III 1000 V, CAT IV 600V</li><li>Safety Category Level	CAT III, CAT IV</li></ul>Features and Benefits• Various series, including TL910, TL224 and 80BK (probe) • Durable connection, which guarantees excellent results • Single accessories and kits • Different safety categories to suit the application • Insulated wiresWhat are test leads?These leads are connecting cables which are used specifically for Multimeters, attaching a test probe to the end will allow the user to measure the required voltage, current or electrical resistance. As it assists operation with a multimeter, at least two of these types of electrical values are measured.What are test probes?Connecting to Fluke multimeters, a set of test probes will measure the device or target for an accurate reading, such as voltage or current. Due to the flexibility and quality produced by Fluke, each probe provides much-needed precision.FLUKE Electronic Test Lead Kit, 3A Current Rating, 1mm Tip Width - TL910Need a heavy-duty test lead that can tackle the toughest jobs in CAT III and IV environments? Pair these multimeter leads from FLUKE with your testing equipment to get the ball rolling. As the pins are 102mm long, working your way into hard-to-reach areas is a walk in the park. Both the gold-plated and stainless steel tips are corrosion-resistant, delivering reliable measurements you can bank on.Features &amp; Benefits• Spring-loaded pins absorb impact to stop them from snapping under pressure, for a longer service life • Long 1m cable lets you comfortably test items in arm&#x27;s reach without tugging at the multimeter • Can be used with any instrument that fits 4mm shrouded banana plugs, for wide compatibilityApplications• Electrical engineering • Energy sector • Telecommunications systems • Manufacturing facilities

<h3>Fluke TL910 Electronic Test Lead Kit, Cat Iii, Cat Iv, 3A</h3>
<ul>
<li>&nbsp;Lead Type	Electronic Test Lead Kit</li>
<li>Product Type	Test Probe</li>
<li>Connector Type	Spring Loaded Pin</li>
<li>Lead Length	1m</li>
<li>Current Rating	3A</li>
<li>Safety Category Voltage	1000 V, 600V</li>
<li>Safety Category	CAT III 1000 V, CAT IV 600V</li>
<li>Safety Category Level	CAT III, CAT IV</li>
</ul>
Features and Benefits
• Various series, including TL910, TL224 and 80BK (probe) 
• Durable connection, which guarantees excellent results 
• Single accessories and kits 
• Different safety categories to suit the application 
• Insulated wires
What are test leads?
These leads are connecting cables which are used specifically for Multimeters, attaching a test probe to the end will allow the user to measure the required voltage, current or electrical resistance. As it assists operation with a multimeter, at least two of these types of electrical values are measured.
What are test probes?
Connecting to Fluke multimeters, a set of test probes will measure the device or target for an accurate reading, such as voltage or current. Due to the flexibility and quality produced by Fluke, each probe provides much-needed precision.
FLUKE Electronic Test Lead Kit, 3A Current Rating, 1mm Tip Width - TL910
Need a heavy-duty test lead that can tackle the toughest jobs in CAT III and IV environments? Pair these multimeter leads from FLUKE with your testing equipment to get the ball rolling. As the pins are 102mm long, working your way into hard-to-reach areas is a walk in the park. Both the gold-plated and stainless steel tips are corrosion-resistant, delivering reliable measurements you can bank on.
Features &amp; Benefits
• Spring-loaded pins absorb impact to stop them from snapping under pressure, for a longer service life 
• Long 1m cable lets you comfortably test items in arm's reach without tugging at the multimeter 
• Can be used with any instrument that fits 4mm shrouded banana plugs, for wide compatibility
Applications
• Electrical engineering 
• Energy sector 
• Telecommunications systems 
• Manufacturing facilities 
&nbsp;

Fluke TL910 Electronic Test Probes with Replacement Tips

Datasheet - TL910

fluke tl910 electronic test lead kit, cat iii, iv, 3a kit kabel uji elektronik tl910, electrical power testing pengujian daya listrik plumbum ujian tenaga elektrik fluke/福禄克 电子测试引线套件，cat iii、cat iv，3a 电力测试 福禄克

fluke-tl910-electronic-test-lead-kit-cat-iii-cat-iv-3a

Fluke TL75-1 Test Lead Kit, Cat Iii, Cat Iv, 10A

FLUKE Multimeter Leads, PVC Insulation Type, 1.22m Lead Length - TL75-1

Need to connect a high-precision probe to your multimeter? Count on this test lead kit from FLUKE. With a sturdy 4mm plug on one end and a PVC-insulated probe on the other, it's an all-in-one measurement solution that saves time and effort in the field. Because it's rated for CAT III, it's a safe choice for general-purpose measurements in a heavy-industrial environment. A right-angled connector reduces strain to help keep this hardy gadget running at peak condition for longer. Thanks to its standard banana plug design, it's widely compatible with your existing devices for ease of use.

• PVC insulator is abrasion-resistant for a long service life
• Generous 1.22m cable length gives you plenty of room to manoeuvre
• Comfort-grip probe handle makes it easy to use
• Shrouded plugs minimise the chances of accidental contact for maximum user safety

• Electrical installations
• Industrial circuit breakers
• Distribution wiring 

<h3 class="md-block-header-three">Fluke TL75-1 Test Lead Kit, Cat Iii, Cat Iv, 10A</h3><ul class="md-block-unordered-list-item"><li> Lead Type	Test Lead Kit</li><li>Connector Type	Banana Plug</li><li>Lead Length	1.22m</li><li>Current Rating	10A</li><li>Safety Category Voltage	1000 V, 600V</li><li>Safety Category	CAT III 1000 V, CAT IV 600V</li><li>Safety Category Level	CAT III, CAT IV</li></ul>Features and Benefits• Both test leads and probes available • Durable connection, which guarantees excellent results • Single accessories and kits • Different safety categories to suit the application • Insulated wiresWhat are test leads?These leads are connecting cables which are used specifically for Multimeters, attaching a test probe to the end will allow the user to measure the required voltage, current or electrical resistance. As it assists operation with a multimeter, at least two of these types of electrical values are measured.What are test probes?Connecting to Fluke multimeters, a set of test probes will measure the device or target for an accurate reading, such as voltage or current. Due to the flexibility and quality produced by Fluke, each probe provides much-needed precision.FLUKE Multimeter Leads, PVC Insulation Type, 1.22m Lead Length - TL75-1Need to connect a high-precision probe to your multimeter? Count on this test lead kit from FLUKE. With a sturdy 4mm plug on one end and a PVC-insulated probe on the other, it&#x27;s an all-in-one measurement solution that saves time and effort in the field. Because it&#x27;s rated for CAT III, it&#x27;s a safe choice for general-purpose measurements in a heavy-industrial environment. A right-angled connector reduces strain to help keep this hardy gadget running at peak condition for longer. Thanks to its standard banana plug design, it&#x27;s widely compatible with your existing devices for ease of use.Features &amp; Benefits• PVC insulator is abrasion-resistant for a long service life • Generous 1.22m cable length gives you plenty of room to manoeuvre • Comfort-grip probe handle makes it easy to use • Shrouded plugs minimise the chances of accidental contact for maximum user safetyApplications• Electrical installations • Industrial circuit breakers • Distribution wiring

<h3>Fluke TL75-1 Test Lead Kit, Cat Iii, Cat Iv, 10A</h3>
<ul>
<li>&nbsp;Lead Type	Test Lead Kit</li>
<li>Connector Type	Banana Plug</li>
<li>Lead Length	1.22m</li>
<li>Current Rating	10A</li>
<li>Safety Category Voltage	1000 V, 600V</li>
<li>Safety Category	CAT III 1000 V, CAT IV 600V</li>
<li>Safety Category Level	CAT III, CAT IV</li>
</ul>
Features and Benefits
• Both test leads and probes available 
• Durable connection, which guarantees excellent results 
• Single accessories and kits 
• Different safety categories to suit the application 
• Insulated wires
What are test leads?
These leads are connecting cables which are used specifically for Multimeters, attaching a test probe to the end will allow the user to measure the required voltage, current or electrical resistance. As it assists operation with a multimeter, at least two of these types of electrical values are measured.
What are test probes?
Connecting to Fluke multimeters, a set of test probes will measure the device or target for an accurate reading, such as voltage or current. Due to the flexibility and quality produced by Fluke, each probe provides much-needed precision.
FLUKE Multimeter Leads, PVC Insulation Type, 1.22m Lead Length - TL75-1
Need to connect a high-precision probe to your multimeter? Count on this test lead kit from FLUKE. With a sturdy 4mm plug on one end and a PVC-insulated probe on the other, it's an all-in-one measurement solution that saves time and effort in the field. Because it's rated for CAT III, it's a safe choice for general-purpose measurements in a heavy-industrial environment. A right-angled connector reduces strain to help keep this hardy gadget running at peak condition for longer. Thanks to its standard banana plug design, it's widely compatible with your existing devices for ease of use.
Features &amp; Benefits
• PVC insulator is abrasion-resistant for a long service life 
• Generous 1.22m cable length gives you plenty of room to manoeuvre 
• Comfort-grip probe handle makes it easy to use 
• Shrouded plugs minimise the chances of accidental contact for maximum user safety
Applications
• Electrical installations 
• Industrial circuit breakers 
• Distribution wiring&nbsp;

fluke tl75-1 test lead kit, cat iii, iv, 10a kit kabel uji tl75-1, electrical power testing pengujian daya listrik plumbum ujian tenaga elektrik fluke/福禄克 测试引线套件，cat iii、cat iv，10a 电力测试 福禄克