APPROVED VENDOR

Iwata

Kyouiku Gear

MISUMI

TIGER BRAND PAINT

Mechanical Parts

mechanical-parts

Ball Bearings

ball-bearings

Engineering Materials & Industrial Hardware

engineering-materials-industrial-hardware

Connecting Components

connecting-components

Electricals

electricals

Mounting Brackets

mounting-brackets

Painting Materials

painting-materials

Primers, Sealers & Undercoats

primers-sealers-undercoats

Fasteners

fasteners

Screw

screw

Mechanical Power Transmissions

mechanical-power-transmissions

Worm & Pinion Gears

worm-pinion-gears

Grainger

ZPS72014C56 Shcs Aluminum 1/4 -20 3 15/16in L

zps72014c56 shcs aluminum 1/4 -20 15/16in aluminium screw approved vendor 15/16 英寸长 认可供应商

zps72014c56-shcs-aluminum-1-4-20-3-15-16in-l

ZPS72014C08 Shcs Aluminum 1/4 -20 15/16in L

zps72014c08 shcs aluminum 1/4 -20 15/16in aluminium screw approved vendor 15/16 英寸长 认可供应商

zps72014c08-shcs-aluminum-1-4-20-15-16in-l

ZPS72014C24 Shcs Aluminum 1/4 -20 1 15/16in L

zps72014c24 shcs aluminum 1/4 -20 15/16in aluminium screw approved vendor 15/16 英寸长 认可供应商

zps72014c24-shcs-aluminum-1-4-20-1-15-16in-l

Misumi C-ALKDU20-15 One-Touch Strut Clamps Perpendicular Aluminum Black Anodizing 

<h3 class="md-block-header-three">Misumi C-ALKDU20-15 One-Touch Strut Clamps Perpendicular Aluminum Black Anodizing </h3><ul class="md-block-unordered-list-item"><li>Type: Perpendicular</li><li>Post Dia.(mm): 20</li><li>Material: [Aluminum] Aluminum</li><li>Surface Treatment: Black Anodizing</li><li>Combined-Post Dia.: Unequal Dia.</li><li>Hole Dia. D1: 15</li></ul>

<h3>Misumi C-ALKDU20-15 One-Touch Strut Clamps Perpendicular Aluminum Black Anodizing&nbsp;</h3>
<ul>
<li>Type: Perpendicular</li>
<li>Post Dia.(mm): 20</li>
<li>Material: [Aluminum] Aluminum</li>
<li>Surface Treatment: Black Anodizing</li>
<li>Combined-Post Dia.: Unequal Dia.</li>
<li>Hole Dia. D1: 15</li>
</ul>

Timing Belts

Suction cups

Timing Pulleys

Safety Fences

Pneumatic Guided Cylinders

Oil Free Bushings

Square End Mills 

Shaft Couplings

Electric Linear Actuators

Misumi 

buyerIntroduction

Misumi C-ALKDU20-15 One-Touch Strut Clamps Perpendicular Aluminum Black Anodizing

misumi c-alkdu20-15 one-touch strut clamps perpendicular aluminum black anodizing klem sekali sentuh aluminium tegak lurus anodisasi hitam connecting components pengapit tupang satu sentuhan beranodisasi serenjang misumi/米思米 单触式支柱夹垂直铝黑色阳极氧化 米思米

misumi-c-alkdu20-15-one-touch-strut-clamps-perpendicular-aluminum-black-anodizing

Misumi LBLSS2020-15-SET Angled Brackets for 20 Aluminum Frames A6063-T5 2020 European Standard

misumi lblss2020-15-set angled brackets 20 aluminum frames a6063-t5 2020 european standard braket miring untuk rangka aluminium standar eropa mounting pemasangan kurungan bersudut bingkai eropah pendakap misumi/米思米 角形支架，适用于 个铝框 欧洲标准 安装支架 米思米

misumi-lblss2020-15-set-angled-brackets-for-20-aluminum-frames-a6063-t5-2020-european-standard

Misumi LBLSS2020-15 Angled Brackets for 20 Aluminum Frames A6063-T5 2020 European Standard

misumi lblss2020-15 angled brackets 20 aluminum frames a6063-t5 2020 european standard braket miring untuk rangka aluminium standar eropa mounting pemasangan kurungan bersudut bingkai eropah pendakap misumi/米思米 个铝制框架的角形支架 欧洲标准 安装支架 米思米

misumi-lblss2020-15-angled-brackets-for-20-aluminum-frames-a6063-t5-2020-european-standard

Misumi C-HLKDU20-15 One-Touch Strut Clamps Perpendicular Aluminum White Anodizing 

<h3 class="md-block-header-three">Misumi C-HLKDU20-15 One-Touch Strut Clamps Perpendicular Aluminum White Anodizing </h3><ul class="md-block-unordered-list-item"><li>Type: Perpendicular</li><li>Post Dia.(mm): 20</li><li>Material: [Aluminum] Aluminum</li><li>Surface Treatment: White Anodizing</li><li>Combined-Post Dia.: Unequal Dia.</li><li>Hole Dia. D1: 15</li></ul>

<h3>Misumi C-HLKDU20-15 One-Touch Strut Clamps Perpendicular Aluminum White Anodizing&nbsp;</h3>
<ul>
<li>Type: Perpendicular</li>
<li>Post Dia.(mm): 20</li>
<li>Material: [Aluminum] Aluminum</li>
<li>Surface Treatment: White Anodizing</li>
<li>Combined-Post Dia.: Unequal Dia.</li>
<li>Hole Dia. D1: 15</li>
</ul>

Misumi C-HLKDU20-15 One-Touch Strut Clamps Perpendicular Aluminum White Anodizing

misumi c-hlkdu20-15 one-touch strut clamps perpendicular aluminum white anodizing klem penyangga satu sentuhan aluminium tegak lurus anodisasi putih connecting components pengapit tupang serenjang misumi/米思米 单触式支柱夹垂直铝白色阳极氧化 米思米

misumi-c-hlkdu20-15-one-touch-strut-clamps-perpendicular-aluminum-white-anodizing

Kyouiku Gear (KG), G2A20R2=15, Worm wheel, Module 2, Aluminium bronze casting CAC702, 20 teeth, right hand double thread, 15mm bore dia, 20mm face width, 47mm OD, 5x2.3mm keyway.

Kyouiku Gear (KG),&nbsp;
G2A20R2=15,&nbsp;
Worm wheel,&nbsp;
Module 2,&nbsp;
Aluminium bronze casting CAC702,&nbsp;
20 teeth,&nbsp;
right hand double thread,&nbsp;
15mm bore dia,&nbsp;
20mm face width,&nbsp;
47mm OD,&nbsp;
5x2.3mm keyway.

datasheet G2A20R2=15

Spur Gears

Mitre & Bevel Gears

Sprockets

Aw Kai Ren (Johnny)

Kyouiku Gear (kg), G2A20R2=15, Worm Wheel, Module 2, Aluminium Bronze Casting CAC702, 20 Teeth, Right Hand Double Thread, 15mm Bore Dia, 20mm Face Width, 47mm Od, 5x2.3mm Keyway

kyouiku gear (kg), g2a20r2=15, worm wheel, module 2, aluminium bronze casting cac702, 20 teeth, right hand double thread, 15mm bore dia, 20mm face width, 47mm od, 5x2.3mm keyway perlengkapan roda cacing, modul pengecoran perunggu gigi, benang ganda tangan kanan, diameter lubang 15mm, lebar muka 20mm, od 47mm, alur pasak pinion gears tuangan gangsa berganda bor kekunci gear/机械齿轮 (kg)，g2a20r2=15，蜗轮，模块 2，铝青铜铸件 cac702，20 齿，右旋双螺纹，15mm 孔径，20mm 面宽，47mm 外径，5x2.3mm 键槽 机械齿轮

kyouiku-gear-kg-g2a20r2-15-worm-wheel-module-2-aluminium-bronze-casting-cac702-20-teeth-right-hand-double-thread-15mm-bore-dia-20mm-face-width-47mm-od-5x2-3mm-keyway

Kyouiku Gear (KG), G1.5A20R1-8, Worm wheel, Module 1.5, Aluminium bronze casting CAC702, 20 teeth, right hand single thread, 8mm bore dia, 15mm face width, 35.3mm OD.

Kyouiku Gear (KG),&nbsp;
G1.5A20R1-8,&nbsp;
Worm wheel,&nbsp;
Module 1.5,&nbsp;
Aluminium bronze casting CAC702,&nbsp;
20 teeth,&nbsp;
right hand single thread,&nbsp;
8mm bore dia,&nbsp;
15mm face width,&nbsp;
35.3mm OD.

datasheet G1.5A20R1-8

Kyouiku Gear (kg), G1.5A20R1-8, Worm Wheel, Module 1.5, Aluminium Bronze Casting CAC702, 20 Teeth, Right Hand Single Thread, 8mm Bore Dia, 15mm Face Width, 35.3mm Od.

kyouiku gear (kg), g1.5a20r1-8, worm wheel, module 1.5, aluminium bronze casting cac702, 20 teeth, right hand single thread, 8mm bore dia, 15mm face width, 35.3mm od. roda cacing, modul pengecoran perunggu gigi, benang tunggal tangan kanan, diameter lubang 8mm, lebar muka 15mm, od 35,3mm. pinion gears tuangan gangsa bor 35.3mm. gear/机械齿轮 齿轮（公斤），g1.5a20r1-8，蜗轮，模数 1.5，铝青铜铸件 cac702，20 齿，右旋单螺纹，8mm 孔径，15mm 面宽，35.3mm 外径。 机械齿轮

kyouiku-gear-kg-g1-5a20r1-8-worm-wheel-module-1-5-aluminium-bronze-casting-cac702-20-teeth-right-hand-single-thread-8mm-bore-dia-15mm-face-width-35-3mm-od

Kyouiku Gear (KG), G1.5A20L1-8, Worm wheel, Module 1.5, Aluminium bronze casting CAC702, 20 teeth, left hand single thread, 8mm bore dia, 15mm face width, 35.3mm OD.

Kyouiku Gear (KG),&nbsp;
G1.5A20L1-8,&nbsp;
Worm wheel,&nbsp;
Module 1.5,&nbsp;
Aluminium bronze casting CAC702,&nbsp;
20 teeth,&nbsp;
left hand single thread,&nbsp;
8mm bore dia,&nbsp;
15mm face width,&nbsp;
35.3mm OD.

datasheet G1.5A20L1-8

Kyouiku Gear (kg), G1.5A20L1-8, Worm Wheel, Module 1.5, Aluminium Bronze Casting CAC702, 20 Teeth, Left Hand Single Thread, 8mm Bore Dia, 15mm Face Width, 35.3mm Od.

kyouiku gear (kg), g1.5a20l1-8, worm wheel, module 1.5, aluminium bronze casting cac702, 20 teeth, left hand single thread, 8mm bore dia, 15mm face width, 35.3mm od. roda cacing, modul pengecoran perunggu gigi, benang tunggal tangan kiri, diameter lubang 8mm, lebar muka 15mm, od 35,3mm. pinion gears tuangan gangsa bor 35.3mm. gear/机械齿轮 齿轮（公斤），g1.5a20l1-8，蜗轮，模数 1.5，铝青铜铸件 cac702，20 齿，左旋单螺纹，8mm 孔径，15mm 面宽，35.3mm 外径。 机械齿轮

kyouiku-gear-kg-g1-5a20l1-8-worm-wheel-module-1-5-aluminium-bronze-casting-cac702-20-teeth-left-hand-single-thread-8mm-bore-dia-15mm-face-width-35-3mm-od

Entered into force of the strong standard slit collar

Fastening force for clamping in-plane is strong, difficult to type is scratch the shaft

Use in a fixed, such as a sprocket or gear

Holes or screw holes Engineering is also possible

Hex Socket Head Cap Screw (SUSXM7) - 1 Piece

<h3 class="md-block-header-three">Features:</h3><ul class="md-block-unordered-list-item"><li>Entered into force of the strong standard slit collar</li><li>Fastening force for clamping in-plane is strong, difficult to type is scratch the shaft</li><li>Use in a fixed, such as a sprocket or gear</li><li>Holes or screw holes Engineering is also possible</li><li>Material is aluminium</li></ul><h3 class="md-block-header-three">Specification:</h3><ul class="md-block-unordered-list-item"><li>Brand: Iwata</li><li>Product Type: Slit Collar</li><li>Material: Aluminium A2017</li><li>Inner Diameter (φB): 30 mm</li><li>Width (L): 15 mm</li><li>Outer Diameter (φD): 55 mm</li><li>W: 1.5 mm</li><li>X: 20 mm</li><li>Y: 10 mm</li><li>Tightening Screw (M): M6x25</li></ul><h3 class="md-block-header-three">Accessories:</h3><ul class="md-block-unordered-list-item"><li>Hex Socket Head Cap Screw (SUSXM7) - 1 Piece</li></ul>

<h3>Features:</h3>
<ul>
<li>Entered into force of the strong standard slit collar</li>
<li>Fastening force for clamping in-plane is strong, difficult to type is scratch the shaft</li>
<li>Use in a fixed, such as a sprocket or gear</li>
<li>Holes or screw holes Engineering is also possible</li>
<li>Material is aluminium</li>
</ul>
<h3>Specification:</h3>
<ul>
<li>Brand: Iwata</li>
<li>Product Type: Slit Collar</li>
<li>Material: Aluminium A2017</li>
<li>Inner Diameter (φB): 30 mm</li>
<li>Width (L): 15 mm</li>
<li>Outer Diameter (φD): 55 mm</li>
<li>W: 1.5 mm</li>
<li>X: 20 mm</li>
<li>Y: 10 mm</li>
<li>Tightening Screw (M): M6x25</li>
</ul>
<h3>Accessories:</h3>
<ul>
<li>Hex Socket Head Cap Screw (SUSXM7) - 1 Piece</li>
</ul>

IT Accessories

Hooks & Eyes

Machinery Accessories

Leland Tan

Iwata Aluminium Standard Slit Collar 30mm X 15mm SCS3015A

iwata aluminium standard slit collar 30mm x 15mm scs3015a ball bearings bearing kolar bebola iwata/岩田 铝制标准领30mm 球轴承 岩田

iwata-aluminium-standard-slit-collar-30mm-x-15mm-scs3015a

Detachable Strong tightening force for tightening in-plane, it is hard to type scratch the shaft

Sprocket or you can use a fixed, such as a gear

Holes or screw holes Correspondence is also possible

Hex Socket Head Cap Screw (SUSXM7) - 2 Piece

<h3 class="md-block-header-three">Features:</h3><ul class="md-block-unordered-list-item"><li>Easy to standard separate Collar</li><li>Detachable Strong tightening force for tightening in-plane, it is hard to type scratch the shaft</li><li>Sprocket or you can use a fixed, such as a gear</li><li>Holes or screw holes Correspondence is also possible</li><li>Material is aluminium</li></ul><h3 class="md-block-header-three">Specification:</h3><ul class="md-block-unordered-list-item"><li>Brand: Iwata</li><li>Product Type: Separate Collar</li><li>Material: Aluminium A2017</li><li>Inner Diameter (φB): 30 mm</li><li>Width (L): 15 mm</li><li>Outer Diameter (φD): 55 mm</li><li>W: 1.5 mm</li><li>X: 20 mm</li><li>Y: 10 mm</li><li>Tightening Screw (M): M6x25</li></ul><h3 class="md-block-header-three">Accessories:</h3><ul class="md-block-unordered-list-item"><li>Hex Socket Head Cap Screw (SUSXM7) - 2 Piece</li></ul>

<h3>Features:</h3>
<ul>
<li>Easy to standard separate Collar</li>
<li>Detachable Strong tightening force for tightening in-plane, it is hard to type scratch the shaft</li>
<li>Sprocket or you can use a fixed, such as a gear</li>
<li>Holes or screw holes Correspondence is also possible</li>
<li>Material is aluminium</li>
</ul>
<h3>Specification:</h3>
<ul>
<li>Brand: Iwata</li>
<li>Product Type: Separate Collar</li>
<li>Material: Aluminium A2017</li>
<li>Inner Diameter (φB): 30 mm</li>
<li>Width (L): 15 mm</li>
<li>Outer Diameter (φD): 55 mm</li>
<li>W: 1.5 mm</li>
<li>X: 20 mm</li>
<li>Y: 10 mm</li>
<li>Tightening Screw (M): M6x25</li>
</ul>
<h3>Accessories:</h3>
<ul>
<li>Hex Socket Head Cap Screw (SUSXM7) - 2 Piece</li>
</ul>

Iwata Aluminium Standard Separate Collar 30mm X 15mm SCSS3015A

iwata aluminium standard separate collar 30mm x 15mm scss3015a terpisah ball bearings bearing kolar berasingan bebola iwata/岩田 铝制标准项圈30mm 球轴承 岩田

iwata-aluminium-standard-separate-collar-30mm-x-15mm-scss3015a

Kyouiku Gear (KG), G2A20R1-10, Worm wheel, Module 2, Aluminium bronze casting CAC702, 20 teeth, right hand single thread, 10mm bore dia, 20mm face width, 47mm OD.

Kyouiku Gear (KG),&nbsp;
G2A20R1-10,&nbsp;
Worm wheel,&nbsp;
Module 2,&nbsp;
Aluminium bronze casting CAC702,&nbsp;
20 teeth,&nbsp;
right hand single thread,&nbsp;
10mm bore dia,&nbsp;
20mm face width,&nbsp;
47mm OD.

datasheet G2A20R1-10

Kyouiku Gear (kg), G2A20R1-10, Worm Wheel, Module 2, Aluminium Bronze Casting CAC702, 20 Teeth, Right Hand Single Thread, 10mm Bore Dia, 20mm Face Width, 47mm Od.

kyouiku gear (kg), g2a20r1-10, worm wheel, module 2, aluminium bronze casting cac702, 20 teeth, right hand single thread, 10mm bore dia, 20mm face width, 47mm od. roda cacing, modul pengecoran perunggu gigi, benang tunggal tangan kanan, diameter lubang 10mm, lebar muka 20mm, od 47mm. pinion gears tuangan gangsa bor gear/机械齿轮 齿轮（公斤），g2a20r1-10，蜗轮，模块 2，铝青铜铸件 cac702，20 齿，右旋单螺纹，10mm 孔径，20mm 面宽，47mm 外径。 机械齿轮

kyouiku-gear-kg-g2a20r1-10-worm-wheel-module-2-aluminium-bronze-casting-cac702-20-teeth-right-hand-single-thread-10mm-bore-dia-20mm-face-width-47mm-od

Tiger Brand 5L/16L Tiger Aluminum Paint (AP-203)

Tiger Brand Aluminum AP-203 is a single component based alkyd finish for both exterior and interior use. 

Tiger Brand Aluminum 203 is a silver-coloured topcoat for use on steel and wood substrates. 

Suitably for use direct on steel or primed steel. 

 Easy to apply with good hiding power. 

 Excellent color retention for both exterior and interior. 

Tiger Brand Aluminum AP-203 could be applied directly to freshly blasted steel. *Could also be used on well prepared steel with existing or aged two-component coatings. The temperature of the substrate should be at least 3oCelcius above the dew point. 

Can be applied by either airless or conventional spray. Tiger Brand Aluminium AP-203 can be applied by roller or brush, however, multiple coats may be needed to achieve the recommended film thickness. 

Recommended Wet film thickness: 110 microns 

Spreading rate: 9 m2/litre (calculated) Aluminum Paint AP-203 

If thinning is required please use Thinner 237 up to 10% part by weight. 

All equipment should be thoroughly cleaned with Thinner 237 after use. 

The product comes in both 1, 3.5, 5 and 20 litres packing. Must be stored in cool well ventilated area away from direct sunlight. 

Do not inhale spray mist. Remove all contaminated clothing and wash skin with suitable proprietary cleaners or soap and water. In case of contact with eyes, flush immediately with water for at least 15 minutes. If persistent discomfort or irritation occurs after application please seek medical advice. 

*It is the responsibility of the clients to ensure that there is no wrinkling or delamination of aged or existing coating by Tiger Brand Aluminum 237 

<h3 class="md-block-header-three">Tiger Brand 5L/16L Tiger Aluminum Paint (AP-203)</h3>TECHNICAL DATA SHEET Tiger Brand Aluminum AP-203 Solvent Based Alkyd Aluminum Paint DESCRIPTION: Tiger Brand Aluminum AP-203 is a single component based alkyd finish for both exterior and interior use. TYPICAL USES: Tiger Brand Aluminum 203 is a silver-coloured topcoat for use on steel and wood substrates. SUBSTRATES/SURFACES: Suitably for use direct on steel or primed steel. ADVANTAGES:  Easy to apply with good hiding power.  Excellent color retention for both exterior and interior.  Excellent weatherability.  Good hiding power. TECHNICAL DATA @ 250C: Colour: Sliver Volume Solids: 32.0% Viscosity 60.5 KU (+/-) 2.0 Specific Gravity 1.00 (+/-) 0.15 Dry to touch: 1 hour Hard Dry 4 hours DIRECTIONS FOR USE: Surface Preparation Tiger Brand Aluminum AP-203 could be applied directly to freshly blasted steel. *Could also be used on well prepared steel with existing or aged two-component coatings. The temperature of the substrate should be at least 3oCelcius above the dew point. Application Can be applied by either airless or conventional spray. Tiger Brand Aluminium AP-203 can be applied by roller or brush, however, multiple coats may be needed to achieve the recommended film thickness. Spreading Information Recommended Wet film thickness: 110 microns Dry film thickness: 40 microns Spreading rate: 9 m2/litre (calculated) Aluminum Paint AP-203 Thinning If thinning is required please use Thinner 237 up to 10% part by weight. Cleaning All equipment should be thoroughly cleaned with Thinner 237 after use. PACKAGING AND STORAGE: The product comes in both 1, 3.5, 5 and 20 litres packing. Must be stored in cool well ventilated area away from direct sunlight. HEALTH AND SAFETY: Do not inhale spray mist. Remove all contaminated clothing and wash skin with suitable proprietary cleaners or soap and water. In case of contact with eyes, flush immediately with water for at least 15 minutes. If persistent discomfort or irritation occurs after application please seek medical advice. *It is the responsibility of the clients to ensure that there is no wrinkling or delamination of aged or existing coating by Tiger Brand Aluminum 237

<h3>Tiger Brand 5L/16L Tiger Aluminum Paint (AP-203)</h3>
TECHNICAL DATA SHEET&nbsp;
Tiger Brand Aluminum AP-203&nbsp;
Solvent Based Alkyd Aluminum Paint&nbsp;
DESCRIPTION:&nbsp;
Tiger Brand Aluminum AP-203 is a single component based alkyd finish for both exterior and interior use.&nbsp;
TYPICAL USES:&nbsp;
Tiger Brand Aluminum 203 is a silver-coloured topcoat for use on steel and wood substrates.&nbsp;
SUBSTRATES/SURFACES:&nbsp;
Suitably for use direct on steel or primed steel.&nbsp;
ADVANTAGES:&nbsp;
 Easy to apply with good hiding power.&nbsp;
 Excellent color retention for both exterior and interior.&nbsp;
 Excellent weatherability.&nbsp;
 Good hiding power.&nbsp;
TECHNICAL DATA @ 250C:&nbsp;
Colour: Sliver&nbsp;
Volume Solids: 32.0%&nbsp;
Viscosity 60.5 KU (+/-) 2.0&nbsp;
Specific Gravity 1.00 (+/-) 0.15&nbsp;
Dry to touch: 1 hour&nbsp;
Hard Dry 4 hours&nbsp;
DIRECTIONS FOR USE:&nbsp;
Surface Preparation&nbsp;
Tiger Brand Aluminum AP-203 could be applied directly to freshly blasted steel. *Could also be used on well prepared steel with existing or aged two-component coatings. The temperature of the substrate should be at least 3oCelcius above the dew point.&nbsp;
Application&nbsp;
Can be applied by either airless or conventional spray. Tiger Brand Aluminium AP-203 can be applied by roller or brush, however, multiple coats may be needed to achieve the recommended film thickness.&nbsp;
Spreading Information&nbsp;
Recommended Wet film thickness: 110 microns&nbsp;
Dry film thickness: 40 microns&nbsp;
Spreading rate: 9 m2/litre (calculated) Aluminum Paint AP-203&nbsp;
Thinning&nbsp;
If thinning is required please use Thinner 237 up to 10% part by weight.&nbsp;
Cleaning&nbsp;
All equipment should be thoroughly cleaned with Thinner 237 after use.&nbsp;
PACKAGING AND STORAGE:&nbsp;
The product comes in both 1, 3.5, 5 and 20 litres packing. Must be stored in cool well ventilated area away from direct sunlight.&nbsp;
HEALTH AND SAFETY:&nbsp;
Do not inhale spray mist. Remove all contaminated clothing and wash skin with suitable proprietary cleaners or soap and water. In case of contact with eyes, flush immediately with water for at least 15 minutes. If persistent discomfort or irritation occurs after application please seek medical advice.&nbsp;
*It is the responsibility of the clients to ensure that there is no wrinkling or delamination of aged or existing coating by Tiger Brand Aluminum 237&nbsp;

Ms Mah

Tiger Brand 5l Tiger Aluminum Paint (AP-203)

tiger brand 5l aluminum paint (ap-203) cat alumunium merk primers, sealers undercoats primer, sealer lapisan bawah aluminium asas, pengedap alas paint/老虎品牌油漆 虎牌5l虎铝漆（ap-203） 底漆，密封剂和底漆 老虎品牌油漆

tiger-brand-5l-tiger-aluminum-paint-ap-203

Weight

Kyouiku Gear (KG), G1.5A30R2-10, Worm wheel, Module 1.5, Aluminium bronze casting CAC702, 30 teeth, right hand double thread, 10mm bore dia, 15mm face width, 50.3mm OD.

Kyouiku Gear (KG),&nbsp;
G1.5A30R2-10,&nbsp;
Worm wheel,&nbsp;
Module 1.5,&nbsp;
Aluminium bronze casting CAC702,&nbsp;
30 teeth,&nbsp;
right hand double thread,&nbsp;
10mm bore dia,&nbsp;
15mm face width,&nbsp;
50.3mm OD.

datasheet G1.5A30R2-10

Kyouiku Gear (kg), G1.5A30R2-10, Worm Wheel, Module 1.5, Aluminium Bronze Casting CAC702, 30 Teeth, Right Hand Double Thread, 10mm Bore Dia, 15mm Face Width, 50.3mm Od.

kyouiku gear (kg), g1.5a30r2-10, worm wheel, module 1.5, aluminium bronze casting cac702, 30 teeth, right hand double thread, 10mm bore dia, 15mm face width, 50.3mm od. modul gigi, benang ganda tangan kanan, diameter lubang 10mm, lebar muka 15mm, od 50.3mm. pinion gears roda cacing, tuangan gangsa berganda bor gear/机械齿轮 齿轮（公斤），g1.5a30r2-10，蜗轮，模数 1.5，铝青铜铸件 cac702，30 齿，右旋双螺纹，10mm 孔径，15mm 面宽，50.3mm 外径。 机械齿轮

kyouiku-gear-kg-g1-5a30r2-10-worm-wheel-module-1-5-aluminium-bronze-casting-cac702-30-teeth-right-hand-double-thread-10mm-bore-dia-15mm-face-width-50-3mm-od

Aluminium bronze casting CAC702 and grey iron casting FC200, 

Kyouiku Gear (KG), G1.5A50R1-12, Worm wheel, Module 1.5, Aluminium bronze casting CAC702 and grey iron casting FC200, 50 teeth, right hand single thread, 12mm bore dia, 15mm face width, 80.3mm OD.

Kyouiku Gear (KG),&nbsp;
G1.5A50R1-12,&nbsp;
Worm wheel,&nbsp;
Module 1.5,&nbsp;
Aluminium bronze casting CAC702 and grey iron casting FC200,&nbsp;
50 teeth,&nbsp;
right hand single thread,&nbsp;
12mm bore dia,&nbsp;
15mm face width,&nbsp;
80.3mm OD.

datasheet G1.5A50R1-12

Kyouiku Gear (kg), G1.5A50R1-12, Worm Wheel, Module 1.5, Aluminium Bronze Casting CAC702 and Grey Iron Casting FC200, 50 Teeth, Right Hand Single Thread, 12mm Bore Dia, 15mm Face Width, 80.3mm Od.

kyouiku gear (kg), g1.5a50r1-12, worm wheel, module 1.5, aluminium bronze casting cac702 grey iron fc200, 50 teeth, right hand single thread, 12mm bore dia, 15mm face width, 80.3mm od. roda gigi cacing, modul pengecoran perunggu dan besi abu-abu gigi, benang tunggal tangan kanan, diameter lubang 12mm, lebar muka 15mm, od 80,3mm. pinion gears tuangan gangsa kelabu bor 80.3mm. gear/机械齿轮 齿轮（公斤），g1.5a50r1-12，蜗轮，模数 1.5，铝青铜铸件 和灰铁铸件 fc200，50 齿，右旋单螺纹，12mm 孔径，15mm 面宽，80.3mm 外径。 机械齿轮

kyouiku-gear-kg-g1-5a50r1-12-worm-wheel-module-1-5-aluminium-bronze-casting-cac702-and-grey-iron-casting-fc200-50-teeth-right-hand-single-thread-12mm-bore-dia-15mm-face-width-80-3mm-od

Kyouiku Gear (KG), G1.5A50R2-12, Worm wheel, Module 1.5, Aluminium bronze casting CAC702 and grey iron casting FC200, 50 teeth, right hand double thread, 12mm bore dia, 15mm face width, 80.3mm OD.

Kyouiku Gear (KG),&nbsp;
G1.5A50R2-12,&nbsp;
Worm wheel,&nbsp;
Module 1.5,&nbsp;
Aluminium bronze casting CAC702 and grey iron casting FC200,&nbsp;
50 teeth,&nbsp;
right hand double thread,&nbsp;
12mm bore dia,&nbsp;
15mm face width,&nbsp;
80.3mm OD.

datasheet G1.5A50R2-12

Kyouiku Gear (kg), G1.5A50R2-12, Worm Wheel, Module 1.5, Aluminium Bronze Casting CAC702 and Grey Iron Casting FC200, 50 Teeth, Right Hand Double Thread, 12mm Bore Dia, 15mm Face Width, 80.3mm Od.

kyouiku gear (kg), g1.5a50r2-12, worm wheel, module 1.5, aluminium bronze casting cac702 grey iron fc200, 50 teeth, right hand double thread, 12mm bore dia, 15mm face width, 80.3mm od. perlengkapan roda cacing, modul pengecoran perunggu dan besi abu-abu gigi, benang ganda tangan kanan, diameter lubang 12mm, lebar muka 15mm, od 80,3mm. pinion gears tuangan gangsa kelabu berganda bor 80.3mm. gear/机械齿轮 齿轮 (kg)，g1.5a50r2-12，蜗轮，模数 1.5，铝青铜铸件 和灰铁铸件 fc200，50 齿，右旋双螺纹，12mm 孔径，15mm 面宽，80.3mm 外径。 机械齿轮

kyouiku-gear-kg-g1-5a50r2-12-worm-wheel-module-1-5-aluminium-bronze-casting-cac702-and-grey-iron-casting-fc200-50-teeth-right-hand-double-thread-12mm-bore-dia-15mm-face-width-80-3mm-od

Kyouiku Gear (KG), G2A25R2-12, Worm wheel, Module 2, Aluminium bronze casting CAC702, 25 teeth, right hand double thread, 12mm bore dia, 20mm face width, 57mm OD.

Kyouiku Gear (KG),&nbsp;
G2A25R2-12,&nbsp;
Worm wheel,&nbsp;
Module 2,&nbsp;
Aluminium bronze casting CAC702,&nbsp;
25 teeth,&nbsp;
right hand double thread,&nbsp;
12mm bore dia,&nbsp;
20mm face width,&nbsp;
57mm OD.

datasheet G2A25R2-12

Kyouiku Gear (kg), G2A25R2-12, Worm Wheel, Module 2, Aluminium Bronze Casting CAC702, 25 Teeth, Right Hand Double Thread, 12mm Bore Dia, 20mm Face Width, 57mm Od.

kyouiku gear (kg), g2a25r2-12, worm wheel, module 2, aluminium bronze casting cac702, 25 teeth, right hand double thread, 12mm bore dia, 20mm face width, 57mm od. roda cacing, modul pengecoran perunggu gigi, benang ganda tangan kanan, diameter lubang 12mm, lebar muka 20mm, od 57mm. pinion gears tuangan gangsa berganda bor gear/机械齿轮 齿轮（公斤），g2a25r2-12，蜗轮，模块 2，铝青铜铸造 cac702，25 齿，右旋双螺纹，12mm 孔径，20mm 面宽，57mm 外径。 机械齿轮

kyouiku-gear-kg-g2a25r2-12-worm-wheel-module-2-aluminium-bronze-casting-cac702-25-teeth-right-hand-double-thread-12mm-bore-dia-20mm-face-width-57mm-od

Kyouiku Gear (KG), G2A50R1-14, Worm wheel, Module 2, Aluminium bronze casting CAC702 and grey iron casting FC200, 50 teeth, right hand single thread, 14mm bore dia, 20mm face width, 107mm OD.

Kyouiku Gear (KG),&nbsp;
G2A50R1-14,&nbsp;
Worm wheel,&nbsp;
Module 2,&nbsp;
Aluminium bronze casting CAC702 and grey iron casting FC200,&nbsp;
50 teeth,&nbsp;
right hand single thread,&nbsp;
14mm bore dia,&nbsp;
20mm face width,&nbsp;
107mm OD.

datasheet G2A50R1-14

Kyouiku Gear (kg), G2A50R1-14, Worm Wheel, Module 2, Aluminium Bronze Casting CAC702 and Grey Iron Casting FC200, 50 Teeth, Right Hand Single Thread, 14mm Bore Dia, 20mm Face Width, 107mm Od.

kyouiku gear (kg), g2a50r1-14, worm wheel, module 2, aluminium bronze casting cac702 grey iron fc200, 50 teeth, right hand single thread, 14mm bore dia, 20mm face width, 107mm od. perlengkapan roda cacing, modul pengecoran perunggu dan besi abu-abu gigi, benang tunggal tangan kanan, diameter lubang 14mm, lebar muka 20mm, od 107mm. pinion gears tuangan gangsa kelabu bor gear/机械齿轮 齿轮（公斤），g2a50r1-14，蜗轮，模块 2，铝青铜铸件 和灰铁铸件 fc200，50 齿，右旋单螺纹，14mm 孔径，20mm 面宽，107mm 外径。 机械齿轮

kyouiku-gear-kg-g2a50r1-14-worm-wheel-module-2-aluminium-bronze-casting-cac702-and-grey-iron-casting-fc200-50-teeth-right-hand-single-thread-14mm-bore-dia-20mm-face-width-107mm-od

Kyouiku Gear (KG), G2A30L2-12, Worm wheel, Module 2, Aluminium bronze casting CAC702, 30 teeth, left hand double thread, 12mm bore dia, 20mm face width, 67mm OD.

Kyouiku Gear (KG),&nbsp;
G2A30L2-12,&nbsp;
Worm wheel,&nbsp;
Module 2,&nbsp;
Aluminium bronze casting CAC702,&nbsp;
30 teeth,&nbsp;
left hand double thread,&nbsp;
12mm bore dia,&nbsp;
20mm face width,&nbsp;
67mm OD.

datasheet G2A30L2-12

Kyouiku Gear (kg), G2A30L2-12, Worm Wheel, Module 2, Aluminium Bronze Casting CAC702, 30 Teeth, Left Hand Double Thread, 12mm Bore Dia, 20mm Face Width, 67mm Od.

kyouiku gear (kg), g2a30l2-12, worm wheel, module 2, aluminium bronze casting cac702, 30 teeth, left hand double thread, 12mm bore dia, 20mm face width, 67mm od. roda cacing, modul pengecoran perunggu gigi, benang ganda tangan kiri, diameter lubang 12mm, lebar muka 20mm, od 67mm. pinion gears tuangan gangsa berganda bor gear/机械齿轮 齿轮 (kg)，g2a30l2-12，蜗轮，模块 2，铝青铜铸件 cac702，30 齿，左旋双螺纹，12mm 孔径，20mm 面宽，67mm 外径。 机械齿轮

kyouiku-gear-kg-g2a30l2-12-worm-wheel-module-2-aluminium-bronze-casting-cac702-30-teeth-left-hand-double-thread-12mm-bore-dia-20mm-face-width-67mm-od

right hand double thread, 14mm bore dia, 20mm face width, 107mm OD.

Kyouiku Gear (KG), G2A50R2-14, Worm wheel, Module 2, Aluminium bronze casting CAC702 and grey iron casting FC200, 50 teeth, right hand double thread, 14mm bore dia, 20mm face width, 107mm OD.

Kyouiku Gear (KG),&nbsp;
G2A50R2-14,&nbsp;
Worm wheel,&nbsp;
Module 2,&nbsp;
Aluminium bronze casting CAC702 and grey iron casting FC200,&nbsp;
50 teeth,&nbsp;
right hand double thread, 14mm bore dia, 20mm face width, 107mm OD.

datasheet G2A50R2-14

Kyouiku Gear (kg), G2A50R2-14, Worm Wheel, Module 2, Aluminium Bronze Casting CAC702 and Grey Iron Casting FC200, 50 Teeth, Right Hand Double Thread, 14mm Bore Dia, 20mm Face Width, 107mm Od.

kyouiku gear (kg), g2a50r2-14, worm wheel, module 2, aluminium bronze casting cac702 grey iron fc200, 50 teeth, right hand double thread, 14mm bore dia, 20mm face width, 107mm od. perlengkapan roda cacing, modul pengecoran perunggu dan besi abu-abu gigi, benang ganda tangan kanan, diameter lubang 14mm, lebar muka 20mm, od 107mm. pinion gears tuangan gangsa kelabu berganda bor gear/机械齿轮 齿轮（公斤），g2a50r2-14，蜗轮，模块 2，铝青铜铸件 和灰铁铸件 fc200，50 齿，右旋双螺纹，14mm 孔径，20mm 面宽，107mm 外径。 机械齿轮

kyouiku-gear-kg-g2a50r2-14-worm-wheel-module-2-aluminium-bronze-casting-cac702-and-grey-iron-casting-fc200-50-teeth-right-hand-double-thread-14mm-bore-dia-20mm-face-width-107mm-od

Kyouiku Gear (KG), G2A30R2-12, Worm wheel, Module 2, Aluminium bronze casting CAC702, 30 teeth, right hand double thread, 12mm bore dia, 20mm face width, 67mm OD.

Kyouiku Gear (KG),&nbsp;
G2A30R2-12,&nbsp;
Worm wheel,&nbsp;
Module 2,&nbsp;
Aluminium bronze casting CAC702,&nbsp;
30 teeth,&nbsp;
right hand double thread,&nbsp;
12mm bore dia,&nbsp;
20mm face width,&nbsp;
67mm OD.

datasheet G2A30R2-12

Kyouiku Gear (kg), G2A30R2-12, Worm Wheel, Module 2, Aluminium Bronze Casting CAC702, 30 Teeth, Right Hand Double Thread, 12mm Bore Dia, 20mm Face Width, 67mm Od.

kyouiku gear (kg), g2a30r2-12, worm wheel, module 2, aluminium bronze casting cac702, 30 teeth, right hand double thread, 12mm bore dia, 20mm face width, 67mm od. roda cacing, modul pengecoran perunggu gigi, benang ganda tangan kanan, diameter lubang 12mm, lebar muka 20mm, od 67mm. pinion gears tuangan gangsa berganda bor gear/机械齿轮 齿轮（公斤），g2a30r2-12，蜗轮，模块 2，铝青铜铸件 cac702，30 齿，右旋双螺纹，12mm 孔径，20mm 面宽，67mm 外径。 机械齿轮

kyouiku-gear-kg-g2a30r2-12-worm-wheel-module-2-aluminium-bronze-casting-cac702-30-teeth-right-hand-double-thread-12mm-bore-dia-20mm-face-width-67mm-od

Kyouiku Gear (KG), G2A30R1-12, Worm wheel, Module 2, Aluminium bronze casting CAC702, 30 teeth, right hand single thread, 12mm bore dia, 20mm face width, 67mm OD.

Kyouiku Gear (KG),&nbsp;
G2A30R1-12,&nbsp;
Worm wheel,&nbsp;
Module 2,&nbsp;
Aluminium bronze casting CAC702,&nbsp;
30 teeth,&nbsp;
right hand single thread,&nbsp;
12mm bore dia,&nbsp;
20mm face width,&nbsp;
67mm OD.

datasheet G2A30R1-12

Kyouiku Gear (kg), G2A30R1-12, Worm Wheel, Module 2, Aluminium Bronze Casting CAC702, 30 Teeth, Right Hand Single Thread, 12mm Bore Dia, 20mm Face Width, 67mm Od.

kyouiku gear (kg), g2a30r1-12, worm wheel, module 2, aluminium bronze casting cac702, 30 teeth, right hand single thread, 12mm bore dia, 20mm face width, 67mm od. roda cacing, modul pengecoran perunggu gigi, ulir tunggal tangan kanan, diameter lubang 12mm, lebar muka 20mm, od 67mm. pinion gears tuangan gangsa benang bor gear/机械齿轮 齿轮（公斤），g2a30r1-12，蜗轮，模块 2，铝青铜铸件 cac702，30 齿，右旋单螺纹，12mm 孔径，20mm 面宽，67mm 外径。 机械齿轮