ELORA

Iwata

MISUMI

MITUTOYO

SECFETRONIK

Electricals

electricals

Cable Gland

cable-gland

Test & Measurement

test-measurement

Feeler Gauges

feeler-gauges

Lifting Equipments

lifting-equipments

Shackles

shackles

Mechanical Power Transmissions

mechanical-power-transmissions

Timing Belts

timing-belts

Ultrasonic Thickness Gauges

ultrasonic-thickness-gauges

Fasteners

fasteners

Washers

washers

Weight, Force & Pressure Gauges

weight-force-pressure-gauges

Misumi 

buyerIntroduction

Misumi C-HTBN920H5M-250 Timing Belts HTD5M 184 Width 25 Mm 5M

misumi c-htbn920h5m-250 timing belts htd5m 184 width 25mm 5m belt lebar sabuk waktu tali pinggang pemasa talipinggang pemasaan misumi/米思米 同步带 宽度 毫米 米思米

misumi-c-htbn920h5m-250-timing-belts-htd5m-184-width-25-mm-5m

( 0.05 – 1mm / 20 leaves / stepss of 0.05mm )  

Consists of seizes 0.05, 0.10, 0.15, 0.20, 0.25, 0.30, 0.35, 0.40, 0.45, 0.50, 0.55, 0.60, 0.65, 0.70, 0.75, 0.80, 0.85, 0.90, 0.95 & 1.00mm

• Metric thickness gages are available with tapered leaves. 

• Each leaf is marked with its thickness. 

• Each leaf is detachable if necessary. 

Thickness Gages SERIES 184( 0.05 – 1mm / 20 leaves / stepss of 0.05mm )  set of 20 leaves Consists of seizes 0.05, 0.10, 0.15, 0.20, 0.25, 0.30, 0.35, 0.40, 0.45, 0.50, 0.55, 0.60, 0.65, 0.70, 0.75, 0.80, 0.85, 0.90, 0.95 &amp; 1.00mm• Metric thickness gages are available with tapered leaves. • Each leaf is marked with its thickness. • Each leaf is detachable if necessary.

Thickness Gages SERIES 184
( 0.05 – 1mm / 20 leaves / stepss of 0.05mm ) &nbsp;
set of 20 leaves&nbsp;
Consists of seizes 0.05, 0.10, 0.15, 0.20, 0.25, 0.30, 0.35, 0.40, 0.45, 0.50, 0.55, 0.60, 0.65, 0.70, 0.75, 0.80, 0.85, 0.90, 0.95 &amp; 1.00mm
• Metric thickness gages are available with tapered leaves.&nbsp;
• Each leaf is marked with its thickness.&nbsp;
• Each leaf is detachable if necessary.&nbsp;

Spec Sheet

Other Measuring Tools

SS Lim

Thickness Gages Series 184-304S

thickness gages series 184-304s ketebalan ultrasonic gauges mitutoyo mitutoyo/三丰 厚度计系列184-304s 三丰

thickness-gages-series-184-304s

Misumi C-TBN920H100 Timing Belts H 184 Width 25.4 Mm H

misumi c-tbn920h100 timing belts 184 width 25.4 mm belt lebar 25,4 sabuk waktu tali pinggang pemasa talipinggang pemasaan misumi/米思米 正时皮带 宽度 同步带 米思米

misumi-c-tbn920h100-timing-belts-h-184-width-25-4-mm-h

Shim Ring, Inner Diameter 25mm X Outer Diameter 30mm, Pack of 10 (Available in Brass, Carbon Steel and 304 Stainless Steel)

Shim Rings, also known as Shim Washers, are available in various thickness to align gaps and uneven surfaces. Shim washers look similar to flat washers, but are different in their usage and purpose.

Produced in Japan, these are made to extremely precise tolerances and are free from burrs. We are able to offer shim washers in different materials such as Brass, Carbon Steel (SPCC) and 304 stainless steel.

Use them for screws, axles, bearing faces and machine bases. Depending on the material, thickness variants range from 0.01mm to 1mm. Each package contains 10 pcs of the same thickness in the above given inner diameter and outer diameter sizes.

Shim washers and flat washers are inherently different in their purpose and tolerances. Here are three differences that set shim washers apart from flat washers.

They serve a different purpose in life. While flat washers are used for fastening, load distribution and surface protection, shim washers are used for gap alignment. Flat washers are usually used together with screws, bolts or nuts. While shim washers can be used in the same way, they can be slotted into threaded screws or axles to carry out their job.

Based on DIN125A standard, flat washers are produced with nominal dimensions with no tolerance values given. Our flat washers are supplied with the understanding that the thickness variance will range from 0 to 0.2mm. For example, an M3 flat washer will have thickness ranging from 0.4mm to 0.6mm, even in the same batch!

Shim washers are produced to close tolerances, usually up to 0.2mm for ID and OD, and as small as +/-0.02mm for thickness. 

In short, shim washers are more precise than flat washers because they have to be. During gap alignment or leveling, minor differences in thickness and diameters must be taken into account for fear of misalignment. 

Flat washers usually have a single thickness based on a given ID and OD. For example, an M3 flat washer with ID 3.2mm and OD 6mm will have thickness 0.4mm. If you are lucky (or not), you might find some with 0.5mm in the same batch. Not reassuring? Not to worry, being used for fastening, the thickness of flat washers is usually not a focal point.

Product Description: Shim Ring (Also known as Shim Washer)

Manufacturer: Iwata Manufacturing Co., Ltd

Materials: Carbon Steel (SPCC), Brass and 304 Stainless Steel

<h3 class="md-block-header-three">Shim Ring, Inner Diameter 25mm X Outer Diameter 30mm, Pack of 10 (Available in Brass, Carbon Steel and 304 Stainless Steel)</h3>Shim Rings, also known as Shim Washers, are available in various thickness to align gaps and uneven surfaces. Shim washers look similar to flat washers, but are different in their usage and purpose.Produced in Japan, these are made to extremely precise tolerances and are free from burrs. We are able to offer shim washers in different materials such as Brass, Carbon Steel (SPCC) and 304 stainless steel.Use them for screws, axles, bearing faces and machine bases. Depending on the material, thickness variants range from 0.01mm to 1mm. Each package contains 10 pcs of the same thickness in the above given inner diameter and outer diameter sizes.Shim washers and flat washers are inherently different in their purpose and tolerances. Here are three differences that set shim washers apart from flat washers.Purpose And UsageThey serve a different purpose in life. While flat washers are used for fastening, load distribution and surface protection, shim washers are used for gap alignment. Flat washers are usually used together with screws, bolts or nuts. While shim washers can be used in the same way, they can be slotted into threaded screws or axles to carry out their job.TolerancesBased on DIN125A standard, flat washers are produced with nominal dimensions with no tolerance values given. Our flat washers are supplied with the understanding that the thickness variance will range from 0 to 0.2mm. For example, an M3 flat washer will have thickness ranging from 0.4mm to 0.6mm, even in the same batch!Shim washers are produced to close tolerances, usually up to 0.2mm for ID and OD, and as small as +/-0.02mm for thickness. In short, shim washers are more precise than flat washers because they have to be. During gap alignment or leveling, minor differences in thickness and diameters must be taken into account for fear of misalignment. Available ThicknessFlat washers usually have a single thickness based on a given ID and OD. For example, an M3 flat washer with ID 3.2mm and OD 6mm will have thickness 0.4mm. If you are lucky (or not), you might find some with 0.5mm in the same batch. Not reassuring? Not to worry, being used for fastening, the thickness of flat washers is usually not a focal point.Product Description: Shim Ring (Also known as Shim Washer)Manufacturer: Iwata Manufacturing Co., LtdMaterials: Carbon Steel (SPCC), Brass and 304 Stainless SteelID: 25mmOD: 30mmThickness: 0.01mm to 1mm.Quantity Per Package: 10 pcsCountry of Origin: Japan

<h3>Shim Ring, Inner Diameter 25mm X Outer Diameter 30mm, Pack of 10 (Available in Brass, Carbon Steel and 304 Stainless Steel)</h3>
Shim Rings, also known as Shim Washers, are available in various thickness to align gaps and uneven surfaces. Shim washers look similar to flat washers, but are different in their usage and purpose.
Produced in Japan, these are made to extremely precise tolerances and are free from burrs. We are able to offer shim washers in different materials such as Brass, Carbon Steel (SPCC) and 304 stainless steel.
Use them for screws, axles, bearing faces and machine bases. Depending on the material, thickness variants range from 0.01mm to 1mm. Each package contains 10 pcs of the same thickness in the above given inner diameter and outer diameter sizes.
Shim washers and flat washers are inherently different in their purpose and tolerances. Here are three differences that set shim washers apart from flat washers.
Purpose And Usage
They serve a different purpose in life. While flat washers are used for fastening, load distribution and surface protection, shim washers are used for gap alignment. Flat washers are usually used together with screws, bolts or nuts. While shim washers can be used in the same way, they can be slotted into threaded screws or axles to carry out their job.
Tolerances
Based on DIN125A standard, flat washers are produced with nominal dimensions with no tolerance values given. Our flat washers are supplied with the understanding that the thickness variance will range from 0 to 0.2mm. For example, an M3 flat washer will have thickness ranging from 0.4mm to 0.6mm, even in the same batch!
Shim washers are produced to close tolerances, usually up to 0.2mm for ID and OD, and as small as +/-0.02mm for thickness. 
In short, shim washers are more precise than flat washers because they have to be. During gap alignment or leveling, minor differences in thickness and diameters must be taken into account for fear of misalignment. 
Available Thickness
Flat washers usually have a single thickness based on a given ID and OD. For example, an M3 flat washer with ID 3.2mm and OD 6mm will have thickness 0.4mm. If you are lucky (or not), you might find some with 0.5mm in the same batch. Not reassuring? Not to worry, being used for fastening, the thickness of flat washers is usually not a focal point.
Product Description: Shim Ring (Also known as Shim Washer)
Manufacturer: Iwata Manufacturing Co., Ltd
Materials: Carbon Steel (SPCC), Brass and 304 Stainless Steel
ID: 25mm
OD: 30mm
Thickness: 0.01mm to 1mm.
Quantity Per Package: 10 pcs
Country of Origin: Japan

Precision Brand

Ergomat

Southco

Others

DYMON

SCRUBS

IT Accessories

Machinery Accessories

Screw

Ball Bearings

Painting Tools

Hooks & Eyes

Drill Bits & Drill Bit Sets

Rubber Seals

Other Tools

Hose Clamp

Leland

Iwata Shim Ring, Inner Diameter 25mm X Outer Diameter 30mm, Pack of 10

iwata shim ring, inner diameter 25mm outer 30mm, pack 10 cincin iwata, dalam luar kemasan buah washers pek iwata/岩田 垫片环，内径 25 毫米 外径 30 毫米，10 个一包 岩田

iwata-shim-ring-inner-diameter-25mm-x-outer-diameter-30mm-pack-of-10

Carbon Steel ID 25mm x OD 30mm x 0.10mm PN RF025030010, Pack of 10 Pieces

Carbon Steel ID 25mm x OD 30mm x 0.15mm PN RF025030015, Pack of 10 Pieces

Carbon Steel ID 25mm x OD 30mm x 0.20mm PN RF025030020, Pack of 10 Pieces

Carbon Steel ID 25mm x OD 30mm x 0.30mm PN RF025030030, Pack of 10 Pieces

Carbon Steel ID 25mm x OD 30mm x 0.50mm PN RF025030050, Pack of 10 Pieces

Carbon Steel ID 25mm x OD 30mm x 1mm PN RF025030100, Pack of 10 Pieces

Brass ID 25mm x OD 30mm x 0.05mm PN RB025030005, Pack of 10 Pieces

Brass ID 25mm x OD 30mm x 0.10mm PN RB025030010, Pack of 10 Pieces

Brass ID 25mm x OD 30mm x 0.15mm PN RB025030015, Pack of 10 Pieces

Brass ID 25mm x OD 30mm x 0.20mm PN RB025030020, Pack of 10 Pieces

Brass ID 25mm x OD 30mm x 0.30mm PN RB025030030, Pack of 10 Pieces

Brass ID 25mm x OD 30mm x 0.50mm PN RB0025030050, Pack of 10 Pieces

Brass ID 25mm x OD 30mm x 1mm PN RB025030100, Pack of 10 Pieces

304 SST ID 25mm x OD 30mm x 0.01mm PN RS025030001, Pack of 10 Pieces

304 SST ID 25mm x OD 30mm x 0.02mm PN RS025030002, Pack of 10 Pieces

304 SST ID 25mm x OD 30mm x 0.03mm PN RS025030003, Pack of 10 Pieces

304 SST ID 25mm x OD 30mm x 0.05mm PN RS025030005, Pack of 10 Pieces

304 SST ID 25mm x OD 30mm x 0.10mm PN RS025030010, Pack of 10 Pieces

304 SST ID 25mm x OD 30mm x 0.15mm PN RS025030015, Pack of 10 Pieces

304 SST ID 25mm x OD 30mm x 0.20mm PN RS025030020, Pack of 10 Pieces

304 SST ID 25mm x OD 30mm x 0.30mm PN RS025030030, Pack of 10 Pieces

304 SST ID 25mm x OD 30mm x 0.50mm PN RS025030050, Pack of 10 Pieces

304 SST ID 25mm x OD 30mm x 1mm PN RS025030100, Pack of 10 Pieces

Material

D-Shackles with collared pins are designed for application where a more secure tight pin is required.

For various uses and securing applications.

Material: Stainless Steel 304 / 316 Marine Grade

Size Guide in MM (Refer to photos for ABCD)

M4 - A-15mm B-8mm C-25mm D-16mm (BL: 550 kgs)

M5 - A-20mm B-10mm C-30mm D-20mm (BL: 1000 kgs)

M6 - A-25mm B-12mm C-37mm D-24mm (BL: 1700 kgs)

M8 - A-32mm B-16mm C-48mm D-32mm (BL: 2800 kgs)

M10 - A-40mm B-20mm C-60mm D-40mm (BL: 4500 kgs)

M12 - A-47mm B-24mm C-80mm D-48mm (BL: 6000 kgs)

D-Shackles with collared pins are designed for application where a more secure tight pin is required.For various uses and securing applications.Material: Stainless Steel 304 / 316 Marine GradeSize Guide in MM (Refer to photos for ABCD)<ol class="md-block-ordered-list-item"><li>M4 - A-15mm B-8mm C-25mm D-16mm (BL: 550 kgs)</li><li>M5 - A-20mm B-10mm C-30mm D-20mm (BL: 1000 kgs)</li><li>M6 - A-25mm B-12mm C-37mm D-24mm (BL: 1700 kgs)</li><li>M8 - A-32mm B-16mm C-48mm D-32mm (BL: 2800 kgs)</li><li>M10 - A-40mm B-20mm C-60mm D-40mm (BL: 4500 kgs)</li><li>M12 - A-47mm B-24mm C-80mm D-48mm (BL: 6000 kgs)</li><li>M16 - A-65mm B-34mm C-92mm D-54mm</li></ol>

D-Shackles with collared pins are designed for application where a more secure tight pin is required.
For various uses and securing applications.
Material: Stainless Steel 304 / 316 Marine Grade
Size Guide in MM (Refer to photos for ABCD)
<ol>
<li>M4 - A-15mm B-8mm C-25mm D-16mm (BL: 550 kgs)</li>
<li>M5 - A-20mm B-10mm C-30mm D-20mm (BL: 1000 kgs)</li>
<li>M6 - A-25mm B-12mm C-37mm D-24mm (BL: 1700 kgs)</li>
<li>M8 - A-32mm B-16mm C-48mm D-32mm (BL: 2800 kgs)</li>
<li>M10 - A-40mm B-20mm C-60mm D-40mm (BL: 4500 kgs)</li>
<li>M12 - A-47mm B-24mm C-80mm D-48mm (BL: 6000 kgs)</li>
<li>M16 - A-65mm B-34mm C-92mm D-54mm</li>
</ol>

Adhesives & Glues

Other Equipment

Sealants

Kaelen Hoon

Stainless Steel 304/316 D-shackle

stainless steel 304/316 d-shackle d-belenggu shackles oem keluli tahan karat oem/oem代工 不锈钢 型卸扣 oem代工

stainless-steel-304-316-d-shackle

M4 SS304

M5 SS304

M6 SS304

M8 SS304

M10 SS304

M12 SS304

M16 SS304

M6 SS316

M8 SS316

Size & Material

Thickness (mm)  0,03, 0,04, 0,05, 0,06, 0,07, 0,08, 0,09, 0,10, 0,15, 0,20, 0,25, 0,30, 0,35, 0,40, 0,45, 0,50, 0,55, 0,60, 0,65, 0,70, 0,75, 0,80, 0,85, 0,90, 0,95, 1,00 

<h3 class="md-block-header-three">Elora Feeler Gauges 188-26M </h3><ul class="md-block-unordered-list-item"><li>standard pattern with protection grip</li><li>retractable blades</li><li>blade length 100 mm</li><li>conical blades</li><li>spring band steel</li><li>Thickness (mm) 0,03, 0,04, 0,05, 0,06, 0,07, 0,08, 0,09, 0,10, 0,15, 0,20, 0,25, 0,30, 0,35, 0,40, 0,45, 0,50, 0,55, 0,60, 0,65, 0,70, 0,75, 0,80, 0,85, 0,90, 0,95, 1,00 </li></ul>

<h3>Elora Feeler Gauges 188-26M&nbsp;</h3>
<ul>
<li>standard pattern with protection grip</li>
<li>retractable blades</li>
<li>blade length 100 mm</li>
<li>conical blades</li>
<li>spring band steel</li>
<li>Thickness (mm) 0,03, 0,04, 0,05, 0,06, 0,07, 0,08, 0,09, 0,10, 0,15, 0,20, 0,25, 0,30, 0,35, 0,40, 0,45, 0,50, 0,55, 0,60, 0,65, 0,70, 0,75, 0,80, 0,85, 0,90, 0,95, 1,00&nbsp;</li>
</ul>

FORCE

SATA

Nexus

Impact Sockets

Sockets

Ring Spanners

Socket Sets

Flank Sockets

Open End Spanners

Combination Spanners

Hex Keys & Sets

Screwdrivers

Screwdriver Bits & Bit Set

Mr Jones Ong

Elora Feeler Gauges 188-26M

elora feeler gauges 188-26m pengukur elora/埃洛拉 塞尺 埃洛拉

elora-feeler-gauges-188-26m

M20 METAL CABLE GLAND with Locknut, IP68 BRASS

Temperature Limited: min. -40°C up to max. 100°C, short-term 120°C

· Connection is closer with O-ring and more secured with entire rubber seal.

M20 METAL CABLE GLAND with Locknut, IP68 BRASSThread Size &amp; Pitch: M20 x 1.5Material: Brass, Nickel platedPlastic Material: PA66Cable Diameter Range: 8 mm – 14 mmThread Length (GL): 8 mmHeight (H): 22 mmSealing Material: SiliconLocknut Included: YesTemperature Limited: min. -40°C up to max. 100°C, short-term 120°CIP RATING: IP68Approvals: UL, CE, ROHSFeature: · Connection is closer with O-ring and more secured with entire rubber seal.

&nbsp;&nbsp;&nbsp;&nbsp;
M20 METAL CABLE GLAND with Locknut, IP68 BRASS
Thread Size &amp; Pitch: M20 x 1.5
Material: Brass, Nickel plated
Plastic Material: PA66
Cable Diameter Range: 8 mm – 14 mm
Thread Length (GL): 8 mm
Height (H): 22 mm
Sealing Material: Silicon
Locknut Included: Yes
Temperature Limited: min. -40°C up to max. 100°C, short-term 120°C
IP RATING: IP68
Approvals: UL, CE, ROHS
Feature:&nbsp;
· Connection is closer with O-ring and more secured with entire rubber seal.

Specifications

Electrical Switches

Van Molo

Secfetronik M20 Metal Cable Gland With Locknut, Ip68 Nickel Plated Brass

secfetronik m20 metal cable gland locknut, ip68 nickel plated brass kabel logam dengan mur pengunci, kuningan berlapis nikel kelenjar loyang bersalut 金属电缆密封套带锁紧螺母，ip68 镀镍黄铜 电缆接头

secfetronik-m20-metal-cable-gland-with-locknut-ip68-nickel-plated-brass

<h3 class="md-block-header-three">Mitutoyo Holtest 62-75/0.005MM 368-171 </h3>

<h3>Mitutoyo Holtest 62-75/0.005MM 368-171 </h3>